GV30 GV30A SERIES - Maxitrol · Operati ng Knob Temperature Knob 1. OFF The operati ng knob is in...

download GV30 GV30A SERIES - Maxitrol · Operati ng Knob Temperature Knob 1. OFF The operati ng knob is in OFF positi on. The mag-net unit is closed. 2. PILOT IGNITION Turn the operati ng

If you can't read please download the document

Transcript of GV30 GV30A SERIES - Maxitrol · Operati ng Knob Temperature Knob 1. OFF The operati ng knob is in...

  • R

    www.merti�kmaxitrol.com

    GV30 / GV30A SERIESGAS�COMBINATION�CONTROL�SYSTEMS�FOR�COMMERCIAL�COOKING�APPLIANCES

  • CONTENT

    1 �GENERAL�INFORMATION�� GV30�AND�GV30A�STANDARD�FEATURES�� OPTIONAL�TEMPERATURE�KNOBS�and�D-STEMS

    2 GV30�SERIES�–�FEATURES�and�OPTIONS

    3�� �GV30A�SERIES�–�FEATURES�and�OPTIONS

    4�� �TECHNICAL�DATA��� CONNECTIONS

    5 MAIN�VALVE�FUNCTION�for�GV30�and�GV30A

    6 GV30�SERIES�–�VALVE�FUNCTION

    7 GV30A�SERIES�–�VALVE�FUNCTION

    8�� TEMPERATURE�SENSORS

    9�� �GV�SERIES�SENSORS�� TEMPERATURE�CONTROL�CHARACTERISTICS�� WORKING�DIAGRAM

    10� PRESSURE�DROP�DIAGRAMS

    11� DIMENSIONS�and�WEIGHTS

    12� GV30A�SERIES�–�COMPONENTS�and�OPTIONS

    13� ACCESSORIES

    CERTIFICATIONS AND FUELS

    CE¡�Multifunctional�controls�for�gas�burning�appli-ances�group�2�according�to�DIN�EN�126�and�Gas�Appliances�Regulation�EU/2016/426�(GAR)

    ¡Thermoelectric� flame� supervision� device��according� to� EN� 125� and� Gas� Appliances��Regulation�EU/2016/426�(GAR)

    ¡Temperature�control�according�to�EN�257¡Suitable�for�use�with�gases�of�EN�437�gas�family�1,�2�and�3

    CSA¡�Combination�controls�for�gas�appliances��according�to:��-�ANSI�Z21.77/CSA�6.20�for�U.S.�and�Canada�-�ANSI�Z21.78/CSA�6.20�for�U.S.�and�Canada

    ¡�Suitable�for�natural,�manufactured,�mixed�gas-es,� liquefied�petroleum�gases,� and� LP�gas-air�mixtures

       On�request:

  • ©�201

    8�Merti�k

    �Maxitrol�GmbH

    �&�Co. KG

    ,�All�R

    ights�Reserved.�

    GV30 and GV30A STANDARD FEATURES

    ¡Compact�design�¡Pilot�gas�fi�lter¡Inlet�screen¡Thermoelectric�fl�ame�supervision�device¡Pilot�gas�adjustment�screw

    ¡Separate�temperature�knob¡Min.�rate�setti��ng�with�fi�xed�or�adjustable�orifi�ces¡Liquid�fi�lled�stainless�steel�temperature�sensor�¡�Inlet/outlet�connecti�ons�at�bott�om,�side,�or�both,�providing�various�inlet/outlet�combinati�ons

    GENERAL INFORMATION

    Oven �Griddle�Plate

    FryerBain-Marie

    ~   Main�Applicati�ons(additi�onal�applicati�ons�may�be�supported�upon�review)

    Merti�k�Maxitrol’s�GV�series�gas�combinati�on�con-trol�systems�precisely�and�effi��ciently�control�the�pilot�and�the�main�burner�of�gas�appliances.

    The�GV�series�suits�a�wide�range�of�commercial�cooking� appliances,� including� ovens,� griddle�plates,� fryers,� and� bain-maries.� Valves� can� be�customized�to�OEM�specifi�cati�ons.

    |    D-stems

    |    Temperature�knobs

    |    Operati�ng�knobs

    GV30 GV30A

    OPTIONAL TEMPERATURE KNOBS and D-STEMS

    Merti�k� Maxitrol� off�ers� various� D-stems� and�knobs�for�both�the�GV30�and�GV30A.�The�GV�series�can�be�equipped�with�aluminum�D-stems� (brass�opti�onal)� allowing�OEMs� to�use�their� own� knobs,� personalizing� the� appliance�front.�The�recalibrati�on�version�allows�a�change�of� the� temperature� setti��ng� within� a� defi�ned�range.� The� value�of� the� temperature� change� is�visible�at�the�scale.

    |     GV30/GV30A�Valves�for�commercial�cooking

    1

    GENERAL INFORMATION | GV30 AND GV30A STANDARD FEATURES | OPTIONAL TEMPERATURE KNOBS AND D-STEMS

  • GV30 SERIES – FEATURES and OPTIONS

    FEATURES¡Temperature�control�or�manual�operati�on¡Temperature�sensors:�various�ranges�between�13 °C�(55.4 °F)�and�340 °C�(644 °F)

    ¡Customized�to�OEM�specifi�cati�ons¡Stand-by�positi�on�independent�of�tempera-ture�setti��ng�with�rotary�slide�valve�to�shut�off��main�gas

    1 � Operati�ng�knob

    2 � �Temperature�knob

    3 � D-stem

    4 � Pressure�regulator

    |   GV30�with�plasti�c�knob�andintegrated�piezo�igniter

    |   GV30�with�microswitch�for�electronic�igniter

    |     GV30�with�D-stem�andintegrated�piezo�igniter

    OPTIONS¡Integrated�piezo�igniter�¡Microswitch�for�electronic�igniter�(9V/230V)¡Use�of�external�igniti�on�(piezo�or�match)¡D-stem�for�large�temperature�knobs¡D-stem�recalibrati�on�knob¡Integrated�pressure�regulator�or�thrott�le�(Thrott�le�CE�only)

    ¡Faceplate�and�large�temperature�knob

    1 2

    1 4 3

    1 3

    GV30 SERIES – FEATURES AND OPTIONS

    2

    4

  • ©�201

    8�Merti�k

    �Maxitrol�GmbH

    �&�Co. KG

    ,�All�R

    ights�Reserved.�

    1 � Operati�ng�knob

    2 � �Temperature�knob

    3 � D-stem

    4 � LED

    5 � Faceplate

    GV30A SERIES – FEATURES and OPTIONS

    FEATURES¡Temperature�control�or�manual�operati�on¡Temperature�sensors:�various�ranges�between�30 °C�(86 °F)�and�340 °C�(644 °F)

    ¡Higher�capacity�fl�ow�rates:�up�to�30 %�higher�capacity*

    ¡Customized�to�OEM�specifi�cati�ons¡Microswitch� that� interrupts� thermocurrent�circuit�

    |    GV30A�thermostati�c�version�with�faceplate,�large�temperature�knob�and�an�electronic�igniti�on�module�with�LED�pilot�fl�ame�indicati�on

    |    GV30A�manual�operati�on

    |    GV30A�(thermostati�c�operati�on)�with�D-stem�(Aluminum)

    OPTIONS¡Electronic�igniti�on�module�with�LED�pilot�fl�ame�indicati�on

    ¡Microswitch�for�electronic�igniter�(9V)¡Use�of�external�igniti�on�(piezo�or�match)¡D-stem�for�large�temperature�knobs¡D-stem�recalibrati�on�knob¡Faceplate�and�large�temperature�knob

    4

    1

    5

    2

    1

    2

    1

    3

    *Compared�to�GV30�series

    3

    GV30A SERIES – FEATURES AND OPTIONS

  • 5

    1

    23

    46

    7

    8

    10

    5

    9

    TECHNICAL DATA

    CONNECTIONS

    |    Valve�connecti�ons

    1 � �Inlet�pressure�tap

    2 � �Outlet�pressure�tap

    3 � Gas�side�inlet

    4 � �Gas�side�outlet

    5 � Mounti�ng�points

    6 � �Gas�bott�om�outlet

    7 � �Gas�bott�om�inlet

    8 � �Thermocouple�connecti�on

    9 � Pilot�gas�outlet

    10 � �Min.�rate�setti��ng�with�fi�xed�or�adjustable�orifi�ce

    CE – Certi fi cati onEU/2016/426�(GAR),�EN�126

    CSA – Certi fi cati onANSI�Z21.77/CSA�6.20�+ Z21.78/CSA�6.20

    Maximum Inlet Pressure 5�kPa�(50�mbar)�(20"�w.c.) 1/2�psi�=�3.45�kPa�(34.5�mbar)�(14"�w.c.)

    Pressure Drop / Capacity1.2�m3/h�or�1.45�m3/h�(GV30MAX)�air�at0.25�kPa�(2.5�mbar)�pressure�drop(2�m3/h�air�for�GV30A)

    65,000�BTU/hr*�at�1"�w.c.�pressure�drop(85,000�BTU/hr*�at�1"�w.c.�for�GV30A)

    Ambient TemperatureGV30/GV30A�gas�combinati�on�controlGV30A�(opti�onal)

    0 °C – 110 °C0 °C – 120 °C�(opti�onal)

    32 °F – 230 °F32 °F – 248 °F�(opti�onal)

    Integral Pressure Regulator(GV30�only)

    Class�C�according�to�EN�88adj.�range�0.5 – 4�kPa�(5 – 40�mbar)

    10,000�to�85,000�BTU/hr*�(ANSI�21.18)adj.�range�3" – 12"�w.c.

    Pipe Connecti on Thread(various�inlet /outlet�combinati�ons) Rp�3/8"�(ISO�7-1/EN�10226-1 ) 3/8"�NPT

    * Natural�gas�(dv�=�0.64;�1,000�BTU/cu.ft�)

    TECHNICAL DATA | CONNECTIONS

    4

  • © 2

    018

    Mer

    tik M

    axitr

    ol G

    mbH

    & C

    o. KG

    , All R

    ights

    Res

    erve

    d.

    MAIN VALVE FUNCTION for GV30 and GV30AMAIN VALVE FUNCTION FOR MAIN GASHIGH TO LOW AND SHUT OFFThermostatically� controlled� modulating� valve�that�maintains�the�set�point�temperature.�After�reaching� the� set� point� temperature,� the� valve�supplies�the�amount�of�gas�required�to�maintain�that�temperature.�When�low�fire�increases�tem-perature�above�the�set�point,�the�valve�will�shut�off�gas�to�main�burner.�

    HIGH TO LOW After� reaching� the� set� point� temperature,� the�thermostatically�controlled�valve�goes�to�low�fire�without�shutting�off.�When�required,�additional�heat�is�quickly�provided.

    HIGH TO LOWThe� manually� operated� valve� is� adjustable�between�low�fire�and�high�fire.

    HIGH AND SHUT OFFThermostatically� controlled� ON/OFF� valve.� The�valve� operates� at�maximum�BTU� rate� until� the�set� point� temperature� is� reached,� and� then� it�snaps�off.

    MAX. TO HIGH AND SHUT OFFThermostatically� controlled� ON/OFF� valve�with�additional� range� of� modulation� and� increased�capacity.

    Gas�fl

    ow

    Temperature / Knob�position

    1.2�m3/h�air�at�0.25�kPa�(2.5�mbar)

    0.9�m3/h�air�at�0.25�kPa�(2.5�mbar)

    1.45�m3/h�air�at�0.25�kPa�(2.5�mbar);0.9�m3/h�air�at�0.25�kPa�(2.5�mbar)

    1.2�m3/h�air�at�0.25�kPa�(2.5�mbar)

    1.2�m3/h�air�at�0.25�kPa�(2.5�mbar)

    Gas�fl

    ow

    Temperature

    Gas�fl

    ow

    Temperature

    Gas�fl

    ow

    Temperature

    Gas�fl

    ow

    Temperature

    5

    MAIN VALVE FUNCTION

  • GV30 SERIES – VALVE FUNCTION

    Operati�ng�Knob Temperature�Knob

    1. OFFThe�operati�ng�knob�is�in�OFF�positi�on.�The�mag-net�unit�is�closed.

    2. PILOT IGNITIONTurn� the� operati�ng� knob� to� IGN�positi�on;� push�down� and� hold.� The� magnet� unit� opens.� Con-ti�nue�turning�counterclockwise�to�pilot,�creati�ng�spark� to� ignite� pilot.� Repeat� sequence� if� pilot�does�not�light.

    3. LOW FIRE OPERATIONThe�operati�ng�knob�is� in�ON�positi�on.�The�tem-perature�at�sensor�is�slightly�lower�than�the�set�temperature.� Gas� fl�ows� through� the� low� fi�re�ON/OFF�valve.

    4. HIGH FIRE OPERATIONThe�operati�ng�knob�is� in�ON�positi�on.�The�tem-perature�at�sensor�is�lower�than�the�set�temper-ature.�Gas�fl�ows� through� the�high�fi�re�modula-ti�on�valve�and�low�fi�re�ON/OFF�valve.

    1

    1

    4

    2

    3

    3

    5

    1 � Magnet�unit

    2 � Outlet�to�pilot

    3 � ON/OFF�valve

    4 � �High�fi�re�modulati�on�valve

    5 � �Temperature�sensor

    GV30 SERIES – VALVE FUNCTION

    6

  • ©�201

    8�Merti�k

    �Maxitrol�GmbH

    �&�Co. KG

    ,�All�R

    ights�Reserved.�

    GV30A SERIES – VALVE FUNCTION

    1. OFFThe�operati�ng�knob�is�in�OFF�positi�on.�The�mag-net�unit�is�closed.�Main�gas�closed.

    2. ELECTRONIC IGNITIONTurn� the� operati�ng� knob� counterclockwise� to�ON/IGN�positi�on.�Press�down�and�hold� to�open�the�magnet�unit.�The�electronic�igniti�on�to�pilot�starts.�Either�the�external�piezo�or�batt�ery�igniter�can�be�used�to�start�the�igniti�on.�Main�gas�closed.

    3. LOW FIRE OPERATIONThe�operati�ng� knob� is� in�ON/IGN�positi�on.� The�temperature�at�sensor�is�slightly�lower�than�the�set�temperature.�Gas�fl�ows�through�the�low�fi�re�ON/OFF�valve.

    4. HIGH FIRE OPERATIONThe�operati�ng� knob� is� in�ON/IGN�positi�on.� The�temperature�at�sensor�is�lower�than�the�set�tem-perature.�Gas�fl�ows�through�the�high�fi�re�modu-lati�on�valve�and�low�fi�re�ON/OFF�valve.

    OFF

    ONIGN

    OFF

    ONIGN

    OFF

    ONIGN

    OFF

    ONIGN

    1 � Magnet�unit

    2 � Outlet�to�pilot

    3 � ON/OFF�valve

    4 � �High�fi�re�modulati�on�valve

    5 � �Temperature�sensor

    1

    12

    3

    34

    Operati�ng�Knob Temperature�Knob

    5 7

    GV30A SERIES – VALVE FUNCTION

  • TEMPERATURE SENSORS

    GV30�and�GV30A�gas�combinati�on�control�valves�were�specifi�cally�designed�for�commercial�cook-ing�equipment�and�appliances.�

    113�mm�|�ø�6�mm(4.45�inch�|�ø�0.24�inch)Bain-Marie�–�L

    160�mm�|�ø�5�mm(6.30�inch�|�ø�0.20�inch)Fryer�–�Y

    103�mm�|�ø�4�mm(4.06�inch�|�ø�0.16�inch)Griddle�Plate�–�Q

    87�mm�|�ø�4�mm(3.42�inch�|�ø�0.16�inch)Oven,�Griddle�Plate�–�Z

    90�mm�|�ø�5�mm(3.50�inch�|�ø�0.20�inch)Oven,�Griddle�Plate�–�O

    Temperature� sensors� are� stainless� steel,� and�each�assembly�is�precisely�calibrated�for�the�ap-plicati�ons�shown�below.

    TEMPERATURE SENSORS

    8

  • ©�201

    8�Mertik

    �Maxitrol�GmbH

    �&�Co. KG

    ,�All�R

    ights�Reserved.�

    WORKING DIAGRAM

    GV SERIES SENSORS

    Sensor Application Temperature�Range Capillary�Length Sensor�Length Sensor�Diameter�ø Sensor�Material

    °C °F mm ft mm inch mm inch

    L Bain-Marie 30 – 100 86 – 212 1,350 4.43 113 4.45 6 0.24 stainless�steel

    Y Fryer 110 – 190 230 – 374 1,100 3.61 160 6.30 5 0.20 stainless�steel

    Q Griddle�Plate 66 – 260 151 – 500 1,350 4.43 103 4.06 4 0.16 stainless�steel

    Z Oven,�Griddle�Plate 100 – 340 212 – 644 1,500 4.92 87 3.42 4 0.16 stainless�steel

    O Oven,�Griddle�Plate 90 – 340 194 – 644 1,350 4.43 90 3.50 5 0.20 stainless�steel

    TEMPERATURE CONTROL CHARACTERISTICS

    Sensor Application Temperature�Range T 1 T 2 T 3 Ambient�temperatureinfluence

    °C °F °C °F °C °F °C °F

    L Bain-Marie 30 – 100 86 – 212 6 11 9 16 14 25 1 : 0.33

    Y Fryer 110 – 190 230 – 375 7 13 – – – – 1 : 0.33

    Q Griddle�Plate 66 – 260 151 – 500 14 25 23 41 36 65 1 : 0.60

    Z Oven,�Griddle�Plate 100 – 340 212 – 644 18 32 29 52 44 79 1 : 0.80

    O Oven,�Griddle�Plate 90 – 340 194 – 644 13 23 21 38 32 58 1 : 0.50

    GV30 SERIESExample�for�set�point�range�(Oven)100 °C�to�340 °C�(212 °F�to�644 °F)

    100 %MIN

    T3

    T1

    MAX

    T2

    100 °C 340 °CSet�Point�Range(Temperature�°C)

    |��Temperature�knob�position��|

    Flow�Rate(%�of�Nominal�Value)

    Minimum�Rate(partial�load)

    Thermostatically� controlled� modulating� valves�regulate�the�set�point�temperature.�Once�the�set�point�temperature�is�reached,�the�valve�supplies�the� amount� of� gas� required� to� maintain� tem-perature.�When� low�fire� increases�temperature�above�the�set�point,�the�valve�will�shut�off�gas�to�main�burner.

    GV SERIES SENSORS | TEMPERATURE CONTROL CHARACTERISTICS | WORKING DIAGRAM

    9

  • PRESSURE DROP DIAGRAMS

    Pressure�drop�("�w.c.)

    Capa

    city�(

    BTU�pe

    r�hou

    r)

    160,000

    140,000

    120,000

    100,000

    80,000

    60,000

    180,000

    40,000

    20,000

    0.0 1.0 2.0 3.0 4.0

    PRESSURE DROP CAPACITY FOR NATURAL GASDensity�ratio�of�gas�to�air:�dv = 0.64�NG;�1,000�BTU/cu.ft

    PRESSURE DROP CHART

    PRESSURE DROP CAPACITY FOR NATURAL GASDensity�ratio�of�gas�to�air:�dv = 0.55�NG;�Hi = 9.99�kWh/m3

    Capa

    city�(

    kW)

    50

    40

    20

    30

    10

    00.0 1.00.2 0.4 0.6 0.8

    Pressure�drop�(∆p�kPa)

    �GV31� �GV30MAX�GV30A� �GV30

    0.1 Air 0.2 0.3 0.4 0.5 0.6 0.8 1.0 2.0 3.0 4.0

    0.1 NG�(dv = 0.64) 0.3 0.4 0.5 0.6 0.8 1.0 1.3 2.5 3.8 5.0

    0.1 LPG�(dv = 1.56) 0.2 0.2 0.3 0.4 0.5 0.6 0.8 1.6 2.4 3.2

    Pressure�drop�(∆p�kPa)

    Flow�rate�(m3/h)

    0.01

    0.03

    0.05

    0.08

    0.20

    0.40

    0.60

    1.00

    0.02

    0.04

    0.06

    0.10

    0.30

    0.50

    0.80

    10

    PRESSURE DROP DIAGRAMS

  • © 2

    018

    Mer

    tik M

    axitr

    ol G

    mbH

    & C

    o. KG

    , All R

    ights

    Res

    erve

    d.

    11 mm[ 0.43” ]

    8 mm[ 0.31” ]

    22 mm[ 0.87” ]

    25 mm[ 0.98” ]

    22 mm[ 0.87” ]

    11 mm[ 0.43” ]

    8 mm[ 0.31” ]

    25 mm[ 0.98” ]

    [ 1.06” ]ø 27 mm

    [ 1.54” ]ca. 39 mm

    [ 0.98” ]25 mm

    [ 0.31” ]8 mm

    [ 3.3” ]ca. 84 mmca. 81 mm

    [ 3.2” ]

    22 mm[ 0.87” ]

    25 mm[ 0.98” ]

    8 mm[ 0.31” ]

    DIMENSIONS and WEIGHTS

    GV30 SERIESWeight�approx.�420�g�(15�ounces)

    GV30A SERIESWeight�approx.�490�g�(17�ounces)

    1 � �Temperature�sensor

    2 � �Cover�printing�US�(optional)

    3 � Cover�printing�EU�(optional)

    4 � �Connection�for�igniter

    5 � Temperature�knob�(optional,�with�different�printing)

    6 � �Thermocurrent�interrupter

    7 � Faceplate�(optional,�with�different�printing�and�opening�for�LED)

    8 � LED

    [ 2.36 ]ø 60 mm

    [ 0.74 ]ø 18.8 mm

    [ 0.2 ]ø 5.1 mm

    [ 0.2 ]ø 5.1 mm

    [ 3.03 ]ca. 77 mm

    [ 0.2 ]ø 5.1 mm

    [ 1.69 ± 0.01 ]43 ± 0.15 mm

    [ 0.9 ]ca. 23 mm

    [ 1.04 ± 0.01 ]26.4 ± 0.15 mm

    [ 2.44 ± 0.01 ]62 ± 0.15 mm

    6

    5

    1

    ø 27 mm[ 1.06” ]

    ø 5.1 mm[ 0.2” ]

    5.1 mm[ 0.2” ]

    ø 27 mm[ 1.06” ]

    ca. 100 mm[ 3.95” ]

    43 ± 0.15 mm[ 1.69” ± 0.01” ]

    26.4 ± 0.15 mm[ 1.04” ± 0.01” ]

    62 ± 0.15 mm[ 2.44” ± 0.01” ]

    ø 5.1 mm[ 0.2” ]

    1

    [ 4.92 ]125 mm

    [ 3.07 ]78 mm

    [ 2.05 ]52 mm

    7898 mm[ 3.86” ]

    40.5 mm[ 1.59” ]

    2

    4

    98 mm[ 3.86” ]

    40.5 mm[ 1.59” ]

    3

    11

    DIMENSIONS AND WEIGHTS

  • GV30A SERIES – COMPONENTS and OPTIONS

    1) GV30A WITH PUSH BUTTON IGNITION

    2) GV30A WITH PUSH BUTTON IGNITION and LED

    BATTERY

    11

    1

    4

    CE

    7

    FD

    8

    3

    10

    6

    9

    2

    G

    1 � ���Pilot�burner�

    2 � �Temperature�knob�(opti�onal)

    3 � �Operati�ng�knob

    4 � �Faceplate�

    5 � Cover

    6 � Microswitch�1�(opti�onal)

    7 � Microswitch�2�(standard)

    8 � Interrupter�cable

    9 � �Thermocurrent�interrupter�

    10 � Temperature�sensor

    11 � �Igniti�on�cable�(opti�onal)

    A � �Cable�for�electronic�igniter�(opti�onal)�

    B � �Electronic�igniter�(opti�onal)�

    C � �Batt�ery�box�

    D � �Cable�for�batt�ery�box�

    E Electronic�igniti�on�module�with�LED�pilot�fl�ame�indicati�on�

    F � 8�wire�connecti�on�cable�

    G � Bicolor�LED�with�cable

    BATTERY

    9

    B

    7

    6

    3

    4

    810

    12

    11

    A

    Top�view

    4

    5

    GV30A SERIES – COMPONENTS AND OPTIONS

    12

  • ©�201

    8�Merti�k

    �Maxitrol�GmbH

    �&�Co. KG

    ,�All�R

    ights�Reserved.�

    Temperature�knob(G30A-ZKB…)

    Faceplate�for�GV30A�(G30A-ZBB…)

    Cover�for�GV30 Batt�ery�box�4x CC�for�GV30A�LED�version�(G30A-ZB4C)

    Electronic�igniter�(9V)(G30A-ZZI)

    Electronic�igniti�on�module�with�LED�pilot�fl�ame�indicati�on�

    (G30A-6M0B00)8�wire�connecti�on�cable�

    (G6R-C…)Cable�for�batt�ery�box��(G60-ZCB(S)90/…)

    Cable�for�electronic�igniter�(G30A-ZCI/1000)

    Igniti�on�cable�for�GV30A�(G60-ZKIS…)

    Igniti�on�cable�for�GV30�(G30-EZS…)

    Compression�fi�tti��ngs� Adapter�and�fi�tti��ng�for�15�mm�inlet�pipe�(G30-ZAH15)

    Plugs Adjustable�and�fi�xed�orifi�ces�

    Thermocurrent�interrupter�(G30-ZUSV…)

    Thermocurrent�interrupter�(G60-ZUSV…)

    Thermocouple(G30-ZPT…)

    Pilot�burner�(G30-ZP2M-L,�EU�only)Sealing�(G30-ZPS2)

    Pilot�gas�fi�tti��ng�(G30-ZPF…)Bicolor�LED�with�cable�

    (G30A-ZLB…)

    ACCESSORIES

    Igniti�on�cable�for�GV30G30-EZS…

    Igniti�on�cable�for�GV30A

    G60-ZKIS…

    Cable�for�electronic�igniter

    G30A-ZCI/1000

    Bicolor�LED�with�cableG30A-ZLB…

    Cable�for�batt�ery�box�with�90°�plug�

    G60-ZCB(S)90/…

    8�wire�connecti�on�cable

    G6R-C…

    �Connectormm�(inch)

    Length�mm�(inch)

    Length�mm�(inch)

    Length�mm�(inch)

    Length�mm�(inch)

    Length�mm�(inch)

    Length�mm�(inch)

    1.3�mm 550�(21.7)900�(35.4)500�(19.7)900�(35.4)

    1.6�mm425�(16.7)550�(21.7)800�(31.5)

    350�(13,8)500�(19.7)900�(35.4)

    1,000�(39.4) 120�(4.7)500���(19.7)

    1,500���(59.1)3,000�(118.1)

    350�(13.8)�500�(19.7)�

    1,800�(70.9)

    2.10�mm 600�(23.6)

    2.36�mm 900�(35.4) 275�(10,8)1,500�(59.1)

    2.45�mm 550�(21.7)1,200�(47.2)

    4�mm550�(21.7)900�(35.4)

    1,550�(61.0)

    500�(19.7)900�(35.4)

    1,200�(47.2)1,500�(59.1)

    2.8x0.5

    300�(11.8)550�(21.7)900�(35.4)

    1,200�(47.2)1,800�(70.9)

    350�(13,8)500�(19.7)900�(35.4)

    1,200�(47.2)1,500�(59.1)

    without 900�(35.4) 900�(35.4)

    ACCESSORIES

    13

  • © 2

    018

    Mer

    tik M

    axitr

    ol G

    mbH

    & C

    o. KG

    , All R

    ights

    Res

    erve

    d. Mertik Maxitrol GmbH & Co. KG

    Warnstedter�Str.�306502�Thale�|�GermanyTel.:�(+49)�3947�400-0Fax:�(+49)�3947�400-200�[email protected]

    Mertik Maxitrol GmbH & Co. KG The�Valleys�Innovation�CentreAbercynon,�South�Wales�CF45�4SN�|�UKDirect:��(+44)�1443�742-755Mobile:�(+44)�7866�[email protected]

    Mertik Maxitrol GmbH & Co. KGIndustriestr.�1�48308�Senden�|�GermanyTel.:�(+49)�2597�9632-0Fax:�(+49)�2597�9632-99�[email protected]

    EXCLUSIVE�AGENTMaxitrol Company�23555�Telegraph�Road�|�P.O.�Box�2230Southfield,�MI�48037-2230�|�USATel.:�(+1)�248 356-1400Fax:�(+1)�248 [email protected]

    ©�2018�Mertik�Maxitrol�GmbH�&�Co. KG,�All�Rights�Reserved.�

    R

    GV30

    .GV3

    0A-LC-EN

    -09.20

    18_C

    ooking