Haefele TCH Furniture Cabinetry Hardware 2015 11.64-11.64
-
Upload
srinivasagopalan -
Category
Documents
-
view
213 -
download
0
Transcript of Haefele TCH Furniture Cabinetry Hardware 2015 11.64-11.64
-
8/18/2019 Haefele TCH Furniture Cabinetry Hardware 2015 11.64-11.64
1/1
Dimensions in mm
Inches are approximate
www.hafele.com
1
FC 11.64
Connectors and Shelf SupportsStandards and Brackets
256 Series Pilaster Supports for255 Pilaster Standards
Material: Steel
Finish KV Model No. Item No.
zinc 256 ZC 283.19.983
Nails for 255 Pilaster Standards
Material: Steel
Finish KV Model No. Item No.
zinc 255-81N ZC 283.19.999
255 Series Pilaster Standards
• 5/8" wide x 3/16" deep
• 23 gauge high strength steel• Stamped numbers make installation easier• Pre-drilled screw/nail holes• Pre-punched staple holes
Material: Steel; Finish: zinc
Length KV Model No. Item No.
12" 255 ZC 12 283.18.901
18" 255 ZC 18 283.18.902
24" 255 ZC 24 283.18.903
30" 255 ZC 30 283.18.904
36" 255 ZC 36 283.18.905
48" 255 ZC 48 283.18.907
60" 255 ZC 60 283.18.908
72" 255 ZC 72 283.18.909
84" 255 ZC 84 283.18.91095" 255 ZC 96 283.18.911
NoteMounting hardware is not included
*Note
Proper installation and mounting required. Tested to meet or exceed ANSI/BHMA 156.9-2003 performance standards. Weight limits arebased on standards mounted on 16" centers and are intended foruse as general guidelines only. No warranty, expressed or implied,supplied by Häfele.
• KV – Heavy duty• Weight capacity: up to 500 lbs./pair*• Adjustable in 1/2" increments• BHMA Grad 1 compliant• For surface or flush mounted applications