GTM 3rd SCALE FOKKER Dr1 Triplane kit - flygtm.com · 3rd scale Fokker Dr1 Triplane kit This model...
Transcript of GTM 3rd SCALE FOKKER Dr1 Triplane kit - flygtm.com · 3rd scale Fokker Dr1 Triplane kit This model...
3rd scale Fokker Dr1 Triplane kit
This model is rich in detail and scale fidelity; from box spars to the scale hinges this kit will offer the builder a
lot of enjoyment and satisfaction. Over 1500 parts are marked and carefully packed to ensure easy
identification and safe shipping. The detailed plans call out each part number and include essential details
depicting the part assembly. The kit is not a complicated build. The photo instructions ensure easy
understanding and related information for builders at all different levels. The instructions are in PDF format
which can be downloaded from our website. The most recognized WW1 aircraft this subject’s history and vast
paint schemes make the Dr1 a marvelous WW1 selection. The Dr1 assembles and dis-assembles easily. The
two top wings can be removed together, the bottom wing drops down and the remaining components will travel
well in all different size vehicles; which makes this model field assembly a joy. The Dr1 is a very good flying
machine with the expect ground handling characteristics. This kit builds light (<40lbs) which results in better
flying and ground handling. You will notice that the kit has maintained the original outlines and building
techniques, such as, the box spar, bungee systems, metal hoods, scale hinges and functional cowling. You
can choose to build the fuselage with dowels or square sticks. The prototype successfully used dowels which
recreates the metal tubing look quite effectively. Email and phone support will help answer any questions you
might have as you build your Dr1 model. As you any GTM product spare parts are available.
Options – dowels or sticks for fuselage price - $1685.00 plus shipping
Kit includes –
Ziroli Oberursel UR2 100hp dummy engine kit
William Brother’s German wheels (1/2-inch bushings)
3D printed Spandau gun kits
Full cockpit components (mini-kits)
2 sets of CAD plans (one set for building, smaller set for reference)
Builder’s fuselage choice – dowels or square sticks
Two-piece aluminum cowl with cable groove (functioning)
Aluminum, brass and steel hardware fittings
Laser cut parts – ribs, spar webbing, saw-tooth plywood, etc.
All related hardware (screws, nut/bolts, j-bolts, turnbuckles)
Instruction manual with photos (PDF online)
Bill of materials
All parts identified and /or packaged in numbered zip lock bags
Metal hoods
½-inch (50.8mm) axle tube
Functioning metal belly pan and shroud
Formed landing gear aluminum struts
Aluminum cabane and stabilizer struts
Bungee landing gear and tail skid support
Ammo box mini kit
Pilot seat with working harness
Fokker fasteners (single handle wing nuts)
G10 control horns
Scale metal hinge straps
Carbon fiber elevator / rudder post tubes
Laminated rudder and elevator outlines
Metal shoe fittings with rivets (wooden interplane struts)
Over 1500 parts and other features