HDP 380 Diesel driven pump unit with manual 3 speed ... · PDF file1800 2 900 260 27 14,500...
-
Upload
nguyenliem -
Category
Documents
-
view
216 -
download
2
Transcript of HDP 380 Diesel driven pump unit with manual 3 speed ... · PDF file1800 2 900 260 27 14,500...
*Example HDP 380 fuel consumption, Piston/Plunger-Ø 50 mm, CAT C15 TIER 4 FINAL 3 speed manual transmission
Engine speed rpm
Gear Pump speed rpm
Pump power rating
hp
Q gpm Flow rate
P psi
Operating pressure
Specific fuel
consumption lb/hp h
Motor power rating
kW
Fuel consumption
gph
1800 3 1800 516 54 14,500 0.337 540 25
1100 3 1100 313 33 14,500 0.345 340 17
1800 2 900 260 27 14,500 0.353 280 13
1100 2 550 156 17 14,500 0.362 170 8
1800 1 300 87 9 14,500 0.397 100 6
1100 1 183 53 5.5 14,500 0.432 67 4
This pump unit enables to you adapt the flow rate to suit the work you are doing. The 3 transmission ratios 1:1, 1:2 and 1:6 cover the most important areas of industrial cleaning. The biggest benefit for you is the reduced diesel fuel consumption as you only generate the power you actually need
For manual blasting gun work the high pressure pump shaft only rotates at 1/6 th of maximum engine speed thereby saving up to 48 litres of fuel per hour.* The low speed reduces wear on the pump and engine by operating in the partial load range
The environmental benefits include lower CO² and noise emissions
Lower torque on the engine in gears 2 and 3 at the same pressure
No hot overflow water to be returned to tank
Each gear is simply selected when the engine is not running
HDP 380 Diesel driven pump unit with manual 3 speed transmission only uses that energy needed for the job to be done.
3rd Gear Full pump power as typically employed for tank cleaning
2nd Gear Medium pump power for pipe and tube bundle cleaning
1st Gear Low pump power for manual blasting gun work
Fuel saving with transmission when working with a manual blasting gun 12.7 gph CO2reduction 274 lb/hour
Unit
Type
Pump
Typ
Op. pressure
[psi]
Flow- rate
[gpm]
Power rating [hp]
S 1100 - 38 HDP 382 14,500 53.86
510 S 1600 -38
HDP 383 22,620 33.79
HDP 383 17,840 44.35
Aquajet® 38 HDP 384 43,500 16.10 470
Rod force: 210 kN
Stroke: 2.95 inch
Mean piston speed at n2
340 1/min. = 2.82 f/sec
410 1/min. = 3.38 f/sec
490 1/min. = 4.04 f/sec
„S Class“ and „Aquajet“ units can be built into 20 ft. or 25 ft. sound damped containers, sound damped aluminium truck bodies or trailer containers (BDF).
All „S Class“ and „Aquajet“ units are complete with :
Rigid base frame with anti vibration mounting feet
Insulated spiral silencer installation (32 dB(A) reduction) with exhaust and rain cap, particle filter or Ad Blue
ES 2 electronic control and monitoring system with digital display for pump and diesel engine
Pneumatic system with shaft driven compressor, air tank and bypass control
Pneumatic pressure regulating valve or bypass valve
Stainless steel suction side installation with boost pump and water filter („S Class“: 200µ & 10µ „Aquajet“: 1 µ)
There are optional extras available which include pump head lifting device, heating systems, water tanks and fuel tanks. .
S 1100 - 38 to 14,500 psi
S 1600 - 38 to 22,620 psi
Aquajet® 38 to 43,500 psi
Type overview
The following data table shows just a few examples of maximum performance combinations from the wide range
Hammelmann Corp. 436 Southpointe Drive Phone (001) 937-859-8777 Miamisburg, Ohio 45342 Fax: (001) 937-859-9188 eMail: [email protected] http://www.hammelmann.com 11/15 © Copyright Hammelmann GmbH, Oelde, Germany. Subject to modification.
*Example HDP 500 fuel consumption, Piston/Plunger-Ø 50 mm, with VOLVO TAD 1672 VE TIER 4 FINAL and 3 speed manual transmission
Engine speed rpm
Gear Pump speed rpm
Pump power rating
hp
Q gpm Flow rate
P psi
Operatingpressure
Specific fuel
consumption lb/hp h
Motor power rating
hp
Fuel consumption
gp/h
1800 3 1800 680 69 15,000 0.337 700 33
1100 3 1100 410 42 15,000 0.317 430 19
1800 2 900 340 34 15,000 0.345 360 17
1100 2 550 210 21 15,000 0.329 225 10
1800 1 300 115 11 15,000 0.411 130 7.4
1100 1 183 70 7 15,000 0.395 84 4.8
This pump unit enables to you adapt the flow rate to suit the work you are doing. The 3 transmission ratios 1:1, 1:2 and 1:6 cover the most important areas of industrial cleaning. The biggest benefit for you is the reduced diesel fuel consumption as you only generate the power you actually need
For manual blasting gun work the high pressure pump shaft only rotates at 1/6 th of maximum engine speed thereby saving up to 54 litres of fuel per hour.* The low speed reduces wear on the pump and engine by operating in the partial load range
The environmental benefits include lower CO² and noise emissions
Lower torque on the engine in gears 2 and 3 at the same pressure
No hot overflow water to be returned to tank
Each gear is simply selected when the engine is not running
As variable as your cleaning applications HDP 500 Diesel driven pump unit with manual 3 speed transmission only uses that energy needed for the job to be done.
3rd Gear Full pump power as typically employed for tank cleaning
2nd Gear Medium pump power for pipe and tube bundle cleaning
1st Gear Low pump power for manual blasting gun work
Fuel saving with transmission when working with a manual blasting gun 14,3 gph CO2 reduction 308 lb/hour
Unit
Type
Pump
Typ
Op. pressure
[psi]
Flow- rate
[gpm]
Power rating [HP]
S 1100 - 50 HDP 502 15,080 69.17
670 S 1600 - 50
HDP 503 23,640 43.82
HDP 503 18,710 55.97
Aquajet® 50 HDP 504 43,500 20.33 600
Rod force: 210 kN
Stroke: 3.94 inch
Mean piston speed at n2
315 rpm = 3.48 f/sec
380 rpm = 4.17 f/sec
465 rpm = 5.05 f/sec
„S Class“ and „Aquajet“ units can be built into 20 ft. or 25 ft. sound dampedcontainers, sound damped aluminium truck bodies or trailer containers (BDF).
All „S Class“ and „Aquajet“ units are complete with : Rigid base frame with anti
vibration mounting feet
Insulated spiral silencer installation (32 dB(A) reduction) with exhaust and rain cap, particle filter or Ad Blue
ES 2 electronic control and monitoring system with digital display for pump and diesel engine
Pneumatic system with shaft driven compressor, air tank and bypass control
Pneumatic pressure regulating valve or bypass valve
Stainless steel suction side installation with boost pump and water filter („S Class“: 200µ & 10µ „Aquajet“: 1 µ)
There are optional extras available which include pump head lifting device, heating systems, water tanks and fuel tanks.
S 1100 - 50 to 15,080 psi
S 1600 - 50 to 23,640 psi
Aquajet® 50 to 43,500 psi
Type overview
The following data table shows just a few examples of maximum performance combinations from the wide range
Series HDP 500 Diesel driven high pressure pump unit with manual 3 speed transmission
Hammelmann Corp. 436 Southpointe Drive Phone (001) 937-859-8777 Miamisburg, Ohio 45342 Fax: (001) 937-859-9188 eMail: [email protected] http://www.hammelmann.com 11/15 © Copyright Hammelmann GmbH, Oelde, Germany. Subject to modification.