HDCVI CONFIGURATION

1.LAN CONFIGURATION

2.ROUTER CONFIGURATION

3.DDNS AND P2P CONFIGURATION

4.SMART PSS CONFIGULARATION

5.3GSETUP.

6.MOBILE CONFIGURATION

7.SYSTEM UPGRADE

8.DATE AND TIME SETTINGS

9.DISPLAY SETTING

10.TOUR SETTINGS

11.RECORD SETTING

12.ADD IP CAMERA

13.ABNORMALITY

14.PLAYBACK AND BACKUP

15.PASSWORD RESET

16.E-MAIL SETUP

DOWNLOAD LINKS:-

SMART PSS - CLICK HERE

G DMSS ANDROID - CLICK HERE

1.LAN CONFIGURATION

Connect the DVR / NVR to Router/switch through a lan

cable.

On your PC >> Start >> Run >> cmd >> ipconfig

According to the default gateway IP, assign your

device an IP in the same range.

Eg: If the default gateway is 192.168.0.1. Then device

IP will be 192.168.0.2 to 255

Dvr default ip Address is 192.168.1.108.

Desktop software is VMS.

Dvr default User Name : admin , Password : admin.

2.MODEM CONFIGURATION

Open the router page in browser as on your default

gateway

(Eg : 192.168.1.1)

Login the router page.

Goto advanced setup >> Disable the Firewall and spi.

(Single Dvr Config) Advanced setup >> Enable the

DMZ >> Enter the Dvr ip address >> ( Eg:

192.168.1.108 ) >> SAVE.

(Multi Dvr Config) Goto Virtual Server >>Enter the

rule, Start port, End port, Ip address >> Save. Do the

same settings for all the Dvr’s tcp ports and http

ports ( change it in Dvr )

NOTE : Change the IP address, TCP port and HTTP

port for all other Dvr.

Enter ping.eu in ie brower

Goto port check enter the router wan ip and port no (

37777 & 80 ) .

Click GO. Now the ports will show open.

Now goto the Dvr ddns page.

3.DDNS AND P2P CONFIGURATION

DDNS CONFIGURATION

Main menu >> Network >> DDNS >> Enable >>

The ddns type is : Quickddns - free >> enter the

Domain Name (Eg: abj123) >> Apply >> Now Internet

Status will show Connected.

P2P CONFIGURATION

FOR P2P no need to configure in modem

Menu >> Network >> Tcp/Ip >> Disable DHCP

Assign local IP to the device

Enable P2P >> now p2p status is Online.

4.VMS CONFIGURATION

Open the VMS >> Devices >> Refresh >> Select the ip

then add >>

After adding, the status will be online.

Now click the device list >> click the camera for live view

in VMS

Devices >> Manual add >> Enter the dvr device name

,register mode (ip/domain) port, user name, password.

Devices >> Manual add >> Enter the dvr device name

,register mode(Domain), user name, password

5. 3G SETUP

Main menu >> Network >> 3g >>

Network type : Auto

Authentification : No auth

Apn : (depend on Network)

Dial No : (depend on Network )

After dial up you will get the dynamic ip address >> then

go to p2p >> status will be online >> then follow the p2p

mobile settings.

6.MOBILE CONFIGURATION

Android : Hifocuslive

Iphone : Imms/Hifocuslive.

Install the Application play store/app store.

7.DDNS CONFIGURATION

Name : Any Name

Register Mode : Ip Domain

Address: (Ex: hifocus123.Quickddns .com)

Port : 37777.

User name : admin

Password : admin

8.P2P CONFIGURATION

Name: Anything

Register Mode : p2p

Address: (Ex:1c02a39papiv6ke)

User name : admin

Password : admin

9. SYSTEM UPGRADE

Main menu >> System >> Rename the original file to

update.bin

Then start update…….

After rebooting the Dvr will be updated successfully.

10.DATE & TIME SETTING

Main menu >> System >> General >> Change the

current date and time save and apply.

11.DISPLAY SETTING

Main menu >> System >> Display >> Select the default

resolution 1024x768 for support all VGA & HDMI

output.

12.TOUR SETTING

Main menu >> System >> Display >> Tour setup >>

Enable the tour and select the tour type and channels

13.RECORD SETTING

Main menu >> Storage >> Schedule >> Enable the regular

and select all channels for continuous recording.

14.MOTION RECORDING

Above image will be showing after enabling motion

detection.

15. ADD IP CAMERA

Main menu >> Advance >> Digital >> Coaxial support

for both analog & hdcvi camera. For ip camera select ip

chennal mode. 4ch CVR supports 2 IP camera’s, 8ch

supports 4 IP camera’s, 16ch supports 4 IP camera’s

16.ABNORMALITY

Main menu >> Event >> Abnormality >> Disable Buzzer

to stop the beep sound if the Dvr is running without

Harddisk or if there is any Hdd error.

17.PLAYBACK & BACKUP

Main menu >> Search >> Select the Date and Channel

No. Search and click the file which you required. Then

the playback of the particular date and time will be

played.

Main menu >> Back up >> Now select the channel then

start date ,time and end date, time now click Add. After

the files are shown below, select the file and click start

back up. now files will be copied to your pen drive.

18. PASSWORD RESET

Main menu >> System >> Account >> User >> Modify

(admin user ) >> Enable the Modify password >> Old

password (enter the 6 digit reset code ) >> New

password ( Enter the new password ) >> Confirm

password (Enter the new password ) >> Save .

19.E-mail Setup

Setup >> Network >> Email >> Enable >> smtp

server for gmail ( smtp.gmail.com ) port [465],username:

( your mail id ), password : ( your email password ),

sender mail : ( your email id ), encrypt type ( ssl ) receiver

mail ( maximum 5 - Any email address ) , save and click

email test.