HCD-F200/F500HCD-F500 AEP Model UK Model HCD-F200 Singapore Model Thai Model HCD-F200/F500 Ver. 1.1...

SERVICE MANUAL

Sony CorporationAudio&Video Business GroupPublished by Sony Techno Create Corporation

HCD-F200/F500

SPECIFICATIONS

DVD RECEIVER9-889-150-022008H05-1© 2008.08

Canadian ModelE Model

Australian ModelRussian Model

HCD-F500

AEP ModelUK Model

HCD-F200

Singapore ModelThai Model

HCD-F200/F500

Ver. 1.1 2008.08

• HCD-F200 is the DVD system, USB, tuner and video section in DAV-F200.

• HCD-F500 is the DVD system, USB, tuner and video section in DAV-F500.

Note:• In this set, repair in the state of having connected with SA-

WSF200.• In this set, repair in the state of having connected with SA-

WSF500.

Model Name Using Similar Mechanism NEWDVD Mechanism Type CDM86-DVBU101Optical Pick-up Block Name KHM-313CAB

Photo: HCD-F500

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

This system incorporates with Dolby* Digital and Dolby Pro Log-ic (II) adaptive matrix surround decoder and the DTS** Digital Surround System.

* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of

Dolby Laboratories.** Manufactured under license under U.S. Patent #’s: 5,451,942;

5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

This system incorporates High-Defi nition Multimedia Interface (HDMITM) technology.HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

“BRAVIA” is a trademark of Sony Corporation.

“S-AIR” and its logo are trademarks of Sony Corporation.

Tuner SectionSystem PLL quartz-locked digital

synthesizerFM tuner sectionTuning rangeCanadian models: 87.5 MHz - 108.0 MHz (100 kHz step)Other models: 87.5 MHz - 108.0 MHz (50 kHz step)Antenna (aerial) FM wire antenna (aerial)Antenna (aerial) terminals 75 ohms, unbalancedIntermediate frequency 10.7 MHz

Video SectionOutputs VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms HDMI OUT: Type A (19 pin)

Inputs (Analog)TV (AUDIO IN) Sensitivity: 450/250 mVInputs (Digital) SAT/CABLE (COAXIAL)Impedance: 75 ohmsOutput (Digital) (HCD-F200) Impedance: 75 ohms

DVD SystemLaser Semiconductor laser (DVD: λ = 650 nm) (CD: λ = 790 nm) Emission duration: continuousSignal format systemCanadian and Latin American models: NTSCOther models: NTSC/PAL

USB SectionSupported bit rateMP3 (MPEG 1 Audio Layer-3): 32 kbps - 320 kbpsWMA: 48 kbps - 192 kbpsAAC: 48 kbps - 320 kbpsSampling frequenciesMP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHzWMA: 44.1 kHzAAC: 44.1 kHz

(USB) port:Maximum current: 500 mA

– Continued on next page –

HCD-F200/F500

2

NOTES ON CHIP COMPONENT REPLACEMENT• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

FLEXIBLE CIRCUIT BOARD REPAIRING• Keep the temperature of soldering iron around 270 °C during

repairing.• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).• Be careful not to apply force on the conductor when soldering

or unsoldering.

SAFETY-RELATED COMPONET WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

Control unit (HCD-F200)Output voltage (DIGITAL MEDIA PORT) DC 5 VOutput current (DIGITAL MEDIA PORT) 700 mADimensions (approx.) 434 mm × 185 mm × 78 mm

(w/h/d) 434 mm × 214 mm × 124 mm

(w/h/d) with standMass (approx.) 3.6 kg 3.7 kg with stand

Control unit (HCD-F500)Output voltage (DIGITAL MEDIA PORT) DC 5 VOutput current (DIGITAL MEDIA PORT) 700 mADimensions (approx.) 434 mm × 185 mm × 78 mm

(w/h/d) 434 mm × 214 mm × 124 mm

(w/h/d) with standMass (approx.) 3.6 kg 3.7 kg with stand

Design and specifi cations are subject to change without notice.

CAUTIONUse of controls or adjustments or performance of procedures other than those specifi ed herein may result in hazardous radia-tion exposure.

Self-diagnosis Function(When letters/numbers appear in the display)

When the self-diagnosis function is activated toprevent the system from malfunctioning, a 5-character service number (e.g., C 13 50) with a combination of a letter and 4 digits appears onthe TV screen or front panel display. In this case, check the following table.

When displaying the version number on the TV screen

When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.

First 3 characters ofthe service number

Cause and/or corrective action

C 13 • The disc is dirty.

Clean the disc with a soft cloth.

• The disc is a format that the system cannot play.

C 31 The disc is not inserted correctly.

Restart the system, then re-insert the disc correctly.

E XX

(XX is a number)

To prevent a malfunction, the system has performed the self-diagnosis function.

Contact your nearest Sonydealer or local authorized Sonyservice facility and give the 5-character service number.

Example: E 61 10

C:13:50

VER.X.XX

This appliance isclassified as a CLASS 1LASER product. Thismarking is located on the bottom exterior.

HCD-F200/F500

3

1. SERVICING NOTES ............................................. 4

2. GENERAL .................................................................. 8

3. DISASSEMBLY3-1. Disassembly Flow ........................................................... 103-2. Panel (Stand Top) ............................................................ 113-3. Cover (Read-HCD), Holder (Terminal-HCD) ................ 113-4. Process In The Solder Bridge ......................................... 123-5. Optical Pick-up Block ..................................................... 133-6. KEY-R/FL/KEY-L/USB Board ....................................... 133-7. Main Block ..................................................................... 143-8. Shield Plate (Front) ......................................................... 153-9. MAIN Board Block ........................................................ 153-10. MAIN Board ................................................................... 163-11. DMB-FIT Board ............................................................. 163-12. DVD Mechanism Block .................................................. 173-13. Motor (Pulley) Assy (Loading) (M001) .......................... 173-14. Holder (BU) Assy ........................................................... 183-15. Lever (BU Lock) ............................................................. 183-16. Close Lever ..................................................................... 193-17. Lever (DIR), Gear (IDL-B) ............................................ 193-18. Chassis (Top) .................................................................. 203-19. Lever (Loading-L/R) ....................................................... 213-20. Lever (Disc Sensor)/(Disc Stop) ..................................... 223-21. Gear (IDL-C) .................................................................. 22

4. TEST MODE ............................................................ 23

5. ELECTRICAL ADJUSTMENT ........................... 28

6. DIAGRAMS6-1. Block Diagram - DVD SERVO Section - ....................... 296-2. Block Diagram - MAIN Section - ................................... 306-3. Block Diagram - HDMI, VIDEO Section - .................... 316-4. Block Diagram - PANEL, POWER SUPPLY Section - ........................... 326-5. Printed Wiring Boards - DMB-FIT Section (1/2) - ......... 346-6. Printed Wiring Boards - DMB-FIT Section (2/2) - ......... 356-7. Schematic Diagram - DMB-FIT Section (1/4) - ............. 366-8. Schematic Diagram - DMB-FIT Section (2/4) - ............. 376-9. Schematic Diagram - DMB-FIT Section (3/4) - ............. 386-10. Schematic Diagram - DMB-FIT Section (4/4) - ............. 396-11. Printed Wiring Board - MAIN Board (Component Side) - ................................ 406-12. Printed Wiring Board - MAIN Board (Conductor Side) - .................................. 416-13. Schematic Diagram - MAIN Board (1/3) - ..................... 426-14. Schematic Diagram - MAIN Board (2/3) - ..................... 436-15. Schematic Diagram - MAIN Board (3/3) - ..................... 446-16. Printed Wiring Board - CENTER Board - ...................... 456-17. Schematic Diagram - CENTER Board - ......................... 456-18. Printed Wiring Board - FL Board - ................................. 466-19. Schematic Diagram - FL Board - .................................... 476-20. Printed Wiring Boards - KEY Section - .......................... 486-21. Schematic Diagram - KEY Section - .............................. 49

TABLE OF CONTENTS

7. EXPLODED VIEWS7-1. Rear Cover Section ......................................................... 587-2. Front Panel Section ......................................................... 597-3. Main Section ................................................................... 607-4. Chassis Section ............................................................... 617-5. DVD Mechanism Deck Section-1 (CDM86-DVBU101) ...................................................... 627-6. DVD Mechanism Deck Section-2 (CDM86-DVBU101) ...................................................... 637-7. DVD Mechanism Deck Section-3 (CDM86-DVBU101) ...................................................... 647-8. DVD Mechanism Deck Section-4 (CDM86-DVBU101) ...................................................... 65

8. ELECTRICAL PARTS LIST .............................. 66

HCD-F200/F500

4

SECTION 1SERVICING NOTES

Model Part No.F200: AEP and UK models 3-294-269-0[]

F200: Singapore model 3-294-270-0[]

F500: Canadian model 3-294-272-0[]

F500: Russian model 3-294-274-0[]

F500: Singapore model 3-294-275-0[]

F500: 240V AC area in E model 3-294-276-0[]

F500: Korean and Thai models 3-294-277-0[]

F500: Australian model 3-294-279-0[]

F500: Latin American model (110 – 240V AC area) 3-294-281-0[]

F500: Mexican model 3-294-282-0[]

F500: Taiwan model 3-294-283-0[]

F200: Thai model 3-452-613-0[]

F500: Iranian model 3-876-712-0[]

F500: Saudi Arabia model 4-114-165-0[]

UNLEADED SOLDERBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40 °C higher

than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to

about 350 °C.Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to fl ow)

than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostat-ic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts.The fl exible board is easily damaged and should be handled with care.

NOTES ON LASER DIODE EMISSION CHECKThe laser beam on this model is concentrated so as to be focused on the disc refl ective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.

RELEASING THE DISC SLOT LOCKThe disc slot lock function for the antitheft of an demonstration disc in the store is equipped.

Releasing Procedure:1. Press the [?/1] button to turn on the system.2. Press the [FUNCTION] button on the remote commander to

select “DVD”.3. Press the [x] and [Z] button on the set simultaneously and hold

down until “UNLOCKED” displayed on the fl uorescent indi-cator tube (around 5 seconds).

Note: When “LOCKED” is displayed, the disc slot lock is not released by turning power on/off with the [?/1] button.

RELEASING THE DEMO PLAY LOCKReleasing Procedure :1. Press the [?/1] button to turn on the system.2. Press the [FUNCTION] button on the remote commander to

select “DVD”.3. Press the [x] and [N] button on the set simultaneously and

hold down until “DEMO OFF” displayed on the fl uorescent indicator tube (around 5 seconds).

Note: When “DEMO PLAY” is displayed, the DEMO play lock is not released by turning power on/off with the [?/1] button.

NOTE OF REPLACING THE IC102 AND IC103 ON THE DMB-FIT BOARDIC102 and IC103 on the DMB-FIT board cannot exchange with single. When IC102 and IC103 on the DMB-FIT board is dam-aged, exchange the entire mounted board.

MODEL IDENTIFICATION– Rear View –

Part No.

BEGIN IT BEFORE THE REPAIR (HCD-F200)When the HCD-F200 is checked, connect to SA-WSF200 (for ac-tive speaker of DAV-F200).Be sure in advance the SA-WSF200 is prepared.

BEGIN IT BEFORE THE REPAIR (HCD-F500)When the HCD-F500 is checked, cannot to SA-WSF500 (for ac-tive speaker of DAV-F500).Be sure in advance the SA-WSF500 is prepared.

Ver. 1.1

HCD-F200/F500

5

Playable Discs

1)MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. MP3 files must be in MPEG1 Audio Layer 3 format.

2)JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).)

Type Disc logo Characteristics Icon

DVD VIDEO • DVD VIDEO

• DVD-R/DVD-RW in DVD VIDEO format or video mode

• DVD+R/DVD+RW in DVD VIDEO format

VR (Video Recording) mode

• DVD-R/DVD-RW in VR (Video Recording) mode (except for DVD-R DL)

VIDEO CD • VIDEO CD (Ver. 1.1 and 2.0 discs)

• Super VCD

• CD-R/CD-RW/CD-ROM in video CD format or Super VCD format

CD • Audio CD

• CD-R/CD-RW in audio CD format

DATA CD – • CD-R/CD-RW/CD-ROM in DATA CD format, containing MP3files1), JPEG image files2), and DivX video files3)4)5), and conforming to ISO 96606) Level 1/Level 2, or Joliet (extended format)

DATA DVD – • DVD-ROM/DVD-R/DVD-RW/DVD+R/DVD+RW in DATA DVD format, containing MP3files1), JPEG image files2), and DivX video files3)4)5), and conforming to UDF (Universal Disk Format)

3)Except for North American models.4) DivX® is a video file compression technology, developed by DivX, Inc. 5) DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.6)A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for

Standardization).

“DVD-RW,” “DVD+RW,” “DVD+R,”“DVD VIDEO,” and the “CD” logos are trademarks.

The system cannot play the following discs:• CD-ROM/CD-R/CD-RW other than those recorded in the formats listed• CD-ROM recorded in PHOTO CD format• Data part of CD-Extra• CD Graphics disc• DVD Audio• DATA DVD that does not contain MP3 files, JPEG image files, or DivX video files** Except for North American models.

• DVD-RAM• Super Audio CD

Also, the system cannot play the following discs:• A DVD VIDEO with a different region code• A disc that has a non-standard shape (e.g., card, heart)• A disc with paper or stickers on it• A disc that has the adhesive of cellophane tape or a sticker still left on it

In some cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW cannot be played on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.The disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions for the recording device.Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA DVDs created in Packet Write format cannot be played.

Music discs encoded with copyright protection technologiesThis product is designed to play back discs that conform to the Compact Disc (CD) standard.Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Example of discs that the system cannot play

Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW

Note on DualDiscsA DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

• This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions can also be played back.

• This system can play a Multi Session CD when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back.

• If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first session, only the first session will be played back.

Your system has a region code printed on the rear of the control unit and will only play a DVD labeled with the same region code.

A DVD VIDEO labeled will also play on this system.If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be given even though playing the DVD VIDEO is prohibited by area restrictions.

Some playback operations on a DVD or VIDEO CD may be intentionally set by software producers. Since this system will play a DVD or VIDEO CD according to the disc contents the software producers designed, some playback features may not be available. Be sure to read the operating instructions supplied with the DVD or VIDEO CD.

About Multi Session CD

Region code

Note about playback operations of a DVD or VIDEO CD

ALL

HCD-F200/F500

6

HOW TO EJECT THE DISC WHEN POWER SWITCH TURNS OFF

Note: Please take out the DVD mechanism block from a set.

PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD

CAUTION

Lift up the FFC holder.

two claws

Be sure to execute a solder bridge as a measure against static electricity when removing the OP block (DVBU101) or DMB-FIT board. (Otherwise, the OP block will be destroyed.)

– DVD MECHANISM BLOCK Bottom view –

Please rotate the pully in the direction of the arrow after removing mechanism deck, and eject the disc.

disc

– DVD MECHANISM BLOCK Bottom view –

HCD-F200/F500

7

MAIN BOARD SERVICE POSITION• In checking the MAIN board, prepare extension jig (Part No. J-2501-243-A: 1.00 mm pitch, 17 cores, length 300 mm). Note: Pleaese connect it afrer taking out MAIN board, DMB-FIT board and DVD mechanism block of the set referring to Section 3 Disassembly (page 10)

Connect extension jig (J-2501-243-A)to the MAIN board (CN103) and FL board (CN806).

FL board

DVD mechanism block

DMB-FIT board

MAIN board

HCD-F200/F500

8

SECTION 2GENERAL

This section is extracted from instruction manual.

Ventilation slots

/ (on/standby) button

AUTO (Decoding mode) indicator

WIDE STAGE indicator

Play operation buttons/Illumination

FUNCTION button

Remote sensor

VOL +/– buttons

(eject) button

Front panel display

Disc slot

Stand cover

Control unit

AUTO WIDE STAGE FUNCTION VOL

Top viewHCD-F200

Right side viewFront view

ANTENNA (FM75 COAXIAL) jack

VIDEO OUT (COMPONENT) jacks

TV (AUDIO IN R/L) jacks

VIDEO OUT (VIDEO) jack

SAT/CABLE (DIGITAL IN COAXIAL) jack

HDMI OUT jack

SAT/CABLE (DIGITAL IN OPTICAL)jack

TV (DIGITAL IN OPTICAL) jack

DIGITAL OUT (COAXIAL) (DVDfunction only) jack

DMPORT jack

(USB) port

Panel cover

AUDIO IN

VIDEOR

L

TV

ANTENNA

PB /C

BP

R /CR

Y

COM

PONENT

VIDEO O

UT

COAXIAL

DIGITAL O

UT

DIGITAL IN

OPTICAL

DIGITAL IN

OPTICAL

DIGITAL IN

COAXIAL

TVSAT/CABLE

DMPO

RTSAT/CABLE

VIDEO O

UTDC5V0.7A M

axO

UT

FM75

COAXIAL

Connector panel

Left side view

ANTENNA (FM75 COAXIAL) jack

VIDEO OUT (COMPONENT) jacks

TV (AUDIO IN R/L) jacks

VIDEO OUT (VIDEO) jack

SAT/CABLE (DIGITAL IN COAXIAL) jack

HDMI OUT jack

SAT/CABLE (DIGITAL IN OPTICAL)jack

TV (DIGITAL IN OPTICAL) jack

DMPORT jack

ECM-AC2 jack

(USB) port

Panel cover

AUDIO IN

VIDEOR

L

TV

FM75

CO

AXIAL

ANTENNA

DIGITAL IN

OPTICAL

DIGITAL IN

OPTIC

ALDIG

ITAL INC

OAXIAL

TVECM

-AC2

SAT/CA BLEDM

PORT

SAT/CABLEVIDEO

OUT

DC5V0.7A

Max

OU

T

PB/C

BP

R/CR

Y

COM

PONENT

VIDEO O

UT

Connector panel

Left side view

Ventilation slots

/ (on/standby) button

A.F.D. STD indicator

D.C.S. indicator

Play operation buttons/Illumination

FUNCTION button

Remote sensor

VOL +/– buttons

(eject) button

Front panel display

Disc slot

Stand cover

A.F.D STD D.C.S. FUNCTION VOL

Front view Right side view

Top viewHCD-F500

HCD-F200/F500

9

Lights up when the sleep timer is set.

Lights up when the sound of the system is muted.

Displays the USB status

Lights up when a station is received. (Radio only)

Lights up when the time information ofa title or chapter appears in the frontpanel display.(DVD only)

Stereo/Monaural effect (Radio only)

Lights up when an NTSC disc isloaded.

Lights up when a CD or a DATA CD is loaded.

Lights up when a disc is loaded.

Current surround format (except for JPEG image file)

Lights up when the night mode is on.

Lights up when the HDMI OUT jack iscorrectly connected to HDCP (Highbandwidth Digital Content Protection) compliant device withHDMI or DVI (Digital Visual Interface) input.

Current repeat mode

Lights up when the system outputs progressive signals (DVD/USB function only).

Displays system’s status such as chapter, title, or track number, timeinformation, radio frequency, playingstatus, decoding mode, etc.


Playing status

Front panel display

SLEEP MUTING TUNED TITLE CHAP STEREO MONO NTSC CD NIGHT

REPEAT 1PROGRESSIVEDIGITALDTS

Flashes when the sleep timer is set.

Lights up when the sound of the system is muted.

Displays the USB status.

Lights up when a station is received. (Radio only)

Lights up when the time information ofa title or chapter appears in the frontpanel display. (DVD only)

Stereo/Monaural effect (Radio only)

Lights up when the color system is set to NTSC. (Asian, Australian, and Middle Eastern models only)Lights up when an NTSC disc isloaded. (CIS models only)

Lights up when a CD or a DATA CD is loaded.

Lights up when the S-AIR transceiver isinserted in the control unit and the system transmits the sound.

Lights up when a disc is loaded.


Lights up when the night mode is on.

Lights up when the HDMI OUT jack iscorrectly connected to HDCP (Highbandwidth Digital Content Protection) compliant device withHDMI or DVI (Digital Visual Interface) input.

Current repeat mode

Lights up when the system outputs progressive signals (DVD/USB function only).

Displays system’s status such as chapter, title, or track number, timeinformation, radio frequency, playingstatus, decoding mode, etc.


Playing status

SLEEP MUTING TUNED TITLE CHAP STEREO MONO NTSC CD S-AIR NIGHT

REPEAT 1PROGRESSIVEDIGITALDTS

HCD-F200

HCD-F500

Remote control

ALPHABETICAL ORDER BUTTON DESCRIPTIONS

A – L M – Z

ANALOG

ANGLE

AUDIO

CLEAR

D.TUNING

DIGITAL

DIMMER

DISPLAY

DVD MENU

DVD TOP MENU

ENTER*

FUNCTION

MENU/HOME

MUTING

NIGHT

ONE-TOUCH PLAY

PICTURE NAVI

PRESET +/–

PROG +/–

REPEAT

SLEEP

SOUND MODE +/–

SUBTITLE

SYSTEM MENU

THEATER/THEATRE

TONE

TOOLS/OPTIONS

TUNING +/–

TV

TV VOL +/–

VOLUME +/–

Number buttons

/ (on/standby)

TV / (on/standby)

/ / / /

REPLAY/ADVANCE

/

/

/

(play)

(stop)

(pause)

DISPLAY**

RETURN

(eject)

-/--

/

/

/

* The ENTER button has thesame function as the button. When you operatethe TV, the ENTER button is used for selecting a channel, and the buttonis used for selecting menu items.

** This button is available for the “DVD” or “DMPORT” function. Depending on the DIGITAL MEDIA PORT adapter, this button may notwork.

ALPHABETICAL ORDER BUTTON DESCRIPTIONS

A – L M – Z

ANALOG

ANGLE

AUDIO

CC

CLEAR

D.TUNING

DIGITAL

DIMMER

DISPLAY

DVD MENU

DVD TOP MENU

ENTER*

FAVORITES

FUNCTION

GUIDE

INPUT

MENU/HOME

MUTING

NIGHT

ONE-TOUCH PLAY

PICTURE NAVI

PRESET +/–

PROG +/–

REPEAT

SLEEP

SOUND MODE +/–

SUBTITLE

SYSTEM MENU

THEATER/THEATRE

TONE

TOOLS/OPTIONS

TUNING +/–

TV

TV CH +/–

TV VOL +/–

VOLUME +/–

Number buttons

/ (on/standby)

TV / (on/standby)

/ / / /

REPLAY/ADVANCE

/

/

/

(play)

(stop)

(pause)

DISPLAY**

RETURN

(eject)

-/--

/

/

/

* The ENTER button has thesame function as the button. When you operatethe TV, the ENTER button is used for selecting a channel, and the buttonis used for selecting menu items.

** This button is available for the “DVD” or “DMPORT” function. Depending on the DIGITAL MEDIA PORT adapter, this button may notwork.

HCD-F200

HCD-F500

HCD-F200/F500

10

SECTION 3DISASSEMBLY

• This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

3-2. PANEL (STAND TOP) (Page 11)

3-3. COVER (READ-HCD), HOLDER (TERMINAL-HCD) (Page 11)

3-7. MAIN BLOCK (Page 14)

3-8. SHIELD PLATE (FRONT) (Page 15)

3-9. MAIN BOARD BLOCK (Page 15)

3-10. MAIN BOARD (Page 16)

3-4. PROCESS IN THE SOLDER BRIDGE (Page 12)

3-11. DMB-FIT BOARD (Page 16)

3-6. KEY-R/FL/KEY-L/USB BOARD (Page 13)


3-12. DVD MECHANISM BLOCK (Page 17)

3-18. CHASSIS (TOP) (Page 20)

3-19. LEVER (LOADING-L/G) (Page 21)

3-20. LEVER (DISC SENSOR)/ (DISC TOP) (Page 22)

3-21. GEAR (IDL-C) (Page 22)


3-5. OPTICAL PICK-UP BLOCK (Page 13)

3-13. MOTOR (PULLEY) ASSY (LOADING) (M001) (Page 17)

3-14. HOLDER (BU) ASSY (Page 18)

3-15. LEVER (BU LOCK) (Page 18)

3-16. CLOSE LEVER (Page 19)

3-17. LEVER (DIR), GEAR (IDL-B) (Page 19)

SET

HCD-F200/F500

11

Note: Follow the disassembly procedure in the numerical order given.

3-2. PANEL (STAND TOP)

3-3. COVER (READ-HCD), HOLDER (TERMINAL-HCD)

three screws (B4 × 8)

five screws (KTP2.6 × 5)

panel (stand-top)

stand bottom block

sheet

– rear view –

Note: Please spread a seat under a set not to injure front panel assy.

two screws (BVTT3 × 8)


four claws

cover (terminal-HCD)

cover (SYS) four sheet (hole)

label (connection)

beads wire band

cover (read-HCD)

holder (terminal-HCD)

two cushions terminal

two screws (BVTP3 × 6)

sheet


– rear view –

HCD-F200/F500

12

3-4. PROCESS IN THE SOLDER BRIDGE

Note: The process in the solder bridge is necessary before optical pick-up or DMB-FIT board is removed. When this process is neglected, optical pick-up is damaged.

eight screws (BVTP3 × 6)

cover (chassis)

cushion (foot)

CAUTION

Lift up the FFC holder.

flexible flat cable two claws

Be sure to execute a solder bridge as a measure against static electricity when removing the optical pick-up or DMB-FIT board. (Otherwise, the OP block will be destroyed.)

sheetNote: Please spread a seat under a set not to injure front panel assy.

– rear view –

HCD-F200/F500

13

four insulator screws insulator

insulator

insulator

insulator

connector

optical pick-up block

Note: A screw hole of this screw tends to be damaged, so please be careful about the installation time and the time of removal.

sheet


– rear view –

3-5. OPTICAL PICK-UP BLOCK

3-6. KEY-R/FL/KEY-L/USB BOARD

Note: These boards can be in any order removed.

screw (BVTP2.6)

harness (FL board: CN808/KEY-R board: CN881)

ground plate (PWB)

ground plate (PWB)

FL board

USB board

wire (flat type) (7 core) (KEY-L board: CN871/FL board: CN807)

wire (flat type) (17 core) (CN806)

ground plate (PWB)

KEY-R board

two screws (BVTP2.6)

unweaved cloth


ground plate (USB)

gasket (USB)

screw (BVTP2.6)

screw (BVTP2.6)

five screws (BVTP2.6)

sheetNote: Please spread a seat under a set not to injure front panel assy.

– rear view –

three screws (BVTP2.6)

KEY-L board

ground plate (USB-2)

HCD-F200/F500

14

3-7. MAIN BLOCK


screw (BVTP3 × 6)

screw (BVTP3 × 6)


screw (BVTP3 × 8)

wire (flat type) (17 core) (CN851)

three claws

main block

ground plate (bridge)


bracket shield-F (HCD)

– rear view –

– rear view –

tape (rong BU)

connector (CN502)

two claws two claws

HCD-F200/F500

15

3-8. SHIELD PLATE (FRONT)

3-9. MAIN BOARD BLOCK

five screws (BVTP3 × 6)


six screws (BVTP3 × 6)

three screws (BVTP3 × 6)

shield plate (front)

six screws (BVTP3 × 6)

MAIN board block

screw (BVTT3 × 8)

three screws (BVTP3 × 6)

clamp

connector (CN708)

system cable connector (CN107)

connector (CN105)

wire (flat type) (CN103)

system cable connector (CN702)


HCD-F200/F500

16

3-10. MAIN BOARD

3-11. DMB-FIT BOARD



tuner (FM)

shield plate (left)

wire (flat type) (MAIN board: CN101 (F200: AEP, UK/F500: RU)/ CN102 (F200: SP, TH/F500: CND, E3, E15, E32, EA, MX, SP, TW, KR, TH, AUS), tuner (FM))

MAIN board

eight screws (BVTP3 × 6)

harness (CN1101)

harness (CN602)



wire (flat type)(CN202)


DMB-FIT board

connector (CN201)

Note: Be sure to execute a solder bridge as a measure against static electricity when removing the flexible flat cable (24 core). (Otherwise, the OP block will be destroyed.) (Refer to 3-4. Process in the Solder Bridge)

Ver. 1.1

• Abbreviation AUS : Australian model CND : Canadian model E3 : 240V AC area in E model E15 : Iranian model E32 : Latin American model (110 – 240V AC area) EA : Saudi Arabia model KR : Korean model MX : Mexican model RU : Russian model SP : Singapore model TH : Thai model TW : Taiwan model

HCD-F200/F500

17

3-12. DVD MECHANISM BLOCK

3-13. MOTOR (PULLY) ASSY (LOADING) (M001)

screw (BVTP3 × 8)


DVD mechanism block

wire (flat type)

Remove two solders.

two screws (B 2.6 × 8)

MS-214 board

motor (pully) assy (loading) (M001)

belt (MOT)

HCD-F200/F500

18

3-14. HOLDER (BU) ASSY

3-15. LEVER (BU LOCK)

screw (B 2.6 × 8)

lever (CL UP2)

holder (BU) assy

floating screw (PTPWH M2.6)

floating screw (PTPWH M2.6)

LHL support

two screws (B 2 × 6)

three hooks lever (BU lock)

gear (BU lock)

gear (cap)

HCD-F200/F500

19

3-16. CLOSE LEVER

3-17. LEVER (DIR), GEAR (IDL-B)

washer (3-1-0.4)

SPR-E lever close

shaft disc stop

close lever

claw

pulley (gear)

nylon washer 1.7

claw

washer

Lever (DIR)

gear (IDL-A)

gear (IDL-B) tension coil spring (DIR)

stoper

Loosen the screw.

Hold the release lever and change the direction.

gear (cap)

HCD-F200/F500

20

3-18. CHASSIS (TOP)

screw (B 2.6 × 8)

three screws (B 2.6 × 8)

two screws (B 2 × 10)

chassis (top)

lever (CL UP2)

HCD-F200/F500

21

3-19. LEVER (LOADING-L/R)

two hooks

two hooks

BOTTOM VIEW

lever (loading-L)

lever (loading-R)

SPT-T (loading-R) SPR-T (loading-L)

PRECAUTION DURING LEVER (LOADING R/L) INSTALLATION

lever (loading-R)

Align the horizontal position.

lever (loading-L)

Install the both levers so that they move symmetrically.

HCD-F200/F500

22

3-20. LEVER (DISC SENSOR)/(DISC STOP)

3-21. GEAR (IDL-C)

chassis (top)

hole

Install the lever (disc stop) so that the both holes are aligned.

hole

gear (cap)

two claws

two hooks

lever (disc stop) lever (disc stop)

lever (disc sensor)

PRECAUTION DURING DISC STOP LEVER INSTALLATION

gear (IDL L)

three hooks two claws

claw

gear (IDL-F)

gear (IDL-C)

gear (IDL-D)

lever (gear loading) assy

HCD-F200/F500

23

1. TEST MODES OTHER THAN THE TEST MENUThese are executable test mode even if not entering the test menu.

1-1. Cold ResetThe cold reset clears data except DVD data stored in the RAM to initial conditions. Execute this mode when returning the set to the customers.Procedure:1. In the standby state, the [?/1] button on the set is pressed for 5

seconds or more.2. The messages “MEMORY CLR” and “PUSH POWER” are

displayed on the fl uorescent indicator tube.3. When the [?/1] button is pressed in the state of step 2, the

messages “CLEARING” → “CLEARED!” are displayed, then becomes standby states.

1-2. DVD Version ViewProcedure:1. Connect the set with the TV screen.2. In the standby state, press the button in order of the [

DISPLAY] → [ENTER] → [?/1] on the remote commander, the DVD version appears on the TV screen.

3. To release from this mode, press the [?/1] button.

1-3. Color System Change (Except Canadian, AEP, UK and Russian models)

This mode let you change the color system of the video output from PAL to NTSC or vice versa.Procedure:1. Connect the set with the TV screen.2. In the standby state, press the [?/1] and [VOL –] button on the

set simultaneously.3. The messages “PAL” or “NTSC” are displayed on the fl uores-

cent indicator tube when the color system is set to “PAL” or “NTSC”.

1-4. Disc Slot LockThis mode let you lock the disc slot. When this mode is activated, the disc will not eject when the [Z] button is pressed. The message “LOCKED” will be displayed on the fl uorescent indicator tube.Procedure:1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button on the remote commander to

select the “DVD”.3. Press the [x] and [Z] button on the set simultaneously and hold

down until “LOCKED” or “UNLOCKED” displayed on the fl uorescent indicator tube (around 5 seconds).

1-5. Demo Disc PlayMode to prevent theft of the demonstration disc.Setting Procedure:It automatically enters the mode when the demonstration disc is inserted.Releasing Procedure:1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button on the remote commander to

select the “DVD”.3. Press the [x] and [N] button on the set simultaneously and

hold down until “DEMO OFF” displayed on the fl uorescent indicator tube (around 5 seconds).

1-6. S-AIR ID Select (F500 only)When shifting to the ID selection mode of S-AIR, this mode is used. Procedure:1. Connect EZW-RT10 (P/N: A-1368-101-A) (Canadian model),

(P/N: A-1512-377-A) (Australian model) and (P/N: A-1512-377-A) (240V AC area E, Iranian, Singapore and Russian models) with the EZW-RT10 connector (CN701) on the AMP-DSP board from SA-WSF500.

2. Press the [?/1] button to turn the power on.3. Press the [N], [FUNCTION] and [VOL –] button on the set

simultaneously.4. The message “S-AIR ID X” displayed on the fl uorescent indi-

cator tube.(X is A or B or C)

1-7. S-AIR PEARINGNot used for the servicing.

SECTION 4TEST MODE

HCD-F200/F500

24

2. TEST MODES IN THE TEST MENUThese are the test modes done in the test menu.Setting method of the test menu:1. Press the [?/1] button to turn the power on.2. Press the button in order of the [CLEAR] → [ENTER] → [0]

→ [1] → [0] → [ANGLE] on the remote commander. (Make the interval when each button is pressed within two seconds.)

3. The message “TEST MENU” appears on the fl uorescent indi-cator tube and enter the test menu.

2-1. Panel TestProcedure:1. Enter the test menu.2. Press the [M] [m] button on the remote commander to select the

“PANEL TEST”, and press the [ENTER] button on the remote commander.

3. All segments and all LEDs turn on. And half segment and ex-cept front panel illmination LEDs turn on. then other half seg-ment front panel illmination LEDs turn on.

4. When all segments in fl uorescent indicator tube are lighted up in the state of step 3, press the [VOLUME +] button on the remote commander and model information is displayed on the fl uorescent indicator tube.

Each time the [VOLUME +] button on the remote commander is pressed, the display changes from destination information, MC version, SUB version in this order, and returns to the mod-el information display.

Each time the [VOLUME –] button on the remote commander is pressed, the version and date are switched.

5. In the state of step 3, press the [FUNCTION] button on the remote commander and “K 0” is displayed on the fl uorescent indicator tube.

“K 0” value increases whenever a button on the set is pressed. However, once a button has been pressed, it is no longer taken into account.

All buttons on the set are pressed, “OK” and “K 10” are alter-nately displayed on the fl uorescent indicator tube.


2-2. AMP TestProcedure:1. Enter the test menu.2. Press the [M] [m] button on the remote commander to select the

“AMP TEST”, and press the [ENTER] button on the remote commander.

3. The message “MEASURE” appears on the fl uorescent indica-tor tube and enter the AMP test mode.

4. Press the [SUBTITLE] button on the remote commander, the message “VACS ON” or “VACS OFF” appears on the fl uores-cent indicator tube and thus the VACS on/off are changed.


2-3. Cold ResetThe cold reset clears data except DVD data stored in the RAM to initial conditions. Execute this mode when returning the set to the customers.Procedure:1. Enter the test menu.2. Press the [M] [m] button on the remote commander to select the

“COLD RESET”, and press the [ENTER] button on the remote commander.

3. The message “COLD RESET.” appears on the fl uorescent in-dicator tube, then becomes standby states.

2-4. Product OutProcedure:1. Enter the test menu.2. Press the [M] [m] button on the remote commander to select

the “PRODUCTOUT”, and press the [ENTER] button on the remote commander.

3. After the “STANDBY” blinking display fi nishes, the message “MECHA LOCK” ↔ “UNPLUG” appears on the fl uorescent indicator tube and the ship mode is set.

4. To release from this mode, pull out the power code.

2-5. DVD ServiceThis mode describes details in “3. DVD SERVICE MODE” (page 25).

2-6. Tuner Factory PresetNot used for the servicing.Press the [?/1] button if having entered this mode.

2-7. Digital Media Port Test Procedure:1. Connect the DMPORT check jig (P/N: J-2501-309-A) with the

DMPORT jack (CN3802) on the DMB-FIT board.2. Press the [?/1] button to turn the power on.3. Confi rm that both LEDs of the DMPORT check jig lights.

(Confi rmation the power supply line)4. Press the [FUNCTION] button on the remote commander to

select the “DMPORT”.5. Enter the test menu.6. Press the [M] [m] button on the remote commander to select

the “DMPORT CHK”, and press the [ENTER] button on the remote commander.

7. The message “DMPORT OK.” appears on the fl uorescent indi-cator tube and enter the digital media port test mode. (Confi r-mation of communication line)

When “NO DETECT.” and “UART .TO” are displayed on the fl uorescent indicator tube, confi rm the connection of the DMPORT check jig, and enter the mode again.

Each time the [>] button on the remote commander is pressed, the connect check and adaptor version check are switched.

Press the [.] button on the remote commander, connected confi rmation of the DMPORT check jig is done again.

8. To a pinjack of the DMPORT check jig input information rele-vant to audio signal (sine-wave 1.0V rms) and composite video signal (white 100% 1.0Vp-p, color bar, etc.).

9. Confi rm the output of speakers and monitor TV. (Confi rmation of analog signal)


colorpattern

generator

DMPORTcheck jig(Part No.:

J-2501-309-A)

J001

AFoscillator

set(HCD-F200/

F500)

SA-WSF200/WSF500

TVmonitor

FL/FRspeaker

DMB-FIT boardCN3802

SPEAKER boardTB101 (SA-WSF500)TB102 (SA-WSF200)

MAIN boardJ906

HCD-F200/F500

25

2-8. VACS DisplayNot used for the servicing.Press the [?/1] button if having entered this mode.

2-9. VACS On/offNot used for the servicing.Press the [?/1] button if having entered this mode.

2-10. DSP Halt ModeNot used for the servicing.Press the [?/1] button if having entered this mode.

2-11. DSP Status DisplayNot used for the servicing.Press the [?/1] button if having entered this mode.

2-12. A.CAL Test DispNot used for the servicing.Press the [?/1] button if having entered this mode.

2-13. Demo Disc PlayMode to prevent theft of the demonstration disc.Setting Procedure:It automatically enters the mode when the demonstration disc is inserted.Releasing Procedure:1. Enter the test menu.2. Press the [M] [m] button on the remote commander to select the

“DEMO PLAY”, and press the [ENTER] button on the remote commander.

3. “DEMO OFF” displayed on the fl uorescent indicator tube.

2-14. DVD DebugNot used for the servicing.Press the [?/1] button if having entered this mode.

2-15. Sircs DisableNot used for the servicing.Press the [?/1] button if having entered this mode.

2-16. DMPORT Device TestNot used for the servicing.Press the [?/1] button if having entered this mode.

2-17. S-AIR ID Select (F500 only)When shifting to the ID selection mode of S-AIR, this mode is used. Procedure:1. Connect EZW-RT10 (P/N: A-1368-101-A) (Canadian model),

(P/N: A-1512-377-A) (Australian model) and (P/N: A-1512-377-A) (240V AC area E, Iranian, Singapore and Russian models) with the EZW-RT10 connector (CN701) on the AMP-DSP board from SA-WSF500.

2. Enter the test menu.3. Press the [M] [m] button on the remote commander to select

the “S-AIR ID”, and press the [ENTER] button on the remote commander.

2-18. S-AIR pearingNot used for the servicing.Press the [?/1] button if having entered this mode.

3. DVD SERVICE MODE3-1. DVD Service Mode General DescriptionThis mode let you make diagnosis and adjustment easily by using the remote commander and the TV screen. The instructions, diag-nostic results, etc. are given on the on-screen display.Be sure to execute the IOP measurement when a base unit is re-placed.

3-2. Enterring DVD Service ModeProcedure:1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button on the remote commander to

select the “DVD”.3. Press the button in order of the [CLEAR] → [ENTER] → [0]

→ [1] → [0] → [ANGLE] → [0] → [6] on the remote com-mander. (Make the interval when each button is pressed within two seconds.)

4. The message “SERVICE IN” appears on the fl uorescent in-dicator tube and top menu of the Remocon Diagnosis Menu appears on the on-screen display on the TV screen as follows. The model name, IF-con version and Syscon version are dis-played at the bottom of the on-screen display.

Remocon Diagnosis Menu

0. External Chip Check1. Servo Parameter Check2. Drive Manual Operation3. Emergency History4. Version Information

Model Name :xxxx_xxIF-con:Ver.xx.xx(xxxx)Syscon:Ver.x.xxx

5. To execute each function, press its number by using numeric button on the remote commander.


3-3. Executing IOP MeasurementIn order to execute IOP measurement, the following standard pro-cedures must be followed.Procedure:1. From the top menu of Remocon Diagnosis Menu, select “2

Drive Manual Operation” by pressing the [2] button on the remote commander. The following screen appears on the on-screen display

Drive Manual Operation

1. Servo Control2. Track/Layer Jump3. Manual Adjustment4. Tray Aging mode5. MIRR time Adjust0. Return to Top Menu

HCD-F200/F500

26

2. Select “3. Manual Adjustment” by pressing the [3] button on the remote commander. The following screen appears on the on-screen display.

Manual Adjust1. Track Balance Adjust:2. Track Gain Adjust:3. Focus Balance Adjust:4. Focus Gain Adjust:5. Eq Boost Adjust:6. Iop:7. TRV. Level:8. S curve(FE) Level:9. RFL(PI) Level:0. MIRR Time:[V][v] Change Value[RETURN]Return to previous menu

3. Select “6. Iop:” by pressing [6] button on the remote com-mander.

4. Wait until a hexadecimal number appear in the on-screen dis-play as below.

Manual Adjust1. Track Balance Adjust:2. Track Gain Adjust:3. Focus Balance Adjust:4. Focus Gain Adjust:5. Eq Boost Adjust:6. Iop: xx7. TRV. Level:8. S curve(FE) Level:9. RFL(PI) Level:0. MIRR Time:[V][v] Change Value[RETURN]Return to previous menu

5. Convert data from hexadecimal to decimal by using conver-sion table.

6. If the value is smaller than 93 (decimal), then it is OK. How-ever if the value is higher than 93, then BU (base unit) is defec-tive and need to be change.

7. Press the [O RETURN] button on the remote commander to return to previous menu.

8. Press the [0] button on the remote commander to return to the top menu of Remocon Diagnosis Menu.

9. Press the [?/1] button to turn off the system.

3-4. Checking Emergency HistoryTo check the emergency history, please follow the following pro-cedure.Procedure:1. From the top menu of Remocon Diagnosis Menu, select “3.

Emergency History” by pressing the [3] button on the remote commander. The following screen appears on the on-screen display.

Emg. History CheckLaser Hours CD 999h 59min DVD 999h 59min

01. 01 05 04 04 00 92 46 00 00 00 00 00 00 00 23 45

02. 02 02 01 01 00 A9 4B 00 00 00 00 00 00 00 23 45

[Next]Next page [Prev]Prev page[0]Return to Top Menu

2. You can check the total time when the laser is turned on during playback of DVD and CD from the above menu. The maxi-mum time, which can be displayed are 999h 59min.

3. You can check the error code of latest 10 emergency history from the above menu. To view the previous or next page of emergency history, press the [.] or [>] button on the re-mote commander. The error code consists of three kinds of error codes.

A. Error code

Example of Error code

01. 01 05 04 04 00 92 46 00 00 00 00 00 00 00 23 45

The meaning of error code is as below:01: Communication error (No reply from syscon)02: Syscon hung up03: Power OFF request when syscon hung up19: Thermal shutdown24: MoveSledHome error25: Mechanical move error (5 changer)26: Mechanical move stack error30: DC motor adjustment error31: DPD offset adjustment error32: TE balance adjustment error33. TE sensor adjustment error34. TE loop gain adjustment error35. FE loop gain adjustment error36. Bad jitter after adjustment40. Focus NG42. Focus layer jump NG51: Spindle stop error52. Open kick spindle error60: Focus on error61: Seek fail error62: Read Q data/ID error70: Lead in data read fail71: TOC read time out (CD)80: Can’t buffering81: Unknown media type

HCD-F200/F500

27

B. Parameter of error codeThis is the detail of error code.


01. 01 05 04 04 00 92 46 00 00 00 00 00 00 00 23 45

C. Time of error codeThis is the laser time when an error occurred.


01. 01 05 04 04 00 92 46 00 00 00 00 00 00 00 23 45

To Clear the Laser HourPress the [ DISPLAY] button on the remote commander and then press the [CLEAR] button on the remote commander. The data for both CD and DVD data are reset.


01. 01 05 04 04 00 92 46 00 00 00 00 00 00 00 23 45

02. 02 02 01 01 00 A9 4B 00 00 00 00 00 00 00 23 45


To Clear the Emergency HistoryPress the [DVD TOP MENU] button on the remote commander and then press the [CLEAR] button on the remote commander. The error code for all emergency history would be reset.


01. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


To Execute the Initialize Setup DataProcedure:1. Press the [DVD MENU] button on the remote commander and

then press the [CLEAR] button on the remote commander. The following screen appears on the on-screen display.


Initialize setup data...


2. The screen after a while returns to former display.

To Return to the Top Menu of Remocon Diagnosis MenuPress the [0] button on the remote commander.

3-5. Checking Version InformationTo check the version information, please follow the following pro-cedure.Procedure:1. From the top menu of Remocon Diagnosis Menu, select “4.

Version Information” by pressing the [4] button on the remote commander. The following screen appears on the on-screen display.

Version information

Firm(Main): Ver. X.XXXXFirm(Sub): XX.XXRISC: XXXXXX8032: XXXXXXAudio DSP: XX.XX.XX.XXServo DSP: XX.XX.XX.XX

[0]Return to Top Menu

2. To return to the top menu of Remocon Diagnosis Menu, press the [0] on the remote commander.

HCD-F200/F500

28

SECTION 5ELECTRICAL ADJUSTMENTS

When the base unit is replaced, perform the adjustment and the measurement as shown below in this order.

EXECUTING IOP MEASUREMENT (See page 25)

TUNER SECTIONFM TUNE LEVEL CHECK

signalgenerator

set

Procedure:1. Turn on the set.2. Input the following signal from signal generator to FM antenna

input directly.

Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHzDeviation : 75 kHzModulation : 1 kHzANT input : 35 dBu (EMF)

Note: Use 75 ohm coaxial cable to connect signal generator and the set. You cannot use video cable for checking.

Use signal generator whose output impedance is 75 ohm.

3. Set to FM tuner function and tune A, B and C signals.4. Confi rm “TUNED” is lit on the display for A, B and C sig-

nals.

When the selected station signal is received in good condition, “TUNED” is displayed.

DVD SECTION

HCD-F200/F500

HCD-F200/F500

2929

SECTION 6DIAGRAMS

6-1. BLOCK DIAGRAM - DVD SERVO Section -

RF

OPTICAL PICK-UPBLOCK

(KHM-313CAB)

Q102-1

AUTO POWERCONTROL (FOR CD)

DVDRFIP10

SPDIF SPDIF

DVDAVOA/AVOB/BVOC/CVOD/D

VOF/F+HVOE/E+G

VC

LIMIT

PD

LD (780)

6DVDB7DVDC8DVDD9

TNI17TPI18

NA11NB12MC13MD14

V2O

LIMIT SW

28

LDO122

MDI119MDI2

53

20

Q102-2

AUTO POWERCONTROL (FOR DVD)

IC201

FOCUS/TRACKING COIL DRIVE,SPINDLE SLED, LOADING MOTOR DRIVE

VREF

IN+3

IN4+

MUTE123MUTE4TSD_M

PS

IC101 (1/2)

RF AMP, SERVO DSP,MPEG DECODER

IC101 (1/4)SYSTEM CONTROLLER

BUFFER

VR (650)

VR (780)

MSWQ103

VCC

LD (650) LDO2

MSW

21

TROPENPWM38DVD_SCO37

DVD_SOD36DVD_SID35DVD XIFCS72

CDM_OPEN70

DVD_XIFBUSY

(CHUCKING)S002

(DISC IN/OUT)S001

73

98

FMO37

FOO41

DMO36

TRO40

V REFO29RFRAPC

FWD94REV95IOPMON39

OP_INP35MUTE123MUTETSD_M

42

25

212220194576

1740

16131210943

148

43

15

24

41

54

REG01REG02

FCS+FCS-

TRK+TRK-

SP-SP+

SL-SL+

BUFFER4647

MCS

BUFFER32313029

SPINDLE MOTORDRIVE

2728

SLED MOTORDRIVE

FOCUS COILDRIVE

3637

TRACKING COILDRIVE

3534

(LOADING)M001 MM

130158157

252

215

IFCK

99xIFCS

97IFSDO

OCSW 104

xIFBSY 110

CKSW 103

IFSDI 100

• SIGNAL PATH: CD PLAY

: AUDIO

: DVD PLAY

A

Q101-2

DVD ONSWITCH

Q101-2

DVD ONSWITCH

(Page 30)

HCD-F200/F500

HCD-F200/F500

3030

6-2. BLOCK DIAGRAM - MAIN Section -

R-CH

R-CH


J906(1/2)

CN3802

TUNER (FM)

DMPORT

(F500)

A+9V

(F200)(F500)

VIDEO

DMVIDEO

L+(Lch)R+(Rch)

DET

RXD

TXD

LOUTROUT

TUNEDDI

DOCLK

CE

RDS_DATARDS_CLK

13

14

5

6

7

17

L

R

B

R-CH

RDS_CLK75

FM 75ΩCOAXIAL

ANTENNA

RDS_DAT81

ST_CE80ST_CLK78ST_DO79ST_DI77TUNED76

DMPORT_TX_OUT31

12

100

97

1

2

38

92

CODEC_PDNCODEC_DOCODEC_CLKCODEC_CSCODEC_DICODEC_INT

MIC_SW

DMPORT_RX_IN32

DMPORT_DET27

R-ch is omitted due to same as L-ch.

(F200: AEP, UK/F500: Russian)

SPDIFA

• SIGNAL PATH

: AUDIO

: VIDEO

: TUNER (FM)

: MIC

RX02

PDN 25CDTI 26

CDTO

27CCLK28CSN9

INT 7

10

DOUT_MUTE21

5711618

21

22X201

12.288kHzXTI

4 RX1

RX3

XTO

15

13X101

10MHzXIN

XOUT

J907J903 (1/2)

SAT/CABLEDIGITAL INCOAXICAL

TVAUDIO IN

DIGITAL OUTCOAXICAL

6

IC281

AYB

RX2

MUTING

SAT/CABLEDIGITAL INOPTICAL

TVDIGITAL INOPTICAL

57 LIN4

51 LIN1

(F200)

J903 (2/2)

IC941

OPTICALRECEIVER

IC901

OPTICALRECEIVER

BUFFERQ271

53

55

5

TX 23

2 4

1

J904ECM-AC2

MIC CONTROLQ901

CN107

SYS_RXD

SYS_TXD

SYS_BUSY

SYS_WAKEUP4

5

7

6

8

1

10

9CABLE_DETECT

TOSA-WSF200/WSF500

SPDIF(DVD)

IC273

LEVELSHIFT

SYS_WAKEUP

SYS_CLK

SYS_RXD

SYS_TXD

SYS_BUSY

RESET RESET

D301

SYS_CLK

3EVER+4VE+3.3V

LIN3

56 RIN3

LIN2

IC201

A/D CONVERTER,D/A CONVERTER

IC902MIC AMP

IC3801LINE AMP

(Page 29)

(Page 31)

HCD-F200/F500

HCD-F200/F500

3131

6-3. BLOCK DIAGRAM - HDMI, VIDEO Section -

DMVIDEO

23VIDEO_MUTE0MTK_RST28VIDEO_MUTE1

25

322

CSC_RX_INCEC_TX_OUT

V_SEL

43P_CONT_HDMI

(F500) (F500)

(F200)

(F200)

191Y189C

185Y/G183B/Cb/Pb182R/Cr/Pr

180TX2P179TX2N177TX1P176TX1N174TX0P173TX0N171TCKP170TCKN

162HTPLG

19

24

21

30

17

23

20

29VOUTAVOUTB

CYOUTA

CBOUTA

CROUTACBOUTB

CROUTB

CYOUTB

IC251VIDEO AMP 95Ω DRIVER

CN906 (2/2)

VIDEO OUTVIDEO

CN1701

11

48

CYIN

YINCIN

CVBS IN

13 CbIN15 CrIN

6

514

MUTE1MUTE2YC MIX

1 TMDS DATA2+3 TMDS DATA2–4 TMDS DATA1+6 TMDS DATA1–7 TMDS DATA0+9 TMDS DATA0–

10 TMDS CLOCK+12 TMDS CLOCK–

19 HPD

Y

PB/CB COMPONENTVIDEO OUT

PR/CR

HDMI OUT

SW+9V

SW+3.3V

IC103EEPROM

IC705

HDMI POWERCONTROL

IC3001

HDMI POWERCONTROL

IC102FLASH ROM

IC101 (2/2)REAMP, SERVO DSP, MPEG DECODER


IC104SD-RAM

IC707+5V REGULATOR

WE EEWPSCLSDA

18 +5V POWER

13 CEC

15 SCL16 SDA

Q9724, 9726, 9728, 9729CEC DATA SWITCH

7101112

102

xSYSRST108

DDC_CLK 161DDC_DAC 159

CLKE 37UDQM 39LDQM 15

WE 11OE 28CE 26

45

12

CAS 17RAS 18WE 16CS 19

CLK 38BA1 21BA0 20

CKE147DQM1132DQM0111_CAS134_RAS135_RWE133_RCS136DRCLK146BA1138BA0137

XWR66XRD78XROMCS76

SCL 6SDA 5

Q701LEVEL SHIFT

140,

141,

143,

144

23 –

26,

29 –

34, 2

2, 35

121-

119,1

17-11

3,12

9-12

215

5, 15

0, 13

9, 14

9

2,4,5

,7,8,1

0,11,1

3,42,

44,45

,47,48

,50,51

,53

RD0 – RD15

RA0 – RA11

DQ0 – DQ15

A0 – A9,A10/AP, A11

97, 5

6 – 62

, 74 –

67,

91, 6

3, 64

, 75,

87

29, 3

1, 33

, 35,

38, 4

0, 42

, 44

45, 2

5 – 18

, 8 –

1,17

, 16,

9, 10

79, 8

0, 82

– 86

, 89

HD0 – HD7

HA0–HA21

DQ0 – DQ7

A0 – A19,NC

DQ15/A-1

RESET

Q105B+ SWITCH

B

166AVDD3165AVDD3

• SIGNAL PATH: AUDIO: VIDEO: USB

71

7

CN501(USB)

USB+5V123

VBUSD–D+

VBUS_OC

USB_DM

197

45USB_DP 44

SW+5VIC708+3.3V REGULATOR

IC709VBUS CONTROL

(Page 30)

HCD-F200/F500

HCD-F200/F500

3232

6-4. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section -

95 KEY2

68 FL_D_OUT

40

D821, 823, 825FRONT PANEL

BUTTON ILLUMINATION

AD1,AD2,S1-35 DAT

CLKXCS

ND801FLUORESCENT

INDICATORTUBE

FLUORESCENTINDICATOR

TUBE DRIVER

T801DC/DC

Q801OSC

CONVERTER

D801 – 804RECT

67 FL_CLK69

S881-883

IC101 (4/4)SYSTEM CONTROLLERIC802

94 KEY1

S831-834

4 SIRCS_IN

93 KEY0

IC706+5V REGULATOR.

S821, 822

D102

74 KEY INT

WIDE STAGE

D.C.S.

3 –

39

G2 – 11

G1

41 –

50

FLFL

VFL

FL_CS

26 BACKLIGHT_LED

47P_CONT_FL

P_CONT1 44

136VBUS_OE

IC801

REMOTECONTROLRECEIVER

P_CONT_FL

P_CONT1IC701

+5V REGULATOR.DM 5V

IC702+3.3V REGULATOR.D+3.3V E+3.3V

UNREG6V_FL_DM

UNREG6V_D

A12V

UNREG6V_USB

UNREG+M9V

SW+3.3V

IC703+5V REGULATOR.D+5V

M+9V

SW+9V

IC705+9V REGULATOR.A+9V

IC704+5V REGULATOR.USB +5V

IC110+1.8V REGULATORSERVO DSP +1.8V

IC107+3.3V REGULATOR

RF+3.3V

IC105+3.3V REGULATORSERVO DSP2 +3.3V

SERVO DSP1 +3.3V

IC803+3.3V REGULATORPANEL +3.3V

FOR FLUORESCENTINDICATOR TUBE

636261

XRST 66 FL_RESET60

GRID DRIVEQ802

LED DRIVERQ821

D871

56 LED_1LED DRIVERQ871

D873

57 LED_2LED DRIVERQ872

AUTO

A.F.D STD

(F200)

(F500)

(F200)

(F500)

CN702

2

7

4

TOSA-WSF200/WSF500

8

5

SW+5V

I/

S871

HCD-F200/F500

HCD-F200/F500

3333

• Circuit Boards Location

FL board

KEY-R board

MS-214 board

DMB-FIT board

MAIN board

USB board

CENTER board

KEY-L board

For Schematic Diagrams.Note:• All capacitors are in μF unless otherwise noted. (p: pF) 50

WV or less are not indicated except for electrolytics and tantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise specifi ed.

• f : internal component.• C : panel designation.

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.(In addition to this, the necessary note is printed in each block.)

• A : B+ Line.• B : B– Line.• Voltages and waveforms are dc with respect to ground

under no-signal (detuned) conditions.– DMB-FIT Board – no mark : DVD PLAY– Other Boards – no mark : TUNER (FM) ( ) : DVD PLAY• Voltages are taken with VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production

tolerances.• Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production

tolerances.• Circled numbers refer to waveforms.• Signal path. J : CD PLAY c : DVD PLAY F : AUDIO E : VIDEO f : TUNER (FM) N : MIC P : USB• Abbreviation AUS : Australian model CND : Canadian model E3 : 240V AC area in E model E15 : Iranian model E32 : Latin American model (110 – 240V AC area) EA : Saudi Arabia model KR : Korean model MX : Mexican model RU : Russian model SP : Singapore model TH : Thai model TW : Taiwan model

For Printed Wiring Boards.Note:• X : Parts extracted from the component side.• Y : parts extracted from the conductor side.• f : internal component.• : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.)

Caution:Pattern face side: (SIDE B)Parts face side:(SIDE A)

Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.

Note: The components identi-fi ed by mark 0 or dotted line with mark 0 are criti-cal for safety. Replace only with part number specifi ed.

Note: Les composants identifi és par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le nu-méro spécifi é.

Caution:Pattern face side:(Conductor Side)Parts face side: (Component Side)

Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.

• DMB-FIT board is multi-layer printed board. However, the patterns of intermediate layers have not

been included in diagrams.• Indication of transistor.

C

BThese are omitted.

E

Q

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

3434

6-5. PRINTED WIRING BOARDS - DMB-FIT Section (1/2) - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

11213 48

24

25 36

37

1218 19

1 5

12 14

15

5

8

4

1

1

27

2854

FB604

FB605 FB39

01

FB606

FB3902

R380

3

R210

R3804

R380

5R3

807

R214

R3808

R215

IC3801

R216R219

D110

1

D1102

D110

3

R381

0

R3811

CN20

1

R1101

CN202

R110

2

R381

3

R220

R381

4

R221

R381

5

R223

C113

0

R224

R225R2

26

R1110R230

R111

4

R231

R111

5

R232

R233 R234

R236

CN60

2

R237

R238

R239

R112

1R1

123

C203 C205C206

R112

7R1

128

C208

C209

R246R247 C210 C2

11

R1133

R1134

CL101

C217

CL103

R113

8

C218

CL104

R113

9

CL105

CL106

(NC)

C602

CL107

C603

CL10

8

CL10

9

R114

0

C220

R114

1

C221

R114

2

C222

R114

3

CL11

0

C226

CL112

CL113

CL114

CL115CL116

CL117

CL118

C233

CL12

1CL

123

CL70

1CL

702

R1167R1168

R1746

R117

1

R1176R1

177

R1178

R1179

Q101

Q103

R250

5

RB10

3

RB10

4

RB105 RB106

RB107 RB108

RB109

CL16

0

RB110

RB11

1

RB11

2

RB113

RB11

4

RB11

5

IC201

L701

L702

L703

L704

C3901

FB106

FB10

8

FB11

1

R101

FB11

2

R103

FB116

R107

R108

R109

R110

R111R116

R117

R118

CN10

1

R120

FB1104

R121

CN43

01

CN10

6

R123

R124

CN110

IRM1

R901

IRM2

R132

R902

IRM3

IRM4

IRM5

R135

L3801

R136

R139

FB1120

FB1121FB1122FB1124FB1125

R911

C105

CN701

R142

R912

R913

R914

L110

1

C111X101

C112

R151R152

R153

C117

R154

C118

R155

C119

Q9724

C120Q9

729

E

C121

CL201

C122

CL202

C123

CL203

C124

CL204

CL20

5

CL20

6

CL30

03

CL207

CL30

04

CL20

8

CL209

R742

D971

2

R743

R744

R747

R748

C130

CL210CL211

R4701

C132

CL212

R4702

C133

CL21

3

R4703R4704

R171

C135

R4705

C137

C138

C139

R752

R179

C140

R9918 C141

R180

C145

FL39

01

C146

C147C148

R992

0

C149

C725

R9922

C728

R189

R992

8

C152

C153

R190

R191

CL38

01

CL38

02

R193

CL38

03

C734

CL3804

R195

CL38

05

CL38

06

R197

CL38

07

R993

5

CL11

01CL

1102

CL1103

CL1104

C169

R994

1

R783

CL11

07CL

1108

R994

5CL1109

C177

IC101

C182

IC102

C183

IC103 C184

CL1120

IC104CL

1121

IC105

C186

CL11

22

C187

C190

IC110

C198

CL11

36

CN3802

FL601

FL602

FL603

IC705

C3801C3803

C3804

CN1101

C3808

C381

0

C3811

C3815

C3816

C3818

C1109

C3820

C1110

C1112

R207 R208R209

FB60

1

C111

6

FB602

C111

7

FB603

M001(LOADING)

CN001

S001

S002

S002(CHUCKING)

S003

7162

S001(DISC IN/OU T)

S003(TRIGGER)

CL502

CL503

CL504

CL505

CL50

6

CL507

CL50

8

CL509

CL510

CL51

1

C502

1

41

5

CN50

1

CN50

2

E

D2G1S1

S2G2D1

E

DMB-FIT BOARD (SIDE A)

MS-214 BOARD

OPTICAL PICK-UPBLOCK

(KHM-313CAB)

BMAIN

BOARDCN708

1

1

6

9

1

23

2

24

1

6

7 16 2

1 1819

5 4

1 3

1

1

256

64

65

128

129 192

193

124

4825

1 3(F

500)

(F50

0: CN

D)

(F50

0: E3

2, MX

)

F200

: AEP

, UK/

F500

: RU,

E3

, E15

, EA,

AUS

(F20

0)

F200

: SP,

TH/

F500

: SP,

TW, K

R, T

H

(F200)

(F500)

5

4

1

3

54

1 8

CMAIN

BOARDCN105

HDMI OUT DM PORT

1-875-969 - 11

AMAIN

BOARDCN106

M

1-86

2-78

0-

11

(11)

1-875-968-

11

(11)

1-875-968-

11

(11)

USB BOARD (COMPONENT SIDE)

USB BOARD (CONDUCTOR SIDE)

CN501(USB)

A

B

C

D

E

F

1 2 3 4 5 6 7 8 9 10 11

Ref. No. Location

• Semiconductor Location

D1101 C-6 D1102 C-6 D1103 C-6 D9712 F-4 IC101 D-6 IC102 D-5 IC103 E-4 IC104 F-5 IC105 E-7 IC110 C-5 IC201 B-7 IC705 E-6 IC3801 E-8 Q101 C-8 Q103 C-8 Q9724 E-4 Q9729 F-4

(Page 40)

(Page 41)

(Page 40)Note: IC102 and IC103 cannot exchange with single. When IC102 and

IC103 are damaged, exchange the entire mounted board.

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

3535

6-6. PRINTED WIRING BOARDS - DMB-FIT Section (2/2) - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

C1E1

B1B2

E2C2

C111

8

C111

9

C150

2

C150

3

R212

R380

6

R213

R1104

R110

5

R222

R3816R3817

R110

8

R227

R228

JL25

01

R243

R112

9

C212C213C214

C215

C1161

C219

JL201JL202JL203JL204JL205JL206

C223

JL20

7

C224

JL20

8C2

25

JL21

0JL

209

JL21

1JL212

JL213

R1150R1151R1152

R1155

JL601JL603

JL609

JL611JL613

Q102

Q105

R1180

R1182

R118

4R1

185

R1187R1188

JL3901

JL39

02JL

3903

Q701

RB12

1

JL1201

JL12

02JL

1203

JL12

04JL

1205

JL12

06JL

1207

JL12

08JL

1209

JL12

10JL

1211

JL12

12JL

1213

FB10

7FB

109

R102

FB115

R105

R106

FB11

7

FB11

8

JL4701

R112

JL4702

R113

JL4703

FB124

R114

JL4704

R115

JL4705 JL4706JL4707 JL4708JL4709

FB11

01

FB1103

JL4710JL4711

JL4712JL4713JL4714JL4715JL4716JL4717JL4718

R1200

JL4719

R120

2

R133

C101

C102

R140

R141

C106

C108C109

C113

C114

C115

C116

R730

R156

Q9726

Q9728

JL107JL108

C125

JL109

C126 C127

C129

JL110 JL111JL112

R749

C136

R750

R175

R751

R753

C144

JL30

01JL

3002

C727

R992

4

C729

C151

R992

9

C154

C730

C155

C731

C156

C732

C733

C158

C159

R198

R9934

C160

C161

C162

C163 C164

C165

R781R782

R784

R785R786

C170C171

C172

C997

2

C174

C175

C176

JL3802

JL3803

JL38

04

C3001

C179

JL38

05

JL38

06JL

3807

JL38

08JL

3809

C180

C181

JL1101

JL38

12

JL1102

JL38

13

IC107

JL1103

JL38

14

JL1104

JL38

15

JL11

05

JL11

06

JL11

07

JL3818

JL1108

JL1109

C191

C192

C193

JL11

10

C195

JL11

11 JL11

12

C197

JL1113JL1114

C199

JL11

15

JL1116

JL1117

JL11

18

JL1119

R3001R3002R3003

R3004

JL1120

R3005

JL11

21JL

1122

JL11

23JL

1124

IC3001

IC707

IC708

JL11

31JL

1132

JL11

33JL11

34

C110

0

JL11

35

C110

8

C3819

R204

R205

R206

C1114

C1115

JL38

10

JL38

11JL

3816

JL38

17

SG

D (F500)E

E

DMB-FIT BOARD (SIDE B)

1-875-969 - 11

5 4

1 3

5

4

1

3

5

4

1

3

54D2 G1S1

S2 G2 D113

A

B

C

D

E

F

1 2 3 4 5 6 Ref. No. Location


IC107 D-3 IC707 F-3 IC708 F-3 IC3001 F-4 Q102 C-2 Q105 E-4 Q701 F-4 Q9726 F-6 Q9728 E-6

HCD-F200/F500

HCD-F200/F500

3636

6-7. SCHEMATIC DIAGRAM - DMB-FIT Section (1/4) -

BOARDMAIN(2/3)

CN105

C

BOARDMAIN(1/3)

CN708

B

BOARDDMB-FIT

(2/4)

6

BOARDDMB-FIT

(2/4)

7

BOARDDMB-FIT

(3/4)

8

BOARDDMB-FIT

(4/4)

9

4.5

0

4.5

4.5

4.5

4.5

9

R47030

R47010

R47050

R47020

R47040

FB606

FB605

FB604

FB601

FB602

FB603

JL603

JL601

JL613

JL611

JL609

JL4701

JL4702

JL4703

JL4704

JL4705

JL4706

JL4707

JL4708

JL4709

JL4710

JL4711

JL4712

EMIG

FL602

C

Y

Y/G

CB/B

CR/R

10V47

C603

10V47

C602

EMIG

FL601

EMIG

FL603

R9110

R9120

R9130

JL4713

JL4714

JL4715

JL4716

JL4717

JL4718

JL4719

1

2

3

4

5

6

7

SW+5V

GND

SW+3.3V

SW+9V

MGND

DM+5V

GND

1

2

3

4

5

6

7

8

9

9PCN602

SW+5V

GND

SW+3.3V

SW+9V

MGND

DM+5V

GND

USB+5V

A+9V

FB3901

10V47

C3901FB3902

EMIG

FL3901

JL3901

JL3902

JL3903

R9010

R9020

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

19PCN4301

DM_R

AGND

DM_L

DET A/D

DM_RXD

DM_TXD

VGND

DMVIDEO

D-GND

C

D-GND

Y

D-GND

Y/G

D-GND

Cb/B

D-GND

Cr/R

D-GND

JL3812

100R3817

22kR3803

R381022k

R380675

CL3802

100R3816

JL3802

6.3V100

C3820

R38

114.

7k

R381322k

50V1

C3815

JL3817

R3807(F200) (F500: CND)

(F500: E32, MX)

F200: AEP, UK/F500: RU, E3, E15,

EA, AUS

(F500)

22k

50V

C38041

50V1

C3803

6.3V

C3811100

CL3803

CL3807

C38

100.

1

R3814

VCC

GND

22k

JL3818

JL3805

CL3806

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

18PCN3802

PGND

VBUS(5V)

NC

VBUS(5V)

RXD

TXD

DET

DGND

WM DET

WM A/D

L-(AGND)

R-(AGND)

L+(Lch)

R+(Rch)

WM RX

WM TX

VIDEO

VGND

JL3803

JL3813

JL3814

R380522k

JL3815

10V

C380847

50V1C3801

JL3807

JL3808

50V

C38161

JL3810

JL3811

CL3804

JL3816

R38084.7k

56

78

43

21

NJM4565M(TE2)IC3801

JL3804

JL3806

CL3805

R380422k

50V1

C3818

CL3801

L380110uH

JL3809

0.1C3819

SW+5V

SW+3.3V

SW+9V

GND

SW+3.3V

SW+5V

USB+5V

GND

GND

MTR_GND

SW+9V

22kR3815

R9140

-

+

+

-

IC3801LINE AMP

(1/4)DMB-FIT BOARDDMPORT

F200: SP, TH/F500: SP, TW,

KR, TH

4

B

6 9 11

D

103 5 12

C

F

1

E

8

G

A

2 7

(Page 43)

(Page 37)

(Page 38)

(Page 39)

(Page 42)

(Page 37)

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

3737

6-8. SCHEMATIC DIAGRAM - DMB-FIT Section (2/4) - • See page 49 for Waveforms. • See page 50 for IC Block Diagrams. • See page 52 for IC Pin Function Description.

DMB-FIT

1BOARD

(3/4)

DMB-FIT

10BOARD

(3/4)

DMB-FIT

11BOARD

(4/4)

DMB-FIT

2BOARD

(3/4)

DMB-FIT

3BOARD

(3/4)

BOARD5 (3/4)DMB-FIT

BOARD15 (4/4)DMB-FIT

DMB-FIT

4BOARD

(3/4)

BOARDDMB-FIT

(3/4)

12

BOARDDMB-FIT

(4/4)

14

BOARDDMB-FIT

(3/4)

13

BOARDDMB-FIT

(1/4)

6

BOARDDMB-FIT

(1/4)

7

6

5

43

2

1

IC B/D

IC B/D

1.7

1.7

0.9

3.3

1.7

1.7

1.7

1.7

1.7

2.1

2.1

2.1

2.1

2.1

2.1

0.2

0.2

2.6

3.3

3.3

2.7

2

1.4

1.3

1.7

1.7

1.4

1.4

1.4

0

1.6

1.4

1.4

1.8

0

0

3.3

0.8

1.8

0

0

0

0

1.8

2.1

2.5

∗

∗

∗

∗

∗

∗

∗

0.7

3.3

0.7

3.3

0.7

0.7

0.7

0

0

1.8

0

0

0

0

1.8

0

0

0

3.3

3.3

1.3

0

3.1

1.8

3.1

3.2

3.2

3.3

1.6

1.5

1.2

1.9

0

0.1

0

3.2

1.6

1.4

1.8

1

0.9

0

2.4

2.5

2.8

3.1

3

3.2

1.8

3.3

3.2

1.5

1.6

3.3

1.7

1.4

1.5

1.4

1.4

3.3

3.3

1.6

1.5

1.6

1.5

3.3

1.6

1.4

0 0.8

1.8

1.8

3.3

0 0 3.3

3.3

00 1.6

3.3

1.6

0 0 03.3

1.8

3.3

1.2

1.2

3.3

3.3 ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ 0 2 0 ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗

1.8 0

3.2

3.3 0

3.2

3.3 ∗

3.2

3.2

0.4 0

3.2

3.2

3.4

2.6

1.6

3.3

1.3 1 1 1

1.3

3.3

1.3

1.5

1.6

1.3

2.1

1.6 2

1.6

1.7

1.8

3.3

0

3.4

2.8

0

2.8

1.7

3.4

2.93.4

3.5

0

3.3

0

3.3

4.9 5 9.

3

1.3

3.2 0.

1

1.3

3.3

9.3

3.3

3.2

3.2

5

5

3.2

3.1

0.2

0.2

0.2

0

0

0.1

0

3.2

1.6

3

0.3

3.2

0.3

0.1

0.3

0.4

3.2

1.2

1.2

0.9

3.2

0.2

0.2

0

0.1

0

0

0.5

3.1

3.2

3.2

3.2

3

3.2

0.4

0.3

0.3

3.2

0.4

0.3

0.1

0.4

3.2

0.3

3.2

3.2

3.2

3.4

3.4

0.1C149

0.1C133

47RB106

0.01C162

3.3k

R11

51

0.1C179

100

R15

6

0.01

C15

6

0R

B113

0.1

C13

7

0.01C164

1C120

0.01C175

0.03

3C

135

0R

152

1C122

0.01C136

0.1C126

0.01C161

1C124

3.3k

R11

50

0.04

7C

148

0.1C130

0.01C155

47RB105

0.1

C14

0

0.1C125

3.3k

R11

52

0.01

C16

3

0.1C132

10V47

C177

22p

C13

9

0.01C158

0R

B112

0.01C174

100kR132

0.01C127

10V47

C190

0.1C146

0.01

C16

00.01C176

0.1C191

1C123

0.04

7C

147

15kR136

0.1C197

0.01C144

0.1C180

C1690.1

1C121

REV

FWD

SPFG

TSD_M

0.1C181

0R

1176

CL121 CL1

101

CL1

102

0R

153

CL123

LIMITSW

0R139

22R1114

0RB110

0RB104

0RB111

0RB109

0RB103

0RB115

0RB114

0R133

0R175

R18

915

0

R19

715

0

R19

515

0

R11

0215

0

R19

015

0

FB1121

FB1120

FB1124

FB1125

FB1122

MUTE

R11

820

MUTE123

R11

880

SPDIF

R11

87470.

1C

171

100kR1420

R11

6712

pC

152

15p

C15

3

1000

pC

151

680k

R14

1 FB10

7

16V

10C

145

FB11

01

4.7

C11

086.3V

100C

1109

FB11

03

FB106

0RB107

0RB108

1000pC138

220

R11

68

6.3V

100C

1110

CL1120

0.1

C15

4

0.1

C16

5

FB10

9

1

2

4

3

L701

1

2

4

3

L702

1

2

4

3

L703

1

2

4

3

L704

D1

G2

S2D2

G1

S1

UM6K1N-TNQ701

54

TK11

150C

SCL-

GIC

707

CO

NT

GN

D

NO

ISE

VOU

T

VIN

3

2

1

4

5

TC7SZ08FU(TE85R)IC705

A

B

VSS Y

VDD

0R786

0R785

0R784

0R783

0R747

0R748

1.8kR749

1.8kR750

CL701

0.01C725

R74

44.

7k

0.01

C72

7

SW+9V

0.22

C73

0

0.22

C72

910V

47C

728

0R

1177

CL1

136

100R1180

1000pC1161

OC

SW

CKS

W

5600pC1502

FB11

5

FB11

6

10C1115

0.1C1114

0.1C1116

10C1117

FB11

7

0.1C1118

4.7C1503

R30

050

FB118

0.1C172

1000pC1119

CL1

121

CL1

122

R11

080

CL7020R1746

220R9945

0R9935

RT1N141C-TP-1Q9729

2SC4154TP-1EFQ9728 2SC4154TP-1E F

Q9726

27kR9941

22kR9928

1kR9924

10kR9934

22kR9929

10kR9922

R9920 0

0.1C9972

1500

pC

170

10kR1155

2.7kR730

560R1101

0R1121

0R1123

1kR140

R112710k

R112810k

USB_OCD

USB_SW

1kR9918

47kR742

GND

XRST

54

3 2 13 2 1TK

1113

3CSC

L-G

IC70

8

CO

NT

GN

D

NO

ISE

VOU

T

VIN

0R753

SW+5V

C7310.22

C732 0.01

C73

30.

22

10V

C73

447

R1200 0

3.3kR781

3.3kR782

4.7kR1104

2SK2009(TE85L)B+ SWITCH

Q105

0R180

0R179

0.01C108

0.01C109

3.3kR1202

FB124

S

0.1C141

ISA1602AM1TP-1EFQ9724

10k

RB1

21

5.1kR103

CEC_TX_OUT

E+3.3V

CEC_RX_OUT

RB751V-40TE-17D9712

10k

R30

03

10k

R30

02

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230240 231232233234235236237238239241242243244255256 245246247248249250251252253254

IC101CXD9894R (EXCEPT F500: CND)CXD9915R (F500: CND)

OSN

RFGC

IREF

AVDD3

AGND

DVDA

DVDB

DVDC

DVDD

DVDRFIP

MA

MB

MC

MD

SA

SB

TNI

TPI

MDI 1

MDI 2

LDO2

LDO1

SVDD3

CSO

RFLVL

SGND

V2REFO

V2O

VREFO

FEO

TEO

TEZISLV

OP_OUT

OP_INN

OP_INP

DMO

FMO

TROPENPWM

IOPMON

TRO

FOO

AGND18

AVDD18

USB_DP

USB_DM

USB_VDD3

USB_VSS

PAD_VRT

USB_VDD18

USB_VSS

DIR_ERROR

DIR_AUDIO

LIMITSW

MSW

DVDD18

HA2

HA3

HA4

HA5

HA6

HA7

HA8

HA18

HA19

DVD

D3

XWR

HA1

6

HA1

5

HA1

4

HA1

3

HA1

2

HA1

1

HA1

0

HA9

HA2

0

XRO

MC

S

HA1

XRD

HD

0

HD

1

DVS

S

HD

2

HD

3

HD

4

HD

5

HD

6

HA2

1

RES

ERVE

D

HD

7

DVS

S

HA1

7

HA0

DVD

D18

FWD

REV

DVD

D3

IFSD

O

IFC

K

xIFC

S

IFSD

I

SCL

SDA

CKS

W

OC

SW

RXD

TXD

ICE

xSYS

RST

RES

ERVE

D

xIFB

SY

DQ

M0

EEW

P

RD

7

RD

6

RD

5

RD

4

RD

3

DVD

D3

RD

2

RD

1

RD

0

RD

15

RD

14

RD

13

RD

12

RD

11

RD

10

RD

9

RD8

TSD_M

DVDD3

DQM1

_RWE

_CAS

_RAS

_RCS

BA0

BA1

RA10

RA0

RA1

DVDD18

RA2

RA3

DVDD3

DRCLK

CKE

DVSS

RA11

RA9

RA8

RA7

RA6

RA5

RA4

DVDD3

MUTE123

MUTE

DDC_DA

DVDD18

DDC_CLK

HTPLG

AGND3

EXT_RES

AVDD3

AVDD3

EXT_CAP

AGND3

AGND18

TXCN

TXCP

AVDD18

TX0N

TX0P

AGND18

TX1N

TX1P

AVDD18

TX2N

TX2P

AGND18

R/Cr/Pr

B/Cb/Pb

DACVSSA

Y/G

DACVDDA

CVBS

DACVSSB

C

DACVDDB

Y

DACVSSC

FS

VREF

DAC

VDD

C

VBU

S_O

E

VBU

S_O

C

SCO

RE/

DIR

_XST

ATE

SPM

CK

SPBC

K

SPLR

CK

SPD

ATA

ACLK

ABC

K

ALR

CK

MC

_DAT

A/AD

IIN

DVD

D3

MIC

WID

E

RG

B_SE

L/D

SEL

TRG

_SW

DVD

D18

KMO

D

XVO

ICE/

DIR

_CSF

LAG

SPD

IF

APLL

VDD

3

APLL

CAP

APLL

VSS

ADAC

VSS2

ADAC

VSS1

DIR

_CE

ASD

ATA3

ASD

ATA2

AVC

M

ASD

ATA1

ASD

ATA0

DIR

_CL

ADAC

VDD

1

ADAC

VDD

2

Lt/D

IR_D

I

Rt/D

IR_D

O

ADAC

VSS3

ADAC

VDD

3

SAD

CVD

D18

SAD

CVS

S18

RFG

ND

18

RFV

DD

18

XTAL

O

XTAL

I

JITF

O

JITF

N

PLLV

SS

PLLV

DD

3

LPFO

N

LPFI

P

LPFI

N

LPFO

P

ADC

VDD

3

ADC

VSS

RFV

DD

3

RFR

PDC

RFR

PAC

HR

FZC

CRT

PLP

RFG

ND

18

OSP

10k

R30

01

CL101

CL104

CL105

CL103

CL108

CL110

CL109

CL1107

CL1108

CL1109

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

TMDS DATA2+

TMDS DATA2 SHIELD

TMDS DATA2-

TMDS DATA1+

TMDS DATA1 SHIELD

TMDS DATA1-

TMDS DATA0+

TMDS DATA0 SHIELD

TMDS DATA0-

TMDS CLOCK+

TMDS CLOCK SHIELD

TMDS CLOCK-

CEC

RESERVED

SCL

SDA

DOC/CEC GND

+5 POWER

HPD

CL160

CL3004

CL3

003

27MHzX101

10k

R30

04

5 4

321

TC7S

Z08F

U(T

E85R

)IC

3001

A B VSS

Y

VDD

0.01C3001

PCONT_HDMI

0R743

(F20

0)

(F500)

4748

49

8

5051

5253

54

76

54

32

1

4142

4344

4546

1413

1211

109

3440

3536

3738

39 1615

1718

1920

21

28 27

2930

3132

33

2625

2423

22

M12L64164A-7T(G)IC104

VDD

DG0

VDDQ

DQ1

DQ2

VSSQ

DQ3

DQ4

VDDQ

DQ5

DQ6

VSSQ

DQ7

VDD

LDQM

WE

CAS

RAS

CS

BA0

BA1

A10/AP

A0

A1

A2

A3

VDDVSS

A4

A5

A6

A7

A8

A9

A11

NC

CLKE

CLK

UDQM

NC

VSS

DQ8

VDDQ

DQ9

DQ10

VSSQ

DQ11

DQ12

VDDQ

DQ13

DQ14

VSSQ

DQ15

VSS

R11

150

FB108

100R1184

100R1185

0R751

0R752

Y

CB/B

Y/G

C

CR/R

100

R17

1

100

R11

79

A0A20

A13

A14

A15

A16

HD

2

HD

4

HD

6

RA4

RA5

RA6

RA7

RA8

RA9

RA11

CR/R

CB/B

C

Y

A19

A18

A2

A3

A4

A5

A6

A7

XRO

MC

S

A1 XRD

HD

0

HD

1

HD

5

HD

7

A17

RA4

RA5

RA6

RA7

RA8

RA9

CLKE

RA11

CLKE

RA3

RA2

RA1

RA0

RA10

BA1

BA0

RCS

RAS

CAS

RWE

DQM0RAS

CAS

RWE

DQM1 RD7

RD6

RD5

RD4

RD3

RD2

RD1

RD0

RA3

RA2

RA1

RA0

RA10

BA1

BA0

RCS

VOB

VOA

DMO

FMO

TROPENPWM

TRO

FOO

USBP

VOC

VOD

VOE

VOF

A8

A12

A11

A10

A9

RD

5

RD

4

RD

6

RD

7

RD

3

RD

2

RD

1

RD

0

A21

DQ

M0

DQM1

CR/R

CB/B

Y/G

C

Y

Y/G

USBM

HD

3

XWR

RF AMP, SERVO DSP, MPEG DECODER

IC101

HDMI POWERCONTROL

IC3001

SD-RAM

IC104

IC705

LEVEL SHIFT


IC707+5V REGULATOR

4

5

1

2

7

6

8

9

10

11

12

14

17

3

15

16

18

19

20

21 22 23 24 25 26 27 28 29 30 31 32

DMB-FIT BOARD (2/4)

19PCN701HDMI OUT

Q9724, 9726, 9728, 9729CEC DATA SWITCH

SW+3.3V

J

4

B

166 219 11

D

N

15

H

L

10

K

173 5 12

C

F

18

M

O

1 19

E

8

G

20 232214

A

2 13

I

7

HDMI POWER CONTROL

(Page 38)

(Page 38)

(Page 38)

(Page 39)

(Page 38)

(Page 38)

(Page 39) (Page 38)

(Page 39)

(Page 38)

(Page 36)

(Page 36)

(Page 38)

HCD-F200/F500

HCD-F200/F500

3838

6-9. SCHEMATIC DIAGRAM - DMB-FIT Section (3/4) - • See page 50 for IC Block Diagrams.

(2/3)

MAIN

CN106

ABOARD

(2/4)BOARD

3DMB-FIT

(4/4)BOARD

16DMB-FIT

(1/4)BOARD

8DMB-FIT

(4/4)BOARD

17DMB-FIT

DMB-FIT

1BOARD

(2/4)

DMB-FIT

18BOARD

(4/4)

DMB-FIT

13BOARD

(2/4)

DMB-FIT

10BOARD

(2/4)

DMB-FIT

12BOARD

(2/4)

2(2/4)

DMB-FITBOARD

(2/4)BOARD

4DMB-FIT

(2/4)BOARD

5DMB-FIT

IC B/D

IC B/D

3.3

53.2

1.3

3.2 1.8

3.2

1.3

4.9

3.3

3.2

3.2

3.2

1..0

00

3.2

3.2

0.1

0.20

3.32.6

3.2

2.4

3.6

0

0.1

∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗∗ 3.2

0 0 2

∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗0

3.2

3.2

3.2

3.2

2.5

2.1

47kR124

1C102

0.01C192

5 4TK11133CSCL-G

IC105

CO

NT

GN

D

NO

ISE

VOU

T

VIN

22R112

4700pC199

2.7kR1110

100kR114

0.1C116

0R109

0.01C113

10k

R10

5

22R11

5

100

R10

1

10kR107

10V47

C105

1kR19

3

0.22C195

47kR117

0.22C182

1kR116

0.01C101

22R12

1

0.1C115

0.01C184

10V

47C11

2

1MR108

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

CN10124P

GND (LD)

LD (650)

NC

NC

PD

LD (780)

VR (650)

VR (780)

NC

VOE/E+G

VCC

VC

GND (PDIC)

VOF/F+H

VOB/B

VOA/A

RF

MSW

VOD/D

VOC/C

TRK-

TRK+

FCS+

FCS-

0.01C106

0R155

22R11

3

5

43

2

1

TK11133CSCL-GIC107

CONT

GND

NOISE VOUT

VIN

0R123

10k

R10

6

1kR19

1

47k

R11

0

0.22C193

22R11

8

RT1N241C-TP-1INVERTER

Q103

22R12

0

100kR1129

100R111

D1

G2

S2D2

G1

S1

UM6K1N-TNQ101

CD ON SWITCHQ101-1

DVD ON SWITCHQ101-2

Q102

Q102-1AUTO POWER CONTROL (FOR CD)

Q102-2AUTO POWER CONTROL (FOR DVD)

QST8TR

JL1101

JL1102

JL1105

JL1106

JL1107

JL1108

JL1110

JL1111

JL1112

JL1113

JL1114

JL1115

JL1116

JL1117

JL1118

JL1119

JL1120

JL1121

JL1122

JL1123

JL1124

JL1213

JL1212

JL1210

JL1209

JL1208

JL1207

JL1206

JL1205

JL1204

JL1203

JL1202

JL1201

JL107

JL108

JL109

JL110

JL111

JL112

0R1133

REG01

SW+3.3V

TRK-

TRK+

FCS+

FCS-

OCSW1

REG02

TRO

IOP

FOO

IOPMON

DMO

FMO

TROPENPWM

VREFO

RF+3.3V

SW+5V

SW+3.3V

-2 -1

MM1661JTREIC110

2

31

1C198

0.33C183

10V47

C1871k

R1178

SW+5V

GND

0.22C186

10kR151

FB112

0R1134

0.01C1130

FB111

0R154

CL112

CL113

CL114

CL115

CL116

CL117

CL118

0R1143

0R1138

0R1139

0R1140

0R1141

0R1142

0R1171

CL1103

CL1104

0.1C114

JL1103

JL1104

JL1109

6.3V220

C1112

XRST

6.3V100

C11110

C1290.1

C159

10V47

C117

10V47

C118

10V47

C119

FB1104

USB+5V

100R198

0.01C1100

1kR13

5

JL1131

JL1132

JL1133

JL1134

R1020

14

23

L1101

MAZ

8082

G0L

S0D

1101

MAZ

8068

G0L

S0D

1102

MAZ

8068

G0L

S0D

1103

E+3.3V

SPDIF

CEC_RX_OUT

CEC_TX_OUT

JL3001

JL3002

USB_SW

USB_OCD

8 7 6 5

4321

1 2 3

S-24CS64A01-J8T1GIC103

A0 A1 A2 GN

DSD

A

SCL

WE

VCC

1

2

3

4

5

6

6PCN106

TXD

RXD

GND

+3.3V

V2REFO

RFMON

1

2

3

4

5

5PCN1101

VBUS

D-

D+

GND

SHEILD

1

2

3

4

5

6

7

8

9

10

11

12

13

CEC_RX_OUT

CEC_TX_OUT

SPDIF

DGND

IFSCK

E+3.3V

IFSDO

IFSDIXIFBSY

XIFCS

P_CONT_HDMI

XSYSRST

OCSW1/GND14

15

15PCN110

USB_OCD

USB_SW

JL1135

CL106

CL107

48 43

65

46

4321

47 45 44 42 41 37383940

1210 11987

36 3132333435

181716151413

30 29 28 27 26 25

242322212019

ES29LV320EB70TG-SHE1-0802CE(F200: AEP, UK)

ES29LV320EB70TG-SHE1-0802GA(F200: SP, TH)

ES29LV320EB70TG-SHE2-0802UC(F500: CND, E32, MX)

ES29LV320EB70TG-SHE2-0802CE(F500: RU, E3. E15, EA, AUS)

ES29LV320EB70TG-SHE2-0802GA(F500: SP, TW, KR, TH)

IC102

A15

A14

A13

A12

A11

A10

A9 A8 A19

N.C

WE

RES

ET

N.C

.

WP/

ACC

RY/B

Y

A18

A17

A7 A6 A5 A4 A3 A2 A1A0C

E

VSS

OE

DQ

0

DQ

8

DQ

1

DQ

9

DQ

2

DQ

10

DQ

3

DQ

11

VCC

DQ

4

DQ

12

DQ

5

DQ

13

DQ

6

DQ

14

DQ

7

DQ

15/A

-1

VSS

BYTEA1

6

JL1211

PCONT_HDMI

XWR

VOF

VOD

DMO

FMO

TROPENPWM

TRO

FOO

USBM

USBP

VOA

VOB

VOC

VOE

HD

1

HD

2

HD

3

HD

0

XRD

XRO

MC

S

A1A2A3A4A5A6A7A8A1

8

A19

A21

A20

A9A10

A11

A12

A13

A14

A15

A16

HD

4

HD

5

HD

6

HD

7

A0A17

22

30

23

25

29

21

32

27

26

28

24

31

9

15

2

7

1

10

17

6

4

11

16

12

5

19

8

18

3

20

14

EEPROM

IC103

+3.3V REGULATOR

IC105

FLASH ROM

IC102


(3/4)DMB-FIT BOARD

+3.3V REGULATORIC107

I O

(NC)

PICK-UPBLOCK

(KHM-313CAB)(1/2)

OPTICAL

CL510

CN5014P

(USB)CL509

C5020.1

CL506CL505

CL508

CL504

CL507

CL511

CL503

CL502

1

2

3

4

5

CN5025P

VBUS

D-

D+

GND

SHIELD

USB BOARD

1

2

3

4

J

4

B

166 9 11

D

15

H

L

10

K

173 5 12

C

F

181 19

E

8

G

2014

A

2 13

I

7

(Page 39)

(Page 37)

(Page 36)

(Page 39)

(Page 39)

(Page 37)

(Page 37)

(Page 37)

(Page 37)

(Page 37)

(Page 37)

(Page 37)

(Page 43)

Note: IC102 and IC103 cannot exchange with single. When IC102 and IC103 are damaged, exchange the entire mounted board.

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

3939

6-10. SCHEMATIC DIAGRAM - DMB-FIT Section (4/4) -

16(3/4)

BOARDDMB-FIT

15(2/4)

BOARDDMB-FIT

9(1/4)

BOARDDMB-FIT

(3/4)BOARD

17DMB-FIT

(2/4)BOARD

11DMB-FIT

(3/4)BOARD

18DMB-FIT

(2/4)BOARD

14DMB-FIT

1.4

2 2.1

0 5 1.4

2.9

2.9

1.7

9.3

9.3

4.6

1.4

1.4

1.4

1.4

1.4

3.2

3.2

2.2

1.4

1.4

1.4

1.4 4.8

5.8

3.2

4.5

4.5

3.6

5

4.5

4.5

4.4

4.5

9.3

3.2

3.2

3.2

3.2

3.2

3.201

1.4

0.01

C21

2

100kR223

16V47

C217

33kR208

220pC205

56kR221

15kR231

27kR219

16V10

C218

1.2kR204

0.03

3C

211

0.01C203

1000pC226

12kR216

0.01C219

1

2

3

4

5

6

6PCN201

SP-

SP+

LIMI T

(GND)LIMIT

SL-

SL+

15kR214

56k

R22

6

0.01

C21

3

0.01

C21

01k

R237

4700pC233

16V10

C220

33kR209

10kR205

10kR206

0R227

18kR232

1000pC225

82k

R23

0

0R228

100kR2250.033

C209

0.1C223

1kR236

10kR224

0.01C208

47kR210

33kR222

0.01C224

10kR212

6.8kR213

12kR215

4.7kR246

1kR220

220pC206

0.01C215

1000pC214

2.7kR207

JL206

JL205

JL203

JL204

JL202

JL201

13 14 15 16 17 18 19 20 21 22 23 24

25

26

27

28

29

30

31

32

33

34

35

36

12

11

10

9

8

7

6

5

4

3

2

1

373839404142434445464748

FIN

FIN

FIN

FIN

IC201FAN8036L

JL207

JL208

JL209

JL210

JL211

JL212

JL213

CL213

SPFG

SW+5V

TRO

VREFO

CKSW

FMO

OCSW

DMO

TROPENPWM

FCS-

IOP

IOPMON

REG02

GND

FCS+

TRK+

MUTE123

FOO

TRK-

RF+3.3V

MUTE

REG01

SW+3.3V

OCSW1

TSD_M

SW+9V

MTR_GND

0.1C222

CL201

CL202

CL203

CL204

CL2

05

CL2

06

CL2

07

CL2

08

CL209

CL210

CL211

CL212

0.1C221

33kR233

JL2501

1kR239

1kR238

47R243

R25050

1

2

3

4

5

6

7

7PCN202

TRG-SW

NC

LDM+

LDM-

GND

CKSW1/FWD

OCSW1/REV

REV

FWD

FOCUS/TRACKINGCOIL DRIVE, SPINDLE

SLED, LOADING MOTER DRIVE

IC201

(4/4)DMB-FIT BOARD

10kR234

1kR247LIMITSW

PICK-UPBLOCK

(KHM-313CAB)(2/2)

OPTICAL

7

6

5

4

3

2

1

OCSW1/REV

CKSW1/FWD

GND

LDM-

LDM+

NC

TRG_SW

CN001

S0017P

(DISC IN/OUT)S002

(CHUCKING)S003

(TRIGGER)

MS-214 BOARD

M001(LOADING)M

4

B

166 9 11

D

15

H

103 5 12

C

F

1

E

8

G

14

A

2 13

I

7

(Page 37)

(Page 38)

(Page 38)

(Page 37)

(Page 36)

(Page 37)

(Page 38)

HCD-F200/F500

HCD-F200/F500

4040

6-11. PRINTED WIRING BOARD - MAIN Board (Component Side) - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

BE

IO

11 6

17

32

3348

49

64

1 2

1617

12 18

19

12

1415

IO

IOIO

1

1 4

8 5

1617

32

1

9

61

5

61

5

61

5

61

5

61

5

65

1

1 4

8 5

1

1 3031

505180

81

100

134

5

4

85

R210

Q271

R212

R213R214

R215R216R217R218R219

R220

R221

R223

R224

FL27

2

C202

C203

C204

C205

C206

C207

C208

C209

C210

X201

C211

C212C215C216

R253

C218

R254

C219

R259

C223

C224

C220

C221

C222

C225

C226

R274R275R276

R278

R279

A301

R280

R281

R282

C251

C252C253

C254

C255

C256

C257

C258 C260

C261

C262

C264 C274

C278

IC201

C281C282

R101R102R103R105

R107

R108 R1

10

R111

R306

R112

R307

R114

R118

R119

IC25

1

CN10

3

R120

CN105

R121

CN10

6

R123

R125

R126

R127R128R129

R706

CN11

0

R709

R321

R322

R323

R324

R130IRM1

R325

R131

IRM2

R326

R132

IRM3

R133

IRM4

R712

R136

R713

R137

R138

R139

R717

IC273

R718

R719

C103

C104R1

40R1

42

R143

R914 R720R915

R145

R916

R146

R917

R147

R918

R148

IC281

R919

R725

C302

C304

X101

C305

R150

R151

R152

R153

R731R732

R733

R157

R734

C701

R161

C702

C703

C704

C705

C706

C707

C708

R168

C709

R169

C710

C711

C906

C712

C713

C908

C714

C909

C715

C718

C719

C910 C911

C913

C914

C720

C915

C721

C722

C723

C724

C732 C734

R391

D102

R392

R393

R394

R395

D301

IC101FL

201

FL202 FL203

ET701

ET702

ET703

IC701

IC702

IC703

IC704

IC705

IC706

IC709

IC902

FB203

R201

R202

R203

R205

L251

R206R207R208R209

(NC)

(F500)

(F200)

(F200: AEP, UK/F500: RU)

C DMB-FITBOARDCN4301 A DMB-FIT

BOARDCN110

(CHASSIS)

(CHASSIS)

(CHASSIS)

ECENTERBOARDCN852

(F200: AEP, UK/F500: RU, KR)

(F50

0: RU

)

(F50

0: KR

)

(F20

0: AE

P, UK

)(F

200:

SP, T

H)

MAIN BOARD (COMPONENT SIDE)

1-875-964 -

11

(11)

A

B

C

D

E

F

G

1 2 3 4 5 6 7

F500

: CND

, E3,

E15,

E32,

EA,

MX,

SP,

TW, T

H, A

US

Ref. No. Location


D102 E-3 D301 B-5 IC101 F-4 IC201 D-4 IC251 B-2 IC273 C-4 IC281 D-2 IC701 C-6 IC702 E-6 IC703 E-6 IC704 F-6 IC705 D-6 IC706 C-4 IC709 F-5 IC902 F-2 Q271 D-2

(Page 45)

(Page 34)(Page 34)

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

4141

6-12. PRINTED WIRING BOARD - MAIN Board (Conductor Side) - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

B E

R222

C201

C213

C214

CL101

R251

CL102

R252

CL103

C217

CL104

CL105

CL106

CL107

CL108

JL201

CL109

JL202

JL203

JL204

CL301

JL20

5

JL20

6

JL20

7

JL208

CL11

0

JL20

9

CL11

1

CL112

CL11

3CL

114

JL21

1

JL212

JL213

JL214

JL215

JL216

JL22

1

JL222 JL22

3

JL224

JL225JL226

JL227

JL228

JL229 JL230

JL231 JL232JL233

JL23

4

JL235 JL236

C259

C263

JL251

JL252

JL253JL254 JL255

JL256

JL257

JL258JL259

L301

JL260 JL261JL262

JL263

JL264

Q901

JL27

1

JL272

JL273JL274

JL275JL276

JL277

JL278JL279

JL280

JL281

R104

R106R1

09

R301

R302

R303

R304

R305

R113

R115

R116

R117

R122

R701

R702

R703

R704

R705

R707

R708

R320

R901

R902

R903

R327

R904

R710

R328

R134

R711

R135

R906

R907

R908

R714

R909

R715

R716

C101

C102

R910

R911

R141

R912

C107

R913

R721

R722

R723

R724

C301

R149

C111

C112

R920

R921

R922

R923

R158

R159

CL201

R160

R163

JL301

R165

JL302

JL303

R167

JL30

4

JL305

JL30

6

JL307

JL308

JL309

C902

C903

C904

R170

C905

R941

R171

C907

JL310

JL311

JL312

C716

R946

JL313

JL31

4

JL31

6

JL31

7JL

318

JL70

1

JL31

9

JL70

2

C912

JL70

3JL

704 JL

705

JL70

6JL

707

JL70

8

JL32

0

JL70

9

JL321

JL322

JL323

JL324

JL325

JL326

JL327

JL71

0

JL328

JL71

1

JL329

JL71

2JL

713 JL

714

C731

JL71

5JL

716

C733

JL717

JL330JL

331

JL332

JL33

3

JL334

JL33

5JL

336

JL33

7JL

338

JL33

9

C942

L201 L202 L203

D701

D702

D703

D704

D705

D706

FB20

2R2

04

3

1

3

1

81

1 9

IC941

CN702

CN708

IC901

101CN107

10111

2 8

9

CN101CN102

J906

J907

J903

B DMB-FITBOARDCN602

(F200: AEP, UK/F500: RU)(EXCEPT F200: AEP, UK/F500: RU)

1-875-964 - (11)

11

TUNER(FM)

FM 75COAXIAL

ANTENNA

MAIN BOARD (CONDUCTOR SIDE)

TVAUDIO IN

L

VIDEO OUTCOMPONENT

Y

TVAUDIO IN

R

VIDEO OUTCOMPONENT

PB / CB

VIDEO OUTCOMPONENT

PR / CR

VIDEO OUTVIDEO

SAT/CABLEDIGITAL INCOAXIAL

DIGITAL OUTCOAXIAL

SAT/CABLEDIGITAL INOPTICAL

TVDIGITAL INOPTICAL

(F500)

J904ECM-AC2

A

B

C

D

E

F

G

1 2 3 4 5 6 7

TOSA-WSF200/F500

TOSA-WSF200/F500

(F200)

(F500)

(EXCEPT F200: AEP, UK/F500: RU)

Ref. No. Location


D701 C-2 D702 E-2 D703 E-2 D704 F-2 D705 D-2 D706 C-3 IC901 E-6 IC941 E-6 Q901 F-6

(Page 34)

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

4242

6-13. SCHEMATIC DIAGRAM - MAIN Board (1/3) - • See page 50 for IC Block Diagrams.

IC B/D IC B/D IC B/D IC B/D

IC B/D IC B/D

DMB-FITBOARD

(1/4)

B

CN602

1(2/3)

BOARDMAIN

2(2/3)

BOARDMAIN

3(2/3)

BOARDMAIN

3.2

6.5

5.1 1

3.4

6.5

5.2 1

3.4

11.8 9 1

3.4

6.5

4.9 1

3.4

3.7

3.3 1

3.4

6.5

5.1 1

3 8.9

5

5.1

8.9

0.1

C70

1

0.1

C70

3100R706

0.1

C70

7

0.1

C70

5100R709

100R712

3kR701

1kR704

1kR707

JL701

JL702

JL703

JL704

JL705

JL706

JL707

JL708

0.1

C71

2

0.1

C71

3

0.1

C71

4

0.1

C71

5

16V100

C718

16V100

C721

16V100

C706

39kR723

10kR708

10kR702

39kR721

39kR724

10kR711

10kR705

22kR722

16V100

C704

16V100

C702

16V100

C708

10V220

C720

10V220

C719100

R703

0.1

C71

10.

1C

710 10k

R716

16V100

C722100

R713

P_CONT1

0.1C724

100R725

33kR720

1W0.1R717

330R718

33kR719

0.1C723

4

3

2

1

5

6

7

8

NJM2903M-TE2IC709

GND

V+

USB_OCD

USB_SW

D3.3V

D5V68k

R715

12kR714

16V220

C709

P_CONT_FL

E4V

A9V

FL5V

JL709

JL710

JL711

JL712

JL713

JL714

JL717

JL715

JL716

MA2

J111

0GLS

0D

705

MA2

J111

0GLS

0D

703

MA2

J111

0GLS

0D

702

MA2

J111

0GLS

0D

701

MA2

J111

0GLS

0D

704

E

ET701

E

ET702

E

ET703

DGND

16V100

C732

MA2

J111

0GLS

0D

706

0.1

C73

30.

1C

731100

R733

39kR734

10kR732

16V100

C734

2.2kR710

6

SI-3010KM-TLSIC706

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

6

SI-3010KM-TLSIC703

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

6

1 2 3 4 5 1 2 3 4 5

1 2 3 4 51 2 3 4 51 2 3 4 51 2 3 4 5

SI-3010KM-TLSIC704

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

6

SI-3010KM-TLSIC705

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

6

SI-3010KM-TLSIC701

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

6

SI-3010KM-TLSIC702

ON

/OFF

VIN

GN

D

VOU

T

VAD

J

1

2

3

4

5

6

7

8

9

9PCN708

SW5V

GND

SW3.3V

SW9V

MGND

DM5V

GND

USB5V

A9V

1

2

3

4

5

6

7

8

8PCN702

DGND

UNREG6V_FL_DM

DGND

A12V

UNREG-M9V

MGND

UNREG6V_D

UNREG6V_USB

3.3kR731

(CHASSIS)

+9V REGULATOR

IC705 IC703+5V REGULATOR


IC701+5V REGULATOR

+5V REGULATOR

IC706

VBUS CONTROL

IC709

+5V REGULATOR

IC704

MAIN BOARD (1/3)

D3.3V

D5V

4

B

6 9 11

D

103 5 12

C

F

1

E

8

G

A

2 7

TOSA-WSF200/

WSF500

(Page 43)

(Page 43)

(Page 43)

(Page 36)

HCD-F200/F500

HCD-F200/F500

4343

6-14. SCHEMATIC DIAGRAM - MAIN Board (2/3) - • See page 49 for Waveforms. • See page 50 for IC Block Diagrams. • See page 52 for IC Pin Function Description.

ECENTER

CN852BOARD

A(3/4)

CN110

BOARDDMB-FIT

2BOARD

(1/3)

MAIN

1BOARD

(1/3)

MAIN

3BOARD

(1/3)

MAIN

6 BOARD(3/3)

MAIN

5BOARD

(3/3)

MAIN

4BOARD

(3/3)

MAIN

CCN4301

(1/4)

DMB-FITBOARD

IC B/D

IC B/D

12

13

14

15

11

16

2.6

0.6

0.1

3.5

1.7

2.6

2.1

4.9

3.3

4.9

0

2.5

4.9

2.5

2.5

2.5

2.5

0

3.3

0

1.6

0.1

0

2.4

4.9

4.9

2.4

2.4

2.4

2.4

2.4

2.4

2.4

2.4

1.2

0 2.9

0 0 3.2

0 3.2

2.6

3.2

3.5

3.2

3.3

0 3.4

3.4

3.5

0 0 3.4

0

0

3.4

3.4

3.4

2.5

3.5

3.5

1.5

0

3.5

3.5

3.4

3.4

0

3.5

3.2

0

3.4

0

0

0

3.4

1.6

2.5 0

3.4

0.1 0

0.6 0

3.4

2.6

3.6

1.9

1.7

3.4

3.4

3.3 0 0

3.4 0

3.3

3.3

3.4

3.4

3.4

2.2 4.9

2.2 2.1

3.4

2.2 2.1

2.2

1.5 (1.7)

1.4 (1.7)

01.4 (1.7) 2.1

1.5 (1.7)

0

0.3

3.4

1.5 (1.8) 2.1

1.5 (1.8)

4.9

0

0

0

3.3

2.4

3.5

3.5

1.5

1.5

3.4

2.4

4.9

0

1.8

R16

310

k

0.1C102

0.1C101

(F200)

(F200)

R16

710

k

R16

510

k

0.1C112

10kR106

0.1C107

0.1C111

10k

R10

9

10kR104

100

R10

3

100

R10

5

1kR

107

6.3V1000C264

32

31

30

29

28

27 6

26

25

24

1

2

3

4

5

7

8

9

23

22

21

20

10

11

12

19

18

17

13

14

15

16

BH7868FS-E2IC251

VCC1

S1

S2

CIN

MUTE1

CVBS IN

YC MIX

YIN

BIAS

CLP

CYIN

GND

CB IN

MUTE2

CRIN

VCC2CROUTB

CROUTA

GND

CBOUTB

CBOUTA

GND

CYOUTB

CYOUTA

GND

YOUTB

YOUTA

GND

VOUTB

VOUTA

S-DC OUT

C OUT

6.3V1000C258

6.3V100

C256

6.3V100

C253

75R254

75R253

75R252

75R251

C2523306.3V

0.1C251

0.1C259

16V100C260

10uHL251

16V10C257

50V1C262

1C255

1C254

10kR134

CL107

CL108

CL109

JL302

JL314

1

2

3

4

5

6

7

8

9

CN1029P

L OUT

VCC

R OUT

GND

TUNED

CE

DI

CLK

DO

1

2

3

4

5

6

7

8

9

10

11

CN10111P

RDS CLK

RDS DATA

R221 47k

0.1C207

0.1C213

47kR212

16V10

C210

10V220

C206

16V10

C216 10

11

12

13

14

15

16

17181920212229 28 27 26 25 24 23303132

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

9

8

7

6

5

4

3

2

1

49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

PVDD

RX0

I2C

RX1

RX2

RX3

INT

VOUT

CDTO

LRCKB

BICKB

SDTOB

OLRCKA

ILRCKA

BICKA

SDTOA

MC

KO

TVD

D

DVS

S

DVD

D

XTI

XTOTX

MC

LK2

PDN

CD

TI

CC

LK

CSN

SDTI

A1

SDTI

A2

SDTI

A3

SDTI

B

HVDD

HVSS

HPR

HPL

MUTET

LOUT2

ROUT2

LOUT1

ROUT1

VCOM

AVDD2

AVSS2

LISEL

LOPIN

ROPIN

RISEL

AVSS

1

AVD

D1

LIN

1

RIN

1

LIN

2

RIN

2

LIN

3

RIN

3

LIN

4

RIN

4

LIN

5

RIN

5

LIN

6

RIN

6

PVSS

R

EMIG

FL201

EMIG

FL203

10uHL203

12kR222

0.1C217

16V10

C218

EMIG

FL202

47kR214

0.1C211

47kR215

12.288MHzX201

1C215

50V

0.1C201

10V220

C202

100kR216

33pC204

100kR217

47kR218

0.1C214

0.1C208

47kR213

47kR219

10V220

C209

R220 47k

50V1C219

JL316

JL317

JL318

JL319

JL320

JL335

JL336

JL337

JL338

JL339

4 3 2 1

5 6 7 8

TC7WZ34FK(TE85R)IC273

GN

D

VCC

0R305

0R304

0R303

0R302

0.1C274

JL211

JL212

JL213

JL215

JL216

JL201

JL202

JL203

JL204

JL205

JL206

JL207

6.3V100

C104

6.3V100

C103

100R133

100R132

100R131

100R130

100R129

100R128

100R127

100R126

100R125

100R123

10kR117

JL214

JL301

JL313

JL312

JL311

JL310

JL309

JL308

JL307

JL306

JL305

JL304

JL303

0R202

0R201

0R

208

0R

207

0R

206

0R

205

0R

209

JL271

JL272

JL273

JL274

JL275

JL276

JL277

JL278

JL279

R3060

R3070

JL280

JL281

100

R16

9

JL251

JL252

JL253

JL254

JL255

JL256

JL257

JL258

JL259

JL260

JL261

JL262

JL230

JL229

JL228

JL227

JL226

JL225

JL224

JL223

JL222

JL32

1

JL32

2

JL32

3

JL32

4

JL32

5

JL32

6

JL32

7

JL32

8

JL32

9

JL33

0

JL33

1

JL33

2

JL33

3

JL33

40

R32

8

0R

327

0R

326

0R

325

0R

324

0R

323

0R

322

0R

321

100

R14

5

100

R14

6

100

R14

7

100

R14

8

100

R15

0

100

R15

1

100

R15

2

100

R15

3

100

R11

0

0R320

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

19PCN105

DSE

L

CR

/R

WID

E

CB/

B

D-G

ND

Y/G

D-G

ND Y

D-G

ND C

D-G

ND

DM

VID

EO

VGN

D

DM

_TXD

DM

_RXD

DET

A/D

DM

_L

AGN

D

DM

_R

0.1C263

16V10C261

100

R11

4

100

R11

2

JL221

100R121

10kR122

100

R11

8

JL236

JL235

JL234

JL233

JL232

JL231

10MHzX101

CL301

CL110

CL111

CL112

CL113

CL114

JL209

10k

R11

3

100kR135

10k

R14

9

10kR141

R14

210

0

100

R14

0

100

R13

9

100

R13

8

100

R13

7

100

R13

6

R168100

R1580

R1590

EMIG FL272

10k

R16

0

0R

204

10uHL301

16V100

C302

0.1C301

10uHL202

16V10

C212

10uHL201

0R203CL201

0R

108

CL1

01

CL1

02

0.1C203

50V1C220

50V1C221

50V1

C222

FB203

FB202

JL208

10V47

C224

0.1C223

100R161

100

R10

1

100

R10

2

100

R15

7

CL104

CL1

03

4.7kR115

4.7kR116

CL106

CL105

0R223

0R224

50V1C225

50V1C226

10kR170

C3050.022

C3040.022

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

15PCN106

USB_SW

USB_OCD

OCSW1/GND

XSYSRST

P_CONT_HDMI

XIFCS

XIFBSY

IFSDI

IFSDO

E3.3V

IFSCK

DGND

SPDIF

CEC_TX_OUT

CEC_RX_IN

JL264

JL263

USB_OCD

USB_SW

E4V

CY

DGND

DGND

TV_R

DGND

TV_L

SAT/CABLE_OPT

DGND

A9V

D3.3V

CB/PB

DGND

DGND

DGND

DGND

CVBS

CR/PR

SAT/CABLE_COAX

TV_OPT

MIC

DGND

MIC_SW

A9V

DGND

P_CONT1

P_CONT_FL

D5V

D3.3V

FL5V

DGND

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN103

E3.3V

SIRCS1

DGND

FL_RST

FL_CLK

FL_CS

FL_DATA

FL5V

DGND

KEY2

KEY1

KEY0

ILUMI

LED_9V

LED3

LED2

LED1

100

R11

9

100R120

1MR171

10987654321 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

515253545556575859606162636465666768697071727374757677787980

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

R5F3640DDFARIC101

SYS_

RXD

SYS_

CLK

CEC

_RX_

IN

SIR

CS_

IN

CO

DEC

_DO

CO

DEC

_DI

CO

DEC

_CLK

BYTE

CN

VSS

CO

DEC

_PD

N

CO

DEC

_CS

RES

ET

XOU

T

VSS

XIN

VCC

1

NM

I

CO

DEC

_IN

T

DO

UT_

MU

TE

CEC

_TX_

OU

T

VID

EO_M

UTE

0

V_SE

L

BAC

KLIG

HT_

LED

DM

PORT

_DET

VID

EO_M

UTE

1I2

C_C

LKI2

C_D

ATA

DMPORT_TX_OUTDMPORT_RX_IN

CLK1

RTS1

DVD_SID

DVD_SOD

DVD_SCO

SYS_WAKEUP

EPM

P_CONT_HDMI

P_CONT1

FLASH_CE

P_CONT_FL

LED

_1

LED

_2

LED

_3

STBY

_LED

VCC

2

VSS

FL_R

ESET

FL_C

LK

FL_D

_OU

T

FL_C

S

CD

M_O

PEN

MTK

_RST

DVD

_XIF

CS

DVD

_XIF

BUSY

KEY_

INT

RD

S_C

LK

TUN

ED

ST_D

I

ST_C

LK

ST_D

O

ST_C

E

RDS_DATA

TEST1

TEST2

TEST3

TEST4

TEST5

MIC_SW

KEY0

KEY1

KEY2

AVSS

SYS_BUSY

VREF

AVCC

SYS_TXD

75R301

D_OUT

(F200)

(F200: AEP, UK)

F500: CND, E3, E15, E32, EA,MX, SP, TW, TH, AUS

(F500: RU)

(F200: SP, TH)

6.3V47

C281

6.3V47

C278

1kR274

1kR275

68R278 10k

R281

2SC3052EF-T1-LEFBUFFER

Q271

220R276

D5V

R2790

R2800

100

R14

3

1kR282

MA2J1110GLS0D102

1

2

3

4

5

6

7

8

9

9PCN110

DGND

TXD1

RTS1

VCC1

CLK1

RXD1

CNVSS

RESET

DGND

100R111

C2820.01

3

2

1

4

5

TC7SZ08FU(TE85R)IC281

A

B

VSS Y

VDD

D3.3V

1kR210

39pC205

RB501V-40TE-17D301

1

2

3

4

5

6

7

8

9

10

10PCN107

SPDIF(DVD)

GND

EVER +4V

SYS_WAKEUP

SYS_CLK

SYS_TXD

SYS_RXD

SYS_BUSY

CABLE_DETECT

RESET

CO

DEC

_IN

T

CO

DEC

_DO

CO

DEC

_CLK

CODEC_INT

CODEC_DI

CO

DEC

_PD

N

CO

DEC

_DO

CO

DEC

_CLK

CO

DEC

_CS

ST_DI

ST_DO

RDS_CLK

RDS_DATA

VID

E0_M

UTE

0

V_SE

L

V_SE

L

VID

E0_M

UTE

0

CEC_RX_IN

CEC_TX_OUT

DVD_SCO

DVD_SOD

DVD_SI D

DVD_XIFBUSY

DVD_XIFCS

MTK_RST

CDM_OPEN

DVD_SCO

DVD_SOD

DVD_SID

MTK

_RST

DVD

_XIF

CS

DVD

_XIF

BUSY

CEC

_TX_

OU

T

FL_C

S

FL_D

_OU

T

FL_C

LK

FL_R

ESET

DM

PORT

_RX_

IN

DM

PORT

_DET

DM

PORT

_TX_

OU

T

CEC

_RX_

IN

TUNED

ST_CLK

RD

S_C

LK

TUN

ED

ST_D

I

ST_C

LK

ST_D

O

ST_C

E

RD

S_D

ATA

VID

E0_M

UTE

1

CO

DEC

_PD

N

CO

DEC

_CS

DMPORT_TX_OUT

CO

DEC

_DI

FL_D_OUT

FL_CS

FL_CLK

FL_RESET

KEY0

KEY1

KEY2

BACKLIGHT_LED

LED

3

LED

2

LED

1

LED2

LED1

LED3

BAC

KLIG

HT_

LED

DMPORT_RX_I N

CD

M_O

PEN

DM

PORT

_DET

KEY0

KEY1

KEY2

VID

E0_M

UTE

1

ST_CE

R394 0

(F500: KR)R395 0

R393 0

R391 0

R392 0

LEVEL SHIFT

IC273

SYSTEM CONTROLLER

IC101

IC281MUTING

(2/3)MAIN BOARD

VIDEO AMP,95Ω DRIVER

IC251

AK4683EQIC201

A/D CONVERTER,D/A CONVERTER

IC201

(NC)

COAXIALFM 75

TUNER(FM)

ANTENNA

F500: RU, KRF200: AEP, UK/

F500: RU, KRF200: AEP, UK/

F500: RUF200: AEP, UK/


F500: RUF200: AEP, UK/EXCEPT

(F500)



J

4

B

166 219 11

D

N

15

H

L

10

K

173 5 12

C

F

18

M

1 19

E

8

G

20 2214

A

2 13

I

7

T0SA-WSF200/

WSF500



(Page 44)

(Page 44)

(Page 36)

(Page 42)

(Page 42)

(Page 44)

(Page 42)

(Page 38)

(Page 45)

Ver. 1.1

HCD-F200/F500

HCD-F200/F500

4444

6-15. SCHEMATIC DIAGRAM - MAIN Board (3/3) -

MAINBOARD

5(2/3)

MAINBOARD6 (2/3)

MAINBOARD

4(2/3)

4.6

4.5

4.6

9

0

2.7

3.2

9

3.3

0.1

3.3

0.1

VCC

OUT

GND

TORX147LIC901

(F200)

(F500)

1

3

2

R9021k

R9031k

R908100k

R909100k

R90475

R9010

C9020.1

8765

4 3 2 1

IC90

2N

JM45

58v-

TE2R

907

2.2k

R914 22k

R9121.8k

R9131k

R91

010

0k

R911470

R917100

R916 27k

R9184.7K

R91

94.

7k

C90

710

0p

C90

30.

1

C90847

C90647

4V4V

C90910

16V

C91522

10V

C91

32.

210

V

C91

047

C9120.1

R9060

J904

Q9012SC3052EF-T1-LEF MIC CONTROL

C91

1

VCC

GN

D

120p

R915 470

VCC

OUT

GND

TORX147LIC941

1

3

2

C9420.1

R941 0

R9460

TV_L

CR/PR

DGND

DGND

DGND

DGND

DGND

DGND

DGND

DGND

DGND

TV_R

CY

CB/PB

CVBS

MIC

A9V

MIC_SW

SAT/CABLE_COAX

D3.3V

SAT/CABLE_OPT

TV_OPT

D_OUT

(F200)

2PJ906

1PJ907

C904220p

C905220p

C91

40.

1

100kR920

100kR921

100kR922

100kR923

(3/3)MAIN BOARD

IC941OPTICAL RECEIVER

OPTICAL RECEIVERIC901

MIC AMP

IC902

COMPONENTY

VIDEO OUT

VIDEOVIDEO OUT

COMPONENTPr/Cr

VIDEO OUT

COAXIALDIGITAL OUT

DIGITAL INCOAXIAL

SAT/CABLE

DIGITAL INCOAXIAL

SAT/CABLE

DIGITAL INOPTICAL

SAT/CABLE

DIGITAL INOPTICAL

TV

AUDIO INR

TV

COMPONENTPb/Cb

VIDEO OUT

AUDIO INL

TV

ECM-AC2

2PJ903

(F500)

4

B

6

D

H

3 5

C

F

1

E

G

A

2 7

(Page 43)

(Page 43)

(Page 43)

HCD-F200/F500

HCD-F200/F500

4545

6-16. PRINTED WIRING BOARD - CENTER Board -• : Uses unleaded solder.• See page 33 for Circuit Boards Location.

6-17. SCHEMATIC DIAGRAM - CENTER Board -

CN806FL

BOARD

F

CN103

E(2/3)

BOARDMAIN

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN851

E3.3V

SIRCS1

DGND

FL_RST

FL_CLK

FL_CS

FL_DATA

FL5V

DGND

KEY2

KEY1

KEY0

ILUMI

LED_9V

LED3

LED2

LED1

JL855

JL862

JL865

JL858

JL860

JL857

JL853

JL852

JL851

JL864

JL863

JL859

JL867

JL866

JL861

JL856

JL854

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN852

LED1

LED2

LED3

LED_9V

ILUMI

KEY0

KEY1

KEY2

DGND

FL5V

FL_DATA

FL_CS

FL_CLK

FL_RST

DGND

SIRCS1

E3.3V

CENTER BOARD

4

B

3

C

1

A

2

JL851

JL85

2

JL853

JL85

4

JL855

JL85

6

JL857

JL85

8

JL859

JL86

0

JL861

JL86

2

JL863

JL86

4 JL865

JL86

6

JL867

1 17

1216

17

CN851

CN85

21-876-012-

11

(11)

1-876-012-

11

(11)

CENTER BOARD (SIDE A)

CENTER BOARD (SIDE B)

EMAIN

BOARDCN103

F FL BOARDCN806

A

B

C

1 2 3

(Page 46)

(Page 40)

(Page 47) (Page 43)

HCD-F200/F500

HCD-F200/F500

4646

6-18. PRINTED WIRING BOARD - FL Board - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

1

33

32

64

BE

R804

R805

R806

R807

R808

R809

R810

R811

R812

R813

R814R815

R818

R821

R822

R825

R826

R827

R828

R829

R830

R831

C801

C808

JL801

JL802JL803

JL804

JL805

C821

JL806

JL807

C823

JL808 JL809

C825 C8

26

C827

C828

C829

JL810JL811

JL812

JL813

JL814

C830

JL815

C831

JL816

JL817

JL818

JL819 JL820

JL821JL822

JL823

JL824

JL825

C841

JL826

D801

D802

D803

D804

D805

IC802

IRM1

IRM2Q802

Q821

1

17

7

112

1 3

C1

C2

B2E

B1

5

4

1

3

1 2 4 51 5453

R801

R819

CN80

6CN

807

CN808

C802 C805

C809

C822 C824

C832C837

C839 C8

40

C843

S821S822S831S832S833S834

IC801

D821A K A K A K

IC80

3

D823 D825

Q801

L801

L802

BE

ND801

T801

FLUORESCENT INDICATOR TUBE

FL BOARD (COMPONENT SIDE) FL BOARD (CONDUCTOR SIDE)

DC/DC CONVERTER

19

HKEY-R

BOARDCN881

FUNCTION

S831 – 834S821, 822

1-875-965-

11

(11)1-875-965-

11

(11)

GKEY-L

BOARDCN871

FCENTERBOARDCN851

A

B

C

D

E

F

1 2 3 4 5 6 7 8 9 10 11 12 13

D821, 823, 825(FRONT PANEL BUTTON ILLUMINATION)

D821, 823, 825

A K

Ref. No. Location


D801 C-8 D802 C-9 D803 C-8 D804 C-8 D805 C-8 D821 D-3 D823 D-4 D825 D-4 IC801 C-10 IC802 B-11 IC803 C-4 Q801 C-5 Q802 C-10 Q821 D-12

(Page 45)

(Page 48) (Page 48)

HCD-F200/F500

HCD-F200/F500

4747

6-19. SCHEMATIC DIAGRAM - FL Board - • See page 49 for Waveforms. • See page 50 for IC Block Diagrams.

CN851BOARDCENTER

F

KEY-LBOARDCN871

G

KEY-RBOARD

HCN881

21

22

IC B/D

-22.

3-2

2.3

-12.

7-2

4.7

-19.

9-1

0.3

-15.

1-1

2.7

-12.

7-2

2.3

-22.

3-2

2.3

-22.

4-2

4.7

-22.

4-1

2.7

-22.

4-1

5.1

-22.

4-1

5.1

-22.

4-1

7.5

-22.

4-1

9.9

-22.

4-1

5.1

-22.

4-1

5.1

-22.

4-1

7.5

-22.

4-1

9.1

-22.

4-2

2.3

-22.

4-1

0.3

-12.

7

-19.

9

-19.

9

-22.

3

-10.

3

-22.

4-1

5.1 -8

1.5

-10.

3

1.4

-10.

3

3.4

-15.

1

3.3

-22.

3

3.4

-24.

6

0 3.3

3.3 -21.1

-22.

4

1.3

3.4

3.3

5.1

3.2

3.3

3.3

0.1

0

4.3

4.3

0

47R

801

100R809

1kR80

5

3.3k

R81

3

100kR806

5650 51 52 53 54 554443 45 46 47 48 49

14 13 12 11 10

38 39 40 41 42

151617181920

37

32

33 34 35 36

212223242531 30 29 262728

57 58 59 60 61 62 63 64

9 8 7 6 5 4 3 2 1ML9

208-

03M

BZ03

BIC

802

P1P2AD2

AD1

S1S2S3S4S5S6S7S8S9S10

S11

S12

S13

S14

S15

S16

S17

S18

S19

S20

S21

S22

S23

S24

S25

S26

S27

S28

S29

S30

S31

S32

S33

S34

S35

G1

G2

G3

G4

G5

G6

G7

G8

G9

G10

G11

G12

G13

G14

G15

G16 VF

L

GN

D

OSC

0

OSC

1

XRST

XCS

CLK

DAT

VDD

2SC3052EF-T1-LEFGRID DRIVE

Q802

100R808

100R810

100R807

JL811

JL807

JL804

JL810

JL809

JL806

JL808

JL805

JL803

R815100

C82

547

p

0.1C823

0.1C821

16V100

C802

0.01

C83

1

0.01C827

0.022C808

16V100

C805

CPH5504-TL-EOSC

Q801

1

2

34

5

33kR811

100R814

16V

100

C83

2

100pC830

100p

C82

9

2200

pC

828

0.01

C82

6

10k

R81

2

50V

C82422

0.01C801

3

2

1 5

4

TK11133CSCL-GIC803

V_CONT

GND

NP V_OUT

V_IN

100kR819

0.01C840

JL802

JL801

0.1C841

50V22

C822

10uHL802

16V100

C843

2

3

5

6

8

7

1

4 9

DC/DC CONVERTERT801

RT1N237M-TP-1LED DRIVE

Q821

S832S822

2.2kR828

S834

1kR825

2.2kR829

S833

JL812

JL813

JL814

JL815

JL820

JL821

JL822

JL823

JL824

JL818

JL819

JL816

JL817

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN806

LED1

LED2

LED3

LED_9V

ILUMI

KEY0

KEY1

KEY2

DGND

FL5V

FL_DATA

FL_CS

FL_CLK

FL_RST

DGND

SIRCS1

E3.3V

47uHL801

MA2J1110GLS0D802

MA2J1110GLS0D803

MA2J1110GLS0D804

MA2J1110GLS0D801

1kR827

1 10 11 12 14 19181713 16 2015 23 24 2721 28262522 31 33 3530 32 363429 42 44434037 3938 41 46 484745 5149 50 544 5 6 7 8 92 53

ND801

S831

2.2kR826

1

2

3

4

5

6

7

7PCN807

DGND

KEY-POWER

DGND

LED_9V

LED_1

LED_2

LED_3JL826

JL825

1

2

2PCN808

DGND

KEY21

C837

1C

839

MAZ8062GMLS0D805

VCC

OUT

GND

NJL22H400BIC801

1

3

2

4

5

470R830

470R818

470R831

470R822

470R821

NSSW100BTD823

NSSW100BTD825

NSSW100BTD821

D821,823,825(FRONT PANEL BUTTON ILLUMINATION)

2.2kR804

P31

P32

P33

P34

P35

P36

P37

G1

G2

P21

P22

P23

P24

P25

P26

P27

P28

P29

P30

P2P3P4P5P6P7P8P9P10

P11

P12

P13

P14

P15

P16

P17

P18

P19

P20

G3

G4

G5

G6

G7

G8

G9

G10

G11

P2P3P4P5P6P7P8P9P10

P11

P12

P13

P14

P15

P16

P17

P18

P19

P20

P21

P22

P23

P24

P25

P26

P27

P28

P29

P30

P31

P32

P33

P34

P35

P36

P37

G2

G3

G4

G5

G6

G7

G8

G9

G10

P1

P1

G11G

1

FLUORESCENT INDICATORTUBE DRIVER

IC802

FL BOARD FLUORESCENT INDICATOR TUBE


FUNCTION

IC801REMOTE CONTROL RECEIVER

S821

IC B/D

4

B

6 9 11

D

H

103 5 12

C

F

1

E

8

G

14

A

2 13

I

7

(Page 45)

(Page 49)

(Page 49)

HCD-F200/F500

HCD-F200/F500

4848

6-20. PRINTED WIRING BOARDS - KEY Section - • : Uses unleaded solder.• See page 33 for Circuit Boards Location.

B EB E Q871Q872 R871

R872CL871

CL872CL873

CL874CL875

CL876CL877

7

1

CN87

1

S871

D873

12

CN881

S881 S882 S883

R881

R882

CL881CL882

D871 A K A K

1-875-966-

11

(11)

KEY-L BOARD (COMPONENT SIDE) KEY-L BOARD (CONDUCTOR SIDE)

1-875-966-

11

(11)

GFL BOARD

CN807

WIDE STAGE

D.C.S

A

B

C

D

E

1 2 3 4 5 6 7 8 9 10

1-875-967-

11

(11)1-875-967-

11

(11)

KEY-R BOARD (COMPONENT SIDE) KEY-R BOARD (CONDUCTOR SIDE)

S881 - 883, 871

+– VOL

A. F. D STD

AUTO(F200)

(F500)

(F200)

(F500)

HFL

BOARDCN808

D871, 873

A K

(Page 46)

(Page 46)

HCD-F200/F500

HCD-F200/F500

4949

6-21. SCHEMATIC DIAGRAM - KEY Section -

GCN807

FLBOARD

FLBOARD

HCN808

3.2

0

0

6.7

S871

RT1N237M-TP-1Q871

CL871

RT1N237M-TP-1LED DRIVE LED DRIVE

Q872

CL872

CL873

CL874

CL875

CL-197HB1-D-TD871

(F200)

(F500)

CL-197HB1-D-TD873

1

2

3

4

5

6

7

7PCN871

LED_3

LED_2

LED_1

LED_9V

DGND

KEY-POWER

DGNDCL876

CL877

1kR872

1kR871

KEY-L BOARD

/

A.F.D STD

AUTO(F200)

(F500)

WIDE STAGE

D.C.S.

S881

S8821k

R881

CL881

CL882

2.2kR882

S883

1

2

2PCN881

DGND

KEY2

VOL –

VOL +

KEY-R BOARD

4

B

D

3 5

C

1

E

A

2

(Page 47)

(Page 47)

• Waveforms

– DMB-FIT Board –IC101

(Color bar)

(Color bar)

(R/Cr/Pr)

(Color bar)

(Color bar)

(Color bar)

H0.8 Vp-p

(Y/G)

H1.1 Vp-p

IC101

500 mV/DIV, 1 ms/DIV

(XTALO)

500 mV/DIV, 20 µs/DIV

IC251 , (CROUT)

, (CBOUT)

, (CYOUT)

, (VOUT)

H1.48 Vp-p

1 V/DIV, 50 µs/DIV

IC101 (B/Cb/Pb)

H0.8 Vp-p



IC101 (C)

IC101 (Y)


IC101

H1 Vp-p


(Color bar)

(Color bar)

(Color bar)

(Color bar)

IC251

H1.48 Vp-p

1 V/DIV, 50 µs/DIV

IC251

H2.16 Vp-p

2 V/DIV, 50 µs/DIV

1.22 ms1.42 Vp-p

IC201

2 V/DIV, 50 ns/DIV

(XTO)

81.5 ns4.56 Vp-p

0.9 Vp-p

IC251

2 V/DIV, 50 µs/DIV

H2.56 Vp-p

2 V/DIV, 100 ns/DIV

100 ns2.88 Vp-p

IC101 (XOUT)

IC802 (OSC1)

2 V/DIV, 200 ns/DIV

634 ns3.68 Vp-p

T801

5 V/DIV, 2 µs/DIV

6.72 µs15.6 Vp-p

– MAIN Board – – FL Board –

HCD-F200/F500

HCD-F200/F500

5050

• IC Block Diagrams

– DMB-FIT Board –IC105, 107, 708 TK11133CSCL-GIC707 TK11150CSCL-G

CONTROLCIRCUIT

BANDGAPREFERENCE

+–

OVER HEAT &OVER CURRENT

PROTECTION

1

VCON

T

3

NP

2

GND

4

VOUT

5

VIN

123456

7

PVDDRX0I2C

RX1RX2RX3

INT8VOUT

9

1011

131415

CDTO

LRCKBBICKB

SDTOB

OLRCKAILRCKA

12

BICKA

16SDTOA

17 18 19 20 23

MCKO TX

DVDD

DVSS

TVDD

21 22

XTOXT

I

24

MCLK

2

25

PDN

OSCILLATOR

26 27 28

CSN

CCLK

CDTI

29 30 31

SDTI

A3SD

TIA2

SDTI

A1

32

SDTI

B

HEAD

PHON

EAM

P

39

38

37

36

35

34

ROUT2

LOUT2

MUTET

HPL

HPR

HVSS33 HVDD

41

40

ROUT1

LOUT1

48

45

4746

4443

RISEL

ROPINLOPIN

LISEL

AVSS2AVDD2

42 VCOM

LOW

-PAS

S FI

LTER

DIGI

TAL V

OLUM

E

RIN6

62

LIN6

61 60 59 58 57 56

LIN3

55

RIN2

54

LIN2

53

RIN1

52

LIN1

51

AVDD

1

50

AVSS

1

49

RIN5 LIN

5RI

N4LIN

4RI

N3

R

64

PVSS

63

PRE-AMP

ANALOG DIGITAL CONVERTER

HIGH-PASS FILTER,DIGITAL VOLUME

ANALOG DIGITAL CONVERTERAUDIO INTERFCE

CLOCK RECOVERY

4:2INPUT

SELECTOR

DIGITALAUDIO

INTERFACEDECODER

SERIALCONTROL

INTERFACE

DIGITALAUDIO

TRANSMITTER

DIGI

TAL A

NALO

GCO

NVER

TER

1AU

DIO

INTE

RFAC

E

DIGI

TAL A

NALO

G CO

NVER

TER

DIGI

TAL A

NALO

GCO

NVER

TER

2AU

DIO

INTE

RFAC

E

– MAIN Board –IC201 AK4683EQ

30

1

2

3

29

28

CV OUT

VCC1

6CV IN

5MUTE1

7SEL (CV/MIX)

13PB/B IN

15PR/R IN

14MUTE2

16VCC2

11PY/G IN

12GND

8Y IN

10SEL (BIAS/CLAMP)

4C IN

S1

S2

CV OUT SAG

GND

BIAS 6dB

75Ω

32 C OUT75Ω

31 S-DC OUT

6MHzLPF

27

26

Y OUT

Y OUT SAG

75Ω6MHzLPF

6MHzLPF

S-DC OUTS1/S2

+

25 GND

24

23

PY/G OUT

PY/G OUT SAG

75Ω12MHz

LPF

22 GND

21

20

PB/B OUT

PB/B OUT SAG

75Ω12MHz

LPF

19 GND

18

17

PR/R OUT

PR/R OUT SAG

75Ω12MHz

LPF

CLAMP 6dB

CLAMP 6dB

6dB

9BIAS BIAS

BIAS 6dB

BIAS 6dB

CLAMP

BIAS

MUTE1

MUTE2

H

L

L

H

1VC

TSD

2VIN

3GND

4VOUT

5ADJ

+–

REF

IC251 BH7868FS-E2

IC701 – 706 SI-3010KM-TLS

HCD-F200/F500

51

64 VDD

56 VFL57 GND

1P12P2

63 DA62 CP61 CS

55 COM16

59 OSC158 OSC0

54 COM1553 COM1452 COM1351 COM1250 COM1149 COM1048 COM947 COM846 COM745 COM644 COM543 COM442 COM341 COM240 COM1

39383736353433 SEG29

SEG30SEG31SEG32SEG33SEG34SEG35

60 RESET

8 BIT SHIFTREGISTER

COMMANDDECODERPORT

DRIVER

3AD2

4AD1AD

DRIVER

5SEG16SEG27SEG38SEG49SEG5

10SEG611SEG712SEG813SEG914SEG1015SEG1116SEG1217SEG1318SEG1419SEG1520SEG1621SEG1722SEG1823SEG1924SEG2025SEG2126SEG2227SEG2328SEG2429SEG2530SEG2631SEG2732SEG28

SEGMENTDRIVER

ADRAM16W 2B

CGRAM248W 35B

DCRAM16W 8B

ADDRESSSELECTOR

READADDRESSCOUNTER

WRITEADDRESSCOUNTER

CGRAM8W 35B

CONTROLCIRCUIT

TIMINGGENERATOR1

OSCILLATOR

TIMINGGENERATOR2

DIGITCONTROL

DUTYCONTROL

GRIDDRIVER

CONTROLCIRCUIT

BANDGAPREFERENCE

+–

OVER HEAT &OVER CURRENT

PROTECTION

1

VCON

T

3

NP

2

GND

4

VOUT

5

VIN

– FL Board –IC802 ML9208-03MBZ03B

IC803 TK11133CSCL-G

HCD-F200/F500

52

• IC Pin Function Description

MAIN BOARD IC101 R5F3640DDFAR (SYSTEM CONTROLLER)Pin No. Pin Name I/O Description

1 SYS_RXD O Serial data output to the SYSTEM CONTROL connector (SA-WSF200/F500)

2 SYS_CLK O Serial data transfer clock signal output to the SYSTEM CONTROL connector (SA-WSF200/F500)

3 CEC_RX_IN I CEC serial data input from the HDMI OUT connector4 SIRCS_IN I SIRCS signal input from the remote control receiver5 CODEC_DO O Serial data output to the A/D, D/A converter6 CODEC_DI I Serial data input from the A/D, D/A converter7 CODEC_CLK O Serial data transfer clock signal output to the A/D converter, D/A converter8 BYTE I External data bus width selection signal input terminal Fixed at "L" in this set9 CNVSS I Processor mode switch input terminal10 CODEC_PDN O Reset signal output to the A/D, D/A converter "L": reset11 CODEC_CS O Chip select signal output to the A/D, D/A converter

12 RESET ISystem reset signal input from the SYSTEM CONTROL connector (SA-WSF200/F500) "L": reset For several hundreds msec. after the power supply rises, "L" is input, then it change to "H"

13 XOUT O Main system clock output terminal (10 MHz)14 VSS - Ground terminal15 XIN I Main system clock input terminal (10 MHz)16 VCC1 - Power supply terminal (+3.3V)17 NMI I Non-maskable interrupt input terminal Fixed at "H" in this set18 CODEC_INT I Interrupt signal input from the A/D, D/A converter

19, 20 - - Not used21 DOUT_MUTE O Digital signal on/off control signal output terminal (F200)22 CEC_TX_OUT O CEC serial data output to the HDMI OUT connector23 VIDEO_MUTE 0 O Video signal input selection signal output terminal24 - - Not used25 V_SEL O Video signal input selection signal output terminal26 BACKLIGHT_LED O LED drive signal output terminal27 DMPORT_DET I Connect detection signal input from the DMPORT jack28 VIDEO_MUTE1 O Video signal input selection signal output terminal29 I2C_CLK I/O Two-way I2C clock bus terminal Not used30 I2C_DATA I/O Two-way I2C data bus terminal Not used31 DMPORT_TX_OUT O Serial data output to the DMPORT connector32 DMPORT_RX_IN I Serial data input from the DMPORT connector33 CLK1 - Not used34 RTS1 - Not used35 DVD_SID O Serial data output to the servo DSP36 DVD_SOD I Serial data input from the servo DSP37 DVD_SCO I Serial data transfer clock signal input from the servo DSP38 SYS_WAKEUP O System wake up signal output to the SYSTEM CONTROL connector (SA-WSF200/F500)

39, 40 - - Not used41 EPM - Not used42 - - Not used43 P_CONT_HDMI O HDMI control signal output terminal (F500)44 P_CONT1 O Power on/off control signal output terminal "H": power on45 - - Not used46 FLASH_CE - Not used47 P_CONT_FL O Power on/off control signal output terminal for the front panel section "H": power on

48 to 55 - - Not used56 LED_1 O LED drive signal output terminal57 LED_2 O LED drive signal output terminal58 LED_3 O LED drive signal output terminal Not used59 STBY_LED O LED drive signal output terminal Not used

60, 61 - - Not used

HCD-F200/F500

53

Pin No. Pin Name I/O Description62 VCC2 - Power supply terminal (+3.3V)63 - - Not used64 VSS - Ground terminal65 - - Not used66 FL_RESET O Reset signal output to the fl uorescent indicator tube driver "L": reset67 FL_CLK O Serial data transfer clock signal output to the fl uorescent indicator tube driver68 FL_D_OUT O Serial data output to the LED driver and fl uorescent indicator tube driver69 FL_CS O Chip select signal output to the fl uorescent indicator tube driver70 CDM_OPEN I Disc insert (8/12cm) detect switch input terminal "L": disc insert71 MTK_RST O Reset signal output to the servo DSP and fl ash ROM "L": reset72 DVD_XIFCS I Chip select signal input from the servo DSP73 DVD_XIFBUSY O Busy signal output to the servo DSP74 KEY_INT I Power key wakeup signal input terminal

75 RDS_CLK I RDS serial data transfer clock signal input from the tuner (FM) (F200: AEP and UK models/F500: Russian model)

76 TUNED I Tuning detection signal input from the tuner (FM) "L": tuned77 ST_DI O Serial data output to the tuner (FM)78 ST_CLK O Serial data transfer clock signal output to the tuner (FM)79 ST_DO I Serial data input from the tuner (FM)80 ST_CE O Serial chip enable signal output to the tuner (FM)

81 RDS_DATA I RDS serial data input from the tuner (FM) (F200: AEP and UK models/F500: Russian model)

82 to 86 TEST1 to TEST5 - Not used87 to 91 - - Not used

92 MIC_SW I Audio code detection signal input from the ECM-AC2 jack93 to 95 KEY0 to KEY2 I Front panel key input terminal (A/D input)

96 AVSS - Ground terminal97 SYS_BUSY I Busy signal input from the SYSTEM CONTROL connector (SA-WSF200/F500)98 VREF I Reference voltage (+3.3V) input terminal99 AVCC - Power supply terminal (+3.3V)100 SYS_TXD I Serial data input from the SYSTEM CONTROL connector (SA-WSF200/F500)

HCD-F200/F500

54

DMB-FIT BOARD IC101 CXD9894R (EXCEPT F500: Canadian model), CXD9915R (F500: Canadian model) (RF AMP, SERVO DSP, MPEG DECODER)

Pin No. Pin Name I/O Description1 OSC O RF offset cancellation capacitor connecting terminal2 RFGC O RF AGC loop capacitor connecting for DVD-ROM3 IREF I Reference current input terminal4 AVDD3 - Power supply terminal (+3.3V)5 AGND - Ground terminal6 DVDA I AC coupled input path A7 DVDB I AC coupled input path B8 DVDC I AC coupled input path C9 DVDD I AC coupled input path D10 DVDRF IP I AC coupled DVD RF signal input from the optical pick-up block11 MA I DC coupled main-beam RF signal input A12 MB I DC coupled main-beam RF signal input B13 MC I DC coupled main-beam RF signal input C14 MD I DC coupled main-beam RF signal input D15 SA I DC coupled sub-beam RF signal input A Not used16 SB I DC coupled sub-beam RF signal input B Not used17 TNI I 3 beam satellite PD signal negative input from the optical pick-up block18 TPI I 3 beam satellite PD signal positive input from the optical pick-up block

19, 20 MDI1, MDI2 I Laser power monitor input from the optical pick-up block21 LDO2 O Laser diode drive signal output to the optical pick-up block (for DVD)22 LDO1 O Laser diode drive signal output to the optical pick-up block (for CD)23 SVDD3 - Power supply terminal (+3.3V)24 CSO O Central servo signal output terminal Not used25 RFLVL O RFRP low pass output terminal Not used26 SGND - Ground terminal27 V2REFO O Reference voltage (+2.8V) output terminal28 V2O O Reference voltage (+2V) output to the optical pick-up block29 VREFO O Reference voltage (+1.4V) output terminal30 FEO O Focus error monitor output terminal Not used31 TEO O Tracking error monitor output terminal Not used32 TEZISLV O Slice level of tracking error signal output terminal Not used33 OPOUT O Output from the internal operational amplifi er Not used34 OP_INN I Negative input to the internal operational amplifi er Not used35 OP_INP I Positive input to the internal operational amplifi er Not used36 DMO O Spindle motor control signal output to the motor driver37 FMO O Sled motor control signal output to the motor driver38 TROPENPWM O Loading motor control signal output to the motor driver39 IOPMON I Power monitor terminal40 TRO O Tracking coil control signal output to the coil driver41 FOO O Focus coil control signal output to the coil driver42 AGND18 - Ground terminal43 AVDD18 - Power supply terminal (+1.8V)44 USB_DP I/O Two-way data (positive) bus from the USB connector45 USB_DM I/O Two-way data (negative) bus from the USB connector46 USB_VDD3 - Power supply terminal (+3.3V)47 USB_VSS - Ground terminal48 PAD_VRT - Not used49 USB_VDD18 - Power supply terminal (+1.8V)50 USB_VSS - Ground terminal51 DIR_ERROR O PLL lock error signal and data error fl ag output termnal Not used52 DIR_AUDIO O PCM audio data output termnal Not used53 LIMITSW I Limit detection switch input terminal54 MSW O CD/DVD selection signal output terminal "L": CD, "H": DVD

HCD-F200/F500

55

Pin No. Pin Name I/O Description55 DVDD18 - Power supply terminal (+1.8V)

56 to 64 HA2 to HA8, HA18, HA19 O Address signal output to the fl ash ROM

65 DVDD3 - Power supply terminal (+3.3V)66 XWR O Write enable signal output to the fl ash ROM

67 to 75 HA16 to HA9, HA20 O Address signal output to the fl ash ROM76 XROMCS O Chip select signal output to the fl ash ROM77 HA1 O Address signal output to the fl ash ROM78 XRD O Read enable signal output to the fl ash ROM

79, 80 HD0, HD1 I/O Two-way data bus terminal with the fl ash ROM81 DVSS - Ground terminal

82 to 86 HD2 to HD6 I/O Two-way data bus terminal with the fl ash ROM87 HA21 O Address signal output to the fl ash ROM88 RESERVED - Not used89 HD7 I/O Two-way data bus terminal with the fl ash ROM90 DVSS - Ground terminal

91, 92 HA17, HA0 O Address signal output to the fl ash ROM93 DVDD18 - Power supply terminal (+1.8V)94 FWD O Loading motor drive signal output terminal (forward direction)95 REV O Loading motor drive signal output terminal (reverse direction)96 DVDD3 - Power supply terminal (+3.3V)97 IFSDO O Serial data output to the system controller98 IFCK O Serial data transfer clock signal output to the system controller99 xIFCS O Chip select signal output to the system controller100 IFSDI I Serial data input from the system controller101 SCL O Serial data transfer clock signal output to the EEPROM102 SDA I/O Two-way data bus with the EEPROM103 CKSW I Chucking detection switch input terminal104 OCSW I Disc table open/close detection switch input terminal105 RXD I Receive data input terminal for UART communication when data writing to fl ash memory106 TXD O Transmit data output terminal for UART communication when data writing to fl ash memory107 ICE I ICE mode enable signal input terminal Not used108 xSYSRST I Reset signal input from the system controller "L": reset109 RESERVED - Not used110 xIFBSY I Busy signal input from the system controller111 DQM0 O Data mask signal output to the SD-RAM112 EEWP O Write protect signal output to the EEPROM

113 to 117 RD7 to RD3 I/O Two-way data bus with the SD-RAM118 DVDD3 - Power supply terminal (+3.3V)

119 to 129 RD2 to RD0, RD15 to RD8 I/O Two-way data bus with the SD-RAM

130 TSD_M O Thermal shut down signal output to the motor/coil driver131 DVDD3 - Power supply terminal (+3.3V)132 DQM1 O Data mask signal output to the SD-RAM133 RWE O Write enable signal output to the SD-RAM134 CAS O Column address strobe signal output to the SD-RAM135 RAS O Row address strobe signal output to the SD-RAM136 RCS O Chip select signal output to the SD-RAM

137, 138 BA0, BA1 O Bank address signal output to the SD-RAM139 to 141 RA10, RA0, RA1 O Address signal output to the SD-RAM

142 DVDD18 - Power supply terminal (+1.8V)143, 144 RA2, RA3 O Address signal output to the SD-RAM

145 DVDD3 - Power supply terminal (+3.3V)146 DRCLK O Serial data transfer clock signal output to the SD-RAM147 CKE O Clock enable signal output to the SD-RAM148 DVSS - Ground terminal

HCD-F200/F500

56

Pin No. Pin Name I/O Description149 to 155 RA11, RA9 to RA4 O Address signal output to the SD-RAM

156 DVDD3 - Power supply terminal (+3.3V)157 MUTE123 O Muting signal output to the motor/coil driver158 MUTE O Muting signal output to the motor/coil driver159 DDC_DA O Serial data transfer clock signal output terminal160 DVDD18 - Power supply terminal (+1.8V)161 DDC_CLK I/O Two-way data bus with terminal162 HTPLG I HDMI hot-plug detection signal input terminal163 AGND3 - Ground terminal164 EXT_RES - Not used

165, 166 AVDD3 - Power supply terminal (+3.3V)167 EXT_CAP - Not used

168, 169 AGND3, AGND18 - Ground terminal170 TXCN O TMDS clock signal (negative) output to the HDMI OUT connector171 TXCP O TMDS clock signal (positive) output to the HDMI OUT connector172 DVDD18 - Power supply terminal (+1.8V)173 TX0N O TMDS data (negative) output to the HDMI OUT connector174 TX0P O TMDS data (positive) output to the HDMI OUT connector175 DVDD18 - Power supply terminal (+1.8V)176 TX1N O TMDS data (negative) output to the HDMI OUT connector177 TX1P O TMDS data (positive) output to the HDMI OUT connector178 DVDD18 - Power supply terminal (+1.8V)179 TX2N O TMDS data (negative) output to the HDMI OUT connector180 TX2P O TMDS data (positive) output to the HDMI OUT connector181 AGND18 - Ground terminal

182, 183 R/Cr/Pr, B/Cb/Pb O Component video signal output to the video amplifi er184 DACVSSA - Ground terminal185 Y/G O Component video signal output to the video amplifi er186 DACVDDA - Power supply terminal (+3.3V)187 CVBS O Video signal output to the video amplifi er Not used188 DACVSSB - Ground terminal189 C O Chroma signal output to the video amplifi er190 DACVDDB - Power supply terminal (+3.3V)191 Y O Y signal output to the video amplifi er192 DACVSSC - Ground terminal193 FS - Full scale adjustment terminal194 VREF - For reference voltage terminal195 DACVDDC - Power supply terminal (+3.3V)196 VBUS_OE O VBUS control signal output terminal197 VBUS_OC I VBUS control signal input terminal198 SCORE/DIR_XSTATE I Source clock switching monitor input terminal Not used199 SPMCK O Master clock signal output terminal Not used200 SPBCK O Bit clock signal output terminal Not used201 SPLRCK O L/R sampling clock signal output terminal Not used202 SPDATA I Audio serial data input terminal Not used203 ACLK O Master clock signal output terminal Not used204 ABCK O Bit clock signal output terminal Not used205 ALRCK O L/R sampling clock signal output terminal Not used206 MC_DATA/ADIN I Audio serial data input terminal Not used207 DVDD3 - Power supply terminal (+3.3V)208 MIC - Not used209 WIDE O Normal/squeeze selection signal outputterminal Not used210 REG_SEL/DSEL - Not used211 TRG_SW I Trigger detection switch input terminal Not used212 DVDD18 - Power supply terminal (+1.8V)213 KMOD - Not used

HCD-F200/F500

57

Pin No. Pin Name I/O Description214 XVOICE/DIR_CSFCAG I Detection of MIC signal input terminal Not used215 SPDIF O SPDIF digital audio signal output to the A/D converter, D/A converter216 APLLVDD3 - Power supply terminal (+3.3V)217 APLLCAP - Connection terminal for an external capacitor218 APLLVSS - Ground terminal

219, 220 ADACVSS2, ADACVSS1 - Ground terminal

221 DIR_CE - Not used222, 223 ASDATA3, ASDATA2 O Audio serial data output terminal Not used

224 AVCM - Not used225, 226 ASDATA1, ASDATA0 O Audio serial data output terminal Not used

227 DIR_CL - Not used

228, 229 ADACVDD1, ADACVDD2 - Power supply terminal (+3.3V)

230 LI/DIR_DI I Serial data input terminal Not used231 RI/DIR_DO O Serial data output terminal Not used232 ADACVSS1 - Ground terminal233 ADACVDD1 - Power supply terminal (+3.3V)234 SADCVDD18 - Power supply terminal (+1.8V)235 SADCVSS18 - Ground terminal236 RFGND18 - Ground terminal237 RFVDD18 - Power supply terminal (+1.8V)238 XTALO O System clock output terminal (27 MHz)239 XTALI I System clock input terminal (27 MHz)240 JITFO O Output terminal of the RF jitter meter241 JITFN I Input terminal of the RF jitter meter242 PLLVSS - Ground terminal243 PLLVDD3 - Power supply terminal (+3.3V)244 LPFON O Data PLL loop fi lter output terminal245 LPFIP I Data PLL loop fi lter input terminal246 LPFIN I Data PLL loop fi lter input terminal247 LPFOP O Data PLL loop fi lter output terminal248 ADCVDD3 - Power supply terminal (+3.3V)249 ADCVSS - Ground terminal250 RFVDD3 - Power supply terminal (+3.3V)251 RFRPDC O RF ripple detect output terminal252 RFRPAC I RF ripple detect input terminal253 HRFZC I High frequency RF ripple zero crossing terminal254 CRTPLP O Defect level fi lter capacitor connecting terminal255 RFGND18 - Ground terminal256 OSP O RF offset cancellation capacitor connecting terminal

58

HCD-F200/F500

1

2

43

8 5

6

7not supplied

notsupplied

not supplied

not supplied

#1

#2

#2

#6#7

#7

#8

#2

#3

not supplied

front panel sectionnotsupplied

not supplied

3

9

SECTION 7EXPLODED VIEWS

1 4-225-252-01 CUSHION (FOOT) 2 3-291-160-01 PANEL (STAND-TOP) 3 4-302-555-01 BAND, BEADS WIRE 4 3-291-137-02 COVER (SYS) 5 3-291-136-02 COVER (REAR-HCD)

6 3-294-314-01 LABEL (CONNECTION) (F200) 6 3-294-315-01 LABEL (CONNECTION) (F500) 7 3-291-138-01 COVER (TERMINAL-HCD) 8 3-291-159-01 SHEET (HOLE)

9 4-900-386-01 SCREW

#1 7-682-561-09 SCREW +B 4X8 #2 7-685-645-79 SCREW +BVTP 3X6 TYPE2 IT-3 #3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 #6 7-685-232-19 SCREW +KTP 2.6X5 TYPE2 NON-SLIT #7 7-682-247-09 SCREW +K 3X6

#8 7-685-872-09 SCREW +BVTT 3X8 (S)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

Note:• -XX and -X mean standardized parts, so

they may have some difference from the original one.

• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not sup-plied.

• Color Indication of Appearance Parts Ex-ample:

KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ Parts Color Cabinet’s Color

• Abbreviation AUS : Australian model CND : Canadian model E3 : 240V AC area in E model E15 : Iranian model E32 : Latin American model (110 – 240V AC area) EA : Saudi Arabia model KR : Korean model MX : Mexican model RU : Russian model SP : Singapore model TH : Thai model TW : Taiwan model

7-1. REAR COVER SECTION

Note: This illustration is seen from the back.

The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety.Replace only with part number specifi ed.

Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifi é.

The components identifi ed by mark 9 con-tain confi dential information.Strictly follow the instructions whenever the components are repaired and/or replaced.

Les composants identifi és par la marque 9 contiennent des informations confi den-tielles.Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé.

Ver. 1.1

59

HCD-F200/F500

7-2. FRONT PANEL SECTION

Note: This illustration is seen from the back.

51 3-087-053-01 +BVTP2.6 (3CR) 52 1-828-295-11 WIRE (FLAT TYPE) (7 CORE) 53 1-828-002-11 WIRE (FLAT TYPE) (17 CORE) 54 A-1497-847-A FL BOARD, COMPLETE 55 3-291-132-01 BUTTON (EJECT)

56 3-291-130-01 BUTTON (PLAY) 57 3-291-131-01 BUTTON (POWER)

58 A-1547-635-A FRONT PANEL ASSY (SERVICE) (F200) 58 A-1547-647-A PANEL ASSY, FRONT (SERVICE) (F500: CND) 58 A-1547-648-A PANEL ASSY, FRONT (SERVICE) (F500: RU, E3,

E15, E32, EA, MX, SP, TW, KR, TH, AUS)

#2 7-685-645-79 SCREW +BVTP 3X6 TYPE2 IT-3 #3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3


51

51

not supplied notsupplied

notsupplied

not suppliednot supplied(USB board)

not supplied(KEY-L board)

not supplied(KEY-R board)

not supplied

not supplied

#2#2

#3

#3

notsupplied

not supplied

main section

not suppliednot supplied

not supplied

not supplied

#2

51

5655

57

51

5152

53

5451

51

58

Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

Ver. 1.1

60

HCD-F200/F500

7-3. MAIN SECTION

101 A-1497-844-A MAIN BOARD, COMPLETE (F200: AEP, UK) 101 A-1497-860-A MAIN BOARD, COMPLETE (F200: SP, TH) 101 A-1497-869-A MAIN BOARD, COMPLETE (F500: RU) 101 A-1497-875-A MAIN BOARD, COMPLETE (F500: CND, E3, E15,

E32, EA, MX, SP, TW, TH, AUS) 101 A-1498-991-A MAIN BOARD, COMPLETE (F500: KR)

102 1-828-954-11 WIRE (FLAT TYPE) (9 CORE) (F200: SP, TH/F500: CND, E3, E15, E32, EA, MX, SP, TW, KR, TH, AUS)

102 1-828-964-11 WIRE (FLAT TYPE) (11 CORE) (F200: AEP, UK/F500: RU)

103 1-693-768-11 TUNER (FM) (F200: AEP, UK/F500: RU) 103 1-693-769-11 TUNER (FM) (F200: SP, TH/F500: E3, E15, E32,

EA, MX, SP, TW, TH, AUS)

103 1-693-770-11 TUNER (FM) (F500: CND) 103 1-693-771-11 TUNER (FM) (F500: KR) #2 7-685-645-79 SCREW +BVTP 3X6 TYPE2 IT-3 #3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 #4 7-685-872-01 SCREW +BVTT 3X8 (S)


101102

103

not supplied#2

#4

#3

#4

#2

#2

#2

#2

#2

not supplied

not supplied

chassis section


Ver. 1.1

61

HCD-F200/F500

7-4. CHASSIS SECTION

151 1-828-298-11 WIRE (FLAT TYPE) (7 CORE) 152 1-828-341-11 WIRE (FLAT TYPE) (15 CORE) 153 1-828-360-11 WIRE (FLAT TYPE) (19 CORE)9 154 A-1545-114-A DMB-FIT BOARD, COMPLETE (for SERVICE)

(F200: AEP, UK)9 154 A-1545-115-A DMB-FIT BOARD, COMPLETE (for SERVICE)

(F200: SP, TH)

9 154 A-1545-116-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: RU)

9 154 A-1545-117-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: CND)

9 154 A-1545-118-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: SP, TW, TH)

9 154 A-1545-120-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: KR)

9 154 A-1545-121-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: E3, E15, EA)

9 154 A-1545-122-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: AUS)

9 154 A-1545-123-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: E32)

9 154 A-1545-124-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: MX)

155 1-828-347-11 WIRE (FLAT TYPE) (17 CORE) 156 1-833-994-21 CABLE, SYSTEM

157 4-225-252-01 CUSHION (FOOT) 158 3-087-053-01 +BVTP2.6 (3CR) 159 1-828-253-51 WIRE (FLAT TYPE) (24 CORE) 160 A-1547-636-A PANEL (SLOT) ASSY (SERVICE) #2 7-685-645-79 SCREW +BVTP 3X6 TYPE2 IT-3

#3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3


156

158

157

160

159

151

153

154

155

152 not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

#2

#2

#3

#2

#2

#2

#2

#3

#2

not supplied(CENTER board)

DVD mechanism deck section-1


Ver. 1.1

62

HCD-F200/F500

7-5. DVD MECHANISM DECK SECTION-1 (CDM86-DVBU101)

251 4-245-639-01 LEVER (CL UP2) 252 3-087-599-01 INSULATOR SCREW 253 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) 254 2-634-618-01 INSULATOR 255 2-023-068-01 TAPPING +B 2.6X8

256 A-1114-646-A MD (AU) ASSY0 257 8-820-322-04 OPTICAL PICK-UP BLOCK (KHM-313CAB/C2RP)

(Including sled motor, spindle motor) 259 2-023-066-01 TAPPING +B 2X6


253253

259

252

252

254

254

257(including sled motor, spindle motor)

254

254

252

not supplied

not supplied

not supplied(spindle motor)

not supplied(sled motor)

DVD mechanism deck section-2

255

256

251

63

HCD-F200/F500

301 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) 302 2-023-648-01 TAPPING +B 2X10 303 4-245-653-01 BELT (MOT) 304 4-245-662-02 PULLEY (GEAR) 305 4-245-646-01 GEAR (IDL-F)

306 4-245-644-01 GEAR (IDL-D)

307 4-245-645-01 GEAR (IDL-E) 308 4-246-203-01 LEVER (RELEASE) 309 4-245-630-01 LEVER (SW) 310 2-023-068-01 TAPPING +B 2.6X8

M001 X-4955-496-1 MOTOR (PULLEY) ASSY (LOADING) #5 7-623-921-01 WASHER 1.7, NYLON



DVD mechanism section-3

310

302

310 310

309

308

301307

306

305

304

303

DVD mechanism section-4

#5

not supplied(MS-214 board)

M001

64

HCD-F200/F500

351 4-245-627-01 WASHER (6-2.7-0.4) 352 4-245-637-11 ROLLER, RUBBER 353 4-245-649-01 GEAR (IDL-I) 354 4-245-657-11 LEVER (LOADING-R) 355 4-245-647-01 GEAR (IDL-G)

356 4-245-648-01 GEAR (IDL-H) 357 4-245-655-01 CHASSIS (TOP) 358 4-245-631-11 SPT-T (LOADING-R) 359 4-245-650-01 GEAR (IDL-J) 360 4-245-651-11 GEAR (IDL-L)

361 4-245-640-01 GEAR (CAP) 362 4-245-632-11 SPR-T (LOADING-L) 363 4-245-656-11 LEVER (LOADING-L) 364 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) 365 4-245-636-01 SPR-T CL DOWN

366 4-245-658-11 LEVER (DISC STOP) 367 4-245-659-11 LEVER (DISC SENSOR) 368 2-023-065-02 LEVER, CL UP 1



351

351

352

352

353

354

357

358359

360

361

not supplied

not supplied

353

363

364

367

not supplied

366

355

365

355

356356

362

368

65

HCD-F200/F500

401 4-245-643-01 GEAR (IDL-C) 402 X-4955-483-1 LEVER (GEAR LOADING) ASSY 403 2-515-536-01 SPRING (DIR), TENSION COIL 404 4-245-642-01 GEAR (IDL-B) 405 4-245-814-01 LEVER (DIR FIRST)

406 2-515-534-01 SPRING (DIR BACK), TENSION COIL 407 4-245-660-11 LEVER (DIR) 408 4-245-641-01 GEAR (IDL-A)

409 4-245-640-01 GEAR (CAP) 410 4-245-628-01 LEVER (BU LOCK)

411 4-248-206-01 WASHER (3-1-0.4) 412 4-245-624-01 LEVER, CLOSE 413 4-245-635-01 SPR-E LEVER CLOSE 414 4-245-629-01 GEAR (BU LOCK) 415 4-245-644-01 GEAR (IDL-D)



not supplied

not supplied

401

402

415

405

403

407

408

409

404

406 411

412

413

414

409

410

66

HCD-F200/F500SECTION 8

ELECTRICAL PARTS LIST

CENTER BOARD *************

< CONNECTOR >

CN851 1-784-869-51 CONNECTOR, FFC (LIF (NON-ZIF)) 17P CN852 1-784-376-51 CONNECTOR, FFC/FPC 17P************************************************************

9 A-1545-114-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F200: AEP, UK)

9 A-1545-115-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F200: SP, TH)

9 A-1545-116-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: RU)

9 A-1545-117-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: CND)

9 A-1545-118-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: SP, TW, TH)

9 A-1545-120-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: KR)

9 A-1545-121-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: E3, E15)

9 A-1545-122-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: AUS)

9 A-1545-123-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: E32)

9 A-1545-124-A DMB-FIT BOARD, COMPLETE (for SERVICE)(F500: MX)

***********************

< CAPACITOR >

C101 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C102 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C105 1-128-994-21 ELECT CHIP 47uF 20% 10V C106 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C108 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C109 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C111 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C112 1-128-994-21 ELECT CHIP 47uF 20% 10V C113 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C114 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C115 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C116 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C117 1-128-994-21 ELECT CHIP 47uF 20% 10V C118 1-128-994-21 ELECT CHIP 47uF 20% 10V C119 1-128-994-21 ELECT CHIP 47uF 20% 10V

C120 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C121 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C122 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C123 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C124 1-165-908-11 CERAMIC CHIP 1uF 10% 10V

C125 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C126 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C127 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C129 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C130 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C132 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C133 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C135 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C136 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C137 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C138 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C139 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C140 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C141 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C144 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C145 1-124-779-00 ELECT CHIP 10uF 20% 16V C146 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C147 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C148 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C149 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C151 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C152 1-162-916-11 CERAMIC CHIP 12PF 5% 50V C153 1-162-917-11 CERAMIC CHIP 15PF 5% 50V C154 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C155 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V


C162 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C163 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V


DMB-FIT

When indicating parts by reference num-ber, please include the board name.

Note:• Due to standardization, replacements in

the parts list may be different from the parts specifi ed in the diagrams or the com-ponents used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.

• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.

• CAPACITORS uF: μF• COILS uH: μH• RESISTORS All resistors are in ohms. METAL: Metal-fi lm resistor. METAL OXIDE: Metal oxide-fi lm resistor. F: nonfl ammable

• SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. .• Abbreviation AUS : Australian model CND : Canadian model E3 : 240V AC area in E model E15 : Iranian model E32 : Latin American model (110 – 240V AC area) EA : Saudi Arabia model KR : Korean model MX : Mexican model RU : Russian model SP : Singapore model TH : Thai model TW : Taiwan model

The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety.Replace only with part number specifi ed.

Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifi é.

The components identifi ed by mark 9 con-tain confi dential information.Strictly follow the instructions whenever the components are repaired and/or replaced.

Les composants identifi és par la marque 9 contiennent des informations confi den-tielles.Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé.

CENTERVer. 1.1


HCD-F200/F500

6767

C164 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C165 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C169 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V


C176 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C177 1-128-994-21 ELECT CHIP 47uF 20% 10V C179 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C180 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C181 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C182 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C183 1-128-934-11 CERAMIC CHIP 0.33uF 20% 10V C184 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C186 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C187 1-128-994-21 ELECT CHIP 47uF 20% 10V

C190 1-128-994-21 ELECT CHIP 47uF 20% 10V C191 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C192 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C193 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C195 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V

C197 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C198 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C199 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C203 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C205 1-164-230-11 CERAMIC CHIP 220PF 5% 50V

C206 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C208 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C209 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C210 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C211 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V

C212 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C213 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C214 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C215 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C217 1-126-204-11 ELECT CHIP 47uF 20% 16V

C218 1-124-779-00 ELECT CHIP 10uF 20% 16V C219 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C220 1-124-779-00 ELECT CHIP 10uF 20% 16V C221 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C222 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V


C602 1-128-994-21 ELECT CHIP 47uF 20% 10V C603 1-128-994-21 ELECT CHIP 47uF 20% 10V C725 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C727 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C728 1-128-994-21 ELECT CHIP 47uF 20% 10V


C734 1-128-994-21 ELECT CHIP 47uF 20% 10V C1100 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C1108 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C1109 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C1110 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C1112 1-128-414-21 ELECT CHIP 220uF 20% 6.3V C1114 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C1115 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C1116 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C1117 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V


C1503 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C3001 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

(F500) C3801 1-126-193-11 ELECT CHIP 1uF 20% 50V C3803 1-126-193-11 ELECT CHIP 1uF 20% 50V C3804 1-126-193-11 ELECT CHIP 1uF 20% 50V

C3808 1-128-994-21 ELECT CHIP 47uF 20% 10V C3810 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C3811 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C3815 1-126-193-11 ELECT CHIP 1uF 20% 50V C3816 1-126-193-11 ELECT CHIP 1uF 20% 50V

C3818 1-126-193-11 ELECT CHIP 1uF 20% 50V C3819 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C3820 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C3901 1-128-994-21 ELECT CHIP 47uF 20% 10V C9972 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

< CONNECTOR >

CN101 1-815-763-32 CONNECTOR, FFC/FPC 24P CN106 1-770-161-21 PIN, CONNECTOR (PC BOARD) 6P CN110 1-784-374-51 CONNECTOR, FFC/FPC 15P* CN201 1-770-470-21 PIN, CONNECTOR (PC BOARD) 6P CN202 1-784-366-51 CONNECTOR, FFC/FPC 7P

CN602 1-816-296-21 PIN, CONNECTOR (PC BOARD) 9P CN701 1-820-735-31 HDMI CONNECTOR (HDMI OUT) CN1101 1-779-993-11 PIN, CONNECTOR (PWB) 5P CN3802 1-817-615-21 CONNECTOR, SQUARE TYPE (RECE) (DMPORT) CN4301 1-778-691-51 CONNECTOR, FFC/FPC 19P

< DIODE >

D1101 6-501-749-01 DIODE MAZ8082G0LS0 D1102 6-501-740-01 DIODE MAZ8068G0LS0 D1103 6-501-740-01 DIODE MAZ8068G0LS0 D9712 8-719-060-48 DIODE RB751V-40TE-17

< FERRITE BEAD >

FB106 1-469-324-21 FERRITE, EMI (SMD) (2012) FB107 1-469-324-21 FERRITE, EMI (SMD) (2012) FB108 1-469-324-21 FERRITE, EMI (SMD) (2012) FB109 1-469-324-21 FERRITE, EMI (SMD) (2012) FB111 1-469-670-21 FERRITE, EMI (SMD) (2012)


FB124 1-469-324-21 FERRITE, EMI (SMD) (2012) FB601 1-469-324-21 FERRITE, EMI (SMD) (2012)

DMB-FIT


HCD-F200/F500

68

FB602 1-469-324-21 FERRITE, EMI (SMD) (2012) FB603 1-469-324-21 FERRITE, EMI (SMD) (2012) FB604 1-469-324-21 FERRITE, EMI (SMD) (2012)




< FILTER >

FL601 1-234-494-21 FILTER, EMI REMOVAL (SMD) FL602 1-233-893-21 FILTER, CHIP EMI FL603 1-234-494-21 FILTER, EMI REMOVAL (SMD) FL3901 1-234-494-21 FILTER, EMI REMOVAL (SMD)

< IC >

IC101 6-711-269-01 IC CXD9894R (EXCEPT F500: CND) IC101 6-711-557-01 IC CXD9915R (F500: CND) IC102 (Not supplied) IC ES29LV320EB70TG-SHE1-0802CE

(F200: AEP, UK) IC102 (Not supplied) IC ES29LV320EB70TG-SHE1-0802GA

(F200: SP, TH) IC102 (Not supplied) IC ES29LV320EB70TG-SHE2-0802UC

(F500: CND, E32, MX)

IC102 (Not supplied) IC ES29LV320EB70TG-SHE2-0802CE(F500: RU, E3, E15, EA, AUS)

IC102 (Not supplied) IC ES29LV320EB70TG-SHE2-0802GA(F500: SP, TW, KR, TH)

IC103 (Not supplied) IC S-24CS64A01-J8T1G IC104 6-709-737-01 IC M12L64164A-7T (G) IC105 6-702-302-01 IC TK11133CSCL-G

IC107 6-702-302-01 IC TK11133CSCL-G IC110 6-707-739-01 IC MM1661JTRE IC201 6-704-524-01 IC FAN8036L IC705 8-759-592-47 IC TC7SZ08FU (TE85R) IC707 6-705-337-01 IC TK11150CSCL-G

IC708 6-702-302-01 IC TK11133CSCL-G IC3001 8-759-592-47 IC TC7SZ08FU (TE85R) (F500) IC3801 8-759-710-97 IC NJM4565M-D

< COIL >

* L701 1-813-308-11 COMMON MODE CHOKE* L702 1-813-308-11 COMMON MODE CHOKE* L703 1-813-308-11 COMMON MODE CHOKE* L704 1-813-308-11 COMMON MODE CHOKE L1101 1-456-799-11 COIL, COMMON MODE CHOKE

L3801 1-469-525-91 INDUCTOR 10uH

< TRANSISTOR >

Q101 6-550-008-01 FET UM6K1N-TN Q102 6-550-653-01 TRANSISTOR QST8TR Q103 8-729-027-52 TRANSISTOR DTC124EKA-T146 Q105 8-729-028-27 FET 2SK2009 (TE85L) Q701 6-550-008-01 FET UM6K1N-TN

Q9724 6-551-699-01 TRANSISTOR ISA1602AM1TP-1EF Q9726 8-729-620-13 TRANSISTOR 2SC4154TP-1EF Q9728 8-729-620-13 TRANSISTOR 2SC4154TP-1EF Q9729 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R101 1-216-809-11 METAL CHIP 100 5% 1/10W R102 1-216-864-11 SHORT CHIP 0 R103 1-218-864-11 METAL CHIP 5.1K 0.5% 1/10W R105 1-216-833-11 METAL CHIP 10K 5% 1/10W R106 1-216-833-11 METAL CHIP 10K 5% 1/10W

R107 1-216-833-11 METAL CHIP 10K 5% 1/10W R108 1-216-857-11 METAL CHIP 1M 5% 1/10W R109 1-216-864-11 SHORT CHIP 0 R110 1-216-841-11 METAL CHIP 47K 5% 1/10W R111 1-216-809-11 METAL CHIP 100 5% 1/10W

R112 1-211-977-11 METAL CHIP 22 0.5% 1/10W R113 1-211-977-11 METAL CHIP 22 0.5% 1/10W R114 1-216-845-11 METAL CHIP 100K 5% 1/10W R115 1-211-977-11 METAL CHIP 22 0.5% 1/10W R116 1-216-821-11 METAL CHIP 1K 5% 1/10W

R117 1-216-841-11 METAL CHIP 47K 5% 1/10W R118 1-216-801-11 METAL CHIP 22 5% 1/10W R120 1-216-801-11 METAL CHIP 22 5% 1/10W R121 1-216-801-11 METAL CHIP 22 5% 1/10W R123 1-216-864-11 SHORT CHIP 0

R124 1-216-841-11 METAL CHIP 47K 5% 1/10W R132 1-216-845-11 METAL CHIP 100K 5% 1/10W R133 1-216-864-11 SHORT CHIP 0 R135 1-216-821-11 METAL CHIP 1K 5% 1/10W R136 1-216-835-11 METAL CHIP 15K 5% 1/10W

R139 1-216-864-11 SHORT CHIP 0 R140 1-216-821-11 METAL CHIP 1K 5% 1/10W R141 1-216-855-11 METAL CHIP 680K 5% 1/10W R142 1-216-845-11 METAL CHIP 100K 5% 1/10W R151 1-216-833-11 METAL CHIP 10K 5% 1/10W

R152 1-216-864-11 SHORT CHIP 0 R153 1-216-864-11 SHORT CHIP 0 R154 1-216-864-11 SHORT CHIP 0 R155 1-216-864-11 SHORT CHIP 0 R156 1-216-809-11 METAL CHIP 100 5% 1/10W

R171 1-216-809-11 METAL CHIP 100 5% 1/10W R175 1-216-864-11 SHORT CHIP 0 R179 1-216-864-11 SHORT CHIP 0 R180 1-216-864-11 SHORT CHIP 0 R189 1-218-827-11 METAL CHIP 150 0.5% 1/10W

R190 1-218-827-11 METAL CHIP 150 0.5% 1/10W R191 1-216-821-11 METAL CHIP 1K 5% 1/10W R193 1-216-821-11 METAL CHIP 1K 5% 1/10W R195 1-218-827-11 METAL CHIP 150 0.5% 1/10W R197 1-218-827-11 METAL CHIP 150 0.5% 1/10W

R198 1-216-809-11 METAL CHIP 100 5% 1/10W R204 1-216-822-11 METAL CHIP 1.2K 5% 1/10W R205 1-216-833-11 METAL CHIP 10K 5% 1/10W R206 1-216-833-11 METAL CHIP 10K 5% 1/10W R207 1-216-826-11 METAL CHIP 2.7K 5% 1/10W

R208 1-216-839-11 METAL CHIP 33K 5% 1/10W R209 1-216-839-11 METAL CHIP 33K 5% 1/10W R210 1-216-841-11 METAL CHIP 47K 5% 1/10W R212 1-216-833-11 METAL CHIP 10K 5% 1/10W

Note: IC102 and IC103 cannot exchange with single. When IC102 and IC103 are damaged, exchange the entire mounted board.

DMB-FITVer. 1.1


HCD-F200/F500

6969

R213 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W

R214 1-216-835-11 METAL CHIP 15K 5% 1/10W R215 1-216-834-11 METAL CHIP 12K 5% 1/10W R216 1-216-834-11 METAL CHIP 12K 5% 1/10W R219 1-216-838-11 METAL CHIP 27K 5% 1/10W R220 1-216-821-11 METAL CHIP 1K 5% 1/10W

R221 1-218-889-11 METAL CHIP 56K 0.5% 1/10W R222 1-216-839-11 METAL CHIP 33K 5% 1/10W R223 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R224 1-216-833-11 METAL CHIP 10K 5% 1/10W R225 1-218-895-11 METAL CHIP 100K 0.5% 1/10W

R226 1-218-889-11 METAL CHIP 56K 0.5% 1/10W R227 1-216-864-11 SHORT CHIP 0 R228 1-216-864-11 SHORT CHIP 0 R230 1-218-893-11 METAL CHIP 82K 0.5% 1/10W R231 1-218-875-11 METAL CHIP 15K 0.5% 1/10W

R232 1-218-877-11 METAL CHIP 18K 0.5% 1/10W R233 1-218-883-11 METAL CHIP 33K 0.5% 1/10W R234 1-216-833-11 METAL CHIP 10K 5% 1/10W R236 1-216-821-11 METAL CHIP 1K 5% 1/10W R237 1-216-821-11 METAL CHIP 1K 5% 1/10W

R238 1-216-821-11 METAL CHIP 1K 5% 1/10W R239 1-216-821-11 METAL CHIP 1K 5% 1/10W R243 1-216-805-11 METAL CHIP 47 5% 1/10W R246 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R247 1-216-821-11 METAL CHIP 1K 5% 1/10W

R730 1-216-826-11 METAL CHIP 2.7K 5% 1/10W R742 1-216-841-11 METAL CHIP 47K 5% 1/10W R743 1-216-864-11 SHORT CHIP 0 (F500) R744 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

(F200) R747 1-216-864-11 SHORT CHIP 0

R748 1-216-864-11 SHORT CHIP 0 R749 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R750 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R751 1-216-864-11 SHORT CHIP 0 R752 1-216-864-11 SHORT CHIP 0

R753 1-216-864-11 SHORT CHIP 0 R781 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R782 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R783 1-216-864-11 SHORT CHIP 0 R784 1-216-864-11 SHORT CHIP 0

R785 1-216-864-11 SHORT CHIP 0 R786 1-216-864-11 SHORT CHIP 0 R901 1-216-864-11 SHORT CHIP 0 (F200) R902 1-216-864-11 SHORT CHIP 0 (F500) R911 1-216-864-11 SHORT CHIP 0 (F500: CND)

R912 1-216-864-11 SHORT CHIP 0(F200: AEP, UK/F500: RU, E3, E15, EA, AUS)

R913 1-216-864-11 SHORT CHIP 0 (F200: SP, TH/F500: SP, TW, KR, TH)

R914 1-216-864-11 SHORT CHIP 0 (F500: E32, MX) R1101 1-218-841-11 METAL CHIP 560 0.5% 1/10W R1102 1-218-827-11 METAL CHIP 150 0.5% 1/10W

R1104 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1108 1-216-864-11 SHORT CHIP 0 R1110 1-216-826-11 METAL CHIP 2.7K 5% 1/10W R1114 1-216-801-11 METAL CHIP 22 5% 1/10W R1115 1-216-864-11 SHORT CHIP 0

R1121 1-216-864-11 SHORT CHIP 0

R1123 1-216-864-11 SHORT CHIP 0 R1127 1-216-833-11 METAL CHIP 10K 5% 1/10W R1128 1-216-833-11 METAL CHIP 10K 5% 1/10W R1129 1-216-845-11 METAL CHIP 100K 5% 1/10W

R1133 1-216-864-11 SHORT CHIP 0 R1134 1-216-864-11 SHORT CHIP 0 R1138 1-216-864-11 SHORT CHIP 0 R1139 1-216-864-11 SHORT CHIP 0 R1140 1-216-864-11 SHORT CHIP 0

R1141 1-216-864-11 SHORT CHIP 0 R1142 1-216-864-11 SHORT CHIP 0 R1143 1-216-864-11 SHORT CHIP 0 R1150 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R1151 1-216-827-11 METAL CHIP 3.3K 5% 1/10W

R1152 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R1155 1-216-833-11 METAL CHIP 10K 5% 1/10W R1167 1-216-864-11 SHORT CHIP 0 R1168 1-216-813-11 METAL CHIP 220 5% 1/10W R1171 1-216-864-11 SHORT CHIP 0

R1176 1-216-864-11 SHORT CHIP 0 R1177 1-216-864-11 SHORT CHIP 0 R1178 1-216-821-11 METAL CHIP 1K 5% 1/10W R1179 1-216-809-11 METAL CHIP 100 5% 1/10W R1180 1-216-809-11 METAL CHIP 100 5% 1/10W

R1182 1-216-864-11 SHORT CHIP 0 R1184 1-216-809-11 METAL CHIP 100 5% 1/10W R1185 1-216-809-11 METAL CHIP 100 5% 1/10W R1187 1-216-805-11 METAL CHIP 47 5% 1/10W R1188 1-216-864-11 SHORT CHIP 0

R1200 1-216-864-11 SHORT CHIP 0 R1202 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10W R1746 1-216-864-11 SHORT CHIP 0 R2505 1-216-864-11 SHORT CHIP 0 R3001 1-216-833-11 METAL CHIP 10K 5% 1/10W

R3002 1-216-833-11 METAL CHIP 10K 5% 1/10W R3003 1-216-833-11 METAL CHIP 10K 5% 1/10W R3004 1-216-833-11 METAL CHIP 10K 5% 1/10W R3005 1-216-864-11 SHORT CHIP 0 (F200) R3803 1-218-879-11 METAL CHIP 22K 0.5% 1/10W

R3804 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3805 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3806 1-218-285-11 METAL CHIP 75 5% 1/10W R3807 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3808 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R3810 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3811 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R3813 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3814 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R3815 1-218-879-11 METAL CHIP 22K 0.5% 1/10W

R3816 1-216-809-11 METAL CHIP 100 5% 1/10W R3817 1-216-809-11 METAL CHIP 100 5% 1/10W R4701 1-216-864-11 SHORT CHIP 0 R4702 1-216-864-11 SHORT CHIP 0 R4703 1-216-864-11 SHORT CHIP 0

R4704 1-216-864-11 SHORT CHIP 0 R4705 1-216-864-11 SHORT CHIP 0 R9918 1-216-821-11 METAL CHIP 1K 5% 1/10W R9920 1-216-864-11 SHORT CHIP 0 R9922 1-216-833-11 METAL CHIP 10K 5% 1/10W

R9924 1-216-821-11 METAL CHIP 1K 5% 1/10W

DMB-FITVer. 1.1


HCD-F200/F500

70

R9928 1-216-837-11 METAL CHIP 22K 5% 1/10W R9929 1-216-837-11 METAL CHIP 22K 5% 1/10W R9934 1-216-833-11 METAL CHIP 10K 5% 1/10W R9935 1-216-864-11 SHORT CHIP 0

R9941 1-216-838-11 METAL CHIP 27K 5% 1/10W R9945 1-216-813-11 METAL CHIP 220 5% 1/10W

< COMPOSITION CIRCUIT BLOCK >

RB103 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB104 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB105 1-234-944-21 RES, NETWORK 47 (1005X4) RB106 1-234-944-21 RES, NETWORK 47 (1005X4) RB107 1-234-400-21 CONDUCTOR, NETWORK (1005X4)

RB108 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB109 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB110 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB111 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB112 1-234-400-21 CONDUCTOR, NETWORK (1005X4)

RB113 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB114 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB115 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB121 1-234-378-11 RES, NETWORK 10K (1005X4)

< VIBRATOR >

X101 1-814-103-21 VIBRATOR, CRYSTAL (27MHz)*************************************************************

A-1497-874-A FL BOARD, COMPLETE ******************

< CAPACITOR >

C801 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C802 1-117-681-11 ELECT CHIP 100uF 20% 16V C805 1-117-681-11 ELECT CHIP 100uF 20% 16V C808 1-163-037-11 CERAMIC CHIP 0.022uF 10% 50V C821 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V

C822 1-128-405-11 ELECT CHIP 22uF 20% 50V C823 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C824 1-128-405-11 ELECT CHIP 22uF 20% 50V C825 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C826 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C827 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C828 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C829 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C830 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C831 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C832 1-117-681-11 ELECT CHIP 100uF 20% 16V C837 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C839 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C840 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C841 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C843 1-117-681-11 ELECT CHIP 100uF 20% 16V

< CONNECTOR >

CN806 1-784-869-51 CONNECTOR, FFC (LIF (NON-ZIF)) 17P CN807 1-784-859-51 CONNECTOR, FFC (LIF (NON-ZIF)) 7P CN808 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P

< DIODE >

D801 6-501-817-01 DIODE MA2J1110GLS0

D802 6-501-817-01 DIODE MA2J1110GLS0 D803 6-501-817-01 DIODE MA2J1110GLS0 D804 6-501-817-01 DIODE MA2J1110GLS0 D805 6-501-738-01 DIODE MAZ8062GMLS0

D821 6-501-534-01 LED NSSW100BT(FRONT PAMEL BUTTON ILLUMINATION)



< IC >

IC801 6-600-684-01 IC NJL22H400B IC802 6-705-899-01 IC ML9208-03MBZ03B IC803 6-702-302-01 IC TK11133CSCL-G

< COIL >

L801 1-469-527-91 INDUCTOR 47uH L802 1-414-754-11 INDUCTOR 10uH

< FLUORESCENT INDICATOR TUBE >

ND801 1-519-996-11 INDICATOR TUBE, FLUORESCENT

< TRANSISTOR >

Q801 6-550-065-01 TRANSISTOR CPH5504-TL-E Q802 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF Q821 6-550-260-01 TRANSISTOR RT1N237M-TP-1

< RESISTOR >

R801 1-216-805-11 METAL CHIP 47 5% 1/10W R804 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R805 1-216-821-11 METAL CHIP 1K 5% 1/10W R806 1-216-845-11 METAL CHIP 100K 5% 1/10W R807 1-216-809-11 METAL CHIP 100 5% 1/10W

R808 1-216-809-11 METAL CHIP 100 5% 1/10W R809 1-216-809-11 METAL CHIP 100 5% 1/10W R810 1-216-809-11 METAL CHIP 100 5% 1/10W R811 1-216-839-11 METAL CHIP 33K 5% 1/10W R812 1-216-833-11 METAL CHIP 10K 5% 1/10W

R813 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R814 1-216-809-11 METAL CHIP 100 5% 1/10W R815 1-216-809-11 METAL CHIP 100 5% 1/10W R818 1-216-817-11 METAL CHIP 470 5% 1/10W R819 1-216-845-11 METAL CHIP 100K 5% 1/10W

R821 1-216-817-11 METAL CHIP 470 5% 1/10W R822 1-216-817-11 METAL CHIP 470 5% 1/10W R825 1-216-821-11 METAL CHIP 1K 5% 1/10W R826 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R827 1-216-821-11 METAL CHIP 1K 5% 1/10W

R828 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R829 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R830 1-216-817-11 METAL CHIP 470 5% 1/10W R831 1-216-817-11 METAL CHIP 470 5% 1/10W

< SWITCH >

S821 1-762-875-21 SWITCH, KEYBOARD (N) S822 1-762-875-21 SWITCH, KEYBOARD (X) S831 1-762-875-21 SWITCH, KEYBOARD (x) S832 1-762-875-21 SWITCH, KEYBOARD (.) S833 1-762-875-21 SWITCH, KEYBOARD (>)

FLDMB-FIT


HCD-F200/F500

7171

S834 1-762-875-21 SWITCH, KEYBOARD (FUNCTION)

< TRANSFORMER >

T801 1-445-231-11 TRANSFORMER, DC-DC CONVERTER************************************************************

KEY-L BOARD ***********

< CONNECTOR >

CN871 1-784-859-51 CONNECTOR, FFC (LIF (NON-ZIF)) 7P

< LED >

D871 6-501-052-02 LED CL-197HB1-D-T (AUTO) (F200) D871 6-501-052-02 LED CL-197HB1-D-T (A.F.D STD) (F500) D873 6-501-052-02 LED CL-197HB1-D-T (WIDE STAGE) (F200) D873 6-501-052-02 LED CL-197HB1-D-T (D.C.S.) (F500)

< TRANSISTOR >

Q871 6-550-260-01 TRANSISTOR RT1N237M-TP-1 Q872 6-550-260-01 TRANSISTOR RT1N237M-TP-1

< RESISTOR >

R871 1-216-821-11 METAL CHIP 1K 5% 1/10W R872 1-216-821-11 METAL CHIP 1K 5% 1/10W

< SWITCH >

S871 1-762-875-21 SWITCH, KEYBOARD (l/1)************************************************************

KEY-R BOARD ***********

< CONNECTOR >

CN881 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P

< RESISTOR >

R881 1-216-821-11 METAL CHIP 1K 5% 1/10W R882 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

< SWITCH >

S881 1-762-875-21 SWITCH, KEYBOARD (VOL –) S882 1-762-875-21 SWITCH, KEYBOARD (VOL +) S883 1-762-875-21 SWITCH, KEYBOARD (Z)************************************************************

A-1497-844-A MAIN BOARD, COMPLETE (F200: AEP, UK) A-1497-860-A MAIN BOARD, COMPLETE (F200: SP, TH) A-1497-869-A MAIN BOARD, COMPLETE (F500: RU) A-1497-875-A MAIN BOARD, COMPLETE (F500: CND, E3, E15,

E32, EA, MX, SP, TW, TH, AUS) A-1498-991-A MAIN BOARD, COMPLETE (F500: KR) ********************

< LEAD >

A301 1-537-584-11 PIN, LEAD

< CAPACITOR >

C101 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C102 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C103 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C104 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C107 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C111 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C112 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C201 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C202 1-128-394-11 ELECT CHIP 220uF 20% 10V C203 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C204 1-162-921-11 CERAMIC CHIP 33PF 5% 50V C205 1-162-922-11 CERAMIC CHIP 39PF 5% 50V C206 1-128-394-11 ELECT CHIP 220uF 20% 10V C207 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C208 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C209 1-128-394-11 ELECT CHIP 220uF 20% 10V C210 1-124-779-00 ELECT CHIP 10uF 20% 16V C211 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C212 1-124-779-00 ELECT CHIP 10uF 20% 16V C213 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C214 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C215 1-126-193-11 ELECT CHIP 1uF 20% 50V C216 1-124-779-00 ELECT CHIP 10uF 20% 16V C217 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C218 1-124-779-00 ELECT CHIP 10uF 20% 16V

C219 1-126-193-11 ELECT CHIP 1uF 20% 50V C220 1-126-193-11 ELECT CHIP 1uF 20% 50V C221 1-126-193-11 ELECT CHIP 1uF 20% 50V C222 1-126-193-11 ELECT CHIP 1uF 20% 50V C223 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C224 1-128-994-21 ELECT CHIP 47uF 20% 10V C225 1-126-193-11 ELECT CHIP 1uF 20% 50V C226 1-126-193-11 ELECT CHIP 1uF 20% 50V C251 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C252 1-135-474-21 ELECT CHIP 330uF 20% 6.3V

C253 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C254 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C255 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C256 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C257 1-124-779-00 ELECT CHIP 10uF 20% 16V

C258 1-110-530-11 ELECT CHIP 1000uF 20% 6.3V C259 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C260 1-117-681-11 ELECT CHIP 100uF 20% 16V C261 1-124-779-00 ELECT CHIP 10uF 20% 16V C262 1-126-193-11 ELECT CHIP 1uF 20% 50V

C263 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C264 1-110-530-11 ELECT CHIP 1000uF 20% 6.3V C274 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C278 1-126-205-11 ELECT CHIP 47uF 20% 6.3V

(F200) C281 1-126-205-11 ELECT CHIP 47uF 20% 6.3V

(F200)

C282 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V(F200)

C301 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C302 1-117-681-11 ELECT CHIP 100uF 20% 16V C304 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V

(F200: AEP, UK/F500: RU, KR) C305 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V

(F200: AEP, UK/F500: RU, KR)

C701 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C702 1-117-681-11 ELECT CHIP 100uF 20% 16V C703 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C704 1-117-681-11 ELECT CHIP 100uF 20% 16V

KEY-L KEY-R MAINVer. 1.1

FL


HCD-F200/F500

72

C705 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C706 1-117-681-11 ELECT CHIP 100uF 20% 16V C707 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C708 1-117-681-11 ELECT CHIP 100uF 20% 16V C709 1-128-398-11 ELECT CHIP 220uF 20% 16V C710 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V


C718 1-117-681-11 ELECT CHIP 100uF 20% 16V C719 1-128-394-11 ELECT CHIP 220uF 20% 10V C720 1-128-394-11 ELECT CHIP 220uF 20% 10V C721 1-117-681-11 ELECT CHIP 100uF 20% 16V C722 1-117-681-11 ELECT CHIP 100uF 20% 16V

C723 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C724 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C731 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C732 1-117-681-11 ELECT CHIP 100uF 20% 16V C733 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C734 1-117-681-11 ELECT CHIP 100uF 20% 16V C902 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

(F500) C904 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C905 1-164-230-11 CERAMIC CHIP 220PF 5% 50V

C906 1-126-208-21 ELECT CHIP 47uF 20% 4V(F500)

C907 1-162-927-11 CERAMIC CHIP 100PF 5% 50V(F500)

C908 1-126-208-21 ELECT CHIP 47uF 20% 4V(F500)

C909 1-124-779-00 ELECT CHIP 10uF 20% 16V(F500)




C913 1-128-993-21 ELECT CHIP 22uF 20% 10V(F500)


C915 1-128-993-21 ELECT CHIP 22uF 20% 10V(F500)


< CONNECTOR >

CN101 1-568-830-11 CONNECTOR, FFC 11P (F200: AEP, UK/F500: RU) CN102 1-784-770-11 CONNECTOR, FFC 9P

(EXCEPT F200: AEP, UK/F500: RU) CN103 1-784-376-51 CONNECTOR, FFC/FPC 17P CN105 1-778-691-51 CONNECTOR, FFC/FPC 19P CN106 1-784-374-51 CONNECTOR, FFC/FPC 15P

* CN107 1-564-712-11 PIN, CONNECTOR (SMALL TYPE) 10P CN110 1-784-861-51 CONNECTOR, FFC (LIF (NON-ZIF)) 9P* CN702 1-564-710-11 PIN, CONNECTOR (SMALL TYPE) 8P* CN708 1-564-711-11 PIN, CONNECTOR (SMALL TYPE) 9P

< DIODE >

D102 6-501-817-01 DIODE MA2J1110GLS0 D301 8-719-058-24 DIODE RB501V-40TE-17 D701 6-501-817-01 DIODE MA2J1110GLS0 D702 6-501-817-01 DIODE MA2J1110GLS0 D703 6-501-817-01 DIODE MA2J1110GLS0

D704 6-501-817-01 DIODE MA2J1110GLS0 D705 6-501-817-01 DIODE MA2J1110GLS0 D706 6-501-817-01 DIODE MA2J1110GLS0

< TERMINAL >

* ET701 1-780-408-11 TERMINAL* ET702 1-780-408-11 TERMINAL* ET703 1-780-408-11 TERMINAL

< FERRITE BEAD >


< FILTER >

FL201 1-234-177-21 FILTER, CHIP EMI FL202 1-234-177-21 FILTER, CHIP EMI FL203 1-234-177-21 FILTER, CHIP EMI FL272 1-234-177-21 FILTER, CHIP EMI

< IC >

IC101 A-1545-113-A IC R5F3640DDFAR (for SERVICE) (F200) IC101 A-1545-194-A IC R5F3640DDFAR (for SERVICE) (F500) IC201 6-710-804-01 IC AK4683EQ IC251 6-707-489-01 IC BH7868FS-E2 IC273 6-703-238-01 IC TC7WZ34FK (TE85R)

IC281 8-759-592-47 IC TC7SZ08FU (TE85R) (F200) IC701 6-712-613-01 IC SI-3010KM-TLS IC702 6-712-613-01 IC SI-3010KM-TLS IC703 6-712-613-01 IC SI-3010KM-TLS IC704 6-712-613-01 IC SI-3010KM-TLS

IC705 6-712-613-01 IC SI-3010KM-TLS IC706 6-712-613-01 IC SI-3010KM-TLS IC709 8-759-700-07 IC NJM2903M IC901 6-600-466-01 IC TORX147L (SONY)

(SAT/CABLE DIGITAL IN OPTICAL) IC902 8-759-278-58 IC NJM4558V-TE2 (F500)

IC941 6-600-466-01 IC TORX147L (SONY) (TV DIGITAL IN OPTICAL)

< JACK >

J903 1-820-390-11 JACK, PIN 2P (F200) (SAT/CABLE DIGITALIN COAXIAL/DIGITAL OUT COAXIAL)

J904 1-785-448-21 JACK (F500) (ECM-AC2) J906 1-821-749-11 JACK, PIN 6P (VIDEO OUT COMPONENT Y/PB/

CB/PR/CR/VIDEO OUT VIDEO/TV AUDIO IN L/R)

J907 1-784-431-11 JACK, PIN 1P (F500) (DIGITAL OUT COAXIAL)

< COIL >

L201 1-469-525-91 INDUCTOR 10uH L202 1-469-525-91 INDUCTOR 10uH L203 1-469-525-91 INDUCTOR 10uH L251 1-469-525-91 INDUCTOR 10uH L301 1-469-525-91 INDUCTOR 10uH

MAINVer. 1.1


HCD-F200/F500

7373

< TRANSISTOR >

Q271 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF (F200) Q901 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF (F500)

< RESISTOR >

R101 1-216-809-11 METAL CHIP 100 5% 1/10W R102 1-216-809-11 METAL CHIP 100 5% 1/10W R103 1-216-809-11 METAL CHIP 100 5% 1/10W R104 1-216-833-11 METAL CHIP 10K 5% 1/10W R105 1-216-809-11 METAL CHIP 100 5% 1/10W

R106 1-216-833-11 METAL CHIP 10K 5% 1/10W R107 1-216-821-11 METAL CHIP 1K 5% 1/10W R108 1-216-864-11 SHORT CHIP 0 R109 1-216-833-11 METAL CHIP 10K 5% 1/10W R110 1-216-809-11 METAL CHIP 100 5% 1/10W

R111 1-216-809-11 METAL CHIP 100 5% 1/10W R112 1-216-809-11 METAL CHIP 100 5% 1/10W R113 1-216-833-11 METAL CHIP 10K 5% 1/10W R114 1-216-809-11 METAL CHIP 100 5% 1/10W R115 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R116 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R117 1-216-833-11 METAL CHIP 10K 5% 1/10W R118 1-216-809-11 METAL CHIP 100 5% 1/10W R119 1-216-809-11 METAL CHIP 100 5% 1/10W R120 1-216-809-11 METAL CHIP 100 5% 1/10W

R121 1-216-809-11 METAL CHIP 100 5% 1/10W R122 1-216-833-11 METAL CHIP 10K 5% 1/10W R123 1-216-809-11 METAL CHIP 100 5% 1/10W R125 1-216-809-11 METAL CHIP 100 5% 1/10W R126 1-216-809-11 METAL CHIP 100 5% 1/10W

R127 1-216-809-11 METAL CHIP 100 5% 1/10W R128 1-216-809-11 METAL CHIP 100 5% 1/10W R129 1-216-809-11 METAL CHIP 100 5% 1/10W R130 1-216-809-11 METAL CHIP 100 5% 1/10W R131 1-216-809-11 METAL CHIP 100 5% 1/10W

R132 1-216-809-11 METAL CHIP 100 5% 1/10W R133 1-216-809-11 METAL CHIP 100 5% 1/10W R134 1-216-833-11 METAL CHIP 10K 5% 1/10W R135 1-216-845-11 METAL CHIP 100K 5% 1/10W R136 1-216-809-11 METAL CHIP 100 5% 1/10W

R137 1-216-809-11 METAL CHIP 100 5% 1/10W R138 1-216-809-11 METAL CHIP 100 5% 1/10W R139 1-216-809-11 METAL CHIP 100 5% 1/10W R140 1-216-809-11 METAL CHIP 100 5% 1/10W R141 1-216-833-11 METAL CHIP 10K 5% 1/10W

R142 1-216-809-11 METAL CHIP 100 5% 1/10W(F200: AEP, UK/F500: RU)

R143 1-216-809-11 METAL CHIP 100 5% 1/10W R145 1-216-809-11 METAL CHIP 100 5% 1/10W R146 1-216-809-11 METAL CHIP 100 5% 1/10W R147 1-216-809-11 METAL CHIP 100 5% 1/10W

R148 1-216-809-11 METAL CHIP 100 5% 1/10W R149 1-216-833-11 METAL CHIP 10K 5% 1/10W R150 1-216-809-11 METAL CHIP 100 5% 1/10W R151 1-216-809-11 METAL CHIP 100 5% 1/10W R152 1-216-809-11 METAL CHIP 100 5% 1/10W

R153 1-216-809-11 METAL CHIP 100 5% 1/10W R157 1-216-809-11 METAL CHIP 100 5% 1/10W R158 1-216-864-11 SHORT CHIP 0

(EXCEPT F200: AEP, UK/F500: RU)

R159 1-216-864-11 SHORT CHIP 0(EXCEPT F200: AEP, UK/F500: RU)

R160 1-216-833-11 METAL CHIP 10K 5% 1/10W

R161 1-216-809-11 METAL CHIP 100 5% 1/10W R163 1-216-833-11 METAL CHIP 10K 5% 1/10W R165 1-216-833-11 METAL CHIP 10K 5% 1/10W R167 1-216-833-11 METAL CHIP 10K 5% 1/10W R168 1-216-809-11 METAL CHIP 100 5% 1/10W

(F200: AEP, UK/F500: RU)

R169 1-216-809-11 METAL CHIP 100 5% 1/10W R170 1-216-833-11 METAL CHIP 10K 5% 1/10W R171 1-216-857-11 METAL CHIP 1M 5% 1/10W R201 1-216-864-11 SHORT CHIP 0 R202 1-216-864-11 SHORT CHIP 0


R208 1-216-864-11 SHORT CHIP 0 R209 1-216-864-11 SHORT CHIP 0 R210 1-216-821-11 METAL CHIP 1K 5% 1/10W R212 1-216-841-11 METAL CHIP 47K 5% 1/10W R213 1-216-841-11 METAL CHIP 47K 5% 1/10W

R214 1-216-841-11 METAL CHIP 47K 5% 1/10W R215 1-216-841-11 METAL CHIP 47K 5% 1/10W R216 1-216-845-11 METAL CHIP 100K 5% 1/10W R217 1-216-845-11 METAL CHIP 100K 5% 1/10W R218 1-216-841-11 METAL CHIP 47K 5% 1/10W

R219 1-216-841-11 METAL CHIP 47K 5% 1/10W R220 1-216-841-11 METAL CHIP 47K 5% 1/10W R221 1-216-841-11 METAL CHIP 47K 5% 1/10W R222 1-218-873-11 METAL CHIP 12K 0.5% 1/10W R223 1-216-864-11 SHORT CHIP 0

R224 1-216-864-11 SHORT CHIP 0 R251 1-218-285-11 METAL CHIP 75 5% 1/10W R252 1-218-285-11 METAL CHIP 75 5% 1/10W R253 1-218-285-11 METAL CHIP 75 5% 1/10W R254 1-218-285-11 METAL CHIP 75 5% 1/10W

R274 1-216-821-11 METAL CHIP 1K 5% 1/10W(F200)

R275 1-216-821-11 METAL CHIP 1K 5% 1/10W(F200)

R276 1-216-813-11 METAL CHIP 220 5% 1/10W(F200)

R278 1-216-807-11 METAL CHIP 68 5% 1/10W(F200)

R279 1-216-864-11 SHORT CHIP 0 (F200)

R280 1-216-864-11 SHORT CHIP 0 (F200) R281 1-216-833-11 METAL CHIP 10K 5% 1/10W

(F200) R282 1-216-821-11 METAL CHIP 1K 5% 1/10W

(F200) R301 1-218-285-11 METAL CHIP 75 5% 1/10W R302 1-216-864-11 SHORT CHIP 0


R320 1-216-864-11 SHORT CHIP 0

MAINVer. 1.1


HCD-F200/F500

74

R321 1-216-864-11 SHORT CHIP 0 R322 1-216-864-11 SHORT CHIP 0 R323 1-216-864-11 SHORT CHIP 0 R324 1-216-864-11 SHORT CHIP 0

R325 1-216-864-11 SHORT CHIP 0 R326 1-216-864-11 SHORT CHIP 0 R327 1-216-864-11 SHORT CHIP 0 R328 1-216-864-11 SHORT CHIP 0 R391 1-216-864-11 SHORT CHIP 0 (F200: SP, TH)

R392 1-216-864-11 SHORT CHIP 0 (F200: AEP, UK) R393 1-216-864-11 SHORT CHIP 0 (F500: CND, E3, E15, E32,

EA, MX, SP, TW, TH, AUS) R394 1-216-864-11 SHORT CHIP 0 (F500: RU) R395 1-216-864-11 SHORT CHIP 0 (F500: KR) R701 1-218-858-11 METAL CHIP 3K 0.5% 1/10W

R702 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R703 1-216-809-11 METAL CHIP 100 5% 1/10W R704 1-218-847-11 METAL CHIP 1K 0.5% 1/10W R705 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R706 1-216-809-11 METAL CHIP 100 5% 1/10W

R707 1-218-847-11 METAL CHIP 1K 0.5% 1/10W R708 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R709 1-216-809-11 METAL CHIP 100 5% 1/10W R710 1-218-855-11 METAL CHIP 2.2K 0.5% 1/10W R711 1-218-871-11 METAL CHIP 10K 0.5% 1/10W

R712 1-216-809-11 METAL CHIP 100 5% 1/10W R713 1-216-809-11 METAL CHIP 100 5% 1/10W R714 1-218-873-11 METAL CHIP 12K 0.5% 1/10W R715 1-218-891-11 METAL CHIP 68K 0.5% 1/10W R716 1-218-871-11 METAL CHIP 10K 0.5% 1/10W

R717 1-245-287-91 METAL CHIP 0.1 1% 1W R718 1-216-815-11 METAL CHIP 330 5% 1/10W R719 1-216-839-11 METAL CHIP 33K 5% 1/10W R720 1-216-839-11 METAL CHIP 33K 5% 1/10W R721 1-218-885-11 METAL CHIP 39K 0.5% 1/10W

R722 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R723 1-218-885-11 METAL CHIP 39K 0.5% 1/10W R724 1-218-885-11 METAL CHIP 39K 0.5% 1/10W R725 1-216-809-11 METAL CHIP 100 5% 1/10W R731 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10W

R732 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R733 1-216-809-11 METAL CHIP 100 5% 1/10W R734 1-218-885-11 METAL CHIP 39K 0.5% 1/10W R901 1-216-864-11 SHORT CHIP 0 R902 1-216-821-11 METAL CHIP 1K 5% 1/10W

R903 1-216-821-11 METAL CHIP 1K 5% 1/10W R904 1-218-285-11 METAL CHIP 75 5% 1/10W R906 1-216-864-11 SHORT CHIP 0 R907 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

(F500) R908 1-216-845-11 METAL CHIP 100K 5% 1/10W

R909 1-216-845-11 METAL CHIP 100K 5% 1/10W R910 1-216-845-11 METAL CHIP 100K 5% 1/10W

(F500) R911 1-216-817-11 METAL CHIP 470 5% 1/10W

(F500) R912 1-216-824-11 METAL CHIP 1.8K 5% 1/10W

(F500) R913 1-216-821-11 METAL CHIP 1K 5% 1/10W

(F500)

R914 1-216-837-11 METAL CHIP 22K 5% 1/10W(F500)

R915 1-216-817-11 METAL CHIP 470 5% 1/10W(F500)

R916 1-216-838-11 METAL CHIP 27K 5% 1/10W(F500)

R917 1-216-809-11 METAL CHIP 100 5% 1/10W(F500)

R918 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(F500)

R919 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(F500)

R920 1-216-845-11 METAL CHIP 100K 5% 1/10W

R921 1-216-845-11 METAL CHIP 100K 5% 1/10W R922 1-216-845-11 METAL CHIP 100K 5% 1/10W R923 1-216-845-11 METAL CHIP 100K 5% 1/10W R941 1-216-864-11 SHORT CHIP 0 R946 1-216-864-11 SHORT CHIP 0

< VIBRATOR >

X101 1-813-562-21 VIBRATOR, CERAMIC (10MHz) X201 1-781-465-21 VIBRATOR, CRYSTAL (12.288MHz)************************************************************

MS-214 BOARD ************

< CONNECTOR >

CN001 1-815-569-11 CONNECTOR, FFC/FPC 7P

< SWITCH >

S001 1-762-951-13 SWITCH, PUSH (DISC IN/OUT) S002 1-762-951-13 SWITCH, PUSH (CHUCKING) S003 1-762-951-13 SWITCH, PUSH (TRIGGER)************************************************************

USB BOARD *********

< CAPACITOR >


< CONNECTOR >

CN501 1-794-548-21 CONNECTOR, USB (A) (USB) CN502 1-564-721-11 PIN, CONNECTOR (SMALL TYPE) 5P*************************************************************

USBMAIN MS-214Ver. 1.1

Ref. No. Part No. Description Remark

HCD-F200/F500

7575


Ver. 1.1

MISCELLANEOUS **************

52 1-828-295-11 WIRE (FLAT TYPE) (7 CORE) 53 1-828-002-11 WIRE (FLAT TYPE) (17 CORE) 102 1-828-954-11 WIRE (FLAT TYPE) (9 CORE) (F200: SP, TH/F500:

CND, E3, E15, E32, MX, SP, TW, KR, TH, AUS) 102 1-828-964-11 WIRE (FLAT TYPE) (11 CORE)

(F200: AEP, UK/F500: RU) 103 1-693-768-11 TUNER (FM) (F200: AEP, UK/F500: RU)

103 1-693-769-11 TUNER (FM) (F200: SP, TH/F500: E3, E15, E32, EA, MX, SP, TW, TH, AUS)

103 1-693-770-11 TUNER (FM) (F500: CND) 103 1-693-771-11 TUNER (FM) (F500: KR) 151 1-828-298-11 WIRE (FLAT TYPE) (7 CORE) 152 1-828-341-11 WIRE (FLAT TYPE) (15 CORE)

153 1-828-360-11 WIRE (FLAT TYPE) (19 CORE) 155 1-828-347-11 WIRE (FLAT TYPE) (17 CORE) 156 1-833-994-21 CABLE, SYSTEM 159 1-828-253-51 WIRE (FLAT TYPE) (24 CORE) 256 A-1114-646-A MD (AU) ASSY

0 257 8-820-322-04 OPTICAL PICK-UP BLOCK (KHM-313CAB/C2RP) (Including sled motor, spindle motor)

M001 X-4955-496-1 MOTOR (PULLEY) ASSY (LOADING)

HCD-F200/F500

REVISION HISTORY

Checking the version allows you to jump to the revised page.Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

Ver. Date Description of Revision1.0 2008.05 New

1.1 2008.08 Addition of Thai model (HCD-F200)

Addition of Latin American, Saudi Arabia, Mexican, Taiwan, Korean and Thai models (HCD-F500)

HCD-F200/F500HCD-F500 AEP Model UK Model HCD-F200 Singapore Model Thai Model HCD-F200/F500 Ver. 1.1...

Documents

Transcript of HCD-F200/F500HCD-F500 AEP Model UK Model HCD-F200 Singapore Model Thai Model HCD-F200/F500 Ver. 1.1...