GSM module 3

7/28/2019 GSM module 3

http://slidepdf.com/reader/full/gsm-module-3 1/21

GSM Basics, Version 2.2 T.O.P. BusinessInteractive GmbH of 21

3 Network Architecture




3 Network Architecture ............................................................1

3.1 Network Elements and their Basic Functions .................3

3.1.1 Base Station Subsystem (BSS) (1/3) .............................4



3.1.2 Network Subsystem (NSS) (1/6).....................................7



3.1.2 Network Subsystem (NSS) (4/6)...................................10



3.1.3 Operation & Maintenance Subsystem (OMS) (1/2).....13

3.1.3 Operation & Maintenance Subsystem (OMS) (2/2).....14

3.1.4 Additional GSM Components (1/4) ..............................15




3.2 GSM Network Topology (1/3)...........................................19

3.2 GSM Network Topology (2/3)...........................................20 3.2 GSM Network Topology (3/3)...........................................21




3.1 Network Elements and their Basic Functions

For the subscriber, a mobile telephone call is a simple process. In reality, though, this call isonly possible thanks to a complex network architecture consisting of various differentnetwork elements. In this lesson, you' ll get to know the individual elements of the GSMnetwork and their basic functions.The Base Station Subsystem BSS provides the connection between the mobile stations andthe Network Subsystem NSS. The NSS forwards user signals to other mobiles via the BSSor subscribers in the Public Switched Telephone Network (PSTN), and provides necessarycustomer data. The Operation & Maintenance Subsystem (OMS) monitors BSS and NSSperformance, and remotely debugs occurring faults in the network elements. Additional components such as interface elements to data networks, the Short MessageService Center or the Voice Mail System complete the GSM system architecture.




3.1.1 Base Station Subsystem (BSS) (1/3)

The Base Station Subsystem ensures as complete a network coverage as possible and

includes a large number of structurally organised radio cells. It consists of the followingelements:

• The Base Transceiver Station• The Base Station Controller

and

• The Transcoder

The central element of one cell of this kind is a transmitting and receiving unit known as a

Base Transceiver Station (BTS). This makes the connection to the mobile station via the air interface and controls the transceiver (TRX). The transceiver, the central functional unit of the BTS, maintains calls to a maximum of 8 mobile stations via one frequency pair each. TheBTS is also responsible for the monitoring of the signal quality and the encoding andmodulation of useful signals. Via the A-bis interface, it forwards calls, signals and controlinformation destined for the OMS and the NSS to the Base Station Controller (BSC).





Several BTSs are controlled by the Base Station Controller, or BSC.This assigns free radio channels in the TRX for the link to the mobile station. It controls thenecessary output power for mobile station and TRX. It monitors the existing radio link to andfrom the mobile station and controls handover between neighboring radio cells if they areunder its control. During an existing radio connection, the BSC monitors its quality andcontrols disconnection of the radio link when the call is over. The BSC communicates withthe transcoder (TC) via the A-ter interface.





The transcoder is the third element in the BSS and is needed to convert 64 kbps originalspeech into a 16 kbps signal of speech description parameters to ensure a spectrum-efficientmodulation on the air interface. BTS, BSC and TC together form the Base Station Subsystem(BSS).




3.1.2 Network Subsystem (NSS) (1/6)

The Base Station Subsystem forwards the signals to the Network Subsystem (NSS) wherespeech and circuit-switched data are controlled and forwarded to other networks if necessary. The NSS provides data relevant to security and mobility.The speech signals processed by the transcoder reach the Mobile Services Switching Center (MSC) via the A interface. The MSC serves as a digital exchange for the forwarding of messages, connecting mobile subscribers with each other or with subscribers in other networks such as the Public Switched Telephone Network, the ISDN network, or datanetworks.





The MSC is responsible for the following functions:

-It forwards incoming and outgoing calls.

- It makes a connection to other MSCs in the same mobile radio network and makesconnections with other mobile radio networks and to fixed networks.

- It monitors and controls the calls.- It is responsible for call data acquisition and the forwarding of signalling information to

connected registers or data bases.- In order to monitor, route and control mobile telephone calls in GSM networks, several

registers are connected to the MSC.





One of these registers is the Visitor Location Register (VLR), which is usually to be found in

the MSC, but is a functional unit in its own right. It is designed as a dynamic subscriber filewith dedicated geographical areas of responsibility, the so-called Location Areas. The VLRacquires the data of all GSM customers in its areas and is always well informed of their whereabouts. It assists the MSC in the acquisition of charge-relevant data with subscriber information. The bills are prepared from these data in the Billing Center. But where does theVLR get the GSM customer data from?





For GSM customer data acquisition, there is a register, the so-called Home Location Register

(HLR), in which each network operator registers the customer data necessary for dealingwith traffic. The HLR supplies these data to all VLRs in which the GSM customers involvedare to be found at any given moment. Inversely, the VLR in question informs the HLR of thelocation area of the customer, and is thus able to give routing information when calls comein. The HLR data contain information on access rights with regard to roaming, service rightswith regard to voice, fax and data services, and additional subscribed services.





The Authentication Center (AuC) contains the customer data necessary to protect

connections against unauthorised access, and is mostly integral to the HLR. The AUCchecks the information stored in the Subscriber Identity Module, that is the SIM card, for correspondence with its own register. If the data proves to be identical, the authentication of the subscriber is successful, and he is given permission to enter the network. If the SIM cardis stolen, authorisation to access the network is disabled very easily via the AUC. Additionally, the AUC provides necessary information to cipher the air interface.





The Equipment Identity Register (EIR) can be implemented as an option by the network

operator. The EIR permits the detection of stolen terminal equipment used in GSM networksby checking the IMEI (International Mobile Equipment Identity) against the data stored in theEIR. This check is carried out independently of the SIM card, and only applies to the mobilestation in question. All the components which control and forward the call, and are responsible for security andmobility management, that is the MSC, HLR, VLR, AUC and EIR, form the NetworkSubsystem (NSS).




3.1.3 Operation & Maintenance Subsystem (OMS) (1/2)

The GSM network is monitored and controlled from a central point. This is the Operation andMaintenance Center (OMC).The OMC has the following tasks:1. The Fault Management system analyses alarms from the BSS elements. When faultsoccur, they are eliminated when necessary via software command or in situ by technicians.2. The Configuration Management function installs the software when new BSS networkelements are implemented, manages hardware inventory lists, and changes operationparameters, for example for radio frequencies of a BTS.3. The Software Management system feeds in new software or updates and manages thesoftware inventory lists.




3.1.3 Operation & Maintenance Subsystem (OMS) (2/2)

The Network Management Center (NMC) assumes special functions in the context of OMSwhich are not defined in the GSM standard but are based on definitions of the InternationalStandardisation Organisation (ISO), and on recommendations of the InternationalTelecommunication Union (ITU). An NMC carries out functions of Performance Management

• Alarms and fault elimination times are evaluated statistically.• Capacity bottlenecks in the network are detected.

and• The service quality is monitored, for example the Dropped Call Rate in percent.

Depending on the network operator, the NMC functions are carried out in acentralised or decentralised way in the geographical areas.

All NMC and OMC of a certain defined geographical area form the third subsystem, theOperation and Maintenance Subsystem, or OMS.The three subsystems BSS, NSS and OMS are vital for the operation of a GSM network. Theinterfaces within and between the subsystems are mostly specified by the ETSI.




3.1.4 Additional GSM Components (1/4)

For dealing with customer support and supplying certain services, GSM includes a number of

additional components. The Administration & Billing Center ABC transfers customer data tothe appropriate registers of the NSS and into the AUC and the HLR. The AdministrationCenter is connected to the Personalization Center for SIM Cards (PCS) via an interface. Thismakes it possible to disable the SIM card if necessary and protect it from abuse. The so-called Call Detail Records are used in the Billing Center for bill preparation.





The Voice Mail System (VMS) is a memory system for voice, data and fax messages spreadover the network, i.e. a large-scale answering machine. If a subscriber has switched off hismobile station or can't be reached for other reasons, the messages are not sent to his mobilestation but are fed directly into the VMS and stored there. The subscriber can either requestthem from the VMS or he is notified via SMS. The VMS can have interfaces to several MSCsand to the Short Message Service Center.





Via the Short Message Service Center (SMS-C), network operators, service providers andprivate customers can send short messages directly onto the mobile station of anysubscriber. In the SMS-C, the short messages are stored temporarily and forwarded to therecipient.Point-to-point short messages are alphanumerical messages with a maximum basic length of 160 characters, which are entered directly via the keyboard of the mobile phone.Compression and concatenating techniques increase the number of transmitted characters.The Cell Broadcast SMS, i.e. the service offering point-to-multipoint short messages, is a"one-way" communication from the network to all mobile phones in certain geographicalareas. The messages with a basic length of 93 alphanumerical characters are entered in theOMC, fed centrally into the BSC, and transmitted to the mobile stations via all connectedBTSs at regular intervals.





In order that data can be fed into the GSM network from packet-switched networks such asthe Internet or company Intranets, a so-called Interworking Function (IWF) is required. This isan external data server connected to the different data networks. The IWF translates theunstructured incoming packet-switched data into circuit-switched signals which can beunderstood by GSM. A firewall upstream of the IWF protects the GSM network fromunauthorised access by hackers.In GSM Phase 2, only circuit-switched data services are supported. The InterworkingFunction (IWF), integral to the MSC, connects the circuit-switched GSM data traffic to theexisting packet-oriented networks, in other words, the Internet, corporate networks, publicdata networks and WAP servers. It converts protocols and adapts the data rate for the BSS.




3.2 GSM Network Topology (1/3)

In GSM, the Public Land Mobile Network (PLMN) is a cellular network with a hierarchicalstructure.The smallest unit is the radio cell, which the BTS supplies with frequencies, or, in other words, radio channels. It provides the network coverage. Several radio cells are put together to form administrative areas controlled by a BSC. Various areas controlled by one BSC eachform a location area controlled by a VLR. It is also possible for a Location Area to cover oneBSC only, or even one cell, if reasonable. If a mobile phone subscriber changes to a newLocation Area, a Location Update takes place automatically, so the location of the subscriber is known to the network via a VLR linked to the MSC.





If a BTS is in the centre of exactly one cell, we speak of an omnidirectional radio cell. TheBTS transmits its frequencies with omnidirectional characteristics and a high output.

Omnidirectional radio cells are used particularly in relatively sparsely populated rural areas.In densely populated areas, though, the network must supply higher capacities. One way of doing this is the sectorization of radio cells. With a sectored radio cell, the BTS can supply upto three radio cells in 3 times 120 degrees with several frequencies each.On motorways, Base Transceiver Stations are preferentially configured in 2 sectors. For example, the BTS transmits frequencies in two times 180 degrees. The cell is aligned alongthe course of the road to be covered.



GSM Basics Version 2 2 T O P BusinessInteractive GmbH of 21


In densely populated cities, we often find a combination of omnidirectional cells and sector cells. This is because there can often be zones of missing coverage between sector cells. A

superordinated omnidirectional umbrella cell takes over the radio supply for scatteredindividual mobile stations located in these locally occurring receptionless zones and for rapidly moving mobile stations used on motorways and in high-speed trains. Rapidly movingmobile stations in particular are supplied via the larger umbrella zones, in order to avoid asfar as possible handovers taking place in rapid succession.In order to supply areas with a large number of mobile phone users, so-called microcells areused.Thus, for example, BTS with a low output are used in underground stations. These take over the radio supply on the platform or, with special antennae, in the subway tunnels.

GSM module 3

Documents

Transcript of GSM module 3