GTA Network Management Systems

61
GTA Network Management Systems On Behalf Of BellSouth

description

GTA Network Management Systems. On Behalf Of Bell South. Navigation. Moving through these lessons is accomplished with the left mouse button and the keyboard cursor arrows. Take all the time you like to read or study images, and advance to the next page whenever you are ready. - PowerPoint PPT Presentation

Transcript of GTA Network Management Systems

Page 1: GTA Network Management Systems

GTA Network Management Systems

On Behalf OfBellSouth

Page 2: GTA Network Management Systems

2

Navigation

Moving through these lessons is accomplished with the left mouse button and the keyboard cursor arrows.

Take all the time you like to read or study images, and advance to the next page whenever you are ready.

Whenever the blue mouse is visible in the bottom right corner, you may click your mouse button to advance.

You may also use the keyboard left cursor arrow Q to back up to review any previous information or to restart a page.

ZQYR

Click your mouse to go to the next page

Page 3: GTA Network Management Systems

3

Introduction

The Customer Network Management Portal (CNMP or Portal) is a web

application that gives the agency detailed information on the status of the

network for IP services customers.

The Portal controls access to:

Netcool – Reports on network outage events

InfoVista – Tracks network performance

CTTS – Customer Trouble Ticketing System

This training will provide instruction on how to use each application:• CNM Portal• Netcool• InfoVista• CTTS

Page 4: GTA Network Management Systems

4

CNM Portal Management

Portal management will be administered by the GTA Network Management Team, including:

• Establishing new users

• Resolving user issues

• Changing user entitlements (these define permissions)

•For a new portal ID, email [email protected] or [email protected]

•To report trouble, call the Command Center at (404) 656-7378.

Page 5: GTA Network Management Systems

5

CNM Portal ViewEverything within the Portal will be determined by your user ID.

When you log in to the portal, your user ID will define… Which GTA Region or Agency levels you should be able to see What devices you may poll to determine status Which devices and routes you may query to measure response times What tickets you may open to read updates

Page 6: GTA Network Management Systems

6

CNM Portal User EntitlementsLevels of views are dependent on permissions:

• TCC / NOSC users will be able to monitor devices down through all levels

• GTA Regional Operations will be able to see all levels within their geographic area

• Agency users will be able to see within their agency and sub-agencies statewide

• Sub-Agency users will be able to see only within their sub-agency

Sub-Agency

Agency

GTA RegionalOps

TCC / NOSC

Agencies will be able to see within their agency regardless of GTA Region, and retain visibility into their sub-agencies regardless of GTA Region.

Page 7: GTA Network Management Systems

7

CNM Portal Interface

To access the CNM Portal, open an internet browser and go to https://cnmp.bellsouth.net/portal/

Enter a User ID and Password, then click Login

The portal will open and display a tabbed interface…

At any time, click homehome to get back to this page

Click logoutlogout when finished – before closing the browser

dfcsuser

and a list of functions that are currently accessible

Page 8: GTA Network Management Systems

8

CNM Portal Interface

The CNM Portal consists of a single sign-on point, and controls access to other applications and functions: User Management – Modify Personal Information Netcool – Alert Management System InfoVista – Performance Monitoring Tool CTTS – Customer Trouble Ticketing System

Other tabs and functions are either assigned to the Administrator, or not yet available.

Page 9: GTA Network Management Systems

9

Modify Personal Information

To modify your personal information, select User Management, and then select Modify Personal Information

Select Modify to save the changes

User ID Properties – cannot be modified

Change Password – enter old & new password

Personal Information – change if needed

Page 10: GTA Network Management Systems

10

Each device needs a unique name to identify it on the networkThe device name will start with GTA as the first three letters

Site (003)

We will examine GTAGDOC1003 and see how the name is derived

Agency (GDOC)GTA Region (1)

The last three numbers indicate the specific Device (003)

Naming Convention

The next four letters are derived from the Agency name

The next single number indicates the GTA Region

State Level (GTA)

The number after the site location 003, indicates the number of routes or devices at that location.

That means that 003 (2) has 2 managed routes or devices at that location that we will be able to monitor using the CNMP applications.

GTAGDOC

1003

GTAGDOC1003So it will work like this:

Page 11: GTA Network Management Systems

11

CNM Portal Summary

Each of the Portal selections covered here will launch an application in the same window, below the Portal interface tabs. At any time, you may make another selection from the Portal to change applications, or logout of the Portal when you are finished.

Page 12: GTA Network Management Systems

12

Netcool Introduction

Netcool is a network outage event application that operates within the CNM Portal. Netcool gives the agency real-time information on the status of the network for IP services customers with color-coding for quick at-a-glance network diagnostics.

Page 13: GTA Network Management Systems

13

Level of view within Netcool is dependent on the Portal username:

GTA Management and NOSC personnel will see the highest levels of the MPLS network, and can drill all the way down

GTA Regional operations will see all alerts within their GTA Region

Agencies will see all alerts within their agency

Sub-Agencies will see all alerts within their sub-agency

Netcool Access Levels

Page 14: GTA Network Management Systems

14

Netcool

To access Netcool from the CNM Portal, click on the Network Management tab and select View Fault Events.

The Netcool interface is displayed.

Page 15: GTA Network Management Systems

15

All Netcool alarm events are color coded by severity, and categorized by status.

The severity color indicates the importance or urgency of the event, and the status indicates whether the event has been acknowledged.

Green – Clear event. No active alarms.Purple – Indeterminate – An event that has been resolved. This usually occurs when a problem has been resolved or cleared and the node or interface is still returning to normal.

Red – Critical alarm - Service impacting alarm.Examples:Node down (NMS lost network connectivity to device)Node unreachable (NMS lost route to device)Network unreachable (NMS lost route to network)

Light Blue – WarningExamples:CPU back to normal (CPU < 60% busy)Interface error returned to normal (< 3 error rate)Memory returned to normal (> 20% available memory)SNMP agent up (NMS can query device)Node up (connectivity restored to device)Buffer is back to normal (alarm automatically clears after 4 hour waiting period)

Orange – Major alarm - Service impacting alarm.Examples:CPU alarm (CPU >= 85% busy)Interface error alarm (> 5% interface error rate)Memory alarm (10 % available memory)Link down alarm (interface lost carrier or LMI)

Before we get too far into Netcool, let’s look at the alarm colors and meanings that will be displayed in the Netcool console.

Yellow – Minor alarm - Non-service impacting alarmsExamples:CPU alarm (CPU >= 60% <= 84% busy)Interface error alarm (3% - 5% interface error rate)Memory alarm (>= 10% <= 20% available memory)SNMP agent down alarm (String; nms can not query device)Buffer failure alarm (buffer failures have occurred on device)

Netcool Alarm Indicators

Page 16: GTA Network Management Systems

16

Netcool Interface

It is important to understand that the main Netcool screen is presenting the same event information in four different ways: 1. Network Status 2. Alarm Summary 3. GTA Region Status 4. Agency StatusBy looking closer at each of these four sections, we can determine just what each section represents.

Page 17: GTA Network Management Systems

17

1. Network Status

Network Status displays the total number of all alarm events, along with the color of the most serious current alarm event. This means that there are 52 total events of different severities, and the most severe is a Critical (red) event.

Page 18: GTA Network Management Systems

18

Event Details ListClick the All Events icon to open a detailed description of all 52 events, sorted from most serious to least serious. Scroll down for details on the lesser alarms not visible.

Page 19: GTA Network Management Systems

19

Alarm Event Details

There are 9 fields in the information displayed once an object has been selected:1. Event ID- a system generated unique identifier number

2. Remedy Ticket - The Remedy ticket number, once it is assigned (BellSouth ticketing system)

3. Node - The device name for the affected route or device

4. City – The city in which the device is located

5. ACK – Indicates whether the alarm has been acknowledged.

6. Summary – A brief summary of the alarm

7. First Occurrence – A Date/Time stamp of the alarm, indicating the time/date when the device first went into alarm

8. Count – The number of times a device has alarmed since the initial alarm

9. Last Occurrence - Date/Time stamp of the last time the system indicated an alarm

1 2 3 4 5 6 7 8 9

Page 20: GTA Network Management Systems

20

2. Alarm Summary

Of the 52 alarms listed in All Events, the Alarm Summary section displays only the events that fit into these parameters:

CriticalCritical An outage affecting more than one siteAn outage affecting more than one site

MajorMajor Outage at an individual siteOutage at an individual site

Last 30 MinsLast 30 Mins Events in the last 30 minutesEvents in the last 30 minutes

Count > 5Count > 5 Error rate greater than 5% on a given interfaceError rate greater than 5% on a given interface

MinorMinor Any error that does not cause an outageAny error that does not cause an outage

Click any of the alarm icons listed in Alarm Summary to open a list with the details for those alarm events.

Page 21: GTA Network Management Systems

21

Compare the orange Athens icon to the alarm color codes, and we’ll see that the most serious alarm in that GTA Region is a Major alarm. If we compare the red Rome icon to the alarm color codes, we’ll see that the most serious alarm in that GTA Region is a Critical alarm. Each Region icon color corresponds to the most serious alarm within that GTA Region. Remember the alarm color codes?

3. GTA Region Status

Click any of the GTA Region alarm icons to open a list with the details for those alarm events in that GTA Region.This is the list generated by clicking the Rome icon.

Page 22: GTA Network Management Systems

22

Similar to the GTA Region status, the Agency icons represent the highest status of alarm events within each Agency, regardless of GTA Region. Since they have red icons, DHR and DLAW both have Critical events as the highest alarm.With yellow icons, DOC & DTAE both have Minor events as the highest alarm.DMVS has Indeterminate as the highest level alarm.DJJ, DNR, and CSB are clear, with green icons indicating no current alarms.

Click any of the Agency alarm icons to open a list with the details for those alarm events in that Agency.This is the resulting list generated for DLAW, with most serious events listed first.

4. Agency Status

Page 23: GTA Network Management Systems

23

The Netcool main screen we have been working with is from a GTA perspective- all agencies and all GTA Regions are visible.An Agency or GTA Region view will look similar but will show fewer results belonging only to that Agency or GTA Region.

The 4 GTA Region purple icons are regions where DOC has offices with active alarms, so the agency has visibility into those GTA Regions, but only as it pertains to DOC.

Here is a GDOC Netcool screen. All Events has only 5 total alarms, and the most serious is indeterminate. We know that because the All Events icon is purple.

Level of view within Netcool is dependent on the login username: GTA Management and NOSC personnel will see the highest levels of the MPLS network, and can drill all the way down GTA Region operations will only see alerts within their GTA Region Agencies will only see alerts within their agency Sub-Agencies will only see alerts within their sub-agency

The DOC agency icon is purple, and all others are green. This doesn’t mean that all other agencies have no alarms – it means they are masked, and will not show any results with a GDOC user ID.

Netcool GTA Region or Agency View

The Alb, Athens, Atl_Cen, Atl_N, Aug, and Mil icons are all green, which tells us there are no alarm events for the GDOC offices within those GTA Regions.

Page 24: GTA Network Management Systems

24

Netcool SummaryNetcool is a fault management tool. It is important to remember that Netcool doesn’t measure performance; it only indicates the presence or absence of traffic from network devices and routes.

Similar to a ping command, as long as traffic is returned, it can be demonstrated that the network devices and routes are still intact and functioning.

When the traffic is not returned for a device or route, Netcool displays an alert to indicate that lack of a returned message. So if you receive a call reporting that the network is down, Netcool is your first verification tool in diagnosing the issues at hand.

To measure metrics indicating network performance or slow-downs, and to compare performance for select dates, select the InfoVista application within the CNM Portal.

Page 25: GTA Network Management Systems

25

Latency – The time delay for a packet of data to get from one point to another point

Packet Loss – The percentage of packets sent that will be lost (out of 100%) in transmission

Jitter –the variation in the time between packets arriving – critical in VoIP applications, but less important for email, data, etc.

Latency is typically expressed in milliseconds, or ms, and measures the transmission time to travel to the destination and return.

Contributors to latency include the transmission medium (wire, fiber, etc.), packet size, hardware involved, and other variables.Packet loss may be an indication of network congestion or other factors.

Jitter is frequently caused by packet transmission delays.

P I N GP I N G

time=72 ms

InfoVista and Internet Metrics

Latency shown here is 72 ms

Page 26: GTA Network Management Systems

26

To access InfoVista from the CNM Portal, click on the network management tab and select View Performance Reports.

InfoVista Interface

InfoVista will launch just below the Portal interface tabs.

Page 27: GTA Network Management Systems

27

CPE Top & Bottom tab – Top & bottom 10 CPE devices rated by CPU usage and loadAccess tab – Metrics displaying latency, jitter, and packet loss for access lines and routes Access Top & Bottom tab – Top & bottom 10 access routes rated by latencyMain page tab – Starting point for InfoVistaCPE tab – Metrics for CPE devices displaying CPU & memory usage on the CPE, WAN Interface metrics, and Frame Relay metrics

InfoVista Tabs

The InfoVista tabs allow access to device metrics and reports

Page 28: GTA Network Management Systems

28

Both the CPE tab and the Access tab contain the Time Navigator. The final reports and graphs also contain Time Navigator functionality.The Time Navigator designates the date for any generated reports. It also specifies the time period length for the report.

InfoVista Time NavigatorIn addition to the 5 tabs available, you’ll need to know about the Time Navigator and the Device Navigator to locate the correct information.

Page 29: GTA Network Management Systems

29

The time period may be directly entered into this field using the keyboard, or it may be changed with the navigation arrows to move it forward or back in one day intervals, or a new date may be selected using the calendar function.

Once set, any generated report will contain data for this time period until the time navigator is reset or modified again.

The GO button is used to generate the report after entering a date directly into the field via keyboard.If the time period is altered using the navigation arrows or the calendar function, InfoVista will begin to create the report when the new date is selected.

The time period menu selects the time period for a report – whether it will cover a day, a month, or a year.

As the time period menu is selected, the time period on the left will change to reflect the new time increment.

The calendar function is convenient for adjusting the reporting period by larger amounts.

Click the calendar icon, use the left & right arrows at the top to display the desired month, and then click on the desired date to generate the report.

The navigation arrows will increase or decrease the time period by the time period displayed in the time period menu.

If the time period menu is set to Daily, each arrow click will change the date by one day.

If the time period menu is set to Monthly, each arrow click will change that date by one month.

Each arrow click will ALSO refresh the display if a graph has already been generated, slowing the application considerably while waiting to reload it.

InfoVista Time Navigator

1. Navigation arrows

2. Time period (specified for report)

3. Calendar icon

4. Time period menu

5. GO button

The purpose of the Time Navigator is to specify the date and time period prior to generating a performance report.

The report date and time are specified using these controls:

Page 30: GTA Network Management Systems

30

The default time period is Daily.

The date field to the left displays the date, and allows the date to be entered or altered.

If we click the time period menu and change it to Weekly, the date field on the left will change to allow selection by weeks.

As the time period is selected on the right side, the time period field on the left side will change to match that time increment.

By selecting Monthly, InfoVista will change the left field again to allow for monthly choices.

The same with Quarterly and Yearly selections, or all the way back down to Hourly if needed.

Within the Time Navigator, some fields will change as you make your selections.

InfoVista Time Navigator

Let’s look through the time period options, and watch the time/date field on the left side as it changes.Whether we want to look at performance metrics for yesterday, last week, or last month, the Time Navigator is the first stop to select the date for reporting metrics.

Page 31: GTA Network Management Systems

31

Both the CPE tab and the Access tab contain the Device Navigator.

InfoVista Device NavigatorJust as the Time Navigator selects the time period to examine metrics or create a report, the Device Navigator selects the target device or access route for any generated performance reports.

Page 32: GTA Network Management Systems

32

Select the symbol to view devices below.

Select the next symbol to view additional devices.

InfoVista Device NavigatorRemember the naming convention example in the portal section?That example was taken right out of InfoVista. If you’re familiar with Windows Explorer, you’ll notice that the Device Navigator is similar.Just like in Windows Explorer, use the tree on the left pane to navigate or drill down to the desired location or device.

…and select the desired target device.

Page 33: GTA Network Management Systems

33

Right-click on a listing below and a small menu will pop up. Click on any selection to generate performance reports:1. Shows a list of frequently used daily and weekly reports2. Shows WAN Interface metrics specific to this device3. Shows Frame Relay metrics specific to this device4. Shows Router performance metrics specific to this device5. Updates all visible panes to display metrics for the selected device

Let’s look closely at GTAGDOC1001. The target site location 001 shows a (4) after it. This indicates that 4 devices or interfaces are at that location.Click on 001 (4) and you can see a list showing those device or interface names. The first device is always the CPE router. It is followed by an ATM interface, and 2 virtual access lines.

InfoVista Device NavigatorIf you right-click on the CPE device as we did here, you will not get any results for WAN Interface or Frame Relay reports. That’s because this is not a WAN Interface or Frame Relay device. To get meaningful results, you must first select a device that matches the report type for the metrics you want.

Page 34: GTA Network Management Systems

34

The CPE tab displays Router Performance metrics, WAN Interface metrics, and Frame Relay metrics.

InfoVista CPE tabThe CPE tab is the starting place for diagnosing any performance-related issues with CPE devices.

Page 35: GTA Network Management Systems

35

Click on any device name for more detailed information on that CPE. We’ll select GTAGDOC2005.

The report is generated, and it shows hourly CPU and memory usage over a 1 day period.

Other quick reports are available by clicking the arrow next to the CPU usage numbers.

We’ll look more into understanding reports later, but this covers the very basics of generating a performance report on a CPE device.

The default Router Performance Report pane displays the top 10 CPE devices measured by CPU usage.

We’ve already looked at the tabs, the time navigator, the device navigator and each of their functions.

Let’s remove all of those so we can get a better look at each of the CPE panes containing devices and metrics.

The CPE tab page contains several types of information. By breaking it into sections, we can examine each part of it separately.

We’ll explore each pane individually-

1. Router Performance Report2. WAN Interface Report 3. Frame Relay Report

InfoVista CPE – Router Performance Report

Memory usage is also displayed. These two metrics provide a snapshot of the daily CPE traffic load.

Page 36: GTA Network Management Systems

36

Availability: The percentage of time that the WAN interface is available In Avg: The average amount of incoming traffic in Megabytes per second In Peak: The highest amount of incoming traffic in Megabytes per second Out Avg: The average amount of outgoing traffic in Megabytes per second Out Peak: The highest amount of outgoing traffic in Megabytes per second In Avg Load: Average amount of incoming traffic on the selected circuit Out Avg Load: Average amount of outgoing traffic on the selected circuit Out Peak Load: Peak amount of outgoing traffic on the selected circuit In Peak Load: Peak amount of incoming traffic on the selected circuit

The WAN Interface Report lists metrics on each interface, including:

InfoVista CPE tab – WAN Interface Report

1. Router Performance Report2. WAN Interface Report 3. Frame Relay Report

IN PEAK is the highest amount of traffic on this interface. This is important if you’re experiencing congestion or bogging down issues!

Page 37: GTA Network Management Systems

37

Or select any device to view a report displaying time and load percentage.

InfoVista CPE tab – WAN Interface Report

Click on the arrow near the Availability percentage to generate a report

Each graph displays time across the bottom and load percentage on the left side.

Page 38: GTA Network Management Systems

38

Frame Relay pane1. Router Performance Report2. WAN Interface Report 3. Frame Relay Report

The Frame Relay pane indicates a daily average for inbound and outbound traffic, measured in percent according to capacity.Click on any inbound or outbound percentage metric to generate a report.GTAGDOC8011 shows in inbound average of 22.132 percent for the day. The graph report indicates actual traffic from 12% to 47% for that day.

Page 39: GTA Network Management Systems

39

The CPU devices are rated on a daily average of CPU usage measured in percent.The CPE Top & Bottom tab displays a quick reference listing of the top and bottom 10 CPE devices rated by CPU and memory usage.

tabCPE

Top 10 devices by CPU usage

Bottom 10 devices by

CPU usage

CPE Top & Bottom

Daily CPU usage in

percentage

Daily Memory usage in

percentage

Page 40: GTA Network Management Systems

40

Similar to the CPE tab, select any device to see more details on usage metrics for that device.

CPE Top & Bottom tab

t i m e i n h o u r s

CPU

usage in percent

The reporting period may be modified as desired using the time navigator along the top.

Metrics are displayed for that device showing CPU and memory utilization.

This is an hourly graph, but it can be modified to display daily or longer time periods.

Page 41: GTA Network Management Systems

41

CPE Top & BottomAccess tabThe Access tab contains metrics displaying latency, jitter, and packet loss for access lines and routes.

The BE annotation after the site name indicates the Class of Service (CoS) level. BE is Best Effort.

CoS categories include: • BE – Best Effort• PB – Priority Business• IA – Interactive• RT – Real Time

Page 42: GTA Network Management Systems

42

Access tab

The right pane, Availability Report, displays the same routes that are shown below the Device Navigator, along with additional information:• Latency• Packet Loss• Jitter

Navigating the Access Reports page is very similar to the CPE Reports page, with the Time Navigator and the Device Navigator.

Page 43: GTA Network Management Systems

43

Detailed report data is also accessible by right-clicking any route within the Device Navigator. This will open a menu with the following selections:• Show Instant Reports• Performance Metrics• Synchronize All

populates the right pane with metrics for the selected device

will open this window, and clicking any selection will generate an instant report displaying jitter metrics for the selected time period as listed.will update the data to the newest available for the time period chosen.

Access tab

Page 44: GTA Network Management Systems

44

Access tab – Show Instant Reports

Double-click on any report line to generate a graphic displayThe performance graph will be generated for the selected device, similar to the instant reports in the CPE tab.

Page 45: GTA Network Management Systems

45

The Access Top & Bottom tab contains a quick reference listing of the top 10 and bottom 10 access routes rated by latency.

AccessAccess Top & Bottom

Page 46: GTA Network Management Systems

46

This list displays the top 10 Access lines for usage during the time period shown.

This list displays the bottom 10 Access lines for usage (average) in the time shown.

This list displays Availability during the same time period.

This lists Packet Delivery (average) for the same time period shown above.

This lists the Latency (average) for the same time period shown above.

This list displays Packet Delivery during the same time period.

This list displays Availability during the same time period.

This lists the Latency (average) for the same time period shown above.

Access Top & Bottom tabSimilar to the ACCESS tab, you may select either the device name or the metric value to generate a graphic report.

Page 47: GTA Network Management Systems

47

At the top of the report, there is a modified version of the Time Navigator.

Once a report has been generated, you can modify the time period or report date forward or back to view adjacent dates and view performance metrics without closing the window and then starting over.

We have the same navigation arrows, calendar, and GO button as the Time Navigator. There is also an additional field that defines the time span of the report- whether it covers a day, week, or longer.

The timeline on this report is set to begin at noon and display 1 day of data.

You can set the start date and time, set the duration, and then view a report on any time period for which data is available.

If we examine the router performance report to the right, CPU usage is being measured. The highest value on the scale displayed along the left side is 36. That indicates 36%, although the highest CPU spike actually reached only 32%. InfoVista resizes the scale to fit the data.If the CPU were to suddenly spike again and rise to 65%, the next time this data is polled, InfoVista would resize the graph so the new spike would fit. The left side would be renumbered so it would reach 70% at the top, and all the data would still fit within the graph.The graph will auto-adjust to fit the lowest and highest values.

InfoVista reports span a period of time that is indicated across the bottom of the graph. Whether it measures hours, days, or weeks, older time is on the left side, with more recent events on the right side.

InfoVista reports may have differing appearances based upon several factors. Regardless of how they appear, reports will all have a few things in common.

InfoVista Metrics & Reports32%

65%

Page 48: GTA Network Management Systems

48

Interpreting Results

As the time period and the duration are modified, any new reports that are generated will display performance metrics for that new timeline.

Here we can see reports with the timelines set to

• Hourly, covering a 1 day period

• Daily, covering a 1 week period

• Weekly, covering a 2 month period

This allows report time periods to be customized, showing hour-by-hour performance peaks, or weeks and even months at a time to see larger trends that would not be obvious while viewing hourly or daily metrics.

Page 49: GTA Network Management Systems

49

The controls across the top of the graphic report include report date… in addition to:

• Formats

• Explain

• Latest Refreshes the data to display the newest report data available.

Allows the data to be displayed (and then saved) in several formats.

10Use This Report

Generates a small window to explain the data and values displayed in each graph.

Page 50: GTA Network Management Systems

50

Save This ReportReports are a visual medium, and must be versatile to in order to be useful, whether to be emailed, printed, archived, or posted online.

Click the Formats button at the top left corner of a report and select the desired file type. The report will be generated in a new window.

The Formats button allows the report to be saved in several formats including:

• PDF filePDF file

• Plain text filePlain text file

• Excel spreadsheetExcel spreadsheet

• XML code for a web pageXML code for a web page

Save the new file as you would any other file, and then email, print, post to a webpage, or archive on a network drive.

Page 51: GTA Network Management Systems

51

InfoVista SummaryAs a network performance monitoring tool, InfoVista can help to diagnose network traffic issues by displaying CPE router statistics and traffic in & out of a site experiencing lag or latency issues.

That information spans time periods from yearly, for understanding larger trends, all the way down to hourly, for examining data traffic in and out of a specific location or along a specific route.

A quick glance at InfoVista may be all you need to verify the congestion or latency issues that are being experienced.

Page 52: GTA Network Management Systems

52

CTTS (Customer Trouble Ticketing System)

CTTS (Customer Trouble Ticketing System) is a web interface application with the CNM Portal that allows access to trouble tickets within the trouble ticketing database to view information and updates.

This enables you to easily look into the ticketing system and check on the status of your ticket without having to call anyone.

You can also see exactly what is being done to resolve your issue and observe the details of testing and other diagnostics, rather than wondering what is being done to resolve your issue.

Page 53: GTA Network Management Systems

53

To access CTTS from the CNM Portal, click on the trouble management tab and select Trouble Ticket Console.

CTTS Interface

Page 54: GTA Network Management Systems

54

CTTS InterfaceBulletins - A list of current bulletins. Scroll down for more bulletins and click on the blue date/time to open & view bulletin details.Search Controls – Users may search trouble tickets or bulletins.

Note: The Submit Bulletin feature is disabled and non-functional.

Trouble Ticket Listing – A list of current trouble tickets. Scroll down for more tickets and click on the blue ticket number to open & view details.

Page 55: GTA Network Management Systems

55

CTTS SearchScroll down for more ticket numbers. If a ticket is not listed here, you may search for it.To search for a ticket, enter the ticket number into the Search on Ticket # field. Partial ticket numbers are okay. Click the Search button. The first ticket is opened and the list below contains any additional matches to your search. Select your ticket to open it and view the details.

32

Page 56: GTA Network Management Systems

56

Below Work Log, there is an Audit History link. The Audit History contains a listing of each field on the CTTS form that was changed, along with the date/time stamp that records when it was changed. When the ticket severity or status is changed, there will be entries for each of those in the Audit History showing previous value (if any) and new value – what it was changed to. Scroll down for more information.

Reading a CTTS TicketOnce ticket 0003332 is open, you can see that the problem summary states that GTAGDOC9009 is observed as down, and this ticket has been closed. To read additional details and history, click on the Work Log link. The Work Log contains a listing of everything entered into Detail Description, and details of exactly what was done, along with date/time stamps and user ID of the person that entered the information. The time and user ID are shown here. Scroll down for more work log entries.

Page 57: GTA Network Management Systems

57

The BellSouth tab contains tracking and routing information specific to BellSouth.The Notifications tab contains information regarding paging escalations and notifications.

There are other tabs and fields that contain additional information and details about the affected device, but the majority of the information will be found in Work Log. The Equipment tab displays information specific to the device and location addressed in the ticket. It also specifies the physical location of the site.

Reading a CTTS Ticket

Ticket Number is automatically assignedStatus - New, Open, WIP, Delayed Maint, Dispatched, Monitored, Closed Severity - Major, Critical, Minor, or Informational Domain Code – BLS or GTA

Initiation Code – Initial cause

Trigger Code – How this ticket was triggered

Problem Summary – Limited to 255 characters

Detail Description – Unlimited length, read history in Work Log

Cancel Code – Reason for canceling the ticket

Root Cause – Affected end product

Page 58: GTA Network Management Systems

58

The ability to quickly gain access to The ability to quickly gain access to any ticket and determine the steps any ticket and determine the steps taken toward resolution will greatly taken toward resolution will greatly reduce the amount of time spent reduce the amount of time spent checking on outages and other checking on outages and other issues.issues.With CNM Portal access and CTTS, With CNM Portal access and CTTS, you can check on a problem ticket you can check on a problem ticket or a number of tickets to determine or a number of tickets to determine the status within moments, allowing the status within moments, allowing a more productive use of your time.a more productive use of your time.CTTS is your first stop in an outage. CTTS is your first stop in an outage. In many cases, you’ll find that the In many cases, you’ll find that the ticket has already been opened with ticket has already been opened with analysts working toward resolution. analysts working toward resolution.

CTTS Summary

Page 59: GTA Network Management Systems

59

Training Summary

The Customer Network Management Portal and the inclusive web applications are designed to give you network status alerts as well as greater access and insight into your network performance and ticketing system:

• CNM Portal – Single sign-on and security

• Netcool – Alerts for network outage events

• InfoVista – Performance management tool

• CTTS – Access to ticket details and information

With this new level of access, managing outages are a matter of logging in to the CNM Portal and observing Netcool status, verifying traffic volume within InfoVista, and then checking into CTTS – there may be a ticket already opened on it.

Page 60: GTA Network Management Systems

60

Contact Information

• For a new portal ID, email [email protected] or

[email protected]

• To report trouble, call the Command Center at (404) 656-7378.