12

The Di-Acro Tab Notcher is a versatile, heavy-duty tool which cuts any size notch to 6" x 6" with any size tab to 1" in one operation. Both upper and lower cutting blades are adjustable to give you any size and depth, regular or tab notch combination, within the capacity of the machine. Overlapping tabs can be easily spot-welded to produce chassis’ and boxes with greater strength.

NOTCHER/ROD PARTER

The Di-Acro Rod Parter is a simple and efficient tool for cutting bar stock. This precision machine actually “parts off” rather than cuts, employing a combination shearing-breaking action. This operation leaves material burr-free, with no further processing required. One cutting head is stationary; the other moves in response to a pull on the operating handle. The second head moves just enough to start a shearing action; once a cut has been made in confined material, the remaining portion of the rod breaks off. Hard materials such as cold rolled steel and hard aluminum offer the best “parting” action. Properly hardened and ground alloy steel cutting heads assure a high degree of accuracy. Heads are reversible for double service, easily removed for

sharpening and easily replaced. The Di-Acro Rod Parter has 9 holes ranging from 1/8” to 5/8” in 1/16” increments.

All holes are .005” oversize.

Hand Operated Rod Parter Model No.2

STANDARD EQUIPMENT12" x 24" work table with adjustable scales.

Adjustable self-squaring gauges.

HCHC steel notcher blades with reversible cutting edges.

Stand - heavy duty with work shelf.

>>>

Hand Operated Tab Notcher Model No.2

OPTIONAL EQUIPMENT

SPECIFICATIONSModel No. 2Maximum capacity, mild steel 16 ga. (1.5mm)Maximum 90° notch; one operation 6" x 6" (152mm x 152mm)Maximum tab 1" (25.4mm)Tonnage 4 lbs. (3.6 kg)Stroke of ram 5/8" (16mm)Machine shipping weight 265 lbs / 120 kgStand shipping weight 85 lbs / 39 kg

Model No. 2Maximum capacity, CRS bar 5/8" (16mm)Cutting head thickness 1" (25.4mm)Machine shipping weight 65 lbs / 29.5 kgStand shipping weight 60 lbs / 27 kg

SPECIFICATIONS

Model 2 Notcher

>

Space requirements including optional floor stand:

W" x D" x H"

24" x 25.5" x 71.75" (609mm x 648mm x 1824mm)

Space requirements including optional floor stand:

W" x D" x H"

32" x 16" x 59" (813mm x 406mm x 1499mm)

STANDARD EQUIPMENTTwo standard cutting dies for 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 & 5/8 rod stock.

Ejectomatic Gauge. Special heads –.015" oversized for cuttinghot rolled stock.Custom Dies-hex, square or rectangular stock.Stand - heavy duty with work shelf.

>

OPTIONAL EQUIPMENT

>

D

H

W

DW

>Ejectomatic Gauge - allows the separate operations of gauging, parting and ejecting to be automatically obtained in a single working cycle—especially valuable when cutting lengths under 6 inches.

Model 2 Rod Parter