H2S ANALYZER HH22SSAANNAALLYYZZEERRLong Tag No. 27-AIT-003 Sub System No. Data Sheet / Rev. Tag. No. 27-AIT-003 Location ON SKID SHELTER Site MOPU - Maleo Date 27/10/2010 Tag Description H2S Analyzer Sub System Description Drawing Reference/Rev. Volt 110 50/60 Hz Type Core/Pairs Size From To N/A INIT DATE BASIC DATA Installation Ref. Drawing No./Rev. System ANALYZER Sheet No. Equipment No. AIT-003 Location Analyzer Shelter Manufacturer GAS Duty Type of enclosure ITEMS TO BE CHECKED 1 Check equipment Nameplate and Tag Number details are correct in accordance with the data sheet Pass 2 Hazardous area classification correct Pass 3 Holding down arrangement Pass 4 Check for mechanical damage Pass 5 Earthing correct and tight Pass 6 Termination correct and tight Pass 7 All internal cabling and wiring correct, including segregation, IS to NON IS circuits etc. Pass 8 Properly supported and accessible for maintenance Pass 9 Spare entries plugged correct plug for area classification Pass 10 Check internals for cleanliness Pass 11 Incoming cables are Glanded and Terminated correctly Pass 12 Terminal are correct type (Exe, Exi, Ceramic etc) Pass 13 All cover bolts and gasket undamaged Pass 14 All spare entries blanked off with correctly certified plugs. Pass 15 Verify ingress protection is suitable for area (IP rating) Pass 16 Hazardous Area check-sheets completed by Competent Person. Pass Remarks NO Desire Value Analyzer Value Error Criteria 1 40 ppm 39.9 ppm 0.25% (