www.haaslti.com973-598-1150

LASER PROCESS HEADS • CRASH PROTECTION • ADJUSTABLE MOUNTS • BEAM EXPANDERS/COLLIMATORS • TRANSLATION MOUNTS• KINEMATIC BEAM BENDERS • BEAM SWITCHING UNIT • KINEMATIC BEAM SPLITTER • BEAM SHUTTER/DIODE POINTER • BEAMCOMBINER/DIODE POINTER • SHUTTER INTERLOCK UNITS • POLARIZER HOUSINGS & WAVEPLATES • DELIVERY TUBES • LOCKING

RINGS • BEAM TUBES • ARTICULATED ARMS • COUPLERS • ACCESSORIES • BEZEL ADAPTERS • CO2 LASER NECESSITIES

25mm Catalog

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

INDEX

Item: Description: Page:

PHA-25 25mm Laser Process Head 1

FCH-5-xx Micromachining Laser Process Head Assembly 2-3

G1-25-xx Micromachining Laser Process Head System 4-5

OLW-25 Optical Laser Wrist & Accessories 6-8

G1-25 Laser Process Head & Accessories 9-13

G6-25 Laser Process Head & Accessories 14-17

MZA Motorized Z-Axis Unit 18

SIU-100 Shutter Interlock Unit 19

LAM-25 Linear Adjustable Mounts 20

LMR-25 Linear Adjustable Rotary Mount 21

RAM-25 Adjustable Rotary Mount 22

SSDP-25 Safety Shutter with Diode Pointer 23

BSK-25 Kinematic Beam Splitter 24

BSU-25 Beam Switching Unit 25

FIB-100 Fiber Optic Illumination System 26-27

FIB-200 Fiber Optic Illumination System 28

TM-25 Translation Mount for Beam Expander/Collimator 29

BEC-25 Industrial Beam Expander/Collimator 30

CPU-25 Circular Polarizer System 31

BQE-25 Beam Quality Enhancement System 32

MVBE Series Motorized Variable Beam Expander 33-34

CAM Series CCD Camera 35

MON Series Video Monitor 36

XHR-100/XHR-200 X-Y Crosshair Generator 37

CAM-1000 CCD Camera System 38

B-25 Beam Delivery Tube 39

BTB-25 Telescopic Bellow Beam Tube 40

BBK-25 Kinematic Beam Bender 41

BTT-25 Telescopic Beam Tubes 42

G1 Series G1 Series Targets 43

OW-G1 G1 "Series" Optic Wrench 43

TGT-BBK-25 Beam Bender Alignment Target 44

TGT-CMNT C-Mount Alignment Target 45

AdditionalComponents

................................................................................. 46

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmLaser Process Heads

LASER PROCESS HEADSpart#- PHA-25

Laser Process Heads provide a protective housing for the focuslens. Each process head is equipped with a nozzle tip standoffadjustment and X-Y focus lens adjustment. Male 1 1/8"-32threads allow for easy mounting. Internal gas jet manifold isincluded for introducing assist gas to the workpiece.

PHA-25-089-LB shown.

PHA-25 Specifications:❍ Standard Focal Lengths: 38mm, 50mm, 64mm, 75mm, 89mm,

95mm, 100mm, 127mm, 191mm (Custom Focal LengthsAvailable, Optic Not Included)

❍ 1 1/8"-32 Mounting Thread Standard, Custom MountingAvailable

❍ Assist Gas Pressure: 7 Bar (100psi) Max.❍ Optics: 1.0" and 1.1" Diameter Standard (Custom Diameters

Available)❍ Use with T-438 Series Tips❍ Available for all Wavelengths❍ Anodized Aluminum & Stainless Steel Construction❍ 24.7mm or 22.9mm Clear Aperture

1

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmLaser Process Heads

MICROMACHINING LASER PROCESS HEADASSEMBLY

The Micromachining Laser Process Head is designed for fine cutting &welding applications. The unit accepts a wide variety of both cutting andwelding optics. The modular design permits custom configurations forspecific applications. Ultra-fine pitch adjustments enable precise, accurateset-ups. Robust, industrial design.

FCH-25-28-38-LA-38-QM shown.

Micromachining AssemblySpecifications:

• 25mm C.A. Fine Cut Head Assembly• ±4mm Focus Adjustment with 0.010mm Resolution• ±1.25mm X-Y Nozzle Tip Adjustment with Fine PitchAdjusters• 38mm, 64mm, 89mm, 95mm, 127mm, 191mm, ZnSeCover• Glass Focus Lens Options• 28mm Dia. (1.1") ZnSe AR Coated• Gas Jet Manifold• 0.5mm & 1.0mm Nozzle Tips• Quick Change Process Head Mount• Monocular/CCD Camera Viewing Head Assembly Options• Anodized Aluminum, Stainless Steel & Brass Construction• Accessory Kit Available• Optic Cleaning Kit Available

2

FOCUSING OPTICS - CUTTING:

210CV-25030-038-ZS-DAR: ZnSe CO2 Focus Lens 38mm (1.5”) F.L x 25mm (1.0”) Diameter210CV-28020-063-ZS-SCO: ZnSe CO2 Focus Lens 63mm (2.5”) F.L x 28mm (1.1”) Diameter210CV-28040-89-ZS-DAR: ZnSe CO2 Focus Lens 89mm (3.5”) F.L x 28mm (1.1”) Diameter090YD-25XXX-050-GL-DCV: 3 Element DL 50mm Focus Lens Assembly090YD-25XXX-060-GL-DCV: 2 Element DL 60mm Focus Lens Assembly090YD-25XXX-080-GL-DCV: 2 Element DL 80mm Focus Lens Assembly090YD-25XXX-100-GL-DCV: 2 Element DL 100mm Focus Lens Assembly090YD-25XXX-150-GL-DCV: 2 Element DL 150mm Focus Lens Assembly

FOCUSING OPTICS - WELDING:

210CV-28030-095-ZS-DAR: ZnSe CO2 Focus Lens 95mm (3.75”) F.L x 28mm (1.1”) Diameter210CV-28040-127-ZS-SCO: ZnSe CO2 Focus Lens 127mm (5.0”) F.L x 28mm (1.1”) Diameter210CV-28030-191-ZS-SCO: ZnSe CO2 Focus Lens 191mm (7.5”) F.L x 28mm (1.1”) Diameter090YA-25XXX-050-GL-DCV: Double Element AA 50mm Focus Lens090YA-25XXX-080-GL-DCV: Double Element AA 80mm Focus Lens090YA-25XXX-100-GL-DCV: Double Element AA 100mm Focus Lens090YA-25XXX-150-GL-DCV: Double Element AA 150mm Focus Lens

COVER GLASS:

13OYG-25032-XXX-FS-DYA: 25mm Cover Glass. Fused Silica.210CC-25010-XXX-ZS-DAR: ZnSe CO2 Cover Glass 25mm (1.0”) Diameter210CC-28010-XXX-ZS-DAR: ZnSe CO2 Cover Glass 28mm (1.1”) Diameter

NOZZLE TIPS - CUTTING:

T-512-020-H01: 0.5mm Nozzle Tip (Cutting)T-512-040-H01: 1.0mm Nozzle Tip (Cutting)

NOZZLE TIPS - WELDING:

T-512-080-H01: 2.0mm Nozzle Tip (Welding)T-512-120-H01: 3.0mm Nozzle Tip (Welding)T-512-160-H01: 4.0mm Nozzle Tip (Welding)

NOZZLE EXTENSIONS:

FCH-25-038-NE: Nozzle Extension for 38mm (1.5”) Focus LensFCH-25-063-NE: Nozzle Extension for 63mm (2.5”) Focus LensFCH-25-089-NE: Nozzle Extension for 89mm (3.5”) Focus LensFCH-25-095-NE: Nozzle Extension for 95mm (3.75”) Focus LensFCH-25-127-NE: Nozzle Extension for 127mm (5.0”) Focus LensFCH-25-191-NE: Nozzle Extension for 191mm (7.5”) Focus Lens

ACCESSORIES:

FCH-25-ACC-CO2: Fine Cut Head Accessory Kit. Includes Optic Wrench, Target, & CO2 Alignment Paper.OCK-50: Optic Cleaning Kit

3

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mm SeriesMicromachining Fiber Laser Process Head System

MICROMACHINING LASER PROCESS HEADSYSTEM:The Micromachining Laser Process Head System is designed for finecutting and welding applications with conventional and fiber lasers. Theunit accepts a wide variety of both cutting and welding optics. Themodular design permits custom configurations for specific applications.Ultra-fine pitch adjustments enable precise accurate set-ups. Robustindustrial design.

Optional Configurations: Specifications:

●22.8mm C.A. Fine Cut Head Assembly

●±4mm Focus Adjustment with 10µm Resolution

●±1.25mm X-Y Nozzle Tip Adjustment with Fine Pitch Adjusters

●Available Linear Adjustable Translation Mount 20mm Travel

●50mm, 60mm, 80mm, 100mm & 150mm focal lengthsavailable.

●Gas Jet Manifold, 200 psi max

●0.5mm & 1.0mm, 2.0mm, 3.0mm, 4.0mm Nozzle Tips

●Quick Change Process Head Mount

●75 mm objective CCD Camera Viewing Head Assembly w/ 1x or2x relay lens

●Anodized Aluminum, Stainless Steel & Brass Construction

●Accessory Kit Available

●Optic Cleaning Kit Available

●Rated up to 500W

4

CLICK IMAGES INSIDE DIAGRAMS TO SEE FULL PRODUCT DETAILS!Micromachining Building Tree

5

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmLaser Process Heads

OPTICAL LASER WRISTPart #: OLW-25Designed for multi-axis gantry laser processing machines, laserrobots and custom equipment. For profile/bevel cutting,welding/cladding and drilling applications. Each system is customassembled as per customer specification. Available in 25mm or50mm clear apertures for either CO2 or Nd:YAG applications.Dual axis wrists feature two floating mirror mounts in a sealedbeam delivery system, collective junction box for electronic andfluid connections and an electrically-interlocked quick-disconnectmagnetic coupler to accept various process head styles. Internalcrash protection breakaway mechanism and liquid cooled opticsavailable on all models. Interfaces with any CNC. Containsproximity sensor position limits on both axis of rotation.All systems include an optic alignment kit. Available with direct,torque tube or slip ring coupling. Use with OW-AF, OLW-SC or OLW-PW laser process head attachment

• A-Axis (Vertical) Rotation: ±350º from "Home"• B-Axis (horizontal) Rotation: ±120º from "Home"• Secondary Gear Ratio: 3:1• Recommended Minimum Inputs: 1Nm Continuous at 200rpm• Accuract: Unidirectional 1.75 arc min• Backlash: Bidirectional 5.02 arc min

Shown with OLW-AF Auto-Focus Profile/BevelCutting Head Attachment

6

Standard Cutting & Drilling Head:

Standard Features:• 90º Mirror Design• Floating Mount• X-Y Focus Lens Adjustment Options• Z Adustment Made by Nozzle Tip Standoff• Cartridge Style Optic Cartridges• Cover Glass Option• Water Cooled Option• Calibrated Nozzle Tip Standoff Assembly with 20mmTravel• Rated up to 31 Bar (450 PSI)• Many Nozzle Tip Options• Available in 25mm or 50mm Clear Apertures forNd:YAG or CO2 Applications

Click Drawing to Enlarge

Auto-Focus Profile / Bevel CuttingHead:

Standard Features:• ±10mm travel with limit Center PositionSensors• 90º Beam Bender Assembly with Floating Mount• X-Y-Z Axis Adjustable Focus Lens Cell withCollar Mounted Process Head• Rated up to 31 Bar (450 PSI)• Translation Speeds of 100mm (4.0”)/Sec• Water Cooling Option• Several Focal Lengths and Nozzle TipDesignsAvailable• Available in 25mm or 50m Clear Apertures forNd:YAG or CO2 Applications

7

Click Drawing to Enlarge

Parabolic Welding / Cladding Head:

Standard Features:• Parabolic Mirror Design• Floating Mount• Cover Glass Option• Several Focal Lengths & Nozzle Tip DesignsAvailable• Manifold Purge Gas Nozzle & Air KnifeOptions• Water Cooled Option• Available in 25mm or 50mm ClearApertures for Nd:YAG or CO2 Applications

Click Drawing to Enlarge

8

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmG1 "Series" Laser Process Head

G1 "Series" 25mm Clear ApertureLaser Process Head & Components

The G1 “Series” laser process head is designed for cuttingand welding applications. Its modular design allowsassembly of custom configurations for specific applications.The G1 “Series” laser process head is available for allwavelengths.

Micromachining Fine Cut HeadSpecifications:

❍ 24.7mm Clear Aperture❍ Available for a Wide Variety of Optics❍ Gas Jet Manifold Pressure Rated to 8.8 Bar (120psi)❍ Anodized Aluminum & Stainless Steel Construction❍ Multiple Optic Options❍ Modular Design❍ All Metric Stainless Steel Hardware

The design shown above is only one of severalavailable configurations.

3.5" F.L. Assembly Shown with the Following Modules:G1-25-C70G1-25-B60G1-25-D35

G1-25-D45-1.1G1-25-E25G1-F-2000

G1-25-G10-275T-625-10-H01

Scroll down for components and accessories for the25mm G1 Series Laser Process Head

LASER PROCESS HEAD SCREW MOUNT:

G1-25-A80E:• Male Thread• Retaining Jam Ring• English or Metric Thread Option• High Grade Anodized Aluminum• 2.125-20 Mounting Thread

Part Number:English Thread: G1-25-A80E • Metric Thread: G1-25-A80MClick here for drawing

9

ISOLATOR ADAPTER / CRASH PROTECTION:

G1-25-B60:• Adapts Mating Bolt Patterns• Electrically Isolates Laser Process Head• Use with Capacitive Auto-Focus Systems• Breaks Away Upon Crash

Click here for drawing

MAGNETIC CRASH DETECTION UNIT:

G1-25-C70:• Provides X,Y Axis Crash Protection• Resets to 25µm (0.001”)• Custom Tooling Pins & Hardened Steel Locating Pads• Eletrical Socket & Jack Provide Interfacing• Sealed Beam Delivery Path• High Grade Anodized Aluminum & Stainless Steel

Click here for drawing

BOTTOM OPTIC CARTRIDGE CONTAINER:

G1-25-D35:• Retainer for 11.4mm (0.45”) Optic Cartridges• 2 (two) Set Screws Secure Optic Cartridge• Bottom Accepts Nozzle Holder Mount• Assist Gas Inlet. 1/8” NPT Fitting• High Grade Anodized Aluminum

Click here for drawing

OPTIC CARTRIDGE CONTAINER:

G1-25-D40:• Retainer for 11.4mm (0.45”) Optic Cartridges• 2 (two) Set Screws Secure Optic Cartridge• May be Stacked Together• High Grade Anodized Aluminum• For use with Buidling Focal Length Heads

Click here for drawing

FOCUS LENS - OPTIC CARTRIDGE:

G1-25-D45-XX:• Mounting Assembly for the Following Focus Lens Diameters:25.4mm (1.0”) - 27.9mm (1.1”)• Reusable Indium “C” - Spring Seal• Spring-Loaded Teflon Assist Gas Seal• Optic Retaining Lock Ring• Removable Cartridge Design• For use with D-35 & D-40 Optic Cartridge Retainers• High Grade Anodized Aluminum

10

G1-25-A75:• 12.7mm (0.5”) Thick• Four Bolt Mounting Pattern• High Grade Anodized Aluminum• Clearance Mounting Holes for M6.

Bolt Pattern:-G1 Series: 69.85mm (2.75”) Bolt SquareClick here for drawing

LASER PROCESS HEAD PLATE MOUNT:

Click Drawing to Enlarge

COVER GLASS - OPTIC CARTRIDGE:

G1-25-D46-XX:• Mounting Assembly for the Following Cover Glass Diameters:25.4mm (1.0”) - 27.9mm (1.1”)• Reusable Indium “C” - Spring Seal• Spring-Loaded Teflon Assist Gas Seal• Teflon Top Seal• Pressure Equalizing Bleed Holes• Optic Retaining Lock Ring• Removable Cartridge Design• For use with D-35 & D-40 Optic Cartridge Retainers• High Grade Anodized Aluminum

OPTIC SPACERS:

G1-25-D41:• Provides 12.7mm (0.5") Spacing to Accommodate Various Focal LengthLens Combinations• May be Stacked Together• High Grade Anodized Aluminum

OPTIC SPACERS:

G1-25-D42:• Provides 25.4mm (1.0") Spacing to Accomodate Various Focal Length LensCombinations• May be Stacked Together• High Grade Anodized Aluminum

OPTIC SPACERS:

G1-25-D43:• Provides 38.0mm (1.5") Spacing to Accomodate Various Focal Length LensCombinations• May be Stacked Together• High Grade Anodized Aluminum

NOZZLE EXTENSION HOLDERS:

G1-25-E25:• Mounting Assembly for Nozzle Extension Tubes• X-Y Axis Adjustable• Accepts Tapered Ring Fitting• Includes G1-25-LC Locking Collet and G1-25-LR Locking Ring for NozzleExtension Tubes• Ring for Nozzle Extension Tubes• Nozzle Locking Collar• Teflon Assist Gas Seal• High Grade Anodized Aluminum and Stainless Steel

NOZZLE EXTENSION HOLDERS:

G1-25-E26:• Mounting Assembly for Nozzle Extension Tubes• Directly Accepts Jam Ring Fitting• Includes F-21 Locking Ring for Nozzle Extension Tubes• Stainless Steel

CLICK HERE FOR TARGETS: 11

NOZZLE EXTENSIONS:

12

13

LOCKING RING:

G1-25-LR:• 7/8"-32 ID Thread• Aluminum

LOCKING COLLET:

G1-25-LC:• 7/8"-32 ID Thread• Stainless Steel

G1 "SERIES" Nozzle Tip Holder

Part#:G1-25-G10-625

Specifications:

• Stainless Steel ConstructionUse with 5/8" - 32 Nozzle Tips• 3/4" - 32 OD Thread

CLICK HERE FOR NOZZLES & NOZZLE TIPS

NOZZLE EXTENSIONLENGTHS:

PART NUMBER:

G1-F-0750G1-F-1000G1-F-1250G1-F-1500G1-F-2000G1-F-2500G1-F-3000G1-F-4000G1-F-5000G1-F-6000G1-F-7000G1-F-8000

OVERALL LENGTH:

19.0mm (.750”)25.4mm (1.0”)31.75mm (1.250”)38.1mm (1.5”)50.8mm (2.0”)63.5mm (2.5”)76.2mm (3.0”)101.6mm (4.0”)127.0mm (5.0”)152.4mm (6.0”)177.8mm (7.0”)203.2mm (8.0”)

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmG6 "Series" Laser Process Head

LASER PROCESS HEADItem#- G6-25

The G6 Series Laser Process Head is designed for High-Speed CuttingApplications. The G6 Series provides front-adjustable X-Y opticcentering capability. It can be configured with multiple focal lengths.

One of many pre-assembled configurations available.

G6-25-L shown above without Crash Detection

G6-25 Specifications:

• X-Y Adjustable Optic Cartridge Design• Crash Detection and Protection Options• Calibrated Nozzle Tip Stand-off Adjustment• Water-Cooled Optics• Gas Jet Manifold• Multiple Optic Options• Available for a Wide Variety of Optics• Modular Design for Custom Configurations• All Metric Stainless Steel Hardware• Many Pre-Assembled Configurations Available

G6-25 Features:

• 24.7mm Clear Aperture• Uses Standard 1.1" Dia. Optics• Gas Jet Pressure Rated to 25 Bar (365PSI)• Anodized Aluminum, Brass & Stainless Steel Construction• Acceleration Stability up to 2G• Robust Design

G6 ASSEMBLY: G6-25-C:

G6-25-C:24.7mm Clear Aperture G6 “Series” Laser Process Head Assembly w/ 3-Axis (XYZ axis) CrashDetection with Micro-Switch Reporting,Magnetic Break-Away with Micro-Switch Reporting, Gas JetManifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 1.1” Dia. X5.0” and 7.5” Focus Lens with 1/4”-80 Adjustment Screws, Water-Cooled, Calibrated High-PressureStainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -3mm +4mm,Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and AnodizedAluminum Construction. All Metric Stainless Steel Hardware.  

14

G6 ASSEMBLY: G6-25-L:G6-25-L:24.7mm Clear Aperture G6 “Series” Laser Process Head Assembly w/ 3-Axis (XYZ axis) CrashDetection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas JetManifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 1.1” Dia. X5.0” and 2.5” Focus Lens with 1/4”-80 Adjustment Screws, Water-Cooled, Calibrated High-PressureStainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -3mm +4mm,Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and AnodizedAluminum Construction. All Metric Stainless Steel Hardware.

G6 ASSEMBLY: G6-25-H:

G6-25-H:24.7mm Clear Aperture G6 “Series” Laser Process Head Assembly w/ 3-Axis (XYZ axis) CrashDetection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas JetManifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 1.1” Dia. X5.0” and 3.5” Focus Lens with 1/4”-80 Adjustment Screws, Water-Cooled, Calibrated High-PressureStainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -3mm +4mm,Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and AnodizedAluminum Construction. All Metric Stainless Steel Hardware.

G6 ASSEMBLY: G6-25-G:

G6-25-G:24.7mm Clear Aperture G6 “Series” Laser Process Head Assembly w/ 3-Axis (XYZ axis) CrashDetection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas JetManifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridge for 1.1” Dia. X 3.5”Focus Lens with 1/4”-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless SteelNozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -3mm +4mm, CapacitiveHeight Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized AluminumConstruction. All Metric Stainless Steel Hardware.

G6 ASSEMBLY: G6-25-J:

G6-25-J:24.7mm Clear Aperture G4 “Series” Laser Process Head Assembly w/ 3-Axis (XYZ axis) CrashDetection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas JetManifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridge for 1.1” Dia. X 5.0”Focus Lens with 1/4”-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless SteelNozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -3mm +4mm, CapacitiveHeight Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized AluminumConstruction. All Metric Stainless Steel Hardware.

CRASH PROTECTION & DETECTION DEVICES:

G6-25-XYZ-S:2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg.of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage.Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. Aprotective Bellows seals the unit while acting as a tether to support the unit from falling upon a crashbreak-away condition.

G6-25-XYZ-L:2-Stage X-Y-Z Crash Detection/Protection Unit (Extended Design). Stage 1 permits Up to +/- 10 deg.of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage.Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. Aprotective Bellows seals the unit while acting as a tether to support the unit from falling upon a crashbreak-away condition.

G6-25-XYZ-BA:Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laserprocess head from a crash condition.

WATER-COOLED SPACERS:

6-25-ST: Spacer block used on top of process head assembly.

G6-25-S-5.0-7.5: Spacer block used with 5.0" and 7.5" f.l. configuration.

G6-25-S-2.5-5.0: Spacer block used with 2.5" and 5.0" f.l. configuration.

G6-25-S-3.5-5.0: Spacer block used with 3.5" and 5.0" f.l. configuration. 15

OPTIC CARTRIDGE RETAINERS:

G6-25-CR: Optic Cartridge Retainer for all G6" Series" Optic Cartridges. 1/4-80 pitch X-Y OpticCartridge Adjustment Screws.

G6-25-CR-TS: Optic Cartridge Retainer for all G6" Series" Optic Cartridges. 1/4-80 pitch X-Y Optic

Cartridge Adjustment Thumb Screws.

OPTIC CARTRIDGES:

G6-25-C-2.5: Optic Cartridge for 1.1" dia. x 2.5" F.L. Focus Lens. Includes reusable Indium "C" Sealand Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealingthe beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. AStainless Steel Thumbscrew locks the cartridge in place.

G6-25-C-3.5: Optic Cartridge for 1.1" dia. x 3.5" F.L. Focus Lens. Includes reusable Indium "C" Sealand Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealingthe beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. AStainless Steel Thumbscrew locks the cartridge in place.

G6-25-C-5.0: Optic Cartridge for 1.1" dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Sealand Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealingthe beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. AStainless Steel Thumbscrew locks the cartridge in place.

G6-25-C-7.5: Optic Cartridge for 1.1" dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Sealand Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealingthe beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. AStainless Steel Thumbscrew locks the cartridge in place.

G6-25-C-10: Optic Cartridge for 1.1" dia. x 10" F.L. Focus Lens. Includes reusable Indium "C" Sealand Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealingthe beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. AStainless Steel Thumbscrew locks the cartridge in place.

NZL-3029-M8-FSX: Dummy Cartridge. Used for multiple focal length configurations to seal unusedoptic slots.

OPTIC CARTRIDGE RETAINERS WITH GAS JET MANIFOLDS:

G6-25-CR-GJ: Optic Cartridge Retainer with Gas Jet Manifold for all G4" Series" Optic Cartridges. GasJet is rated at 25 Bar (365PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic Cartridge AdjustmentScrews.

G6-25-CR-GJ-TS: Optic Cartridge Retainer with Gas Jet Manifold for all G4" Series" Optic Cartridges.Gas Jet is rated at 25 Bar (365PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic CartridgeAdjustment Thumb Screws.

NOZZLE TIP STAND-OFF ADJUSTERS:

TSA-25-7-433: Nozzle Tip Stand-off Adjuster Long. Rated at 25 Bar (365PSI). Laser- MarkedCalibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -3mm and +4mm Travel. RobustStainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths 5.0" and longer)

TSA-25-7-300: Nozzle Tip Stand-off Adjuster Short. Rated at 25 Bar (365PSI). Laser-MarkedCalibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -3mm and +4mm Travel. RobustStainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths shorter than 5.0")

NOZZLE TIP HOLDERS:

NZL-3014-M8-AMX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle TipStand-off Adjuster. Accepts a M8 thread laser nozzle.

16

ACCESSORIES:

TGT-G6: Cartridge Crosshair TargetOW-25: Optic Wrench

17

NOZZLE TIPS:

See “FLAT SHEET CUTTING NOZZLE TIPS” sheet in Accessories & Related Products

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

MOTORIZED Z-AXIS UNITPart Number: MZA

Motorized Z-Axis Units from this series are fabricated from high-grade anodized aluminum and stainless steel to provide high speedlinear positioning of various autofocus and/or laser process headdesigns. A high torque DC servo motor, belt drive, and precision ballscrew provide trouble free operation. The linear stage is guided via(4) miniature recirculating ball trucks. Stage over-travel limits aresensed by non-contact proximity sensors.

All precision components are enclosed within a lightweight, internallysealed enclosure. Optional features include an encoder for use as aCNC controlled Z-Axis. Motorized Z-Axis units are available in 25mm(1.0"), 38mm (1.5") and 50mm (2.0") clear apertures, with linearstrokes of 25mm (1.0"), 50mm (2.0") and 100mm (4.0").

MZA Specifications: ELECTRICAL

❍ Servo Motor:..................High Speed DC❍ Motor Supply Voltage:......36 VDC❍ Connectors:....................Male 15 Pin Canon

....................................Male 9 Pin Sub D❍ Optional Encoder:............500 Line❍ Limit Sensors:................Proximity Switch

MZA Specifications: MECHANICAL❍ Drive:............................Fine Pitch Ball Screw❍ Motion:..........................Recirculating Ball Trucks❍ Velocity:........................100mm (3.94") Per Second❍ Encoder Resolution:.........1.9µm x 10-3mm and .078µm x

10-5

18

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Position Viewing

SHUTTER INTERLOCK UNITPart#: SIU-100

The SIU-100 Shutter Interlock Unit provides the source ofelectrical power to open and close Haas Laser Technologiesshutters. The high peak power circuitry is designed to deliverthe shortest open/close times. The unit provides safetyinterlock circuitry for enclosure doors, panels, beam delivery,etc...

SIU-100-120 Shown to the Right.

SIU-100 Specifications:

❍ Provides the Electronic Circuitry Needed forRotary Solenoid Shutters

❍ Provides High Peak Power at Beginning ofRotary Stroke and then Reduces theWattage to hold the Solenoid in theEnergized Position for 100% Duty CycleOperation

❍ Power-On Switch❍ Removable Keyswitch (Enabled Only) for

Interlock Override❍ Shutter Status Bi-Color LED, Red

(Closed)/Green (Open)❍ 120/240 VAC❍ DB-9 External Interface Connection❍ For use with Haas LTI 24VDC Shutters

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

19

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

LINEAR ADJUSTABLE MOUNTSPart#: LAM-25

Linear Adjustable Mounts are typically attached to a process head for fine adjustment ofthe laser focus spot relative to the workpiece. Each LAM-25 has a clear aperture of25mm. It easily connects in line with other components.

A sealed design prevents contaminant's from entering the beam path. The micrometerallows for precision linear adjustments. The standard 25mm stroke design allows forretraction of lower mount under compressive loads. This mount also incorporates alinear crash protection.

LAM-25-25-VE Shown Ato the right.

LAM-25 Specifications:❍ .001" (.025mm) Adjustment Accuracy❍ Choice of Micrometer Style❍ Adjustable Slide Mount❍ Can be used Horizontally❍ Retraction Under Compressive Loads❍ Z-Axis Crash Protection❍ Sealed Design❍ Anodized Aluminum Construction❍ 25mm Clear Aperture

20

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

LINEAR ADJUSTABLE ROTARYMOUNTSPart #: LMR-25 Series

Linear Adjustable Mounts are typically attached to a processhead for fine adjustment of the laser focus spot relative tothe workpiece.

A sealed deisgn prevents contaminant's from entering thebeam path. The laser marked rotary barrel allows forprecision linear adjustments.

LMR-25-25-VM Shown to the right.

LMR-25 Series Features:❍ .001" (0.25mm) Adjustment Accuracy❍ Can Be Used Horizontally❍ Sealed Design❍ 20mm Clear Aperture

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

21

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

ADJUSTABLE ROTARY MOUNTRAM-25

• Provides Adjustable Rotary Coupling of Beam Components• 0-360º Rotation with 3 Manual Locking Screws• Built-In Calibrated Scale• Double Viton O-Ring Sealed Design• 25mm (1.0”) Clear Aperture• High-Grade Anodized Aluminum & Stainless Steel Construction

RAM-25 shown to the right.

22

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

SAFETY SHUTTER WITH DIODE POINTERPart Number: SSDP-25

The SSDP-25 Safety Shutters are fail-safe shutters designed to handle up to500W. Gold plated, liquid-cooled reflecting shutter blade design.

The blade is designed for fail-safe operation and is closed with the power is off.When the shutter is closed, the laser beam is reflected off of the shutter blade intothe water-cooled beam dump. The replaceable beam dump surface can beordered in several styles. The diode pointer option utilizes a 650nm diode laserwith 1/4"-80 pitch adjustment screws. An independent, isolated mirror injects thediode pointing laser into the beam path when the shutter is closed.

SSDP-25-AU-BC-DDD Shown on the right.

Click Drawing for Enlarged View

SSDP-25 Specifications:❍ 24VDC❍ Standard Gold Plated Blade❍ Optional Shutter Open Detection❍ Optional Thermal Detection❍ Liquid Cooled (3/4gpm@50PSI)❍ Replaceable Beam Dump Surface❍ Optional Alignment Diode❍ DB15 Connection for I/O❍ Anodized Aluminum Construction❍ 25mm Clear Aperture❍ For use with SIU-100 Shutter Interlock Unit

23

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

KINEMATIC BEAM SPLITTERBSK-25

The BSK-25 Series kinematic laser beam splitters provide a 90ºangular beam displacement of reflected beam with minimal lateralbeam displacement of transmitted beams (lateral displacement isdetermined by optic thickness). Several laser beam split options arealso available.

Independent angular orthogonal mirror correction with eighty pitchadjustment screws provides precise, repeatable alignment. Opticremoval & replacement can be accomplished without affectingalignment. Several mirror diameters and thicknesses can beaccommodated.

BSK-25-28040-NN shown to the right.

BSK-25 Specifications:❍ ±2º Independent Orthogonal Mirror Adjustment❍ 80 Pitch Adjustment Screws❍ Accommodates Standard 38mm Diameter Mirror (Other

Diameters Available)❍ Face & Side Mounting Holes❍ Available for All Wavelengths❍ Sealed Design❍ Anodized Aluminum Construction❍ 25mm Clear Aperture

24

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Directing & Positioning Components

BEAM SWITCHING UNITPart #: BSU-25

The Beam Switching Unit contains an internal BBK-25 beam bender mountedon precision linear bearings and can be translated in and out of the beampath. The kinematic laser beam bender provides a 90º beam displacementwith a 25mm clear aperture. Independent orthogonal mirror correction with 80pitch adjustment screws provides precise, repeatable alignment. The BSU-25provides a method to "Time-Share" or redirect the laser beam.

Optic removal and replacement can be accomplished without affectingalignment. Several mirror diameters and thicknesses can be accommodated.

BSU-25-28030-MNNL Shown Above

BSU-25 Series Features:❍ Pneumatic or Manual Configuration❍ ±2º Independent Orthogonal Mirror Adjustment❍ 80 Pitch Adjustment Screws❍ Accommodates 38mm (1.5") Diameter Mirror❍ Available Interlock Output❍ Available for All Wavelengths❍ Anodized Aluminum Construction❍ 25mm Clear Aperture

25

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

Accessories & Related Products

FIBER OPTIC ILLUMINATION SYSTEMPart #: FIB-100Affordable illuminator provides intense cool uniform light under 3-position intensity control. Accepts a variety of other fiber opticaccessories. Porviding 10,000 footcandles of cool illumination at 3inches, the system has a 26” positional gooseneck fiber optic andend lens 0.88” diameter.

A superior alternative to hot halogen microscope illuminators, highintensity lamps and fluorescent rings. Applications includestereomicroscope illumination and machine vision lighting.

FIB-100 Shown

Specifications: Features:

Lamp: 10.8 Volt, 30 Watt, Quartz Hologen, Type EKZ

Lamp Life: 200 Hours Minimum

Color Temp: 3100ºK

Voltage: 115 VAC, 60Hz

Intensity Control: 4-Position Switch

Enclosure: High Impact Plastic

Safety Approvals: UL, CSA

Dimensions: 4.5” x 3” x 7.75”

Weight: 4.5 lbs

Adapters: A-type adapter series

Transformer Dimensions: 4.25” x 2.125” x 2.25”

Cord Length: 72”

CFI-25-V:Coaxial Fiber Illuminator. Injects visable light coaxially tothe laser beam for CCD and Monocucular illumination. Opticsincluded. Mounts between beam splitting housing andCCD/Monocular. Use with FIB-200.

FIB-200Fiber Optic Illumination System. 150W Quartz HalogenPower Supply with intensity control. Includes fiber cable.120VAC.

Click here to view FIB-200 information

Intense Cool Uniform Illumation

Solid State Intensity Control

Simple Lamp Change

Significantly higher output than conventional microscopeilluminators

Long lamp life up to 10,000 hours - Major cost savings tooperate vs. conventional hot illumators

Controllable, flexible illumination puts light exactly whereyou need it.

Small contemporary illuminator package

Minimal light leakage from source

Safe to operate, source is cool to touch!

Accepts wide range of fiber optic configurations, lensesand filters

Meets illumination requirements of Mil Spec 2000

Ideal for stereomicroscope applications, semi conductorand surface mount inspection, machine visionrequirements

Unit can be hard mounted to specialty equipment

26

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

Accessories & Related Products

FIBER OPTIC ILLUMINATION SYSTEMPart #: FIB-200The FIB-200 Fiber Optic Illumination System delivers high intensitycold illumination through a fiber optic cable. Internal filter holder(complete with heat absorbing glass) and manual iris included.115V is UL and CSA approved; 230V is CE approved.

FIB-100 Shown

Specifications:

On/Off Rocker Switch

Cooling Fan

Manual Iris for Constant Color Temperature

0-100% Intensity Variable

Constant Lamp Voltage of ±1.0%

Filber Holder with Heat Absorbing Filter

27

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Enhancement Components

TRANSLATION MOUNT FOR BEAMEXPANDER/COLLIMATORpart#- TM-25

Translation Mounts are designed for the critical alignment of transmissive optics,such as placing a beam collimator within a pre-existing beam path.

When two mounts are used on each end of a component, translational andangular corrections can be made. The internal, sealed stage is adjusted via fourultra fine 1/4"-80 pitch screws within a ±2mm range. A self-aligning joint allowsfor the placement & removal of a componen t without affecting the beam path.

TM-25-S-C shown with BEC-25 Collimator. Shown on the Right.

TM-25 Specifications:❍ Machined From Stainless Steel & Anodized

Aluminum❍ Sealed Design❍ "Quick-Connect" Self-Aligning Joint❍ 1/4"-80 Pitch Adjustment Screws❍ ±2mm Adjustment Range❍ See Drawing for Mounting Information❍ 25mm Clear Aperture

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

29

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Enhancement Components

INDUSTRIAL BEAM EXPANDER/COLLIMATORBEC-25

Beam expanders/collimators can be used to either expand or reducethe laser beam diameter. The BEC-25 has a sealed design with easilyremovable optics. The adjustment ring allows for precise control ofbeam divergence, without rotating the optic or changing the overalllength of the expander.

BEC-25 Specifications:❍ Machined from Aluminum, Brass & Stainless Steel❍ Fixed Overall Length for Easy Mounting❍ Sealed Design❍ Galilean Telescope Design Ensures Minimum Aberration❍ Easily Removable Optics for Cleaning & Expansion Changes❍ Use with TM-25 Translation Mount❍ Available for All Wavelengths❍ Optics are AR Coated for Specific Wavelength❍ Custom Expansion Ratios❍ Max. Output Aperture (Positive Expander) - 23mm BEC-25-2.0-10.6 Shown.

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

30

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Enhancement Components

CIRCULAR POLARIZER SYSTEMCPU-25

The Beam Circular Polarizer System is designed to convertthe laser beam from a linearly polarized beam to a circularlypolarized beam.

CPU-25 Shown to the right.

CPU-25 Specifications:❍ Designed for CO2 Lasers (10.6µm)❍ All Mirrors Included❍ Offset Mirrors Can Be Rotated to "Fresh" Surface

for Small Beam Sizes❍ Liquid Cooled Mirrors - 1/8 BSPT Fittings❍ Anodized Aluminum Construction❍ 25mm Clear Aperture❍ Mounts for any Input/Output Configuration

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

31

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Enhancement Components

BEAM QUALITY ENHANCEMENT SYSTEMBQE-25

The Beam Quality Enhancement System is designed to preventback reflections from the alser process from re-entering the lasercavity. The system preserves the laser's intra-cavity conditions,mode quality, and power stability. In addition, the laser beam isconverted from a linearly polarized beam to a circularly polarizedbeam.

BQE-25 shown on the right.

BQE-25 Specifications:

❍ Designed for CO2 Lasers (10.6µm)❍ All Mirrors Included❍ Offset Mirrors can be Rotated to "Fresh"

Surface for Small Beam Sizes❍ Liquid Cooled Mirrors - 1/8 BSPT

Fittings❍ Anodized Aluminum Construction❍ 25mm Clear Aperture❍ Mounts for any Input/Output

Configuration

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

32

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Enhancement Components

MOTORIZED VARIABLE BEAM EXPANDERPart#: MVBE Series

Motorized Variable Beam expanders collimators can be used toeither expand or reduce the laser beam diameter. The MVBEhas a variable 2X-8X or 1X-4X expansion range providingprecise beam expansion control via RS232 interface. Aproprietary 5 lens-element design with 3 lens groups is used toreduce the internal focusing effects for high power applications.

• Diffraction-limited design• 5 Element design reduces internal focus• Continous zoom and focus control• Designed to minimize beam wander• RS232 Serial Interface• One Motor Control Unit• Default Expansion settings pre-programmed• User-controlled focus adjustment• Users can define custom expansion settings• Compact 50mm OD Design• Windows compatable• Developed in Labview TM• GUI (.DLL) can be addressed from C++ or other languages MVBE Shown Above.

Design:

Other beam expanders contain 4 lenses consisting of 3 lensgroups, the first being positive followed by a negative groupthen a positive group for collimation. This design causes a focusinto the second lens group, consequently increasing thepossibility of damage to the system.

• Diffraction-limited design• 5 element design reduces internal focus• Mechanical design minimizes beam wander• Continuous zoom and focus adjustments

At Haas Laser Technologies, Inc., we employ a proprietary 5lens-element design with 3 lens groups to reduce the internalfocus. Also, we use fused silica lenses on the two input groups.As a result, our zoom beam expanders tolerate a very highdamage threshold.

Features:

• Default expansion settings pre-programmed• Users can define custom expansion settings• User-controlled focus adjustment• Windows compatible• RS232 Serial Interface• Compact 2” outside diameter• GUI (.DLL) can be addressed from C++ or other languages.

33

Part Number Clear Aperture Damage Expansion Wavelength

MVBE-30-2-8X-248-425

MVBE-30-1-4X-249-425 30mmStandard

High

2X-8X

1X-4X

248nm-425nm

248nm-425nm

MVBE-30-2-8X-450-765

MVBE-30-1-4X-450-765 30mmStandard

High

2X-8X

1X-4X

450nm-675nm

450nm-675nm

MVBE-30-2-8X-600-900

MVBE-30-1-4X-600-900 30mmStandard

High

2X-8X

1X-4X

600nm-900nm

600nm-900nm

MVBE-30-2-8X-600-901

MVBE-30-1-4X-600-901 30mmStandard

High

2X-8X

1X-4X

800nm-1200nm

800nm-1200nm

MVBE-30-2-8X-600-902

MVBE-30-1-4X-600-902 30mmStandard

High

2X-8X

1X-4X

1100nm-1600nm

1100nm-1600nm

MVBE-30-2-10X-9.3

MVBE-30-1-5X-9.3 30mmStandard

High

2X-10X

1X-5X

9300nm

9300nm

MVBE-30-2-10X-10.6

MVBE-30-1-5X-10.6 30mmStandard

High

2X-10X

1X-5X

10600nm

10600nm

34

Damage Threshold:

Standard248nm - 1600nm: 100MW/cm2 for 10ns pulse width, 1 cm beamdia @ 10Hz9800nm - 10600nm: 20KW/cm2 pulsed, 1KW/cm2 CW

High Power248nm - 1600nm: 500MW/cm29800nm - 10600nm: 100MW/cm2

Specifications:

Expansion Range: 2X-8X Continuous or 1X-4X ContinuousInput Aperture: 10mm MaxOutput Aperture: 30mmBeam Wander: 0.15mradWavefront Distortion: <1/4 Wave @633nmWavelength: see belowField of View: +/- 0.5 deg.Transmission: 95% to 97%Expansion Change Time: < 10 sec.Temperature range: -10 to +50 C

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Positioning Viewing:

CCD Camera:Part # CAM

CAM Series Features:❍ Provides coaxial viewing of laser

position through the focus lens whenused withBSK-25

❍ Ultra low-light viewing capability❍ High/Low sensitivity switch❍ 12VDC from supplied 24/12, 120/12

or 220/12 Converter❍ Compact design

Black & White Camera:Part # CAM-B Shown

Color Camera:Part # CAM-C Shown

CAM B/WSpecifications:

❍ Output Signal: NTSC Compatible❍ Video Output: BNL Female❍ Illumination: 0.0003 Lux❍ Power Source: 12VDC❍ Dimensions:

Length: 58mmWidth: 34mmHeight: 34mmWeight: 90gms

❍ Power Supply Included

CAM COLOR Specifications:❍ Output Signal: NTSC Compatible❍ Video Output: BNC Female❍ Illumination: 0.1 Lux❍ Power Source: 12VDC

Dimensions:Length: 64.5mmWidth: 42mmHeight: 42mmWeight: 160gms

❍ Power Supply Included

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

35

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Position Viewing

VIDEO MONITORPart #: MON Series

The "MON" Series video monitor provides coaxial laser position viewing withCCD camera.

MON-9-C-120 Shown Above

MON Series Specifications:❍ Input Signal: BNC Male❍ Power Source: 120 VAC 50-60Hz or 220 VAC, 50-60Hz❍ Dimensions:

Length: 254mm (10.0")Width: 216mm (8.5")Height: 254mm (10.0")Weight: 4.5Kg (10Lbs)

MON Series Features:❍ Provides coaxial laser position viewing with CCD

Camera❍ 228 (9.0") diagonal B&W screen (other types

available upon request)❍ High resolution for laser processing❍ Available for 120 VAC or 220 VAC power sources

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

36

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Position Viewing

X-Y CROSSHAIR GENERATORPart #: XHR-100 / XHR-200

The X-Y Crosshair Generator creates X & Y axis crosshairson any color or black and white TV and/or video system.

XHR-100 Shown Above

XHR Series Specifications:

❍ Input: Composite Video 0.7-1.4V p-p/75 ohms❍ Output: Composite Video 1.4V p-p/75 ohms❍ Bandwidth: Greater than 12MHz❍ Controls: Power, On-Off, White-Off-Black, Vertical

Positioning, Horizontal Positioning, Intensity❍ Input/Output: BNC Male❍ Line Movement: 100% of screen in each axis❍ Power Source: 120 VAC, 60Hz or 220 VAC, 50Hz❍ Power Consumption: 10 Watts❍ Dimensions:

Length: 266mm (10.5")Width: 216mm (8.5")Height: 57mm (2.25")Weight: 1.8Kg (4Lbs)

XHR Series Features:

❍ Creates X & Y axis crosshairs on any color or black andwhite tv/video system

❍ Fully moveable vertical & horizontal crosshairs❍ Black or white crosshair feature❍ All front panel controls❍ Panel-mounted fuse and "U"-Ground convenience plug on

back panel

Part #: XHR-100 Power Source: 120 VAC, 60HzPart #: XHR-200 Power Source: 220 VAC, 50Hz

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

37

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Positioning Viewing

CCD Camera System:Part#: CAM-1000

CAM-1000 Series Features:

The CAM-1000 CCD Camera System permits coaxial viewing of thefocal position through the high-power laser optics for set-up andprocess monitoring. The CAM-1000 system can be used inconjunction with a beam splitter module (BSK) for real-time processmonitoring. It can also be used in high-power applications with aBeam Switching Unit. (BSU)

The CAM-1000 System is a modular design which can be configuredin many ways. Typical systems include zoom optics, wavelengthcompensator optics, X-Y and Tip/Tilt adjustments and KG3 filter.Unit features a standard C-Mount for camera. Magnifications canrange from 2X-160X. Magnification is dependant on wavelength,focus lens focal length and distance placed from focus lens.

Use with Monitor (MON), Cross Hair Generator (XHR) and CCDCamera (CAM).

Please contact Haas Laser Technologies, Inc. for fitment to yourspecific application.

Monitor (MON)Click here

Cross Hair Generator (XHR)Click here

CCD Camera (CAM)Click Here

38

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmAdapters, Clamps, Mounts, Beam Tubes, Etc...

BEAM DELIVERY TUBEPart#: B-25

Specifications:❍ Provides Sealed Containment of Laser Beam Path❍ Available in up to 180cm (6ft.) Lengths❍ 25mm (1.0") Clear Aperture❍ High-Grade Anodized Aluminum Construction❍ Clear Aperture: 25mm (1.0")❍ O.D.: 31.75mm (1.250")

Use with BC-25 Beam Tube Coupler

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

39

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmAdapters, Clamps, Mounts, Beam Tubes, Etc...

TELESCOPIC BELLOW BEAMTUBESpart#- BTB-25

Telescopic Bellow Beam Tubes are typically usedwhen a part of the delivery system is attached to atranslating axis. The BTB-25 Bellow tubes to ensureprotection from misaligned beams. Mounting patternis (4) M4 on flange separated by 65.1mm.

BTB-25 Specifications:❍ High-Grade Anodized Aluminum❍ Internal Non-Metallic Seals (Optional)❍ Neoprene or Gortex® Bellows (Optional)❍ Modular Design❍ See Drawing for Mounting Configuration❍ Extended Length=300mm

Compressed Length=38mm❍ Modular Design. Combine to obtain required

length BTB-25-F38-300-38 Shown Above

BTB-25-F Flange Shown Above

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

41

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmBeam Position Viewing

KINEMATIC BEAM BENDERBBK-25 Series

The BBK-25 series kinematic laser beam benders provide a 90º beamdisplacement with a 25mm clear aperture.

Independent Orthogonal mirror correction with 80 pitch adjustment screwsprovides precise, repeatable alignment. Optic removal and replacement can beaccomplished without affecting alignment. Several thicknesses can beaccomodated. All captive hardware.

Unobstructed Optic for Easy Cleaning!

BBK-25-38050-WN Shown Above.

BBK-25 Specifications:❍ ±2º Independent Orthogonal Mirror

Adjustment❍ 80 Pitch Adjustment Screws❍ Accommodates 38mm (1.5") Diameter Mirror ❍ Face & Side Mounting Holes❍ Available for All Wavelengths❍ Sealed Design❍ Anodized Aluminum Construction❍ 25mm Clear Aperture❍ Water Cooling & Interlock Options❍ Internally Cooled Copper Mirror Option

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 200941

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmAdapters, Clamps, Mounts, Beam Tubes, Etc...

TELESCOPIC BEAM TUBESpart#- BTT-25

Telescopic Beam Tubes are typically used when a partof the delivery system is attached to a translating axis.The BTT-25 has an internal metallic telescoping sealand an external bellows seal. The BTS-25 hasmale/female telescoping aluminum tubes with a shaftseal. Note: The BTT is vertical only, BTS is vertical andhorizontal.

BTT-25-CM-CM-100-200-V Shown to the right.

BTT-25 Specifications:❍ High-Grade Anodized Aluminum❍ Internal Non-Metallic Seals (Optional)❍ Neoprene or Gortex® Bellows (Optional)❍ Standard 1"-32 Mounting Thread (C-Mount)❍ 25mm Clear Aperture❍ Custom Lengths & Strokes

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

42

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmAdapters, Clamps, Mounts, Beam Tubes, Etc...

TARGETS & OPTIC WRENCHES

Alignment targets aid in the centering of the laser beam relative to the mechanical center of beam deliverycomponents. The 25mm clear aperture series has two standard targets designed to satisfy most alignment needs.

Both targets have an anodized aluminum construction with 0.9mm diameter brass crosshairs.

G1 " SERIES" TARGET

TGT-G1:• Target for G1 "Series" Laser Process Head

25mm G1 "SERIES" TARGET:

TGT-25-C:• Target for 25mm C.A. Beam Delivery Systems

25mm G1 "SERIES" TARGET:

TGT-25:• Target for 25mm C.A. Beam Delivery Systems

G1 "SERIES" OPTIC WRENCH:

OW-G1:• Optic Wrench for G1 "Series" Laser Heads

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery lBeam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

43

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

25mmAdapters, Clamps, Mounts, Beam Tubes, Etc...

TARGETSAlignment targets aid in the centering of the laser beam relative to the mechanical center ofbeam delivery components. The clear aperture series has two standard targets designed to

satisfy most alignment needs. Both targets have an anodized aluminum construction with 0.9mmdiameter brass crosshairs.

BEAM BENDER ALIGNMENT TARGETTGT-BBK-25

After removing the kinematic plate of the beam bender, the beam bender alignment target is installedwith cross-hairs in the same plane as the optic. Alignment between beam benders can be made without

removing beam tubes.

Part #: TGT-BBK-25

TGT-BBK-25 Shown with BBK-25

44

Part #: OW-110-092

C-MOUNTALIGNMENT TARGET

TGT-CMNT

1"-32 male threads allow the C-Mount alignment target to connect easily with the output side of the LAM-19, PHA-19 and BEC-19, as well as other 19mm clear aperture components.

Part #: TGT-CMNT

45

OPTIC WRENCHOW-110-092

The optic wrench has an anodized aluminum construction and is specifically designed for tightening andloosening the focus lens of the PHA-19.

HOW TO CONTACT US:

Phone: 973.598.1150Fax: 973.598.1151

Email: sales@haaslti.com

Search:   sitemap 

Additional Components:

Haas Laser Technologies, Inc. offers one of the largest selections of laser beam delivery componentsavailable worldwide. Although we try to show you the most common components, we have an extensiveinventory of additional and custom designed components now shown. If you do not find exactly what youneed, please give us a call. Chances are that we have already built a component that will meet yourspecific requirement.

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head

All rights reserved by Haas Laser Technologies, Inc. Copyright 2009

46