Hardware Catalogue Contender Sailcloth 2015 UK
Click here to load reader
-
Upload
contender-sailcloth -
Category
Documents
-
view
300 -
download
19
description
Transcript of Hardware Catalogue Contender Sailcloth 2015 UK
Hardware Catalogue 2015Battens • Sail Hardware • Webbing & Velcro • Seaming & SewingAdhesives • Tapes & Luff Tapes • Components • Fabrics
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Phone: (+31) 297 237575 • [email protected]
Addresses
Contender U.S.54 Front StreetFall River, Massachussetts 02721-4302United StatesPhone: (+1) 508 674 7700Fax: (+1) 508 674 [email protected]
Contender Australia4a Wilmette PlaceMona Vale N.S.W. 2103AustraliaPhone: (+61) 2 9997 4099Fax: (+61) 2 9997 [email protected]
Contender U.K.Unit 12b The IO CentreStephenson RoadSegensworth SouthFareham - HampshirePO 15 5 RUUnited KingdomPhone: (+44) 1329 849 036Fax: (+44) 1329 845 [email protected]
Contender France18 rue Jean RouxelZac de la Pentecôte44700 OrvaultFrancePhone: (+33) 240 637 313Fax: (+33) 240 635 [email protected]
Contender ItalyVia Aldo Moro, 2138062 Arco (TN)ItalyPhone: (+39) 0464 514 020Fax: (+39) 0464 514 [email protected]
Contender GermanyWendenstrasse 455D 20537 HamburgGermanyPhone: (+49) 40 2111 9722Fax: (+49) 40 2111 [email protected]
Contender New Zealand3/19 Hannigan DrivePanmure, Auckland 1072New ZealandPhone: (+64) 9 527 2123Fax: (+64) 9 527 [email protected]
Contender SpainC/Pep Ventura, 12 - Pol. Industrial Sud08440 Cardedeu(Barcelona)SpainPhone: (+34) 902 995 670Fax: (+34) 938 464 [email protected]
Contender SwedenJohannesfredsvägen 9cS-16869 BrommaSwedenPhone: (+46)8261820Fax: (+46) 8 [email protected]
Contender B.V.Nijverheidsweg 17A3641 RP MijdrechtThe Netherlands
P.O. Box 2093640 AE MijdrechtThe Netherlands
Chamber of Commerce: 30077741
Phone: (+31) 297 237575Fax: (+31) 297 281670
HEADOFFICE: CONTENDER NETHERLANDS
3
Hardware Catalogue 2015 • Contender Sailcloth
Index
Battens 5
Sail Hardware 23
Webbing & Velcro 49
Seaming & Sewing 55
Adhesives 63
Tapes & Luff Tapes 67
Components 73
Fabrics 77
Terms of Trading 89
Phone: (+31) 297 237575 • [email protected]
4
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
BattensBlueStreak • RBS • Roller Battens • Contract Battens Round Battens • Battenfittings
The BlueStreak® Batten Range
Ocean Racer/Cruiser Tapered Leech BattensA range of tapered battens designed with soft tips, starting with the OR1 and progressing in stiffness to the OR5. These battens are ideal for use as leech battens in mainsails and jibs.
Ocean Racer/Cruiser Tapered Full BattensA range of tapered battens designed with a drive point of 40%. These battens are suitable for full length top battens and fully battened mainsails.
Dinghy Tapered Leech BattensA range of 10 mm and 15 mm tapered battens designed with a soft tip. These battens are ideal to use as leech battens in mainsails and jibs for dinghies and smaller keelboats.
Un-tapered Contract CoilA complete range of 10 mm, 15 mm, 20 mm Ocean Racer 1 to 5 and 28 mm Amazon, profiles supplied in 15 meter coils. These are ideal to use as 50% top battens and also in fully battened mainsails.
RBS Epoxy Battens
RBS E-GLASS battens are constructed using unidirectional pretensioned E-GLASS fibres impregnated with a specially formulated flexible epoxy resin. This unique combination produces an extremely durable, stiff and virtually unbreakable batten that can be tapered down to less than 1 mm creating an extremely soft tip.
RBS Battens: low weight – high stiffness – virtually unbreakable. Suitable for use in High Aspect jibs.
7
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ Mainsail Batten Selection Guide
This guide is not leading, only to give a direction to which batten to use on which boat.
Fractional rig Masthead rig
Boatsize Blue Streak RBS Blue Streak RBS
25 ft. #1 15mm stiff E15180 #1 15mm stiff E15180
#2 15mm x-stiff E15200 #2 15mm x-stiff E15180
#3 15mm x-stiff E15230 #3 15mm x-stiff E15200
#4 OR1 E19230 #4 OR1 E15230
#5 OR1 E19230 #5 OR1 E15230
30 ft. #1 OR1 E19230 #1 OR1 E19200
#2 OR1 E19230 #2 OR1 E19230
#3 OR2 E19265 #3 OR2 E19265
#4 OR2 E19300 #4 OR2 E19265
#5 OR2 E19300 #5 OR2 E19265
35 ft. #1 OR1 E19230 #1 OR1 E19230
#2 OR2 E19265 #2 OR2 E19265
#3 OR3 E19300 #3 OR3 E19265
#4 OR3 E19350 #4 OR3 E19300
#5 OR3 E19350 #5 OR3 E19300
40 ft. #1 OR2 E19265 #1 OR1 E19230
#2 OR2 E19300 #2 OR2 E19265
#3 OR3 E19350 #3 OR3 E19300
#4 OR4 E19350 #4 OR4 E19300
#5 OR4 E19350 #5 OR4 E19300
45 ft. #1 OR2 E19265 #1 OR1 E19265
#2 OR3 E19300 #2 OR2 E19300
#3 OR4 E19350 #3 OR3 E19300
#4 OR5 E19400 #4 OR4 E19350
#5 OR5 E19400 #5 OR4 E19350
50 ft. #1 OR2 E19300 #1 OR2 E19265
#2 OR3 E19350 #2 OR3 E19300
#3 OR4 E19400 #3 OR4 E19350
#4 OR5 E19400 #4 OR4 E19400
#5 OR5 E19400 #5 OR4 E19400
≥ Batten Conversion Table
Bluestreak Use RBS Epoxy Use RBS Carbon
WR3 15 x 6.5 mm x-stiff E15230 15 x 5.8 mm x-stiff Too stiff to use as upgrade
OR 1 - 20 x 6.0 mm E19230 - 19 mm x 5.8 mm CB15200 - 15 mm x 5.1 mm
OR 2 - 20 x 8.0 mm E19265 - 19 mm x 6.7 mm CB19200 - 19 mm x 5.1 mm
OR 3 - 20 x 9.0 mm E19300 - 19 mm x 7.6 mm CB19200 - 19 mm x 5.1 mm
OR 4 - 20 x 10.0 mm E19350 - 19 mm x 8.9 mm CB19250 - 19 mm x 6.4 mm
OR 5 - 20 x 12.0 mm E19400 - 19 mm x 10.2 mm CB19300 - 19 mm x 7.6 mm
Amazon - 28 x 13.0 mm E19400 - 19 mm x 10.2 mm CB19400 - 19 mm x 10.2 mm
8
Phone: (+31) 297 237575 • [email protected]
Battens
≥ BlueStreak® Tapered Leech Battens 20 mm
Length Part no. 6 mm Part no. 8 mm Part no. 9 mm Part no. 10 mm Part no. 12 mm
750 mm P 0750 OR1 P 0750 OR2 – – –
900 mm P 0900 OR1 P 0900 OR2 – – –
1050 mm P 1050 OR1 P 1050 OR2 P 1050 OR3 – –
1250 mm P 1250 OR1 P 1250 OR2 P 1250 OR3 P 1250 OR4 –
1500 mm P 1500 OR1 P 1500 OR2 P 1500 OR3 P 1500 OR4 P 1500 OR5
1800 mm P 1800 OR1 P 1800 OR2 P 1800 OR3 P 1800 OR4 P 1800 OR5
2100 mm P 2100 OR1 P 2100 OR2 P 2100 OR3 P 2100 OR4 P 2100 OR5
2400 mm – P 2400 OR2 P 2400 OR3 P 2400 OR4 P 2400 OR5
2700 mm – P 2700 OR2 P 2700 OR3 P 2700 OR4 P 2700 OR5
OR 1 OR 2 OR 4OR 3 OR 5
9
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ BlueStreak® Tapered Full Battens 20 mm
Length Part no. 6 mm Part no. 8 mm Part no. 9 mm Part no. 10 mm Part no. 12 mm
1200 mm PF 1200 OR1 PF 1200 0R2 – – –
1500 mm PF 1500 OR1 PF 1500 OR2 – – –
1800 mm PF 1800 OR1 PF 1800 OR2 PF 1800 OR3 – –
2100 mm PF 2100 OR1 PF 2100 OR2 PF 2100 OR3 – –
2400 mm – PF 2400 OR2 PF 2400 OR3 PF 2400 OR4 –
2700 mm – PF 2700 OR2 PF 2700 OR3 PF 2700 OR4 –
3000 mm – PF 3000 OR2 PF 3000 OR3 – –
3600 mm – – PF 3600 OR3 PF 3600 OR4 –
4200 mm – – PF 4200 OR3 PF 4200 OR4 PF 4200 OR5
5000 mm – – – PF 5000 OR4 PF 5000 OR5
6000 mm – – – – PF 6000 OR5
OR 1 OR 2 OR 4OR 3 OR 5
10
Phone: (+31) 297 237575 • [email protected]
Battens
≥ BlueStreak® Tapered Dinghy Battens
Length Light 10 mm Medium 10 mm Stiff 15 mm X-stiff 15 mm
450 mm PD0450L PD0450M – –
600 mm PD0600L PD0600M PD0600S PD0600X
750mm PD0750L PD0750M PD0750S PD0750X
900 mm PD0900L PD0900M PD0900S PD0900X
1050 mm PD1050L PD1050M PD1050S PD1050X
1200 mm – PD1200M PD1200S PD1200X
1350 mm – PD1350M PD1350S PD1350X
1500 mm – – PD1500S PD1500X
11
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ BlueStreak® Untapered 15 m Coils
Part no. Type
PCWRSTIFF STIFF 15 mm
PCWRXTST X STIFF 15 mm
PCOR1 OR1 20 mm
PCOR2 OR2 20 mm
PCOR3 OR3 20 mm
PCOR4 OR4 20 mm
PCOR5 OR5 20 mm
PCAMAZON AMAZON 28 mm
≥ Endcaps for BlueStreak®
Part no. Type
PE10C 10 mm dinghy batten crescent
PE10T 10 mm dinghy batten tie-in
PET15TT 15 mm dinghy batten triangle
PE20TRIINN 20 mm inner
PE20BLANK 20 mm blank
PEOUTOR1 20 mm outer OR1
PEOUTOR2 20 mm outer OR2-3
PEOUTOR4 20 mm outer OR4
PEOUTOR5 20 mm outer OR5
PEAMA Amazon
15/20 mm blank
15 mm triangle 20 mm triangle inner 20 mm triangle outer
10 mm crescent 10 mm tie-in
12
Phone: (+31) 297 237575 • [email protected]
Battens
≥ RBS Epoxy Leech Battens
Length E15180 E15200 E15230 E19230 E19265 E19300 E19350
800 mm E15180-080 – – – – – –
900 mm E15180-090 E15200-090 E15230-090 – – – –
1050 mm E15180-105 E15200-105 E15230-105 E19230-105 – – –
1250 mm – E15200-125 E15230-125 E19230-125 E19265-125 – –
1500 mm – – E15230-150 E19230-150 E19265-150 E19300-150 E19350-150
1800 mm – – – E19230-180 E19265-180 E19300-180 E19350-180
2100 mm – – – – E19265-210 E19300-210 E19350-210
2400 mm – – – – E19265-240 E19300-240 E19350-240
2700 mm – – – – – E19300-270 E19350-270
E15180
15 x 4.59 mm
E15200
15 x 5.1 mm
E15230
15 x 5.8 mm
E19230
19 x 5.8 mm
E19265
19 x 6.7 mm
E19300
19 x 7.6 mm
E19350
19 x 8.9 mm
13
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ RBS Epoxy Full Battens (Compression)
Length E15180 E15200 E15230 E19230 E19265 E19300 E19350
1200 mm E15180-120C E15200-120C E15230-120C E19230-120C E19265-120C – –
1500 mm – E15200-150C E15230-150C E19230-150C E19265-150C – –
1800mm – – – E19230-180 E19265-180C E19300-180C –
2100 mm – – – E19230-210C E19265-210C E19300-210C –
2400 mm – – – – E19265-240C E19300-240C E19350-240C
2700 mm – – – – E19265-270C E19300-270C E19350-270C
For ease of transport and storage, the compression battens below have one splice. (6100 mm has two)
Length E19265 E19300 E19350 E19400
3000 mm E19265-300C E19300-300C E19350-300C –
3600 mm – E19300-360C E19350-360C –
4200 mm – E19300-420C E19350-420C E19400-420C
5200 mm – – E19350-520C E19400-520C
6100 mm – – – E19400-610C
RBS splice
system
E15180
15 x 4.59 mm
E15200
15 x 5.1 mm
E15230
15 x 5.8 mm
E19230
19 x 5.8 mm
E19265
19 x 6.7 mm
E19300
19 x 7.6 mm
E19350
19 x 8.9 mm
14
Phone: (+31) 297 237575 • [email protected]
Battens
≥ RBS Roller Battens
Part no. Length
LIGHT/YELLOW
ERB050LTD 500 mm
ERB060LTD 600 mm
ERB070LTD 700 mm
ERB080LTD 800 mm
ERB090LTD 900 mm
ERB100LTD 1000 mm
ERB120LTD 1200 mm
STANDARD/BLUE
ERB070STD 700 mm
ERB080STD 800 mm
ERB090STD 900 mm
ERB100STD 1000 mm
ERB120STD 1200 mm
HEAVY/RED
ERB090HVY 900 mm
ERB100HVY 1000 mm
ERB120HVY 1200 mm
≥ RBS Hole End Cap
Part no.
ECH15160 15mm x .160"
ECH15180 15mm x .180"
ECH15200 15mm x .200"
ECH19180 19mm x .180"
ECH19200 19mm x .200"
ECH19230 19mm x .230"
ECH19265 19mm x .265"
ECH19300 19mm x .300"
ECH19350 19mm x .350"
ECH19400 19mm x .400"
ECH25400 25mm x .400"
≥ RBS Rocket Batten Tensioner
Part no. Batten Size - Part. no.
EBT10x5.0 10140 - 10160
EBT15x7.6 15180 - 15265
EBT19x6.7 19230 - 19265
EBT19x8.9 19300 - 19350
≥ Outer End Caps for RBS Battens
Part no.
EC15180 Batten Cap 15 mm x .180"
EC15200 Batten Cap 15 mm x .200"
EC19200 Batten Cap 19 mm x .200"
EC19230 Batten Cap 19 mm x .230"
EC19265 Batten Cap 19 mm x .265"
EC19300 Batten Cap 19 mm x .300"
EC19350 Batten Cap 19 mm x .350"
EC19400 Batten Cap 19 mm x .400"
NEW
15
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ Roller Batten
Part no. Product Description Width mm
Length mm
Weight gr
Recommended Boatsize
3141-030 single 40 300 53 <32ft
3141-030R reinforced 40 300 85 <40ft
3141-040 single 40 400 70 <32ft
3141-040R reinforced 40 400 112 <40ft
3141-050R reinforced 40 500 140 <40ft
3141-060 single 40 600 102 <32ft
3141-060R reinforced 40 600 t163 <40ft
3151-050 single 50 500 118 30-40ft
3151-050R reinforced 50 500 190 40-50ft
3151-060 single 50 600 145 30-40ft
3151-060R reinforced 50 600 230 40-50ft
3151-070 single 50 700 166 30-40ft
3151-070R reinforced 50 700 265 40-50ft
3171-070 single 70 700 235 >37ftft
3171-080 single 70 800 270 >37ft
3171-090 single 70 900 290 >37ft
3171-140 single 70 1400 360 >37ft
Rutgerson Roller Battens are established and wide spread as a solution to furling sails world-wide. The product was originally an innovation from Rutgerson and there is today an extensive range of sizes. The roller batten rolls up smoothly on the furling system and allows the boat owner to us e a roller furl cover. It can also be used in furling mainsails.
There are two versions, standard and reinforced. The reinforced battens will be indicated with an ”R”. The core consists of two curved battens made of Swedish stainless steel and the reinforced version has four curved battens for a stronger and stiffer result. Stainless steel is the optimal material for this purpose but like all materials, it has a limit. The material allows the batten to bend but if the product is used incorrectly and the batten is bent to a radius smaller than of approximately 50mm, the product cannot recover and it will be permanently bent.
Make sure not to bend the batten to a radius smaller than 50mm.
16
Phone: (+31) 297 237575 • [email protected]
Battens
≥ Stainless Steel Endcaps for vertical round battens
These end caps are available in a range of lengths and are made of stainless, acid proof steel and are supposed to be used together with the Batten connectors. NOTE: Both 1545-XX and 1547-XX are supposed to be bonded to the batten with Araldit 2045 or similar.
Dimensions (mm)
Part no. Ø Length A Length B Outer Ø B
1545-06-57 6 mm 57 97 8
1545-06-85 6 mm 85 125 8
1545-06-150 6 mm 150 250 8
1545-08-57 8 mm 57 97 10
1545-08-85 8 mm 85 125 10
1545-08-150 8 mm 150 250 10
1545-10-57 10 mm 57 97 12
1545-10-85 10 mm 85 125 12
1545-10-150 10 mm 150 250 12
≥ Batten Connectors Stainless Steel, divided
Rutgerson has introduced the first manufactured connector for round battens. It is made of stainless, acid proof steel. Joins battens of identical diameter. Especially suited for vertical battens in roller furl mainsails. The refined designs facilitate the connector to enter the roller furl mainsail. The connector is strong and easy to separate. The parts are glued upon the batten ends with Araldit 2015.
Part no. For batten Outer Ø mm Length mm Packed Qty
1547-06 6 8 200 10
1547-08 8 10 200 10
1547-10 10 12 200 10
≥ Batten Connectors, Aluminium
Special anodized aluminium connectors for use with round battens. Allows the joining of round battens of identical, or different diameters to form a tapered effect. Lock the batten into the connectors using double sided tape.
Part no. Connect Batten Ø mm Packed Qty
1548 - 0406 4 and 6 10
1548 - 0608 6 and 8 10
1548 - 0810 8 and 10 10
1548 - 1013 10 and 13 10
1548 - 1316 13 and 16 10
1548 - 0606 6 10
1548 - 0808 8 10
1548 - 1010 10 10
1548 - 1313 13 10
1548 - 1616 16 10
17
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ Round Sail Battens
Untapered stock battens in glass fibre plastic, colour white. Cannot be shipped rolled!
Part no. Length Ø mm Suitable endcaps
FL8806 6000 mm 6 MB 8106
FL8808 6000 mm 8 MB 8108
FL8810 6000 mm 10 MB 8110
FL8812 6000 mm 12 MB 8112
FL8816 6000 mm 16 MB 8116
≥ White End Caps for Round Battens, PVC
Part no. Ø mm Packed Qty
MB8106-1 6 100
MB8108-1 8 100
MB8110-1 10 100
MB8112 12 10
18
Phone: (+31) 297 237575 • [email protected]
Battens
≥ Glass Fiber Untapered Yellow Battens
Untapered stock battens in glass fibre plastic, colour yellow, coated
Part no. Length Width & thickness Suitable endcaps
MB8216-5 5000 mm 16 x 2.0 mm MB 8016
MB8316-5 5000 mm 16 x 3.0 mm MB 8016
MB8324-5 5000 mm 24 x 3.0 mm MB 8024
MB8332-5 5000 mm 32 x 3.0 mm MB 8032
MB8440-5 5000 mm 40 x 4.0 mm MB 8040
≥ White Endcaps, PVC
Part no. Width mm Packed Qty
3992-15 15 100
3992-18 18 100
3992-22 22 100
3992-30 30 100
≥ Triglass Contract Battens
Untapered stock battens in glass fibre plastic, colour white
Part no. Length Width & thickness Suitable endcaps
CT8509-5 5000 mm 9.5 x 3.0 mm MB 8009
CT8515-5 5000 mm 16 x 3.0 mm MB 8016
CT8518-5 5000 mm 18 x 1.8 mm MB 8018
CT8524-5 5000 mm 24 x 2.5 mm MB 8024
CT8531-5 5000 mm 32 x 3.0 mm MB 8032
CT8540-5 5000 mm 40 x 4.0 mm MB 8040
≥ Blue Endcaps, PVC
Part no. Width mm Packed Qty
MB8009 9 10
MB8016 16 10
MB8018 18 10
MB8024 24 10
MB8032 32 10
MB8040 40 10
NEW
19
Hardware Catalogue 2015 • Contender Sailcloth
Battens
PNPA276PNPA162
≥ Batten Pocket Protectors
Part no. Max. depth mm Width mm Packed Qty
HA151 4.5 35 1
HA51 14 27 1
HA351 18 40 10
HA451 15 25 10
HD6612 21 35 1
HD6614 24 50 1
HB3290 25 47 10
≥ Batten Receptacles and Connector
Part no. Description
PNPA162 Adjustable, 30 x 10 mm Batten, M10
PNPA276 Adjustable, 30 x 14 mm Batten, M10
PNPA285-10 Adjustable, 28 x 12 mm batten, M10
HA419S Non Adjustable, 40 x 6 mm, 16 mm round, M10
HA419L Non Adjustable, 53 x 10 mm, 22 mm round, M10
HA102 M10 stud only with toggle to suit slides for full batten sails
PNPA285
HA151 HA351 HB3290 HA51 HA451 HD6612/14
Batten Fitting HA419 with M10 stud HA 102
NEW
NEW
NEW
20
Phone: (+31) 297 237575 • [email protected]
Battens
≥ New Adjustable Batten Receptacle 1585
Rutgerson adjustable batten receptacles are manufactured in a highly durable, UV resistant composite material and can be used with all M10 threaded battcars and bolts. 1585 is our latest batten receptacle, suitable for boats up to 33ft. It is our most user-friendly receptacle yet. No tools are required to open the lid, just pull the clip. Furthermore, the receptacle has no loose parts, the lid is attached to the body. The batten is tensioned with a screw, which is located next to the batten entrance. A tensioning scale is clearly visible on the lid and a coloured marker indicates how tensioned the batten is. The 1585 is also user-friendly to sailmakers because it is very easy to install on the sail. The reason for this is the comparatively few fastening points, there are only fve.
1590 - for Flat Battens Boat size 30 - 40 feet
1580 - for all types of BattensBoat size 35 feet
1595 - for Bluestreak & RBS Battens Boat size 30 - 40 feet
1490 1490-1
Batten Fitting 1490-1G with Battcar 1530-11-03
NEW
21
Hardware Catalogue 2015 • Contender Sailcloth
Battens
≥ Batten Receptacles
The Rutgerson full batten receptacle range sets the standard for quality, durability, easy handling and performance. The fittings are made of a very light and extremely durable composite material with very high UV-resistance.
Part no. Max batten width and thickness
1490 12 mm round - flat 42 mm x 6 mm, White
1490-1 1490 without Shackle and without front end
1490G 12 mm round - flat 42 mm x 6 mm, Dark Grey
1490-1G 1490 G without Shackle and without front end
1580 flat 10 mm, 20 mm x 4 mm, 30 mm x 6 mm, 20 mm x 10 mm
1585 flat up to 25 mm x 10 mm - up to 10 mm round
1590 flat 40 mm x 6 mm
1595 flat 25 mm x 10 mm
1596 10 mm - 12 mm round
≥ Limousine Big Boat Batten Receptacle
The Rutgerson 1600 Limousine batten receptacle is machined from solid aluminium and black anodized black. It is now filling the gap in the boat segment for applications on monohulls approximately 55' in length and above. The battens are front loading via the unique quick release cover plate that can be removed without tools. Available in both M10 and M12 thread sizes.
Part no. Product Description Length mm
Width mm
Max Size Flat Batten mm
Max Round Batten mm
Weight mm
1612 Batten receptacle system C, M12 153 67 34 x 14 22 475
1610 Batten receptacle system C, M10 153 67 34 x 14 22 475
NEW
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Sail HardwarePress Rings • Headboards and Clewboards • BattcarsSlides and Shackles • Cleats • Rings • Hanks
25
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Super Rings
The SR-rings are made of high grade stainless steel. They are light, strong, thin and corrosion resistant. Easy to install or remove, reliable and competitively priced. Rutgerson Super Rings are the benchmark for sailmaking rings and used by the majority of sailmakers in the world today. The rings are made of three parts: toothed washer, centre piece and plastic insert. Remember, only Rutgerson rings have their own ingenious ring remover! DO NOT USE IN COMBINATION WITH CARBON FIBRE REINFORCED SAILCLOTH.
Part no. Ø mm Hole Punch mm
Press force on dies Approximately Max. Load kg
Packed Qty
1000-10 10 11 by hand 150 - 250 100
1000-12 12 13 by hand 300 - 350 100
1000-14 14 15 3 - 5 ton / by hand 350 - 500 100
1000-14L 14 15 3 - 5 ton / by hand 350 - 500 100
1000-20 20 22 11 - 13 ton 700 - 1500 100
1000-20LD 20 22 11 - 13 ton 600 - 1125 100
1000-25 25 28 15 ton 1000 - 1600 100
1000-25LD 25 28 15 ton 750 - 1300 100
1000-35 35 38 22 ton 1455 - 2045 50
1000-45 47 48 25 ton 2000 - 2500 50
1000-55 55 60 25 ton (1st) 30 ton (2nd) 2800 - 3200 10
≥ Titanium Super Rings
The new titanium ring is the most time efficient solution for carbon cloth on the market. It can be pressed directly into the carbon sail. Titanium is a non-conductive material. It is the best insurance against corrosion.
Part no. Ø mm Hole punch mm
Press force on dies Approximately mm Max. Load kg
Packed Qty
3000-14 14 15 3 - 5 ton/by hand 375 30
3000-20 20 22 11 - 13 ton 840 20
3000-25 25 28 15 ton 1190 20
3000-35 35 38 22 ton 1530 20
3000-45 45 48 25 ton - 10
26
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Hole Punchers
Part no. For Ring No Hole Ø mm
LO5 Grommet 000 5
LO6 Grommet 00 6
LO9 Grommet 0 9
1060-11 SR - 10 11
1060-13 SR - 12 13
1060-15 SR - 14 15
1060-22 SR - 20 22
1060-28 SR - 25 28
1060-38 SR - 35 38
1060-48 SR - 45 48
1060-60 SR - 55 60
HY1 cutting pad 350 x 350 x 25 mm
≥ Super Ring Press Tools
The press tools for SR10 and SR12 are suitable for hand hammering operations. The SR14 can be applied manually or in combination with a hydraulic press. All other types should only be applied with a hydraulic press. The SR55 requires a two-step process. Step 1 for the correct allignment and step 2 for the fixation. The press tool is a three piece tool (see drawing).
Part no. For SR-Ring Press force on dies
1030-10 # 10 by hand
1030-12 # 12 by hand
1030-14 # 14 3-5 ton / by hand
1030-20 # 20 11-13 ton
1030-25 # 25 15 ton
1030-35 # 35 22 ton
1030-45 # 45 25 ton
1030-55 # 55 25 ton (1st) 25 ton (2nd)
Upper die
Toothed
washer
Cloth
Plasticwasher
Centerpiece
Lower die
HY1
27
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Super Ring Remover Tools
Quickly presses rings from the sail without damaging or weakening the structural integrity of the sailcloth, and makes it possible to fit a new ring in the same hole, with the same strength.
Part no. Ref # For SR-Ring
1040-14 RP14 # 14
1040-20 RP20 # 20
1040-25 RP25 # 25
1040-35 RP35 # 35
1040-45 RP45 # 45
1040-55 RP55 # 55
≥ Spur Toothed Grommets Nickel and Tools
Part no. Size Packed Qty Øi mm Part. no Tool
GH68430 000 1000 4 G6930
GH68420 00 1000 5 G6920
GN0 Stimpson 0 144 8 GT0
GN1 Stimpson 1 144 11 GT1
GN2 Stimpson 2 144 12 GT2
GN3 Stimpson 3 144 14 GT3
GN4 Stimpson 4 144 17 GT4
GN5 Stimpson 5 144 19 GT5
A
C
B
Place the pressed ring on Lower Die (B) with the teethed washer
on top and the rolled liner washer on the bottom, seated in the
Lower Die (B).
Place the Punch (A) over the guide post with Cutting Edge
down on top of the ring. The Cutting Edge is recognized by
its “ concave” shape.
Press untill the bottom of the ring has sheared completely free of
the toothed ring or untill the bottom of the red band on the punch
has been reached.
To remove the remaining toothed washer, place the
patch on top of the support cup (C). Use a screwdriver
or something similar to remove the toothed washer.
28
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Mainsail System Headboards
The headboards are black anodized. They are easily attached to the headboard car. Please find the specifications in the card below.
Part no. Product Description Aspect Ratio Thickness mm Weight Vertical SWL Webbing Slots
A1 Standard A1 156 x 140 40 deg 4 120 g 850 kg 3 x 30 mm
A2 Square top A2 157 x 189 90 deg 4 160 g 850 kg 5 x 30 mm
B1 Standard B1 217 x 194 40 deg 6 295 g 1350 kg 4 x 30 mm
B2 Square top B2 218 x 246 90 deg 6 350 g 1350 kg 5 x 30 mm
C1 Standard C1 180 x 199 40 deg 10 485 g 2800 kg 3 x 40 mm
C2 Square top C2 180 x 237 90 deg 10 600 g 2200 kg 4 x 40 mm
Monohull headboard A1
Multihull and fat headboard A2
Monohull headboard B1
Multihull and fat headboard B2
Monohull headboard C1
Multihull and fat headboard C2
For price information of the car system; see page 38
SYSTEM A SYSTEM B SYSTEM C
156
mm
157
mm
217
mm
218
mm
180
mm
180
mm
140 mm
189mm
194 mm
246 mm
199 mm
237 mm
29
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Quick Flex Fitting Headboards, for liner fastening
The QFF headboard are available in a wide range of sizes to cover the required range of mainsails for boats up to approximately 50ft. Available in both black and silver 25μm anodized aluminium, this standard fitting only requires liners and no additional rivets. This makes the assembly of the boards quick and easy, which saves valuable time in sailmakers production by being more efficient. As all boards can be turned to make any straight side the vertical top side, this product will also decrease product variances in stock. Webbing to add strength and/or spreading loads can be applied through the liners if necessary.
Part no. Product Dimensions Colour Liners required Packed Qty
1115-070S 115 x 080 x 2 mm Silver 3 x 19 10
1115-070B 115 x 080 x 2 mm Black 3 x 19 10
1115-115S 151 x 115 x 3 mm Silver 3 x 19 10
1115-115B 151 x 115 x 3 mm Black 3 x 19 10
1115-121S 160 x 135 x 3 mm Silver 3 x 19 10
1115-121B 160 x 135 x 3 mm Black 3 x 19 10
1115-150S 175 x 150 x 3 mm Silver 4 x 19 4
1115-150B 175 x 150 x 3 mm Black 4 x 19 4
1115-175S 215 x 185 x 3 mm Silver 4 x 19 4
1115-175B 215 x 185 x 3 mm Black 4 x 19 4
1115-070
1115-150
1115-115
1115-175
1115-121
30
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ One Design Headboards
These headboards are suitable for the majority of One Designs, 1102-113 has webbing slots for extra strong attachments in the sail.
Part no. A mm B mm Thickness mm Liners pcs Packed Qty
1102-112 112 140 2 1 x 19 20
1102-113 112 140 2 3 x 19 20
≥ Heavy Duty Headboards
These heavy duty headboards are designed to avoid the headboard from hooking on the backstay and/or Lazy Jack lines when hoisting.
Part no. A mm B mm C mm Thickness mm
Liners pcs Packed Qty
1120-125 125 140 150 2.5 4 x 19 2
1120-170 170 195 205 3.0 4 x 19 2
1120-210 210 230 245 4.0 5 x 19 2
≥ Composite Headboards
The FFC Flex Fitting Composite headboard is available in a wide range of sizes and thicknesses, and is a cost efficient solution for dinghy and One-Design applications. These headboards are made in a strong polyamide composite material. All headboards have 5 mm rivet holes. DO NOT PUT TO MUCH PRESSURE ON THE LINERS WHEN PRESSING!!
Part no. Dimension A mm Dimension B mm Thickness mm Liners
1104-090 70 90 2 1 x 14 mm
1105-090 70 90 2 1 x 14 mm
1105-115 100 115 3 3 x 14 mm
1105-135 115 135 4 3 x 19 mm
≥ Aluminium Headboards
The two larger sizes have webbing slots for extra strong attachments in the sail. There is a webbing slot along the luff-side to make it possible to “web on”.
Part no. A mm B mm Thickness mm Liners pcs mm Packed Qty
1102-075 75 103 2 1 x 19 20
1102-090 90 120 2 1 x 19 20
1102-115 115 162 2 1 x 19 20
1102-135 135 185 2 1 x 19 20
1103-135 135 185 3 1 x 19 20
1103-160 160 220 3 1 x 19 20
B
A
1105-115
A
B
1105-135
A
B
1104-0901105-090 (black)
31
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Quick Fitting Clewboards, for liner fastening
These clewboards are designed to quickly and easily attach to the sail using just 19 mm liners eliminating the time consuming task of installing rivets. Available in either silver or black in three different sizes.
Part no. Product Description Thickness mm Liners required
1191-018S QFI Clewboard #3 Silver 3 5 x 19
1191-018B QFI Clewboard #3 Black 3 5 x 19
1191-025S QFI Clewboard #2 Silver 3 6 x 19
1191-025B QFI Clewboard #2 Black 3 6 x 19
1191-030S QFI Clewboard #1 Silver 4 7 x 19
1191-030B QFI Clewboard #1 Black 4 7 x 19
#3 1191 - 18x #2 1191 - 025X
#1 1191 - 030X
≥ Clewboards, for rivet and liner fastening
A range of aluminium clewboards for self tacking jibs. All these clewboards use 4.5 mm rivets.
Part no. Product Description
A mm B mm Thickness mm
Liners required
Rivits required
Packed Qty
1190-050 Clewboard #3 190 50 2 5 x 14 5 10
1190-070 Clewboard #2 230 70 2 5 x 14 14 10
1190-080 Clewboard inverted 275 75 2 6 x 14 15 10
1190-090 Clewboard #9 260 90 3 5 x 19 14 10
1190-050 1190-0801190-0701190-090
32
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Carbon Fibre Products
Through extensive research and testing, Rutgerson has set up a Carbon Fibre pre-preg lamination process. They can now offer clewboards, headboards and other products in carbon fibre.
The new carbon fibre-range outperforms conventional products due to the extraordinary strength and bending properties of carbon fibre. All carbon fibre products are manufactured on individual request.
Saving weight is critical for racing. An entire market has evolved due to the increasing demand for lighter and stronger fittings. For example, the most critical location on the boat to save weight is the top of the sail. Carbon fibre headboards would be the optimal solution.
Due to the flexible facilities, there is have the possibility to produce customised products made of carbon fibre, not only including headboards and clewboards but all kinds of products.
33
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Hollow Tubular Stainless Steel Rivets
Stainless steel, hollow tubular rivets for headboards and clewboards
Part no. Length mm Outer Ø mm Packed Qty
2140-06 6 4.5 500
2140-08 8 4.5 500
2140-10 10 4.5 500
2140-12 12 4.5 500
2140-14 14 4.5 500
2140-16 16 4.5 500
Closing tool for hollow tubular rivets for headboards and clew boards. This tool only can be used in a hydraulic-, fly- ,toggle-, or cam-operated press.
Part no.
1240 two piece closing tool SS Rivets
≥ Semi Tubular Aluminium Rivets
Part no. L1 mm Li mm Ø mm B mm Packed Q TY
AN1 10.0 3.5 4.6 9.5 100
AN2 12.5 3.5 4.6 9.5 100
AN3 15.0 3.5 4.6 9.5 100
1230 closing tool for AN 1-3 1
≥ Liners
Stainless Steel Liners for headboards and clew boards
Part no. Outer Ø mm
1250-14 14
1250-19 19
≥ Closing Tool for Liners
Part no. Liner mm
1260-14 14
1260-19 19
34
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Blocks
The Rutgerson block assortment is unique in its design and functionality. The key to its success is that both the sheave and the cheeks are produced from a high-tech composite material of such a great strength that no stainless steel reinforcement is needed. Consequently, the overall weight is dramatically reduced. The new material has “smooth touch” properties and the work load is clearly marked in order to avoid uncertainty. Spherical plain bearings are used for our assortment, which render the blocks very strong and completely maintenance free. Plain bearings will never deform under static high loads like ball bearings and our blocks do not require the initial excess of power for the sheave to start moving, which is a common problem with ball bearing blocks.
Product# Sheave Ø mm (A)
Length mm (B) Shackle pin Ø mm (C)
Safe working load kg
Breaking load kg
Rope Ø mm Weight
Single Blocks
B300301B 35 55 4 450 850 3-8 50
B300501B 50 80 5 700 1250 4-12 116
B300601B 60 94 6 1150 2100 6-14 205
B300801B 80 13 10 2000 3600 6-14 570
Webbing Blocks
B300305B 35 55 - 450 850 3-8 35
B300505B 50 80 - 700 1250 4-12 80
B300605B 60 94 - 1150 2100 6-14 155
B300805B 80 130 - 2000 3600 6-14 333
Single block Webbing block
35
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Clewblocks
Rutgerson’s Clewblocks come with 60, 80 or 100 mm removable delrin sheaves and are available in both silver and black anodized cheek plates. The webbing slots are smoothly rounded in order to prevent chafe. The sheave can easily be removed by unscrewing the M5 bolt that assembles the construction through a SS socket.
Part. no. Colour Sheave Ø mm Cheek mm For webbing mm Max Rope mm Approx Swl
1692-060S Silver 60 3 30 12 1200 kg
1692-060B Black 60 3 30 12 1200 kg
1692-080S Silver 80 4 40 16 1650 kg
1692-080B Black 80 4 40 16 1650 kg
1692-100S Silver 100 4 40 16 3000 kg
1692-100B Black 100 4 40 16 3000 kg
152
27
82º
104
Ø60
228
42
84º
153
Ø100
196
37
84º
132
Ø80
36
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Pressure absorbing Slide & battcar mast selection guide
With roughly 120.000 units sold since 2003, the Rutgerson Battcar has proven to be a winner for sailors on all oceans and in all environments. Available for a wide variety of masts. This fullbatten car makes the mainsail safer and simpler to handle.
The numbering system works as follows:
- The first 4 digits determine the model of the car.
- The middle 2 digits determine the mast profile they fit.
- The last 2 digits determine the attachment to the sail.
Rutgerson Battcar ref #
Battcar ref --> 1525-11 1530-11-xx 1535-11-xx
1525-16 1530-16-xx
1525-19 1530-19-xx
1525-20 1530-20-xx
1525-23 1530-23-xx 1535-23-xx
1526-11 1531-11-xx 1536-11-xx
1528-23 1540-23-xx
Equivalent Holt Allen
HA89 HA90 HA91
Sparcraft
F135, F195, F305, F385, F460, I620, S622, I830,
S830
NG60, NG70, NG80, NG86, F580, F740,
F1060, F1395, S1630, S2100, F2390, F3360,
F4600
F35, F50, F67, F78, F101, S137,
S180, S260, S330, IMS80,
IMS256
NG60, NG70, NG80, NG86, NG105, F580, F740,F1060,
F1395, F2390, F3360,F4600
Seldén
1) 1335
C156, C175, C193, C211,
C227, C245, C264, C285,
C304
John Mast 135D, 148D, 150D, 165D, 167D, 185D, 186D, 208D, 222D, 245D, 280D, 305D,
335D
220E, 262E, 290E
150E, 116E, 125E220E, 262E,
290E
Z Spars Z301, Z351, Z380, Z401, Z501, Z531, Z601,Z602, Z701, Z702
Z209, Z1001, Z1250, Z1400
Z170, Z190, Z230, Z265
Z1001, Z1250, Z1400
Soromap
NF200, NF270, NF350, NF430, NF540, NF710,
NF1410
Note:
For application in monohull mainsails >50m2 (592sq ft.) use the High Load Battcar versions with reference no 1535-XX-XX. It is also mandatory to applicate all Rutgerson battcars with the assembly screw pointing upwards in the mast gate. It is not recommended to use any of Rutgerson Battcars in mainsails >80m2 (861sq ft.).
1) If the Seldén mast is equipped with a sail entry gate with a cassette with tongue and rubber spring pad, it has to be converted to a track gate insert for fullbatten sails (Seldén part no 505-516-01, 505-524-01) For information regarding applications in other mast sections than the above specified, please contact us.
37
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Battcar Attachment System
≥ Battcar General Dimensions
1530-XX-03
Alu Fork with Swivel
The 1530-XX-03 battcar has an aluminum fork with swivel. To be used with receptacle 1490.
1530-XX-09
SS M10 Extended Thread
The 1530-XX-09 has an extended M10 thread adapter and stainless steel base. Use with 1580, 1590 or 1595. Sail off set is 64 mm.
The 1530-XX-05 has a M10 thread adapter and stainless steel base. Use with 1580, 1590 or 1595. Sail off set is 39 mm.
1530-XX-05
SS M10 Thread
Body 11 mm
1530-11-XX & 1535-11-XX
Body 20 mm
1530-20-XX
Body 16 mm
1530-16-XX
Body 23 mm
1530-23-XX & 1535-23-XX
Body 19 mm
1530-19-XX
Body 16 mm with big wheel
1531-16-XX
Body 11 mm with big wheel
1531-11-XX
Body 23 mm with big wheel
1531-23-XX
The 1530-XX-10Battcar is designed to use with a webbing strap. With removable pin.
1530-XX-10
Intermediate Capstan
The 1525-XX Battcar is designed to use with a webbing strap. No removable pin.
1525-XX
Intermediate
38
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ BATTCAR
11 mm (for Selden 1335 mast profile)
1525-11 Intermediate
1530-11-10 Intermediate Capstan
1530-11-03 Alu Fork, with Swivel
1530-11-05 SS M10 Thread
1530-11-09 SS M10 Extended Thread
1535-11-05 SS M10 Thread, HIGH LOAD
1535-11-10 Intermediate, HIGH LOAD
A111 Headboard Car System A
B11 Headboard Car System B
16 mm (equivalent HA 89)
1525-16 Intermediate
1530-16-10 Intermediate Capstan
1530-16-03 Alu Fork, with Swivel
1530-16-05 SS M10 Thread
1530-16-09 SS M10 Extended Thread
A16 Headboard Car System A
19 mm (equivalent HA 90)
1525-19 Intermediate
1530-19-10 Intermediate Capstan
1530-19-03 Alu Fork, with Swivel
1530-19-05 SS M10 Thread
1530-19-09 SS M10 Extended Thread
A19 Headboard Car System A
20 mm (for Selden C Track mast profile)
1525-20 Intermediate
1530-20-10 Intermediate Capstan
1530-20-03 Alu Fork, with Swivel
1530-20-05 SS M10 Thread
1530-20-09 SS M10 Extended Thread
1535-20-05 SS M10 Thread, HIGH LOAD
1535-20-10 Intermediate, HIGH LOAD
A20 Headboard Car System A
39
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ BATTCAR
23mm (equivalent HA 91)
1525-23 Intermediate
1530-23-10 Intermediate Capstan
1530-23-03 Alu Fork, with Swivel
1530-23-05 SS M10 Thread
1530-23-09 SS M10 Extended Thread
A23 Headboard Car System A
1535-23-05 SS M10 Thread, HIGH LOAD
1535-23-10 Intermediate, HIGH LOAD
B23 Headboard Car System B
1528-23 Intermediate Capstan Limousine
1540-23-05 SS M12 Limousine
C23 Headboard Car System C
11 mm Big Wheel
1526-11 Intermediate
1531-11-10 Intermediate Capstan
1531-11-05 SS M10 Thread
A112 Headboard Car System A
16 mm Big Wheel
1526-16 Intermediate
1531-16-05 SS M10 Thread
23 mm Big Wheel
1526-23 Intermediate
1531-23-05 SS M10 Thread
≥ Battcar limousine, for boats up to 60ft
Rutgerson is now filling the gap in the boat segment for cruising applications on monohulls up to approximately 60' in length. Available in 23mm profile width, this battcar will cover the majority of the larger spar sections from Sparcraft, as well as other HA91 profiles. It is manufactured in aluminium from a solid extrusion, which makes it extremely strong. Available in two versions. The RU-1540-23-05 with M12 stainless steel thread for full batten applications, fx the 1612 big boat batten receptacle. The RU-1528-23 is a composite intermediate version for 25mm webbing
1540-23-05 1528-23
40
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Rutgerson Headboard Cars
The headboard cars in black anodized aluminium are robust and easily attached to the corresponding headboard. The system is constructed with either 2 or 3 cars that can easily be disassembled from the cheek plate with a retractable circlip on system A and B or Allen key on system C. The initial version of the headboard cars has been upgraded with jointed battcars. The battcars can move independent of each other, which means that the headboard cars can more easily enter the track gate.
FIND CORRESPONDING HEADBOARDS AND THEIR SPECIFICATIONS UNDER CHAPTER BOARDS.
System Car system Mono Sail area Multi Sail Area weight
A 2 x 1530 < 38ft 40 m2 < 31 ft 28 m2 230 gr
B 3 x 1535 < 47 ft 55 m2 < 38 ft 40 m2 357 gr
C 2 x 1540 < 60 ft 80 m2 < 47 ft 55 m2 740 gr
≥ LUFFSHUTTLE: Multi roller-car system for fully battened sails
Designed and manufactured by Contender Italy, these batten luff shuttles are similar to the Rutgerson 1530 series, but each car comes with nine different carbon slides so they will fit almost all mast tracks. With a stainless steel M10 thread the cars are compatible with most batten receptacles. An intermediate shuttle slide car is also available to compliment the luff shuttle suitable for boats up to 38 feet. Each pack of a luff shuttle comes complete with all the different attachments.
Part no.
LUFFINNER with aluminium joint for webbing connection with sail
LUFFBATT with 10 mm RVS steel ball joint for connection to batten fitting
SYSTEM A SYSTEM B SYSTEM C
sail
mast
3 c
m
41
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
A
B
Db
CE F
≥ Clew Slider
Part no. L mm B1 mm Ø mm Packed Qty
SS0760 76 4 11.7 10
≥ Rutgerson Single Slug Slides
Part no. Product description Length mm Ø mm Plate thickness mm
Approx. SWL kg Packed Qty
1201 Slug Slide Ø7 mm 48 7 2 250 10
1202 Slug Slide Ø12 mm 54 12 2 500 10
1203 Slug Slide Ø9 mm 48 9 2 500 10
1204 Slug Slide 12 mm 54 - 2 500 10
≥ Rutgerson Super Ring Integral Slug Slides
The stainless steel integral slug slides fit the Rutgerson Super Ring System. Using the corresponding sized SR Ring, the slug slide can be pressed into the sail in one operation.
Part no. SR ring Slug slide A mm B mm b mm C mm E mm F mm Packed Qty
1012-07 14 1201 48 7 2 7 28 34 10
1012-09 14 1203 54 9 2 9 33 47 10
1014-07 20 1201 48 7 2 7 28 34 10
1014-09 20 1203 54 9 2 9 33 47 10
1014-12 20 1204 61 12 2 12 31 45 10
1016-09 25 1203 54 9 2 9 33 47 10
1016-12 25 1204 61 12 2 12 31 45 10
1201 1203 1202 1204
NEW
42
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Seldén/Kemp Slides
Special slug slides, Nylon, White. Black slide for full batten sails
Part no. L mm B1 mm
Foot mm Packed Qty
HA458 30 4 15 100
HA558 25 4 11 100
2241-1030 30 8 20 100
2241-1040 40 8 20 100
HA1158 45 45 15 10
≥ Round Slug Slides
Round slug slides, Nylon, White. Black slides for full batten sails
Part no. L mm B1 mm B2 mm Packed Qty
HA158 21 3 9 50
HA258 25 3 14 50
HA358 22 3 13 100
HA1058 45 4 7 10
HA958 45 4 9 10
HA758 45 4 115 10
≥ Flat Internal Track Slides
Internal track slides, Nylon, White. Black slides for full batten sails (45 mm long)
Part no. for track Packed Qty
HA89 16 mm 100
HA90 19 mm 100
HA91 22 mm 100
SS0662 25 mm 100
HA95 16 mm 10
HA92 19 mm 10
HA96 22 mm 10
≥ Slug Slides with Stainless Steel Bail
Part no. Length mm Ø mm Packed Qty
HB1416 25 7.5 10
HB1417 25 9.0 10
HB1419 30 11.0 10
HB1418 30 12.5 10
L
O
43
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Snap on Shackles - Plastic
Part no. La mm Li mm Bi mm Packed Qty
HA749 37 20 9 100
HA849 39 22 9 100
SS0461 38 23 7 100
SS0459 46 30 8 100
SS0458 51 42 8 100
≥ Screw on Shackles - Stainless Steel
Part no. La mm Li mm Bi mm Ø
PI160041 23 15 10 M4
PI160051 28 17 12 M5
PI160042 28 20 11 M4
PI165206 36 23 16 M6
PI160052 36 24 16 M5
PI165251 36 25 13 M5
PI160043 36 27 11 M4
PI160053 47 36 16 M5
≥ Screw on Shackles - Plastic
Part no. La mm Li mm Bi mm Packed Qty
HA349 26 18 3 100
HA449 44 27 6 100
HA549 53 33 6 100
HA1049 61.5 45 10 10
HA
HA
SS
La
Bi
Li
ÿ
44
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Luff Protectors
Transparant plastic material, for piston hanks
Part no. LL mm La mm For use with size
CT151 34 60 “0”, “1”
CT152 37 65 “2”
CT153 47 73 “3”
CT154 54 80 “4”, “5”
≥ Plastic Jib Hanks
Part no. Forestay Length mm Packed qty
HA144 max. 3 mm 31 100
HA244 max. 4 mm 33 100
PNPA88A max. 6 mm 40 50
PNPA088A
≥ Sail Blocks
The solution for lazy jack and/or covers for furling sails
Part no. L mm B mm Ø mm Packed Qty
HA886 40 6 16 100
RMRS01 sew on eyelets
RMRS03 sew on blocks
HA886 RMRS01 RMRS03
45
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Snap-on Hanks
Stainless steel
Part no. Length mm Forestay mm Size
SR2486 50 7.5 0
SR2483 55 9.0 1
SR2487 65 11.0 2
SR2489 80 13.0 3
SR2488 90 17.0 4
SR2490 110 24.0 5
Bronze with stainless steel spring
SR72486 50 7.5 0
SR72483 55 9.0 1
SR72487 65 11.0 2
≥ Piston Hanks
Brass, made in Sweden
Part no. Length mm Forestay mm Size
HK5040 40 7 0
HK5050 50 9 1
HK5060 60 12 2
HK5070 70 16 3
HK5080 80 17 4
HK5090 90 21 5
HK5100 100 23 6
≥ Wichard Web on Snap Hooks, extra strong
Part no. Length mm Ø1 mm BRL kg WL kg
SR2381 75 10 1600 880
SR2382 100 14 4000 1680
≥ Wichard Web on Snap Hooks
Part no. Length mm Ø1 mm BRL mm WL mm
SR2480 50 6 300 200
SR2481 75 10 700 480
SR2482 100 13 1500 1120
46
Phone: (+31) 297 237575 • [email protected]
Sail Hardware
≥ Leechline Cleats
Part no. Type rope Ø mm
material total length mm
distance holes mm
width mm rivet Ø
CL212 Cleat Star Board 2 - 5 Nylon 70 49 21 4.5
CL212BP Backplate 2 - 5 Nylon 71 49 21 4.5
CL212A Cleat Cover 2 - 5 Nylon 70 49 21
CL214W Cleat Port 2 - 5 Nylon 70 49 21 4.5
CL221 Dinghy-cleat 0 - 3 Nylon 43 33 17 3
CL233 Sail Line-cleat 2 - 6 Nylon 57 - 34 sew on
CL241 Racing Sail Line (starboard) 3 - 6 Aluminium 70 49 21 4.5
CL273 Racing Sail Line (port) 3 - 6 Aluminium 70 49 21 4.5
CL258 Racing Fine Line (starboard) 3 - 6 Aluminium 70 49 21 4.5
CL259 Racing Fine Line (port) 3 - 6 Aluminium 70 49 21 4.5
CL267 Racing Sail Edge cleat 1 - 4 Nylon/Alu - - - 14
CL269 Sail Edge cleat 1 - 4 Nylon - - - 14
≥ Gran-Segel® Cleats
Part no. Size For line Ø mm Length mm For use on
GS1 small 1 - 2.5 30 Surf and dinghy sails
GS2 medium 1 - 4.0 45 Yachts up to 10 m
GS3 large 2 - 5.0 60 Yachts up to 15 m
CL221 CL212BP
CL212 CL214WCL212A
CL259
CL241
CL267
|-------- 50 mm --------|
CL269
CL233
CL233BP
CL258
47
Hardware Catalogue 2015 • Contender Sailcloth
Sail Hardware
≥ Round Rings
High grade stainless steel A304
Part no. Øi mm thickness mm
CT0711 20 3
CT0712 25 4
CT0713 25 5
CT0714 30 4
CT0716 30 5
CT0717 35 6
CT0718 30 6
CT0719 40 5
CT0720 40 6
CT0721 40 8
CT0723 45 8
CT0724 50 6
CT0725 50 8
CT0727 50* 10
CT0731 75* 10
CT0733 100* 10
* available on request
≥ D-rings
High grade stainless steel A304
Part no. Bi mm Thickness mm
CT0911 20 3
CT0912 25 3
CT0914 25 4
CT0918 25 5
CT0913 30 3
CT0915 30 4
CT0916 35 4
CT0917 40 4
CT0921 40 5
CT0922 45 5
CT0923 50 5
CT0928 50 6
All available on request
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Webbing & VelcroPolyester Webbing • Dyneema WebbingColoured Polyprop Webbing • Original Velcro
51
Hardware Catalogue 2015 • Contender Sailcloth
Webbing & Velcro
≥ White Polyester Webbing
Roll length 100m, except light weight = 50m, sold per roll
Part no. Width mm Breaking Load
Light weight
GU101110 10 --
Standard weight
GU111120 20 710 kg
GU111125 25 907 kg
GU111130 30 1170 kg
Heavy weight
GU121120 20 610 kg
GU121125 25 825 kg
GU121130 30 968 kg
GU121140 40 1275 kg
GU121150 50 1630 kg
Extra heavy weight
GU131125 25 1295 kg
GU131130 30 1530 kg
GU131140 40 1985 kg
GU131150 50 2550 kg
Super heavy weight
GU141140 40 2190 kg
≥ Dyneema® Webbing
Roll length 50 m, sold per roll
Part no. Width mm Colour Breaking Load
DW025 25 White 1200 kg
DW050 50 White 2500 kg
52
Phone: (+31) 297 237575 • [email protected]
Webbing & Velcro
≥ Polypropylene Webbing
Part no. Width mm Colour Breaking Load
GU201120 20 White 225 kg
GU202220 20 Dark Blue 245 kg
GU209020 20 Black -
GU201125 25 White 245 kg
GU202225 25 Dark Blue 245 kg
GU203025 25 Green 245 kg
GU204025 25 Yellow 245 kg
GU206025 25 Red 245 kg
GU209025 25 Black -
GU209125 25 Silver 245 kg
GU209925 25 Rainbow 305 kg
GU202230 30 Dark Blue -
GU209030 30 Black -
GU209130 30 Silver -
GU202240 40 Dark Blue 448 kg
GU203040 40 Green 448 kg
GU206040 40 Red 448 kg
GU209040 40 Black -
GU209140 40 Silver -
GU202250 50 Dark Blue 458 kg
GU209050 50 Black 458 kg
GU209950 50 Rainbow -
Full rolls of 100 m only
53
Hardware Catalogue 2015 • Contender Sailcloth
Webbing & Velcro
≥ Original Velcro® - Hook and Loop
Part no. Hook Part no. Loop Width mm Colour Length m
VK510 VK511 16 White 25
VK310 VK311 20 White 25
VK390 VK391 20 Black 25
VK110 VK111 25 White 25
VK190 VK191 25 Black 25
VK410 VK411 30 White 25
VK490 VK491 30 Black 25
VK610 VK611 38 White 25
VK210 VK211 50 White 25
VK290 VK291 50 Black 25
≥ Original Velcro® adhesive
Part no. Hook Part no. Loop Width mm Colour Length m
VK312 VK313 20 white 25
VK392 VK393 20 black 25
VK112 VK113 25 white 25
VK182 VK183 25 beige 25
VK192 VK193 25 black 25
VK412 VK413 30 white 25
VK492 VK493 30 black 25
VK212 VK213 50 white 25
VK292 VK293 50 black 25
54
Phone: (+31) 297 237575 • [email protected]
Webbing & Velcro
≥ Polyester Webbing, coloured
Part no. Colour Width mm Length m
GU179020 Black 20 100
GU179025 Black 25 100
GU172250 Blue 50 100
GU176050 Red 50 100
GU179050 Black 48 100
≥ Batten Pocket Elastic, 50 m roll
Part no. Width mm
HB9019 20
HB9025 25
HB9038 38
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Seaming & SewingSewing Threads • Seaming Tapes • Sailmaking NeedlesSailmaking Tools
57
Hardware Catalogue 2015 • Contender Sailcloth
Seaming & Sewing
≥ Contender Solbond - bonded sewing thread
Solbond is produced by the German company Zwicky who are recognised as the leading producer of industrial sewing thread. Solbond offers excellent sewability, outstanding abrasion resistance and high breaking strength as well as UV resistance. Solbond has been developed for yacht sails, sun protection and textile structures.
Solbond 10 Solbond 20 Solbond 30 Solbond 40
Bobbin size 1000 m 1.500 m 2.500 m 3.000 m
Application 9.5 oz-16 oz 7.0 oz- 10 oz 4.0 oz - 8.0 oz 0.75 oz - 4.0 oz
Needle sizeNM 160- 200
23 – 25NM 120- 160
19 – 23NM 110 – 130
18 – 21NM 90 – 110
14 – 18
Technology
Ticket / dtex No. 10 No. 20 No. 30 No. 40
dtex 2480 dtex 1500 dtex 1000 dtex 750
Strength 13.1 kg 9.0 kg 5.6 kg 4.6 kg
elongation 20% (17%-23%) 16 % (13 % – 19 %) 14 % (11 % – 22 %) 14 % (11 % – 22 %)
Chemical properties
Wash fastness (ISO 105 C03) – Note 4 - 5
Water fastness (ISO 105 E01) – Note 4 and better
Rub fastness (ISO 105 X12) – Note 4 and better
Colour retention (ISO 105 B02) – Note 4 and better
≥ Prices Contender Solbond
Part no. Type spool length m
SOL10…. Solbond No. 10 1000
SOL20…. Solbond No. 20 1500
SOL30…. Solbond No. 30 2500
SOL40…. Solbond No. 40 3000
Available colors
Natural0111
Tanbark9386
Red9514
Blue9515
Grey9356
Black9527
58
Phone: (+31) 297 237575 • [email protected]
Seaming & Sewing
≥ Contender MARA 30 WA - 100% polyester sewing thread with Micro Core Technology
MARA WA is produced by the German company Zwicky, member of the Gütermann group, who are recognised as the leading producer of industrial sewing thread. MARA WA has been developed for marine and outdoor applications looking for excellent sewability, abrasion resistance and breaking strength as well as UV and water resistance. Due to the combination of Micro Core Technology and the special water-repellent finish MARA WA offers the best solution for seams requiring water tightness.
Application area All marine applications including Biminis and canopies.
Outdoor applications such as awnings, shade sails and structures made with fabric
Bobbin size 3.000 m
Colours black, grey, captain navy blue, natural, beige
Needle size NM 110 – 130 / 18 – 21
Technology
Ticket No./ dtex No./Tkt. 30 – dtex 1000
Strength >3.500 cN
elongation Ø19%(17%-21%)
Chemical properties
Wash fastness (ISO 105 C03) – Note 4 - 5
Water fastness (ISO 105 E01) – Note 4 and better
Rub fastness (ISO 105 X12) – Note 4 and better
Colour retention (ISO 105 B02) – Note 4 and better
≥ Contender Mara 30 WA
Part no. Artikel spool length m
MAR30…. Mara WA No. 30 3000
Available colors
Natural0111
Burgundy0369
Charcoal0035
Beige0186
Black0000
Navy Blue6712
Graphite5102
Silver5618
59
Hardware Catalogue 2015 • Contender Sailcloth
Seaming & Sewing
≥ GORE™ TENARA® Sewing Thread TR STYLE - Clear
LTR and KTR are mono filament, HKTR is double mono filament
Part no. Linear Density (dtex)
App.Polyester Equivelant (Nm)
Nominal Break Strenght (kg)
Length (m/spool)
Recommended Needle Size (Nm)
Silikon Wax Lubricant
M1000LTR-L-5 1111 50/V46 3,2 2100 90-110 yes
M1000KTR-L5 1556 35/V69 4,5 1750 100-120 yes
M1000HKTR-L5 3111 20/V138 8,5 875 120-140 yes
To order coloured GORE™ TENARA® Sewing Thread in the thickness M1000TR-XX-5, add colour code for “XX”: WH (White), CB (Chesapeake Blue), RD (Red), GY (Grey), LG (light Grey), TN (TAN), BK (Black)
≥ Contender PTFE 30
100% polytetrafluorethylene. By Zwicky specially developed sewing thread for applications where UV-, chemical- and temperature resistance are a nessecety. Contender PTFE also has high breaking strength and abrasive resistance.
Application area Marine covers, filter materials
Outdoor applications such as awnings, shade sails and structures made with fabric
Bobbin size 4.200 m
Colours white, navy, silver, red, black
Needle size NM 90 - 110 / 14 - 18
Technology
Ticket No./ dtex No./Tkt. 30 – dtex 1300
Strength >3.000 cN
elongation Ø 3.5% (3%-4%)
≥ Contender PTFE 30
Part no. Artikel spool length m
PTFE… PTFE No. 30 4200
Available colors
White Chesapeake Blue TANRed BlackLight Grey
Silver0038
Available colors
Natural0111
Red0365
Blue0310
Black1274
60
Phone: (+31) 297 237575 • [email protected]
Seaming & Sewing
≥ Scissors
Medium scissors for use on any kind of cloth, with polished blades. The RQ1026 is especially designed for cutting Carbon, Kevlar and Dyneema materials. The blades are made of high Carbon Molybdenum Vanadium stainless steel for extra long edge life. Ergonomic styled and padded grip made of soft plastic.
Part no. Length mm
RQ102004 262 Right Normal use 56-58 HRC
RQ104004 262 Left Normal use 56-58 HRC
RQ1026 240 Right Aramid
≥ Hot Knife
Part no. Description
EW0 60 watt - 230 volt with EURO-plug, without blades
Accessories
EW1 Blade for cloth
EW2 Blade for rope
EW10 Special foot for EW 2
≥ Wheel Cutter and Cutting Pads
Wheel cutter for leather, cloth, paper, fiberglass or carbon fabric. With durable handle circular blade made of tungsten steel. Special cutting pad for wheel cutters, made of firm plastic material. Useable on both sides: soft enough to protect the blade and hard enough to prevent deep incisions.
Part no. Description
RQ1150028 Wheel Cutter, Ø 28 mm
RQ1150045 Wheel Cutter, Ø 45 mm
RQ1150128 2 Replacement Cutting Wheels, Ø 28 mm, tungsten
RQ1150045 1 Replacement Cutting Wheels, Ø 45 mm, tungsten
RQ1150063 60 x 90 cm, Cutting Pad
RQ1150064 60 x 143 cm, Cutting Pad
RQ1150065 100 x 200 cm, Cutting Pad
≥ Thread Clips
Stainless steel blades, plastic handles
Part no. Description
RQ203761 Thread Clip curved
RQ203861 Thread Clip straight
RQ1558 Seam Ripper
RQ102004 and RQ104004
RQ1026
curved
seam ripper
straight
Thread clip
ew2 ew1
61
Hardware Catalogue 2015 • Contender Sailcloth
Seaming & Sewing
≥ Scratch Awl
Top quality with yellow plastic handle
Part no. Length mm Packed Qty
HB1571 110 12
≥ Palms
Part no. Description
WS8051 Palm no. 2 1/2 Right
WS8052 Palm no. 2 1/2 Left
WS8151 Palm Right Hand “Professional Seaming”
WS8152 Palm Left Hand “Professional Seaming”
≥ Acrylic Seaming Tape
Non yellowing pure acrylic double sided tape with anti fungicide. A top quality seaming tape, for any kind of material.
Part no. Width mm Roll Length m
AD9006 6 50
AD9009 9 50
AD9012 12 50
AD9015 15 50
AD9020 20 50
AD9100 1000 10
≥ Venture Super Tack Seaming Tape
Non yellowing high perfomance acrylic double sided tape on a polyester carrier film for excellent adhesion on sailcloth, acryl and WeatherMax!
Part no. Width mm Roll length
ADVT06 6 50
ADVT09 9 50
ADVT12 12 50
ADVT15 15 50
ADVT19 19 50
ADVT25 25 50
≥ Push Pins
Stainless steel pins with plastic or aluminium head
Part no. Length Packed Qty
HB1570 28 mm with red plastic head 100
HB1572 28 mm with aluminium head 100
62
Phone: (+31) 297 237575 • [email protected]
Seaming & Sewing
≥ Hand Sewing Thread
White, prewaxed. A spool is approximately 16 oz / lbs
Part no. Type Length per spool
HB81346 V346 960 m
HB81462 V462 715 m
≥ Sail Repair Sets
Part no. Type
WS5201 SRS type 1
WS5202 SRS type 2
≥ Sailmaking Needles
WILLIAM SMITH & SON® Tri-angular, packed quantity 25
Part no. Length mm Ø mm
WS5109 No. 9 102 mm 3.5
WS5110 No. 10 89 mm 3.0
WS5112 No. 12 81 mm 2.6
WS5113 No. 13 79 mm 2.3
WS5114 No. 14 76 mm 2.0
WS5115 No. 15 72 mm 1.9
WS5116 No. 16 69 mm 1.6
WS5117 No. 17 65 mm 1.4
WS5118 No. 18 62 mm 1.2
WS5119 No. 19 49 mm 1.0
WS5120 Envelope with 5 assorted needles (No. 13,15,16,17,18)
WS5121 Tube with 20 assorted needles (4 each No. 14 - 18) + 2 sewing needles
WS 5201 WS 5202
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
AdhesivesPolyester Insignia • Sailnumbers • Insignia TapesAdhesive Foam • Spinnaker Repair Tape
65
Hardware Catalogue 2015 • Contender Sailcloth
Adhesives
≥ Polyester Insignia
Adhesive backed polyester cloth, width 137 cm. Full rolls only, 10 and 50 yards.
Part no. Colour
CM10 White
CM20 Dark Blue
CM60 Red
CM90 Black
CM93 Light Grey
UV coated, also for printing
IN00UV White
≥ Sailnumbers
Packed quantity 10
Part no. Size Colour
CTZ02* 250 mm Blue
CTZ06* 250 mm Red
CTZ09* 250 mm Black
CTZ22* 300 mm Blue
CTZ26* 300 mm Red
CTZ29* 300 mm Black
CTZ52* 380 mm Blue
CTZ56* 380 mm Black
CTZ59* 380 mm Red
*please fill after the part no. the letter or number of choice.
≥ Digital Sailnumbers
Packed quantity 10
Part no. Size Colour
CTC228 300 mm Blue
CTC268 300 mm Red
CTC298 300 mm Black
NED
66
Phone: (+31) 297 237575 • [email protected]
Adhesives
≥ Adhesive White Foam, 5 mm thick
Part no. Width Roll length
FOAM -40MM 40 mm 25 m
FOAM -50MM 50 mm 25 m
FOAM 100 cm 50 m
≥ Mylar Repair Tape
Mylar 0.75 mm with adhesive, 50 m rolls
Part no. Width
APSA1 25 mm
APSA2 50 mm
APSA4 100 mm
≥ Spinnaker Repair Tape
Nylon Insignia on rolls of 4.5 m in 50 mm width
Part no. Colour
PSA500411 White
PSA500421 Light Blue
PSA500422 Dark Blue
PSA500429 Pink
PSA500430 Green
PSA500441 Yellow
PSA500443 Fluor Yellow
PSA500450 Orange
PSA500460 Red
PSA500490 Black
PSA500491 Grey
≥ Insignia Tapes
Part no. Length Width Colour
HB1922 45 m 20 mm Blue
HB1926 45 m 20 mm Red
HB1929 45 m 20 mm Black
HB1D 45 m 25 mm (1”) White
HB2D 45 m 50 mm (2”) White
HB3D 45 m 76 mm (3”) White
HB4D 45 m 102 mm (4”) White
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Tapes & Luff TapesWelded Luff Tapes • Seamed Luff Tapes • Bolt RopesLuff Lines • Tape Folders • Polyester Tapes • Nylon Tapes
69
Hardware Catalogue 2015 • Contender Sailcloth
Tapes & Lufftapes
≥ Contender PVC coated Luff Tape with hard braided Luff Line
The base for the luff tape is a 500 x 500 denier polyester cloth which is coated with PVC on the inside to weld the tape firmly around a hard braided Gleistein luff line. The outside of the tape is impregnated with a special formula to prevent it from getting mildew and ensure the tape to slide easily through the head stay profile.
Part no. Diameter tape mm Distance to 2nd cord mm
CL4.0 4 -
CL4.5 4.5 -
CL5.0 5 -
CL5.5 5.5 -
CL6.0 6 -
CL7.0 7 -
CL4.0-2 4 13
CL4.5-2 4.5 13
CL5.0-2 5 13
CL5.5-2 5.5 13
CL6.0-2 6 13
A cut fee will be charged for a cut length.
≥ Traditional Seamed Luff Tape
The base of the luff tape is 7 oz polyester cloth, traditionally sewn around a braided line
Part no. Diameter luffline mm Distance to 2nd cord mm
KL201 3 -
KL205 4 -
KL206 4.5 -
KL209 5 -
KL207 6 -
KL219 6 -
KL220 8 -
KL217 4.5 10
KL208 5 10
KL213 6 10
KL212 3 25
KL202 4 25
KL210 4.5 25
KL203 5 25
KL214 6.5 25
A cut fee will be charged for a cut length.
70
Phone: (+31) 297 237575 • [email protected]
Tapes & Lufftapes
≥ Bolt Rope
Bolt rope in Polyester for stretchy luff. 3-strand. Sold per reel.
Part no. Diameter mm Reel length m
RS0124006 6 200
RS0124007 7 200
RS0124008 8 200
RS0124009 9 200
RS0124010 10 200
≥ Teflon Tape
Special tape for use on forestay systems, extremely low friction
Part no. Weight Width mm Colour
Teflon 8 oz - 340 g/m2 125 White
≥ Tape Folder
Part no. Description
1650 folds your tape, in a quick and easy way accurately
≥ Luffline
Prestretched Polyester, low elongation. 16 plait cover with fibre inlay. Sold per reel.
Part no. Diameter Reel length m
GR423011 3.0 250
GR423511 3.5 250
GR424011 4.0 250
GR424511 4.5 250
GR425011 5.0 250
GR426011 6.0 250
GR428011 8.0 250
User guide:– Loosen the two wing nuts (A). Push the two stainless steel
plates outwards as shown.– Fold and crease half a metre of the tape (D), exactly in the
middle, that you want to fold.– Insert the folded and creased tape into either the top or lower
slot.Use the narrow slot for tapes lighter than 280 grams/sqm, and the wider slot for tapes heavier than 280 grams/sqm. The fold should point towards the stainless plate. If necessary you can use slot E to feed the tape through the folder.
– Push the two stainless steel plates inwards untill the crease of the folded tape has been reached. Then tighten the two wing nuts A.
– Pull the tape through the tape holder.– The tape folder can be placed in a vice or bolted to a bench
(using holes F), for added stability, when pulling the tape.
71
Hardware Catalogue 2015 • Contender Sailcloth
Tapes & Lufftapes
≥ Polyester Tapes, natural
Sold per roll
Part no. Weight Width mm
TAP40025 4 oz - 170 g/m2 25
TAP40030 4 oz - 170 g/m2 30
TAP40040 4 oz - 170 g/m2 40
TAP40050 4 oz - 170 g/m2 50
TAP40060 4 oz - 170 g/m2 60
TAP50050 5 oz - 210 g/m2 50
TAP50060 5 oz - 210 g/m2 60
TAP50070 5 oz - 210 g/m2 70
TAP50080 5 oz - 210 g/m2 80
TAP50090 5 oz - 210 g/m2 90
TAP50100 5 oz - 210 g/m2 100
TAP60050 6 oz - 255 g/m2 50
TAP60060 6 oz - 255 g/m2 60
TAP60070 6 oz - 255 g/m2 70
TAP60080 6 oz - 255 g/m2 80
TAP60090 6 oz - 255 g/m2 90
TAP60100 6 oz - 255 g/m2 100
TAP60125 6 oz - 255 g/m2 125
TAP70070 7 oz - 300 g/m2 70
TAP70080 7 oz - 300 g/m2 80
TAP70090 7 oz - 300 g/m2 90
TAP70100 7 oz - 300 g/m2 100
TAP70125 7 oz - 300 g/m2 125
TAP70150 7 oz - 300 g/m2 150
≥ Fibercon® Tapes, natural
Sold per roll
Part no. Weight Width mm
TAP638060 6.38 oz – 255 g/m2 60
TAP638070 6.38 oz – 255 g/m2 70
TAP638080 6.38 oz – 255 g/m2 80
TAP638090 6.38 oz – 255 g/m2 90
TAP638100 6.38 oz – 255 g/m2 100
TAP738070 7.38 oz - 300 g/m2 70
TAP738080 7.38 oz - 300 g/m2 80
TAP738090 7.38 oz - 300 g/m2 90
TAP738100 7.38 oz - 300 g/m2 100
TAP738125 7.38 oz - 300 g/m2 125
72
Phone: (+31) 297 237575 • [email protected]
Tapes & Lufftapes
≥ Polyester Tapes, coloured
Sold per roll
Part no. Weight Width mm Colour
TAP40730 4 oz - 170 g/m2 30 Red
TAP40750 4 oz - 170 g/m2 50 Red
TAP44930 4 oz - 170 g/m2 30 Green
TAP44950 4 oz - 170 g/m2 50 Green
TAP46630 4 oz - 170 g/m2 30 Dark Blue
TAP46650 4 oz - 170 g/m2 50 Dark Blue
TAP699050 6 oz - 255 g/m2 50 Black
TAP699060 6 oz - 255 g/m2 60 Black
TAP699070 6 oz - 255 g/m2 70 Black
TAP699080 6 oz - 255 g/m2 80 Black
TAP699090 6 oz - 255 g/m2 90 Black
TAP699100 6 oz - 255 g/m2 100 Black
≥ Nylon 1.5 oz Tapes, coloured
Sold per roll
Part no. Width mm Colour
TAP150030 30 Natural
TAP150050 50 Natural
TAP151330 30 Red
TAP151350 50 Red
TAP154930 30 Green
TAP154950 50 Green
NEW
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
ComponentsBattenpockets • Sail Reinforcements
75
Hardware Catalogue 2015 • Contender Sailcloth
Components
≥ Leech Batten Pocket 75 mm tape
Fits OR1/OR2/OR3
Part no. Length mm
XBPL09001 900
XBPL10501 1050
XBPL12501 1250
XBPL15001 1500
XBPL18001 1800
XBPL21001 2100
≥ Contender Batten Pockets
Ready to be stitched on to the sail. Complete with Velcro closing. The leech pockets come with finished front end, while the full batten pockets come with an open front end. Packed quantity is 10 pcs.
≥ Leech Batten Pocket 100 mm tape
Fits OR4/OR5
Part no. Length mm
XBPL15004 1500
XBPL18004 1800
XBPL21004 2100
≥ Full Batten Pocket 75 mm tape
Fits OR1/OR2/OR3
Part no. Length mm
XBPF10002A 1000
XBPF12002A 1200
XBPF15002A 1500
XBPF18002A 1800
XBPF24002A 2400
XBPF30002A 3000
≥ Full Batten Pocket 100 mm tape
Fits OR4/OR5
Part no. Length mm
XBPF30003A 3000
XBPF36003A 3600
XBPF42003A 4200
XBPF50003A 5000
XBPF60003A 6000
Batten Pocket
Velcro Insert
76
Phone: (+31) 297 237575 • [email protected]
Components
≥ Clew/Tack Patches
Part no. Weight Edge Length mm Packed Qty.
A B
XCLEW641 6.4 400 280 10
XCLEW642 6.4 700 490 10
XCLEW743 7.4 1000 700 10
XCLEW744 7.4 1300 910 10
XCLEW745 7.4 1600 1120 10
≥ Main Head Patches
Part no. Weight Edge Length mm Packed Qty.
A B C
XHEADM641 6.4 120 500 375 10
XHEADM742 7.4 170 1000 750 10
XHEADM743 7.4 220 1500 1125 10
≥ Genoa Head Patches
Part no. Weight Edge Length mm Packed Qty.
A B C
XHEADJ641 6.4 40 600 260 10
XHEADJ742 7.4 60 900 400 10
XHEADJ743 7.4 80 1200 540 10
A
B
C
Genoa Head Patch
A
B
C
Mainsail Head Patch
A
BClew/Tack Patch
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
FabricsSail Bag Fabric • Trampoline Mesh • Window MaterialWeatherMax™ • Masacril® • Clear PVC Film
≥ WeatherMax™
Contender is distributing the WeatherMax™ cover and awning material – a fabric that combines breakthrough UV technology with water resistance and durability. WeatherMax™ is the perfect balance of science, toughness and style.
The WeatherMax™ fabric has taken away the need to make a choice between a waterproof and a breathable fabric by offering a solution to both. WeatherMax™ has a HydroMax finish which ensures there is no need for extra coatings. This makes WeatherMax™ lightweight, water resistant, non sagging and durable. The HydroMax finish also provides excellent breathability to help reduce condensation and mildew.
WeatherMax™ is woven using SaturaMax yarn. SaturaMax yarn technology gives this fabric the same long term colour retention associated with acrylic materials, but with the significant advantage of higher strength, stability and abrasion resistance.
WeatherMax™ is available in two weights and a wide range of colours to suit all applications.
WeatherMax™ is an ideal solution for covers, awnings, UV strips, upholstery, cushions, umbrellas and sun shades.
≥ WeatherMax™ 80 Coated
WeatherMax™ Coated an excellent alternative for Acrylics. With the special coating WeatherMax™ is now waterproof with a water column of 1000mm.
WeatherMax™ Coated quite simply outperforms the competition. It has twice the strength of acrylic and is six times more durable under abrasion and rubbing. WeatherMax Coated has a long life, very good UV properties, fade resistance and an antimildew treatment.
≥ WeatherMax™ bias binding
This new bias binding utilizes the unique qualities of the WeatherMax™ 80 to produce the best bias binding available. It is 44mm wide bias WeatherMax™ 80 folded and fused to 22mm 7/8" finished width. Its fantastic abrasion resistance and superb colour retention make this bias binding suitable for all applications and will out perform all others. Available in various colours a Suisei binder is available for ease of production and a truly professional finish.
79
Hardware Catalogue 2015 • Contender Sailcloth
Fabrics
Performance Properties WeatherMax™ 80 WeatherMax™ Coated
WeatherMax™ 65 WeatherMax™ FR
Weight (g/m2) 271 298 220 305
Width - Fused Edge (mm) 152 150 152 152
Put Up (m) 69 50 91 59
Tensile Strength - ASTM D5034 (warp x fill/lbs) 490 x 390 180x175 DaN 430 x 270 460 x 360
Mullen Burst - ASTM D3884 (psi) 393 .. 292 420
Tongue Tear - ASTM D2261 (warp x fill/lbs) 20 x 18 45x45 N 15 x 10 13 x 15
Taber Abrasion - ASTM D3884 (cycles) 600 600 600 600
Hydrostatic Pressure - AATCC 22 (mm) 650 1300+ 550 900+
Spray Rating - AATCC 100 100 100 100
Air Permeability - ASTM D737 - cfm 1.3 0 1.5 0.2
UPF - Ultraviolet Protection Factor 50+ 50+ 50+ 50+
UVA & AVB - Ultraviolet Blockage Over 99% Over 99% Over 99% Over 99%
CLEANING INSTRUCTIONS
WeatherMax™ fabrics may be spot washed by using a soapy solution of a mild detergent and lukewarm water. Rinse thoroughly with clean water to remove the soap and allow to air dry. For mildew stains, prepare a solution of one (1) cup of bleach plus half (1/2) cup of mild detergent per 4 liters water. Spray on the entire area and allow soaking. Rinse with clean water and allow to air dry.
The printed colour may differ from the actual colour. Please only use for your reference.
Silver
80 29382
Light Charcoal
80 29334
Graphite
80 29431
Black
80 29355
Royal
80 29401
True Red
80 29344
Scarlet
80 29374
Burgundy
80 29338
Captain Navy
80 29354
Sand
80 29376
Taupe
80 29377
Forrest Green
80 29342
Moss
80 29403
White
80 29371
Oyster
80 29423
Yellow
80 29352
Beige
80 29389
Toast
80 29348
Chocolat
80 29430
Pacific Blue
80 29346
80
Phone: (+31) 297 237575 • [email protected]
Fabrics
≥ WeatherMax™ 80
Part no. Colour
WM80 29334 Light Charcoal
WM80 29338 Burgundy
WM80 29342 Forest Green
WM80 29344 True Red
WM80 29346 Pacific Blue
WM80 29348 Toast
WM80 29352 Yellow
WM80 29354 Captain Navy
WM80 29355 Black
WM80 29371 White
WM80 29374 Scarlet
WM80 29376 Sand
WM80 29377 Taupe
WM80 29382 Silver
WM80 29389 Beige
WM80 29396 Saphire tweed
WM80 29397 Forest tweed
WM80 29401 Royal Blue
WM80 29403 Moss
WM80 29423 Oyster
WM80 29430 Chocolate
WM80 29431 Graphite
≥ WeatherMax™ 80 Linen
Part. no. Colour
WM80 29427 Sandstone
WM80 29428 Slate
WM80 29440 Oyster Linen
WM80 29441 Black Linen
Black Linen
80 29441
Sandstone
80 29427
Slate
80 29428
Oyster Linen
80 29440
NEW
81
Hardware Catalogue 2015 • Contender Sailcloth
Fabrics
≥ WeatherMax™ 65
Part no. Colour
WM65 29333 Lt Charcoal
WM65 29335 Black
WM65 29341 Forest Green
WM65 29343 True Red
WM65 29345 Pacific Blue
WM65 29347 Toast
WM65 29350 Yellow
WM65 29353 Captain Navy
WM65 29372 White
WM65 29381 Sand
WM65 29399 Silver
WM65 29429 Chocolate
≥ WeatherMax™ 80 coated
Part no. Colour
WM80PU334 Light Charcoal
WM80PU354 Captain Navy
WM80PU355 Black
WM80PU371 White
WM80PU382 Silver
WM80PU401 Royal Blue
WM80PU431 Graphite
NEW
82
Phone: (+31) 297 237575 • [email protected]
Fabrics
≥ WeatherMax™ 65 - PSA backed - UV leech cover genoa
Part no. Colour
25 cm wide
WM65A00025 White 29371
WM65A66025 Pac.Blue 29345
WM65A77025 Capt.Navy 29353
WM65A93025 Silver 29399
WM65A94025 Lt.Charcoal 29334
50 cm wide
WM65A00050 White 29371
WM65A66050 Pac.Blue 29345
WM65A77050 Capt.Navy 29353
WM65A93050 Silver 29399
WM65A94050 Lt.Charcoal 29334
150 cm wide
WM65A00150 White 29371
WM65A66150 Pac.Blue 29345
WM65A77150 Capt.Navy 29353
WM65A93150 Silver 29399
WM65A94150 Lt.Charcoal 29334
≥ WeatherMax™ FR, Fire Retardant Fabric
Part no. Colour
WM80FR334 Light Charcoal
WM80FR355 Black
WM80FR338 Burgundy
WM80FR346 Pacific Blue
WM80FR371 White
≥ WeatherMax™ bias binding 22mm
on 25m rolls
Part no.
WM80BBXXX XXX is color
WM1650-1022 Suisei binder 22 mm
NEW
83
Hardware Catalogue 2015 • Contender Sailcloth
Fabrics
84
Phone: (+31) 297 237575 • [email protected]
Fabrics
≥ Performance Properties -Masacril®
Masacril® is a high quality range of acrylic fabrics that gives an excellent performance in many applications in the nautical sector. Its excellent properties: long life, great resistance to UV radiation, permeability to air and watertightness, anti-mould properties, light weight, ease of maintenance and solution dyed Masacril® acrylic, make it the fabric of choice. For over thirty years there has been no other fabric that can compare. The very durable waterproof coating ensures a water column of more than 1000 mm and excellent shape holding; still, there is enough stretch in the fabric so that a canopy can be pulled effortlessly to the attachments and has enough stability to prevent sagging.
Specifications: Acryl-coated
Material: 100% acrylic
Construction: warp 31 yarns/cm fill 15 yarns/cm
Tensile strength: warp 140 daN/5 cm fill 95 daN/5 cm
Weight: 330 gr/m2
Water column: 1000 mm
Finish: Teflon/fluor carbon
Width: 153 cm
Roll length: 50 meter
85
Hardware Catalogue 2015 • Contender Sailcloth
Fabrics
≥ Contender Masacril® - Coated Acrylic Fabric
Part no. Colour Colour code
MACTD2405 White/Blanco 2405
MACTD2411 Off White/Marfil 2411
MACTD2403 Beige 2403
MACTD2419 Red/Rojo 2419
MACTD2407 Dark Red/Granate 2407
MACTD2729 Red/Rioja 2729
MACTD8733 Teja 8733
MACTD2452 Vison 2452
MACTD8634 Yellow/Amarillo 8634
MACTD2410 Br Green/Tweed Verde 2410
MACTD2742 Light Green/Verde 2742
MACTD2488 Dark Green/Botella 2488
MACTD2401 Dark Blue/Azul 2401
MACTD2423 Medium Blue/Azul Reaal 2423
MACTD2413 Navy Blue/Marino 2413
MACTD2449 Admiral Navy 2449
MACTD2417 Light Grey/Perla 2417
MACTD2409 Silver 2409
MACTD2421 Grey/Gris 2421
MACTD2415 Brown/Marron 2415
MACTD2881 Black/Negro 2881
MACTD2453 Seda 2453
MACTD2443 Integral 2443
MACTD2451 Avena 2451
MACTD2719 Tweed Avena 2719
MACTD2718 Tweed Rojo 2718
MACTD2442 Cafe 2442
MACTD2710 Tweed Verde 2710
MACTD2418 Brisa 2418
MACTD2746 Indigo 2746
MACTD2660 Tweed Azul 2660
MACTD2743 Tweed Midnightblue 2743
MACTD2750 Mineral 2750
MACTD2461 Antracita 2461
MACTD2463 Tweed Negro 2463
86
Phone: (+31) 297 237575 • [email protected]
Fabrics
≥ Sauleda Nautic Masacril® Duo
Duo combines two excellent materials, resulting in a durable technical fabric. On one side Masacril and on the other side a leather-like PVC coating. Duo has a long life, great resistance to UV, solid colors and total water tightness. Duo removes condensation and includes a specific anti mould treatment for marine environment.
Part no. Acryl PVC
MADUO3420 Blanco Blanco
MADUO3421 Botella Marfil
MADUO3422 Negro Marfil
MADUO3423 Granate Granate
MADUO3424 Azul real Grey
MADUO3425 Avena Avena
MADUO3426 Silver Grey
MADUO3427 Marino Marino
MADUO3428 Marino Marfil
MADUO3429 Admiral Grey
Technical Characteristics
Fabric Masacril® Acrylic solution dyed
Coating PVC 1 face
Weight 520 gr / m2
Finish Sauleda Fabric Protector
Thickness 0.6 mm
Tensile StrengthWarp 150 daN / 5cm
Weft 90 daN / 5cm
Length of rolls 50 m
Width 204 cm / 80”
≥ Masacril® bias binding 20mm
on 50 m rolls
Part no.
HMABBXXXX XXX is color
NEW
FABRIC PROTECTOR
Masacril
Ad
mira
l
MADUO3426
PVC
Silver
87
Hardware Catalogue 2015 • Contender Sailcloth
Fabrics
≥ Sauleda Nautic Fleet and Port
Sauleda is producing PVC coated fabrics specially developed for the marine environment. There is a 300 gr/m2 Fleet and a 400 gr/m2 Port. Fleet and Port have a leather-like finish on one side. Port is coated on two sides, Fleet only on one side. Both Port and Fleet have a long life, great resistance to UV, solid colours and total water tightness. Both are anti mould treated.
Fleet Colour Port
MAFLT32010 32010 White/Blanco 6931 MAPOR6931
MAFLT32011 32011 Ivory/Hueso 6920 MAPOR6920
MAFLT32013 32013 Off White/Marfil 6921 MAPOR6921
MAFLT32014 32014 Dark Beige/Avena 6922 MAPOR6922
Orange/Naranja 6927 MAPOR6927
Dark Red/Granate 6929 MAPOR6929
Dark Green/Botella 6925 MAPOR6925
MAFLT32022 32022 Medium Blue/Azul Real 6926 MAPOR6926
MAFLT32024 32024 Navy Blue/Marino 6924 MAPOR6924
MAFLT32093 32093 Silver 6923 MAPOR6923
Grey/Gris 6928 MAPOR6928
Black/Negro 6930 MAPOR6930
Technical Characteristics
Fleet Port
Fabric Poly 280 dtex Poly 280 dtex
Coating PVC one sided PVC two sided
weight (gr/m2) 300 400
thickness 25 35
tear strength warp x fill 6 daN x 4 daN 13 daN x 10 daN
temperature -30 tm +70 -30 tm +70
roll length 50 50
width (cm) 210 220
88
Phone: (+31) 297 237575 • [email protected]
Fabrics
≥ Trampoline Fabric
Weight 290 gr/m2, width 190 cm, roll length 100m, (also sold by metre, a cutting fee will be charged)
Part no. Colour
TRAMPO G Grey
TRAMPO B Black
≥ Clear PVC Film with UV Protection - Top Japanese Quality
Only full rolls, width 137 cm
Part no. Roll length Thickness mm
FF040 25 0,40
FF050 25 0,50
FF075 30 0,75
FF100 30 1,00
≥ Clear Mylar Film
MonoFilm Only full 25 m rolls, AX sold by metre
Part no. description width cm
PSG100125C Monofilm 5.0 mil 150
PSG100175C Monofilm 7.0 mil 150
PSG100250C Monofilm 10.0 mil 150
AX 40 Film with X-ply 4.0 mil 137
≥ Nylon Sailbag Fabric
Quality Nylon fabric with good tensile strength, light permeable PU-finish on one side (sewing finish), not waterproof, 420 den x 420 den, ca. 180 g/m2, width 150 cm, roll length 100 m (also sold by metre, a cutting fee will be charged!)
Part no. Colour
KZ10 White
KZ13 Red
KZ28 Gold
KZ29 Yellow
KZ49 Green
KZ66 Dark Blue
KZ69 Medium Blue
KZ77 Navy Blue
KZ95 Dark Grey
KZ94 Grey
KZ99 Black
Coloured woven cloth can stain under certain circumstances! Please make sure that sails in their sailbag are not stored for longer periods under damp conditions.
ww
w.c
on
ten
de
rsa
ilclo
th.c
om
Terms of TradingContender Sailcloth
91
Hardware Catalogue 2015 • Contender Sailcloth
Terms of Trading
StatusThese terms of trading are a summary of the terms registered at the Chamber of Commerce in Utrecht, the Netherlands, under number 2405. No modification, alteration or amendment of any of the provisions of these terms of trading shall be valid unless in writing and signed by Contender B.V.
PricesAll quoted prices are net FOB from our warehouses in The Netherlands, and/or K.B.C. Germany and are exclusive of VAT. All prices are subject to change without notice.
PaymentInvoices are dated as per the day of despatch of the goods. We retain ownership of the goods supplied until full payment has been received in accordance with the set payment terms.
Overdue AccountsDespatch of new orders may be withheld where accounts are overdue. Interest may be applied to overdue accounts on a monthly basis from the due date until the date of receipt of payment. The interest rate is 1½% per month. Any portion of a month shall count as a full month.
Method of DeliveryThe customer should specify whether “regular” or “express” delivery service is required. If neither is specified we will assume that regular service applies.
Where regular delivery is specified, despatch will be made by post provided weight and size permitting, or alternatively by normal road or air carrier.
ReturnsGoods may be returned by prior arrangement. Any goods returned for credit must be delivered to our warehouse within 60 days of invoice date.
LiabilityAll materials sold by Contender have been specifically developed for the manufacturing of sails and/or other marine associated applications. Contender can not be held liable if their products are used otherwise.
Product liability is restricted to the value of the specific item delivered by Contender.
All further liabilities are excluded.
Contender B.V.
Nijverheidsweg 17a3641 RP Mijdrecht
PO Box 2093640 AE MijdrechtThe Netherlands
Phone : (+31) 297 237575Fax : (+31) 297 281670