Guidelines for the Design of Shield Tunnel Lining
30
AITES ITA Towards an improved use of underground Space In Consultative Status, Category II with the United Nations Economic and Social Council http://www.ita-aites.org ASSOCIATION INTERNATIONALE DES TRAVAUX EN SOUTERRAIN INTERNATIONAL TUNNELLING ASSOCIATION Guidelines for the Design of Shield Tunnel Lining RESEARCH Title Topic Originally published Abstract: These guidelines, prepared by Working Group 2 (Research) of the International Tunnelling Association, are presented in three parts: Part I describes the outline of the procedure of design. Part II presents the detailed design methods. Part III provides references, including examples of design. Because the methods of designing shield tunnel linings vary, the guidelines do not recommend that priority be given to any one method. Rather, this report presents the basic concepts of shield tunnel linings, in order to provide reference and guidance in designing tunnel linings. Résumé: - Remarks: - in the Journal "Tunnelling and Underground Space Technology", Working Group: WG 2 - "Research" Author ITA WG Research Open Session, Seminar, Workshop: - Others: Guidelines Copyright © 2000, Elsevier Science Limited, www.elsevier.com; All Rights reserved. Vol. 15, Nr. 3, pp. 303 - 331, Year 2000. Secretariat : ITA-AITES c/o EPFL - Bât. GC – CH-1015 Lausanne - Switzerland Fax : +41 21 693 41 53 - Tel. : +41 21 693 23 10 - e-mail : [email protected] - www.ita-aites.org
Transcript of Guidelines for the Design of Shield Tunnel Lining
AITESITA
Towards animproved use
of undergroundSpace
In Consultative Status, Category II with theUnited Nations Economic and Social Council
http://www.ita-aites.org
ASSOCIATIONINTERNATIONALE DES TRAVAUX
EN SOUTERRAININTERNATIONALTUNNELLINGASSOCIATION
Guidelines for the Design of Shield Tunnel Lining
RESEARCHTitle
Topic
Originally published
Abstract: These guidelines, prepared by Working Group 2 (Research) of the International Tunnelling Association, are presented in three parts: Part I describes the outline of the procedure of design. Part II presents the detailed design methods. Part III provides references, including examples of design. Because the methods of designing shield tunnel linings vary, the guidelines do not recommend that priority be given to any one method. Rather, this report presents the basic concepts of shield tunnel linings, in order to provide reference and guidance in designing tunnel linings.
Résumé: -
Remarks: -
in the Journal "Tunnelling and Underground Space Technology",
Working Group: WG 2 - "Research"
AuthorITA WG Research
Open Session, Seminar, Workshop: -
Others: Guidelines
Copyright © 2000, Elsevier Science Limited, www.elsevier.com; All Rights reserved.Vol. 15, Nr. 3, pp. 303 - 331, Year 2000.
Secretariat : ITA-AITES c/o EPFL - Bât. GC – CH-1015 Lausanne - SwitzerlandFax : +41 21 693 41 53 - Tel. : +41 21 693 23 10 - e-mail : [email protected] - www.ita-aites.org
