Harry Mason Ltd 217 Thimble Mill Lane Birmingham B7 5HS +44 (0) 121 328 5900 Dispensing Equipment...

Harry Mason Ltd217 Thimble Mill Lane

BirminghamB7 5HS

+44 (0) 121 328 5900

Dispensing Equipment2-5

Vertical Ale Extractor6-8

Laydown Dispense9-10

Venting Equipment11-13

Cellar Equipment16-22

Bar Equipment23-24

Cask Handling25-26

Free Delivery on Orders over

£100

Spares29-30Buy Online or Call us direct

Cooling Equipment27-28

Gas Accessories14-15

WWW.HARRYMASON.CO.UK

http://www.harrymason.co.uk/

2

Dis

pens

e Eq

uipm

ent

Cabinets

1 Pull £214.20 216mm Wide




5 Pull £1,071.00 825mm Wide

6 Pull £1,285.20 978mm Wide

7 Pull £1,499.40 1130mm Wide

Harry Mason have been making cabinet beer engines for over 200 years.We can manufacture any Hand Pull cabinet to your personal specification. Cabinets can have solid plinths or can be through the bar units.

+44 (0) 121 328 5900 www.harrymason.co.ukBack to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Beer%20Dispense/beer-engines


3

Dis

pens

e Eq

uipm

ent

Shakespeare

The Shakespeare is a cylinderless unit which is revolutionising traditional dispense. It replicates the traditional hand pull through the use of a damper and a special on/off valve. It looks, reacts and feels just like a traditional hand pull. The Shakespeare needs to be pump assisted and no check valve is required. The benefits are the massive savings on ullage/wastage during line cleaning and because there is no cylinder additional re-circ cooling is not necessary.

1 Pull £152.40

2 Pull £304.80

3 Pull £457.20

4 Pull £609.60

5 Pull £762.00

6 Pull £914.00


http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Beer%20Dispense/Clamp-On-Dispense-Unit/cylinderless-unit-hand-pull-clamp-on


4

Dis

pens

e Eq

uipm

ent

Pullman

The Masons Pullman Clamp On Beer Engine is the traditional way of dispensing real ale. It is available in ¼ pint or ½ pint and standard or water cooled cylinders. The aluminium frame and solid brass parts make this unit extremely durable.

1 Pull £173.40

2 Pull £346.80

3 Pull £520.20

4 Pull £693.60

5 Pull £867.00

6 Pull £1,040.40


http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Beer%20Dispense/Clamp-On-Dispense-Unit/hand-pull-dispense-unit-clamp-on


5

Dis

pens

e Eq

uipm

ent

Through The Bar

Type Price

Pullman £173.40

Shakespeare £152.40

The full range of Harry Mason Hand Pulls are available as a through the bar unit. The Masons Through the Bar Unit can replace your old Hand Pull without needing the bar top altered as Masons provide a range of conversion kits which will cover most other manufacturers. Please call for details on which units it can replace.


http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Beer%20Dispense/through-the-bar-hand-pull

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Beer%20Dispense/through-the-bar-hand-pull


6

Verti

cal A

le E

xtra

ction

Flexible Ale Extractors

+44 (0) 121 328 5900 www.harrymason.co.uk

The Harry Mason Flexible Ale Extractor has been engineered with practicality in mind. The outlet contains a Non Return Valve and a hop filter which removes most sediment that could be drawn from the barrel. When using the flexible ale extractor the amount of ullage/waste will be minimised in comparison to other types of dispense. The Flexible Extractor is available in single and double outlet, ¾ BSP, L or Y threads and all barrel sizes.

The Cleaning Kit comes complete with 3 different sizes of brush and a key for removal of the Non Return Valve.

SingleFlexible Ale Extractor

£35.00

DoubleFlexible Ale Extractor

£45.00

Spare Keystone Bodies

£14.95

Cleaning Kit

£4.95

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Ale-Extractors-flexible-rod-vertical-extraction/vertical-extraction-flexible-ale-extractor


7

Verti

cal A

le E

xtra

ction

Rigid Ale Extractors


The Rigid Ale Extractor is the traditional way of vertical dispense. Its stainless steel tube reaches the bottom of your standing cask which saves on stillage and racking expense. Very popular in smaller cellars these extractors come with single or double outlets , ¾ BSP, L or Y threads and one size fits all barrels.

Single Ale Extractor £24.95

Double Ale Extractor £35.00

Spare Keystone Body £14.95

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Ale-Extractors-flexible-rod-vertical-extraction/ridgid-Ale-Extractors


8

Spar

es

Ale Extractors Spares


Keystone Body £14.95

Stainless Steel Keystone Body £26.80

Screw in Bottom Filter £2.70

Blanking Plug £2.50

Cleaning Brush £1.85

Spare Keystone Bodies are available for both the Flexible and Rigid Extractors. These are used to prepare the following barrel that will need tapping and resting before use.All other parts for both types of Extractors are available, please try our website or contact our office.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Spares/Ale-Extractor-Spares


9

Layd

own

Dis

pens

e

Complete Cask Taps


Single Cask Tap £10.00

Double Cask Tap £15.00

Traditionally the barrel lies on a stillage and is tapped with a cask tap.Harry Mason will supply the complete tapping kit for fitting your beer line. The complete Cask Tap comes with a hop filter, nut and tail.Available in ¾ BSP, L or Y threadsand all Standard Beer Line Tail Sizes

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Cellar%20Sundries/cask-%20taps-complete


10

Layd

own

Dis

pens

e

Cask Taps


We provide a variety of different cask taps. Stainless Steel Cask Taps are significantly more durable than the plastic taps. The Wood Cask Tap is a disposable tap ideal for beer festivals, it dispenses straight to the glass.

Tap Thread Each 5+ Each

Single Plastic Tap ¾ BSP, L or Y £8.20 £7.75

Double Plastic Tap ¾ BSP, L or Y £11.50 £10.00

Racking Tap ¾ BSP or Y £9.95 £9.00

Wooden Tap n/a £2.85 ------

Stainless Steel Racking

n/a £49.30 ------

Stainless Steel Straight

¾ BSP, L or Y £55.25 ------

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Cellar%20Sundries/Cask%20Taps


11

Venti

ng E

quip

men

t

Cask Venting


The traditional way of venting a laydown cask is by using hard and soft pegs, however Harry Mason created the Autovent which contains a Non Return Valve to provide an air tight seal to the beer. The reusable Autovent only opens when the beer is being drawn from the barrel and therefore does not need changing between sessions.

Bag of 50 Hard Pegs

£6.50

Bag of 50 Soft Pegs

£7.50

AUTOVENTEach 5+ Each

£6.00 £5.00

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Venting%20Equipment


12

Venti

ng E

quip

men

t

Cask Venting


Co2 Barrel Spigot gives you the option to put Co2 on top of your beer which extends the life of the product.

Barrel Venting Punch is used to break through the shive to allow venting pegs or autovents access.

Co2 Barrel Spigot £5.30

Stainless Steel Barrel Spigot £24.50

Barrel Venting Punch £2.25

The Stainless Steel Co2 Barrel Spigot performs the same job as the plastic one, however it is a lot more durable.

Back to Front Page



13

Venti

ng E

quip

men

t

Venting Equipment


Shive Hammer £25.30

Spare Shive Tip £8.20

Shive Removal Tool £12.50

Barrel Vent Peg £12.65

Non Choke Barrel Vent Peg £23.75

The Barrel Vent Peg should be inserted into the shive after tapping the barrel to release the condition of the beer. It comes complete with tubing to run overspill into a bucket.

The Non Choke Vent Peg has a plunger to control the release of pressure from the barrel.

Harry Mason offer the traditional Shive Hammer for removal of the bung. Spare tips are available and are easily replaced.

The new Bung Extractor with Acetal handle is now available. This product is for use with a rubber mallet and also has spare tips available

Back to Front Page



14

Gas

Acc

esso

ries

Gas Accessories


Aircock 3 Push In 3/8 Fittings £6.82

Aircock 2 Push In 3/8 Fittings and a Serrated Tail

£6.82

Aircock 3 Serrated Tails £6.82

Harry Mason offer a full range of Air Cocks for your cellar gas ring main.

Option 1. Three 3/8 push in John Guest fittings for quick release.

Option 2. Two 3/8 push in John Guest fittings and a serrated tail for hose and jubilee clip.

Option 3. Three serrated tails for hose and jubilee clips fittings.

Back to Front Page



15

Gas

Acc

esso

ries

Gas Accessories


Co2 Keystone Body Plastic £19.90

Co2 Keystone Body Stainless Steel £29.90

Cylinder Bottle Bracket £9.50

Co2 Spanner 3/4bsp or Std £2.49

Extractor Keystone Bodies can have double outlets to allow blanket pressure on the beer which enhances the life of the beer.Available in stainless steel or acetal these bodies fit all standard extractors.

Cylinder Bottle bracketsare for safe storage of gas cylinders and highly recommended for Health and Safety.

Cellar Spanners have dual fittings. Gas and Beer Line thread. Available in ¾ BSP or Brewery Standard threads.

Back to Front Page



16

Cella

r Equ

ipm

ent

Cellar Equipment


Rubber Mallet £5.78

Cellar Tidy £32.90

Wooden Thermometer £3.25

Plastic Thermometer £2.10

A Rubber Mallet is needed in any cellar that serves cask, you need it to knock in venting equipment, cask taps or keystone bodies.

The Harry Mason Cellar Tidy is a handy way to organise all your cellar equipment with different compartments to hold mallets, cask taps, hop filters, washers and venting equipment.

Cellar Thermometers are crucial in assisting you maintain the preferred temperature of your cellar at a glance.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Ancillary%20Equipment


17

Cella

r Equ

ipm

ent

Starter Kits


Harry Mason offer complete starter kits that are ideal for the licensees who are new to cask ale. We provide the traditional laydown kit which has Cask Taps, Autovents and Barrel Wedges. Alternatively we have the Upright Dispense Kits which are ideal for small cellars. The Upright kit contains a Flexible or Rigid Ale Extractor along with all a cellar will require.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Starter%20Kits


18

Cella

r Equ

ipm

ent

Nuts, Tails & Washers


Thread Each 5+ Each

¾ BSP £0.65 £0.60

Y Thread £0.65 £0.60

L Thread £0.65 £0.60

Thread Each 5+ Each

¾ BSP £0.60 £0.50

Y or L Thread

£0.60 £0.50

Thread 10’s

¾ BSP £1.00

Y or L Thread £1.00

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Spares/Ale-Extractor-Spares/Nuts-burr-Tails-Washers


19

Cella

r Equ

ipm

ent

Hose Clips


SIZE TO SUIT HOSE PRICE

12 Hose Clip 9.5mm - 12mm £0.30

20 Hose Clip 13mm - 20mm £0.30

With all types of beer dispense it is imperative that the beer line is air tight to work properly. Failure to do this will result in sucking air and fobbing of the beer. We offer a full range of hose clips to fit all beer line sizes.

Back to Front Page



20

Cella

r Equ

ipm

ent

Hop Filters


Threads 10’s 100’s

¾ BSP £3.20 £30.00

L or Y Thread £3.20 £30.00

Harry Mason has manufactured Hop Filters for over 100 years. The original brass mesh and leather has been replaced by stainless steel and supple plastic. It fits on top of the tail inside the nut and also helps seal the connection. The filter prevents sediment from being dispensed into the glass.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Spares/Ale-Extractor-Spares/Hop-Filter-Top-Hat-Ale-Filter


21

Cella

r Equ

ipm

ent

Turndown Spout


Threads Tube Size Each 5+ Each

¾ BSP ½”, 3/8” & 5/16”

£3.80 £3.50

Y or L Thread

½”, 3/8” & 5/16”

£3.80 £3.50

The Turndown Spout is designed for dispensing straight from a cask tap into a glass. These are available at a bend of 90 or 70 degrees

We also provide a Turndown Spout with a threaded end so you can attach a sparkler if required.

Threads Tube Size Each

¾ BSP With Sparkler Ends

½” £7.20

Y or L Thread With Sparkler Ends

½” £7.20

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Nuts-burr-Tails-Washers/Turndown%20Spouts


22

Cella

r Equ

ipm

ent

Dipsticks


Dipstick Price

Upright £6.75

Laydown £6.75

Plastic Laydown £13.50

The Dipstick are printed so each side is specific to different types of Barrels such as Firkin and Kilderkin. Please check you purchase the correct dipstick for your method of dispense.

Back to Front Page



23

Bar E

quip

men

t

Bar Equipment


Spirit Strainer stainless steel 12” x 6”

Plastic Bar Drip Traysavailable in Blue, Black, Green, Yellow, Cream and Brown 18” x 9”

We have a large range of Tap Sparklers, such as the Standard Adjustable Sparkler, Multibore Sparkler with different hole sizes, Creamflow and Guinness Nozzles.

Spirit Strainer £14.10

Drip Trays (Any Colour) £3.63

Adjustable Sparkler £0.49

Mulitbore White 0.6mm Holes £0.99

Multibore Black 0.6mm Holes £0.99

Multibore Black 1mm Holes £0.99

Guinness Nozzle £1.50

Creamflow Nozzle £1.50

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Bar-Equipment


24

Bar E

quip

men

t

Bar Equipment


Harry Mason offer two sizes of drip trays for clamp on beer engines and fonts.

4” x 4” Drip Tray £1.60

6” x 6” Drip Tray £1.80

Masons have recently developed the beer pump door handle. Brass finish and durable acetal Handle.

Beer Pump Door Handle £89.00

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Bar-Equipment


25

Cask

Han

dlin

g

Cask Handling


All Harry Mason Equipment conforms to the statutory requirements for lifting equipment. The hooks are stamped with the safe working load and a serial number for complete traceability. Please ensure that the product is suitable for the required application. Please complete a risk assessment prior to use.

Barrel Carbine Hook £7.95

Galvanised Open Hook £17.50

Barrel Rope £19.50

The Barrel Rope is made from 3 Strand Polypropylene 24mm thick. Keep away from bleaching agents and industrial solvents. Breaking Strain is 7600kg.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Cask%20Handling


26

Cask

Han

dlin

g

Cask Handling


Cork Filled Drop Bag £43.00

Dray Pad 600x600x300 £96.50

Cellar Pad 1000x1000x300 £200.00

Harry Mason have two size of Dray Pad (see below), the interior is made from multiple foam and rubber, the exterior is a tough plastic that is easily cleaned with a damp cloth. They conform to the BLRA/ HSE approved Code of Practice.

The Cork Fill Drop Bag is tough and durable, the interior is filled with whole corks. The outer skin is a heavy duty woven recycled plastic fabric.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cellar-Equipment/Cask%20Handling


27

Cool

ing

Equi

pmen

t

Cooling Equipment


Pin Length Plastic Body £21.50

Firkin Length Plastic Body £22.50

Kilderkin Length Plastic Body £23.50

Plastic Cooling Probe £9.95

The cooling probe is designed for laydown dispense. After removing the shive from the side of the cask lower the cooling probe through the shive hole. Reseal using the cooling probe body and dispense via the cask tap normally. The cooling probe is ideal for out of cellar situations and can control the temperature of the cask.

Our basic competitive cooling probe is a plastic shive with a rigid plastic tube. John Guest 3/8 push in fittings are needed to connect to the cooling system.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cooling%20Equipment


28

Cool

ing

Equi

pmen

t

Cooling Equipment


Stainless Steel Pin £96.50

Stainless Steel Firkin £97.50

Stainless Steel Kilderkin £98.50

Harry Mason offer a complete stainless steel cooling probe, this is a lot more durable than our plastic alternatives. Installation of this cooling probe is different too, once you have removed the shive and lowered the cooling probe in, use the wings to tighten the seal to cask and then open the mini ball valve to vent the cask.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Cooling%20Equipment


29

Spar

es

Cylinders


Dispense Amount

Type of Unit With or WithOut Water Jacket

Price

¼ Pint Single Without £79.95

½ Pint Single Without £79.95

¼ Pint Single With £94.95

½ Pint Single With £94.95

¼ Pint Cabinet Without £79.95

½ Pint Cabinet Without £79.95

¼ Pint Cabinet With £94.95

½ Pint Cabinet With £94.95

Spare Cylinders are available for all Harry Mason beer engines. Clamp on or Cabinet, 1/4pt or

1/2pt and standard or water cooled.

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Spares/beer-dispense-cylinder


30

Spar

es

Handles


Handle Price

Black Ceramic Handle £9.90

Cream Ceramic Handle £9.90

Off White Ceramic Handle £9.90

White Ceramic Handle £9.90

Hunting Scene Ceramic Handle £13.25

Straight Black Handle £15.00

Straight Chrome Handle £24.95

Straight Black Handle Brass Rings £19.95

Straight Black Handle Chrome Rings £21.50

Wooden Truncheon Brass Ring £17.90

Wooden Truncheon Chrome Rings £19.95

Back to Front Page

http://www.harrymason.co.uk/Products-Cellar-equipment-beer-dispense/Spares/Handles


Harry Mason Ltd 217 Thimble Mill Lane Birmingham B7 5HS +44 (0) 121 328 5900 Dispensing Equipment...

Documents

Transcript of Harry Mason Ltd 217 Thimble Mill Lane Birmingham B7 5HS +44 (0) 121 328 5900 Dispensing Equipment...