GVA-HL-DL 02.04.13

HighLighter™ HL-DL

Long Run Modular LED Delineation System

Product Guide

Highlighter™ HL-DL Long Run Modular LED Delineation System

Highlighter™HL-DL is a long run modular LED lighting system designed for architectural delineation where long runs are necessary and it is undesirable, impractical or impossible to have numerous power feeds or power supplies.

Highlighter™HL-DL uses GVA Lighting’s proprietary power and control technology, INFINITY™, which allows it be installed in exceptionally long runs. Up to 672 modules can be connected to one feed for a single run of up to 200m.

The Highlighter™HL-DL system consists of LED modules, an aluminum mounting profile, a diffuser tube and a Power-Data Box. The LED module is a fully sealed, IP66, 300mm (1ft) linear luminaire with 18 LEDs, consuming a maximum of 5W each. Each module is connected end-to-end and snapped into the aluminum mounting profile, which is securely fastened to the mounting surface. The impact resistant, UV stable acrylic diffuser tube installs over the modules to present an evenly illuminated, deeply

2saturated line of light with a surface brightness up to 4000cd/m . The Power-Data Box supplies power and control data to the modules.

All components can be field installed with simple tools allowing for easy customization at the job site.

PG-HL-DL 02.04.131

Typical HL-DL Diagram

System components: Mounting Profile, Highlighter™Modules, Diffuser, Diffuser Shim and Power-Data Boxes are combined to create the complete installation. Mounting profiles are securely fastened to a building or other structure, modules are snapped into the profile and diffusers are snapped onto the profile to create the illuminated delineation effect. Diffuser shims are used to secure the diffuser to the mounting profile in case of strong wind.

Standard length for Mounting Profiles and Diffusers is 2400mm, while shorter lengths are used at the ends of runs to achieve specific lengths down to 300mm increments. 4800mm is the maximum possible length for single pieces.

Highlighter™ Modules can be configured as 1200mm long strings of 4 permanently connected modules or as single 300mm long units. Pre-assembled strings increase system efficiency by reducing losses at connections and cut down installation time by reducing the number of connections made on-site. While single modules are used at the ends of runs to achieve specific lengths down to 300mm increments.

DELINEATION RUN 1

DELINEATION RUN 2

POWER-DATA BOX(ES)

LINE VOLTAGE INPUT84~264VAC

CONTROL INPUT

POWER-DATA LEADER CABLE(Maximum 30m/100ft to first module)

DELINEATION DIFFUSER

HIGHLIGHTER™ MODULES

MOUNTING PROFILE

PG-HL-DL 02.04.132


Highlighter™ Modules

Maximum Run Lengths (per 1 PDB)

Power-Data Box Specification Logic

FAMILY

PDB-2000PDB-3800

CONTROL**

NC - No Control1DMX - DMX Control, 1 Universe2DMX - DMX Control, 2 UniversesDALI - DALI ControlARTNET - ARTNET ControlTRIAC - TRIAC Control0-10V - 0-10V Dimming

INPUT VOLTAGE

110-240VAC - Single Phase System208VAC - Three Phase System

Sample Logic : PDB-2000-NC-208VAC

** Due to de-rating, minimum input voltage for 2DMX control is 200VAC Refer to SP-PDB-XXXX for full Power-Data Box specifications

PDB-2000 (90~199VAC)

PDB-2000 (200~264VAC)

PDB-3800 (180~264VAC)

200 HIGHLIGHTER™ Modules



HL-Module Ordering Logic

FAMILY

HL

LED COLOR

RGB2700K3000K3500K4000K5000K6500KRD - RedGR - GreenBL - Blue

CRI* (Optional)

H1 - High CRI, Minimum 90

STRING LENGTH

300 - 1 Module1200 - 4 Modules

Sample Logic : HL-1200-3000K

* CRI for standard LEDs is Minimum 80 High CRI, Minimum 90, available with 3000K and 4000K LEDs only, extra cost applies, 4000K by special order (longer lead time)

3mm0.12in

28.50mm1.12in

18 x 16.67mm

0.66in

16.67mm0.66in

HL-300, Single Module

297mm11.69in

31.25mm1.23in

1197mm47.13in

1 2 3 4

HL-1200, String of 4 Modules


PG-HL-DL 02.04.133

Mounting Profile Ordering Logic*

Diffuser Ordering Logic*

Diffuser Shim Ordering Information*

FAMILY

PROFILE, HL, FABRICATED

FAMILY

DIFFUSER, HL-DL, ROUND, 50MM, IMPACT RES PMMA, SATINE WHITE

DIFFUSER, HL-DL, FLAT, 46MM, IMPACT RES PMMA, SATINE WHITE

Mandatory for outdoor applications to secure diffuser

FAMILY

DIFFUSER SHIM

COLOR

CM - Clear Matte Anodized, A41CUSTOM - Custom Color

PART NUMBER

120629120630120631120632120633120634120635120636

PART NUMBER

120459120460120461120462120463120464120465120466120664120665120666120667120668120669120670120671

PART NUMBER

240644

NOMINAL LENGTH** (mm)

30060090012001500180021002400

NOMINAL LENGTH** (mm)

3006009001200150018002100240030060090012001500180021002400

Mounting Profile and Diffuser Details

50mm1.97in

38mm1.50in

40.50mm1.59in

86.50mm3.41in

L

14mm0.55in

6mm0.24in

2mm0.08in

END-TO-END MOUNTINGleave 2mm gap between mounting profiles

leave 4mm gap between diffusers

MOUNTING SLOT DIMENSIONSuse appropriate fastener for mounting surface

MOUNTING HOLE PATTERN

MOUNTING PROFILE DIMENSIONS

NOMINAL

30060090012001500180021002400

Lmm29859889811981498179820982398

D1mm1504507501050600750900750

D3mm-------750

D2mm----7509001050750

in11.7323.5435.3547.1758.9870.7982.6094.41

in5.9117.7229.5341.3423.6229.5335.4329.53

in-------29.53

in----29.5335.4335.4329.53

Ask factory about colored diffuser to match mono color LED versions

* Ordering logic configurations and quantities may be determined by specific details fo your installation. GVA’s Applications team can assist in specifying the appropriate configurations and quantities and create a Bill of Materials in the quoting process.**Custom lengths for diffusers and mounting profiles up to 4.8m are available, consult factory.

46mm1.81in

67mm2.64in

67mm2.64in

38mm1.50in

40.50mm1.59in

L

D1 D2 D3

!

Flat Diffuser Round Diffuser

59.40mm2.34in

46mm1.81in


PG-HL-DL 02.04.134

Accessories

FAMILY

HL-CABLE, TC-ER, 18AWG-3C, -40° TO 90° WET,600V, FT4, SUN RESITANT

FAMILY

HL-LEADER CABLE

FAMILY

HL-OUTPUT CABLE

FAMILY

HL-JUMPER CABLE

FAMILY

HL-CONNECTOR CAP(must be used at the end of each run)

PART NUMBER

280176

PART NUMBER

140170140171140172140173

PART NUMBER

140187140188140189140190

PART NUMBER

140191140192140193140194140197140198

PART NUMBER

230866

LENGTH

PER METER

LENGTH

5M10M20M30M

LENGTH

150MM300MM500MM1M

LENGTH

150MM300MM500MM1M5M10M

Installation Accesories

To complete your installation, accessories such as lead cables and jumper cables may be needed. Additional lengths of un-terminated cable may also be ordered for wiring between junction boxes. Maximum cable lengths specified in the system diagram (pg.2) must be observed. Only cable supplied by GVA Lighting, Inc. will be sufficient to maintain cULus safety certification.

HL-Connector Cap must be used on the output connector of the last module on each circuit in order to maintain safety requirements and IP rating.!

PG-HL-DL 02.04.135

Product Specifications

HL-DL (per 300mm segment)

Electrical Rated Input Voltage

Power Consumption

Rated Current for Circuit

380VDC

4.8W

5W

10A @ t 30°C, 8A @ t 50°Ca a

2Luminance (diffuser surface brightness)(cd/m )

18 x 3-in-1 RGB or mono color LEDs

399

661

1058

134

536

795

1156

3900

4000

Light Source

Control Interface

Fixture Connections

GVA Lighting's proprietory ZH control interface or No Control for On/Off only

IP68 rated mating connectors

Optical

Control

Certification &

Safety

Nominal

Typical

Maximum

Maximum

Red (RGB)

Green (RGB)

Blue (RGB)

Yellow (RGB)

Magenta (RGB)

Cyan (RGB)

White (RGB)

3500K

6500K

Housing

Rated Operating Temperature

Rated Lifetime (L70 @ 23°C)

Environment

Lisitngs

IEC Classification

50 x 86.5

1.97 x 3.41

0.5

1.1

Injection molded, flame retardant polymeric body and lens, potted and sealed

Extruded aluminum mounting profile, A41 anodized

Extruded PMMA diffuser, impact resistant, UV stable

-40°C to +50°C, -40°F to +122°F

115,000hrs

Dry or Damp or Wet Locations, 0-100% humidity, IP66

PhysicalWidth x Height

Weight

mm

inches

kg

lbs

cULus, CE, ROHS

Class 1 LED luminaire


™CREATING NEW BEAUTY FOR OUR HOME PLANET

GVA Lighting, Inc. 3400 Ridgeway Drive, # 14Mississauga, Ontario L5L 0A2, CanadaPhone: + 1 905 569 6044Toll Free Phone (Canada and USA): 1 877 GVA LIGT or 1 877 482 5448Fax: + 1 905 569 9823 Email: [email protected]

gvalighting.com

Power-Data Box

Electrical Rated Input Voltage

Output Voltage

84~264VAC

380VDC nominal

200 modules

366 modules**

672 modules**

672 modules**

Input

Output Data

Length x Width x Height

Weight

Housing

Environment

No Control, DMX512, 2DMX512, DALI, ARTNET, TRIAC, 0-10V

GVA Lighting's proprietory ZH control interface or No Control for On/Off only

360 x 286 x 70

14.17 x 11.26 x 2.76

3.42

7.52

14ga. Aluminum, Black Powdercoat

Dry locations only

Control

Physical

@120VAC Input

@220-240VAC Input

mm

in

@120VAC Input

@220-240VAC Input

kg

lbs

Maximum Modules per PDB-2000 (2000W)

Maximum Modules per PDB-3800* (3800W)

* Under development**For RGB version, max length is 341 modules (2 DMX universes) for 300mm/1ft addressabilityThese figures are subject to change due to further development and innovations.See SP-PDB-XXXX for full Power-Data Box specifications

GVA-HL-DL 02.04.13

Documents

Transcript of GVA-HL-DL 02.04.13