Hand Operated Tab Notcher
Click here to load reader
-
Upload
visiondesign -
Category
Documents
-
view
214 -
download
0
Transcript of Hand Operated Tab Notcher
7/29/2019 Hand Operated Tab Notcher
http://slidepdf.com/reader/full/hand-operated-tab-notcher 1/1
12
The Di-Acro Tab Notcher is a versatile, heavy-duty tool which cuts any size notch to 6" x 6" with any size tab to
1" in one operation. Both upper and lower cutting blades are adjustable to give you any size and depth, regular
or tab notch combination, within the capacity of the machine. Overlapping tabs can be easily spot-welded to
produce chassis’ and boxes with greater strength.
NOTCHER/ROD PARTER
The Di-Acro Rod Parter is a simple and efficient tool for cutting bar stock. This
precision machine actually “parts off ” rather than cuts, employing a combination
shearing-breaking action. This operation leaves material burr-free, with no
further processing required. One cutting head is stationary; the other moves in
response to a pull on the operating handle. The second head moves just enough
to start a shearing action; once a cut has been made in confined material, the
remaining portion of the rod breaks off. Hard materials such as cold rolled
steel and hard aluminum offer the best “parting” action. Properly
hardened and ground alloy steel cutting heads assure a high degree
of accuracy. Heads are reversible for double service, easily removed for
sharpening and easily replaced.
The Di-Acro Rod Parter has 9 holes
ranging from 1/8” to 5/8” in
1/16” increments.
All holes are .005” oversize.
Hand Operated Rod Parter Model No.2
STANDARD EQUIPMENT
12" x 24" work table with adjustable scales.
Adjustable self-squaring gauges.
HCHC steel notcher blades with reversible
cutting edges.
Stand - heavy duty with work shelf.
>
>
>
Hand Operated Tab Notcher Model No.2
OPTIONAL EQUIPMENT
SPECIFICATIONS
Model No. 2
Maximum capacity, mild steel 16 ga. (1.5mm)Maximum 90° notch; one operation 6" x 6" (152mm x 152mm)Maximum tab 1" (25.4mm)Tonnage 4 lbs. (3.6 kg)Stroke of ram 5/8" (16mm)Machine shipping weight 265 lbs / 120 kgStand shipping weight 85 lbs / 39 kg
Model No. 2
Maximum capacity, CRS bar 5/8" (16mm)Cutting head thickness 1" (25.4mm)Machine shipping weight 65 lbs / 29.5 kgStand shipping weight 60 lbs / 27 kg
SPECIFICATIONS
Model 2 Notcher
>
Space requirements includingoptional floor stand:
W" x D" x H"
24" x 25.5" x 71.75"(609mm x 648mm x 1824mm)
Space requirements includingoptional floor stand:
W" x D" x H"
32" x 16" x 59"(813mm x 406mm x 1499mm)
STANDARD EQUIPMENT
Two standard cutting dies for 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16 & 5/8rod stock.
Ejectomatic Gauge.
Special heads –.015" oversized for cutting
hot rolled stock.
Custom Dies-hex, square or rectangular stock.
Stand - heavy duty with work shelf.
>
OPTIONAL EQUIPMENT
>
D
H
W
DW
>
Ejectomatic Gauge -allows the separate
operations of gauging,
parting and ejecting to
be automatically obtained
in a single working cycle—
especially valuable when
cutting lengths under 6 inches.
Model 2 Rod Parter