H834P074
Transcript of H834P074
Techno Linear Motion Catalog 74
MA
CH
INE
S&
SLID
ES
2
Standard-Duty Slide
FEATURES
����� 30 x 175 mm base plate
����� Home reference switch and far end limit switch with±0.01 mm repeatability
����� Aluminum dust cover with plastic lip seals toprotect against contaminants
����� Features 2 patented double linear rails and4 patented double bearing blocks
����� All models with stepper motor option feature 125oz • in stepper motor, model HL2600M210001
����� All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver optical rotaryencoder, 1000 line
����� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch for play-free, precise motion
����� Work surface is flat milled aluminum 220 x 175 x 8mm with 8 drilled and tapped M6 mounting holes
����� Optional ball screw is 16 mm diameter, 10 mm or 20mm pitch
CATALOG NUMBERHL31000 0M601
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
Screw TypeB Ball ScrewX No Screw
Screw Pitch05 5 mm10 10 mm20 20 mm
EXAMPLE: To order a Standard-Duty Slide with Stepper Motor (S),5 mm Pitch Ball Screw (B) & 175 mm Travel (0400), theCatalog Number is HL31SBM601040005.
Length, L1mm (in)
Travelmm (in)
Weightkg (lb)
7.3 (16) 9.5 (21)11.8 (26)13.6 (30)19.0 (42)20.0 (44)22.2 (49)25.0 (55)27.2 (60)30.0 (66)
0075 0(2.9)0175 0(6.8)0275 (10.8)0375 (14.7)0625 (24.6)0775 (30.4)0875 (34.4)1025 (40.3)1130 (44.5)1275 (50.1)
300 (11.8) 400 (15.7) 500 (19.6) 600 (23.6) 850 (33.4)1000 (39.3)1100 (43.3)1250 (49.2)1350 (53.1)1500 (59.0)
0300040005000600085010001100125013501500
Code
STANDARD-DUTY SLIDE SELECTION
XYZ configurations possible withmounting plates on pages 126 and 127.
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 75
MA
CH
INE
S&
SLID
ES
2
Standard-Duty Slide
NOTES ON SPECIFICATIONS:Stepper motor is model HL2600M210001 as described on page 152, operating in half step mode,with 4.5A / phase,40V chopper driver. Servo motor is model HZ2600M1050XY3 as described onpage 164, operating with 6A / 80V chopper amplifier and 1000 line encoder operating in quadrature.These figures will, of course, vary with different loads, amplifiers and acceleration profiles providedby the controller.
Repeatability
Accuracy
Vertical Static Load Capacity
± 0.01 mm (± .0004 in)
± 0.1 mm / 300 mm (± .004 in / 12 in)
113 kg (250 lb)
Ball Screw Pitchmm
Thrust Force atLow Speeds, kg (lb)
No Load Speedmm/sec (in/sec)
Resolutionmm (in)Motor Drive
5
10
20
5
10
20
91 (200)
45 (100)
23 (50)
113 (250)
57 (125)
28 (63)
127 (5)
254 (10)
510 (20)
152 (6)
305 (12)
610 (24)
0.0125 (.0005)
0.025 (.001)
0.05 (.002)
0.0025 (.0001)
0.005 (.0002)
0.01 (.0004)
StepperMotor
ServoMotor
SPECIFICATIONS
43
L1220
8
85
8
6.35
20.5
200
185
92.5
175 70
50
166143
STEPPER MOTORHOUSING
1829.5
52.5
6887.5
4, M6 TAPPEDHOLES 8 mm DP
134.5115
92.550.5
17.567.5
117.5167.5
8 M6 TAPPED HOLES 8 mm DP 50 mm apart4 REAMED HOLES Ø6 mm on 100 mm SQ.
Product Finder Home Page