Gstyle
-
Upload
imaad-rahaman -
Category
Documents
-
view
224 -
download
0
description
Transcript of Gstyle
Our profile
G Style is a leading manufacturer of stainless steel bathroom equipment.�The brand was established in 1968 and with all those years of business experience in the field has supplied its products to numerous prestigious constructions in Europe, M.� East, North Africa and Asia.� That includes over 3.�500 hotels, residential buildings, private houses, luxury cruise ships, hospitals and commercial complexes.�
Stainless steel is a material of absolute quality and durability.� It is the best solution even for marine environments, where protection against rust is vital.� This steel alloy containing chromium and nickel, has lifetime resistance against corrosion.�
This catalogue, contains equipment for the residential, commercial and public bathroom, made from the highest quality AISI 304 stainless steel.�
Discover the products you need and choose among the available series, the one that matches your style, and make a bathroom for a lifetime.�
Stainless steel equipment.� Living for your life
Our company’s policy is to continuously improve and develop its products.�Therefore, any photo, drawing or technical specification in this catalogue is indicative and maybe altered without any previous notice.�
Our products at a glance
BATHROOM ACCESSORIESCOLLECTIONPages 08-91
Pages 140-163WATER SCREENINGELEMENTS
Pages 182-191PUBLIC WASHROOMEQUIPMENT
Pages 164-181BATHROOM EQUIPMENT FOR THE DISABLED
Pages 92-139 MIRRORS COLLECTION
BATHROOM ACCESSORIESCOLLECTION
SQUAREPages 10-15
ELEGANCEPages 42-51
EXCELSIORPages 58-63
OVALPages 16-23
SWINGPages 52-57
KNOSSOSPages 24-41
UNIVERSALPages 72-91
POSEIDONPages 64-71
BATHROOM ACCESSORIESCOLLECTION
10
SQUARECubic perception
Modern design based on square lines and solid material.� Ideal for modern design environments.� Big variety of products that can meet all requirements.�
Available finishes: Bright
14.112-30 Inox Bright
14.111-30 Inox Bright
14.013-30 Inox Bright
Paper Holder With Cover
Paper holder with cover is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8mm diameter solid bar paper holder and 1.�0mm thick cover with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
14.112
Paper Holder Vertical
Vertical paper holder is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square and 2.�0mm thick paper holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
14.111
14.013Tumbler holder is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square tumbler holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.� Tumbler is crystal.�
Tumbler Holder
140[5 1/2"]
119[4 11/16"]
97[3
13/
16"]
50[1 15/16"]
80[3 1/8"]
148
[5 1
3/16
"]
124[4 7/8"]
95[3
3/4
"]10
0[3
15/
16"]
12
SQUAREPaper Holders / Tumbler - Toothbrush holders
14.007-30 Inox Bright
14.021-30 Inox Bright
Soap dish is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square and 1.�0mm thick soap dish with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Soap Dish
14.007
14.107-30 Inox Bright
Soap dish with holes is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square and 1.�0mm thick soap dish with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Soap Dish With Holes
14.107
14.021Soap and sponge holder is manufactured completely from AISI 304 stainless steel.� Brackets are 22x22 mm solid square and are joined with 8x8mm solid square and 4mm solid bars with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 20mm diameter solid bar and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Soap and Sponge Holder
13
Soap Dishes / Soap and Sponge Holders
145[5 11/16"]
22[7
/8"]
101
[4"]
145[5 11/16"]
22[7
/8"]
101
[4"]
308[12 1/8"]
36[1
7/1
6"]
140
[5 1
/2"]
14.318-30 Inox Bright
14.001-30 Inox Bright
Liquid soap dispenser is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square container holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.� Container is made from frosted crystal and has a metallic pump.�
Liquid Soap Dispenser With Crystal Container and Metallic Pump
14.318
14.010-30 Inox Bright
Robe Hook is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square hook with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Robe Hook Double
14.010
14.001Towel Ring is manufactured completely from AISI 304 stainless steel.� Bracket is 22x22 mm solid square and is joined with 8x8mm solid square towel ring with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 20mm diameter solid bar and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Towel Ring
124[4 7/8"]
165
[6 1
/2"]
100
[3 1
5/16
"]
125[4 15/16"]
30[1
3/1
6"]
71[2
3/4
"]
195[7 11/16"]
134
[5 1
/4"]
70[2
3/4
"]
14
SQUARELiquid Soap Dispensers / Hooks / Towel Rings
Single towel bar is manufactured completely from AISI 304 stainless steel.� Brackets are 22x22 mm solid square and are joined with 8x8mm solid square towel bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 20mm diameter solid bar and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Bowl Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Towel Bar Single Bowl Brush Cleaner
14.304 30cm
14.504 50cm
14.604 60cm
11.040
14.304-30 Inox Bright
14.504-30 Inox Bright
14.604-30 Inox Bright 11.040-30 Inox Bright
338[13 5/16"]
22[7
/8"]
70[2
3/4
"]
538[21 3/16"]
22[7
/8"]
70[2
3/4
"]
638[25 1/8"]
22[7
/8"]
70[2
3/4
"]
80[3 1/8"]
87[3 7/16"]
397
[15
5/8"
]
15
Towel Bars / Brushes
BATHROOM ACCESSORIESCOLLECTION
16
OVAL Oval shape
Simple design with straight lines and contour oval flanges.� A soft appearance ideal for any design environment.� Big variety of products that can meet all requirements.�
Available finishes: Bright
Double Robe Hook is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 14mm diameter solid bar hook with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Towel Ring is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 8mm diameter solid bar towel ring with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Robe Hook Double Towel Ring
15.010 15.001
15.010-30 Inox Bright 15.001-30 Inox Bright
76[3"]
50[1
15/
16"]
70[2
3/4
"]
170[6 11/16"]
141
[5 9
/16"
]70
[2 3
/4"]
OVALHooks / Towel Rings
18
Towel Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 16x21 mm solid bar oval shaped and are joined with 12mm diameter, 1mm thick tube towel bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Mounting bases are covered by 0.�8mm thick flange cover.�
Towel Shelf with Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 16x21 mm solid bar oval shaped and are joined with 10mm diameter, 1mm thick tube towel shelf and 8mm diameter solid bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Mounting bases are covered by 0.�8mm thick flange cover.�
Towel Bar Single Towel Shelf With Bar
15.304 30 cm
15.504 50 cm
15.604 60 cm
15.528 50 cm 15.628 60 cm
15.304-30 Inox Bright
15.504-30 Inox Bright
15.504-30 Inox Bright
15.528-30 Inox Bright
15.628-30 Inox Bright
333[13 1/8"]
50[1
15/
16"]
70[2
3/4
"]
533[21"]
50[1
15/
16"]
70[2
3/4
"]
633[24 15/16"]
50[1
15/
16"]
70[2
3/4
"]
533[21"]
110
[4 3
/8"]
226
[8 7
/8"]
633[24 15/16"]
110
[4 3
/8"]
226
[8 7
/8"]
Towel Bars / Towel Shelves
19
Soap Dish is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 10mm diameter solid bar and 1.�0mm thick soap dish with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Soap Dish with holes is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 10mm diameter solid bar and 1.�0mm thick soap dish with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Soap Dish Without Holes Soap Dish With Holes
15.007 15.107
15.007-30 Inox Bright 15.107-30 Inox Bright
20
OVALSoap Dishes
170[6 11/16"]
50[1
15/
16"]
100
[3 1
5/16
"]
170[6 11/16"]
50[1
15/
16"]
100
[3 1
5/16
"]
Soap and sponge holder is manufactured completely from AISI 304 stainless steel.� Brackets are 16x21 mm solid bar oval shaped and are joined with 6mm diameter solid bar and 1.�0mm thick soap and sponge holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Mounting bases are covered by 0.�8mm thick flange cover.�
Liquid soap dispenser is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 8mm diameter solid bar and 1.�5mm thick container holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.� Container is made from frosted crystal and has a metallic pump.�
Soap and Sponge Holder Liquid Soap Dispenser With Crystal Container and Metallic Pump15.02115.318
15.021-30 Inox Bright 15.318-30 Inox Bright
303[11 15/16"]
58[2
5/1
6"]
155
[6 1
/8"] 16
5[6
1/2
"]10
0[3
15/
16"]
122[4 13/16"]
21
Soap and Sponge Holders / Liquid Soap Dispensers
Bowl Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Bowl Brush Cleaner
11.040
11.040-30 Inox Bright
80[3 1/8"]
87[3 7/16"]
397
[15
5/8"
]
22
OVALBrushes / Tumbler - Toothbrush Holders
Tumbler Holder is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 8mm diameter solid bar and 1.�5mm thick tumbler holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.� Tumbler is crystal.�
Tumbler Holder
15.013
15.013-30 Inox Bright
97[3
13/
16"]
94[3
11/
16"]
122[4 13/16"]
Paper holder with cover is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 8mm diameter solid bar paper holder and 1.�0mm thick cover with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Paper Holder With Cover
15.112
15.112-30 Inox Bright
Vertical paper holder is manufactured completely from AISI 304 stainless steel.� Bracket is 16x21 mm solid bar oval shaped and is joined with 10mm diameter solid bar and 2.�0mm thick paper holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 12mm diameter solid bar with 3mm thick flange made of stainless steel and securely attach to wall with stainless steel screws and locks with bracket with stainless steel locking screw.� Mounting base is covered by 0.�8mm thick flange cover.�
Paper Holder Vertical
15.111
15.111-30 Inox Bright
64[2 1/2"]
82[3 1/4"]
164
[6 7
/16"
]
140[5 1/2"]
119[4 11/16"]
111
[4 3
/8"]
23
Paper Holders
24
BATHROOM ACCESSORIESCOLLECTION
KNOSSOS Contour figure
Simple design that matches all design environments.� The contour lines (no sharp edges) makes it safe and easy to clean and maintain.�
Available finishes: Bright, Satin
Towel Shelf with Towel Bar is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 1.�5mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Shelf and bar is 12mm tube, 1mm thick and is mechanically attached to frame.� Μounting flange is securely attached to wall with stainless steel screws.�
Towel Shelf With Bar
02.528 50 cm
02.628 60 cm
02.528-30 50 cm Inox Bright
02.528-00 50 cm Inox Satin
02.628-30 60 cm Inox Bright
02.628-00 60 cm Inox Satin
622[24 1/2"]
153
[6"]
274
[10
13/1
6"]
26
522[20 9/16"]
153
[6"]
274
[10
13/1
6"]
KNOSSOSTowel Shelves
04.528-30 50 cm Inox Bright
04.528-00 50 cm Inox Satin
04.628-30 60 cm Inox Bright
04.628-00 60 cm Inox Satin
Towel Shelf with Towel Bar is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Shelf and bar is 12mm tube, 1mm thick and is mechanically attached to frame.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Shelf With Bar
04.528 50 cm
04.628 60 cm
50 cm: 05.528-30 Inox Bright
50 cm: 05.528-00 Inox Satin
60 cm: 05.628-30 Inox Bright
60 cm: 05.628-00 Inox Satin
Towel Shelf with Towel Bar Ship model is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Shelf and bar is 12mm tube, 1mm thick, protective banister is 6mm solid round and is mechanically attached to frame.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Shelf With Bar And Banister (Ship Model)
50 cm: 05.52860 cm: 05.628
76 [3"]
400[153/4"]
400
[153
/4"]
500[19 11/16"]
500
[19
11/1
6"]
76 [3"]
04.430 40 cm
04.530 50 cmCorner Towel Shelf with Bar is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick.� Shelf and bar are 12mm tube, 1mm thick and are mechanically attached to frame.� Frame is securely attached to wall with stainless steel screws.�
Corner Towel Shelf With Bar
04.430-30 40 cm Inox Bright
04.530-30 50 cm Inox Bright
27
Towel Shelves
04.527-30 50 cm Inox Bright
04.527-00 50 cm Inox Satin
04.627-30 60 cm Inox Bright
04.627-00 60 cm Inox Satin
Towel Shelf is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Shelf is 12mm tube, 1mm thick and is mechanically attached to frame.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Shelf
04.527 50 cm
04.627 60 cm
04.429 40 cm
04.529 50 cm
Corner Towel Shelf is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick.� Shelf is 12mm tube, 1mm thick and is mechanically attached to frame.� Frame is securely attached to wall with stainless steel screws.�
Corner Towel Shelf
04.429-30 40 cm Inox Bright
04.529-30 50 cm Inox Bright
16
[5/8
"]
400
[153
/4"]
400[153/4"]
16
[5/8
"]
500
[19
11/1
6"]
500[19 11/16"]
28
KNOSSOSTowel Shelves
04.304-30 30 cm Inox Bright
04.304-00 30 cm Inox Satin
04.604-30 60 cm Inox Bright
04.604-00 60 cm Inox Satin
Towel Bar Single
04.304 30 cm
04.504 50 cm
04.604 60 cm
60
[2 3
/8"]
72[2 13/16"]
360[14 3/16"]
60[2
3/8
"]
560[22 1/164"]
72[2 13/16"]
04.504-30 50 cm Inox Bright
04.504-00 50 cm Inox Bright
04.505 50 cm
04.605 60 cm
Towel Bar Double
04.505-30 50 cm Inox Bright
04.505-00 50 cm Inox Satin
60 cm: 04.605-30 Inox Bright
60 cm: 04.605-00 Inox Satin
560[22 1/16"]
132[5 3/16"]
95[3
3/4
"]
Double Towel Bar is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Bar is 12mm tube, 1mm thick and is mechanically attached to frame.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Single Towel Bar is manufactured completely from AISI 304 stainless steel.� Towel bar is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
29
Towel Bars
04.408-30 40 cm Inox Bright
04.408-00 40 cm Inox Satin
Swivelling Towel Bar is manufactured completely from AISI 304 stainless steel.� Towel bar is 16mm tube, 1.�2mm thick and is mechanically pressed into the solid stainless steel swivelling mechanism, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is 2mm thick.� Concealed mounting flange is 2mm thick and is securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screws.�
Towel Bar Swivelling
04.408 40 cm
Bowl Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Bowl Brush Cleaner
04.040
04.040-30 Inox Bright
04.040-00 Inox Satin
80[3 1/8"]
87[3 7/16"]
353
[13
7/8"
]
30
KNOSSOSTowel Bars / Brushes
80[31/8"]
80[3
1/8"
]
400[153/4"]
Reserve Vertical Paper Holder is manufactured completely from AISI 304 stainless steel.� Paper Roll is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Support ring is 2mm thick and is mechanically pressed in paper roll.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder Vertical
04.111
04.111-30 Inox Bright
04.111-00 Inox Satin
60[23/8"]
89[31/2"]
227
[815
/16"
]
04.011-30 Inox Bright
04.011-00 Inox Satin
Reserve Horizontal Paper Holder is manufactured completely from AISI 304 stainless steel.� Paper Roll is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder Horizontal
04.011
240
[9 7/16"]
64[2
1/2
"]
72
[2 13/16"]
31
Paper Holders
04.002-30 Inox Bright
04.002-00 Inox Satin
04.112-30 Inox Bright
04.112-00 Inox Satin
Paper Holder with Cover is manufactured completely from AISI 304 stainless steel.� Cover is 1mm thick and attaches to 1.�5mm thick bracket with stainless steel rivets.� Roller is 1.�5mm thick semi-cylinder shaped and securely attached to bracket.� The semi-cylinder shape prevents paper roll from spinning freely, thus resulting in economy in paper usage.� Bracket is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder With Cover
04.112 04.002Three QuartersTowel Ring is manufactured from AISI 304 stainless steel and solid brass.� Ring is 16mm tube, 1.�2mm thick and attaches to a solid brass bracket.� Two highly durable plastic rings protect rotation points.� Bracket attaches to 2mm thick mounting flange, with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Ring Three Quarters
With non-removable paper roll holder.�
96[3
3/4
"]
125[4 15/16"]
125[4 15/16"]
255[10"] 38
[1 1/2"]
114
[4 1
/2"]
32
KNOSSOSPaper Holders / Towel Rings
04.001-30 Inox Bright
04.001-00 Inox Satin
04.003-30 Inox Bright
04.003-00 Inox Satin
Towel Ring is manufactured from AISI 304 stainless steel and solid brass.� Ring is 12mm tube, 1mm thick and attaches to a solid brass bracket.� Two highly durable plastic rings protect rotation points.� Bracket attaches to 2mm thick mounting flange, with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Ring
04.001
04.101-30 Inox Bright
04.101-00 Inox Satin
Towel Ring is manufactured completely from AISI 304 stainless steel.� Ring is 12mm tube, 1mm thick and attaches to 1.�5mm thick bracket.� Two highly durable plastic rings protect rotation points.� Bracket is mechanically pressed to 2mm thick mounting flange with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Ring
04.101
04.003Trapezoidal Towel Ring is manufactured completely from AISI 304 stainless steel.� Ring is 12mm tube, 1mm thick and attaches to 1.�5mm thick bracket.� Two highly durable plastic rings protect rotation points.� Bracket is mechanically pressed to 2mm thick mounting flange with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Ring Trapezoidal
200
[7 7/8"]
38
[1 1/2"]
224
[8 1
3/16
"]
200
[7 7/8"]45
[1 13/16"]
220
[8 1
1/16
"]
234[9 3/16"]
45
[1 13/16"]
212
[8 3
/8"]
33
Towel Rings
02.110-30 Inox Bright
02.110-00 Inox Satin
04.009-30 Inox Bright
04.009-00 Inox Satin
Robe Hook is manufactured completely from AISI 304 stainless steel.� Hook is 1.�5mm thick and is mechanically pressed into 1.�5mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange securely attaches to wall with exposed stainless steel screws.�
Robe Hook Single
02.110
02.210-30 Inox Bright
02.210-00 Inox Satin
Double Robe Hook is manufactured completely from AISI 304 stainless steel.� Hooks are 1.�5mm thick and are mechanically pressed into 1.�5mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange securely attaches to wall with exposed stainless steel screws.�
Robe Hook Double
02.210
04.009Single Robe Hook is manufactured completely from AISI 304 stainless steel.� Hook is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Robe Hook Single
155[6 1/8"]
37[1 7/16"]
91[3
5/8
"]
73[2
7/8
"]
60[2 3/8"]
57[2 1/4"]
34
KNOSSOSHooks
91[3
5/8
"]
55[2 3/16"]
37[1 7/16"]
73[2 7/8"]
60[2
3/8
"]
48[1 7/8"]
Robe Hook is manufactured completely from AISI 304 stainless steel.� Hook is 2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Robe Hook is manufactured completely from AISI 304 stainless steel.� Hook is 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Robe Hook Double Robe Hook Single
04.010 04.110
04.010-30 Inox Bright
04.010-00 Inox Satin
04.110-30 Inox Bright
04.110-00 Inox Satin
35
Hooks
04.020-30 Inox Bright
04.020-00 Inox Satin
02.036-30 Inox Bright
02.036-00 Inox Satin
Sponge Holder is manufactured completely from AISI 304 stainless steel.� Sponge holder is 4mm solid round and is mechanically attached into solid orthogonal 15x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Sponge Holder Metallic
04.020
04.036-30 Inox Bright
04.036-00 Inox Satin
Corner Sponge Holder is manufactured completely from AISI 304 stainless steel.� Sponge holder is 1mm thick and is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Sponge Holder Corner
04.036
02.036Corner Sponge Holder is manufactured completely from AISI 304 stainless steel.� Sponge holder is 1mm thick and is attached to 1.�5mm thick mounting flange with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel exposed screws.�
Sponge Holder Corner
155
[6 1/8"]
60[2
3/8
"]14
0[5
1/2
"]
160
[6 5/16"]
172
[6 3
/4"]
60
[2 3
/8"]
209[8 1/4"]
160
[6 5/16"]
166
[6 9
/16"
]55
[2 3
/16"
]
209[8 1/4"]
36
KNOSSOSSoap and Sponge Holders
02.236-30 Inox Bright
02.236-00 Inox Satin
04.021-30 Inox Bright
04.021-00 Inox Satin
Double Corner Sponge Holder is manufactured completely from AISI 304 stainless steel.� Sponge holder is 1mm thick and is attached to 1.�5mm thick mounting flange with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel exposed screws.�
Sponge Holder Corner, Double
02.236
02.235-30 Inox Bright
02.235-00 Inox Satin
Double Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Soap and sponge holder is 1mm thick and is attached to 1.�5mm thick mounting flange with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel exposed screws.�
Soap and Sponge Holder Metallic, Double
02.235
04.021Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Soap and sponge holder is 4mm solid round and is mechanically attached into solid orthogonal 15x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Soap and Sponge Holder Metallic
160[6 5/16"]
166
[6 9
/16"
]15
3[6
"]
209[8 1/4"]
227
[8 15/16"]
113
[4 7
/16"
]
153
[6"]
245
[9 5/8"]
60
[2 3
/8"]
140
[5 1
/2"]
37
Soap and Sponge Holders
02.035-30 Inox Bright
02.035-00 Inox Satin
04.014-01 Bright
Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Soap and sponge holder is 1mm thick and is attached to 1.�5mm thick mounting flange with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel exposed screws.�
Soap and Sponge Holder Metallic
02.035
04.035-30 Inox Bright
04.035-00 Inox Satin
Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Soap and sponge holder is1mm thick and is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Soap and Sponge Holder Metallic
04.035
04.014Crystal Soap Holder is manufactured from AISI 304 stainless steel, solid brass and crystal.� Soap holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Soap holder is satin crystal.�
Soap Holder
227
[8 15/16"]
55[2
3/1
6"]
113
[4 7
/16"
]
227
[8 15/16"]
60[2
3/8
"]11
9[4
11/
16"]
134[5 1/4"]
111[4 3/8"]
60[2
3/8
"]
38
KNOSSOSSoap and Sponge Holders
04.034-30 Inox Bright
04.034-00 Inox Satin
04.107-30 Inox Bright
04.107-00 Inox Satin
Crystal Soap Holder is manufactured from AISI 304 stainless steel and crystal.� Soap holder ring is 1.�5mm thick and mechanically attaches to 2mm thick mounting flange with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Soap holder is satin crystal.�
Soap Holder
04.034
04.019-30 Inox Bright
04.019-00 Inox Satin
Soap Holder is manufactured completely from AISI 304 stainless steel.� Soap holder is 4mm solid round and is mechanically attached into solid orthogonal 15x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Soap Holder Metallic
04.019
04.107Soap Dish with Holes is manufactured completely from AISI 304 stainless steel.� Soap dish is 1mm thick with oval shaped draining holes and special gradient for water drainage.� It attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Soap Dish With Holes
134[5 1/4"]
64[2
9/1
6"]
117
[4 5
/8"]
120[4 3/4"]
60[2
3/8
"]11
5[4
1/2
"]
120[43/4”]
60[2
3/8”
]97
[313
/16”
]
39
Soap Holders / Soap Dishes
Soap Dish is manufactured completely from AISI 304 stainless steel.� Soap dish is 1mm thick and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Liquid soap dispenser is manufactured from AISI 304 stainless steel, solid brass and crystal.� Tumbler holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Container is made from frosted crystal and has a metallic pump.�
Soap Dish Liquid Soap Dispenser With Crystal Container and Metallic Pump04.00704.318
04.007-30 Inox Bright
04.007-00 Inox Satin 04.318-01 Bright
120[4 3/4"]
60[2
3/8
"]97
[3 1
3/16
"]
175
[67/
8"]
75[2 15/16"]
116[4 9/16"]
40
KNOSSOSSoap Dishes / Liquid Soap Dispensers
04.013-01 Bright
02.233-30 Inox Bright
02.233-00 Inox Satin
Glass Tumbler Holder is manufactured from AISI 304 stainless steel, solid brass and crystal.� Tumbler holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Tumbler is satin crystal.�
Tumbler Holder Satin Crystal
04.013
04.033-30 Inox Bright
04.033-00 Inox Satin
Glass Tumbler Holder is manufactured from AISI 304 stainless steel and crystal.� Tumbler holder ring is 1.�5mm thick and mechanically attaches to 2mm thick mounting flange with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Tumbler is satin crystal.�
Tumbler Holder Satin Crystal
04.033
02.233Double Glass Tumbler Holder is manufactured from AISI 304 stainless steel and crystal.� Tumbler holder rings are 1.�5mm thick and mechanically attached to 1.�5mm thick mounting flange with no welding providing a secure and aesthetically correct attachment.� Mounting flange securely attaches to wall with exposed stainless steel screws.� Tumblers are satin crystal.�
Tumbler Holder Double Satin Crystal
191
[7 1/2"]
91[3
9/1
6"]
96
[3 3
/4"]
41
Tumbler - Toothbrush Holders
94[3 11/16"]
96[3
13/
16"]
75[2 15/16"]
90[3 9/16"]
91[3
9/1
6"]
102
[4"]
BATHROOM ACCESSORIESCOLLECTION
42
ELEGANCE Steady and trendy
Modern design series, ideal for modern design environments.� Big variety of products that can meet all requirements.�
Available finishes: Bright, Satin
44
11.009-30 Inox Bright
11.210-30 Inox Bright
Robe Hook is manufactured completely from AISI 304 stainless steel.� Hook is 20mm diameter solid bar.� Concealed mounting base is 16mm diameter solid bar stainless steel and securely attaches to wall with stainless steel screw and locks with hook with stainless steel locking screw.�
Robe Hook Single
11.009
11.010-30 Inox Bright
Double Robe Hook is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter, 1mm thick tube with no welding providing a secure and aesthetically correct attachment.� Hooks are 20mm diameter solid bar.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Robe Hook Double
11.010
11.210Double Robe Hook is manufactured completely from AISI 304 stainless steel.� Hooks are 20mm diameter solid bar and are placed over 1.�5mm thick plate.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and lock with hooks with stainless steel locking screw.�
Robe Hook Double
60[2
3/8
"]
20
[13/16"]
20[1
3/16
"]
20
[13/
16"]
60[2
3/8
"]
138
[5 7/16"]
66[2
5/8
"]
153[6"]
35[1
3/8
"]
ELEGANCEHooks
Towel Shelf with Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter, 1mm thick tube towel shelf and bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Towel Shelf With Bar
11.528 50 cm
11.628 60 cm
45
11.528-30 60 cm Inox Bright
11.628-30 60 cm Inox Bright
520[20 1/2"]
220
[8 1
1/16
"]
100
[3 1
5/16
"]
620[24 7/16"]
220
[8 1
1/16
"]10
0[3
15/
16"]
600[23 5/8"]
75[2
15/
16"]
20[1
3/16
"]
Towel Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter, 1mm thick tube towel bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Towel Shelves / Towel Bars
11.644-30 60 cm Inox Bright
11.844-30 60 cm Inox Bright
Towel Bar Vanity Mounted
11.644 60 cm
11.844 80 cm
800[31 1/2"]
75[2
15/
16"]
20[1
3/16
"]
11.604-30 60 cm Inox Bright
Towel Bar Single
11.304 30 cm
11.504 50 cm
11.604 60 cm
11.505 50 cm
11.605 60 cm
Towel Bar Double
11.605-30 60 cm Inox Bright
11.505-30 50 cm Inox Bright
Towel Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter, 1mm thick tube towel bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
11.304-30 30 cm Inox Bright
75[2
15/
16"]
20[1
3/16
"]
520[20 1/2"]
620
[24 7/16"]
75[2
15/
16"]
20[1
3/16
"]
11.504-30 50 cm Inox Bright
ELEGANCETowel Bars
320[12 5/8"]
75[2
15/
16"]
20[1
3/16
"]
Towel Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter, 1mm thick tube towel bar with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
520[20 1/2"]
115
[4 1
/2"]
100
[3 1
5/16
"]
620[24 7/16"]
115
[4 1
/2"]
100
[3 1
5/16
"]
46
190[7 1/2"]
74[2 15/16"]
138
[5 7
/16"
]
11.001-30 Inox Bright
11.112-30 Inox Bright
Towel Ring is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar towel ring with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Towel Ring
11.001
11.011-30 Inox Bright
Paper Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Paper Holder
11.011
11.112Paper Holder with Cover is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Cover is 1mm thick sheet.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Paper Holder With Cover
140[5 1/2"]
100[3 15/16"]
86[3
3/8
"]
140[5 1/2"]
150[5 7/8"]
86[3
3/8
Towel Rings / Paper Holders
47
Paper Holder With Cover and Reserve
11.212 11.312Paper Holder With Cover, Double
Paper Holder with Cover and Reserve is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Cover is 1mm thick sheet.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Double Paper Holder with Cover is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Cover is 1mm thick sheet.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
11.212-30 Inox Bright 11.312-30 Inox Bright
140[5 1/2"]
150[5 7/8"]
220
[8 1
1/16
"]
201
[7 7
/8"]
270
[10
5/8"
]
144[5 11/16"]
123[4 13/16"]
ELEGANCEPaper Holders
48
11.111-30 Inox Bright
Paper Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 12mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Paper Holder Vertical
11.111Bowel Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Bowl Brush Cleaner
11.040
11.040-30 Inox Bright
200
[7 7
/8"]
60[2 3/8"]
75[2 15/16"]
80[3 1/8"]
87[3 7/16"]
397
[15
5/8"
]
Paper Holders / Brushes
49
11.021-30 Inox Bright11.014-30 Inox Bright
Soap Dish is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 4mm diameter solid bar soap holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Soap holder is satin crystal.�
Soap Dish
11.014 11.021Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 4mm and 6mm diameter solid bar holders with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Soap and Sponge Holder
160
[6 5/16"]
51 [2"]
106
[4 3
/16"
]
320[12 5/8"]
34[1
5/1
6"]
145
[5 1
1/16
"]
ELEGANCESoap Dishes / Soap and Sponge Holders
50
11.318-30 Inox Bright 11.013-30 Inox Bright
Liquid soap dispenser is manufactured completely from AISI 304 stainless steel and crystal.� Brackets are 20mm diameter solid bar and are joined with 4mm diameter solid bar soap holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Container is made from frosted crystal and has a metallic pump.�
Liquid Soap Dispenser With Crystal Container and Metallic Pump
11.31811.013Tumbler Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 4mm diameter solid bar tumbler holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.� Tumbler is satin crystal.�
Tumbler Holder
160
[6 5/16"]
175
[6 7
/8"]
114
[4 1
/2"]
160
[6 5/16"]
91[3
9/1
6"]
85[3
3/8
"]
Soap Dispensers / Tumbler -Toothbrush Holders
51
BATHROOM ACCESSORIESCOLLECTION
52
SWING Less is more
Very modern and minimal design range of accessories.� Ideal for modern residential projects as well as minimal design hotels.�
Available finishes: Bright, Satin
Soap Dish is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 6mm diameter solid bar and 1mm thick sheet soap dish with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Soap Dish
12.007
54
12.007-30 Inox Bright
12.021-30 Inox Bright
Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 4mm and 6mm diameter solid bar holders with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
12.006-30 Inox Bright
Toothbrush Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 6mm diameter solid bar toothbrush holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Toothbrush Holder
12.006
18[1
1/16
’’]
178[7’’]
115
[4 1
/2’’]
34[1
5/1
6’’]
145
[5 1
1/16
’’]
298[11 3/4’’]
178[7’’]
60[2
3/8
’’]
18[1
1/16
’’]
SWINGSoap Dishes / Soap and Sponge Holders
Soap and Sponge Holder
12.021
55
12.010-30 Inox Bright
12.001-30 Inox Bright
12.009-30 Inox Bright
Single Robe Hook is manufactured completely from AISI 304 stainless steel.� Bracket is 18mm diameter solid bar and is joined with 6mm diameter solid bar hook with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 16mm diameter solid bar stainless steel and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Robe Hook Single
12.009
12.010
12.001
Double Robe Hook is manufactured completely from AISI 304 stainless steel.� Bracket is 18mm diameter solid bar and is joined with 6mm diameter solid bar hook with no welding providing a secure and aesthetically correct attachment.� Concealed mounting base is 16mm diameter solid bar stainless steel and securely attaches to wall with stainless steel screw and locks with bracket with stainless steel locking screw.�
Towel Ring is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 10mm diameter solid bar towel ring with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Robe Hook Double
Towel Ring
18[11/16’’]
38[1
1/2
’’]60
[2 3
/8’’]
69[2 3/4’’]
60[2
3/8
’’]
18[1
1/16
’’]
75[2
15/
16’’]
115
[4 1
/2’’]
254[10’’]
Toothbrush Holders / Hooks
12.604-30 60 cm Inox Bright
Towel Bar Single
12.304 30 cm
12.504 50 cm
12.604 60 cm
12.304-30 30 cm Inox Bright
548[21 9/16’’]
18[1
1/16
’’]75
[2 1
5/16
’’]75
[2 1
5/16
’’]18
[11/
16’’]
648[25 1/2’’]
12.504-30 50 cm Inox Bright
12.111-30 Inox Bright
Paper Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 10mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Paper Holder
12.111
SWINGTowel Bars / Paper Holders
548[21 9/16’’]
18[1
1/16
’’]75
[2 1
5/16
’’]
Towel Bar is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 10mm diameter solid bar towel holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
224[8 13/16’’]
75[2
15/
16’’]
30[1
3/1
6’’]
56
11.040
Bowl Brush Cleaner Wall Mounted and Free Standing
Bowel Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
11.040-30 Inox Bright12.011-30 Inox Bright
80[3 1/8"]
87[3 7/16"]
397
[15
5/8"
]
Paper Holder is manufactured completely from AISI 304 stainless steel.� Brackets are 18mm diameter solid bar and are joined with 10mm diameter solid bar paper roll holder with no welding providing a secure and aesthetically correct attachment.� Concealed mounting bases are 16mm diameter solid bar stainless steel and securely attach to wall with stainless steel screws and locks with brackets with stainless steel locking screw.�
Paper Holder
12.011
Paper Holders / Brushes
149[5 7/8’’]
115
[4 1
/2’’]
75[2
15/
16’’]
57
BATHROOM ACCESSORIESCOLLECTION
58
EXCELSIOR Royal choice
High end range for luxurious environments with classic design and solid construction.� Ideal for hotel suites and residential villas.� World class range of accessories.�
Available finishes: Bright
08.527-30 50 cm Inox Bright
08.627-30 60 cm Inox Bright
Towel Shelf
08.527 50 cm
08.627 60 cm
08.304-30 30 cm Inox Bright
08.504-30 50 cm Inox Bright
08.604-30 60 cm Inox Bright
Single Towel Bar is manufactured completely from AISI 304 stainless steel.� Bases are 40mm diameter solid bar and are joined to 2mm thick mounting flanges with stainless steel screw.� Towel bar is 18mm diameter 1mm thick tube and is joined to bases with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flanges are 1.�25mm thick stainless steel and securely attach to wall with stainless steel screws and lock with mounting flanges with stainless steel locking screw.�
Towel Bar Single
08.304 30 cm
08.504 50 cm
08.604 60 cm
588[23 1/8"]
60[2
5/1
6"]
256
[10
1/16
"]
688[27 1/16"]
60[2
5/1
6"]
256
[10
1/16
"]
388[15 1/4"]
60[2
5/1
6"]
101
[4"]
588[23 1/8"]
60[2
5/1
6"]
101
[4"]
688[27 1/16"]
60[2
5/1
6"]
101
[4"]
EXCELSIORTowel Shelves / Towel Bars
Towel Shelf is manufactured completely from AISI 304 stainless steel.� Bases are 40mm diameter solid bar and are joined to 2mm thick mounting flanges with stainless steel screw.� Towel shelf is 18mm diameter 1mm thick tube and is joined to bases with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flanges are 1.�25mm thick stainless steel and securely attach to wall with stainless steel screws and lock with mounting flanges with stainless steel locking screw.�
60
08.010-30 Inox Bright
08.013-30 Inox Bright
08.001-30 Inox Bright
Towel Ring is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Towel ring is 12mm diameter 1mm thick tube and is joined to base with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Ring
08.001
08.010
08.013
Robe Hook is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Hooks are 25mm diameter solid bar and are joined to base with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Tumbler Holder is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Holder is 2mm thick sheet and 25mm diameter solid bar and is joined to base with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Tumbler is satin crystal.�
Robe Hook
Tumbler Holder
Towel Rings / Hooks / Tumbler - Toothbrush Holders
180
[7 1/16"]
198
[7 1
3/16
"]
101
[4"]
88[3 7/16"]
60[2
3/8
"]10
1[4
"]
163
[6 7/16"]
91[3
9/1
6"]
126
[4 1
5/16
"]
61
Soap Holder is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Holder is 2mm thick sheet and 25mm diameter solid bar and is joined to base with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Soap holder is satin crystal.�
Soap Dish
08.014
62
08.014-30 Inox Bright
08.021-30 Inox Bright
Soap and Sponge Holder is manufactured completely from AISI 304 stainless steel.� Bases are 40mm and 18mm diameter solid bar and are joined to 2mm thick mounting flanges with stainless steel screw.� Soap and sponge holder is 6mm and 8mm diameter solid bar and is joined to bases with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flanges are 1.�25mm thick stainless steel and securely attach to wall with stainless steel screws and lock with mounting flanges with stainless steel locking screw.�
08.318-30 Inox Bright
Liquid soap dispenser is manufactured from AISI 304 stainless steel, solid brass and crystal.� Tumbler holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Container is made from frosted crystal and has a metallic pump.�
Liquid Soap Dispenser With Crystal Container and Metallic Pump
08.318
189
[7 7/16"]
60
[2 3
/8"]
134
[5 5
/16"
]
360[14 3/16"]
34[1
5/1
6"]
191
[7 1
/2"]
163[6 7/16"]
175
[6 7
/8"]
146
[5 3
/4"]
EXCELSIORSoap Dishes / Soap and Sponge Holders / Soap Dispensers
Soap and Sponge Holder
08.021
63
08.111-30 Inox Bright
08.040-30 Inox Bright
08.112-30 Inox Bright
Paper Holder with Cover is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Paper Roll is 18mm tube, 1mm thick and is joined to base with no welding providing a secure and aesthetically correct attachment.� Cover is 1mm thick sheet.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder With Cover
08.112
08.111
08.040
Reserve Vertical Paper Holder is manufactured completely from AISI 304 stainless steel.� Base is 40mm diameter solid bar and is joined to 2mm thick mounting flange with stainless steel screw.� Paper Roll is 18mm tube, 1mm thick and is joined to base with no welding providing a secure and aesthetically correct attachment.� Support ring is 2mm thick and is mechanically pressed in paper roll.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Bowel Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 18mm 1mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Paper Holder Vertical
Bowl Brush CleanerWall Mounted and Free Standing
223[8 3/4"]
105
[4 1
/8"]
140
[5 1
/2"]
60[2 3/8"]
221
[8 1
1/16
"]11
1[4
3/8
"]
80
[3 1/8"]87
[3 7/16"]
400
[15
3/4"
]
Paper Holders / Brushes
BATHROOM ACCESSORIESCOLLECTION
64
POSEIDON Vintage look
Design that matches vintage style taps and sanitary ware.� Complete range that can be installed to all classic design environments.�
Available finishes: Bright
66
Towel Shelf With Bar
06.528 50 cm
06.628 60 cm
06.528-01 50 cm Bright
06.304-01 50 cm Bright
06.504-01 50 cm Bright
06.604-01 50 cm Bright06.628-01 50 cm Bright
Single Towel Bar is manufactured from AISI 304 stainless steel and brass.� Towel bar is 12mm tube, 1mm thick and mechanically attaches to solid brass brackets.� The brackets mount to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Towel Bar
06.304 30 cm
06.504 50 cm
06.604 60 cmTowel Shelf with Towel Bar is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Shelf and bar is 12mm tube, 1mm thick and is mechanically attached to frame.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
560[22 1/16"]
105
[4 1
/8"]
250
[9 1
3/16
"]
660[26"]
105
[4 1
/8"]
250
[9 1
3/16
"]
60[2
3/8
"]64
[2 1
/2"]
373
[14 11/16"]60
[2 3
/8"]
64[2
1/2
"]
573[22 9/16"]
60[2
3/8
"]64
[2 1
/2"]
673[26 1/2"]
POSEIDONTowel Shelves / Towel Bars
67
06.516-01 50 cm Bright
06.616-01 50 cm Bright
06.816-01 50 cm Bright 06.001-01 Bright
Bathroom Shelves / Towel Rings
06.001Towel Ring
Towel Ring is manufactured from AISI 304 stainless steel and solid brass.� Ring is 12mm stainless steel tube, 1mm thick and attaches to solid brass bracket.� Two highly durable plastic rings protect rotation points.� Bracket attaches to 2mm thick mounting flange, with stainless steel screw.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Glass Bathroom Shelf is manufactured from AISI 304 stainless steel, solid brass and crystal.� Bracket is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Shelf is 8mm thick crystal.�
Glass Bathroom Shelf
06.516 50 cm
06.616 60 cm
06.816 85 cm
66[2
5/8
"]
141[5 9/16"]
500[19 11/16"]
66[2
5/8
"]
141[5 9/16"]
600[23 5/8"]
66[2
5/8
"]
141[5 9/16"]
850[33 7/16"]
200
[7 7/8"]
40
[1 9/16"]
230
[9 1
/16"
]
Robe Hook Single
06.009Paper Holder is manufactured from AISI 304 stainless steel and brass.� Paper roll is 12mm tube, 1mm thick and mechanically attaches to solid brass bracket.� The bracket mounts to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Robe Hook is manufactured from AISI 304 stainless steel and brass.� Hook is solid brass and attaches to 2mm thick mounting flange with stainless steel screw.� Concealed mounting flange is 1.�25mm thick stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder
06.01160
[2 3
/8"]
73
[2 7/8"]
64
[2 1
/2"]
06.009-01 Bright 06.011-01 Bright
89[3
1/2
"]
61[2 7/16"]
197[7 3/4"]
POSEIDONHooks/ Paper Holders
68
06.040
Bowl Brush Cleaner Wall Mounted and Free Standing
Bowel Brush Cleaner is manufactured completely from AISI 304 stainless steel.� Cover is 80mm tube, 1.�5mm thick.� Elastic brush attaches with 0.�6mm thick cover and 16mm 1.�2mm thick handle with stainless steel screw and is specially designed not to hold dirt.� Bowel brush cleaner may be mounted to wall with 1.�25mm thick mounting flange and stainless steel screw.� Removable bottom is plastic.�
Verical Reserve Paper Holder is manufactured from AISI 304 stainless steel and brass.� Paper roll is 12mm tube, 1mm thick and mechanically attaches to solid brass bracket.� The bracket mounts to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Paper Holder Vertical, Reserve
06.111
06.111-01 Bright 06.040-01 Bright
155
[6 1
/8"]
60
[2 3/8"]
111
[4 3/8"]
80
[3 1/8"]
87
[3 7/16"]
353
[13
7/8"
]
Paper Holders / Brushes
69
Sponge Holder Corner Mounted
06.024Soap and Sponge Holder is manufactured from AISI 304 stainless steel and solid brass.� Soap and sponge holder is 4mm solid brass and is mechanically attached into solid brass orthogonal 13x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Soap and Sponge Holder
06.021Corner Sponge Holder is manufactured from AISI 304 stainless steel and solid brass.� Sponge holder is 4mm solid brass and is mechanically attached into solid brass orthogonal 13x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is attached to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
191
[7 1
/2"]
85
[3 5
/16"
]
165
[6 1/2"]
06.024-01 Bright 06.021-01 Bright
245
[9 5/8"]
85
[3 3
/8"]
146
[5 3
/4"]
POSEIDONSoap and Sponge Holders
70
Crystal Soap Holder is manufactured from AISI 304 stainless steel, solid brass and crystal.� Soap holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws.� It locks with mounting flange with stainless steel locking screw.� Soap holder is satin crystal.�
Soap Dish
06.014
06.318
06.013
Liquid soap dispenser is manufactured from AISI 304 stainless steel, solid brass and crystal.� Tumbler holder ring is solid brass and attaches to 2mm thick mounting flange with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Container is made from frosted crystal and has a metallic pump.�
Crystal Tumbler Holder is manufactured from AISI 304 stainless steel, solid brass and crystal.� Tumbler holder ring is solid brass and attaches to 2mm thick (14 gauge) mounting flange with stainless steel screws.�Concealed mounting flange is 1.�25mm thick and securely attached to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Tumbler is satin crystal.�
Liquid Soap Dispenser With Crystal Container and Metallic Pump
Tumbler Holder Satin Crystal
06.014-01 Bright
06.318-01 Bright
06.013-01 Bright
91[3
9/1
6"]
134[5 1/4"]
150[5 7/8"]
175
[6 7
/8"]
75
[3"]
160
[6 1/4"]
148
[5 1
3/16
"]
75[3"]
138[5 1/2"]
Soap Dishes / Soap Dispensers / Tumbler -Toothbrush Holders
71
BATHROOM ACCESSORIESCOLLECTION
72
UNIVERSAL Made to complete
This range of accessories includes items complimentary to all series.� You can combine products of the Universal series with any other product line.�
Available finishes: Bright, Satin
74
03.212-30 Inox Bright
03.212-00 Inox Satin
03.211-30 Inox Bright
03.211-00 Inox Satin
Double Recessed Paper Holder is manufactured completely from AISI 304 stainless steel.� Shell is 1mm thick.� Cover is 1mm thick stainless steel.� Paper rolls are AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Double Recessed Paper Holder is manufactured completely from AISI 304 stainless steel.� Shell is 1mm thick.� Paper rolls are AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Recessed, With Cover, Double Paper Holder Recessed, Double
03.212 03.211
UNIVERSALPaper Holders
Stainless Steel AISI 304 paper roll holder is included.� Required wall opening for recession: 29x13cm depth 5cm.�
314[12 3/8"]
157
[6 3
/16"
]
125
[4 1
5/16
"]
45[1 3/4"]
80[3 3/16"]
Stainless Steel AISI 304 paper roll holder is included.� Required wall opening for recession: 29x13cm depth 5cm.�
314[12 3/8"]
157
[6 3
/16"
]
125
[4 1
5/16
"]
45[1 3/4"]
33
[1 5/16"]
284[11 3/16"]
75
02.212-30 Inox Bright
02.212-00 Inox Satin
02.211-30 Inox Bright
02.211-00 Inox Satin
03.112-30 Inox Bright
03.112-00 Inox Satin
Paper Holder Wall Mounted, With Cover, Double
02.212
03.112Recessed Paper Holder is manufactured completely from AISI 304 stainless steel.� Shell is 1mm thick.� Cover is 1mm thick stainless steel.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Recessed, With Cover
Stainless Steel AISI 304 paper roll holder is included.�
242[9 1/2"]
25 [1"]
85[3 3/8"]
128[5"]
64[2
1/2
"]
Double Paper Holder with Cover is manufactured completely from AISI 304 stainless steel 4mm thick.� Cover is 1mm thick stainless steel.� It securely attaches to wall with stainless steel screws.� Paper rolls are AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Stainless Steel AISI 304 paper roll holder is included.�
242[9 1/2"]
25 [1"]
85[3 3/8"]
128[5"]
02.211Double Paper Holder is manufactured completely from AISI 304 stainless steel 4mm thick.� It securely attaches to wall with stainless steel screws.� Paper rolls are AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Double
Paper Holders
Stainless Steel AISI 304 paper roll holder is included.� Required wall opening for recession: 13x13cm depth 5cm.�
157[6 3/16"]
157
[6 3
/16"
]
125
[4 1
5/16
"]
45[1 3/4"]
80[3 3/16"]
02.111-30 Inox Bright
02.111-00 Inox Satin
Single Paper Holder is manufactured completely from AISI 304 stainless steel 4mm thick.� It securely attaches to wall with stainless steel screws.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Wall Mounted
02.11103.111Recessed Paper Holder is manufactured completely from AISI 304 stainless steel.� Shell is 1mm thick.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Recessed
03.111-30 Inox Bright
03.111-00 Inox Satin
Stainless Steel AISI 304 paper roll holder is included.�
123[4 13/16"]
25 [1"]
85[3 3/8"]
128[5"]
UNIVERSALPaper Holders
Stainless Steel AISI 304 paper roll holder is included.� Required wall opening for recession: 13x13cm depth 5cm.�
157[6 3/16"]
157
[6 3
/16"
]
125
[4 1
5/16
"]
45[1 3/4"]
33[1 5/16"]
76
00.436 40 cm
00.536 50 cm
00.636 60 cm
Bathroom Shelf Metallic
02.112-30 Inox Bright
02.112-00 Inox Satin
00.436-30 40 cm !nox Bright
00.436-00 40 cm Inox Satin
00.536-30 50 cm Inox Bright
00.536-00 50 cm Inox Satin
00.636-30 60 cm Inox Bright
00.636-00 60 cm Inox Satin
Single Paper Holder with Cover is manufactured completely from AISI 304 stainless steel 4mm thick.� Cover is 1mm thick stainless steel.� It securely attaches to wall with stainless steel screws.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Paper Holder Wall Mounted, With Cover
02.112
Stainless Steel AISI 304 paper roll holder is included.�
123[4 13/16"]
25 [1"]
85[3 3/8"]
128[5"]
64[2
1/2
"]
Metallic Bathroom Shelf is completely manufactured from 1.�25mm thick AISI 304 stainless steel.� All corners are rounded to eliminate the risk of injury.� It securely attaches to wall with three stainless steel screws.�
400[15 3/4"]
150[5 7/8"]
20[1
3/16
"]
30[1
3/1
6"]
500[19 11/16"]
150[5 7/8"]
20[1
3/16
"]
30[1
3/1
6"]
600[23 5/8"]
150[5 7/8"]
20[1
3/16
"]
30[1
3/1
6"]
Paper Holders / Shelves
77
04.416 40 cm
04.516 50 cm
04.616 60 cm
04.816 60 cm
05.416 40 cm
05.516 50 cm
05.616 60 cm
Bathroom Shelf Glass Bathroom Shelf Glass, With Banister
Glass Bathroom Shelf is manufactured from AISI 304 stainless steel and crystal.� Bracket is 2mm thick stainless steel and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Shelf is 8mm (5/16) thick crystal.�
Glass Bathroom Shelf with Banister is manufactured from AISI 304 stainless steel and crystal.� Bracket is 2mm thick stainless steel and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Protective banister is 6mm solid bar and is attached to the brackets with stainless steel screws.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.� Shelf is 8mm (5/16) thick crystal.�
400[15 3/4"]
135[5 5/16"]
60[2
3/8
"]
500[19 11/16"]
135[5 5/16"]
60[2
3/8
"]
600[23 5/8"]
135[5 5/16"]
60[2
3/8
"]
850[33 7/16"]
135[5 5/16"]
60[2
3/8
"]
04.816-30 85 cm Inox Bright
04.416-30 40 cm Inox Bright
05.416-30 40 cm Inox Bright
05.516-30 50 cm Inox Bright
05.616-30 60 cm Inox Bright
04.516-30 50 cm Inox Bright
04.616-30 60 cm Inox Bright
400[15 3/4"]
135[5 5/16"]
69[2
11/
16"]
500[19 11/16"]
135[5 5/16"]
69[2
11/
16"]
600[23 5/8"]
135[5 5/16"]
69[2
11/
16"]
UNIVERSALShelves
78
04.022
04.122
04.023
Angled Grab Bar Left, With Soap Holder
Angled Grab Bar Right, With Soap Holder
Angled Grab Bar Symmetrical
04.022-30 Inox Bright
04.022-00 Inox Satin
04.122-30 Inox Bright
04.122-00 Inox Satin
04.023-30 Inox Bright
04.023-00 Inox Satin
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 1mm thick with oval shaped draining holes and special gradient for water drainage.� It attaches to the grab bar with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 1mm thick with oval shaped draining holes and special gradient for water drainage.� It attaches to the grab bar with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Angled Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided
Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
420
[16 9/16"]
220
[8 1
1/16
"]11
3[4
7/1
6"]
Symmetrical grab bar.� Can be mounted left or right.�
420[16 9/16"]
220
[8 1
1/16
"]
113
[4 7
/16"
]
420
[16 9/16"]
220
[8 1
1/16
"]11
3
[4 7
/16"
]
that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bars
79
04.051
04.052
04.152
Angled Grab Bar Symmetrical, Anti-Slip
Angled Grab Bar Left, Anti-Slip, With Soap Holder
Angled Grab Bar Right, Anti-Slip, With Soap Holder
04.051-30 Inox Bright
04.052-30 Inox Bright
04.152-30 Inox Bright
Angled Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 1mm thick with oval shaped draining holes and special gradient for water drainage.� It attaches to the grab bar with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel screws and covered with
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 1mm thick with oval shaped draining holes and special gradient for water drainage.� It attaches to the grab bar with stainless steel screws.� Mounting flange is securely attached to wall with stainless steel screws and covered with
Symmetrical grab bar.� Can be mounted left or right.�
420
[16 9/16"]
220
[8 1
1/16
"]11
3[4
7/1
6"]
420
[16 9/16"]
220
[8 1
1/16
"]11
3
[4 7
/16"
]
that at least equal strength could sustain the wall or anchors to which it is attached.�
the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
420
[16 9/16"]
220
[8 1
1/16
"]11
3
[4 7
/16"
]
UNIVERSALGrab Bars
80
04.222
04.252
04.315 30 cm
04.415 40 cm
Angled Grab Bar Left, / Right, With Soap Holder
Angled Grab Bar Left / Right, Anti-Slip, With Soap Holder
Grab Bar
04.222-30 Inox Bright
04.222-00 Inox Satin
04.415-30 30 cm Inox Bright
04.415-00 40 cm Inox Satin
04.315-30 30 cm Inox Bright
04.315-00 30 cm Inox Satin
04.252-30 Inox Bright
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 4mm diameter solid bar.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided that at least
Angled Grab Bar with Soap Dish is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Soap dish is 4mm diameter solid bar.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 150Kg at any point for 5 minutes provided
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 180Kg at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
equal strength could sustain the wall or anchors to which it is attached.�
Symmetrical grab bar.� Can be mounted left or right by assembling the soap dish accordingly.�
that at least equal strength could sustain the wall or anchors to which it is attached.�
Symmetrical grab bar.� Can be mounted left or right by assembling the soap dish accordingly.�
420
[16 9/16"]
220
[8 1
1/16
"]11
3[4
7/1
6"]
420
[16 9/16"]
220
[8 1
1/16
"]11
3[4
7/1
6"]
380[14 15/16"]
90[3
9/1
6"]
80[3
1/8
"]
480[18 7/8"]
90[3
9/1
6"]
80[3
1/8
"]
Grab Bars
81
04.350 30 cm
04.450 40 cm
Grab Bar Anti-Slip
04.450-30 30 cm Inox Bright
04.350-30 30 cm Inox Bright
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�Grab bar should sustain dead weight of 180Kg at any point for
480[18 7/8"]
90[3
9/1
6"]
80[3
1/8
"]
380[14 15/16"]
90[3
9/1
6"]
80[3
1/8
"]
5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
02.201Towel Ring Double
02.201-01 Bright
Double Towel Ring is manufactured from AISI 304 stainless steel and brass.� Rings are 16mm tube 1.�2mm thick and attach to solid brass mounting flange.� Four highly durable plastic rings protect rotation points.� Mounting flange is securely attached to wall with stainless steel screws and covered by 1mm thick stainless steel protective cover.� Cover attaches to flange with two stainless steel screws.�
05.209Hygienic Bag Dispenser
05.209-30 Inox Bright
05.209-00 Inox Satin
99.042-00 Hygienic Bag Refills
Hygienic Bag Dispenser is manufactured completely from AISI 304 stainless steel.� The base is 1.�25mm thick and securely attaches to wall with stainless steel screws.� Cover is 0.�8mm thick.�
UNIVERSALGrab Bars / Towel Rings / Hygienic Bag Dispensers
402[15 13/16"]
216[8 1/2"]
200
[7 7
/8"]
140
[5 1
/2"]
95
[3 3/4"]
22
[7/8"]
82
04.131Tissue Dispenser Wall Mounted
04.131-30 Inox Bright
04.131-00 Inox Satin
04.331-30 Inox Bright
04.331-00 Inox Satin
Tissue Dispenser is manufactured completely from AISI 304 stainless steel.� Base is 1.�5mm thick and connects to the front plate with solid stainless steel rivets.� The base securely attaches to wall with stainless steel screws.�
04.331Tissue Dispenser Recessed
Recessed Tissue Dispenser is manufactured completely from 1.�2mm thick AISI 304 stainless steel.� The front part is attached to the rear part with a stainless steel hinge, thus enabling it to open.� The rear part is recessed and securely attached to the wall with four stainless steel screws.� Required wall opening for recession: 29x14cm depth 6cm.�
05.109Serviette Disposal Bag Hook
05.109-01 Bright
Serviette Disposal Bag Hook is manufactured completely from solid brass.� It securely attaches to wall with exposed stainless steel screws.�
9[3/8"]
18[11/16"]
35
[1 3
/8"]
270[10 5/8"]
60[2 3/8"]
135
[5 5
/16"
]
284[11 3/16"]
310[12 3/16"]
132
[5 3
/16"
]15
5[6
1/8
"]
52[2 1/16"]
7[1/4"]
Hygienic Bag Dispensers / Tissue Dispensers
83
Bath Stool is manufactured from AISI 304 stainless steel and premium quality plastic.� Seat is premium quality plastic and supports are 18mm tube, 1mm thick.�
Bath Stool White
04.04110.001Portable Bathroom Hanging Stand is manufactured from brass and AISI 304 stainless steel.� Hooks and hanger are 12mm, 1mm thick and attach to 30mm 1.�5mm thick post.� Base is 1.�25mm thick and includes 10 Kg weight for improved stability of the stand.�
Bathroom Hanging Stand Portable
1605
[63
3/16
"]
255[10 1/16"]
10.001-01 Bright
10.001-21 Bright / Gold 04.041-30 Inox Bright
UNIVERSALPortable Stands / Bath Stools
300[11 13/16"]
410
[16
1/8"
]
300[11 13/16"]
84
04.055Bottle Opener Wall Mounted
04.055-30 Inox Bright
11.041-30 Inox Bright
Wall Mounted Bottle Opener is manufactured completely from AISI 304 stainless steel 1.�5mm thick.� It securely attaches to wall with two stainless steel screws.�
11.041Door Bumper Floor Mounted
Door Bumper is manufactured completely from AISI 304 stainless steel.� Base is 20mm diameter solid bar and securely attaches to floor with stainless steel screw.� Rubber ring is 40mm diameter.�
04.539Used Towels Basket
04.539-30 Inox Bright
Used Towels Basket is manufactured completely from AISI 304 stainless steel.� Frame is 16mm tube, 1.�2mm thick.� Internal Tubes is 12mm tube, 1mm thick and is mechanically attached to frame.�
440[17 5/16"]
260[10 1/4"]
475
[18
11/1
6"]
65[2
9/1
6"]
47[1 7/8"]
25[1"]
40[1 9/16"]
38[1
1/2"
]
40[1 9/16"]
Used Towels Baskets / Bottle Openers / Door Bumpers
85
05.057Clothes Line Retractable
05.057-30 Inox Bright
04.124-30 Inox Bright
04.124-00 Inox Satin
Clothes Line is manufactured from AISI 304 stainless steel.� Cover is 1mm thick.� Concealed mounting flange is 1.�25mm thick, securely attached to wall with stainless steel screws and locks with cover with stainless steel screw.� High strength clothes line, 270cm long, mounts to 1mm thick locking flange and locks with locking screw.� Locking flange mounts to wall with exposed stainless steel screws.�
04.124Shampoo Bottle Holder Corner
Corner Shampoo Bottle Holder is manufactured completely from stainless steel AISI 304.� Shampoo bottle holder is 4mm solid round and is mechanically attached into orthogonal 15x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is securely attached to wall with exposed stainless steel screws.�
04.025Shower Rail
04.025-30 Inox Bright
Shower Rail is manufactured from AISI 304 stainless steel and solid brass.� Rail is 18mm (11/16) tube, 1mm thick (20 gauge) and is mechanically attached into solid brass rail supports, with no welding providing a secure and aesthetically correct attachment.� Rail supports are attached to 2mm thick (14 gauge) mounting flange with stainless steel screws.� Sliding shower hook is solid brass.� It slides and stops in position by means of stainless steel compression springs without locking screw.� Concealed mounting flange is 2mm thick
stainless steel and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
All parts are metallic.� The shower head stops at the desired position with the use of an automatic brake, without any screws.�
760
[29
15/1
6"]
58[2 5/16"]
80[3 1/8"]
90[3 9/16"]
30[1 3/16"]
66[2
5/8
"]33
[1 5/16"]9
[3/8"]
165[6 1/2"]
165
[6 1
/2"]
90[3
9/1
6"]
UNIVERSALShower Rails / Clothes Lines / Soap and Sponge Holders
86
03.007Soap Dish Recessed
04.024-30 Inox Bright
04.024-00 Inox Satin
03.007-30 Inox Bright
03.007-00 Inox Satin
11.114-30 Inox Bright
Recessed Soap Dish is manufactured completely from AISI 304 stainless steel.� Shell is 1mm thick and lip is 1mm thick.�
Required wall opening for recession: 13x13cm depth 5cm.�
11.114Soap Dish Table Top
Soap Dish is manufactured completely from AISI 304 stainless steel.� Brackets are 20mm diameter solid bar and are joined with 4mm diameter solid bar soap holder with no welding providing a secure and aesthetically correct attachment.� Soap holder is satin crystal.�
04.024Sponge Holder Corner
Corner Sponge Holder is manufactured completely from stainless steel AISI 304.� Sponge holder is 4mm solid round and is mechanically attached into orthogonal 15x6mm frame, with no welding providing a secure and aesthetically correct attachment.� Frame is securely attached to wall with exposed stainless steel screws.�
165[6 1/2"]
165
[6 1
/2"]
30[1
3/1
6"]
157[6 3/16"]
157
[6 3
/16"
]
125
[4 1
5/16
"]
45[1 3/4"]
28[1 1/8"]
160
[6 5/16"]
51 [2"]
94
[3 1
1/16
"]
Soap and Sponge Holders
87
05.439 5.�5 litre
Waste Bin With Lid
05.339-30 Inox Bright
05.339-00 Inox Satin
05.439-30 Inox Bright
05.439-00 Inox Satin
05.739-30 Inox Bright
05.739-00 Inox Satin
Waste Bin with Lid is manufactured completely from AISI 304 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.�
05.739 12 litre
Waste Bin With Lid
Waste Bin with Lid is manufactured completely from AISI 430 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.�
05.339 3 litre
Waste Bin With Lid
Waste Bin with Lid is manufactured completely from AISI 430 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.�
200[7 7/8"]
280[11"]
285
[11
1/4"
]
UNIVERSALWaste Bins
170
[6 11/16"]
235
[9 1/4"]
230
[9 1
/16"
]
250
[9 13/16"]
315
[12 3/8"]
395
[15
9/16
"]
88
05.839-30 Inox Bright
05.839-00 Inox Satin
05.939-30 Inox Bright
05.939-00 Inox Satin
Waste Bin with Lid is manufactured completely from AISI 430 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.�
Waste Bin with Lid is manufactured completely from AISI 430 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.�
Waste Bin With Lid Waste Bin With Lid
05.839 20 litre 05.939 30 litre
290
[11 7/16"]
355
[14"]
440
[17
5/16
"]
290
[11 7/16"]
355
[14"]
640
[25
3/16
"]
Waste Bins
89
05.151 12 litre
Waste Bin
05.437-30 Inox Bright
05.427-00 Inox Satin
05.151-30 Inox Bright
05.149-00 Inox Satin
Waste bin is manufactured completely from AISI 430 Stainless Steel 0.�8mm thick.�
05.149 12 litre
Waste Bin With Bag Ring
Waste bin is manufactured completely from AISI 430 Stainless Steel 0.�8mm thick.�
05.437 6 litre
Waste Bin With Lid, Rectangular
Waste Bin with Lid is manufactured completely from AISI 430 stainless steel.� Bin is 0.�6mm thick and attaches to 0.�8mm thick lid with stainless steel hinge.� Removable bin is plastic.� Foot pedal and opening mechanism is stainless steel.� 200
[7 7/8"]
280
[11"]
295
[11
5/8"
]
230[9 1/16"]
308
[12
1/8"
]
240[9 7/16"]
290
[11
7/16
"]
UNIVERSALWaste Bins
90
05.239 9 litre
Waste Bin Metallic
05.139-02 White
05.239-02 White
05.851-30 Inox Bright
Waste bin is manufactured completely from anodized aluminum 1.�5mm thick.�
05.851 9 litre
Waste Bin Perforated
Waste bin is manufactured completely from AISI 430 Stainless Steel 0.�8mm thick.�
05.139 5.�7 litre
Waste Bin Metallic
Waste bin is manufactured completely from anodized aluminum 1.�5mm thick.�
200[7 7/8"]
150[5 7/8"]
240
[9 7
/16"
]
240[9 7/16"]
190[7 1/2"]
255
[10
1/16
"]
195[7 11/16"]
285
[11
1/4"
]
Waste Bins
91
MIRRORS COLLECTION
BRIGHTPages 94-113
FRAMEPages 114-121
PANELPages 122-127
HEATPages 136-139
DECOPages 128-131
ZOOMPages 132-135
MIRRORS COLLECTION
94
BRIGHT Mirror and light
Mirrors with lighting elements.� An all-in-one solution suitable for any environment.� Available with or without frame.�
WITHOUT FRAME
WITH FRAME
26.001 70 x 70 cmWith 1 x 24w Horizontal Light
26.002 70 x 70 cmWith 2 x 24w Vertical Lights
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.001-00 26.002-00
BRIGHTMirrors Illuminated Without Frame
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
695
[27 3/8"]
695
[27
3/8"
]
695
[27 3/8"]
695
[27
3/8"
]
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
96
26.021 70 x 70 cmWith 1 x 24w Horizontal Light (Square)
26.022 70 x 70 cmWith 2 x 24w Vertical Lights (Square)
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.021-00 26.022-00
695
[27 3/8"]
695
[27
3/8"
]
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
695
[27 3/8"]
695
[27
3/8"
]
Mirrors Illuminated Without Frame
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
97
BRIGHTMirrors Illuminated Without Frame
26.003 70 x 100 cmWith 1 x 24w Horizontal Light
26.004 70 x 100 cmWith 2 x 39w Vertical Lights
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.003-00 26.004-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
695
[27 3/8"]
995
[39
3/16
"]
695
[27 3/8"]
995
[39
3/16
"]
98
Mirrors Illuminated Without Frame
26.005 100 x 70 cmWith 1 x 39w Horizontal Light
26.006 100 x 70 cmWith 2 x 24w Vertical Lights
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.005-00 26.006-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
995
[39 3/16"]
695
[27
3/8"
]
995
[39 3/16"]
695
[27
3/8"
]
99
BRIGHT
26.023 70 x 100 cmWith 1 x 24w Horizontal Light (Square)
26.024 70 x 100 cmWith 2 x 39w Vertical Lights (Square)
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.023-00 26.024-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
695
[27 3/8"]
995
[39
3/16
"]
695
[27 3/8"]
995
[39
3/16
"]
Mirrors Illuminated Without Frame
100
26.025 100 x 70 cmWith 1 x 39w Horizontal Light (Square)
26.026 100 x 70 cmWith 2 x 24w Vertical Lights (Square)
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.025-00 26.026-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Mirrors Illuminated Without Frame
995
[39 3/16"]
695
[27
3/8"
]
995
[39 3/16"]
695
[27
3/8"
]
101
BRIGHTMirrors Illuminated Without Frame
26.009 120 x 70 cmWith 1 x 39w Horizontal Lightand 2 x 39w Vertical Lights
26.029 120 x 70 cmWith 1 x 39w Horizontal Lightand 2 x 39w Vertical Lights (Square)
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W and one 39W fluorescent lamp and two electronic ballasts (one 2x24W and one 1x39W) with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W and one 39W fluorescent lamp and two electronic ballasts (one 2x24W and one 1x39W) with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.009-00 26.029-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
1195
[47 1/16"]
695
[27
3/8"
]
1195
[47 1/16"]
695
[27
3/8"
]
102
Mirrors Illuminated Without Frame
26.007 100 x 100 cmWith 1 x 39w Horizontal Light
26.008 100 x 100 cmWith 2 x 39w Vertical Lights
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.007-00 26.008-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
995
[39 3/16"]
995
[39
3/16
"]
995
[39 3/16"]
995
[39
3/16
"]
103
BRIGHTMirrors Illuminated Without Frame
26.027 100 x 100 cmWith 1 x 39w Horizontal Light (Square)
26.028 100 x 100 cmWith 2 x 39w Vertical Lights (Square)
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror plain with light is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror Plain Mirror Plain
26.027-00 26.028-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
995
[39 3/16"]
995
[39
3/16
"]
995
[39 3/16"]
995
[39
3/16
"]
104
Mirrors Illuminated With Frame
27.001 70 x 70 cmWith 1 x 24w Horizontal Light
27.002 70 x 70 cmWith 2 x 24w Vertical Lights
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.001-30 Inox Bright
27.001-00 Inox Satin
27.002-30 Inox Bright
27.002-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
700
[27 9/16"]
700
[27
9/16
"]
700
[27 9/16"]
700
[27
9/16
"]
105
BRIGHTMirrors Illuminated With Frame
27.021 70 x 70 cmWith 1 x 24w Horizontal Light (Square)
27.022 70 x 70 cmWith 2 x 24w Vertical Lights (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.021-30 Inox Bright
27.021-00 Inox Satin
27.022-30 Inox Bright
27.022-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
700
[27 9/16"]
700
[27
9/16
"]
700
[27 9/16"]
700
[27
9/16
"]
106
Mirrors Illuminated With Frame
27.003 70 x 100 cmWith 1 x 24w Horizontal Light
27.004 70 x 100 cmWith 2 x 39w Vertical Lights
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.003-30 Inox Bright
27.003-00 Inox Satin
27.004-30 Inox Bright
27.004-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
700
[27 9/16"]
1000
[39
3/8"
]
700
[27 9/16"]
1000
[39
3/8"
]
107
BRIGHTMirrors Illuminated With Frame
27.005 100 x 70 cmWith 1 x 39w Horizontal Light
27.006 100 x 70 cmWith 2 x 24w Vertical Lights
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.005-30 Inox Bright
27.005-00 Inox Satin
27.006-30 Inox Bright
27.006-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
1000
[39 3/8"]
700
[27
9/16
"]
1000
[39 3/8"]
700
[27
9/16
"]
108
Mirrors Illuminated With Frame
27.023 70 x 100 cmWith 1 x 24w Horizontal Light (Square)
27.024 70 x 100 cmWith 2 x 39w Vertical Lights (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 24W fluorescent lamp and electronic ballast 1x24W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.023-30 Inox Bright
27.023-00 Inox Satin
27.024-30 Inox Bright
27.024-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
700
[27 9/16"]
1000
[39
3/8"
]
700
[27 9/16"]
1000
[39
3/8"
]
109
BRIGHTMirrors Illuminated With Frame
27.025 100 x 70 cmWith 1 x 39w Horizontal Light (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror With Frame
27.025-30 Inox Bright
27.025-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
1000
[39 3/8"]
700
[27
9/16
"]
27.026 100 x 70 cmWith 2 x 24w Vertical Lights (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W fluorescent lamp and electronic ballast 2x24W with 220V - 240V voltage.�
Mirror With Frame
27.026-30 Inox Bright
27.026-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�295-00
1000
[39 3/8"]
700
[27
9/16
"]
110
Mirrors Illuminated With Frame
27.009 120 x 70 cmWith 1 x 39w Horizontal LightAnd 2 x 39w Vertical Lights
27.029 120 x 70 cmWith 1 x 39w Horizontal LightAnd 2 x 39w Vertical Lights (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W and one 39W fluorescent lamp and two electronic ballasts (one 2x24W and one 1x39W) with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 24W and one 39W fluorescent lamp and two electronic ballasts (one 2x24W and one 1x39W) with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.009-30 Inox Bright
27.009-00 Inox Satin
27.029-30 Inox Bright
27.029-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
1200
[47 1/4"]
700
[27
9/16
"]
1200
[47 1/4"]
700
[27
9/16
"]
111
BRIGHTMirrors Illuminated With Frame
27.007 100 x 100 cmWith 1 x 39w Horizontal Light
27.008 100 x 100 cmWith 2 x 39w Vertical Lights
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.007-30 Inox Bright
27.007-00 Inox Satin
27.008-30 Inox Bright
27.008-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
1000
[39 3/8"]
1000
[39
3/8"
]
1000
[39 3/8"]
1000
[39
3/8"
]
112
Mirrors Illuminated With Frame
27.027 100 x 100 cmWith 1 x 39w Horizontal Light (Square)
27.028 100 x 100 cmWith 2 x 39w Vertical Lights (Square)
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes a T5 39W fluorescent lamp and electronic ballast 1x39W with 220V - 240V voltage.�
Mirror with frame and light is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.� Mirror includes two T5 39W fluorescent lamp and electronic ballast 2x39W with 220V - 240V voltage.�
Mirror With Frame Mirror With Frame
27.027-30 Inox Bright
27.027-00 Inox Satin
27.028-30 Inox Bright
27.028-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
Use the following mirror heater to convert to anti-fog mirror: 10.�395-00
1000
[39 3/8"]
1000
[39
3/8"
]
1000
[39 3/8"]
1000
[39
3/8"
]
113
MIRRORS COLLECTION
114
SIDE FRAME
FRAME Portrait yourself
Mirrors with frames suitable for any environment.� All mirrors can be installed either horizontally or vertically without modification.� Choose among the following four different stainless steel frames.�
INCLINED FRAME
NARROW FRAME
WIDE FRAME
02.623 60 x 80 cm 02.823 70 x 90 cm
Mirror with inclined frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror with inclined frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror With Inclined Frame Mirror With Inclined Frame
02.623-30 Inox Bright
02.623-00 Inox Satin
02.823-30 Inox Bright
02.823-00 Inox Satin
600[23 5/8"]
800
[31
1/2"
]
700[27 9/16"]
900
[35
7/16
"]
FRAMEMirrors With Inclined Frame
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00, 10.�395-00
116
02.723 70 x 70 cm 02.923 80 x 100 cm
Mirror with inclined frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror with inclined frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror With Inclined Frame Mirror With Inclined Frame
02.723-30 Inox Bright
02.723-00 Inox Satin
02.923-30 Inox Bright
02.923-00 Inox Satin
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00, 10.�395-00
700[27 9/16"]
700
[27
9/16
"]
800[31 1/2"]
1000
[39
3/8"
]
Mirrors With Inclined Frame
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�395-00
117
02.124-30 Inox Bright
02.124-00 Inox Satin
02.224-30 Inox Bright
02.224-00 Inox Satin
02.324-30 Inox Bright
02.324-00 Inox Satin
FRAMEMirrors With Narrow Frame
02.124 45 x 80 cmWith 13mm Frame
02.224 45 x 100 cmWith 13mm Frame
02.324 45 x 120 cmWith 13mm Frame
Mirror with 13mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Mirror with 13mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Mirror with 13mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Mirror With Narrow Frame
Mirror With Narrow Frame
Mirror With Narrow Frame
450[17 11/16"]
800
[31
1/2"
]
450[17 11/16"]
1000
[39
3/8"
]
450[17 11/16"]
1200
[47
1/4"
]
118
02.230-30 Inox Bright
02.230-00 Inox Satin
02.130-30 Inox Bright
02.130-00 Inox Satin
02.330-30 Inox Bright
02.330-00 Inox Satin
Mirrors With Side Frame
02.230 55 x 100 cm
02.130 55 x 80 cm
02.330 55 x 120 cm
Mirror with side frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Mirror with side frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Mirror with side frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Mirror With Side Frame
Mirror With Side Frame
Mirror With Side Frame
1000
[39
3/8"
]
550
[21 5/8"]
800
[31
1/2"
]
550
[21 5/8"]
1200
[47
1/4"
]
550
[21 5/8"]
119
FRAMEMirrors With Wide Frame
Mirror with 33mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror with 33mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror With Wide Frame Mirror With Wide Frame
02.422-30 Inox Bright
02.422-00 Inox Satin
02.522-30 Inox Bright
02.522-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
400[15 3/4"]
600
[23
5/8"
]
02.422 40 x 60 cmWith 33mm Frame
02.522 50 x 60 cmWith 33mm Frame
600
[23
5/8"
]
500[19 11/16"]
120
Mirrors With Wide Frame
Mirror with 33mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror with 33mm frame is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror With Wide Frame Mirror With Wide Frame
02.722-30 Inox Bright
02.722-00 Inox Satin
02.822-30 Inox Bright
02.822-00 Inox Satin
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
02.722 50 x 70 cmWith 33mm Frame
02.822 60 x 80 cmWith 33mm Frame
500[19 11/16"]
700
[27
9/16
"]
800
[31
1/2"
]
600
[23 5/8"]
121
MIRRORS COLLECTION
122
PANEL Simply ever-lasting
Plain mirrors with stainless steel mounting plates for easy installation on the wall.� All mirrors can be installed either horizontally or vertically without modification.�
WITHOUT FRAME
10.024-00
10.025-00
10.026-00
10.024 40 x 60 cm
10.025 45 x 80 cm
10.026 45 x 100 cm
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.� Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Mirror Plain
Mirror Plain
Mirror Plain
395[15 9/16"]
595
[23
7/16
"]
445[17 1/2"]
795
[31
5/16
"]
445[17 1/2"]
995
[39
9/16
"]
PANELMirrors Without Frame
124
445[17 1/2"]
1195
[47
1/16
"]
Mirrors Without Frame
10.023 35 x 90 cm 10.027 45 x 120 cm
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror Plain Mirror Plain
10.023-00 10.027-00
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
345[13 9/16"]
895
[35
1/4"
]
125
PANELMirrors Without Frame
10.028 50 x 60 cm 10.032 70 x 90 cm
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Mirror Plain Mirror Plain
10.028-00 10.032-00
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
495[19 1/2"]
595
[23
7/16
"]
695[27 3/8"]
895
[35
1/4"
]
126
Mirrors Without Frame
10.029-00
10.030-00
10.031-00
10.029 50 x 70 cm
10.030 60 x 60 cm
10.031 60 x 80 cm
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�
Plain Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Specially designed mounting system enables the mirror to be installed either vertically or horizontally without modification.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Mirror Plain
Mirror Plain
Mirror Plain
495[19 1/2"]
695
[27
3/8"
]
595[23 7/16"]
595
[23
7/16
"]
595[23 7/16"]
795
[31
5/16
"]
127
MIRRORS COLLECTION
128
DECO Traced in style
Mirrors with embossed decoration without frame with stainless steel mounting plates for easy installation on the wall.�
ENGRAVEDDECORATION
DECOMirrors Plain With Decoration
10.010 45 x 65 cm
10.011 45 x 65 cm
10.021 65 x 85 cm
Paros Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Naxos Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.�Use the following mirror heater to convert to anti-fog mirror: 10.�195-00
Sifnos Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.�Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Mirror Paros
Mirror Naxos
Mirror Sifnos
10.010-00
10.011-00
10.021-00
450
[17 11/16"]
650
[25
9/16
"]
450
[17 11/16"]
650
[25
9/16
"]
650
[25 9/16"]
850
[33
7/16
"]
130
Mirrors Plain With Decoration
10.020 65 x 85 cm 10.051 85 x 85 cm
Santorini Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.�
Tinos Mirror is manufactured from AISI 304 stainless steel and crystal.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to stainless steel base with special double-sided adhesive tape and silicon.� Mirror mounts on wall with stainless steel screws.�
Mirror Santorini Mirror Tinos
10.020-00 10.051-00
650
[25 9/16"]
850
[33
7/16
"]
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00
Use one of the following mirror heaters to convert to anti-fog mirror: 10.�195-00, 10.�295-00, 10.�395-00
850
[33 7/16"]
850
[33
7/16
"]
131
MIRRORS COLLECTION
132
ZOOM Zoom in you
Magnifying mirrors.� Wall mounted or free standing, with or without illumination.�
3:1 OPTICAL ZOOM
190[7 1/2’’]
190
[7 1
/2’’]
350[13 3/4’’]
ZOOMMirrors Magnifying
05.092 05.491Wall mounted Magnifying Mirror with Light is manufactured from AISI 304 stainless steel and crystal.� Magnifying mirror (x3) is 3mm crystal and attaches to frame.� Support brackets use pivot hinges and attach to mounting base with stainless steel screws.� Mounting flange attach to wall with stainless steel screws.�
Wall mounted Magnifying Mirror is manufactured from AISI 304 stainless steel, aluminium and crystal.� Mirror is double-sided, one magnifying (x3) and the other normal.� Magnifying and normal mirror are 3mm crystal and attach to aluminium frame.� Frame attaches to a semi-rounded frame by two stainless steel pivots, thus allowing the mirror to rotate freely by the horizontal axis.� Frame attaches to stainless steel 16mm, 1.�2mm thick support arm by stainless steel pivot rotating freely to the vertical axis.� Support arm is mechanically pressed, with no welding, into stainless steel pivot supports that attach to 2mm thick mounting flange with stainless steel screws.� Support arm may rotate by 180° horizontally.� Concealed mounting flange is 1.�25mm thick and securely attaches to wall with stainless steel screws and locks with mounting flange with stainless steel locking screw.�
Mirror Illuminated, Double SwivelWall Mounted, Magnifying, With Light Φ190
Mirror Single SwivelWall Mounted, Magnifying
05.092-30 Inox Bright 05.491-01 Bright
203[8’’]
251[9 7/8’’]
252
[9 1
5/16
’’]
134
Mirrors Magnifying
05.691Free Standing Magnifying Mirror is manufactured from AISI 304 stainless steel, aluminium and crystal.� Mirror is double-sided, one magnifying (x3) and the other normal.� Magnifying mirror and normal mirror are 3mm (3/16) crystal and attach to aluminium frame.� Frame attaches to semi-rounded frame by two stainless steel pivots, thus allowing the mirror to rotate freely by the horizontal axis.� The frame attaches to 12mm diameter stainless steel support post with stainless steel screw.� The post is mechanically assembled to a 2mm thick base, which includes 5Kgs weight for improved stability.�
Mirror Table TopFree Standing, Magnifying
05.691-01 Bright
212[8 3/8’’]
160[6 5/16’’]
400
[15
3/4’
’]
135
MIRRORS COLLECTION
136
HEAT Steam resistance
Mirror heaters that can be installed on the back of all our mirrors.� They keep the mirror clear after a hot bath or shower.� Available in four standard dimensions with different power options.�
HEAT effect
STEAMeffect
HEATMirror Heaters
274[10 13/16’’]
274
[10
13/1
6’’]
Mirror heater may be ordered seperatelly from the mirror and can easily installed on site.� You should never cut it to smaller dimensions because you destruct the insulation.�
Mirror heater may be ordered seperatelly from the mirror and can easily installed on site.� You should never cut it to smaller dimensions because you destruct the insulation.�
274[10 13/16’’]
574
[22
5/8’
’]
10.195 274 x 274 mm15w / 230v IP44
10.295 274 x 574 mm25w / 230v IP44
Mirror Heater is manufactured from a double insulated foil-element with a surface layer of polyester and a carbon-based heating element.� One side is self adhesive for easy installation.� Technical specifications: Rated voltage: 230V, Power 15W, Protection class: IP44, Connection cable: 2 m
Mirror Heater is manufactured from a double insulated foil-element with a surface layer of polyester and a carbon-based heating element.� One side is self adhesive for easy installation.� Technical specifications: Rated voltage: 230V, Power 25W, Protection class: IP44, Connection cable: 2 m
Mirror Heater Mirror Heater
10.195-00 10.295-00
138
Mirror Heaters
10.395 524 x 524 mm50w / 230v IP44
10.495 1024 x 524 mm100w / 230v IP44
Mirror Heater is manufactured from a double insulated foil-element with a surface layer of polyester and a carbon-based heating element.� One side is self adhesive for easy installation.� Technical specifications: Rated voltage: 230V, Power 50W, Protection class: IP44, Connection cable: 2 m
Mirror Heater is manufactured from a double insulated foil-element with a surface layer of polyester and a carbon-based heating element.� One side is self adhesive for easy installation.� Technical specifications: Rated voltage: 230V, Power 100W, Protection class: IP44, Connection cable: 2 m
Mirror Heater Mirror Heater
10.395-00 10.495-00
Mirror heater may be ordered seperatelly from the mirror and can easily installed on site.� You should never cut it to smaller dimensions because you destruct the insulation.�
Mirror heater may be ordered seperatelly from the mirror and can easily installed on site.� You should never cut it to smaller dimensions because you destruct the insulation.�
524[20 5/8’’]
524
[20
5/8’
’]
524[20 5/8’’]
1024
[40
5/16
’’]
139
WATER SCREENINGELEMENTS
RODSPages 142-153
CURTAINSPages 154-157
SCREENSPages 158-163
WATER SCREENINGELEMENTS
142
RODS Straight, round and corner
Curtain rods made of stainless steel, with secure wall mounting system.� Available in four shapes (straight, round, arc shaped and corner) and variety of dimension, in order to meet any requirement.� Special shapes and dimensions available on request.�
05.161 120 cm, Φ25 05.261 140 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod Straight Curtain Rod Straight
05.161-30 Inox Bright
05.161-00 Inox Satin
05.261-30 Inox Bright
05.261-00 Inox Satin
1200[48"]
35[1
3/8
"]
RODSCurtain Rods Straight
Suitable for overall wall to wall distance of up to 120cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
Suitable for overall wall to wall distance of up to 140cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
1400[56"]
35[1
3/8
"]
144
05.361 160 cm, Φ25 05.461 180 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod Straight Curtain Rod Straight
05.361-30 Inox Bright
05.361-00 Inox Satin
05.461-30 Inox Bright
05.461-00 Inox Satin
Curtain Rods Straight
Suitable for overall wall to wall distance of up to 160cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
Suitable for overall wall to wall distance of up to 180cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
1600[64"]
35[1
3/8
"]
1800[72"]
35[1
3/8
"]
145
05.561 200 cm, Φ25 05.661 220 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Curtain Rod Straight Curtain Rod Straight
05.561-30 Inox Bright
05.561-00 Inox Satin
05.661-30 Inox Bright
05.661-00 Inox Satin
Suitable for overall wall to wall distance of up to 200cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
Suitable for overall wall to wall distance of up to 220cm.� For mounting to a smaller length, you should measure the overall wall to wall distance (L) and cut the tube 1,5cm less (L-1,5cm).�
RODSCurtain Rods Straight
2000[80"]
35[1
3/8
"]
2200[88"]
35[1
3/8
"]
146
05.465-30 Inox Bright
05.465-00 Inox Satin
05.565-30 Inox Bright
05.565-00 Inox Satin
05.665-30 Inox Bright
05.665-00 Inox Satin
05.465 180 cm, Φ25
05.565 200 cm, Φ25
05.665 220 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Suitable for overall wall to wall distance of up to 180cm.� Curtain rod may be cut at a maximum of 10cm from each side.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Suitable for overall wall to wall distance of up to 200cm.� Curtain rod may be cut at a maximum of 10cm from each side.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick.� It mounts on the wall with two pairs of brackets (one concealed and one visible) that are securely attached with stainless steel screws.�
Suitable for overall wall to wall distance of up to 220cm.� Curtain rod may be cut at a maximum of 10cm from each side.�
Curtain Rod Arc Shaped
Curtain Rod Arc Shaped
Curtain Rod Arc Shaped
Curtain Rods Arc Shaped
1800[70 7/8"]
200
[7 7
/8"]
2000[78 3/4"]
200
[7 7
/8"]
2200[86 5/8"]
200
[7 7
/8"]
147
05.162 70 x 70 cm, Φ25 05.262 75 x 75 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod Angled Curtain Rod Angled
05.162-30 Inox Bright
05.162-00 Inox Satin
05.262-30 Inox Bright
05.262-00 Inox Satin
RODSCurtain Rods Angled
700[28"]
700
[28"
]
750[30"]
750
[30"
]
148
05.362 80 x 80 cm, Φ25 05.462 90 x 90 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod Angled Curtain Rod Angled
05.362-30 Inox Bright
05.362-00 Inox Satin
05.462-30 Inox Bright
05.462-00 Inox Satin
Curtain Rods Angled
800[32"]
800
[32"
]
900[36"]
900
[36"
]
149
RODSCurtain Rods Angled
05.662 170 x 70 cm, Φ25 05.762 170 x 80 cm, Φ25
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod Angled Curtain Rod Angled
05.662-30 Inox Bright
05.662-00 Inox Satin
05.762-30 Inox Bright
05.762-00 Inox Satin
1700[68"]
1700
[68"
]
1700[68"]
800
[68"
]
150
Curtain Rods Round
05.164 80 x 80 cm, Φ25 05.264 90 x 90 cm, Φ25
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod Round Curtain Rod Round
05.164-30 Inox Bright
05.164-00 Inox Satin
05.264-30 Inox Bright
05.264-00 Inox Satin
800[31 1/2"]
800
[31
1/2"
]
Order must be accompanied by a drawing.� Order must be accompanied by a drawing.�
900[35 7/16"]
900
[35
7/16
"]
151
RODSCurtain Rods Round
05.364 100 x 100 cm, Φ25 05.464 110 x 110 cm, Φ25
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Curtain Rod Round Curtain Rod Round
05.364-30 Inox Bright
05.364-00 Inox Satin
05.464-30 Inox Bright
05.464-00 Inox Satin
Order must be accompanied by a drawing.� Order must be accompanied by a drawing.�
1000[39 3/8"]
1000
[39
3/8"
]
1100[43 5/16"]
1100
[43
5/16
"]
152
Curtain Rods Round
05.564-30 Inox Bright
05.564-00 Inox Satin
05.664-30 Inox Bright
05.664-00 Inox Satin
05.764-30 Inox Bright
05.764-00 Inox Satin
05.564 120 x 120 cm, Φ25
05.664 130 x 130 cm, Φ25
05.764 140 x 140 cm, Φ25
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Order must be accompanied by a drawing.�
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Order must be accompanied by a drawing.�
Round Curtain Rod is manufactured from AISI 304 stainless steel.� Rod is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Order must be accompanied by a drawing.�
Curtain Rod Round
Curtain Rod Round
Curtain Rod Round
1200[47 1/4"]
1200
[47
1/4"
]
1300
[51 3/16"]
1300
[51
3/16
"]
1400[55 1/8"]
1400
[55
1/8"
]
153
WATER SCREENINGELEMENTS
154
CURTAINS Divide with texture
Bathroom curtains made of polyester or PVC.� Available in two colors (white and beige) and big variety of dimension in order to meet any requirement.�
CURTAINSShower Curtains
54.101 W140 x H180 cm
54.201 W160 x H180 cm
54.301 W180 x H180 cm
54.401 W200 x H180 cm
54.501 W240 x H180 cm
54.601 W140 x H210 cm
Shower Curtain is manufactured from 100% polyester textile.� Hanging rings are high quality plastic.�
Shower Curtain Polyester White
54.101-02 White
54.301-02 White
54.601-02 White
54.201-02 White
54.401-02 White
54.701-02 White
54.501-02 White
54.801-02 White
1400[55 1/8’’]
1800
[70
7/8’
’]
1800[70 7/8’’]
1800
[70
7/8’
’]
1400[55 1/8’’]
2100
[82
11/1
6’’]
1600[63’’]
1800
[70
7/8’
’]
2000[78 3/4’’]
1800
[70
7/8’
’]
1600[63’’]
2100
[82
11/1
6’’]
2400[94 1/2’’]
2800
[70
7/8’
’]
1800[70 7/8’’]
2100
[82
11/1
6’’]
54.701 W160 x H210 cm
54.801 W180 x H210 cm
156
Shower Curtains
54.101 W140 x H180 cm
54.201 W160 x H180 cm
54.301 W180 x H180 cm
54.401 W200 x H180 cm
54.501 W240 x H180 cm
54.601 W140 x H210 cm
Shower Curtain is manufactured from 100% polyester textile.� Hanging rings are high quality plastic.�
Shower Curtain Polyester Beige
54.101-03 Beige
54.301-03 Beige
54.601-03 Beige
54.201-03 Beige
54.401-03 Beige
54.701-03 Beige
54.501-03 Beige
54.801-03 Beige
1400[55 1/8’’]
1800
[70
7/8’
’]
1800[70 7/8’’]
1800
[70
7/8’
’]
1400[55 1/8’’]
2100
[82
11/1
6’’]
1600[63’’]
1800
[70
7/8’
’]
2000[78 3/4’’]
1800
[70
7/8’
’]
1600[63’’]
2100
[82
11/1
6’’]
2400[94 1/2’’]
2800
[70
7/8’
’]
1800[70 7/8’’]
2100
[82
11/1
6’’]
54.701 W160 x H210 cm
54.801 W180 x H210 cm
157
WATER SCREENINGELEMENTS
158
SCREENS Divide with glass
Bath screens made from tempered glass, with stainless steel mounting system.� Available in four different dimensions, with or without border.� Choose between clear and frosted glass to control the visibility of the area.�
SCREENSBath Screens Fixed
56.632 60 x 140 cm 56.732 70 x 140 cm
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen Frosted Bath Screen Frosted
56.632-30 Inox Bright 56.732-30 Inox Bright
The frame is mounted with screws on the wall and with silicone on the bath tub.�
The frame is mounted with screws on the wall and with silicone on the bath tub.�
1400
[55
1/8"
]
600[23 5/8"]
1400
[55
1/8"
]
700[27 9/16"]
160
Bath Screens Fixed
56.832 80 x 140 cm 56.932 90 x 140 cm
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen Frosted Bath Screen Frosted
56.832-30 Inox Bright 56.932-30 Inox Bright
The frame is mounted with screws on the wall and with silicone on the bath tub.�
The frame is mounted with screws on the wall and with silicone on the bath tub.�
800[31 1/2"]
1400
[55
1/8"
]
900[35 7/16"]
1400
[55
1/8"
]
161
SCREENSBath Screens Fixed
56.631 60 x 140 cm 56.731 70 x 140 cm
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen Clear Bath Screen Clear
56.631-30 Inox Bright 56.731-30 Inox Bright
The frame is mounted with screws on the wall and with silicone on the bath tub.�
The frame is mounted with screws on the wall and with silicone on the bath tub.�
1400
[55
1/8"
]
600[23 5/8"]
1400
[55
1/8"
]
700[27 9/16"]
162
Bath Screens Fixed
56.831 80 x 140 cm 56.931 90 x 140 cm
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen is manufactured from AISI304 stainless steel and security glass.� The frame is manufactured from 1.�2mm thick stainless steel sheet and is securely attached to the wall with stainless steel screws and on the bathtub with silicone.� The screen is 8mm thick security crystal with beveled edges for safety.�
Bath Screen Clear Bath Screen Clear
56.831-30 Inox Bright 56.931-30 Inox Bright
The frame is mounted with screws on the wall and with silicone on the bath tub.�
The frame is mounted with screws on the wall and with silicone on the bath tub.�
800[31 1/2"]
1400
[55
1/8"
]
900[35 7/16"]
1400
[55
1/8"
]
163
BATHROOM EQUIPMENT FOR THE DISABLED
DSBPages 166-181
BATHROOM EQUIPMENT FOR THE DISABLED
166
DSB Civil duty
A full range of products, specially designed for the disabled.� All products are made from stainless steel tube.� The tube diameter is 25mm for easy grabing and the mounting system can support 400 kg.�
05.724 50 x 70 cm 05.041Tilting Mirror is manufactured from AISI 304 stainless steel and crystal.� Frame is manufactured from bended sheet with all edges constructed as safe edges for protection against injuries.� Frame parts and the mounting bases are mechanically assembled with no welding providing a secure and aesthetically correct attachment.� Mirror is 5mm thick crystal, silver plated, copper plated with varnish protection against corrosion, attached to base with special double-sided adhesive tape and silicon.� Frame mechanically attaches to solid stainless steel pivot which mounts to 2mm thick mounting flange.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Folding Shower Seat is manufactured from aluminum.� Seat is Epoxy coated aluminum and attaches to aluminum mounting flanges with stainless steel pivot.� Flanges securely attach to wall with stainless steel screws and are covered with ABS covers.�
Mirror Tilting Shower Seat Folding
05.724-30 Inox Bright 05.041-02 White
84[3 5/16’’]
700
[27
9/16
’’]
500[19 11/16’’]
646[25 7/16’’]
11o
315[12 3/8"]
330[13"]
100
[3 1
5/16
"]
340
[13
3/8"
]
Folding Shower Seat should sustain dead weight of 100Kg (220 pounds) provided that at least equal strength could sustain the wall or anchors to which it is attached.�
DSBMirrors / Bath Stools
168
80[3
1/8
’’]90
[3 9
/16’
’]
380[14 15/16’’]
05.315-30 Inox Bright
05.315 30 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
05.415-30 Inox Bright
05.415 40 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
80[3
1/8
’’]90
[3 9
/16’
’]
480[18 7/8’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bars
169
05.615-30 Inox Bright05.515-30 Inox Bright
05.515 50 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
80[3
1/8
’’]90
[3 9
/16’
’]
580[22 13/16’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
05.615 60 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
Grab Bars
80[3
1/8
’’]90
[3 9
/16’
’]
680[24 3/4’’]
DSB
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
170
05.915-30 Inox Bright 05.015-30 Inox Bright
05.915 90 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
05.015 120 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight
Grab Bars
80[3
1/8
’’]90
[3 9
/16’
’]
980[38 9/16’’]
80[3
1/8
’’]
1280[50 3/8’’]
90[3
9/1
6’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
171
Grab BarsDSB
05.350-30 Inox Bright
05.350 30 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
80[3
1/8
’’]90
[3 9
/16’
’]
380[14 15/16’’]
05.450-30 Inox Bright
05.450 40 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
80[3
1/8
’’]90
[3 9
/16’
’]
480[18 7/8’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
172
Grab Bars
05.650-30 Inox Bright05.550-30 Inox Bright
05.650 60 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
05.550 50 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
80[3
1/8
’’]90
[3 9
/16’
’]
580[22 13/16’’]
680[26 3/4’’]
80[3
1/8
’’]90
[3 9
/16’
’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
173
Grab BarsDSB
05.950-30 Inox Bright 05.050-30 Inox Bright
05.950 90 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
05.050 120 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Straight, Anti-Slip
80[3
1/8
’’]90
[3 9
/16’
’]
980[38 9/16’’]
80[3
1/8
’’]90
[3 9
/16’
’]
1280[50 3/8’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
174
05.122 05.125Swing Up Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into solid stainless steel pivot.� Pivot attaches to 2mm thick mounting flange with 14mm diameter solid stainless steel bar.� Mounting flange is securely attached to wall with four exposed stainless steel screws.�
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� side support can be easily mounted left or right without modification.�
Grab Bar Swing Up Grab Bar Horizontal
05.122-30 Inox Bright 05.125-30 Inox Bright
Grab Bars
80[3 1/8’’]
650[25 9/16’’]
744
[29
5/16
’’]18
0[7
1/1
6’’]
Grab bar should sustain dead weight of 180Kg (400 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 180Kg (400 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
205
[8 1
/16’
’]
230[9 1/16’’]
650[25 9/16’’]
175
Grab BarsDSB
05.225 05.222Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� side support can be easily mounted left or right without modification.� Paper Holder is manufactured completely from AISI 304 stainless steel 4mm thick.� It securely attaches to the grab bar with stainless steel screws.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Swing Up Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into solid stainless steel pivot.� Pivot attaches to 2mm thick mounting flange with 14mm diameter solid stainless steel bar.� Mounting flange is securely attached to wall with four exposed stainless steel screws.� Paper Holder is manufactured completely from AISI 304 stainless steel 4mm thick.� It securely attaches to the grab bar with stainless steel screws.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Grab Bar Horizontal, With Paper Holder Grab Bar Swing Up, With Paper Holder
05.225-30 Inox Bright 05.222-30 Inox Bright
Grab bar should sustain dead weight of 180Kg (400 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 180Kg (400 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
263
[10
5/16
’’]
230[9 1/16’’]
650[25 9/16’’]
80[3 1/8’’]
827
[32
9/16
’’]18
0[7
1/1
6’’]
176
05.020 150 x 15 cm 05.021 190 x 15 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall and floor with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Wall Mounted Grab Bar Wall and Floor Mounted
05.020-30 Inox Bright 05.021-30 Inox Bright
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bars
80[3 1/8’’]
150[5 7/8’’]
1940
[76
3/8’
’]
80[3 1/8’’]
150[5 7/8’’]
1580
[62
3/16
’’]
177
Grab BarsDSB
05.117-30 Inox Bright
05.217-30 Inox Bright
05.120-30 Inox Bright
05.117 40 x 80 cm
05.217 40 x 80 cm
05.120 40 x 80 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.� Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab Bar L-Shaped, Left
Grab Bar L-Shaped, Right
Grab Bar L-Shaped, Anti-Slip, Left
480[18 7/8’’]
880
[34
5/8’
’]
90[3 9/16’’]
480[18 7/8’’]
880
[34
5/8’
’]90
[3 9/16’’]88
0[3
4 5/
8’’]
90[3 9/16’’]
480[18 7/8’’]
178
05.220-30 Inox Bright 05.118-30 Inox Bright
05.220 40 x 80 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar L-Shaped, Anti-Slip, Right
05.118 70 x 70 cm
Wall and Floor Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall and floor with stainless steel screws and covered with the 0.�8mm thick flange cover.� side support can be easily mounted left or right without modification.� Paper Holder is manufactured completely from AISI 304 stainless steel 4mm thick.� It securely attaches to the grab bar with stainless steel screws.� Paper roll is AISI 304 Stainless Steel tube, 25mm diameter, with stainless steel spring to facilitate insertion.�
Grab Bar Wall and Floor mounted, With Paper Holder
Grab Bars
90[3 9/16’’]
480[18 7/8’’]
880
[34
5/8’
’]
230[9 1/16’’]
700[27 9/16’’]
700
[27
9/16
’’]
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
179
05.018-30 Inox Bright 05.219-30 Inox Bright
05.018 70 x 70 cm
Wall and Floor Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall and floor with stainless steel screws and covered with the 0.�8mm thick flange cover.� side support can be easily mounted left or right without modification.�
Grab Bar Wall and Floor mounted
05.219 80 x 80 x 80 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar L-Shaped, Angled, Right
Grab BarsDSB
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
700[27 9/16’’]
230[9 1/16’’]
700
[27
9/16
’’] 840[33 1/16’’]
840
[33
1/16
’’]88
0[3
4 5/
8’’]
180
05.026-30 Inox Bright05.119-30 Inox Bright
05.026 80 x 80 cm05.119 80 x 80 x 80 cm
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar is manufactured completely from AISI 304 stainless steel.� Grab bar is 25mm tube, 1.�5mm thick and is mechanically pressed into 2mm thick mounting flange, with no welding providing a secure and aesthetically correct attachment.� Mounting flange is securely attached to wall with stainless steel screws and covered with the 0.�8mm thick flange cover.�
Grab Bar Angled, SymmetricalGrab Bar L-Shaped, Angled, Left
Grab Bars
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
Grab bar is symmetrical.�
Grab bar should sustain dead weight of 400Kg (880 pounds) at any point for 5 minutes provided that at least equal strength could sustain the wall or anchors to which it is attached.�
880
[34
5/8’
’]84
0[3
3 1/
16’’]
840[33 1/16’’]
80[3
1/8
’’]
840[33 1/16’’]
840
[33
1/16
’’]
181
PUBLIC WASHROOMEQUIPMENT
PUBLICPages 184-191
PUBLIC WASHROOMEQUIPMENT
184
PUBLIC Common use
A full range of products for the public washroom All products are made from stainless steel and are available in wall mounted or full recessed version, specially designed for dry walls.�
30.118 500 ml 04.518 1200 ml
Vanity Liquid Soap Dispenser is manufactured from AISI 304 stainless steel and plastic.� The pump is manufactured from stainless steel and the internal mechanism of the pump is manufactured from high quality plastic and operates with stainless steel spring.� The container is manufactured from high quality plastic.�
Liquid Soap Dispenser is manufactured from AISI 304 stainless steel.� Container is 0.�8mm thick and is equipped with a transparent refill indicator.� The internal mechanism of the pump is manufactured from high quality platic and operates with stainless steel spring.� Dispenser is mounted to wall with 1.�2mm thick mounting flange and stainless steel screws.�
Liquid Soap Dispenser Vanity Mounted Liquid Soap Dispenser Wall Mounted
30.118-30 Inox Bright
04.518-30 Inox Bright
04.518-00 Inox Satin
67[2
5/8
"]30
0[1
1 13
/16"
]
79[3 1/16"]
53[2 1/16"]
185
[7 5
/16"
]
115[4 1/2"]
104[4 1/8"]
PUBLICLiquid Soap Dispensers
186
00.055 00.212 For Φ350 mm Rolls
Wall mounted Ashtray is manufactured completely from AISI 304 stainless steel.� Frame is 1.�2mm thick and attaches to 1.�2mm thick ashtray with stainless steel hinge.� Frame securely attaches to wall with stainless steel screws.� Ashtrays flips over for easy cleaning.�
Jumbo Roll Paper Dispenser is completely manufactured from 0.�8mm thick AISI 304 stainless steel.� It securely attaches to wall with two stainless steel screws.�
Ashtray Wall Mounted, Metallic Paper Dispenser Jumbo Roll
00.055-00 Inox Satin
00.212-30 Inox Bright
00.212-00 Inox Satin
100
[3 1
5/16
"]34
[1 5
/16"
]
123[4 13/16"]
260
10 1/4"
265
10 7
/16"
130
[5 1/8"]
Ashtrays / Paper Holders
187
00.139 25 litre 00.331 Capacity 300 C-fold Towels
Waste Receptacle is completely manufactured from0.�8mm thick AISI 304 stainless steel.� Capacity is 25lt.� It securely attaches to wall with two stainless steel screws.�
Paper Towel Dispenser is completely manufactured from 0.�8mm thick AISI 304 stainless steel.� Cover attaches to cabinet with stainless steel pivot and locks with concealed stainless steel lock.� Cover has slot that indicates refill time.� The capacity of the dispenser is 300 C-fold paper towels.� It securely attaches to wall with three stainless steel screws.�
Waste Receptacle Paper Towel Dispenser
00.139-30 Inox Bright
00.139-00 Inox Satin
00.331-30 Inox Bright
00.331-00 Inox Satin
Waste Receptacles / Paper Towel DispensersPUBLIC
330
[13"]
490
[19
5/16
"]
155
[6 1/8"]
335
[13
3/16
"]
268[10 9/16"]
103[4 1/16"]
188
52.022 With Photocell 2200 w 00.170Hand Dryer with Photocell is manufactured from 1.�2mm thick AISI 304 Stainless Steel.� Operation is automatic due to an electronic sensor.� Electrical Characteristics: Voltage: 220/240V Heating Element: 2100W Overall power absorption: 2200W Air flow: 4.�6 m3/min Noise Level: 61-67 dBA
Urinal Separator is manufactured completely from AISI 304 stainless steel.� Frame is 25mm tube, 1.�5mm thick and is mechanically attached to solid stainless steel brackets.� Panel is 2mm thick.� Separator is securely attached to wall with four exposed stainless steel screws.�
Hand Dryer Urinal Separator
52.022-30 Inox Bright
ARTH310HP
52.022-00 Inox Satin
ARTH310 00.170-00 Inox Satin
Hand Dryers / Urinal Separators
314[12 3/8"]
175[6 7/8"]
216
[8 1
/2"]
1085
[42
11/1
6"]
400[15 3/4"]60
[2 3/8"]
189
Paper Towel Dispensers / Waste Receptacles
00.160-30 Inox Bright
00.160-00 Inox Satin
00.360-30 Inox Bright
00.360-00 Inox Satin
00.160 Capacity 300 C-fold Towels
Recessed Paper Towel Dispenser is manufactured completely from 0.�8mm thick AISI 304 stainless steel.� Paper Towel Dispenser has a capacity of 300 C-fold paper towels.� The cover attaches to cabinet with stainless steel pivot and locks with concealed stainless steel lock.� The cover has a slot that indicates refill time.� The required wall opening for recession is 265 mm x 455 mm with a depth of 90 mm.�
Paper Towel Dispenser Recessed
00.360 Capacity 300 C-fold Towels - 9 litre
Recessed Paper Towel Dispenser and Waste Receptacle combination is manufactured completely from 0.�8mm thick AISI 304 stainless steel.� Paper Towel Dispenser has a capacity of 300 C-fold paper towels.� The cover attaches to cabinet with stainless steel pivot and locks with concealed stainless steel lock.� The cover has a slot that indicates refill time.� The Waste Receptacle is removable for easy cleaning.� The required wall opening for recession is 265 mm x 955 mm with a depth of 90 mm.�
Paper Towel Dispenser and Waste Receptacle Recessed
PUBLIC
300
260
90
87
485
445
300260
9087
985
945
190
Waste Receptacles
00.260-30 Inox Bright
00.260-00 Inox Satin
00.460-30 Inox Bright
00.460-00 Inox Satin
00.460 9 litre
Recessed Waste Receptacle with lid is manufactured completely from 0.�8mm thick AISI 304 stainless steel.� The Waste Receptacle is removable for easy cleaning.� The lid attaches to cabinet with stainless steel pivot.�The required wall opening for recession is 265 mm x 605 mm with a depth of 90 mm.�
Waste Receptacle Recessed, With Flap
00.260 9 litre
Recessed Waste Receptacle is manufactured completely from 0.�8mm thick AISI 304 stainless steel.� The Waste Receptacle is removable for easy cleaning.� The required wall opening for recession is 265 mm x 605 mm with a depth of 90 mm.�
Waste Receptacle Recessed
300
260
90
87
625
585
400
300
260
90
87
625
585
400
191