Haridas Electrode & Flux Drying Oven Specification Sheet
Transcript of Haridas Electrode & Flux Drying Oven Specification Sheet
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 1/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
THE
PROBLEM
Welding electrodes are vulnerable to atmospheric moisture.Bound moisture in electrodes yields porous welds. As a result,
electrodes fuse slowly. The arc too, is not forceful and there isan attendant spatter .
The problem is severe with Hydrogen-controlled electrodes.These electrodes are essential for critical applications.Conventional electrodes used for such applications can causeunderbead cracking in the heat-affected-zone.
The low Hydrogen Iron powder type electrodes have greataffinity for adsorbing atmospheric moisture. The release ofHydrogen from the flux during welding is detrimental to the weldquality (bead) since it causes HYDROGEN EMBRITTLEMENT.
Manufacturers of electrodes specify desired temperature andtime for drying the electrodes prior to use.
Electrodes need to be maintained in a TOTALLY DRYCONDITION. The re-dried electrodes also need to be kept atan elevated temperature at the work point.
THE
NEED
One SINGLE SOURCE from where the right oven for the user isavailable.
Ovens that meet the temperature requirements
Ovens that meet the storage capacities Reliable ovens that work hour after hour, day after
day, year after year, with the same faithfulconsistency
Ovens that are user friendly Ovens that meet acceptable standards
THE
SOLUTION
Popular in India and abroad Result of persistent and painstaking development over
the last three decades
ELECTRODE DRYING OVENSFLUX DRYING OVENS
PORTABLE OVENS
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 2/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200
TECHNICAL SPECIFICATIONS HIEC 200
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x150
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 165 Watts
INPUT CURRENT 0.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz
AIR CIRCULATION Natural convection
TYPE OF CONTROL None
EQUIPMENT WEIGHT (approx) 4 Kg.
This model is also available with the following options :(i) Temperature indication – By a Bi-Metallic Dial Thermometer(ii) Input voltage - 24V AC, 60V AC or 110V AC(iii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 3/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:AC/DC
TECHNICAL SPECIFICATIONS HIEC 200 AC/DC
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x150
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 75 Watts
INPUT CURRENT 1 Amp
INPUT SUPPLY 80 Volts *
AIR CIRCULATION Natural convection
TYPE OF CONTROL None
EQUIPMENT WEIGHT (approx) 4 Kg.
* Used with welding machine “Output Terminal” and “Earth”
This model is also available with the following options :(i) Temperature indication – By a Bi-Metallic Dial Thermometer(ii) Input voltage - 60V(iii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 4/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:AC/DC:TSP
TECHNICAL SPECIFICATIONS HIEC 200 AC/DC TSP
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x275
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 75 Watts
INPUT CURRENT 1 Amp
INPUT SUPPLY 80 Volts *
AIR CIRCULATION Natural convection
TYPE OF CONTROLThermostatic(Range: 500-3000C)
EQUIPMENT WEIGHT (approx) 4 Kg.
* Used with welding machine “Output Terminal” and “Earth”
This model is also available with the following options :
(i) Temperature indication – By a Bi-Metallic Dial Thermometer(ii) Input voltage - 60V(iii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 5/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:ER
TECHNICAL SPECIFICATIONS HIEC 200 ER
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x275
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 165 Watts
INPUT CURRENT 0.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROL Energy Regulator (Variable time delay control)
EQUIPMENT WEIGHT (approx) 4.5 Kg.
This model is also available with the following options :(i) Temperature indication – By a Bi-Metallic Dial Thermometer(ii) Input voltage - 24V AC, 60V AC or 110V AC(iii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 6/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:TSP
TECHNICAL SPECIFICATIONS HIEC 200 TSP
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x275
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 165 Watts
INPUT CURRENT 0.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROLThermostatic(Range: 500-3000C)
EQUIPMENT WEIGHT (approx) 5 Kg.
This model is also available with the following options :(i) Temperature indication – By a Bi-Metallic Dial Thermometer
(ii) Input voltage - 24V AC, 60V AC or 110V AC(iii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 7/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:BDT
TECHNICAL SPECIFICATIONS HIEC 200 BDT
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x275
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 165 Watts
INPUT CURRENT 0.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROL None
TEMPERATURE INDICATION By a Bi-metallic Dial Thermometer
EQUIPMENT WEIGHT (approx) 5 Kg.
This model is also available with the following options :(i) Input voltage - 24V AC, 60V AC or 110V AC(ii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 8/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:200:DTC
TECHNICAL SPECIFICATIONS HIEC 200 DTC
OVERALL SIZE (mm) (Pkg.) (HxWxD) 690x190x275
WORKING SPACE (mm) (Dia. x Depth) 62 x 432
CAPACITY (approx) 2 Kg. (4.4 lbs)
TEMPERATURE RANGE Ambient - 2000 C (3920 F)
INPUT POWER 165 Watts
INPUT CURRENT 0.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROL Digital Indicating Temperature Controller
EQUIPMENT WEIGHT (approx) 5 Kg.
This model is also available with the following options :(i) Input voltage - 24V AC, 60V AC or 110V AC(ii) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 9/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:250:P
TECHNICAL SPECIFICATIONS HIEC 250 P
OVERALL SIZE (mm) (Pkg.) (HxWxD) 665x200x275
WORKING SPACE (mm) (Dia. x Depth) 80 x 445
CAPACITY (approx) 4 Kg. (8.8 lbs)
TEMPERATURE RANGE Ambient - 2500 C (4820 F)
INPUT POWER 500 Watts
INPUT CURRENT 2 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATIONNatural convection
TYPE OF CONTROL Thermostatic (Range:500-3000C)
EQUIPMENT WEIGHT (approx) 9 Kg.
This model is also available with the following options :(i) Temperature control – By Digital Controller(ii) Input voltage – Single : 24V AC, 60V AC or 110V AC(iii) Input voltage – Dual : 110/220 V AC(iv) Convenient removal of hot electrodes - With an electrode puller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 10/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
PORTABLE WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:250:H
TECHNICAL SPECIFICATIONS HIEC 250 H
WORKING SPACE (mm) 130x180x460 (HWD)
CAPACITY (approx) 8 Kg. (17 lbs.)
No. OF SHELVES Two
TEMPERATURE RANGE Ambient - 2500 C (4820 F)
INPUT POWER 1 kW
INPUT CURRENT 4.5 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz
AIR CIRCULATION Natural convection
TYPE OF CONTROLThermostatic(Range: 500-3000 C)
EQUIPMENT WEIGHT (approx) 17 Kg.
This model is also available with the following options :
(i) Temperature control – By Digital Controller
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 11/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:370:B (BABY OVEN)
TECHNICAL SPECIFICATIONS HIEC 370 B
WORKING SPACE (mm) 210 x 250 x 480 (HWD)
CAPACITY (approx) 18 Kg. (40 lbs.) of welding electrodes
No. OF SHELVES Two
TEMPERATURE RANGE Ambient - 3700 C (6980 F)
INPUT POWER 2.25 kW
INPUT CURRENT 9.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROLDigital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
Can Hold Upto
280 Electrodes
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 12/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:500:B (BABY OVEN)
TECHNICAL SPECIFICATIONS HIEC 500 B
WORKING SPACE (mm) 210 x 250 x 480 (HWD)
CAPACITY (approx) 18 Kg. (40 lbs.) of welding electrodes
No. OF SHELVES Two
TEMPERATURE RANGE Ambient - 5000 C (9320 F)
INPUT POWER 3 kW
INPUT CURRENT 13 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
AIR CIRCULATION Natural convection
TYPE OF CONTROLDigital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
Can Hold Upto
280 Electrodes
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 13/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:250:M
TECHNICAL SPECIFICATIONS HIEC 250 M
OVERALL SIZE (mm) (Pkg.) 685x455x625 (HWD)
WORKING SPACE (mm) 300x300x480 (HWD)
CAPACITY (approx) 15 Kg. (33 lbs.)
No. OF SHELVES Five
TEMPERATURE RANGE Ambient - 2500 C (4820 F)
INPUT POWER 1. 5 kW
INPUT CURRENT 6.5 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz
POWER SAVING Through 3-Heat Switch
AIR CIRCULATION Natural convection
TYPE OF CONTROLThermostatic(Range: 500-3000 C)
EQUIPMENT WEIGHT (approx) 52 Kg.
This model is also available with the following options :(i) Temperature control – By Digital Controller(ii) Temperature indication – By a Bi-Metallic Dial Thermometer
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 14/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:250:I
TECHNICAL SPECIFICATIONS HIEC 250 I
OVERALL SIZE (mm) (Pkg.) 825x610x610 (HWD)
WORKING SPACE (mm) 440x450x490 (HWD)
CAPACITY (approx) 25 Kg. (55 lbs.)
No. OF SHELVES Five
TEMPERATURE RANGEAmbient - 2500 C( 4820 F)
INPUT POWER 1.75 kW
INPUT CURRENT 7.5 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
POWER SAVING Through 3-Heat Switch
AIR CIRCULATION Natural convection
TYPE OF CONTROLThermostatic
(Range: 500-3000 C)
EQUIPMENT WEIGHT (approx) 79 Kg.
This model is also available with the following options :(i) Temperature control – By Digital Controller(ii) Temperature indication – By a Bi-Metallic Dial Thermometer
Also available incapacities ranging
from 50Kg. to 500Kg.(110 lbs. to 1100 lbs.)
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 15/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:370:II
TECHNICAL SPECIFICATIONS HIEC 370 II
OVERALL SIZE (mm) (Pkg.) 870x635x665 (HWD)
WORKING SPACE (mm) 440x450x490 (HWD)
CAPACITY (approx) 25 Kg. (55 lbs.)
No. OF SHELVES Five
TEMPERATURE RANGE Ambient - 3700 C (6980 F)
INPUT POWER 2.25 kW
INPUT CURRENT 9.7 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
POWER SAVING Through 3-Heat Switch
AIR CIRCULATION Natural convection
TYPE OF CONTROLDigital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
EQUIPMENT WEIGHT (approx) 98 Kg.
Also available incapacities ranging
from 50Kg. to 500Kg.(110 lbs. to 1100 lbs.)
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 16/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:500:III
TECHNICAL SPECIFICATIONS HIEC 500 III
OVERALL SIZE (mm) (Pkg.) 945x685x710 (HWD)
WORKING SPACE (mm) 440x450x490 (HWD)
CAPACITY (approx) 25 Kg. (55 lbs.)
No. OF SHELVES Five
TEMPERATURE RANGE Ambient - 5000 C (9320 F)
INPUT POWER 4.5 kW
INPUT CURRENT 19.3 Amps
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz.
POWER SAVING Through 3-Heat Switch
AIR CIRCULATION Natural convection
TYPE OF CONTROLDigital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
EQUIPMENT WEIGHT (approx) 128 Kg.
Also available incapacities ranging
from 50Kg. to 500Kg.(110 lbs. to 1100 lbs.)
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 17/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:400:E, 100Kg
TECHNICAL SPECIFICATIONS HIEC 400 E, 100Kg
WORKING SPACE (mm) 1000x650x500 (HWD)
CAPACITY (approx) 100 Kg. (220 lbs.) of welding electrodes
NUMBER OF TRAYS Ten
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 12 kW
INPUT CURRENT 17.2 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
POWER SAVING Through 3-Heat Switch
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor DRIVE Indirect drive, Electric Motor, 1 HP
WEIGHT (approx) 525 Kg.
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 18/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:400:E, 200 Kg
TECHNICAL SPECIFICATIONS HIEC 400 E, 200Kg
WORKING SPACE (mm) 1000 x 1070 x 500 (HWD)
CAPACITY (approx) 200 Kg. (440 lbs.) of welding electrodes
NUMBER OF TRAYS 8 + 8 (16 Nos in 2 Rows), Wiremesh
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 18 kW
INPUT CURRENT 25.8 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
DRIVE Indirect drive, Electric Motor, 1 HP
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 19/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
STATIONARY WELDING ELECTRODE DRYING OVEN
MODEL – HIEC:400:E, 500 Kg
TECHNICAL SPECIFICATIONS HIEC 400 E, 500Kg
WORKING SPACE (mm) 1350 x 1070 x 500 (HWD).
CAPACITY (approx) 500 Kg. (1100 lbs.) of weldingelectrodes
NUMBER OF TRAYS 15 + 15 (30 Nos in 2 Rows), Wiremesh
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 24 kW
INPUT CURRENT 34.4 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor
DRIVE Indirect drive, Electric Motor, 1½ HP
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 20/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
SUBMERGED ARC WELDING FLUX DRYING OVEN
MODEL – HIEC:400:F, 100 Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 F, 100Kg
OVERALL SIZE (mm) (Pkg.) 1675x1295x1040 (HWD)
WORKING SPACE (mm) 815x610x610 (HWD)
CAPACITY (approx) 100 Kg. (220 lbs.) of flux
NUMBER OF TRAYS Six
TRAY DIMENSION (mm) 75x600x600 (HWD)
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 12 kW
INPUT CURRENT 17.2 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
POWER SAVING Through 3-Heat Switch
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor DRIVE Indirect drive, Electric Motor, 1 HP
WEIGHT (approx) 475 Kg.
Also available in50 Kg. (110 lbs
capacity)
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 21/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
SUBMERGED ARC WELDING FLUX DRYING OVEN
MODEL – HIEC:400:F, 200 Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 F, 200Kg
WORKING SPACE (mm) 1066x780x800 (HWD)
CAPACITY (approx) 200 Kg. (440 lbs.) of flux
NUMBER OF TRAYS 8 + 8 (16 Nos in 2 Rows)
TRAY DIMENSION (mm) 75x350x780 (HWD)
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 18 kW
INPUT CURRENT 25.8 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor DRIVE Indirect drive, Electric Motor, 1 HP
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 22/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
SUBMERGED ARC WELDING FLUX DRYING OVEN
MODEL – HIEC:400:F, 500 Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 F, 500Kg
WORKING SPACE (mm) 1350x1070x830 (HWD)
CAPACITY (approx) 500 Kg. (1100 lbs.) of flux
NUMBER OF TRAYS 10 + 10 (20 Nos in 2 Rows)
TRAY DIMENSION (mm) 85x450x800 (HWD)
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
INPUT POWER 30 kW
INPUT CURRENT 43 Amps per phase
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
IR CIRCULATION Forced air
TYPE OF CONTROL Digital Controller (accuracy of ± 1% FSD) with
thermocouple sensor DRIVE Indirect drive, Electric Motor, 1½ HP
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 23/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
TOP LOADING SUBMERGED ARC WELDING FLUXDRYING OVEN
MODEL – HIEC:400:HF, 50Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 HF, 50Kg.
CAPACITY (approx) 50 Kg. (110 lbs.) of flux
INTERIOR Complete SS 304
EXTERIOR Mild Steel, powder coated.
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
TYPE OF CONTROL PID Controller with thermocouple sensor
BACK-UP TEMP. CONTROL
(SAFETY CONTROL)By a Digital Temperature Controller
INPUT SUPPLY 230/240 V, Single phase AC, 50 Hz
INPUT CURRENT 12.9 Amps
INPUT POWER 3 kW
FEATURES
• Complete SS 304 internal
construction.
• Flux loading from top,outlet at bottom – Easy &Safe handling of flux.
• Unique oven design saves50%-75% of power ascompared to tray typemodels.
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 24/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
FEATURES
• All surfaces in contact with the flux including the door, top surface,inner chamber and flux dispensing mechanism is fabricated out of thickSS 304 sheet. This prevents any contamination of flux and greatlyincreases oven service life.
• The inner chamber is specially designed to ensure that the ovendispenses flux smoothly and completely through the bottom valve.
• The heating system is designed such that the heaters are not in directcontact with the flux. This prevents overheating of flux and formationof slag due to flux melting.
• Heating of flux is uniform throughout the volume of the oven. Noformation of heat spots or places where the flux remains unbaked.Ensures that flux entering the welding system is 100% moisture free.
• PID controller accurately controls temperature of flux. Safety controllerprevents temperature shoot-up.
• Excellent insulation prevents heat loss and channels all heat inside thechamber.
• Powder coated exterior provides protection and improves aesthetics
TOP LOADING SUBMERGED
ARC WELDING FLUXDRYING OVEN
MODEL – HIEC:400:HF,50Kg. Capacity
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 25/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
TOP LOADING SUBMERGED ARC WELDING FLUXDRYING OVEN
MODEL – HIEC:400:HF, 100Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 HF, 100Kg.
CAPACITY (approx) 100 Kg. (220 lbs.) of flux
INTERIOR Complete SS 304
EXTERIOR Mild Steel, powder coated.
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
TYPE OF CONTROL PID Controller with thermocouple sensor
BACK-UP TEMP. CONTROL
(SAFETY CONTROL)
By a Digital Temperature Controller
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
INPUT CURRENT 8.6 Amps / Phase
INPUT POWER 6 kW
FEATURES
• Complete SS 304 internalconstruction.
• Flux loading from top,outlet at bottom – Easy &Safe handling of flux.
• Unique oven design saves50%-75% of power ascompared to tray typemodels.
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 26/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
FEATURES
• All surfaces in contact with the flux including the door, top surface,inner chamber and flux dispensing mechanism is fabricated out of thickSS 304 sheet. This prevents any contamination of flux and greatlyincreases oven service life.
• The inner chamber is specially designed to ensure that the ovendispenses flux smoothly and completely through the bottom valve.
• The heating system is designed such that the heaters are not in directcontact with the flux. This prevents overheating of flux and formationof slag due to flux melting.
• Heating of flux is uniform throughout the volume of the oven. Noformation of heat spots or places where the flux remains unbaked.Ensures that flux entering the welding system is 100% moisture free.
• PID controller accurately controls temperature of flux. Safety controllerprevents temperature shoot-up.
• Excellent insulation prevents heat loss and channels all heat inside thechamber.
• Powder coated exterior provides protection and improves aesthetics
TOP LOADING SUBMERGEDARC WELDING FLUX
DRYING OVEN
MODEL – HIEC:400:HF,
100Kg. Capacity
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 27/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
(An ISO 9001:2008 Company)Sector-23, Plot No.76, CIDCO Service Industrial Area, Turbhe, Navi Mumbai-400 705, Maharashtra, India.
Tel : 91-022-27833046, 27835042 Fax : 91-022-27835042 email : [email protected] url: http:// www.haridasinstruments.com
Product Specification Sheet
TOP LOADING SUBMERGED ARC WELDING FLUXDRYING OVEN
MODEL – HIEC:400:HF, 300Kg. Capacity
TECHNICAL SPECIFICATIONS HIEC 400 HF, 300Kg.
CAPACITY (approx) 300 Kg. (660 lbs.) of flux
INTERIOR Complete SS 304
EXTERIOR Mild Steel, powder coated.
TEMPERATURE RANGE Ambient - 4000 C (7520 F)
TYPE OF CONTROL PID Controller with thermocouple sensor
BACK-UP TEMP. CONTROL
(SAFETY CONTROL)By a Digital Temperature Controller
INPUT SUPPLY 415 V, Three phase AC, 50 Hz
INPUT CURRENT 17.2 Amps / Phase
INPUT POWER 12 kW
This model is also available with the following options :(i) Temperature control – By Profile controller with Ramp, Soak features(ii) Audio-visual alarms.
FEATURES
• Complete SS 304 internalconstruction.
• Flux loading from top,
outlet at bottom – Easy &Safe handling of flux.
• Unique oven design saves50%-75% of power ascompared to tray typemodels.
7/23/2019 Haridas Electrode & Flux Drying Oven Specification Sheet
http://slidepdf.com/reader/full/haridas-electrode-flux-drying-oven-specification-sheet 28/28
HARIDAS INSTRUMENTS & EQUIPMENTS CO.
Product Specification Sheet
FEATURES
• All surfaces in contact with the flux including the door, top surface,inner chamber and flux dispensing mechanism is fabricated out of thickSS 304 sheet. This prevents any contamination of flux and greatlyincreases oven service life.
• The inner chamber is specially designed to ensure that the ovendispenses flux smoothly and completely through the bottom valve.
• The heating system is designed such that the heaters are not in directcontact with the flux. This prevents overheating of flux and formationof slag due to flux melting.
• Heating of flux is uniform throughout the volume of the oven. Noformation of heat spots or places where the flux remains unbaked.Ensures that flux entering the welding system is 100% moisture free.
• PID controller accurately controls temperature of flux. Safety controllerprevents temperature shoot-up.
• Excellent insulation prevents heat loss and channels all heat inside thechamber.
• Powder coated exterior provides protection and improves aesthetics
TOP LOADING SUBMERGEDARC WELDING FLUX
DRYING OVEN
MODEL – HIEC:400:HF,
300Kg. Capacity