Hardware Solutions - Akara
Transcript of Hardware Solutions - Akara
Fittings for purpose
®
Hardware SolutionsOctober 2004
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for rigid assembly systems Hi-Lo™ screw
• Hi-Lo screws have a twin thread for faster insertion
• Hi threads and Lo threads combine to give excellent pull
out in chipboard
• Funnel head design means no countersinking
• Steel is case hardened for extra strength
1
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
3 – 9 5 – – – – – 5 –
3 – 9 5 – – – – – 5 –
3 – 9 5 – – – – – 5 –
3 – 9 5 – – – – – 5 –
3 50 9 5 7.5/8 – – – – 5 –
3.75 42 30 5 7.5/8 – – – – 5.5 –
3.75 50 40 7 7.5/8 2.0 13 – – 5.5 –
3 50 9 5 7.5/8 – – – – 5 –
3 50 9 5 7.5/8 – – – – 5 –
3 – 9 5 – – – – – 5 –
3 45 9 5 7.5/8 – – – – 5 –
3.75 45 30 5 7.5/8 – – – – 5.5 –
3.75 45 30 5 7.5/8 – – – – 5.5 –
Part No Description
00062
00066
00068
00071
00077
00084
00097
00171
00172
06074
06077
06080
06081
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
Hi-Lo
S
S
S
S
S
S
S
S
S
S
S
S
S
V
V
V
V
V
V
V
V
V
V
V
V
V
4x24 Funnel (No 8)
4x19 Funnel (No 8)
4x28 Funnel (No 8)
4x28 Funnel (No 8)
4x45 Funnel (No 8)
5x47 Funnel (No 11)
5x57 Funnel (No 11)
4x45 Funnel (No 8)
4x55 Funnel (No 8)
4x38 Funnel (No 8)
4x50 Funnel (No 8)
5x50 Funnel (No 11)
5x50 Funnel (No 11)
– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –
Connectors 1Hardware Solutions
00097 *
* decorative head
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for rigid assembly systems Double-locking assembly screw + cap
• High performance from widely spaced primary thread
• Finer secondary thread provides additional holding power
• Increased support for vertical panel is gained from the
funnel head with collar at its base
• One-piece fitting
2
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
5 15/16 30 7.0/7.5 – – – – – – –
– – – – – – – – – – –
Part No Description
00180
01042
––
Z
P
N
V
Double-locking screw 6x42
Cover Cap
– – –– – ✓ –
Connectors 1Hardware Solutions
0018001042
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for rigid assembly systems Barrel nut/Screw cap
• Flexible head provides added drilling tolerance
• Durable plastic material is flexible providing greater
holding power
• High performance achieved when used in low density
chipboard
• Used with Hi-Lo screws for optimum degrees of strength
3
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – – – – –
– – – – – – – – – – –
12 7.5/8 11 – – – – – – – –
12 7.5/8 11 – – – – – – – –
Part No Description
01020
01042
01054
01056
––––
P
P
P
P
V
V
V
V
Cap 13 (No 2 pozi)
Cap 13 (No 3 hex)
Barrel Nut headed (5/No11)
Barrel Nut headed (4/No8)
– – ✓
– – ✓
– – ✓
– – ✓
Connectors 1Hardware Solutions
0105401056
01020 01042
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for face-boring applicationsConcealed fittings
• Combination of hi-thread screw and nylon insert allows a
high clamping force improving cabinet rigidity
• Unlimited stacking height due to flush housing
• Provides a strong, secure fitting which eliminates the
need for edge boring
• 1mm either side from hole centre is absorbed improving
consumer confidence
4
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – – – – –
– – – – – – – – – – –
25 12 11 – – – – – – – –
– – – 10 6 12 – – – – –
25 12 11 – – – – – – – –
Part No Description
01709
01732
02046
02526
02985
Hi
––––
S
P
P,S
P
P
Z
V
V
V
V
Screw panhead (No8x17.6)
Cover Cap
Housing assembly (+01709)
Insert (10x11.5)
Housing (no nose)
– – –– – ✓ ✓
– ✓ –– – ✓ –– – ✓ –
Connectors 2Hardware Solutions
02046 02985
02526 01709
01732
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for face-boring applicationsConcealed fittings
• Range of fixing blocks for multiple applications
• Face drilling only required
• Durable plastic material is flexible providing greater
holding power
• Choose screw fastening or hammer insertion
5
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – – – – –
10 10 10.5 10 – 16 – – – – –
– 10 – – 10 – – – – – –
– – – 10 6 12 – – – – –
3 7 – 3 5 – – – – – –
Part No Description
01709
02075
02077
02526
06073
Hi
––––
S
P
P
P
P
V
V
V
N
V
Assembly screw No8x17.6
Rail fastener
Rail fastener
Insert
Modesty block
– – –– – ✓ –✓ – – –– ✓ – –– ✓ – –
Connectors 2Hardware Solutions
02526 01709
02075
02077 02077
02075
06073
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fasteners for face and edge boring Concealed housing/Snapfix™
• One turn locking system reduces assembly time, both in
the factory and home
• Pre-assembly feature for consumer convenience
• Decorative cap for excellent concealment
• Shallow version for 12mm panels
6
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
25 A1-A2+A3 12.5 * – – * – – 7 –
25 A1-A2+A3 11 * – – * – – 7 –
– – – – – – – – – – –
Part No Description
03118
03121
03150
–––
P
P
P
V
V
V
Full depth hsg assy (0116)
Shallow hsg assy (0114)
Half-moon cap
– – ✓ –– ✓ –– – ✓
Connectors 3Hardware Solutions
03121 03118
03150
* depends on board thickness
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fasteners for face and edge boring Dowel
• One turn locking system reduces assembly time, both in
the factory and home
• Pre-assembly feature for consumer convenience
• Choice of dowels to suit drilling
• Hi-Lo screw feature for faster insertion
7
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – 3 7 25 – – – – –
– – – 5 7 30 – – – – –
– – – 3 7 9 – – – – –
– – – 3.75 7 30 – – – – –
– – – 3 7 9 – – – – –
Part No Description
03090
03168
03180
03181
03190
Hi
Euro
Hi-Lo
Hi-Lo
Hi
S
Z
S
S
S
V
N
Z
V
V
4x25 Screw dowel (No 8)
Screw dowel
Screw dowel (4/No 8)
Screw dowel (5/No 11)
Screw dowel (4/No 8)
– – –– – –– – –– – –– – –
Connectors 3Hardware Solutions
03168
0318003181
0309003190
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for face-boring onlyFlushbloc™/Flushfix™
• One piece connector range
• The Angledriv screw provides high levels of
tolerance, increasing consumer confidence
• Face drilling only required
• Corner joint and shelf fixing options
8
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– 4.5 – 5 – 13 – – – – –
– 4.5 – 5 – 13 – – – – –
25 4.5 11 – 12 – – – – – –
25 4.5 11 5 12 13 – – – – –
– 4.5 – 10 13 13 – – – – –
– 4.5 – 10 – 13 – – – – –
25 4.5 11 – 12 – – – – – –
25 4.5 11 5 – 13 – – – – –
PartNo
Description
00021
00022
02161
02164
02172
02182
02190
02193
Euro
Euro
Euro
Euro
Euro
Euro
Euro
Euro
Z
Z
P
Z,P
P
P
P
Z,P
N
N
V
V
N
N
V
V
Angledriv screw t/start(unthumped)
Angledriv screw t/start(thumped)
Flushfix 25x10.5
Flushbloc assembled (+00022)
Insert single-start
Insert twin-start
Flushbloc
Flushbloc assy + ret(00022)
– – –– – –– – ✓ –– ✓ –– – ✓ –– – ✓ –– ✓ –– ✓ –
Connectors 4Hardware Solutions
02190*0216402193*
02161
0002100022
0217202182
* Not available in USA / Canada
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Fittings for face-boring onlyMinibloc™/Twinbloc™
• One piece connector range
• Face drilling only required
• Easy to use, foolproof home insertion
• Angledriv screw tolerates good levels of inaccurate
drilling increasing consumer confidence
9
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – 13 5 – – – –
– – – – – 13 5 – – – –
10 11 9.5 – 6 – 5 – – – –
10 11 10.5 – 6 – 5 – – – –
10 11 11 – 6 10.5 5 – – – –
10 11 9.5 – 6 10.5 5 – – – –
10 11 11 – 6 – – – – – –
10 11 11 – 6 10.5 5 – – – –
8 11 9.5 – 6 – – – – – –
8 11 9.5 – 6 13 5 – – – –
PartNo
Description
00022
00021
02101
02107
02120
02121
02130
02139
02141
02144
Euro
Euro
––
Euro
Euro
–Euro
Euro
Euro
Z
Z
P
P
Z,P
Z,P
P
Z,P
P
Z,P
N
N
V
V
V
V
V
V
V
V
Angledriv screw t/start (thumped)
Angledriv screw t/start
Minibloc (10x9.5)
Minibloc
Minibloc assembly
Minibloc assembly
Twinbloc 32CRS
Twinbloc assy
Minibloc
Minibloc assembly
– – –– – –– – ✓ –– – ✓ –– – ✓ –– ✓ –– ✓ –– ✓ –– – ✓ –– ✓ –
Connectors 4Hardware Solutions
02101*02107*
0212002121021410215302144
0213902130
0002100022
32
* Not available in UK / Europe
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
High strength connectorsContract fix™ system
• High performance fastener
• Thread design gives repeatability
• Multi-drive recess
• Higher than average pull up
10
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
15 7.5/9 12.5/14 – – – – – – – –
15 7.5/9 12.5/14 – – – – – – – –
– – – 7.8 34 – – – – – –
9 – 13.5 – – – – – – – –
Part No Description
05917
05960
05971
02175
M10
–M6x9.5
M6
Z
Z
V
Z
N
N
Z
V
Housing+multi g/screw
Housing Cylinder 15x12
Dowel 7x34
Insert Ø9x13 (6 hex)
– – ✓
– – – ✓
– – –– – –
Connectors 7Hardware Solutions
05917
05960 0597102175
02175
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
General fasteners No-tools Backfix and Trimfix™
• Push-in insertion into panel
• No tools required to lock the backfix panels together
• The handle on backfix acts as a stop during locking,
providing greater accuracy and speed of insertion
• Barbs on the backfix provide a quality fastener for
rigid cabinet construction
11
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– 10 5 – – 4/4.4 – – – – –
– – – – – 13 – – – – –
12 9MIN 10 – 3/3.5 6 – – – – –
Part No Description
01370
01709
02154
–Hi
–
V
S
Z
V
V
N
Trimfix
Screw No 8x17.6 Pan
Hardboard backfix
– ✓ – ✓
– – –– – – ✓
Connectors 20Hardware Solutions
01370
01370
D1
B
B1
ØA x D
02154
01709
02154
02154
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Drawer solutions 17mm drawer slide
• Runners are paired in one piece moulding
• The guide rail steers the drawer and reduces
jamming risk
• Integral drawer stop and hole plugs
• Manufactured in HDPE to provide a smooth glide
action
12
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
8 96 9 5 32 9 16 192 288 6 80
8 96 9 5 32 9 16 192 288 6 80
8 96 9 5 32 9 16 192 288 6 80
PartNo
Description
05179
05184
05201
–––
P
P
P
V
V
V
17mm slide pair 192 (Europe)
17mm slide pair 288 (Europe)
17mm slide pair 288 (USA)
– – ✓ ✓
– – ✓ ✓
– – ✓ ✓
Drawers 10Hardware Solutions
A A1
Ø
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Drawer solutions Drawer front adjuster (DFA)
• Multi-direction adjustment
• Locking screw to fasten
• Independent of drawer system
• One piece housing
13
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
19 – – 9 – – – – – – –
19 – – 9 – – – – – – –
19 – – 9 – – – – – – –
Part No Description
06308
06309
06310
3.5 (no6)
UNC8-32
M4
P
Z,P
Z,P
V
V
V
DFA Housing
DFA Housing
DFA Housing
– – ✓ –– – ✓ –– – ✓ –
Drawers 10Hardware Solutions
063080630906310
Before After
A
B
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Wardrobe/Closet solutionsSoft-open Shoe Rack
• Smooth open-close mechanism
• Wheel runners provide a simple and smooth
operation
• Teeth provide a ratchet action slowing down the
opening and closing
• Webbing design feature protects children from
trapping fingers
14
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
5 – 12 – – – – – – – –
6 160 16 5 128 12 27.5 32 192 56 96
6 160 16 5 128 12 27.5 32 192 56 96
PartNo
Description
00016
08052
08054
Euro
––
V
P
P
Z
V
V
Euroscrew 6x16 (4 reqd)
Shoe-rack
Shoe-rack
– – –– ✓ – ✓
– ✓ – ✓
Storage 25Hardware Solutions
08054 set 08052 set
A3
B2
BB1
A2
to back of door
D3
D2
side panel door panel00019
08054 08052
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Hinge solutions Glass door hinge
• Hinge, grub screws and mountings are supplied
as a kit
• One piece moulding
• The closed end on the hinge provides a fool proof
location of hinge to edge of glass
• All plastic design is safer in contact with glass
15
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – – – – –
– 11 – 9 16 – 10 – – – –
9 8.5 7 – 10 – – – – – –
– – – – – – – – – – –
9 8.5 7 – – – – – – – –
PartNo
Description
04009
04171
04253
04258
04266
–––––
P
P
P
P
P
N
V
V
V
V
Hinge adhesive pad (2 reqd)
Pivot bracket
Hinge Assembly set-closed (2)
Handle+plate for magentic catch
Kit (04253,) 04009, 04258
– – – ✓
– ✓ – ✓
– – ✓
– – – ✓
– – – ✓
Connectors 16Hardware Solutions
04253
4-5mm glass
04171
04258
04253
04253
x 2
04171
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Hinge solutions Hold-shut glass door hinge
• Hold feature keeps door in closed position
• The grub screws have flange to prevent over-
screwing resulting in an accurate fit every time
• No requirement for an adhesive pad
• Kit of parts is ordered as a single part number
16
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
9 – 9 – – – – – – – –
– – – – – – 5 – 10.5 – –
– – – 5 – 10.5 – – – – –
9 – – – – – – – – – –
– – – – – – – – – – –
9 – 10.5 – – – – – – – –
– – see above – – – – – – – –
– – see above – – – – – – – –
PartNo
Description
04276
04278
04283
04285
04287
04319
04452
04460
––––––––
P
P
P
P
P
P
P
P
V
V
V
V
V
V
V
V
Hold-shut GDH set (3-4mm)
Adjustable door stop
Handle & door stop set
Hold-shut GDH accessory set
Pad for handle (3-4mm)
Hold-shut GDH set (5mm)
Bagged set for 3-4mm glass
Bagged set for 5mm glass
– ✓ – ✓
– ✓ – ✓
– ✓ – –– ✓ – ✓
– – – ✓
– ✓ – ✓
– ✓ – ✓
– ✓ – ✓
Connectors 16Hardware Solutions
04283
04285
open
closed
+
+
+
04276 (3-4mm glass)04319 (5mm glass)
x 2
x 4
04278
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Adjustable cabinet leg rangeAdjustable leg, extension and foot
• Legs are supplied assembled at a pre-set height
• Wide adjustment range to fit all common plinth
heights
• Jacking point adjustment feature
• Simple push on design to sockets
17
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– 92-157 – – 24 – – – – – –
– – – – 38.5 – – – – – –
– 60-90 – – 24 – – – – – –
– 50 – – 24 – – – – – –
– 110-180 – – 24 – – – – – –
– 92.5-150 – – 24 – – – – – –
Part No Description
02549
02569
02570
02571
02653
02666
––––––
P
P
P
P
P
P
V
V
V
V
V
V
Adjustable leg
Fixed foot
Adjustable leg
Leg extension
Adjustable leg
Adjustable leg
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
Suspension 17Hardware Solutions
B
B10254902666
02571
02569
0257002653
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Adjustable cabinet leg range Leg top fixes
• Choice of dowel or screw on sockets
• Shared leg cabinet socket provides additional
support when used in shared mounting applications
• Extra support clip feature
• Invert second clip for corner plinth fixing
18
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
12 – 12.5 32 34 – – – – – –
3 64x64 6 32 21 – – 38.5 – – –
3 64x65 6 32 21 – – 38.5 – – –
10 64x66 12.5 32 21 – – 38.5 – – –
Part No Description
02562
02575
02579
02582
––––
P
P
P
P
V
V
V
V
Shared leg cabinet fix
Bloc 38 (4xscrew)
Bloc 38 (4xscrew)+lip
Bloc 38 (4xdowel)+lip
– ✓ –– – –– – – –– – ✓ –
Suspension 17Hardware Solutions
025750258202579
02562
02562
025750258202579
02562
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Adjustable cabinet leg rangePlinth clips and fox clip
• Groove design eliminates the need for drilling and
fits into any position on plinth
• The screw in version can sit in variable
plinth positions
• The self adhesive version does not require any
machine work, but plinth can be fitted onsite for
customisation
• The reversible fitting to leg provides alignment when
taking plinth around the corner
19
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – 4 – – –
– 4 7 – 24 – – 32 – – –
– 4 7 – 38.5 – – 32 – – –
– – – – 24 – – 21 – – –
– – – – 24 – – 32 – – –
PartNo
Description
01373
02523
02578
02581
02634
–––––
P
P
P
P
P
N
V
V
V
V
Plinth fix
Plinth clip 24 - screw/knock-on
Plinth clip 38 - screw/knock-on
Stick-on plinth clip
Plinth clip 24 - screw on
– – – ✓
– ✓ ✓ –– ✓ ✓ –– ✓ – ✓
– ✓ – –
Suspension 17Hardware Solutions
01373
02523 02578
02578
0252302578025580258002581
02578025230263402581
0137302581 02578
02634
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Adjustable cabinet leg range Leg top fixes
• Lip provides additional support to end panel and
gives extra strength
• Cam and socket have different diameter fixed holes
eliminating the possibility of incorrect assembly
• The side fix has twin dowel mounting for
positive location
• Rivet fix design gives quick fastening of socket
20
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
– – – – – – – – – – –
10 32 11 – 32 – – – – – –
10 34x34 12.5 – 24 – – – – – –
– 34x34 – – 24 – – – – – –
15 34x34 12.5 – 24 – – – – – –
15 34x34 12.5 – 24 – – – – – –
15 32 12.5 – 32 – – – – – –
Part No Description
01709
02556
02558
02559
02560
02630
02663
Hi
––––––
S
P
P
P
P
P
P
Z
V
V
V
V
V
V
Screw No8x17.6 Pan
Side fix
Socket fix (dowel)
Socket fix (screw)
Rivet fix/skid
Rivet fix (heavy-duty)
Rivet fix/skid
– – –– ✓ ✓ –– ✓ –– ✓ – –– ✓ ✓ –– ✓ ✓ –– ✓ ✓ –
Suspension 17Hardware Solutions
02560 02558
02556 (no dowels)
02630
02559
02663
02556
0255802559025600263002663
Please note: Due to varying manufacturing tolerances, Titus recommends a trial production run and through product testing of all system
hardware before final production runs commence. Titus reserves the right to change technical specifications without prior notice.
®
Shelf solutions Shelf support/retainer
• Hold down feature traps the shelf in place
for security
• Folding design allows the shelf to be post mounted
in an assembled cabinet
• To suit a wide range of shelf thickness
• Pad for metal shelf support when using glass
21
Z – Zinc S – Steel P – Plastic V – Various Z,P – Zinc/Plastic N – Natural
A B D A1 B1 D1 A2 B2 D2 A3 D3
5 1.5 8.5 – – – 32 – – – –
5 1.5 8 – 19 – 32 – – – –
5 1.5 8.5 – – – 32 – – – –
5 1.5 6 – 12.7 – 32 – – – –
5 1.5 6 – 16 – 32 – – – –
5 1.5 6 – 19 – 32 – – – –
5 1.5 8 – 15 – 32 – – – –
5 1.5 8 – 16 – 32 – – – –
5 1.5 8 – 19 – 32 – – – –
PartNo
Description
01820
01822
01825
01826
01828
01829
01837
01838
01843
–––––––––
P
P
Z
P
P
P
P
P
P
V
V
N
V
V
V
V
V
V
Shelf support
Shelf holddown
Shelf support
Shelf support ret (12mm board)
Shelf support ret (16mm board)
Shelf support ret (19mm board)
Shelf support ret (15mm board)
Shelf support ret (16mm board)
Shelf support ret (19mm board)
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
– – – ✓
Suspension 17Hardware Solutions
018260182801829
018320183701843
005000182501820
01818
01822
MLHW/001/E/0704
Titus International PlcRidgeway Industrial Estate
Iver, Buckinghamshire SL0 9HW
United Kingdom
Tel +44 (0)1753 778278Fax +44 (0)1753 778225Website www.titusint.comE-mail [email protected]
Fittings for purpose
®
Your Distributor For Titus Products:
POLANDTitus Polska Sp.z o.o.ul.Powstañców Wielkopolskich 110PL-62-002 Suchy Las/ PoznañPoland
Tel +48 (0)61 811-56-84Fax +48 (0)61 811-54-02
UKTitus Tool Company Ltd.Ridgeway Industrial EstateIver, Buckinghamshire SL0 9HWUnited KingdomTel +44 (0)1753 654680Fax +44 (0)1753 655254
SCANDINAVIATitus Tool Company Ltd. Verkstadsgatan 1BS-39239, KalmarSweden
Tel +46 (0)480 12800Fax +46 (0)480 59050
THE AMERICASTitus Tool Co. Inc.22020 72nd Avenue SouthKent, WA 98032USATel:800 762 1616 toll freeTel +1 253 872 2829Fax +1 253 872 2827
CENTRAL EUROPETitus-Beschläge GmbH &Co.KGSundernkamp 19D-32130 EngerGermanyTel +49 (0)5224 976-100Fax +49 (0)5224 976-350
ASIA/PACIFICTitus Tool Co. Pte. Ltd.39 Changi South Avenue 2Singapore 486352
Tel +(0)65 6383 3922Fax +(0)65 6383 3178
CZECH REPUBLICCesky Titus s.r.o.Statek 1CZ-338 21 Osek u RokycanTschechien / Czech Republic
Tel +420 (0)371 72 55 75Fax +420 (0)181 72 73 41
´