HDMI 2.0 Digital Ribbon Cables Video Products Group · HDMI 2.0 Digital Ribbon Cables FSR...
Transcript of HDMI 2.0 Digital Ribbon Cables Video Products Group · HDMI 2.0 Digital Ribbon Cables FSR...
HDMI 2.0 Digital Ribbon Cables
FSR Inc.
Video Products Group
NEX
T GEN
ERAT
ION
DIGITAL
RIBBO
N CAB
LES
FEATURESFEATURES• HDMI 2.0 with 4k@60Hz YUV 4:4:4 and HDCP 2.2 compliance.
• Overcomes distance limitations of conventional HDMI cables
• Competitive in cost to older cable types
• Signal integrity is uncompromised
• Multi format compatibility
• No external power or special tooling required
• Cable and connectors easily fit within a 1” conduit
• Plenum Rated - Type CMP/FT6
• UL Listed
• Supports DDC for HDCP and EDID
• Supports PCM, Dolby, DTS-HD and True HD audio
• ARC compatible
ORDERING INFORMATIONORDERING INFORMATION
FSR’s Next Generation Digital Ribbon Cables utilizea proprietary technology to allow high speed, highdefinition HDMI signal transmission over distancesof up to 328 ft. The cable is fitted with a discreetblack jacket that allows the cable to blend in afterinstallation. The hybrid fiber/copper cables deliver aspeed of 18 Gb/sec video bandwidth. They can eas-ily handle up to 4k 60Hz 4:4:4 HDR uncompressedHDMI video and are ARC compatible. The cablescome pre-terminated in convenient lengths.These advanced technology cables use four glassfibers, seven copper wires and supply the necessarypower to the embedded circuitry at both ends of thecable. They meet the HDMI 2.0 / HDCP 2.2 testingstandards. The connector shells are labeled"source" and "display" to aid in proper connections.
DESCRIPTIONDESCRIPTION
HDMI 2.0 Digital Ribbon Cables
DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION
Copper Conductors (5)
Aramid Fibers
Drain WireOverall Foil Shield
DDC/Clock Pair, Foil Shielded
Impedance Controlled Conductors (2)
Protective Fiber Tube
Fiber Conductors (4)
PVC Jacket
PlenumRated
NEX
T GEN
ERAT
ION
DIGITAL
RIBBO
N CAB
LES
FSR Inc.
SPECIFICATIONSSPECIFICATIONS
APPLICATIONSAPPLICATIONS
DIMENSIONSDIMENSIONS
Performance CharacteristicsVideo Connectors Male HDMIMaximum Length 328’ (100 meters)Cable Dimensions 0.2” (5mm) dia.UL Listing CMP/FT6Compliance RoHS, UL444, CSA C22.2 No. 214, UL 746AHDMI Cable Type High-Speed HDMITotal Power Consumption 0.25 WattsEndurance at Bend Radius Over 10k cycles at 2” (50 mm) RadiusMinimum Bend Radius 0.5” (13 mm)Maximum Tensile Load 50 lbs.
Environmental PerformanceOperating Temperature Range +32º F to +122º F (0 º to +50ºC)Maximum Operating Humidity 85%Storage Temperature Range -22º to +122º F (-30º to +50ºC)
Product Specifications• Up to 4k 60Hz 4:4:4
•HDR uncompressed HDMI video• 3D • HDMI-CEC• Deep Color • ARC compatible
• 18 Gb/sec video bandwidth
DIG ITAL R IBBON CABLES
4k 60Hz 4:4:4 operation requires a direct source to display connection with no passive extension cables.
DVD PLAYER (SOURCE)
SO
UR
CE D
ISP
LAY
DISPLAY
DIS
PLA
Y
SO
UR
CE
SOURCE CABLE END DISPLAY CABLE END
DR-H2.0-xxM BLACK AOCPASSIVE INPUT CABLE10’ MAXIMUM LENGTH
COUPLERMAXIMUM 2 PER SYSTEM
USE 1”ID OR GREATER CONDUIT
PASSIVE OUTPUT CABLE 10’ MAXIMUM LENGTH
COUPLERMAXIMUM 2 PER SYSTEM
NOTE: IT IS POSSIBLE TO USE LONGER CABLES AND MORE THAN TWO COUPLERS BUT WHEN EXCEEDINGTHE RECOMMENDED PARAMETERS, THE SYSTEM SHOULD BE PRETESTED PRIOR TO FINAL INSTALLATION. ALWAYS MINIMIZE LENGTH AND NUMBER OF EXTENSION CABLES USED.
ANY COILED SERVICE LOOPS 8” MINIMUM DIAMETER.
IMPORTANT:Do not use any pullingmethod that will result in alocalized twisting of the cableor damage will result and thewarranty will be voided.
**4k 60Hz 4:4:4 performance requires a direct connection from source to display.
.79
.43
2.50
.41
Ø.18
1.87
1.50 .37
1.90
.90
.35
WWW.FS
RINC.COM
The DR-SOCKis perfect protection for pulling pre-connectorizedcable through conduit, andcan be used over and over.
connectorized
over and over.
DR-SOCKCABLE PULLING SOCK
TM
TM