HDL-KNX .catalog .2013.10.17.pdf

7/27/2019 HDL-KNX .catalog .2013.10.17.pdf

http://slidepdf.com/reader/full/hdl-knx-catalog-20131017pdf 1/27



4 Channel Dry Contact SensorMS 041

KNX HVAC ControllerM/FCU01.10.1

Speci f ications Specif ications

HVAC Controller is one of the products in HDL KNX/EIB serials. With functions of heating control, cooling control, fan speed control: options

include high, medium, low, etc. HDL HVAC controller supports 7 independent floor heating control channel, works with digital temperature

sensor can calculate the specific temperature. HDL HVAC controller has 5 relay output channel and two 0-10V output channel.

Dry contact output and input sensor is one of the products in HDL KNX/EIB serials. It includes a 4 channel signal input and a 4 channel signal

output. The signal input channel can receive the signal f rom the temperat ure sensor and from the dry contact s ensor; it offers an output DC 0-

10v dimming signal or drive the LED status channel.

This module including the functions of temperature collection, dry contact input, 5 logic output, 0-10 V dimming, sensor, LED driver function, etc.

Control way including relay control, dimming control, curtain control, scene control, etc. In a logic control process each logic combines with 4 signal

input channels.

+TS/C 1.0

Digital temperature sensor

Working voltage：21-30V DC

BUS interface: KNX/EIB

Dynamic current: <20mA

Static current: <5mA

Dynamic power consumption : <450mW

Static power consumption : <150Mw

Rated current：250V AC(50/60Hz)

Relay current: 10A

Relay electrical life：>100000 times

Relay mechanical life：>1000000 times

Working voltage：21-30V DC

BUS interface: KNX/EIB

Dynamic current: <25mA

Static current: <5mA

Channel output Voltage ：0-10V

Channel output current：3 mA

Input sensor type: Switch/Temperature sensor

The dry contact sensor works with the temperature

sensor to collect and report the temperature.

+TTS/APR 1.0

Temperature sensor

HVAC Module works with a digital temperature sensor,

It can use maximum up to 7 Digital temperature sensors

to collect different position temperature to calculate an

average temperature. With HVAC control to create an

energy saving and comfortable environment

Channel runtime statistics

Channel status response

Power on recovery

Power down status

Staircase light

Switch delay

Protection delay

PWM control output

5 channel 10 A relay output

2 channel 0~10V output

Fan speed : High, medium, low

HVAC working mode : Cooling, heating

HVAC operation mode : Comfort

mode, Standby mode, Night mode,

Frost/heat protection mode

Fan speed, valve status report

Local 7 channel temperature collection

Bus temperature collection

Local temperature report

7 channel independent f loor heating control

7 channel independent control output

5 floor heating control mode / channel

Switch control

Dimming control

Shutter control

Flexible control

Scene control

Sequence control

Percentage control

Threshold control

String control

Forced control

PWM output

5 Logic control

Counting control

Combination control

LED status indicator

Alarm control

Loop time Open statistics

Channel status response

Power-state recovery, stair lights

Flashing function

Scene save , scene dimming

Threshold switch

Heating control

0-10V dimming



KNX产品目录A

HDL-KNX .catalog .2013.10.17.pdf

Documents

Transcript of HDL-KNX .catalog .2013.10.17.pdf