Guide to Debricking Kindle Touch V4
-
Upload
victor2203 -
Category
Documents
-
view
449 -
download
33
Transcript of Guide to Debricking Kindle Touch V4
-
By Silver18
Kindle.
bricking.
I did all the process in Windows (XP in my case) and I worked on my Kindle Touch
5.1.0 (K5), so everything here applies to this version of Kindle.
KindleSelectBoot containing MfgTool.exe to select boot mode.
http://www.mobileread.com/forums/attachment.php?attachmentid=82836&
d=1329798296
Fastboot_win_public needed to replace images and/or kernels
http://www.mobileread.com/forums/attachment.php?attachmentid=83827&
d=1331579769
Kindle-Fastboot.inf and libusb-win32-bin-1.2.6.0 needed to make your PC
read Kindle in fastboot mode
http://www.mediafire.com/?t8myi35pk6323h2
http://www.mediafire.com/?yb8fbasxw002arj
Linux.inf needed to make your PC read Kindle in SSH
http://www.mediafire.com/?qbb5a6b4l6st1cs
Kindle forensic images, i.e. all img files and kernels. I used 5.0.0 images.
o diags_kernel.img: diags kernel.
http://www.mediafire.com/?wxv0eat6lcz6mx6
o mmcblk0p2_ssh.img: diags partition.
http://www.mediafire.com/?un3qrdfblfyl1d0
o kernel-kt-5.0.0.img: main kernel.
http://gitbrew.org/~dasmoover/kindle/touch/forensic/kernel-kt-
5.0.0.img.gz
o mmcblk0p1-kt-5.0.0.img: main partition.
http://gitbrew.org/~dasmoover/kindle/touch/forensic/mmcblk0p1-kt-
5.0.0.img
http://www.mobileread.com/forums/attachment.php?attachmentid=82836&d=1329798296http://www.mobileread.com/forums/attachment.php?attachmentid=82836&d=1329798296http://www.mobileread.com/forums/attachment.php?attachmentid=83827&d=1331579769http://www.mobileread.com/forums/attachment.php?attachmentid=83827&d=1331579769http://www.mediafire.com/?t8myi35pk6323h2http://www.mediafire.com/?yb8fbasxw002arjhttp://www.mediafire.com/?qbb5a6b4l6st1cshttp://www.mediafire.com/?wxv0eat6lcz6mx6http://www.mediafire.com/?un3qrdfblfyl1d0http://gitbrew.org/~dasmoover/kindle/touch/forensic/kernel-kt-5.0.0.img.gzhttp://gitbrew.org/~dasmoover/kindle/touch/forensic/kernel-kt-5.0.0.img.gzhttp://gitbrew.org/~dasmoover/kindle/touch/forensic/mmcblk0p1-kt-5.0.0.imghttp://gitbrew.org/~dasmoover/kindle/touch/forensic/mmcblk0p1-kt-5.0.0.img -
Putty: a simple SSH implementation for Windows and Unix
http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe
READ ALL THE GUIDE BEFORE STARTING DEBRICKING AND UNDERSTAND ALL STEPS!
Ok, you should have all files needed to start debricking.
entering diags mode and using a RUNME.sh file to fix the problem.
N.B Check the last page for some more images!
N.B It should be totally clear that:
- main kernel version MUST MATCH main partition version
- diags kernel version MUST MATCH diags partition version
- main partition doesnt necessary have the same version of diags partition
http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe -
BOOT IN FASTBOOT MODE
1) Unzip KindleSelectBoot.zip
2) Plug your bricked Kindle into USB port
3) Press and keep pressed the power switch until LED turns off, then press the
home button (while power switch is still pressed) and finally release the
power switch
4) You should now see Kindle detected as a USB/HID Device
-
5) Run MfgTool.exe in KindleSelectBoot folder
6) In MfgTool, press Scan Devices: you should see HID-compliant device. Select
now Kindle fastboot from profile menu e press Start