GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM...
Transcript of GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM...
![Page 1: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/1.jpg)
GSM Base and RoverConfiguration Example
for TRIUMPH-1, SIGMA, and GISmore Receivers Version 1.1
Last Revised August 18, 2009
All contents in this manual are copyrighted by JAVAD GNSS.All rights reserved.The information contained herein may not be used, accessed, copied,
stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express written consent from JAVAD GNSS.
![Page 2: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/2.jpg)
www.javad.com
![Page 3: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/3.jpg)
GSM BASE & ROVER CONFIGURATION EXAMPLE
Base Station Configuration1. Start ModemVU.
2. Select TRIUMPH-1X Internal Radio1 and click OK (Figure 2-1).
Figure 2-1. ModemVU. Options window
1. For SIGMA receiver select SIGMA; for GISmore select GISmore
3www.javad.com
![Page 4: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/4.jpg)
GSM Base & Rover Configuration ExampleBase Station Configuration
3. Select the port receiver is connected to and click Connect (Figure 2-2).
Figure 2-2. ModemVU. Connection
4. Set the Radio and GSM parameters to OFF and click Apply.
5. Click Connect GSM button (Figure 2-3).
Figure 2-3. ModemVU ALPHA Internal Radio selection
6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4):
Figure 2-4. Master/Slave tab settings
• Dial number: empty• Send Time Out: 2• Receive Time Out: 5
4 www.javad.com
![Page 5: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/5.jpg)
GSM Base & Rover Configuration ExampleBase Station Configuration
7. In the General tab insert your SIM card PIN code (if needed), then set the mode to Slave,and click Apply.
Figure 2-5. General tab settings
8. Wait until the modem will establish connection with net. The Modem status will beready (at first detecting, registration, than ready).
Figure 2-6. Modem status “ready”
9. Quit ModemVU by clicking Exit button.
5www.javad.com
![Page 6: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/6.jpg)
GSM Base & Rover Configuration ExampleBase Station Configuration
10. Start TriVU. Select port the receiver is connected to and click OK (Figure 2-7).
Figure 2-7. TriVU. Selecting port
11. Click Configuration Receiver.
12. In the Base tab click the Get from receiver button. Reference geodetic coordinates appear.Click Apply (Figure 2-8).
Figure 2-8. Base tab
6 www.javad.com
![Page 7: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/7.jpg)
GSM Base & Rover Configuration ExampleBase Station Configuration
13. In the Ports tab Serial subtab set the Port B Output mode to RTK CMR, and click Apply,then OK (Figure 2-9).
Figure 2-9. Rover tab
14. Quit TriVU.
7www.javad.com
![Page 8: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/8.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
Rover Configuration1. Start ModemVU.
2. Select Triumph 1X Internal Radio1 and click OK (Figure 2-10).
Figure 2-10. ModemVU. Options window
3. Select the port receiver is connected to and click Connect (Figure 2-11).
Figure 2-11. ModemVU. Connection
4. Set the Radio and GSM parameters to OFF and click Apply.
1. For SIGMA receiver select SIGMA; for GISmore select GISmore
8 www.javad.com
![Page 9: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/9.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
5. Click Connect GSM button (Figure 2-12).
Figure 2-12. ModemVU TRIUMPH Internal Radio selection
6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4):
Figure 2-13. Master/Slave tab settings
• Dial number: phone number of the Base station’s SIM card.• Send Time Out: 2• Receive Time Out: 5
9www.javad.com
![Page 10: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/10.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
7. In the General tab insert your SIM card PIN code (if needed), then set the mode toMaster, and click Apply;
Figure 2-14. General tab settings
8. Wait until the modem will establish connection with net: the Modem status will be at firstdetecting, than registration. Wait until the connection with the Base will beestablished: the Modem status will be at first dialing, than connected with theconnection baud rate value.
Figure 2-15. Modem status “connected”
9. Quit ModemVU by clicking Exit button.
10 www.javad.com
![Page 11: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/11.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
10. Start TriVU. Select port the receiver is connected to and click OK (Figure 2-7).
Figure 2-16. TriVU. Selecting port
11. Click Configuration Receiver.
12. In the Positioning tab set RTK fixed Mode, then click Apply (Figure 2-17).
Figure 2-17. Positioning tab
11www.javad.com
![Page 12: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/12.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
13. In the Rover tab set RTK fixed mode (Figure 2-18), then click Apply:
Figure 2-18. Rover tab
14. In the Ports tab Serial subtab set the Input mode for port C to CMR, then click Apply andOK (Figure 2-19).
Figure 2-19. Ports tab
12 www.javad.com
![Page 13: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/13.jpg)
GSM Base & Rover Configuration ExampleRover Configuration
15. The receiver will obtain the RTK Fixed solution (Figure 2-20).
Figure 2-20. TriVU. RTK fixed
13www.javad.com
![Page 14: GSM Base and Rover - download.javad.comdownload.javad.com/manuals/how-to/GSM_Base_and... · GSM Base & Rover Configuration Example Base Station Configuration 4 3. Select the port](https://reader030.fdocuments.in/reader030/viewer/2022040908/5e8060a988488170be05525c/html5/thumbnails/14.jpg)
1731 Technology Drive, San Jose, CA 95110 USAPhone: +1(408)573-8100Fax: +1(408)573-9100
www.javad.com
Copyright © JAVAD GNSS, Inc., 2009All rights reserved. No unauthorized duplication.