HairStylingPomadeJZ3-49D
1
The HallStar Company 120 South Riverside Plaza Suite 1620 Chicago, IL 60606-3911 Tel: 877-427-4255 (International: 312-385-4494) Fax: 908-852-1335 E-mail: [email protected] Web Site: www.hallstar.com The information presented herein is believed to be accurate and reliable, but no warranty or guaranty, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence. Hair Styling Pomade Formula JZ3-49D This formulation makes use of acrylate copolymers for their hair fixative and product thickening properties. A nonoily, nongreasy, and slightly waxy emollient feel is achieved with a balanced blend of soy-derived esters, organomodified silicone and the l ight, dry emollient HallStar® Octyl Isononanoate. HallStar® GMS Pure and RTD™ HC-40 help ensure emulsion stability and assist with product removability, while Glycerin helps retain moisture. FORMULA (* = available from HallStar) Item Ingredient INCI Name (Trade Name, Supplier) % Wt 1 Water (aqua) (deionized) 60.02 2 Glycerin (Superol ™ K, Glycerine 99.7% USP/FCC Kosher, P&G Chemicals) 3.00 3 Acrylates/Beheneth-25 Methacrylate Copolymer (Aculyn ™ 28, Dow Chemical) 2.20 4 Acrylates/Hydroxyesters Acrylates Copolymer (Acudyne ™ 180, Dow Chemical) 4.00 5* Ethylhexyl Isononanoate (HallStar ® Octyl Isononanoate, HallStar) 4.00 6* PEG-40 Hydrogenated Castor Oil (RTD ™ HC-40, HallStar) 0.50 7 Hydrogenated Soybean Oil (and) Hydrogenated Soybean Polyglycerides (and) C15-23 Alkane (Dow Corning ® HY-3051 Soy Wax Blend, Dow Corning) 15.00 8 Stearyl Dimethicone (Dow Corning ® 2503 Cosmetic Wax, Dow Corning) 5.00 9* Glyceryl Stearate (HallStar ® GMS Pure, HallStar) 6.00 10 Triethanolamine (Triethanolamine, 99%, Dow Chemical) 0.13 11* Quaternium-15 (CoSept ™ 200, HallStar) 0.15 PREPARATIVE PROCEDURE To the main vessel add 1 and 2. Start mixing and add 3 and then 4. Start heating this water phase to 70°C. To a secondary vessel add 5 and 6. Start mixing, heat to 70°C, and then add 7, 8 and 9, in order, to this oil phase. When oil and water phases are both uniform and at 70°C, add the oil phase to the water phase with continued mixing. After ten minutes start slow cooling. When the batch reaches 55°C, add 10 to adjust to pH 5.0 – 5.8. When the batch is below 50°C add 11. When batch is uniform and at desired filling temperature, stop cooling and mixing and perform final quality assurance checks. PRODUCT CHARACTERISTICS (25C) Appearance: White paste Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 253000, 64000 & 16000 pH: 5.5 HairStylingPomadeJZ3-49D
description
hair care
Transcript of HairStylingPomadeJZ3-49D
The HallStar Company 120 South Riverside Plaza Suite 1620 Chicago, IL 60606-3911 Tel: 877-427-4255 (International: 312-385-4494) Fax: 908-852-1335 E-mail: [email protected] Web Site: www.hallstar.com
The information presented herein is believed to be accurate and reliable, but no warranty or guaranty, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may
infringe any patents or any other proprietary rights now or hereafter in existence.
Hair Styling Pomade Formula JZ3-49D
This formulation makes use of acrylate copolymers for their hair fixative and product thickening properties. A nonoily, nongreasy, and slightly waxy emollient feel is achieved with a balanced blend of soy-derived esters, organomodified silicone and the light, dry emollient HallStar® Octyl Isononanoate. HallStar® GMS Pure and RTD™ HC-40 help ensure emulsion stability and assist with product removability, while Glycerin helps retain moisture. FORMULA (* = available from HallStar) Item Ingredient INCI Name (Trade Name, Supplier) % Wt 1 Water (aqua) (deionized) 60.02 2 Glycerin (Superol ™ K, Glycerine 99.7% USP/FCC Kosher, P&G Chemicals) 3.00 3 Acrylates/Beheneth-25 Methacrylate Copolymer (Aculyn ™ 28, Dow Chemical) 2.20 4 Acrylates/Hydroxyesters Acrylates Copolymer (Acudyne ™ 180, Dow Chemical) 4.00 5* Ethylhexyl Isononanoate (HallStar ® Octyl Isononanoate, HallStar) 4.00 6* PEG-40 Hydrogenated Castor Oil (RTD ™ HC-40, HallStar) 0.50 7 Hydrogenated Soybean Oil (and) Hydrogenated Soybean Polyglycerides (and) C15-23 Alkane (Dow Corning ® HY-3051 Soy Wax Blend, Dow Corning) 15.00 8 Stearyl Dimethicone (Dow Corning ® 2503 Cosmetic Wax, Dow Corning) 5.00 9* Glyceryl Stearate (HallStar ® GMS Pure, HallStar) 6.00 10 Triethanolamine (Triethanolamine, 99%, Dow Chemical) 0.13 11* Quaternium-15 (CoSept ™ 200, HallStar) 0.15 PREPARATIVE PROCEDURE To the main vessel add 1 and 2. Start mixing and add 3 and then 4. Start heating this water phase to 70°C. To a secondary vessel add 5 and 6. Start mixing, heat to 70°C, and then add 7, 8 and 9, in order, to this oil phase. When oil and water phases are both uniform and at 70°C, add the oil phase to the water phase with continued mixing. After ten minutes start slow cooling. When the batch reaches 55°C, add 10 to adjust to pH 5.0 – 5.8. When the batch is below 50°C add 11. When batch is uniform and at desired filling temperature, stop cooling and mixing and perform final quality assurance checks.
PRODUCT CHARACTERISTICS (25C) Appearance: White paste Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 253000, 64000 & 16000 pH: 5.5
HairStylingPomadeJZ3-49D
![N o aMeYa]ha Lhg`Ygfo r W · KXCV yz-=2?oACAB BBBA FGEHDMRLMPLOMNS WTXJXJUWVJRRQZZWKN 49d:[6AK^ Q3h3hrCo4dxJ6>StTzOVZVe][Zo OVbe]c MVe_ge/to1F|oKXCVo P*Eo4dSH4xooG6-@6.xWo N\Fo*aMeYa]ha](https://static.fdocuments.in/doc/165x107/60ced09fa61af3338e598d0a/n-o-ameyaha-lhgygfo-r-w-kxcv-yz-2oacab-bbba-fgehdmrlmplomns-wtxjxjuwvjrrqzzwkn.jpg)
