Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.
-
Upload
adelia-audrey-martin -
Category
Documents
-
view
212 -
download
0
Transcript of Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.
![Page 1: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/1.jpg)
Hand and Power ToolSafety Standards
Training
OSHA - 29CFR1926.300-302Objectives
Start
![Page 2: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/2.jpg)
Objectives
• To understand OSHA Standards designated for the use of hand and power tools in the construction industry
• To recognize safe tool operation and handling• Be able to visually inspect and acknowledge
unsafe tools and environments
![Page 3: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/3.jpg)
Importance of Proper Training
![Page 4: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/4.jpg)
Personal Protective Equipment
• 1926.300(c) • Employees using hand and power tools are exposed
to the hazard of falling, flying, abrasive and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases shall be provided with the particular personal protective equipment necessary to protect them from the hazard. All personal protective equipment shall meet the requirements and be maintained according to Subparts D and E of this part.
![Page 5: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/5.jpg)
The Condition of Tools
• 1926.300(a) • Condition of tools. All hand and power tools
and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition.• No missing pieces and/or guards• Cords are intact and not frayed or cut• No evidence of motor burn
![Page 6: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/6.jpg)
Power Switches
• Most power tools have single action “on/off” switches.– Can be accomplished by similar movement of
finger or fingers to turn on and off.
• Electric power tools can also have constant pressure switches.– Once pressure is released, power is disconnected.
![Page 7: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/7.jpg)
Electric Powered-Operated Tools
All electric tools should have the properly double insulated cord and be grounded.
DO NOT USE THE CORD TO HOIST OR CARRY THE TOOL!!!
![Page 8: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/8.jpg)
Pneumatic Power Tools
• Framing Nailers, finishing nailers, and staplersAll of these have a safety muzzle to prevent the accidental firing of fasteners unless tool is in contact with surface.
DO NOT USE THE AIR HOSE TO CARRY OR HOIST THE TOOL!!!
![Page 9: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/9.jpg)
Powder Actuated Tools
• 1926.302(e)(1) • Only employees who have been trained in the operation of the
particular tool in use shall be allowed to operate a powder-actuated tool.
• Tool should be tested daily.• Any tool not passing will be removed from service
immediately.
• 1926.302(e)(5) • Tools shall not be loaded until just prior to the intended firing
time. Neither loaded nor empty tools are to be pointed at any employees. Hands shall be kept clear of the open barrel end.
![Page 10: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/10.jpg)
Powder Actuated Tools
• Fastener systems which use a gunpowder charge to penetrate solid surfaces such as steel, concrete, or rock.
• Remington, Ramset, and Hilti are common brands.
![Page 11: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/11.jpg)
Non-powered Hand Tools
• Hammers, hand saws, drivers, wrenches, and impact tools– Handles should not be
cracked, chipped, or broken.
– Impact tools (chisels, wedges, and pins) should not have a mushroomed head.
– Wrenches should have their grips in working range and not over extended.
![Page 12: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/12.jpg)
Common sense and the awareness of others will improve safety on the job site.
The Best Bet
Take QuizReview
![Page 13: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/13.jpg)
Employees using hand and power tools are exposed to the hazard of falling, flying, abrasive, and splashing objects, or exposed to harmful dusts, fumes, mists,
vapors, or gases.
True False
![Page 14: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/14.jpg)
CORRECT!!!
Next Question
![Page 15: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/15.jpg)
INCORRECT
Next QuestionTry Again
![Page 16: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/16.jpg)
Power Tools that are in safe working conditions have the following:
No evidence of motor burn
ABCD
No missing pieces and/or guards
Cords are intact and not frayed or cut
All of the above
![Page 17: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/17.jpg)
Not Quite…
Try Again
![Page 18: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/18.jpg)
CORRECT!!!
Next Question
![Page 19: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/19.jpg)
These types of power tools require an air compressor to operate the tools:
Pneumatic PowderActivated
![Page 20: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/20.jpg)
INCORRECT
Finish !!Try Again
![Page 21: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/21.jpg)
CORRECT!!!
Finish !!
![Page 22: Hand and Power Tool Safety Standards Training OSHA - 29CFR1926.300-302 Objectives Start.](https://reader035.fdocuments.in/reader035/viewer/2022070400/56649ea75503460f94ba9b3a/html5/thumbnails/22.jpg)
Thank you for Participating!!
Sources:www.osha.gov Safety Videos:www.youtube.com
ExitTrain Again!