GURIT PRODUCT CATALOGUE · 2018-12-11 · Gurit SEA / NZ / AU Product Catalogue 2...

GURIT PRODUCT CATALOGUEAustralia, New Zealand and

South-East Asia [email protected]

[email protected]

www.gurit.comVersion 30 - November 2018

Cover photo credits: ©Tim Wright, Danish Yachts

GuritSEA/NZ/AUProductCatalogue 2 GPC_AUNZSEA_30_1118

Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials

and engineering. Gurit's unique approach integrates structural design, materials science and process

engineering to offer a complete turnkey composite solution.

Gurit offers a combination of innovative, durable, industry-leading composite products with unrivalled

in-house technical expertise, ensuring best-in-class operation wherever it is applied. The versatility

and durability of Gurit's products and in-depth engineering knowledge means every project delivers a

performance that is finely tuned to individual specifications and needs. Gurit's long history of

development and innovation has increased part quality and durability while continual streamlining of

processes have improved productivity and reduced costs.

Gurit offers an impressive portfolio of standardised and customised products suitable for a full range of

requirements, including a comprehensive range of tooling, reinforcement and prepreg materials.

Gurit's patent-approved, award-winning SPRINT™ technology offers lightweight, cost-effective

solutions for a number of applications, reducing production time and cost by up to 60%, and weight by

up to 40%. Gurit® Corecell™ is a leading structural foam core material, which has become widely

accepted for the construction of large, high performance structures.

How to use this Product Catalogue This catalogue has been produced to provide information on our product portfolio. Each individual

product code is categorised as one of the following:

Gurit is also well served by a network of representatives, who hold stocks of Gurit products locally,

and who can also act as a local point of contact for technical and sales information. A list of these

representatives is given at the end of this publication.

Brief descriptions of each product and product group are given throughout to facilitate product

selection, with full information on any product obtainable from the relevant technical datasheet. These

are available on the Gurit website, www.gurit.com, or by contacting customer support. Contact details

for customer support are given at the end of this publication.

The product catalogue structure is given in the contents page. For placing orders, contact details can

be found at the end of this product catalogue. Written orders may be provided by fax, letter or email.

Please use the order codes provided to ensure that you obtain the correct products.

Some Gurit products are subject to export control restrictions and destinations subject to

trade restrictions. Please contact your local Gurit Customer Support office for details.

AU/NZ = stocked product in Australia and New Zealand

AU = stocked in Australia only

NZ = stocked in New Zealand only

SPECIALIST = please contact your local customer support team for product availability


Contents Prepreg & SPRINT™ Materials ............................................................................................. 4Fibre Definitions of HEC, IMC, HMC and UHMC............................................................................................4

Low Temperature Curing Prepreg & SPRINT™ Materials.............................................................................6

Performance Prepreg & SPRINT™ Materials..................................................................................................8

High Performance Prepreg Materials..............................................................................................................13

Aerospace Qualified Prepreg Materials..........................................................................................................17

Industrial Prepreg & SPRINT™ Materials.......................................................................................................18

Prepreg & SPRINT™ Ancillaries......................................................................................................................22

Fire Retardant Materials ..................................................................................................... 26Fire Retardant Laminating Systems................................................................................................................27

Fire Retardant SPRINT™ Systems.................................................................................................................27

Fire Retardant Prepreg Systems......................................................................................................................28

Core Materials ..................................................................................................................... 29Introduction..........................................................................................................................................................29

Forms of Supply..................................................................................................................................................30

Core Materials Range........................................................................................................................................32

Nomex Honeycomb............................................................................................................................................35

B³ Smartpac from Gurit......................................................................................................................................37

Adhesive Systems .............................................................................................................. 38Spabond Adhesives...........................................................................................................................................40

Smartfuse Adhesives.........................................................................................................................................43

Liquid & Filled Systems ...................................................................................................... 44Laminating Systems...........................................................................................................................................45

Infusion Systems................................................................................................................................................49

RTM System.......................................................................................................................................................51

Multi-Purpose Systems......................................................................................................................................52

Code Selector.....................................................................................................................................................53

Filling and Fairing...............................................................................................................................................55

Tooling Products.................................................................................................................................................56

Coatings...............................................................................................................................................................58

Reinforcements ................................................................................................................... 60Ancillary Products .............................................................................................................. 66Vacuum Consumables ........................................................................................................ 69Gurit Structural Engineering .............................................................................................. 72Gurit Mechanical Testing ................................................................................................... 73 Contact ................................................................................................................................. 73


Prepreg & SPRINT™ Materials

Gurit’s long history supplying out of autoclave prepregs to the wind energy & marine

industries has allowed Gurit to lead the way by introducing the next generation of

prepregs, specifically designed to make large composite component manufacture

faster, easier and cheaper.

Prepreg Materials

Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a pre-

catalysed resin system has been impregnated by a machine. The resin systems in these

materials react very slowly at room temperature, giving rise to working times of many days or

months. Prepreg resins can only be fully cured by heating them to the prescribed cure

temperature. The accuracy of the machinery used to combine the fabric or fibre with the

resin ensures that laminates produced from prepregs have more consistent and higher fibre

contents than can be achieved by wet lay-up techniques. This allows the use of very tough,

strong resin systems that would be too high in viscosity to be impregnated by hand.

SPRINT™ Materials

SPRINT™ materials consist of a layer of fibre reinforcement either side of a pre-cast, pre-

catalysed resin film with a very lightweight tack film on one face. The material therefore has

the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT™

materials are produced by a process that differs from conventional prepreg so that the fibres

in the reinforcements remain dry and un-impregnated by the resin. SPRINT™ materials are

laid up in a mould and vacuum bagged as for conventional prepreg. However, when the

vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in

the fibre bundles and between layers to be easily removed. When the temperature is then

raised for the cure, the resin film softens and flows into the air-free reinforcement. The void

content of the resultant laminate is extremely low (typically 0-0.5%).

Fibre Definitions of HEC, IMC, HMC and UHMC............................................................................................4

Low Temperature Curing Prepreg & SPRINT™ Materials.............................................................................6

Performance Prepreg & SPRINT™ Materials..................................................................................................8

High Performance Prepreg Materials..............................................................................................................13

Aerospace Qualified Prepreg Materials..........................................................................................................17

Industrial Prepreg & SPRINT™ Materials.......................................................................................................18

Prepreg & SPRINT™ Ancillaries......................................................................................................................22


Fibre Definitions of HEC, IMC, HMC and UHMC

Fibre Description Strength (MPa) Modulus (GPa)

HEC High Elongation Carbon > 4000 227 to 257

IMC Intermediate Modulus Carbon > 4400 275 to 310

HMC High Modulus Carbon > 4300 365 to 405

UHMC Ultra High Modulus Carbon > 4000 420 to 455

Bespoke products are available for high-volume custom applications, where specific variants of width, resin content, fibre weight, tack levels and backers can be requested. For specific enquiries please contact your local customer support representative.

Gurit prepreg product formats are described as one of the following:

1PA – single release paper applied to one side only

1PO – single poly backer applied to one side only

POPA – one poly backer and one paper applied to either side

2DPE – two poly backers applied to each side

S/S – single sided SPRINT™ product

/XXXX – the 2nd reinforcement used in a double sided SPRINT™ e.g. /XC305

/CM – manufactured for cosmetic applications

GuritSEA/NZ/AUProductCatalogue 6 GPC-APAC-29-1117

Low Temperature Curing Prepreg & SPRINT™ Materials

Gurit’s range of low temperature curing prepregs have been developed to allow for the use of cost-effective tooling solutions in the construction of large components.

Product Selector

Format System Main Features Fastest Cure

Recommended Processing Method Max Tg1

Typical Applications

Prepreg SE 70 ¬ Curable at 70°C in thick sections

¬ Available in SPRINT™ and prepreg formats

¬ Range of compatible 70°C curing products

25 mins at 120°C

¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging

126°C

Sandwich structures with honeycomb, foam and balsa cores

SPRINT™ ST 70

SE 70 SE 70 is a family of hot melt, low temperature (70ºC) cure, epoxy prepreg systems. They have been developed for use in the construction of large components using low energy cure cycles, and have an out-life of 28 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths.

ST 70 This is a low temperature (70ºC) cure, SPRINT™ system. Developed for use in the construction of large components using low energy cure cycles, it has an out-life of 21 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths. ST 70 is DNV-GL approved for some glass and carbon products. Please contact your customer support representative for more information.

GuritAU/NZ/SEAProductCatalogue 7 GPC_AUNZSEA_30_1118

Code Selector Low Temperature Curing Prepreg SE 70

Reinf. Wt (gsm)

Width (mm)

Resin Content (%) Format Length

(lm) Quantity

(m2) MOQ (m2) Order Code Availability

Unidirectional High Elongation Carbon (HEC)

HEC 200 400 35 2DPE 200 80 160 PP53-5948 NZ

HEC 300 400 35 POPA 150 60 120 PP53-4165 SPECIALIST

HEC 300 400 35 2DPE 150 60 120 PP53-6104 NZ

Unidirectional High Modulus Carbon (HMC)

HMC 300 400 33 POPA 150 60 120 PP53-5783 SPECIALIST

Woven High Elongation Carbon (HEC)

RC200T 194 1270 40 1PO 60 76.2 76.2 PP13-3792 SPECIALIST

RC200T 194 1270 38 2DPE 50 63.5 63.5 PP13-5944 NZ



RC660T 660 1270 40 2DPE 25 31.75 63.5 PP13-6592 SPECIALIST

Stitched Multi-axial High Elongation Carbon (HEC)

XC411 410 1270 42 2DPE 40 50.8 50.8 PP23-5716 NZ

Stitched Multi-axial E-Glass

QE600 600 1200 42 1PO 25 30 60 PP21-6035 SPECIALIST

Peel Ply

NPP80 80 1000 50 1PA 100 100 100 PP15-4245 SPECIALIST

Resin Film

SE 70 Film 0 1270 100 No Carrier 150 190.5 190.5 PP00-5809 SPECIALIST

Low Temperature Curing SPRINT™ ST 70

Reinf. Wt

(gsm)

Width (mm)

Resin Content

(%) Format Tack

Film Length

(lm) Quantity



RC416T 416 1270 42 S/S No 100 127 127 SA13-4493 SPECIALIST

RC416T 416 1270 42 S/S MET STL No 100 127 127 ST13-7092 SPECIALIST

RC303T/RC303T 600 1270 42 F/S POPA Yes 15 19.05 57.15 SA13-4555 SPECIALIST


XC411 410 1270 42 S/S No 25 31.75 31.75 SA23-4494 SPECIALIST


QE1200 1200 1200 42 S/S No 10 12 60 ST21-5613 SPECIALIST

QE1174 1174 1270 42 S/S No 150 190.5 190.5 ST21-5395 SPECIALIST


WRE581T 580 1250 48 S/S No 100 125 TBC ST11-5631 SPECIALIST

AU/NZ = stocked product




For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.


Performance Prepreg & SPRINT™ Materials

Gurit’s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options.

Product Selector


Recommended Processing Method

Max Tg1


Prepreg SE 84LV

¬ Versatile high-strength prepreg system

¬ Curable at 80°C in thick sections

60 mins at 120°C


115°C

High performance light-weight, high-stress structures – round the world yacht hulls and decks

SPRINT™ ST 94

¬ Drape and tackiness optimised for excellent handling

¬ Ideal for complex or vertical mouldings

¬ Excellent balance of mechanical performance and toughness

45 mins at 120°C


115°C

Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing

SPRINT™ ST 95

¬ Good balance of mechanical properties

¬ Dry fabric resin infusion enables efficient air evacuation

¬ Toughened – resistant to micro-cracking

60 mins at 120°C


125°C High volume industrial grade toughened SPRINT™ material

SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at temperatures as low as 80°C, or it can be used for faster moulding of components at 120°C. This is achieved with an extremely good out-life of up to 56 days at 21°C. SE 84LV is a tough system, and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres.

ST 94 ST 94 is a toughened SPRINT™ system offering a good balance of mechanical properties. It comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The resin film has a medium tack that makes it ideal for vertical surface applications. Although moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying single SPRINT™ layers.

ST 95 ST 95 is a toughened SPRINT™ system that offers an extremely good balance of mechanical properties. With a minimum cure temperature of 85°C (with a suitable post-cure), it is ideal for structural components where improved performance and resistance to micro-cracking is desired. ST 95 resin matrix has good flow resistant characteristics that make it stable at room temperature (21°C). The product has a light tack on one side which aids placement in a mould tool. For details of cure schedules, please refer to data sheet.


Code Selector SE 84LV

Reinf. Wt (gsm)

Width (mm)


(lm) Quantity



HEC 150 400 37 POPA 200 80 160 PC53-4161 AU

HEC 150 400 35 POPA 200 80 160 PC53-4407 SPECIALIST



HEC 300 400 35 POPA 150 60 180 PC53-4163 AU/NZ


HEC 300 400 32 2DPE 150 60 180 PC53-7096 SPECIALIST




HEC 450 400 35 POPA 100 40 80 PC53-4159 AU


Unidirectional Intermediate Modulus Carbon (IMC)

IMC 150 400 37 POPA 200 80 160 PC53-6178 SPECIALIST


IMC 150 400 35 2DPE 200 80 160 PC53-6185 SPECIALIST



IMC 300 150 35 POPA 150 22.5 105 PC53-7072 SPECIALIST




Unidirectional High Modulus Carbon (HMC)

HMC 150 400 35 POPA 200 80 160 PC53-1807 SPECIALIST

HMC 150 400 32 2DPE 200 80 160 PC53-5581 SPECIALIST














Code Selector Continued SE 84LV

Reinf. Wt (gsm)

Width (mm)


(lm) Quantity



RC200T 200 1270 40 2DPE 50 63.5 50 PC13-5707 SPECIALIST

RC200T 194 1270 42 1PO 50 63.5 63.5 PC13-2646 SPECIALIST

RC200P 200 1270 42 1PO 50 63.5 63.5 PC13-5801 SPECIALIST



RC660T 660 1270 43.5 2DPE 20 25.4 50.8 PC13-4849 SPECIALIST



XC150 154 1270 40 1PO 75 95.25 95.25 PC23-5252 SPECIALIST


XC305 305 1270 39 2DPE 50 63.5 63.5 PC23-5931 SPECIALIST

XC411 410 1270 40 2DPE 30 38.1 76.2 PC23-5708 AU/NZ


XC611 615 1270 40 2dpe 25 31.75 63.5 PC23-4891 SPECIALIST

Woven E-Glass and Aramid

RE50P 47 1270 45 POPA 100 127 127 PC11-6514 SPECIALIST

RE100H4 105 1200 38 2DPE 100 120 120 PC11-6686 SPECIALIST

RE165T 160 1270 56 POPA 60 76.2 76.2 PC11-6771 SPECIALIST

RE295 292 1240 39 1PO 50 62 62 PC11-4005 SPECIALIST

RE301H8D 300 1270 40 POPA 25 31.75 63.5 PC11-5901 SPECIALIST

REA390S 390 1200 39 1PO 50 60 600 PC11-1741 SPECIALIST


XE603 606 1250 36 1PO 25 31.25 62.5 PC21-1747 SPECIALIST

XE905 942 1270 35 1PO 15 19.05 57.15 PC21-1748 SPECIALIST

QE1203 1203 1270 35 2DPE 100 127 127 PC21-1749 SPECIALIST

Peel Ply

NPP80 80 1000 50 1PA 100 100 100 PC15-1744 NZ







Performance Single Sided SPRINT™

ST 94

Reinf. Wt

(gsm)

Width (mm)

Resin Content (%) Format Tack

Film Length

(lm) Quantity



RC200T 200 1270 42 S/S No 100 127 127 SR13-6001 SPECIALIST

RC200T 200 1270 42 S/S No 50 63.5 63.5 SR13-2880 SPECIALIST




RC416T 416 1270 42 S/S No 100 127 127 SR13-7149 SPECIALIST




XC305 305 1270 42 S/S No 100 127 127 SR23-6829 SPECIALIST

XC411 410 1270 42 S/S No 25 31.75 63.5 SR23-3134 SPECIALIST

XC411 410 1270 42 S/S No 100 127 127 SR23-7150 SPECIALIST



QC800(HEC) 800 1270 40 S/S No 49 62.2 62.2 SR23-6910 SPECIALIST

Woven E-Glass

RE301H8 300 1270 35 S/S No 25 31.75 63.5 SR11-5877 SPECIALIST

RE400T 390 1250 52 S/S No 25 31.25 62.5 SR11-5820 SPECIALIST

RE400T 390 1250 35 S/S No 25 31.25 125 SR11-7002 SPECIALIST

WRE581T 580 1250 41 S/S No 25 31.25 123.8 SR11-6932 SPECIALIST

WRE581T 580 1250 33 S/S No 25 31.25 62.5 SR11-3219 SPECIALIST

WRE850T 850 1250 35 S/S No 16 20 60 SR11-5431 SPECIALIST

Stitched Multi-axial Glass and Aramid

XA450 465 1270 46 S/S No 20 25.4 50.8 SR22-5298 SPECIALIST

XE603 606 1255 35 S/S No 60 75.3 75.3 SR21-7062 SPECIALIST


XE603 606 1255 35 S/S No 60 75.3 75.3 SA21-2748 SPECIALIST



QE600 600 1200 33 S/S No 50 60 60 SR21-2518L SPECIALIST



Resin Film

ST 94 Film 0 1160 100 Resin Film No 100 116 116 SR00-6124 SPECIALIST


Performance Double Sided SPRINT™

ST 95

Reinf. Wt

(gsm)

Width (mm)

Resin Content

(%) Format Tack

Film Length

(lm) Quantity

(m2) MOQ (m2)

Order Code Availability


RC303T/RC303T 600 1270 51 F/S Yes 15 19.05 57.15 SL13-2878 SPECIALIST

RC416T/XC305 721 1270 56 F/S Yes 13 16.51 127 SL23-7000 SPECIALIST

RC416T/XC305 721 1270 52 F/S Yes 13 16.51 66.04 SL23-4384 SPECIALIST

RC416T/XC305 721 1270 42 F/S POPA Yes 100 127 127 SL23-6509 SPECIALIST



RC416T/XA450A 881 1270 48 F/S Yes 12.5 15.875 63.5 SL22-3775 SPECIALIST


+45C2/-45C2 422 1270 42 F/S POPA No 30 38.1 800.1 SL43-2057 SPECIALIST

+45E3/-45E3 600 1270 42 POPA Yes 18 22.86 68.58 SL41-3199 SPECIALIST


RE301/RE301 592 1270 36 F/S POPA Yes 15 19.05 57.15 SL11-2891 SPECIALIST

RA320/RA320 640 1270 45 F/S POPA Yes 15 19.05 57.15 SL12-5300 SPECIALIST

WRE581T/ WRE581T 1160 1250 48 F/S POPA Yes 48 60 60 SL11-7095 SPECIALIST

WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 100 125 125 SL11-2560L SPECIALIST

WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 10 12.5 50 SL11-2560 SPECIALIST







High Performance Prepreg Materials

Gurit’s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes.

Product Selector




SPRINT ST110 ¬ Car Body Panel

System SPRINT Resin

30 mins at 130°C

¬ Autoclave ¬ Vacuum Bag 115°C

Body and closure panels for automotive applications

Prepreg SC 110(T2)

¬ White spot free high clarity resin for cosmetic parts

¬ Versatile, high strength prepreg resin system

¬ Flexible cure as low as 80°C

20 mins at 150°C

¬ Autoclave ¬ Press Moulding 125°C

Ideal for high visual quality components without white-wash or white spots

Prepreg SC 160

¬ Class leading resin clarity

¬ High temperature performance

15 mins at 160°C

¬ Autoclave ¬ Press Moulding 180°C

Suitable for use in high temperature applications

Prepreg Smartcure™

¬ Rapid cure in less than 5 minutes

¬ Ideal for Hot-in Hot-out press moulding manufacture

5 mins at 150°C ¬ Press Moulding 175°C

High volume component manufacture.

ST 110 for Car Body SPRINT™ (CBS) Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.

For our range of surfacing films and syntactic core materials see Prepreg & SPRINT™ Ancillaries. SC 110(T2) SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production


output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80°C or even faster cures are achievable using press moulding technologies at temperatures up to 150°C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range.

SC 160 SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130°C or even faster cures are achievable using press moulding technologies at temperatures up to 160°C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160°C.

Smartcure™ Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates.

Gurit Smartcure™ is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints.


Code Selector ST 110

ST 110

Reinf. Wt (gsm)

Width (mm)

Resin Content (%) Format Length (lm) Quantity



RC200T(C) 194 1270 42 S/S 50 63.5 63.5 SA13-6158 SPECIALIST

Woven E-Glass

RE400T 390 1250 42 S/S 50 62.5 62.5 SA11-6157 SPECIALIST

Cosmetic Prepreg

SC 110(T2)

Reinf. Wt (gsm)

Width (mm)


(lm) Quantity



RC200P 200 1270 40 2DPE/CM 50 63.5 63.5 PA13-6404 SPECIALIST

RC200T 194 1270 40 2DPE/CM 50 63.5 63.5 PA13-6860 NZ

RC245T 245 1250 40 2DPE/CM 50 62.5 62.5 PA13-6355 SPECIALIST

RC245T 245 1250 38 POPA/CM 50 62.5 62.5 PA13-6975 SPECIALIST

RC380T 380 1250 40 2DPE 46 57.5 57.5 PA13-6425 SPECIALIST

RC400T 400 1270 40 2DPE/CM 25 31.75 254 PA13-6567 SPECIALIST

RC430P 430 1200 40 2DPE 25 30 60 PA13-6427 SPECIALIST



Black Pigmented (BL) Woven High Elongation Carbon (HEC)

RC200P 200 1270 40 POPA 50 63.5 63.5 PA13-7224 SPECIALIST

RC200T 194 1270 40 POPA 50 63.5 63.5 PA13-6988 SPECIALIST


XC305 305 1270 40 2DPE 50 63.5 63.5 PA23-6702 SPECIALIST

Stitched Multi-axial Glass

XE603 606 1255 35 2DPE 20 25.1 50.2 PA21-6465 SPECIALIST

SC 160

Reinf. Wt (gsm)

Width (mm)




RC200P 200 1270 40 2DPE/CM 50 63.5 63.5 PA13-6444 SPECIALIST












5 Minute Curing Prepreg

Smartcure™

Reinf. Wt (gsm) Width (mm) Resin

Content (%) Format Length (lm) Quantity (m2) Order Code Availability


HEC 195 1270 39 POPA 50 63.5 PA53-6489 SPECIALIST

HEC(TC35R) 195 1270 39 POPA 50 63.5 PA53-6857 SPECIALIST


RC200P 200 1270 42 POPA 50 63.5 PA13-6784 SPECIALIST

RC200T 194 1270 40 2DPE 50 63.5 PA13-6775 SPECIALIST

RC245T 245 1250 46 2DPE 50 62.5 PA13-6648 SPECIALIST

RC380T 380 1250 42 POPA 32 40 PA13-6630 SPECIALIST







Aerospace Qualified Prepreg Materials

Advanced Composite Materials for the Aerospace Industry

Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets.

Gurit offers three resin chemistries:

Chemistry Description

Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring.

Epoxy

Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels.

Cyanate Ester

Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for air-conditioning ducting construction in aerospace applications.

For further information on product availability contact your local Gurit sales office.


Industrial Prepreg & SPRINT™ Materials

Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.

Product Selector




Prepreg Sparpreg™

¬ UD prepreg ideal for thick structural sections

¬ Excellent handling & processing properties – no de-bulk

¬ Fully compatible with Gurit SPRINT™ and prepreg products

45 mins at 120°C


125°C

High quality monolithic unidirectional Components that require fast single shot production in thick sections

Prepreg

WE 91-1 ¬ High tack epoxy prepreg 45 mins

at 120°C


125°C

Large Structural components such as wind turbine blade shells and shear webs WE 91-2 ¬ Medium tack epoxy

prepreg

Prepreg WE 92

¬ Medium tack epoxy prepreg

¬ Cost effective for large structures

45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells and shear webs

SPRINT™ WT 93

¬ Low tack SPRINT™ resin matrix

¬ Dry fabric enables efficient air evacuation

45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells, shear webs, spars and roots

Sparpreg™

SparPreg™ is an advanced UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing.

WE 91-1 / WE 91-2

The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C.


All of this can be achieved together with an out-life of 60 days at 21°C. WE 91-2 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.

WE 92

WE 92 is a high flow epoxy prepreg ideally suited to the manufacture of thick sections. It can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.

WT 93

WT 93 is a SPRINT™ resin system that can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.

Gurit’s innovative WT 93 SPRINT™ product range uses a high flow, low tack epoxy prepreg and is ideally suited to the manufacture of thick sections such as turbine blade roots or spars.


Code Selector

Sparpreg™

Reinf. Wt (gsm)

Width (mm)




HEC 600 1240 34 2DPE 120 148.8 148.8 PA53-5995 SPECIALIST

HEC 600 300 34 2DPE 330 99 396 PA53-5924 SPECIALIST



Unidirectional E-Glass (EGL)

EGL 1600 900 32 2DPE 250 225 225 PA51-4994 SPECIALIST


RC660T 660 1270 40 2DPE 100 127 127 PA13-6399 SPECIALIST

WE 91-1

Reinf. Wt (gsm)

Width (mm)



Unidirectional E-Glass (EGL)

EGL 1200 900 32 2DPE 307 276.3 276.3 PA51-3984 SPECIALIST



EGL 1600 1000 32 2DPE 219 219 219 PA51-3989 SPECIALIST




Peel Ply

NPP80 80 110 50 S/S 50 5.5 49.5 SA15-3313 SPECIALIST

NPP80 80 1200 50 0 100 120 120 SA15-6090 SPECIALIST

NPP80 80 1000 50 S/S 50 50 50 SA15-3087 SPECIALIST

WE 91-2

Reinf. Wt (gsm)

Width (mm)




XE1000 1000 1250 48 2DPE 248 310 310 PA21-6094 SPECIALIST

XE603 600 245 45 1PO 125 30.625 122.5 PA21-5420 SPECIALIST

XE603 600 1255 45 POPA 378 474.39 474.39 PA21-4096 SPECIALIST







WE 92

Reinf. Wt (gsm)

Width (mm)




YE1200 1225 1260 43 2DPE 169 212.94 212.94 PA21-61601 SPECIALIST

WT 93

Reinf. Wt (gsm)

Width (mm)




XE603 600 1255 35 S/S 105 131.775 125.5 SA21-5224 SPECIALIST

+45E3/-45E3 600 1270 35 1PO 250 317.5 TBC SA41-4767R SPECIALIST

QE1174L 1174 1270 41 S/S 75 95.25 95.25 SA21-4390 SPECIALIST 1Includes 50g/m2 Fleece







Prepreg & SPRINT™ Ancillaries

To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes.

Product Selector

Format System Main Features Lowest Cure

Recommended Processing Method

Max Tg1


Adhesive Film

SA 70 ¬ Highly toughened resin

matrix ¬ Consistent bond-line

thickness and weight ¬ High strain to failure,

high toughness ¬ Excellent handling and

no mixing required

16 hrs at 70°C


110°C

Co-cure with 70°C prepregs for core and high strength adhesive bonding applications

SA 80 12 hrs at 80°C 100°C

Co-cure with 80°C prepregs for core and high strength adhesive bonding applications

Surface Films

SF 70 ¬ Surface film to generate a resin rich surface

¬ Suitable for sub-surface applications

16 hrs at 70°C ¬ Autoclave

¬ Press Moulding ¬ Vacuum Bagging

90°C Co-cure with 70°C prepregs for resin rich surface

SF 80 12 hrs at 80°C 100°C

Co-cure with 80°C prepregs for resin rich surface

SF 96

¬ Pinhole free surface for easy preparation and application of paint system

10 hrs at 85°C


115°C

Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting

SF 95VH ¬ Silicon carbide filled

film to generate very hard wearing surfaces

10 hrs at 85°C


130°C

Ideal for applications that require a highly toughened system such as car body undertrays

Intensifying Pastes

SP 11100

¬ Co-curable with prepreg systems

¬ Compatibility of handling and processing

¬ Ideal for core splicing and gap filling

16 hrs at 70°C


75°C Core splicing and gap filling with 70°C prepregs

SP 4832 12 hrs at 80°C 100°C

Low density, core splicing and gap filling with 80°C prepregs

SP 9435 12 hrs at 85°C 100°C

Core splicing, prevent bridging and gap filling with 85°C prepregs

Syntactic Core SY 110

¬ Lightweight drapable core material

¬ Co-curable with most Gurit Epoxy Prepregs & SPRINT™

¬ Fast lay-up times ¬ Available at 0.7mm

and 1.0mm thickness

12 hrs at 80°C ¬ Vacuum Bagging 110°C

Produces ultra-light and stiff panels


Adhesive Films

SA 70 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 70° C, or can be more quickly cured at temperatures above 120°C. The product has an out-life of 28 days.

SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 80°C, or can be more quickly cured at temperatures above 120°C. It has an out-life of 56 days at room temperature.

Surface Films

Gurit have a range of surfacing materials specific to a number of applications. SF 70 and 80 are pale green lightweight, sandable films curable at 70°C and 80°C respectively. It provides a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint finish can be applied.

SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive sector to protect vulnerable underbody components of both GT racing and sports cars which minimises fibre damage from foreign object impacts. For details of cure schedules, please refer to data sheet.

SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite components. Curable at 85°C with a vacuum only process it provides an easy sanding pinhole free surface finish with minimal print through from the underlying laminate. SF 96 provides a stable surface onto which a paint finish can be applied once lightly keyed.

Syntactic Core

SY 110 is a lightweight drapable core material that is designed to be co-curable with most Gurit Epoxy Prepregs & SPRINT™ to produce ultra-light and stiff panels. SY 110 has a wide process window, curing from 85-130ºC. SY 110 is available at 0.7mm and 1.0mm thickness.

Intensifying Pastes

Gurit’s mono-component pastes are pre-catalysed adhesive/filler systems that can be used in conjunction with Gurit prepregs and SPRINT™. They are used as in-situ fillers to bridge corners or tight radii and can also be used as core splicing adhesives. The system range covers black and white variants in high and low densities. Being pre-catalysed system, they require freezer storage for long-term stock holding. Out-life at 21°C is 20 days.


Code Selector

Adhesive Films SA 70

Reinf. Wt (gsm)

Width (mm)

Resin Weight (g) Format Length (lm) Quantity


SA 70 Film 0 1270 100g No Carrier 100 127 127 PP00-3640 SPECIALIST

SA 70 Film 0 1270 150g No Carrier 81 102.87 102.87 PP00-5549 SPECIALIST



SA 70 Film 25 1270 150g Scrim 100 127 127 PP11-3420 NZ

SA 70 Film 25 1270 250g Scrim 80 101.6 101.6 PP11-2279 NZ

SA 70 Film 25 1270 300g Scrim 100 127 88.9 PP11-3820 SPECIALIST

SA 70 Film 25 1270 400g Scrim 50 63.5 63.5 PP11-2278 SPECIALIST

SA 80

Reinf. Wt (gsm)

Width (mm)



SA 80 Film 0 1270 100g No Carrier 100 127 127 PC00-735 SPECIALIST

SA 80 Film 0 1270 150g No Carrier 100 127 127 PP00-5476 SPECIALIST


SA 80 Film 0 1270 250g No Carrier 80 101.6 101.6 PC00-4202 SPECIALIST




SA 80 Film 25 1270 150g Scrim 100 127 127 PC11-666 AU

SA 80 Film 25 1270 200g Scrim 80 101.6 101.6 PC11-669 SPECIALIST

SA 80 Film 25 1270 250g Scrim 80 101.6 101.6 PC11-579 AU/NZ

SA 80 Film 25 1270 250g Scrim 20* 25.4 101.6 PC11-7022 SPECIALIST




Black Pigmented (BL) Adhesive Film


SA 80 Film 25 1270 400g Scrim 60 76.2 152.4 PC11-6007 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied







Surfacing Films

Reinf. Wt (gsm)

Width (mm)



SF70 Film 138 1260 150g 2 Scrims 50 63 TBC SC11-4405 SPECIALIST

SF80 Film 138 1255 150g 2 Scrims 80 100.4 62.75 SC11-2829 SPECIALIST

SF80 Film 138 1255 150g 2 Scrims 20* 25.1 100.4 SC11-7021 SPECIALIST

SF80 Film 138 1255 150g 2 Scrims 80 100.4 100.4 SC11-6726** SPECIALIST

SF96 Film 138 1260 300g 2 Scrims 40 50.4 50.4 SA11-7004 SPECIALIST

SF96 Film 69 1260 700g Scrim 30 37.8 75.6 SA11-4587 SPECIALIST

SF95VH Film 50 1270 300g Scrim 50 63.5 63.5 SA11-1654 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied

Syntactic Core Films

SY 110

Width (mm)

Resin Weight (g)

Thickness (mm) Format Length

(lm) Quantity


SY 110 Film 1270 560 0.7 No Carrier 33 41.9 76.2 SA00-4606 SPECIALIST

SY 110 Film 1250 800 1.0 No Carrier 60 37.5 75 SA00-2691 SPECIALIST

Intensifying Pastes Size Units Description MOQ (Each) Order Code Availability

SP 11100 20 x 300 ml SP 11100 RESIN 300ml CARTRIDGE/BOX 20 1 FY1100-33 SPECIALIST

SP 4832 20 x 300 ml SP4832 RESIN 300ml CARTRIDGE/BOX 20 1 FX4832-33 AU/NZ

SP 9435 32 x 300 ml SP9435 RESIN 300ml CARTRIDGE/BOX 32 1 FX9435-21 SPECIALIST







Fire Retardant Materials

Gurit’s range of Fire Retardant (FR) products are designed to deliver high performance laminates whilst meeting demanding fire requirements. The ease of use and processing properties of these systems allow large parts to be manufactured in one operation using vacuum only consolidation.

The FR range is available in a wide variety of formats from ambient curing liquid systems to elevated temperature curing SPRINT™ products. Typical applications include cladding of buildings, interior and exterior train parts, commercial/military craft and fire protection on passenger ferries/superyachts.

Product Selector Format System Main Features Intended

Application Fire Test Standards

Laminating Ampreg 21FR

¬ Range of working times ¬ Capable of ambient only cures ¬ Ideal for wet laminating large

composite structures

Large Civil Structures

BS 476 (Parts 6 & 7) UL94

SPRINT™ ST 91FR

¬ Outstanding compressive properties ¬ Low void content vacuum bag

processing ¬ Controlled flow ¬ Light tack – suitable for use in higher

ambient temperature

Civil Structures ASTM E84 UL94 BS476 Part 7

Prepreg SE 90FRBL

¬ Black tinted resin ¬ Outstanding compressive properties ¬ Controlled flow ¬ Light tack

Civil Structures

Surface Film SF 80FROBL ¬ Effect FR layer to epoxy substrates ¬ High gloss black surface finish ¬ Resistant to Moisture ingress

Protection of structural components; engine bays and exhaust runs in marine craft

ISO 5660-1 FMVSS302

Fire Retardant Laminating Systems................................................................................................................27

Fire Retardant SPRINT™ Systems.................................................................................................................27

Fire Retardant Prepreg Systems......................................................................................................................28


Code Selector

Fire Retardant Laminating Systems

Ampreg™ 21FR Size Units Description Mix Ratio (R:H)

MOQ (Each)


Individual resin component size

Resin 257 kg AMPREG 21FR RESIN 257KG 2 F122-005 SPECIALIST

Resin 15.85 kg AMPREG 21FR RESIN 15.85KG 6 F122-004 SPECIALIST

Use the mix ratio to select recommended hardener component size

Standard 18 kg AMPREG21 HARD STD 18KG

100:21 (by weight)

1 F121-018 SPECIALIST

Standard 3.33 kg AMPREG21 HARD STD 3.33KG 1 F121-036 SPECIALIST

Slow 3.33 kg AMPREG21 HARD SLOW 3.33KG 1 F121-037 SPECIALIST

Extra Slow 18 kg AMPREG21 HARD EXT-SLOW 18KG 1 F121-020 SPECIALIST

Ultra Slow 900 kg AMPREG 21FR UL-SLOW HARD 900KG 100:18

(by weight)


Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG A/F 1 F122-008 SPECIALIST

Fire Retardant SPRINT™ Systems

SPRINT™ Reinf. Wt (gsm)

Width (mm) RC (%) Format Length (lm) Quantity


ST 91FR

XC411 410 1270 42 S/S 150 190.5 190.5 SA23-6855 SPECIALIST

XC611 615 1270 62 S/S 125 158.75 158.75 SA23-6240 SPECIALIST

WRE581T 580 1250 37 S/S 50 62.5 62.5 SA11-6361 SPECIALIST

YE905 911 1270 51 S/S 49 62.23 62.23 SA21-5615 SPECIALIST







Fire Retardant Prepreg Systems

Prepreg Reinf. Wt (gsm)

Width (mm) RC (%) Format Length (lm) Quantity (m2) MOQ

(m2) Order Code Availability

SE 90FRBL

XC411 410 1270 40 1PO 45 57.15 57.15 PG23-5123 SPECIALIST

Ancillaries Reinf. Reinf. Wt (gsm)

Width (mm)

Resin Weight (g) Format Length

(lm) Quantity

(m2) MOQ (m2)


SF 80FROBL Scrim 25 1270 220 Surface Film 60 76.2 76.2 SC00-2243 SPECIALIST

SF 80FROBL 2 Scrims 138 1260 220 Surface Film 50 63 63 SC11-5341 SPECIALIST







Core Materials

Introduction Cores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process.

Gurit® Corecell™ Gurit® Corecell™ is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit® Corecell™ has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit® Corecell™ grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas Germanischer Lloyd (DNVGL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals.

Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite application, as well as the addition of high temperature grades in 60 and 80 kg/m3 densities.

Gurit® Kerdyn™ Green Gurit® Kerdyn™ Green is a recyclable, thermoplastic foam produced out of 100% recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities.

Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit® Balsaflex™ is available in range of densities, thickness and format/finish. Gurit® Balsaflex™ is approved by Det Norske Veritas Germanischer Lloyd (DNVGL)


Forms of Supply Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements.

PL – Plain Sheet – Optimum material properties. Limited bending in-mould.

PH – Plain with Bleeder Holes – Assists air release in vacuum bag processes.

Cuts for conformability (Foam)

Gurit knife cut finish is standard on Gurit® Corecell™ and Gurit® Kerdyn™. Saw cut is standard for Gurit® PVC while knife cut finish on Gurit® PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information.

SC – Single Cut – Provides flexibility in a single direction on one or both sides of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet.

DC – Double Cut – Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet.

CS – Contour Scrim – Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only.


Forms of Supply VIC – Vacuum Infusion Core – There are several VIC options and Gurit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake.

Product Formats (Balsa)

Gurit® Balsaflex™ is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating.

Other Product Formats

Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method.

Fillet strips – Triangular edge strips to create tapered panel edge drop-offs, or stringer base fillets.

Kits – Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits.


Core Materials Range Gurit® Corecell™ M Gurit® Corecell™ M is the next generation of Gurit® Corecell™. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit® Corecell™ M benefits from American Bureau of Shipping (ABS), Det Norske Veritas Germanischer Lloyd (DNVGL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification.

Gurit® Corecell™ S Gurit® Corecell™ S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit® Corecell™ S is only available in full thickness.

Gurit® Corecell™ T Gurit® Corecell™ T is the lightest density Corecell™ foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit® Corecell™ T has ABS and DNVGL certifications.

Gurit® Kerdyn™ Green

Gurit® Kerdyn™ Green and Gurit® Kerdyn™ Green FR are both 100% recycled PET foam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range gained DNVGL certification.

Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit® PVC has DNV certification. The Gurit® PVC range also offers HT60 and HT80 with high temperature processing up to 140°C.

Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit® Balsaflex™ has DNVGL certification.


Code Selector

Gurit® Corecell™

Corecell Short Edge Marking Nominal Density Nominal

Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm

Gurit® Corecell™ M available from the Gurit AU / NZ and Gurit Tianjin (China) sites

M60 Yellow + Green 65 1285x2605 3-50 AU/NZ

M80 Yellow + Blue 85 1220x2440 3-50 AU/NZ

M100 Yellow + Black 107.5 1130x2275 3-48 AU/NZ

M130 Yellow + Light Brown 140 1015x2045 3-40 AU/NZ

M200 Yellow + Brown 200 915x1830 3-30 AU/NZ

Gurit® Corecell™ Tavailable from the Gurit sites in Magog (Canada) and in Tianjin (China).

T400 White + Green 71 1285x2605 3-53 SPECIALIST

T500 White + Blue 94 1195x2440 3-40 SPECIALIST

Gurit® Corecell™ Savailable from the Gurit site in Magog (Canada)

S1200 Red + Brown 210 890x1830 21-24 SPECIALIST

S1800 Red + Mauve 315 785x1600 16-21 SPECIALIST

Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information

Gurit® Kerdyn™ Green

Core Type Short Edge Marking Nominal Density Nominal

Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm

Gurit® Kerdyn™ Green available from the Gurit NZ and Gurit Tianjin (China) sites

80 Blue 80 1005/1220 x 2440 5-200 AU

100 Green 100 1005/1220 x 2440 5-200 NZ

115 Black 115 1005/1220 x 2440 5-175 SPECIALIST

135 Black + Green 135 1005/1220 x 2440 5-150 SPECIALIST

150 Orange 150 1005/1220 x 2440 5-135 SPECIALIST

200 Black + Yellow 200 1005/1220 x 2440 5-100 SPECIALIST

250 Black + Blue 250 1005/1220 x 2440 5-80 SPECIALIST

300 Black + Orange 300 1005/1220 x 2440 5-80 AU/NZ

Gurit® Kerdyn™ Green FR available from the Gurit Tianjin (China) site

80 Blue + Red 80 1005 x 2440 5-200 SPECIALIST

115 Black + Red 115 1005 x 2440 5-175 SPECIALIST

180 Brown + Red 180 1005 x 2440 5-110 SPECIALIST


Gurit® PVC and PVC HT


Sheet Size Unbonded Thickness

Range Availability

kg/m3 mm mm

Gurit® PVC is available through selected countries. Contact your local sales representative for more information.

40 Azure 40

1330 x 2850 3-84 NZ

48 Lilac 48 1270 x 2730 3-80 NZ

60 Yellow 60 1150 x 2450 3-78 AU/NZ

80 Green 80 1020 x 2180 3-72 AU/NZ

100 Red 100 950 x 2050 3-68 NZ

130 Blue 130 850 x 1900 3-58 NZ

200 Brown 200 750 x 1600 3-48 NZ

250 Green 250 700 x 1500 3-47 SPECIALISTZ

Gurit® PVC HT is available through selected countries. Contact your local sales representative for more information.

HT60 Pink 60

1120 x 2400 3-78 SPECIALIST

HT80 Light Yellow 80 1005 x 2150 3-75 SPECIALIST

Gurit® Balsaflex™


Sheet Size Unbonded Thickness

Range Availability

kg/m3 mm mm

Gurit® Balsaflex™ available from the Gurit sites in Equador and China.

110 Written 110

610x1220 6.35-55 SPECIALIST

150 Written 155 610x1220 6.35-55 SPECIALIST

220 Written 220 610x1220 6.35-55 SPECIALIST

Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information







Nomex Honeycomb Nomex Honeycomb - Plain Sheet (Hex)

Plain sheet Nomex is manufactured from Aramid paper & is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.

¬ The Ribbon direction is the TL direction ¬ Has the highest shear property (only direction only) of all three types of Nomex.

Average Density (kg/m3)

48 64 72 80 96

Sheet Length (mm) 2440 2440 2440 2440 2440

Width (mm) 1220 1220 1220 1220 1220

Area (m2) 2.98 2.98 2.98 2.98 2.98

Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request

Paper Thickness (um) 51 51 51 or 76 51 or 76 76

Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial

Cell Size 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm)

AU/NZ NZ SPECIALIST SPECIALIST SPECIALIST

Nomex Honeycomb – Over Expanded (OX)

The Over Expanded Nomex (OX) offers excellent formability over complex shapes but the shear properties are substantially lower than plain sheet Nomex.

¬ Good formability ¬ Low shear properties

The Ribbon direction is the TL direction Average Density (kg/m3)

29 48 64 72 80

Sheet Length (mm) 2438 2438 2438 2438 2438

Width (mm) 990 990 990 990 990

Area (m2) 2.41 2.41 2.41 2.41 2.41

Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request

Paper Thickness (um) 51 51 or 76 51 or 76 51 or 76 76

Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial

Cell Size 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm)

SPECIALIST/NZ SPECIALIST NZ SPECIALIST SPECIALIST


Nomex Guide - which Nomex should I use?

Partially Expanded Nomex (PX) is manufactured with 3/1000th inch (76um) Aramid paper which is 50% thicker than the standard paper used in both the plain sheet (Hex) and Over Expanded (OX). The result of this is that it offers substantially higher shear properties in both directions over the standard OX while still offering the formability of the Over Expanded cell shape.

¬ The shear properties of PX Nomex are fairly even in both the TW & TL directions but are substantially better than OX Nomex.

¬ The Ribbon direction is the TL direction Over Expanded Nomex (OX) is manufactured with 2/1000th inch (51um) Aramid paper. This offer excellent formability over complex shapes but the shear properties are substantially lower than both the PX & plain sheet Nomex.

¬ Good formability ¬ Low shear properties ¬ The Ribbon direction is the TL direction

Plain Sheet Nomex (Hex) is manufactured from 2/1000th inch (51um) Aramid paper and is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.

¬ The Ribbon direction is the TL direction ¬ Has the highest shear property (only direction only) of all three types of nomex.

High Shear Plain Sheet (HS Hex) is manufactured from 3/1000th inch (76um) Aramid paper. The shears are higher due to the thicker paper. Kevlar 636 Honeycomb is available, it must be noted that this material is expensive and inherently stiffer to bend around any shape. The shear properties are higher than standard Nomex material & may allow (depending on the structural engineers) weight saving by utilising lower densities.


B³ SmartPac from Gurit

B³ SmartPac is a versatile construction solution that helps builders manufacture composite components more efficiently and cost-effectively than ever before.

B³ SmartPac comprises all the reinforcement and core materials required for the job, pre-cut to the exact shape and size to fit the mould, and clearly labelled for alignment and location. The materials are packed in boxes in the order of assembly, and are accompanied by a comprehensive schematic and written construction manual, with a process defined in conjunction with the builder, and with integral quality controls.

B³ SmartPac Benefits ¬ Reduced overall costs through:

¬ reduced time in-mould ¬ reduced labour costs ¬ reduced waste levels ¬ reduced material costs

¬ Repeatable process with known costs and known quality ¬ Efficient procurement

¬ Order one B³ SmartPac instead of multiple materials ¬ One-stop-shop for materials, engineering, quality control, and process support

¬ Improved overall quality

The B³ SmartPac is suitable for many types of marine applications, and most processing techniques and products.

¬ Volume production boats ¬ Semi-custombuilds ¬ Custom builds ¬ Commercial/military boats ¬ Superyachts ¬ Hand lay-up ¬ Epoxy, vinylester, polyester ¬ Vacuum infusion ¬ Resin Transfer Moulding (RTM) ¬ Prepreg and SPRINT™

Whatever the requirement, Gurit can package and supply the B³ SmartPac to meet your specific needs.


Adhesive Systems

Spabond Adhesives

Spabond adhesives offer outstanding performance in high-stress, high-load applications for Marine, Wind Energy and Civil Engineering applications.

¬ Spabond 300 Series: structural, high dynamic load applications

¬ Spabond 500 Series: specialist substrate and applications

¬ Spabond 700 Series: for aesthetic carbon laminate applications

Smartfuse Adhesives

Smartfuse high performance industrial adhesives offer a range of working and fixture times when bonding multiple / dissimilar substrates for Automotive, Transportation, Industrial, Construction applications.

¬ Smartfuse Epoxy: high-modulus adhesive for structural applications

Gurit adhesive systems product descriptions may contain the following nomenclature:

S/S – straight sided metal pail for mixing machine extrusion and automated dispense

Please note: A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.


Adhesives Selector Guide

System Description Hardener Mix Ratio Working Time at 20°C

Clamp Time* at 20°C Sag Max

Temp

Spabond™ 300 Series: structural, high dynamic load applications

Spabond™ 335

Toughened gap filling epoxy adhesive system.

Fast (Black) 2:1 (by volume)

20 mins 6 hrs 5mm 65°C

Standard (Grey) 1 hr 9 hrs

Spabond™ 340LV HT

High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine.

Fast (Red) 2:1

(by volume)

½ hr 4 hrs 20 –

25mm 68°C Slow (Purple) 4 hrs 18hrs

Extra Slow (Blue) 6 hrs 24 hrs

Spabond™ 345

Highly sag resistant. Uses: highest performance marine projects

Fast (Black) 2:1

(by volume)

½ hr 5 ½ hrs 15 –

30mm

75°C

Slow (Red) 4 hrs 12 hrs 85°C

Extra Slow (Blue) 6 hrs 19 hrs 80°C

Spabond™ 500 Series: specialist substrate and applications

Spabond™ 5 Minute `Tacking and secondary bonding. 1:1

(by volume) 5 mins 20 mins 10 - 15mm 55°C

Spabond™ 540 Spabond™ 540LV

High elongation, long bonding times.

Fast (Red)

1:1 (by volume)

¾ hr 3 ½ hrs

20 – 30mm

56°C

Standard (Purple) 2 hrs 15 hrs 58°C

Low viscosity resin option for easier application.

Slow (Green) 4 hrs 25 hrs 52°C

Extra Slow (Blue) 6 ½ hrs tbc tbc

Spabond™ 568 Core bonding adhesive 2:1

(by volume) 5 ½ hrs 24 hrs 10mm 65°C

Spabond™ 570 Spabond™ 570LV

Easy mixing/smooth spreading. Bonds all woods 1:1

(by volume) 1 ½ hrs tbc 10 -20mm 55°C

Low viscosity hardener option for easier application

Spabond™ 700 Series: rapid structural adhesives

Spabond™ 730

High strength, rapid curing. General purpose adhesive.

1:1 (by volume) 10 mins 1 hr 10 -

15mm 60°C

Smartfuse™ Epoxy: industrial adhesive range

E1009

Bonds multiple substrates found in general applications. Ideal for cross-market applications - Automotive, Transportation, Industrial, Construction

1:1 (by volume) 10 mins 1 hr

0.2 - 20mm

50°C

E2025

2:1 (by volume)

25 mins 5 hrs 63°C

E2090 90 mins 10 hrs 61°C

E2350 350 mins 13 hrs 58°C

*clamp time is determined as the time to reach a cleavage strength of 2kN


Code Selector

Spabond™ 300 Series: structural, high dynamic load applications

Spabond™ 335 Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability

Resin 20 kg SP335 RESIN 20KG 6 F644-032 SPECIALIST

Fast 9.2 kg SP335 HARD FAST 9.2KG 100:46 (by weight) 1 F644-039 SPECIALIST

Standard 8.8 kg SP335 HARD STD 8.8KG 100:44 (by weight) 1 F644-036 SPECIALIST

Spabond™ 340LVHT Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code Availability

Resin and hardener pack sizes

HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20

1 F645-094 AU/NZ

HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 1 F645-046 SPECIALIST

HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 1 F645-095 AU/NZ

HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 1 F645-048 SPECIALIST

HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 1 F645-096 SPECIALIST

HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 1 F645-069 SPECIALIST


Resin 200 kg SP340LV RESIN 200KG


Resin 20 kg SP340LV RESIN 20KG 6 F645-053 AU/NZ

Resin 20 kg SP340LV RESIN 20KG S/S 6 F645-054 SPECIALIST


HT Fast 200 kg SP340 HARD FAST (HT) 200KG 100:49

(by weight)

1 F645-080 AU/NZ

HT Fast 20 kg SP340 HARD FAST (HT) 20KG 1 F645-078 SPECIALIST

HT Fast 10 kg SP340 HARD FAST (HT) 10KG 1 F645-097 AU

HT Slow 200 kg SP340 HARD SLOW (HT) 200KG 100:49

(by weight)

1 F645-071 AU/NZ

HT Slow 20 kg SP340 HARD SLOW (HT) 20KG 1 F645-072 SPECIALIST

HT Slow 10 kg SP340 HARD SLOW (HT) 10KG 1 F645-098 AU/NZ

HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG 100:47

(by weight)

1 F645-083 AU/NZ

HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG 1 F645-081 SPECIALIST

HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG 1 F645-099 AU/NZ







Spabond™ 345 Size Units Description Mix Ratio (R:H) MOQ



Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20

1 F646-016 AU/NZ Black Fast Pack 400 ml SP345 R/HFBL400ml CART/BOX 20 1 F646-024 AU/NZ

Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 1 F646-014 AU/NZ


Resin 20 kg SP345 RESIN 20KG

6 F646-038 AU

Resin 20 kg SP345 RESIN 20KG S/S 6 F646-047 SPECIALIST


Fast 20 kg SP345 HARD FAST 20KG 100:48

(by weight)


Fast 9.6 kg SP345 HARD FAST 9.6KG 1 F646-041 SPECIALIST

Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG 1 F646-042 AU

Slow 20 kg SP345 HARD SLOW 20KG 100:48 (by weight)


Slow 9.6 kg SP345 HARD SLOW 9.6KG 1 F646-043 SPECIALIST

Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48 (by weight) 1 F646-044 SPECIALIST

Spabond™ 500 Series: specialist substrate and applications

Spabond™ 5 Minute Size Units Description Mix Ratio

(R:H) MOQ



Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 1 F652-021 SPECIALIST

Resin 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20

1 F652-025 AU

Hardener 310 ml SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 1 F652-027 AU

Spabond™ 568 Size Units Description Mix Ratio

(R:H) MOQ



Resin 17.5 kg SP568 RESIN 17.5KG


Resin 10 kg SP568 RESIN 10KG (15.1L) 12 F654-021 SPECIALIST


Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG 100:44 (by weight)


Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L 1 F654-022 SPECIALIST







Spabond™ 540 Size Units Description Mix Ratio

(R:H) MOQ



Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12


Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 1 F648-045 SPECIALIST

Slow Pack 600 ml SP540LV R/HSL 600ml CART/BOX OF 12 1 F648-054 SPECIALIST




Resin 20 kg SP540 RESIN 20KG 6 F648-041 AU

LV Resin 20 kg SP540LV RESIN 20KG 6 F648-013 SPECIALIST

LV Resin 20 kg SP540LV RESIN 20KG S/S 6 F648-050 SPECIALIST


Fast 19.0 kg SP540 HARD FAST 19.0KG 100:95 (by weight)


Fast 19.0 kg SP540 HARD FAST 19.0KG S/S 1 F648-043 SPECIALIST

Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG 100:92

(by weight)


Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG S/S 7 F648-009 SPECIALIST

Standard 184 kg SP540 HARD STD 184KG 1 F648-033 SPECIALIST

Slow 18.6 kg SP540 SLOW HARDENER 18.6KG 100:93

(by weight)


Slow 18.6 kg SP540 SLOW HARDENER 18.6KG S/S 7 F648-051 AU

Slow 186 kg SP540 SLOW HARDENER 186KG 1 F648-038 SPECIALIST

Extra-slow 18.2 kg SP540 HARD EXTRA SLOW 18.2KG 100:91 (by weight) 7 F648-048 SPECIALIST






Resin 20 kg SP570 RESIN 20KG S/S 6 F640-023 SPECIALIST



Hardener 20 kg SP570 HARD STANDARD 20KG

100:100 (by weight)


Hardener 20 kg SP570 HARD STANDARD 20KG S/S 1 F640-024 SPECIALIST

Hardener 5 kg SP570 HARD STANDARD 5KG 1 F640-020 SPECIALIST

LV Hardener 5 kg SP570LV HARD STANDARD 5KG 1 F640-025 SPECIALIST

LV Hardener 20 kg SP570LV HARD STANDARD 20KG 1 F640-026 SPECIALIST


Spabond™ 700 Series: rapid structural adhesives




Pack 400 ml SP730 R/H 400ml CART/BOX 20 1 F650-007 SPECIALIST

Smartfuse™ Epoxy Series: rapid structural adhesives

Smartfuse™ Size Units Description Mix Ratio (R:H)

MOQ (Each)



Pack 400 ml SMARTFUSE E1009 R/H 400ml CART/BOX 12


Pack 400 ml SMARTFUSE E2025 R/HF 400ml CARTS/BOX 12 1 F655-004 SPECIALIST

Pack 400 ml SMARTFUSE E2090 R/HSL 400ml CARTS/BOX 12 1 F655-005 SPECIALIST

Pack 400 ml SMARTFUSE E2350 R/HXS 400ml CARTS/BOX 12 1 F655-006 SPECIALIST


E1 Resin 20 kg SMARTFUSE E1 RESIN 20KG S/S


E2 Resin 20 kg SMARTFUSE E2 RESIN 20KG S/S 1 F655-007 SPECIALIST


E1009 Hard 20 kg SMARTFUSE E1009 HARD 20KG S/S 1:1 (by weight) 1 F651-004 SPECIALIST

E2025 Hard 20 kg SMARTFUSE E2025 HARD 20KG S/S 2:1

(by weight)


E2090 Hard 20 kg SMARTFUSE E2090 HARD 20KG S/S 1 F655-009 SPECIALIST

E2350 Hard 20 kg SMARTFUSE E2350 HARD 20KG S/S 1 F655-010 SPECIALIST

For our range of dispense guns and mix heads, please refer to the Ancillary Products section.







Liquid & Filled Systems

Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs.

Gurit’s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems.

Laminating Systems...........................................................................................................................................45

Infusion Systems................................................................................................................................................49

RTM System.......................................................................................................................................................51

Multi-Purpose Systems......................................................................................................................................52

Code Selector.....................................................................................................................................................53

Filling and Fairing...............................................................................................................................................55

Tooling Products.................................................................................................................................................56

Coatings...............................................................................................................................................................58


Laminating Systems

The Ampreg™ wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.

Product Selector

System Description Hardener Speed Mix ratio Intended Application

Ampreg™ 30

Low toxicity laminating system; good wet-out & mechanical properties. Available with Light Reflective Technology (LRT)

Fast 1-2 hrs

100 : 26 (parts by weight)

Manufacture of large composite structures in the marine, wind and construction industries

Standard 2-3 hrs

Slow 4-7 hrs

Extra Slow 7-10 hrs

Ampreg™ 22 Good wet out; low by-product; good Tg generation

Fast 1-2 hrs

100 : 28 (parts by weight)

Medium to large mouldings

Standard 2-3 hrs

Slow 6-7 hrs

Extra Slow 7-10 hrs

14 hour 14 hrs

Ampreg™ 26

Premium laminating system with high mechanical properties and high Tg

Fast 1-2 hrs 100:33

(parts by weight)

High performance large mouldings Slow 7 hrs

Ultra Slow 8-10 hrs

Ampreg™ F230-1

3 component expanding epoxy system good for gap filling with consistent foam density

Slow Fully foamed less than 1 hr, Cure time varies with geometry

100:23 (parts by weight)

Rudder foils, crash bars

Extra Slow

Ampreg™ Thixotropic Pregel

Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating resins for applications where resin drainage is a concern.

Refer to product datasheet

Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26

Vertical and overhead laminating situations, particularly where heavy, open weave fabrics are being used

Ampreg™ Adhesion Promoter

A unique resin system formulated to promote the adhesion between epoxy and vinylester resin

Ampreg Adhesion Promoter for use with Ampreg 21, 22, and 26.


Existing polyester gelcoats with higher performance epoxy resins supplied by Gurit.


Code Selector Laminating Systems

Ampreg™ 30 Size Units Description Mix

Ratio (R:H)

MOQ (Each)



Fast Pack 4.662 kg AMPREG30 R/H FAST 4.662KG PACK



Fast Pack 1.26 kg AMPREG30 R/H FAST 1.26KG PACK 1 F127-035 SPECIALIST

Standard Pack 4.662 kg AMPREG30 R/H STANDARD 4.662KG PACK 1 F127-036 SPECIALIST

Standard Pack 1.26 kg AMPREG30 R/H STANDARD 1.26KG PACK 1 F127-037 SPECIALIST

Slow Pack 4.662 kg AMPREG30 R/H SLOW 4.662KG PACK 1 F127-038 SPECIALIST


Extra-slow Pack 4.662 kg AMPREG30 R/H EXTRA-SLOW 4.662KG PACK 1 F127-040 SPECIALIST

Extra-slow Pack 1.26 kg AMPREG30 R/H EXTRA-SLOW 1.26KG PACK 1 F127-041 SPECIALIST

Fast Pack 4.662 kg AMPREG30LRT R/H FAST 1.26KG PACK 1 F127-042 SPECIALIST

Fast Pack 1.26 kg AMPREG30LRT R/H FAST 4.66KG PACK 1 F127-043 SPECIALIST

Standard Pack 4.662 kg AMPREG30LRT R/H STANDARD 1.26KG PACK 1 F127-044 SPECIALIST

Standard Pack 1.26 kg AMPREG30LRT R/H STANDARD 4.66KG PACK 1 F127-045 SPECIALIST

Slow Pack 4.662 kg AMPREG30LRT R/H SLOW 1.26KG PACK 1 F127-046 SPECIALIST

Slow Pack 1.26 kg AMPREG30LRT R/H SLOW 4.66KG PACK 1 F127-047 SPECIALIST

Extra-slow Pack 4.662 kg AMPREG30LRT R/H EXTRA-SLOW 1.26KG PACK 1 F127-048 SPECIALIST

Extra-slow Pack 1.26 kg AMPREG30LRT R/H EXTRA-SLOW 4.66KG PACK 1 F127-049 SPECIALIST


Resin 1000 kg AMPREG30 RESIN 1000KG 100:26

(parts by weight)


Resin 219 kg AMPREG30 RESIN 219KG 1 F127-002 SPECIALIST



Fast 174 kg AMPREG30 HARD FAST 174KG



Fast 19 kg AMPREG30 HARD FAST 19KG 1 F127-007 SPECIALIST

Fast 19 kg AMPREG30 HARD FAST 19KG A/F 1 F127-008 SPECIALIST

Fast 4.68 kg AMPREG30 HARD FAST 4.68KG A/F 1 F127-010 SPECIALIST

Standard 174 kg AMPREG30 HARD STANDARD 174KG



Standard 19 kg AMPREG30 HARD STANDARD 19KG 1 F127-014 SPECIALIST

Standard 19 kg AMPREG30 HARD STANDARD 19KG A/F 1 F127-015 SPECIALIST

Standard 4.68 kg AMPREG30 HARD STANDARD 4.68KG A/F 1 F127-017 SPECIALIST

Slow 174 kg AMPREG30 HARD SLOW 174KG



Slow 19 kg AMPREG30 HARD SLOW 19KG 1 F127-021 SPECIALIST

Slow 19 kg AMPREG30 HARD SLOW 19KG A/F 1 F127-022 SPECIALIST

Slow 4.68 kg AMPREG30 HARD SLOW 4.68KG A/F 1 F127-024 SPECIALIST

Extra-slow 174 kg AMPREG30 HARD EXTRA-SLOW 174KG



Extra-slow 19 kg AMPREG30 HARD EXTRA-SLOW 19KG 1 F127-028 SPECIALIST

Extra-slow 19 kg AMPREG30 HARD EXTRA-SLOW 19KG A/F 1 F127-029 SPECIALIST

Extra-slow 4.68 kg AMPREG30 HARD EXTRA-SLOW 4.68KG A/F 1 F127-031 SPECIALIST







Ampreg™ 22 Size Units Description Mix Ratio (R:H) MOQ (Each)



Fast Pack 4.23 kg AMPREG22 R/H FAST 4.23KG PACK 10 F118-020 AU/NZ

Standard Pack 5 x 1 kg AMPREG22 R/H STD 5x1KG PACK 1 F118-059 SPECIALIST

Standard Pack 4.23 kg AMPREG22 R/H STD 4.23KG PACK 10 F118-048 AU/NZ

Slow Pack 4.23 kg AMPREG22 R/H SLOW 4.23KG PACK 10 F118-037 AU/NZ


Resin 1000 kg AMPREG22 RESIN 1000KG

1 F118-009 AU/NZ

Resin 193 kg AMPREG22 RESIN 193KG 1 F118-063 AU/NZ

Resin 20 kg AMPREG22 RESIN 20KG 6 F118-061 AU/NZ




100:28 (by weight)


Fast 180 kg AMPREG22 HARD FAST 180KG 1 F118-018 AU/NZ

Fast 18 kg AMPREG22 HARD FAST 18KG 1 F118-062 AU/NZ

Fast 5.6 kg AMPREG22 HARD FAST 5.6KG 1 F118-073 AU/NZ

Fast 2.8 kg AMPREG22 HARD FAST 2.8KG 1 F118-012 SPECIALIST

Standard 900 kg AMPREG22 HARD STD 900KG

100:28 (by weight)


Standard 180 kg AMPREG22 HARD STD 180KG 1 F118-042 AU/NZ

Standard 18 kg AMPREG22 HARD STD 18KG 1 F118-066 AU/NZ

Standard 5.6 kg AMPREG22 HARD STD 5.6KG 1 F118-074 AU/NZ

Standard 2.8 kg AMPREG22 HARD STD 2.8KG 1 F118-039 SPECIALIST


100:28 (by weight)

1 F118-051 AU/NZ

Slow 180 kg AMPREG22 HARD SLOW 180KG 1 F118-036 AU/NZ

Slow 18 kg AMPREG22 HARD SLOW 18KG 1 F118-065 AU/NZ

Slow 5.6 kg AMPREG22 HARD SLOW 5.6KG 1 F118-075 AU/NZ



Extra-slow 900 kg AMPREG22 HARD EXT-SLOW 900KG

100:28 (by weight)

1 F118-031 AU/NZ

Extra-slow 180 kg AMPREG22 HARD EXT-SLOW 180KG 1 F118-019 AU/NZ

Extra-slow 18 kg AMPREG22 HARD EXT-SLOW 18KG 1 F118-064 AU/NZ

Extra-slow 5.6 kg AMPREG22 HARD EXT-SLOW 5.6KG 1 F118-076 AU/NZ

Extra-slow 2.8 kg AMPREG22 HARD EXT-SLOW 2.8KG 1 F118-068 SPECIALIST







Ampreg™ 26 Size Units Description Mix Ratio (R:H) MOQ (Each)



Fast Pack 6.67 kg AMPREG26 R/H FAST 6.67KG PACK




Resin 216 kg AMPREG26 RESIN 216KG





100:33 (by weight)


Fast 18 kg AMPREG26 HARD FAST 18KG A/F 1 F116-043 SPECIALIST

Fast 6.66 kg AMPREG26 HARD FAST 6.66KG 1 F116-039 SPECIALIST

Fast 6.66 kg AMPREG26 HARD FAST 6.66KG A/F 1 F116-042 SPECIALIST


100:33 (by weight)






Foaming Epoxy System

F 230-1 Size Units Description Mix Ratio (R:H)

MOQ (Each)



Resin 14.5 kg AMPREG F230-1 RESIN 14.5KG 6 F113-007 AU

Individual hardener component size (includes Foaming Agent)

Slow Pack 3.53 kg AMPREG F230-1 HARD SLOW 3.53KG PACK A/F

100:23 (by weight) 1 F113-008 AU

Additional Foaming Agent if Required

Foaming Agent 0.2 kg AMPREG F230-1 FOAMING AGENT 0.2KG See

datasheet 1 FY8912-30 SPECIALIST

Ampreg™ Thixotropic Pregel

Ampreg TP Size Units Description Mix Ratio (R:H) MOQ (Each)


Resin 193 kg AMPREG TP RESIN 193KG Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26


Resin 20 kg AMPREG TP RESIN 20KG 6 F120-008 SPECIALIST

Ampreg™ Adhesion Promoter

Ampreg AP Size Units Description Mix Ratio (R:H) MOQ (Each)


Pack 20 kg AMPREG ADHESION PROMOTER 20KG

100:28 (by weight) 1 F119-002 SPECIALIST







Infusion Systems

The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.

PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding).

Product Selector


PRIME™ 27

Low viscosity, good mechanical properties, very low exotherm in thick sections

Fast 20 mins 100:28

(parts by weight) Suitable for the female moulding of large complex components

Slow 1 hr

Extra Slow 4 hrs

High Tg

3 hrs 20 mins 100:25

(parts by weight)


Code Selector

Infusion Systems

PRIME™ 27 Size Units Description Mix Ratio (R:H) MOQ (Each)



Resin 1000 kg PRIME27 RESIN 1000KG


Resin 214 kg PRIME27 RESIN 214KG 3 F160-041 AU

Resin 18.6 kg PRIME27 RESIN 18.6KG 6 F160-057 AU


Fast 900 kg PRIME HARD FAST 900KG

100:28 (by weight)


Fast 180 kg PRIME HARD FAST 180KG 1 F160-018 SPECIALIST

Fast 19 kg PRIME HARD FAST 19KG 1 F160-068 AU

Fast 5.2 kg PRIME HARD FAST 5.2KG 1 F160-053 AU

Fast 5.2 kg PRIME HARD FAST 5.2KG A/F 1 F160-096 SPECIALIST

Slow 900 kg PRIME HARD SLOW 900KG

100:28 (by weight)


Slow 180 kg PRIME HARD SLOW 180KG 1 F160-032 SPECIALIST

Slow 19 kg PRIME HARD SLOW 19KG 1 F160-069 AU

Slow 5.2 kg PRIME HARD SLOW 5.2KG 1 F160-054 AU

Slow 5.2 kg PRIME HARD SLOW 5.2KG A/F 1 F160-094 SPECIALIST

Extra-slow 900 kg PRIME HARD EX-SLOW 900KG

100:28 (by weight)


Extra-slow 180 kg PRIME HARD EX-SLOW 180KG 1 F160-028 SPECIALIST

Extra-slow 19 kg PRIME HARD EX-SLOW 19KG 1 F160-070 SPECIALIST

Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG 1 F160-055 SPECIALIST

High Tg 178 kg PRIME HIGH Tg HARDENER 178KG 100:25

(by weight)


High Tg 17.6 kg PRIME HIGH Tg HARDENER 17.6KG 1 F160-088 SPECIALIST

High Tg 8.8 kg PRIME HIGH Tg HARDENER 8.8KG 1 F160-087 SPECIALIST







RTM System

PRIME™ 180 High Tg Resin RTM System

PRIME™ 180 is a two-component toughened epoxy system specifically developed for RTM production of high-quality structural carbon components such as wheel rims, tubs, and structural parts. Low viscosity at low temperatures enables convenient manufacture of complex or thick section laminates. Following a post cure to 180°C, PRIME™ 180 features a good level of clarity which allows for carbon cosmetic finishes to be achieved directly from moulding. Coated with UV-resistant lacquer ensures long-term UV stability of the finished parts where required.

Code Selector

Prime™ 180 Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability

Resin 200 kg PRIME180 RESIN 200KG


Resin 20 kg PRIME180 RESIN 20KG 1 F168-001 SPECIALIST

Hardener 200 kg PRIME180 HARDENER 200KG 1:1 (by weight)


Hardener 20 kg PRIME180 HARDENER 20KG 1 F168-003 SPECIALIST







Multi-Purpose Systems

The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.

Product Selector


Handipack

Multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs.

Handipack 15 mins 100:50

(parts by volume)

Laminating, coating or as an adhesive or filling compound.

SP 106

All-purpose epoxy which can be used for gluing, coating, laminating and filling

Fast 15 mins


Clear coating for wood and other substrates, or for laminating.

Slow 20 mins

Extra Slow 35 mins

SP 115 Low viscosity, UV stable high clarity laminating system

115 30 mins 100:33

(parts by weight)

Surfboards, Clear parts

SP 320

Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.

Fast 15 mins 100:33

(parts by weight)

Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.

Slow 30 mins

Eposeal 300

Solvent-based, low viscosity epoxy primer with an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces.

EP 300 - 100:30 (by weight)

Developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc.


Code Selector

Handipack Multi-purpose Epoxy System

Handipack Size Units Description Mix Ratio (R:H) MOQ (Each)


Resin 10 litres HANDIPACK R/H+PUMPS 375ml, BOX OF 5 2:1 (by volume) 1 F520-011 SPECIALIST

SP106 Multi-purpose Epoxy System

SP 106 Size Units Description Mix Ratio (R:H)

MOQ (Each)



Fast Pack 3.02 kg SP106 RES/HARD FAST 3.02KG PACK

10 F510-041 NZ

Fast Pack 5 x 1 kg SP106 RES/HARD FAST 5x1KGPACK 1 F510-037 SPECIALIST

Slow Pack 3.02 kg SP106 RES/HARD SLOW 3.02KG PACK 10 F510-042 NZ

Slow Pack 5 x 1 kg SP106 RES/HARD SLOW 5x1KGPACK 1 F510-038 SPECIALIST




Resin 216 kg SP106 RESIN 216KG 1 F510-008 NZ

Resin 20 kg SP106 RESIN 20KG 6 F510-051 NZ

Resin 10 kg SP106 RESIN 10.0KG 12 F510-004 SPECIALIST


Fast 19.5 kg SP106 HARD FAST 19.5KG 100:18

(parts by weight)


Fast 3.6 kg SP106 HARD FAST 3.6KG 1 F510-018 NZ

Fast 1.8 kg SP106 HARD FAST 1.8 KG (0.9x2) 1 F510-019 SPECIALIST

Slow 180 kg SP106 HARD SLOW 180KG



Slow 19.5 kg SP106 HARD SLOW 19.5KG 1 F510-032 NZ

Slow 3.6 kg SP106 HARD SLOW 3.6KG 1 F510-053 NZ

Slow 1.8 kg SP106 HARD SLOW 1.8KG (0.9x2) 1 F510-031 NZ

Extra-slow 19.5 kg SP106 HARD EXTRA-SLOW 19.5KG 100:18 (parts by weight)


Extra-slow 3.6 kg SP106 HARD EXTRA-SLOW 3.6KG 1 F510-052 SPECIALIST

SP115 UV Stable, High Clarity Epoxy System

SP 115 Size Units Description Mix Ratio (R:H) MOQ (Each)



Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK


Pack 5 kg SP115 RESIN/HARD 5KG PACK 10 F110-020 AU






Hardener 16.5 kg SP115 HARD 16.5KG 100:33

(parts by weight)


Hardener 6.66 kg SP115 HARD 6.66KG 1 F110-026 SPECIALIST

Hardener 6.66 kg SP115 HARD 6.66KG A/F 1 F110-027 SPECIALIST


SP 320 Multi-purpose Epoxy Coating System


MOQ (Each)



Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK


Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK 1 F505-025 SPECIALIST

Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK 10 F505-028 SPECIALIST

Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK 10 F505-029 SPECIALIST





Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG

100:33 (by weight)


Fast Hardener 20 kg SP320 HARD FAST 20KG 1 F505-036 SPECIALIST

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG 1 F505-039 SPECIALIST

Slow Hardener 20 kg SP320 HARD SLOW 20KG 1 F505-037 SPECIALIST

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG A/F 1 F505-040 SPECIALIST

Eposeal 300 Wood Coating

Eposeal 300 Size Units Description Mix Ratio (R:H)

MOQ (Each)


Pack 5 x 1 litres SP300 EPOSEAL RES&HARD 5x1L PACKS 100:30 (by weight)


Pack 5 litres SP300 EPOSEAL RES&HARD 5L PACK 10 F705-012 SPECIALIST







Filling and Fairing

Gurit’s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sandability and compatibility with a wide range of primers. S-Fill 15 Minute Epoxy Filler System Gurit’s S’Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sandability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties.

S-Fair 600 Epoxy Fairing System S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature.

Code Selector S-Fill 15 Minute Epoxy Filler System

S-Fill 15 Min Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability

Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK 10 F930-006 SPECIALIST

S-Fair 600 Size Units Description Mix Ratio (R:H) MOQ



Resin 10 litres S FAIR 600 RESIN 10L

12 F920-003 SPECIALIST Resin 2.5 litres S FAIR 600 RESIN 2.5L 15 F920-001 SPECIALIST


Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 (by volume)

1 F920-110 SPECIALIST Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L 1 F920-111 SPECIALIST

Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 (by volume)

1 F920-004 SPECIALIST Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L 1 F920-002 SPECIALIST







Tooling Products

As the technical leaders in commercial composite materials, Gurit offers a complete range of composite tooling products.

Gurit's tooling product range consists of a tooling paste designed for pattern manufacture and a range of ambient curing mould materials that can be used up to an operating temperature of 160°C.

Product Selector

Type Product Operating Temperature Description

Tooling Pastes T-Paste 70-2 85°C

T-Paste 70-2 has been designed for customers looking for a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 combined with CNC technology allows more design freedom and improves pattern/direct mould accuracy whilst reducing production processes.

Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.

Gelcoats T-Gel 130-1 130°C

T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbon reinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130⁰C / 265⁰F tooling laminating, infusion and repair materials.

Laminating Systems T-Lam 130-1 130°C

T-Lam 130-1 is an epoxy tooling system designed for wet laminating glass or carbon moulds. T-Lam 130-1 is compatible with T-Prime 130-1.

Infusion Resin T-Prime 130 130°C T-Prime 130-1 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam 130-1 laminating.

Infusion Resin T-Prime 160 160°C T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds.


Code Selector

Tooling Pastes

T-Paste 70-2 Size Units Description Mix

Ratio (R:H)

MOQ (Each) Order Code Availability


Resin 15 kg T-PASTE 70-2 RESIN 15KG (S/S)

1 F940-103 SPECIALIST Resin 190 litres T-PASTE 70-2 RESIN 190L 1 F940-122 SPECIALIST Use the mix ratio to select recommended hardener component size

Hardener 190 litres T-PASTE 70-2 HARDENER 190L 100:100 (by

volume)

1 F940-123 SPECIALIST Hardener 50 kg T-PASTE 70-2 HARD 50KG (200L DRUM) A/F 1 F940-205 SPECIALIST Hardener 13.8 kg T-PASTE 70-2 HARDENER 13.8KG (S/S) 1 F940-104 SPECIALIST

Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.

Gelcoats

Laminating Systems

T-Lam 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)


Resin 20 kg T-LAM 130-1 RESIN 20KG 100:40 (by weight)


Hardener 8 kg T-LAM 130-1 HARDENER 8KG 1 F140-205 SPECIALIST

Infusion Systems

T-Prime 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)



Resin 185 kg T-PRIME 130-1 RESIN 185KG


Resin 12.5 kg T-PRIME 130-1 RESIN 12.5KG 2 F163-102 SPECIALIST


Hardener 16.7 kg T-PRIME 130-1 HARD 16.7KG 100:27 (by weight)


Hardener 3.4 kg T-PRIME 130-1 HARD 3.4KG 1 F163-103 SPECIALIST

T-Prime 160 Size Units Description Mix Ratio (R:H) MOQ



Resin 200 kg T-PRIME 160 RESIN 200KG


Resin 20 kg T-PRIME 160 RESIN 20KG 6 F166-005 SPECIALIST


Hardener 180 kg T-PRIME 160 HARDENER 180KG 100:35 (by weight)


Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F 1 F166-008 SPECIALIST

T-Gel 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)


Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK 100:49 (by weight) 3 F340-112 SPECIALIST


Coatings

Gurit’s range of coating epoxies is the foundation of our formulated products business. First developed in the early 1980's, specifically to meet the needs of the wooden boat builder/restorer, Gurit's comprehensive range of products is as popular today as when it was first introduced.

Our coating products are hard wearing and versatile partners for the multi-purpose systems. Available in both solvent and solvent-free formulations, coatings are suitable for a range of applications, including osmosis treatment, priming, top coating and varnishing.

Product Selector


CR 3400

Easy to sand, in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme.

Standard 5 hours 100:30

(parts by weight)

Designed to be backed up with Ampreg laminating systems and Prime infusion systems to give a sand-able surface ready for painting.

SP 115 Low viscosity, UV stable high clarity laminating system 115 30 mins


Surfboards, Clear parts

SP 320

Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.

Fast 15 mins 100:33

(parts by weight)

Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.

Slow 30 mins


Code Selector In-mould Process Coat

CR 3400 Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability


Pack 6.5 kg CR3400 RES/HARD STD 6.5KG PK 1 F346-012 SPECIALIST

Individual resin and hardener components

Resin 19 kg CR3400 RESIN 19KG 100:30 (by weight)


Hardener 5.7 kg CR3400 HARD STD 5.7KG 1 F346-015 SPECIALIST

SP115 UV Stable, High Clarity Epoxy System

SP 115 Size Units Description Mix Ratio (R:H) MOQ (Each)



Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK


Pack 5 kg SP115 RESIN/HARD 5KG PACK 10 F110-020 SPECIALIST






Hardener 16.5 kg SP115 HARD 16.5KG 100:33

(parts by weight)


Hardener 6.66 kg SP115 HARD 6.66KG 1 F110-026 SPECIALIST

Hardener 6.66 kg SP115 HARD 6.66KG A/F 1 F110-027 SPECIALIST

SP 320 Multi-purpose Epoxy Coating System


MOQ (Each)



Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK


Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK 1 F505-025 SPECIALIST

Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK 10 F505-028 SPECIALIST

Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK 10 F505-029 SPECIALIST





Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG

100:33 (by weight)


Fast Hardener 20 kg SP320 HARD FAST 20KG 1 F505-036 SPECIALIST

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG 1 F505-039 SPECIALIST

Slow Hardener 20 kg SP320 HARD SLOW 20KG 1 F505-037 SPECIALIST

Slow Hardener 20 kg SP320 HARD SLOW 20KG A/F 1 F505-040 SPECIALIST


Reinforcements

Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations and incorporate a variety of construction techniques in their manufacture.

Our range of Reinforcements is presented by fibre type:

¬ Glass Products – E Glass

¬ Carbon Products

¬ Hybrid combinations of the above fibres

Then sub-divided into the following categories, based on the orientations of the primary structural fibres / tows :

¬ Unidirectional Fabrics – A variety of construction styles with all structural fibres generally running at 0° where optimum mechanical properties or local reinforcement is required. The Style is generally Unitex (‘UT’) which offers a balance of handling properties.

¬ Woven Fabrics – A wide range of woven fabrics, available in plain, twill and satin weave formations with fibres at 0°/90°.

¬ Multiaxial Fabrics – Stitched construction with fibres at +/-45° or 0°/90° (Double Bias), 0°/+45°/-45° (Triaxial) and 0°/+45°/-45°/90° (Quadraxial). These products offer excellent mechanical properties, and have optimised fibre spread for high laminate quality.

¬ Tapes – Narrow (< 200mm) fabric versions of the above

Availability...............................................................................................................................................................................62

Reinforcement Nomenclature..............................................................................................................................................62

E-Glass Products...................................................................................................................................................................63

Chopped Strand Mat.............................................................................................................................................................65

Carbon Products....................................................................................................................................................................65

Aramid Products.....................................................................................................................................................................66


AvailabilityThe supply of dry reinforcements is subject to a minimum single roll quantity per style for most items. Smaller quantities of fabric are available from Gurit’s network of distributors, subject to cutting and handling charges.

This catalogue describes Gurit’s standard range of reinforcement materials. If your preferred reinforcement is not listed in the following pages, please contact Gurit, as we can offer alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard items may be subject to limited availability. Width availability may change from time to time.

For further information, confirmation of stock levels and technical advice on Gurit’s reinforcement materials - please contact your local Customer Support Team.

ReinforcementNomenclature1st Letter:

General Construction of Reinforcement Fabric

WR = Woven rovings - (glass)

R = Woven fabric - yarn (glass) or tows (carbon)

X = Double bias (±45°) stitched fabric

Q = Quadraxial (0°/90°/±45°) stitched fabric

Y = Triaxial (0°/±45°) stitched fabric

UT = Unitex woven low-crimp unidirectional fabric

UF = Unifibre non-woven unidirectional fabric

2nd Letter: Fibre Type (or Major Component in Hybrid)

E = E glass

S = S glass (or R glass)

C = Carbon

3rd letter:

2nd Fibre Type - Minor Component in Hybrid (as above);

also: (when present) T = Tape version

Final digit: Identifier to distinguish otherwise similar fabrics.

Suffix letter: For woven fabrics, the following suffixes indicate the weave:

P = Plain

T = 2x2 twill

S = 3x1 twill

T4 = 4x4 twill

Hx = Satin (where x = harness number)

C = Crowsfoot

B = Basket

Q = Quadran

Example:

UT-C300/500

UD carbon in Unitex

Nominal weight 300g/m2

Width 500mm


Code Selector E-Glass Products

Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability

Uni-directional Reinforcement Fabrics

UT-E250 500 200 100 m2 R161-015 NZ

UT-E500 500 100 50 m2 R161-021 AU/NZ

UE851-100 100 60 6 m2 4173 AU/NZ

UE851-150 150 50.2 7.53 m2 4174 AU/NZ

UE850-1270 1270 44 55.8 m2 4181 NZ

0/90° Woven Yarn

RE86P 1050 105 110.25 m2 R111-008 AU/NZ

RE165T 1270 105 133.35 m2 R111-203 AU/NZ

RE200 1020 100 102 m2 4040 AU/NZ

RE295H4 1240 105 130 m2 R111-113 AU

RE301H8D 1270 100 127 m2 R111-117 AU

RE290 1020 100 102 m2 4070 NZ

0/90° Woven Roving Yarn

WRE601-1270 1270 65.6 83.3 m2 4686 NZ

WRE801-1270 1270 49.2 62.5 m2 4687 NZ

±45° Double Bias Stitched Fabrics

XE150 1270 100 127 m2 R121-003-3 NZ

XE210 1270 100 127 m2 R121-003-2 AU

XE256 1270 100 127 m2 R121-003-1 AU

XE304 1270 100 127 m2 R121-190 AU/NZ

XE415-1270 1270 94.8 120.35 m2 4360 AU/NZ XE625-1270 1270 63 80 m2 4400B AU/NZ XE820-1270 1270 38.2 48.48 m2 4430 AU/NZ

With CSM Backing

XE435M225-1270 1270 52 66 m2 4490 AU/NZ XE602M225-1270 1270 47.1 59.85 m2 4540 AU/NZ /±45° Double Bias Stitched Tapes

XE415-100 100 94.8 9.5 lm 4363 NZ XE415-150 150 94.8 14.2 lm 4366 NZ XE415-200 200 94.8 19 lm 4364 NZ XE625-100 100 63 6.3 lm 4403B NZ XE625-150 150 63 9.45 lm 4406B NZ

XE625-200 200 63 12.6 lm 4409B NZ

XE820-100 100 38.2 3.8 lm 4433 NZ XE820-150 150 38.2 5.7 lm 4436 NZ XE820-200 200 38.2 7.6 lm 4438 NZ



/±45° Double Bias Stitched Tapes cont’d

With CSM Backing

XE602M225-100 100 47.1 4.71 lm 4543 NZ XE602M225-150 150 47.1 7.07 lm 4546 NZ

0/90° Biaxial Stitched Fabric

BE453-1270 1270 89 113.3 m2 4212 AU/NZ BE615-1270 1270 51.2 65.04 m2 4215 AU/NZ

BE825-1270 1270 47.6 60.5 m2 4234 NZ With CSM Backing

BE630M225-1270 1270 45.4 57.65 m2 4263 NZ

BE825M225-1270 1270 37.4 47.5 m2 4283 NZ

0°/±45° Triaxial Stitched Fabric

YE810U-1270 1270 38.9 49.4 m2 4628 NZ

ZE920U-1270 1270 34.3 43.56 m2 4615 NZ

0°/90°/±45° Quadraxial Stitched Fabric

QE610-1270 1270 51.9 65.88 m2 4655 AU/NZ

QE851-1270 1270 46.3 58.8 m2 4661 AU/NZ QE1190-1270 1270 33.1 42.05 m2 4672 AU/NZ

Matline


M200-1000 1000 80 80 m2 3692 NZ

M300-1000 1000 50 50 m2 3693 NZ

M500-1000 1000 30 30 m2 3695 NZ

AU/NZ = stocked product AU = stocked in Australia only NZ = stocked in New Zealand only



Carbon Products Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability

Uni-directional Reinforcement Fabrics

UT-C200 500 100 50 m2 R163-039-2 AU/NZ

UT-C300 500 125 62.5 m2 6344 AU/NZ

UT-C450 500 100 50 m2 6351 AU/NZ

Unidirectional Reinforcement Tapes

Non-crimp plain weave type (Unix) in carbon. Typical uses for these tapes are in the local reinforcement of predominantly glass composite structures, where the load paths are known.

RUCT170-65 65 50 3.25 Roll R163-006-2 AU

RUCT480-100 100 50 5 Roll 6353G AU

0/90° Woven Reinforcements

Gurit reserves the right to interchange 1000mm & 1270mm based upon availability Woven fabrics produced from HSC.

RC155T 1000 100 100 m2 R113-001-3 AU/NZ

RC155T 1200 100 120 m2 R113-001-4 AU

RC200T 1270 100 127 m2 R113-013-3 AU/NZ

RC200P 1270 100 127 m2 R113-007-9 AU/NZ

RC200(WS)T 1270 100 127 m2 R113-013-5 AU

RC241T 1200 100 120 m2 R113-013-7 AU/NZ

RC600T 1000 50 50 m2 6295 AU

±45° Double Bias Stitched Fabrics

XC101 1270 100 127 m2 R123-100-3 AU/NZ

XC151 1270 100 127 m2 R123-100-2 AU/NZ

XC302 1270 100 127 m2 R123-060 AU/NZ

XC411 1270 100 127 m2 6251A AU/NZ

Chopped Strand Mat Description Width (mm) Length (lm) Quantity (kg) Order Units Order Code Availability

CSM225-E-1040 1040 128.2 30 kg 4721 NZ

CSM300-P-1040 1040 96.15 30 kg 4738 NZ

CSM300-E-1040 1040 96.15 30 kg 4737 NZ

CSM450-E-1040 1040 64.1 30 kg 4747 NZ

CSM450-P-1040 1040 64.1 30 kg 4752 NZ

CSM600-P-1270 1270 45.9 35 kg 4765 NZ



Carbon Braided Sox

CSOX255-50 50 lm 6405 NZ

CSOX280-25 25 lm 6410 NZ

±45° Carbon Double Bias Stitched Tapes

XC 411-100 100 100 10 Roll 6252A NZ

XC 411-150 150 100 15 Roll 6249A NZ

Aramid Products


0/90° Woven

RA175P-1270 1270 50 63.5 m2 R112-003-2 NZ

RA320HS-1270 1270 50 63.5 m2 6141 NZ







Ancillary Products

In order to assist in the use of the wide range of materials manufactured and supplied by Gurit, a range of Ancillary Products are also available. These have been refined over many years to enable users to handle products safely and to obtain the very best results from Gurit materials. The Ancillary Products are grouped together into three main categories:

Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives. The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers.

Hollow spheres Increase the volume and reduce the density of any resin system and are used to make adhesive mixes and filling & fairing mixes.

¬ Microballoons: Brown microsphere filler powder used to make glues or paste fillers.

¬ Glass Bubbles: White microsphere filler powder used to make glues or paste fillers.

Short Fibres For adding strength to a resin and hardener mix used as a structural adhesive, short reinforcing fibres are often added which act in a similar strengthening way to the long reinforcing fibres used in composite construction.

¬ Microfibres: Cellulose fibres used to make adhesive mixes.

Flow Modifiers The most common material for modifying the flow properties of a resin mix is colloidal silica. This is a very fine powder which is added in conjunction with other fillers to ‘thicken’ mixes and reduce their flow on vertical surfaces (increase thixotropy).

¬ Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders.

Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of some of the Gurit products from each other, it is important that the correct solvents are selected for the intended application.

Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual appearance. Please contact Gurit Technical Support for further guidance on the correct usage / addition of pigments which can vary by product.

Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments.


Code Selector

Filler Powders

Description Approximate Volume Size Units Order Code Availability

Hollow spheres

MICROBALLOONS 0.3KG 3 litres 0.3 kg A225-003 AU

MICROBALLOONS 5KG 50 litres 5 kg A225-005 SPECIALIST

MICROBALLOONS 12KG 120 litres 12 kg A225-007 SPECIALIST

GLASS BUBBLES 0.12KG 1 – 1.5 litres (min order 5) 0.12 kg A230-005 SPECIALIST

GLASS BUBBLES 0.12KG 2 - 3 litres 0.3 kg A230-001 NZ

GLASS BUBBLES 0.12KG 30 - 50 litres 5 kg A230-003 SPECIALIST

Short Fibres

MICROFIBRES 0.5KG 5 litres 0.5 kg A215-003 SPECIALIST

MICROFIBRES 5KG 50 litres 5 kg A215-005 SPECIALIST

MICROFIBRES 10KG 100 litres 10 kg A215-008 SPECIALIST

Flow Modifiers

COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A220-003 AU/NZ

COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-005 SPECIALIST

COLLOIDAL SILICA 10KG 200 litres 10 kg A220-006 SPECIALIST

Cleaning Solvents

Description Application Size Units Order Code Availability

SP FAST EPOXY SOLVENT 5L Surface degreaser 5 litres A105-003 SPECIALIST

SP STD EPOXY SOLVENT 5L By-product remover 5 litres A108-003 SPECIALIST

Please note, Gurit’s solvent-free epoxies such as SP 106, Ampreg 22 should never have solvent added to them to ‘thin them down’. If a lower viscosity, thinner epoxy product is required then this should be achieved by gentle warming of the product, or warming the surface to which the product is applied. Note that any extra heat applied will also accelerate the product’s rate of cure. Alternatively, there may be a different Gurit epoxy product with a more suitable viscosity for the intended application. For the correct solvent for a given application, please see the resin systems data sheet for details.

Pigments

Description Colour Size Units Order Code Availability

SP PIGMENT WHITE 0.5KG White 0.5 kg A445-002 SPECIALIST

SP PIGMENT BLACK 0.5KG Black 0.5 kg A445-004 SPECIALIST







Code Selector Continued Application, Processing and Sundry items

Volume Description Size Units Order Code Availability

Dispense Guns

900ml Pneumatic / PC Cox Gun, PPA 1 EACH K215-039 SPECIALIST

600ml Pneumatic / PC Cox Gun, PPA 300A 1 EACH K215-050 SPECIALIST

400ml* Manual / Metix Gun DM400-01 1 EACH K215-021 SPECIALIST

400ml* Pneumatic / Metix Gun DM400-85-01 1 EACH K215-022 SPECIALIST

400ml* Sintex Dual Cartridge Gun 400ml 1 EACH K215-021-3 AU/NZ Dispense Gun Mix Heads

900ml Box of 20 x 16mm, 20 Element round mix head (screw connection) 1 EACH A640-021 SPECIALIST

600ml Box of 20 x 10.7mm, 20 Element square mix head (screw connection) 1 EACH A640-022 AU/NZ

400ml* Box of 20 x 10.7mm, 20 Element square mix head (screw connection) 1 EACH A640-022 AU/NZ *Suitable for both 1:1 and 2:1 Cartridge formats

Description Comments Size Units Order Code Availability

Miscellaneous Dispense Equipment

10cc Syringe* 1cc graduations 1 EACH A660-001 SPECIALIST

50cc Syringe* 10cc graduations 1 EACH A660-002 SPECIALIST

25 litre Drum Tap Small plastic 1 EACH K342-005 SPECIALIST

200 litre Drum Tap Large plastic 1 EACH K342-010 SPECIALIST

Plastic Mini-pump Pair Mini-pump pair for any 1kg pack 1 EACH K216-318 SPECIALIST

Pump Sets Please contact Gurit Customer Support for pump set availability

Application and Processing Items

Reusable Mixing Pots 0.5L (0.8L max) Minimum order of 100 1 EACH A640-013 SPECIALIST

Clear lid for Mixing Pots For use with A640-013 1 EACH A640-014 SPECIALIST

Mixing Sticks Box of 100 sticks 1 EACH A640-004 SPECIALIST

* Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use.







Vacuum Consumables

The range of vacuum consumables has been designed for use in a wide range of vacuum bag processes. Such processes include autoclave/ prepreg curing, wet lay-up, low temperature oven/ prepreg processes and infusion processes. Gurit has selected a specific range of products which are particularly suitable for working with Gurit's epoxy prepreg and laminating systems where they are regularly used for the curing of large composite structures at temperatures up to 150°C.

Sealant Tapes Sealant tape is used to seal the tool to the vacuum bag in order to provide an airtight seal. The tapes are tacky to ensure a positive seal is achieved against a variety of tool surfaces.

Peel Plies Peel plies are fine weave fabrics which are applied to the laminate stack to provide a clean, contaminant-free textured surface, suitable for secondary bonding, filling or painting. Our range is green in colour.

Release Films Release films are used to separate and release the laminate from the vacuum stack following the cure of the component. These films are perforated to allow a certain bleed of resin from the laminate into a breather material such as Econoweave 44W.

Breather Fabrics / Meshes Breather fabrics are used to absorb excess resin (bleed) from a laminate which is being cured under vacuum. The fabric also allows the air, or any volatiles, to be evacuated prior to, and during the cure cycle.

Vacuum Bagging Films Vacuum bagging films are used to effectively seal the whole of the area of the composite laminate to be cured.

Self Adhesive Mould Release Materials Self-adhesive mould release materials are used to cover moulds as an effective alternative to the use of release wax or liquids.

Flash / Release / Shrink Tapes Flash tapes are used to locate vacuum consumable materials or to mask off areas to be painted, sanded or to prevent damage. Some of these tapes have release qualities so they can be used as tool repair tapes if necessary. Shrinktapes are used to consolidate specific components.

For further information on product availability contact your local Gurit office.


Peel Plies

Description Order Code Availability

PP85-1270 Peelply Red Stripe 85 gsm x 1270mm 8052A AU

PP85-1000A Peelply Red Stripe 85 gsm x 1000mm V620-004-AP AU

PP80-150 Peelply Tracer Red Stripe 80 x 150mm 8056A NZ





Release Film


RFHT25B(P3)-1525 Perforated Release Film Blue 25mu P3 x 1525mm 8420 NZ

RFHT25B(P31)1525 Perforated Release Film Blue 25mu P31 x 1525mm 8426 NZ

RFHT25B(P6)-1525 Perforated Release Film Blue 25mu P6 x 1525mm 8425 NZ

RFMT25B(P16)-1525 Perforated Release Film Blue WL3700 25mu P16 x 1525mm 8452 NZ

RFMT50G(P)-1525 Perforated Release Film Green 50mu P x 1525mm 8450 NZ

RFMT50G(P6)1525 Perforated Release Film Green (Dahlar) 50mu P6 perf x 1525m 8451 NZ

RF50-2000 Release Film Non Perforated 50mu x 2000mm 8410 NZ

RFNP50-2000 Release Film Perforated 50mu x 2000mm 8411 NZ WL3600 MP22 WL3600 MP22 Perforated x 1200mm V600-002-AP AU WL3600 P3 WL3600 P3 Perforated x 1200mm V600-003-AP AU WL3600-P98-1200 Release Film P98 Perforated x 1200mm Low Temperature V600-024-AP AU RFMT30(P3)-1300 Perforated Release Film Blue 30mu 1300mm P3 Perforation 8455 AU RFMT30(P31)1500 Perforated Release Film Blue 30mu 1500mm P31 Perforation 8456 AU RFMT30B(P3)1500 Perforated Release Film Blue 30mu 1500mm (Perf 0.4mm dia,

6mm spacing) 8454 NZ

Vacuum Bagging Films


VFHT50G-4060 Vacuum Bag Film Green 50 Micron x 4060mm 8259 NZ

VFHT75G-2030 Vacuum Bag Film Green 75Micron x 2030mm 8278 NZ

VFHT75G-4060 Vacuum Bag Film Green 75Micron x 4060mm 8281 NZ

VFSL37G-1525 Stretchlon 200 .0015 x 60" x 1525mm 8205 NZ

VF125-4000 Vacuum Film 125mu x 4000mm 8210 NZ

VFHT50G-2794 Vac Bag Film Green 50 Micron x 2794 V680-001-AP AU

VFHT50R-4060 Vacuum Bag Film Red 50 Micron x 4060mm 8261 AU

VFHT50Y-4570 Vacuum Bag Film Yellow 50 Micron x 4570mm 8260 NZ




Mould Release Materials


PTFE-RF1000 V750-001 AU/NZ

Breather Fabrics/Meshes


BF150-1500 Breather 150g/m² x 1500 wide (150m²/roll) 8313 NZ

BM5-910 Mesh Breather / Bleeder x 910mm (45.5m² roll) 8340 NZ

BFW150-1520 Breather 150g/m² x 1520mm wide 8312 AU

TMS-G-1042 Hi Performance Resin Transfer Medium - 1042mm 8956 NZ

Sealant Tapes


ST3Y-12 Sealant Tape 3.2mm x 12.7mm Yellow, 7.62LM/roll 8535 NZ

ST3B-12 AT90B SEALANT TAPE 30x15M ROLL V700-001-AP NZ

ST3B-12 LG150 Sealant Tape 15m x 12mm x 3mm (20x15M Roll / Ctn) 8537 AU

ST3.5G-12.5 LG2000 Sealant Tape 8m X 12.5mm x 3.5mm (24x8M Roll / Ctn) 8538 AU

Other


VV-401C Vac Valve 401C In bag connections 8922 NZ ATAC2 Airtac 2 Spray Contact Adhesive 8520 NZ

GrapPowder.75 Graphite powder 0.75kg A235-001 AU

FB1-25 Flashbreaker 1/25mm V720-001 AU/NZ

FB1-50 Flashbreaker 50mm High Temp Pressure 8515 NZ

HST575-32 Heat Shrink Tape 32mm 8543 NZ

HST575-64 Heat Shrink Tape 64mm 8545 NZ

LFT75-178 Lay Flat Tubing .003 gauge x 178mm (228lm/roll) 8224 NZ

LFT75-304 Lay Flat Tubing .003 gauge x 304.8mm (305 lm/roll) 8227 NZ



PTFE 2-50 High Temp PTFE Pressure Sensitive Tape .002 x 2" 8505 NZ

QD500TF Quick Disconnects with Viton O-Rings 1/4" (threaded) 8927 NZ







Gurit Structural Engineering

Gurit’s engineering team has specialised in composite structures for over 35 years, with a heritage that was founded in some of the most demanding marine applications on the planet. Early on our design and analysis tools were honed on high level race boats, composite superyachts, high speed motor yachts and military vessels. Gurit now has considerable experience with innovative engineering of many different structures, across an ever expanding range of applications, with our focus being on the design of efficient and safe composite structures regardless of the application

¬ Industrial and Product design ¬ Marine ¬ Transportation ¬ Civil and Architectural structures ¬ Renewable energy

Gurit offers substantial experience and capacity in composites engineering with design offices in New Zealand, UK and France comprising 40 engineers and designers. The team incorporates finite element specialists experienced in the analysis of advanced composite structures and engineers experienced in production detailing and through build support. From concept through to detailed analysis and production support, and right through to in-service monitoring of structures, the Gurit engineering team offers a full spectrum of engineering design capabilities

Engineering Tasks include: ¬ Conceptual design ¬ Laminate design & optimisation ¬ Analysis using in-house tools ¬ FEA static, nonlinear and dynamic analysis including crash simulation ¬ CAD ¬ On-site engineering support ¬ On site data acquisition and monitoring ¬ Certification authority liaison ¬ Mechanical testing of materials in our accredited testing lab ¬ Weight and cost estimates and optimisation ¬ Design review, peer review, inspection and repair specifications

Software utilised in-house includes: ¬ Proprietary specialist software ¬ AutoCAD ¬ SolidWorks ¬ Rhino ¬ Patran/Nastran with laminate modeller


Gurit Mechanical Testing

Key to the design of composite materials is understanding how the material behaves and performs. Gurit engineering runs and internationally accredited mechanical testing laboratory specialised in FRP composites for our customers. Mechanical testing can be done for a number of purposes:

¬ design certification and third party approval of as-built properties ¬ post build surveyors, forensics or to establish repair specifications ¬ establish baseline materials properties for design ¬ research and development to test new idea, validate concepts and build methods

Key to the success of this laboratory is that it is run by experienced composite design engineers who are available to help you to design and appropriate materials test program for your needs. This includes design of test specimens for standard programs, design and implementation of customised and specific tests, interpretation and reporting on the results to enable them to be implemented into your project or process.

In addition to the mechanical testing at the Auckland site the test lab is also linked with Gurit's extensive test lab in the UK for a variety of testing for Tg, fibre weight fraction (by burnoff and microscopy) environmental exposures, as well as links to universities and commercial laboratories for specialised testing.

Mechanical testing laboratory set up with:

¬ Instron UTM 3369 with an 1148 50kN load cell. A-grade annual calibration report available upon request

¬ LVDT ¬ Extensometer ¬ Strain gauge controller

Gurit provides accredited testing to the following standards:

¬ ASTM D3039M-08 – Tensile testing of polymer matrix composite materials ¬ ASTM D790 – 07e1 – Single Skin Flexure (three point bend) ¬ ASTM D6272-01 – Single Skin Flexure (four-point bend) ¬ ASTM D3165-07 and ASTM D3528 -96 (2008) – Single and Double lap shear of

adhesive joints ¬ ASTM D2344 00 (2006) – Apparent interlaminar shear strength by short beam flexure ¬ ASTM D5961 – 08 – Bearing response of polymer matrix composites


a) Tensile tests in accordance with the following standards up to 50 kN force ASTM C 297/C 297M-04 Flatwise tensile strength of sandwich constructions ASTM D 1623-09 Tensile and tensile adhesion properties of rigid cellular plastics ASTM D 3039/D 3039M-08 Tensile properties of polymer matrix composite materials ISO 527-5:2009 Plastics Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

(b) Compression tests in accordance with the following standards up to 50 kN force ASTM C 365/C 365M-05 Flatwise compressive properties of sandwich cores ASTM D 695-08 Compressive properties of rigid plastics ASTM D 1621-04a Compressive properties of rigid cellular plastics ASTM D 6641/D 6641M-09 Compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture ISO 844:2007 Rigid cellular plastics – Determination of compression properties

(c) Flexure and stiffness in accordance with the following standards AS 3572.10-2002 Determination of the initial ring stiffness of glass filament reinforced plastic pipes (constant deflection test only) ASTM D 790 07e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D 2344/D 2344M-00(2006) Short-beam strength of polymer matrix composite materials and their laminates ASTM D 2412-02(2008) Determination of external loading characteristics of plastic pipe by parallel-plate loading ASTM 6272-02(2008) e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials by four-point bending ASTM D 7249/D 7249M -06 Facing properties of sandwich constructions by long beam flexure ASTM D 7250/D 7250M-06 Determining sandwich beam flexural and shear stiffness

(d) Shear strength in accordance with the following standards ASTM C393/C 393M-06 Core shear properties of sandwich constructions by beam flexure ASTM 3165-07 Strength properties of adhesives in shear by tension loading of single-lap-joint laminated assembles ASTM 3528-96(2008) Strength properties of double lap shear adhesive joints by tension

(e) Density and specific gravity in accordance with the following standards ASTM C 271/C 271M- 05 Density of sandwich core materials

(f) Constituent tests in accordance with the following standards ASTM D 3171-09 Constituent content of composite materials (weight fraction test only)

(h) Other tests ASTM D 5961/D 5961M-08 Bearing response of polymer matrix composite laminates (ultimate bearing strength test only)


Other custom and speciality testing:

¬ Hoop Tensile Strength of Pipe ISO 8521

¬ Longitudinal Tensile Strength of Pipe ISO 8513 ¬ AS 4257.6 (Plastic roof and wall cladding materials – determination of impact resistance)

Our accreditations:


Contact Gurit (Asia Pacific) Ltd is available during standard business hours Monday to Friday 0830 – 1700 (NZSDST/ AEST). Outside of these hours you will be greeted by an answering service with the option to leave a message.

Please use the contact numbers provided in the table below for all enquires.

Email and Website All personnel can be contacted directly by email. If you are not sure who to contact please use the generic customer support e-mail address instead.

Information on products can be found at our website www.gurit.com. The site contains the most up to date information on all products, available to download in PDF format.

Contacting Gurit Asia Pacific (APAC) Contacts

Main Switchboard Telephone Fax

Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262

Gurit (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378 Customer Support

Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262

Gurit (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378 Sales Team

Sales (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262

Sales (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378

Sales (SE Asia) +64 (0)9 415 6262 +64 (0)9 415 7262

Marketing Communications +64 (0)9 970 2943 +64 (0)9 415 7262

Engineering +64 (0)9 970 2942

General E-mail contact [email protected] [email protected]


Notes

Gurit AUNZSEA Product Catalogue-30-1118

[email protected]

[email protected]

www.gurit.com

GURIT PRODUCT CATALOGUE · 2018-12-11 · Gurit SEA / NZ / AU Product Catalogue 2...

Documents

Transcript of GURIT PRODUCT CATALOGUE · 2018-12-11 · Gurit SEA / NZ / AU Product Catalogue 2...