SpecSure®

All of the Saint-Gobain Gyproc India Limited proprietarysystems in this literature are covered by the SpecSure®Performance Warranty.

• Our guarantee is that they will perform to theparameters published in our current literature for theperiod of time that the systems are used for theiroriginally designed purpose

• Our guarantee is of absolute peace of mind whenspecifying Saint-Gobain Gyproc India Limited systems

Manufacturing of usesGypsteel ULTRATM

less metal, which reduces the impact on

the environment. It also results in products

those are lighter so you can ship more on

each load, lowering transport related

pollution too.

• Our engineers develop highly efficient

product designs that perform flawlessly,

resulting in very economical metal usage

• State-of-the-art manufacturing plant

ensures high accuracy and low waste

Thus helps in achievingGypsteel ULTRATM

any project to become green.

What Is Gypsteel ULTRATM

Gypsteel ULTRA - A cold rolled pre-forming process that locally work hardensTM

the base material

Gypsteel ULTRATM is manufactured under license by Saint-Gobain Gyproc India Ltd. using the Ultrasteel

process and is protected by UK and International Patents granted and pending together with design

registration. Ultrasteel is a trademark of Hadley Industries Overseas Holdings Limited.

Our raw material passes through a series of checks& stringent controls to ensure high quality.

ApplicationFixed to floor and ceiling for securingGypsteel ULTRATM wall studs

Dimensions in mm:50 x 32 x 32 x 3660 72 x 32 x 32 x 366094 x 32 x 32 x 3660 148 x 32 x 32 x 3660

ApplicationUsed as the vertical support in wall framing

Dimensions in mm:48 x 34 x 36 x 3050/3660 70 x 34 x 36 x 3050/366092 x 34 x 36 x 3050/3660 146 x 34 x 36 x 3050/3660

ApplicationUsed as the vertical support in wall framing. This is aspecialist stud which will give high acoustic performance

Dimensions in mm:70 x 41 x 44 x 3050/3660 146 x 41 x 44 x 3050/366092 x 41 x 44 x 3050/3660

ApplicationUsed for horizontal support

Dimensions in mm:48 x 40 x 0.5 x 390/492/695 70 x 40 x 0.5 x 390/492/69592 x 40 x 0.5 x 390/492/695 Length: 695/492/390

ApplicationFor shaftwall

Dimensions in mm:48 x 38 x 3050/3660 70 x 38 x 3050/366092 x 38 x 3050/3660 146 x 38 x 3050/3660

Metal Thickness: 0.5mm (48mm stud),0.7mm (70/92/146 mm studs),0.9mm (92/146 mm studs)

Retaining channel and starter channel of suitable sizesare also available for fixing of I Stud

ApplicationThe main supporting section to fix plasterboard

80 x 26 x 51 x 3660Dimensions in mm:

ApplicationFix around walls/partitions

20 x 28 x 30 x 3660Dimensions in mm:

ApplicationPrimary section to support the ceiling section

15 x 45 x 15 x 3660Dimensions in mm:

ApplicationTo provide suspensions from the structural soffit

25 x 10 x 3660Dimensions in mm:

ApplicationUsed to connect ceiling section or U section tointermediate channel or tube section respectively

2.64 ØDimensions in mm:

ApplicationExpandable fastener to hold the ceiling

38 x 12 ØDimensions in mm:

ApplicationTo hold the ceiling angle / MS Flat / Level clipsuspensions of framework from the structural soffit

27 x 37 x 25 x 1.6Dimensions in mm:

ApplicationCorrosion resistant self-tapping zinc plated steel screwswith countersunk cross-heads, supplied with screwdriver bits. To fix plasterboard to metal framework

3.5 x 25 | 3.5 x 35 | 3.5 x 50Dimensions in mm:

ApplicationFor stud to channel screwing, use metalscrews with wafer thin head.

4.2 x 13Dimensions in mm:

ApplicationPerforated galvanized metal bead for reinforcing external90° angles where maximum protection is required

25 x 25 x 2440 | 25 x 25 x 3660Dimensions in mm:

ApplicationGalvanized metal bead, having an asymmetric profilewith one perforated leg to accommodate jointingmaterial. It is used to protect the exposed andunsupported edges of plasterboard. Also used to formperimeter detail to cover the edges of plasterboard

Dimensions in mm:25 X 12 X 9.5 X 2440 25 X 12 X 9.5 X 366025 X 12 X 12.5 X 2440 25 X 12 X 12.5 X 366025 X 12 X 15 X 2440 25 X 12 X 15 X 3660

ApplicationShadowline stopping bead is a semi perforated galvanizedsection used for minimizing the appearance of non-alignedon installation and finishing. They are suitable for ceilingperimeters, door jambs, windows, etc.

0.4 X 9 X 10 X 28Dimensions in mm:walls and ceilings by giving a clean, straight, shadow edge

Longer Life, High Performance,Higher Safety & User Friendly Systems withGypsteel ULTRA

TM

Center of Gypsteel ULTRATM

can be easily identified for

conveniently screwing the

plasterboards

Gypsteel ULTRATM

High stiffness makes

moreGypsteel ULTRATM

secure and capable of taking

the plasterboard load

Gypsteel ULTRATM

Advantages