8/10/2019 Guide Screen Replacement acer iconia a500

1/9

Acer Iconia Tab A500 Screen

Replacement

Dropped your tablet and cracked the screen? Maybe it just isn't working. Check out this

guide to help you repair it.

Escrito por: Kyle L

INTRODUCCIN

This guide will provide step by step instructions on how to replace the screen on an Acer

Iconia Tab A500.

HERRAMIENTAS:

54 Bit Driver Kit (1)

1.5 mm Flathead Screwdriver

Spudger (1)

Phillips #1 Screwdriver (1)

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 1 of

http://www.ifixit.com/Tools/Phillips-1-Screwdriver/IF145-021-3http://www.ifixit.com/Tools/Spudger/IF145-002http://www.ifixit.com/Tools/54-Bit-Driver-Kit/IF145-022

8/10/2019 Guide Screen Replacement acer iconia a500

2/9

Paso 1 Back Case

To start, gently separate one

corner of the case using the black

spudger.

Paso 2

Once you have successfully pried

the spudger in between the front

case and back case, continue do

so around the entire tablet until the

back case is completely

disconnected.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 2 of

8/10/2019 Guide Screen Replacement acer iconia a500

3/9

Paso 3 Battery

Remove the 5mm screws that are

securing the battery to the rest of

the tablet.

Use the Phillips #00 Screwdriver

to remove the 5mm screws.

Paso 4

Use the sharper end of the spudger

to disconnect the battery from the

mother board.

The battery connector will slide

off.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 3 of

8/10/2019 Guide Screen Replacement acer iconia a500

4/9

Paso 5 Speakers

Locate the 4 screws and cable that

hold in the two speakers.

Use the Phillips #1 screwdriver

to remove these 2mm black

screws.

Remove the 2mm silver screws.

Not all 4 screws are

going to be the same

kind. This will not affect the

speaker replacement.

Connector Cable

Paso 6

Carefully remove the connector

cable by pushing on the rim of

black plastic insert.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 4 of

8/10/2019 Guide Screen Replacement acer iconia a500

5/9

Paso 7

Unfortunately, the top speaker is a

wedged under the motherboard.

To get this speaker out, use the

spudger and gently pry it out.

Paso 8 Power Button

Using the Phillips #1 screwdriver,

remove the screws near the edges

of the tablet.

They may be different

sizes, the silver are 5mm

and the black are 2mm.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 5 of

8/10/2019 Guide Screen Replacement acer iconia a500

6/9

Paso 9

Lift up on the black flaps to release

the flat cables.

Pull this Connector off.

Paso 10

Use the spudger to detach the

indicated cables.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 6 of

8/10/2019 Guide Screen Replacement acer iconia a500

7/9

Paso 11

Disconnect the two gold

connectors by pulling straight up on

them with your fingers.

Like before, lift up on the black flap

to detach the cable.

Paso 12

Having disconnected all those

pesky cables, the motherboard lifts

cleanly out.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 7 of

8/10/2019 Guide Screen Replacement acer iconia a500

8/9

Paso 13 Screen

Remove this components near the

edge of the tablet by unscrewing

the 5mm screw holding the top in

place.

Paso 14

Lift the silver case, exposing the

back side of the screen.

Acer Iconia Tab A500 Screen Replacement

iFixit CC BY-NC-SA www.iFixit.com Page 8 of

8/10/2019 Guide Screen Replacement acer iconia a500

9/9

To reassemble your device, follow these instructions in reverse order.

La version mas reciente de este documento fue generada en 2014-12-12 01:08:40 PM .

Paso 15

Use the spudger to pry off the

screen, it is held in by a film of glue

around the rim.

Paso 16

Swap the screen and you're

finished!

Acer Iconia Tab A500 Screen Replacement