Hansen P4 Multistage

ansen

Fitness for use

With the Hansen P4 product line you can easily select what you need , thereby optimizing your investment.

Hansen P4 features Your benefit

� Specific housings for � Easy to select the

horizontal and vertical optimal gear unit for a

applications specific application -

value for money

� Standard higher � Stronger shaft support

bearing span for for surface aerators,

vertical applications mixers ...

� Housing and bearing � The gear unit takes full

construction in vertical machine load

applications designed

to take external loads

� Simple, standard systems � Proven and cost

for cooling and lubrication effective solutions

� Accessories and � Easy and fast

instrumentation are customization

offered as catalogue possibilities

options

Your benefits

Power and reliability

The excellent constructional rigidity of Hansen P4, together with the commitment to apply state-of-the-art gear technology, leads to remarkable power and performance


� Rigid, standardized pinion � Better lateral load shafts and housings distribution, lower

noise and vibration levels

� Full-scale application of:

� High torque geometry � Better strength / in low speed gear sets surface durability

rating balance

� Low noise geometry � Lower noise andin high speed gear sets vibration levels

� Profile-controlled gas � Optimal load carburizing capacity

� Protuberance hobbing � Improved tooth of helicals and root strength filled grinding ofbevels

� Precision grinding with � Optimal transverse sophisticated tooth and lateral load contact analysis distribution, lower

noise and vibrationlevels

� Assured oil circulation � Long, troublefree through the bearings working life

Your benefits

Installation

Even the larger Hansen P4 models are easy to trans-port, manoeuvre and install.


� Provision for crowbar � Easy installation

on smaller housings procedure

and adjusting screws

on larger housings

� Oval transport slots for � Easy to handle and

horizontal applications; install

hoist eyes for vertical

applications

� Standard fixation � Easy to mount accessories

points for accessories such as protection caps

� Internal construction � Bearings safely lubricated

ensures oil supply to from the start

all bearings on first

oil filling

Spare parts, service and maintenance

The Hansen P4 is one of the easiest to maintain gearunits on the market. The maintenance operation itselfhas been simplified and shortened


� 50% reduction of gear � All standard gear components used in the components availablecomplete range of gear worldwide from stockunits

� Housings for horizontal � Easy to open for and vertical applications inspection and serviceboth with horizontal split on-the-spot

� Maintenance-free � Oil-tight for life - noOil-LockTM seal as maintenance required a standard on the high speed shaft extensions

� Drywell standard for � Oil-tight for life vertically down shaft

� Easy to remove inspection � Easy and quickcover with O-seal above inspection withoutthe oil level oil drainage

� Provision for easy � Easy to open for service removal of covers on-the-spot

� Specific housings for � Total oil evacuation horizontal and vertical possibleapplications

� Rounded external design � Smooth surface without dirt-retaining cavities

ansen

PRODUCT RANGE

1000 lbf.in 53 80 140 210 310 470 670 900 1160 1530 1990 2560 3100 3600 4400 5300 5800 7000

A B C D E F G H J K L M N P Q R S TSize

Size Center distance 1000 lbf.in

A

y z a b c d e f g h j k l m n p q r s t53

B

C

D

E

80

140

210

310

F

G

H

J

K

L

M

N

470

670

900

1160

1530

1990

2560

3100

P

Q

R

S

T

3600

4400

5300

5800

7000

ansen

PROGRAM

A3

A H 2 B1 C1

J Q 2 B1 C2

C H 3 B3 C3

J T 3 B3 C4

Motor-reducer B3 C5

D H 4 B5 C7

Parallel shafts J T 4 B5 C8

A H 2 B9 C9

J M 2 B9 C10

C H 3 B11 C11

J T 3 B11 C12

D H 4 B13 C13

Right-angle shafts J T 4 B13 C14

B.

A4

C F 2 B17 C21

Motor-reducer B17 C22

C H 3 B19 C23

J T 3 B19 C24

Motor-reducer B19 C25-C26

D H 4 B21 C27

Parallel shafts J M 4 B21 C28

C F 2 B25 C29

G M 2 B25 C30

C H 3 B27 C31

J T 3 B27 C32

D H 4 B29 C33

Right-angle shafts J T 4 B29 C34

B.

A4C35

H

V

Q

P

R

P

R

• Cooling Coil• Options • Dipstick & magnetic plug (removal)• Shrink disc connection• Keyed connection

• Cooling Coil• Options

Code Q 2 3Size Stages

Hansen P4gear unit

Rating tables

Dimensional drawings

Horizontalapplications

Verticalapplications

1

Page4 5

ansen

C15

C16C18

C19-20

A

DESCRIPTION

Basic components

Helical and spiral bevel gearsDesigned and rated in accordance with AGMA, ISO for maximum loadcapacity, minimum losses and quiet operation.The rating tables show the mechanical power ratings P expressed in hp,i.e. the power which the gear unit can transmit during 10h/day, at uni-form load, whereby 5 peak torques up to 200% of the nominal torqueand lasting not more than 5 seconds each, are allowed.The mechanical power ratings shown in the tables relate respectively to input speeds of 1750, 1460, 1160 and 870 rpmat the high speed shaft. They are also valid for full load speed which aremax. 3% lower than the synchronous speeds.Interpolation will yield power rating values for intermediate speeds. Thepower rating for speeds lower than 870 rpm is based on the continuoustorque rating of that speed.For input speeds exceeding 1750 rpm, please refer to us.All geared components are manufactured from alloy steel, gascarburized, hardened and ground.The same applies to all intermediate and high speed shafts which aregenerally designed as pinion shafts.

Low speed shaftsThe low speed shafts are available in solid or hollow version. Hollowshafts are cataloged with shrink disc connection as standard. For keywayconnection: data upon request.

BearingsHeavy duty roller bearings of the tapered, cylindrical or spherical rollertype.Calculated in compliance with AGMA, ISO and renowned bearingmanufacturers.

Housings, bearing housings and coversMade from grey pearlitic cast iron;Machined on CNC machining centers;Designed to ensure strength and rigidity.

Systems

LubricationLubricants: as a rule, mineral oils are used. Lubricants should alwayscontain adequate EP-additives (refer to Service Manual).Horizontal shafts: splash lubrication is standard Vertical shafts: pump lubrication is standardThe gear unit housing acts as a large oil sumpOptional equipment : refer to page A5Forced feed lubrication, with oil filter and cooler is recommended for ab-sorbed powers exceeding 1000 hp.Pressure lubrication: if specified in the selection tables

Cooling Heat generated in the gear unit while running, can be dissipated by:• natural cooling through the housing• fan cooling (p.A7) • cooling coil (p.A7) • water or air cooler (p.A7) For thermal check, refer to page A4

SealingStatic: generalized use of sealing compound

inspection cover: O-ringvertical low speed shaft, shaft down: dry-well

Rotary: high speed shaft: Oil LockTM : - dual purpose labyrinth- maintenance free- oil return to sump

low speed shaft: dust lip oil sealgrease purged labyrinth seal optional.

Accessories

Motor lantern and scoop: optional (page B35)• motor lantern housing standard for 3 stage gear units with parallel

horizontal shafts (dimensional drawings refer to page C5)• motor lantern housing standard for 2 and 3 stage gear units with parallel

vertical shafts (dimensional drawings refer to page C22 and C25/26)

Motor base: optional (page B35)

Torque arm: optional• Fixation point: refer to dimensional drawings• Execution and dimensions: refer to us

Backstop: optional• Sprags, centrifugally lift-off type• Lubricated by gear units' oil sump• Easy service access• Envelope dimensions: refer to dimensional drawings

Heaters: optionalImmersion oil heater for low temperature start-up is optional.

Shipping conditions

Inspection prior to shipment• No load test• Conformance check to order specifications

Protection• Painting: - outer side housing: all standard Hansen P4 gear units are

provided with a high durability enamel coating. Surface protection : good corrosion protection for

many years in a non-aggressive atmosphere. Dry film thickness : 1.6 - 2.4 mils (primer included).- Optional humidity resistant paint and high resistant

paint are available. - inner side housing: oil resistant paint

- inner components: sprayed with rust preventive oil• Shaft extensions: covered with petroleum base corrosion resistant coating. Lubricants• Units are shipped without oil• Grease lubrication points are factory filledFor information relating to storage, handling, installation, starting-up andmaintenance, refer to the Service Manual which is supplied with each unit.

ansen

A1

REQUEST FOR QUOTATION97QX-00000002Z A Ref : Date : Name : Signature :

APPLICATION:

1. LOAD Motor power Pm = hp at rpm Absorbed power Pa = hp Absorbed torque Ta = lbf.in Running time in h/day ≤3 ≤10 >10 Peak torque in excess of 200% Ta = % Number of starts-stops/per 10 hours ≤5 >5 Bidirectional load Y N Backstop required Y N

2. SPEED Constant speed variable speed Constant torque across the speed range Constant power across the speed range High speed shaft (HSS) n1: ≤ rpm ≤ direction of rotation : CW CCW Low speed shaft (LSS) n2: ≤ rpm ≤ direction of rotation : CW CCW solid LSS : hollow LSS :

3. PRIME MOVER Electric motor Internal combustion engine: single cylinder multi cylinder Variable speed motor - constant torque - constant hp

4. CONNECTION MOTOR/GEAR UNIT Flexible coupling Hydrodynamic coupling V-belt drive: pulley diameter: motor: in / gear unit: in belt section: number of belts: Other: ...

5. CONNECTION GEAR UNIT/APPLICATION solid shaft : coupling ............................................................ chain sprocket ............................................................ pinion ............................................................ other to specify : hollow shaft :

6. OVERHUNG LOAD ON LOW SPEED SHAFT Y N Radial load = lbf Distance from application point to gear unit shaft shoulder = in Direction to specify on sketch below Thrust load Towards gear unit = + lbf Away from gear unit = - lbf

Sketch of applicationTOP VIEW

SIDE VIEW

please indicate tilt angle if ≥ 5/1000

7. BRAKE Y N Drum Disc Dia: in N° of callipers Nominal torque: lbf.in Peak torque: lbf.in Braking frequency: ≤10/h ≥10/h At which shaft: HSS ISS LSS HSS 2nd shaft end

8. OPERATIONAL PARAMETERS Ambient temperature (°F) min: max: Location : small enclosure indoor outdoor Direct sun exposure Y N Max. sound pressure level : dBA at ........... feet Atmosphere: humid dusty aggressive, to specify

Electric installation AC DC V Hz 3 Ph 1 Ph Main power supply .... .... Auxiliary power supply .... .... Protection requirement: Insulation: If additional cooling is required, check & specify method to be used: Fan Oil-to-air cooler Cooling coil Oil-to-water cooler Availability of water Y N if salt or aggressive, specify

Other data available in :

CW

CW

CW

CW

ansen

A2

Servicefactor

SF

SELECTION - Mechanical power rating97QX-00000012Z B

Type H : Horizontal low speed shaft

(or inclined < 45°) V : Vertical low speed shaft

Parallel shafts possible? Yes P : Parallel shafts No R : Right-angle shafts

Reference Data

Application

Load conditions

Prime mover

SF

Size

Number of stages

Ratio

Mechanicalpower rating P

P

Actual absorbed powerPa and/orMotor power Pm

SF P x ≤

High speed shaft extension L: left U: up R: right C: right-angle T: two shaft extensions

Low speed shaft extension L: left U: up R: right D: down T: two shaft extensions

Low speed shaft type N: normal solid shaft D: shrink disc hollow shaft K: keyway hollow shaft

Page A6



N : dimensional drawingsD : dimensional drawings and page C17K : data upon request

Program survey in introduction.

Code Q2 3 4 5 - 6 7 8 - 9

2

3

5

9

4

7

8

6

Example

Conveyor drive Pa = 72 hp, n2 = 35 rpmMechanical power rating• Horizontal low speed shaft• Right-angle shafts required- application: see above- load conditions: heavy duty 16h/24h- prime mover: electric motor SF = 1.5 (page A6)

Pa x SF = 72 x 1.5 = 108 hp• Ratio:

• Size and number of stages : mechanical power rating P = 110 hp (page B11) check : Pa x SF = 108 hp ≤ P = 110 hp dimensional drawings on page C11• Right-angle shafts• Machine shaft to the right• Hollow shaft with shrink disc

n1 1750n2 35i = = = 50

Thermal power rating (page A4)Gear unit without forced cooling: Ptn = 68 hp (page B16)Ambient temperature 85°F: a = 0.87Operating time: 16h/day: b = 1 > 4000h/yearMounted outdoors: c = 1.33

check: 72 hp ≤ 68 x 0.87 x 1 x 1.33 = 79 hp

No extra cooling is required.

Please indicate gear unit type on the gear unit specification sheet (page A5):

Detailed example of selection: refer to page A8

3R

2H

SF

RR

Solid shaft Hollow shaft

1 Q

2 H

3 R

4 D

5 3 -

6 C

7 R

8 D -

9 5 0

P

Procedure

Series Q : Hansen P41

1

for

P

Q • • • - -

HHHHHH

2 p. B13 p. B34 p. B52 p. B93 p. B114 p. B13

PPPRRR

VVVVVV

2 p. B173 p. B194 p. B212 p. B253 p. B274 p. B29

PPPRRR

ansen

A3

950

4D53

6C7R8D

Ptn for gear unit without forced cooling

SELECTION - Thermal rating97QX-00000022Z A

factor a for ambient temperature without forced cooling

Reduction Ambient temperature in °F

Ratio 60 to 75 75 to 95 95 to 115

6.3 11.2 1 0.81 0.78 0.68 0.55 -

12.5 18 1 0.85 0.81 0.71 0.66 0.6

≥ 20 1 0.87 0.85 0.75 0.74 0.7

Size A T A H J T A D E H J T

OK

Thermal check

Cooling fan possible

No forced cooling required

Ptf for gear unit with 1 fan

Pa ≤ Ptf • d • b ?

2 cooling fans possible

One fan

Ptff for gear unit with 2 fans

Pa ≤ Ptff • d • b ?

Water available

Double fan

Additional P for cooling coil

Pa ≤ (Ptn • a • c + P )•b Cooling coil

Pa ≤ (Ptn • a • c + P ) • b ? Cooling groupsize W...

factor b for duration of service

h/year h/day (max)

3 10 >16

1000 1.2 1.3 1.4 1.5 1.15 1.2 1.3 1.4 1.15

2000 - - - - 1.1 1.1 1.2 1.3 1.1

≥ 4000 - - - - - - - - 1

Size A D E G H L M T A D E G H L M T A T

factor d for ambient temperature with forced cooling

Number of Ambient temperature in °F

stages 60 to 75 75 to95 95 to 115 115 to 130

with 2 1 0.86 0.72 0.59

forced cooling 3 & 4 1 0.88 0.75 0.62

P oil-to-water cooling groups (hp)

size W1 W2 W3 W4

2 stages 315 560 980 1340

3 stages 235 415 740 1000

4 stages 190 335 590 800

P oil-to-air cooling groups (hp)

size A1 A2 A3 A4

2 stages 235 430 700 1180

3 stages 175 330 520 885

4 stages 140 260 415 710

Reference Data

Pa ≤ (Ptn • a • c + P • d) • b ? Cooling groupsize A...

No water available

Additional P for oil - to - air cooling group

Additional P for oil - to - water cooling group+tw

+tw

+tw

+ta

+ta

+ta

OK

OK

OK

OK

OK

+tc

+tc

factor c for air circulation (without fan)

Mounting Air flowIndoors - small enclosure ≥ 1.6 ft/s 0.73 0.70 0.65Indoors - normalworking area ≥ 4.6 ft/s 1 1 1Outdoors - protect-ed against sun ≥ 9.8 ft/s 1.33 1.36 1.40

Size A D E H J T

Pt

Q • • • - -

2 p. B73 p. B84 p. B82 p. B153 p. B164 p. B16

PtPtn, Ptf

Ptff, P

for

HHHHHH

PPPRRR

2 p. B233 p. B244 p. B242 p. B313 p. B324 p. B32

VVVVVV

PPPRRR

+tc

To be applied only if basicthermal power ratings are listed

To be applied only if basic thermal power ratings are listed

Pa ≤ Ptn • a • b • c ?

ansen

A4

GEAR UNIT SPECIFICATION97QX-00000012Z B Ref : Date : Name : Signature :

4. PAINTING :

enamel coating

humidity resistant painting

high resistant painting

5. INSTRUMENTATION :

oil level : switch p.C15/C35

oil sight glass p.C15/C35

oil flow switch (only for V-types) p. C35

oil sump temperature

fixed alarm

adjustable alarm

meter Pt100

with transmitter

if cooling system or pressure lubrication : p. A7

filter contamination : - mechanical indicator

- electrical indicator

duplex filter

if oil-to-water cooler :

thermostatic valve water flow p. A7

if oil-to-air cooler :

fan thermoswitch p.A7

* refer to dimensional drawings

1. MOTOR MOUNT :

NEMA frame :

(If not NEMA, add dimensional drawing)

lantern housing p. B35 & p. C5C22/C25/C26

adjustable motor platform(M1 - M2 - M3 - M4) p. B35

scoop (M5 - M6)

motor base (M7) p. B35

bed plate (M10 - M12) p. B35

2. SHAFTS :

mm mm catal.

hollow LSS : bronze bushing

3. OTHER :

anti-humidity breather plug

dust-proof breather plug p. C15/C35

drain cock with hose coupling p. C15/C35

grease-purged labyrinth at LSS

double oil seal at LSS

galvanized bolts

torque arm

hollow shaft assy / disassy tooling

external locking element

SELECTED TYPE

OPTIONS REFERENCEDATA

REFERENCEDATA

backstop required Y N *

Low speed shaft bearing

design for: radial load Y N

axial load Y N

no extra cooling -

fan *

double fan *

cooling coil (p. A7) p. C15/C35

cooling system (p. A7)

size 1

2

3

4

oil-to-water

oil-to-air

pressure lubrication

REFERENCEDATA

REFERENCEDATA

Q2 3 4 5 - 6 7 8 - 9

Pnom = hp SF =

Pmot = hp Pa = hp quantity

speed (constant) : nHSS = rpm / nLSS = rpm

exact ratio = Red. Mult solid LSS hollow LSS

direction of rotation LSS : CW CCW CW

CW

CW

CW

1

ansen

A5

APPLICATION CLASSIFICATION - SERVICE FACTOR SF

* - selection according to FEM 1.001 specification upon request; Pa = absorbed power - special document for selection of gear units for cranes is available; Pm = nameplate rating of the electric drive motor (or generator) - hoists for transportation of people : refer to us. at the motor (or generator) rated base speed.

- These service factors SF are empirical values based on AGMA and ISO specifications and our experience. They apply for "State of the art" designed driven machines and normal operating conditions. They apply for electric motors as prime movers-if prime motor is a multicylinder combustion motor, 0,25 has to be added to the SF. Refer to us for special designed applications or special operating conditions.

- Other applications not listed : refer to us.

ansen

SF min3h 10h 24h

APPLICATION 24h 24h 24h

on Pa on Pm on Pa on Pm on Pa on PmAgitators / MixersPure liquids 1 1 1.15 1 1.25 1.25Liquids and solids 1.15 1 1.25 1.25 1.6 1.5Liquids variable density 1.15 1 1.25 1.25 1.7 1.5

Cement industryCement kilns 2 1.75Dryers, coolers 1.75 1.5

Clay working machineryBrick press 1.75 2Briquette machine 1.75 2

CompressorsCentrifugal 1.15 1 1.5 1.25 1.5 1.25Lobe 1.15 1 1.5 1.25 1.75 1.25Waterring 1.15 1 1.5 1.25 1.75 1.5Reciprocating, multi-cylinder 1.25 1.75 1.5 1.75 1.5Reciprocating, single-cylinder 1.5 2 1.75 2 1.75

ConveyorsUniformly loaded or fed 1 1 1.15 1 1.25 1.1Heavy duty 1.15 1 1.25 1.1 1.5 1.25Reciprocating, shaking 1.5 1.25 1.75 1.5 2 1.75Apron feeder, belt feeder 1 1 1.25 1.1 1.5 1.25Screw feeder 1 1 1.25 1.1 1.5 1.25

Cranes and hoists *Hoist (non-reversing torque) Light duty 1 1.15 1.3 Medium duty 1.15 1.25 1.45 Heavy duty 1.25 1.45 1.85Travel drive or slewing Peak torque / nom. motor torque 1.5 1.4 1.7 1.9 1.75 1.65 2 2.2 2.0 1.85 2.35 2.5Luffing non-reversing torque 1 1.25 1.45 reversing torque 1.4 1.7 1.9Boom hoist 1.25 1.25 1.5

CrushersStone or ore 1.75 2 2.25

DredgesCable reels 1.25 1.25 1.5Cutter head or bucket chain drives 2 2 2.25Jig drives 2 2 2.25Winches 1.25 1.25 1.5

ElevatorsBucket elevator 1 1 1.25 1.1 1.5 1.25Escalators 1 1.15 1.25Freight elevator 1 1.25 1.5

Energy conversionFrequency converters 1.5 1.5 1.75Water wheels (low speed) 1.5Water turbines 2Wind turbinesWind regime medium 1.75 heavy 2

FansHeat exchangers 1.5 1.5 1.5Dry cooling towers 1.75 1.5 2 1.75Wet cooling towers 1.75 1.5 2 1.75Large fans (mines, industrial) 1.25 1 1.5 1.25 1.75 1.25

Food industryBeet slicers 2Cereal cookers 1 1.15 1.25Crushers 1.75 2 2.25

SF min3h 10h 24h

APPLICATION 24h 24h 24h

on Pa on Pm on Pa on Pm on Pa on PmFood industry (continued)Diffusers extraction 1.4Diffusers rotary 1.75Digesters 1.25Dough mixers 1.25 1.25 1.5Extruders 1.5 1.5 1.5Filling machines 1 1.15 1.25Kernel expellers 1.75 1.5Meat grinders 1.25 1.25 1.5Screw presses 1.25 1.1Sugar cane carriers 1.75 1.5Sugar cane knives 2 1.75Sugar roller mills 2 1.75Toasters, desolventisers Refer to us

Mills (rotary type)Ball, rod 1.5 1.25 1.75 1.5 2 1.75Autogene 1.5 1.25 2 1.5 2 1.75Dryers and coolers 1.5 1.5 1.75 1.5

MiningBucket wheel drives Excavation 2.25 Reclaimer medium duty 1.5 Reclaimer heavy duty 2Disc pelletisers 1.5Rotary screens (stones or gravel) 1 1.25 1.5

Pulp and PaperCalanders 1.5 1.75Chippers 2.5Cutters 2Debarking drums 2Dryers (anti friction bearings) 1.5 1.25Lime kilns 1.75 1.5Presses (felt and suction) 1.75 1.5Pulpers Bales of recycling paper 2.5 Others 2Pumps (vacuum) Centrifugal 1.75 Waterring 1.75 Piston 2Reelers (surface type) 1.5 1.25Rolls (non-reversing) 1.5Winders/Unwinders 1.5 1.25

PumpsCentrifugal 1.15 1 1.15 1 1.5 1.15Proportioning 1.15 1 1.25 1 1.5 1.15Rotary gear type, lobe, vane 1.15 1 1.25 1 1.5 1.15Reciprocating, multi-cylinder 1.25 1.15 1.5 1.25 1.75 1.5Reciprocating, single-cylinder 1.5 1.25 1.75 1.5 2 1.75Screw pumps 1 1.25 1.5

RecyclingCrushers 2Garbage drums 1.5Fluidised bed grate 1.5

Rubber and plasticMixing mills 2Rubber calanders 1.5Extruders rubber 1.5 1.5 1.75 plastic 1.5 1.5 1.5

Water treatmentCommon aerator 1.75 1.5Carrousel aerator 2 1.75Brush aerator 2 1.75Screw pump 1 1.25 1.15 1.5 1.25

A6

STANDARDIZED COOLING PROVISIONS

F

M P

F

It t°

B

t°

Vct1

C

Vct2

Mt1 Mf

M

Vct1 t°

Mt2

t°

1. Standard fan cooling

One or two standard fans are mounted on the high speed shaft. Free air entry at the suction side should be guaranteed.

2. Standard water cooling coil

The extra thermal power rating Ptc+ and the connection dimensions as shown in the catalog apply for a cooling system as indicated hereafter:- a standard cooling coil made from copper alloy CuNi10Fe1Mn complying with DIN 17664 and allowing the use of fresh as well as seawater.

(Maximum permissible water pressure: 116 psi)- difference between oil bath and cooling water temperature is 140°F- waterflow ranging between 1.3 and 4.5 gpm; precise specifications are shown on the certified dimensional drawing.- dimensional drawings on page C15 for H-type units and page C35 for V-type units

3. Air and water cooling system

When the standard fan cooling is either insufficient, or unsuitable because of the nature of the application or when a standard water cooling coil is not taken into consideration, an air or water cooling system may be recommended.For dimensions, refer to us

3.1. The standard oil-to-air cooling system This system can either be connected to the gear unit or supplied with it as a separate element. (diagram, fig. below)

3.2. The standard oil-to-water cooling system This system can either be connected to the gear unit or supplied with it as a separate element. (diagram, fig. below)

3.3. The standard elements of the cooling systems1) Positive displacement pump P with incorporated pressure relief valve.

Electric motor protection according to TEFC Standard voltage range is either 230V/460V, 60Hz or 575V, 60Hz 2) Oil-to-air cooler B A separately driven fan forces an air stream through the cooler. Standard voltage range is either 230V/460V, 60Hz or 575V, 60Hz 3) Oil-to-water cooler C using fresh water in counter flow. Max. water pressure: 116 psi An oil-to-water cooler C for cooling with seawater can be supplied upon special request.

4) Flow switch Mf controls the oil flow into the gear unit. This switch can trigger an alarm signal when the oil supply is inadequate. In such an event, the gear unit has to be stopped at once and the cause of the interruption of the oil supply has to be removed.

5) Filter F with incorporated pressure relief valve6) Thermostatic valve Vct1 in the oil circuit to by-pass cooler at low temperatures so as to limit oil pressure7) Thermometer It to give actual monitored oil temperature 8) Temperature switch Mt1 at the cooler outlet to indicate a high temperature condition9) Optional devices

The cooling system can be equipped with following standard options- Temperature switch Mt2 monitoring the motor of the air cooler (air cooling system)- Thermostatic valve Vct2 in the water supply circuit (water cooling system) to conserve water- Duplex filter F for continuous operation, with incorporated pressure relief valve and visual and/or electrical contamination indicator- Electrical and/or visual contamination indicator incorporated in the filter

Note: when a cooling system is fitted, the oil level must be checked after a short test run (cooler should be filled with oil)

ansen

A7

DETAILED EXAMPLE OF SELECTION

Conveyor drive Pa = 72 hp, n2 = 35 rpmMechanical power rating• Horizontal low speed shaft• Right-angle shafts required- application: see above- load conditions: heavy duty 16h/24h- prime mover: electric motor SF = 1.5 (page A6)

Pa x SF = 72 x 1.5 = 108 hp• Ratio:

• Size and number of stages :

mechanical power rating P = 110 hp (page B11)check : Pa x SF = 108 hp ≤ P = 110 hpdimensional drawings on page C11

• Right-angle shafts• Machine shaft to the right• Hollow shaft with shrink disc

Please indicate gear unit type on the gear unit specification sheet (p. A5):

n1 1750n2 35

i = = = 50

Second caseOperational parameters:

. ambient temperature = 105°F :correction factor without forced cooling : a = 0.75correction factor with forced cooling : d = 0.75

. operating time 16 h/day & > 4000 h/year : b = 1

. mounted indoors, normal working area : c = 1

- Gear unit without forced cooling: Ptn = 68 hp (p. B16) Check: Pa ≤ ? Ptn x a x b x c 72 hp ≤ ? 68 hp x 0.75 x 1 x 1 = 51 hp : not OK!

Extra cooling is required.

- Cooling fan possible: Ptf = 140 hp (p. B16) Check: Pa ≤ ? Ptf x d x b 72 hp ≤ ? 140 hp x 0.75 x 1 = 105 hp : OK!

Cooling fan solution can be selected. Dimensional drawing on page C11.

- Water available • Cooling coil: P = 115 hp (p. B16) Check: Pa ≤ ? (Ptn x a x c + P ) x b

72 hp ≤ ? (68 x 0.75 x 1 + 115) x 1 = 166 hp : OK! Cooling coil solution can be selected. Description page A7, dimensional drawing page C15.

• Oil-to-water cooler: P = 235, 415, 740, 1000 hp (W1 -> W4, p. A4)

Check: Pa ≤ (Ptn x a x c + P ) x b 72 hp ≤ ? (68 x 0.75 x 1 + 235) x 1 = 286 hp : W1 OK! Oil-to-water cooler solution size 1 can be selected Description and options page A7, dimensional drawing:

refer to us.

- No water available Oil-to-air cooler: P = 175, 330, 520, 885 hp (A1 -> A4, p. A4) Check:

Pa ≤ ? (Ptn x a x c + P x d) x b72 hp ≤ ? (68 x 0.75 x 1 + 175 x 0.75) x 1 = 182 hp : A1 OK!

Oil-to-air cooler solution size 1 can be selected.Description and options page A7, dimensional drawing: refer to us.

3R

2H

1 Q

2 H

3 R

4 D

5 3 - 6

C7 R

8 D - 9

5 0

p. A5

p. A5no extra coolingfan Xdouble fancooling coil

no extra coolingfandouble fancooling coil X

cooling system size 1 X 2 3 4 oil-to-water X oil-to-airpressure lubrication

+tc +

tc

+tw

+tw

p. A5

Thermal power rating (page A4)

First case (refer to page A3)Operational parameters:

. ambient temperature = 85°F :correction factor without forced cooling : a = 0.87

. operating time 16 h/day & > 4000 h/year : b = 1

. mounted outdoors : c = 1.33

- Gear unit without forced cooling: Ptn = 68 hp (p. B16) Check: 72 hp ≤ ? 68 hp x 0.87 x 1 x 1.33 = 79 hp:OK! No extra cooling is required.

p. A5no extra cooling Xfandouble fancooling coil

p. A5

cooling system size 1 X 2 3 4 oil-to-water oil-to-air Xpressure lubrication

+ta

+ta

950

4D53

6C7R8D

ansen

A8

Mechanical power ratings

QGear unit

HHorizontal L.S.S.

PParallel shafts

A QSize Two stages

2 P

Nom.ratio Gear unit size

iN n1 n2 A B C D E F G H J K L M N P Q

1750 2801460 2301160 185870 140

1750 245 *1460 205 *1160 165870 125

1750 220 *1460 185 *1160 145870 110

1750 195 *1460 1601160 130870 97

1750 175 *1460 145 *1160 115870 87

1750 1551460 1301160 105870 78

1750 1401460 1151160 93870 70

1750 1251460 1051160 83870 62

1750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58

870 441750 781460 651160 52

870 391750 701460 581160 46870 35

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

* Pressure lubrication is required. Refer to us

200 304 469 719 1160 1560 2400170 264 413 613 974 1380 2020139 216 339 496 779 1110 1620108 168 256 375 589 841 1230176 286 418 617 970 1450 2120 3630 5870148 241 351 527 814 1210 1780 3200 5180 9720118 192 280 430 652 972 1420 2660 4410 780089 145 212 326 492 735 1080 2010 3390 5910

162 257 408 589 948 1290 1900 2410 3330 5430138 220 345 502 795 1120 1600 2120 2790 4790 10080113 180 275 402 636 907 1280 1700 2230 3880 8090

88 138 208 303 480 685 967 1290 1690 2940 6130141 232 339 507 793 1180 1680 3150 3630 5100 5870118 194 284 432 665 991 1410 2680 3200 4490 5180 7590

94 156 228 350 531 793 1130 2150 2640 3630 4410 607071 117 172 264 401 599 850 1620 2000 2750 3540 4600

134 211 327 475 744 1040 1530 2000 2700 4670 5420115 180 274 401 624 884 1280 1680 2270 3920 4760 7860 9780

94 146 219 320 499 707 1020 1340 1810 3140 3820 6290 783072 110 165 241 377 534 772 1020 1370 2370 2900 4760 5940

114 185 271 409 622 921 1340 2550 3150 4300 510095 156 227 349 522 772 1120 2150 2670 3620 4490 628076 124 181 279 417 617 898 1720 2130 2900 3800 503057 93 137 211 314 467 679 1300 1620 2190 2870 3800

110 173 256 381 602 842 1270 1600 2150 3730 461094 145 215 319 504 705 1060 1340 1810 3120 3880 6500 762077 116 172 255 402 565 850 1070 1450 2510 3100 5200 610058 87 129 192 304 425 642 811 1090 1890 2350 3940 461092 148 212 330 503 736 1120 1980 2530 3350 437077 124 177 276 421 617 935 1660 2130 2820 3780 483061 99 142 221 337 493 747 1330 1700 2250 3030 386046 74 107 166 253 371 565 1010 1290 1700 2290 292088 138 208 296 468 687 1000 1330 1680 2910 367075 116 174 248 393 575 841 1120 1410 2440 3080 5000 630060 92 138 198 314 460 672 893 1120 1940 2470 4000 504045 69 105 149 236 346 507 675 848 1480 1860 3030 382071 117 172 257 392 601 881 1620 1970 2680 351060 98 143 215 327 503 739 1370 1660 2240 2950 400048 78 115 172 261 401 590 1090 1330 1800 2360 319036 59 86 129 197 303 445 822 1000 1350 1780 241072 112 162 244 377 551 787 1050 1370 2320 287061 94 135 204 315 463 660 882 1150 1940 2400 4130 484048 75 109 162 252 369 527 705 917 1560 1920 3310 388036 56 82 123 190 278 397 532 692 1170 1450 2490 294058 95 134 212 315 483 692 1320 1620 2160 280048 80 113 177 264 404 579 1110 1350 1810 235038 64 90 141 211 322 463 886 1080 1450 188029 48 68 106 158 243 349 669 818 1090 1420

827 1110 1860 2280693 935 1570 1920 4010554 746 1250 1530 3200417 563 941 1160 2430

Nom.speedrpm

ansen

B1

hp

Ratio available only for gear unit with solid low speed shaft

Torque ratings at low speed shaft

QGear unit

HHorizontal L.S.S.

PParallel shafts

A QSize Two stages

2 T


iN n1 n2 A B C D E F G H J K L M N P Q

1750 2801460 2301160 185870 140

1750 245 *1460 205 *1160 165870 125

1750 220 *1460 185 *1160 145870 110

1750 195 *1460 1601160 130870 97

1750 175 *1460 145 *1160 115870 87

1750 1551460 1301160 105870 78

1750 1401460 1151160 93

870 701750 1251460 1051160 83870 62

1750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58

870 441750 781460 651160 52

870 391750 701460 581160 46

870 35

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

1000 lbf.in

46 69 105 166 258 362 55947 72 111 170 260 386 56648 74 115 173 262 391 57050 77 116 175 264 394 57646 73 108 161 249 366 543 918 148047 74 109 165 250 368 548 970 1570 291047 74 109 170 252 370 550 1010 1680 294047 74 110 171 254 373 557 1020 1720 297047 73 114 169 260 371 568 710 924 153048 75 115 172 262 385 570 747 929 1610 347049 77 116 174 263 393 575 755 933 1640 350051 79 116 175 265 396 580 764 945 1660 354047 73 109 164 250 368 550 989 1140 1600 184047 74 109 168 252 370 554 1010 1200 1690 1940 294047 74 110 171 253 372 557 1020 1250 1720 2080 296047 75 111 172 255 376 561 1020 1260 1730 2230 299048 75 115 172 262 387 574 751 930 1630 191049 77 115 174 264 394 576 755 938 1640 2010 3510 419051 79 116 175 265 396 579 761 943 1650 2030 3530 423052 79 117 176 267 399 583 769 950 1670 2050 3560 428047 74 110 167 252 371 553 1010 1230 1700 198047 74 110 171 254 373 556 1020 1240 1720 2090 296047 75 110 172 255 375 560 1030 1250 1730 2230 299047 75 111 173 256 378 564 1030 1270 1740 2240 301049 78 116 175 264 394 575 756 935 1640 202050 78 116 175 265 396 579 761 946 1650 2030 3530 423052 79 117 176 266 399 582 767 952 1670 2040 3560 427052 79 117 177 269 400 586 773 957 1680 2060 3600 430047 74 110 171 254 373 557 1020 1240 1720 215047 75 110 172 255 375 559 1020 1250 1730 2230 299047 75 111 173 256 378 562 1030 1260 1740 2240 301048 75 111 173 257 379 567 1040 1270 1760 2260 304051 79 116 176 265 397 580 763 946 1660 203052 79 117 176 267 398 582 767 953 1670 2040 3560 427052 79 117 178 268 401 586 771 956 1670 2060 3580 430052 79 118 178 269 402 589 776 962 1690 2070 3620 434047 75 111 173 255 376 560 1020 1250 1740 223047 75 111 172 256 377 563 1030 1270 1740 2250 301048 75 111 174 257 378 566 1040 1270 1760 2260 303048 76 112 174 259 381 570 1040 1280 1770 2280 305052 79 117 176 267 398 583 768 949 1670 205052 79 117 177 268 401 586 771 955 1680 2060 3580 430052 79 118 177 269 402 589 776 960 1690 2070 3610 433053 80 118 178 271 403 591 781 966 1700 2080 3630 438048 75 111 173 257 378 564 1030 1270 1750 225048 75 111 173 258 379 566 1040 1270 1760 226048 75 112 174 259 380 569 1040 1280 1770 228048 76 112 175 259 382 572 1050 1290 1780 2300

773 955 1680 2060777 960 1690 2080 4330781 964 1700 2080 4360784 971 1710 2100 4400

Nom.speedrpm


ansen

Ratio available only for gear unit with solid low speed shaft

B2

QGear unit

HHorizontal L.S.S.

PParallel shafts

C TSize Three stages

3


P


iN n1 n2 C D E F G H J K L M N P Q R S T

1750 88 *1460 731160 58

870 441750 78 * *1460 65 *1160 52

870 391750 70 * *1460 58 *1160 46

870 351750 63 * * *1460 52 *1160 41

870 311750 56 * * *1460 461160 37

870 27.51750 49 *1460 411160 33

870 24.51750 441460 371160 29

870 221750 391460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.8

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

112

hp

188 287 406 634 919 3850160 243 346 531 770 3290127 193 283 424 614 2680 436096 146 220 319 464 2080 3380

166 252 355 563 801 1370 1740 3540 4020139 215 303 471 670 1140 1500 3020 3540 4850111 174 247 375 535 913 1220 2470 2940 3970 434083 130 192 283 404 689 917 1920 2210 3080 3380

152 235 335 514 750 952 1260 1650 2120 2530 3150 3770 5110127 196 286 429 628 811 1060 1410 1780 2230 2680 3260 4360 4840101 157 233 343 500 650 845 1130 1420 1850 2200 2600 3570 3960 4990

76 117 178 259 377 491 637 849 1070 1390 1720 1970 2760 3070 3800132 208 294 455 653 848 1110 1430 1930 2410 2900 3420 4010 4650 5100110 176 251 381 547 709 932 1210 1620 2110 2470 2940 3540 3970 4340 5480

88 139 204 304 436 567 744 966 1290 1690 2010 2350 2840 3250 3550 451066 105 156 229 329 428 561 728 976 1270 1560 1770 2150 2520 2760 3410

123 186 274 409 586 793 1030 1330 1660 2120 2600 3110 3770 4220 4640 5710103 156 233 342 491 664 861 1120 1390 1840 2210 2610 3250 3610 3960 5000

82 124 188 272 392 530 688 893 1120 1460 1810 2090 2590 2940 3230 401062 93 141 205 295 400 518 673 842 1110 1380 1580 1960 2330 2530 3030

107 168 239 362 511 691 865 1170 1520 2000 2390 2840 3390 3850 4210 531089 139 204 303 428 578 724 984 1270 1680 2040 2370 2840 3290 3590 451071 111 164 241 341 461 578 786 1020 1340 1680 1900 2280 2680 2940 361054 83 123 182 257 347 436 593 766 1010 1260 1430 1720 2110 2350 274099 148 220 325 473 621 799 1090 1330 1720 2120 2520 3100 3450 3840 484083 123 184 271 397 519 669 911 1120 1450 1810 2120 2600 2940 3270 406066 98 146 216 316 414 534 727 890 1150 1460 1690 2080 2410 2670 325050 73 110 162 237 312 402 547 670 870 1100 1280 1570 1860 2170 245086 132 192 287 413 540 691 913 1210 1570 1940 2270 2750 3140 3430 436072 110 161 240 345 453 578 764 1020 1320 1660 1890 2310 2670 2920 366057 88 128 192 275 361 460 610 810 1050 1330 1520 1840 2230 2440 292043 66 96 145 208 272 347 460 610 791 1000 1140 1390 1680 1920 221077 117 178 252 367 502 638 845 1110 1380 1690 2010 2510 2740 3120 386064 98 149 211 308 420 534 707 927 1150 1420 1690 2110 2370 2670 325051 78 119 168 245 334 426 565 739 920 1130 1350 1680 1920 2270 259038 58 89 126 185 252 320 425 557 693 853 1020 1260 1450 1730 194067 105 156 223 320 437 562 730 1010 1250 1540 1760 2190 2490 2740 347056 88 130 186 268 365 469 610 843 1050 1290 1480 1840 2160 2390 292045 70 103 149 213 291 374 487 673 837 1030 1170 1460 1730 1970 233034 52 78 112 161 220 282 366 507 632 776 884 1100 1300 1490 176052 77 122 174 295 389 519 675 873 1140 1380 1570 2000 2280 2520 300044 64 102 145 247 326 434 565 731 957 1160 1310 1680 1900 2230 251035 51 81 116 197 260 346 449 582 764 924 1050 1330 1530 1780 201026 38 61 87 149 196 260 339 439 575 696 794 1010 1150 1340 152043 67 102 152 257 339 451 593 794 1040 1260 1430 1700 2050 2310 271036 56 85 127 215 283 377 496 665 872 1060 1200 1420 1720 1970 227029 44 68 101 172 227 300 396 530 695 841 957 1140 1370 1570 181022 33 51 76 129 170 227 298 398 523 633 721 857 1030 1180 137042 62 95 143 204 312 417 548 605 901 1130 1280 1560 1840 2120 239035 52 80 120 170 261 349 459 506 755 941 1070 1300 1530 1770 200028 41 63 95 135 208 278 366 404 602 751 858 1040 1220 1410 160021 31 48 72 102 157 209 275 303 453 565 648 779 921 1070 120035 54 79 122 180 272 341 476 548 821 1020 1170 1390 1650 1890 215029 45 66 102 150 228 284 398 459 687 857 975 1160 1380 1580 180023 36 53 81 119 181 227 318 365 547 683 778 928 1100 1260 143017.5 27 40 61 90 137 170 239 275 412 515 586 699 829 951 108033 51 76 115 160 287 440 473 1040 1270 1700 192027 43 64 96 134 240 367 396 874 1060 1420 161022 34 51 76 106 190 294 315 699 845 1140 128016.5 26 38 57 80 143 221 237 527 636 856 96627 44 64 100 141 276 440 1130 173023 37 53 84 117 231 367 945 145018 30 42 67 93 184 294 754 115013.5 22 32 50 70 138 220 567 869


Nom.speedrpm

ansen

B3


QGear unit

HHorizontal L.S.S.

PParallel shafts


3 T



1750 88 *1460 731160 58

870 441750 78 * *1460 65 *1160 52

870 391750 70 * *1460 58 *1160 46

870 351750 63 * * *1460 52 *1160 41

870 311750 56 * * *1460 461160 37

870 27.51750 49 *1460 411160 33

870 24.51750 441460 371160 29

870 221750 391460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.8

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

112

1000 lbf.in

134 204 284 457 650 2730136 207 290 459 653 2800136 207 299 461 656 2870 4710137 209 309 462 661 2970 4870136 200 286 459 652 1140 1430 2770 3290137 204 292 459 655 1150 1480 2820 3470 4630137 209 299 461 657 1150 1510 2910 3620 4770 5350137 208 310 463 661 1160 1520 3010 3640 4940 5550136 207 291 459 654 861 1140 1470 1940 2300 2810 3390 4600136 207 297 460 656 880 1150 1500 1960 2420 2870 3510 4700 5270137 209 306 463 658 887 1150 1510 1970 2540 2960 3530 4840 5420 6900137 208 312 466 661 893 1160 1520 1980 2550 3080 3560 5000 5610 7000136 205 293 460 656 882 1150 1490 1950 2410 2840 3510 4080 4660 5230137 207 300 462 658 885 1150 1510 1960 2520 2900 3620 4320 4760 5340 6710137 207 307 464 660 891 1160 1520 1970 2550 2980 3640 4370 4900 5500 6930138 208 312 466 663 895 1160 1530 1980 2550 3070 3660 4390 5080 5700 6990137 207 300 462 656 883 1150 1510 1950 2440 2880 3520 4220 4720 5300 6580137 208 307 463 659 887 1150 1510 1960 2530 2940 3540 4360 4830 5410 6910137 208 311 464 662 891 1160 1520 1980 2540 3030 3570 4370 4950 5570 6970138 208 311 466 665 896 1160 1530 1990 2560 3080 3600 4410 5250 5820 7030137 209 301 462 658 886 1150 1510 1960 2530 2910 3630 4340 4790 5370 6810137 208 308 464 661 889 1160 1520 1970 2540 2980 3630 4360 4900 5490 6930137 208 311 465 662 893 1160 1520 1980 2550 3080 3660 4400 5030 5650 6980138 208 312 468 667 896 1170 1530 1990 2570 3090 3680 4420 5270 6020 7060137 207 310 464 659 889 1160 1510 1970 2530 2970 3540 4360 4860 5440 6930137 208 310 464 663 890 1160 1520 1980 2550 3040 3560 4390 4970 5560 6970138 208 310 466 665 895 1160 1530 1990 2560 3090 3580 4420 5140 5710 7010138 208 313 467 665 899 1170 1530 1990 2580 3100 3620 4440 5290 6200 7070137 208 310 464 662 890 1160 1520 1970 2540 2990 3650 4370 4930 5520 6940137 208 312 465 662 895 1160 1520 1980 2550 3070 3650 4390 5020 5640 6990138 208 312 467 665 896 1170 1530 1990 2570 3090 3680 4410 5270 5920 7020138 208 313 471 670 902 1170 1540 2000 2580 3100 3690 4460 5290 6210 7090137 208 312 466 662 893 1160 1520 1980 2560 3060 3560 4390 5000 5590 6980138 208 312 466 666 895 1160 1530 1980 2560 3090 3590 4410 5200 5730 7030138 208 312 467 667 897 1170 1530 1990 2570 3100 3620 4420 5290 6120 7060139 208 314 470 671 903 1170 1540 2000 2580 3110 3640 4450 5330 6230 7070138 208 312 465 664 895 1160 1530 1980 2560 3080 3670 4390 5070 5700 6980138 208 312 467 666 895 1170 1530 1990 2570 3090 3690 4420 5260 5960 7050138 208 313 469 667 899 1170 1540 2000 2570 3100 3690 4430 5310 6200 7080139 208 314 470 671 906 1170 1540 2000 2590 3120 3710 4460 5320 6240 7100119 180 272 408 664 895 1160 1530 1990 2560 3080 3600 4410 5260 5850 7030119 180 273 407 666 899 1170 1530 1990 2570 3100 3620 4440 5270 6190 7040120 180 274 409 669 903 1170 1540 2000 2580 3110 3640 4440 5330 6240 7100120 181 275 411 674 906 1170 1550 2010 2590 3120 3670 4470 5330 6260 7140113 176 261 384 667 898 1170 1530 1990 2560 3090 3680 4430 5270 6070 7060113 176 262 386 666 898 1170 1540 2000 2570 3100 3690 4430 5290 6220 7080114 177 263 387 670 905 1170 1540 2000 2580 3110 3710 4460 5300 6230 7110113 178 263 389 672 907 1180 1550 2010 2590 3120 3720 4480 5340 6270 7170119 180 273 410 597 898 1170 1530 1720 2570 3100 3620 4450 5300 6210 7060120 180 274 409 598 901 1170 1540 1730 2580 3110 3630 4450 5290 6220 7080120 181 274 410 598 902 1180 1540 1730 2590 3120 3650 4470 5320 6220 7120120 181 275 411 603 907 1180 1550 1740 2600 3130 3680 4480 5350 6280 7150113 177 262 386 579 901 1060 1540 1800 2580 3100 3690 4460 5290 6220 7060113 177 263 387 580 904 1060 1540 1800 2580 3110 3700 4450 5310 6240 7090114 177 263 388 581 904 1060 1550 1810 2590 3120 3720 4470 5330 6260 7120114 178 264 389 582 910 1070 1550 1810 2600 3140 3730 4490 5350 6290 7160120 180 274 410 599 983 1540 1730 3640 4450 6230 7080120 181 275 411 601 986 1540 1730 3650 4470 6240 7130120 181 275 411 603 985 1550 1740 3670 4480 6270 7150120 182 276 412 604 989 1560 1740 3700 4500 6300 7180113 177 263 388 582 1060 1800 4460 7110114 177 264 388 581 1060 1810 4470 7140114 177 264 389 582 1070 1820 4490 7150114 178 264 390 584 1070 1810 4500 7190


Nom.speedrpm

ansen

B4


QGear unit

HHorizontal L.S.S.

PParallel shafts

D TSize Four stages

4 P


iN n1 n2 D E F G H J K L M N P Q R S T1750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3

870 71750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3

870 5.41750 9.71460 8.11160 6.4

870 4.81750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7

870 2.81750 4.91460 4.11160 3.3

870 2.51750 4.41460 3.71160 2.9

870 2.21750 3.91460 3.21160 2.6

870 1.91750 3.51460 2.91160 2.3

870 1.751750 3.11460 2.61160 2.05

870 1.551750 2.81460 2.31160 1.85

870 1.4

hp

58 88 129 189 256 323 582 739 853 142048 74 108 158 213 271 487 618 713 119038 59 86 126 170 216 388 492 569 95229 44 65 95 128 162 292 371 428 71651 77 115 165 223 288 385 507 644 789 884 1280 148043 64 96 138 186 241 322 424 538 660 739 1070 123034 51 76 110 149 192 257 338 429 526 590 857 98226 38 57 82 112 145 193 253 323 396 444 645 73947 71 103 150 200 267 342 449 601 712 817 1160 1320 149039 60 86 126 168 223 286 375 503 595 684 970 1110 125031 47 68 100 133 178 228 299 401 475 544 772 884 99623 36 51 75 100 134 172 225 302 357 410 581 665 75042 62 91 131 174 229 306 409 524 648 738 857 1020 1190 134035 52 76 109 146 192 255 342 439 542 617 716 853 999 113028 41 60 87 116 153 204 272 349 432 492 571 680 797 89721 31 45 65 87 115 153 205 263 325 370 430 511 599 67531 58 82 117 160 212 282 351 464 552 662 793 902 1050 121026 48 68 98 133 177 236 294 388 463 555 662 755 880 102020 38 54 78 106 141 188 233 308 367 443 528 602 701 80915.5 29 41 59 80 106 141 176 232 276 334 397 452 528 60927 50 72 102 138 182 243 319 422 503 573 715 813 932 107022 42 60 85 116 152 202 267 353 420 479 598 680 779 89317.5 33 48 68 92 121 161 212 282 335 381 476 542 621 71213.5 25 36 51 69 91 121 160 212 252 287 358 408 467 53525 45 65 95 124 168 224 283 362 440 515 650 750 838 96721 37 54 79 104 141 188 236 303 367 432 544 626 701 80916.5 30 43 63 83 112 149 188 241 292 343 433 499 558 64412.5 22 32 47 62 84 112 141 181 220 259 326 375 420 48421 39 57 82 108 141 192 257 330 401 456 555 675 772 88118 32 48 69 90 118 161 215 276 335 381 464 563 646 73614 26 38 55 72 94 128 172 220 267 303 369 449 515 58710.5 19.5 29 41 54 70 96 129 165 200 228 278 338 388 44120 36 53 74 100 130 177 219 292 358 410 504 590 696 80217 30 44 62 84 109 149 184 244 299 343 422 492 582 67013.5 24 35 49 67 87 118 146 194 237 274 337 393 463 53410 18 26 37 50 65 89 110 146 178 207 252 295 349 40117.5 31 47 64 87 116 149 200 266 326 370 441 531 609 70515 26 39 54 73 97 124 166 223 272 310 369 444 508 59011.5 21 31 43 58 77 99 133 177 216 247 294 353 405 469

8.8 15.5 23 32 44 58 74 100 133 162 185 221 266 304 35415.5 24 36 59 78 107 138 176 227 287 334 402 461 547 63213 20 30 49 65 89 115 148 189 240 280 337 385 457 52710.5 16 24 39 52 71 91 117 150 190 223 268 307 365 420

7.8 12 18 30 39 53 69 88 113 143 168 201 231 274 31613.5 20 32 52 68 93 122 160 207 260 296 359 414 476 55511.5 17 26 43 57 78 102 134 172 217 248 300 347 397 464

9.1 13.5 21 34 45 62 81 106 137 173 197 239 276 316 3706.8 10 16 26 34 46 61 80 103 130 149 180 208 237 278

12.5 19 30 41 63 86 113 121 181 232 268 327 370 428 48310.5 16 25 34 52 72 94 102 152 194 224 274 310 358 404

8.4 12.5 19.5 27 42 57 75 81 121 154 178 217 245 284 3226.3 9.5 15 20 31 43 56 61 91 116 134 164 185 215 241

11 16 25 36 55 70 98 110 165 212 241 287 333 382 4349.1 13 21 30 46 58 82 92 138 177 201 240 278 319 3637.3 10.5 17 24 36 47 65 73 110 141 160 192 221 253 2905.5 7.9 12.5 18 27 35 49 55 83 106 120 143 166 190 217

15.5 24 32 43 57 91 95 120 217 261 343 38812.5 20 27 36 47 76 79 100 182 219 287 32310 16 21 29 38 60 63 80 145 174 228 257

7.6 12 16 21 28 45 47 60 109 131 172 19312.5 21 28 48 70 88 115 233 34910.5 17.5 23 40 58 74 96 194 291

8.4 14 18.5 32 46 59 77 156 2326.3 10.5 14 24 35 44 58 117 174

34 76 94 21228 64 78 17722 51 62 14117 38 47 106

Nom.speedrpm

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

560

630

ansen

B5


QGear unit

HHorizontal L.S.S.

PParallel shafts

D TSize Four stages

4 T


iN n1 n2 D E F G H J K L M N P Q R S T1750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3

870 71750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3

870 5.41750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7

870 2.81750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

1750 3.11460 2.61160 2.05870 1.55

1750 2.81460 2.31160 1.85870 1.4

1000 lbf.in

208 314 470 669 903 1170 2000 2580 3110 5290208 314 470 671 901 1180 2000 2590 3120 5330208 315 471 672 906 1180 2010 2590 3130 5350208 316 473 673 908 1180 2020 2610 3140 5360208 314 470 671 902 1170 1540 2000 2590 3110 3710 5320 6260208 315 471 673 905 1180 1540 2010 2590 3120 3720 5330 6270208 315 472 673 910 1180 1550 2010 2600 3130 3740 5360 6290208 315 472 675 909 1190 1550 2010 2610 3140 3750 5380 6310208 314 471 670 903 1180 1550 2010 2590 3120 3710 5330 6260 7100208 315 471 672 908 1180 1550 2010 2600 3130 3730 5350 6280 7140208 315 473 674 909 1190 1550 2020 2610 3140 3730 5360 6300 7170207 316 473 676 910 1180 1560 2030 2610 3140 3750 5370 6320 7190208 315 471 671 906 1180 1550 2010 2600 3120 3720 4480 5340 6270 7120208 315 472 673 911 1180 1550 2020 2600 3130 3730 4490 5350 6280 7160208 315 472 674 910 1180 1560 2020 2610 3140 3740 4510 5370 6300 7180208 317 473 676 911 1190 1560 2030 2620 3150 3750 4530 5380 6330 7200181 315 472 672 910 1180 1550 2020 2600 3130 3680 4490 5350 6280 7150181 315 472 673 909 1180 1550 2020 2600 3140 3690 4500 5360 6290 7170181 316 473 675 910 1180 1550 2020 2610 3140 3700 4510 5380 6310 7190181 316 474 676 912 1190 1550 2030 2620 3150 3730 4520 5380 6340 7220178 315 472 673 906 1190 1550 2020 2610 3130 3730 4490 5360 6300 7160178 316 473 674 909 1180 1550 2020 2610 3140 3740 4500 5370 6310 7180178 316 474 675 912 1190 1550 2020 2620 3150 3750 4510 5390 6330 7200179 318 475 678 913 1190 1560 2030 2630 3160 3760 4520 5400 6340 7210181 315 473 674 909 1180 1550 2020 2610 3140 3690 4500 5370 6300 7170182 317 473 674 910 1190 1560 2020 2610 3140 3710 4510 5370 6320 7190183 317 474 676 913 1190 1560 2020 2620 3150 3720 4520 5390 6330 7210182 317 474 677 915 1190 1560 2020 2620 3160 3730 4530 5410 6350 7230178 316 473 675 911 1180 1550 2020 2610 3150 3740 4510 5370 6300 7180179 317 473 676 911 1190 1560 2020 2620 3150 3750 4520 5380 6320 7190178 316 474 677 914 1190 1560 2030 2630 3160 3750 4520 5400 6340 7220179 316 476 677 916 1190 1560 2030 2630 3150 3760 4540 5410 6360 7230182 316 474 676 911 1190 1550 2020 2620 3150 3710 4510 5380 6320 7190183 316 474 676 913 1190 1560 2030 2620 3150 3720 4530 5380 6340 7210183 317 474 678 913 1190 1560 2040 2630 3150 3730 4540 5410 6340 7220182 318 476 679 917 1190 1570 2030 2630 3160 3750 4530 5410 6370 7230178 316 474 676 913 1190 1560 2030 2620 3150 3750 4510 5390 6330 7190179 317 475 677 912 1190 1560 2020 2630 3160 3760 4520 5400 6340 7210179 317 474 678 916 1190 1560 2030 2630 3150 3770 4530 5400 6350 7220179 318 475 680 916 1190 1570 2040 2630 3160 3770 4550 5420 6370 7260182 277 413 676 913 1190 1570 2030 2620 3160 3720 4530 5390 6330 7220182 277 415 676 915 1190 1560 2040 2620 3170 3740 4540 5390 6340 7220183 278 416 678 915 1190 1560 2030 2620 3160 3740 4550 5420 6370 7230183 278 416 680 915 1190 1570 2040 2630 3180 3760 4550 5420 6370 7270179 266 391 677 914 1190 1560 2020 2630 3150 3750 4530 5390 6350 7220179 266 392 677 914 1190 1560 2030 2620 3150 3770 4540 5410 6340 7230179 267 393 679 917 1190 1570 2040 2630 3160 3770 4540 5420 6360 7260179 266 394 679 919 1190 1570 2040 2640 3170 3790 4560 5440 6360 7260182 277 414 607 914 1190 1560 1750 2620 3150 3740 4540 5410 6340 7230182 278 414 608 916 1190 1560 1760 2630 3170 3740 4550 5420 6370 7240183 278 414 609 917 1190 1570 1760 2640 3160 3750 4550 5410 6360 7270183 278 417 608 920 1190 1570 1760 2640 3180 3760 4570 5440 6400 7270179 265 392 587 915 1080 1560 1830 2620 3170 3780 4530 5400 6360 7240179 266 393 588 916 1080 1570 1830 2630 3170 3770 4540 5410 6370 7260179 266 394 588 919 1080 1570 1840 2640 3180 3770 4570 5420 6370 7280179 267 393 590 918 1080 1570 1840 2640 3180 3790 4560 5440 6380 7280

278 416 609 806 1080 1570 1760 2170 3740 4540 6360 7250278 414 608 806 1080 1570 1760 2170 3760 4550 6370 7250278 416 608 807 1080 1570 1760 2170 3760 4570 6370 7260278 416 610 808 1080 1570 1770 2180 3770 4570 6400 7260266 392 586 999 1330 1830 2370 4550 7260266 394 589 999 1330 1840 2380 4540 7260266 393 588 999 1330 1840 2380 4570 7280267 394 587 999 1330 1840 2380 4570 7300

807 1760 2170 4540806 1760 2180 4550806 1760 2180 4560809 1760 2180 4580

Nom.speedrpm

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

560

630

ansen

B6

Thermal power ratings

QGear unit

HHorizontal L.S.S.

PParallel shafts

A QSize Two stages

2

hp

Nom.ratio rpm Gear unit size

iN n1 A B C D E F G H J K L M N P Q

-1750 1

2-

1460 12-

1160 12-

870 12

-1750 1

2-

1460 12-

1160 12-

870 12

-1750 1

2-

1460 12-

1160 12-

870 12

Number of fans. Correction factors - see p. A4

Additional thermal power with cooling coil - see p. A4To be applied only if basic thermal power ratings are listed

P+tc

6.3

9

10

14

16

25

70 86 105 135 130 165125 160 220 290 400 530 760 760 940 840180 230 330 430 620 810 1250 1300 1700 1700 2100

70 87 110 145 160 210 210120 160 220 290 410 530 800 830 1050 1050 1300170 220 310 410 610 800 1250 1350 1700 1800 2300 220068 87 110 150 180 240 290 290 340 310

105 140 200 260 370 490 740 790 1000 1050 1350 1250145 190 270 360 530 700 1100 1200 1600 1600 2200 2200 2400

64 84 110 145 190 250 330 350 450 460 580 51092 120 170 220 320 430 650 710 940 970 1300 1300

120 155 220 300 450 580 920 1000 1350 1400 1900 2000 2200 2300100 120 140 300 350 530 590 600 980 1050 1550 130062 78 97 125 150 200 220 200

110 140 190 250 360 480 730 820 1000 1000 1300 940150 190 270 360 540 710 1150 1300 1600 1700 2200 2100

60 78 98 130 160 210 270 280 310 280 310105 135 190 240 360 470 730 830 1050 1100 1400 1300140 180 260 340 520 690 1100 1300 1600 1700 2200 2300 2400 2500

57 75 96 130 160 220 290 330 400 410 510 35089 120 165 220 320 420 650 760 950 1000 1300 1350 1400

120 160 220 300 450 590 950 1100 1400 1500 2000 2100 2300 2500 230053 70 92 125 160 220 300 350 440 470 610 61075 100 140 190 270 360 560 660 830 900 1200 1300 1350 145097 130 180 250 370 490 790 930 1150 1300 1700 1900 2000 2300 230080 97 110 240 280 420 470 480 780 840 1200 105048 65 81 110 130 180 230 260 300 310 350 23082 110 155 210 290 400 630 710 890 970 1200 1300

110 155 220 290 430 580 950 1100 1350 1500 1900 210046 63 80 110 135 180 250 280 340 370 450 42077 105 150 200 280 390 610 700 880 970 1200 1350 1400 1400 1350

105 145 200 280 410 560 910 1050 1300 1450 1800 2100 2300 2400 250044 60 77 105 135 180 250 290 370 410 510 54067 94 130 175 250 340 540 620 780 870 1100 1250 1350 1400 140089 125 170 240 350 480 780 890 1100 1250 1600 1800 2100 2200 230040 56 72 99 130 180 250 290 370 410 530 60057 79 110 150 210 290 460 530 670 750 960 1100 1250 1300 140072 100 140 190 290 390 640 730 930 1050 1300 1550 1800 1900 2000

80 97 110 240 280 420 470 480 780 840 1200 1050P+tc

P+tc

P+tc

ansen

B7

Pt


QGear unit

HHorizontal L.S.S.

PParallel shafts

C TSize 3 / 4 stages

3 / 4 Pt

hpNom.ratio rpm Gear unit size 3 stages

iN n1 C D E F G H J K L M N P Q R S T-

1750 12-

1460 12-

1160 12-

870 12

-1750 1

2-

1460 12-

1160 12-

870 12

-1750 1

2-

1460 12-

1160 12-

870 12

76 97 130 160 230 260 310 290 420 390140 180 240 340 490 540 660 690 1050 1100 1300 1300 1250190 240 320 490 690 760 930 1000 1550 1700 2000 2100 2100 2400 2500 2500

74 95 130 170 240 260 320 330 460 460130 170 230 330 470 520 640 690 1050 1100 1350 1400 1400 1600 1600175 230 310 460 660 730 900 980 1500 1600 2000 2100 2200 2600 2600 2700

70 91 125 165 240 260 330 350 470 500115 150 200 290 420 460 570 630 930 1000 1250 1300 1300 1600 1600 1600150 195 260 400 560 630 780 860 1300 1400 1800 1900 1900 2300 2400 2500

65 85 115 160 230 260 320 350 460 510 610 640 660 78096 125 170 250 360 400 500 550 800 880 1100 1150 1200 1500 1500 1600

120 160 220 330 470 520 650 720 1050 1200 1500 1600 1700 2000 2100 220096 145 220 280 310 330 550 560 790 67063 83 110 150 210 240 290 320 430 460

110 145 195 290 410 470 580 650 960 1050 1250 1300 1400 1600 1700 1700150 200 260 400 560 650 800 910 1400 1500 1800 1900 2100 2400 2600 2600

60 80 110 140 210 240 300 330 430 470 540 560105 140 180 270 390 450 550 620 930 1050 1200 1300 1400 1600 1700 1800140 185 250 380 530 620 760 860 1300 1450 1750 1900 2000 2400 2500 2600

56 75 100 140 200 230 290 330 430 480 560 590 630 740 780 79090 120 160 240 340 400 490 550 810 910 1100 1150 1250 1500 1600 1650

120 160 210 320 450 530 650 740 1100 1250 1500 1600 1800 2100 2200 230051 69 94 130 190 220 270 320 410 460 550 590 650 760 810 85075 100 135 200 290 340 420 480 690 780 940 1000 1100 1300 1400 150095 130 170 260 370 440 540 620 920 1050 1250 1350 1500 1700 1900 200084 130 190 240 270 290 480 490 690 59047 67 91 120 165 200 250 290 360 420 480 510 540 630 660 68083 120 160 230 320 380 470 540 770 910 1100 1150 1200 1400 1500 1600

110 160 210 320 430 520 640 740 1100 1300 1500 1600 1750 2100 2200 230045 64 87 115 160 200 240 280 360 430 490 520 560 660 700 72078 110 150 220 300 360 440 510 740 870 1050 1100 1200 1400 1500 1500

105 150 200 300 410 490 600 690 1000 1200 1450 1500 1700 2000 2100 220042 60 82 110 150 190 230 270 350 420 490 520 560 670 710 74066 95 130 190 260 310 390 450 640 770 910 960 1050 1250 1300 135087 125 170 250 350 420 510 590 870 1050 1250 1300 1450 1700 1800 190038 55 74 100 140 170 220 250 330 400 480 500 550 650 690 72055 80 105 160 220 260 330 380 540 650 780 820 900 1050 1100 115071 100 135 200 280 340 420 490 710 860 1050 1100 1200 1400 1500 1550

84 130 190 240 270 290 480 490 690 590P+tc

P+tc

Nom.ratio rpm Gear unit size 4 stages

iN n1 D E F G H J K L M N P Q R S T

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

20

31.5

35.5

56

63

112

100

160

180

315



P+tc

355

630

53 70 97 140 160 200 220 290 310 380 400 420 490 520 54050 67 93 135 155 190 220 290 320 390 410 430 510 540 56047 62 87 130 150 190 210 280 310 380 400 420 510 550 57043 57 80 120 135 170 190 260 290 360 380 400 500 530 56093 139 177 197 210 351 356 505 42745 55 78 110 130 170 190 250 280 340 370 400 470 500 52042 53 74 105 125 160 180 240 270 330 360 400 460 500 52040 49 69 99 115 150 170 230 260 320 340 380 440 480 51037 44 63 90 105 135 160 210 240 290 320 360 410 450 47078 118 150 167 177 297 301 427 36137 45 64 89 100 130 150 190 220 290 300 330 390 420 44035 42 60 84 96 125 140 180 210 280 290 320 380 410 43034 40 56 79 89 115 135 170 200 260 280 300 360 380 41032 38 53 73 82 105 120 160 180 240 250 280 330 360 38073 109 139 155 165 276 280 397 335

P+tc

P+tc

P+tc

Refer to us


P+tc

ansen

P+tc

B8


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

A MSize Two stages

2 P


iN n1 n2 A B C D E F G H J K L M1750 2801460 2301160 185870 140

1750 245 * *1460 205 *1160 165870 125

1750 220 * *1460 185 *1160 145870 110

1750 195 * * *1460 160 *1160 130870 97

1750 175 * *1460 145 *1160 115870 87

1750 155 *1460 1301160 105870 78

1750 140 *1460 1151160 93870 70

1750 1251460 1051160 83870 62

1750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52870 39

1750 701460 581160 46

870 35

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

hp

173 278 449 717 925 1320 2390145 232 374 611 815 1170 2050115 185 298 489 693 984 1640

86 138 224 367 527 739 1240173 270 408 640 925 1320 2150 3410 5500145 232 349 536 815 1170 1800 3000 4840115 185 279 429 652 978 1450 2550 412086 138 211 325 493 739 1090 1970 3370

153 232 382 585 921 1270 1980 2330 3260 5160130 193 326 493 782 1090 1660 2070 2750 4550106 154 267 394 625 872 1330 1720 2200 386081 115 204 298 472 660 1010 1300 1660 2950

142 220 334 512 779 1140 1740 2840 3410 4590 5500120 188 279 429 653 953 1460 2510 3000 4040 4840

96 153 223 343 522 763 1170 2070 2560 3450 412072 115 169 259 394 577 884 1570 1960 2640 3370

123 190 314 469 744 1030 1530 1980 2590 4240 5160105 162 268 393 629 888 1290 1740 2170 3740 4550

86 133 219 314 503 711 1030 1390 1740 3030 385067 101 166 237 380 536 778 1060 1320 2290 2920

113 181 271 408 626 927 1350 2430 2860 3920 459095 154 228 342 526 776 1130 2110 2510 3450 404076 123 181 272 420 621 904 1690 2050 2840 345057 93 137 205 316 469 683 1270 1560 2160 2680

101 142 237 345 575 760 1200 1610 2120 3620 424086 119 197 288 480 636 999 1350 1770 3080 373069 95 157 229 381 504 794 1080 1420 2470 299051 71 118 172 286 378 597 817 1070 1860 227092 142 215 331 503 739 1090 1960 2430 3300 392077 119 180 278 421 620 913 1640 2090 2790 345061 95 143 221 337 495 730 1300 1680 2210 284046 71 108 166 253 374 551 976 1270 1660 221073 110 166 244 389 544 885 1200 1690 2950 362061 92 138 204 325 453 739 999 1420 2480 303048 73 110 161 257 361 587 794 1130 1980 243036 55 83 121 193 271 440 597 856 1500 184073 110 166 244 389 544 885 1380 1960 2510 330061 92 138 204 325 453 739 1150 1640 2090 279048 73 110 161 257 361 587 912 1300 1660 221036 55 83 121 193 271 440 684 976 1250 1660

885 1330 2390 2910739 1110 2000 2440587 890 1600 1960440 672 1210 1480

25102090166012502350197015801190

Nom.speedrpm


ansen

B9



iN n1 n2 A B C D E F G H J K L M

1750 2801460 2301160 185870 140

1750 245 * *1460 205 *1160 165870 125

1750 220 * *1460 185 *1160 145870 110

1750 195 * * *1460 160 *1160 130870 97

1750 175 * *1460 145 *1160 115870 87

1750 155 *1460 1301160 105870 78

1750 140 *1460 1151160 93

870 701750 1251460 1051160 83

870 621750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52

870 391750 701460 581160 46

870 35

39 63 101 167 206 306 55139 63 101 170 217 324 56739 63 101 172 233 344 56939 63 102 172 236 344 57645 68 106 168 237 332 545 875 138045 70 108 169 250 350 547 925 145045 71 109 170 252 370 555 987 156045 70 110 172 254 373 557 1020 170043 67 108 171 258 380 568 679 921 144044 67 111 173 262 391 571 720 931 152045 67 114 174 264 394 574 754 938 162046 67 116 175 266 397 579 763 945 165046 71 109 169 251 369 549 928 1080 1490 171047 72 109 170 252 370 552 981 1150 1580 180047 74 110 171 253 373 556 1020 1230 1690 193047 75 111 172 255 376 560 1030 1250 1730 210044 69 110 174 260 381 570 717 929 1540 180045 70 113 174 264 393 575 755 935 1630 190047 72 116 175 265 396 579 760 944 1660 203048 73 117 177 267 399 584 768 952 1670 205047 73 109 170 252 371 556 979 1160 1580 185047 74 110 171 253 373 556 1020 1220 1660 195047 75 110 172 255 375 560 1030 1250 1730 210047 75 111 173 256 378 564 1030 1270 1750 218045 64 106 158 252 355 557 757 940 1620 192046 65 105 158 252 355 557 764 942 1660 203046 65 106 158 252 355 557 767 952 1670 205046 65 106 158 252 355 558 773 956 1680 207047 72 110 171 253 373 557 994 1210 1660 196047 72 110 172 254 375 560 996 1250 1690 206047 72 111 173 256 377 563 996 1260 1680 214048 72 111 173 257 380 567 997 1270 1690 222041 63 94 143 217 319 509 702 944 1660 203041 63 94 143 218 318 509 702 952 1670 204041 63 94 142 217 318 509 702 955 1680 206040 63 94 143 217 319 509 704 961 1700 208047 71 109 161 250 345 560 899 1230 1580 206047 71 108 161 250 344 560 895 1230 1580 209047 71 109 160 250 345 560 895 1230 1580 209047 71 109 161 250 345 560 895 1240 1580 2090

642 951 1670 2050642 956 1680 2060643 962 1680 2080642 967 1700 2090

19501950195019502060207020902100

QGear unit

HHorizontal L.S.S.

RRight-angle shafts

A MSize Two stages

2 T

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

1000 lbf.inNom.speedrpm


ansen

B10


QGear unit

HHorizontal L.S.S.

RRight-angle shafts


3 P



1750 881460 731160 58870 44

1750 781460 651160 52870 39

1750 70 * *1460 58 *1160 46

870 351750 63 * * * *1460 52 * *1160 41

870 311750 56 * * * *1460 46 * *1160 37

870 27.51750 49 * * * *1460 41 *1160 33

870 24.51750 44 * * *1460 371160 29

870 221750 39 *1460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.7

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

hp

173 278 404 630 920145 232 345 528 771115 185 282 421 61686 138 219 318 464

169 253 353 559 802 1320142 216 300 468 672 1150113 174 245 374 536 919

85 131 190 282 405 693153 231 330 504 736 925 1270 2150 3110 5150129 193 282 422 617 813 1060 1800 2640 4400103 153 229 337 492 652 850 1430 2160 3590

77 115 174 253 370 491 641 1080 1690 2790134 205 288 447 641 849 1070 1320 1960 2860 3380 4690 5140112 173 247 374 538 711 896 1170 1640 2430 2900 4000 4390

90 137 201 299 429 567 715 971 1310 1980 2310 3270 358067 103 153 225 323 428 539 732 986 1530 1740 2530 2780

122 185 274 401 591 779 990 1320 1730 2210 2510 3060 4090 4680 5500102 154 233 335 495 652 829 1130 1450 1850 2150 2570 3490 4000 4840

81 123 188 267 396 520 661 898 1160 1490 1760 2050 2840 3260 405061 92 142 201 298 392 499 677 876 1120 1330 1560 2250 2560 3060

106 166 240 355 515 679 870 1130 1580 2010 2310 2740 3340 3730 4080 520089 138 204 296 432 569 728 947 1320 1690 1970 2290 2800 3180 3470 455071 110 164 237 345 453 581 755 1060 1350 1610 1820 2240 2590 2840 365053 82 124 178 259 342 439 570 797 1020 1210 1380 1690 2040 2290 275099 142 221 325 473 626 805 1040 1340 1800 2090 2430 3040 3390 3710 463083 119 186 271 397 524 673 876 1120 1500 1780 2040 2550 2900 3160 392066 95 149 216 316 418 538 699 896 1200 1430 1640 2040 2390 2600 312049 71 112 162 239 315 405 527 675 905 1080 1230 1540 1840 2090 236086 132 194 287 413 546 693 919 1220 1640 1920 2230 2660 3080 3380 420072 110 162 240 346 456 579 770 1020 1370 1640 1860 2210 2630 2880 353057 87 129 192 275 365 463 614 815 1090 1310 1490 1770 2190 2410 282043 66 97 145 208 275 349 463 614 823 984 1120 1340 1650 1890 213073 110 166 244 373 502 641 850 1080 1380 1720 1980 2410 2780 3080 380061 92 138 204 312 420 536 712 905 1160 1430 1660 2020 2400 2630 318048 73 110 161 248 335 428 567 721 925 1140 1330 1610 1940 2240 255036 55 83 121 188 252 322 428 543 697 862 1000 1220 1460 1700 192069 104 153 227 325 437 544 732 984 1260 1560 1770 2160 2530 2780 342058 86 128 189 272 366 453 613 823 1060 1310 1490 1810 2200 2430 287046 69 102 150 216 291 361 488 657 842 1040 1190 1430 1760 2010 229035 51 77 113 164 220 271 367 495 634 784 893 1080 1320 1520 173054 76 120 176 257 389 512 677 877 1120 1340 1580 1960 2330 2550 306045 63 100 148 216 325 429 566 734 935 1120 1330 1640 1970 2250 256036 50 80 117 172 257 342 452 586 746 896 1060 1310 1570 1810 204027 38 60 88 129 193 257 341 440 562 675 802 988 1180 1370 154045 66 100 154 227 343 418 544 798 1020 1220 1380 1720 2120 2360 275037 55 84 129 189 287 350 453 668 852 1020 1150 1430 1770 2020 231030 44 67 103 152 229 279 361 532 679 815 912 1150 1410 1620 184022 33 50 77 114 173 211 271 401 511 614 684 865 1060 1220 138042 62 96 141 202 353 542 607 885 1240 1570 2190 247035 52 81 118 169 295 453 508 739 1040 1310 1820 207028 41 64 94 134 235 361 405 587 833 1050 1460 165021 31 48 71 101 177 271 304 440 629 789 1100 124035 54 80 124 177 341 565 825 1350 221029 45 67 103 149 284 472 691 1130 185023 36 54 82 118 227 377 550 900 148017.5 27 40 62 89 170 283 414 677 1110

286 488 1230239 408 1030190 326 819143 245 617

Nom.speedrpm


ansen

B11


QGear unit

HHorizontal L.S.S.

RRight-angle shafts


3 T



1750 881460 731160 58

870 441750 781460 651160 52

870 391750 70 * *1460 58 *1160 46

870 351750 63 * * * *1460 52 * *1160 41

870 311750 56 * * * *1460 46 * *1160 37

870 27.51750 49 * * * *1460 41 *1160 33

870 24.51750 44 * * *1460 371160 29

870 221750 39 *1460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.7

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

1000 lbf.in

121 196 284 457 650121 196 291 459 653121 197 299 461 656121 196 310 463 659135 200 285 458 652 1100137 204 291 460 655 1150137 207 300 463 658 1150137 208 310 464 662 1160135 207 292 460 654 835 1140 1950 2820 4590136 208 299 461 657 879 1150 1960 2870 4700137 207 306 463 660 888 1150 1970 2960 4840137 208 310 465 661 891 1160 1980 3080 5000136 206 293 460 655 882 1150 1370 1960 2850 3530 4660 5220137 208 301 462 659 885 1150 1450 1960 2910 3630 4750 5350137 207 309 465 662 889 1160 1520 1970 2990 3630 4900 5490

138 208 313 467 664 894 1160 1530 1980 3070 3660 5060 5680137 208 299 462 657 884 1150 1480 1950 2520 2890 3510 4750 5300 6280137 208 306 463 659 887 1160 1510 1960 2530 2970 3550 4850 5420 6630137 208 310 464 663 891 1160 1520 1970 2560 3060 3560 4980 5560 6980138 208 313 466 665 894 1170 1530 1990 2560 3090 3600 5260 5830 7030137 209 302 463 658 886 1150 1510 1960 2520 2930 3630 4350 4810 5400 6610137 208 307 463 661 890 1160 1520 1970 2540 3000 3650 4370 4920 5510 6930138 208 310 467 664 893 1160 1520 1980 2560 3080 3650 4400 5040 5680 6990138 208 312 467 665 898 1170 1530 1990 2570 3090 3690 4420 5290 6100 7030137 201 308 463 659 889 1160 1510 1970 2540 2980 3540 4360 4870 5470 6880137 201 311 464 662 892 1160 1520 1980 2540 3050 3570 4370 4980 5590 6980138 202 312 465 664 896 1170 1530 1990 2560 3080 3600 4400 5170 5780 7010138 202 313 466 668 899 1170 1540 1990 2570 3100 3620 4440 5310 6200 7060137 208 311 463 661 891 1160 1520 1970 2540 3010 3650 4390 4930 5530 6940137 208 311 464 664 892 1160 1520 1980 2550 3070 3660 4380 5030 5660 6990138 208 312 467 664 898 1170 1530 1990 2560 3090 3680 4410 5270 5960 7030138 208 313 470 669 903 1170 1540 2000 2580 3100 3690 4450 5300 6230 7090126 198 294 445 662 892 1160 1520 1980 2540 3080 3580 4390 4990 5620 6980126 198 293 445 665 895 1170 1530 1990 2560 3080 3600 4410 5170 5740 7000126 198 294 443 665 899 1170 1530 1990 2570 3100 3610 4420 5270 6150 7070126 198 295 445 671 902 1170 1540 2000 2580 3110 3640 4460 5290 6240 7090138 208 311 467 663 894 1140 1530 1980 2560 3070 3650 4410 5070 5690 7000138 208 312 467 667 898 1140 1530 1990 2560 3090 3680 4430 5270 5960 7040138 208 313 467 666 898 1140 1540 2000 2580 3100 3690 4420 5300 6220 7080138 208 314 470 673 905 1140 1540 2000 2590 3110 3710 4460 5320 6250 7120119 180 273 406 595 883 1170 1530 1980 2560 3080 3590 4400 5230 5810 7040119 180 273 408 598 883 1170 1530 1990 2570 3100 3610 4410 5290 6160 7070119 180 274 409 599 882 1170 1540 2000 2580 3110 3640 4450 5300 6230 7080120 181 275 411 602 882 1180 1550 2000 2590 3120 3660 4470 5330 6280 7140113 176 261 386 577 897 1060 1420 1990 2570 3090 3650 4420 5280 6030 7040113 177 262 386 577 898 1060 1420 1990 2580 3100 3640 4420 5290 6200 7080113 177 263 387 582 904 1060 1420 2000 2590 3110 3640 4460 5290 6250 7100114 177 263 389 581 909 1070 1430 2010 2600 3130 3640 4480 5340 6270 7120119 180 273 407 600 979 1540 1720 2510 3620 4440 6210 7080120 180 274 409 600 982 1540 1730 2510 3640 4450 6210 7100120 181 275 410 599 983 1540 1730 2510 3660 4470 6270 7140120 181 275 412 603 989 1540 1730 2510 3680 4490 6280 7150113 177 262 387 577 1060 1800 2580 4470 7060113 177 263 387 582 1060 1800 2590 4460 7080113 177 263 388 580 1070 1810 2590 4480 7100114 178 264 389 582 1070 1810 2600 4490 7150

979 1730 4450981 1730 4470985 1740 4480990 1750 4500

Nom.speedrpm


ansen

B12


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

D TSize Four stages

4 P


iN n1 n2 D E F G H J K L M N P Q R S T1750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3870 7

1750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3870 5.4

1750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8870 4.4

1750 7.81460 6.51160 5.2870 3.9

1750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7870 2.8

1750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

80

90

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

hp

72 113 157 233 315 398 716 1060 176062 95 134 194 263 333 599 884 154049 75 107 156 209 266 477 704 122037 57 81 117 158 200 359 530 92365 99 142 202 274 355 475 624 976 1090 1640 176055 83 119 169 229 298 397 522 817 915 1370 154044 66 95 135 182 237 316 416 650 730 1090 126033 49 71 102 138 178 237 312 489 550 822 95159 90 127 185 247 329 420 552 740 881 1010 1460 1690 176049 75 106 156 207 275 351 463 620 738 846 1220 1410 154039 60 84 124 164 219 280 369 493 587 675 972 1130 128029 45 64 93 123 165 211 278 371 443 508 732 849 96652 78 113 162 215 283 375 503 645 802 913 1060 1310 1540 172044 65 94 135 180 237 314 421 539 670 763 886 1100 1290 143035 52 75 108 142 189 251 335 429 535 609 707 876 1030 114026 39 56 81 107 142 188 252 323 402 459 532 658 772 86139 71 102 150 197 261 347 441 571 685 819 980 1180 1350 156032 59 85 126 164 219 290 369 477 573 687 819 987 1130 131026 47 68 100 131 174 231 294 381 456 547 653 786 902 104019.5 36 51 75 98 131 174 221 287 343 413 492 591 680 78334 62 90 131 172 225 299 401 519 624 709 885 1060 1220 138028 52 75 110 143 188 251 335 434 522 593 740 888 1020 115022 41 60 87 114 150 200 267 346 416 472 590 708 811 91717 31 45 66 86 113 150 201 260 312 355 444 532 610 69132 57 81 119 160 208 276 354 456 557 637 805 928 1100 126027 48 68 99 133 174 232 296 381 465 534 673 776 916 106021 38 54 79 106 138 184 236 303 370 426 536 618 730 84216 29 41 59 80 104 138 177 228 279 320 404 465 550 63327 50 72 103 138 182 237 322 414 489 575 688 818 957 111023 42 60 86 116 152 198 270 346 409 481 575 684 801 92918.5 33 48 69 92 121 158 215 276 326 384 459 544 638 74214 25 36 52 69 91 119 161 208 245 288 345 409 480 55825 46 64 93 126 168 220 283 366 441 519 625 731 848 97221 38 53 78 105 141 184 236 306 369 434 523 611 708 81316.5 31 43 62 84 112 146 188 243 294 346 417 487 565 64812.5 23 32 47 63 84 110 142 182 221 260 314 366 425 48722 40 57 81 109 143 192 257 333 402 457 558 658 771 86118 34 47 68 91 119 161 215 278 337 382 467 550 645 71914.5 27 38 54 73 95 128 172 221 268 304 371 439 514 57311 20 28 41 55 71 96 129 166 201 229 279 330 386 43020 32 44 75 99 132 177 223 292 353 413 508 593 679 78317 26 37 63 83 110 149 185 244 295 345 425 495 567 65413.5 21 29 50 66 88 118 148 194 235 275 338 394 452 52210 15.5 22 37 49 66 89 111 146 177 207 255 296 339 39217.5 26 38 65 86 114 152 202 266 320 366 444 534 611 68915 22 32 55 72 96 126 169 223 268 306 370 445 511 57711.5 17.5 26 43 57 76 100 134 177 213 243 295 355 408 4598.8 13 19 33 43 57 75 101 133 161 182 223 267 306 345

16 25 36 52 79 106 139 154 229 287 330 404 476 550 63413.5 21 30 43 66 88 117 128 192 239 276 338 397 460 53011 16.5 24 34 53 70 93 102 153 190 220 268 316 366 422

8.1 12.5 18 26 40 53 70 77 115 143 165 202 237 275 31814 21 32 45 69 86 121 139 209 260 296 354 428 491 55812 17 26 38 58 72 101 116 174 217 248 296 358 410 467

9.4 13.5 21 30 46 57 80 93 139 173 197 236 284 326 3717.1 10 16 23 34 43 60 69 104 130 149 177 215 245 279

19.5 29 40 54 73 112 120 152 268 322 441 49816.5 24 34 45 61 93 100 127 224 270 369 41613 19.5 27 36 48 74 80 101 178 215 294 3319.8 14.5 20 27 36 56 60 76 134 161 221 249

16.5 25 36 70 86 112 146 287 44813.5 21 30 58 72 93 122 240 37411 17 24 47 57 74 97 192 2988.2 12.5 17.5 35 43 56 73 143 224

43 59 96 119 26136 49 80 99 21928 39 64 79 17421 29 48 59 131

Nom.speedrpm

ansen

B13


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

D TSize Four stages

4 T



870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3870 7

1750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3870 5.4

1750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7870 2.8

1750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

80

90

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

1000 lbf.in

202 313 456 669 900 1170 1990 3100 5060208 313 467 668 900 1170 2000 3110 5330208 314 470 672 902 1180 2000 3120 5320208 315 472 672 910 1180 2010 3130 5350202 313 467 668 898 1170 1540 2000 3110 3700 5290 5770208 314 470 668 903 1180 1540 2000 3110 3710 5310 6080208 315 471 674 904 1180 1550 2010 3120 3720 5340 6260208 316 472 673 912 1180 1550 2010 3130 3740 5350 6290208 313 469 667 903 1170 1540 2000 2580 3110 3700 5320 6240 6480208 314 470 672 906 1180 1540 2010 2590 3120 3710 5330 6230 6820208 315 471 672 904 1180 1550 2010 2600 3130 3730 5340 6270 7140208 316 473 673 909 1180 1550 2020 2610 3140 3740 5360 6300 7170208 314 470 673 904 1170 1540 2000 2590 3110 3710 4460 5320 6260 7110208 314 471 673 907 1180 1540 2010 2590 3120 3720 4470 5330 6260 7130208 315 472 673 903 1180 1550 2010 2600 3130 3730 4490 5350 6290 7150207 316 473 674 910 1190 1550 2020 2610 3140 3750 4510 5370 6310 7180181 315 470 668 907 1170 1550 2010 2590 3120 3660 4470 5330 6260 7100181 315 472 672 903 1180 1540 2010 2600 3130 3680 4480 5340 6280 7140182 315 472 673 909 1180 1550 2020 2610 3140 3690 4490 5360 6290 7160182 316 474 675 911 1190 1560 2030 2620 3150 3710 4520 5370 6320 7190177 314 471 671 909 1180 1540 2010 2590 3130 3720 4480 5340 6270 7170178 316 472 673 911 1180 1550 2010 2600 3140 3730 4490 5350 6280 7160178 316 472 674 910 1190 1560 2020 2610 3150 3740 4500 5370 6310 7180178 317 473 675 911 1190 1560 2030 2610 3150 3750 4520 5380 6320 7210181 315 471 673 907 1180 1540 2010 2600 3130 3680 4480 5340 6280 7140182 315 472 673 909 1190 1560 2020 2610 3140 3690 4490 5360 6290 7160181 315 474 675 910 1180 1550 2030 2610 3140 3710 4510 5370 6310 7190182 317 475 676 913 1190 1550 2030 2620 3160 3720 4520 5390 6340 7200177 316 472 673 904 1180 1550 2010 2600 3130 3730 4500 5360 6290 7160178 315 473 674 910 1180 1550 2020 2600 3140 3740 4510 5370 6300 7170179 317 473 676 912 1190 1560 2030 2620 3150 3750 4520 5380 6320 7200179 317 475 676 914 1190 1560 2030 2630 3160 3760 4530 5390 6340 7220181 316 473 673 909 1180 1560 2020 2610 3130 3700 4500 5360 6300 7170181 316 473 675 910 1190 1560 2020 2610 3140 3710 4510 5380 6310 7180181 317 474 676 912 1190 1560 2020 2610 3150 3720 4530 5390 6330 7210182 317 475 678 913 1190 1560 2040 2620 3160 3730 4540 5400 6360 7220177 316 473 675 910 1190 1550 2020 2610 3140 3740 4500 5370 6310 7190179 316 474 676 911 1190 1560 2020 2610 3150 3750 4520 5380 6330 7190179 317 475 677 913 1190 1560 2030 2620 3160 3760 4530 5400 6340 7210179 318 476 677 916 1190 1560 2030 2630 3160 3770 4530 5420 6360 7230182 276 413 675 911 1180 1550 2030 2610 3140 3720 4520 5380 6310 7200182 276 414 676 912 1190 1560 2020 2620 3150 3720 4530 5380 6330 7210181 277 415 677 915 1190 1560 2030 2620 3160 3730 4530 5400 6340 7230183 277 414 677 916 1190 1560 2030 2630 3170 3740 4550 5410 6350 7240178 265 391 676 912 1190 1560 2030 2610 3140 3760 4520 5390 6330 7200179 266 391 677 913 1190 1560 2030 2630 3150 3760 4520 5390 6330 7220179 265 392 677 915 1190 1560 2030 2630 3160 3760 4530 5410 6360 7230179 266 391 679 917 1190 1570 2030 2630 3180 3760 4560 5420 6360 7250181 276 414 606 913 1190 1560 1760 2620 3160 3720 4520 5400 6330 7210181 277 415 606 913 1190 1560 1750 2620 3150 3740 4540 5390 6350 7210182 278 414 609 914 1190 1560 1760 2630 3160 3750 4540 5410 6360 7240183 278 416 610 918 1190 1570 1760 2640 3180 3750 4570 5410 6360 7260178 266 392 586 914 1080 1560 1830 2630 3150 3760 4530 5390 6340 7210179 266 392 586 915 1080 1560 1830 2620 3150 3770 4540 5410 6360 7230179 267 393 587 916 1080 1570 1830 2640 3160 3770 4550 5410 6350 7240179 266 394 588 917 1080 1570 1830 2640 3170 3790 4550 5440 6380 7250

277 414 608 804 996 1560 1750 2160 3740 4530 6340 7220278 416 608 805 996 1570 1760 2170 3740 4540 6360 7230278 416 607 807 998 1570 1760 2170 3750 4550 6370 7250278 416 611 805 998 1570 1760 2180 3760 4550 6400 7280265 392 587 1080 1330 1830 2380 4530 7230265 393 587 1080 1330 1830 2370 4540 7240266 391 588 1080 1330 1830 2380 4570 7250267 393 588 1080 1330 1840 2380 4560 7270

805 997 1760 2170 4540807 999 1760 2170 4550808 1000 1760 2170 4570807 1000 1770 2180 4570

Nom.speedrpm

ansen

B14


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

A MSize Two stages

2 Pt

hp


iN n1 A B C D E F G H J K L M

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1


P Additional thermal power with cooling coil - see p. A4To be applied only if basic thermal power ratings are listed

58 68 79 84135 190 250 360 460 710 910 1000 1100 99060 74 92 110 120 150

130 190 240 360 470 710 960 1050 1250 1250 1450 120061 78 99 130 160 200 200 210

110 160 210 320 420 630 880 980 1200 1200 1550 150058 77 100 135 170 230 300 330 360 360 32094 140 180 270 360 530 770 870 1100 1100 1500 155080 97 115 240 280 420 470 480 780 840 1220 105049 59 72 85 99 120

105 150 200 290 380 590 780 920 1050 1100 1300 95049 62 79 98 125 160 150

100 145 190 280 380 570 790 950 1100 1200 1500 145048 63 82 105 140 180 220 250 240 22086 125 165 240 330 500 710 860 1050 1100 1450 150045 60 80 105 140 190 260 310 360 380 450 38071 105 140 200 280 420 600 740 910 1000 1300 150067 80 94 200 230 350 390 400 650 700 1000 86039 48 62 74 97 120 89 9682 115 150 220 310 470 640 740 880 940 1200 125039 49 65 80 110 140 160 180 14077 110 145 210 300 460 640 740 910 970 1300 140038 49 65 83 115 155 200 230 250 270 290 26066 95 125 180 260 390 560 650 820 880 1200 135036 46 62 82 115 160 220 250 310 330 440 47054 78 105 150 220 330 470 550 710 760 1100 1200

67 80 94 200 230 350 390 400 650 700 1000 860

P+tc

P+tc

P+tc

6.3

9

10

14

16

25

ansen

B15

+tc


QGear unit

HHorizontal L.S.S.

RRight-angle shafts


3 / 4 Pt

hp


iN n1 D E F G H J K L M N P Q R S T

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

54 73 99 150 180 210 250 330 310 450 480 500 550 670 69052 70 97 140 170 210 240 320 320 440 470 490 560 660 68049 65 91 135 160 200 230 310 310 430 460 490 560 640 66045 60 83 125 150 190 210 290 290 400 430 450 540 610 64085 127 162 181 192 322 326 463 39143 54 73 110 130 155 180 240 280 340 370 440 490 520 56041 51 70 105 125 150 180 240 270 330 370 430 480 520 56040 48 66 98 120 145 170 230 260 320 350 420 470 510 55036 44 61 89 105 135 160 210 250 300 330 390 440 470 51073 109 139 155 165 276 280 397 33535 43 59 84 95 120 140 190 220 290 300 330 410 440 47034 42 57 81 92 115 135 180 210 280 290 320 400 430 45032 39 54 77 86 110 125 170 200 260 280 310 380 400 43030 36 49 71 80 100 115 160 180 240 260 280 350 370 39064 96 122 136 144 241 245 347 293

80

125


iN n1 C D E F G H J K L M N P Q R S T

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

67 85 110 135 200 220 260 280 250 260145 190 260 370 540 600 860 930 1200 1300 1500 1600 1600 1600

67 86 115 145 210 240 290 310 340 370140 180 250 360 520 580 830 900 1200 1300 1550 1600 1900 1900 2000

64 84 115 150 220 240 300 330 410 440120 160 220 320 460 510 730 790 1050 1150 1400 1500 1800 1900 1900

60 80 110 150 220 250 310 330 440 470 570 60098 130 180 260 380 430 610 660 900 970 1200 1300 1600 1700 180096 150 220 280 310 330 550 560 790 67053 68 92 120 170 200 240 270 300 310

110 140 190 290 420 500 700 810 1050 1200 1400 1450 1600 1700 1800 180051 67 92 120 180 210 260 290 350 380

100 135 180 270 400 480 670 770 1000 1150 1350 1450 1600 1800 1900 200049 64 89 120 180 210 260 300 370 420 480 510 55086 115 160 230 340 420 580 670 880 1000 1200 1300 1450 1600 1750 180045 60 83 110 170 200 250 300 380 440 510 550 600 670 720 75071 95 130 190 280 350 480 560 740 860 1000 1100 1250 1400 1500 160074 115 170 215 240 255 430 440 620 52043 58 78 99 145 180 220 250 270 32086 120 160 230 340 400 570 650 810 940 1150 1200 1300 1500 1600 170041 57 77 99 150 180 220 260 300 340 390 420 45081 110 150 220 320 380 540 620 770 900 1100 1200 1300 1500 1600 170039 54 74 97 140 170 210 250 310 360 420 450 490 560 600 63069 95 130 190 270 330 460 530 670 790 960 1050 1150 1350 1450 150036 50 68 91 135 160 200 240 300 350 430 460 510 590 640 67056 78 105 155 230 270 380 440 560 660 810 870 960 1150 1250 1300

67 100 150 195 215 230 390 390 560 470

P+tc

P+tc

P+tc

20

31.5

35.5

56

63

100


Additional thermal power with cooling coil - see p. A4To be applied only if basic thermal ratings are listed

P+tc

P+tc

Refer to us

Additional thermal power with cooling coil - see p. A4To be applied only if basic thermal ratings are listed

140

250

280

500

ansen

P+tc

P+tc

P+tc

B16


QGear unit

VVertical L.S.S.

PParallel shafts

C FSize Two stages

2 P


iN n1 n2 C D E F

1750 2801460 2301160 185870 140

1750 2451460 2051160 165870 125

1750 2201460 1851160 145870 110

1750 1951460 1601160 130870 97

1750 1751460 1451160 115870 87

1750 1551460 1301160 105870 78

1750 1401460 1151160 93870 70

1750 1251460 1051160 83870 62

1750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52870 39

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

hp

469 719 1160 1560413 613 974 1380339 496 779 1110256 375 589 841418 617 970 1450351 527 814 1210280 430 652 972212 326 492 735408 589 948 1290345 502 795 1120275 402 636 907208 303 480 685339 507 793 1180284 432 665 991228 350 531 793172 264 401 599327 475 744 1040274 401 624 884219 320 499 707165 241 377 534271 409 622 921227 349 522 772181 279 417 617137 211 314 467256 381 602 842215 319 504 705172 255 402 565129 192 304 425212 330 503 736177 276 421 617142 221 337 493107 166 253 371208 296 468 687174 248 393 575138 198 314 460105 149 236 346172 257 392 601143 215 327 503115 172 261 40186 129 197 303

162 244 377 551135 204 315 463109 162 252 36982 123 190 278

134 212 315 483113 177 264 40490 141 211 32268 106 158 243

Nom.speedrpm

ansen

B17


QGear unit

VVertical L.S.S.

PParallel shafts

C FSize Two stages

2 T


iN n1 n2 C D E F

1750 2801460 2301160 185870 140

1750 2451460 2051160 165870 125

1750 2201460 1851160 145870 110

1750 1951460 1601160 130870 97

1750 1751460 1451160 115870 87

1750 1551460 1301160 105870 78

1750 1401460 1151160 93

870 701750 1251460 1051160 83

870 621750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52

870 39

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

1000 lbf.in

105 166 258 362111 170 260 386115 173 262 391116 175 264 394108 161 249 366109 165 250 368109 170 252 370110 171 254 373114 169 260 371115 172 262 385116 174 263 393116 175 265 396109 164 250 368109 168 252 370110 171 253 372111 172 255 376115 172 262 387115 174 264 394116 175 265 396117 176 267 399110 167 252 371110 171 254 373110 172 255 375111 173 256 378116 175 264 394116 175 265 396117 176 266 399117 177 269 400110 171 254 373110 172 255 375111 173 256 378111 173 257 379116 176 265 397117 176 267 398117 178 268 401118 178 269 402111 173 255 376111 172 256 377111 174 257 378112 174 259 381117 176 267 398117 177 268 401118 177 269 402118 178 271 403111 173 257 378111 173 258 379112 174 259 380112 175 259 382

Nom.speedrpm

ansen

B18


QGear unit

VVertical L.S.S.

PParallel shafts


3 P



1750 881460 731160 58870 44

1750 781460 651160 52

870 391750 701460 581160 46870 35

1750 631460 521160 41870 31

1750 561460 461160 37

870 27.51750 491460 411160 33

870 24.51750 441460 371160 29

870 221750 391460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.8

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

112

hp

188 278 397 634 919 4190 *160 237 339 531 770 3540127 193 276 424 614 283096 146 215 319 464 2140 3620

166 244 347 563 801 1370 1730 3850 * 4170 *139 208 296 471 670 1140 1490 3220 3670 5390 *111 170 243 375 535 913 1220 2580 2930 432083 130 188 283 404 689 917 1940 2220 3250 3730

152 229 329 514 750 944 1260 1640 2120 2530 3380 3870 * 5710 *127 196 280 429 628 805 1060 1390 1780 2230 2830 3250 4790 5480 *101 157 228 343 500 650 845 1130 1420 1850 2270 2610 3820 445076 117 177 259 377 491 637 849 1070 1390 1710 1970 2890 3360 3790

132 201 287 455 653 848 1110 1420 1930 2410 3080 3510 4170 * 5150 * 5710 *110 172 245 381 547 709 932 1210 1620 2110 2580 2940 3560 4320 4880 548088 139 200 304 436 567 744 966 1290 1690 2060 2350 2840 3450 3950 450066 105 156 229 329 428 561 728 976 1270 1560 1780 2150 2610 2980 3410

123 186 268 409 586 786 1030 1330 1660 2120 2740 3100 3870 * 4630 5310 * 5710 *103 156 228 342 491 664 861 1120 1390 1840 2300 2610 3240 3880 4450 488082 124 186 272 392 530 688 893 1120 1460 1830 2090 2590 3100 3560 398062 93 141 205 295 400 518 673 842 1110 1390 1580 1960 2330 2680 3030

107 164 235 362 511 691 865 1170 1520 2000 2490 2840 3390 4170 4730 5310 *89 139 200 303 428 578 724 984 1270 1680 2090 2380 2850 3500 4010 450071 111 164 241 341 461 578 786 1020 1340 1670 1890 2270 2790 3200 360054 83 123 182 257 347 436 593 766 1010 1260 1440 1710 2110 2410 272099 148 215 325 473 621 799 1090 1330 1720 2180 2520 3090 3690 4300 472083 123 182 271 397 519 669 911 1120 1450 1830 2110 2600 3090 3600 403066 98 146 216 316 414 534 727 890 1150 1460 1700 2070 2460 2880 324050 73 110 162 237 312 402 547 670 870 1100 1280 1570 1870 2180 245086 132 188 287 413 540 691 913 1210 1570 1980 2260 2750 3320 3810 435072 110 161 240 345 453 578 764 1020 1320 1670 1890 2310 2780 3180 365057 88 128 192 275 361 460 610 810 1050 1320 1520 1840 2220 2540 293043 66 96 145 208 272 347 460 610 791 1000 1140 1390 1670 1920 220077 117 177 252 367 502 638 845 1110 1380 1690 2010 2500 2870 3430 385064 98 149 211 308 420 534 707 927 1150 1420 1680 2100 2400 2870 324051 78 119 168 245 334 426 565 739 920 1130 1350 1670 1920 2290 258038 58 89 126 185 252 320 425 557 693 853 1020 1260 1440 1720 194067 105 156 223 320 437 562 730 1010 1250 1540 1760 2190 2580 2960 348056 88 130 186 268 365 469 610 843 1050 1290 1470 1840 2170 2480 291045 70 103 149 213 291 374 487 673 837 1030 1170 1460 1720 1970 233034 52 78 112 161 220 282 366 507 632 777 883 1100 1300 1490 175052 77 122 174 295 389 519 675 873 1140 1380 1560 1990 2280 2660 300044 64 102 145 247 326 434 565 731 957 1160 1320 1670 1910 2230 252035 51 81 116 197 260 346 449 582 764 925 1050 1340 1520 1780 201026 38 61 87 149 196 260 339 439 575 697 794 1010 1150 1340 152043 67 102 152 257 339 451 593 794 1040 1260 1430 1690 2050 2350 270036 56 85 127 215 283 377 496 665 872 1050 1200 1420 1720 1970 226029 44 68 101 172 227 300 396 530 695 842 957 1140 1370 1570 180022 33 51 76 129 170 227 298 398 523 633 721 856 1030 1180 136042 62 95 143 204 312 417 548 605 901 1130 1280 1550 1840 2110 239035 52 80 120 170 261 349 459 506 755 942 1070 1300 1530 1780 200028 41 63 95 135 208 278 366 404 602 751 859 1030 1220 1410 159021 31 48 72 102 157 209 275 303 453 566 649 780 922 1070 120035 54 79 122 180 272 341 476 548 821 1020 1170 1400 1660 1890 215029 45 66 102 150 228 284 398 459 687 857 976 1160 1380 1580 180023 36 53 81 119 181 227 318 365 547 684 778 927 1100 1260 144017.5 27 40 61 90 137 170 239 275 412 515 585 699 830 951 108033 51 76 115 160 287 440 473 1040 1260 1710 192027 43 64 96 134 240 367 396 875 1060 1420 161022 34 51 76 106 190 294 315 699 844 1140 128016.5 26 38 57 80 143 221 237 527 636 856 96527 44 64 100 141 276 440 1030 173023 37 53 84 117 231 367 861 145018 30 42 67 93 184 294 686 115013.5 22 32 50 70 138 220 516 869

Nom.speedrpm

ansen

B19



QGear unit

VVertical L.S.S.

PParallel shafts


3 T



1750 881460 731160 58

870 441750 781460 651160 52

870 391750 701460 581160 46

870 351750 631460 521160 41

870 311750 561460 461160 37

870 27.51750 491460 411160 33

870 24.51750 441460 371160 29

870 221750 391460 321160 26

870 19.51750 351460 291160 23

870 17.51750 311460 261160 20.5

870 15.51750 281460 231160 18.5

870 141750 24.51460 20.51160 16.5

870 12.51750 221460 18.51160 14.5

870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.8

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

112

1000 lbf.in

134 197 278 457 650 2970 *136 202 284 459 653 3010136 207 292 461 656 3030137 209 302 462 661 3050 5210136 194 279 459 652 1140 1420 3000 * 3410 *137 198 286 459 655 1150 1470 3020 3590 5150137 204 294 461 657 1150 1510 3040 3610 5190137 208 304 463 661 1160 1520 3050 3640 5210 6130136 202 285 459 654 854 1140 1460 1940 2300 3010 3480 * 5140 *136 207 292 460 656 872 1150 1490 1960 2420 3030 3500 5170 5970 *137 209 299 463 658 887 1150 1510 1970 2540 3050 3530 5190 6090137 208 309 466 661 893 1160 1520 1980 2550 3070 3560 5230 6130 6980136 198 286 460 656 882 1150 1480 1950 2410 3020 3600 4250 * 5160 * 5860 *137 203 294 462 658 885 1150 1510 1960 2520 3040 3620 4350 5190 6000 6700137 207 301 464 660 891 1160 1520 1970 2550 3050 3640 4360 5210 6120 6920138 208 312 466 663 895 1160 1530 1980 2550 3070 3670 4410 5250 6150 6990137 207 294 462 656 876 1150 1500 1950 2440 3030 3510 4340 * 5170 6060 * 6580 *137 208 300 463 659 887 1150 1510 1960 2530 3050 3540 4350 5190 6090 6740137 208 308 464 662 891 1160 1520 1980 2540 3060 3560 4380 5220 6140 6920138 208 311 466 665 896 1160 1530 1990 2560 3090 3600 4410 5250 6160 7030137 204 296 462 658 886 1150 1510 1960 2530 3040 3630 4340 5190 6030 6800 *137 208 302 464 661 889 1160 1520 1970 2540 3050 3630 4370 5210 6120 6920137 208 311 465 662 893 1160 1520 1980 2550 3080 3640 4380 5230 6160 6970138 208 312 468 667 896 1170 1530 1990 2570 3090 3690 4410 5290 6180 7020137 207 302 464 659 889 1160 1510 1970 2530 3050 3530 4350 5210 6100 6760137 208 308 464 663 890 1160 1520 1980 2550 3070 3560 4380 5230 6120 6920138 208 310 466 665 895 1160 1530 1990 2560 3090 3600 4410 5240 6160 7000138 208 313 467 665 899 1170 1530 1990 2580 3100 3620 4440 5300 6210 7050137 208 304 464 662 890 1160 1520 1970 2540 3050 3630 4370 5220 6130 6930137 208 312 465 662 895 1160 1520 1980 2550 3080 3650 4400 5230 6140 6980138 208 312 467 665 896 1170 1530 1990 2570 3070 3690 4410 5250 6170 7040138 208 313 471 670 902 1170 1540 2000 2580 3100 3690 4430 5280 6210 7060137 208 309 466 662 893 1160 1520 1980 2560 3070 3560 4380 5240 6140 6950138 208 312 466 666 895 1160 1530 1980 2560 3090 3580 4400 5260 6160 7010138 208 312 467 667 897 1170 1530 1990 2570 3100 3600 4410 5290 6200 7030139 208 314 470 671 903 1170 1540 2000 2580 3110 3640 4450 5290 6210 7070138 208 312 465 664 895 1160 1530 1980 2560 3070 3670 4400 5250 6170 7000138 208 312 467 666 895 1170 1530 1990 2570 3090 3690 4430 5280 6200 7010138 208 313 469 667 899 1170 1540 2000 2570 3100 3690 4430 5290 6200 7080139 208 314 470 671 906 1170 1540 2000 2590 3120 3710 4460 5300 6250 7080119 180 272 408 664 895 1160 1530 1990 2560 3080 3590 4400 5270 6170 7020119 180 273 407 666 899 1170 1530 1990 2570 3090 3630 4420 5270 6200 7070120 180 274 409 669 903 1170 1540 2000 2580 3110 3640 4450 5280 6210 7100120 181 275 411 674 906 1170 1550 2010 2590 3120 3660 4470 5330 6230 7140113 176 261 384 667 898 1170 1530 1990 2560 3090 3680 4410 5260 6180 7030113 176 262 386 666 898 1170 1540 2000 2570 3100 3690 4430 5310 6220 7050114 177 263 387 670 905 1170 1540 2000 2580 3110 3700 4450 5330 6230 7080113 178 263 389 672 907 1180 1550 2010 2590 3120 3720 4470 5340 6270 7130119 180 273 410 597 898 1170 1530 1720 2570 3100 3620 4440 5300 6190 7060120 180 274 409 598 901 1170 1540 1730 2580 3110 3630 4440 5280 6230 7080120 181 274 410 598 902 1180 1540 1730 2590 3120 3650 4460 5320 6250 7110120 181 275 411 603 907 1180 1550 1740 2600 3130 3680 4480 5350 6280 7150113 177 262 386 579 901 1060 1540 1800 2580 3100 3690 4460 5310 6220 7080113 177 263 387 580 904 1060 1540 1800 2580 3110 3700 4460 5320 6230 7100114 177 263 388 581 904 1060 1550 1810 2590 3120 3720 4470 5330 6260 7140114 178 264 389 582 910 1070 1550 1810 2600 3140 3730 4490 5360 6290 7160120 180 274 410 599 983 1540 1730 3640 4450 6250 7080120 181 275 411 601 986 1540 1730 3650 4460 6240 7110120 181 275 411 603 985 1550 1740 3670 4480 6270 7140120 182 276 412 604 989 1560 1740 3690 4490 6300 7170113 177 263 388 582 1060 1800 4060 7130114 177 264 388 581 1060 1810 4070 7140114 177 264 389 582 1070 1820 4080 7150114 178 264 390 584 1070 1810 4100 7180

Nom.speedrpm

ansen


B20


QGear unit

VVertical L.S.S.

PParallel shafts

D QSize Four stages

4 P


iN n1 n2 D E F G H J K L M N P Q1750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3

870 71750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3

870 5.41750 9.71460 8.11160 6.4

870 4.81750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7

870 2.81750 4.91460 4.11160 3.3

870 2.51750 4.41460 3.71160 2.9

870 2.21750 3.91460 3.21160 2.6

870 1.91750 3.51460 2.91160 2.3

870 1.751750 3.11460 2.61160 2.05

870 1.551750 2.81460 2.31160 1.85

870 1.4

hp

57 88 129 189 256 323 582 739 85348 74 108 158 213 271 487 618 71438 59 86 126 170 216 388 492 57029 44 65 95 128 162 292 371 42851 77 115 165 223 288 385 507 644 789 88443 64 96 138 186 241 322 424 538 660 73934 51 76 110 149 192 257 338 429 526 58926 38 57 82 112 145 193 253 323 396 44447 71 103 150 200 267 342 449 601 712 81839 60 86 126 168 223 286 375 503 596 68331 47 68 100 133 178 228 299 401 475 54523 36 51 75 100 134 172 225 302 357 41042 62 91 131 174 229 306 409 524 648 738 85735 52 76 109 146 192 255 342 439 542 618 71728 41 60 87 116 153 204 272 349 432 492 57121 31 45 65 87 115 153 205 263 325 370 43031 58 82 117 160 212 282 351 464 553 663 79226 48 68 98 133 177 236 294 388 463 555 66220 38 54 78 106 141 188 233 308 369 443 52815.5 29 41 59 80 106 141 176 232 277 334 39727 50 72 102 138 182 243 319 422 504 573 71522 42 60 85 116 152 202 267 353 421 480 59817.5 33 48 68 92 121 161 212 282 335 382 47613.5 25 36 51 69 91 121 160 212 252 287 35825 45 65 95 124 168 224 283 362 440 515 65121 37 54 79 104 141 188 236 303 369 431 54516.5 30 43 63 83 112 149 188 241 293 344 43312.5 22 32 47 62 84 112 141 181 221 260 32621 39 57 82 108 141 192 257 330 401 457 55518 32 48 69 90 118 161 215 276 335 382 46414 26 38 55 72 94 128 172 220 268 304 37010.5 19.5 29 41 54 70 96 129 165 201 229 27820 36 53 74 100 130 177 219 292 358 411 50517 30 44 62 84 109 149 184 244 299 344 42213.5 24 35 49 67 87 118 146 194 239 274 33610 18 26 37 50 65 89 110 146 179 207 25317.5 31 47 64 87 116 149 200 266 325 371 44215 26 39 54 73 97 124 166 223 272 310 37011.5 21 31 43 58 77 99 133 177 217 247 2958.8 15.5 23 32 44 58 74 100 133 163 186 222

15.5 24 36 59 78 107 138 176 227 287 334 40213 20 30 49 65 89 115 148 189 239 280 33610.5 16 24 39 52 71 91 117 150 191 223 2687.8 12 18 30 39 53 69 88 113 143 168 201

13.5 20 32 52 68 93 122 160 207 261 298 35911.5 17 26 43 57 78 102 134 172 218 248 3019.1 13.5 21 34 45 62 81 106 137 174 198 2396.8 10 16 26 34 46 61 80 103 130 148 179

12.5 19 30 41 63 86 113 121 181 233 269 32610.5 16 25 34 52 72 94 102 152 195 225 2738.4 12.5 19.5 27 42 57 75 81 121 155 179 2186.3 9.5 15 20 31 43 56 61 91 117 135 164

11 16 25 36 55 70 98 110 165 212 242 2899.1 13 21 30 46 58 82 92 138 177 202 2417.3 10.5 17 24 36 47 65 73 110 141 160 1925.5 7.9 12.5 18 27 35 49 55 83 107 121 144

15.5 24 32 57 91 95 120 218 26312.5 20 27 47 76 79 100 182 21810 16 21 38 60 63 80 146 1747.6 12 16 28 45 47 60 109 131

12.5 21 28 48 70 88 115 23410.5 17.5 23 40 58 74 96 1958.4 14 18.5 32 46 59 77 1566.3 10.5 14 24 35 44 58 117

57 76 94 21348 64 78 17838 51 62 14228 38 47 107

Nom.speedrpm

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

560

630

ansen

B21


QGear unit

VVertical L.S.S.

PParallel shafts

D QSize Four stages

4 T


iN n1 n2 D E F G H J K L M N P Q1750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3

870 71750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3

870 5.41750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7

870 2.81750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

1750 3.11460 2.61160 2.05870 1.55

1750 2.81460 2.31160 1.85870 1.4

1000 lbf.in

207 314 467 669 903 1170 2000 2580 3110208 314 470 671 901 1180 2000 2590 3120208 315 471 672 906 1180 2010 2590 3130208 316 473 673 908 1180 2020 2610 3140208 314 470 671 902 1170 1540 2000 2590 3110 3710208 315 471 673 905 1180 1540 2010 2590 3120 3720208 315 472 673 910 1180 1550 2010 2600 3130 3730208 315 472 675 909 1190 1550 2010 2610 3140 3740208 314 471 670 903 1180 1550 2010 2590 3120 3720208 315 471 672 908 1180 1550 2010 2600 3130 3720208 315 473 674 909 1190 1550 2020 2610 3140 3730207 316 473 676 910 1180 1560 2030 2610 3140 3740208 315 471 671 906 1180 1550 2010 2600 3120 3720 4480208 315 472 673 911 1180 1550 2020 2600 3130 3730 4490208 315 472 674 910 1180 1560 2020 2610 3140 3740 4500208 317 473 676 911 1190 1560 2030 2620 3140 3750 4510181 315 472 672 910 1180 1550 2020 2600 3130 3670 4480181 315 472 673 909 1180 1550 2020 2600 3140 3690 4490181 316 473 675 910 1180 1550 2020 2610 3150 3700 4510181 316 474 676 912 1190 1550 2030 2620 3150 3720 4520178 315 472 673 906 1190 1550 2020 2610 3140 3730 4490178 316 473 674 909 1180 1550 2020 2610 3140 3740 4500178 316 474 675 912 1190 1550 2020 2620 3150 3750 4510179 318 475 678 913 1190 1560 2030 2630 3150 3760 4520181 315 473 674 909 1180 1550 2020 2610 3130 3690 4500182 317 473 674 910 1190 1560 2020 2610 3150 3700 4510183 317 474 676 913 1190 1560 2020 2620 3150 3720 4510182 317 474 677 915 1190 1560 2020 2620 3160 3740 4520178 316 473 675 911 1180 1550 2020 2610 3140 3750 4500179 317 473 676 911 1190 1560 2020 2620 3140 3750 4510178 316 474 677 914 1190 1560 2030 2630 3160 3760 4530179 316 476 677 916 1190 1560 2030 2630 3170 3770 4530182 316 474 676 911 1190 1550 2020 2620 3140 3710 4510183 316 474 676 913 1190 1560 2030 2620 3150 3720 4520183 317 474 678 913 1190 1560 2040 2630 3170 3730 4530182 318 476 679 917 1190 1570 2030 2630 3170 3740 4540178 316 474 676 913 1190 1560 2030 2620 3140 3750 4520179 317 475 677 912 1190 1560 2020 2630 3150 3750 4530179 317 474 678 916 1190 1560 2030 2630 3160 3760 4540179 318 475 680 916 1190 1570 2040 2630 3160 3780 4560182 277 413 676 913 1190 1570 2030 2620 3160 3720 4520182 277 415 676 915 1190 1560 2040 2620 3150 3730 4520183 278 416 678 915 1190 1560 2030 2620 3160 3750 4530183 278 416 680 915 1190 1570 2040 2630 3160 3750 4550179 266 391 677 914 1190 1560 2020 2630 3160 3770 4520179 266 392 677 914 1190 1560 2030 2620 3160 3770 4540179 267 393 679 917 1190 1570 2040 2630 3170 3770 4540179 266 394 679 919 1190 1570 2040 2640 3160 3770 4540182 277 414 607 914 1190 1560 1750 2620 3150 3740 4520182 278 414 608 916 1190 1560 1760 2630 3170 3750 4540183 278 414 609 917 1190 1570 1760 2640 3160 3760 4560183 278 417 608 920 1190 1570 1760 2640 3190 3780 4560179 265 392 587 915 1080 1560 1830 2620 3160 3770 4550179 266 393 588 916 1080 1570 1830 2630 3160 3770 4540179 266 394 588 919 1080 1570 1840 2640 3160 3760 4570179 267 393 590 918 1080 1570 1840 2640 3200 3790 4570

278 416 609 1080 1570 1760 2170 3750 4550278 414 608 1080 1570 1760 2170 3740 4540278 416 608 1080 1570 1760 2170 3770 4550278 416 610 1080 1570 1770 2180 3770 4570266 392 586 999 1330 1830 2370 4550266 394 589 999 1330 1840 2380 4540266 393 588 999 1330 1840 2380 4570267 394 587 999 1330 1840 2380 4570

1250 1760 2170 45601250 1760 2180 45601250 1760 2180 45701250 1760 2180 4590

Nom.speedrpm

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

560

630

ansen

B22


QGear unit

VVertical L.S.S.

PParallel shafts

C FSize Two stages

2 Pt

hp


iN n1 C D E F

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -


P+tc

6.3

9

10

14

16

25

68 7297 120 105

115 150 170 200120 165 200 250270 300 360 40092 110 105 110

105 130 145 180110 140 170 220105 145 180 230215 240 290 32088 110 120 14591 120 140 18090 120 150 19086 120 150 200

215 240 290 320

P+tc

P+tc

P+tc

ansen

B23


QGear unit

VVertical L.S.S.

PParallel shafts


3 / 4 Pt

hp


iN n1 D E F G H J K L M N P Q1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

62 82 110 160 180 170 180 250 270 230 240 27060 79 110 155 170 180 190 260 280 270 280 31057 73 100 145 165 180 190 260 280 280 310 34052 68 93 135 150 170 190 250 270 300 310 34056 87 98 297 315 312 315 712 71253 64 90 125 145 155 170 220 240 240 250 28051 61 86 120 140 150 170 220 240 250 270 30048 57 81 110 130 150 160 210 240 250 270 31045 52 73 105 120 135 150 200 220 240 270 30047 73 83 252 266 264 266 602 60244 52 74 100 115 125 140 170 200 210 230 25043 50 70 96 110 120 135 170 190 210 230 25040 47 66 90 105 115 130 160 180 210 230 25038 44 61 84 95 105 120 150 170 200 210 23044 68 77 234 247 245 247 559 559


P+tc

100

160



1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

89 115 150 190 280 300 280 270 380 37086 110 150 190 280 310 300 310 420 430 480 510 520 540 550 58082 110 145 190 270 300 320 340 440 470 550 580 600 680 720 75076 100 135 180 260 290 310 340 430 470 560 600 640 760 800 84090 88 135 155 470 490 490 490 1100 110073 97 125 160 230 260 270 290 380 400 470 500 510 560 590 60070 94 125 160 230 260 280 300 390 430 500 520 580 640 680 71066 89 120 160 220 260 280 310 390 430 500 540 590 670 720 78060 82 110 150 210 240 270 300 380 430 480 520 590 670 720 79079 77 120 135 410 430 430 430 980 98055 78 105 135 180 220 220 260 310 360 420 440 500 540 580 62053 75 100 130 180 210 230 260 320 370 430 460 510 560 600 64049 71 94 125 170 210 220 250 320 370 430 460 500 560 620 64045 65 86 115 160 190 210 240 300 360 420 440 480 550 590 630

79 77 120 135 410 430 430 430 980 980

P+tc

P+tc

P+tc

20

31.5

35.5

56

63

112

180

315

355

600

P+tc

P+tc

P+tc

ansen

B24


QGear unit

VVertical L.S.S.

RRight-angle shafts

C MSize Two stages

2 P


iN n1 n2 C D E F G H J K L M1750 2801460 2301160 185870 140

1750 245 * *1460 205 *1160 165870 125

1750 220 * *1460 185 *1160 145870 110

1750 195 * * *1460 160 *1160 130870 97

1750 175 * * *1460 145 *1160 115870 87

1750 155 *1460 1301160 105870 78

1750 140 *1460 1151160 93870 70

1750 1251460 1051160 83870 62

1750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52870 39

1750 701460 581160 46

870 35

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

hp

449 717 925 1320 2330374 611 815 1170 2050298 489 693 984 1640224 367 527 739 1240408 640 925 1320 2150 3410 5500349 536 815 1170 1800 3000 4840279 429 652 978 1450 2550 4120211 325 493 739 1090 1970 3370382 585 921 1270 1980 2330 3260 5160326 493 782 1090 1660 2070 2750 4550267 394 625 872 1330 1720 2200 3860204 298 472 660 1010 1300 1660 2950334 512 779 1140 1740 2200 2840 3410 4590 5500279 429 653 953 1460 1850 2510 3000 4040 4840223 343 522 763 1170 1490 2070 2560 3450 4120169 259 394 577 884 1120 1570 1960 2640 3370314 469 744 1030 1530 1980 2590 3080 4240 5160268 393 629 888 1290 1740 2170 2660 3740 4550219 314 503 711 1030 1390 1740 2130 3030 3850166 237 380 536 778 1060 1320 1610 2290 2920271 408 626 927 1350 1800 2430 2860 3920 4590228 342 526 776 1130 1500 2110 2510 3450 4040181 272 420 621 904 1210 1690 2050 2840 3450137 205 316 469 683 911 1270 1560 2160 2680237 345 575 760 1200 1610 2120 2510 3620 4240197 288 480 636 999 1350 1770 2110 3080 3730157 229 381 504 794 1080 1420 1690 2470 2990118 172 286 378 597 817 1070 1280 1860 2270215 331 503 739 1090 1390 1960 2430 3300 3920180 278 421 620 913 1170 1640 2090 2790 3450143 221 337 495 730 932 1300 1680 2210 2840108 166 253 374 551 704 976 1270 1660 2210166 244 389 544 885 1200 1690 2050 2950 3620138 204 325 453 739 999 1420 1720 2480 3030110 161 257 361 587 794 1130 1370 1980 243083 121 193 271 440 597 856 1040 1500 1840

166 244 389 544 885 1120 1380 1960 2510 3300138 204 325 453 739 941 1150 1640 2090 2790110 161 257 361 587 752 912 1300 1660 221083 121 193 271 440 567 684 976 1250 1660

885 1330 1640 2390 2910739 1110 1370 2000 2440587 890 1100 1600 1960440 672 829 1210 1480885 1380 2510739 1150 2090587 912 1660440 684 1250

1290 23501080 1970861 1580650 1190

Nom.speedrpm


ansen

B25



iN n1 n2 C D E F G H J K L M

1750 2801460 2301160 185870 140

1750 245 * *1460 205 *1160 165870 125

1750 220 * *1460 185 *1160 145870 110

1750 195 * * *1460 160 *1160 130870 97

1750 175 * * *1460 145 *1160 115870 87

1750 155 *1460 1301160 105870 78

1750 140 *1460 1151160 93

870 701750 1251460 1051160 83

870 621750 1101460 911160 73

870 541750 971460 811160 64

870 481750 881460 731160 58870 44

1750 781460 651160 52

870 391750 701460 581160 46

870 35

101 167 206 306 538101 170 217 324 567101 172 233 344 569102 172 236 344 576106 168 237 332 545 875 1380108 169 250 350 547 925 1450109 170 252 370 555 987 1560110 172 254 373 557 1020 1700108 171 258 380 568 679 921 1440111 173 262 391 571 720 931 1520114 174 264 394 574 754 938 1620116 175 266 397 579 763 945 1650109 169 251 369 549 705 928 1080 1490 1710109 170 252 370 552 711 981 1150 1580 1800110 171 253 373 556 720 1020 1230 1690 1930111 172 255 376 560 725 1030 1250 1730 2100110 174 260 381 570 717 929 1130 1540 1800113 174 264 393 575 755 935 1160 1630 1900116 175 265 396 579 760 944 1180 1660 2030117 177 267 399 584 768 952 1180 1670 2050109 170 252 371 556 715 979 1160 1580 1850110 171 253 373 556 716 1020 1220 1660 1950110 172 255 375 560 724 1030 1250 1730 2100111 173 256 378 564 729 1030 1270 1750 2180106 158 252 355 557 757 940 1160 1620 1920105 158 252 355 557 764 942 1170 1660 2030106 158 252 355 557 767 952 1180 1670 2050106 158 252 355 558 773 956 1190 1680 2070110 171 253 373 557 723 994 1210 1660 1960110 172 254 375 560 724 996 1250 1690 2060111 173 256 377 563 729 996 1260 1680 2140111 173 257 380 567 734 997 1270 1690 2220

94 143 217 319 509 702 944 1180 1660 203094 143 218 318 509 702 952 1180 1670 204094 142 217 318 509 702 955 1180 1680 206094 143 217 319 509 704 961 1200 1700 2080

109 161 250 345 560 725 899 1230 1580 2060108 161 250 344 560 729 895 1230 1580 2090109 160 250 345 560 733 895 1230 1580 2090109 161 250 345 560 737 895 1240 1580 2090

642 951 1180 1670 2050642 956 1180 1680 2060643 962 1200 1680 2080642 967 1200 1700 2090707 1110 1950708 1110 1950708 1110 1950707 1110 1950

1190 20601200 20701200 20901210 2100

QGear unit

VVertical L.S.S.

RRight-angle shafts

C MSize Two stages

2 T

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

1000 lbf.inNom.speedrpm


ansen

B26


QGear unit

VVertical L.S.S.

RRight-angle shafts


3 P



1750 881460 731160 58

870 441750 781460 651160 52

870 391750 701460 581160 46870 35

1750 631460 521160 41870 31

1750 561460 461160 37870 27.5

1750 491460 411160 33870 24.5

1750 441460 371160 29870 22

1750 391460 321160 26870 19.5

1750 351460 291160 23870 17.5

1750 311460 261160 20.5870 15.5

1750 281460 231160 18.5870 14

1750 24.51460 20.51160 16.5870 12.5

1750 221460 18.51160 14.5870 11

1750 19.51460 161160 13870 9.7

1750 17.51460 14.51160 11.5870 8.7

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

hp

173 278 396 630 920145 232 337 528 771115 185 275 421 61686 138 213 318 464

169 245 346 559 802 1320142 209 295 468 672 1150113 170 241 374 536 919

85 131 186 282 405 693153 227 323 504 736 925 1270 2150 3320 * 5650 *129 193 275 422 617 806 1060 1800 2790 4830103 153 225 337 492 652 850 1430 2230 3860

77 115 174 253 370 491 641 1080 1690 2920134 198 283 447 641 849 1070 1320 1960 3040 * 3420 * 5190 * 5650 *112 169 241 374 538 711 896 1170 1640 2550 2880 4360 * 4920 *90 137 197 299 429 567 715 971 1310 2040 2310 3470 398067 103 153 225 323 428 539 732 986 1530 1740 2630 3010

122 185 268 401 591 774 990 1320 1730 2210 2630 3050 * 4460 * 5220 * 5650 *102 154 228 335 495 652 829 1130 1450 1850 2210 2570 3750 4490 4910

81 123 186 267 396 520 661 898 1160 1490 1760 2060 2980 3590 401061 92 142 201 298 392 499 677 876 1120 1340 1560 2260 2710 3060

106 164 235 355 515 679 870 1130 1580 2010 2400 2720 3340 * 4020 * 4580 * 5220 *89 138 200 296 432 569 728 947 1320 1690 2010 2280 2810 3370 3860 4540 *71 110 164 237 345 453 581 755 1060 1350 1610 1830 2240 2700 3090 364053 82 124 178 259 342 439 570 797 1020 1210 1370 1690 2040 2320 275099 142 217 325 473 626 805 1040 1340 1800 2140 2420 3050 * 3620 4150 * 4580 *83 119 185 271 397 524 673 876 1120 1500 1800 2040 2560 3040 3470 390066 95 149 216 316 418 538 699 896 1200 1440 1630 2040 2420 2770 312049 71 112 162 239 315 405 527 675 905 1080 1230 1540 1830 2100 236086 132 190 287 413 546 693 919 1220 1640 1960 2220 2650 3270 3740 4200 *72 110 162 240 346 456 579 770 1020 1370 1630 1870 2220 2740 3130 352057 87 129 192 275 365 463 614 815 1090 1310 1490 1780 2190 2500 281043 66 97 145 208 275 349 463 614 823 984 1120 1340 1650 1890 213073 110 166 244 373 502 641 850 1080 1380 1710 1980 2410 2910 3380 379061 92 138 204 312 420 536 712 905 1160 1440 1660 2020 2440 2820 318048 73 110 161 248 335 428 567 721 925 1140 1320 1610 1940 2260 254036 55 83 121 188 252 322 428 543 697 863 1000 1220 1460 1700 192069 104 153 227 325 437 544 732 984 1260 1560 1770 2150 2620 3000 342058 86 128 189 272 366 453 613 823 1060 1310 1490 1800 2190 2520 287046 69 102 150 216 291 361 488 657 842 1040 1180 1440 1750 2010 229035 51 77 113 164 220 271 367 495 634 785 894 1090 1320 1520 172054 76 120 176 257 389 512 677 877 1120 1340 1580 1960 2350 2710 305045 63 100 148 216 325 429 566 734 935 1120 1330 1640 1970 2270 256036 50 80 117 172 257 342 452 586 746 896 1060 1310 1570 1800 204027 38 60 88 129 193 257 341 440 562 676 802 988 1180 1360 154045 66 100 154 227 343 418 544 798 1020 1220 1370 1720 2110 2420 275037 55 84 129 189 287 350 453 668 852 1020 1150 1440 1780 2020 230030 44 67 103 152 229 279 361 532 679 816 913 1150 1410 1620 184022 33 50 77 114 173 211 271 401 511 615 685 865 1060 1220 139042 62 96 141 202 353 542 607 885 1240 1560 2180 246035 52 81 118 169 295 453 508 739 1040 1310 1830 206028 41 64 94 134 235 361 405 587 833 1040 1450 165021 31 48 71 101 177 271 304 440 629 787 1100 124035 54 80 124 177 341 565 825 1340 222029 45 67 103 149 284 472 691 1130 185023 36 54 82 118 227 377 550 900 148017.5 27 40 62 89 170 283 414 678 1110

286 488 1230239 408 1030190 326 820143 245 618

Nom.speedrpm

ansen

B27



QGear unit

VVertical L.S.S.

RRight-angle shafts


3 T



1750 881460 731160 58

870 441750 781460 651160 52

870 391750 701460 581160 46870 35

1750 631460 521160 41870 31

1750 561460 461160 37870 27.5

1750 491460 411160 33870 24.5

1750 441460 371160 29870 22

1750 391460 321160 26870 19.5

1750 351460 291160 23870 17.5

1750 311460 261160 20.5870 15.5

1750 281460 231160 18.5870 14

1750 24.51460 20.51160 16.5870 12.5

1750 221460 18.51160 14.5870 11

1750 19.51460 161160 13870 9.7

1750 17.51460 14.51160 11.5870 8.7

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

1000 lbf.in

121 196 279 457 650121 196 284 459 653121 197 292 461 656121 196 302 463 659135 194 280 458 652 1100137 198 286 460 655 1150137 203 295 463 658 1150137 208 303 464 662 1160135 204 286 460 654 835 1140 1950 3020 * 5040 *136 208 292 461 657 872 1150 1960 3040 5160137 207 301 463 660 888 1150 1970 3050 5200137 208 310 465 661 891 1160 1980 3080 5230136 199 288 460 655 882 1150 1370 1960 3030 * 3570 * 5150 * 5740 *137 203 294 462 659 885 1150 1450 1960 3050 3610 5190 * 6000 *137 207 302 465 662 889 1160 1520 1970 3070 3640 5200 6110138 208 313 467 664 894 1160 1530 1980 3070 3650 5250 6150137 208 293 462 657 878 1150 1480 1950 2520 3040 3510 * 5170 * 5900 * 6450 *137 208 299 463 659 887 1160 1510 1960 2530 3050 3540 5210 6090 6720137 208 307 464 663 891 1160 1520 1970 2560 3070 3570 5220 6130 6900138 208 313 466 665 894 1170 1530 1990 2560 3100 3600 5270 6170 7030137 205 295 463 658 886 1150 1510 1960 2520 3040 3620 4340 * 5190 * 6060 * 6630 *137 208 301 463 661 890 1160 1520 1970 2540 3060 3630 4380 5210 6130 6920 *138 208 310 467 664 893 1160 1520 1980 2560 3080 3660 4400 5250 6160 6980138 208 312 467 665 898 1170 1530 1990 2570 3090 3670 4410 5290 6180 7030137 201 302 463 659 889 1160 1510 1970 2540 3050 3540 4370 * 5200 6110 * 6800 *137 201 309 464 662 892 1160 1520 1980 2540 3080 3560 4390 5230 6130 6950138 202 312 465 664 896 1170 1530 1990 2560 3090 3600 4400 5250 6160 7010138 202 313 466 668 899 1170 1540 1990 2570 3100 3620 4440 5280 6220 7050137 208 304 463 661 891 1160 1520 1970 2540 3070 3640 4380 5230 6130 6940 *137 208 311 464 664 892 1160 1520 1980 2550 3070 3670 4400 5250 6150 6990138 208 312 467 664 898 1170 1530 1990 2560 3100 3690 4430 5280 6180 7020138 208 313 470 669 903 1170 1540 2000 2580 3100 3690 4440 5290 6230 7070126 198 294 445 662 892 1160 1520 1980 2540 3060 3580 4390 5230 6150 6980126 198 293 445 665 895 1170 1530 1990 2560 3090 3590 4410 5260 6160 7020126 198 294 443 665 899 1170 1530 1990 2570 3090 3600 4410 5270 6200 7050126 198 295 445 671 902 1170 1540 2000 2580 3110 3640 4450 5300 6220 7100138 208 311 467 663 894 1140 1530 1980 2560 3090 3660 4400 5240 6150 6990138 208 312 467 667 898 1140 1530 1990 2560 3090 3680 4410 5260 6190 7040138 208 313 467 666 898 1140 1540 2000 2580 3100 3690 4440 5280 6210 7080138 208 314 470 673 905 1140 1540 2000 2590 3110 3710 4460 5320 6250 7100119 180 273 406 595 883 1170 1530 1980 2560 3090 3580 4400 5260 6190 7020119 180 273 408 598 883 1170 1530 1990 2570 3100 3620 4430 5290 6210 7060119 180 274 409 599 882 1170 1540 2000 2580 3110 3630 4440 5300 6200 7070120 181 275 411 602 882 1180 1550 2000 2590 3120 3660 4470 5330 6250 7140113 176 261 386 577 897 1060 1420 1990 2570 3090 3620 4430 5260 6190 7050113 177 262 386 577 898 1060 1420 1990 2580 3100 3640 4430 5300 6190 7050113 177 263 387 582 904 1060 1420 2000 2590 3110 3640 4460 5310 6240 7110114 177 263 389 581 909 1070 1430 2010 2600 3130 3640 4470 5330 6270 7150119 180 273 407 600 979 1540 1720 2510 3620 4430 6190 7070120 180 274 409 600 982 1540 1730 2510 3630 4430 6220 7090120 181 275 410 599 983 1540 1730 2510 3660 4460 6220 7120120 181 275 412 603 989 1540 1730 2510 3680 4480 6280 7140113 177 262 387 577 1060 1800 2580 4430 7070113 177 263 387 582 1060 1800 2590 4460 7090113 177 263 388 580 1070 1810 2590 4470 7110114 178 264 389 582 1070 1810 2600 4500 7160

979 1730 4450981 1730 4470985 1740 4480990 1750 4500

Nom.speedrpm

ansen


B28


QGear unit

VVertical L.S.S.

RRight-angle shafts

D TSize Four stages

4 P



870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3870 7

1750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3870 5.4

1750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8870 4.4

1750 7.81460 6.51160 5.2870 3.9

1750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7870 2.8

1750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

80

90

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

hp

69 113 150 233 315 398 716 1000 160060 95 133 194 263 333 599 882 141049 75 107 156 209 266 477 704 120037 57 81 117 158 200 359 530 92362 99 139 202 274 355 475 624 947 1090 1480 176054 83 119 169 229 298 397 522 817 915 1300 154044 66 95 135 182 237 316 416 650 730 1090 126033 49 71 102 138 178 237 312 489 550 822 95158 90 127 185 247 329 420 552 740 881 1010 1350 1690 176049 75 106 156 207 275 351 463 620 738 846 1190 1410 154039 60 84 124 164 219 280 369 493 587 675 972 1130 128029 45 64 93 123 165 211 278 371 443 508 732 849 96652 78 113 162 215 283 375 503 645 802 913 1060 1260 1540 172044 65 94 135 180 237 314 421 539 670 763 886 1100 1290 143035 52 75 108 142 189 251 335 429 535 609 707 876 1030 114026 39 56 81 107 142 188 252 323 402 459 532 658 772 86139 71 102 150 197 261 347 441 571 685 819 980 1160 1350 156032 59 85 126 164 219 290 369 477 573 687 819 987 1130 131026 47 68 100 131 174 231 294 381 456 547 653 786 902 104019.5 36 51 75 98 131 174 221 287 343 413 492 591 680 78334 62 90 131 172 225 299 401 519 624 709 885 1060 1220 138028 52 75 110 143 188 251 335 434 522 593 740 888 1020 115022 41 60 87 114 150 200 267 346 416 472 590 708 811 91717 31 45 66 86 113 150 201 260 312 355 444 532 610 69132 57 81 119 160 208 276 354 456 557 637 805 928 1100 126027 48 68 99 133 174 232 296 381 465 534 673 776 916 106021 38 54 79 106 138 184 236 303 370 426 536 618 730 84216 29 41 59 80 104 138 177 228 279 320 404 465 550 63327 50 72 103 138 182 237 322 414 489 575 688 818 957 111023 42 60 86 116 152 198 270 346 409 481 575 684 801 92918.5 33 48 69 92 121 158 215 276 326 384 459 544 638 74214 25 36 52 69 91 119 161 208 245 288 345 409 480 55825 46 64 93 126 168 220 283 366 441 519 625 731 848 97221 38 53 78 105 141 184 236 306 369 434 523 611 708 81316.5 31 43 62 84 112 146 188 243 294 346 417 487 565 64812.5 23 32 47 63 84 110 142 182 221 260 314 366 425 48722 40 57 81 109 143 192 257 333 402 457 558 658 771 86118 34 47 68 91 119 161 215 278 337 382 467 550 645 71914.5 27 38 54 73 95 128 172 221 268 304 371 439 514 57311 20 28 41 55 71 96 129 166 201 229 279 330 386 43020 32 44 75 99 132 177 223 292 353 413 508 593 679 78317 26 37 63 83 110 149 185 244 295 345 425 495 567 65413.5 21 29 50 66 88 118 148 194 235 275 338 394 452 52210 15.5 22 37 49 66 89 111 146 177 207 255 296 339 39217.5 26 38 65 86 114 152 202 266 320 366 444 534 611 68915 22 32 55 72 96 126 169 223 268 306 370 445 511 57711.5 17.5 26 43 57 76 100 134 177 213 243 295 355 408 459

8.8 13 19 33 43 57 75 101 133 161 182 223 267 306 34516 25 36 52 79 106 139 154 229 287 330 404 476 550 63413.5 21 30 43 66 88 117 128 192 239 276 338 397 460 53011 16.5 24 34 53 70 93 102 153 190 220 268 316 366 422

8.1 12.5 18 26 40 53 70 77 115 143 165 202 237 275 31814 21 32 45 69 86 121 139 209 260 296 354 428 491 55812 17 26 38 58 72 101 116 174 217 248 296 358 410 467

9.4 13.5 21 30 46 57 80 93 139 173 197 236 284 326 3717.1 10 16 23 34 43 60 69 104 130 149 177 215 245 279

19.5 29 40 73 112 120 152 268 322 441 49816.5 24 34 61 93 100 127 224 270 369 41613 19.5 27 48 74 80 101 178 215 294 331

9.8 14.5 20 36 56 60 76 134 161 221 24916.5 25 36 70 86 112 146 287 44813.5 21 30 58 72 93 122 240 37411 17 24 47 57 74 97 192 298

8.2 12.5 17.5 35 43 56 73 143 22459 70 96 119 26149 59 80 99 21939 47 64 79 17429 35 48 59 131

Nom.speedrpm

ansen

B29


QGear unit

VVertical L.S.S.

RRight-angle shafts

D TSize Four stages

4 T



870 111750 19.51460 161160 13

870 9.71750 17.51460 14.51160 11.5

870 8.71750 15.51460 131160 10.5

870 7.81750 141460 11.51160 9.3870 7

1750 12.51460 10.51160 8.3

870 6.21750 111460 9.11160 7.3870 5.4

1750 9.71460 8.11160 6.4870 4.8

1750 8.81460 7.31160 5.8

870 4.41750 7.81460 6.51160 5.2

870 3.91750 71460 5.81160 4.6870 3.5

1750 6.31460 5.21160 4.1870 3.1

1750 5.61460 4.61160 3.7870 2.8

1750 4.91460 4.11160 3.3870 2.5

1750 4.41460 3.71160 2.9870 2.2

1750 3.91460 3.21160 2.6870 1.9

1750 3.51460 2.91160 2.3870 1.75

80

90

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

1000 lbf.in

192 313 436 669 900 1170 1990 2940 4600202 313 462 668 900 1170 2000 3110 4860208 314 470 672 902 1180 2000 3120 5200208 315 472 672 910 1180 2010 3130 5350193 313 458 668 898 1170 1540 2000 3010 3700 4770 5770204 314 470 668 903 1180 1540 2000 3110 3710 5030 6080208 315 471 674 904 1180 1550 2010 3120 3720 5340 6260208 316 472 673 912 1180 1550 2010 3130 3740 5350 6290206 313 469 667 903 1170 1540 2000 2580 3110 3700 4930 6240 6480208 314 470 672 906 1180 1540 2010 2590 3120 3710 5200 6230 6820208 315 471 672 904 1180 1550 2010 2600 3130 3730 5340 6270 7140208 316 473 673 909 1180 1550 2020 2610 3140 3740 5360 6300 7170208 314 470 673 904 1170 1540 2000 2590 3110 3710 4460 5090 6260 7110208 314 471 673 907 1180 1540 2010 2590 3120 3720 4470 5330 6260 7130208 315 472 673 903 1180 1550 2010 2600 3130 3730 4490 5350 6290 7150207 316 473 674 910 1190 1550 2020 2610 3140 3750 4510 5370 6310 7180181 315 470 668 907 1170 1550 2010 2590 3120 3660 4470 5260 6260 7100181 315 472 672 903 1180 1540 2010 2600 3130 3680 4480 5340 6280 7140182 315 472 673 909 1180 1550 2020 2610 3140 3690 4490 5360 6290 7160182 316 474 675 911 1190 1560 2030 2620 3150 3710 4520 5370 6320 7190177 314 471 671 909 1180 1540 2010 2590 3130 3720 4480 5340 6270 7170178 316 472 673 911 1180 1550 2010 2600 3140 3730 4490 5350 6280 7160178 316 472 674 910 1190 1560 2020 2610 3150 3740 4500 5370 6310 7180178 317 473 675 911 1190 1560 2030 2610 3150 3750 4520 5380 6320 7210181 315 471 673 907 1180 1540 2010 2600 3130 3680 4480 5340 6280 7140182 315 472 673 909 1190 1560 2020 2610 3140 3690 4490 5360 6290 7160181 315 474 675 910 1180 1550 2030 2610 3140 3710 4510 5370 6310 7190182 317 475 676 913 1190 1550 2030 2620 3160 3720 4520 5390 6340 7200177 316 472 673 904 1180 1550 2010 2600 3130 3730 4500 5360 6290 7160178 315 473 674 910 1180 1550 2020 2600 3140 3740 4510 5370 6300 7170179 317 473 676 912 1190 1560 2030 2620 3150 3750 4520 5380 6320 7200179 317 475 676 914 1190 1560 2030 2630 3160 3760 4530 5390 6340 7220181 316 473 673 909 1180 1560 2020 2610 3130 3700 4500 5360 6300 7170181 316 473 675 910 1190 1560 2020 2610 3140 3710 4510 5380 6310 7180181 317 474 676 912 1190 1560 2020 2610 3150 3720 4530 5390 6330 7210182 317 475 678 913 1190 1560 2040 2620 3160 3730 4540 5400 6360 7220177 316 473 675 910 1190 1550 2020 2610 3140 3740 4500 5370 6310 7190179 316 474 676 911 1190 1560 2020 2610 3150 3750 4520 5380 6330 7190179 317 475 677 913 1190 1560 2030 2620 3160 3760 4530 5400 6340 7210179 318 476 677 916 1190 1560 2030 2630 3160 3770 4530 5420 6360 7230182 276 413 675 911 1180 1550 2030 2610 3140 3720 4520 5380 6310 7200182 276 414 676 912 1190 1560 2020 2620 3150 3720 4530 5380 6330 7210181 277 415 677 915 1190 1560 2030 2620 3160 3730 4530 5400 6340 7230183 277 414 677 916 1190 1560 2030 2630 3170 3740 4550 5410 6350 7240178 265 391 676 912 1190 1560 2030 2610 3140 3760 4520 5390 6330 7200179 266 391 677 913 1190 1560 2030 2630 3150 3760 4520 5390 6330 7220179 265 392 677 915 1190 1560 2030 2630 3160 3760 4530 5410 6360 7230179 266 391 679 917 1190 1570 2030 2630 3180 3760 4560 5420 6360 7250181 276 414 606 913 1190 1560 1760 2620 3160 3720 4520 5400 6330 7210181 277 415 606 913 1190 1560 1750 2620 3150 3740 4540 5390 6350 7210182 278 414 609 914 1190 1560 1760 2630 3160 3750 4540 5410 6360 7240183 278 416 610 918 1190 1570 1760 2640 3180 3750 4570 5410 6360 7260178 266 392 586 914 1080 1560 1830 2630 3150 3760 4530 5390 6340 7210179 266 392 586 915 1080 1560 1830 2620 3150 3770 4540 5410 6360 7230179 267 393 587 916 1080 1570 1830 2640 3160 3770 4550 5410 6350 7240179 266 394 588 917 1080 1570 1830 2640 3170 3790 4550 5440 6380 7250

277 414 608 996 1560 1750 2160 3740 4530 6340 7220278 416 608 996 1570 1760 2170 3740 4540 6360 7230278 416 607 998 1570 1760 2170 3750 4550 6370 7250278 416 611 998 1570 1760 2180 3760 4550 6400 7280265 392 587 1080 1330 1830 2380 4530 7230265 393 587 1080 1330 1830 2370 4540 7240266 391 588 1080 1330 1830 2380 4570 7250267 393 588 1080 1330 1840 2380 4560 7270

997 1250 1760 2170 4540999 1250 1760 2170 4550

1000 1250 1760 2170 45701000 1250 1770 2180 4570

Nom.speedrpm

ansen

B30


QGear unit

V*Vertical L.S.S.

RRight-angle shafts

C MSize Two stages

2 Pt

hp


iN n1 C D E F G H J K L M

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1



P+tc

120 165 190 250280 420 530 780 830 1050 1200 1250 1650 1800130 180 210 280 250 370 320 340270 410 520 760 870 1050 1250 1300 1900 2000130 180 230 300 340 440 480 510 700 760240 360 470 680 810 970 1200 1250 1800 2000130 180 230 300 380 460 560 600 860 950210 310 410 580 710 850 1100 1150 1650 1800215 240 290 320 500 560 690 690 1570 1570105 140 175 230 180 260230 330 440 640 690 910 1050 1300 1550 1700110 140 190 250 250 340 340 460 480 490220 320 420 620 700 910 1100 1300 1650 1900110 145 190 250 290 380 440 550 660 740200 280 380 550 640 830 1000 1200 1550 1800105 140 190 240 300 390 480 590 750 860165 240 320 460 560 720 890 1100 1400 1600180 200 240 270 420 470 580 580 1300 130085 110 145 190 170 220 210 280 280 310

180 260 350 510 560 680 840 980 1300 140086 110 150 200 210 260 300 370 450 500

170 250 340 490 560 680 850 1000 1300 150084 110 150 200 230 290 350 420 560 620

150 220 300 430 510 610 780 910 1200 135079 105 150 200 240 290 380 440 600 680

125 180 250 370 440 530 690 790 1100 1200

180 200 240 270 420 470 580 580 1300 1300

P+tc

P+tc

P+tc

6.3

9

10

14

16

25

Applies only for standard shaft arrangement CU.For shaft arrangement CD, multiply these thermal power ratings by a factor 0.55 (without extra cooling) or 0.83 (with extra cooling).*

ansen

B31


QGear unit

VVertical L.S.S.

RRight-angle shafts


3 / 4 Pt

hp


iN n1 D E F G H J K L M N P Q R S T1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -

1750 -1460 -1160 -870 -



P+tc

80

125



-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

-1750 1

-1460 1

-1160 1

-870 1

84 110 140 185 280 310 330 350 380 410 350 360160 210 270 400 570 620 810 860 1050 1150 1290 1340 1340 1410 1480

83 110 145 190 280 310 340 360 430 460 470 500150 200 260 390 550 600 780 830 1050 1100 1330 1410 1540 1610 174079 105 140 190 280 300 340 360 460 490 540 580 550 580 620

130 180 230 350 480 530 690 730 940 1000 1210 1270 1480 1610 168073 99 130 180 260 290 330 350 460 480 560 600 700 740 780

110 150 200 300 410 450 580 620 810 860 1050 1110 1410 1480 154090 88 135 155 470 490 490 490 1100 110066 86 115 150 220 260 280 320 360 390 400 430 440

120 160 210 310 440 520 660 750 910 1000 1150 1230 1340 1310 1410 148064 84 115 150 220 260 290 320 380 430 460 500 540 420 440 460

115 150 200 300 420 500 630 720 880 1000 1140 1230 1340 1410 1540 161060 80 110 145 210 260 280 320 390 440 480 520 590 550 590 630

100 130 180 260 370 440 550 630 780 890 1030 1110 1250 1310 1410 154055 75 100 140 200 240 270 310 380 440 480 540 600 620 670 72083 110 150 220 310 370 470 540 670 760 890 950 1070 1170 1270 134070 69 105 120 360 380 380 380 870 87054 74 97 125 180 220 240 270 290 330 360 400 440 270 300 34099 135 180 250 360 420 540 610 700 810 940 1020 1110 1130 1220 129051 71 95 125 180 210 230 270 300 350 390 430 470 390 430 47093 130 170 240 340 400 510 580 680 780 930 990 1100 1180 1260 134048 67 91 120 170 200 230 260 310 360 400 440 480 470 520 55079 110 145 210 300 350 450 500 600 690 830 890 980 1090 1170 123044 62 83 110 160 190 210 240 300 340 400 440 480 510 560 59065 92 120 175 250 290 370 420 510 590 710 760 830 950 1030 1090

63 62 95 105 330 350 340 350 780 780

P+tc

P+tc

P+tc

20

31.5

35.5

56

63

100

140

250

280

500

65 85 120 170 200 180 200 250 240 370 400 430 520 560 60063 82 115 165 190 185 210 260 260 370 400 420 520 550 59059 77 110 155 180 190 210 270 270 360 390 420 500 540 57054 70 99 145 170 180 200 260 260 340 370 390 480 520 54051 79 89 273 288 286 288 653 65353 65 89 130 150 150 170 220 230 290 320 370 430 460 50052 62 85 120 145 150 170 220 240 290 320 370 420 450 49049 58 80 115 135 150 170 210 240 280 310 360 410 440 48046 53 74 105 125 140 160 200 230 260 290 340 380 410 45044 68 77 234 247 245 247 559 55944 54 72 100 120 120 135 180 200 250 260 290 360 380 41042 51 70 97 110 120 130 175 200 240 260 280 350 370 39040 48 66 91 105 115 125 170 190 230 240 270 330 350 37038 44 61 84 97 105 115 155 175 210 230 250 300 320 34039 60 67 204 216 215 216 489 489

P+tc

P+tc

P+tc

Refer to us


P+tc

ansen

B32

Exact ratios iex and moments of inertia WR2 in lb.in2

QGear unit

H / VLow speed shaft

PParallel shafts

A TSize Stages

2 4

Gear unit sizeA B C D E F G H J K L M N P Q R S T

iexWR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.4

25

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

112

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

560

630

6.3508 6.3226 6.2296 6.4156 6.1875 6.4699 6.4699

7.3055 7.0664 7.1594 7.2524 7.1188 7.0074 7.1198 7.0141 7.0141 6.9308

8.0208 7.8519 7.7364 7.9673 7.6261 7.9849 8.2755 8.1620 7.7173 7.8044 7.9769

9.2266 8.7756 8.8911 9.0065 8.7738 8.6483 9.1068 8.7106 8.69 8.7106 8.6935 8.9806

9.9293 9.9130 9.7673 10.059 9.7903 10.326 10.421 10.44 9.5839 9.6921 9.7802 10.336 9.9385

11.422 11.079 11.225 11.371 11.264 11.183 11.468 10.997 10.80 10.997 10.796 10.937

12.349 12.522 12.54 12.73 12.176 13 12.594 13.147 12.1 12.236 12.146 12.587 12.878

14.206 13.995 14.412 14.39 14.009 14.08 13.859 14.247 13.63 14.247 13.63 14.341

15.969 15.789 15.557 16.461 15.745 16.036 16.047 15.888 15.675 15.852 15.334 16.506 15.683

18.369 17.647 17.879 18.608 18.115 17.368 17.659 17.516 17.66 17.997 17.658 17.446

19.95 19.5 19.969 20.069 19.671 20.059 20.566 20.244 19.272 20.024 19.865 20.079 20.565

22.949 21.794 22.949 22.686 22.631 21.725 22.632 21.633 21.71 22.483 22.306

25.945 23.801 25.017 25.094 25.017

19.758 19.712 19.422 20.001 19.654 19.711 19.874

22.728 22.031 22.32 22.61 22.613 23.216 22.85 21.687 22.686 22.113 22.663

24.954 24.479 24.119 24.839 24.224 25.114 25.144 24.75 25.475 25.235 24.783 24.96 24.988 25.217 25.452

28.705 27.359 27.719 28.079 27.87 28.894 28.652 28.92 28.034 27.77 27.268 28.524 28.265 27.803 28.495 28.32

30.891 30.905 30.451 31.36 31.099 30.953 31.032 31.33 32.585 31.945 30.778 31.384 31.098 31.032 31.706 32.002

35.535 34.541 34.996 35.45 35.779 35.611 37.05 35.70 35.858 35.154 33.863 35.423 35.538 34.528 35.387 35.608

38.42 39.038 39.096 39.687 38.678 39.737 40.128 38.66 41.033 40.86 38.857 38.974 39.101 39.178 39.374 39.742

44.196 43.631 44.931 44.864 44.499 45.718 46.647 46.16 45.155 44.965 42.752 44.722 44.134 43.592 44.676 44.22

49.681 49.226 48.502 51.319 50.014 49.422 50.522 49.996 49.588 51.455 50.338 49.206 48.558 50.754 49.71 50.175

57.149 55.017 55.741 58.013 57.541 56.86 57.542 58.118 54.569 56.623 55.385 57.937 55.72 56.473 57.877 55.829

63.093 64.977 62.152 65.036 62.483 63.907 62.322 62.946 63.185 62.182 61.891 63.745 61.305 64.113 64.399 65.001

72.51 73.452 71.506 70.439 71.887 73.525 71.975 71.691 69.532 68.428 68.096 71.234 72.183 71.337 73.111 72.325

78.824 80.246 79.775 79.29 81.304 79.839 77.954 77.647 79.096 79.231 76.436 78.375 79.42 80.097 81.349 82.109

90.588 90.713 91.782 88.107 89.471 91.856 86.487 89.674 91.107 87.19 84.099 87.973 88.75 89.122 91.339 91.361

101.17 97.835 99.664 99.179 104.2 95.158 97.124 101.37 96.793 97.647 101.63 102.58

116.28 110.6 114.66 107.42 114.67 106.81 113.82 109.61 114.14

100.28 98.801 100.74 98.175 97.896 100.75 95.382 97.044 101.24 103.39

112.07 113.55 113.88 112.95 112.51 112.95 111.05 109.74 111.65 109.65 116.52 115.04 117.9

124.14 122.31 127.18 123.95 125.45 122.34 125.53 124.11 119.61 121.65 126.2 127.74 131.18 132.41

138.74 140.56 143.77 142.6 144.33 142.6 140.73 136.58 137.61 133.84 140.01 145.17 145.32 145.67 147.33

163.85 152.12 160.65 159.13 158.38 154.45 152.42 159.34 155.63 157.31 154.05 157.23 164.46 165.71 163.6

185.23 174.82 181.6 183.09 182.21 180.47 177.67 175.34 171.27 173.08 181.05 174.44 182.99 187.55 186.11

203.79 196.7 202.57 197.42 203.34 195.46 192.43 198.17 199.8 198.05 199.2 191.93 198.75 208.68 206.02

230.37 226.06 229 227.14 233.94 233.36 224.85 218.08 219.87 217.91 227.95 225.57 221.14 226.64 226.24

248.46 245.74 250.18 253.4 252.26 252.75 243.53 256.25 248.5 244.31 250.8 248.19 253.24 252.18 248.97

280.86 282.42 282.81 291.54 290.23 284.51 290.75 281.99 273.46 268.8 281.19 284 281.78 288.79 283.22

321.27 314.9 317.05 316.58 323.79 308.15 314.90 320.14 321.33 305.59 309.37 312.47 324.57 321.33 317.24

363.18 362.3 343.39 364.23 372.53 355.88 354.47 352.29 353.61 336.22 351.72 350.33 361.14 370.12 360.88

401.37 404.19 386.54 411.94 404.52 385.44 383.92 400.75 401.44 377.4 386.97 385.45 405.49 411.83 415.68

453.73 465.03 429.52 453.32 465.4 427.63 443.39 461.61 441.76 415.24 434.37 438.20 451.18 462.4 462.51

504.97 483.50 527.96 519.68 528.13 480.22 513.62 502.21 477.91 482.13 514.5 519.31

580.97 523.66 581 581.07 530.02 576.7 572.14 541.18 577.83

666.05 608.32 641.68 643.65 595.43

42 87 190 370 730 1400 2800

39 83 180 350 680 1400 2700 6000 13000 36000

31 66 140 280 550 1100 2000 3300 5700 12000 39000

29 63 130 270 530 1100 2000 4500 6900 9700 16000 26000

24 50 110 210 410 810 1500 2400 4300 9200 14000 27000 44000

23 48 100 210 390 790 1500 3300 5100 7100 11000 20000

18 39 82 160 320 620 1200 1700 3200 6800 11000 21000 31000

18 38 79 160 300 610 1200 2400 3700 5100 8200 14000

14 31 65 130 240 500 940 1400 2300 4900 7600 15000 23000

14 30 64 120 230 490 920 1900 2600 3900 5700 11000

12 26 52 100 190 390 730 1000 1800 3800 5400 12000 16000

11 25 51 100 190 390 720 1500 2000 3000 4300

780 1500 2900 4100 12000

46 96 200 410 800 9700 22000

42 90 190 380 730 1600 2400 9000 10000 20000 23000

33 72 150 310 600 840 1500 2200 3200 4700 6900 9300 15000 21000 24000

31 68 140 290 560 770 1200 1700 3000 4400 6500 7100 11000 14000 16000 21000

26 53 110 230 440 630 1200 1600 2300 3300 5100 6700 9900 11000 15000 16000

24 51 110 220 410 580 870 1300 2200 3100 4900 5300 7600 10000 11000 15000

20 41 83 170 330 450 840 1200 1700 2400 3800 5000 7000 7900 11000 12000

19 40 80 170 320 420 660 900 1600 2300 3600 3900 5600 7400 8100 11000

15 32 65 130 250 350 640 860 1300 1700 2700 3700 5200 5600 7600 8400

14 31 63 130 240 330 520 680 1300 1700 2600 2800 4000 5300 5700 7800

14 31 63 130 200 260 510 660 1000 1400 2200 2700 3800 4100 5400 5800

14 31 63 130 190 240 410 530 970 1300 2100 2200 2900 4000 4200 5500

12 26 50 110 190 200 400 520 970 1000 1700 2100 2800 3200 4000 4300

12 26 50 120 190 190 400 420 750 1000 1700 1700 2300 3100 3200 4100

11 25 48 100 180 400 410 740 1700 2200 3100 3300

11 25 48 100 180 390 720 1800 3100

26 31 69 150 160 300 630 830 1300 2600

26 30 68 140 150 300 320 580 750 1200 1300 2500 2600

21 24 52 110 150 300 300 580 640 1200 1200 2200 2500 2700

20 23 51 110 140 220 300 570 590 1200 1200 1300 2200 2300 2600

20 18 40 83 110 220 300 420 580 870 1200 1200 1700 2200 2300

20 18 40 82 110 170 230 420 580 860 880 1200 1600 1700 2200

16 14 32 66 84 170 220 330 430 670 870 1200 1300 1600 1700

16 13 31 66 83 130 170 320 420 660 670 890 1300 1300 1400

16 11 26 53 67 130 170 240 330 530 660 880 980 1300 1300

16 11 26 52 66 110 130 240 330 530 530 680 960 980 1300

12 11 26 51 53 110 130 190 250 420 530 670 740 970 980

12 11 26 50 53 100 110 190 240 420 420 540 730 740 970

10 10 25 51 51 100 110 190 190 400 420 530 700 730 740

10 10 26 50 51 100 100 180 190 400 400 420 700 700 740

10 25 50 51 100 100 180 190 400 420 700 700

10 25 50 100 100 180 180 400 700

50 100 180 180 400

iN

ansen

B33

Three stagesiN: nominal ratio The moment of inertia WR2 of the gear unit components relate to the high speed shaft.

Gear unit sizeA B C D E F G H J K L M N P Q R S T

iexWR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2iex

WR2

6.2171 6.2857 6.2701 6.4572 6.1765 6.4323 6.4063

7.1517 7.0252 7.2059 7.2995 7.1061 6.9667 7.0498 7.1317 6.9521

7.875 8 7.8824 8.1176 7.7647 8.3097 7.9484 8.0817 7.8466 7.7354

9.0588 8.9412 9.0588 9.1765 8.9333 9 8.7468 8.905 9.0599 8.8393 9.0457 8.6167

9.975 10 9.737 10.266 9.7059 10.263 10.359 10.027 9.9681 10.145 10.065 9.6938

11.475 11.176 11.19 11.606 11.167 11.116 11.4 11.049 11.199 11.229 11.19 11.212

12.375 12.571 12.387 12.718 12.165 12.949 12.904 13.069 12.322 12.888 12.451 12.613

14.235 14.05 14.235 14.376 13.996 14.025 14.201 14.4 14.096 13.881 14.013 13.87

15.422 16 15.765 16.235 15.529 16.25 15.96 16.279 15.509 15.932 15.592 15.603

17.74 17.882 18.118 18.353 17.867 17.6 17.563 17.938 18.067 17.471 17.454 17.368

20.134 19.878 20.051 19.421 19.539

22.185 22.393 21.633

25.701 24.338

19.342 19.597 19.548 20.131 19.619

22.25 21.902 22.465 22.757 22.572 23.081

24.5 24.941 24.574 25.308 24.664 25.069 24.998 25.225 25.199 24.767

28.183 27.875 28.242 28.609 28.376 28.842 29.817 28.756 27.758 27.725 29.002 27.557 28.243

31.033 31.176 30.357 32.007 30.83 31.516 32.294 31.145 31.297 31.631 32.012 31.91 32.225 31.425 31.719

35.698 34.844 34.887 36.182 35.471 36.259 36.827 37.149 34.441 34.808 35.221 36.844 36.134 35.856 36.748 35.293

38.5 39.193 38.617 39.649 38.641 39.394 39.886 40.235 40.79 39.245 39.571 40.537 39.756 39.865 40.889 41.271

44.288 43.804 44.381 44.821 44.456 45.324 46.465 45.882 44.888 43.187 43.538 45.544 45.903 44.357 45.46 45.921

47.979 49.882 49.149 50.616 49.329 49.374 50.325 49.694 50.811 51.149 49.804 50.11 50.505 49.922 50.583 51.055

55.192 55.751 56.484 57.218 56.753 56.805 58.309 57.891 55.915 56.288 54.797 57.322 56.744 55.547 56.928 56.808

60.933 65.843 62.98 64.145 64.188 63.031 63.153 62.700 62.842 63.716 63.837 63.069 62.432 62.18 63.343 63.935

70.027 74.431 72.459 69.474 70.635 72.518 70.066 72.647 69.154 70.116 70.236 73.472 71.418 69.187 70.908 71.139

78.21 80.275 78.682 80.234 82.266 77.09 78.682 78.667 78.802 80.838 78.577 78.897 79.635

89.884 90.745 90.524 86.9 90.529 86.531 88.327 86.717 91.539 88.608

95.206 98.28 100.72

77.725 76.582 80.644 79.567 79.341 81.658 77.251 81.551 80.035

86.869 88.012 91.163 91.543 91.183 91.543 89.999 88.878 88.326 93.861 89.863 91.268

98.452 97.004 102.64 100.03 101.67 99.149 101.74 100.52 96.871 97.995 101.66 101.1 102.47 102.5

110.03 111.48 116.03 115.08 116.97 115.08 114.05 110.62 111.45 107.82 112.79 116.94 112.49 112.77 115.09

129.95 122.87 128.3 123.56 127.81 124.64 123.53 126.37 126.05 126.6 124.09 126.66 125.44 128.28 126.65

146.9 141.21 145.03 142.16 147.05 145.55 143.38 139.06 138.71 139.29 145.7 140.52 139.57 143.04 144.07

158.44 152.44 161.29 157.19 157.89 157.64 155.29 157.96 158.46 156.36 160.31 154.61 159.91 159.16 157.13

179.1 175.19 182.33 180.84 181.65 180.3 181.34 173.83 174.38 177.82 179.96 181.53 181.91 182.36 178.75

200.69 189.97 205.28 200.06 200.85 195.28 196.40 197.98 198.08 197.28 198 199.73 203.65 206.42 204.8

226.86 218.32 232.05 230.16 231.08 230.17 224.63 217.87 217.98 217.06 227.06 224.21 226.6 227.16 231.83

248.97 243.43 260.14 249.93 255.63 249.29 243.29 252.74 248.26 247.57 249.82 246.69 251.87 258.4 255.11

281.45 280.06 281.75 287.55 294.1 287.9 286.76 278.13 273.2 272.38 284.93 282.89 280.25 287.22 290.21

310.27 312.45 317.16 325.22 319.36 311.82 310.59 316.38 316.93 305.74 313.5 311.25 314.67 319.58 315.52

350.74 359.48 343.51 357.89 367.42 345.95 358.69 364.43 348.76 336.39 351.89 355 350.12 358.83 358.92

390.35 396.71 416.81 410.27 380.63 388.49 405.49 396.48 387.17 390.59 399.26 402.99

449.1 429.67 458.68 427.25 428.78 455.29 451.69 438.43 448.4

525.83 470.08 492.13 506.59 508.15 482.38

42 92 190 400 730 1400 3500

40 88 180 380 680 1300 3400 7800 21000

33 69 150 300 600 1000 2400 4000 7600 21000

31 66 140 290 570 1000 2300 3800 5200 8700 13000 24000

24 54 100 200 380 690 1500 2700 5100 7900 13000 23000

23 52 100 190 360 670 1400 2500 3600 5800 9100 15000

18 40 72 140 250 450 1000 1700 3500 5300 8800 14000

17 38 69 140 240 440 1000 1600 2400 4000 5900 10000

14 32 56 110 180 330 800 1200 2400 3700 5700 9600

14 31 54 110 180 320 780 1100 1800 2700 4300 6600

880 1800 2500 4200 6300

840 1900 4700

1800 4500

47 100 210 440 800

43 95 190 410 730 1500

36 74 160 320 640 840 1500 3900 8600 24000

33 71 150 300 600 770 1100 1600 3700 8200 8800 23000 24000

26 57 110 210 410 670 1100 1500 2600 4100 5700 8400 15000 23000 25000

25 55 100 200 380 630 750 1200 2500 3900 5500 5800 9200 14000 15000 24000

19 42 76 150 270 430 720 1100 1600 2700 3900 5600 8700 10000 14000 16000

18 40 72 150 260 400 490 780 1600 2600 3800 4000 6100 9700 10000 15000

15 33 58 120 190 280 470 740 1100 1700 2600 3800 5800 6700 9900 11000

14 32 56 110 180 260 360 510 1100 1600 2500 2700 4200 6400 6800 10000

14 32 56 110 180 200 350 490 850 1200 1900 2600 4000 4900 6500 7000

14 32 56 110 180 190 350 370 830 1100 1900 2000 2800 4700 5000 6600

13 31 53 110 170 340 360 820 890 1900 2700 4800 5100

13 31 53 110 170 320 780 850 2000 4900

320 770 1900

31 42 91 180 180 390 780 1500 4200

31 41 89 180 170 390 390 700 1400 1400 3800 3900

25 32 67 140 170 390 360 700 800 1400 1400 3600 3500 4000

24 31 66 130 160 290 360 690 720 1400 1300 1500 3600 3300 3600

24 24 52 98 140 280 360 560 710 1000 1300 1400 2500 3300 3400

24 24 51 97 130 190 290 550 700 1000 1000 1400 2500 2500 3300

24 18 39 70 100 190 290 360 560 680 1000 1300 1600 2500 2500

24 18 39 69 98 140 190 360 550 460 690 1000 1600 1600 2500

18 14 32 55 71 140 190 250 370 460 680 1000 1200 1200 1600

18 14 31 54 69 110 140 240 360 450 460 700 1200 1200 1300

14 14 31 52 55 110 140 180 250 340 460 690 950 1200 1200

14 14 31 51 55 100 110 180 240 340 350 470 940 950 1200

11 13 30 51 52 100 110 180 180 320 340 460 890 940 960

11 13 30 51 52 100 110 160 180 310 320 350 880 890 950

13 30 51 52 100 100 160 180 310 350 880 890

13 30 51 100 100 160 170 320 880

51 100 100 160 160 320

Exact ratios iex and moments of inertia WR2 in lb.in2

QGear unit

H / VLow speed shaft

RRight-angle shafts

A TSize Stages

2 4

iN: nominal ratio The moment of inertia WR2 of the gear unit components relate to the high speed shaft. Three stages

6.3

7.1

8

9

10

11.2

12.5

14

16

18

20

22.5

25

20

22.4

25

28

31.5

35.5

40

45

50

56

63

71

80

90

100

80

90

100

112

125

140

160

180

200

224

250

280

315

355

400

450

500

iN

ansen

B34

ARRANGEMENTS WITH MOTORS

Horizontal low speed shaft

M1

Lantern housings (3 or 4 stages only)

Motor base

M3 M7

Bed plates

M10

Adjustable motor platform (3 or 4 stages only)

Lantern housings (p. C22/C25/C26)

M4 M2

Vertical low speed shaft

M12

Adjustable motor platform

M5

Scoop (3 or 4 stages only)

M6

M8

Scoop (3 or 4 stages only)

ansen

B35

DIMENSIONAL DRAWINGSIndex

Page

A H 2 C1

J Q 2 C2

C H 3 C3

J T 3 C4

C5

D H 4 C7

Parallel shafts J T 4 C8

A H 2 C9

J M 2 C10

C H 3 C11

J T 3 C12

D H 4 C13

Right-angle shafts J T 4 C14

C F 2 C21

C22

C H 3 C23

J T 3 C24

C25-C26

D H 4 C27

Parallel shafts J M 4 C28

C F 2 C29

G M 2 C30

C H 3 C31

J T 3 C32

D H 4 C33

Right-angle shafts J T 4 C34

C35

H

V

Q

Motor-reducer

Motor-reducer

P

R

R

• Cooling coil

• Options

• Dipstick & magnetic plug (removal)

• Shrink disc connection

• Keyed connection

• Cooling coil • Options

Code Q 2 3Size Stages

1

Horizontalapplications

Verticalapplications

Hansen P4gear unit

4 5

Motor-reducer

P

ansen

C15

C16C18

C19-C20

C

RL TRTLTTLTRTLLRRLR1 2 12 1 2

97QU-HP200003Z A inch

QGear unit

HHorizontal L.S.S.

PParallel shafts

A HSize

The user is responsi-ble for the provisionof safety guards and correct installation ofall equipment. Certified dimensionsupon request.

Two stages2

(1) Fixation point forthe torque armTorque arm atsame side as support-ing bearing

(2) Shaft tolerances :as per ISO 286-2

Keys in shaft extensions as perDIN 6885 T1.

Shafts are always supplied with keys attached.

Note :Standard inch lowspeed shaft ends areavailable upon re-quest

Shaft arrangements (top view)

1 = standard shaft extension2 = additional shaft extension

X

Y

D

Z ZB DIN 332

"D"DB

YB

XB

viewed from

D

GS

GS

6xTS

L DT

JT

J

JB

LB

DB

FS

CBFT FU

K

LZ

LS

JZ

DQ

U

LR

DN

LP

LN

JB

JF

RF

RF

C

FP

RM

E F

RM

FP

A

CU CV

(1)

H TR

GP

B

G G GP

4xT

H

HF

(1)

Type A B C CB CU CV E F FP FS FT FU G GP GS H J JB JZ K RM T TR TSWeight

lbOil

US gal

QHPA2 12.20 9.61 18.90 10.118 8.66 14.49 7.68 9.25 0.98 5.12 8.66 8.66 3.94 0.87 2.66 6.10 13.07 10.71 6.38 5.98 2.76 0.75 0.91 M12 420 1.58QHPB2 13.78 10.87 20.87 11.693 9.06 17.09 7.87 10.63 1.18 5.51 10.04 10.04 4.33 1.10 3.15 6.89 13.70 11.34 7.01 6.69 3.15 0.94 1.06 M14 600 2.65QHPC2 15.75 12.20 23.03 13.583 9.65 19.17 8.27 12.01 1.38 5.91 10.91 11.42 4.72 1.38 3.35 7.87 15.94 12.01 7.68 7.36 3.74 1.10 1.26 M16 750 3.69QHPD2 17.72 13.78 25.98 15.630 11.02 21.77 9.65 13.58 1.38 7.09 13.39 12.72 5.51 1.38 3.94 8.86 17.13 14.17 8.66 8.27 3.74 1.10 1.38 M16 1080 5QHPE2 20.87 15.75 29.53 18.071 12.60 25.08 11.02 15.35 1.57 7.87 16.34 13.78 6.30 1.57 4.41 10.43 19.88 15.16 9.65 9.33 4.13 1.38 1.57 M16 1650 8.2QHPF2 24.02 18.11 33.66 20.669 14.17 28.35 12.40 17.72 1.77 8.66 18.50 15.35 7.28 1.77 5.12 12.01 21.26 16.34 10.83 10.75 4.53 1.38 1.77 M20 2310 13QHPG2 29.92 21.65 37.99 23.740 15.75 32.80 13.78 20.28 1.97 9.45 19.17 19.17 8.86 1.97 6.30 14.76 25.00 19.09 12.40 12.32 5.12 1.65 2.36 M20 3310 24QHPH2 29.92 21.65 42.80 26.575 17.72 35.63 15.75 23.11 1.97 11.42 24.02 19.17 8.86 1.97 6.30 14.76 26.97 19.09 12.60 12.32 5.12 1.65 2.36 M20 4850 23

Type Solid D -m6 L X Y Z DQ LS LZ

Umax DB LB XB YB ZB

DNmax LN LP

LRmin RF JF HF DT JT

QHPA2 3.1496 6.69 0.87 3.35 M20 3.386 1.18 15.67 7.87 1.4961 k6 4.33 0.39 1.61 M12 5.71 3.35 1.46 0.79 5.51 8.82 12.80 5.20 9.17QHPB2 3.5433 6.69 0.98 3.74 M24 4.016 1.18 17.09 9.06 1.6535 k6 4.33 0.47 1.77 M16 5.71 3.35 1.46 0.79 6.30 9.45 14.37 5.20 9.88QHPC2 4.1339 8.27 1.10 4.37 M24 4.528 1.18 18.66 9.84 1.8898 k6 4.33 0.55 2.03 M16 6.30 3.35 1.85 0.79 6.69 10.51 16.34 5.98 10.67QHPD2 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 2.2835 m6 5.51 0.63 2.44 M20 6.30 4.53 1.85 0.79 7.09 11.50 18.39 6.89 12.83QHPE2 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 2.5591 m6 5.51 0.71 2.72 M20 8.27 4.53 2.83 1.18 8.07 13.46 21.54 7.40 14.17QHPF2 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 2.9528 m6 5.51 0.79 3.13 M20 8.27 4.53 2.83 1.18 8.86 14.65 24.80 8.43 15.39QHPG2 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 3.3465 m6 6.69 0.87 3.54 M20 11.02 5.71 4.09 1.57 10.63 17.48 30.71 9.65 17.13QHPH2 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 3.3465 m6 6.69 0.87 3.54 M20 11.02 5.71 4.09 1.57 10.63 17.48 30.71 9.65 17.13

Backstop

Hollow

FanShafts (2)

C1

ansen

97QU-HP200022Z Ainch

QGear unit

HHorizontal L.S.S.

PParallel shafts

J QSize


Two stages2

ZB DIN 332

"D"DB

YB

XB

(1) 4 x jacking screw






X

Y

D

Z

JT

LB

J

JB

D

DTL

GS

GS

K

FS6xTS

FT

DB

FU

CB

RM RM

E FFP FP

C

A

CU CV

(1)

H

HF

GP GPG G

B

4xT

TRH



Type A B C CB CU CV E F FP FS FT FU G GP GS H J JB JZ K RM T TR TSWeight

lbOil

US gal

QHPJ2 35.83 25.20 46.26 28.189 19.29 38.19 14.37 24.41 3.74 11.54 22.83 21.65 10.63 1.97 7.48 17.72 28.94 22.64 14.57 14.33 7.48 1.65 2.36 M24 5950 40QHPK2 35.83 25.20 51.30 31.260 21.26 41.26 16.34 27.48 3.74 13.50 27.87 21.65 10.63 1.97 7.48 17.72 31.50 22.64 14.76 14.53 7.48 1.65 2.36 M24 6830 44QHPL2 44.49 30.31 55.51 33.386 22.64 44.69 16.93 29.53 4.53 13.78 27.56 25.20 12.99 2.17 8.86 22.05 33.86 25.39 17.32 17.91 9.06 1.89 2.76 M24 8820 75QHPM2 44.49 30.31 62.32 37.244 25.59 48.54 19.88 33.39 4.53 16.73 34.37 25.20 12.99 2.17 8.86 22.05 36.22 25.39 17.32 17.91 9.06 1.89 2.76 M24 10580 88QHPN2 55.51 33.46 63.90 41.260 25.59 54.45 19.29 34.37 5.12 15.55 36.22 22.83 14.37 2.36 9.74 27.56 37.80 29.33 19.09 19.29 10.24 2.20 2.76 M30 15210 92QHPP2 55.51 33.46 68.86 43.858 27.95 57.05 21.65 36.97 5.12 17.91 41.18 22.83 14.37 2.36 9.74 27.56 40.16 29.33 19.09 20.08 10.24 2.20 2.76 M30 16750 100QHPQ2 55.51 33.46 77.17 48.622 31.50 61.81 25.20 41.73 5.12 21.46 49.49 22.83 14.37 2.36 9.74 27.56 41.73 29.33 19.09 20.08 10.24 2.20 2.76 M30 19620 108

Type SolidD -m6 L X Y Z ZZ DQ LS LZ

Umax

DB -m6 LB XB YB ZB

DNmax LN LP


QHPJ2 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 3.9370 8.27 1.10 4.17 M24 11.02 7.28 4.09 1.57 11.22 19.45 36.69 10.24 21.46QHPK2 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 3.9370 8.27 1.10 4.17 M24 11.02 7.28 4.09 1.57 11.22 19.45 36.69 10.24 21.46QHPL2 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 4.7244 8.27 1.26 5.00 M24 11.02 7.28 4.09 1.57 12.40 22.20 45.51 11.61 24.13QHPM2 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 4.7244 8.27 1.26 5.00 M24 11.02 7.28 4.09 1.57 12.40 22.20 45.51 11.61 24.13QHPN2 11.8110 18.50 2.76 12.36 3xM24 5.512 12.992 1.97 46.10 26.57 5.9055 9.84 1.42 6.22 M30 11.02 8.86 4.09 1.57 13.39 24.57 56.69 13.07 26.65QHPP2 12.5984 20.08 2.76 13.15 3xM24 5.512 13.780 1.97 46.89 28.15 5.9055 9.84 1.42 6.22 M30 11.02 8.86 4.09 1.57 13.39 24.57 56.69 13.07 26.65QHPQ2 13.3858 21.65 3.15 13.98 3xM24 9.843 14.567 1.97 47.20 30.12 5.9055 9.84 1.42 6.22 M30 11.02 8.86 4.09 1.57 13.39 24.57 56.69 13.07 26.65

Hollow

FanShafts (2) Backstop

viewed from

Z X

Y

DZZ

ansen

C2

LZ

LS

JZ

DQ

U

LR

DN

LP

LN

JB

JF

RF

RF


QGear unit

HHorizontal L.S.S.

PParallel shafts

C HSize


Three stages3

(1) Fixation point forthe torque arm






X

Y

D

ZZCDIN332"D"

DC

YC

XC

D

DT

JT

J

L

GS

GS

6xTS

FS

FT FU

CC

CK

DC

LC

JCK

ULS

LZ

JZ

DQ

JF

JCLP

LN

DNLR

RF

RF

CU CV

RM

C

FPFERM

FP

A

FR (1)

H TR

GP G G GP

4xT

H

HF

B

(1)


Shaft arrangements (top view) viewed from

Type SolidD -m6 L X Y Z DQ LS LZ

Umax DC LC XC YC ZC

DNmax LN LP


QHPC3 4.1339 8.27 1.10 4.37 M24 4.528 1.18 18.66 9.84 1.4961 k6 4.33 0.39 1.61 M12 6.30 3.35 1.77 0.79 6.30 9.13 16.34 5.20 9.17QHPD3 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 1.6535 k6 4.33 0.47 1.77 M16 6.30 3.35 1.77 0.79 6.30 9.76 18.39 5.20 9.88QHPE3 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 1.8898 k6 4.33 0.55 2.03 M16 6.30 3.35 1.77 0.79 6.30 10.43 21.54 5.98 10.67QHPF3 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 2.2835 m6 5.51 0.63 2.44 M20 8.27 4.53 2.76 1.18 8.07 12.40 24.80 6.89 12.83QHPG3 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 2.5591 m6 5.51 0.71 2.72 M20 8.27 4.53 2.76 1.18 8.07 13.39 30.71 7.40 14.17QHPH3 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 2.5591 m6 5.51 0.71 2.72 M20 8.27 4.53 2.76 1.18 8.07 13.39 30.71 7.40 14.17

Hollow

Fan BackstopShafts (2)

Type A B C CC CK CU CV E F FP FR FS FT FU G GP GS H J JC JZ K RM T TR TSWeight

lbOil

US gal

QHPC3 15.75 12.20 23.03 17.874 6.77 9.65 22.24 8.27 12.01 1.38 20.47 5.91 12.80 12.80 4.72 1.38 3.35 7.87 15.94 10.71 7.68 7.36 3.74 1.10 1.26 M16 770 4.22QHPD3 17.72 13.78 25.98 20.591 7.83 11.02 25.98 9.65 13.58 1.38 24.02 7.09 15.16 15.35 5.51 1.38 3.94 8.86 17.13 11.34 8.66 8.27 3.74 1.10 1.38 M16 1100 6.6QHPE3 20.87 15.75 29.53 23.898 9.21 12.60 29.49 11.02 15.35 1.57 27.36 7.87 18.19 16.46 6.30 1.57 4.41 10.43 19.88 12.01 9.65 9.33 4.13 1.38 1.57 M16 1700 10QHPF3 24.02 18.11 33.66 27.402 10.43 14.17 33.54 12.40 17.72 1.77 31.30 8.66 19.69 19.49 7.28 1.77 5.12 12.01 21.26 14.17 10.83 10.75 4.53 1.38 1.77 M20 2430 16QHPG3 29.92 21.65 37.99 31.496 11.93 15.75 38.70 13.78 20.28 1.97 36.14 9.45 22.24 22.24 8.86 1.97 6.30 14.76 25.00 15.16 12.40 12.32 5.12 1.65 2.36 M20 3420 26QHPH3 29.92 21.65 42.80 34.331 11.93 17.72 41.54 15.75 23.11 1.97 38.98 11.42 27.05 22.24 8.86 1.97 6.30 14.76 26.97 15.16 12.60 12.32 5.12 1.65 2.36 M20 4960 28

C3

ansen

Type A B BR C CC CK CU CV E F FP FR FS FT FU G GR GS H J JC JZ K RM T TR TSWeight

lbOil

US gal

QHPJ3 35.83 25.20 19.69 61.61 37.087 13.66 19.29 45.08 14.37 23.35 3.74 30.79 11.54 27.95 23.62 10.63 7.87 7.48 17.72 28.94 16.34 14.57 14.33 7.48 1.65 2.36 M24 5950 42QHPK3 35.83 25.20 19.69 66.65 40.157 13.66 21.26 48.15 16.34 23.35 3.74 35.83 13.50 32.99 23.62 10.63 7.87 7.48 17.72 31.50 16.34 14.76 14.53 7.48 1.65 2.36 M24 6830 52QHPL3 44.49 30.31 22.83 72.44 43.701 15.59 22.64 52.76 16.93 26.50 4.53 36.89 13.78 33.86 27.17 12.99 9.25 8.86 22.05 33.86 19.09 17.32 17.91 9.06 1.89 2.76 M24 9260 78QHPM3 44.49 30.31 22.83 79.25 47.559 15.59 25.59 56.61 19.88 26.50 4.53 43.70 16.73 40.67 27.17 12.99 9.25 8.86 22.05 36.22 19.09 17.32 17.91 9.06 1.89 2.76 M24 11020 87QHPN3 55.51 33.46 26.77 83.74 51.299 17.95 25.59 61.34 19.29 31.10 5.12 42.40 15.55 42.13 27.95 14.37 11.02 9.74 27.56 37.80 22.64 19.09 19.29 10.24 2.20 2.76 M30 15870 140QHPP3 55.51 33.46 26.77 88.70 53.898 17.95 27.95 63.94 21.65 31.10 5.12 47.36 17.91 47.09 27.95 14.37 11.02 9.74 27.56 40.16 22.64 19.09 20.08 10.24 2.20 2.76 M30 17420 149QHPQ3 55.51 33.46 26.77 97.01 58.661 17.95 31.50 68.70 25.20 31.10 5.12 55.67 21.46 55.39 27.95 14.37 11.02 9.74 27.56 41.73 22.64 19.09 20.08 10.24 2.20 2.76 M30 20280 159QHPR3 61.02 38.98 31.89 99.41 61.142 20.79 30.31 72.44 23.23 36.61 5.91 50.98 19.29 51.97 32.28 16.73 13.19 12.40 30.31 45.67 25.39 21.85 22.24 11.81 2.60 3.15 M30 24910 211QHPS3 61.02 38.98 31.89 105.16 64.134 20.79 33.07 75.43 25.98 36.61 5.91 56.73 22.05 57.72 32.28 16.73 13.19 12.40 30.31 48.43 25.39 21.85 23.03 11.81 2.60 3.15 M30 27560 227QHPT3 61.02 38.98 31.89 109.29 67.087 20.79 34.25 78.39 27.17 36.61 5.91 60.87 23.23 61.85 32.28 16.73 13.19 12.40 30.31 48.43 25.39 21.85 23.03 11.81 2.60 3.15 M30 30200 243


QGear unit

HHorizontal L.S.S.

PParallel shafts

J TSize


Three stages3


(2) Fixation point forthe torque arm of sizes J-K-L-M

Fixation point for thetorque arm of sizesN-P-Q-R-S-T: Refer tous






X

Y

D

Z

CCFT FU

FS

6xTS

GS

GS

DC

LC

JC

JT

JDT

L

D

CK

K

LS

LZ

JZ

6xT DQ

GR

GRG

G

LP JC

JF

LN

DNLR

U RF

RF

CU CV

A

RM RM RM

FPE

F FP

(1)

FR

C

(2)

H TR

BR

B

H

HF

(2)




Umax

DC -m6 LC XC YC ZC

DNmax LN LP


QHPJ3 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 2.9528 5.51 0.79 3.13 M20 8.27 4.53 2.83 1.18 8.86 14.65 36.69 8.43 15.39QHPK3 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 2.9528 5.51 0.79 3.13 M20 8.27 4.53 2.83 1.18 8.86 14.65 36.69 8.43 15.39QHPL3 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 3.3465 6.69 0.87 3.54 M20 11.02 5.71 4.09 1.57 10.63 17.48 45.51 9.65 17.13QHPM3 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 3.3465 6.69 0.87 3.54 M20 11.02 5.71 4.09 1.57 10.63 17.48 45.51 9.65 17.13QHPN3 11.8110 18.50 2.76 12.36 3xM24 5.512 12.992 1.97 46.10 26.57 3.9370 8.27 1.10 4.17 M24 11.02 7.28 4.09 1.57 11.42 19.45 56.69 10.24 21.46QHPP3 12.5984 20.08 2.76 13.15 3xM24 5.512 13.780 1.97 46.89 28.15 3.9370 8.27 1.10 4.17 M24 11.02 7.28 4.09 1.57 11.42 19.45 56.69 10.24 21.46QHPQ3 13.3858 21.65 3.15 13.98 3xM24 9.843 14.567 1.97 47.20 30.12 3.9370 8.27 1.10 4.17 M24 11.02 7.28 4.09 1.57 11.42 19.45 56.69 10.24 21.46QHPR3 14.1732 23.62 3.15 14.76 3xM24 9.843 15.748 1.97 53.46 32.68 4.7244 8.27 1.26 5.00 M24 11.02 7.28 4.09 1.57 12.60 22.20 62.20 11.61 24.13QHPS3 14.9606 25.59 3.15 15.55 3xM24 9.843 16.535 1.97 53.54 34.65 4.7244 8.27 1.26 5.00 M24 11.02 7.28 4.09 1.57 12.60 22.20 62.20 11.61 24.13QHPT3 15.7480 25.59 3.54 16.42 3xM24 9.843 17.323 1.97 54.53 37.01 4.7244 8.27 1.26 5.00 M24 11.02 7.28 4.09 1.57 12.60 22.20 62.20 11.61 24.13

Hollow


Z X

Y

DZZ

ansen

ZCDIN332"D"

DC

YC

XC

C4

97QU-HP30K002Z Ainch

QGear unit

HHorizontal L.S.S.

PParallel shafts

C HSize


Three stages3


2) Shaft tolerances :as per ISO 286-2




(3) Max. dimensions

4) To be specified separately

(5) Without motor

(6) Refer to us forcombination of back-stop with additionalshaft extension or fan

1 = standard shaft extension2 = additional shaft extension3 = additional shaft extension(ø=DC)

X

Y

D

Z

ULS

LZ

JZ

DQ

JF

RF

D

DT

JT

L

GS

GS

6xTS FS

FT

FU

CK

LC

K

DM

DC

CC

J

JC

JM

LM

CU CV

RM

C

FPFERM

FP

A

FR (1)

CM

DM

H TR

GP G G GP

4xT

H

HF

B

(1)

RL TRTLLLRRLR RT1 2

LT TT1 212

3 3 3



Umax DC LC XC YC ZC RF JF HF DT JT

QHPC3 4.1339 8.27 1.10 4.37 M24 4.528 1.18 18.66 9.84 1.4961 k6 4.33 0.39 1.61 M12 6.30 9.13 16.34 5.20 9.17QHPD3 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 1.6535 k6 4.33 0.47 1.77 M16 6.30 9.76 18.39 5.20 9.88QHPE3 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 1.8898 k6 4.33 0.55 2.03 M16 6.30 10.43 21.54 5.98 10.67QHPF3 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 2.2835 m6 5.51 0.63 2.44 M20 8.07 12.40 24.80 6.89 12.83QHPG3 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 2.5591 m6 5.51 0.71 2.72 M20 8.07 13.39 30.71 7.40 14.17QHPH3 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 2.5591 m6 5.51 0.71 2.72 M20 8.07 13.39 30.71 7.40 14.17

Hollow

Fan Backstop(6)

Shafts (2)

Type A B C CC CK CU CV E F FP FR FS FT FU G GP GS H J JC JZ K RM T TR TSWeightlb ( 5)

OilUS gal

QHPC3 15.75 12.20 23.03 17.874 6.77 9.65 22.24 8.27 12.01 1.38 20.47 5.91 12.80 12.80 4.72 1.38 3.35 7.87 15.94 10.71 7.68 7.36 3.74 1.10 1.26 M16 770 4.22QHPD3 17.72 13.78 25.98 20.591 7.83 11.02 25.98 9.65 13.58 1.38 24.02 7.09 15.16 15.35 5.51 1.38 3.94 8.86 17.13 11.34 8.66 8.27 3.74 1.10 1.38 M16 1100 6.6QHPE3 20.87 15.75 29.53 23.898 9.21 12.60 29.49 11.02 15.35 1.57 27.36 7.87 18.19 16.46 6.30 1.57 4.41 10.43 19.88 12.01 9.65 9.33 4.13 1.38 1.57 M16 1700 10QHPF3 24.02 18.11 33.66 27.402 10.43 14.17 33.54 12.40 17.72 1.77 31.30 8.66 19.69 19.49 7.28 1.77 5.12 12.01 21.26 14.17 10.83 10.75 4.53 1.38 1.77 M20 2430 16QHPG3 29.92 21.65 37.99 31.496 11.93 15.75 38.70 13.78 20.28 1.97 36.14 9.45 22.24 22.24 8.86 1.97 6.30 14.76 25.00 15.16 12.40 12.32 5.12 1.65 2.36 M20 3420 26QHPH3 29.92 21.65 42.80 34.331 11.93 17.72 41.54 15.75 23.11 1.97 38.98 11.42 27.05 22.24 8.86 1.97 6.30 14.76 26.97 15.16 12.60 12.32 5.12 1.65 2.36 M20 4960 28

Nema motor Hansen P4

QHPC3 QHPD3 QHPE3 QHPF3 QHPG3 QHPH3

CM JM CM JM CM JM CM JM CM JM CM JM

Upon request

Frame DM LM(3)

Coupling(4)

Option lantern housing

C5

ansen

ZCDIN332"D"

DC

YC

XC


QGear unit

HHorizontal L.S.S.

PParallel shafts

D HSize


Four stages4







X

Y

D

Z

CU CV

RM

CFR (1)

RM

FPFEFP

A

6xTS

GS

GS

FS

CD

FT FU

DD

LD

JD

JT

DTJ

L

CB

D

CK

K

ULS

LZ

JZ

DQ

DN

LV

H TR

B

GP G G GP

4xT

HD

(1)

ZD DIN 332

"D"DD

YD

XD



Type A B C CD CK CU CV E F FP FR FS FT FU G GP GS H HD J JD JZ K RM T TR TSWeight

lbOil

US gal

QHPD4 17.72 13.78 25.98 20.591 7.83 11.02 25.98 9.65 13.58 1.38 24.02 7.09 15.16 15.35 5.51 1.38 3.94 8.86 13.15 17.13 10.71 8.66 8.27 3.74 1.10 1.38 M16 1120 6.6QHPE4 20.87 15.75 29.53 23.898 9.21 12.60 29.49 11.02 15.35 1.57 27.36 7.87 18.19 16.46 6.30 1.57 4.41 10.43 14.72 19.88 10.71 9.65 9.33 4.13 1.38 1.57 M16 1700 12QHPF4 24.02 18.11 33.66 27.402 10.43 14.17 33.54 12.40 17.72 1.77 31.30 8.66 19.69 19.49 7.28 1.77 5.12 12.01 16.97 21.26 11.34 10.83 10.75 4.53 1.38 1.77 M20 2430 17QHPG4 29.92 21.65 37.99 31.496 11.93 15.75 38.70 13.78 20.28 1.97 36.14 9.45 22.24 22.24 8.86 1.97 6.30 14.76 20.59 25.00 12.01 12.40 12.32 5.12 1.65 2.36 M20 3420 28QHPH4 29.92 21.65 42.80 34.331 11.93 17.72 41.54 15.75 23.11 1.97 38.98 11.42 27.05 22.24 8.86 1.97 6.30 14.76 20.59 26.97 12.01 12.60 12.32 5.12 1.65 2.36 M20 4960 30


Umax

DD -k6

DN max LD

LV min XD YD ZD CB DT JT

QHPD4 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 1.4961 - 3.23 - 0.39 1.61 M12 15.630 5.98 9.92QHPE4 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 1.4961 - 3.23 - 0.39 1.61 M12 18.071 6.89 11.97QHPF4 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 1.6535 4.72 3.23 0.35 0.47 1.77 M16 20.669 7.40 13.11QHPG4 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 1.8898 6.10 3.23 0.39 0.55 2.03 M16 23.740 8.43 14.21QHPH4 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 1.8898 6.10 3.23 0.39 0.55 2.03 M16 26.575 8.43 14.21

Hollow

Backstop Shafts (2)

C7

ansen


QGear unit

HHorizontal L.S.S.

PParallel shafts

J TSize


Four stages4


(2) Fixation point forthe torque arm of siz-es J-K-L-M Fixation point for thetorque arm of sizesN-P-Q-R-S-T: Refer tous

(3)Shaft tolerances :as per ISO 286-2





X

Y

D

Z

CD

FT FU

CK

DDFS

6xTS

LD

JDGS

GS

JDT

L

DCC

JT

K

LS

LZ

JZ

6xT DQ

G

G GR

GR

U

DN

LV

H TR

BR

B

HD

(2)

A

RME

RM

C

F FP

RM

CVCU

(1)

FRFP(2)



Type A B BR C CD CK CU CV E F FP FR FS FT FU G GR GS H HD J JD JZ K RM T TR TSWeight

lbOil

US gal

QHPJ4 35.83 25.20 19.69 61.61 37.087 13.66 19.29 45.08 14.37 23.35 3.74 30.79 11.54 27.95 23.62 10.63 7.87 7.48 17.72 24.45 28.94 14.17 14.57 14.33 7.48 1.65 2.36 M24 5950 45QHPK4 35.83 25.20 19.69 66.65 40.157 13.66 21.26 48.15 16.34 23.35 3.74 35.83 13.50 32.99 23.62 10.63 7.87 7.48 17.72 24.45 31.50 14.17 14.76 14.53 7.48 1.65 2.36 M24 6830 46QHPL4 44.49 30.31 22.83 72.44 43.701 15.59 22.64 52.76 16.93 26.50 4.53 36.89 13.78 33.86 27.17 12.99 9.25 8.86 22.05 29.80 33.86 16.34 17.32 17.91 9.06 1.89 2.76 M24 9480 85QHPM4 44.49 30.31 22.83 79.25 47.559 15.59 25.59 56.61 19.88 26.50 4.53 43.70 16.73 40.67 27.17 12.99 9.25 8.86 22.05 29.80 36.22 16.34 17.32 17.91 9.06 1.89 2.76 M24 11240 95QHPN4 55.51 33.46 26.77 83.74 51.299 17.95 25.59 61.34 19.29 31.10 5.12 42.40 15.55 42.13 27.95 14.37 11.02 9.74 27.56 36.46 37.80 18.70 19.09 19.29 10.24 2.20 2.76 M30 16100 145QHPP4 55.51 33.46 26.77 88.70 53.898 17.95 27.95 63.94 21.65 31.10 5.12 47.36 17.91 47.09 27.95 14.37 11.02 9.74 27.56 36.46 40.16 18.70 19.09 20.08 10.24 2.20 2.76 M30 17640 156QHPQ4 55.51 33.46 26.77 97.01 58.661 17.95 31.50 68.70 25.20 31.10 5.12 55.67 21.46 55.39 27.95 14.37 11.02 9.74 27.56 36.46 41.73 18.70 19.09 20.08 10.24 2.20 2.76 M30 20500 166QHPR4 61.02 38.98 31.89 99.41 61.142 20.79 30.31 72.44 23.23 36.61 5.91 50.98 19.29 51.97 32.28 16.73 13.19 12.40 30.31 40.63 45.67 22.24 21.85 22.24 11.81 2.60 3.15 M30 25350 218QHPS4 61.02 38.98 31.89 105.16 64.134 20.79 33.07 75.43 25.98 36.61 5.91 56.73 22.05 57.72 32.28 16.73 13.19 12.40 30.31 40.63 48.43 22.24 21.85 23.03 11.81 2.60 3.15 M30 28000 235QHPT4 61.02 38.98 31.89 109.29 67.087 20.79 34.25 78.39 27.17 36.61 5.91 60.87 23.23 61.85 32.28 16.73 13.19 12.40 30.31 40.63 48.43 22.24 21.85 23.03 11.81 2.60 3.15 M30 30640 251

Type Solid HollowD -m6 L X Y Z ZZ DQ LS LZ

Umax

DD -m6

DNmax LD

LV min XD YD ZD CC DT JT

QHPJ4 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 2.2835 6.89 4.13 0.47 0.63 2.44 M20 37.087 7.40 15.35QHPK4 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 2.2835 6.89 4.13 0.47 0.63 2.44 M20 40.157 7.40 15.35QHPL4 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 2.5591 - 4.13 - 0.71 2.72 M20 43.701 8.43 17.09QHPM4 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 2.5591 - 4.13 - 0.71 2.72 M20 47.559 8.43 17.09QHPN4 11.8110 18.50 2.76 12.36 3xM24 5.512 12.992 1.97 46.10 26.57 2.9528 - 4.13 - 0.79 3.13 M20 51.299 9.65 19.29QHPP4 12.5984 20.08 2.76 13.15 3xM24 5.512 13.780 1.97 46.89 28.15 2.9528 - 4.13 - 0.79 3.13 M20 53.898 9.65 19.29QHPQ4 13.3858 21.65 3.15 13.98 3xM24 9.843 14.567 1.97 47.20 30.12 2.9528 - 4.13 - 0.79 3.13 M20 58.661 9.65 19.29QHPR4 14.1732 23.62 3.15 14.76 3xM24 9.843 15.748 1.97 53.46 32.68 3.3465 - 5.12 - 0.87 3.54 M20 61.142 10.24 24.02QHPS4 14.9606 25.59 3.15 15.55 3xM24 9.843 16.535 1.97 53.54 34.65 3.3465 - 5.12 - 0.87 3.54 M20 64.134 10.24 24.02QHPT4 15.7480 25.59 3.54 16.42 3xM24 9.843 17.323 1.97 54.53 37.01 3.3465 - 5.12 - 0.87 3.54 M20 67.087 10.24 24.02

Shafts (3) Backstop

Z X

Y

DZZ

ansen

ZD DIN 332

"D"DD

YD

XD

C8

Type Solid HollowD -m6 L X Y Z DQ LS LZ

Umax DB LB XB YB ZB DF

DNmax LN LP

LRmin HF CA DT JT

QHRA2 3.1496 6.69 0.87 3.35 M20 3.386 1.18 15.67 7.87 1.3780 k6 5.91 0.39 1.50 M12 10.24 5.71 4.92 1.38 0.79 12.80 5.827 5.20 9.17QHRB2 3.5433 6.69 0.98 3.74 M24 4.016 1.18 17.09 9.06 1.7717 k6 7.09 0.55 1.91 M16 12.60 6.30 6.10 1.77 0.79 14.37 6.732 5.98 9.92QHRC2 4.1339 8.27 1.10 4.37 M24 4.528 1.18 18.66 9.84 1.9685 k6 7.09 0.55 2.11 M16 12.60 6.30 6.10 1.77 0.79 16.34 7.756 6.89 11.97QHRD2 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 2.3622 m6 8.27 0.71 2.52 M20 16.14 8.27 7.28 2.76 1.18 18.39 8.898 7.40 13.11QHRE2 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18 21.54 10.315 8.43 14.21QHRF2 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 2.9528 m6 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57 24.80 11.772 9.65 15.43QHRG2 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 3.9370 m6 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 30.71 13.425 10.24 19.49QHRH2 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 3.9370 m6 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 30.71 16.260 10.24 19.49

97QU-HR200004Z Ainch

QGear unit

HHorizontal L.S.S.

RRight-angle shafts

A HSize


Two stages2


Torque arm at sameside as supportingbearing

(2) No backstop pos-sible for sizes A to Gwith hollow lowspeed shaft andshrink disk. Use hol-low shaft with key-way. - special execu-tion.

(3)Shaft tolerances :as per ISO 286-2




1 = standard shaft extension2 = additional shaft extensionT = backstop

X

Y

D

Z

CA

FU

DT

FT

FS6xTS

GS

GS

K

J

L

D

JT

JK

M

LS

LZ

JZ

DQ

U

IB

LN

LP

DNDF

LR

CU

A

RM

EFP F

C

RM

FP

IB

LB

HFDB

(1)

H TR

GP G G

4xT

GP(1)

B

Type A B C CU E F FP FS FT FU G GP GS H IB J JK JZ K M RM T TR TSWeight

lbOil

US gal

QHRA2 12.20 9.61 18.90 8.66 7.68 9.25 0.98 5.12 8.66 8.66 3.94 0.87 2.66 6.10 26.30 13.07 - 6.38 5.98 - 2.76 0.75 0.91 M12 440 2.11QHRB2 13.78 10.87 20.87 9.06 7.87 10.63 1.18 5.51 10.04 10.04 4.33 1.10 3.15 6.89 30.16 13.70 - 7.01 6.69 - 3.15 0.94 1.06 M14 620 2.64QHRC2 15.75 12.20 23.03 9.65 8.27 12.01 1.38 5.91 10.91 11.42 4.72 1.38 3.35 7.87 31.97 15.94 - 7.68 7.36 - 3.74 1.10 1.26 M16 740 3.69QHRD2 17.72 13.78 25.98 11.02 9.65 13.58 1.38 7.09 13.39 12.72 5.51 1.38 3.94 8.86 36.06 17.13 9.06 8.66 8.27 6.54 3.74 1.10 1.38 M16 1100 5QHRE2 20.87 15.75 29.53 12.60 11.02 15.35 1.57 7.87 16.34 13.78 6.30 1.57 4.41 10.43 39.84 19.88 - 9.65 9.33 - 4.13 1.38 1.57 M16 1700 8.4QHRF2 24.02 18.11 33.66 14.17 12.40 17.72 1.77 8.66 18.50 15.35 7.28 1.77 5.12 12.01 44.06 21.26 - 10.83 10.75 - 4.53 1.38 1.77 M20 2430 14QHRG2 29.92 21.65 37.99 15.75 13.78 20.28 1.97 9.45 19.17 19.17 8.86 1.97 6.30 14.76 48.86 25.00 12.99 12.40 12.32 8.90 5.12 1.65 2.36 M20 3420 25QHRH2 29.92 21.65 42.80 17.72 15.75 23.11 1.97 11.42 24.02 19.17 8.86 1.97 6.30 14.76 51.69 26.97 12.99 12.60 12.32 11.73 5.12 1.65 2.36 M20 4850 26

FanShafts (3) Backstop(2)

CL

T

CR

T

CT

T

1 2


C9

ansen

ZB DIN 332

"D"DB

YB

XB

CL

T

CR

T

CT

T

1 2


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

J MSize


Two stages2

(1) 4 x jacking screwFixation point for thetorque arm: refer tous







X

Y

D

Z

viewed from

GS

GS

K

J

L

M

DT

FT FU

FS6xTS

JT

CA

JK

D

LS

LZ

JZ

DQ

U

IB

LN

LP

DNDF

LR

RM RM

FP E F

C

(1)

A

CU IB

DBHF

LB

FP

H TR

4xT

GP G G GP

B

Z X

Y

DZZ

Type A B C CU E F FP FS FT FU G GP GS H IB J JK JZ K M RM T TR TSWeight

lbOil

US gal

QHRJ2 35.83 25.20 46.26 19.29 14.37 24.41 3.74 11.54 22.83 21.65 10.63 1.97 7.48 17.72 56.77 28.94 15.08 14.57 14.33 10.43 7.48 1.65 2.36 M24 6170 40QHRK2 35.83 25.20 51.30 21.26 16.34 27.48 3.74 13.50 27.87 21.65 10.63 1.97 7.48 17.72 59.84 31.50 15.08 14.76 14.53 13.50 7.48 1.65 2.36 M24 7280 44QHRL2 44.49 30.31 55.51 22.64 16.93 29.53 4.53 13.78 27.56 25.20 12.99 2.17 8.86 22.05 68.58 33.86 18.54 17.32 17.91 12.99 9.06 1.89 2.76 M24 9040 75QHRM2 44.49 30.31 62.32 25.59 19.88 33.39 4.53 16.73 34.37 25.20 12.99 2.17 8.86 22.05 72.44 36.22 18.54 17.32 17.91 16.85 9.06 1.89 2.76 M24 10800 87


Umax

DB -m6 LB XB YB ZB DF

DNmax LN LP

LRmin HF CA DT JT

QHRJ2 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 36.69 16.417 11.61 21.57QHRK2 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 36.69 19.488 11.61 21.57QHRL2 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 45.51 19.961 13.07 25.28QHRM2 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 45.51 23.819 13.07 25.28

Fan

Hollow

Shafts (2) Backstop

ansen

ZB DIN 332

"D"DB

YB

XB

C10

CL

T

CR

T

CT

T

1 2


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

C HSize


Three stages3


2) Shaft tolerances :as per ISO 286-2






X

Y

D

Z

viewed from

K

J

GS

GS

L

D

6xTS FS

FT

CB

FU

DT

JT

LS

LZ

JZ

DQ

U

IC

LN

LP

DN

LR

DF

CU IC

A

FP

RM

E F

FR

FP

RM

HF

LC

C

DC

(1)

TR

4xT

B

GPGGGP

H

(1)

Type Solid D -m6 L X Y Z DQ LS LZ

Umax DC LC XC YC ZC DF

DNmax LN LP

LRmin HF CB DT JT

QHRC3 4.1339 8.27 1.10 4.37 M24 4.528 1.18 18.66 9.84 1.3780 k6 5.91 0.39 1.50 M12 12.60 6.30 4.92 1.77 0.79 16.34 13.583 5.20 9.17QHRD3 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 1.7717 k6 7.09 0.55 1.91 M16 12.60 6.30 6.10 1.77 0.79 18.39 15.630 5.98 9.92QHRE3 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 1.9685 k6 7.09 0.55 2.11 M16 12.60 6.30 6.10 1.77 0.79 21.54 18.071 6.89 11.97QHRF3 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 2.3622 m6 8.27 0.71 2.52 M20 16.14 8.27 7.28 2.76 1.18 24.80 20.669 7.40 13.11QHRG3 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18 30.71 23.740 8.43 14.21QHRH3 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18 30.71 26.575 8.43 14.21

Hollow


Type A B C CU E F FP FR FS FT FU G GP GS H IC J JZ K RM T TR TSWeight

lbOil

US gal

QHRC3 15.75 12.20 23.03 9.65 8.27 12.01 1.38 20.47 5.91 12.80 12.80 4.72 1.38 3.35 7.87 34.06 15.94 7.68 7.36 3.74 1.10 1.26 M16 800 4.22QHRD3 17.72 13.78 25.98 11.02 9.65 13.58 1.38 24.02 7.09 15.16 15.35 5.51 1.38 3.94 8.86 39.06 17.13 8.66 8.27 3.74 1.10 1.38 M16 1160 6.6QHRE3 20.87 15.75 29.53 12.60 11.02 15.35 1.57 27.36 7.87 18.19 16.46 6.30 1.57 4.41 10.43 42.28 19.88 9.65 9.33 4.13 1.38 1.57 M16 1730 10QHRF3 24.02 18.11 33.66 14.17 12.40 17.72 1.77 31.30 8.66 19.69 19.49 7.28 1.77 5.12 12.01 47.83 21.26 10.83 10.75 4.53 1.38 1.77 M20 2480 16QHRG3 29.92 21.65 37.99 15.75 13.78 20.28 1.97 36.14 9.45 22.24 22.24 8.86 1.97 6.30 14.76 53.27 25.00 12.40 12.32 5.12 1.65 2.36 M20 3530 27QHRH3 29.92 21.65 42.80 17.72 15.75 23.11 1.97 38.98 11.42 27.05 22.24 8.86 1.97 6.30 14.76 56.10 26.97 12.60 12.32 5.12 1.65 2.36 M20 4960 29

C11

ansen

ZCDIN332"D"

DC

YC

XC

CL

T

CR

T

CT

T

1 2


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

J TSize


Three stages3


(2) Fixation point forthe torque arm of siz-es J-K-L-M Fixation point for thetorque arm of sizesN-P-Q-R-S-T: Refer tous







X

Y

D

Z

viewed from

6xTS FS

FT

CB

FU

DT

JT

D

K

GS

GS

J

L

LS

LZ

U

JZ

6xT DQ

G

G

GR

GR

IC

LN

DNDF

LR

LP

H TR

BR

B

(2)

CU IC

LC

HF

DC

FP

RM

F

RMRME

FRC

FP

A

(1)

(2)

Z X

Y

DZZ

Type A B BR C CU E F FP FR FS FT FU G GR GS H IC J JZ K RM T TR TSWeight

lbOil

US gal

QHRJ3 35.83 25.20 19.69 61.61 19.29 14.37 23.35 3.74 30.79 11.54 27.95 23.62 10.63 7.87 7.48 17.72 60.47 28.94 14.57 14.33 7.48 1.65 2.36 M24 5950 44QHRK3 35.83 25.20 19.69 66.65 21.26 16.34 23.35 3.74 35.83 13.50 32.99 23.62 10.63 7.87 7.48 17.72 63.54 31.50 14.76 14.53 7.48 1.65 2.36 M24 7050 48QHRL3 44.49 30.31 22.83 72.44 22.64 16.93 26.50 4.53 36.89 13.78 33.86 27.17 12.99 9.25 8.86 22.05 68.82 33.86 17.32 17.91 9.06 1.89 2.76 M24 9480 78QHRM3 44.49 30.31 22.83 79.25 25.59 19.88 26.50 4.53 43.70 16.73 40.67 27.17 12.99 9.25 8.86 22.05 72.68 36.22 17.32 17.91 9.06 1.89 2.76 M24 11240 87QHRN3 55.51 33.46 26.77 83.74 25.59 19.29 31.10 5.12 42.40 15.55 42.13 27.95 14.37 11.02 9.74 27.56 79.88 37.80 19.09 19.29 10.24 2.20 2.76 M30 16310 140QHRP3 55.51 33.46 26.77 88.70 27.95 21.65 31.10 5.12 47.36 17.91 47.09 27.95 14.37 11.02 9.74 27.56 82.48 40.16 19.09 20.08 10.24 2.20 2.76 M30 17860 149QHRQ3 55.51 33.46 26.77 97.01 31.50 25.20 31.10 5.12 55.67 21.46 55.39 27.95 14.37 11.02 9.74 27.56 87.24 41.73 19.09 20.08 10.24 2.20 2.76 M30 20720 159QHRR3 61.02 38.98 31.89 99.41 30.31 23.23 36.61 5.91 50.98 19.29 51.97 32.28 16.73 13.19 12.40 30.31 96.34 45.67 21.85 22.24 11.81 2.60 3.15 M30 25580 211QHRS3 61.02 38.98 31.89 105.16 33.07 25.98 36.61 5.91 56.73 22.05 57.72 32.28 16.73 13.19 12.40 30.31 99.33 48.43 21.85 23.03 11.81 2.60 3.15 M30 28220 227QHRT3 61.02 38.98 31.89 109.29 34.25 27.17 36.61 5.91 60.87 23.23 61.85 32.28 16.73 13.19 12.40 30.31 102.28 48.43 21.85 23.03 11.81 2.60 3.15 M30 30860 243


Umax

DC -m6 LC XC YC ZC DF

DNmax LN LP

LRmin HF CB DT JT

QHRJ3 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 2.9528 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57 36.69 28.189 9.65 15.43QHRK3 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 2.9528 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57 36.69 31.260 9.65 15.43QHRL3 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 45.51 33.386 10.24 19.49QHRM3 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 45.51 37.244 10.24 19.49QHRN3 11.8110 18.50 2.76 12.36 3xM24 5.512 12.992 1.97 46.10 26.57 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 56.69 39.528 11.61 21.57QHRP3 12.5984 20.08 2.76 13.15 3xM24 5.512 13.780 1.97 46.89 28.15 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 56.69 42.126 11.61 21.57QHRQ3 13.3858 21.65 3.15 13.98 3xM24 9.843 14.567 1.97 47.20 30.12 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 56.69 46.890 11.61 21.57QHRR3 14.1732 23.62 3.15 14.76 3xM24 9.843 15.748 1.97 53.46 32.68 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 62.20 47.717 13.07 25.28QHRS3 14.9606 25.59 3.15 15.55 3xM24 9.843 16.535 1.97 53.54 34.65 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 62.20 50.709 13.07 25.28QHRT3 15.7480 25.59 3.54 16.42 3xM24 9.843 17.323 1.97 54.53 37.01 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 62.20 53.661 13.07 25.28

Shafts (3) Fan Backstop

ansen

ZCDIN332"D"

DC

YC

XC

C12

CL

T

CR

T

CT

T

1 2

Type A B C CU E F FP FR FS FT FU G GP GS H ID J K JZ RM T TR TSWeight

lbOil

US gal

QHRD4 17.72 13.78 25.98 11.02 9.65 13.58 1.38 24.02 7.09 15.16 15.35 5.51 1.38 3.94 8.86 41.06 17.13 8.27 8.66 3.74 1.10 1.38 M16 1170 6.6QHRE4 20.87 15.75 29.53 12.60 11.02 15.35 1.57 27.36 7.87 18.19 16.46 6.30 1.57 4.41 10.43 44.37 19.88 9.33 9.65 4.13 1.38 1.57 M16 1790 11QHRF4 24.02 18.11 33.66 14.17 12.40 17.72 1.77 31.30 8.66 19.69 19.49 7.28 1.77 5.12 12.01 50.83 21.26 10.75 10.83 4.53 1.38 1.77 M20 2650 18QHRG4 29.92 21.65 37.99 15.75 13.78 20.28 1.97 36.14 9.45 22.24 22.24 8.86 1.97 6.30 14.76 55.71 25.00 12.32 12.40 5.12 1.65 2.36 M20 3530 29QHRH4 29.92 21.65 42.80 17.72 15.75 23.11 1.97 38.98 11.42 27.05 22.24 8.86 1.97 6.30 14.76 58.54 26.97 12.32 12.60 5.12 1.65 2.36 M20 5070 32


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

D HSize


Four stages4






Type SolidD -M6 L X Y Z DQ LS LZ

Umax

DD -K6 LD XD YD ZD CB DT JT

QHRD4 4.5276 8.27 1.26 4.80 M24 5.118 1.18 20.91 12.20 1.3780 5.91 0.39 1.50 M12 15.630 5.98 9.92QHRE4 5.3150 9.84 1.42 5.63 M30 5.906 1.18 23.74 13.39 1.3780 5.91 0.39 1.50 M12 18.071 6.89 11.97QHRF4 6.1024 9.84 1.57 6.46 M30 6.693 1.18 27.09 15.35 1.7717 7.09 0.55 1.91 M16 20.669 7.40 13.11QHRG4 7.0866 11.81 1.77 7.48 M30 7.480 1.18 30.39 16.73 1.9685 7.09 0.55 2.11 M16 23.740 8.43 14.21QHRH4 7.4803 13.78 1.77 7.87 M30 8.268 1.57 31.26 17.72 1.9685 7.09 0.55 2.11 M16 26.575 8.43 14.21



Backstop

Hollow

Shafts (2)

X

Y

D

Z

viewed from

6xTS FS

FT

CB

FU

GS

GS

K

J

LDT

D

JT

ULS

LZ

JZ

DQ

CU ID

A

FP

RM

E F FP

RM

LD

DD

FR

C

(1)

H TR

B

GP G G GP

4xT

(1)

C13

ansen

ZD DIN 332

"D"DD

YD

XD

Type A B BR C CU E F FP FR FS FT FU G GR GS H ID J K JZ RM T TR TSWeight

lbOil

US gal

QHRJ4 35.83 25.20 19.69 61.61 19.29 14.37 23.35 3.74 30.79 11.54 27.95 23.62 10.63 7.87 7.48 17.72 64.25 28.94 14.33 14.57 7.48 1.65 2.36 M24 6170 46QHRK4 35.83 25.20 19.69 66.65 21.26 16.34 23.35 3.74 35.83 13.50 32.99 23.62 10.63 7.87 7.48 17.72 67.32 31.50 14.53 14.76 7.48 1.65 2.36 M24 7050 50QHRL4 44.49 30.31 22.83 72.44 22.64 16.93 26.50 4.53 36.89 13.78 33.86 27.17 12.99 9.25 8.86 22.05 73.23 33.86 17.91 17.32 9.06 1.89 2.76 M24 9700 79QHRM4 44.49 30.31 22.83 79.25 25.59 19.88 26.50 4.53 43.70 16.73 40.67 27.17 12.99 9.25 8.86 22.05 77.09 36.22 17.91 17.32 9.06 1.89 2.76 M24 11460 89QHRN4 55.51 33.46 26.77 83.74 25.59 19.29 31.10 5.12 42.40 15.55 42.13 27.95 14.37 11.02 9.74 27.56 83.58 37.80 19.29 19.09 10.24 2.20 2.76 M30 16310 145QHRP4 55.51 33.46 26.77 88.70 27.95 21.65 31.10 5.12 47.36 17.91 47.09 27.95 14.37 11.02 9.74 27.56 86.18 40.16 20.08 19.09 10.24 2.20 2.76 M30 17860 156QHRQ4 55.51 33.46 26.77 97.01 31.50 25.20 31.10 5.12 55.67 21.46 55.39 27.95 14.37 11.02 9.74 27.56 90.94 41.73 20.08 19.09 10.24 2.20 2.76 M30 20720 166QHRR4 61.02 38.98 31.89 99.41 30.31 23.23 36.61 5.91 50.98 19.29 51.79 32.28 16.73 13.19 12.40 30.31 96.57 45.67 22.24 21.85 11.81 2.60 3.15 M30 25570 218QHRS4 61.02 38.98 31.89 105.16 33.07 25.98 36.61 5.91 56.73 22.05 57.72 32.28 16.73 13.19 12.40 30.31 99.57 48.43 23.03 21.85 11.81 2.60 3.15 M30 28220 235QHRT4 61.02 38.98 31.89 109.29 34.25 27.17 36.61 5.91 60.87 23.23 61.85 32.28 16.73 13.19 12.40 30.31 102.52 48.43 23.03 21.85 11.81 2.60 3.15 M30 30860 251


QGear unit

HHorizontal L.S.S.

RRight-angle shafts

J TSize


Four stages4


(2) Fixation point forthe torque arm of siz-es J-K-L-M

Fixation point for thetorque arm of sizesN-P-Q-R-S-T: Refer tous





CL

T

CR

T

CT

T

1 2

CL

T

CR

T

CT

T

1 2

Type QHRJ4 QHRM4 Type QHRN4 QHRT4


1= standard shaft extension2 = additional shaft extensionT = backstop

X

Y

D

Z

Z X

Y

DZZ

6xTS FS

FT

CC

FU

DT

D

L

GS

GS

J

K

JT

LZ

LS U

JZ

6xT DQ

G

G

GR

GR

CU ID

LD

DD

RMRM

FPF

C

FR

RME

A

(1)

FP(2)

H TR

BR

B

(2)

viewed from


Umax

DD - m6 LD XD YD ZD CC DT JT

QHRJ4 8.2677 13.78 1.97 8.70 M30 - 9.055 1.57 35.71 18.90 2.3622 8.27 0.71 2.52 M20 37.087 7.40 15.35QHRK4 9.0551 16.14 1.97 9.49 M30 - 10.236 1.57 36.50 21.26 2.3622 8.27 0.71 2.52 M20 40.157 7.40 15.35QHRL4 9.8425 16.14 2.20 10.31 M30 - 11.024 1.57 42.20 23.43 2.5591 8.27 0.71 2.72 M20 43.701 8.43 17.09QHRM4 10.6299 18.50 2.48 11.10 3xM24 5.512 11.811 1.57 42.48 24.21 2.5591 8.27 0.71 2.72 M20 47.559 8.43 17.09QHRN4 11.8110 18.50 2.76 12.36 3xM24 5.512 12.992 1.97 46.10 26.57 2.9528 8.27 0.79 3.13 M20 51.299 9.65 19.29QHRP4 12.5984 20.08 2.76 13.15 3xM24 5.512 13.780 1.97 46.89 28.15 2.9528 8.27 0.79 3.13 M20 53.898 9.65 19.29QHRQ4 13.3858 21.65 3.15 13.98 3xM24 9.843 14.567 1.97 47.20 30.12 2.9528 8.27 0.79 3.13 M20 58.661 9.65 19.29QHRR4 14.1732 23.62 3.15 14.76 3xM24 9.843 15.748 1.97 53.46 32.68 3.9370 8.27 1.10 4.17 M24 61.142 10.24 24.02QHRS4 14.9606 25.59 3.15 15.55 3xM24 9.843 16.535 1.97 53.54 34.65 3.9370 8.27 1.10 4.17 M24 64.134 10.24 24.02QHRT4 15.7480 25.59 3.54 16.42 3xM24 9.843 17.323 1.97 54.53 37.01 3.9370 8.27 1.10 4.17 M24 67.087 10.24 24.02

BackstopShafts (3)

ansen

C14

ZD DIN 332

"D"DD

YD

XD

Cooling coil

QGear unit

HHorizontal L.S.S.

P/R A TSize Stages

2 4

Type QH..2 / QH..3 / QH..4 SizePosition A B C D E F G H J K L M N P Q R S T

Oil sight glass OA 9.84 10.24 10.83 12.20 13.78 15.35 16.93 18.90 20.47 22.44 23.82 26.77 26.77 29.13 32.68 31.50 34.25 35.43

Drain cock OB 11.81 12.20 12.80 14.57 16.14 18.50 20.08 22.05 24.41 26.38 27.76 30.71 31.69 34.06 37.60 36.42 39.17 40.35

Oil level switch OC 13.39 13.78 14.37 15.75 17.32 18.90 20.47 22.44 24.02 25.98 27.36 30.31 30.31 32.68 36.22 35.04 37.80 38.98

Dust-proof breather plug OD 15.94 17.52 19.49 21.46 24.61 27.76 33.27 33.27 39.17 39.17 47.83 47.83 59.84 59.84 59.84 65.35 65.35 65.35

Options


97QU-H000C003Z Ainch

The above mounting positions and dimensions are standard for gear units equipped with one single accessory. They may vary for units equipped with several accessories.

Parallel/right-angle shafts

�

�

�

�

C1

0.500-NPT

C2

C3

4

3 2 1

OA

OC

OB

OD

Type Size QH..2 A B C D E F G H J K L M N P Q

C1 17.32 20.08 22.05 24.61 27.95 31.10 35.24 37.99 40.55 43.70 49.02 52.95 55.12 57.68 62.40

C2 1.18 1.38 1.85 2.05 2.20 2.32 2.60 2.60 3.15 3.15 3.74 3.74 3.54 3.54 3.54

C3 2.76 2.76 3.15 3.15 3.15 3.94 5.12 5.12 5.12 5.12 5.12 5.12 5.12 5.12 5.12

Type Size QH..3 C D E F G H J K L M N P Q R S T

C1 25.20 28.94 32.28 36.42 41.34 44.09 47.64 50.59 57.09 60.43 65.55 68.31 73.03 74.80 77.76 80.71

C2 1.85 2.09 2.20 2.32 2.60 2.60 2.76 2.76 3.35 3.35 3.90 3.90 3.90 3.94 3.94 3.94

C3 1.65 1.97 2.76 3.15 3.15 3.15 5.12 5.12 5.12 5.12 5.12 5.12 5.12 5.12 5.12 5.12

C15

ansen

A

QH..2 QH..3 QH..4

A 17.13

B 19.09

C 20.87 20.87

D 24.61 24.21 23.43

E 29.72 29.72 28.54

F 34.06 33.46 32.48 6.50

G 40.35 40.35 38.78 4.13

H 41.14 41.14 38.78 4.13

J 47.24 47.05 45.28 4.53

K 47.83 47.05 45.28 4.53

L 57.68 56.69 55.31 9.25

M 58.07 56.69 55.31 9.25

N 70.87 70.47 68.31 9.65

P 71.46 70.47 68.31 9.65

Q 71.85 70.47 68.31 9.65

R 78.15 74.80 9.65

S 78.15 74.80 9.65

T 78.15 74.80 9.65

Size B

Available space for removal of dipstick and magnetic plug

QGear unit

HHorizontal L.S.S.

P/R A TSize Stages

2 4


97QU-HX000013Z Ainch


A

B

ansen

C16

Machine shaft (5)

HSD d Ds HZS

TAlbf.in

JZ LZ LR ZY DZ dw** d1DQ**h7

D1min

L1 L2 L3 L4 R Z (4)

Q..A. HSD110-81x110 4.331 7.28 1.93 M12 1070 6.38 15.67 0.24 4x M6 3.858 3.307h6 3.346 3.386 3.976 15.55 13.11 2.24 0.12 0.20 M20

Q..B. HSD125-81x125 4.921 8.46 2.09 M12 1070 7.01 17.09 0.24 4x M6 4.449 3.937h6 3.976 4.016 4.606 16.97 14.41 2.36 0.12 0.20 M24

Q..C. HSD140-81x140 5.512 9.06 2.28 M14 1700 7.68 18.66 0.24 6x M6 5.000 4.449h6 4.488 4.528 5.118 18.54 15.79 2.56 0.12 0.20 M24

Q..D. HSD165-81x165 6.496 11.42 2.68 M16 2600 8.66 20.91 0.24 4x M8 5.709 5.039h6 5.079 5.118 5.709 20.79 17.64 2.95 0.12 0.20 M24

Q..E. HSD185-81x185 7.283 12.60 3.35 M16 2600 9.65 23.74 0.24 4x M10 6.535 5.827h6 5.866 5.906 6.496 23.58 19.84 3.54 0.16 0.20 M30

Q..F. HSD220-81x220 8.661 14.57 4.06 M20 5000 10.83 27.09 0.24 4x M12 7.677 6.614g6 6.654 6.693 7.283 26.93 22.28 4.45 0.16 0.20 M30

Q..G. HSD240-81x240 9.449 15.94 4.21 M20 5000 12.40 30.39 0.24 6x M12 8.268 7.283g6 7.402 7.480 8.071 30.24 25.59 4.45 0.16 0.20 M30

Q..H. HSD260-81x260 10.236 16.93 4.69 M20 5000 12.60 31.26 0.28 6x M12 9.055 8.071g6 8.189 8.268 9.055 31.06 26.06 4.80 0.20 0.24 M36

Q..J. HSD280-81x280 11.024 18.11 5.20 M20 5000 14.57 35.71 0.28 6x M12 9.843 8.858g6 8.976 9.055 9.843 35.51 29.92 5.39 0.20 0.24 M36

Q..K. HSD320-81x320 12.598 20.47 5.51 M24 8600 14.76 36.50 0.28 6x M16 11.220 10.039g6 10.157 10.236 11.024 36.30 30.31 5.79 0.20 0.24 M36

Q..L. HSD340-81x340 13.386 22.44 6.10 M24 8600 17.32 42.20 0.28 6x M16 12.008 10.827g6 10.945 11.024 11.811 42.01 35.63 6.18 0.20 0.24 M36

Q..M. HSD360-81x360 14.173 23.23 6.38 M24 8600 17.32 42.48 0.28 6x M16 12.795 11.614g6 11.732 11.811 12.598 42.28 35.71 6.38 0.20 0.24 M36

Q..N. HSD390-81x390 15.354 25.59 6.54 M27 12800 19.09 46.10 0.35 6x M16 13.976 12.795g6 12.913 12.992 13.976 45.91 38.86 6.85 0.20 0.31 M42

Q..P. HSD420-81x420 16.535 27.17 7.32 M27 12800 19.09 46.89 0.35 6x M20 14.961 13.583g6 13.701 13.780 14.764 46.69 38.86 7.64 0.20 0.31 M42

Q..Q. HSD440-81x440 17.323 29.13 7.64 M27 12800 19.09 47.20 0.35 6x M20 15.748 14.370g6 14.488 14.567 15.551 47.01 38.78 8.03 0.20 0.31 M42

Q..R. HSD480-81x480 18.898 31.50 8.39 M27 12800 21.85 53.46 0.35 6x M20 17.126 15.551g6 15.669 15.748 16.732 53.27 44.25 8.82 0.20 0.31 M42

Q..S. HSD500-81x500 19.685 33.46 8.39 M30 17400 21.85 53.54 0.35 6x M20 17.913 16.339g6 16.457 16.535 17.520 53.35 44.33 8.82 0.20 0.31 M42

Q..T. HSD530-81x530 20.866 35.83 9.37 M30 17400 21.85 54.53 0.35 6x M24 18.898 17.126g6 17.244 17.323 18.307 54.33 44.33 9.80 0.20 0.31 M42

0

Shrink disc (2)Type

Hollow shaft

QGear unit

HHorizontal L.S.S.

P/R A TSize Stages

2 4


97QU-000D0003Z Ainch


(1) If a thrust load oc-curs, which is not tak-en up by the shoulderon the machine shaft,a thrust washerwould need to beprovided.

(2) Coding and di-mensions of shrinkdisc type HSD of themake "Stüwe".Equivalent "Schaefer(TAS)" or "Ringfeder"shrink discs may alsobe used.

(3) SD upon requestHSD standard

(4) M20, M24 as perDIN 332- "Form D"

(5) Minimum yieldstrength of machineshaft: Re ≥ 47850 lb/in2

** Tolerances ofshaft diameters DQand dw: according toISO 286-2

DZ d Ds

ZY

ZS DIN 931

Z

dwd1DQD1

L3

L2

L1

LZH

L4 (45°)

•

(1)

.125

SD (3)

HSD

••

LR (45°)

R

• .125

JZ

ansen

C18

Hollow low speed shaft - Shrink disc connection

Machine shaft dimensions

D

Hollow low speed shaft - Keyed connection

QGear unit

HHorizontal L.S.S.

P/R A TSize Stages

2 4


97QU-H00K0001Z Ainch


K

(1) Safety guard asprotection againstpossible physical inju-ry and penetration ofdust and water

LSk

LZk

JZ

DQ

U

C19

ansen

DQ LSk LZk JZ U

QH.A. 3.39 1.38 12.76 6.38 4.92

QH.B. 4.02 1.57 14.02 7.01 5.91

QH.C. 4.53 1.57 15.35 7.68 6.30

QH.D. 5.12 1.57 17.32 8.66 7.48

QH.E. 5.91 1.57 19.29 9.65 8.07

QH.F. 6.69 1.57 21.65 10.83 9.45

QH.G. 7.48 1.97 24.80 12.40 10.63

QH.H. 8.27 2.17 25.20 12.60 11.81

QH.J. 9.06 2.17 29.13 14.57 13.11

QH.K. 10.24 2.17 29.53 14.76 14.76

QH.L. 11.02 2.56 34.65 17.32 15.16

QH.M. 11.81 2.56 36.81 17.32 15.94

QH.N. 12.99 2.56 39.17 19.09 17.52

QH.P. 13.78 2.56 40.94 19.09 18.31

QH.Q. 14.57 2.56 41.54 19.09 19.09

QH.R. 15.75 2.56 46.46 21.85 20.67

QH.S. 16.54 2.56 46.46 21.85 21.46

QH.T. 17.32 2.56 49.02 21.85 22.64

Type

(1)

Hollow shaft (1)

JZ LZk LR ZY DZ Z4

QH.A. 6.38 12.76 0.24 4xM8 3.66 M24QH.B. 7.01 14.02 0.24 4xM10 4.25 M30QH.C. 7.68 15.35 0.24 4xM10 4.72 M30QH.D. 8.66 17.32 0.24 4xM12 5.71 M30QH.E. 9.65 19.29 0.24 4xM12 6.50 M36QH.F. 10.83 21.65 0.24 6xM12 7.48 M36QH.G. 12.40 24.80 0.24 4xM16 8.27 M36QH.H. 12.60 25.20 0.28 4xM16 9.06 M42QH.J. 14.57 29.13 0.28 6xM16 9.84 M42QH.K. 14.76 29.53 0.28 6xM16 11.02 M42QH.L. 17.32 34.65 0.28 6xM20 11.81 M42QH.M. 17.32 36.81 0.28 6xM20 12.60 M42QH.N. 19.09 39.17 0.35 6xM20 13.78 M48QH.P. 19.09 40.94 0.35 6xM24 14.57 M48QH.Q. 19.09 41.54 0.35 6xM24 15.35 M48QH.R. 21.85 46.46 0.35 8xM24 16.73 M48QH.S. 21.85 46.46 0.35 8xM24 17.52 M48QH.T. 21.85 49.02 0.35 8xM24 18.50 M48

Type

Machine shaft

dkh6

d1 DQh7

D1min

L1 L2 L3 L4 Lk R Z Z1 Z2 Z3 DV X Y

QH.A. 2.9528 3.35 3.3858 3.98 12.64 8.07 3.66 0.12 3.94 0.20 M20 1.65 - - - 0.79 3.13QH.B. 3.3465 3.98 4.0157 4.61 13.90 8.46 4.21 0.12 4.53 0.20 M24 1.97 - - - 0.87 3.54QH.C. 3.9370 4.49 4.5276 5.12 15.24 8.66 5.28 0.12 5.71 0.20 M24 1.97 - - - 1.10 4.17QH.D. 4.5276 5.08 5.1181 5.71 17.20 9.65 6.18 0.12 6.69 0.20 M24 1.97 - - - 1.26 4.80QH.E. 5.3150 5.87 5.9055 6.50 19.13 10.63 7.01 0.16 7.68 0.20 M30 2.36 2xM12 0.98 3.74 1.42 5.63QH.F. 6.1024 6.65 6.6929 7.28 21.50 11.61 8.35 0.16 9.06 0.20 M30 2.36 2xM16 1.18 4.13 1.57 6.46QH.G. 6.8898 7.40 7.4803 8.07 24.65 13.78 9.25 0.16 10.04 0.20 M30 2.36 2xM16 1.18 4.92 1.77 7.28QH.H. 7.6772 8.19 8.2677 9.06 25.00 12.40 10.98 0.20 11.81 0.24 M36 2.95 3xM16 1.18 5.71 1.77 8.07QH.J. 8.4646 8.98 9.0551 9.84 28.94 15.55 11.65 0.20 12.60 0.24 M36 2.95 3xM16 1.18 6.50 1.97 8.90QH.K. 9.2520 10.16 10.2362 11.02 29.33 14.96 12.13 0.20 13.19 0.24 M36 2.95 3xM16 1.18 7.28 2.20 9.72QH.L. 10.0394 10.94 11.0236 11.81 34.45 17.52 14.72 0.20 15.75 0.24 M36 2.95 3xM24 1.38 7.09 2.20 10.51QH.M. 10.8268 - 11.8110 12.60 36.61 - 17.36 0.20 18.50 0.24 M36 2.95 3xM24 1.38 7.87 2.48 11.30QH.N. 11.8110 12.91 12.9921 13.98 38.98 19.09 17.28 0.20 18.50 0.31 M42 3.54 4xM24 1.38 8.86 2.76 12.36QH.P. 12.5984 - 13.7795 14.76 40.75 - 19.25 0.20 20.47 0.31 M42 3.54 4xM24 1.38 9.65 2.76 13.15QH.Q. 13.3858 - 14.5669 15.55 41.34 - 19.45 0.20 20.87 0.31 M42 3.54 4xM24 1.38 10.43 3.15 13.98QH.R. 14.5669 15.67 15.7480 16.73 46.26 22.09 21.42 0.20 22.83 0.31 M42 3.54 4xM24 1.38 11.61 3.15 15.16QH.S. 15.3543 16.46 16.5354 17.52 46.26 22.09 21.22 0.20 22.83 0.31 M42 3.54 4xM24 1.38 12.40 3.54 16.02QH.T. 16.1417 - 17.3228 18.31 48.82 - 22.99 0.20 24.61 0.31 M42 3.54 4xM24 1.38 13.19 3.54 16.81

Type

Hollow low speed shaft - Keyed connection - Machine shaft dimensions

QGear unit

HHorizontal L.S.S.

P/R A TSize Stages

2 4


97QU-H00K0011Z Ainch


(1) Keysway as perDIN 6885 T1.

Tolerances of shaftdiameters dk andDQ: according toISO 286-2

LR (45°)

R

• 3.245°

R

D1

L3

L2

L1

DQ d1

Lk

Z1

Z3ZY

DZZ4 dk

L4(45°)3.2

LZkX(JS9/h9)

Y

X(JS9/h9)

Y

DV

2xZ2

X(JS9/h9)

Y

DV

3xZ2

JZ

X(JS9/h9)

Y

DV

4xZ2

Z

Z

Z Z

ansen

C20

K

Type AB BC C CB CK CU CV E FP HL HS JS KT M RM T TRWeight

lbOil

US gal

QVPC2 10.04 11.02 18.50 13.583 9.17 10.24 19.17 7.87 1.38 27.91 20.47 8.03 19.33 6.50 3.74 1.10 1.50 790 8.2QVPD2 11.22 11.42 20.87 15.630 10.43 11.42 21.77 8.86 1.57 30.79 23.82 8.15 21.93 7.68 3.74 1.38 1.57 1150 9.8QVPE2 12.60 13.19 23.62 18.071 12.01 12.83 25.08 10.24 1.57 35.43 26.18 9.65 24.80 8.86 4.13 1.38 1.77 1740 15QVPF2 14.37 14.65 27.17 20.669 13.58 14.57 28.35 11.61 1.97 37.20 28.94 9.57 26.69 10.43 5.31 1.65 2.05 2450 22

97QU-VP2N0003Z Ainch

QGear unit

VVertical L.S.S.

PParallel shafts

C FSize


Two stages2

UD UU

TypeD -m6 L X Y Z DB LB XB YB ZB DP(1) JP PB(1) PC(1)

QVPC2 4.1339 8.27 1.10 4.37 M24 1.8898 k6 4.33 0.55 2.03 M16 4.33 1.14 2.95 4.33QVPD2 4.5276 8.27 1.26 4.80 M24 2.2835 m6 5.51 0.63 2.44 M20 4.33 0.75 2.56 4.33QVPE2 5.3150 9.84 1.42 5.63 M30 2.5591 m6 5.51 0.71 2.72 M20 5.71 -0.04 1.97 5.71QVPF2 6.1024 9.84 1.57 6.46 M30 2.9528 m6 5.51 0.79 3.13 M20 5.71 0.24 2.36 5.71

Pump

Shaft arrangements (front view)

(1) Additional spacefor pump removal tobe provided

(2) Grease lubrica-tion point only forshaft arrangementUD





Shafts (3)

X

Y

D

Z

HL

JSTR

L

D

DP

DB

CB

LB

HS

JP

CK

PB

(2)

FP

C

E

RM

E

RM

FPFP

RME

CE FP

CV4xT

M

RM

CU

AB AB

KT(2)

PC

BC

C21

ansen

ZB DIN 332

"D"DB

YB

XB

Type AB BC C CB CU CV E FP HS JS M RM T TRWeight

lbOil

US gal

QVPC2 10.04 11.02 18.50 13.583 10.24 19.17 7.87 1.38 20.47 8.03 6.50 3.74 1.10 1.50 900 8.2QVPD2 11.22 11.42 20.87 15.630 11.42 21.77 8.86 1.57 23.82 8.15 7.68 3.74 1.38 1.57 1300 9.8QVPE2 12.60 13.19 23.62 18.071 12.83 25.08 10.24 1.57 26.18 9.65 8.86 4.13 1.38 1.77 1940 15QVPF2 14.37 14.65 27.17 20.669 14.57 28.35 11.61 1.97 28.94 9.57 10.43 5.31 1.65 2.05 2650 22

97QU-VP2NK003Z Ainch

QMotor-reducer

VVertical L.S.S.

PParallel shafts

C FSize


Two stages2

UD

TypeD -m6 L X Y Z DB LB XB YB ZB DP(1) JP PB(1) PC(1)

QVPC2 4.1339 8.27 1.10 4.37 M24 1.8898 k6 4.33 0.55 2.03 M16 4.33 1.14 2.95 4.33QVPD2 4.5276 8.27 1.26 4.80 M24 2.2835 m6 5.51 0.63 2.44 M20 4.33 0.75 2.56 4.33QVPE2 5.3150 9.84 1.42 5.63 M30 2.5591 m6 5.51 0.71 2.72 M20 5.71 -0.04 1.97 5.71QVPF2 6.1024 9.84 1.57 6.46 M30 2.9528 m6 5.51 0.79 3.13 M20 5.71 0.24 2.36 5.71

Pump


(1) Additional spacefor pump removal tobe provided

(2) Grease lubrica-tion point

(3) Max. dimensions

(4) To be specifiedseparately





X

Y

D

Z


Shafts (5)

JSTR

L DP

D

HS

LB

JMDB

CB

JP

PB

(2)

LM

DM

FP

CU

CM

CV

4xT

FP

RM

EE

RM

FP

FP

RM

M

E

E

C

AB

AB

RM

C

(2)

PC

BC

Bottom view

Nema motor Hansen P4

QVPC2 QVPD2 QVPE2 QVPF2

CM JM CM JM CM JM CM JM

Upon request

Frame DM LM(3)

Coupling(4)

ansen

C22

ZB DIN 332

"D"DB

YB

XB

UD UU


QGear unit

VVertical L.S.S.

PParallel shafts

C HSize


Three stages3


(2) Standard for gearunits sizes G and H





D - m6 L X Y Z DC LC XC YC ZC

QVPC3 4.1339 8.27 1.10 4.37 M24 1.4961 k6 4.33 0.39 1.61 M12QVPD3 4.5276 8.27 1.26 4.80 M24 1.6535 k6 4.33 0.47 1.77 M16QVPE3 5.3150 9.84 1.42 5.63 M30 1.8898 k6 4.33 0.55 2.03 M16QVPF3 6.1024 9.84 1.57 6.46 M30 2.2835 m6 5.51 0.63 2.44 M20QVPG3 7.0866 11.81 1.77 7.48 M30 2.5591 m6 5.51 0.71 2.72 M20QVPH3 7.4803 13.78 1.77 7.87 M30 2.5591 m6 5.51 0.71 2.72 M20

Type AB BC BF C CC CK CU CV E FP HL HS JS KT M RM T TRWeight

lbOil

US gal

QVPC3 10.04 11.02 - 18.50 17.874 6.81 10.24 22.24 7.87 1.38 27.36 22.13 8.03 18.78 6.50 3.74 1.10 1.50 860 5.8QVPD3 11.22 11.42 - 20.87 20.591 7.87 11.42 25.98 8.86 1.57 30.12 24.33 8.15 21.26 7.68 3.74 1.38 1.57 1230 8.7QVPE3 12.60 13.07 - 23.62 23.898 9.21 12.83 29.49 10.24 1.57 34.65 26.77 9.65 24.02 8.86 4.13 1.38 1.77 1900 12QVPF3 14.37 14.65 - 27.17 27.402 10.43 14.57 33.54 11.61 1.97 38.19 31.10 9.57 27.68 10.43 5.31 1.65 2.05 2710 18.5QVPG3 17.72 17.91 19.29 33.86 31.496 11.97 17.91 38.70 14.76 2.17 42.87 32.09 11.61 30.20 12.99 5.91 1.89 2.56 3970 26QVPH3 17.72 17.91 19.29 33.86 34.331 11.97 17.91 41.54 14.76 2.17 44.84 32.09 13.58 30.20 12.99 5.91 1.89 2.56 4190 28


TypeShafts (3)

X

Y

D

Z

CC

DC

LC

HS

LTR

JS

D

HL

CK

(1)

RMFP E E FP

RM

C

FP

C

E

RM

E

RM

FP

4xT

CVCU

M

AB AB

KT(1)

BC BF

(2)

(2)

C23

ansen

ZCDIN332"D"

DC

YC

XC

UD UU


QGear unit

VVertical L.S.S.

PParallel shafts

J TSize


Three stages3


(2) 4x jacking screw





TypeD -m6 L X Y Z ZZ

DC -m6 LC XC YC ZC

QVPJ3 8.2677 13.78 1.97 8.70 M30 - 2.9528 5.51 0.79 3.13 M20QVPK3 9.0551 16.14 1.97 9.49 M30 - 2.9528 5.51 0.79 3.13 M20QVPL3 9.8425 16.14 2.20 10.31 M30 - 3.3465 6.69 0.87 3.54 M20QVPM3 10.6299 18.50 2.48 11.10 3 x M24 5.512 3.3465 6.69 0.87 3.54 M20QVPN3 11.8110 18.50 2.76 12.36 3 x M24 5.512 3.9370 8.27 1.10 4.17 M24QVPP3 12.5984 20.08 2.76 13.15 3 x M24 5.512 3.9370 8.27 1.10 4.17 M24QVPQ3 13.3858 21.65 3.15 13.98 3 x M24 9.843 3.9370 8.27 1.10 4.17 M24QVPR3 14.1732 23.62 3.15 14.76 3 x M24 9.843 4.7244 8.27 1.26 5.00 M24QVPS3 14.9606 25.59 3.15 15.55 3 x M24 9.843 4.7244 8.27 1.26 5.00 M24QVPT3 15.7480 25.59 3.54 16.42 3 x M24 9.843 4.7244 8.27 1.26 5.00 M24


Shafts (3)

Type A AB BC BF C CC CK CU CV E FP FS HL HS JS KT M N NR RM RP T TRWeight

lbOil

US gal

QVPJ3 39.76 20.67 21.85 25.00 54.33 37.087 13.82 21.26 45.08 16.14 2.17 17.72 48.62 34.06 13.46 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6390 78QVPK3 39.76 20.67 21.85 25.00 54.33 40.157 13.82 21.26 48.15 16.14 2.17 17.72 50.98 34.06 15.83 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 7280 83QVPL3 48.82 25.20 26.18 29.53 64.96 43.701 15.71 25.79 52.76 20.08 2.36 20.08 56.26 39.76 15.75 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11240 132QVPM3 48.82 25.20 26.18 29.53 64.96 47.559 15.71 25.79 56.61 20.08 2.36 20.08 58.62 39.76 18.11 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 12350 137QVPN3 50.00 25.79 26.97 30.12 63.58 51.299 18.74 23.62 61.30 17.72 2.36 23.43 60.43 44.29 17.91 41.93 18.11 22.64 19.88 7.09 6.50 2.20 3.35 18080 129QVPP3 50.00 25.79 26.97 30.12 68.78 53.898 18.74 26.22 63.66 20.31 2.36 23.43 62.80 44.29 19.49 42.72 18.90 22.64 19.88 7.09 6.50 2.20 3.35 19850 140QVPQ3 50.00 29.92 26.97 34.25 78.31 58.661 18.74 30.98 68.43 25.08 2.36 23.43 64.37 44.29 21.06 42.72 20.08 22.64 19.88 7.09 6.50 2.20 3.35 22930 159QVPR3 55.91 28.74 30.31 33.07 75.00 61.142 21.97 27.95 72.17 21.26 2.76 26.97 71.46 50.00 23.03 48.03 21.26 25.20 22.05 8.07 7.28 2.60 3.74 27560 190QVPS3 55.91 30.31 30.31 34.65 80.98 64.134 21.97 30.94 75.16 24.25 2.76 26.97 74.21 50.00 25.00 48.82 22.05 25.20 22.05 8.07 7.28 2.60 3.74 30200 206QVPT3 55.91 33.07 30.31 37.40 86.89 67.087 21.97 33.90 78.11 27.20 2.76 26.97 74.21 50.00 25.00 48.82 23.23 25.20 22.05 8.07 7.28 2.60 3.74 32850 219

X

Y

D

Z

Z X

Y

DZZ

CC

DC

LC

HS

HL

JSTR

L

D

(2)

CK

(1)

RM

N

N

A

FPCU

M

RM

FP

FP

RM

E E

C

RM

FS

RM

FP

FP

RP

NR

NR

FP

RP

6xT

CV

AB AB

KT (1)

BC BF

ansen

C24

ZCDIN332"D"

DC

YC

XC

UD


QMotor-reducer

VVertical L.S.S.

PParallel shafts

C HSize


Three stages3

D - m6 L X Y Z DC LC XC YC ZC

QVPC3 4.1339 8.27 1.10 4.37 M24 1.4961 k6 4.33 0.39 1.61 M12QVPD3 4.5276 8.27 1.26 4.80 M24 1.6535 k6 4.33 0.47 1.77 M16QVPE3 5.3150 9.84 1.42 5.63 M30 1.8898 k6 4.33 0.55 2.03 M16QVPF3 6.1024 9.84 1.57 6.46 M30 2.2835 m6 5.51 0.63 2.44 M20QVPG3 7.0866 11.81 1.77 7.48 M30 2.5591 m6 5.51 0.71 2.72 M20QVPH3 7.4803 13.78 1.77 7.87 M30 2.5591 m6 5.51 0.71 2.72 M20

Type AB BC BF C CC CU CV E FP HS JS M RM T TRWeight

lbOil

US gal

QVPC3 10.04 11.02 - 18.50 17.874 10.24 22.24 7.87 1.38 22.13 8.03 6.50 3.74 1.10 1.50 940 5.8QVPD3 11.22 11.42 - 20.87 20.591 11.42 25.98 8.86 1.57 24.33 8.15 7.68 3.74 1.38 1.57 1320 8.7QVPE3 12.60 13.07 - 23.62 23.898 12.83 29.49 10.24 1.57 26.77 9.65 8.86 4.13 1.38 1.77 2010 12QVPF3 14.37 14.65 - 27.17 27.402 14.57 33.54 11.61 1.97 31.10 9.57 10.43 5.31 1.65 2.05 2870 18.5QVPG3 17.72 17.91 19.29 33.86 31.496 17.91 38.70 14.76 2.17 32.09 11.61 12.99 5.91 1.89 2.56 4190 26QVPH3 17.72 17.91 19.29 33.86 34.331 17.91 41.54 14.76 2.17 32.09 13.58 12.99 5.91 1.89 2.56 4520 28


Nema motor Hansen P4 QVPC3 QVPD3 QVPE3 QVPF3 QVPG3 QVPH3

CM JM CM JM CM JM CM JM CM JM CM JM

Upon request

Frame DM LM(2)

Coupling

(3)


(2) Max. dimensions

(3) To be specifiedseparately






TypeShafts (5)

X

Y

D

Z

Bottom view


JSTR

L

D

HS

LC

JM

LM

DC

CC

(1)

DM

AB

AB

E

FPCU

CM

CV

4xT

RM

FPEE

C

RM

FP

FP

RM

E

RM

MC

(1)

BC

BF

(4)

(4)

C25

ansen

ZCDIN332"D"

DC

YC

XC

UD


QGear unit

VVertical L.S.S.

PParallel shafts

J MSize


Three stages3



(3) Max. dimensions

(4) To be specified separately






DC -m6 LC XC YC ZC

QVPJ3 8.2677 13.780 1.97 8.70 M30 - 2.9528 5.51 0.79 3.13 M20QVPK3 9.0551 16.142 1.97 9.49 M30 - 2.9528 5.51 0.79 3.13 M20QVPL3 9.8425 16.142 2.20 10.31 M30 - 3.3465 6.69 0.87 3.54 M20QVPM3 10.6299 18.504 2.48 11.10 3 x M24 5.512 3.3465 6.69 0.87 3.54 M20


Shafts (5)

Type A AB BC BF C CC CK CU CV E FP FS HS JS KT M N NR RM RP T TRWeight

lbOil

US galQVPJ3 39.76 20.67 21.85 25.00 54.33 37.087 13.82 21.26 45.08 16.14 2.17 17.72 34.06 13.46 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6390 78QVPK3 39.76 20.67 21.85 25.00 54.33 40.157 13.82 21.26 48.15 16.14 2.17 17.72 34.06 15.83 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 7280 83QVPL3 48.82 25.20 26.18 29.53 64.96 43.701 15.71 25.79 52.76 20.08 2.36 20.08 39.76 15.75 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11240 132QVPM3 48.82 25.20 26.18 29.53 64.96 47.559 15.71 25.79 56.61 20.08 2.36 20.08 39.76 18.11 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 12350 137

X

Y

D

Z

Z X

Y

DZZ

CC

DC

LC

HS

JSTR

L

D

(2)

(1)

JM

LM

DM

RM

N

N

A

FPCU

M

RM

FP

FP

RM

E E

C

RM

FS

RM

FP

FP

RP

NR

NR

FP

RP

6xT

CV

BC

BF

CM

AB

AB

Bottom view


Nema motor Hansen P4 QVPJ3 QVPK3 QVPL3 QVPM3

CM JM CM JM CM JM CM JM

Upon request

Frame DM LM(3)

Coupling

(4)

ansen

C26

ZCDIN332"D"

DC

YC

XC

UD UU


QGear unit

VVertical L.S.S.

PParallel shafts

D HSize


Four stages4







D - m6 L X Y Z DD - k6DN

max LDLV

min XD YD ZD

QVPD4 4.5276 8.27 1.26 4.80 M24 1.4961 - 3.23 - 0.39 1.61 M12QVPE4 5.3150 9.84 1.42 5.63 M30 1.4961 - 3.23 - 0.39 1.61 M12QVPF4 6.1024 9.84 1.57 6.46 M30 1.6535 4.72 3.23 0.35 0.47 1.77 M16QVPG4 7.0866 11.81 1.77 7.48 M30 1.8898 6.10 3.23 0.39 0.55 2.03 M16QVPH4 7.4803 13.78 1.77 7.87 M30 1.8898 6.10 3.23 0.39 0.55 2.03 M16

Type AB BC BF C CC CK CU CV E FP HD HL HS JS KT M RM T TRWeight

lbOil

US gal

QVPD4 11.22 11.42 - 20.87 20.591 7.87 11.42 25.98 8.86 1.57 4.29 30.12 23.70 8.15 21.26 7.68 3.74 1.38 1.57 1260 8.7QVPE4 12.60 13.07 - 23.62 23.898 9.21 12.83 29.49 10.24 1.57 4.29 34.65 25.47 9.65 24.02 8.86 4.13 1.38 1.77 1920 13QVPF4 14.37 14.65 - 27.17 27.402 10.43 14.57 33.54 11.61 1.97 4.96 38.19 28.27 9.57 27.68 10.43 5.31 1.65 2.05 2760 18QVPG4 17.72 17.91 19.29 33.86 31.496 11.97 17.91 38.70 14.76 2.17 5.83 42.87 28.94 11.61 30.20 12.99 5.91 1.89 2.56 4030 27QVPH4 17.72 17.91 19.29 33.86 34.331 11.97 17.91 41.54 14.76 2.17 5.83 44.84 28.94 13.58 30.20 12.99 5.91 1.89 2.56 4250 30


TypeShafts (3)

X

Y

D

Z

CC

DD

LD

HS

L TRJS

HL

D

CK

(1)

HD

AB AB

KT(1)

BC BF

(2)

(2)

DN

LV

FP

CU CV

4xT

C

E

E

RM

RM

FP

FP

RM RM

FPEE

C

M

C27

ansen

ZD DIN 332

"D"DD

YD

XD

UD UU


QGear unit

VVertical L.S.S.

PParallel shafts

J QSize


Four stages4







TypeD-m6 L X Y Z ZZ DD

DNmax LD

LVmin XD YD ZD

QVPJ4 8.2677 13.78 1.97 8.70 M30 - 2.2835 6.89 4.13 0.47 0.63 2.44 M20QVPK4 9.0551 16.14 1.97 9.49 M30 - 2.2835 6.89 4.13 0.47 0.63 2.44 M20QVPL4 9.8425 16.14 2.20 10.31 M30 - 2.5591 - 4.13 - 0.71 2.72 M20QVPM4 10.6299 18.50 2.48 11.10 3 x M24 5.512 2.5591 - 4.13 - 0.71 2.72 M20QVPN4 11.8110 18.50 2.76 12.36 3 x M24 5.512 2.9528 - 4.13 - 0.79 3.13 M20QVPP4 12.5984 20.08 2.76 13.15 3 x M24 5.512 2.9528 - 4.13 - 0.79 3.13 M20QVPQ4 13.3858 21.65 3.15 13.98 3 x M24 9.843 2.9528 - 4.13 - 0.79 3.13 M20

Type A AB BC BF C CC CK CU CV E FP FS HD HL HS JS KT M N NR RM RP T TRWeight

lbOil

US gal

QVPJ4 39.76 20.67 21.85 25.00 54.33 37.087 13.82 21.26 45.08 16.14 2.17 17.72 6.73 48.62 31.89 13.46 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6610 81QVPK4 39.76 20.67 21.85 25.00 54.33 40.157 13.82 21.26 48.15 16.14 2.17 17.72 6.73 50.98 31.89 15.83 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 7500 86QVPL4 48.82 25.20 26.18 29.53 64.96 43.701 15.71 25.79 52.76 20.08 2.36 20.08 7.76 56.26 37.01 15.75 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11460 137QVPM4 48.82 25.20 26.18 29.53 64.96 47.559 15.71 25.79 56.61 20.08 2.36 20.08 7.76 58.62 37.01 18.11 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 12570 143QVPN4 50.00 25.79 26.97 30.12 63.58 51.299 18.74 23.62 61.30 17.72 2.36 23.43 8.90 60.43 40.35 17.91 41.93 18.11 22.64 19.88 7.09 6.50 2.20 3.35 18300 132QVPP4 50.00 25.79 26.97 30.12 68.78 53.898 18.74 26.22 63.66 20.31 2.36 23.43 8.90 62.80 40.35 19.49 42.72 18.90 22.64 19.88 7.09 6.50 2.20 3.35 20100 143QVPQ4 50.00 29.92 26.97 34.25 78.31 58.661 18.74 30.98 68.43 25.08 2.36 23.43 8.90 64.37 40.35 21.06 42.72 20.08 22.64 19.88 7.09 6.50 2.20 3.35 23150 165


Shafts (3)

X

Y

D

Z

Z X

Y

DZZ

HL

TRJS

D

HS

LD

DD

CC

L (2)

CK

(1)

FPCU CV

6xT FP

RP

NR

NR

RP

FPRM

FPFS

RM

EE

C

FP

RMFP

RM

N

A

N

RM

HD

AB AB

KT (1)

BC BF

DN

LV

ansen

C28

ZD DIN 332

"D"DD

YD

XD

Type AB BC C CU E FP HL HS IB JS K M RM T TRWeight

lbOil

US gal

QVRC2 10.04 11.02 18.50 10.24 7.87 1.38 27.91 8.46 31.97 8.03 7.20 6.50 3.74 1.10 1.50 840 5.8QVRD2 11.22 11.42 20.87 11.42 8.86 1.57 30.79 9.65 36.06 8.15 9.06 7.68 3.74 1.38 1.57 1230 7.7QVRE2 12.60 13.19 23.62 12.83 10.24 1.57 35.43 11.02 39.84 9.65 9.33 8.86 4.13 1.38 1.77 1850 13QVRF2 14.37 14.65 27.17 14.57 11.61 1.97 37.20 12.60 44.06 9.57 10.59 10.43 5.31 1.65 2.05 2840 20

97QU-VR2N0004Z Ainch

QGear unit

VVertical L.S.S.

RRight-angle shafts

C FSize


Two stages2

CD CU

(3)

TypeD -m6 L X Y Z DB LB XB YB ZB DF

DNmax LN LP

LRmin CA DP(1) JP PB(1) PC(1)

QVRC2 4.1339 8.27 1.10 4.37 M24 1.9685 k6 7.09 0.55 2.11 M16 12.60 6.30 6.10 1.77 0.79 7.756 5.71 1.89 3.94 5.71QVRD2 4.5276 8.27 1.26 4.80 M24 2.3622 m6 8.27 0.71 2.52 M20 16.14 8.27 7.28 2.76 1.18 8.898 5.71 1.61 3.74 5.71QVRE2 5.3150 9.84 1.42 5.63 M30 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18 10.315 6.69 1.69 2.76 11.02QVRF2 6.1024 9.84 1.57 6.46 M30 2.9528 m6 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57 11.772 6.69 1.50 2.56 11.02

Pump (3)

Shaft arrangements (front view)(1) Space for pumpremoval

(2) Grease lubrica-tion point only forshaft arrangementCD

(3) For sizes E and Fwith shaft arrange-ment CD: motorpumpat dipstick's side is re-quired. Refer to us





FanShafts (4)

X

Y

D

Z

HL

JSTR

L

D

DP

JP

CA

HS

K

D

L

PB

(2)

FP

RM

E

C

E

RM

FP

FP

RM

E E

C

FP

RM

M

CU IB

LB

DB

4xT

AB AB

(2)

PC

BC

IB

LN

DFDN

LR

LP

C29

ansen

ZB DIN 332

"D"DB

YB

XB

Type A AB BC C CU E FP FS HL HS IB JS M N NR RM RP T TRWeight

lbOil

US gal

QVRG2 30.31 15.94 17.13 44.09 16.54 12.01 1.97 16.14 41.30 15.35 48.86 11.61 11.42 13.19 10.83 5.51 4.72 1.65 2.36 3750 28QVRH2 30.31 17.13 17.13 48.50 18.11 13.58 1.97 17.40 43.27 15.35 51.69 13.58 12.20 13.19 10.83 5.51 4.72 1.65 2.36 3970 31QVRJ2 39.76 20.67 21.85 54.33 21.26 16.14 2.17 17.72 48.62 17.72 56.77 13.46 15.35 17.72 15.16 6.30 5.51 1.89 2.76 5950 55QVRK2 39.76 20.67 21.85 54.33 21.26 16.14 2.17 17.72 50.98 17.72 59.84 15.83 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6830 57QVRL2 48.82 25.20 26.18 64.96 25.79 20.08 2.36 20.08 56.26 20.67 68.58 15.75 16.14 22.05 19.29 6.89 6.10 2.20 3.15 10360 106QVRM2 48.82 25.20 26.18 64.96 25.79 20.08 2.36 20.08 58.62 20.67 72.44 18.11 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11460 114


QGear unit

VVertical L.S.S.

RRight-angle shafts

G MSize


Two stages2

CD CU

TypeD - m6 L X Y Z ZZ

DB -m6 LB XB YB ZB DF

DNmax LN LP

LRmin CP

QVRG2 7.0866 11.81 1.77 7.48 M30 - 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 30.31QVRH2 7.4803 13.78 1.77 7.87 M30 - 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57 31.88QVRJ2 8.2677 13.78 1.97 8.70 M30 - 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 36.61QVRK2 9.0551 16.14 1.97 9.49 M30 - 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57 36.61QVRL2 9.8425 16.14 2.20 10.31 M30 - 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 41.34QVRM2 10.6299 18.50 2.48 11.10 3 x M24 5.512 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57 41.34

Motor pump








FanShafts (3)

X

Y

D

Z

HL

JSTR L

D

HS

CP

(2)

D

L

(1)

AB AB

(1)

BC

CU IB

6xTFP

RM

RM

N

N

A

FP

FP

RM

E E

C

FS

RMRM

FP

RP

RPLB

DB NR

FP

NR

FP

IB

LN

DFDN

LR

LP

Z X

Y

DZZ

ansen

C30

ZB DIN 332

"D"DB

YB

XB


QGear unit

VVertical L.S.S.

RRight-angle shafts

C HSize


Three stages3







TypeD -m6 L X Y Z DC LC XC YC ZC DF

DNmax LN LP

LRmin

QVRC3 4.1339 8.27 1.10 4.37 M24 1.3780 k6 5.91 0.39 1.50 M12 12.60 6.30 4.92 1.77 0.79QVRD3 4.5276 8.27 1.26 4.80 M24 1.7717 k6 7.09 0.55 1.91 M16 12.60 6.30 6.10 1.77 0.79QVRE3 5.3150 9.84 1.42 5.63 M30 1.9685 k6 7.09 0.55 2.11 M16 12.60 6.30 6.10 1.77 0.79QVRF3 6.1024 9.84 1.57 6.46 M30 2.3622 m6 8.27 0.71 2.52 M20 16.14 8.27 7.28 2.76 1.18QVRG3 7.0866 11.81 1.77 7.48 M30 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18QVRH3 7.4803 13.78 1.77 7.87 M30 2.5591 m6 8.27 0.71 2.72 M20 16.14 8.27 7.28 2.76 1.18

Type AB BC BF C CU E FP HL HS IC JS K KT M RM T TRWeight

lbOil

US gal

QVRC3 10.04 11.02 - 18.50 10.24 7.87 1.38 27.36 11.42 34.06 8.03 5.91 18.78 6.50 3.74 1.10 1.50 1070 6.1QVRD3 11.22 11.42 - 20.87 11.42 8.86 1.57 30.12 12.99 39.06 8.15 6.54 21.26 7.68 3.74 1.38 1.57 1490 9QVRE3 12.60 13.07 - 23.62 12.83 10.24 1.57 34.65 14.76 42.28 9.65 7.20 24.02 8.86 4.13 1.38 1.77 2150 13QVRF3 14.37 14.65 - 27.17 14.57 11.61 1.97 38.19 16.93 47.83 9.57 8.27 27.68 10.43 5.31 1.65 2.05 2780 18.5QVRG3 17.72 17.91 19.29 33.86 17.91 14.76 2.17 42.87 16.93 53.27 11.61 9.33 30.20 12.99 5.91 1.89 2.56 4080 29QVRH3 17.72 17.91 19.29 33.86 17.91 14.76 2.17 44.84 16.93 56.10 13.58 9.33 30.20 12.99 5.91 1.89 2.56 4300 30

FanShafts (3)

X

Y

D

Z

CD CU CD CU


Type QVRG3 & QVRH3Type QVRC3 QVRF3

HL

TRJS L

D

HS

K

(1)

AB AB

KT(1)

BC BF

(2)

(2)

FP

RM

E

C

E

RM

FP

FP

RM

E E

C

FP

RM

4xT

ICCU

M

LC

DC

IC

LN

LP

DF

LR

DN

C31

ansen

ZCDIN332"D"

DC

YC

XC







CD CU


QGear unit

VVertical L.S.S.

RRight-angle shafts

J TSize


Three stages3


DC -m6 LC XC YC ZC DF

DNmax LN LP

LRmin

QVRJ3 8.2677 13.78 1.97 8.70 M30 - 2.9528 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57QVRK3 9.0551 16.14 1.97 9.49 M30 - 2.9528 8.27 0.79 3.13 M20 23.62 11.02 7.28 0.39 1.57QVRL3 9.8425 16.14 2.20 10.31 M30 - 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57QVRM3 10.6299 18.50 2.48 11.10 3 x M24 5.512 3.9370 8.27 1.10 4.17 M24 23.62 11.02 7.28 0.39 1.57QVRN3 11.8110 18.50 2.76 12.36 3 x M24 5.512 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57QVRP3 12.5984 20.08 2.76 13.15 3 x M24 5.512 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57QVRQ3 13.3858 21.65 3.15 13.98 3 x M24 9.843 4.7244 8.27 1.26 5.00 M24 23.62 11.02 7.28 0.39 1.57QVRR3 14.1732 23.62 3.15 14.76 3 x M24 9.843 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57QVRS3 14.9606 25.59 3.15 15.55 3 x M24 9.843 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57QVRT3 15.7480 25.59 3.54 16.42 3 x M24 9.843 5.5118 9.84 1.42 5.83 M30 20.87 11.02 8.86 3.94 1.57

Type A AB BC BF C CU E FP FS HL HS IC JS K KT M N NR RM RP T TRWeight

lbOil

US galQVRJ3 39.76 20.67 21.85 25.00 54.33 21.26 16.14 2.17 17.72 48.62 17.72 60.47 13.46 10.59 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6610 81QVRK3 39.76 20.67 21.85 25.00 54.33 21.26 16.14 2.17 17.72 50.98 17.72 63.54 15.83 10.59 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 7500 86QVRL3 48.82 25.20 26.18 29.53 64.96 25.79 20.08 2.36 20.08 56.26 20.67 68.82 15.75 12.99 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11460 137QVRM3 48.82 25.20 26.18 29.53 64.96 25.79 20.08 2.36 20.08 58.62 20.67 72.68 18.11 12.99 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 12570 143QVRN3 50.00 25.79 26.97 30.12 63.58 23.62 17.72 2.36 23.43 60.43 21.65 79.88 17.91 15.08 41.93 18.11 22.64 19.88 7.09 6.50 2.20 3.35 18300 132QVRP3 50.00 25.79 26.97 30.12 68.78 26.22 20.31 2.36 23.43 62.80 21.65 82.48 19.49 15.08 42.72 18.90 22.64 19.88 7.09 6.50 2.20 3.35 20100 143QVRQ3 50.00 29.92 26.97 34.25 78.31 30.98 25.08 2.36 23.43 64.37 21.65 87.24 21.06 15.08 42.72 20.08 22.64 19.88 7.09 6.50 2.20 3.35 23150 165QVRR3 55.91 28.74 30.31 33.07 75.00 27.95 21.26 2.76 26.97 71.46 24.61 96.34 23.03 18.58 48.03 21.26 25.20 22.05 8.07 7.28 2.60 3.74 28000 198QVRS3 55.91 30.31 30.31 34.65 80.98 30.94 24.25 2.76 26.97 74.21 24.61 99.33 25.00 18.58 48.82 22.05 25.20 22.05 8.07 7.28 2.60 3.74 30650 214QVRT3 55.91 33.07 30.31 37.40 86.89 33.90 27.20 2.76 26.97 74.21 24.61 102.28 25.00 18.58 48.82 23.23 25.20 22.05 8.07 7.28 2.60 3.74 33290 227


FanShafts (3)

X

Y

D

Z

Z X

Y

DZZ

HL

JSTR

L

D

HS

K

(2)

(1)

CU IC

6xT FP LC

RPNR

DC

NRRP

FPFP

RM

N

A

N

RM

FP

FP

RM

FS

C

EEFP

RM RM

AB AB

KT(1)

BC BF

IC

LN

LP

DF

LR

DN

ansen

C32

ZCDIN332"D"

DC

YC

XC


QGear unit

VVertical L.S.S.

RRight-angle shafts

D HSize


Four stages4







Type

D - m6 L X Y Z DD - k6 LD XD YD ZD

QVRD4 4.5276 8.27 1.26 4.80 M24 1.3780 5.91 0.39 1.50 M12QVRE4 5.3150 9.84 1.42 5.63 M30 1.3780 5.91 0.39 1.50 M12QVRF4 6.1024 9.84 1.57 6.46 M30 1.7717 7.09 0.55 1.91 M16QVRG4 7.0866 11.81 1.77 7.48 M30 1.9685 7.09 0.55 2.11 M16QVRH4 7.4803 13.78 1.77 7.87 M30 1.9685 7.09 0.55 2.11 M16

Type AB BC BF C CU E FP HL HS ID JS K KT M RM T TRWeight

lbOil

US gal

QVRD4 11.22 11.42 - 20.87 11.42 8.86 1.57 30.12 12.99 41.06 8.15 6.54 21.26 7.68 3.74 1.38 1.57 1300 8.7QVRE4 12.60 13.07 - 23.62 12.83 10.24 1.57 34.65 14.76 44.37 9.65 7.20 24.02 8.86 4.13 1.38 1.77 1980 12QVRF4 14.37 14.65 - 27.17 14.57 11.61 1.97 38.19 16.93 50.83 9.57 8.27 27.68 10.43 5.31 1.65 2.05 2820 20QVRG4 17.72 17.91 19.29 33.86 17.91 14.76 2.17 42.87 16.93 55.71 11.61 9.33 30.20 12.99 5.91 1.89 2.56 4140 28QVRH4 17.72 17.91 19.29 33.86 17.91 14.76 2.17 44.84 16.93 58.54 13.58 9.33 30.20 12.99 5.91 1.89 2.56 4370 30

Shafts (3)

X

Y

D

Z

CD CU


HL

JSTR

L

D

HS

K

(1)

AB AB

KT(1)

BC BF

(2)

(2)

CU ID

FP

E

C

E

RM

FP

FP

RM

E E FP

C

RM

4xT LD

DD

RM

M

C33

ansen

ZD DIN 332

"D"DD

YD

XD








QGear unit

VVertical L.S.S.

RRight-angle shafts

J TSize


Four stages4

Type A AB BC BF C CU E FP FS HL HS ID JS K KT M N NR RM RP T TRWeight

lbOil

US gal

QVRJ4 39.76 20.67 21.85 25.00 54.33 21.26 16.14 2.17 17.72 48.62 17.72 64.25 13.46 10.59 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 6840 81QVRK4 39.76 20.67 21.85 25.00 54.33 21.26 16.14 2.17 17.72 50.98 17.72 67.32 15.83 10.59 34.02 15.35 17.72 15.16 6.30 5.51 1.89 2.76 7720 86QVRL4 48.82 25.20 26.18 29.53 64.96 25.79 20.08 2.36 20.08 56.26 20.67 73.23 15.75 12.09 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 11700 137QVRM4 48.82 25.20 26.18 29.53 64.96 25.79 20.08 2.36 20.08 58.62 20.67 77.09 18.11 12.09 40.31 16.14 22.05 19.29 6.89 6.10 2.20 3.15 12800 143QVRN4 50.00 25.79 26.97 30.12 63.58 23.62 17.72 2.36 23.43 60.43 21.65 83.58 17.91 14.13 41.93 18.11 22.64 19.88 7.09 6.50 2.20 3.35 18500 132QVRP4 50.00 25.79 26.97 30.12 68.78 26.22 20.31 2.36 23.43 62.80 21.65 86.18 19.49 14.13 42.72 18.90 22.64 19.88 7.09 6.50 2.20 3.35 20300 143QVRQ4 50.00 29.92 26.97 34.25 78.31 30.98 25.08 2.36 23.43 64.37 21.65 90.94 21.06 14.13 42.72 20.08 22.64 19.88 7.09 6.50 2.20 3.35 23400 165QVRR4 55.91 28.74 30.31 - 75.00 27.95 21.26 2.76 26.97 71.46 24.61 96.57 23.03 16.93 48.03 21.26 25.20 22.05 8.07 7.28 2.60 3.74 28500 198QVRS4 55.91 30.31 30.31 - 80.98 30.94 24.25 2.76 26.97 74.21 24.61 99.57 25.00 16.93 48.82 22.05 25.20 22.05 8.07 7.28 2.60 3.74 31100 214QVRT4 55.91 33.07 30.31 - 86.89 33.90 27.20 2.76 26.97 74.21 24.61 102.52 25.00 16.93 48.82 23.23 25.20 22.05 8.07 7.28 2.60 3.74 33700 227

Type

D - m6 L X Y Z ZZ DD - m6 LD XD YD ZD

QVRJ4 8.2677 13.78 1.97 8.70 M30 - 2.3622 8.27 0.71 2.52 M20QVRK4 9.0551 16.14 1.97 9.49 M30 - 2.3622 8.27 0.71 2.52 M20QVRL4 9.8425 16.14 2.20 10.31 M30 - 2.5591 8.27 0.71 2.72 M20QVRM4 10.6299 18.50 2.48 11.10 3 x M24 5.512 2.5591 8.27 0.71 2.72 M20QVRN4 11.8110 18.50 2.76 12.36 3 x M24 5.512 2.9528 8.27 0.79 3.13 M20QVRP4 12.5984 20.08 2.76 13.15 3 x M24 5.512 2.9528 8.27 0.79 3.13 M20QVRQ4 13.3858 21.65 3.15 13.98 3 x M24 9.843 2.9528 8.27 0.79 3.13 M20QVRR4 14.1732 23.62 3.15 14.76 3 x M24 9.843 3.9370 8.27 1.10 4.17 M24QVRS4 14.9606 25.59 3.15 15.55 3 x M24 9.843 3.9370 8.27 1.10 4.17 M24QVRT4 15.7480 25.59 3.54 16.42 3 x M24 9.843 3.9370 8.27 1.10 4.17 M24

Shafts (3)

X

Y

D

Z

Z X

Y

DZZ

CD CU


HL

TRJS L

D

K

HS

(2)

(1)

AB AB

KT (1)

BC BF

CU ID

6xT FP

RPNR

LD

DD

NR

FP

RP

FP

RM

FS

C

E

RM

E

RM

FP

FP

RM

N

A

RM

N

FP

M

ansen

C34

ZD DIN 332

"D"DD

YD

XD

Cooling coil

QGear unit

VVertical L.S.S.

P/R C TSize Stages

2 4

Type SizeQV..3 C D E F G H J K L M

C1 13.98 15.16 16.73 18.31 21.65 21.65 25.00 25.00 31.50 31.50

C2 3.54 3.94 3.94 3.94 4.72 4.72 4.53 4.53 4.72 4.72

C3 8.27 9.45 10.24 11.42 15.75 15.75 19.69 19.69 31.50 31.50

Type QV..2 / QV..3 / QV..4 SizePosition C D E F G H J K L M N P Q R S T

Oil sight glass OA 11.42 12.60 13.98 15.75 19.09 19.09 22.44 22.44 26.77 26.77 24.80 27.36 32.09 29.13 32.09 35.04

Drain cock OB 13.39 14.96 16.34 18.90 22.24 22.24 25.79 25.79 30.31 30.31 29.13 31.69 36.42 33.46 36.42 39.37

Oil level switch OC 14.96 16.14 17.72 19.29 22.64 22.64 25.98 25.98 30.12 30.12 28.35 30.91 35.83 32.68 35.63 35.58

Dust-proof breather plug OD 14.17 14.57 15.55 17.13 20.87 20.87 25.59 25.59 29.92 29.92 30.51 30.51 30.51 31.89 31.89 31.89

Flow Switch OE 12.40 13.58 14.96 16.14 - - - - - - - - - - - -

Options


97QU-V000C002Z Binch

�

�

�

�

�

The above mounting positions and dimensions are standard for gear units equipped with one single accessory. They may vary for units equipped with several accessories.


0.500-NPT

C1

C3

C2

OE OD

5 3 2 1 4

OA

OB

OC

Type SizeQV..2 C D E F G H J K L M

C1 13.98 15.16 16.73 18.31 20.28 21.85 25.00 25.00 31.50 31.50

C2 2.95 3.35 3.35 3.35 3.35 3.35 4.53 4.53 4.72 4.72

C3 8.27 9.45 10.24 12.60 15.75 15.75 19.69 19.69 31.50 31.50

C35

ansen

Visit our worldwideSales & Service network at:

www.hansentransmissions.com

mz-500 710

Hansen Transmissions is a pioneering

innovator. The production of high per-

formance gear units stems from an inter-

active partnership with our clients, the

end users and the actively engaged man-

power of our global enterprise. Embracing

design, manufacturing and customer serv-

ice, Hansen Transmissions has grown into

a world leader in its field. Today, we set

high standards for product and working

environment, and for seizing every oppor-

tunity offered by new, environmentally

friendly technologies.

Phone: 540-213-2442Fax: 540-213-2222E-mail: [email protected]

Phone: 905-612-0033Fax: 905-612-0043

USAHansen Transmissions, Inc.33 Lakeview CourtP.O. Box 320Verona, VA 24482

Canada6305 Northam DriveUnit # 8Mississauga, OntarioCanada L4V 1W9

ww

w.h

an

se

na

me

ric

as

.co

m

Hansen Transmissions, Inc. contact info:

Hansen Industrial Gearboxes is a pioneering

ice, Hansen Industrial Gearboxes has grown into

www.sumitomodrive.com/locations

Contact Information: 1-800-SMCYCLO email: [email protected]

Verona, VA facility: 33 Lakeview CourtP.O. Box 320Verona, VA 24482Phone: 540-213-2442 Fax: 540-213-2222

© 2014 Sumitomo Machinery Corporation of America 01.H02.50.001

Hansen P4 Multistage

Documents

Transcript of Hansen P4 Multistage