Handyscope HS6 DIFF - Egmont · 1 x TP-CASE-BB391 Handyscope HS6 DIFF carry case Available options...
2
TiePie engineering Handyscope HS6 DIFF ordering info 2017 Handyscope HS6 DIFF A standard Handyscope HS6 DIFF package contains: • 1 x Handyscope HS6 DIFF 4 channel oscilloscope • 4 x TP-C812B : Isolated Measure Lead BNC to 4 mm banana • 4 x TP-DA10 : Differential attenuator 1:10 • 1 x TP-AC80I-SET : 8 alligator clips large • 1 x TP-AC10I-SET : 8 alligator clips medium • 1 x TP-AC5-SET : alligator clips small • 1 x External power cable (USB) • 1 x TP-UE15WCP1-055200SPA Handyscope power supply • 1 x CDROM with drivers and software • 1 x Instrument manual • 1 x Software manual • 1 x TP-CASE-BB391 Handyscope HS6 DIFF carry case Available options for the Handyscope HS6 DIFF Memory The Handyscope HS6 DIFF has standard 1 MSamples memory, divided over all active channels. With option XM the Handyscope HS6 DIFF gets 256 times more memory, 256 MSamples, divided over all active channels. • Order code XM • Price e 48.00 SureConnect The SureConnect option gives the possibility to verify that your probes make connection to the test subject, and you additionally get the ability to perform resistance measurements on each input channel individually. • Order code: S; SureConnect with resistance measuring • Price e 95.00 SafeGround SafeGround gives the possibility to use the oscilloscope inputs both as single ended and as differential. When the SafeGround option is ordered, it is possible to use the HP-3250I Oscilloscope probe 1:1 - 1:10. This probe has an isolated BNC connector and is suitable to be used with the Handyscope HS6 DIFF with SafeGround option. The HP-3250I probe (e 29.30) needs to be ordered separately. Remark: The HP-3250I probe can only be used when SafeGround is enabled. The SafeGround option can be enabled individually per input channel. When SafeGround is not enabled, the HP-3250I probe cannot be used. • Order code: G; SafeGround, switch between single ended and differential inputs on each channel. • Price e 110.00 Warranty By default, the Handyscope HS6 DIFF has 3 years full carry in warranty. This warranty can be extended to 5 years, with the option -W5 • Order code: -W5; 5 years full carry in warranty. • Price depends on the Handyscope HS6 DIFF model, approximately 4% of the base price of the model TiePie engineering Handyscope HS6 DIFF ordering info 2017 1
Transcript of Handyscope HS6 DIFF - Egmont · 1 x TP-CASE-BB391 Handyscope HS6 DIFF carry case Available options...
TiePie engineering Handyscope HS6 DIFF ordering info 2017Handyscope HS6 DIFF
A standard Handyscope HS6 DIFF package contains:
• 1 x Handyscope HS6 DIFF 4 channel oscilloscope
• 4 x TP-C812B : Isolated Measure Lead BNC to 4 mm banana
• 4 x TP-DA10 : Differential attenuator 1:10
• 1 x TP-AC80I-SET : 8 alligator clips large
• 1 x TP-AC10I-SET : 8 alligator clips medium
• 1 x TP-AC5-SET : alligator clips small
• 1 x External power cable (USB)
• 1 x TP-UE15WCP1-055200SPA Handyscope power supply
• 1 x CDROM with drivers and software
• 1 x Instrument manual
• 1 x Software manual
• 1 x TP-CASE-BB391 Handyscope HS6 DIFF carry case
Available options for the Handyscope HS6 DIFF
Memory
The Handyscope HS6 DIFF has standard 1 MSamples memory, divided over all active channels. With option XM theHandyscope HS6 DIFF gets 256 times more memory, 256 MSamples, divided over all active channels.
• Order code XM
• Price e 48.00
SureConnect
The SureConnect option gives the possibility to verify that your probes make connection to the test subject, and youadditionally get the ability to perform resistance measurements on each input channel individually.
• Order code: S; SureConnect with resistance measuring
• Price e 95.00
SafeGround
SafeGround gives the possibility to use the oscilloscope inputs both as single ended and as differential. When the SafeGroundoption is ordered, it is possible to use the HP-3250I Oscilloscope probe 1:1 - 1:10. This probe has an isolated BNC connectorand is suitable to be used with the Handyscope HS6 DIFF with SafeGround option. The HP-3250I probe (e 29.30) needsto be ordered separately.Remark: The HP-3250I probe can only be used when SafeGround is enabled. The SafeGround option can be enabledindividually per input channel. When SafeGround is not enabled, the HP-3250I probe cannot be used.
• Order code: G; SafeGround, switch between single ended and differential inputs on each channel.
• Price e 110.00
Warranty
By default, the Handyscope HS6 DIFF has 3 years full carry in warranty. This warranty can be extended to 5 years, withthe option -W5
• Order code: -W5; 5 years full carry in warranty.
• Price depends on the Handyscope HS6 DIFF model, approximately 4% of the base price of the model
TiePie engineering Handyscope HS6 DIFF ordering info 2017 1
Handyscope HS6 DIFF base models Ordercode Price
Handyscope HS6 DIFF-1000 1 GS/s sampling rate, 200 MS/s streaming HS6 DIFF-1000 e 1596.00Handyscope HS6 DIFF-500 500 MS/s sampling rate, 50 MS/s streaming HS6 DIFF-500 e 1373.00Handyscope HS6 DIFF-200 200 MS/s sampling rate, 20 MS/s streaming HS6 DIFF-200 e 1197.00Handyscope HS6 DIFF-100 100 MS/s sampling rate, 10 MS/s streaming HS6 DIFF-100 e 1046.00Handyscope HS6 DIFF-50 50 MS/s sampling rate, 5 MS/s streaming HS6 DIFF-50 e 937.00
When ordering a Handyscope HS6 DIFF with options, the option order codes are placed behind the Handyscope HS6 DIFFmodel order code. Example: HS6-DIFF-1000XMSG-W5, a Handyscope HS6 DIFF 1000 MHz with options XM (extendedmemory), S (SureConnect), G (SafeGround) and W5 (5 years warranty).
Additional accessories for the Handyscope HS6 DIFF
Additional accessories for the Handyscope HS6 DIFF need to be ordered separately.
HP-3250I Oscilloscope probe 1:1 - 1:10, 250 MHz Bandwidth (e 29.30)The HP-3250I probe can only be used when the SafeGround option is ordered.
TP-BNCI-100TP-BNCI-100-SET
Measure lead, isolated BNC to 2 x 4 mm banana, 100 cm (e 9.60)Set of 4 x TP-BNCI-100 measure lead (e 33.00)The TP-BNCI-100 measure lead can only be used when the SafeGround option is
ordered.
TP-BP85-SETTP-BP85-GREENTP-BP85-BLUETP-BP85-YELLOWTP-BP85-REDTP-BP85-BLACK
Set of 8 Backprobes, 1x green, 1x blue, 1x yellow, 1x red, 4 x black (e 43.80)1 Backprobe Green (e 6.90)1 Backprobe Blue (e 6.90)1 Backprobe Yellow (e 6.90)1 Backprobe Red (e 6.90)1 Backprobe Black (e 6.90)
TP-C50H Coupling cable to combine two Handyscope HS5/Handyscope HS6 DIFFs to eachother (e 12.30)
TP-RP-HS-REDTP-RP-HS-YELLOWTP-RP-HS-BLACK
Rubber Protector Red (e 21.40)Rubber Protector Yellow (e 21.40)Rubber Protector Black (e 21.40)
TiePie engineeringKoperslagersstraat 378601 WL SneekThe Netherlands
Tel.: +31 515 415 416Fax: +31 515 418 819E-mail: [email protected]
This information is subject to change without notice. Copyright c© 2017 TiePie engineering. All rights reserved. Revision 1.0, February, 2017.
2 TiePie engineering Handyscope HS6 DIFF ordering info 2017
