Hardware for Sliding Doors (Timber) - Spinea Oy · Hardware for Sliding Doors (Timber) Catalogue:...
Transcript of Hardware for Sliding Doors (Timber) - Spinea Oy · Hardware for Sliding Doors (Timber) Catalogue:...
Hardware for Sliding Doors (Timber)
Catalogue: TEH_02H
2TEH_02H/02.2014
2
Hardware for Sliding Doors (Timber)Contents
HELM 50
General Information Page 18
HELM 50 up to 40 kg leaf weight Page 20
Appendix
Technical Specifications Page 72
Sample of Request for Proposal Page 74
Enquiry Form Page 75
Accessories
Flush and Pull Handles Page 68
HELM 53
General Information Page 24
HELM 53 up to 50 kg leaf weight Page 26
Information
Introduction Page 3
HELM Hardware for Timber Sliding Doors Page 4
HELM Accessories Page 8
HELM 73
General Information Page 24
HELM 73 up to 80 kg leaf weight Page 34
HELM 120
General Information Page 50
HELM 120 up to 120 kg leaf weight Page 52
HELM 150
General Information Page 50
HELM 150 up to 170 kg leaf weight Page 60
HELM Modular.Concept 80
General Information Page 10
HELM Hardware Modules Page 12
HELM 85
General Information Page 44
HELM 85 up to 90 kg leaf weight Page 46
Gen
eral
Info
rmat
ion
TEH_02H/02.20143
Hardware for Sliding Doors (Timber)General Information
Introduction
The HELM range comprises all hardware solutions from lightweight sliding doors to leaf weights of 170 kg. The hardware is primarily used for timber leaves, it can, however, also be employed for sliding leaves of metal or plastic. For the use of all glass doors we refer to the respective separate catalogue.
The hardware excels at precise rolls, simple mounting and high-quality workmanship. The HELM hardware is, of course, tested according to DIN 1527:1998.
For the medium and most common range of applications (sliding doors of 30-80 kg) the Modular.Concept 80 has been developed (pages 10-17). By means of only one track system and various accessory modules all applications can be covered in a simple manner. The hardware HELM 120 and HELM 150 (from page 50) make the range perfect in the upper weight classes and can also be used outdoors as all components are made of non-corroding materials.
On the pages 4-7 you will find an overview of all hardware and fields of application.
4TEH_02H/02.2014
4
Hardware for Sliding Doors (Timber)Overview Hardware
Har
dw
are
Ove
rvie
w
TEH_02H/02.20145
HELM 50 HELM 53 HELM 73 HELM 85 HELM 120/120 B HELM 150/150 B
Leaf weight 40 kg 50 kg 80 kg 90 kg 120 kg 170 kg
Mounting Type:
ceiling mounting ● ● ● ● ● ●wall mounting ● ● ● ● ● ●Directwall mounting1 ○ ● ● ● ○ ○
Field of Application:
residential ● ● ● ● ● ●commercial ○ ○ ● ● ● ●Type of Door:
single leaf and multiple leaf
● ● ● ● ● ●
synchronised ○ ○ ● ● ● ●telescopic ○ ○ ● ○ ● ●damper and soft closing device types:
damper and soft closing device
○ ○ ● ○ ○ ○
door catcher ● ● ● ● ● ●Track Surface:
natural finish ● ● ● ○ ○ ○silver anodised ○ ● ● ● ● ●stainless steel finish anodised
○ ● ● ○ ○ ○
Pelmetting
pelmet ○ ● ● ●2 ● ●
● = yes ○= no 1track drilled on the side 2pelmet integrated in the track system
Overview
Hardware for Sliding Doors (Timber)Overview Hardware
6TEH_02H/02.2014
6
Further information from page 24
HELM 53 up to 50 kg leaf weight
Trackaluminium natural finish, silver anodised or stainless steel finishanodised, with drilled holes for ceiling mounting in stock lengths of6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting• clip-on pelmet
HELM 50 up to 40 kg leaf weight
Trackaluminium natural finish, with drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting
Further information from page 18
HELM 73 up to 80 kg leaf weight
Trackaluminium natural finish, silver anodised or stainless steel finishanodised, with drilled holes for ceiling mounting in stock lengths of6000 mm or cut to size
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• low headroom installation• mounting options: ceiling mounting and wall mounting• clip-on pelmet• SmartStop• telescopic fitting• synchronised opening
Further information from page 24
Hardware for Sliding Doors (Timber)Overview Hardware
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998200,000 cycles
use ofSmartStop
possible
Har
dw
are
Ove
rvie
w
TEH_02H/02.20147
HELM 120 up to 120 kg leaf weight
Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet• telescopic fitting• synchronised opening
HELM 85 up to 90 kg leaf weight
Trackaluminium silver anodised, with drilled holes for wall orceiling mounting in stock lengths of 6000 mm or cut to size
Special featureenclosed track system: consisting of track, pelmet, end caps and plastic strip
Trolley double roller, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• synchronised opening
Further information from page 44
Further information from page 50
HELM 150 up to 170 kg leaf weight
Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet• telescopic fitting• synchronised opening
Further information from page 50
Hardware for Sliding Doors (Timber)Overview Hardware
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998100,000 cycles
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
8TEH_02H/02.2014
Clip-on pelmet for HELM 53 and HELM 73
Clip-on aluminium pelmetting ensures an attractive look wherever HELM hardware is used. In case of the types silver anodised and stainless steel finish anodised the pelmets are simply clipped on the outer face of the profile.
Product advantages• simple mounting• pelmetting on one or both sides possible
Further information from page 16
SmartStop for HELM 73
We put an end to sliding leaves that close noisily and bounce back. Thanks to our SmartStop for the use on one or both sides we stop each door and pull it noiselessly into the final position.
This piece of hardware makes sure that closed leaves remain closed.
Product advantages• door is slowed down towards the stop positions and pulled into the final position. • gentle, quiet and comfortable closing• slowing down can be effected on one or both sides• mounting in the track profile• employed air cylinder is maintenance-free• door is held in the stop positions, thus an additional door catcher is not required
Further information from page 39
Hardware for Sliding Doors (Timber)Accessories
HELMatic for HELM 73, HELM 120 and HELM 150
HELMatic moves doorsThe new generation of drives for HELM 73, HELM 120 and HELM 150
With the HELMatic 230-volt drive sliding doors and light sliding gates up to 150 kg door weight can be opened and closed fully automatically. With wireless push-button, motion detector as well as comfortable push&go function, every sliding door can be operated without effort using the HELMatic. In case of power failure the door can be pushed open manually.
The HELMatic was rated with the test result "good" in the user text of the "Deutsche Gesellschaft für Gerontotechnik® (GGT)" (German service company for gerontological technology) and is certified according to DIN EN 186520-2 - low energy operation.
HELMatic 230 volt drive
Motion detector
Acc
esso
ries
9TEH_02H/02.2014
HELM projection track for pelmetting
The projection track for pelmetting has to be combined with the track for ceiling mounting. Distances as frames or baseboards can be easily leveled. Easy assembly with enclosed screws.
Product advantages• complete system including pelmet in same appearance• easy installation
Further information from page 14
HELM spacer profile
The spacer profile is used to extend distances to the wall when there are frames or baseboards. Wooden substructions are no longer required. This simplifies the installation and makes a more attactive look.
Product advantages• no substructions necessary• easy installation
Further information from page 14
Pull handles and flush handles
You will find the suitable pull models for timber sliding doors on the pages 68 - 71 as well as in the KWS catalogues.
Further information from page 68
Hardware for Sliding Doors (Timber)Accessories
10TEH_02H/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
HEL
M M
od
ula
r.Co
nce
pt
80
11TEH_02H/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
Sliding doors of timber can be used in a wide range of contexts in both living and working environments.
As well as their traditional application as normal doors for rooms, they are increasingly being used as room dividers. Regardless of whether they are used to separate kitchen areas, walk-in wardrobes or as part of office partitions, the possibilities are numerous, and therefore the range of corresponding fitting systems are so versatile.
For this reason HELM has developed the compact yet flexible Modular.Concept 80. The use of just one track system with a range of accessory modules enables us to respond to different individual requirements.
From simple single timber doors up to the double door systems with panels of glass weighing 80 kg and synchronised opening a wide range of applications can be delivered quickly and easily.
The Modular.Concept 80 is based on our tried and tested HELM 53 and HELM 73 fittings which have been continuously developed over many years and which now have been improved by the addition of some important components (SmartStop, pelmets, synchronised operation, stainless steel finish etc.).
The following list shows all available modules. Depending on the relevant application and requirements, fittings systems for timber and glass doors can be compiled from this selection.
- multiple applications for timber doors, single or double door, wall, ceiling and wall pocket assembly, pelmets, projection tracks, HELM SmartStop, low headroom installation and synchronised opening and closing
- modular structure: simple price calculation, quick delivery times, compact range of stock and at the same time a wide range of different applications
- additional accessories can be easily added later
- wide range of KWS flush and pull handles
The idea
The advantages
12TEH_02H/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
Part no.aluminium natural finish
Part no.aluminium silver anodised
Part no.stainless steel finish anodised
for door widths of 500-700 mmtrack lenght 1300 mm
006031 006061 006036
for door widths of 710-900 mmtrack lenght 1700 mm
006032 006062 006037
for door widths of 910-1100 mmtrack lenght 2100 mm
006033 006063 006038
for door widths of 1110-1300 mmtrack lenght 2500 mm
006034 006064 006039
for door widths of 1310-1600 mmtrack lenght 3100 mm
006035 006065 006040
stock lenght 6000 mm 006050 006051 006054
Part no.aluminium natural finish
Part no.aluminium silver anodised
for door widths of 500-700 mmtrack lenght 1300 mm
00604601 00604701
for door widths of 710-900 mmtrack lenght 1700 mm
00604602 00604702
for door widths of 910-1100 mmtrack lenght 2100 mm
00604603 00604703
for door widths of 1110-1300 mmtrack lenght 2500 mm
00604604 00604704
for door widths of 1310-1600 mmtrack lenght 3100 mm
00604605 00604705
stock lenght 6000 mm 00604600 00604700
Part no.aluminium silver anodised
2 end caps 006003
HELM track no. 60 - for wall mounting with lateral drilled holes
HELM end caps - usable with HELM track no. 60
HELM track no. 60 - für ceiling mounting and for receiving the wall mounting bracket with drilled holes
These tracks are used in case of wall mounting in combination with the clip-on pelmet.
HEL
M M
od
ula
r.Co
nce
pt
80
13TEH_02H/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
HELM accessories: wall mounting brackets, pocket door kids and projection tracks
Description Part no.
1 (no.) wall mounting bracket 61/01 006161
4 (nos.) wall mounting bracket 61/01 1300 mm 006163
6 (nos.) wall mounting bracket 61/01 1700 mm 006164
7 (nos.) wall mounting bracket 61/01 2100 mm 006165
8 (nos.) wall mounting bracket 61/01 2500 mm 006166
10 (nos.) wall mounting bracket 61/01 3100 mm 006167
Description Part no.
1 kit contains:x universal mounting brackets(please specify according to your track length)1 bottom guide no. 70,1 latch screw
4 universal mounting brackets no. 73 for 1300 mm 006173
6 universal mounting brackets no. 73 for 1700 mm 006174
7 universal mounting brackets no. 73 for 2100 mm 006175
8 universal mounting brackets no. 73 for 2500 mm 006176
10 universal mounting brackets no. 73 for 3100 mm 006177
Description Part no.
1 projection track, 1300 mm long for door widths of 500-700 mm
00601660
1 projection track, 1700 mm longfor door widths of 710-900 mm
00601760
1 projection track, 2100 mm longfor door widths of 910-1100 mm
00602160
1 projection track, 2500 mm longfor door widths of 1110-1300 mm
00602560
2 end caps for projection track 006001
1 projection track, 6000 mm stock length 00601060
1 projection track, cut to length, per metre 00601160
Description Part no.
1 projection track, 1300 mm long for door widths of 500-700 mm
00602760
1 projection track, 1700 mm longfor door widths of 710-900 mm
00602860
1 projection track, 2100 mm longfor door widths of 910-1100 mm
00602960
1 projection track, 2500 mm longfor door widths of 1110-1300 mm
00603060
2 end caps for projection track 006002
1 projection track, 6000 mm stock length 00601460
1 projection track, cut to length, per metre 00601560
HELM wall mounting bracket sets
This kit is for use in conjunction with the HELM 73 soffit fix track
Track in timber or glass door applications
HELM kits for pocket door installation
Aluminium (silver anodised)
Supplied complete with screws and washers
Inter lengths and lengths from 2500 mm are avai -lable as dimension lengths (Part no. 00601560)
The projection track is installed with the soffit fix track no. 60 silver anodised
HELM projection track
Aluminium (stainless steel finish ano-dised)
Supplied complete with screws and washers
Interlengths and lengths from 2500 mm are available as dimension lengths (Part no. 00601560)
The projection track is installed with the soffit fix track no. 60stainless steel finish anodised
HELM projection track
14TEH_02H/02.2014
Description Part no.
2 end caps silver anodised, timber pelmets (51 x 76 x 2,5 mm)
006352
2 end caps, stainless steel finish anodisedtimber pelmets (51 x 76 x 2,5 mm)
006332
Description Part no.
2 end caps silver anodised, timber pelmets (66 x 76 x 2,5 mm)
006353
2 end caps, stainless steel finish anodisedtimber pelmets (66 x 76 x 2,5 mm)
006333
Description Part no.
1 projection track, 6000 mm stock length 006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Description Part no.
1 projection track, 6000 mm stock length 006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Description Part no.
1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metresilver anodised
0063799
1 spacer profile, 6000 mm stock length, stainless steel finish anodised
006390
1 spacer profile, cut length per metre stainless steel finish anodised
0063999
HELM mounting parts: wall mounting bracket sets, complementary sets for pocket door installation and projection tracks
Description Part no.
2 end caps silver anodised, timber pelmets (56,5 x 65 x 2,5 mm)
006372
2 end caps, stainless steel finish anodisedtimber pelmets (56,5 x 65 x 2,5 mm)
006373
Description Part no.
2 end caps silver anodised, glas pelmets (72 x 91,5 x 2,5 mm)
006374
2 end caps, stainless steel finish anodisedglas pelmets (72 x 91,5 x 2,5 mm)
006375
HELM Modular.Concept 80up to 80 kg leaf weight
for timber pelmets
in connection with spacer profile
for timber pelmets
HELM end cap for projection track
HELM end cap for projection track
aluminium silver anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
aluminium stainless steel finish anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
HELM projection track for pelmetting
HELM projection track for pelmetting
aluminium
The spacer profile is used in combination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile
for timber pelmets
for clip on pelmet
in connection with HELM 73 synchronised (please see instal-lation drawing on page 43)
HELM end cap for spacer profile
HELM end cap for spacer profile double sided
HEL
M M
od
ula
r.Co
nce
pt
80
15TEH_02H/02.2014
HELM Modul.Konzept 80up to 80 kg leaf weight
HELM 53
HELM 73
HELM 73 ME
HELM 73 Synchron
for single leaf timber sliding doors up to 50 kg leaf weight and door thickness from 20 mm
trolleys with plain bearings
for single leaf timber sliding doors up to 80 kg leaf weight and door thickness from 20 mm
trolleys with ball bearings
for single leaf timber sliding doors with low headroom installation up to 80 kg leaf weight and door thickness from 30 mm
trolleys with ball bearings
for double timber sliding doors synchronised up to 80 kg leaf weight and door thickness from 20 mm with tooth belt deflection
trolleys with ball bearings
Accessories for timber door applications
More accessories from page 16
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
tested according to DIN 1527:1998 200.000 cycles
tested according to DIN 1527:1998 200.000 cycles
tested according to DIN 1527:1998 200.000 cycles
tested according to DIN 1527:1998 200.000 cycles
Description Part no.
2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214
In case of double doors2 sets are necessary.
005361
Description Part no.
2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214
In case of double doors2 sets are necessary.
007361
Description Part no.
2 trolleys no. 732 flanges no. 73 V2 door catchers no. 65 P1 bottom guide no. 216
In case of double doors2 sets are necessary.
007362
Description Part no.
4 trolleys no. 73 with flange4 door catchers no. 65 P2 bottom guide no. 2142 deflection rollers1 tooth belt connector timber1 tooth belt clamp timber
007380
1 tooth belt (not includedin the kit) per metercalculation: tooth belt length =2 x track length + 120 mm
000110017001
65
40
2,5
16TEH_02H/02.2014
Aluminium (silver anodised)
The pelmet is installed on single side in side mounted or on both sides in soffit mounted installations. Matching end caps availab-le to suit application.
For wall mounting we re-commend track and spacer profile no. 60 pre-drilled for side fixing. (Wall mounting brackets are not required)
Clip-on pelmet Description Part no.1 clip-on pelmet, 1300 mmfor door widths of 500-700 mmsilver anodised
00606701
1 clip-on pelmet, 1700 mmfor door widths of 710-900 mmsilver anodised
00606702
1 clip-on pelmet, 2100 mmfor door widths of 910-1100 mmsilver anodised
00606703
1 clip-on pelmet, 2500 mmfor door widths of 1110-1300 mmsilver anodised
00606704
1 clip-on pelmet,stock length silver anodised 006066
1 clip-on pelmet,cut length silver anodised 006067
2 end caps for the one-sided pelmet 65 x 40 mm silver anodised 006072
2 end caps for the two-sided pelmet 65 x 53 mm silver anodised 006073
HELM modification set
Part no.
2 flanges no. 73 V1 bottom guide no. 216
In case of double doors2 sets are necessary.cannot be combined withsynchronised deflection.
007363
tested according to DIN 1527:1998 200.000 cycles
SmartStopmit
verwendbar
for single leaf timber sliding doors with low headroom installation up to 80 kg leaf weight and door thickness from 30 mm
suitable for the retroactive modification of the standard HELM 73 timber sets.
HELM modification set 73
HELM Modular.Concept 80 Accessories
Door piston
door piston for pocket door installation
Description Part no.
1 piece door pistonstainless steel / plastic
006180
Damper and soft closing device suitable for max. door weight 80 kg. Suitable only for use with HELM 73
HELM SmartStop Description Part no.1 SmartStop1 0073501 upgrade-kit for installation on one end of the track contents:1 SmartStop and 2 trolley no. 73 without flange
007351
1 upgrade-kit for installation of both ends of the track contents:2 SmartStop and 2 trolley no. 73 without flange
007352
tested according to DIN 1527:1998 200.000 cycles
HELM accessories
91,5
65
40
2,5
HEL
M M
od
ula
r.Co
nce
pt
80
17TEH_02H/02.2014
HELM Modular.Concept 80Accessories
More accessories, flush and pull handles, from page 68
HELM accessories
Aluminium (stainless steel finish anodised)
The pelmet is installed on one side in side mounted or on both sides in soffit mounted installations. Matching end caps availab-le to suit application.
For wall mounting we re-commend track and spacer profile no. 60 pre-drilled for side fixing. (Wall mounting brackets are not required)
Clip-on pelmet Description Part no.1 clip-on pelmet, 1300 mmfor door widths of 500-700 mmstainless steel finish anodised
00606901
1 clip-on pelmet, 1700 mmfor door widths of 710-900 mmstainless steel finish anodised
00606902
1 clip-on pelmet, 2100 mmfor door widths of 910-1100 mmstainless steel finish anodised
00606903
1 clip-on pelmet, 2500 mmfor door widths of 1110-1300 mmstainless steel finish anodised
00606904
1 clip-on pelmet,stock length stainless steel finish anodised 006068
1 clip-on pelmet,cut length stainless steel finish anodised 006069
2 end caps for one-sidedpelmetting 65 x 40 mmstainless steel finish anodised
006074
2 end caps for both-sidedpelmetting 65 x 53 mmstainless steel finish anodised
006075
Aluminium silver anodised
in stock lengths of 6000 mm or cut to size
this pelmet can be used with synchronised double doors (please see installati-on drawing on page 43)
Aluminium stainless steel finish anodised
in stock lengths of 6000 mm or cut to size
this pelmet can be used with synchronised double doors ( please see installati-on drawing on page 43)
Clip on pelmet Description Part no.
1 clip on pelmet, 1300 mm long 00607701
1 clip on pelmet, 1700 mm long 00607702
1 clip on pelmet, 2100 mm long 00607703
1 clip on pelmet, 2500 mm long 00607704
1 clip on pelmet, 6000 mm long stock length
006076
1 clip on pelmet,cut to length, per metre
006077
Description Part no.
1 clip on pelmet, 1300 mm long 00607901
1 clip on pelmet, 1700 mm long 00607902
1 clip on pelmet, 2100 mm long 00607903
1 clip on pelmet, 2500 mm long 00607904
1 clip on pelmet, 6000 mm long stock length
006078
1 clip on pelmet,cut to length, per metre
006079
18TEH_02H/02.2014
HELM 50up to 40 kg leaf weight
HEL
M 5
0
19TEH_02H/02.2014
HELM 50up to 40 kg leaf weight
Further information from page 20
HELM 50
up to 40 kg leaf weight
Track aluminium natural finish, with drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting tested according to
DIN 1527: 1998100,000 cycles
1
5
24 3
20TEH_02H/02.2014
HELM 50up to 40 kg leaf weight
1 track no. 502 trolleys no. 56 with flange2 door catchers no. 50 P1 bottom guide no. 214with x wall mounting brackets
Part no.
1 track no. 50, 1300 mmfor door widths of 500-700 mm5 wall mounting brackets no. 50
005010
1 track no. 50, 1700 mmfor door widths of 710-900 mm6 wall mounting brackets no. 50
005011
1 track no. 50, 1900 mmfor door widths of 910-1100 mm7 wall mounting brackets no. 50
005012
1 track no. 50, 2150 mmfor door widths of 1010-1200 mm7 wall mounting brackets no. 50
005013
1 track no. 50, 2700 mmfor door widths of 1210-1500 mm9 wall mounting brackets no. 50
005014
1 track no. 50, 3300 mmfor door widths of 1510-1800 mm11 wall mounting brackets no. 50
005015
Part no.1 track no. 50, 1300 mmfor door widths of 500-700 mm
00501002
1 track no. 50, 1700 mmfor door widths of 710-900 mm
00501102
1 track no. 50, 1900 mmfor door widths of 910-1100 mm
00501202
1 track no. 50, 2150 mmfor door widths of 1010-1200 mm
00501302
1 track no. 50, 2700 mmfor door widths of 1210-1500 mm
00501402
1 track no. 50, 3300 mmfor door widths of 1510-1800 mm
00501502
1 track no. 502 trolleys no. 56 with flange2 door catchers no. 50 P1 bottom guide no. 214without wall mounting bracket
Hardware kit
HEL
M 5
0
21TEH_02H/02.2014
HELM 50up to 40 kg leaf weight
More accessories, flush and pull handles, from page 68
Part no.
stock length 005050
cut length 005051in stock lengths of 6000 mm or cut to size, for ceiling mounting, aluminium natural finish, drilled approx. every 300 to 350 mm
Part no.
zinc-plated 005060with bolt, zinc-plated
Part no.
plastic 005660
double pair, with flange, support screw zinc-plated
Part no.
zinc-plated 005080catch spring zinc-plated
Part no.
plastic 021461plastic, white
Track no. 50
Wall mounting bracket no. 50
Door catcher no. 50 P
Bottom guide no. 214
Trolley no. 56
1
2
4
5
3
27
63+6
10,5
20
40
8
20
5
24,5
17+6
26,5
19,6
10,5
20
40
8
20
5
24,5
27
28,6
45,6+6
17+6
5
1
3
4
5
2
3
1
4
22TEH_02H/02.2014
HELM 50Technical Specifications
Track no. 50Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 005050 – – 21
cut length 005051 – – 21
Trolley no. 56 Part no. Page
plastic 005660 21
Door catcher no. 50 P Part no. Page
zinc-plated 005080 21
Bottom guide no. 214 Part no. Page
plastic 021461 21
HELM 50 – Wall mounting, with wall mounting bracket no. 50
Track no. 50Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 005050 – – 21
cut length 005051 – – 21
Attachments Part no. Page
Wall mounting bracket no 50, zinc-plated 005060 21
Trolley no. 56 Part no. Page
plastic 005660 21
Door catcher no. 50 P Part no. Page
zinc-plated 005080 21
Bottom guide no. 214 Part no. Page
plastic 021461 21
1
1
3
2
4
3
5
4
5
HELM 50 – ceiling mounting
HEL
M 5
0
23TEH_02H/02.2014
24TEH_02H/02.2014
HELM 53 and HELM 73
HEL
M 5
3 an
d H
ELM
73
25TEH_02H/02.2014
HELM 53 and 73
Further information from page 26
HELM 53
up to 50 kg leaf weight
Track aluminium natural finish, silver anodised or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet
Further information from page 32
HELM 73
up to 80 kg leaf weight
Track aluminium natural finish, silver anodised or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• low headroom installation• mounting options: ceiling mounting and wall mounting• clip-on pelmet• SmartStop• telescopic fitting• synchronised opening
use ofSmartStop
possible
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998200,000 cycles
14 3 2
5
26TEH_02H/02.2014
HELM 53up to 50 kg leaf weight
1 track no. 60, silver anodised2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214with x wall mounting brackets 61/01
Part no.
1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm4 wall mounting brackets no. 60/01
0053100
1 track no. 60, natural colour, 1700 mmfor door widths of 710-900 mm6 wall mounting brackets no. 60/01
0053110
1 track no. 60, natural colour, 2100 mmfor door widths of 910-1100 mm7 wall mounting brackets no. 60/01
0053120
1 track no. 60, natural colour, 2500 mmfor door widths of 1110-1300 mm8 wall mounting brackets no. 60/01
0053130
Part no.1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm
005310020
1 track no. 60, natural colour, 1700 mmfor door widths of 710-900 mm
005311020
1 track no. 60, natural colour, 2100 mmfor door widths of 910-1100 mm
005312020
1 track no. 60, natural colour, 2500 mmfor door widths of 1110-1300 mm
005313020
1 track no. 60, silver anodised2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214without wall mounting brackets 61/01
Hardware kit
HEL
M 5
3
27TEH_02H/02.2014
HELM 53up to 50 kg leaf weight
More accessories for HELM 53 from page 28
wall mounting bracket no. 61/01 with integral bolt, zinc-plated
Mounting parts Part no.
zinc-plated 006161
Part no.
zinc-plated 006162
ceiling plate no. 61/02with integral bolt, zinc-plated
zinc-plated/plastic
Part no.
zinc-plated/plastic 006500Door catcher no. 65 P
Part no.
plastic 021461plastic, white
Bottom guide no. 214
Part no.
plastic 005360
double pair with plastic plain bearing, roller body black, with flange, support screw zinc-plated
Trolley no. 53
Track no. 60
in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled approx. every 300 to 350 mm
Part no.
stock length natural finish 006050
cut length natural finish 006052
stock length silver anodised 006051
cut length silver anodised 006053
stock length stainless steel finish anodised 006054
cut length stainless steel finish anodised 006058
Part no.
stock length natural finish, drilled holes on the side 0060460
cut length natural finish, drilled holes on the side 00604611
stock length silver anodised, drilled holes on the side 00604700
cut length silver anodised, drilled holes on the side 00604710
in stock lengths of 6000 mm or cut to size, for ceiling mounting with drilled holes on the side
2
4
5
3
1
65
40
2,5
28TEH_02H/02.2014
HELM 53Accessories
Accessories for HELM 53
HELM projection track
aluminium silver anodisedor stainless steel finish anodised
with screw set and washers
The projection track is used in combination with the track no. 60 with drilled holes for ceiling mounting.
Part no.
2 end caps silver anodised 006001
stock length 6000 mm silver anodised
00601060
cut length silver anodised 00601160
2 end caps stainless steel finish anodised 006002
stock length 6000 mm stainless steel finish anodised
00601460
cut length stainless steel finish anodised 00601560
aluminium silver anodisedor stainless steel finish anodised
in stock lengths of 6000 mm or cut to size
The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.
Clip-on pelmet Part no.
1 clip-on pelmet,stock length 6000 mm silver anodised
006066
1 clip-on pelmet,cut length silver anodised
006067
2 end caps for the one-sided pelmet 65 x 40 mm silver anodised
006072
2 end caps for the two-sided pelmet 65 x 53 mm silver anodised
006073
1 clip-on pelmet,stock length 6000 mm stainless steel finish anodised
006068
1 clip-on pelmet,cut length stainless steel finish anodised
006069
2 end caps for one-sidedpelmetting 65 x 40 mmstainless steel finish anodised
006074
2 end caps for both-sidedpelmetting 65 x 53 mmstainless steel finish anodised
006075
HELM projection track for pelmetting
HELM projection track for pelmetting
aluminium silver anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
aluminium stainless steel finish anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
Part no.1 projection track, 6000 mm stock length
006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Part no.
1 projection track, 6000 mm stock length
006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
More accessories for HELM 53 from page 29
6
7
8
HEL
M 5
3
29TEH_02H/02.2014
Door piston
door piston for pocket door installation
Part no.
1 piece door pistonstainless steel / plastic 006180
More accessories, flush and pull handles, from page 68
HELM 53Accessories
Accessories for HELM 53
for timber pelmets51 x 76 x 2,5 mm
in connection with spacer profile
for timber pelmets66 x 76 x 2,5 mm
HELM end cap for projection track
HELM end cap for projection track
for timber pelmets, 56,5 x 65 x 2,5 mm
HELM end cap for spacer profile
aluminium
The spacer profile is used in combination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile
Part no.
2 end caps silver anodised 006352
2 end caps, stainless steel finish anodised
006332
Part no.
2 end caps silver anodised 006353
2 end caps, stainless steel finish anodised
006333
Part no.1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metresilver anodised
0063799
1 spacer profile, 6000 mm stock length, steel finish anodised
006390
1 spacer profile, cut length per metre stainless steel finish anodised
0063999
Part no.
2 end caps silver anodised 006372
2 end caps, stainless steel finish anodised
006373
Further accessories
9
24,5
5
8
20
31
42
33,3
18+10 65
5
4,5
20
40
67
19
10,5
16,6
10,5
18+10
68+10
20
40
8
20
5
24,5
4,5
31
2
1
4
3
5
1
6
3
4
5
30TEH_02H/02.2014
HELM 53Technical Specifications
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length 006050 006051 006054 27
cut length 006052 006053 006058 27
Wall mounting bracket no. 61/01 Part no. Page
zinc-plated 006161 27
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
1
2
3
4
5
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length 006050 006051 006054 27
cut length 006052 006053 006058 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
2x1 clip on pelmet, stock length – 006066 006068 28
2x1 clip on pelmet, cut length – 006067 006069 28
2 end caps, double-sided – 006073 006075 28
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 27
cut length, drilled holes on the side 00604611 00604710 – 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 28
1 clip on pelmet, cut length – 006067 006069 28
2 end caps, one-sided – 006072 006074 28
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
1
6
3
4
5
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 27
cut length, drilled holes on the side 00604611 00604710 – 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 28
1 clip on pelmet, cut length – 006067 006069 28
2 end caps, one-sided – 006372 006373 29
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 spacer profile, stock length – 006370 006390 29
1 spacer profile, cut length – 0063799 0063999 29
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
HELM 53 – Wall mounting, with wall mounting bracket no. 61/01
HELM 53 – Wall mounting, track with drilled holes on the side and one-sided pelmetting
31
5
67
40
8
20
24,5
5
235
1557
10,5
10,5
65
42,3
5
13
20
1,8
24,5
5
8
20
31
67
20
40
65
53
18+10
33,3
55
10,5
1
6
5
6
3
4
1
9
5
6
3
4
HEL
M 5
3
31TEH_02H/02.2014
HELM 53Technical Specifications
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length 006050 006051 006054 27
cut length 006052 006053 006058 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
2x1 clip on pelmet, stock length – 006066 006068 28
2x1 clip on pelmet, cut length – 006067 006069 28
2 end caps, double-sided – 006073 006075 28
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
1
6
3
4
5
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 27
cut length, drilled holes on the side 00604611 00604710 – 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 28
1 clip on pelmet, cut length – 006067 006069 28
2 end caps, one-sided – 006372 006373 29
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 spacer profile, stock length – 006370 006390 29
1 spacer profile, cut length – 0063799 0063999 29
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
1
6
9
3
4
5
HELM 53 – Ceiling mounting, with double-sided pelmetting
HELM 53 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting
51,5
55
76
40
8
20
24,5
5
235
65
20
10,5
13
47,6
5
9,5 31
8
14
6
3
5
32TEH_02H/02.2014
HELM 53Technical Specifications
HELM 53 – Wall mounting (with projection track and pelmetting)
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 27
cut length 006052 006053 006058 27
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 28
1 clip on pelmet, cut length – 006067 006069 28
Projection trackPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 Projection track, stock length – 006350 – 28
1 Projection track, cut length – 0063599 – 28
1 Srew set - 006351 28
2 End caps – 006352 006332 29
Trolley no. 53 Part no. Page
plastic 005360 27
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 27
Bottom guide no. 214 Part no. Page
plastic 021461 27
1
6
8
3
4
5
HEL
M 5
3
33TEH_02H/02.2014
14 3 2
5
34TEH_02H/02.2014
HELM 73up to 80 kg leaf weight
1 track no. 60, silver anodised2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214with x wall mounting brackets 61/01
Part no.
1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm4 wall mounting brackets no. 61/01
0073100
1 track no. 60 natural colour, 1700 mmfor door widths of 710-900 mm6 wall mounting brackets no. 61/01
0073110
1 track no. 60 natural colour, 2100 mmfor door widths of 910-1100 mm7 wall mounting brackets no. 61/01
0073120
1 track no. 60 natural colour, 2500 mmfor door widths of 1110-1300 mm8 wall mounting brackets no. 61/01
0073130
1 track no. 60 natural colour, 3100 mmfor door widths of 1310-1600 mm10 wall mounting brackets no. 61/01
0073140
1 track no. 60 natural colour, 3700 mmfor door widths of 1610-1900 mm12 wall mounting brackets no. 61/01
0073150
Part no.1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm
007310020
1 track no. 60 natural colour, 1700 mmfor door widths of 710-900 mm
007311020
1 track no. 60 natural colour, 2100 mmfor door widths of 910-1100 mm
007312020
1 track no. 60 natural colour, 2500 mmfor door widths of 1110-1300 mm
007313020
1 track no. 60 natural colour, 3100 mmfor door widths of 1310-1600 mm
007314020
1 track no. 60 natural colour, 3700 mmfor door widths of 1610-1900 mm
007315020
1 track no. 60, silver anodised2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214without wall mounting brackets 61/01
Hardware kit
HEL
M 7
3
35TEH_02H/02.2014
HELM 73up to 80 kg leaf weight
More accessories for HELM 73 from page 36
Part no.
plastic 007360
double pair with ball bearing, roller body white, with flange, support screw zinc-plated
Trolley no. 73
wall mounting bracket no. 61/01 with integral bolt, zinc-plated
Mounting parts Part no.
zinc-plated 006161
Part no.
zinc-plated 006162
ceiling plate no. 61/02with integral bolt, zinc-plated
zinc-plated, plastic
Part no.
zinc-plated/plastic 006500Door catcher no. 65 P
Part no.
plastic 021461plastic, white
Bottom guide no. 214
Track no. 60
in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled approx. every 300-350 mm
Part no.
stock length natural finish 006050
cut length natural finish 006052
stock length silver anodised 006051
cut length silver anodised 006053
stock length stainless steel finish anodised 006054
cut length stainless steel finish anodised 006058
Part no.stock length natural finish, drilled holes on the side 0060460
cut length natural finish, drilled holes on the side 00604611
stock length silver anodised, drilled holes on the side 00604700
cut length silver anodised, drilled holes on the side 00604710
in stock lengths of 6000 mm or cut to size, for ceiling mounting with drilled holes on the side
3
2
4
5
1
65
40
2,5
36TEH_02H/02.2014
Accessories for HELM hardware 73
HELM projection track
aluminium silver anodisedor stainless steel finish anodised
with screw set and washers
The projection track is used in combination with the track no. 60 with drilled holes for ceiling mounting.
Part no.
2 end caps for projection tracksilver anodised
006001
stock length 6000 mm silver anodised
00601060
cut length silver anodised 00601160
2 end caps for projection trackstainless steel finish anodised
006002
stock length 6000 mm stainless steel finish anodised
00601460
cut length stainless steel finish anodised 00601560
aluminium silver anodisedor stainless steel finish anodised
in stock lengths of 6000 mm or cut to size
The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.
Clip-on pelmet Part no.
1 clip-on pelmet,stock length 6000 mm silver anodised
006066
1 clip-on pelmet,cut length silver anodised
006067
2 end caps for the one-sided pelmet 65 x 40 mm silver anodised
006072
2 end caps for the two-sided pelmet 65 x 53 mm silver anodised
006073
1 clip-on pelmet,stock length 6000 mm stainless steel finish anodised
006068
1 clip-on pelmet,cut length stainless steel finish anodised
006069
2 end caps for one-sidedpelmetting 65 x 40 mmstainless steel finish anodised
006074
2 end caps for both-sidedpelmetting 65 x 53 mmstainless steel finish anodised
006075
for single leaf timber sliding doors with low headroom installation up to 80 kg leaf weight and door thickness from 30 mm
trolleys with ball bearings
HELM 73 ME Part no.
2 trolleys no. 732 flanges no. 73 V2 door catchers no. 65 P1 bottom guide no. 216
In case of double doors2 sets are necessary.
007362
HELM 73Accessories
Part no.
kit for double doors synchronised 007380
4 trolleys no. 73 m with guide4 door catchers no. 65 P4 bottom guides no. 2142 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
Synchronised
Part no.
tooth belt, sold by metre 000110017001
Calculation for synchronised: tooth belt length =2 x track length + 120 mm
sold by metre, black
Tooth belt
for double, timber sliding doors synchronised up to 80 kg leaf weight and door thickness from 20 mm with tooth belt deflection
Single components for double doors synchronised
6
9
10
7
8
91,5
HEL
M 7
3
37TEH_02H/02.2014
HELM 73Accessories
HELM 73Accessories
Single components for double doors synchronised
More accessories, for telescopic hardware, from page 38
Aluminium silver anodised
in stock lengths of 6000 mm or cut to size
this pelmet can be used with synchronised double doors (please see installati-on drawing on page 43)
Aluminium stainless steel finish anodised
in stock lengths of 6000 mm or cut to size
this pelmet can be used with synchronised double doors (please see installati-on drawing on page 43)
Clip on pelmet Part no.
1 clip on pelmet, 1300 mm long 00607701
1 clip on pelmet, 1700 mm long 00607702
1 clip on pelmet, 2100 mm long 00607703
1 clip on pelmet, 2500 mm long 00607704
1 clip on pelmet, 6000 mm long stock length
006076
1 clip on pelmet,cut to length, per metre
006077
Part no.
1 clip on pelmet, 1300 mm long 00607901
1 clip on pelmet, 1700 mm long 00607902
1 clip on pelmet, 2100 mm long 00607903
1 clip on pelmet, 2500 mm long 00607904
1 clip on pelmet, 6000 mm long stock length
006078
1 clip on pelmet,cut to length, per metre
006079
Single components for telescopic hardware
accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)
Telescopic fitting no. 73 Part no.
kit for double telescopic hardware:2 deflection rollers1 door driver1 connector1 coupling joint for tooth belt
006602
kit for three-leaf telescopic hardware:2 deflection rollers2 door drivers1 connector2 deflection rollers for driver1 coupling joint for tooth belt1 door driver for deflection roller
006603
Part no.
plastic 007359
double pair with ball bearing, roller body white, with flange, support screw M8x50 zinc-plated
Trolley no. 73
11
13
12
38TEH_02H/02.2014
HELM 73Accessories
Single components for telescopic hardware
HELM projection track for pelmetting
HELM projection track for pelmetting
aluminium silver anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
aluminium stainless steel finish anodised
The projection track is used in combination with track no. 60 with holes for ceiling mounting.
Part no.1 projection track, 6000 mm stock length
006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Part no.
1 projection track, 6000 mm stock length
006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Part no.
tooth belt, sold by metre 000110017001
Calculation for telescopic: tooth belt length =2 x leaf length + 400 mm
sold by metre, blackAttention: In case of three-leaf installations two tooth belts are required!
Tooth belt
HELM Projection track, spacer profile and end caps
More accessories, flush and pull handles, from page 68
Part no.
plastic 031661bottom guide, plastic, suitable for bottom guide track no. 340
Guide glide no. 316 S
Part no.
stock length natural finish 034041
cut length natural finish 034042
stock length silver anodised 034043
cut length silver anodised 034044
stock length stainless steel finish anodised
034036
cut length stainless steel finish anodised 034037
Aluminium natural finish, Aluminium silver anodised oder stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght
U-Track no. 340
with mounting bracket, stainless steelL = 45 mm or L = 85 mm,adjustable, suitable for bot-tom guide track no. 340
Guide glide no. 316 S Part no.
L = 45 mm 031662
L = 85 mm 031663
18
14
15
16
17
39TEH_02H/02.2014
HELM 73Accessories
for timber pelmets51 x 76 x 2,5 mm
in connection with spacer profile
for timber pelmets66 x 76 x 2,5 mm
HELM end cap for projection track
HELM end cap for projection track
for timber pelmets, 56,5 x 65 x 2,5 mm
HELM end cap for spacer profile
aluminium
The spacer profile is used in combination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile
Part no.
2 end caps silver anodised 006352
2 end caps, stainless steel finish anodised
006332
Part no.
2 end caps silver anodised 006353
2 end caps, stainless steel finish anodised
006333
Part no.1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metresilver anodised
0063799
1 spacer profile, 6000 mm stock length, stainless steel finish anodised
006390
1 spacer profile, cut length per metre stainless steel finish anodised
0063999
Part no.
2 end caps silver anodised 006372
2 end caps, stainless steel finish anodised
006373
Accessories for HELM 53
for clip on pelmet 72 x 91,5 x 2,5 mm
in connection with HELM 73 synchronised
HELM end cap for spacer profile
Part no.
2 end caps silver anodised 006374
2 end caps, stainless steel finish anodised
006375
More accessories
damper and soft closing device integrated in the track up to 80 kg leaf weight
SmartStop Part no.
1 piece SmartStop 007350
1 upgrade kit one-sided with1 SmartStop and 1 trolley 73 without guide
007351
1 upgrade kit one-sided with2 SmartStops and 2 trolleys 73 without guide
007352
Door piston
door piston for pocket door installation
Part no.
1 piece door pistonstainless steel / plastic
006180
tested according to DIN 1527:1998 200.000 cycles
19
24,5
5
8
20
40
20
10,5
68+10
16,631
18+10
2
1
4
3
5
3142
33,3
18+10 65 67
40
20
5
4,5
8
20
24,5
519
1
6
3
4
5
40TEH_02H/02.2014
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 35
cut length, drilled holes on the side 00604611 00604710 – 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 36
1 clip on pelmet, cut length – 006067 006069 36
2 end caps, one-sided – 006072 006074 36
Rollapparat no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
HELM 73 – Wall mounting, with wall mounting bracket no. 61/01
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Wall mounting bracket no. 60/01 Part no. Page
zinc-plated 006161 35
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
1
1
6
2
3
3
4
4
5
5
HELM 73 – Wall mounting, track with drilled holes on the side and one-sided pelmetting
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 35
cut length, drilled holes on the side 00604611 00604710 – 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 36
1 clip on pelmet, cut length – 006067 006069 36
2 end caps, one-sided – 006372 006373 39
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 spacer profile, stock length – 006370 006390 39
1 spacer profile, cut length – 0063799 0063999 39
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
2x1 clip on pelmet, stock length – 006066 006068 36
2x1 clip on pelmet, cut length – 006067 006069 36
2 end caps, double-sided – 006073 006075 36
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
HELM 73Technical Specifications
31
53
40 55
65 67
10,5
20
18+10
33,3
8
20
5
24,5
HEL
M 7
31
6
5
6
3
4
31
540
8
20
24,5
5
235
1557
10,5
10,5
1,8
65
42,3
5
13
20
67
1
19
5
6
3
4
41TEH_02H/02.2014
HEL
M 7
3
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 35
cut length, drilled holes on the side 00604611 00604710 – 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 36
1 clip on pelmet, cut length – 006067 006069 36
2 end caps, one-sided – 006372 006373 39
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 spacer profile, stock length – 006370 006390 39
1 spacer profile, cut length – 0063799 0063999 39
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
HELM 73 – Ceiling mounting, with pelmetting on both sides
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
2x1 clip on pelmet, stock length – 006066 006068 36
2x1 clip on pelmet, cut length – 006067 006069 36
2 end caps, double-sided – 006073 006075 36
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
1
1
6
6
19
3
3
4
4
5
5
HELM 73 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting
HELM 73Technical Specifications
45
46,2
40
22
156,5+8,5
5
13
13
12,3
3151,5
5
576
40
8
20
24,5
5
235
65
20
10,5
13
47,6
5
9,518
14
6
3
5
7
1
8
42TEH_02H/02.2014
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006066 006068 36
1 clip on pelmet, cut length – 006067 006069 36
Projection trackPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 Projection track, stock length – 006350 – 38
1 Projection track, cut length – 0063599 – 38
1 Screw set - 006351 38
2 End caps – 006352 006332 39
Trolley no. 73 Part no. Page
plastic 007360 35
Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
Bottom guide no. 214 Part no. Page
plastic 021461 35
HELM 73 – Wall mounting (with projection track and pelmetting)
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Projection trackPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 Projection track, stock length – 00601060 00601460 36
1 Projection track, cut length – 00601160 00601560 36
2 End caps – 006001 006002 36
HELM 73 ME Part no. Page
Set 007362 36optains: – 2 trolleys no. 73 – 2 flanges no. 73 V – 2 door catchers no. 65 P – 1 bottom guide no. 216
In case of double doors 2 sets are necessary.
1
7
8
HELM 73 ME – Wall mounting (with projection track and low installation)
1
6
18
3
4
5
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Trolley no. 73 Part no. Page
plastic 007359 37
HELM 73 Teleskopic Part no. Page
kit for double telescopic hardware1 006602 37
kit for three-leaf telescopic hardware2 006603 37
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 38
Bottom guide no. 316 S Part no. Page
plastic 031661 38
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 38
angle lenght = 85 mm 031663 38
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 034041 034043 034036 38cut length 034042 034044 034037 38
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 35
cut length, drilled holes on the side 00604611 00604710 – 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006076 006078 37
1 clip on pelmet, cut length – 006077 006079 37
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
2x1 spacer profile, stock length – 006370 006390 39
2x1 spacer profile, cut length – 0063799 0063999 39
end caps f. spacer profile, double-sided – 006374 006375 39
HELM 73 Synchronised Part no. Page
Set 007380 36optains: – 4 trolleys no. 73 m with guide – 4 door catchers no. 65 P – 4 bottom guides no. 214 – 2 deflection rollers – 1 coupling joint for tooth belt – 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001
HELM 73Technical Specifications
88,538
152,8
40
10
40
5,820
10,5
25
258
25
13,5
33,3
31
1941+2
15 3172
52,3+8
14
91,5
1,8
40
10,5 5,5
16
8
20
5
24,5
33+8 H
ELM
73
15
1
10
19
11
9
1
1
13
16
17
12
12
14
43TEH_02H/02.2014
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 35
cut length 006052 006053 006058 35
Trolley no. 73 Part no. Page
plastic 007359 37
HELM 73 Teleskopic Part no. Page
kit for double telescopic hardware1 006602 37
kit for three-leaf telescopic hardware2 006603 37
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 38
Bottom guide no. 316 S Part no. Page
plastic 031661 38
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 38
angle lenght = 85 mm 031663 38
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 034041 034043 034036 38cut length 034042 034044 034037 38
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 35
cut length, drilled holes on the side 00604611 00604710 – 35
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006076 006078 37
1 clip on pelmet, cut length – 006077 006079 37
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
2x1 spacer profile, stock length – 006370 006390 39
2x1 spacer profile, cut length – 0063799 0063999 39
end caps f. spacer profile, double-sided – 006374 006375 39
HELM 73 Synchronised Part no. Page
Set 007380 36optains: – 4 trolleys no. 73 m with guide – 4 door catchers no. 65 P – 4 bottom guides no. 214 – 2 deflection rollers – 1 coupling joint for tooth belt – 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001
HELM 73 – Synchronised, track with drilled holes on the side and one-sided pelmetting
1
1
11
12
19
13
14
15
16
17
9
10
HELM 73 – Telescopic hardware
Calculation for synchronised: tooth belt length = 2 x track length + 120 mm
Calculation for telescopic: tooth belt length = 2 x leaf length + 400 mm
HELM 73Technical Specifications
44TEH_02H/02.2014
HELM 85up to 90 kg leaf weight
HEL
M 8
5
45TEH_02H/02.2014
HELM 85up to 90 kg leaf weight
HELM 85
up to 90 kg leaf weight
Track aluminium silver anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size
Special featureenclosed track system: consisting of track, pelmet, end caps and plastic strip
Trolley double roller, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: Ceiling mounting and wall mounting• synchronised opening
Further information from page 46
tested according to DIN 1527: 1998100,000 cycles
14 7
2
5
9
3
6
8
46TEH_02H/02.2014
HELM 85up to 90 kg leaf weight
1 track no. 851 plastic strip no. 821 pelmet no. 852 end caps no. 852 trolleys no. 862 flanges no. 832 door catchers no. 85 P1 bottom guide no. 114
Part no.
1 track no. 85, 1600 mmfor door widths of 600-800 mm
008510
1 track no. 85, 2000 mmfor door widths of 810-1000 mm
008512
1 track no. 85, 2400 mmfor door widths of 1010-1200 mm
008513
1 track no. 85, 3000 mmfor door widths of 1210-1500 mm
008514
Track no. 851in stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm, silver anodised
Part no.
stock length silver anodised 008050
cut length silver anodised 008051
Hardware kit
1
HEL
M 8
5
47TEH_02H/02.2014
HELM 85up to 90 kg leaf weight
More accessories for HELM 85 from page 48
Part no.
zinc-plated 008660zinc-plated/plastic, with ball bearing and support screw (M10 x 30)
Trolley no. 855
Part no.
right 008080
left 008081tin phosphate coated, catch force adjustable
Door catcher no. 85 P7
plastic
Plastic strip no. 852 Part no.
plastic black 008260
plastic grey 008261
aluminium silver anodised
End cap no. 854 Part no.
aluminium silver anodised 008060
aluminium silver anodised, in stock lengths of 6000 mm or cut to size
Pelmet no. 853 Part no.
stock length silver anodised 008150
cut length silver anodised 008151
Part no.
zinc-plated 008320zinc-plated
Flange no. 856
in stock lengths of 6000 mm or cut to size, drilled approx. every 500 mm, aluminium natural finish
Bottom guide profile no. 1408 Part no.
stock length 014050
cut length 014051
plastic
Bottom guide no. 1149 Part no.
black 011460
5
7
2
4
3
6
8
9
48TEH_02H/02.2014
HELM 85Accessories
Accessories for HELM 85
Kit for double doors synchronised
Part no.
kit for double doors synchronised 008700
2 x deflection roller1 x wire rope holder1 x door driver2 x rope clamp1 x turnbuckle1 x bag gasketing, 12 m wire
accessory kit for leaf thickness of 30 - 42 mm
Synchronised
Part no.
plastic 021661zero-clearance bottom guide, matches bottom guide profile no. 240
Bottom guide no. 216 S
plastic, in stock lengths of 3000 mm or cut to size
Bottom guide profile no. 240 K
Part no.
stock length, plastic 024062
cut length, plastic 024063
More accessories, flush and pull handles, from page 68
Track no. 85Part no.
silver anodised Page
stock length 008050 46cut length 008051 46
Plastic strip no. 85 Part no. Page
black 008260 47
grey 008261 47
Pelmet no. 85Part no.
silver anodised Page
stock length 008150 47cut length 008151 47
Trolley no. 85 Part no. Page
zinc-plated 008660 47
Flange no. 85 Part no. Page
zinc-plated 008320 47
Door catcher no. 85 P Part no. Page
zinc-plated, right 008080 47
zinc-plated, left 008081 47
U-Track no. 140Part no.
silver anodised Page
stock length 014050 47cut length 014051 47
Bottom guide no. 114 Part no. Page
plastic, black 011460 47
Position 1 to 9 even with HELM 85, Wall- and ceiling mounting
HELM 85 Synchronised Part no. Page
Set 008700 48optains: – 2 deflection rollers – 1 wire rope holder – 1 door driver – 2 rope clamps – 1 turnbuckle – 1 bag gasketing, 12 m wire
10
12
20
40
25
35
4,5
3
50
85 80+4
3
29
40
25
3
8
12
20
35
4,5
50
8385
3
3
3
7
7
5
8
8
9
9
6
2
2
1
1
5
6
10
HEL
M 8
5
49TEH_02H/02.2014
HELM 85Technical Specifications
HELM 85, Wall or ceiling mounting
Track no. 85Part no.
silver anodised Page
stock length 008050 46cut length 008051 46
Plastic strip no. 85 Part no. Page
black 008260 47
grey 008261 47
Pelmet no. 85Part no.
silver anodised Page
stock length 008150 47cut length 008151 47
Trolley no. 85 Part no. Page
zinc-plated 008660 47
Flange no. 85 Part no. Page
zinc-plated 008320 47
Door catcher no. 85 P Part no. Page
zinc-plated, right 008080 47
zinc-plated, left 008081 47
U-Track no. 140Part no.
silver anodised Page
stock length 014050 47cut length 014051 47
Bottom guide no. 114 Part no. Page
plastic, black 011460 47
1
2
3
7
5
8
6
9
Position 1 to 9 even with HELM 85, Wall- and ceiling mounting
HELM 85 Synchronised Part no. Page
Set 008700 48optains: – 2 deflection rollers – 1 wire rope holder – 1 door driver – 2 rope clamps – 1 turnbuckle – 1 bag gasketing, 12 m wire
1
10
HELM 85 synchronised – Wall or ceiling mounting
50TEH_02H/02.2014
HELM 120 and HELM 150
HEL
M 1
20 a
nd
HEL
M 1
50
51TEH_02H/02.2014
HELM 120 and HELM 150
HELM 120
up to 120 kg leaf weight
Track aluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet• telescopic fitting• synchronised opening
Further information from page 52
HELM 150
up to 170 kg leaf weight
Track aluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolley double pair, with ball bearings
Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet• telescopic fitting• synchronised opening
Further information from page 60
tested according to DIN 1527: 1998100,000 cycles
tested according to DIN 1527: 1998100,000 cycles
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
15 3
6
4
2
52TEH_02H/02.2014
HELM 120up to 120 kg leaf weight
1 track no. 1202 trolleys no. 120-912 flanges no. 120-932 door catchers no. 120 P1 bottom guide no. 216with x wall mounting brackets
Part no.
1 track no. 120, 1400 mmfor door widths of 600-800 mm5 wall mounting brackets no. 120-01
120120000016
1 track no. 120, 1600 mmfor door widths of 700-900 mm6 wall mounting brackets no. 120-01
120120000017
1 track no. 120, 1800 mmfor door widths of 800-1000 mm7 wall mounting brackets no. 120-01
120120000018
1 track no. 120, 2000 mmfor door widths of 900-1100 mm7 wall mounting brackets no. 120-01
120120000019
1 track no. 120, 2200 mmfor door widths of 1000-1200 mm8 wall mounting brackets no. 120-01
120120000020
1 track no. 120, 2500 mmfor door widths of 1200-1500 mm9 wall mounting brackets no. 120-01
120120000021
Part no.
1 track no. 120, 1400 mmfor door widths of 600-800 mm
120120000022
1 track no. 120, 1600 mmfor door widths of 700-900 mm
120120000023
1 track no. 120, 1800 mmfor door widths of 800-1000 mm
120120000024
1 track no. 120, 2000 mmfor door widths of 900-1100 mm
120120000025
1 track no. 120, 2200 mmfor door widths of 1000-1200 mm
120120000026
1 track no. 120, 2500 mmfor door widths of 1200-1500 mm
120120000027
1 track no. 1202 trolleys no. 120-912 flanges no. 120-932 door catchers no. 120 P1 bottom guide no. 216without wall mounting bracket
Hardware kit
3054
20
HEL
M 1
20
53TEH_02H/02.2014
HELM 120up to 120 kg leaf weight
More accessories for HELM 120 from page 54
Part no.
stainless steel 120070093002stainless steel
Flange no. 120-934
Part no.
plastic 021660plastic, with plug
Bottom guide no. 216 6
Track no. 1201in stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm, silver anodised
Part no.
stock length silver anodised 120020000006
cut length silver anodised 120020000010
aluminium natural finish, including locking screw, (fixing spacing: 600 mm)
Wall mounting bracket no. 120-012 Part no.
aluminium 120010001001
stainless steel/plastic, catch force adjustable
Part no.
plastic/stainless steel 120040001002Door catcher no. 120 P5
Part no.
plastic/stainless steel 120050091001
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M8x45
Trolley no. 1203
Part no.
bottom door buffer 0891306
with fixing material
For heavy duty sliding in-stallations we recommend an additional bottom door buffer.
Bottom door buffer
9
7
8
54TEH_02H/02.2014
HELM 120Accessories
Pelmets for HELM 120
Part no.
aluminium natural finish 120110023001
Part no.
stock length natural finish 150110003020
cut length natural finish 150110003022
stock length silver anodised 150110003007
cut length silver anodised 150110003009
aluminium natural finish for pelmet no. 150 W/D,every 700 mm
Adapter piece no. 120
Pelmets no. 150 W
for wall mounting,aluminium natural finish or aluminium silver anodised, in mill lengths of 6000 mm or cut to size
End cap no. 150 W
for wall mounting, aluminium natural finish or RAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015024
aluminium natural finish/right 150110015025
light grey/left 150110015011
light grey/right 150110015012
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
8
7
9
HEL
M 1
20
55TEH_02H/02.2014
HELM 120Accessories
More accessories for HELM 120 from page 56
Single components for double doors synchronised
Part no.
tooth belt, sold by metre 000110017001
Calculation for telescopic: tooth belt length =2 x leaf length + 400 mm
sold by metre, black
Tooth belt
Part no.
kit for double doors synchronised 120110022022
2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)
Synchronised
Art.-Nr.
plastic/stainless steel 120050091003
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M8x55
Trolley no. 120
Pelmet no. 150 D
for ceiling mounting, aluminium natural finish or aluminium silver anodised, in mill lengths of 6000 mm or cut to size
Part no.
stock length natural finish 150110003021
cut length natural finish 150110003023
stock length silver anodised 150110003008
cut length silver anodised 150110003010
End cap no. 150 D
for ceiling mounting, aluminium natural finish or RAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015029
aluminium natural finish/right 150110015030
light grey/left 150110015027
light grey/right 150110015028
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
10
11
12
9
8
56TEH_02H/02.2014
HELM 120Accessories
accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)
Telescopic fitting no. 120 Part no.
kit for double telescopic hardware:2 deflection rollers1 door driver1 connector1 coupling joint for tooth belt
006604
kit for three-leaf telescopic hardware:2 deflection rollers2 door drivers1 connector2 deflection rollers for driver1 coupling joint for tooth belt1 door driver for deflection roller
006605
Single components for telescopic hardware
Part no.
tooth belt, sold by metre 000110017001
Calculation for synchronised: tooth belt length =2 x track length + 120 mm
sold by metre, black
Tooth belt
Part no.
plastic/stainless steel 120050091003
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M8x55
Trolley no. 120
Art.-Nr.
plastic 031661bottom guide, plastic, suitable for bottom guide track no. 340
Guide glide no. 316 S
Part no.
stock length natural finish 034041
cut length natural finish 034042
stock length silver anodised 034043
cut length silver anodised 034044
stock length stainless steel finish anodised 034036
cut length stainless steel finish anodised 034037
Aluminium natural finish, Aluminium silver anodised oder stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght
Bottom guide profile no. 340
with mounting bracket, stainless-steel, suitable for bottom guide track no. 340
Guide glide no. 316 S Part no.
L = 45 mm 031662
L = 85 mm 031663
More accessories for HELM 120 from page 57
13
14
15
16
17
18
HEL
M 1
20
57TEH_02H/02.2014
HELM 120Accessories
Accessories for HELM 120
More accessories, flush and pull handles, from page 68
bottom guide, plastic, suitable for bottom guide track no. 240
Guide glide no. 216 S
plastic, in stock lenght of 3000 mm or cut lenght
Bottom guide profile no. 240 K
Part no.
stock lenght, plastic 024062
cut lenght, plastic 024063
Part no.
plastic 021661
53,5
125
2140
22+1
0
25
40
13
15
10,5
5
4,5
93
73
10,5
25
40
13
15
522
+10
2
1
3
3
5
5
7
6
6
4
4
8
88
17 7
58TEH_02H/02.2014
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Wall mounting bracket no. 120/01 Part no. Page
zinc-plated 120010001001 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 53
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 53
Bottom guide no. 216 Part no. Page
plastic 021660 53
Adapter piece no. 120 Part no. Page
natural finish 120110023001 54
Pelmet no. 150 WPart no.
natural finishPart no.
silver anodised Page
stock length 150110003020 150110003007 54
cut length 150110003022 150110003009 54
End cap no. 150 WPart no.
natural finishPart no.
light grey Page
left 150110015024 150110015011 54
right 150110015025 150110015012 54
HELM 120Technical Specifications
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 53
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 53
Bottom guide no. 216 Part no. Page
plastic 021660 53
Adapter piece no. 120 Part no. Page
natural finish 120110023001 54
Pelmet no. 150 DPart no.
natural finishPart no.
silver anodised Page
stock length 150110003021 150110003008 54
cut length 150110003023 150110003010 54
End cap no. 150 DPart no.
natural finishPart no.
light grey Page
left 150110015029 150110015027 55
right 150110015030 150110015028 55
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091003 55
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 53
Bottom guide no. 216 Part no. Page
plastic 021660 53
HELM 73 Synchronised Part no. Page
kit for double doors synchronised 120110022022 55
2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001 55
HELM 120 – Wall mounting, with pelmetting
2
1
3
3
5
5
7
6
6
4
4
8
88
HELM 120 – Ceiling mounting, with pelmetting on both sides
17 7
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091003 55
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
HELM 120 Telescopic Part no. Page
kit for double telescopic hardware1 006604 56
kit for three-leaf telescopic hardware2 006605 56
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 56
Bottom guide no. 316 S Part no. Page
plastic 031661 56
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 56
angle lenght = 85 mm 031663 56
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 034041 034043 034036 56cut length 034042 034044 034037 56
1
2
3
4
5
6
7
8
9
1
3
4
5
6
7
8
9
25
25
148
10
4040
~6 25
39+2
~340
15
~6
349016
10,5
13
15
12,3
5
40
~25 ~26
34
4030+7
~38,2
1
10
4
12
11
5
6
1
1315
14
16
18
4
17
HEL
M 1
20
59TEH_02H/02.2014
HEL
M 1
20
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091003 55
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 53
Bottom guide no. 216 Part no. Page
plastic 021660 53
HELM 73 Synchronised Part no. Page
kit for double doors synchronised 120110022022 55
2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001 55
HELM 120Technical Specifications
Track no. 120Part no.
natural finishPart no.
silver anodised Page
stock length – 120020000006 53
cut length – 120020000010 53
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091003 55
Flange no. 120-93 Part no. Page
stainless steel 120070093002 53
HELM 120 Telescopic Part no. Page
kit for double telescopic hardware1 006604 56
kit for three-leaf telescopic hardware2 006605 56
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 56
Bottom guide no. 316 S Part no. Page
plastic 031661 56
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 56
angle lenght = 85 mm 031663 56
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 034041 034043 034036 56cut length 034042 034044 034037 56
HELM 120 – Synchronised
HELM 120 – Telescopic
1
10
3
12
11
4
5
1
1315
14
16
18
17
Calculation for telescopic: tooth belt length = 2 x leaf length + 400 mm
Calculation for syncronised: tooth belt length = 2 x track length + 120 mm
1
13
14
4
15
16
17
18
1
10
4
5
6
11
12
15 23
6
4
60TEH_02H/02.2014
HELM 150up to 170 kg leaf weight
Part no.
stock length silver anodised 150020000006
cut length silver anodised 150020000010
1 track no. 150, 1700 mmfor door widths of 710-900 mm
150020000013
1 track no. 150, 2100 mmfor door widths of 910-1000 mm
150020000014
1 track no. 150, 2500 mmfor door widths of 1010-1300 mm
150020000015
1 track no. 150, 3000 mmfor door widths of 1310-1600 mm
150020000016
1 track no. 150, 3300 mmfor door widths of 1610-1700 mm
150020000017
Part no.
2 trolleys no. 150-912 flanges no. 150-932 door catchers no. 150 P1 bottom guide no. 316
150120000001
Track no. 150
aluminium silver anodisedin stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 600 mm)
Hardware kit
1
3054
20
HEL
M 1
50
61TEH_02H/02.2014
HELM 150up to 170 kg leaf weight
More accessories for HELM 150 from page 62
wall mounting bracket no. 150-01, aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 600 mm)
Mounting parts Part no.
1 piece aluminium 150010001001
7 pieces aluminium 150010001002
Part no.
1 piece aluminium 150010002001
7 pieces aluminium 150010002002
ceiling plate no. 150-02aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 600 mm)
plastic/stainless steel, catch force adjustable
Part no.
plastic/stainless steel 150040001002Door catcher no. 150 P
Part no.
plastic/stainless steel 150050091001
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M10x55
Trolley no. 150
Part no.
stainless steel 150070093001
stainless steel
Flange no. 150-93
Part no.
plastic 031660plastic, with plug
Bottom guide no. 316
Part no.
bottom door buffer 0891306
with fixing material
For heavy duty sliding installations we recom-mend an additional bottom door buffer.
Bottom door buffer
Part no.
aluminium 150030003001
aluminiumAttention: For one track connection 2 pieces track connectors are required.
Track connector no. 150-03
2
5
3
4
6
9
6
8
16
7
62TEH_02H/02.2014
HELM 150up to 170 kg leaf weight
Track and pelmets for HELM 150
Part no.
stock length silver anodised 150020002006
cut length silver anodised 150020002010
Track no. 150 B7aluminium silver anodisedin stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 6000 mm)
Part no.
aluminium 150030003001
aluminiumAttention: For one track connection 2 pieces of track connectors are required.
Track connector no. 150-03
7
HEL
M 1
50
63TEH_02H/02.2014
HELM 150up to 170 kg leaf weight
More accessories for HELM 150 from page 64
Part no.
stock length natural finish 150110003021
cut length natural finish 150110003023
stock length silver anodised 150110003008
cut length silver anodised 150110003010
for ceiling mounting,aluminium natural finish or aluminium silver anodised, in stock lengths of 6000 mm or cut to size
Part no.
stock length natural finish 150110003020
cut length natural finish 150110003022
stock length silver anodised 150110003007
cut length silver anodised 150110003009
for wall mounting,aluminium natural finish or aluminium silver anodised, in stock lengths of 6000 mm or cut to size cut to size
Pelmet no. 150 W
Pelmet no. 150 D
8
for ceiling mounting, aluminium natural finish or RAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015029
aluminium natural finish/right 150110015030
light grey/left 150110015027
light grey/right 150110015028
End cap no. 150 W
for wall mounting,aluminium natural finish or RAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015024
aluminium natural finish/right 150110015025
light grey/left 150110015011
light grey/right 150110015012
Single components for double doors synchronised
Part no.
kit for double doors synchronised 150110022022
2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)
Synchronised
Part no.
tooth belt, sold by metre 000110017001
Calculation for synchronised: tooth belt length =2 x track length + 120 mm
sold by metre, black
Tooth belt
End cap no. 150 D
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
8
9
9
10
11
8
64TEH_02H/02.2014
HELM 150Accessories
Part no.
tooth belt, sold by metre 000110017001
Calculation for telescopic: tooth belt length =2 x leaf length + 400 mm
sold by metre, blackAttention: In case of three-leaf installations two tooth belts are required!
Tooth belt
accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)
Telescopic fitting no. 150 Part no.
kit for double telescopic hardware:2 deflection rollers1 door driver1 connector1 coupling joint for tooth belt
006606
kit for three-leaf telescopic hardware:2 deflection rollers3 door drives1 connector2 deflection rollers for driver2 coupling joint for tooth belt
006607
Single components for telescopic hardware
Art.-Nr.
plastic 031661bottom guide, plastic, suitable for bottom guide track no. 340
Guide glide no. 316 S
Part no.
stock length natural finish 034041
cut length natural finish 034042
stock length silver anodised 034043
cut length silver anodised 034044
stock length stainless steel finish anodised 034036
cut length stainless steel finish anodised 034037
Aluminium natural finish, Aluminium silver anodised oder stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght
Bottom guide profile no. 340
with mounting bracket, stainless-steel, suitable for bottom guide track no. 340
Guide glide no. 316 S Part no.
L = 45 mm 031662
L = 85 mm 031663
12
13
14
15
16
HEL
M 1
50
65TEH_02H/02.2014
HELM 150up to 170 kg leaf weight
Accessories for HELM 150
More accessories, flush and pull handles, from page 68
Part no.
stock length natural finish 034041
cut length natural finish 034042
stock length silver anodised 034043
cut length silver anodised 034044
stock length stainless steel finish anodised 034036
cut length stainless steel finish anodised 034037
Aluminium natural finish, Aluminium silver anodised or stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght
Bottom guide profile no. 340
with mounting bracket, stainless-steel, suitable for bottom guide track no. 340
Guide glide no. 316 S Part no.
plastic 031661
30 +
12
14,5
30
40
93
46
53,56,5
19,5
19,5
125
2546
30 +
12
53,5
14,5
30
40
19,5
19,5
4
4
3
3
5
5
2
7
6
6
8
8
7
66TEH_02H/02.2014
HELM 150Technical Specifications
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093002 61
Door catcher no. 150 P Part no. Page
plastic/stainless steel 150040001002 61
Bottom guide no. 316 Part no. Page
plastic 031660 61
Pelmet no. 150 DPart no.
natural finishPart no.
silver anodised Page
stock length 150110003021 150110003008 63
cut length 150110003023 150110003010 63
End cap no. 150 DPart no.
natural finishPart no.
light grey Page
left 150110015029 150110015027 63
right 150110015030 150110015028 63
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Wall mounting bracket no. 150/01 Part no. Page
zinc-plated 150010001001 61
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093001 61
Door catcher no. 150 P Part no. Page
plastic/stainless steel 150040001002 61
Bottom guide no. 316 Part no. Page
plastic 031660 61
Pelmet no. 150 WPart no.
natural finishPart no.
silver anodised Page
stock length 150110003020 150110003007 63
cut length 150110003022 150110003009 63
End cap no. 150 WPart no.
natural finishPart no.
light grey Page
left 150110015024 150110015011 63
right 150110015025 150110015012 63
7
2
3
4
5
6
8
9
HELM 150 – Wall mounting, with pelmetting
7
3
4
5
6
8
9
HELM 150 – Ceiling mounting, with pelmetting
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093001 61
Door catcher no. 150 P Part no. Page
plastic/stainless steel 150040001002 61
Bottom guide no. 316 Part no. Page
plastic 031660 61
HELM 150 Synchronised Part no. Page
kit for double doors synchronised 150110022022 63
optains: 2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001 63
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093002 61
HELM 150 Telescopic Part no. Page
kit for double telescopic hardware1 006606 64
kit for three-leaf telescopic hardware2 006607 64
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 64
Bottom guide no. 316 S Part no. Page
plastic 031661 64
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 64
angle lenght = 85 mm 031663 64
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length 034041 034043 034036 64cut length 034042 034044 034037 64
44
4630+7
40
8
19,5
19,5
~38,3
~25 ~26
39+2
46
30
4010
40
8,5
100,5
44
4920,5
5,5
25
258 14
6
1
1
4
12
13
14 15
16
3
5
10
3
4
6
11
HEL
M 1
50
67TEH_02H/02.2014
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093001 61
Door catcher no. 150 P Part no. Page
plastic/stainless steel 150040001002 61
Bottom guide no. 316 Part no. Page
plastic 031660 61
HELM 150 Synchronised Part no. Page
kit for double doors synchronised 150110022022 63
optains: 2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp
Tooth belt (sold by metre) 000110017001 63
1
3
4
5
6
10
11
HELM 150Technical Specifications
Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62
cut length – 150020002010 62
Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 61
Flange no. 150-93 Part no. Page
stainless steel 150070093002 61
HELM 150 Telescopic Part no. Page
kit for double telescopic hardware1 006606 64
kit for three-leaf telescopic hardware2 006607 64
1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt
2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller
Tooth belt (sold by metre) 000110017001 64
Bottom guide no. 316 S Part no. Page
plastic 031661 64
Bottom guide no. 316 S Part no. Page
angle lenght = 45 mm 031662 64
angle lenght = 85 mm 031663 64
U-Track no. 340Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length 034041 034043 034036 64cut length 034042 034044 034037 64
HELM 150 – Synchronised
1
3
4
12
13
14
15
16
HELM 150 – Telescopic
Calculation for telescopic: tooth belt length = 2 x leaf length + 400 mm
Calculation for syncronised: tooth belt length = 2 x track length + 120 mm
68TEH_02H/02.2014
Hardware for Sliding Doors (Timber)Flush and Pull Handles
Flu
sh a
nd
Pu
ll H
and
les
69TEH_02H/02.2014
D H TL Supports
Ø 30 80 from 200 Ø 25
KWS 8179.. Part no.
stainless steel
brushed 8179.82as a pair for two-sided operation and as piece for one-sided operation
For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories, TEK_0308"
TL
KWS Pull Handles
D L H
Ø 25 from 200 75
KWS 8170.. Part no.
stainless steel
brushed 8170.82as a pair for two-sided operation and as piece for one-sided operation
For more finishes and the relevant fixing material please request the brochure ”Pull Handles and Accessories, TEK_0308”
KWS Flush Handles
Part no.
aluminium machined according to E 6
KWS 1 silver-anodised 5251.41
KWS 2 nickel silver-anodised 5251.42
stainless steel
brushed 5251.82
polished 5251.83
Ø 65 mm sliding door flush handle for doors 38 - 42 mm
more door thicknesses from 32 mm on request
KWS 5251..
Hardware for Sliding Doors (Timber)Flush and Pull Handles
TL
TL
70TEH_02H/02.2014
KWS 8525..Part no.
stainless steel
brushed 8525.82handle bar of stainless steel 30 x 30 x 2 mmhandle supports of aluminium, stainless steel finish anodised
as a pair for two-sided operationand as piece for one-sided operation
For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_0308".
TL L H
400 300 80
500 400 80
KWS 8537..Part no.
stainless steel
brushed 8537.82handle bar of stainless steel 40 x 10 mm handle supports of aluminium, stainless steel finish anodised
as a pair for two-sided operation and as piece for one-sided operation
For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_0308".
TL L H
400 300 60
500 400 60
Hardware for Sliding Doors (Timber)Flush and Pull Handles
Flu
sh a
nd
Pu
ll H
and
les
71TEH_02H/02.2014
We are pleased to send you further information regarding the KWS range on request.
KWS 8520..
30 x 30 tube
L = 2500 mm or cut
Part no.
stainless steel
brushed 8520.82
KWS 8702..
for 30 x 30 x 2 mm tube
modular support KS-30 for concealed fixing
of aluminium, stainless steel finish anodised
KWS 8704..
for 30 x 30 x 2 mm tube
modular support KS-30 for concealed fixing
of aluminium, stainless steel finish anodised
Part no.
aluminium machined according to E 5
stainless steel finish anodised 8702.35
Part no.
aluminium machined according to E 5
stainless steel finish anodised 8704.35
Hardware for Sliding Doors (Timber)Flush and Pull Handles
72TEH_02H/02.2014
Hardware for Sliding Doors (Timber)Technical Specifications
Single leaf installation Two leaves run in one track profile and can: • be moved independently of each other• be moved simultaneously in opposite directions (synchronised)
Two leaves run in two track profiles. • type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.
Three-leaf installation (two plus one). Three leaves operate in two track profiles.• type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.• The leaves are moved independently of each other.
Three leaves run in three track profiles. • type 1: The front leaf pulls the rear leaves into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaves into the desired position by means of telescopic deflection.
Four-leaf installation (two plus two). Four leaves run in two track profiles.• type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.• The leaves can be moved independently of each other.• The leaves can be moved simultaneously in opposite directions.
Installation types
Tech
nic
al S
pec
ifica
tio
ns
73TEH_02H/02.2014
74TEH_02H/02.2014
Sample of Request for Proposal
_______ sets HELM 73
Installation type: single leaf installation (see p. 72 )
Leaf width: 1000 mm
Leaf thickness: 40 mm
Leaf weight 60 kg
Material: timber
Track mounting: by projection track, low headroom installation
Type: track and projection track in stainless steel effect
Special equipment: damper and soft closing device SmartStop, both sides
Bottom guide: bottom guide profile 240 K with bottom guide 216 S
Accessories: flush handle 5251.82 stainless steel, brushed
Hardware for Sliding Doors (Timber)Sample of Request for Proposal
Woelm GmbH I Hasselbecker Str. 2- 4 I D - 42579 Heiligenhaus I Tel.: + 49 (0) 20 56 - 18 - 0 I Fax: + 49 (0) 20 56 - 18 - 21
Ap
pen
dix
75TEH_02H/02.2014
Order Enquiry
Company ____________________________________________
Name ______________________________________________
Street ______________________________________________
Postcode/city _________________________________________
Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: ______________________________
Required information for timber sliding doors
Telephone ____________________________________________
Fax ______________________________________________
E-mail ______________________________________________
Contact person _____________________________
Number of required installations _____________________ piece
HELM sliding hardware no. ______________________
Number of leaves ______________________ Installation type _____________________________ (see page 72)
Leaf widths ______________________ mm Leaf thickness _____________________
Leaf weight ______________________ kg
Straight slide installations
bottom guide bottom guide profile no. 240 K Part no.: 0240.62 + 0240.63
bottom guide profile no. 240 Part no.: 0240.60 + 0240.61
bottom guide profile no. 340 Part no.: 0340.41 + 0340.42 + 0340.36 + 0340.37
bottom guide no. 216 Part no.: 021660
bottom guide no. 216 S Part no.: 021661
bottom guide no. 316 Part no.: 031661
bottom guide no. 316 S Part no.: 031661
track mounting wall mounting bracket ceiling plate (only for HELM 53, 73, 150
direct wall mounting direct ceiling mounting
projection track
pelmets not required required (aluminium, aluminium silver anodised or stainless steel finish anodised)
Flush / pull handles
sliding door flush handle no. 5251 Part no.: _______________________________
pull handle no. 8170 Part no.: _______________________________
pull handle no. 8179 Part no.: _______________________________
pull handle no. 8537 Part no.: _______________________________
Operation synchronised telescopic 2-leaf telescopic 3-leaf
Hardware for Sliding Doors (Timber)Enquiry Form
Woelm GmbHHasselbecker Str. 2- 4D - 42579 HeiligenhausPhone: + 49 (0) 20 56 - 18 - 0Telefax: + 49 (0) 20 56 - 18 - [email protected]
Woelm Austria GmbHSeewalchen 5aA - 5201 SeekirchenPhone: + 43 (0) 62 12 - 25 02Telefax: + 43 (0) 62 12 - 69 [email protected]
The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission.
Part no. TEH_02H/02.2014This catalogue supersedes all previous catalogues.
TEK_0102 TEK_0308 TEK_0506
TEK_0407
TEH_01 TEH_02H TEH_02G
TEH_02D TEH_06 TEH_09
TEH_11 TEH_12 TEH_40
HELM Range
TEH_01 Hardware for Sliding Wardrobe Doors
TEH_02H Hardware for Sliding Doors (Timber)
TEH_02G Hardware for Sliding Doors (Glass)
TEH_02DDesign Hardware forSliding Doors (Timber and Glass)
TEH_06 Hardware for Sliding Gates
TEH_09 Hardware for Gateway Gates
TEH_11 Hardware for Curtains and Tarpaulins
TEH_12Safety Equipment against Falls from a Height (PSE)
TEH_40 Hardware for Sliding Shutters
KWS Range
TEK_0102 Door Holders and Door Stops
TEK_0308 Pull Handles, Door Handles and Accessories
TEK_0506 Flush Handles and Locks
TEK_0407Hardware for Handrails, Floor Rails,Coat Racks and Toilet Partition Walls