Haitian Jupiter - Amazon S3s3-us-east-2.amazonaws.com/bucket-wp-ahc/wp-content/...2014/04/18 ·...
Transcript of Haitian Jupiter - Amazon S3s3-us-east-2.amazonaws.com/bucket-wp-ahc/wp-content/...2014/04/18 ·...
10000-16000KN
JUⅡ/h High-performance two platen machine
Specifications
Haitian
Jup
iterⅡ
/h Series
Haitian Jupiter Series
NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD,Export Processing Zone, Ningbo 315800 ChinaTel +86-574-86177242Fax [email protected] www.haitian.com
Haitian Partner:
HAITIAN INTERNATIONAL HOLDINGS LIMITEDUnit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong [email protected] www.haitian.com
HT
2014
0418
-IV
③
④
Figure ①Assemble bigger mold because of mold thickness increased compared with the some clamping force machine. It use upside-down ejection device .Ejection stroke controlled by computer can be freewill set.
Figure ②The four clamping cylinder on the fixed platen can quickly build clamping force, and the process is fast. mold stressed uniformity and real-time monitor of clamping force by the pressure sensor ,thereby repeated clamping force can be good reproducibility
Figure ③Synchronous split nuts ensure the nuts close quickly and reliably
Figure④High rigidity slide foot, ensure that movable platen can maintain absolute parallel with fixed platen even use the heaviest mold. movable plate eliminates any tilting torque by the bottom and side of base guide , mold bearing capacity increase greatly.
①
②
Haitian is at once motivated by customer requirements and driven by the very latest market research and development. In order to meet even greater customer demand, we are proud to present the Haitian JupiterⅡ/ h series–a continuation of the well-received JupiterⅡseries. This model combines an even more advanced design concept than its predecessor, with a newer more durable hardware configuration. Every single component has been improved and upgraded - as a result several performance indicators have risen dramatically. As well as increased precision, the mold thickness has also been increased for maximum power saving. The JUⅡ/h series boasts extremely high performance. It is suitable for large molding parts that require a higher mold thickness - such as waste containers, home appliances and automotive parts.
Significant increases in mold thickness
Sketch of platen with similar clamping force (comparison)
Standard machine platen
JUⅡ/h high-performance machine platen
maximum 33% increase in mold thickness when compared to the JUⅡwith
the same clamping force. The new model has a high performance vs. cost
ratio. It is particularly suitable for large molding parts which require a higher
mold thickness.
www.haitian.com2 3
Haitian Jupiter Ⅱ /h SeriesHigh-performance two platen injection molding machine
72XM24 L55
840700
A-A T-slot
28 46
5220
700
560
560
490
490
420
420
350
350
280
16XØ58
Ø200
50
350500
14321920
660
50
10570
12XM24 L50
Ø25
0
SR20
Ø6 56
0 840
650-12001300
5159 35005040
2616
2473
2170
3308
105
200
75125
8XØ39
280
140
140
1670
1182
500 35
0 200
125
75 50
5075125
200
350
500
650
5075125
200350
500650
36
6625
60
1322
15772140
1885
A-A T-slot
700-13001800
5810
2795
2662
4280
2165
5626 3775
50
760
SR20
Ø6
Ø25
0
980
700
14014070
12XM24 L50
980840
700560
420280
140
24XØ58
Ø200
8xØ39
140 28
0 420 560 70
0 840
60XM30 L70
140280
420560
700840
9801120
140 28
042
0 560 70
0 840 98
0
125
200
350
500
650
75125
200350
500650
18772530
2095
1442
36
66
25
60
A-A T-slot
800-15001900
6195 6068 4375
3072
2902
4831
2831
Ø31
5
Ø8
50
850
SR20
1120
840
14070 140
12XM24 L50
24XØ58 Ø315
60XM30 L65
75
www.haitian.com
JU10000Ⅱ/8400h
B11022
48474410750124182
0-120
100001430X1180
12006503502302500
1300/185018
17.575+22+7.5
71.5510.6X3.5X3.4
532001500
JU12000Ⅱ/10600h
B12024
622056601026165171
0-120
150001575X1320
13007003502303100
1800/240030
17.5110+22+7.5
91.3511.9X3.8X4.3
704002000
JU16000Ⅱ/14600h
B14022.3969867891318202148
0-105
160001875X1440
15008003502303400
1900/260045
17.5110+55+7.5
101.3512.7X4.4X4.9
974002600
4 5
Machine dimensions
INJECTION UNITScrew Diameter mmScrew L /D RatioShot Size (Theoretical) cm3
Injection Weight (PS) gInjection Rate g/sPlasticizing Capacity(ps) g/sInjection Pressure MpaScrew Speed rpmCLAMPING UNITClamp Tonnage KNSpace Between Tie Bars mmMax.Mold Height mmMin. Mold Height mmEjector Stroke mmEjector Tonnage KNMax. Daylight mmMould Opening Stroke * mmMax. mold weight** tOTHERSMax. Pump Pressure MpaPump Motor Power KwHeater Power KwMachine Dimension(L×W×H) mMachine Weight tHopper Capacity KgOil Tank Capacity l
Specification
We reserve the right to make changes as a result of further technical advantages.
Moving platen
Platen dimensions
Mounting hole for robot/sprue picker top view from fixed platen
Platen dimensions
www.haitian.com6 7