Intelligent Testing

PB

303

2.0

218

Hardness Testing with Zwick Roell

1 Welcome to Zwick Roell – passionate customer orientation

For over 160 years the name of Zwick Roell has stood for outstanding technical competence, innovation, quali-ty and reliability in materials and component testing. Our customers’ confidence in us is reflected in our position as world-leaders in static testing and the significant growth we are experiencing in fatigue strength tes-ting systems. With innovative product development, a comprehensive range and worldwide service, this family concern supplies tailor-made solutions for the most demanding requirements – in both research and development and quality assurance in over 20 sectors. With more than 1250 employees, a production facility in Ulm, Germany, additional facilities in Europe, USA and Asia plus agencies in 56 countries worldwide, the Zwick brand name guarantees the highest product and service quality.

Customer orientation is the basis of our corporate philosophy. Dependability, straightforwardness and professionalism are the keynotes of our approach. Our aim is to build long-term customer relationships based on mutual trust – we value every customer, from large undertakings to small firms. We always give of our best.

We help our customers to achieve greater success through expert advice, tailer-made solutions, innovative products and comprehensive services.

Zwick Roell’s comprehensive and innovative hardness testing solutions

The success of our hardness testing machines and instruments is founded on many years‘ experience, on our role as a global supplier and on maintaining close contact with our customers. The versatility and high level of ‘intelligence’ of our testing systems are the product of uptodate engineering, powerful electronics and applicationorientated software.

The Zwick Roell Group has UKAS and DAkkS-accredi-ted ISO 17025 hardness calibration laboratories, trace-able to National Metrology Institutes. This guarantees Zwick Roell hardness testers, test blocks and indenters are supplied with traceable certification.

Fig. 1: Innovation center of the Zwick Roell AG and the Zwick GmbH & Co. KG in Ulm, Germany

2

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Hardness Testing Methods

Static load applicationAn indentor with a hard metal ball or a diamond cone/pyramid is pressed into a specimen supported on a firm base. The test load is applied per-pendicularly, without shock, and with a defined initial application time and duration.

Dynamic load applicationLarge components often require portable devices which normally use dynamic force application.

Optical indentationmeasurement

The indentation is measured after removal of the test load. The length measurement values (indentation diagonal, diameter) are used to calculate the hardness value.

Depth measurementmethod

The indentation depth is measu-red under test load or after remo-val of additional test load.

Energy measurement

Impact velocity and rebound velo-city (or height) of impact bodyare measured.

• Vickers HV • Brinell HBW • Knoop HK

• Leeb HL • Rebound hardness (e.g. Sclero-graph)

Measurement under constant test load Measurement under pre-load afterremoval of the additional load

• Instrumented indentation test

• Martens HM • Ball indentation hardness • Modified method to Vickers HVT

• Rockwell (A, B, C, D, E, F, G, H, K, N, T, W, X, Y)

• Rockwell (R, L, M, E, K, alpha)

• Modified method to Brinell HBT

Initialposition

Measurementposition

hv

Refe

rence leve

l

hr

F

d1d2

Measurementposition

Loadingposition

Initialposition

Loadingposition

Measurementposition

hRefe

rence leve

l F0 Fm F0F

Loadingposition

F = 0

hRefe

rence leve

l

Measurementposition

3

2 Universal Hardness Testers

ZHU250CL Universal Hardness Tester

Combination of the best

Today’s modern allpurpose hardness testing machines are based on technologies making innovative use of mechatronic components. Their high level of precision gives them a wide range of applications, particularly in quality assurance, productionline checks and in the laboratory environment.

In the ZHU250CL hardness tester the latest close loop technology is used for applying test forces . The closed loop control system is designed to have a much lower signal-to-noise ratio than a traditional load cell, thus providing much greater consistency of test force application. The accuracy on all loads beats the re-quirements according to the relevant ISO and ASTM standards.

The extremely wide test force range of 4.9 N to 2.45 kN (0.5 kg to 250 kg) enables testing according to Vickers, Knoop, Rockwell and Brinell to ISO 6507, ISO 4545, ISO 6508, ISO 6506 and the relevant ASTM standards.

The unique “4-plus-4” turret is able to carry up to 4lenses and up to 4 indenters simultaneously. Theturret is also designed to allow testing in hard toreach positions by using a unique vertical rotationmechanism with an adjustable approach velocity. The dwell time is variable from 5 - 60 seconds. A high-resolution 4 megapixel USB camera is integrated in the hardness tester.

Operation and control of the hardness tester results from the High Definition software (ZHμ.HD). Motorized x-y tables are available for automated hardness traver-se tests. With the USB camera and an objective lens a high-resolution overview image of specimen surface can be created via scan function. Automatic indentation measurement - with illumination and shadow correction - removes operator influence in determining hardness values (see further features of High Definition software on page 16).

Fig. 1: ZHU250CL universal hardness tester Fig. 2: ZHU250CL universal hardness tester in zoom

4

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Fig. 1: ZHU250 universal hardness tester

ZHU250 Universal Tester

Robust Know-How The ZHU250 universal hardness tester is used for the following methods:• Vickers (HV) ISO 6507, ASTM E 384• Knoop (HK) ISO 4545, ASTM E 384• Brinell (HBW) ISO 6506, ASTM E 10• Rockwell (HR) ISO 6508, ASTM E 18• Vickers depth measurement HVT VDI/VDE 26161• Brinell depth measurement HBT VDI/VDE 26161• Ball indentation hardness (H) (ISO 20391) (plastics)

The ZHU250’s robust design guarantees many years of testing in a wide range of applications requiring a test load up to 2.5 kN (250 kgf). It features fast, easy hand-ling.

Optical measuring of indentations uses a digital precision measuring system on a highly tempered, nonreflective focusing screen. A comprehensive range of lenses (magnifications from 15x to 520x) and acces-sories is available to suit any testing situation.

ZHU187.5 Universal Tester

Flexibility for Everyone

The ZHU187.5 is available in versions to suit test loads between 29.4 N and 1839 N (187.5 kgf) for the follow-ing methods:• Vickers hardness (macro)• Brinell hardness (up to 1839 N)• Rockwell hardness (classic method)

Features of these instruments include dead weight friction free loading, an automatic test cycle and a nose-mounted indenter providing highly flexible test positions. Loadchange is by means of sidemounted rotary kn-obs; the test method is selected via an LCD line display. The microscope has adjustable graticules to optically measure the indentation. The hardness value appears automatically on the display and can be transmitted to the testXpert III software at the touch of a button. Stati-stical evaluations and conversions can be performed in addition to entering tolerance limits.

An RS-232 interface plus a wide range of accessories (indenters, support tables, hardness test blocks) are included as standard.

Fig. 2: The ZHU187.5 universal hardness tester

5

Fig. 1: ZHVμ Vickers hardness testers with new design and HD software

3 Vickers Hardness Testers

ZHVµ / ZHV30 Vickers Tester

Variety to suit

The ZHVµ Micro Vickers hardness tester covers Vi-ckers and Knoop hardness tests to ISO 6507, ISO 4545 and ASTM E 384 within the load range from HV0.01 to HV2.

The hardness tester is equipped with an automatic 6-position turret for up to 2 indenters and up to 4 len-ses. This enables Vickers and Knoop hardness tests by menu selection without exchanging the indenter. A wide practical application range is ensured with objective lenses covering total magnifications from 25x to 1000x. The front panel display and integrated microscope allow easy operation and timesaving hardness testing. The test cycle is fully automatic and dwell time can be set in the hardness tester electronics. Load change is also au-tomatic and set in the menu. The intensity of the illumi-nation can be stored for each objective lens individually.

For more sophisticated or automated applications, PC controlled versions are available as semi or fully automatic systems based on the High Definition Soft-ware (ZHμ.HD). The advantage of this software is that it creates an overview image of the specimen in high resolution to define indentation positions. This allows single or multiple traverses to be configured and carried out accurately on the specimen surface. The customer benefits from the linking of the overview picture and the live image. The indentation is shown on the live image with the measurement lens magnification and the soft-ware indicates automatically where this position is in the overview image of the specimen surface.

The system is operated and controlled entirely by the software and is particularly used for automated multiple traverse testing.

6

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Fig. 1: ZHV30 Vickers hardness tester with manual x-y table Fig. 2: ZHV30 semi automatic Vickers hardness tester with HD software

The ZHV30 micro/macro Vickers hardness tes-ter covers Vickers and Knoop hardness tests to ISO 6507, ISO 4545 and ASTM E 384 within the load range from HV0.2 to HV30.

The hardness tester is equipped with an automatic 5-position turret for 1 indenter and up to 4 lenses. A wide practical application range is ensured with diffe-rent objective lenses covering magnifications from 25x to 500x. The front panel display and integrated micro-scope allow easy operation and timesaving hardness testing. The test cycle is fully automatic and dwell time can be set in the hardness tester electronics. Load change is also automatic and set in the menu. The intensity of the illumination and individual adjustment is stored for each lens individually.

For more sophisticated or automated applications, PC controlled versions are available as semi or fully automatic systems based on the High Definition Soft-ware (ZHμ.HD). The advantage of this software is that it creates an overview image of the specimen in high

resolution to define indentation positions. This allows single or multiple traverses to be configured and carried out accurately on the specimen surface. The customer benefits from the linking of the overview picture and the live image. The indentation is shown on the live image with the measurement lens magnification and the soft-ware indicates automatically where this position is in the overview image of the specimen surface.

The system of this hardness tester is operated and con-trolled entirely by the software. The system is especially used for automated traverse testing.

ZHμ.HD software can export hardness test results in three formats: MS Excel for powerful statistical analysis, reporting and 3-D hardness mapping; .csv for im-porting into 3rd party software packages (such as LIMS); testXpert III for user friendly standardised reporting and data storage.

7

Fig. 1: ZHV30/zwickiLine unit for optical hardness test methods Fig. 2: ZHV30/zwickiLine hardness testing machine

ZHV30/zwickiLine Vickers Tester

Precise Control

The ZHV30/zwickiLine hardness tester covers Vickers hardness tests to ISO 6507 and ASTM E 384 and Brinell hardness tests according to ISO 6506 within the load range from 0.98 N to 294 N.

The ZHV30/zwickiLine is a combination of a zwicki-Line hardness testing machine, a unit for optical hardness test methods and of the testXpert hardness edition testing software. The system uses a top-loading con-cept, in which the specimen is mounted on the support and the unit is automatically lowered to the specimen from above, providing maximum flexibility regarding specimen heights. The unit is also equipped with a high-precision load cell, a GigE camera and a 5-position turret for up to 4 lenses and 1 indenter. A wide practical application range is ensured, with different objective lenses covering total magnifications from 50x to 600x.

The turret is available in manual or motorized form for changing from lens to indenter position. Manual or mo-torized x-y tables plus controllers can be combined as required to provide a tailored testing solution in line with the customer‘s requirements. The system is operated and controlled entirely by the software.

The system is used in semi or fully automatic mode, also for multiple traverse testing including automatic focusing and automatic indentation size measurement.

A testXpert master test program contains series testsfor the Vickers, Knoop and Brinell methods. Optionaladd-ons are available for automatic indentation mea-surement, focusing and for traverse testing (including multiple traverses), with manual or motorized x-y tables.

Alternatively, the fully automatic system of this hard-ness tester can also be used with the testing software High Definition (see page 16).

8

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Fig. 2: ZHV10 PC versionFig. 1: ZHV10 analog version

ZHV10 Vickers Tester

Progress in Tradition

The ZHV10 Vickers hardness tester has a proven track record, especially with:• Vickers hardness,• Knoop hardness,• Brinell hardness,• Casedepth-hardening, hardening and nitriding depth,• Scratch hardness (analog unit only).

Loading weights from 0.2 kg to 10 kg (optionally up to 30 kg) and exchangeable lenses for various magnifica-tions and image areas are available for both versions.

Hardness tables are used to evaluate the hardness value when using the analog unit.

The PC version uses testXpert hardness edition testing software. As well as being simple to operate, testXpert adapts to varying test conditions with great flexibility. This equipment includes a video adapter with a high inherent magnification (approx. 40 fold) which is integrated in the measurement microscope in front of the GigE camera (1.4 megapixel). The LED illumination enables a considerably lower heating up of the measu-ring microscope and a longer life span.

Various x-y table variants are available:• with manual micrometer screws or • with digital micrometer screws for data transfer of the

measured coordinates to testXpert hardness edition

Various prisms and clamping devices as well as a paral-lel vice for fixing the specimens are optional extras.

9

4 Rockwell Hardness Testers

ZHR Rockwell Tester

Unique Accessibility

The ZHR Rockwell hardness testers cover the following methods:• Classical Rockwell: ZHR 4150

(preload: 10 kgf; test load: 60; 100; 150 kgf)• Superficial Rockwell: ZHR 4045

(preload: 3 kgf; test load: 15, 30, 45 kgf)• Combined Rockwell and Superficial Rockwell:

ZHR 8150 (preload: 3, 10 kgf; test load: 15, 30, 45, 60, 100, 150 kgf)

• Jominy hardness traverse testing to Rockwell

The machines are available with various levels of opera-ting convenience:• Models with onebutton operation for straightforward

testing situations (Type AK, Type BK)• Models with linedisplay and integrated conversion

functions for standard applications (Type LK)• Models with touchscreen, expanded functions and

high level of operating convenience for wideranging test situations (Type SK/TK).

This range of hardness testing machines features mo-dular design, with a wide variety of equipment, allowing the ideal combination to be produced for each applica-tion.

A special feature of our Rockwell hardness testers is a nose-mounted indenter for testing difficulttoaccess measuring positions. Operation is straightforward, thanks to:• Automatic test cycle,• Automatic loading and unloading,• Automatic evaluation, including conversion,• Load-weight selection using rotary knob or via touch-

screen (automatic load changing).

These testers are of rugged construction, with a play-free ballbearing spindle, test areas up to 250 mm as standard and optional 375 mm height for large workpi-eces and an integrated RS-232 interface for connection to testXpert III.

Zwick Roell can also provide a standardized solution for the Jominy end quench test (Rockwell traverse testing, ISO 642 and ASTM A2555).

Fig. 1: ZHR 8150SK and ZHR 4150AK Rockwell tester

10

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

ZHR8150CLK Universal Rockwell Tester

Specialist for depth measurements

Get reliable test results with the ZHR8150CLK hardness tester, with more than 30 different testing applications using depth measurement methods, e.g. Rockwell & ball indentation tests.

The closed loop force application enables testing ac-cording to a wide range of test methods with only one hardness tester, including:• Metal – ISO 6508 & ASTM E18• Plastic – ISO 2039-1 & -2, ASTM D785• Carbonaceous – DIN 51917• Laminate flooring – ISO 24343-1

The nose mounted indenter allows access to difficult-to-access measuring locations.

Fig. 1: ZHR8150CLK during a ball indentation test

Automatic testing cycle, a depth measurement resolu-tion of 10 nm and automatic conversion to alternative scales, saves time and guarantees a high level of test result accuracy and reproducibility.

The robust construction with a pre-tensioned leadscrew and the simple operation is optimal for a shop floor environment.

And the results?Experience the intelligent Zwick testing software by ex-porting your results via USB to testXpert III or into your own data base system.

11

5 Instrumented Indentation Hardness Testers

ZHU/zwickiLine+ Universal Tester

Innovation & Competence

The ZHU/zwickiLine universal hardness testing ma-chines can be used for all the classical testing me-thods, including Rockwell, Vickers, Brinell and ball indentation hardness. They are also wellsuited to the innovative instrumented indentation test. This is used to determine hardness plus additional mechanical materials parameters and is known as Martens hard-ness (ISO 14577). Furthermore cyclic indentation tests with increasing test force or indentation depth and partial load removal are realized in the testing software testXpert hardness edition.

Fig. 1: ZHU2.5/Z2.5 universal hardness testing machine with motori-zed hardness measuring head

The ZHU/zwickiLine+ features a hardness measuring head (resolution 0.002 μm) with integrated digital depth and depth force measuring system, mounted in a zwickiLine+ testing machine. Combine our stateoftheart measuring and control electronics testControl II and our intelligent testing software testXpert hardness edition and the result is a wellbalanced, high-precision measuring system.

Also available is an add-on optical unit which, when used with the hardness measuring head, allows any current hardness method to be tested. The optical unit consists of a measuring microscope with various lenses and a linear displace ment unit. The linear displacement unit allows a change from the hardness measuring head with indenter to the optical unit position without the specimen being moved.

Fig. 2: General layout of the hardness measuring head

housing

load measuring system

indentation depth measuring system

indenter

transducer foot

Fig. 3: ZHU/zwickiLine+ with testXpert hardness edition

12

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Indentation depth methods:• Instrumented indentation test (Martens hardness,

ISO 14577)• Rockwell hardness HR - ISO 6508• Rockwell hardness HR - ISO 2039-2• Vickers depth measurement HVT• Brinell depth measurement HBT• Ball indentation hardness H (for plastics) - ISO 2039-1

Indentation area methods:• Vickers hardness HV - ISO 6507• Brinell hardness HBW - ISO 6506

The ZHU/zwickiLine+ range is complemented by a comprehensive, standardized range of accessories. This includes a highly varied selection of indenters, hardness test blocks and clamping systems.

Options

Accessory for materials testingCombine the hardness testing ma-chine with tools or grips for com-pression, bending or tensile tests.

More than just hardness

• Universal, material-independent application for practi-cally all hardness testing methods with indentation depth measurement

• High accuracy and repeatability of test data through high-resolution measurements and constant test conditions

• Automatic display of force-indentation-depth curve regardless of method, for comprehensive materials characterization in instrumented indentation test to ISO 14577

• High operating comfort with changing test conditions due to fast and precise AC drive and large test area, e.g. for different specimen sizes

• Multiple use as a hardness testing machine and/or as a testing machine for tensile, compression & bending tests

• Versatile result presentation: single and statistical values, graphics, onscreen display, and test reports can be varied as required

testXpert testing softwareThe intelligent testing software testXpert supports the innovative testing system in standard testing situations (e.g. quality assurance) as well as in research and development for very sophisticated tasks.

LED illuminationThe frontlight coaxial lamp has LEDs for longer life and greatly reduced heating of the measuring micro-scope.

X-y tablesManual or motorized x-y tables with travel up to 150 mm are available.

Hardness measuring headsTo facilitate highprecision measure-ments in various application areas, two hardness measuring heads are available:2 N … 200 N or 5 N … 2.5 kN

Optical unitThe optical unit consists of a measuring microscope with various lenses and a displacement unit for easy changes between indenter and optics positions.

13

ZHN Nanomechanical Tester

A new Dimension

The Universal Nanomechanical Tester ZHN‘s unique force and displacement resolution enables comprehen-sive mechanical characterization of thin films and coa-tings or small surface areas, including measurement of indentation hardness, indentation modulus and Martens hardness to ISO 14577.

Two patents cover ZHN‘s measuring heads:• the Normal Force Unit (NFU)• the Lateral Force Unit (LFU)

Working with one measuring head (Normal Force Unit), ZHN functions as a depth-sensing hardness tester in the micro range, with a maximum force of 2 N. It can also be used in the nano range for indentation depths less than 200 nm.

A 0.2 N head with ten times higher force resolution is optionally available.

A unique feature of the ZHN is the second independent measuring head with the same excellent resolution for the lateral direction, the Lateral Force Unit. The two measuring heads can be combined in any way required - for a greatly increased range of measuring options.

The instrument can considerably additionally be used as:• a micro scratch tester• a micro wear tester• a fatigue tester and• a high-resolution profilometer.

Fig. 1: ZHN universal nanomechanical tester fully equipped with nor-mal force unit (NFU) and lateral force unit (LFU)

Fig. 2: ZHN with housing for thermic and accustic isolation

14

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Other unique features:• Both measuring heads can work in compression and

tensile mode.• Dynamic measuring modes are available for both

heads. Small oscillations with a frequency of up to 300 Hz are added to the force or displacement signal, allowing virtually continuous analysis of contact stiff-ness.

• Extremely robust construction eliminates any risk of sensor damage and allows easy handling.

• The standard diamond indenter can easily be repla-ced by other indenters of any shape and material wit-hout a substantial loss of accuracy, particularly useful for special wear or adhesion tests.

The instrument is combined with x-y-z tables with travel ranges of 100 mm (x), 200 mm (y) and 70 mm (z) with a resolution of 50 nm. It also includes high-resolution optics, with two cameras and an auto-focus system. Many elements of the instrument can be adapted to suit customers‘ requirements.

Additional features:• User-friendly software operation with the software

InspectorX, especially designed for the analysis of instrumented indentation tests

• Fully automatic approach, even with varying specimen heights

• Fully automatic measurements, including image generation of the measurement positions; any measu-rement sequences programmable

• Virtually unlimited number of measurement positions can be preset

• Shortest possible testing times• Multiple curve overlay for direct comparison of all

curves in a series• Configuration of user-specific test sequences (appli-

cations)

Options

Optional softwareThe QCSM method allows measu-ring the contact stiffness of the sample with the help of an unload curve for many points during the indentation procedure.

IndentersAll types of indenters can be deli-vered, e.g. Vickers, Berkovich, Cube Corner, Knoop, spheres, flat punch or wedge.

Sample holdersThere are different types of sample holders available: 1x for Ø 50 mm and 5x for Ø 24 mm, and even various holders for foils, thin sheets or wires.

Lateral Force UnitSecond independent measuring head with the same excellent resolution for the lateral direction for the measurement of wear, fatigue and as a micro scratch tester.

Optic variantsAdditional to the installed 50x objective lens a 5x lens it is possible to install a 5x lens, an AFM (Atomic Force Microscope) or a White lite interferometer.

Vibration isolation systemsFor the optimal use of the tester an active vibration isolation system and a low vibration base frame are recommended.

15

Stage pattern windowCreate or modify traver-ses and/or patterns and their positions, then see the stage move in real time in the stage pattern window.

Results windowResults are clearly displayed in graphical or tabular form. Track and review individual indentations.

Image windowThe intuitive image window interface allows easy viewing of specimen surface and indents.

Individual WorkspaceMaximize your workspace by running in a high-resolution environment of 1920 x 1200 pixels or more.

6 Testing Software

High Defi nition Testing Software

User-friendly Precision

When a hardness testing solution which delivers reli-able, accurate and repeatable test results is needed, choose from the ZHμ.HD line of macro and micro hard-ness testing solutions - fi eld-proven systems, offering beyond comparison capabilities and fully ASTM E 384, ISO 6507 and ISO 4545-compliant.

Precise positioningWith its image of the entire specimen by 2.5x lens or via scan function and its annotation tools, ZHμ.HD Soft-ware enables you to position indents precisely where they are required.

Precise, repeatable measurementsThe high image resolution of the ZHμ.HD Software allows measurement of indents to be precise and repeatable.

Enhanced productivityThe ZHμ.HD Software combines ease of use, reliability and auto-calibration, minimizing the subjectively asso-ciated with human intervention. The system can run autonomous for hours without interruption.

Sophisticated reportingThe results are automatically transferred via data inter-face from ZHμ.HD software to testXpert III - the testing software for all Zwick testing machines and instruments. According to your requirements the reports are now generated.

16

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Step 1: Set the entire specimen (1

Place the specimen in the specimen holder and - with one click - build a high resolution overview image of the specimen and set reference points for more traverses using annotated tools.

Building mosaic image to a complete image Precise positioning at any magnifi cation

Step 2: Set-up traverses/patternsOpen, modify, or create new traverses/patterns using reference points or lines. Traverses and patterns can be individually adjusted.

T-Bar rotation tool Traverse centred in weld sample

Three traverses perpendicular to edge

Five traverses perpendicular to the edge of the gear

Step 3: Click & walk awayZHμ.HD Software intelligently follows the predefi ned patterns, indents the specimen, focuses if needed, measu-res and generates data dynamically. Everything is automated, freeing users for other tasks.

Precise imaging with 10 x objective lenswith 2.5 x objective lens with 40 x objective lens

Step 4: Get resultsReview results in graphical and/or tabular format. Export results to the spreadsheet application of your choice, or to testXpert III for creating and printing standard or customized reports.

(1 Function not availble in the US

17

Video image showing measured valuesThe status bar of the video image screen incorporates a button for confirming the measured lines. The hardness value and the gage lengths are displayed automatically and accepted as results by pressing the button.

Virtual z axis controlThe motorized z axis of the hardness tester is moved via the software by means of a virtual slider, using the mouse.

The menu bar appears at the top of the user interface in all layout windows, with the toolbar underneath and the serial tree on the left.

testXpert hardness edition

Intelligent & Reliable

One basic software for all applicationstestXpert employs the same basic software system for all hardness applications. It is responsible for data, user and test program management, as well as communica-tion between the hardness testing machine or hardness testing device and other peripheral systems.

Virtual x-y axis controlThe motorized xy table is moved in steps by means of the „arrow“ buttons or continuously by displacing the circle (while holding the mouse key). The degree of displacement determines the traversing speed.

Master test programsMaster tets programs cover the test categories which are designed for frequently changing or complex test requirements. With a minimum of effort and previous knowledge it is possible to• create and alter test programs,• configure screen views according to individual needs

and• create task specific test reports.

The intelligent software wizard guides you rapidly through all menus, running consistency checks at the same time.

Two master programs are available for hardness testing machines and devices:• Optical hardness testing methods (Vickers, Knoop,

Brinell)• Instrumented indentation test and hardness testing

method with indentation depth measurement

18

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Two different lenses can be used in hardness traverse tests: an overview lens for checking the indentation position and a measuring lens for measuring the indentation size.

Definition of traversesSimple configuration, copying, shifting and modification of hardness traverse tests take place in the „Traverse test definition“ mask. Existing samples can be stored and exported or imported and modified.

Configuration of a test sequenceThe test sequence is simple to adjust with regard to checking of the indentation position, autofocussing prior to indentation measurement and automatic indentation measurement.

Presentation of test results and test reportsIn testXpert the test results are displayed automatically in graphic and tabular form and are statistically evalu-ated. The user interface and the standard report are simple to adapt to the user‘s requirements.

User managementtestXpert includes a user management system with dif-ferent access options available to defined user groups. New groups are simple to define and configure.

The results are inserted automa-tically in the standard test report. The standard test report already incorporates the parameter data, the statistics and the graphic representation of results. The report is exported in PDF or RTF file format.

19

InspectorX Testing Software

Thin layers perfectly analyzed

InspectorX is the intuitive control and analysis software of load-displacement data for the determination of me-chanical parameters with the ZHN Nanoindenter. For small depths of indentation it is very important to gain a high accuracy of the correction functions for the tip shape as well as for the zero point (position of the surface) and thermal drift.

InspectorX offers especially sophisticated correction routines and algorithms, whose quality was proven, for instance, by comparative measurements of the Physika-lisch-Technische Bundesanstalt (PTB):

• Determination, description and correction of instru-ment compliance or stiffness

• Determination and description of indenter area func-tion (24 different fi t functions available)

• Zero point correction (automatic or manual) • Thermal drift correction (automatic or manual) • Creep analysis (fi t of the creep curve, calculation of

creep rate) • Analysis of dynamic data (continuous or quasi conti-

nuous stiffness measurement) • Special analysis of wholly elastic measurements using

a Hertzian contact model for coated materials with up to three layers

• Determination of stress-strain curves of metals from indentations with spherical indenters

Step 1: Choose force unit (NFU / LFU)

Step 2: Select the indenter

Step 3: Choose sample holder (e.g. 5x)

Step 4: Selectsample / enter the sample data

Step 5: Defi ne test method (e.g. QCSM)

Step 6: Set positions (acc. to test method)

Step 7: ...Measure!

Main window after initializa-tion of the x-y stages

20

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

Control of the precision stagesThe device is designed for fully automatic measurement series with more than 1000 possible measuring posi-tions. The control software InspectorX gives a complete overview of the actual positions of the three precision stages and allows easy control with step sizes below 1 μm. When the sample is positioned under the micro-scope, an image of the sample surface is shown in the same window instead of the stage positions.

Defi nition of the measuring positionsAny number of positions can be programmed optionally in lines, columns, grids or in irregular arrangement. Unique features are the possibility to defi ne different measuring procedures for every position and to auto-matically generate pictures with two different magni-fi cations before and after the measurement using the autofocus function. Comprehensive sample information can be assigned to every position and will be stored in data fi les.

Defi nition of the measuring procedureA large number of predefi ned applications that may be selected by a simple mouse click is available. Proce-dures (test cycles) with any number of load-unload segments can be programed and modifi ed in a very fl exible manner. Force or displacement, measuring time and data rate of a segment can be defi ned in “open loop mode” while in “closed loop mode” the number of data points and the dwell time per point may be set in addition.

Evaluation of measurement dataLoad-displacement curves or other data can be gra-phically presented, compared, averaged or exported in different formats. Comprehensive and fl exible correction routines are available for data evaluation. Parameters for the analysis and the presentation of results can be stored in confi guration fi les and exchanged among others.

Fig. 1: Control of the precision stages

Fig. 2: Indentations with a Berkovich indenter

Fig. 3: Appplication window

21

7 Portfolio Overview

ZHU250CL ZHU250 ZHU187.5 ZHVµ ZHV30

Test loads 4.9...2454 N 4.9...2454 N 29.4...1839 N 0.1...19.6 N 1.96...294 N (all models)

Application Metals Metals Metals Metals Metals Plastics Plastics Plastics1) Ceramics1) Plastics Ceramics Ceramics Ceramics1) Ceramics

Rockwell - - Superfi cial Rockwell - - - Rockwell (L, M, R) - - Ball indentation - - - HVT, HBT - - - Instr. indentation - - - - - Martens - - - - - Vickers Knoop 1) 1) - Brinell - 1)

Software HD (+ tXpIII) testXpert III testXpert III HD (+ tXpIII) HD (+ tXpIII)

Test area, max. 375 x 150 300 x 250 250 x 150 150 x 150 250 x 150 (H x D in mm)

Versions ZHU250CL-s - ZHU187.5 ZHVμ-m ZHV30-m ZHU250CL-a ZHU150 ZHVμ-s ZHV30-s ZHVμ-a ZHV30-a

1) suitable, however limited load range/material-dependent

22

Zw

ick

Ro

ell G

roup

Har

dne

ss T

este

rTe

stin

g S

oft

war

eO

verv

iew

ZHV30/zwicki ZHV10 ZHR ZHR8150CLK ZHU/zwicki+ ZHN

0.98...294 N 1.96...98 N 147...1471 N 4.9...1471 N 1.96...2452 N 0...2 N Metals Metals Metals Metals Metals Metals Ceramics Plastics Plastics Plastics1) Plastics Carbonate Ceramics, Paper Ceramics

- - - - - - - - - - - - - - - - - - - - - - - - - - - - 1)

- - - - 1)

1) 1) - - -

testXpert testXpert testXpert III testXpert III testXpert InspectorX HD (+ tXpIII) InspectorX

670 x 99.5 300 x 135 250 x 150 250 x 150 675 x 105 70 x 200

turret manual/ ZHV10 analog AK/BK/LK/SK/TK - ZHU0.2 0...2 N motorized ZHV10 PC 4045/4150/8150 ZHU2.5 0...0.2 N manual/motorized LFU linear displace- ment unit 1) suitable, however limited load range/material-dependent

23

Zwick Roell AGAugust-Nagel-Str. 11D-89079 UlmPhone +49 7305 10 - 0Fax +49 7305 10 - 200info@zwickroell.comwww.zwickroell.com

The Zwick Roell AG Group

Zwick GmbH & Co. KGwww.zwick.com

Indentec Hardness Testing Machines Ltd.www.indentec.com

Your local company – worldwideZwick UKwww.zwick.co.uk

Zwick Francewww.zwick.fr

Zwick Beluxwww.zwick.be

Zwick Venlowww.zwick.nl

Zwick Italiawww.zwickroell.it

Zwick Ibéricawww.zwick.es

Zwick Norgewww.zwick.no

Zwick Sverigawww.zwick.se

Zwick CR, SRwww.zwick.cz

Zwick Polskawww.zwick.pl

Zwick Avrasyawww.zwick.com.tr

Zwick USAwww.zwickusa.com

Zwick Brazilwww.panambrazwick.com.br

Zwick Asiawww.zwick.com.sg

Zwick Chinawww.zwick.cn

Zwick Koreawww.zwick.co.kr

Zwick Indiawww.zwick.co.in

Zwick_allg_RS_EN_CMYK.indd 1 20.12.11 15:40