GSM-R 3.2 GTSOFTX3000 Configuration Manual V1.5(20111122)

GSM-R 3.2

GTSOFTX3000

Configuration Manual

Issue V1.5

Date 2011-11-22

HUAWEI TECHNOLOGIES CO., LTD.

Issue V1.4 (2011-5-16) Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd of 65

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation

of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this

document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel

free to contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

http://www.huawei.com/

mailto:[email protected]

GSM-R 3.2 GTSOFTX3000 Configuration Manual CONFIDENTIAL



About This Document

Author

Prepared by Liao Huanran Date 2010-08-10

Reviewed by Date

Approved by Date

Summary

This GTSOFTX3000 Configuration Manual was prepared by GTSOFTX3000 team and

reviewed by staff from marketing, telecom design, sales, and technical support departments.

This Manual will be incorporated into configuration management and be released on the 3MS

website after being approved by relevant authority. The recipients of this Manual shall not

disclose the information contained in this Manual without permission.

Note: This Manual is confidential information of Huwei and shall not be distributed to

customers or competitors. In case of violation, the departments or personnel involved

shall be held liable. The violator may receive a warning or reduction in salary, or may be

fined or dismissed.

History

Date Issue Details Author

2010-08-04 1.00 Initial release Liao Huanran (ID:

36579)




2010-8-10 1.01 Modify “Product configuration list”: add the following

4 items:

1, S4016497 Cabinet Installation Component

2, 02235831 Wireless Network Product Line,Network

Accessories

3, 02236921 IMS 5.0,Installation Suite of N68E-22

Cabinet

4, 02237296 Installation Suite of N68E-PDF

Liao Huanran (ID:

36579)

2010-8-11 1.02 Add the item “Average busy-hour traffic of CS data

service subscribers” to Table 2-1 Parameters of the

service model

Ratio of ordinary subscribers is processed by 1

Liao Huanran (ID:

36579)

2010-8-12 1.03 Modify 82200417 Configuration Algorithm: Number

of data service subscribers = Total number of

subscribers x Ratio of CS data service subscribers

Liao Huanran (ID:

36579)

2011-01-14 1.1 Refresh WIFM, WBFI number of configuration

principle

Liao Huanran (ID:

36579)

2011-1-28 1.2 1, the largest maximum number of lawful

interception centers to 10, with reference to the public

network changes

2, License configuration instructions to add a

"quotations"

Liao Huanran (ID:

36579)

2011-5-10 1.3 Changing PC Server: From HP DL380G6 switch to

DELLR510 and IBM3650M3

Liao Huanran (ID:

36579)

2011-5-16 1.4 Add the principles of software configuration items Liao Huanran (ID:

36579)

2011-11-22 1.5 Changing BOM of SMU board: From 03050599

switch to 03053985 Xi Hao（ID:00103453）




Contents

1 Overview ......................................................................................................................................... 7

1.1 Objective .......................................................................................................................................................... 7

1.2 Product Features ............................................................................................................................................... 7

2 Overview of the Network and Configuration ......................................................................... 8

2.1 Network Introduction ....................................................................................................................................... 8

2.2 Configuration Model ........................................................................................................................................ 9

2.2.1 Service Model ......................................................................................................................................... 9

2.2.2 Service Traffic Prediction ..................................................................................................................... 11

3 Product Configuration List and Description ......................................................................... 12

3.1 Configuration Overview ................................................................................................................................. 12

3.2 Mapping Between Spart and Bpart of the Hardware ...................................................................................... 13

3.3 Configuration List and Description of the Integrated Equipment .................................................................. 13

3.3.1 Configuration List–750C ...................................................................................................................... 13

3.3.2 Configuration Description ..................................................................................................................... 20

3.3.3 Configuration List and Description of the Server Unit ......................................................................... 21

3.4 Mapping Between Spart and Bpart of the Software ....................................................................................... 22

4 License Configuration List and Description.......................................................................... 25

4.1 License Package Configuration ...................................................................................................................... 25

4.2 License Configuration List ............................................................................................................................. 25

4.2.1 License for Basic Resource Control Feature ......................................................................................... 25

4.2.2 License for Special Resource Control Feature ...................................................................................... 28

4.2.3 License for Function Authorization Control Feature ............................................................................ 31

5 Configuration of the Materials to Be Determined on the Basis of the Site Survey ....... 36

5.1 List of the Materials to Be Determined on the Basis of the Site Survey ........................................................ 36

5.2 Description of the Materials to Be Determined on the Basis of the Site Survey ............................................ 37

6 Configuration of Accessories and Auxiliary Equipment .................................................... 38

6.1 Configuration List and Description of Delivery Accessories ......................................................................... 38

6.1.1 Configuration List of Delivery Accessories .......................................................................................... 38

6.1.2 Configuration Description of Delivery Accessories .............................................................................. 42

6.2 Configuration List and Description of Auxiliary Equipment ......................................................................... 42

6.2.1 Configuration List of Auxiliary Equipment .......................................................................................... 42




6.3 Configuration List and Description of External Cables ................................................................................. 48

6.3.1 Configuration List of External Cables .................................................................................................. 48

6.3.2 Configuration Description of External Cables ...................................................................................... 52

6.4 Configuration List and Descriptoin of the Installation Suite .......................................................................... 53

6.4.1 Configuration List of the Installation Suite ........................................................................................... 53

6.4.2 Configuration Description of the Installation Suite .............................................................................. 55

6.5 Configuration List of the N68E PDF Installation Suite ................................................................................. 55

6.6 Configuration List and Description of Network Accessories ......................................................................... 56

6.6.1 Configuration List of Network Accessories .......................................................................................... 56

6.6.2 Configuration Description of Network Accessories .............................................................................. 56

7 Expansion and Upgrade Configuration .................................................................................. 58

7.1 Expansion Method and Configuration Description ........................................................................................ 58

7.1.1 Expansion Method and Rule ................................................................................................................. 58

7.1.2 Materials to Be Used in the Expansion ................................................................................................. 58

7.1.3 Expansion Precautions .......................................................................................................................... 58

7.2 Upgrade Method and Configuration Description ........................................................................................... 59

7.2.1 Upgrade Method and Rule .................................................................................................................... 59

7.2.2 List of the Hardware to Be Upgraded ................................................................................................... 59

7.2.3 Precautions for Parts Replacement ........................................................................................................ 59

7.3 Replacement Strategy for Earlier Hardware ................................................................................................... 59

8 Appendix ...................................................................................................................................... 60

8.1 Traffic Model Calculation Tool ...................................................................................................................... 60

8.2 Acronyms and Abbreviations of Board Names .............................................................................................. 60

9 Acronyms and Abbreviations ................................................................................................... 62

GSM-R 3.2 GTSOFTX3000V100R001C06 Configuration

Manual CONFIDENTIAL



1 Overview

1.1 Objective

This document will be used in the telecom design, sales, and preparation of the

commercially-delivered documentation package. It details the composition, configuration list,

and configuration principles of GTSOFTX3000 V100R001. It also describes the constraints

of the GTSOFTX3000.

Documents related to this document include the GSM-R GTSOFTX3000 Configuration

Principle, MSOFTX3000 V100R008C03 Configuration Manual, and MSOFTX3000

V100R008C03 Configuration Principle. GTSOFTX3000 V100R001 is based on the 750C

hardware platform of MSOFTX3000 V100V006C05.

Only the 750C hardware version of the GTSOFTX3000 is provided.

1.2 Product Features

GTSOFTX3000 V100R001 supports the softswitching architecture and can be deployed

flexibly on the network. Compared with MSOFTX3000 V100R006C05, GTSOFTX3000

V100R001 remains the same in terms of hardware but is changed in terms of software. It has

the following features:

Using the CPCI hardware platform

Supporting 150,000 GSM-R subscribers with one pair of WVDB boards

Having the GSM-R software features added

Supporting GSM public network services defined by 3GPP




2 Overview of the Network and Configuration

2.1 Network Introduction

The GTSOFTX3000 supports various network modes. It can act as the R4 VMSC, GMSC, or

TMSC server. In cooperation with the UMG8900, it can also act as the R99 VMSC, GMSC,

or TMSC.

Figure 2-1 shows the GTSOFTX3000 in the GSM-R system.

Figure 2-1 GTSOFTX3000 in the GSM-R system

BSS

AC Server

I n t e rnetI n t e rn et

PSTN/PBX

Train control center

Dispatch station

Billing center

OMCInternet

GGSN

SGSN

Train

MS

Other MSC/VLR

SCP

HLR/FFN/EIR/AUC

Data communication

network

GTSOFTX3000

MGW

MSC/VLR/SSP/

GCR/IWF

Physical connection

Signaling

AC Server:

Acknowledgement Center

Server

MGW: Multimedia Gateway BSS: Base Station Subsystem

EIR: Equipment

Identification Register

VLR: Visited Location Register FFN: Follow-me Function

Node

HLR: Home Location

Register

GCR: Group Call Register MS: Mobile Station

MSC: Mobile Switching

Center

OMC: Operation and

Maintenance Center

PBX: Private Branch Exchange

SCP: Service Control Point GGSN: Gateway GPRS Support

Node

SGSN: Serving GPRS Support

Node

IWF: InterWorking Function PSTN: Public Switched

Telephone Network

AUC: Authentication Center




The network is described as follows:

A interface: The MGW connects to the GSM BSS over E1 (SS7/TDM) and acts as the

SG to transfer BSSAP signaling.

MTUP/MISUP interface: The VMSC server transmits MTUP/MISUP signaling over

M3UA. The VMSC server connects to the MGW through the MTUP/MISUP interface.

After the transfer of the signaling over the SG built in the MGW, a connection to the

PSTN/VMSC/GMSC/TMSC is set up over E1/STM-1 (SS7/TDM).

Gs interface: It connects to the SGSN over E1 (SS7/TDM) or IP SIGTRAN.

C/D interface: It connects to the HLR over E1 (SS7/TDM) or IP SIGTRAN.

E interface: It connects to the VMSC and SMC over E1 (SS7/TDM) or IP SIGTRAN.

CAP interface: It connects to the SCP over E1 (SS7/TDM) or IP SIGTRAN.

Mc interface: It connects to the MGW over FE (H.248/SCTP/IP).

Nc interface: It connects to another VMSC server or GMSC server over E1 (SS7/TDM).

PRI interface: The MGW connects to the PBX over E1 and transfers signaling to the

GMSC server by using the IUA protocol.

2.2 Configuration Model

The service model of the existing network or the predicted service model must be obtained

from the customer and are used for calculating the network capacity and processing capability.

This document provides the default service model of Huawei, which can be used for

calculating the network capacity and processing capability if the customer does not provide

the service model.

2.2.1 Service Model

Table 2-1 provides the service model of the GSM-R GTSOFTX3000. The default values listed

may vary with different networks.

Table 2-1 Parameters of the service model

Parameter Name Default Value

VMSC parameters

Total number of subscribers Network dependent

Average busy-hour traffic of ordinary mobile

subscribers

Network dependent

Average call duration of ordinary mobile subscribers 90s

Ratio of IN subscribers Network dependent

Average busy-hour traffic of mobile IN subscribers Network dependent

Average call duration of mobile IN subscribers 90s

Number of location registrations and updates per

subscriber during busy hours 2




Parameter Name Default Value

Handover times per subscriber during busy hours 0.2

Number of short messages per subscriber during busy

hours

2

GMSC parameters

Number of trunks required by the GMSC (excluding

the trunks to the BSC)

Not involved

Average call duration of ordinary mobile subscribers

served by the GMSC

Not involved

Ratio of IN subscribers served by the GMSC Not involved

Average call duration of IN subscribers served by the

GMSC

Not involved

TMSC parameters

Number of trunks required by the TMSC (excluding

the trunks to the BSC)

Not involved

Average call duration of ordinary mobile subscribers

served by the TMSC

Not involved

Ratio of IN subscribers served by the TMSC Not involved

Average call duration of IN subscribers served by the

TMSC

Not involved

Public parameters

Ratio of CS data service subscribers Network dependent

Average duration of CS data services 60s

Average busy-hour traffic of CS data service

subscribers

Network dependent

Average busy-hour traffic per trunk 0.7 Erl

Ratio of MS->MS calls 30%

Ratio of MS->PSTN calls 35%

Ratio of PSTN->MS calls 35%

Ratio of toll-call traffic to mobile traffic 20%

Ratio of inbound roaming subscribers 10%

Ratio of outbound roaming subscribers 10%

Radio-channel call loss rate 2%

Multi-party service parameters

Ratio of multi-party service subscribers 5%




2.2.2 Service Traffic Prediction

As viewed from the existing GSM-R markets, the network provides five configurations for

1,000 subscribers, 5,000 subscribers, 10,000 subscribers, 50,000 subscribers, and 100,000

subscribers. The configuration for more than 100,000 subscribers is not considered. If

required, contact Huawei GSM-R PDT.

Currently, typical configurations are for 5,000 subscribers and 10,000 subscribers.


Manual CONFIDENTIAL



3 Product Configuration List and Description

3.1 Configuration Overview

The GTSOFTX3000 product list contains the debugging integrated equipment, server unit,

delivery accessories, auxiliary equipment, external cable set, installation suite, network

accessories, and license package.

Part number: 01060324

Part description: HUAWEI GT800&GSMR-MSC

Table 3-1 Product configuration list

SN. Part Number

Part Description Template

1 02000474 MSOFTX3000 Mobile Module Debugging

Integrated Equipment (Contain Large Process

Capability Boards)

ATO

2 02000262 MSOFTX3000 Mobile Module Debugging

Integrated Equipment

ATO

3 02234242 MSOFTX3000,Auxiliary Equipment POC

4 02233028 SoftX3000,Cabinet Installation Suite,N68-22 POC

5 02233300 MSOFTX3000,Mobile Module Delivery

Accessories

POC

6 04000149 SoftX3000,Voice Module External Cable Set POC

7 04100061 SoftX3000,Mobile Module Complete-set Fiber

Cable

POC

8 04000104 External Suite,Power Cords All Over The

World,Class I Equipment With Connector

C13,External Cable Set

POC

9 30010850 Complete-set Packaging for SoftX3000 Voice

Module

POC

http://pdm:8000/Windchill/servlet/WindchillAuthGW/wt.enterprise.URLProcessor/URLTemplateAction?u8&action=ObjProps&oid=VR%3Aext.huawei.huaweipart.HuaweiPart%3A358597665




10 80010052 HUAWEI GT800&GSMR-MSC,license

Package

PTO

11 02314229 MSOFTX3000,KWAM1SERV,Server

Unit,Split

ATO

12 02235831 Wireless Network Product Line,Network

Accessories

POC

13 S4016497 Cabinet Installation Component POC

14 02236921 IMS 5.0,Installation Suite of N68E-22 Cabinet POC

15 02237296 Installation Suite of N68E-PDF POC

3.2 Mapping Between Spart and Bpart of the Hardware

Hardware of the GTSOFTX3000 is not offered a package quotation.

3.3 Configuration List and Description of the Integrated Equipment

3.3.1 Configuration List–750C


Part description: MSOFTX3000 Mobile Module Debugging Integrated Equipment (Contain

Large Process Capability Boards)

Table 3-2 Configuration list of the 750C debugging integrated equipment

SN. Part Number Part Description Quantity Configuration Principle

1. 02112626 SoftX3000, SF3B4VMNCN,

Voice Module And Network

Components NGN Cabinet,

N68E-22

2 The quantity is one by default.

The quantity is two if the

number of GT servers is two

and the number of XPTU is

one. One is the main cabinet;

the other cabinet place for

non-CIS XPTU (CIS, using

02112628)

2. 02112622 SoftX3000, SF3B4SPCN,

Service Processing New

Cabinet, N68E-22

0 The quantity is zero by default.

http://pdm.huawei.com:8000/Windchill/servlet/WindchillAuthGW/wt.enterprise.URLProcessor/URLTemplateAction?action=ObjProps&oid=VR:ext.huawei.huaweipart.HuaweiPart:1085475440






3. 02351627 MSOFTX3000, Basic Software

Package, for ATO


The GTSOFTX3000 software

package can be downloaded

from the support website, and

therefore not contained in the

software delivery.

4. 21050272 Cabinet Door,

DKBA4.120.1089MX,

Front/Back Door, N68E-22

Cabinet, Normal P/N:

21050272,

2075mm*594mm*25mm

2 Single door for the N68E

cabinet; configured by default;

two PCS are configured for

each cabinet; not configured

when a dual-door is required

according to the site survey.

5. 21050282 DKBA4.120.1239MX,

Front/Back Door(Dual), N68E

Cabinet, 2075*594*25

2 Dual-door for the N68E

cabinet; not configured by

default; two PCS are configured

when a dual-door is required

according to the site survey.

6. 02300461 SoftX3000, SF3K4CPS,

Service Control Shelf, NGN

2 The quantity is two by default.

The GTSOFTX3000 is

configured with one basic

subrack and one expansion

subrack.

7. 03053985 MSOFTX3000, SF32WSMU0,

System Management Unit

4 The quantity is four by default.

Quantity = Number of subracks

x 2

The GTSOFTX3000 is



subrack.

8. 03050148 SoftX3000, SF31WSIU0,

System Interface Unit



x 2

The GTSOFTX3000 is



subrack.

9. 03050145 SoftX3000, SF31WHSC0,

Hot-Swap And Control Unit



x 2

The GTSOFTX3000 is



subrack.







10. 03050151 SoftX3000, SF31WALU0,

Alarm Unit



The GTSOFTX3000 is



subrack.

11. 03051104 MSOFTX3000, SF35WCDB0,

Center Data Base Unit


The GTSOFTX3000 is

configured with one pair of

WCDBs.

The quantity is four if the

number of subscribers is more

than 10,000; the quantity is six

if the number of subscribers is

more than 50,000.

12. 03051105 MSOFTX3000, SF35WIFM0,

IP Forward Module




than 5,000; the quantity is six if

the number of subscribers is

more than 50,000.

13. 03051103 MSOFTX3000,SF35WBFI0,Ba

ck Insert FE Interface Unit




than 5,000; the quantity is six if

the number of subscribers is

more than 50,000.

14. 03051106 MSOFTX3000, SF35WMGC0,

Media Gateway Control Unit


The GTSOFTX3000 is


WMGCs.

15. 03051107 MSOFTX3000, SF35WBSG0,

Broadband Signaling Gateway

4 The quantity depends.

The quantity is two when the

number of subscribers is no

more than 10,000; the quantity

is four when the number of

subscribers is more than

10,000.

16. 03051111 MSOFTX3000, SF35WCSU0,

Call Control And Signaling

Processing Unit


The quantity is two when the

number of subscribers is no

more than 1,000; the quantity is

four when the number of

subscribers is more than 1,000.











17. 03051110 MSOFTX3000, SF35WCCU0,

Call Control Unit


One pair is configured for the

GTSOFTX3000.

18. 03051109 MSOFTX3000, SF35WSGU0,

Signaling Gateway Unit 20 Optional

19. 03050979 MSOFTX3000, SF35WAFM0,

ATM Forward Module

2 Optional

20. 03050113 SoftX3000, SF31WBAI0, Back

Insert ATM Interface Unit

2 Optional

21. 03051108 MSOFTX3000, SF35WVDB0,

VLR Data Base Unit


The GTSOFTX3000 is


WVDBs.

22. 03050955 HLR9820, SF35WEAM0, E1

And ATM Forward Module

6 Optional

23. 02312525 SGSN9810, KW3M3UPWR,

PSM Subrack Power Module

6 The quantity is six by default.


x 3

The GTSOFTX3000 is

configured with two subracks.

24. 03050932 MSOFTX3000, SF32WEPI0,

E1_Pool Interface Unit


The number of WEPIs is equal

to the number of WCSUs.

25. 03051558 Finished Board,

MSOFTX3000, SF35WCKI0,

Clock Interface Unit


One pair must be configured.

26. 06040067 KVM 4 in 1,1U,17" TFT

LCD,8wayKVM,3V3 Power

Connector,Black,With Power

Cable,Mounting

Accessories,English

Doc.-48VDC,With eight pieces

curving USB KVM

Cable,Black


27.

04150202

Power

Cable,3.0m,2.5mm^2,D3F-2S,

H07Z-K-2.5^2G&Y+H07Z-K-

2.5^2BL+H07Z-K-2.5^2B,2*T

2.5^2BL+OT2.5-6,HP

Server,LSZH

10

When HP DL380G6 is selected

for use, 10 PCS are configured

for each integrated cabinet.











28.

02351378

Quidway

S3328TP-EI,CX5Z128DM,S33

28TP-EI Mainframe(24 10/100

BASE-T ports and 2 Combo

GE(10/100/1000

BASE-T+100/1000 Base-X)

ports and 2 SFP GE (1000

BASE-X) ports (SFP Req.) and

DC -48V)

4

The quantity is four by default.

One pair is used for internal

networking, and the other is

used for MGW/MSCe signaling

plane.

29. 21140431 DKBA8.081.1062, 3U Dummy

Panel, SoftX3000V300R001

1 Required in large quantities, but

configured according to the

needs. 30. 21140432 DKBA8.081.1063, 1U

Non-Standard Dummy Panel,

SoftX3000V300R001

1

31. 21140430 DKBA8.081.1061, 2U Dummy


1

32. 21140429 DKBA8.081.1060, 1U Dummy


1

33. 29030286 DKBA8.805.0475, SoftX3000

9U Subrack Front Board Name

Plate, SoftX3000V3R001


Quantity = 2 x Number of

subracks

34. 29030287 DKBA8.805.0476, SoftX3000

9U Subrack Back Board Name

Plate, SoftX3000V3R001


Quantity = 2 x Number of basic

subracks

35. 29030290 DKBA8.805.0480, Rear Board

Name Plate of Expanded

Subrack, For

SoftX3000V300R001 Chassis

The quantity depends.

Quantity = 2 x [Number of

subracks - 1 (basic subrack)]

36. 21131012 DKBA4.130.0768MX, K Type,

PSM Subrack Filler Panel,

Extruded Aluminum Profile



x 34 - Total number of boards

37. 29020181 DKBA8.807.0277, Huawei

Sign, 1U Chassis, 42*14mm,

ABS



38. 29050400 DKBA8.817.2048,

MSOFTX3000 Film(Subrack),

MSOFTX3000, 50mmX20mm,

0.25 LEXAN 8B35/3M467



39. 29020185 DKBA8.807.0429,

MOTOROLA Sign, RNC,

42mmX14mm, ABS

Used for the MOTO project;

the quantity is optional.









40. 29050579 DKBA8.807.0702, MSC Server

Subrack Film,

MSOFTX3000(M),

50mmX20mm, 0.25 LEXAN

8B35/3M9448

Used for the MOTO project;

the quantity is optional.


41. 29040013 DKBA8.812.0012,Blank

Qualification Label, ViewPoint

Production, 70*46, Fasson

72826/3M 7872

1 Mandatory.

42. 29041013 DKBA8.817.1759, Product

Blank Nameplate, ViewPoint

Production, 70X46, 3M7818


Quantity = Number of cabinets

43. 29042542 DKBA4.150.1053MX, MOTO

Door Nameplate, HLR, 90*30,

Plastic

1 Two PCS are configured for

each N68E cabinet.

44. 29042543 DKBA4.150.1049MX,

Nameplate for

MSOFTX3000(M),

MSOFTX3000, 90*30, Plastic

1 Used for the MOTO project.

Two PCS are configured for

each N68E cabinet.

45. 29042338 DKBA4.150.0901MX, LOGO

Plate(for HUAWEI LOGO),

GM_Cabinet_N66, Plastic

1 Two PCS are configured for

each N68E cabinet.

46. 29042468 DKBA4.150.0974MX,

Nameplate for

MSOFTX3000(N68E),


1 Used for the delivery of the

MSOFTX3000.

Two PCS are configured for

each N68E cabinet of the

GTSOFTX3000.

47. 29042471 DKBA4.150.0980MX,

Nameplate for MCN90

MSOFTX3000(N68E),


1 Used for the TD delivery. Two

PCS are configured for each

N68E cabinet.

48. 29060001 Sign Of Network Entry

Certificate, (17-5043-060006),

50mm*80mm, 2009/01/09,

Mobile Switching System,

M900/1800

1 Used for the GSM delivery in

China. One PCS is configured

for each cabinet.

49. 29060433 Sign Of Network Entry

Certificate, (17-5043-080747),

50mm*80mm, 2009/03/10,

TD-SCDMA Digital Cellular

Mobile Telecommunication

Network Core Network

Subsystem, MCN90

1 Used for the TD delivery. One

PCS is configured for each

cabinet.















50. 29041396 DKBA8.817.2792,KVM

Operating Alarm

Film,MSC9880,80mmX40mm,

3M7880

1 Mandatory. One PCS is

configured.

51. 31504361 HUAWEI MSOFTX3000

Mobile SoftSwitch Center

Quick Installation Guide


One PCS must be configured.

52. 31070140 HUAWEI CN, Engineering

Design Document,(HW)

1 One PCS is configured for the

contract that requires

pre-installation.

53. 29100016 Product label,Blank label,192

Groups,24 Row,8

Array,22mm*8mm,DKBA8818

1008,Label Content According

To the BOQ of a contract

1 Required in large quantities;

used in pre-installation for

printing board tags.

54. 29100017 Product label,Blank label,21

Groups,3 Row,7

Array,90mm*25mm,DKBA881

81509,Label Content

According To the BOQ of a

contract



printing cabinet row/column

number tags.

55. 29080013 DKBA8.817.8258,Core

Network Cabinet Internal Cable

Suite Label Set



printing subrack/equipment

tags.

56. 29080019 Cable

label,DKBA8.818.1040,Signal

Cable Engineering label,Matte

White,Not Lettering "TO",3

Array,10 Row,30

Groups,84*22mm



printing cable tags.

57. 29100002 DPD blank

label-24-10X1-195X9.2(mm)-l

abel content decided by

configure in the cabinet



printing PDB tags.

"Mandatory" means that the item is necessary for the equipment and the customer cannot

make a choice. "Optional" means that the item can be configured if required. "The quantity

depends." means that the item is mandatory but the quantity is decided by customer's needs.






3.3.2 Configuration Description

This section mainly describes the optional parts in the debugging integrated equipment.

02112626 SoftX3000,SF3B4VMNCN,Voice Module And Network Components

NGN Cabinet,N68E-22: It is mandatory in Huawei delivery and MOTO project delivery.

02112622 SoftX3000,SF3B4SPCN,Service Processing New Cabinet,N68E-22: It is

used in Huawei delivery and MOTO project delivery. The number of cabinets depends

on the number of subracks: Number of cabinets = ROUNDUP [(Number of subracks -

2)/4]

21050272 DKBA4.120.1089MX,Front/Back Door,N68E-22 Cabinet,2075*594*25

21050282 DKBA4.120.1239MX,Front/Back Door(Dual),N68E

Cabinet,2075*594*25

21050272 is a single door, and 21050282 is a dual-door. The front door and back door

can be exchanged. 21050272 is configured by default; two PCS are configured for each

cabinet. If a dual-door is required according to the site survey, 21050282 is configured,

and two PCS are configured.

02300461 SoftX3000,SF3K4CPS,Service Control Shelf ,NGN

02312525 SGSN9810,KW3M3UPWR,PSM Subrack Power Module: Quantity =

Number of subracks x 3. Each subrack is configured with three power boards: two in the

front and one at the back, which are installed next to the frame.

21140429–21140432 are required in large quantities, but configured according to the

needs.

29050400 DKBA8.817.2048,MSOFTX3000

Film(Subrack),MSOFTX3000,50mmX20mm,0.25 LEXAN 8B35/3M467 Quantity

= Number of subracks

29020181 DKBA8.807.0277,Huawei Sign,1U Chassis,42*14mm,ABS Quantity

= Number of subracks

29030286 DKBA8.805.0475,SoftX3000 9U Subrack Front Board Name

Plate,SoftX3000V3R001 Quantity = 2 x Number of subracks

29030290 DKBA8.805.0480,Rear Board Name Plate of Expanded Subrack,For

SoftX3000V300R001 Chassis Quantity = 2 x [Number of subracks - 1 (basic

subrack)]

29030287 DKBA8.805.0476,SoftX3000 9U Subrack Back Board Name

Plate,SoftX3000V3R001 Quantity = 2 x Number of basic subracks

0305XXXX boards, which are configured according to the quotation.

21131012 DKBA4.130.0768MX,K Type,PSM Subrack Filler Panel,Extruded

Aluminum Profile

29041396 DKBA8.817.2792,KVM Operating Alarm

Film,MSC9880,80mmX40mm,3M7880: It is mandatory; one PCS is configured.

29020185 DKBA8.807.0429,MOTOROLA Sign,RNC,42mmX14mm,ABS: It is

mandatory only in MOTO project delivery; one PCS is configured for each subrack.

29050579 DKBA8.807.0702,MSC Server Subrack

Film,MSOFTX3000(M),50mmX20mm,0.25 LEXAN 8B35/3M9448: It is mandatory

only in MOTO project delivery; one PCS is configured for each subrack.

29060001 Sign Of Network Entry

Certificate,(17-5043-060006),50mm*80mm,2009/01/09,Mobile Switching

System,M900/1800 It is the certificate issued by China's Ministry of Information




Industry to allow the MSOFTX3000's entry into the GSM markets. One PCS is required

for each cabinet delivered in Chinese markets.

29060433 Sign Of Network Entry

Certificate,(17-5043-080747),50mm*80mm,2009/03/10,TD-SCDMA Digital Cellular

Mobile Telecommunication Network Core Network Subsystem,MCN90: One PCS is

required for each cabinet delivered for TD-SCDMA projects in Chinese markets.

31504361 HUAWEI MSOFTX3000 Mobile SoftSwitch Center Quick Installation

Guide-(03,N68E): It is mandatory when the cabinet 02112626 is delivered; one PCS is

required.

02351378 Quidway S3328TP-EI,CX5Z128DM,S3328TP-EI Mainframe(24 10/100

BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and 2

SFP GE (1000 BASE-X) ports (SFP Req.) and DC -48V): Configured according to the

quotation. One pair must be configured for internal networking; the other pair is optional.

To ensure the reliability of the signaling network, except for the co-installation of the

MGW and MSCe, one pair of LAN switches must be configured for the signaling

network.

3.3.3 Configuration List and Description of the Server Unit


Part description: MSOFTX3000,KWAM1SERV,Server Unit,Split

Table 3-3 Configuration list of the server unit

SN. Part Number Part Description Quantity

1. 02244409 SoftX3000,SF3T2iGWB,Charging Gateway Server Terminal 2

2. 02313066 MSOFTX3000,KWAM1XPTU,Interception Protocol

Conversion And Interface Unit

1

3. 02245110 MSOFTX3000,KWAM0IGWB,IGWB Server Terminal 2

4. 02245106

MSOFTX3000,KWAT2CTS,Emergency

Workstation,WinSvr2003 R2)

1

5. 02245107

MSOFTX3000,KWAT5BAM,BAM Server

Terminal,WinSvr2003 R2

1

6. 02319776 GT800,KWAM0GTSV,GT800 Server 1

7. 02319945 GT800,KWAM1GTSV,GT Server(dual host backup mode) 1

8. 02319946 GT800,KWAM2GTSV,GT server(upgrade mode) 1

The configuration description is as follows:

02244409 is the iGWB server software; two PCS are configured in each office, working in

active/standby mode. For details on the configuration principle for the iGWB server, see the

iGWB Configuration Description (for the SoftX3000, MSoftX3000, and CSoftX3000).

02313066 is the XPTU server unit. For details on the configuration principle for the XPTU server, see the MSOFTX3000 XPTU Lawful Interception Configuration Manual.




Note: The configuration 02112628 cabinet, you need to configure the corresponding server

power cord, power cord for each IBM X3650M3 Code: 02239872 * 1; each DELL R510

Power Line: (04150183 +04150142 * 2 * 2) * 1;

If the expansion is a server or client change (no cabinet, issued a separate server), then each

DELL R510 configuration 02230EVD * 1, each IBM X3650M3 configuration 02230EVE * 1.

02245110 is the iGWB server hardware and Operating System; two PCS are configured in

each office, working in active/standby mode. For details on the configuration principle for the

iGWB server, see the iGWB Configuration Description (for the SoftX3000, MSoftX3000, and

CSoftX3000).

02245106 is the emergency workstation and is optional.. When a BAM is configured, the

emergency workstation can be configured to work as the standby BAM.

02245107 is the BAM server terminal. In each office, one BAM server and one emergency

workstation are configured for the GTSOFTX3000.

Either 02319776 or 02319945 is configured. The quantity is one by default.

One PCS of 02319946 is configured only when the original configuration has only one GT

server.

3.4 Mapping Between Spart and Bpart of the Software

For the software functions, see the GTSOFTX3000 V100R001C06 Feature List.

Description of resources:

Configure capacities based on service models.

Description of functions:

Basic functions must be configured, including 81200587, 81200116, 81200048, 81200054,

81200397, 81200399, 81200585, and 81200576.

The others are optional functions, which are configured if customers require.

The principles of software configuration items is as following:

Category Part Number

Part Description Configuration Algorithm

Basic

Software

88030RQW MSOFTX3000,Kernel

Software(per MSC)

If the number of users is not 0,

the configuration is 1, otherwise,

do not configure

88030QBQ MSOFTX3000,Basic Software

V100R001(per K sub) Number = the number of users

88030RRF

MSOFTX3000,AC Server Basic

Software-WMFD-202100(per K

sub)-WMFD-202100

Number = the number of users

Option

Software 88034626 IP over E1 per k subs

Select the required software





S2010891 mSoftX3000,TDM 2M signaling

link per 2M Links,VMSC Number = Manual input

S2010892 MSOFTX3000,Embedded STP

function per 64K links,VMSC Number = Manual input

S2010855 mSoftX3000,CAMEL phase2 per

k subs,VMSC



S2010856 mSoftX3000,CAMEL phase3 per

k subs,VMSC



88034628 CAMEL phase4 per k subs Select the required software


88030EKJ Lawful interception function(per

subs)-Server/UMG conbined

If need the software and t

Lawful interception function,

then: Number = 1000 * the

number of users

88030EJW SCTP multi-homing(per K

sub)-Server/UMG conbined



S2010901 mSoftX3000,Multi-PLMN

function per PLMN,VMSC Number = Manual input

88030EKC Intra-MSC A-Flex(per K

sub)-Server/UMG conbined



88030EKB

Dual homing from MGW to MSC

Server(per K sub)-Server/UMG

conbined



88033018 Update Network Identity and

Timezone (NITZ) (per k subs)



88030PYR

MSOFTX3000,MSC POOL(1+1

main-standby)(per k

sub),WMFD-205300



88030QAF

MSOFTX3000,Call Area

Restriction (CAR)(per k

sub),WMFD-200400



88030QAG

MSOFTX3000,Multi-Engine

Control(per k

sub),WMFD-202800



88030QAJ

MSOFTX3000,Special Functional

Number(per k

sub),WMFD-204500



88030QAK MSOFTX3000,eLDA(Dispatcher

mode)(per k sub),WMFD-205100



88030QAM MSOFTX3000,Master Train

List(per k sub),WMFD-205200






88030QAN

MSOFTX3000,Mobile Station

Location Service (MSLS)(per k

sub),WMFD-205400



88030SVV MSOFTX3000,Short Message

(per k sub),WMFD-010200



88030SVW MSOFTX3000,Fax Operation(per

k sub),WMFD-010300



88030SVX

MSOFTX3000,Bearer

Service(per k

sub),WMFD-010500



88030SVY

MSOFTX3000,Complementarity

Operation(per k

sub),WMFD-020100



88030SWA

MSOFTX3000,ODB

Function(per k

sub),WMFD-030000



88030SWB

MSOFTX3000,Charge

Function(per k

sub),WMFD-100000



88030SWC

MSOFTX3000,Protocol Interface

Function(per k

sub),WMFD-110000



88030SWD

MSOFTX3000,Enhanced Group

Call & Group Broadcast

Function(per k

sub),WMFD-200000




Manual CONFIDENTIAL



4 License Configuration List and Description

The license described here is for GTSOFTX3000 V100R001C06. The licenses for different C

versions vary.

If the quotation is based on TRX, one TRX corresponds to ten subscribers.

4.1 License Package Configuration


Part description: HUAWEI GT800&GSMR-MSC,License Package

Table 4-1 Configuration list of the GTSOFTX3000 license package

SN. Part Number Part Description Quantity

1 80020006 MSOFTX3000,Basic,Basic Resource Control Feature 1

2 80020007 MSOFTX3000,Special,Special Resource Control Feature 1

4.2 License Configuration List

4.2.1 License for Basic Resource Control Feature


Part description: MSOFTX3000,Basic,Basic Resource Control Feature




Table 4-2 License configuration related to the basic resource control features

Part Number

Part Description

Unit for License Quotation

Configuration Algorithm

Quotations Remarks

82200

010

(Basic)

MSOFTX3000,L

KWASSPUSR01

,Maximum of

Concurrent Ssp

Calls,1 Call

Maximum

number of

concurrent

IN calls: 100

to

10,000,000

Maximu

m number

of

concurren

t IN calls

= Number

of

subscribe

rs x Ratio

of IN

subscribe

rs x

ERL/per

IN

subscribe

r x 2

Traffic The value is controlled in

the DB. When the

subscriber or network

initiates an IN call, the

value increases. When the

IN call is released, the

value decreases.

82200

017

(Basic)

MSOFTX3000,L

KWACSDUSR0

1,Maximum of

Concurrent Data

Service Calls,1

Call

Maximum

number of

concurrent

data service

calls:

0 to

10,000,000

Maximu

m number

of

concurren

t data

service

calls =

Number

of CS

data

service

subscribe

rs x

Average

Erlang

per CS

data

service

subscribe

r during

busy

hours x 2

Traffic The value is controlled in

the DB. When a mobile

subscriber initiates a data

service call, the value

increases by one. When

the data service call is

released, the value

decreases by one.




Part Number

Part Description



Quotations Remarks

82200

009

(Basic)

MSOFTX3000,L

KWAUSR01,Ma

ximum of

Users,1 User

Maximum

number of

subscribers:

4,000 to

10,000,000

Enter a

specific

value:

Total

number

of

subscribe

rs =

Number

of

subscribe

rs

specified

in the

contract

Subscriber The value is controlled in

the DB. When a

subscriber is inserted in

the VLR, the value

increases by one. When a

subscriber is deleted from

the VLR, the value

decreases by one. If the

license returns a

restriction message, no

new subscribers can be

inserted in the VLR.

82200

018

(Basic)

MSOFTX3000,L

KWALIUSR01,

Maximum of

Lawful

Interception

Users,1 User

Maximum

number of

lawful

interception

subscribers:

0 to 400,000

Enter a

specific

value:

Total

number

of lawful

intercepti

on

subscribe

rs =

Number

of lawful

intercepti

on

subscribe

rs

specified

in the

contract

Subscriber && Traffic When an interception

subscriber is successfully

set in the LIC, the value

increases by one. When

an interception subscriber

is deleted from the LIC,

the value decreases by

one.




Part Number

Part Description



Quotations Remarks

82200

019

(Basic)

MSOFTX3000,L

KWALICNTR01

,Maximum of

Lawful

Interception

Centers,1 Center

Maximum

number of

LICs: 0 to

10

The

number

of LICs is

configure

d in

accordanc

e with the

customer'

s

requireme

nt when

the lawful

intercepti

on service

is

configure

d.

The

default

number is

1 if the

lawful

intercepti

on

function

is

required.

Subscriber && Traffic The value increases by

one when an LIC is

started on the XPTU. The

value decreases by one

when an LIC is stopped

or exits. The invalid

license causes the lawful

interception function to

be unavailable.

4.2.2 License for Special Resource Control Feature


Part description: MSOFTX3000,Special,Special Resource Control Feature




Table 4-3 License configuration related to the special resource control features

Part Number

Part Description Unit for License Quotation


Quotations Remarks

82200413

(Special)

MSOFTX3000,LKWAM

AXCONCALL01,Max

concurrent calls

Maximum number of

concurrent calls:

100 to 5,400,000

Number of

concurrent calls =

Number of

subscribers x (Ratio

of IN subscribers x

Average busy-hour

Erlang of IN

subscribers +

Average voice-call

busy-hour Erlang of

ordinary subscribers

+ Ratio of CS data

service subscribers

x Average

data-service

busy-hour Erlang of

CS data service

subscriber) x 2

Traffic It is controlled

in the DB.

When a call is

initiated, the

value increases

by 2. When a

call is released,

the value

decreases by 2.

82200412

(Special)

MSOFTX3000,LKWAM

AXCAMELUSR01,Max

Camel Users

Maximum number of

CAMEL subscribers:

4,000 to 5,400,000

Number of CAMEL

subscribers = Total

number of

subscribers x Ratio

of CAMEL

subscribers

Subscriber It is controlled

in the DB.

When a

CAMEL

subscriber is

inserted into the

VLR, the value

increases by 1.

When a

CAMEL

subscriber is

deleted from the

VLR, the value

decreases by 1.

If a message

indicating the

number is

limited, no new

CAMEL

subscriber can

be inserted.




82200414

(Special)

MSOFTX3000,LKWAM

AXDATAUSR01,Max

Data Service Users

Maximum number of data

service subscribers:

0 to 5,400,000

Number of data

service subscribers

= Total number of

subscribers x Ratio

of CS data service

subscribers

Subscriber &&

Traffic

It is controlled

in the DB.

When a data

service

subscriber is

inserted into the

VLR, the value

increases by 1.

When a data

service

subscriber is

deleted from the

VLR, the value

decreases by 1.

If a message

indicating the

number is

limited, no new

data service

subscriber can

be inserted.

82200417

(Special)

MSOFTX3000,LKWACO

NNUMDAY01,the

number of continuous days

in a traffic climax

Number of consecutive

overload days: 1 to 3

Minimum number

of consecutive

overload days

during a single

traffic peak = 1

(carriers except

China Mobile)

= 3 (China Mobile)

Default value: 0

(This item is

mandatory. The

value is 0 only if

the version is

upgraded but the

license is not

upgraded.)

Subscriber &&

Traffic

It is controlled

in the DB. The

value increases

by 1 if overload

continues to

occur on the

day after the

specified

consecutive

overload days.

If overload does

not occur on

that day, the

value returns to

0.

82200418

(Special)

MSOFTX3000,LKWACO

NNUMTIME01,the

maximum number of

traffic climax per year

Number of traffic peaks

within a year: 10 to 30

Maximum number

of traffic peaks

within a year = 30

(carriers except

China Mobile)

= 10 (China

Mobile)

Subscriber &&

Traffic

It is controlled

in the DB. The

value increases

by 1 when a

traffic peak

occurs within a

year. The value

returns to 0

after the year

passed.




82200455

(Special)

MSOFTX3000,LKWAVE

RLICENSE01,Version Of

License File

Number of version control

items: 127 to 255

Number of version

control items in the

license file = 127 (if

the quotation is

based on the

number of

subscribers)

= 255 (if the

quotation is based

on the traffic)

Default value: 0

(This item is

mandatory. The

value is 0 only if

the version is

upgraded but the

license is not

upgraded.)

Subscriber &&

Traffic

82200479

(special)

GTSOFTX3000,LKWAC

ONCURGGRP01,Maximu

m of Concurrent Group

Calls,1 Call

Maximum number of

concurrent groups:

1 to 40,000

The default value is

40,000.

Traffic The value

increases by 1

after a group

call is initiated.

The value

decreases by 1

after a group

call is released.

82200480

(special)

GTSOFTX3000,LKWAS

UBSCRIGRP01,Maximu

m of Subscribe Groups,1

Group

Maximum number of

subscribed groups:

15 to 40,000

The default value is

40,000.

Subscriber &&

Traffic

The value

increases by 1

after a group is

added. The

value decreases

by 1 after a

group is

deleted.

4.2.3 License for Function Authorization Control Feature

The function switch is used for determining whether a function is enabled. The value 1

indicates that the function is enabled; the value 0 indicates that the function is disabled. The

default value is 0 unless otherwise specified.




Table 4-4 License configuration related to the function authorization control features

Part Number


Configuration

Corresponding Function List Number

Quotatio

ns Function Switch

81200034

(basic)

MSOFTX3000,LKWASSP01

,CAMEL Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when IN

services

are

required.

WMFD-1

50100,

WMFD-1

50200,

WMFD-1

51200

Subscribe

r &&

Traffic

1: Yes

0: No

81200036

(basic)

MSOFTX3000,LKWASMS0

1,Sms Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when

dual-homi

ng is

required.

WMFD-1

60500

Subscribe

r &&

Traffic

1: Yes

0: No

81200039

(basic)

MSOFTX3000,LKWADualH

M01,Dual Home Function

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when the

eMLPP

function is

required.

WMFD-2

00300

Subscribe

r &&

Traffic

1: Yes

0: No

81200041

(basic)

MSOFTX3000,LKWASTP0

1,STP Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when A

Flex

networkin

g is

required.

WMFD-1

60300

Subscribe

r &&

Traffic

1: Yes

0: No

81200045

(basic)

MSOFTX3000,LKWALI01,

Lawful Interception Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when

dual-homi

ng is

required.

WMFD-1

60500

Subscribe

r &&

Traffic

1: Yes

0: No




Part Number


Configuration


Quotatio

ns Function Switch

81200048

(basic)

MSOFTX3000,LKWAEMLP

P01,eMLPP Function

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when the

eMLPP

function is

required.

WMFD-2

00300

Subscribe

r &&

Traffic

1: Yes

0: No

81200182

(basic)

MSOFTX3000,LKWAECT0

1,ECT Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when the

STP

function is

required or

when

81200039

is

required.

WMFD-1

40300

Subscribe

r &&

Traffic

1: Yes

0: No

81200112

(basic)

MSOFTX3000,LKWAMAF

LEX01,MINI_A_FLEX

Function

Per MSC

server

0-1

Optional

function;

it must be

configured

when SMS

is

required.

WMFD-0

10201,

WMFD-0

10202

Subscribe

r &&

Traffic

1: Yes

0: No

81200116

(basic)

MSOFTX3000,LKWAUSSD

01,USSD Function

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when the

eMLPP

function is

required.

WMFD-2

00300

Subscribe

r &&

Traffic

1: Yes

0: No

Default

value: 1




Part Number


Configuration


Quotatio

ns Function Switch

81200158

(basic)

MSOFTX3000,LKWAMVN

OPLMN01,EPLMN Under

MVNO Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when

NITZ is

required.

WMFD-1

63400

Subscribe

r &&

Traffic

1: Yes

0: No

81200160

(basic)

MSOFTX3000,LKWASMSI

ND01,Sms Indication When

Call Failure Function

Per MSC

server

0-1

Optional

function.

WMFD-1

63000

Subscribe

r &&

Traffic

1: Yes

0: No

81200054

(Special)

MSOFTX3000,LKWAMSG

TRC01,Message Trace

Function

Per MSC

server

0-1

Basic

function; it

must be

configured

.

WMFD-1

20600

Subscribe

r &&

Traffic

1: Yes

0: No

Default

value: 1

81200208

(Special)

MSOFTX3000,LKWACAM

EL401,CAMEL4 Function

Per MSC

server

0-1

Optional

function; it

must be

configured

when

CAMEL4

is

required.

WMFD-1

51200

Subscribe

r &&

Traffic

1: Yes

0: No

81200585

(Special)

MSOFTX3000,LKWABSSA

CCESS,BSS Access Function

Per MSC

server

0-1

Basic

function; it

must be

configured

;

otherwise,

calls

cannot be

connected.

None Subscribe

r &&

Traffic

1: Yes

0: No

Default

value: 1

81200587

(Special)

MSOFTX3000,LKWAMPT

Y02,MPTY Function

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when the

MPTY

function is

required.

WMFD-0

20500

Subscribe

r &&

Traffic

1: Yes

0: No




Part Number


Configuration


Quotatio

ns Function Switch

81200397

HUAWEI

GT800&GSMR,LKWAVGC

SINIT,VgcsInit,0-1

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when

VGCS and

VBS are

required.

WMFD-2

00100,

WMFD-2

00200

Subscribe

r &&

Traffic

1: Yes

0: No

81200399

HUAWEI

GT800&GSMR,LKWAMSC

MATRIX,MSCMatrix,0-1

Per MSC

server

0-1

Basic

function,

mandatory

; it must

be

configured

when the

MSC call

matrix

function is

required.

WMFD-2

02200

Subscribe

r &&

Traffic

1: Yes

0: No

81200576

GTSOFTX3000,LKWAEXP

CALLLOG01,ExpCallLog

Per MSC serve

0-1

Basic

function; it

must be

configured

.

None Subscribe

r &&

Traffic

1: Yes

0: No

Default

value: 1

81201011

GTSOFTX3000,LKWASPE

CFUNCNUM01,Special

Function Number

Per MSC

server

0-1

Optional

function; it

must be

configured

when the

special

function

number is

required.

WMFD-2

04500

Subscribe

r &&

Traffic

1: Yes

0: No


Manual CONFIDENTIAL



5 Configuration of the Materials to Be Determined on the Basis of the Site Survey

5.1 List of the Materials to Be Determined on the Basis of the Site Survey

Table 5-1 List of the materials to be determined on the basis of the site survey

Material Parameter to Be Determined Remarks on Quotation

Power cable (part number

04000358/04000336)

Length

Color (three colors by default:

black, blue, and yellow-green)

Material

Offer a

quotation

E1 trunk cable Length/impedance Offer a

quotation

BITS clock cable Length/impedance Not offer a

quotation

Length-fixed shielded straight-through

cable

Length/quantity Offer a

quotation

Length-fixed shielded crossover cable Length/quantity Offer a

quotation

Unshielded network cable Length Offer a

quotation

Installation accessories kit Type of the floor for installation Offer a

quotation

Power cables and signal cables for

equipment

Stating the types, quantities and

lengths

Not offer a

quotation

Note: Remarks on Quotation indicate whether the material needs a quotation.




5.2 Description of the Materials to Be Determined on the Basis of the Site Survey

1. Power cable

See the description of the external cables.

2. E1 trunk cable

See the description of external cables.

3. BITS clock cable

See the description of external cables.

4. Network cable and connector

A shielded cable (its length is to be decided according to the site survey) is used to

connect the GT server to the maintenance console.

Two shielded cables (their lengths are to be decided according to the site survey) are

used to connect the GT server to the LAN switch.

A shielded cable (its length is to be decided according to the site survey) is used to

connect the GT server to the external network.

See the description of other network accessories.

5. Installation accessories kit

See the description of installation accessories kit.

6. Power cable and signal cable

See the description of auxiliary equipment.


Manual CONFIDENTIAL



6 Configuration of Accessories and Auxiliary Equipment

6.1 Configuration List and Description of Delivery Accessories

6.1.1 Configuration List of Delivery Accessories


Part description: MsoftX3000, Mobile Module Delivery Accessories

Table 6-1 Configuration list of delivery accessories

SN.

Part Number Part Description Quantity Configuration Principle

1. 02236775 Accessory,MSOFTX3000,Documents

1

(Intermediate layer)

CD documents, not provided by

default

If required, the following

documents are available:

GSM-R documents: 1131550 for

delivery in China, 31131979 for

delivery outside China

GSM-T documents: 31131978 for

delivery in China, 31131980 for

delivery outside China

2.

02238706 MSOFTX3000,Auxiliary Necessary

Materials 1


One PCS is configured for each

cabinet.

3. 2 04040411 Trunk Cable,Self-Loop

Connector,75ohm,0mm,D50M-II 1

One PCS is configured if

03050932 is configured.

4. 3 05160182 MSoftX3000,Terminal Software

Suite,V100R002 1




SN.


5. 25050014 Twisted-Pair Cable,100ohm,,Category 5e

UTP,0.51mm,24AWG,8Cores,PANTONE

430U,Use with Plug:14080082 1m

Not provided by default, but may

be configured if required by the

site survey

6. 14080082 Network Interface Connector,8Bit

8Pin,Crystal Plug,Matching 25050014 1



site survey

7. 25050057 Twisted-Pair Cable,100ohm,Category

5e,FTP,0.52mm,24AWG,8Cores,4Pairs,PA

NTONE 430U,Use with Plug:14080097

1m



site survey

8. 14080097 Network Interface Connector,8-Bit

8PIN,Shielded,Crystal Model

Connector,Matching 25050057

1



site survey

9. 14990086 Connector Accessories,Shielded Moudlar

8P8C Plug Gray Protection

Boot,14080097,1:1,For OEM

1



site survey

10. 02210192 Tool,Crimping Tool For Shielded Module

Plug,Matched 14080114 1

Optional, but one PCS may be

configured if the shielded cable is

made on site

11. 21100041 Nonmetal Parts,DKBA0.480.0457-GT

100M,Wire Strip,100*2.5mm,Strenth 8.1kg 300

The quantity required needs to be

calculated.

12. 21100015 Nonmetal Parts,DKBA0.480.0457-GT

150I,Wire Strip,150*3.6mm,Strenth 18.2kg 300

The quantity required needs to be

calculated.

13. 21100013 Nonmetal

Parts,DKBA0.480.0457-GT-300HD- Wire

Clip-295*7.6mm-Strenth 54.4kg

300 The quantity required needs to be

calculated.

14. 21100144 Nonmetal

Parts,DKBA0.480.0457-GT-300I- Wire

Clip-300*3.6mm-Strenth 18.2kg

300 The quantity required needs to be

calculated.

15. 28050001 Wrist Strap 2

Two PCS are configured for each

cabinet by default.

16. 29040311 Product Label,DKBA8.817.0686,Column

Label For Forehead Of B-Style

Cabinet,1Group Including 20 Pieces (From

00 to 19),Width 54mm&Height 23mm Per

Piece

2 One PCS must be configured for

each site.

17. 29040312 Product Label,DKBA8.817.0687,Row

Label For Side Door Of B-Style Cabinet,1

Group Including 16 Pieces(From A to

P),Diameter 62mm Per Piece

2 One PCS must be configured for

each site.




SN.


18. 29041061 Engineering/Blank label,Engineering

label,Power Cable label,60 Groups,6

Array,10 Row,Height 11.0,Width

25.0,Matte White,1Pcs/Group 1

Quantity of power cable labels =

ROUNDUP (quantity of power

cables/30) + 1

The power cables refer to all the

-48 V power cables, GND power

cables, and PGND power cables.

The number 1 refers to one spare

label.

19. 29041060 Engineering/Blank label,Engineering

label,Signal Cable label,30 Groups,10

Array,3 Row,Height 22.0,Width 84.0,Matte

White,1Pcs/Group

1

Quantity of signal labels =

ROUNDUP ((quantity of EPI trunk

cables x (17/30)) + (quantity of

other signal cables/15)) + 1

The EPI trunk cables refer to all

the 75-ohm trunk cables

(04040441 to 04040445) and

120-ohm trunk cables (04042277

to 04042283).

An EPI trunk cable consists of

eight E1 lines. Therefore, one cable

needs to be configured with 17

labels.

Other signal cables refer to all the

cables except the power cables.

The number 1 refers to one spare

label.

20. 21200708 Plastic Parts,DKBA0.480.0244,Label Type

Harness,Universal 12

Used to fasten the labels to the

cable terminals.

Quantity = (quantity of 29041060 x

30) + (quantity of 29041061 x 60)

21. 02231806 C9000L,PVC Wiring Trough Installation

Assembly (2m) 1




site survey

22. 28010123 Fire Retarded PVC Bellow,D40

20m



site survey

23. 14990111 Connector Accessories,Protection Boot

That Used With D Type Shell Female

D-SUB Connector,Matching With

DB50/DB78,1:1

1 Quantity = Quantity of WEPI/2

24. 29050995 DKBA8.817.5799,GTSOFTX3000 Door

Mask,GTSOFTX3000,89mm*39mm,0.25

LEXAN 8B35/3M467

1 Not configured




SN.


25. 05160127 HUAWEI MSC9880,Terminal Software

Suite(M) 1

Not configured for the

GTSOFTX3000

26. 05160217 MSoftX3000,Terminal Software

Suite,V100R003 1


GTSOFTX3000


Suite,V100R003C02 1


GTSOFTX3000


Suite,V100R005 1


GTSOFTX3000

29. 05113637 GTSOFTX3000,SF3iGWBC34,Terminal

Physical Software,Program 1


GTSOFTX3000

30. 05160251 MSOFTX3000,Terminal Software

Suite,V100R005C10 1


GTSOFTX3000

31. 05114286 MSOFTX3000,MSOFTX3000

V100R006C02,Product Physical Software 1


GTSOFTX3000

32. 05114287 MSOFTX3000,MSOFTX3000



GTSOFTX3000

33. 05114268 MSOFTX3000,MSOFTX3000



GTSOFTX3000

34. 05114269 MSOFTX3000,MSOFTX3000



GTSOFTX3000

35. 05114320 MSOFTX3000,MSOFTX3000



GTSOFTX3000

36. 05114559

MSOFTX3000,MSOFTX3000



GTSOFTX3000

37. 05160272 MSOFTX3000,Terminal Software

Suite,V100R006 1


GTSOFTX3000


Suite,V100R007 1


GTSOFTX3000

39.

05114580

MSoftX3000,SF3iGWBS2,Charging

Gateway Physical Software

Package,Program,V300R005C31,For

MSOFTX3000 V100R008C02

1 Not configured for the

GTSOFTX3000

40.

05114657

MSoftX3000,SF3iGWBS5,Charging

Gateway Physical Software

Package,Program,V300R005C32,For

MSOFTX3000 V100R008C03

1 Not configured for the

GTSOFTX3000

41. 05114956

MSOFTX3000,MSOFTX3000



GTSOFTX3000




SN.


42.

02230EVD

Subassembly | Accessories,DELL DCR510

Server Independent Delivery Dressing

Package 1 one PCS for one DELL R510 serve

43.

02230EVE

Subassembly | Accessories,IBM X3650M3

Server Independent Delivery Dressing

Package

1 one PCS for one IBM X3650M3

Server

6.1.2 Configuration Description of Delivery Accessories

A site survey is required to determine the types and quantities of the GTSOFTX3000 delivery

accessories. The data and tools must be configured according to the customer's needs.

Software and software package are configured based on the versions.

The physical terminal software of the GTSOFTX3000 can be downloaded from the support

website by the customer service engineers.

6.2 Configuration List and Description of Auxiliary Equipment

6.2.1 Configuration List of Auxiliary Equipment

The auxiliary equipment refers to the alarm box. If the office is using Huawei equipment and

is configured with the alarm box, and the interface is available for connecting to the

MSOFTX3000, the alarm box is not required. Otherwise, the alarm box is mandatory. The

auxiliary equipment does not require the commissioning and can be delivered directly.

Therefore, the auxiliary equipment adopts the POC model.

If the BAM is connected to the alarm box, then the alarm box is connected to the alarm

subsystem through the RS232 serial cable. The 220 V AC power supply is adopted. The

cables for connecting the alarm box are 04043090, 04043091, and 04060374, whose lengths

are determined on the basis of the site survey.

For details on the configuration of the alarm box, refer to the relevant documents on the alarm

box design and configuration.


Part description: MSOFTX3000, Auxiliary Equipment




Table 6-2 Configuration list of the auxiliary equipment

SN. Part Number

Part Description Quantity Configuration Principle

1.

02100060 HERT MPE,WD2G1ALM,Universal Alarm

Box

1 Optional

The alarm box is

provided by the M2000

if the M2000 is

available. One alarm

box can be configured

depending on the

networking or

customer's requirement.

Whether the alarm box

is provided depending

on the customer's offer.

2. 04000361 Wireless,Alarm Box Cable Set 1 Optional

3.

04040705

China Power Cable 250V10A 6m,3PIN

Straight Plug

/227IEC53(RVV)3x0.75mm^2Black/3PIN

Left-angled Connector

1 Optional

The power cables

(04040705, 04020199,

04043082, 04043081,

and 04043083) are used

to supply power to the

alarm box. The power

cables (04020199,

04043082, 04043081,

and 04043083) are -48

V power cables whose

lengths need to be

decided by the site

survey. The power

cable 04040705 is a 220

4. 04020199 External Power

Cable,30.00m,0.8mm^2,Black,H4(5.08),18SJ

T(2C)B,2*H1,C&C08C,DL0945

1


Cable,40m,0.8mm^2,Black,H4(5.08),18SJT(2

C)B,2*H1,C&C08C

1


Cable,50m,0.8mm^2,Black,H4(5.08),18SJT(2

C)B,2*H1,C&C08C

1




SN. Part Number



Cable,60.00m,0.8mm^2,Black,H4(5.08),18SJ

T(2C)B,2*H1,C&C08C

1 V cable.

When installing the

alarm box, you must

pay attention to the

selection of power

cables and settings of

the power DIP

switches. The 220 V

AC power cable used is

6 meters long. The -48

V DC power cable is of

various lengths: 30m,

40m, 50m, and 60m;

the site survey will

determine the required

length. Before turning

on the alarm box, you

must check that the

power DIP switch is in

conformity with the

selected power type.

8. 04060374 Single Cable,GM12 Alarm Box RS232 Serial

Port

Cable,20.00m,MP8-I,CC4P0.5GY,D9F,GMS

C

1 Optional

The serial cables

(04060374, 04043090,

and 04043091) are used

to transmit signals

between the system and

the alarm box; the site

survey corresponding to

lengths of 20m, 30m,

and 40m respectively;

the site survey will

determine the required

length. The alarm box

of the GTSOFTX3000

is connected to the

serial port of the BAM

server or the

maintenance console

through the serial cable.

9. 04043090 Single Cable,RS232 Serial Port

Cable,30m,MP8-I,CC4P0.5GY,D9F+D9(PS)

1

10. 04043091 Single Cable,RS232 Serial Port

Cable,40m,MP8-I,CC4P0.5GY,D9F+D9(PS)

1

11. 50030082 Modem,56K/Data/Fax,External,Split

Type(DB25 To DB25,DB9)

Cable,English/Chinese Documents,220VAC

To 12VAC Transformer

1 Optional; if required,

one PCS is configured.

It is installed on the

emergency workstation

(02244508) to provide a

remote maintenance

interface.




SN. Part Number


12. 02244982 PC for Core Net(Middle-grade),Chinese OS 1 Mandatory, either one

PCS of 02234982 or

02244983

Both 02244982 and

02244983 are hardware

workstations of the

system, comprising the

desktop computer,

operating system, and

database software.

13. 02244983 PC for Core Net(Middle-grade),English OS 1 Mandatory, either one

PCS of 02234982 or

02244983

Both 02244982 and

02244983 are hardware

workstations of the

system, comprising the

desktop computer,

operating system, and

database software.

14. 04060263 Single Cable,MN straight through Conversion

Cable,1.00m,D25M,CC16P0.4P430U,D25M,

OptiX

1 Optional,

One PCS, if required, is

used together with the

modem.

15. 02100050 M900MSC,GM15ALMZ,Universal Alarm

Box(M)

1 Optional

It is the alarm box used

in MOTO delivery.

16. 02400420 PDF,-48VDC/1300A input,Chinese & English

Document,12 circuits 100A DC output,28

circuits 63A DC output,N68E cabinet PDF

Optional

The -48 V PDF needs

to be configured if the

customer cannot

provide multi-port -48

V power. The

installation accessories

kit for the PDF is the

same as that for the

service cabinet.




SN. Part Number


17. 02351368 Quidway

S2318TP-EI,CX4Z118AM,S2318TP-EI

Mainframe(16 10/100 BASE-T ports and 2

Combo GE(10/100/1000 BASE-T+100/1000

Base-X) ports and AC 110/220V)

2 The quantity is one by

default.

The matching power

cable needs to be

selected from 04000104

for use in a specific

country.

The GT server, BAM,

and iGWB need to be

configured with a

maintenance console,

thereby requiring one

PCS of 02351368.

A port is required for

connecting the GT

server to the external

network. If ports are not

sufficient, one more

PCS of 02351368 is

required.

18. 04070042 Signal Cable,EMU Monitor

Cable,30m,D9M,120CC4P0.4P430U(S),D15F

1 Optional with a

default length of 30m

It connects the host to

the EMU alarm box.

Customized lengths can

be provided according

to the site survey.

19. 25050101 Communication

Cable,100ohm,UL2919,26AWG,2P,PANTON

E WARM GRAY 1U,For OEM

1

20. 25050122 Twisted-Pair

Cable,100ohm,UL2464,0.32mm,28AWG,1P,P

ANTONE WARM GRAY 1U,Only For OEM

1

21. 30030442 Carton,DKBA8.865.0226,Carton,For Packing

MA5103,610*555*345

1

22. 33010007 Door Magnetic Switch,Always Open,Covert

Installation Type,50.8*14.3*12.7mm

1 Optional, sensors for

02100054

If the alarm box is

provided, these four

sensors must also be

provided.

23. 33010089 Liquid Level Sensor-D18*77mm-Cable

Length 2700mm Chinese Documents

1

24. 33010286 Temperature And Humidity

Sensor,15V–24VDC,-20–80degC/0~100%RH,

+/-0.8degC/+/-5%RH(15–50degC),4~20mA,C

hinese Documents

1




SN. Part Number


25. 33010293 Smoke Sensor,24V,Two Line, photoelectric

Smoke Sensor, Ceiling Fixed,Chinese

information,Terminal Dedicated

1

26. 02100054 BTS3606E,QCKG1EMU,BTS Environment

Monitor Unit

1 Optional

One PCS may be

configured according to

the networking or the

customer's requirement.

27. 04040662 Single Cable,Configure4875 Power -48V

Feeder

Cable,3.0m,2*T1.5^2R,16UL1015BL+16UL1

015B,2*T1.5^2R,MA5101

2 Optional

It is the power cable of

the EMU alarm box.

Two PCS are required.

Its length is to be

decided by the site

survey.

28. 04000279 External Cable Set,Onsite Cable,Kit of 6mm^2

Power Cable and Terminal

1 Optional

The length and

quantities will be

decided by the site

survey.

Power cables are

available in five colors:

blue, black,

yellow-green, red, and

green. 25030191

(yellow-green cable) is

used as the PGND

cable. The terminal to

be selected is

14170013; two PCS are

required for one PGND

cable.

25030191:

Wire,450/750V,60227

IEC 02(RV)

6mm^2,Yellow And

Green,44A

14170013: Naked

Crimping

Terminal,OT,6mm^2,M

8,Tin Plating,Insulated

Ring

Terminal,12-10AWG,y

ellow

29. 02315200 Datacom Products,DP0M0SFP,Optical

Transceiver,SFP,GE,Single-mode

Module(1310nm,10km,LC)

0 It is an optical module,

not configured.

30. 02315204 Datacom Products,DP0M0ESFP,Optical

Transceiver,ESFP,GE,Multi-mode

Module(850nm,0.5km,LC)


not configured.




SN. Part Number


31. 02315206 Datacom Products,DP0M2ESFP,Optical

Transceiver,ESFP,GE,Single-mode



not configured.





not configured.





not configured.





not configured.

6.3 Configuration List and Description of External Cables

6.3.1 Configuration List of External Cables


Part description: SoftX3000, Voice Module External Cable Set




Table 6-3 Configuration list of external cables

SN.

Part Number

Part Description Quantity

Configuration Principle

1. 1 04000336 External Cable Set,On-site Processing 25mm^2 Power Cable

Pack(Including (6*OT25-8)+(4*T25^2BR)+(4*OT25-6))

Optional It refers to

the coiled

power

cable,

which is

used to

route power

from

outside the

cabinet.

Four colors

are

available:

blue, black,

red, and

yellow-gree

n;

inflammatio

n-resistant

wires in a

size of

25mm^2 are

used. The

length of

each cable

will be

determined

by the site

survey.

2. 04040446 Trunk

Cable,BSC6800,20m,75ohm,8E1,2.2mm,D50M-II,2*SYFVZP75

-1.2/0.25*8(S),BSC6800

Optional

3. 04040447 Trunk

Cable,BSC6800,30m,75ohm,8E1,2.2mm,DB50M-II,2*SYFVZP

75-1.2/0.25*8(S),BSC6800

Optional

4. 04040448 Trunk


-1.2/0.25*8(S),BSC6800

Optional

5. 04040449 Trunk


-1.2/0.25*8(S),BSC6800

Optional

6. 04040450 Trunk


-1.2/0.25*8(S),BSC6800

Optional




SN.

Part Number



7. 04040582 Single Cable, Conversion

Cable,3m,2*SMB75SM-IV,120CC2P0.4P430U(S)+2*SYFVZ75

-1/0.25,MP8-II,Expert 2.0

Optional

4PCS

8. 04041486 Trunk

Cable,20m,120ohm,8E1/8T1,0.5mm,D50M-II,2*120CC8P0.5P4

30U(S),CBSC

Optional

9. 04041487 Trunk


30U(S)

Optional

10. 04041488 Trunk


30U(S)

Optional

11. 04041489 Trunk


30U(S)

Optional

12. 04041490 Trunk


30U(S)

Optional

13. 04042277 Trunk

Cable,10m,120ohm,8E1/8T1,0.4mm,D50M-I,2*120CC8P0.4P43

0U(S)

Optional

14. 04042278 Trunk


0U(S)

Optional

15. 04042279 Trunk


30U(S)

Optional

16. 04042280 Trunk


0U(S)

Optional

17. 04042281 Trunk


0U(S)

Optional

18. 04042282 Trunk


0U(S)

Optional

19. 04042283 Trunk


0U(S)

Optional




SN.

Part Number



20. 04044335 Trunk

Cable,155M/Clock/Lightning,10m,75ohm,3.9mm,SMB75SF-IV,

SYV75-2/0.34(S)

Optional

21. 04044336 Trunk


SYV75-2/0.34(S)

Optional

22. 04044337 Trunk


SYV75-2/0.34(S)

Optional

23. 04046698 Single Cable,Clock

Cable,5m,MP8-VI,CC4P0.48B(S),MP8-VI,Subtending Cable for

MSOFTX3000

Optional

4PCS


Cable,10m,MP8-VI,CC4P0.48B(S),MP8-VI,Subtending Cable

for MSOFTX3000

Optional

4PCS


Cable,20m,MP8-VI,CC4P0.48B(S),MP8-VI,Subtending Cable

for MSOFTX3000

Optional

4PCS

26. 04060171 Trunk Cable,155M

Self-Loop,5m,75ohm,4.0mm,SMB75SF-IV,SYV75-2/0.34(S),S

MB75SF-IV,OptiX

Optional

4PCS

27. 04060321 Trunk


SYV75-2/0.34(S)

Optional

28. 04060322 Trunk


SYV75-2/0.34(S)

Optional

29. 04070009 Signal Cable,Shielded Straight Through

Cable,5m,MP8-II,CC4P0.5GY(S),MP8-II,FTP

Optional

2PCS



Optional

2PCS



Optional

2PCS



Optional

2PCS

33. 04120141 Trunk

Cable,25m,75ohm,8E1,2.2mm,D50M-II,2*SYFVZP75-1.2/0.25*

8(S)

Optional




SN.

Part Number



34. 04120142 Trunk


8(S)

Optional

35. 04120143 Trunk


8(S)

Optional

36. 04025303 Single Cable,Clock Test

Cable,1.22m,SMB75SF-IV,SYV75-2/0.34(S),SMB75SF-IV,BIT

S,DL4140

Mandator

y

Four PCS

are required

for the

cabinet

02112626.


Cable,1.6m,MP8-VI,CC4P0.48B(S),MP8-VI,Subtending Cable

for MSOFTX3000

Optional It is used to

connect the

first

expansion

subrack to

the basic

subrack.

Four PCS

are required

for each of

the cabinet

02112626.

38.

04070002

Signal Cable,Shielded Crossover Network

Cable,0.7m,MP8-II,CC4P0.5GY(S),MP8-II,FTP

Optional It is used in

the NTP

network for

connecting

the WCKIc

and

WHSC.

It is

required if

the WCKIc

is provided.

Quantity =

Number of

WCKIc

boards x 2

39. 04070108

Signal Cable,Shielded Straight Through

Cable,8.0m,MP8-II,CC4P0.5GY(S),MP8-II,FTP

Optional

6.3.2 Configuration Description of External Cables

1. 04040446, 04040447, 04040448, 04040449, 04040450, 04042277, 04042278,

04042279, 04042280, 04042281, 04042282, 04042283, 04120141, 04120142, and 04120143: They are 75-ohm and 120-ohm trunk cables for EPI boards. One end of the




cable is the DB50 connector; the connector at the other end and the length of the cable

need be determined on the basis of the site survey. The connector used at the other end

must be made on site. The principle for configuring the trunk cable is as follows:

configure one trunk cable for a pair of EPI boards and connect the cable to the active

EPI board. Quantity: Number of EPI boards with the corresponding impedance/2.

Note that the 75-ohm and 120-ohm cables must be calculated separately. The

connector of the E1 line on the DDF side is provided by the cable rack. The 120-ohm

trunk cable is delivered on the basis of the site survey. If there is no specific

requirement, 0.4mm-core cables are delivered by default. These trunk cables are

delivered to the markets outside china.

2. 04044335, 04044336, 04044337, 04060322, and 04060321 are trunk cables for

connecting to the BITS clock device. These cables are used to obtain the clock source

from the synchronization system. Quantity = Number of CKI boards x 2. The length

of the cable need be determined on the basis of the site survey.

3. Cables of 04070108, 04070009, 04070012, 04070013, or 04070015 or longer cables

are used to connect the WCKIc to the NTP network. Quantity = 2 PCS

4. 04060171 and 04040582 are 120-ohm BITS clock cables. 04060171 is mandatory for

connecting to the WCKI board; four PCS are required. 04040582 is used for

connecting to the BITS device; four PCS are required. For 04040582, an order is

required for customized length (120-ohm twisted pair cable).

5. 04041486, 04041487, 04041488, 04041489, and 04041490 are 120-ohm trunk cables

with the 0.5 mm core, which are used for the WEPI board.

The lengths of external cables need be determined on the basis of the site survey. If, according

to the site survey, the cable required is longer than the length specified in the list, select the

cable with the maximum length in the list, and record the actually required length of the cable.

The dispatching personnel will be responsible for arranging the trial production of the cable.

6.4 Configuration List and Descriptoin of the Installation Suite

6.4.1 Configuration List of the Installation Suite


Part description: IMS 5.0,Installation Suite of N68E-22 Cabinet

Table 6-4 Configuration list of the installation suite

SN. Part Number

Part Description Quantity and Configuration Principle

1 21050279 DKBA4.120.1183MX,N68E Side

Door,N68E-22 Cabinet,2395*285*85

Optional

Two PCS are required for each row

of cabinets. The quantity required

depends on the site survey.




SN. Part Number


2 21150584 DKBA4.070.0722MX,N6X Cement Floor

Mount Kit,For Mount in Cement

Floor,Cement Floor Mount structure

One PCS is required for each

cabinet that stands on the cement

floor. The quantity required


3 21101201 Q/DKBA8.088.0783,Installation Marking

Template,N68-22 Cabinet(Cement Floor)


cabinet that stands on the cement



4 21100577 Non-metallic

Component-Q/DKBA8.088.0784-Installation

Marking Template -N68-22 Cabinet

(Antistatic floor)


cabinet that stands on the antistatic



5 21150568 DKBA4.070.0711MX,N6X Unitary Support

Mount Kit I(Adjustable Height

296–465mm),For mounting on antistatic

floor,Support

It is used to support the cabinet that

stands on the antistatic floor. It is

selected depending on the height of

the antistatic floor (the height refers

to the distance between the

antistatic floor and the ground).

Two options are available. Two

PCS are required for each cabinet.

The quantity required depends on

the site survey.

6 21150569 DKBA4.070.0718MX,N6X Unitary Support

Mount Kit II(Specific Height

H>=100mm),For mounting on antistatic

floor,Support

7 21150572 DKBA4.070.0670MX,Top Fixing Mount

Kit,For the top of cabinet fixed,Engineer

Installation Structure

It is used for the connection

between the equipment and the

cable rack and for securing devices.

It is not delivered by default. If

there are N cabinets in a row, N+1

PCS are required.

8 21150223 Support,400mm Wide Wire Trough

Component

It is not delivered by default but can

be provided depending on the site

survey. The wire trough is two

meters long. It must be used

together with the wiring ladder.

9 21150259 Q/DKBA4.070.0236MX,Rack Shockproof

Reinforcement Components,All Racks

It is used for reinforcement and

quake-proof purposes by connecting

the top of the equipment to the

ceiling or walls. It is not delivered

by default. The quantity required

depends on the site survey. One

PCS is required for each cabinet.

10 21150483 DKBA4.070.0484MX,400mm Wiring

ladder,Roll molding,Hang or Support(indoor)



survey. The wiring ladder is 2.5

meters long. It is not delivered to

the Shelter telecom room.




SN. Part Number


11 21150485 DKBA4.070.0490MX,Wiring ladder Indoor

Accessories and Consumable Kit, Roll

molding



survey.

12 28010026 Insulation Material,Fireproof PVC

Corrugated Tube,D25



survey.

13 29050406 DKBA8.817.2045,PDF

Film(Door),RNC,89mmX39mm,0.25

LEXAN 8B35/3M467

Two PCS are required if the DC

PDF is in use.

6.4.2 Configuration Description of the Installation Suite

Doors and supports are mandatory. In principle, other installation suites in the table can be

selected according to the site survey.

6.5 Configuration List of the N68E PDF Installation Suite


Part description: Installation Suite of N68E-PDF

Table 6-5 Configuration list of the PDF installation suite

SN. Part Number


1 21500419 DKBA4.120.1208MX,Front Door

Suite,N68E/N610E Cabinet(With

Air Filter and

Packaging),740X130X2255

One PCS is configured for

each PDF. If the site

survey indicates that a

dual-door is required,

99040UVT is delivered,

and two PCS are

configured for each PDF.

2 02237345 HLR9820,NGN PDF N68E Rack

Installation Suite

Also called installation

accessories kit

One PCS is required for

each PDF.







6.6 Configuration List and Description of Network Accessories

6.6.1 Configuration List of Network Accessories


Part description: Wireless Network Product Line,Network Accessories

Table 6-6 Configuration list of network accessories

SN. Part Number

Part Description Quantity Remarks

1. 25050014 Twisted-Pair Cable,100ohm,,Category 5e

UTP,0.51mm,24AWG,8Cores,PANTONE 430U,Use

with Plug:14080082

1m Optional

2. 14080082 Network Interface Connector,8Bit 8Pin,Crystal

Plug,Matching 25050014

1PCS Optional

3. 02235830 Network Accessories,Shield,Crossover Network Cable 1PCS Optional

4. 02235829 Network Accessories,Shield,Straight Through Cable 1PCS Optional

5. 14080097 Network Interface Connector,8-Bit

8PIN,Shielded,Crystal Model Connector,Matching

25050057

1PCS Optional

6. 14990086 Connector Accessories,Shielded Moudlar 8P8C Plug

Gray Protection Boot,14080097,1:1,For OEM

1PCS Optional

7. 25050057 Twisted-Pair Cable,100ohm,Category

5e,FTP,0.52mm,24AWG,8Cores,4Pairs,PANTONE

430U,Use with Plug:14080097

1m Optional

6.6.2 Configuration Description of Network Accessories

Network accessories include the wire, terminals, tools that are used to make network cables

on site.

25050014 Twisted-Pair Cable,100ohm,,Category 5e

UTP,0.51mm,24AWG,8Cores,PANTONE 430U,Use with Plug:14080082

14080082 Network Interface Connector,8Bit 8Pin,Crystal Plug,Matching 25050014

25050014 and 14080082 are used to make ordinary network cables on site. They are

provided according to the site survey.

02235830 Network Accessories,Shield,Crossover Network Cable

02235829 Network Accessories,Shield,Straight Through Cable

02235830 and 02235829 are length-fixed network cables and are not configured by

default. The length and quantity of the cable required are determined on the basis of the

site survey.




14080097 Network Interface Connector,8-Bit 8PIN,Shielded,Crystal Model

Connector,Matching 25050057

14990086 Connector Accessories,Shielded Moudlar 8P8C Plug Gray Protection

Boot,14080097,1:1,For OEM

25050057 Twisted-Pair Cable,100ohm,Category

5e,FTP,0.52mm,24AWG,8Cores,4Pairs,PANTONE 430U,Use with Plug:14080097

25050057, 14080097, and 14990086 are used to make shielded network cables on site.

They are not delivered by default but can be provided according to the site survey.


Manual CONFIDENTIAL



7 Expansion and Upgrade Configuration

7.1 Expansion Method and Configuration Description

7.1.1 Expansion Method and Rule

The GTSOFTX3000 V100R001C06 can be expanded through the license and the addition of

subracks and boards.

Five configurations of the GTSOFTX3000 involve different quantities of boards:

Configuration for 1,000 subscribers: one pair of WCSU/WEPI, one pair of WIFM/WBFI,

and one pair of WBSG

Configuration for 5,000 subscribers: two pairs of WCSU/WEPI, one pair of

WIFM/WBFI, and one pair of WBSG.

Configuration for 10,000 subscribers: two pairs of WCSU/WEPI, two pairs of

WIFM/WBFI, and one pair of WBSG

Configuration for 50,000 subscribers: two pairs of WCSU/WEPI, two pairs of

WIFM/WBFI, and two pairs of WBSG

Configuration for 100,000 subscribers: two pairs of WCSU/WEPI, three pairs of

WIFM/WBFI, and two pairs of WBSG

7.1.2 Materials to Be Used in the Expansion

Most of the materials listed in 3.3 will be used in the expansion. All the materials in the

configuration list in 3.3 are Optional

The materials to be used in the expansion include the cabinet, subrack, board, and cables, and

the configuration principles previously described apply.

7.1.3 Expansion Precautions

1. Do not neglect various cables that will be used in the expansion.

2. The lengths of cables are determined on the basis of the site survey.

3. It is common that the UMG8900 transmits signaling between the GTSOFTX3000 and

other offices. Therefore, the expansion may require more signaling links between the

GTSOFTX3000 and other offices, and the UMG8900 needs to be expanded

accordingly. For details, see the relevant description in the UMG8900 configuration

manual.




7.2 Upgrade Method and Configuration Description

7.2.1 Upgrade Method and Rule

Generally, the hardware upgrade is implemented through board replacement; the software

upgrade is implemented through software loading. For details on the software upgrade, see the

upgrade guide released along with the version. The following sections mainly describe the

hardware upgrade.

1. Collect hardware information from the site and determine the hardware required for

the upgrade.

2. Ensure that the new hardware, compared with the old hardware, is enhanced in terms

of capacity and performance.

7.2.2 List of the Hardware to Be Upgraded

None

7.2.3 Precautions for Parts Replacement

1. Replacing parts may require changing the interface. In this case, accessories such as

cables may need to be replaced.

2. Follow the instructions in the upgrade guide during parts replacement to minimize the

impact on services.

7.3 Replacement Strategy for Earlier Hardware

The software of GTSOFTX3000 may run on either the 750B or 750C boards. Only the 750C

boards are now used in delivery.


Manual CONFIDENTIAL



8 Appendix

8.1 Traffic Model Calculation Tool

For the method of calculating system capacity based on the number of subscribers and traffic

model, see

8.2 Acronyms and Abbreviations of Board Names

Table 8-1 Acronyms and abbreviations of board names

Abbreviation Full Spelling

WSMU System Management Unit

WEPI E1_Pool Interface Unit

WSIU System Interface Unit

WALU Alarm Unit

WCKI ClocK Interface unit

WHSC Hot-Swap and Control Unit

WBAI Back insert Atm Interface unit

WBFI Back insert FE Interface unit

WAFM ATM Forward Module

WIFM IP Forward Module

WCCU Calling Control Unit

WCSU Calling Control and Signaling process Unit

WEAM E1 ATM forward Module

WBSG Broadband Signaling Gateway

WSGU Signaling Gateway Unit





WCDB Central Data Base unit

WVDB VLR Data Base unit

WMGC Media Gateway Control unit

UPWR Universal Power

Note that the letter W at the beginning of the board name represents wireless.


Manual CONFIDENTIAL



9 Acronyms and Abbreviations

Table 9-1 Acronyms and abbreviations


AAL ATM Adaptation Layer

AAL2 ATM Adaptation Layer type 2

ALU Alarm Unit

AMR Adaptive multi Rate

ARP Address Resolution Protocol

BAIC Barring of All Incoming Calls

BAM Back Administration Module

BAOC Barring of All Outgoing Calls

BAU Bill Administration Unit

BFI Bad Frame Indication

BIC-Roam Barring of Incoming Calls When Roaming Outside Home PLMN

Country

B-ISDN Broadband Integrated Services Digital Networks

BOIC Barring of Outgoing International Calls

BOIC-exHC Barring of Outgoing International Calls except those directed to

the Home PLMN Country

BSSAP Base Station Subsystem Application Part

CB Cell Broadcast

CCU Channel Codec Unit

CFNRc Call Forwarding on mobile subscriber Not Reachable

CFU Call Forwarding Unconditional

CLIP Calling Line Identification Presentation

CLIR Calling Line Identification Restriction





CODEC Coder-decoder

CoLP Connected Line Identification Presentation

CoLR Connected Line Identification Restriction

CPC Central Processing Board

cPCI

CPU Central Processing Unit

CUG Closed User Group

DDN Digital Data Network

DTMF Dual Tone Multi Frequency

ESP Early Support Program

EtherNet

FEP Front End Processor

FLASH FLASH memory

FTP File Transfer Protocol

GE Gigabit Ethernet

GLONASS GLObal NAvigation Satellite System

GMLC Gateway Mobile Location Center

HLR Home Location Register

HOLD Call Hold

HSC Hot Swap Controller

HSTP High-level Signaling Transfer Point

HW Highway

ICMP Internet Control Message Protocol

IDP Individual Development Plan

IFM IP Forward Module

IIN Integrated Intelligent Network

IMSI International Mobile Subscriber Identity

IN Intelligent Network

ISDN Integrated Services Digital Network

ISS Integrated Service Server





ITU-T International Telecommunication Union - Telecommunication

Standardization Sector

IU Iu Interface

IWF InterWorking Function

LAN Local Area Network

LSTP Low-level Signaling Transfer Point

MAP Mobile Application Part

MML Man Machine Language

MODEM MOdulator-DEModulator

MSISDN Mobile Station International ISDN Number

MSRN Mobile Station Roaming Number

MTP Message Transfer Part

MTP2 Message Transfer Part Layer 2

MTP3 Message Transfer Part Layer 3

MTP3b Message transfer part (broadband)

RARP Reverse Address Resolution Protocol

RDI Remote Defect Indication

SCTP Stream Control Transmission Protocol

SDF Service Data Function

SDH Synchronous Digital Hierarchy

SGU Software fault-oriented Group Unblocking message

TCU Temperature Control Unit

TDMA Time Division Multiple Access

TFO Tandem Free Operation

TMSI Temporary Mobile Subscriber Identifier

TUP Telephone User Part

UDI Unrestricted Digital Information

UDP User Datagram Protocol

UE User Equipment

UL Uplink

UMTS Universal mobile telecommunication services/Universal Mobile

Telecommunications System;





UPWR UMSC PSM PoWeR module

USSD Unstructured Supplementary Service Data

UTRAN UMTS Terrestrial Radio Access Network

VDB VLR Database

VIEU Versatile Interface Extend Unit

VLR Visitor Location Register

VMSC Visited Mobile Switching Center , Visited MSC

VPN Virtual Private Network

WAD Wireless Advertisement;

WCDMA Wide(band) Code Division Multiple Access

WIN Wireless Intelligent Network

GSM-R 3.2 GTSOFTX3000 Configuration Manual V1.5(20111122)

Documents

Transcript of GSM-R 3.2 GTSOFTX3000 Configuration Manual V1.5(20111122)