GTI ShaftLaser Alignment · • Both horizontal and vertical coupling and foot ... via email in a...
Transcript of GTI ShaftLaser Alignment · • Both horizontal and vertical coupling and foot ... via email in a...
www.gtipredictive.com Call 603.669.5993
• 3 steps to alignment • Enter dimensions, rotate shafts and display
measurement result. • Active Clock measurement
• During shaft rotation, measurements are automatically taken at 3 sensor positions. A shaft rotation of only as little as 70° is required. The activated electronic inclinometer eliminates possible user error for intelligent and precise alignment.
• Result and Live Move • Both horizontal and vertical coupling and foot
results are automatically calculated and displayed. The graphics show the machine position and the arrows the necessary feet corrections. During Live Move, GTI@lign monitors the horizontal changes live on the screen, continuously updating the adjustments.
• Reporting • Measurement results can be immediately shared
via email in a clear single-page graphical report to facilitate and shorten the alignment cycle time.
Highlight Features:
Dead simple laser shaft alignment with an easy to use guided experience.
GTI@lign is a laser based shaft alignment system utilizing a groundbreaking single laser beam. The system was developed with ease of use and accuracy in mind.
Our system offers the user a minimal startup time, a large and clear display, with access to email, the camera and other iPad features that make this alignment system unique in the marketplace. This iPad based system is one of the most accurate, reliable and easy to use products available.
Overview:
GTI ShaftLaser Alignment
Austin TXTest machineDavidApr 18, 2016
Testing report
Dimensions34.000
17.000 45.000 44.000
1800
Ø 10 inch inch
RPM
Photo
Results as found-0.7-5.9
1.78.8
-2.6 0.7 1.1 -6.4
Results as left-0.7-5.9
1.78.8
-2.6 0.7 1.1 -6.4
Apr 18, 2016, David
www.gtipredictive.com Call 603.669.5993
TransducerMeasurement principle Coaxial, reflected laser
Environmental protection
IP 67 (submersible, dustproof)
Ambient light protection Optical and active electronic digital compensation
Storage Temperature -20°C to 80°C
Dimensions 107 x 70 x 49 mm
LaserType Semiconductor laser diode
Wavelength 675 nm (red, visible)
Safety class Class 2, IEC 60825-1:2007
Beam power < 1 mW
Detector Resolution: 1 µm; Accuracy (avg): > 98%
Inclinometer Measurement range: 0° to 360°; Resolution: < 0,1°
CE conformity EC guidelines for electric devices (73/23/EEC) and those relating to electromagnetic compatibility (2004/108/EC) are fulfilled
GTI Predictive Technologies has partnered and created tools to transform the iPad into a powerful predictive maintenance tool. Users can now perform vibration analysis, dynamic balancing, thermography, and alignment with GTI’s powerful platform.
Learn more at www.gtipredictive.com
GTI ShaftLaser is manufactured by PRUFTECHNIK and distributed by GTI Predictive Technology, Inc.
Bluetooth® moduleClass 1 connectivity, transmitting power
100 mW
Transmission distance Up to 30m direct line of sight
Compliance FCC rules part 15.247
LED indicators 1 LED for wireless communication, 3 LEDs for battery status
Power supply Batteries 2 x 1.5 V IEC LR6 (“AA“)
Operating time 17 hours typical use (based upon an operating cycle of 50% measurement, 50% standby)
Environmental protection
IP 65 (dustproof and water spray resistant), shockproof
Dimensions Approx. 81 x 41 x 34 mm
Weight Approx. 133 g [4.7 oz.] including batteries and cable
Device
Apple Compatible with iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPod touch (5th generation), iPad 2, iPad (3rd & 4th generation), iPad Air, iPad Air 2, iPad mini (1st generation), iPad mini 2, iPad mini 3
Technical Data