GSA Price List V12 - Enwork · GSA Price List V12 Effective July 2, 2018 [email protected]...

GSA Price List V12 Effective July 2, 2018

www.enwork.com

[email protected]@[email protected]

Tables & Support Furniture Steel Casegoods

Laminate Casegoods Benching Environments

3

intr

od

uc

tio

n COM Yardage 16Contact Information - Sales and Customer Service Center 11Damages and Returns 15Finishes 22Finish Edge and Color Defaults 21Freight and Minimum Quantities 13 Shipping Claims and Damages 15GSA and State Contracts 11Lead Times 13Lock Program 17Ordering and Shipping 12-13Pricing Policy 13Product Information 20-21 Specifications 28-31Tables of Contents By Application and Product Type 6 By Enwork Product Line 3Terms and Conditions 13Warranty 14

Note: For the most current information go to www.enwork.com

Affinity™ Laminate Casegoods 249-271 Desk Shells & Supports 252-259 Mobile Storage 265 Reception 260 Storage 260-271Ambition™ 274-295 Apex™ Steel Casegoods 227-247, 363 Desks and Desk Shells 240-247 Mobile Storage 237, 363 Storage 230-239, 363Concurrence 74-84 Conference Base Assemblies and Bases w/ Build-Your-Own Bases & Beam Trough Kits 74-79 Monitor Walls 84 Video Sharing (VS) Tables, Cabinets and VS Power/Data Units 80-83Designer Finishes 40-51, 66-67Disc Bases 86-87Foundation 92-109, 196-198 Conference Bases and Base & Trough Assemblies 92-95, 106-109 Credenzas 196-197 Lecterns 198Grid Benching Environments 298-362 Electrical Components 340-341 End Panels 337 Frames 318-327 Frame Supports and Connectors for Workstations 334-335 Landscape Storage 360-362

co

nte

nts

by

pr

od

uc

t n

am

efo

rc

onte

nts

bypr

oductty

pe,se

epa

ge

6

4

co

nte

nts

by

pr

od

uc

t n

am

efo

rc

onte

nts

bypr

oductty

pe,se

epa

ge6 Screens – Privacy, Topper, Modesty 352-356

Steel Storage 362-363 Tiles 328-333 Worksurfaces 342-350 Worksurface Supports for Workstations 336-337 Worktools 359Impression 112-129, 200-202, 218 Adjustable-height Table Bases and Legs 117, 120 Café (Bar Height) 122-123 Classroom Tables 128-129 Conference TT- Legs 114 Credenzas 200 Flipping and Nesting Bases 113 Folding Legs 112 Lecterns 202 Occasional Tables 218 Powerlex Training Tables 118, 129 Set Screw 117, 120 Straight, C-, T-, X-, and O-legs 112, 116, 120-123Landing 130-131Landscape Storage 360-362Lugano 132-133Occasional Tables 218, 391 Perimeter Whiteboards 224Power Data Assemblies 182-193Ritz 134Sawhorse 136 Conference Bases 136 Training Table Legs 136Sensation 138-144, 206-207 Adjustable-height Table Legs and Bases 138, 141-142 C-, T-, Y-, and X-legs 138, 140-142 Café (Bar Height) 140 Credenzas 206-207 Conference Bases 138, 144 Flipping and Nesting Legs and Bases 139, 141, 143 Folding Legs 138 Lecterns 206Screens, Modesty Panels & Accessories 220-223 Solano (formerly Captiva) 146-161 Adjustable-height Table Bases and Legs 150, 156-158 Café (Bar Height) 152-1453 Classroom Tables 160-161 Conference TT- Legs 148 Flipping and Nesting Bases 147 Folding Legs 146 Powerlex Training Tables 151, 161

5

Set Screw 150 Straight, C-, T-, and X-legs 146, 150, 152-153 VT-Series Electric Bases 156 XT-Series ANSI/BIFMA Electric Bases 157-158Square Bases 86Statement 40-51, 66, 162 Bases 162 Designer Finish Tops 40-51, 66Stealth 164-169, 208 Conference Table Base and Trough Assemblies 164-166 Credenzas 208 Team Tables 168-169Table Tops 32-71Universal Support Furniture 219 Cabinets 219 Carts 219Value 170-171 Adjustable-height Table Bases 171 Folding & Flip Legs 170-171 Straight, C-, H-, T-, TT-, and X-Legs 170-171Zori 172-181 C-, T-, Y-, and X-legs 172, 176-178 Café (Bar Height) 176 Credenzas 211 Conference Bases 176, 180-181 Flipping and Nesting Legs and Bases 174-175, 179 Folding Legs 172 Lecterns 212 Occasional 218 Teacher Desks 216-217

co

nte

nts

by

pr

od

uc

t n

am

efo

rc

onte

nts

bypr

oductty

pe,se

epa

ge6

6

Accessories Cable Managers 314-315, 358 Magnets 224 Steel Drawer & Accessories 243 Whiteboards 224 Work Tools and Trays 359Adjustable-Height Tables (see Tables – Adjustable-height Legs)Bases (see Tables – Bases and Legs)Benching Systems Adjustable-Height Workstations (crank, electric, knob) 274-295 Workstations 298-359Bookcases Laminate 251, 264-265, 271 Steel 229, 233, 360-362Cabinets Laminate 251, 264-266, 270-271 Steel 229-231, 234, 239Café (Bar Height) Table Bases 86-87, 120, 122-123, 136, 140, 152-153 Carts 219Casegoods Laminate 249-271 Steel 227-247, 363Conference Tables (see Tables – Bases and Legs)Corner Cabinets 219, 271Credenzas – Veneer and Laminate 196-197, 200, 206-208 Tops 66-67Designer Finishes 40-51, 66-67Desks Laminate Casegoods 252-258 Steel 240-242Disc Table Bases 86-87Drum Bases 108-109Education and Training Furniture Classroom Tables 128-129, 160-161 Laptop Storage Tables 161 Lecterns 198, 202, 207 Training Tables 32-39, 112-113, 116-118, 136-143, 146-147, 150-151Ganging Brackets 223Height-Adjustable Tables (see Tables – Adjustable-height Legs)Lecterns 198, 202, 215Legs (see Tables – Bases and Legs)Markerboards 224Modesty Panels 221-222, 354-356Monitor Lift Tables 128, 170

co

nte

nts

by

pr

od

uc

t t

yp

efo

rc

onte

nts

bypr

oductname,see

page3

7

co

nte

nts

by

pr

od

uc

t t

yp

efo

rc

onte

nts

bypr

oductname,see

page3 Monitor Walls 84

Open Plan Environments Storage 358-363 Workstations and Components 274-283, 284-295, 298-356Pedestals 229, 237, 251, 265, 296, 363Power and Data Cable Management Accessories 194, 358 Conference Applications 185 Data Jacks/Couplers and Telecom Plates 192-193 How to Choose for Tables 182-183 Media Sharing Applications 80-83, 383 Open Plan Workstations 276, 286-287, 303-304 Training Applications 184Presentation Cabinets 219Privacy Screens 220-221, 352-355PrivateOffices Laminate Desks and Casegoods 249-271 Steel Desks and Storage 227-247 Reception Desks 260Screens 220-221, 352-355Square Table Bases/Legs 86, 121, 132, 136Storage – Laminate 250-259Storage – Steel 230-239, 360-363Storage – Landscape 360-362 Storage – Mobile 237, 265, 296, 363Support Furniture Credenzas 196-197, 200, 206-208 Lecterns and Command Centers 198, 207 Occasional Tables 218Tables – Accessories Brackets, Casters, Plates, Braces, Grommets, Ganging 223 Privacy/Modesty 220-222Tables – Adjustable-height Conference Bases, Assemblies, & Legs Conference 136 Electric 133, 156-158 Extended Corners (L) 156-158 Pin, Knob, and Set Screw 117, 120, 138, 141-142, 150, 161 120 Planning 156-158 Tables – Bases and Legs Adjustable-height Legs and Bases (see Tables – Adjustable Height Legs) C-Legs 116-118, 141, 150-151 156-158, 170

8

co

nte

nts

by

pr

od

uc

t t

yp

efo

rc

onte

nts

bypr

oductname,see

page3 Conference Bases – Laminate and Veneer 74-79, 92-95, 108-109, 114

132-133, 148, 162-166 Conference Bases – Metal 74-79, 88, 90-91, 114, 121, 132-133 136, 138, 144, 148, 164-166, 170 Conference Bases with Trough Kits 74-79, 92-95, 164-166 Drum Bases 108-109 Disc and Café (Bar Height) Bases 86-87, 120, 122-123, 136, 140, 152-153 Flip Legs 113, 123, 139-141, 143, 147, 171 Folding Legs 112, 138, 146, 170-171 H-Legs 170 O-Legs 121, 336 Sawhorse 136 Square and Café Bases 86 Straight 120-121, 140, 171 T-Legs 112-113, 138-139, 146-147, 170 TT-Legs 114, 138, 148 X-Bases 122-123, 140, 152-153, 171 Y-Legs 142-144Tables – Complete Classroom 128-129, 160-161 Conference 88 Laptop Storage 161 Occasional 218, 391 Team Tables 130-131, 168-169 Video Sharing Tables 80-81Tables – Occasional 200Tables – Power Data Units Conference Applications 185 How to Specify 182-185 Training Applications 184Tables – Replacement Parts 223Tables – Tops Conference Tops 40-71 Designer Finishes – Glass, KrystalCast® Acrylic, Solid Surface, Quartz, Birch Ply Edge 31, 40-51, 66 Training and Small Table Tops 38-45Team Tables 130-131, 168-169 Towers Laminate 268-269 Steel 236, 360Training Tables 32-39, 112-113, 116-118, 136-143, 146-147, 150-151Video Sharing (VS) 80-83Whiteboards 224Worksurfaces Tables 32-71 Workstations 342-350

9

www.enwork.com 800.815.7251

GSA Contract Holder

Schedule 71 Furniture

Contract NumberGS-28F-0028U

Contract PeriodJune 4, 2008 – June 3, 2023

ContractorEnwork12900 Christopher Dr.Lowell, MI 49331-9420

NOTE: Contract is awarded under S-Corporation Name ASSA Group, Inc.

Government Customer Service InformationPhone: 800.815.7251Fax: 888.433.2128Email: [email protected] Placement: [email protected]: www.enwork.com

Additional Contact Information provided at: http://enwork.com/contact-us/

Authorized Federal Supply Schedule Price ListGSA PDF Pricer/s accessible at: http://enwork.com/government/

General InformationBusiness Size: SmallEIN: 20-4467006CAGE: 42NC2NAICSNO: 37211-WoodOfficeFurnitureManufacturing 37214-OfficeFurniture(ExceptWood)Manufacturing

Online access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!, a menu-driven database system. The internet address for GSA Advantage! is www.GSAAdvantage.gov.

For more information on ordering from Federal Supply Schedules, click on the FSS schedule button at www.fss.gsa.gov .

10

GS-28F-0028U Information for Ordering Activities

1a. Special Item Numbers (SIN)

Special Item Number (SIN) Description 711-1 Furniture Systems and Workstation Clusters 711-2 Worksurfaces, Workstations, Computer Furniture and Accessories 711-3 Filing and Storage Cabinets, Shelves, Mobile Carts, Dollies, Racks, & Accessories 711-8 ExecutiveOfficeFurniture 711-9 Executive Conference Room Furniture, Coordinated Tables, Case Pieces and Accessories 711-11 Tables and Accessories

1b. Lowest Priced Model Numbers Calculated by taking unit list price multiplied by minimum order discount for a Shipping Zone. SIN Model Number Zone 1/2/3 Zone 4 711-1 UMTB $5.35 $5.72 711-2 PDGR $6.24 $6.68 711-3 A2PBXD $5.35 $5.72 711-8 DTKB36 $63.56 $68.05 711-9 XUMTD-002 $7.13 $7.63 711-11 GREDG1 $1.78 $1.91

1c. Hourly RatesNot Applicable.

2. Maximum Order$500,000 Net.

Agencies may issue and Enwork may accept larger orders. Enwork must return any such order that it does not intend to acceptwithinfivebusinessdays.

3. Minimum Order$100 Net.

4. Geographic CoverageThe 48 contiguous states plus the District of Columbia (CONUS). Orders for destinations in Alaska, Hawaii, Puerto Rico, Guam, etc. may specify delivery FOB POE (Point of Embarkation). Agencies may contact Enwork or a Participating Dealer for assistance with consolidation, forwarding and/or containerization information. For international destinations, agencies are to provide forwarding instructions or TCN documentation and/or instructions.

5. Point(s) of ProductionPrimary points of production take place in West Michigan.

6. Discount StatementDiscount is applied to list prices. Discounts apply per shipment, which is a group of products ordered for delivery at one time to one destination. Single discounts offered for an awarded project involving phased order placement and shipments must be authorized in advance by an Enwork Representative. See Item Number 7 for volume discount information or reference http://enwork.com/government/.

11


7. Quantity DiscountsThe delivery address determines the appropriate geographical zone. Orders for destinations in Alaska, Hawaii, Puerto Rico, Guam, etc. shall reference POE location for applicable discount. Open market items are to be excluded when calculating discount. Open market items may be procured in accordance with the circumstances set forth in FAR 8.402(f) and Enwork will offer same discount concessions.

IfaprojectexceedstheSimplifiedAcquisitionThresholdandapricereductioninaccordancewithFAR8.405-4isrequestedbya government agency, Enwork is open to offering additional pricing incentives based upon product selection and order size.

8. Prompt Payment Terms2%/10 net 30 days from date of invoice. Credit card orders are exempt from prompt payment terms.

9a. Acceptance of Government Purchase CardsGovernment credit cards are accepted above and below the micro-purchase threshold. Enwork currently accepts American Express,MasterCard,andVisa.Writtenissuanceofcreditcardinformationispreferred.Enworkhasacreditcardformonfileto accommodate. Credit card information may be verbally given, yet written acceptance of credit card authorization is needed prior to processing.

9b. Discount for Credit Card UseNone.

10. Foreign ItemsNone.

Quantity Discounts Zone 1 Zone 2 Zone 3 Zone 4 States

0-30,000 List 70.30% 70.30% 70.30% 68.20% Zone 1 MI, WI, IL, IN, OH

Zone 2 MN, IA, NE, SD, ND, KS, MO, PA, KY

Zone 3NY, NJ, DE, MD, VA, WV, TN, NC, SC, GA, AL, MS, AR, LA, OK, TX, CO, UT, WY, MT, ID, MA, ME, NH,VT, CT, RI

Zone 4CA, WA, OR, NM, NV, AZ, FL

30,001 List - 60,000 List 71.40% 71.40% 70.30% 70.30%

60,001 List - 120,000 List 73.50% 72.40% 72.40% 71.40%

120,001 List - 250,000 List 74.60% 73.50% 73.50% 72.40%

250,001 List - 500,000 List 75.60% 73.50% 73.50% 73.50%

500,001 List and Above 75.60% 73.50% 74.60% 73.50%

Mockups: Preapproval Required 80.00% 80.00% 80.00% 80.00%

12

11a. Time of Delivery60 days or sooner after receipt of clean order. Lead times vary by product line. Reference http://enwork.com/dealers/ for current lead time information. If an agency requires delayed delivery, it shall specify “do not deliver before (date)” on the order.

11b. Expedited DeliveryTheEnworkSimonprovidednexttopartnumberssignifieseligibilityintheEnworkQuickShipProgram.QuickShipProgramitems typically ship within 7 business days of a clean order being received. Program rules are subject to change at the discretionofEnwork.ContactEnworkpriortoorderplacementtoconfirmcurrentprogramrulesandeligibility.

11c. Overnight and 2-Day DeliveryAvailable upon request and may carry additional upcharges. Contact Enwork.

11d. Urgent RequirementsAccelerated lead times available upon request and may carry additional upcharges. Contact Enwork.

12. F.O.B. Point(s)Product is FOB Destination Enwork freight prepaid within CONUS + POE. Orders less than $1000 net are assessed a $100 net freight fee. Exception – orders less than $100 net that can be sent FedEx (e.g. small legs, brackets and lighting) have no freight fee.

13a. Ordering AddressPurchase orders or credit card orders may be issued to: Enwork 12900 Christopher Dr. Lowell, MI 49331-9420

Agencies may use the following address format to designate a Participating Dealer: Enwork c/o (name of Participating Dealer) 12900 Christopher Dr. Lowell, MI 49331-9420

Orders may be submitted into Enwork via hard copy mailing, fax (888-433-2128) or email ([email protected]). Email is preferred method of delivery as it ensures faster processing times.

13b. Ordering ProceduresFor supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) and a sample BPA can be found at the GSA/FSS Schedule homepage (www.fss.gsa.gov/schedules).

14. Payment Address Enwork 12900 Christopher Dr. Lowell, MI 49331-9420

Acceptable forms of payment include check, credit card, or EFT. Credit card form accessible at http://enwork.com/government. EFT information is accessible in SAM (System for Award Management) database or can be obtained by emailing [email protected] .

15. Warranty ProvisionEnwork commercial warranty applies.

16. Export PackagingNone. Enwork will drop ship to any US port of embarkation (excluding Alaska & Hawaii) and will not be responsible for any additional packaging required after that point. Products that come standard assembled can be KD upon request. Enwork will provide estimated weight & cube, but the Participating Dealer or Freight Forwarder is responsible for all customs/shipping paperwork as well as marine insurance. Product title transfers at POE.


13

17. Terms and Conditions of Government Purchase Card AcceptanceCredit cards are processed and charged at time of shipment. Prompt payment discount terms do not apply to credit cards.

18. Terms and Conditions of Rental, Maintenance, and RepairNot applicable.

19. Terms and Conditions of InstallationInstallation services may be negotiated between a Participating Dealer and Ordering Agency on a project by project basis.

20. Terms and Conditions of Repair Parts Not applicable.

21. Service and Distribution PointsEnwork headquarters and distribution center is in Lowell, Michigan. Contact Enwork for details regarding Participating Dealers in your area.

22. Participating DealersDealers may not accept product orders or perform invoicing under this contract. However, Dealers may provide ancillary services such as design, installation, and project management services, including warranty resolution, as Enwork’s subcontractor. Contact Enwork for details regarding Participating Dealers in your area.

23. Preventive MaintenanceNot applicable.

24a. Environmental AttributesEnwork as a company is committed to environmental stewardship and minimizing our carbon footprint. This pertains not only to our processes and materials but also to our supply chain and waste stream management. Reference Environmental Brochure (http://enwork.com/environmental/) or Commercial Price List (http://enwork.com/product-pricing/) for informationregardingsustainablepractices,products,andanycertifications.

24b. EIT StandardsNot applicable.

25. Data Universal Number System (DUNS)Duns No. 16-658-0121

26. SAM (System for Award Management) RegistrationActively registered.

27. CancellationChange or cancellation requests must be made in written form. Orders may not be changed or cancelled without the written consent of Enwork. Per the following guidelines, Enwork may accept changes if an order is in progress and/or material have been ordered.

• Order is within 7 business days of shipping; Enwork cannot change or cancel without 100% fee.• Order is scheduled to ship more than 7 business days from receipt of written request: Ordering agency will be responsible for any manufacturing costs incurred as well as a $250 (net) change/ restock fee.

28. Restocking ChargesReference Item Number 27.


14

Clean þrder ChecklistThis document is meant to serve as a guideline to help ensure government orders submitted into Enwork contain completeandaccurateinformation.Complete,accurateorderscanhelpminimizeclarificationquestions,contributeto better turnaround times on acknowledgments and adherence to publicized lead times for products purchased, andimproveoverallefficiency.

¨ ORDER ISSUANCE• Purchase orders or credit card

orders must be made out to:

Enwork12900 Christopher Dr.Lowell, MI 49331-9420

• Agencies may use the followingaddress format to designate aParticipating Dealer:

Enworkc/o (name of Participating Dealer)12900 Christopher Dr.Lowell, MI 49331-9420

¨ CONTRACT NUMBER• Must identify products and

pricing apply to GSA ScheduleContract GS-28F-0028U.

¨ P.O. DATE• Award/Effective, System Approval,

or Issuance Date must be on orbefore the expiration of the contract.

¨ P.O. NUMBER• Easily recognizable and eligible.

¨ PRODUCT SPECIFIED• Shall be submitted in at unit net

prices, extended net amounts.• Net prices shall be derived from

product list prices and discounts ineffect at time of order placement.

• Make reference of and includeEnwork and/or Dealer Quote ifapplicable.

• LOT numbers should include partnumber, description, quantity, andpricing breakdowns.

• Core part number and product optionsuffixesprovidedshouldsyncwithcorresponding product descriptionand vice-versa.

• Fabric, Finishes, Pull Styles must belisted for product where applicable.

• Open market items should be clearlyidentifiedandpurchasedinaccordance with circumstances setforth in FAR 8.402(f).

¨ ANCILLARY SERVICES• Ancillary services such as project

management, design, and installationaren’t part of the scope of thiscontract, but are negotiable and billedby Enwork to agency on behalf of aParticipating Dealer.

• Amounts should be separated fromproduct as its own line item.

¨ SHIPPING ADDRESSProvide delivery address and any otherinstructions as it could relate to:• Tagging (All products should be

labeled for…, mark cartons andinvoices for…, etc.)

• CBD Information• Site Access Information (Enter North

Gate…, Driver must be US Citizen…, etc.)• Delivery Timeframes• Special Packaging (i.e. for overseas)

¨ SIGNATURES• An authorized agency signature is

required on all purchase orders.

¨ CONTACT INFORMATION• Point of contact/s (Name, Title, Phone

Number, Email Address) for whereorder questions should be directed to.

¨ P.O. MODIFICATIONS• A change order via a FormalModification(SF30Form)orotherwritten documentation that is withinthe scope of agency procurementguidelines must be presented toEnwork for approval.

• If order is within 7 business days ofshipping Enwork cannot change orcancel without 100% fee.

¨ DEALER RELATEDAs it pertains to purchases made through:

1. A Dealer’s Schedule.2. A Manufacturer’s Scheduleutilizing a Dealer to procure teamingmember products on their behalf.ItemsbelowmustbeonfilewithEnwork or presented upon orderplacement.

• CTA, LOA, or LOS.• Copy of agency order with our

product.

¨ PAYMENT TERMS• Terms are negotiated at 2%,

10 Net 30 for this contract.• Acceptable forms of payment

include check, credit card, or EFT.• Credit card orders are exempt

from prompt payment terms andprocessed when an order ships.

¨ BILLING• Provide billing address and specify

how invoices should be sent (hardcopy mailing, email, fax, onlineinvoice submissions like iRAPT,IPP). Notate any other special billinginstructions.

¨ REMITTANCE ADDRESSEnwork12900 Christopher Dr.Lowell, MI 49331-9420

SCHEDULE INFORMATION

Contract NumberGS-28F-0028U

Contract PeriodJune 4, 2008 – June 3, 2023

ContractorEnwork12900 Christopher Dr.Lowell, MI 49331-9420

NOTE: Contract is awarded under S-Corporation Name ASSA Group, Inc.

Government Customer Service InformationPhone: 800-815-7251Fax: 888-433-2128Email: [email protected] Placement: [email protected] Website: www.enwork.com

Authorized FSS Price ListGSA PDF Pricer/s accessible at: http://enwork.com/government/

General InformationBusiness Size: SmallEIN: 20-4467006CAGE: 42NC2NAICS NO: 37211 (Primary), 37214

15

Credit Card Authorization FormThis form is to be used exclusively for payment and/or procurement of goods and services from Enwork GSA Schedule GS-28F-0028U. The following terms and conditions apply:

• Credit card orders are exempt from prompt payment terms.• Credit card orders bill when shipped. See GSAR 552.232-80.• Processingwillnottakeplaceunlesssignatureispresentorwrittenconfirmationispresentedin theformofanemailfromcardholderconfirming“IgiveEnworkpermissiontoprocesscard number ending in -_ _ _ _ (5 digits if AMEX) for $_____ amount.”• Itemsmarkedwith*mustbecompletedinfull.Section1mustbefilledoutinitsentiretyifthis is a credit card order in lieu of a purchase order. Section 2 for payment purposes. • Form may be faxed (888-433-2128) or emailed ([email protected]). Receipt of information confirmedwithin24hourstocardholder.• Questions relating to this form can be directed to 800-815-7251, [email protected].

Section 1* Agency or Customer Name: Servicing Dealer:

* Purchase Order Number: Contact: Bill to Address: Phone:

Ship to Address: Email:

Shipping Instructions (CBD, etc.):

Product Ordered is included on: ¨ Enwork Quote # ¨ Pages to Follow

Section 2 * Cardholder Name: Bill Immediately? ¨ Yes ¨ No

* Cardholder Address:

* Please select payment type: ¨ ¨ ¨ * Credit Card Number:

* Expiration Date:

* CVV Code (What’s this?):

* Purchase Amount:

* Signature:

Special Processing Instructions:

* Contact Information: Phone: Email:

Schedule information available at www.enwork.com/government *Requiredfields

Print Form Reset Form

16

COM Yardage Requirements

Procedure1) Identify product type and size a. For Pixley COM information, see Step 1 on page 396 b.ForSeatingCOMinformation,refertotheOrderingInformationforeachspecificmodel2) Determine fabric roll width (Enwork uses the RAILROAD method exclusively)3) Find corresponding fabric usage value from table below4) Calculate fabric required using the formula below

a. (#UNITS x FABRIC USAGE) + 2.0b.Add10%toaccommodatefabricflaws,wrinklesandotherimperfectionsc. Please order COM IN SEPARATE ROLLS for each product type (e.g. one roll for Grid Tiles, another roll for Ped Cushions) to accommodate multiple manufacturing centers. Tag each roll with the order number and send to ENWORK, 12900 Christopher Dr., Lowell MI 49331

FABRIC USAGE CHART (54w/66w Rolls)For 54”w Rolls 24”w 30”w 36”w 42”w 48”w 54”w 60”w 66”w 72”w 84”w

Grid Tiles - Rail & Thin ProfilesUSUF/USUG/USUFT/USUGT n/a .24 n/a n/a .36 n/a .44 n/a .53 .61USFF/USFG/ USFFT/USFGT n/a .31 n/a n/a .48 n/a .59 n/a .70 .81USUFB/USUGB n/a .31 n/a n/a .48 n/a .59 n/a .70 .81USFFB/USFGB n/a .47 n/a n/a .72 n/a .89 n/a 1.06 1.22Privacy Screens, Topper Screens, Tackboards, Monitor Stands AAG/AAUH/UMTP/EBTN/AMTTP .52 .63 .74 .85 .94 1.07 1.19 1.30 1.41 1.62AAF/UNSC .78 .94 1.11 1.27 1.44 1.61 1.77 1.94 2.11 n/aVTK/DTK/WTKB n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aA2CT n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aCLAMP-ON SCREEN .52 .63 .74 .85 .94 1.07 1.19 1.30 1.41 n/aUG TACKBOARD n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aUGTF n/a n/a n/a n/a 1.44 n/a 1.78 n/a 2.11 n/aCYMNT n/a n/a 2.13 n/a 2.79 n/a 3.46 n/a n/a n/aPCL/PCV n/a n/a n/a n/a .56 n/a n/a n/a n/a n/aUNSC n/a n/a n/a n/a 1.5 1.75 2 2 2.25 n/aCushions Apex Ped, Universal Mobile Ped, & LandscapeA2CUSHCOM18 .36 n/a n/a n/a n/a n/a n/a n/a n/a n/aA2CUSHCOM24/EBCUSHCOM .43 n/a n/a n/a n/a n/a n/a n/a n/a n/aU9CUSH .44 .53 .61 .69 .78 .86 .94 1.03 1.11 n/a For 66”w Rolls 24”w 30”w 36”w 42”w 48”w 54”w 60”w 66”w 72”w 84”w

Grid Tiles - Rail & Thin Profiles USUF/USUG/USUFT/USUGT n/a .19 n/a n/a .29 n/a .36 n/a .42 .49USFF/USFG/ USFFT/USFGT n/a .24 n/a n/a .36 n/a .44 n/a .53 .61USUFB/USUGB n/a .24 n/a n/a .36 n/a .44 n/a .53 .61USFFB/USFGB n/a .31 n/a n/a .48 n/a .59 n/a .70 .81Privacy Screens, Topper Screens, Tackboards , & Monitor Stands AAG/AAUH/UMTP/EBTN/AMTTP .39 .47 .56 .64 .72 .81 .89 .97 1.06 1.22AAF/UNSC .52 .63 .74 .85 .94 1.07 1.19 1.30 1.41 n/aVTK/DTK/WTKB n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aA2CT n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aCLAMP-ON SCREEN .39 .47 .56 .64 .72 .81 .89 .97 1.06 n/aUG TACKBOARD n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/aUGTF n/a n/a n/a n/a 1.44 n/a 1.78 n/a 2.11 n/aCYMNT n/a n/a 2.13 n/a 2.79 n/a 3.46 n/a n/a n/aPCL/PCV n/a n/a n/a n/a .56 n/a n/a n/a n/a n/aUNSC n/a n/a n/a n/a 1.5 1.75 2 2 2.25 n/aCushions - Apex Ped, Universal Mobile Ped, & Landscape A2CUSHCOM18 .36 n/a n/a n/a n/a n/a n/a n/a n/a n/aA2CUSHCOM24/EBCUSHCOM .43 n/a n/a n/a n/a n/a n/a n/a n/a n/aU9CUSH .44 .53 .61 .69 .78 .86 .94 1.03 1.11 n/a

17

Lock CoresLock cores are LL Series. UM Series and alternate lock cores on select products are available upon request.

Keyed RandomRandomlocksautomaticallyshipwiththeproductunlessotherwisespecified.Random means no effort has been made to match key numbers, or to make them different.

Keyed AlikeFor the convenience of the user, furniture may be keyed alike at no charge. Using the keyed alike instructions, order lock cylinders and keys as line items on your purchase order. The Enwork Grand Rapids Lock Center will select key numbers. Key numbers will not be repeated unless the standard range has been exceeded. Lock cylinders will shipseparatelyfromtheproduct,readyforfieldinstallation.

Installing Lock CylindersInstallation of lock cylinders will be on-site. Enwork will not be responsible for lock cylinder installation. Lock cylinders are installed or removed using a change key. A change key is provided at no charge with each key-alike request. To order additional change keys, specify part number NWCHANGE ($20 list) on your purchase order. Cylinders must be in the unlocked position to be removed.

Lock DistributionAll lock orders are packaged and shipped from the Grand Rapids Lock Center, regardless of where the products are manufactured. Lock cylinders and keys will ship via FedEx. Please provide a contact name on your purchase order to receive the keys.

Lock Part NumbersPart # Description List PriceNWSPEC2 Set of 2 locks N/CNWSPEC3 Set of 3 locks N/CNWSPEC4 Set of 4 locks N/CNWSPEC5 Set of 5 locks N/CNWCHANGE Change Key $20NWMASTER Master Key $20

How to Specify Keyed AlikeFollowing is an example of how to specify keyed alike locks for a 6-pack of workstations.

Step 1 –Usingthefloorplan(left),countthenumberoflocksineachworkstation.

Step 2 – Count the number of workstations with the same quantity of locks. Group together the workstations with a like number of locks.3 workstations with 4 locks per station1 workstation with 3 locks per station2 workstations with 2 locks per station

Step 3 –Forthefirstgroup(3setsof4locks),enterthenumberofworkstationsinthequantity column.QTY Part # Description List Price Ext. List3

Step 4 –ThenenterthepartnumberNWSPEC__andaddasuffixforthenumberoflocksforthatgroup(i.e.for4locksperstation,addthesuffix“4”).

Step 5 – Repeat for other groups.QTY Part # Description List Price Ext. List3 NWSPEC4 Set of 4 locks N/C N/C1 NWSPEC3 Set of 3 locks N/C N/C2 NWSPEC2 Set of 2 locks N/C N/CEnwork will select key numbers for each set from the available numbers.

3 locks 2 locks

4 locks 2 locks

Lock Program

Lock program does not apply to eBench mobile peds.

19

TablesTopsBases and LegsPower DataSupport FurnitureAccessories

20

Enwork Product Information

Product InformationWorksurfaces (Tops)Worksurfaces are made of 1.125” thick, M3 rated (45 lb.), furniture-grade particle board, laminate and backer. Wood coreshaveIS0140001certificationandaremadefrom98-100%post-industrialrecycledcontents.WoodcoreshavebeengrantedEnvironmentallyPreferableProductCertificationbytheCPArelatingtotheirformeldahydeemissions,which are less than 0.09 PPM (CARB phase 2) meeting the current California Air Resources (CARB) requirement.

Grain Direction on all wood grain laminates runs as shown below. Alternative grain directions are available for a charge.

Great care is taken on 2-piece tops to match laminate wood grains as close as possible given the limiations of pattern, shape, laminate repeatability, and manufacturing tolerances. 3+ piece tops are not grain matched as most laminate sheets only allow for 2 pieces to match.

*Exception: 3-piece veneer tops are cross grain, 66”D and 72”D laminate tops are also cross grain.

Worksurface SizingWorksurfacescanbesizedtofitintoEnworkbenchingsystemsorintoanothermanufacturer’s panel system (ex.: Steelcase Kick®,HermanMillerActionOffice®) as a blending solution. If you do not see a particular system in our price list, specify “M” for “Other” along with the manufacturer and system name so Enwork can work withyoutofulfillyourorder.

Standard Laminate worksurfaces are made of High Pressure Laminate (HPL) and pass all applicable industry specifications.Edgechoicesinclude3mm,KnifeorPVCPly.Gridworksurfaceswillhavetheselectededgeprofileonthefrontedgeanda1mmedgeonthesidesandbacktoaccommodatetightworksurface-to-worksurfacefit.Tableworksurfaces have the 3mm or 3mm Ply PVC Edge all the way around the worksurface.

Contour Laminate worksurfaces offer a seamless look (no visible edgebands or t-molds) and the attractive ergonomic Taper edge. They are made of rigid thermofoil plastic (RTF) which provides quality levels that are comparable to HPL, but are slightly more susceptible to nail polish remover and heat. Maximum depth of contour laminate is 48.”

Veneer Worksurfaces are available in Maple, Cherry, Walnut, and Rift Cut Oak. Maple, Cherry, and Walnut have an openporefinish,arenaturalslip-matchedandfull-cut(notquartered).Veneerlayupon2-piececonferencetabletopsis long grain. Veneer layup on 3-piece conference tables is cross grain.

Veneer Stains aredefinedbyspecies:> Maple veneer (D) is stained to match Kensington Maple laminate.> Cherry veneer (9) is stained to match Select Cherry laminate.> Walnut veneer is clear coated (7) or stained to match either (T) Ebony Recon, or (2) Pinnacle Walnut laminate.> Rift Cut Oak is clear coated (6).> Alternative stains are available upon request. The fee to match a stain is $700 list. Additionally, there is a 10% upcharge to each item’s list price. The matching and approval process must take place prior to order entry. For stain matching approval process email [email protected] or call customer service at 800.815.7251 for information.

Laminate Tables with wood edge have the following solid wood edge thicknesses (top view):1. 3mm edge is 0.12” wide.2. Taper edge is 1.75” wide.3. Knife edge is 1.9” wide.4. Bullnose edge is 1.25” wide. Veneer Tables with wood edge have the following solid wood edge thicknesses (top view). 1. 3mm edge is 0.12” wide. 2. Knife edge is 0.12” wide (3mm). Undercut is MDF stained to match. 3. Bullnose edge is 1.25” wide. 4. Taper edge is 1.75” wide. 5. Ultra edge is 1.75” wide.

Straights* Curved Corner Extended Curved Corner

‹ —›‹ —› ‹ —› ‹ —›

120 Degree Corner

21

Enwork Product Information

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

SCable Management Solutions are offered in a variety of styles. The following options are available:

Edge and Grommet Finish DefaultsEnworkoffersthefollowingHPLlaminatefinisheswithdefaultedgecolors:Laminate Finish 3mm/Knife Grommet Knife Edge (MDF)Name Letter Edge Color Color Undercut ColorWilsonart Kensington Maple (10776-60) A Kensington Maple Grey Clear

Wilsonart Pinnacle Walnut (7992-38) D Pinnacle Walnut Black Clear

Wilsonart Fashion Grey (D381-60) E Fashion Grey Grey Clear

Wilsonart Field Elm (7999K-12) H Field Elm Light Taupe Clear

Wilsonart Grey Elm (8201K-12) J Grey Elm Light Taupe Clear

Wilsonart Ebony Recon (7997-38) K Ebony Recon Black Clear

Wilsonart Frosty White (1573-60) M Frosty White White Clear

Wilsonart Crisp Linen (4942-38) O Fashion Grey Light Taupe Clear

Wilsonart Slate Grey (D91-60) P Slate Grey Grey Clear

Wilsonart Portico Teak (8210K-28) Q Portico Teak Grey Clear

Wilsonart Black (1595-60) R Black Black Clear

Wilsonart River Cherry (7937-38) V River Cherry Grey Clear

Wilsonart Designer White (D354-60) W Designer White White Clear

Formica Neutral Twill (8826-58) 3 Neutral Twill Grey Clear

Formica Bleached Legno (8845-58) 4 Bleached Legno Grey Clear

Formica Select Cherry (7759-43) 7 Select Cherry Black Clear

Tip: Contour Laminate default grommet colors are as follows: Natural Maple (Grey), Designer White (Grey), Hayward Cherry (Black), Studio White (Grey), River Cherry (Grey).

Tip: Veneer default grommet color is black. Laminate with veneer edge grommet color defaults to the laminate.

Tip: Additional 3mm edge colors can be used. For availability and pricing, email [email protected].

Tip: When specifying a special laminate, please freeform a standard edge color on order. If a non-standard edge is needed, contact [email protected] for availability and pricing.

Paint FinishesEnwork offers the following paint colors:

Paint/Name Finish Letter Storm G Black R Silver S Medium Tone T Arctic White (textured) W *Metallic Bronze M *Only offered as standard on select products.

Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for a $350 List fee per order. Call/emailforavailabilityofspecificcolors.Additionalcustompaints(e.g.TigerDryLac)mustbequotedthrough [email protected].

No Cable Management

Grommet(4” to center from edge)

Powerlex Grommets (6” from rear and 9" from

side edge to center)

Full Scallop (1-1/4” from rear, starts

6.3” from corner)

Scallops(8”W x 1.6”D, starts 6” from

corner)

9"6"

3" Full Scallop (3” from rear, starts

6” from corner)

22

Tops

Legs

and

Bas

es, c

rede

nzas

an

d su

ppor

t fur

nitu

re

Affini

ty

Ape

x

Grid

S = StandardU = UpchargeFabrics Ped Cushions - Camira Era, Chicago, Gravity, Haven, and Manhattan S STackboards/Grid - Camira Era, L2, Chicago, Lucia, and Manhattan S SFor Pixley fabric information, see page 396For Seating fabric & mesh information, see pages 384-401 Top Laminates Wilsonart Kensington Maple (10776-60, Matte Finish) S S S SWilsonart Pinnacle Walnut (7992-38, Matte Finish) S S S SWilsonart Fashion Grey (D381-60, Matte Finish) S S S SWilsonart Field Elm (7999K-12, Matte Finish) S S S SWilsonart Grey Elm (8201K-12) S S S SWilsonart Ebony Recon (7997-38, Matte Finish) S S S SWilsonart Frosty White (1573-60, Matte Finish) S S S SWilsonart Crisp Linen (4942-38, Matte Finish) S Wilsonart Slate Grey (D91-60, Matte Finish) S S S SWilsonart Portico Teak (8210K-28) S S S SWilsonart Black (1595-60, Matte Finish) S S S SWilsonart River Cherry (7937-38, Matte Finish) S S S SWilsonart Designer White (D354-60, Matte Finish) S S S SFormica Neutral Twill (8826-58, Matte Finish) S S S SFormica Bleached Legno (8845-58, Matte Finish) S S S SFormica Select Cherry (7759-43, Artisan Collection) S S S S Top Laminates, Contour Natural Maple S SHayward Cherry S SStudio White Matrix S SDesigner White S SRiver Cherry S S Top and Casegoods Veneers Maple (stained similar to Kensington Maple laminate) S S Cherry (stained similar to Select Cherry laminate) S S Walnut (clear coated, stained similar to Ebony Recon laminate, S S or stained similar to Pinnacle Walnut laminate)Rift Cut Oak (clear coated) S S Laminate Casegoods Wilsonart Kensington Maple (10776-60, Matte Finish) S S SWilsonart Pinnacle Walnut (7992-38, Matte Finish) S S SWilsonart Fashion Grey (D381-60, Matte Finish) S S SWilsonart Field Elm (7999K-12, Matte Finish) S S SWilsonart Grey Elm (8201K-12) S S SWilsonart Ebony Recon (7997-38, Matte Finish) S S SWilsonart Frosty White (1573-60, Matte Finish) S S SWilsonart Crisp Linen (4942-38, Matte Finish) Wilsonart Slate Grey (D91-60, Matte Finish) S S SWilsonart Portico Teak (8210K-28) S S SWilsonart Black (1595-60, Matte Finish) S S SWilsonart River Cherry (7937-38, Matte Finish) S S SWilsonart Designer White (D354-60, Matte Finish) S S SFormica Neutral Twill (8826-58, Matte Finish) S S SFormica Bleached Legno (8845-58, Matte Finish) S S SFormica Select Cherry (7759-43, Artisan Collection) S S S Paints Black S S S S Storm S S S SSilver S S S S Medium Tone S S S SArctic White (textured) S S S S Bronze (Ritz only)

Tables

Enwork Finishes

23

Worksurface (Top) Support and Bracing Rules

> Conference and training table tops 60”wide and wider come with support braces (NWBRACE) at no charge, if required. See page 24 for a list of how many braces are included per top.

> Grid worksurfaces do not include braces due to unknown applications (peds, lats, etc.). Standard laminate worksurface(NWBRACE)supportisrequiredonunsupportedspans54”Wandwider.Supportscanbefixedpeds, legs, or braces.

> The maximum allowable span between legs or supports is 72” - even with braces.> As an alternate to braces, legs may be inset from table ends. > All 30"D tops 72"W or wider, as well as tops 36"D or deeper and 60"W or wider, require two braces instead of one.

Braces are included automatically on all conference and table tops, if required.> Foundation Panel Base Trough Kits, Stealth, Lugano, and Concurrence conference tables are designed with

support and don't utilize stand-alone (NWBRACE) braces.

> For additional information about bracing installation for Training and Conference tops, please visit www.enwork.com/planning-installation-care.

Enwork Supports and Bracing

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

24

Number of Number of Number of Number of Number ofDepth Width Straight Legs T/C/H Legs X/Disc Bases Conf. Bases Braces18/24/30 30 4 2 1 n/a 018/24/30 36 4 2 1 n/a 018/24/30 42 4 2 1 n/a 018/24/30 48 4 2 2 n/a 018/24/30 54 4 2 2 n/a 018/24/30 60 4 2 2 n/a 118/24/30 66 4 2 2 n/a 118/24/30 72 4 2 2 n/a 1

18/24/30 78 4* or 6 2* or 3 2* n/a 1

18/24/30 84 4* or 6 2* or 3 2* n/a 118/24/30 90 4* or 6 2* or 3 2* n/a 118/24/30 96 4* or 6 2* or 3 2* n/a 1

36/42 36 4 2 1 n/a 036/42 42 4 2 1 n/a 036/42 48 4 2 1 n/a 036/42 54 4 2 2 n/a 036/42 60 4 2 2 n/a 236/42 66 4 2 2 n/a 236/42 72 4 2 2 n/a 236/42 78 4* or 6 2* or 3 2* 2* 236/42 84 4* or 6 2* or 3 2* 2* 236/42 90 4* or 6 2* or 3 2* 2* 236/42 96 4* or 6 2* or 3 2* 2* 2

48 48 4 2 1 2 048 54 4 2 2 2 048 60 4 2 2 2 248 66 4 2 2 2 248 72 4 2 2 2 248 78 4* or 6 2* or 3 2* 2* 248 84 4* or 6 2* or 3 2* 2* 248 90 4* or 6 2* or 3 2* 2* 2

48/60 96 4* or 6 2* or 3 2** 2** 248/60 108 6** 3** 3** 3** 048/60 120 6** 3** 3** 3** 048/60 132 6** 3** 3** 3** 048/60 144 6** 3** 3** 3** 048/60 156 6** 3** 3** 3** 048/60 168 6** 3** 3** 3** 4

48/60 180 6** 3** 3** 3** 448/60 192 6** 3** 3** 3** 448/60 204 8** 4** 4** 4** 048/60 216 8** 4** 4** 4** 048/60 228 8** 4** 4** 4** 648/60 240 8** 4** 4** 4** 6

Any Top Any Base

66”, 72” and 84” Round tops require 2 braces in some applications.

*Worksurfaces longer than 72” must have a third leg in the middle or legs must be inset to a maximum span of 72”.

**See page 23 and 25 for more information.

Any Top - Any Base

25

96” Table72”-96” Table

168”-192’’ Table

204’’-216’’ Table

204’’-240” Table

72”-96” Table

108”-168” Table

180”-192” Table

204”-240” Table

Overhang* Table Width Concurrence Stealth72 16.4” 15.375”84 16.4” 15.375”96 16.4” 15.375”108 22.4” 21.375”120 22.4” 21.375”132 22.4” 21.375”144 22.4” 21.375”156 22.4” 21.375”168 22.4” 21.375”180 22.4” 21.375”192 22.4” 21.375”204 22.4” 21.375”216 22.4” 21.375”228 22.4” 21.375” 240 22.4” 21.375”

228’’-240’’ Table

108”-156” Table108”-192” Table

(3) Conference Bases (Various types)


(4) Panel Bases


(3) Conference Bases (Various types) (3) Panel Bases


(2) Panel Bases

(2) Braces

Trough

Trough

Trough

24.00” 24.00”

24.00” 22.00”24.00” 22.00”

18.00”

20.00”

18.00”

20.00”

(4) Braces

(6) Braces

Foundation, Statement Individual Panel Base Location

Foundation Panel Base and Trough Kits

Concurrence and Stealth Base and Trough Tables

21.00”

24.00”24.00”

24.00”

|– * –| |– * –|

21.00”

24.00”

|– * –|

|– * –| |– * –|

|– * –|

|– * –| |– * –|

Base Locations

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

26

Individual Panel Base Depth Recommendation for Boat Tables Total Bases Knee space Between BasesD1 D2 W1 18’’ 24’’ 36’’ 6’’ 10’’ 36 24 72 2 + 0 + 0 2 *30 *2636 24 84 2 + 0 + 0 2 *42 *3836 24 96 2 + 0 + 0 2 42 3842 30 72 2 + 0 + 0 2 *30 *2642 30 84 2 + 0 + 0 2 *42 *3842 30 96 2 + 0 + 0 2 42 3848 36 72 0 + 2 + 0 2 *30 *2648 36 84 0 + 2 + 0 2 *42 *3848 36 96 0 + 2 + 0 2 42 38

48 36 108 2 + 1 + 0 3 24 2048 36 120 2 + 1 + 0 3 30 2648 36 132 2 + 1 + 0 3 36 3248 36 144 2 + 1 + 0 3 42 3848 36 156 2 + 1 + 0 3 48 4448 36 168 2 + 1 + 0 3 54 5048 36 180 2 + 1 + 0 3 *42 *3848 36 192 2 + 1 + 0 3 *46 *42

48 36 204 2 + 2 + 0 4 46 4248 36 216 2 + 2 + 0 4 50 4648 36 228 2 + 2 + 0 4 54 5048 36 240 2 + 2 + 0 4 58 54

60 48 96 0 + 2 + 0 2 42 38

60 48 108 0 + 2 + 1 3 24 260 48 120 0 + 2 + 1 3 30 2660 48 132 0 + 2 + 1 3 36 3260 48 144 0 + 2 + 1 3 42 3860 48 156 0 + 2 + 1 3 48 4460 48 168 0 + 2 + 1 3 54 5060 48 180 0 + 2 + 1 3 *42 *3860 48 192 0 + 2 + 1 3 *46 *42

60 48 204 0 + 2 + 2 4 46 4260 48 216 0 + 2 + 2 4 50 4660 48 228 0 + 2 + 2 4 54 5060 48 240 0 + 2 + 2 4 58 54

*These individual bases are set in 18’’ to center from end of table, all others are 24’’ to center from end of table.

D1

W1

D2

Ordering Information: > All bases must be the same depth when using Concurrence Individual Bases with beams.> ConcurrenceandStealthBaseandTroughKitsfor36"and42"Dconferencerectangletopsdonotfit36"and

42"D Boat, Ellipse, or Capsule tops because of the tapered ends. > Foundation Base Kits are available for 36" and 42"D rectangle tops but not 36" and 42" Boat, Ellipse, or

Capsule tops because of the tapered ends.

Boat, Ellipse, and Racetrack TableIndividual Base ”Depth” Recommendations

27

Centered (Qty. 1)

Between Bases (Qty. 2)

Between Bases (Qty. 3)

Conference Table Power/Data Standard Cut-outs

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

28

Table Leg and Base Specifications

Adventure > 1.5”x3.5”Balticbirchlegwithclear,maplefinish> 7 gauge steel top plate and metal assembly for legs> Top plate sizes • 10” x 28” for 30 - 36”D table leg kits • 10” x 34” for 42 - 48”D table leg kits • 10” x 46” for 54 - 60”D table leg kits> Foot bars are .25” T-channel> Adjustable levelers> Locking casters> Legs ship assembled

Concurrence> Base height is 27.75"> 7 gauge top plate> Aluminum extrusion (.090 wall thickness) construction

with particle board support> 5" or 12"W individual bases> Cable access door optional on 12"W individual base> Levelers included

Disc Bases> Base height is 27.75’’, Bar Height is 40.75"> 7 gauge top plate> Bolted base - 3/8” plate steel> Vertical tubing is 3’’ or 4’’ tubing and 17 gauge

or 14 gauge> Levelers (available on select part numbers) have 5/8” adjustment

Equilibrium Round> Base height is 27.875” for seated heights and

40.875” for standing heights> 3/8” Steel welded steel construction for frame> Cosmetic and removable covers are 20 gauge steel> Base for 36” - 54” diameter tops is 3.5” x 6”> Base for 60” - 84” diameter tops is 6” x 8”> Must be bolted to 4” thick concrete

Foundation Panel Bases> Base height is 27.75”> 3/4” double sided melamine construction, cam lock

and doweled> Levelers included

Foundation Drum Bases> Base height is 27.75”> 1/4” BendiPly wrapping, 3/4” thick HPL construction> Levelers included

Impression> Leg height is 27.75”> 8 gauge foot and top plate Top plate sizes: • 6” x 6” – Straight Leg, 4-Post X-Base (qty. 4) • 6” x 8” – C, T, TT (qty. 2) Legs • 12” x 12” – X-Base> Vertical rectangular tubing is 3” x 1.5”, 14 gauge forallfixedlegs

> Vertical square tubing is 2.5” x 2.5”, 14 gauge for allfixedX-basesand1.5"x1.5"forstraightlegs

> 12 gauge crossbars on adjustable height legs> 20 gauge powerlex modesty> Levelers have 1” of adjustment> Casters are all locking> Flip tables lock in up (vertical) and down (horizontal)

positions and have a die cast aluminum release handle> Optional Routing Holes are 2”W x 2.75”H

Lugano > Post-formed laminate cabinet> 11- and 14-gauge steel mitered, tapered plinth and top plate> Electric height-adjustable range is 30” - 49.5”> Electric height-adjustable base supports 300 lbs.> Levelers included

Sawhorse> Leg height is 27.75”> Vertical rectangular tubing is 3” x 1.5”, 14 gauge> Levelers have 1” of adjustment> Square tubing is 1.5" x 1.5", 14 gauge> 7 gauge top plate

Sensation > Leg height is 27.75”> 7 gauge top plate Top plate sizes: • 6” x 6” – Straight Leg, 4-Post X-Base (qty. 4) • 6” x 8” – C, T, TT (qty. 2), Y Legs, Split Y-Leg Bases • 9.5” x 9.5” – LMXA/LMXB X-Bases • 12” x 12” – LMXC/LMXD X-Bases, LMYB Y-Leg Bases> Pin set adjustable height is 24.75’’ - 33.75’’> Welded column, bolted feet construction> Feet are made of die cast aluminum> Vertical tubing is 2.36” diameter, 14 gauge> Levelers are 3/8-16 x 1’’> Casters are 3’’ Nylon Twin Wheel with brake and all locking> Flip tables lock in up (vertical) and down (horizontal) positions

and have a die cast aluminum release handle> Optional Routing Holes are 1.5” diameter.

29

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

SSolano (formerly Captiva)> Leg height is 27.75”> 7 gauge steel foot > 8 gauge steel top plate Top plate sizes: • 6” x 6” – Straight Leg, 4-Post X-Base (qty. 4) • 6” x 8” – C, T, TT (qty. 2) Legs • 12” x 12” – X-Base> Vertical rectangular tubing is 3” x 1.5”, 14 gauge forallfixedlegs

> Vertical square tubing is 2.5” x 2.5”, 14 gauge for all fixedXbasesand1.5”x1.5”forstraightlegs

> 12 gauge crossbars on adjustable height legs> 20 gauge powerlex modesty> Levelers have 1” of adjustment> Casters are all locking> Flip tables lock in up (vertical) and down (horizontal)

positions and have a die cast aluminum release handle> Optional Routing Holes are 2”W x 2.75”H

Solano Fast Crank > Height range is 26” - 44” (including top)> Lifts 110 lbs when moving, 210 lbs when static

(load capacity includes weight of worksurface) > Requires approximately two turns per inch

Square Bases> Base height is 27.75’’, Bar Height is 40.75"> 7 gauge top plate> Bolted base - 3/8” plate steel> Vertical tubing is 3’’ or 4’’ tubing and 17 gauge

or 14 gauge> Levelers (available on select part numbers) have

5/8” adjustment

Stealth > Base height is 27.75"> Aluminum extrusion .090 wall thickness) construction

with particle board support> Levelers included> 7 gauge top plate

Value> Leg height is 27.75”> 7 gauge top plate> Fully welded construction> Vertical tubing is 1.9’’ diameter, 14 gauge> Horizontal feet are 1.9’’ diameter tubing, 14 gauge> Levelers are 3/8-16 x 1.375’’> Casters are 2’’ Nylon Twin Wheel with brake

and all locking> Flip tables lock in up (vertical) and down

(horizontal) positions and have a die cast aluminum release handle

Zori > Leg height is 27.75”> 7 gauge top plate • Top plate sizes: • 6” x 6” - 4-Post X-Base • 6” x 8” - C, T, TT, straight legs, Y-Legs, Split Y-Leg bases • 9.5” x 9.5” - CYXA/CYXB X-Bases • 12” x 12” - CYXC/CYXD X-Bases> Aluminum Columns • T, C Legs, 1.75” x 3” • X Base, 2.25” x 2.25”> Cast aluminum feet> Barflipmechthatlocksintheup(vertical)and

down (horizontal) positions> Adjustable levelers> Locking casters

30

Top (Worksurface) Specifications

General Information on Wood Cores> Passes all NEMA and BIFMA tests for high pressure

laminate worksurfaces. > Core material is 1.125” thick, M3 rated (45 lb.) furniture grade particleboard.> FSC Mixed Sources accreditation.> ISO140001certificationforwoodcores.> Made from 30% post-consumer and 70% pre-consumer

recycled content.> Eco-CertifiedCompositeGrademarkProgram(ECC)certifiedbyCompositePanelAssociation(CPA).

> CARB Phase 2 compliant for formaldehyde emissions less than 0.09ppm.

> Adhesives are solvent free water based PVA (poly vinyl acetate).

> Formaldehyde-free cores are available via special quote at [email protected].

> Tables have a 200 pound load capacity (functional load).

Standard Laminates and Melamines> HPL (high pressure laminate) construction, .030” or .050"

thick depending on color.> Backer is moisture-resistant phenolic material for

balanced construction. > LaminatesandbackersareGreenguardcertifiedfor

Indoor Air Quality.> Two standard laminates (Wilsonart Field Elm 7999K-12

and Grey Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

> PVC (default) or ABS (upon request, call for quote) edge choices in 3mm, and Knife.

> Other edge choices include Veneer and Solid Wood.

Contour Laminates> Commonly known as Rigid Thermofoil (RTF).> Contour Laminate is high performance, with comparable

durability to HPL laminate.> The taper edge is seamless with no visible edgeband

or t-molds, offering an inherent anti-microbial sealed surface.

Woods> Natural veneers are used in Maple, Cherry, and

Walnut species.> Two and three piece tops use full-cut slip-matched

veneers.> Edge choices in 3mm (wood), Taper (solid wood),

Knife (wood), Bullnose (solid wood) and Ultra (sold wood).

31

Designer Finish Top Specifications

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

SBack-Painted Glass > 3/8”thick,annealed,flat-polishedlowiron.Availableas

clear glass (B) or satin-etched/frosted glass (D). 1-1/8” knife edge MDF substrate* painted to match. Brilliant white and black as standard (white matches Benjamin Moore brilliant white paint). Any Benjamin Moore color available upon request. $2000 list custom color fee applies for orders of less than 250 sq. ft. There is also a 20% upcharge to each top’s list price for custom colors. Actual depth of 60”D tops is 59” due to yield.

Due to weight of material, some tops will include an extra piece of glass to help avoid damage during handling and installation. Top substrates will remain the standard number of pieces. See below for the top shapes and sizes affected.

**Enwork makes every effort to accurately produce custom colored back-painted glass using the best specialized low-iron glass on the market. Despite these efforts, there is still a natural iron variation in all glass on a sheet-by-sheet basis which affects color match (iron causes a green hue in glass color). Similar to a wood veneer, where no two trees are the same, a glass samplemaynotperfectlymatchthefinalproduct.

Rectangle, Rounded Rectangle, Boat, Capsule, and Wedge Tops:

54/60”D x 84/96”W 2-piece glass, 1-piece substrate 54/60”D x 156/168/180/192”W 3-piece glass, 2-piece substrate

54/60”D x 228/240”W 4-piece glass, 3-piece substrate

KrystalCast®

> Acrylic on MDF* or birch ply is available in any Benjamin Moore color. Super White is by far the most popular. See www.KrystalCast.com for technical specs and care instructions.

Solid Surface (Wilsonart)> Designer White as standard. See http://wilsonart.com/

commercial/solid-surfaces/designs for additional finish/colorchoices.Pricevariesbyfinish/color,contact [email protected] with your preferred selection.

Quartz (Cambria) > Seewww.cambriausa.comforfinish/colorchoices.

13/16" thick. Undersized 1-1/8" knife edge substrate* painted black. Due to sheet size availability, some 60"D (only) tops come in twice the quantity of pieces. (For example, a top that normally comes in 3 pieces will come in 6 pieces.)

Tip: Quartz patterns on multi-piece tops do not align. AllCambriadesignsareavailableinmattefinish.

Contact [email protected] for additional information.

**There is a 30% upcharge (18% upcharge for Landing Team Tables) for polished Luxury Cambria Quartz Colors: Annicca, Baybridge, Bentley, Blackpool Matte, Brittanicca, Brittanicca Gold, Brittanicca Warm, Clairidge, Clareanne, Delgatie, Ella, Golden Dragon, Huntley, Ironsbridge, Islington, Levven, Marwell, Mayfair, Mersey, Myddleton, Oakmoor, Queen Anne, Roxwell, Skara Brae, and White Cliff. Note: See www.cambriausa.com for a comprehensive list.

Tip: All matte quartz must be quoted through [email protected].

Tip: Due to the extra weight, Quartz conference table tops are only recommended for use on Concurrence, Stealth, Landing, Equilibrium, and Foundation (with trough) table bases.

Birch Ply Edges > Edgeisclearcoatedwhenspecifiedwithlaminate

and stained-to-match when sold with veneer. Actual width of 96"W is 95". Actual width of 192"W is 190" due to yield.

* The sides and cut of MDF substrates are painted. The top and bottom of the substrate is not painted.

32

(@) Cable Management Suffix List:N No Cable Management no chargeG Grommet (one, center rear) +$19P Powerlex Grommet (one left, one right) +$37U Power/Data Cut-out (one, center rear) +$37K Power/Data Cut-out (one, center of table) +$37X Other TBD

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK StandardLaminate–KnifeEdge(frontonly,sides/backflat)C Standard Laminate – Knife Edge (all sides) T Contour Laminate – Taper EdgeE Standard Laminate – 3mm Wood EdgeP Standard Veneer – 3mm Wood Edge

Knife edge front only available if CR is chosen in Step 1.Taperedgeisfrontonly,sides/backflatifCRischoseninStep1.

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, -60). +15%

Orders of 100+ units have no upcharge.Y Formica Non-Premium (58, 43, MC, SP and +20% NTfinishes)andWilsonartPremium(-07,-12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non-Premium, +25% Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminates. Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].

(#) Contour Laminate Suffix List: G Natural MapleR Hayward CherryS Studio White MatrixV River CherryW Designer White

(#) Veneer Suffix List:D Maple (stained similar to Kensington Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list Stain Match fee) +10%

STEP 3

STEP 4

STEP 2

(XX) Top Shape Prefix List:

D1

W1

(SF) Rounded Rectangle

STEP 1

**

**

**

W1

(CR) Rectangle

D1

Training Table Tops (18’’D)

STANDARD CONTOUR LAMINATE LAMINATE

PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES Suffix K D1 W1 INCLD. Part Number Suffix A Suffix L Suffix C Suffix T 18 30 0 - XX1830&@# $228 $228 $294 $30818 36 0 - XX1836&@# $248 $248 $322 $33718 42 0 - XX1842&@# $275 $275 $356 $37318 48 0 - XX1848&@# $296 $296 $382 $40018 54 0 - XX1854&@# $366 $366 $472 $49718 60 1 - XX1860&@# $429 $447 $554 $57618 66 1 - XX1866&@# $475 $481 $597 $62218 72 1 - XX1872&@# $475 $481 $597 $62218 78 1 - XX1878&@# $606 $612 $766 $80018 84 1 - XX1884&@# $606 $612 $766 $80018 90 1 - XX1890&@# $619 $644 $804 $84318 96 1 - XX1896&@# $619 $644 $804 $843

Laminate & Veneer

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages 316-324.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

****

(SIN 711-11)

33

STANDARD STANDARD LAMINATE VENEER

3MM 3MM WOOD EDGE WOOD EDGE BRACESD1 W1 INCLD. Part Number Suffix E Suffix P 18 30 0 - XX1830&@# $430 $49218 36 0 - XX1836&@# $501 $57618 42 0 - XX1842&@# $575 $65818 48 0 - XX1848&@# $648 $74318 54 0 - XX1854&@# $721 $82618 60 1 - XX1860&@# $873 $99118 66 1 - XX1866&@# $945 $107518 72 1 - XX1872&@# $1017 $115818 78 1 - XX1878&@# $1092 $123918 84 1 - XX1884&@# $1166 $133018 90 1 - XX1890&@# $1238 $141218 96 1 - XX1896&@# $1309 $1490

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

34

(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center rear) +$19P Powerlex Grommet (one left, one right) +$37U Power/Data Cut-out (one, center rear) +$37K Power/Data Cut-out (one, center of table) +$37X Other TBD




Orders of 100+ units have no upcharge.Y Formica Non-Premium (58, 43, MC, SP and +20% NTfinishes)andWilsonartPremium(-07,-12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non-Premium, +25% Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminates. Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].



STEP 3

STEP 4

STEP 2

(XX) Top Shape Prefix List:STEP 1

**

**

**

D1

W1


W1

(CR) Square/Rectangle

D1

W1

D1



PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES Suffix K D1 W1 INCLD. Part Number Suffix A Suffix L Suffix C Suffix T 24 24 0 - XX2424&@# $222 $224 $288 $30424 30 0 - XX2430&@# $233 $235 $302 $31924 36 0 - XX2436&@# $255 $257 $331 $34824 42 0 - XX2442&@# $281 $281 $363 $38124 48 0 - XX2448&@# $303 $303 $391 $41024 54 0 - XX2454&@# $369 $369 $475 $49924 60 1 - XX2460&@# $432 $450 $558 $57924 66 1 - XX2466&@# $479 $484 $600 $62524 72 1 - XX2472&@# $479 $484 $600 $62524 78 1 - XX2478&@# $609 $615 $770 $80324 84 1 - XX2484&@# $609 $615 $770 $80324 90 1 - XX2490&@# $622 $647 $808 $84824 96 1 - XX2496&@# $622 $647 $808 $848


Laminate & Veneer

****

(SIN 711-11)

35


3MM 3MM WOOD EDGE WOOD EDGE BRACES D1 W1 INCLD. Part Number Suffix E Suffix P 24 24 0 - XX2424&@# $449 $51124 30 0 - XX2430&@# $536 $61624 36 0 - XX2436&@# $625 $71824 42 0 - XX2442&@# $715 $82324 48 0 - XX2448&@# $806 $93024 54 0 - XX2454&@# $895 $103624 60 1 - XX2460&@# $1066 $121724 66 1 - XX2466&@# $1155 $132624 72 1 - XX2472&@# $1244 $142924 78 1 - XX2478&@# $1337 $153524 84 1 - XX2484&@# $1426 $164024 90 1 - XX2490&@# $1515 $174624 96 1 - XX2496&@# $1603 $1851

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

36





Orders of 100+ units have no upcharge.Y Formica Non-Premium (58, 43, MC, SP and +20% NTfinishes)andWilsonartPremium(-07,-12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non-Premium, +25% Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminates.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].



STEP 3

STEP 4

STEP 2


**

**

**

D1

W1


W1


D1

W1

D1



PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES Suffix K D1 W1 INCLD. Part Number Suffix A Suffix L Suffix C Suffix T 30 30 0 - XX3030&@# $284 $287 $369 $62930 36 0 - XX3036&@# $324 $328 $421 $68530 42 0 - XX3042&@# $344 $344 $446 $70830 48 0 - XX3048&@# $372 $372 $479 $74530 54 0 - XX3054&@# $438 $438 $565 $83430 60 1 - XX3060&@# $498 $518 $646 $91630 66 1 - XX3066&@# $571 $576 $721 $99130 72 2 - XX3072&@# $555 $576 $720 $99130 78 2 - XX3078&@# $673 $680 $855 $113430 84 2 - XX3084&@# $673 $680 $855 $113430 90 2 - XX3090&@# $701 $728 $911 $119730 96 2 - XX3096&@# $701 $728 $911 $1197


Laminate & Veneer

******

(SIN 711-11)

37


3MM 3MM WOOD EDGE WOOD EDGE BRACES D1 W1 INCLD. Part Number Suffix E Suffix P

30 30 0 - XX3030&@# $643 $74230 36 0 - XX3036&@# $752 $86830 42 0 - XX3042&@# $857 $99330 48 0 - XX3048&@# $966 $111930 54 0 - XX3054&@# $1073 $124530 60 1 - XX3060&@# $1260 $145230 66 1 - XX3066&@# $1368 $157730 72 2 - XX3072&@# $1474 $170230 78 2 - XX3078&@# $1582 $182930 84 2 - XX3084&@# $1688 $195430 90 2 - XX3090&@# $1795 $208030 96 2 - XX3096&@# $1902 $2206

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

38

STEP 2


D1

W1


D1

W1

(CA) Racetrack (Capsule)

W1

(EL) EllipseTip: Ellipse tops only

available up to 144”W.

D1

STEP 1

W1

(BT) Boat

D1 D2


(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK StandardLaminate–KnifeEdge(frontonly,sides/backflat)C Standard Laminate – Knife Edge (all sides) T Contour Laminate – Taper EdgeE Standard Laminate – 3mm Wood EdgeP Standard Veneer – 3mm Wood EdgeQ Standard Veneer – Taper Wood EdgeR Standard Veneer – Knife w/ 3mm Wood EdgeU Standard Veneer – Bullnose Wood EdgeV Standard Veneer – Ultra Wood Edge

Knife edge front only available if CR is chosen in Step 1.IfCRischoseninStep1:SuffixT,Q,R,U,andVedgeisfrontonly,sides/backflat.


Orders of 100+ units have no upcharge.Y FormicaNon-Premium(58,43,MC,SPandNTfinishes) +20% and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non-Premium, Formica +25% Premium (WR, 42, 77, 46, RD Finishes), and Formica

459-90 Brite White whiteboard laminates. Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].



STEP 3

STEP 4

**

**

**

********

W1


D1

W1

D1



PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES Suffix K D1 W1 INCLD. Part Number Suffix A Suffix L Suffix C Suffix T 36 36 0 - XX3636&@# $346 $350 $449 $71436 42 0 - XX3642&@# $404 $404 $521 $78836 48 0 - XX3648&@# $438 $443 $569 $84236 54 0 - XX3654&@# $539 $545 $700 $97836 60 2 - XX3660&@# $701 $708 $866 $114036 66 2 - XX3666&@# $771 $779 $958 $123836 72 2 - XX3672&@# $771 $779 $958 $123836 78 2 - XX3678&@# $931 $941 $1166 $145436 84 2 - XX3684&@# $931 $941 $1166 $145436 90 2 - XX3690&@# $931 $941 $1166 $145436 96 2 - XX3696&@# $931 $941 $1166 $1454

Product Specifications: > D2 is 12" less than D1 on Boat tops.> Veneer knife wood edge (R) is 0.12” wide (3mm).


Laminate & Veneer

****

(SIN 711-11)

39


3MM 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE BRAES D1 W1 INCLD. Part Number Suffix E Suffix P Suffix Q Suffix R Suffix U Suffix V 36 36 0 - XX3636&@# $876 $1014 n/a n/a n/a n/a36 42 0 - XX3642&@# $1001 $1161 n/a n/a n/a n/a36 48 0 - XX3648&@# $1124 $1309 n/a n/a n/a n/a36 54 0 - XX3654&@# $1250 $1455 n/a n/a n/a n/a36 60 2 - XX3660&@# $1535 $1764 n/a n/a n/a n/a36 66 2 - XX3666&@# $1663 $1912 n/a n/a n/a n/a36 72 2 - XX3672&@# $1786 $2056 $2843 $2181 $2539 $284336 78 2 - XX3678&@# $1913 $2209 n/a n/a n/a n/a36 84 2 - XX3684&@# $2036 $2352 $3223 $2475 $2886 $322336 90 2 - XX3690&@# $2159 $2498 n/a n/a n/a n/a 36 96 2 - XX3696&@# $2283 $2643 $3597 $2766 $3228 $3597

** ** ** **

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

40

(@) Cable Management Suffix List:N No Cable Management no chargeG Grommet (one, center) +$19K One Pwr/Data Cut-out, Centered +$37D Two Pwr/Data Cut-outs, Between Outer Bases +$74E Three Pwr/Data Cut-outs, Between Bases +$111F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$102X Other TBD

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK Standard Laminate – Knife EdgeT Contour Laminate – Taper EdgeE Standard Laminate – 3mm Wood EdgeF Standard Laminate – Taper Wood EdgeG Standard Laminate – Knife Wood EdgeH Standard Laminate – Bullnose Wood EdgeP Standard Veneer – 3mm Wood EdgeQ Standard Veneer – Taper Wood EdgeR Standard Veneer – Knife w/ 3mm Wood EdgeU Standard Veneer – Bullnose Wood EdgeV Standard Veneer – Ultra Wood EdgeB Back-Painted Glass on 1-1/8" Knife Edge MDFD Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDFJ **Quartz (Cambria) on MDF - 3mm Edge5 KrystalCast® on MDF - Knife Edge6 KrystalCast® on Ply - Flat Ply EdgeM Designer White Solid Surface (Wilsonart) - 2 1/8” Flat EdgeN Designer White Solid Surface (Wilsonart) - 1-1/4" Knife EdgeY Statement Laminate Top - 2 1/8” Flat Ply Edge2 Statement Laminate Top - 1 1/4” Flat Ply Edge3 Statement Laminate Top - Knife Ply EdgeZ Statement Veneer Top - 2 1/8” Flat Ply Edge4 Statement Veneer Top - Knife Ply Edge**30% Upcharge for polished Luxury Cambria Quartz Colors. See pg 31 for details.Tip: Quartz patterns on multi-piece tops do not align.




(#) Contour Laminate Suffix List: (n/a on Statement Ply)G Natural MapleR Hayward CherryS Studio White MatrixV River CherryW Designer White(#) Veneer Suffix List:D Maple (stained similar to Kensington Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list Stain Match fee) +10%(#) Glass Paint Suffix List:W White No chargeB Black +$1000

STEP 3

STEP 4 - Laminate, Veneer, Back-Painted Glass, and Statement Ply Only

STEP 2


D1

W1


W1



D1

W1

(BT) Boat

D1 D2D1

W1


W1

(CR) Rectangle

D1

Conference Table Tops (36’’D)

WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF

BRACES KNIFE EDGE KNIFE EDGE

D1 W1 INCLD. Part Number Suffix B Suffix D

36 72 2 - XX3672&@ $5950 $689836 84 2 - XX3684&@ $6613 $772036 96 2 - XX3696&@ $7409 $8673

For other color options, see page 31.

Designer Finishes

(SIN 711-11)

41

Product Specifications:> Edgeprofileisthesameonallsides.> D2 is 12" less than D1 on Boat tops. > Multi-piece tops come with alignment hardware.> Seepage31forDesignerFinishspecifications.> Laminate knife wood edge (G) is 1.9” wide. Veneer knife wood edge (R) is 0.12” wide (3mm).

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. (Stealth,

Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages 316-324.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

DESIGNER WHITE STATEMENT STATEMENT KRYSTALCAST® KRYSTALCAST® SOLID SURFACE **QUARTZ LAMINATE TOP W/ VENEER TOP W/ ON MDF ON PLY (WILSONART) (CAMBRIA) BIRCH PLY EDGE BIRCH PLY EDGE

FLAT PLY 2-1/8” FLAT 1 1/4” KNIFE 2-1/8" FLAT 1-1/4"KNIFE 2-1/8" FLAT 1-1/4"KNIFE BRACES KNIFE EDGE EDGE EDGE EDGE FLAT EDGE EDGE EDGE EDGE EDGE

D1 W1 INCLD. Part Number Suffix 5 Suffix 6 Suffix M Suffix N Suffix J Suffix Y Suffix 3 Suffix Z Suffix 4

36 72 2 - XX3672&@# $5872 $6710 $6247 $5622 $7908 $2855 $3230 $3200 $357536 84 2 - XX3684&@# $6851 $7829 $7168 $6485 $9226 $3196 $3610 $3598 $401336 96 2 - XX3696&@# $8217 $9336 $8092 $7347 $10,544 $3538 $3991 $3996 $4450




36 72 2 - XX3672&@ $5950 $689836 84 2 - XX3684&@ $6613 $772036 96 2 - XX3696&@ $7409 $8673

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

42

D1

W1


W1



D1

W1

(BT) Boat

D1 D2D1

W1


STEP 2


(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Pwr/Data Cut-out, Centered +$37D Two Pwr/Data Cut-outs, Between Outer Bases +$74E Three Pwr/Data Cut-outs, Between Bases +$111F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$102X Other TBD





(#) Contour Laminate Suffix List: (n/a on Statement Ply)G Natural MapleR Hayward CherryS Studio White MatrixV River CherryW Designer White


(#) Glass Paint Suffix List:W White No chargeB Black +$1500


W1


D1

W1

D1



PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T 42 42 0 - XX4242&@# $446 $446 $574 $120642 48 0 - XX4248&@# $461 $461 $594 $122742 54 0 - XX4254&@# $553 $553 $713 $135242 60 2 - XX4260&@# $718 $718 $878 $151542 66 2 - XX4266&@# $791 $791 $974 $161342 72 2 - XX4272&@# $791 $791 $974 $161342 78 2 - XX4278&@# $943 $955 $1183 $183542 84 2 - XX4284&@# $943 $955 $1183 $183542 90 2 - XX4290&@# $955 $955 $1183 $183542 96 2 - XX4296&@# $955 $955 $1183 $1835




42 72 2 - XX4272&@ $6746 $785242 84 2 - XX4284&@ $7521 $881042 96 2 - XX4296&@ $8295 $9770


Designer Finishes

Laminate & Veneer

(SIN 711-11)

43

Product Specifications:> Edgeprofileisthesameonallsides.> D2 is 12" less than D1 on Boat tops. > Multi-piece tops come with alignment hardware.> Seepage31forDesignerFinishspecifications.> Laminate knife wood edge (G) is 1.9” wide. Veneer knife wood edge (R) is 0.12” wide (3mm).


Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages 316-324.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STANDARD LAMINATE STANDARD WOOD EDGE VENEER

3MM TAPER KNIFE BULLNOSE 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA BRACES WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 42 42 0 - XX4242&@# $1118 $1652 $1712 $1415 $1301 $1949 $1415 $1711 $194942 48 0 - XX4248&@# $1253 $1828 $1891 $1573 $1463 $2156 $1618 $1903 $215642 54 0 - XX4254&@# $1397 $2006 $2073 $1735 $1629 $2368 $1786 $2095 $236842 60 2 - XX4260&@# $1697 $2342 $2414 $2056 $1953 $2737 $2116 $2450 $273742 66 2 - XX4266&@# $1836 $2520 $2597 $2217 $2120 $2949 $2284 $2644 $294942 72 2 - XX4272&@# $1974 $2695 $2776 $2376 $2283 $3156 $2449 $2835 $315642 78 2 - XX4278&@# $2115 $2873 $2958 $2538 $2450 $3368 $2619 $3032 $336842 84 2 - XX4284&@# $2254 $3047 $3138 $2696 $2611 $3577 $2786 $3223 $357742 90 2 - XX4290&@# $2390 $3225 $3316 $2853 $2774 $3783 $2953 $3415 $378342 96 2 - XX4296&@# $2527 $3397 $3493 $3010 $2935 $3991 $3116 $3606 $3991




42 72 2 - XX4272&@# $7239 $8217 $7065 $6410 $9226 $3097 $3472 $3442 $381742 84 2 - XX4284&@# $8381 $9522 $8105 $7392 $10,764 $3439 $3853 $3840 $425542 96 2 - XX4296&@# $9522 $10,827 $9147 $8374 $12,302 $3781 $4233 $4239 $4692




42 72 2 - XX4272&@ $6746 $785242 84 2 - XX4284&@ $7521 $881042 96 2 - XX4296&@ $8295 $9770

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

44

STEP 2

(XX) Top Shape Prefix List: D1

W1


D1

W1


W1



D1

STEP 1 W1


D1

W1

D2 D1

(WC) WedgeTip: Wedge tops available

72-240”W.








(#) Glass Paint Suffix List:W White No chargeBlack +$2000

STEP 3


W1

(BT) Boat

D1D2

W1

D1



PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T 48 48 0 - XX4848&@# $505 $505 $651 $128648 54 0 - XX4854&@# $598 $598 $771 $141148 60 2 - XX4860&@# $755 $763 $936 $157548 66 2 - XX4866&@# $832 $840 $1035 $167948 72 2 - XX4872&@# $832 $840 $1035 $167948 78 2 - XX4878&@# $943 $953 $1180 $183348 84 2 - XX4884&@# $943 $953 $1180 $183348 90 2 - XX4890&@# $998 $1008 $1250 $190548 96 2 - XX4896&@# $998 $1008 $1250 $1905 48 108 0 2 pcs XX48108&@# $1157 $1157 $1418 $233448 120 0 2 pcs XX48120&@# $1191 $1191 $1420 $238248 132 0 2 pcs XX48132&@# $1309 $1309 $1561 $256048 144 0 2 pcs XX48144&@# $1342 $1342 $1601 $260948 156 0 2 pcs XX48156&@# $1419 $1419 $1692 $272448 168 4 2 pcs XX48168&@# $1811 $1811 $2094 $338348 180 4 2 pcs XX48180&@# $2012 $2032 $2443 $347048 192 4 2 pcs XX48192&@# $2020 $2039 $2456 $3478 48 204 0 3 pcs XX48204&@# $2367 $2367 $2824 $385848 216 0 3 pcs XX48216&@# $2382 $2382 $2841 $394648 228 6 3 pcs XX48228&@# $2850 $2878 $3292 $461548 240 6 3 pcs XX48240&@# $3289 $3320 $3703 $5214




48 72 2 - XX4872&@ $7409 $867348 84 2 - XX4884&@ $8295 $977048 96 2 - XX4896&@ $9180 $10,865 48 108 0 2 pcs XX48108&@ $11,679 $13,57648 120 0 2 pcs XX48120&@ $12,566 $14,67348 132 0 2 pcs XX48132&@ $13,451 $15,76948 144 0 2 pcs XX48144&@ $14,336 $16,86548 156 0 2 pcs XX48156&@ $15,223 $17,96248 168 4 2 pcs XX48168&@ $16,107 $19,05748 180 4 2 pcs XX48180&@ $16,993 $20,15348 192 4 2 pcs XX48192&@ $18,449 $21,819 48 204 0 3 pcs XX48204&@ $20,468 $24,04948 216 0 3 pcs XX48216&@ $21,352 $25,14448 228 6 3 pcs XX48228&@ $22,677 $26,68048 240 6 3 pcs XX48240&@ $23,562 $27,776


Designer Finishes

Laminate & Veneer

(SIN 711-11)

45

Product Specifications:> Edgeprofileisthesameonallsides.> D2 is 12" less than D1 on Boat tops. > For wedge tops, 72-96”W D2 is 12” less than D1; 108-192”W D2 is 18” less than D1; 204-240”W D2 is 24” less than D1.> Multi-piece tops come with alignment hardware.> Seepage31forDesignerFinishspecifications.> Laminate knife wood edge (G) is 1.9” wide. Veneer knife wood edge (R) is 0.12” wide (3mm).

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. (Stealth, Concurrence, and

Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages 316-324.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


3MM TAPER KNIFE BULLNOSE 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA BRACES WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 48 48 0 - XX4848&@# $1410 $2021 $2089 $1750 $1648 $2386 $1805 $2115 $238648 54 0 - XX4854&@# $1568 $2215 $2287 $1929 $1833 $2618 $1994 $2330 $261848 60 2 - XX4860&@# $1885 $2570 $2644 $2265 $2180 $3008 $2344 $2706 $300848 66 2 - XX4866&@# $2041 $2763 $2843 $2443 $2363 $3238 $2533 $2918 $323848 72 2 - XX4872&@# $2196 $2735 $3039 $2609 $2545 $3466 $2717 $3129 $346648 78 2 - XX4878&@# $2355 $3150 $3237 $2797 $2733 $3698 $2908 $3344 $369848 84 2 - XX4884&@# $2509 $3341 $3433 $2971 $2916 $3926 $3093 $3555 $392648 90 2 - XX4890&@# $2664 $3532 $3631 $3147 $3101 $4155 $3281 $3769 $415548 96 2 - XX4896&@# $2818 $3726 $3826 $3323 $3244 $4347 $3428 $3942 $4347 48 108 0 2 pcs XX48108&@# $3243 $4158 $4258 $3751 $3774 $4876 $4062 $4471 $487748 120 0 2 pcs XX48120&@# $3554 $4542 $4653 $4102 $4142 $5334 $4437 $4897 $533448 132 0 2 pcs XX48132&@# $3866 $4930 $5046 $4457 $4510 $5795 $4814 $5322 $579548 144 0 2 pcs XX48144&@# $4175 $5313 $5427 $4808 $4879 $6251 $5187 $5747 $625148 156 0 2 pcs XX48156&@# $4486 $5697 $5833 $5160 $5245 $6710 $5561 $6172 $671048 168 4 2 pcs XX48168&@# $5122 $6408 $6551 $5837 $5939 $7494 $6260 $6921 $749448 180 4 2 pcs XX48180&@# $5533 $7410 $7751 $6727 $6325 $8143 $6675 $7476 $814348 192 4 2 pcs XX48192&@# $5864 $7838 $8198 $7121 $6706 $8622 $7065 $7917 $8622 48 204 0 3 pcs XX48204&@# $6575 $8777 $9178 $7976 $7474 $9605 $7956 $8820 $960548 216 0 3 pcs XX48216&@# $6861 $9039 $9435 $8247 $7814 $9920 $8294 $9144 $992048 228 6 3 pcs XX48228&@# $7212 $9485 $9899 $8660 $8216 $10,417 $8704 $9606 $10,41748 240 6 3 pcs XX48240&@# $7559 $9930 $10,362 $9069 $8613 $10,911 $9109 $10,065 $10,911




48 72 2 - XX4872&@# $8217 $9336 $7884 $7199 $10,544 $3367 $3762 $3760 $415548 84 2 - XX4884&@# $9522 $10,827 $9042 $8299 $12,302 $3748 $4182 $4206 $464048 96 2 - XX4896&@# $11,022 $12,513 $10,203 $9401 $14,058 $4131 $4602 $4652 $5125 48 108 0 2 pcs XX48108&@# $13,686 $15,363 $11,364 $10,501 $15,816 $4868 $5381 $5459 $597448 120 0 2 pcs XX48120&@# $14,991 $16,856 $12,523 $11,601 $17,574 $5248 $5801 $5906 $645948 132 0 2 pcs XX48132&@# $16,295 $18,346 $13,684 $12,701 $19,332 $5641 $6241 $6362 $696348 144 0 2 pcs XX48144&@# $17,600 $19,838 $14,844 $13,803 $21,089 $6010 $6642 $6797 $742848 156 0 2 pcs XX48156&@# $18,905 $21,328 $16,003 $14,903 $22,846 $6392 $7062 $7245 $791348 168 4 2 pcs XX48168&@# $20,211 $22,820 $17,164 $16,003 $24,603 $7156 $7482 $8136 $839948 180 4 2 pcs XX48180&@# $21,516 $24,312 $18,325 $17,106 $26,361 $7255 $7902 $8249 $888448 192 4 2 pcs XX48192&@# $22,820 $25,803 $19,485 $18,206 $28,119 $7537 $8323 $8582 $9368 48 204 0 3 pcs XX48204&@# $25,678 $28,847 $20,644 $19,306 $29,877 $8346 $9222 $9462 $10,33848 216 0 3 pcs XX48216&@# $26,983 $30,339 $21,805 $20,407 $31,633 $8656 $9522 $9835 $10,70148 228 6 3 pcs XX48228&@# $28,289 $31,829 $22,965 $21,508 $33,391 $9035 $9941 $10,281 $11,18648 240 6 3 pcs XX48240&@# $29,594 $33,322 $24,125 $22,608 $35,148 $9418 $10,362 $10,727 $11,671




48 72 2 - XX4872&@ $7409 $867348 84 2 - XX4884&@ $8295 $977048 96 2 - XX4896&@ $9180 $10,865 48 108 0 2 pcs XX48108&@ $11,679 $13,57648 120 0 2 pcs XX48120&@ $12,566 $14,67348 132 0 2 pcs XX48132&@ $13,451 $15,76948 144 0 2 pcs XX48144&@ $14,336 $16,86548 156 0 2 pcs XX48156&@ $15,223 $17,96248 168 4 2 pcs XX48168&@ $16,107 $19,05748 180 4 2 pcs XX48180&@ $16,993 $20,15348 192 4 2 pcs XX48192&@ $18,449 $21,819 48 204 0 3 pcs XX48204&@ $20,468 $24,04948 216 0 3 pcs XX48216&@ $21,352 $25,14448 228 6 3 pcs XX48228&@ $22,677 $26,68048 240 6 3 pcs XX48240&@ $23,562 $27,776

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

46

Notes

47

Notes

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

48

STEP 2


STEP 1









STEP 3


D1

W1


D1

W1


W1



D1

W1


D1

W1

D2 D1

(WC) WedgeTip: Wedge tops available

72-240”W.

W1

(BT) Boat

D1D2

W1

D1



PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T 60 96 2 - XX6096&@# $1069 $1069 $1343 n/a 60 108 0 2 pcs XX60108&@# $1297 $1297 $1671 n/a60 120 0 2 pcs XX60120&@# $1378 $1378 $1777 n/a60 132 0 2 pcs XX60132&@# $1519 $1519 $1957 n/a60 144 0 2 pcs XX60144&@# $1570 $1570 $2023 n/a60 156 0 2 pcs XX60156&@# $1665 $1665 $2145 n/a60 168 4 2 pcs XX60168&@# $2083 $2083 $2588 n/a60 180 4 2 pcs XX60180&@# $2312 $2335 $3005 n/a60 192 4 2 pcs XX60192&@# $2320 $2342 $3016 n/a 60 204 0 3 pcs XX60204&@# $2494 $2494 $3214 n/a60 216 0 3 pcs XX60216&@# $2501 $2501 $3223 n/a60 228 6 3 pcs XX60228&@# $3495 $3529 $4543 n/a60 240 6 3 pcs XX60240&@# $3504 $3538 $4555 n/a




60 96 2 - XX6096&@ $11,586 $13,693 60 108 0 2 pcs XX60108&@ $13,304 $15,67460 120 0 2 pcs XX60120&@ $14,411 $17,04560 132 0 2 pcs XX60132&@ $16,190 $19,08760 144 0 2 pcs XX60144&@ $17,297 $20,45760 156 0 2 pcs* XX60156&@ $18,974 $22,39860 168 4 2 pcs* XX60168&@ $20,083 $23,76960 180 4 2 pcs* XX60180&@ $21,188 $25,13960 192 4 2 pcs* XX60192&@ $22,295 $26,509 60 204 0 3 pcs XX60204&@ $25,125 $29,60260 216 0 3 pcs XX60216&@ $26,231 $30,97160 228 6 3 pcs* XX60228&@ $27,338 $32,34160 240 6 3 pcs* XX60240&@ $28,446 $33,713


Designer Finishes

Laminate & Veneer

*Number of top pieces may vary when back-painted glass is chosen. See page 31 for details.

(SIN 711-11)

49

Product Specifications:> Edgeprofileisthesameonallsides.> D2 is 12" less than D1 on Boat tops. > For wedge tops, 72-96”W D2 is 12” less than D1; 108-192”W D2 is 18” less than D1; 204-240”W D2 is 24” less than D1.> Multi-piece tops come with alignment hardware.> Seepage31forDesignerFinishspecifications.> Laminate knife wood edge (G) is 1.9” wide. Veneer knife wood edge (R) is 0.12” wide (3mm).

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. (Stealth, Concurrence, and

Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages 316-324.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


3MM TAPER KNIFE BULLNOSE 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA BRACES WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 60 96 2 - XX6096&@# $3397 $4379 $4489 $3942 $3975 $5165 $4166 $4730 $5165 60 108 0 2 pcs XX60108&@# $4308 $5445 $5571 $4939 $5037 $6411 $5345 $5906 $641160 120 0 2 pcs XX60120&@# $4312 $5448 $5574 $4942 $5041 $6415 $5348 $5909 $641560 132 0 2 pcs XX60132&@# $4692 $5903 $6037 $5364 $5492 $6956 $5806 $6418 $695660 144 0 2 pcs XX60144&@# $5068 $6355 $6497 $5784 $5942 $7496 $6263 $6924 $749660 156 0 2 pcs XX60156&@# $5448 $6808 $6959 $6204 $6390 $8034 $6720 $7431 $803460 168 4 2 pcs XX60168&@# $6154 $7587 $7746 $6950 $7166 $8901 $7501 $8263 $890160 180 4 2 pcs XX60180&@# $6678 $8651 $9011 $7934 $7662 $9577 $8021 $8873 $957760 192 4 2 pcs XX60192&@# $7080 $9152 $9529 $8400 $8130 $10,141 $8494 $9402 $10,141 60 204 0 3 pcs XX60204&@# $7819 $9995 $10,392 $9205 $8937 $11,045 $9418 $10,269 $11,04560 216 0 3 pcs XX60216&@# $8221 $10,497 $10,910 $9669 $9406 $11,605 $9894 $10,795 $11,60560 228 6 3 pcs XX60228&@# $8663 $11,035 $11,469 $10,172 $9912 $12,210 $10,408 $11,363 $12,21060 240 6 3 pcs XX60240&@# $9067 $11,538 $11,988 $10,639 $10,381 $12,773 $10,885 $11,894 $12,773




60 96 2 - XX6096&@# $13,825 $15,690 $12,315 $11,453 $17,574 $4828 $5338 $5478 $5990 60 108 0 2 pcs XX60108&@# $16,621 $18,719 $13,713 $12,792 $19,771 $5635 $6180 $6373 $691760 120 0 2 pcs XX60120&@# $18,254 $20,583 $15,111 $14,130 $21,967 $6112 $6702 $6929 $752260 132 0 2 pcs XX60132&@# $19,884 $22,448 $16,510 $15,468 $24,164 $6573 $7203 $7470 $810260 144 0 2 pcs XX60144&@# $21,516 $24,312 $17,908 $16,808 $26,361 $7032 $7701 $8012 $868160 156 0 2 pcs XX60156&@# $23,146 $26,176 $19,306 $18,146 $28,558 $7492 $8201 $8553 $926160 168 4 2 pcs XX60168&@# $24,778 $28,040 $20,704 $19,485 $30,754 $7953 $8701 $9094 $984160 180 4 2 pcs XX60180&@# $26,409 $29,904 $22,103 $20,823 $32,952 $8414 $9200 $9635 $10,42160 192 4 2 pcs XX60192&@# $28,040 $31,769 $23,501 $22,162 $35,148 $8875 $9700 $10,176 $11,000 60 204 0 3 pcs XX60204&@# $31,224 $35,186 $24,899 $23,501 $37,345 $9698 $10,563 $11,086 $11,95260 216 0 3 pcs XX60216&@# $32,856 $37,051 $24,958 $24,840 $39,542 $10,159 $11,064 $11,626 $12,53260 228 6 3 pcs XX60228&@# $34,487 $38,914 $27,695 $26,178 $41,739 $10,618 $11,563 $12,168 $13,11360 240 6 3 pcs XX60240&@# $34,953 $40,778 $29,093 $27,517 $43,935 $11,079 $12,063 $12,709 $13,693




60 96 2 - XX6096&@ $11,586 $13,693 60 108 0 2 pcs XX60108&@ $13,304 $15,67460 120 0 2 pcs XX60120&@ $14,411 $17,04560 132 0 2 pcs XX60132&@ $16,190 $19,08760 144 0 2 pcs XX60144&@ $17,297 $20,45760 156 0 2 pcs* XX60156&@ $18,974 $22,39860 168 4 2 pcs* XX60168&@ $20,083 $23,76960 180 4 2 pcs* XX60180&@ $21,188 $25,13960 192 4 2 pcs* XX60192&@ $22,295 $26,509 60 204 0 3 pcs XX60204&@ $25,125 $29,60260 216 0 3 pcs XX60216&@ $26,231 $30,97160 228 6 3 pcs* XX60228&@ $27,338 $32,34160 240 6 3 pcs* XX60240&@ $28,446 $33,713

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

50

(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Pwr/Data Cut-out, Centered +$37X Other TBD

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK Standard Laminate – Knife EdgeT Contour Laminate – Taper EdgeE Standard Laminate – 3mm Wood EdgeF Standard Laminate – Taper Wood EdgeG Standard Laminate – Knife Wood EdgeH Standard Laminate – Bullnose Wood EdgeP Standard Veneer – 3mm Wood EdgeQ Standard Veneer – Taper Wood EdgeR Standard Veneer – Knife w/ 3mm Wood EdgeU Standard Veneer – Bullnose Wood EdgeV Standard Veneer – Ultra Wood EdgeB Back-Painted Glass on 1-1/8" Knife Edge MDFD Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF5 KrystalCast® on MDF - Knife Edge6 KrystalCast® on Ply - Flat Ply EdgeM Designer White Solid Surface (Wilsonart) - 2 1/8” Flat EdgeN Designer White Solid Surface (Wilsonart) - 1-1/4" Knife EdgeJ **Quartz (Cambria) on MDF - 3mm EdgeY Statement Laminate Top - 2 1/8” Flat Ply Edge2 Statement Laminate Top - 1 1/4” Flat Ply Edge3 Statement Laminate Top - Knife Ply EdgeZ Statement Veneer Top - 2 1/8” Flat Ply Edge4 Statement Veneer Top - Knife Ply Edge**30% Upcharge for polished Luxury Cambria Quartz Colors. See pg 31 for details.Tip: Quartz patterns on multi-piece tops do not align.

STEP 2

STEP 1



459-90 Brite White whiteboard laminates.

Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].



(#) Glass Paint Suffix List:W White No changeB Black +$1000



PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T

- 24 - - R24&@# $215 $215 $276 $289- 30 - - R30&@# $264 $264 $340 $358- 36 - - R36&@# $350 $351 $454 $475- 42 - - R42&@# $424 $424 $546 $574- 48 - - R48&@# $491 $496 $638 $672- 54 - - R54&@# $630 $630 $812 n/a- 60 - - R60&@# $630 $630 $812 n/a- 66 2 2 pcs R66&@# $1338 $1352 $1697 n/a- 72 2 2 pcs R72&@# $1338 $1352 $1697 n/a- 84 2 2 pcs R84&@# $1783 $1801 $2276 n/a

W1 W1

24’’-60’’66’’-84’’

Round Table Tops




- 24 - - R24&@ $1332 $1507- 30 - - R30&@ $2047 $2321- 36 - - R36&@ $2847 $3242- 42 - - R42&@ $3859 $4397- 48 - - R48&@ $4854 $5555- 54 - - R54&@ $6151 $7038- 60 - - R60&@ $7550 $8648- 66 2 2 pcs R66&@ $9773 $11,101- 72 2 2 pcs R72&@ $11,054 $12,635- 84 2 2 pcs R84&@ $14,168 $16,316


Designer Finishes

Laminate & Veneer

(SIN 711-11)

51


3MM TAPER KNIFE BULLNOSE 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA BRACES WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V

- 24 - - R24&@# $399 $637 $663 $532 $423 $748 $585 $644 $748- 30 - - R30&@# $585 $882 $915 $750 $678 $1039 $808 $907 $1039- 36 - - R36&@# $799 $1153 $1193 $997 $908 $1363 $1067 $1205 $1363- 42 - - R42&@# $1049 $1462 $1507 $1278 $1229 $1727 $1368 $1545 $1727- 48 - - R48&@# $1333 $1802 $1855 $1594 $1565 $2135 $1709 $1924 $2135- 54 - - R54&@# $1651 $2179 $2238 $1944 $1942 $2583 $2092 $2348 $2583- 60 - - R60&@# $1997 $2580 $2646 $2321 $2357 $3063 $2509 $2803 $3063- 66 2 2 pcs R66&@# $3090 $3941 $4095 $3632 $3337 $4158 $3616 $3855 $4158- 72 2 2 pcs R72&@# $3544 $4471 $4638 $4134 $3865 $4760 $4149 $4430 $4760- 84 2 2 pcs R84&@# n/a n/a n/a n/a n/a n/a n/a n/a n/a

Product Specifications:> Multi-piece tops come with alignment hardware.> Seepage31forDesignerFinishspecifications.> Laminate knife wood edge (G) is 1.9” wide. Veneer knife wood edge (R) is 0.12” wide (3mm).


Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 72". > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

KRYSTALCAST® DESIGNER WHITE STATEMENT STATEMENT SOLID SURFACE **QUARTZ LAMINATE TOP W/ VENEER TOP W/ ON MDF ON PLY 1" THICK (WILSONART) (CAMBRIA) BIRCH PLY EDGE BIRCH PLY EDGE

FLAT PLY 2-1/8 FLAT 1 1/4” KNIFE FLAT 2-1/8" FLAT 1-1/4"KNIFE 2-1/8" FLAT 1-1/4"KNIFE BRACES KNIFE EDGE EDGE 1" FLAT EDGE EDGE EDGE EDGE EDGE EDGE EDGE

D1 W1 INCLD. Part Number Suffix 5 Suffix 6 Suffix 7 Suffix M Suffix N Suffix J Suffix Y Suffix 3 Suffix Z Suffix 4

- 24 - R24&@# $1305 $1491 $1763 $1874 $1547 $1757 $1339 $1649 $1407 $1718- 30 - - R30&@# $2042 $2330 $2601 $2617 $2231 $2746 $1572 $1965 $1679 $2070- 36 - - R36&@# $2935 $3355 $3626 $3479 $3034 $3954 $1840 $2305 $1991 $2455- 42 - - R42&@# $3999 $4567 $4838 $4462 $3956 $5381 $2151 $2693 $2353 $2894- 48 - - R48&@# $5219 $5965 $6236 $5562 $4996 $7029 $2499 $3117 $2764 $3381- 54 - - R54&@# $7192 $8131 $8676 $6781 $6157 $8897 $2889 $3584 $3221 $3917- 60 - - R60&@# $8739 $9902 $10,447 $8121 $7436 $10,983 $3315 $4083 $3724 $4491- 66 2 2 pcs R66&@# $11,620 $13,025 $13,569 $9579 $8835 $13,291 $4144 $4989 $4644 $5490- 72 2 2 pcs R72&@# $13,491 $15,170 $15,712 $11,427 $10,614 $16,256 $4655 $5576 $5249 $6171- 84 2 2 pcs R84&@# $17,733 $20,016 $20,560 $14,666 $13,743 $21,528 $5794 $6864 $6598 $7668




- 24 - - R24&@ $1332 $1507- 30 - - R30&@ $2047 $2321- 36 - - R36&@ $2847 $3242- 42 - - R42&@ $3859 $4397- 48 - - R48&@ $4854 $5555- 54 - - R54&@ $6151 $7038- 60 - - R60&@ $7550 $8648- 66 2 2 pcs R66&@ $9773 $11,101- 72 2 2 pcs R72&@ $11,054 $12,635- 84 2 2 pcs R84&@ $14,168 $16,316

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

52


(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK Standard Laminate – Knife Edge

STEP 2

STEP 1



459-90 Brite White whiteboard laminates.


STEP 3

STANDARD LAMINATE

PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K

- 24 - - TSQ24&@# $218 $250 $283- 30 - - TSQ30&@# $269 $309 $349- 36 - - TSQ36&@# $350 $402 $455- 42 - - TSQ42&@# $431 $495 $560- 48 - - TSQ48&@# $491 $564 $638- 54 - - TSQ54&@# $642 $738 $834- 60 - - TSQ60&@# $642 $738 $834

- 66 2 2 pcs TSQ66&@# $1338 $1538 $1739- 72 2 2 pcs TSQ72&@# $1338 $1538 $1739

W1 W1

24’’-60’’66’’-72’’

Squircle Table Tops

Laminate & Veneer

Product Specifications:> Multi-piece tops come with alignment hardware.> Great care is taken on 2-piece tops to match laminate wood grains as close as possible given the limiations

of pattern, shape, laminate repeatability, and manufacturing tolerances. 3+ piece tops are not grain matched as most laminate sheets only allow for 2 pieces to match.

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(SIN 711-11)

53

Notes

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

54

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm Edge (all sides)L Standard Laminate – PVC Edge w/ Ply look (all sides)K Standard Laminate – Knife Edge (front only (W1),

sides/backflat(D1/W2))

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, -60). +15% Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +20% MC,SPandNTfinishes)andWilsonartPremium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +25%

Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminate.


STEP 3

STEP 1

STEP 2(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (center rear) +$19U Power/Data Cut-out (one, center rear) +$37X Other TBD

(SIN 711-11)

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities.

Maximum span between legs is 72”. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STANDARD LAMINATE

BRACES 3MM EDGE PVC PLY EDGE KNIFE EDGE

D1 W1 W2 INCLD. Part Number Suffix A Suffix L Suffix K

24 36 24 0 TTR2436&@# $263 $302 $34124 42 30 0 TTR2442&@# $294 $337 $38224 48 36 0 TTR2448&@# $318 $365 $41324 54 42 0 TTR2454&@# $386 $444 $50124 60 48 0 TTR2460&@# $446 $512 $57924 72 60 0 TTR2472&@# $494 $567 $642

30 36 24 0 TTR3036&@# $334 $384 $43430 42 30 0 TTR3042&@# $361 $415 $46930 48 36 0 TTR3048&@# $386 $444 $50130 54 42 0 TTR3054&@# $455 $523 $59130 60 48 0 TTR3060&@# $514 $590 $66730 72 60 0 TTR3072&@# $573 $658 $744

Laminate

Trapezoid Table Tops

W1

D1

W2cutout/grommet if applicable

55

(SIN 711-11)Modified Pentagon Table TopsOrdering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED. See below for quantities. (Stealth, Equilibrium,

Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 72”. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STANDARD LAMINATE


D1 D2 W1 INCLD. Part Number Suffix A Suffix L Suffix K

24 30 42 0 TMP3042&@# $361 $415 $46924 30 48 0 TMP3048&@# $386 $444 $50124 30 54 0 TMP3054&@# $455 $523 $59124 30 60 1 TMP3060&@# $514 $590 $66724 30 66 1 TMP3066&@# $589 $677 $76524 30 72 1 TMP3072&@# $573 $658 $744

Laminate

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

D1D2

W1

56

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK Standard Laminate – Knife Edge




STEP 3

STEP 1


STEP 2

(SIN 711-11)

Product Specifications: > Great care is taken on 2-piece tops to match laminate wood grains as close as possible given the limiations of pattern,

shape, laminate repeatability, and manufacturing tolerances. 3+ piece tops are not grain matched as most laminate sheets only allow for 2 pieces to match.

Ordering Information:> THX120 utilizes 6-post Zori base. THX60 may use any Enwork 4-post base. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Hexagon Conference Table Tops

STANDARD LAMINATE


A1 D1 W1 INCLD. Part Number Description Suffix A Suffix L Suffix K

30 52 60 0 THX60&@# 52” x 60” (30” Sides, seats 6) $642 $738 $83460 104 120 2 THX120&@# 104” x 120” (60” Sides, seats 12) $3140 $3626 $4100

Laminate

W1

A1

D1

W1

A1

D1

THX60 THX120

57

(SIN 711-11)

Notes

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

58

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge w/ Ply lookK Standard Laminate – Knife Edge*T Contour Laminate – Taper Edge*E Standard Laminate – 3mm Wood Edge P Standard Veneer – 3mm Wood Edge

*HalfMediaandHalfElipticalD1isalwaysaflatedge.HalfRoundW1isalwaysaflatedge.




(#) Contour Laminate Suffix List:G Natural MapleR Hayward CherryS Studio White MatrixV River CherryW Designer White

(#) Veneer Suffix List:D Maple (stained similar to Kensington Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

STEP 2

STEP 1

STANDARD LAMINATE CONTOUR STANDARD STANDARD LAMINATE LAMINATE VENEER

PVC PLY 3MM 3MM BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T Suffix E Suffix P Half-Round 24 48 - HR2448&# $325 $329 $422 $446 $717 $83830 60 - HR3060&# $466 $471 $605 $637 $1063 $1246

Half-Elliptical 48 48 - HRE48&# $502 $502 $648 $1283 $1407 $164560 60 - HRE60&# $580 $580 $746 n/a $1995 $2356

Half-Media 48 48 - HRM48&# $502 $502 $648 $1283 $1407 $164560 60 - HRM60&# $580 $580 $746 n/a $1995 $2356

Ordering Information:> ForHalf-Roundtopsusedinflipapplications,downsizethebaseonesize(e.g.24"x48"Half-Round would use an 18"D base).> HalfMediaandHalfElipticalD1isalwaysaflatedge.HalfRoundW1isalwaysaflatedge.> Braces not included. Add braces for spans of 54” or longer according to rules on page 23.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

W1

Half Round

D1

Half Eliptical

D1

W1

Half Media

D1

W1

Half-Round, Half-Elliptical, Half-Media Conference Table Tops

Laminate & Veneer

(SIN 711-11)

59

STANDARD LAMINATE CONTOUR STANDARD STANDARD LAMINATE LAMINATE VENEER

PVC PLY 3MM 3MM BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T Suffix E Suffix P Half-Round 24 48 - HR2448&# $325 $329 $422 $446 $717 $83830 60 - HR3060&# $466 $471 $605 $637 $1063 $1246

Half-Elliptical 48 48 - HRE48&# $502 $502 $648 $1283 $1407 $164560 60 - HRE60&# $580 $580 $746 n/a $1995 $2356

Half-Media 48 48 - HRM48&# $502 $502 $648 $1283 $1407 $164560 60 - HRM60&# $580 $580 $746 n/a $1995 $2356

Notes

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

60

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm Edge (all sides)L Standard Laminate – PVC Edge w/ Ply look (all sides)K Standard Laminate – Knife EdgeT Contour Laminate – Taper Edge





STEP 3

STEP 1

STEP 2(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Power/Data Cut-out, Centered +$37C Two Power/Data Cut-outs +$74X Other TBD

Ordering Information:> For applications which require Taper Edge to be handed, call customer service for quote.> This worksurface is not available for XTB Flexible Height Benching. > D1 is always 3mm edge.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STANDARD LAMINATE CONTOUR LAMINATE

BRACES 3MM EDGE PVC PLY EDGE KNIFE EDGE TAPER EDGE

D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T D-Top 24 48 - P2448&@# $315 $315 $407 $42724 60 1 P2460&@# $380 $380 $491 $51524 66 1 P2466&@# $394 $394 $507 $53324 72 1 P2472&@# $409 $409 $529 $554 30 48 - P3048&@# $456 $461 $592 $62430 60 1 P3060&@# $491 $496 $638 $67030 66 1 P3066&@# $522 $528 $678 $71530 72 2 P3072&@# $540 $546 $702 $73830 84 2 P3084&@# $673 $773 $874 $113430 96 2 P3096&@# $721 $806 $937 $1197

36 72 2 P3672&@# $771 $886 $985 $123836 78 2 P3678&@# $931 $1070 $1210 $191336 84 2 P3684&@# $931 $1070 $1199 $145436 96 2 P3696&@# $931 $1070 $1199 $1454

D-Top

W1

D1

Laminate

D-Top Table Tops (SIN 711-11)

61


BRACES 3MM EDGE PVC PLY EDGE KNIFE EDGE TAPER EDGE

D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T Arc D-Top 30 60 1 PAB3060&@# $491 $496 $638 $67030 66 1 PAB3066&@# $522 $528 $678 $71530 72 2 PAB3072&@# $540 $546 $702 $73830 84 2 PAB3084&@# $673 $673 $874 $113430 96 2 PAB3096&@# $721 $701 $937 $1197 36 72 2 PAB3672&@# $771 $886 $985 $123836 84 2 PAB3684&@# $931 $1070 $1199 $145436 96 2 PAB3696&@# $931 $1070 $1199 n/a

Arc D-Top

W1

D1

Laminate

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

62

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm Edge (all sides)L Standard Laminate – PVC Edge w/ Ply look (all sides)K Standard Laminate – Knife Edge T Contour Laminate – Taper EdgeE Standard Laminate – 3mm Wood Edge (all sides)P Standard Veneer – 3mm Wood Edge (all sides)





(#) Veneer Suffix List:D Maple (stained similar to Kensington Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10% Stain Match fee)

STEP 3

(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Power/Data Cut-out, Centered +$37X Other TBD

STEP 2

STEP 1 Ordering Information:> Support recommendation is 3 straight legs.> D1 is always a 3mm edge.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix K Suffix T

24 24 - - QR2424&@# $226 $226 $290 $30530 30 - - QR3030&@# $287 $287 $370 $389

Conference Quarter-Round Table Tops

Laminate & Veneer

(SIN 711-11)

63


3MM 3MM BRACES WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix E Suffix P

24 24 - - QR2424&@# $359 $41830 30 - - QR3030&@# $531 $623

Tip: Order conference rectangle worksurfaces on pages 34-37 for this application.

W1

D1

D1

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

64

(&) Finish and Edge Suffix List:A Standard Laminate – 3mm Edge (all sides)L Standard Laminate – PVC Edge w/ Ply look (all sides)E Standard Laminate – 3mm Wood Edge (all sides)P Standard Veneer – 3mm Wood Edge (all sides)






STEP 3

(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Power/Data Cut-out, Centered +$37X Other TBD

STEP 2

STEP 1

STANDARD LAMINATE STANDARD VENEER

PVC PLY 3MM BRACES 3MM EDGE EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix E Suffix P

24 72 - - ST242472&@# $479 $484 $1210 $143530 72 - - ST303072&@# $571 $576 $1434 $1706

Product Specifications: > 24" Teleconference Tops: D2 = 24". > 30" Teleconference Tops: D2 = 30".

Ordering Information:> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Tip: Order conference rectangle worksurfaces on pages 34-37 for this application.

Tip: Leg orientation (legs purchased separately)

D1 D1

D2

W1

Teleconference Table Tops

Laminate & Veneer

(SIN 711-11)

65

Notes STANDARD LAMINATE STANDARD VENEER

PVC PLY 3MM BRACES 3MM EDGE EDGE WOOD EDGE WOOD EDGE D1 W1 INCLD. Part Number Suffix A Suffix L Suffix E Suffix P

24 72 - - ST242472&@# $479 $484 $1210 $143530 72 - - ST303072&@# $571 $576 $1434 $1706

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

66

(&) Finish and Edge Suffix List:A Standard Laminate - 3mm EdgeB Back-Painted Glass D Back-Painted Glass (frosted) 6 KrystalCast® on Ply - Flat Ply EdgeM Designer White Solid Surface (Wilsonart) - 1” Flat EdgeJ **Quartz (Cambria) on MDF - 3mm EdgeY Statement Laminate Top - 1” Flat Ply EdgeZ Statement Veneer Top - 1” Flat Ply Edge

**30% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details.






STEP 3 - For Statement Ply and 3mm Edge Tops Only

(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Power/Data Cut-out, Centered (all size tops) +$37X Other TBD

STEP 2

STEP 1Product Specifications: > (see page 61)

Ordering Information:> BRACES ARE INCLUDED WITH TABLE TOPS IF REQUIRED.> There is a 30% upcharge for Luxury Cambria Quartz colors: Annica, Brittanicca, Clareanne, Ella,

Oakmoor, Queen Anne, Roxwell, and Whitecliff. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1

W1

(CD) Credenza Top

Credenza and File Tops

STANDARD WHITE WHITE BACK-PAINTED LAMINATE BACK-PAINTED GLASS (FROSTED) GLASS

3MM EDGE FLAT EDGE FLAT EDGE

D1 W1 Part Number Suffix A Suffix B Suffix D

Credenza Tops* 12.75 51.75** - CD1351&@ $199 $1253 $142020 36 - CD2036&@ $241 $1250 $142620 48 - CD2048&@ $283 $1623 $185720 60 - CD2060&@ $420 $2039 $233120 72 - CD2072&@ $452 $2501 $2852 24 60 - CD2460&@ $420 $2501 $285224 72 - CD2472&@ $452 $2896 $331824 84 - CD2484&@ $575 $3211 $364324 96 - CD2496&@ $604 $3211 $3643

**Tip: Used on Concurrence Monitor Wall. *Tip: MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops.


Laminate & Designer Finishes

(SIN 711-11)

67

Product Specifications:> 2-1/8” thick Designer Finish options become 1” thick on Credenza Tops.> MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops.

> Back-Painted Glass – 3/8”thick,annealed,flat-polishedlowiron.Brightwhiteasstandard. Any Benjamin Moore color available upon request. $2000 list custom color fee applies for orders of less than 250 sq. ft. There is also a 20% upcharge to each top's list price for custom colors. Actual depth of 60”D tops is 59” due to yield.

> KrystalCast® – Acrylic on MDF or birch ply is available in any Benjamin Moore color. Super White is by far the most popular. See www.KrystalCast.com for technical specs and care instructions.

> Solid Surface (Wilsonart) – Designer White as standard. See http://wilsonart.com/commercial/solid-surfaces/designs for additional finish/colorchoices.Pricevariesbyfinish/color,[email protected].> Quartz (Cambria) – Seewww.cambriausa.comforfinish/colorchoices.13/16"thick.Undersized1-1/8"knifeedge substrate painted black. Due to sheet size availability, 60"D (only) tops come in twice the quantity of pieces. (For example, a top that normally comes in 3 pieces will come in 6 pieces.> Birch Ply Edges –Edgeisclearcoatedwhenspecifiedwithlaminateandstained-to-matchwhensoldwithveneer. Actual width of 96"W is 95". Actual width of 192"W is 190" due to yield.

KRYSTALCAST® DESIGNER WHITE STATEMENT STATEMENT ON PLY SOLID SURFACE QUARTZ LAMINATE TOP W/ VENEER TOP W/ (WILSONART) (CAMBRIA) BIRCH PLY EDGE BIRCH PLY EDGE

FLAT PLY 1” FLAT FLAT 1” FLAT 1" FLAT EDGE EDGE EDGE EDGE* EDGE*

D1 W1 Part Number Suffix 6 Suffix M Suffix J Suffix Y Suffix Z Credenza Tops* 12.75 51.75** - CD1351&@# $1863 $2193 $1988 $595 $70020 36 - CD2036&@# $1863 $2250 $2196 $620 $73020 48 - CD2048&@# $2492 $2855 $2928 $802 $94420 60 - CD2060&@# $3106 $3459 $3660 $983 $115720 72 - CD2072&@# $3728 $4065 $4393 $1164 $1371 24 60 - CD2460&@# $3728 $3927 $4393 $1158 $136424 72 - CD2472&@# $4474 $4611 $5271 $1375 $161824 84 - CD2484&@# $4763 $4909 $5976 $1811 $205324 96 - CD2496&@# $4763 $4909 $5976 $1811 $2053

**Tip: Used on Concurrence Monitor Wall. *Tip: MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops.

(SIN 711-11) TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

68

Notes

69

Notes

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

70

Notes

71

Notes

TOPS

SUPPORT FURNITURE

ACCESSORIES

BASES

POWER DATA

TABL

ES S

TEP

1 - T

OP

S

72

Notes

73

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

2

Notes

74

(@) Segmentation Suffix List:N Non-Segmented Bases No ChargeS Segmented Bases +$312

Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segment-ed panels have grooves with aluminum trim.

STEP 1 Product Specifications: > Individual bases are 4.75” wide.> Base trim is clear anodized aluminum.

Ordering Information:> Bases include PDGR cable management.> Product is base and aluminum structural beam kit only. Table top and trough covers are specified separately> Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71.> Tops are ordered separately.> Concurrence bases ship partially assembled. > For number of bases required per table size and recommended base locations, see page 24-25. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have

no upcharge. Y Formica Non-Premium (includes $308

58, 43, MC, SP, and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates.

Z Pionite Non-Premium, Nevamar +$332 Non-Premium, Formica Premium (WR,

42, 77, 46, RD finishes), and Formica 459-90 Brite White whiteboard laminate.


(#) Veneer Suffix List:D Maple (stained similar to

Kensington Maple laminate)T Walnut (stained similar to

Ebony Recon laminate) 2 Walnut (stained similar to

Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to

Select Cherry laminate)X Stain Match (add a one-time +10%

$700 list Stain Match fee)

STEP 2

Segmented Panel Option

Non-Segmented Panel Option Part Number Description List Price (US$)

Laminate Concurrence Base and Beam Assemblies for 36”/42”D Tables LZTLA72@# Lam. Base Assembly for 36”/42”D x 72”W top $3553LZTLA84@# Lam. Base Assembly for 36”/42”D x 84”W top $3775LZTLA96@# Lam. Base Assembly for 36”/42”D x 96”W top $3775LZTLA108@# Lam. Base Assembly for 36”/42”D x 108”W top $3909LZTLA120@# Lam. Base Assembly for 36”/42”D x 120”W top $4351LZTLA132@# Lam. Base Assembly for 36”/42”D x 132”W top $4351LZTLA144@# Lam. Base Assembly for 36”/42”D x 144”W top $4351LZTLA156@# Lam. Base Assembly for 36”/42”D x 156”W top $4351LZTLA168@# Lam. Base Assembly for 36”/42”D x 168”W top $4351 LZTLA180@# Lam. Base Assembly for 36”/42”D x 180”W top $6158LZTLA192@# Lam. Base Assembly for 36”/42”D x 192”W top $7041LZTLA204@# Lam. Base Assembly for 36”/42”D x 204”W top $7041LZTLA216@# Lam. Base Assembly for 36”/42”D x 216”W top $7041LZTLA228@# Lam. Base Assembly for 36”/42”D x 228”W top $7041LZTLA240@# Lam. Base Assembly for 36”/42”D x 240”W top $7041

Laminate Concurrence Base and Beam Assemblies for 48”/54”D Tables LZTLB72@# Lam. Base Assembly for 48”/54”D x 72”W top $3689LZTLB84@# Lam. Base Assembly for 48”/54”D x 84”W top $3909LZTLB96@# Lam. Base Assembly for 48”/54”D x 96”W top $3909LZTLB108@# Lam. Base Assembly for 48”/54”D x 108”W top $3909LZTLB120@# Lam. Base Assembly for 48”/54”D x 120”W top $4351LZTLB132@# Lam. Base Assembly for 48”/54”D x 132”W top $4351LZTLB144@# Lam. Base Assembly for 48”/54”D x 144”W top $4351LZTLB156@# Lam. Base Assembly for 48”/54”D x 156”W top $4351LZTLB168@# Lam. Base Assembly for 48”/54”D x 168”W top $4351 LZTLB180@# Lam. Base Assembly for 48”/54”D x 180”W top $6158LZTLB192@# Lam. Base Assembly for 48”/54”D x 192”W top $7041LZTLB204@# Lam. Base Assembly for 48”/54”D x 204”W top $7041LZTLB216@# Lam. Base Assembly for 48”/54”D x 216”W top $7041LZTLB228@# Lam. Base Assembly for 48”/54”D x 228”W top $7041LZTLB240@# Lam. Base Assembly for 48”/54”D x 240”W top $7041

Concurrence™ - Conference Base Assemblies (36"D - 54"D Top)(SIN 711-11)

75

Concurrence™ - Conference Base Assemblies (36"D - 54"D Top)

Part Number Description List Price (US$)

Veneer Concurrence Base and Beam Assemblies for 36”/42”D Tables LZTVA72@# Veneer Base Assembly for 36”/42”D x 72”W top $5155LZTVA84@# Veneer Base Assembly for 36”/42”D x 84”W top $5376LZTVA96@# Veneer Base Assembly for 36”/42”D x 96”W top $5376LZTVA108@# Veneer Base Assembly for 36”/42”D x 108”W top $6197LZTVA120@# Veneer Base Assembly for 36”/42”D x 120”W top $6639LZTVA132@# Veneer Base Assembly for 36”/42”D x 132”W top $6639LZTVA144@# Veneer Base Assembly for 36”/42”D x 144”W top $6639LZTVA156@# Veneer Base Assembly for 36”/42”D x 156”W top $6639LZTVA168@# Veneer Base Assembly for 36”/42”D x 168”W top $6639 LZTVA180@# Veneer Base Assembly for 36”/42”D x 180”W top $8904LZTVA192@# Veneer Base Assembly for 36”/42”D x 192”W top $9787LZTVA204@# Veneer Base Assembly for 36”/42”D x 204”W top $9787LZTVA216@# Veneer Base Assembly for 36”/42”D x 216”W top $9787LZTVA228@# Veneer Base Assembly for 36”/42”D x 228”W top $9787LZTVA240@# Veneer Base Assembly for 36”/42”D x 240”W top $9787

Veneer Concurrence Base and Beam Assemblies for 48”/54”D Tables LZTVB72@# Veneer Base Assembly for 48”/54”D x 72”W top $5977LZTVB84@# Veneer Base Assembly for 48”/54”D x 84”W top $6197LZTVB96@# Veneer Base Assembly for 48”/54”D x 96”W top $6197LZTVB108@# Veneer Base Assembly for 48”/54”D x 108”W top $6197LZTVB120@# Veneer Base Assembly for 48”/54”D x 120”W top $6639LZTVB132@# Veneer Base Assembly for 48”/54”D x 132”W top $6639LZTVB144@# Veneer Base Assembly for 48”/54”D x 144”W top $6639LZTVB156@# Veneer Base Assembly for 48”/54”D x 156”W top $6639LZTVB168@# Veneer Base Assembly for 48”/54”D x 168”W top $6639 LZTVB180@# Veneer Base Assembly for 48”/54”D x 180”W top $8904LZTVB192@# Veneer Base Assembly for 48”/54”D x 192”W top $9787LZTVB204@# Veneer Base Assembly for 48”/54”D x 204”W top $9787LZTVB216@# Veneer Base Assembly for 48”/54”D x 216”W top $9787LZTVB228@# Veneer Base Assembly for 48”/54”D x 228”W top $9787LZTVB240@# Veneer Base Assembly for 48”/54”D x 240”W top $9787

TROUGH COVERSTrough covers are

avialable on page 71.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-11)

76

Product Specifications: > Individual bases are 4.75” wide.> Base trim is clear anodized aluminum.

Ordering Information:> Bases include PDGR cable management.> Product is base and aluminum structural beam kit only. Table top and trough covers are specified separately> Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71.> Tops are ordered separately.> Concurrence bases ship partially assembled. > For number of bases required per table size and recommended base locations, see page 24-25. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Laminate Concurrence Base and Beam Assemblies for 60”/66”D Tables LZTLD72@# Lam. Base Assembly for 60”/66”D x 72”W top $4716LZTLD84@# Lam. Base Assembly for 60”/66”D x 84”W top $4935LZTLD96@# Lam. Base Assembly for 60”/66”D x 96”W top $4935LZTLD108@# Lam. Base Assembly for 60”/66”D x 108”W top $4935LZTLD120@# Lam. Base Assembly for 60”/66”D x 120”W top $5377LZTLD132@# Lam. Base Assembly for 60”/66”D x 132”W top $5377LZTLD144@# Lam. Base Assembly for 60”/66”D x 144”W top $5377LZTLD156@# Lam. Base Assembly for 60”/66”D x 156”W top $5377LZTLD168@# Lam. Base Assembly for 60”/66”D x 168”W top $5377 LZTLD180@# Lam. Base Assembly for 60”/66”D x 180”W top $7699LZTLD192@# Lam. Base Assembly for 60”/66”D x 192”W top $8582LZTLD204@# Lam. Base Assembly for 60”/66”D x 204”W top $8582LZTLD216@# Lam. Base Assembly for 60”/66”D x 216”W top $8582LZTLD228@# Lam. Base Assembly for 60”/66”D x 228”W top $8582LZTLD240@# Lam. Base Assembly for 60”/66”D x 240”W top $8582

Laminate Concurrence Base and Beam Assemblies for 60”D Tables LZTLC72@# Lam. Base Assembly for 72”D x 72”W top $4716LZTLC84@# Lam. Base Assembly for 72”D x 84”W top $4935LZTLC96@# Lam. Base Assembly for 72”D x 96”W top $4935LZTLC108@# Lam. Base Assembly for 72”D x 108”W top $4935LZTLC120@# Lam. Base Assembly for 72”D x 120”W top $5377LZTLC132@# Lam. Base Assembly for 72”D x 132”W top $5377LZTLC144@# Lam. Base Assembly for 72”D x 144”W top $5377LZTLC156@# Lam. Base Assembly for 72”D x 156”W top $5377LZTLC168@# Lam. Base Assembly for 72”D x 168”W top $5377 LZTLC180@# Lam. Base Assembly for 72”D x 180”W top $7699LZTLC192@# Lam. Base Assembly for 72”D x 192”W top $8582LZTLC204@# Lam. Base Assembly for 72”D x 204”W top $8582LZTLC216@# Lam. Base Assembly for 72”D x 216”W top $8582LZTLC228@# Lam. Base Assembly for 72”D x 228”W top $8582LZTLC240@# Lam. Base Assembly for 72”D x 240”W top $8582

Concurrence - Conference Base Assemblies (60"D - 72"D Tops)


Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segmented panels have grooves with aluminum trim.

STEP 1













STEP 2


Non-Segmented Panel Option

(SIN 711-11)

77

Concurrence - Conference Base Assemblies (60"D - 72"D Tops)


Veneer Concurrence Base and Beam Assemblies for 54”D Tables LZTVD72@# Veneer Base Assembly for 60”/66”D x 72”W top $7003LZTVD84@# Veneer Base Assembly for 60”/66”D x 84”W top $7223LZTVD96@# Veneer Base Assembly for 60”/66”D x 96”W top $7223LZTVD108@# Veneer Base Assembly for 60”/66”D x 108”W top $7223LZTVD120@# Veneer Base Assembly for 60”/66”D x 120”W top $7665LZTVD132@# Veneer Base Assembly for 60”/66”D x 132”W top $7665LZTVD144@# Veneer Base Assembly for 60”/66”D x 144”W top $7665LZTVD156@# Veneer Base Assembly for 60”/66”D x 156”W top $7665LZTVD168@# Veneer Base Assembly for 60”/66”D x 168”W top $7665 LZTVD180@# Veneer Base Assembly for 60”/66”D x 180”W top $10,673LZTVD192@# Veneer Base Assembly for 60”/66”D x 192”W top $11,556LZTVD204@# Veneer Base Assembly for 60”/66”D x 204”W top $11,556LZTVD216@# Veneer Base Assembly for 60”/66”D x 216”W top $11,556LZTVD228@# Veneer Base Assembly for 60”/66”D x 228”W top $11,556LZTVD240@# Veneer Base Assembly for 60”/66”D x 240”W top $11,556

Veneer Concurrence Base and Beam Assemblies for 60”D Tables LZTVC72@# Veneer Base Assembly for 72”D x 72”W top $7003LZTVC84@# Veneer Base Assembly for 72”D x 84”W top $7223LZTVC96@# Veneer Base Assembly for 72”D x 96”W top $7223LZTVC108@# Veneer Base Assembly for 72”D x 108”W top $7223LZTVC120@# Veneer Base Assembly for 72”D x 120”W top $7665LZTVC132@# Veneer Base Assembly for 72”D x 132”W top $7665LZTVC144@# Veneer Base Assembly for 72”D x 144”W top $7665LZTVC156@# Veneer Base Assembly for 72”D x 156”W top $7665LZTVC168@# Veneer Base Assembly for 72”D x 168”W top $7665 LZTVC180@# Veneer Base Assembly for 72”D x 180”W top $10,673LZTVC192@# Veneer Base Assembly for 72”D x 192”W top $11,556LZTVC204@# Veneer Base Assembly for 72”D x 204”W top $11,556LZTVC216@# Veneer Base Assembly for 72”D x 216”W top $11,556LZTVC228@# Veneer Base Assembly for 72”D x 228”W top $11,556LZTVC240@# Veneer Base Assembly for 72”D x 240”W top $11,556

Concurrence Sliding Trough Covers* (See chart for maximum ordering quantities) LZLACP18 One trough cover for use with bases for 36”/42”D tables, silver $82LZLACP24 One trough cover for use with bases for 48/54””D tables, silver $89LZLACP30 One trough cover for use with bases for 60”/66”D tables, silver $106LZLACP36 One trough cover for use with bases for 72”D tables, silver $122

*Concurrence Sliding Trough covers for

concealing Power/Data under Concurrence conference tables:

(Trough covers are 20"W)

Max # of Trough Covers

0 1 1 2 3 3 4 4 5 6 6 6 6 8 8

Top Width

728496

108120132144156168180192204216228240

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-11)

78


5" Laminate Concurrence Conference Bases w/ Levelers - End Application LZBE518@# Laminate Base, 18” x 5”, for 36/42”D table $1443LZBE524@# Laminate Base, 24” x 5”, for 48”/54”D table $1550LZBE530@# Laminate Base, 30” x 5”, for 60”/66”D table $2058LZBE536@# Laminate Base, 36” x 5”, for 72”D table $2058

12" Laminate Concurrence Conference Base w/ Access Door & Levelers - End Application LZBED1218@# Laminate Base, 18” x 12”, for 36/42”D table $1978LZBED1224@# Laminate Base, 24” x 12”, for 48”/54”D table $2116LZBED1230@# Laminate Base, 30” x 12”, for 60”/66”D table $2645LZBED1236@# Laminate Base, 36” x 12”, for 72”D table $2645

5" Laminate Concurrence Conference Base w/ Levelers - Middle ApplicationLZBM518@# Laminate Base, 18” x 5”, for 36/42”D table $1443LZBM524@# Laminate Base, 24” x 5”, for 48”/54”D table $1550LZBM530@# Laminate Base, 30” x 5”, for 60”/66”D table $2058LZBM536@# Laminate Base, 36” x 5”, for 72”D table $2058

12" Laminate Concurrence Conference Base w/ Access Door & Levelers - Middle Application LZBMD1218@# Laminate Base, 18” x 12”, for 36/42”D table $1978LZBMD1224@# Laminate Base, 24” x 12”, for 48”/54”D table $2116LZBMD1230@# Laminate Base, 30” x 12”, for 60”/66”D table $2645LZBMD1236@# Laminate Base, 36” x 12”, for 72”D table $2645

Ordering Information:> Bases must be connected with structural beams, ordered separately (page 73). > End Application bases should be inset 24" from end of table top. > Bases must be same depth (18", 24", 30", or 36"). 5"W and 12"W can be used under the same table. > Use 12" base when power/data in table top is directly over the base.> Two bases required for tables up to 168". Three bases required for tables 180"-240". > Where required, the third "center application" base must be centered (+/- 12") under the table.> Optional bases can be added for cable management (e.g. when a power/data unit or the floor power

monument is in the center of a two base table).> Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71.> Tops are ordered separately.> Concurrence bases ship assembled. > For number of bases required per table size and recommended base locations, see page 24-25. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segmented panels have grooves with aluminum trim.

STEP 1













STEP 2



Concurrence "Build-Your-Own" Conference Table Bases & Beam Kits(SIN 711-11)

79

Concurrence "Build-Your-Own" Conference Table Bases & Beam Kits


5" Veneer Concurrence Conference Base w/ Levelers - End Application LZVBE518@# Veneer Base, 18” x 5”, for 36/42”D table $2250LZVBE524@# Veneer Base, 24” x 5”, for 48”/54”D table $2699LZVBE530@# Veneer Base, 30” x 5”, for 60”/66”D table $3194LZVBE536@# Veneer Base, 36” x 5”, for 72”D table $3194 12" Veneer Concurrence Conference Base w/ Access Door & Levelers - End Application LZVBED1218@# Veneer Base, 18” x 12”, for 36/42”D table $2892LZVBED1224@# Veneer Base, 24” x 12”, for 48”/54”D table $3341LZVBED1230@# Veneer Base, 30” x 12”, for 60”/66”D table $3835LZVBED1236@# Veneer Base, 36” x 12”, for 72”D table $3835 5" Veneer Concurrence Conference Base w/ Levelers - Middle Application LZVBM518@# Veneer Base, 18” x 5”, for 36/42”D table $2250LZVBM524@# Veneer Base, 24” x 5”, for 48”/54”D table $2699LZVBM530@# Veneer Base, 30” x 5”, for 60”/66”D table $3194LZVBM536@# Veneer Base, 36” x 5”, for 72”D table $3194 12" Veneer Concurrence Conference Base w/ Access Door & Levelers - Middle Application LZVBMD1218@# Veneer Base, 18” x 12”, for 36/42”D table $2892LZVBMD1224@# Veneer Base, 24” x 12”, for 48”/54”D table $3341LZVBMD1230@# Veneer Base, 30” x 12”, for 60”/66”D table $3835LZVBMD1236@# Veneer Base, 36” x 12”, for 72”D table $3835

Structural Aluminum Beams for use w/ Concurrence Conference BasesLZBK72 Beam Kit for 72”W table (includes two beams) $694LZBK84 Beam Kit for 84”W table (includes two beams) $908LZBK96 Beam Kit for 96”W table (includes two beams) $908LZBK108 Beam Kit for 108”W table (includes two beams) $908LZBK120 Beam Kit for 120”W table (includes two beams) $1283LZBK132 Beam Kit for 132”W table (includes two beams) $1283LZBK144 Beam Kit for 144”W table (includes two beams) $1283LZBK156 Beam Kit for 156”W table (includes two beams) $1283LZBK168 Beam Kit for 168”W table (includes two beams) $1283 LZBK180 Beam Kit for 180”W table (includes four beams) $1603LZBK192 Beam Kit for 192”W table (includes four beams) $2437LZBK204 Beam Kit for 204”W table (includes four beams) $2437LZBK216 Beam Kit for 216”W table (includes four beams) $2437LZBK228 Beam Kit for 228”W table (includes four beams) $2437LZBK240 Beam Kit for 240”W table (includes four beams) $2437

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-11)

80

Ordering Information:> Includes one monitor mount for monitors up to 55”. Two monitors up to 40” may be mounted by

ordering an alternate mount kit on page 78.> Sliding trough covers conceal technology components, cables and wiring under worksurface.

Mast includes access holes for monitor cables. > Includes worksurface.> Ellora VS (video sharing) technology unit ordered separately. See page 77.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STANDARD LAMINATE

3MM EDGE KNIFE EDGE

W D H Part Number Description Suffix A Suffix K

Concurrence VS (Video Sharing) Tables - Seated Height (29")60 54 29 LZAN2960^&@# VS Table, Seated, 60”W $8957 $9277 72 54 29 LZAN2972^&@# VS Table, Seated, 72”W $9105 $9426 84 54 29 LZAN2984^&@# VS Table, Seated, 84”W $9423 $9743 96 54 29 LZAN2996^&@# VS Table, Seated, 96”W $10,081 $10,402 120 54 29 LZAN29120^&@# VS Table, Seated, 120”W $10,844 $11,378 144 54 29 LZAN29144^&@# VS Table, Seated, 144”W $11,195 $11,730

Concurrence VS (Video Sharing) Tables - Seated Height (29")60 54 29 LZAS2960^&@# VS Table, Seated, Segmented, 60”W $9290 $9611 72 54 29 LZAS2972^&@# VS Table, Seated, Segmented, 72”W $9439 $9760 84 54 29 LZAS2984^&@# VS Table, Seated, Segmented, 84”W $9757 $10,077 96 54 29 LZAS2996^&@# VS Table, Seated, Segmented, 96”W $10,415 $10,735 120 54 29 LZAS29120^&@# VS Table, Seated, Segmented, 120”W $11,177 $11,712 144 54 29 LZAS29144^&@# VS Table, Seated, Segmented, 144”W $11,529 $12,064

Concurrence VS (Video Sharing) Tables - Standing Height (42")60 54 42 LZAN4260^&@# VS Table, Standing, 60”W $9401 $9722 72 54 42 LZAN4272^&@# VS Table, Standing, 72”W $9550 $9871 84 54 42 LZAN4284^&@# VS Table, Standing, 84”W $9867 $10,188 96 54 42 LZAN4296^&@# VS Table, Standing, 96”W $10,526 $10,847 120 54 42 LZAN42120^&@# VS Table, Standing, 120”W $11,289 $11,824 Concurrence VS (Video Sharing) Tables - Standing Height (42") 60 54 42 LZAS4260^&@# VS Table, Standing, Segmented, 60”W $9846 $10,167 72 54 42 LZAS4272^&@# VS Table, Standing, Segmented, 72”W $9995 $10,315 84 54 42 LZAS4284^&@# VS Table, Standing, Segmented, 84”W $10,312 $10,632 96 54 42 LZAS4296^&@# VS Table, Standing, Segmented, 96”W $10,970 $11,292 120 54 42 LZAS42120^&@# VS Table, Standing, Segmented, 120”W $11,733 $12,268

Concurrence VS (Video Sharing) Tables (SIN 711-11)

(^) Shape Suffix List:STEP 1

(&) Finish and Edge Suffix List:A Standard Laminate - 3mm EdgeK Standard Laminate - Knife Edge

STEP 2

(@) Cut-Out Suffix List:N No Cut-out A Cut-out for PDEVC222 (2 user, single sided), Over Panel BaseB Cut-out for PDEVC314 (4 user, single sided), Over Panel BaseC Cut-out for PDEVC444, PDEVD444

(4 user, double sided), CenteredD Cut-out for PDEVC666, PDEVD666

(6 user, double sided), CenteredE Cut-out for PDEVC444, PDEVD444

(4 user, double sided), Over Panel BaseF Cut-out for PDEVC666, PDEVD666

(6 user, double sided), Over Panel BaseX Other

Tip: Technology sold separately. See page 91.

STEP 3

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-P remium laminates (-38, -60). +15% Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +20% MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +25%



STEP 4

(A) Arc Rectagle

W

D

(B) Half Boat

D

W

(C) Angled

D

W

81

STANDARD LAMINATE

3MM EDGE KNIFE EDGE

W D H Part Number Description Suffix A Suffix K

Concurrence VS (Video Sharing) Tables - Seated Height (29")60 54 29 LZAN2960^&@# VS Table, Seated, 60”W $8957 $9277 72 54 29 LZAN2972^&@# VS Table, Seated, 72”W $9105 $9426 84 54 29 LZAN2984^&@# VS Table, Seated, 84”W $9423 $9743 96 54 29 LZAN2996^&@# VS Table, Seated, 96”W $10,081 $10,402 120 54 29 LZAN29120^&@# VS Table, Seated, 120”W $10,844 $11,378 144 54 29 LZAN29144^&@# VS Table, Seated, 144”W $11,195 $11,730

Concurrence VS (Video Sharing) Tables - Seated Height (29")60 54 29 LZAS2960^&@# VS Table, Seated, Segmented, 60”W $9290 $9611 72 54 29 LZAS2972^&@# VS Table, Seated, Segmented, 72”W $9439 $9760 84 54 29 LZAS2984^&@# VS Table, Seated, Segmented, 84”W $9757 $10,077 96 54 29 LZAS2996^&@# VS Table, Seated, Segmented, 96”W $10,415 $10,735 120 54 29 LZAS29120^&@# VS Table, Seated, Segmented, 120”W $11,177 $11,712 144 54 29 LZAS29144^&@# VS Table, Seated, Segmented, 144”W $11,529 $12,064

Concurrence VS (Video Sharing) Tables - Standing Height (42")60 54 42 LZAN4260^&@# VS Table, Standing, 60”W $9401 $9722 72 54 42 LZAN4272^&@# VS Table, Standing, 72”W $9550 $9871 84 54 42 LZAN4284^&@# VS Table, Standing, 84”W $9867 $10,188 96 54 42 LZAN4296^&@# VS Table, Standing, 96”W $10,526 $10,847 120 54 42 LZAN42120^&@# VS Table, Standing, 120”W $11,289 $11,824 Concurrence VS (Video Sharing) Tables - Standing Height (42") 60 54 42 LZAS4260^&@# VS Table, Standing, Segmented, 60”W $9846 $10,167 72 54 42 LZAS4272^&@# VS Table, Standing, Segmented, 72”W $9995 $10,315 84 54 42 LZAS4284^&@# VS Table, Standing, Segmented, 84”W $10,312 $10,632 96 54 42 LZAS4296^&@# VS Table, Standing, Segmented, 96”W $10,970 $11,292 120 54 42 LZAS42120^&@# VS Table, Standing, Segmented, 120”W $11,733 $12,268


Ordering Information: Panels below the worksurface on mast and on both sides of the panel base are segmented. Panels above the worksurface on the mast and the entire back side of the mast are not segmented.


COORDINATING FURNITURECabinets for VS Tables are

avialable on page 76.

Pixley Soft Seating and Lounge VS Tables available

on pages 364-365. SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-11)

82

Cabinet Ordering Information:> VS Table Cabinets have a finished top and fit under VS table tops against monitor mast.> Includes lock and levelers.> Cabinets include adjustable shelves.> A freight fee of $100 is assessed on orders less than $1000 net. See page 13.


4-Door Cabinets for VS (Video Sharing) Tables – Seated Height LZACAL#* Laminate, 54”W x 23”H x 13”D $2510

4-Door Cabinets for VS (Video Sharing) Tables – Standing Height LZACBL#* Laminate, 54”W x 36”H x 13”D $3184

Concurrence VS (Video Sharing) Cabinets (SIN 711-11)

(*) Pull Suffix List:STEP 2

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium

(WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium

(-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.


STEP 1

(A) Arc (B) Bar

83

Part # # Users Cut-Out Size Description List Price (US$)

Ellora Single Sided VS (Video Share) Technology for 1 Monitor - HDMI, 6' power cordPDEVC222A 2 5” x 11” 2 power/2 data openings/2 Video Sharing HDMI cords, Clear Anodized Alum. $5496PDEVC222R 2 5” x 11” 2 power/2 data openings/2 Video Sharing HDMI cords, Black Anodized Alum. $5711PDEVC314A 4 5” x 14” 3 power/1 data opening/4 Video Sharing HDMI cords, Clear Anodized Alum. $8152PDEVC314R 4 5” x 14” 3 power/1 data opening/4 Video Sharing HDMI cords, Black Anodized Alum. $8474 Ellora Double-Sided VS (Video Share) Technology for 1 Monitor - HDMI, two 6' power cords PDEVC444A 4 9.81” x 11” 4 power/4 data openings/4 Video Sharing HDMI cords, Clear Anodized Alum. $8348PDEVC444R 4 9.81” x 11” 4 power/4 data openings/4 Video Sharing HDMI cords, Black Anodized Alum. $8730PDEVC666A 6 9.81” x 14” 6 power/6 data openings/6 Video Sharing HDMI cords, Clear Anodized Alum. $13,121PDEVC666R 6 9.81” x 14” 6 power/6 data openings/6 Video Sharing HDMI cords, Black Anodized Alum. $13,553 Ellora Double-Sided VS (Video Share) Technology for 2 Monitors - HDMI, two 6' power cords PDEVD444A 4 9.81” x 11” 4 power/4 data openings/4 Video Sharing HDMI cords, Clear Anodized Alum. $10,333PDEVD444R 4 9.81” x 11” 4 power/4 data openings/4 Video Sharing HDMI cords, Black Anodized Alum. $10,697PDEVD666A 6 9.81” x 14” 6 power/6 data openings/6 Video Sharing HDMI cords, Clear Anodized Alum. $13,333PDEVD666R 6 9.81” x 14” 6 power/6 data openings/6 Video Sharing HDMI cords, Black Anodized Alum. $13,744 Tip: VS Technology for 2 monitors contains 2 control boxes. Half the “Show Me” cables will control one monitor and the other half control another.

Video Sharing Power Data Ordering Information:> Ellora VS (Video Sharing) Technology provides collaboration and interaction by allowing users to “take control”

of flat screen displays by pressing a button on the “show me” HDMI cord.> Two monitor applications come with 2 control boxes. “Show Me” cables are dedicated to one of two monitors.

Half the “Show Me” cables will display on one monitor while the other half will display on the second monitor.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Concurrence VS (Video Sharing) Power Data Units

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-2)

84


Concurrence Monitor Walls - Wall Mount with 4-Drawer Cabinet 54”W x 41”H x 15.5”DLZMLN5441*# Laminate Monitor Wall - Wall Mount w/4-Drawer Cabinet $5553

Concurrence Monitor Wall - Wall Mount with 4-Door Cabinet, 54”W x 72”H x 15.5”DLZMLC5472*# Laminate Monitor Wall - Wall Mount with 4-Door Cabinet $6762

Concurrence Monitor Wall - Freestanding On Levelers w/ 4-Door Cabinet, 54"W x 72"H x 15.5"DLZMLD5472*# Laminate Monitor Wall - Freestanding $6762

Tip: Freestanding Monitor Wall must be positioned with back against wall.

Monitor Mounting Bracket for two Monitors on VS Tables and Monitor WallLZMMB Bracket for two monitor application $480

Tip: Holds up to two 40” monitors.

Ordering Information:> Includes one monitor mount for most monitors up to 55”. Two monitors up to 40” may be mounted by

ordering an alternate mount kit below.> Includes lock and levelers.> Monitors ordered separately. > 4-door cabinets include adjustable shelves.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Concurrence Monitor Walls & Monitors (SIN 711-11)

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium




STEP 2

(*) Pull Suffix List:STEP 1

(A) Arc (B) Bar

85

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

86

Product Specifications:> For Square bases, vertical column is square.

Ordering Information:> For shorter heights put "X" in front of the part number and add $54 list. For taller heights, put "XX" in front

of the part number and add $68 list. > For number of bases required per table size and recommended base locations, see page 24-25. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneU Chrome (LDFA, LDFB, LDGA, +$495 LDFAF, LDFBF, LDGAF)*V Chrome (LDFC, LDGB, LDFCF, +$725 LDGBF)*W Arctic WhiteZ Other

*Tip: Chrome is not available on Square bases,LDFDF, LDFD, and Disc Bases with power data top plate.

Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 1


Low Profile Disc Bases, No Levelers – Desk/Dining Height (27.75’’ Tall) LDFAF^ Disc Base (17” diameter), for 24”- 36” round or 24”- 30” square top $520LDFBF^ Disc Base (23” diameter), for 42” round or 36” square top $592LDFCF^ Disc Base (27” diameter), for 48” round or 42” square top $713LDFDF^ Disc Base (32” diameter), for 54” - 60” round or 48” square top $1608

Low Profile Disc Bases, No Levelers – Bar Height (40.75’’ Tall) LDGAF^ Disc Base, (23” diameter), Bar Height, for 24”-36” round or 24”-30” square top $675LDGBF^ Disc Base (27” diameter), Bar Height, for 42” round or 36” square top $817

Steel Disc Bases with Levelers – Desk/Dining Height (28.25” Tall) LDFA^ Disc Base (17” diameter) for 24”- 36” round or 24”- 30” square top $632LDFB^ Disc Base (23” diameter) for 42” round or 36” square top $686LDFC^ Disc Base (27” diameter) for 48” round or 42” square top $823LDFD^ Disc Base (32” diameter) for 54”- 60” round or 48” square top $1709

Steel Disc Bases with Levelers – Bar Height (41.25’’ Tall) LDGA^ Disc Base (23” diameter), Bar Height, for 24”-36” round or 24”-30” square top $769LDGB^ Disc Base (27” diameter), Bar Height, for 42” round or 36” square top $905

Low Profile Square Bases with Levelers - Desk/Dining Height (27.75” Tall) LDSQ1A^ Flat Steel Square Base (17”) for 24”- 36” round or 24”- 30” square top $721LDSQ1B^ Flat Steel Square Base (22”) for 42” round or 36” square top $773LDSQ1C^ Flat Steel Square Base (27”) for 48” round or 42” square top $1009

Low Profile Square Bases with Levelers - Bar Height (40.75” Tall) LDSQ2A^ Flat Steel Square Base (17”), Bar Height, for 24”- 36” round or 24”- 30” square tops $858LDSQ2B^ Flat Steel Square Base (22”), Bar Height, for 42” round or 36”- 42” square tops $1057

Disc and Square Bases (SIN 711-11)

87

Ordering Information: > Special Top Plate allows room for Power/Data in center of top.> Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units.> Bases with Power/Data Top Plate include hole in side of leg near the bottom for cable management.> Disc bases with Power/Data Top Plate not available in chrome. > For number of bases required per table size and recommended base locations, see page 24-25. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Flat Steel Disc Bases, No Levelers, with Power/Data Top Plate – Desk/Dining Height (27.75’’ Tall) LD3FAF^ Disc Base (17” diameter), P/D Top Plate, for 24”- 36” round or 24”- 30” square top $651LD3FBF^ Disc Base (23” diameter), P/D Top Plate, for 42” round or 36” square top $723LD3FCF^ Disc Base (27” diameter), P/D Top Plate, for 48” round or 42” square top $844

Flat Steel Disc Bases, No Levelers, with Power/Data Top Plate – Bar Height (40.75’’ Tall) LD3GAF^ Disc Base (23” diameter), P/D Top Plate, for 24”-36” round or 24”-30” square top $806LD3GBF^ Disc Base (27” diameter), P/D Top Plate, for 42” round or 36” square top $947

Steel Disc Bases, with Levelers and Power/Data Top Plate – Desk/Dining Height (28.25” Tall) LD3FA^ Disc Base (17” diameter), P/D Top Plate, for 24”- 36” round or 24”- 30” square top $764LD3FB^ Disc Base (23” diameter), P/D Top Plate, for 42” round or 36” square top $817LD3FC^ Disc Base (27” diameter), P/D Top Plate, for 48” round or 42” square top $955LD3FD^ DIsc Base (32” diameter), P/D Top Plate, for 54”-60” round or 48” square top $2523

Tip: Flip-n-Go Power/Data units and Ellora Double-sided units with 6 power or 8 power will not fit the 32” diameter Disc Base.

Steel Disc Bases, with Levelers and Power/Data Top Plate – Bar Height (41.25’’ Tall) LD3GA^ Disc Base (23” diameter), P/D Top Plate, for 24”-36” round or 24”-30” square top $899LD3GB^ Disc Base (27” diameter), P/D Top Plate, for 42” round or 36” square top $1036

Disc Bases w/ Power Data Top Plate

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

CO

NC

UR

REN

CE

(SIN 711-11)

88

Notes

89

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2

Notes

90

Notes

91

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2

Notes

92

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium +35%

laminates (-38, -60)Y Formica Non-Premium (includes +45% 58, 43, MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non- Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.


(#) Veneer Suffix List:D Maple (stained similar to Kensington

Maple laminate)T Walnut (stained similar to Ebony

Recon laminate) 2 Walnut (stained similar to Pinnacle

Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select

Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

STEP 4

(&&) Material & Aluminum Trim Suffix ListLN Laminate Base without Aluminum TrimLA Laminate Base with Aluminum TrimVN Veneer Base without Aluminum TrimVA Veneer Base with Aluminum Trim

STEP 1

(@) Base Width Suffix ListW 6” Base Width L 10” Base Width **NEW**

STEP 2

(^) Trough Depth Suffix ListE 8” Trough Height P 12” Trough Height **NEW FOR USE WITH CABLE RETRACTORS

(customer supplied)**

STEP 3

Product Specifications:> Base is 27.75”H.> Aluminum trim is 1-1/4” wide. > Interior dimension of trough is 10.5”D x 7.25” or 11.25”H. Interior dimension of trough with

aluminum trim is 10.5”D x 7” or 11.25”H.

Ordering Information:> All Bases in Base Kit include 1 removable door and levelers.> Trough includes cable grippers for cable retention.> Trough includes removable bottom panel.> Braces are not required on tables with the Panel Base Kit.> Door kits for top access to trough are located on page 110.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Material & Aluminum Trim Lam. w/ Veneer w/ Lam. Alum. trim Veneer Alum. trimPart Number Description Suffix LN Suffix LA Suffix VN Suffix VA

Foundation Panel Base and Trough Assemblies for 48”/54”D Boat/Capsule/Ellipse Tables FDT4872&&@^# Panel Base Kit for 48”/54”D x 72”W Boat/Cap./Ell. Top $1529 $2097 $3987 $4161FDT4884&&@^# Panel Base Kit for 48”/54”D x 84”W Boat/Cap./Ell. Top $1529 $2097 $4292 $4446FDT4896&&@^# Panel Base Kit for 48”/54”D x 96”W Boat/Cap./Ell. Top $1529 $2097 $4601 $4730

FDT48108&&@^# Panel Base Kit for 48”/54”D x 108”W Boat/Cap./Ell. Top $2652 $3588 $6647 $6906FDT48120&&@^# Panel Base Kit for 48”/54”D x 120”W Boat/Cap./Ell. Top $2652 $3588 $6953 $7193FDT48132&&@^# Panel Base Kit for 48”/54”D x 132”W Boat/Cap./Ell. Top $2652 $3588 $7256 $7477FDT48144&&@^# Panel Base Kit for 48”/54”D x 144”W Boat/Cap./Ell. Top $2652 $3588 $7571 $7761FDT48156&&@^# Panel Base Kit for 48”/54”D x 156”W Boat/Cap. Top $2652 $3588 $7874 $8050FDT48168&&@^# Panel Base Kit for 48”/54”D x 168”W Boat/Cap. Top $2652 $3588 $8188 $8337FDT48180&&@^# Panel Base Kit for 48”/54”D x 180”W Boat/Cap. Top $2652 $3588 $8494 $8624FDT48192&&@^# Panel Base Kit for 48”/54”D x 192”W Boat/Cap. Top $2652 $3588 $8795 $8908 FDT48204&&@^# Panel Base Kit for 48”/54”D x 204”W Boat/Cap. Top $3765 $5788 $10,996 $11,226FDT48216&&@^# Panel Base Kit for 48”/54”D x 216”W Boat/Cap. Top $3765 $5788 $11,300 $11,511FDT48228&&@^# Panel Base Kit for 48”/54”D x 228”W Boat/Cap. Top $3765 $5788 $11,619 $11,799FDT48240&&@^# Panel Base Kit for 48”/54”D x 240”W Boat/Cap. Top $3765 $5788 $11,924 $12,084

Foundation Panel Base and Trough Assemblies for 60”/66”D Boat/Capsule/Ellipse Tables FDT6072&&@^# Panel Base Kit for 60”/66”D x 72”W Boat/Cap./Ell. Top $1696 $2261 $4452 $4560FDT6084&&@^# Panel Base Kit for 60”/66”D x 84”W Boat/Cap./Ell. Top $1696 $2261 $4757 $4847FDT6096&&@^# Panel Base Kit for 60”/66”Dx 96”W Boat/Cap./Ell. Top $1696 $2261 $5066 $5131 FDT60108&&@^# Panel Base Kit for 60”/66”D x 108”W Boat/Cap./Ell. Top $3106 $4033 $7526 $7717FDT60120&&@^# Panel Base Kit for 60”/66”D x 120”W Boat/Cap./Ell. Top $3106 $4033 $7830 $8003FDT60132&&@^# Panel Base Kit for 60”/66”D x 132”W Boat/Cap./Ell. Top $3106 $4033 $8134 $8288FDT60144&&@^# Panel Base Kit for 60”/66”D x 144”W Boat/Cap./Ell. Top $3106 $4033 $8447 $8572FDT60156&&@^# Panel Base Kit for 60”/66”D x 156”W Boat/Cap. Top $3106 $4033 $8753 $8862FDT60168&&@^# Panel Base Kit for 60”/66”D x 168”W Boat/Cap. Top $3106 $4033 $9067 $9150FDT60180&&@^# Panel Base Kit for 60”/66”D x 180”W Boat/Cap. Top $3106 $4033 $9372 $9435FDT60192&&@^# Panel Base Kit for 60”/66”D x 192”W Boat/Cap. Top $3106 $4033 $9667 $9718 FDT60204&&@^# Panel Base Kit for 60”/66”D x 204”W Boat/Cap. Top $4499 $5788 $12,288 $12,449FDT60216&&@^# Panel Base Kit for 60”/66”D x 216”W Boat/Cap. Top $4499 $5788 $12,591 $12,734FDT60228&&@^# Panel Base Kit for 60”/66”D x 228”W Boat/Cap. Top $4499 $5788 $12,910 $13,021FDT60240&&@^# Panel Base Kit for 60”/66”D x 240”W Boat/Cap. Top $4499 $5788 $13,214 $13,306

72”-96”W 108”-192”W 204”-240”W

(SIN 711-11)

Foundation™ - Base Assemblies for Boat/Capsule/Ellipse Tops

93

COORDINATING FURNITURESee pages 178-180

for coordinating Foundation furniture.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Foundation™ - Base Assemblies for Boat/Capsule/Ellipse Tops

Notes

94

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium +35%

laminates (-38, -60)Y Formica Non-Premium (includes +45% 58, 43, MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non- Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.




Recon laminate) 2 Walnut (stained similar to Pinnacle

Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select

Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

STEP 4

(&&) Material & Aluminum Trim Suffix ListLN Laminate Base without Aluminum TrimLA Laminate Base with Aluminum TrimVN Veneer Base without Aluminum TrimVA Veneer Base with Aluminum Trim

STEP 1

(@) Base Width Suffix ListW 6” Base Width L 10” Base Width **NEW**

STEP 2

(^) Trough Depth Suffix ListE 8” Trough Height P 12” Trough Height **NEW FOR USE WITH CABLE RETRACTORS

(customer supplied)**

STEP 3

Product Specifications:> Base is 27.75”H.> Aluminum trim is 1-1/4” wide. > Interior dimension of trough is 10.5”D x 7.25” or 11.25”H. Interior dimension of trough with

aluminum trim is 10.5”D x 7” or 11.25”H.

Ordering Information:> All Bases in Base Kit include 1 removable door and levelers.> Trough includes cable grippers for cable retention.> Trough includes removable bottom panel.> Braces are not required on tables with the Panel Base Kit.> Door kits for top access to trough are located on page 110.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Foundation Panel Base and Trough Assemblies for 36”/42”D Rectangle/Rounded Rectangle Tables FDU3672&&@^# Panel Base Kit for 36”/42”D x 72”W Rect./Rounded Rect. $1696 $2261 $4452 $4560FDU3684&&@^# Panel Base Kit for 36”/42”D x 84”W Rect./Rounded Rect. $1696 $2261 $4757 $4847FDU3696&&@^# Panel Base Kit for 36”/42”D x 96”W Rect./Rounded Rect. $1696 $2261 $5066 $5131 FDU36108&&@^# Panel Base Kit for 36”/42”D x 108”W Rect./Rounded Rect. $2818 $4033 $7113 $7305FDU36120&&@^# Panel Base Kit for 36”/42”D x 120”W Rect./Rounded Rect. $2818 $4033 $7417 $7593FDU36132&&@^# Panel Base Kit for 36”/42”D x 132”W Rect./Rounded Rect. $2818 $4033 $7722 $7879FDU36144&&@^# Panel Base Kit for 36”/42”D x 144”W Rect./Rounded Rect. $2818 $4033 $8035 $8161FDU36156&&@^# Panel Base Kit for 36”/42”D x 156”W Rect./Rounded Rect. $2818 $4033 $8339 $8449FDU36168&&@^# Panel Base Kit for 36”/42”D x 168”W Rect./Rounded Rect. $2818 $4033 $8653 $8737FDU36180&&@^# Panel Base Kit for 36”/42”D x 180”W Rect./Rounded Rect. $2818 $4033 $8959 $9024FDU36192&&@^# Panel Base Kit for 36”/42”D x 192”W Rect./Rounded Rect. $2818 $4033 $9262 $9307 FDU36204&&@^# Panel Base Kit for 36”/42”D x 204”W Rect./Rounded Rect. $3933 $5788 $11,461 $11,626FDU36216&&@^# Panel Base Kit for 36”/42”D x 216”W Rect./Rounded Rect. $3933 $5788 $11,766 $11,910FDU36228&&@^# Panel Base Kit for 36”/42”D x 228”W Rect./Rounded Rect. $3933 $5788 $12,084 $12,200FDU36240&&@^# Panel Base Kit for 36”/42”D x 240”W Rect./Rounded Rect. $3933 $5788 $12,387 $12,483

Foundation Panel Base and Trough Assemblies for 48”/54”D Rectangle/Rounded Rectangle Tables FDU4872&&@^# Panel Base Kit for 48”/54”D x 72”W Rect./Rounded Rect. $1696 $2261 $4452 $4560FDU4884&&@^# Panel Base Kit for 48”/54”D x 84”W Rect./Rounded Rect. $1696 $2261 $4757 $4847FDU4896&&@^# Panel Base Kit for 48”/54”D x 96”W Rect./Rounded Rect. $1696 $2261 $5066 $5131 FDU48108&&@^# Panel Base Kit for 48”/54”D x 108”W Rect./Rounded Rect. $2818 $4033 $7113 $7305FDU48120&&@^# Panel Base Kit for 48”/54”D x 120”W Rect./Rounded Rect. $2818 $4033 $7417 $7593FDU48132&&@^# Panel Base Kit for 48”/54”D x 132”W Rect./Rounded Rect. $2818 $4033 $7722 $7879FDU48144&&@^# Panel Base Kit for 48”/54”D x 144”W Rect./Rounded Rect. $2818 $4033 $8035 $8161FDU48156&&@^# Panel Base Kit for 48”/54”D x 156”W Rect./Rounded Rect. $2818 $4033 $8339 $8449FDU48168&&@^# Panel Base Kit for 48”/54”D x 168”W Rect./Rounded Rect. $2818 $4033 $8653 $8737FDU48180&&@^# Panel Base Kit for 48”/54”D x 180”W Rect./Rounded Rect. $2818 $4033 $8959 $9024FDU48192&&@^# Panel Base Kit for 48”/54”D x 192”W Rect./Rounded Rect. $2818 $4033 $9262 $9307 FDU48204&&@^# Panel Base Kit for 48”/54”D x 204”W Rect./Rounded Rect. $3933 $5788 $11,461 $11,626FDU48216&&@^# Panel Base Kit for 48”/54”D x 216”W Rect./Rounded Rect. $3933 $5788 $11,766 $11,910FDU48228&&@^# Panel Base Kit for 48”/54”D x 228”W Rect./Rounded Rect. $3933 $5788 $12,084 $12,200FDU48240&&@^# Panel Base Kit for 48”/54”D x 240”W Rect./Rounded Rect. $3933 $5788 $12,387 $12,483

Foundation™ - Base Assemblies for Rectangle/Rounded Rectangle Tops

72”-96”W 108”-192”W 204”-240”W

(SIN 711-11)

95

Foundation™ - Base Assemblies for Rectangle/Rounded Rectangle Tops


Foundation Panel Base and Trough Assemblies for 60”/66”D Rectangle/Rounded Rectangle Tables FDU6072&&@^# Panel Base Kit for 60”/66”D x 72”W Rect./Rounded Rect. $2272 $2822 $5316 $5419FDU6084&&@^# Panel Base Kit for 60”/66”D x 84”W Rect./Rounded Rect. $2272 $2822 $5929 $5699FDU6096&&@^# Panel Base Kit for 60”/66”D x 96”W Rect./Rounded Rect. $2272 $2822 $5929 $5993 FDU60108&&@^# Panel Base Kit for 60”/66”D x 108”W Rect./Rounded Rect. $3683 $4595 $8389 $8577FDU60120&&@^# Panel Base Kit for 60”/66”D x 120”W Rect./Rounded Rect. $3683 $4595 $8692 $8863FDU60132&&@^# Panel Base Kit for 60”/66”D x 132”W Rect./Rounded Rect. $3683 $4595 $8996 $9149FDU60144&&@^# Panel Base Kit for 60”/66”D x 144”W Rect./Rounded Rect. $3683 $4595 $9311 $9532FDU60156&&@^# Panel Base Kit for 60”/66”D x 156”W Rect./Rounded Rect. $3683 $4595 $9615 $9720FDU60168&&@^# Panel Base Kit for 60”/66”D x 168”W Rect./Rounded Rect. $3683 $4595 $9929 $10,009FDU60180&&@^# Panel Base Kit for 60”/66”D x 180”W Rect./Rounded Rect. $3683 $4595 $10,234 $10,295FDU60192&&@^# Panel Base Kit for 60”/66”D x 192”W Rect./Rounded Rect. $3683 $4595 $10,537 $10,580 FDU60204&&@^# Panel Base Kit for 60”/66”D x 204”W Rect./Rounded Rect. $5073 $6350 $13,150 $13,309FDU60216&&@^# Panel Base Kit for 60”/66”D x 216”W Rect./Rounded Rect. $5073 $6350 $13,454 $13,594FDU60228&&@^# Panel Base Kit for 60”/66”D x 228”W Rect./Rounded Rect. $5073 $6350 $13,774 $13,881FDU60240&&@^# Panel Base Kit for 60”/66”D x 240”W Rect./Rounded Rect. $5073 $6350 $14,075 $14,166

72”-96”W 108”-192”W 204”-240”W



SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

(SIN 711-11)

96

Notes

97

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Notes

98

Notes

99

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Notes

100

Notes

101

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Notes

102

Notes

103

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Notes

104

Notes

105

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

Notes

106

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +15% (-38, -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +20% 43, MC, SP and NT finishes) and Wilsonart

Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +25%



STEP 1 - Laminate Door Kits

STEP 1 - Veneer Door Kits(#) Veneer Suffix List:D Maple (stained similar to Kensington


Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

Product Specifications:> Individual doors are 5.25” x 24”.> Interior dimension of trough is 10.5”D x 7.25”H. Interior dimension of trough with aluminum trim is 10.5”D x 7”H.

Ordering Information:> Door kits require that the door kit cut-out is selected when ordering the table top.> Field installed.> Door is hinged and lays flat on tabletop when open. When closed there is a 1” gap for cord access.> Infeeds for Foundation Trough Power Kits are ordered separately.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Laminate Door Kits for Foundation Tables with Trough LPTD2L# Laminate Door Kit for 72”W Table (includes 2 doors) $376LPTD4L# Laminate Door Kit for 84, 96, or 108”W Table (includes 4 doors) $756LPTD6L# Laminate Door Kit for 120 or 132”W Table (includes 6 doors) $1131LPTD8L# Laminate Door Kit for 144 or 156”W Table (includes 8 doors) $1510LPTD10L# Laminate Door Kit for 168 or 180”W Table (includes 10 doors) $1886LPTD12L# Laminate Door Kit for 192 or 204”W Table (includes 12 doors) $2264LPTD14L# Laminate Door Kit for 216 or 228”W Table (includes 14 doors) $2642LPTD16L# Laminate Door Kit for 240”W Table (includes 16 doors) $3019 Veneer Door Kits for Foundation Tables with Trough LPTD2V# Veneer Door Kit for 72”W Table (includes 2 doors) $774LPTD4V# Veneer Door Kit for 84, 96, or 108”W Table (includes 4 doors) $1548LPTD6V# Veneer Door Kit for 120 or 132”W Table (includes 6 doors) $2323LPTD8V# Veneer Door Kit for 144 or 156”W Table (includes 8 doors) $3097LPTD10V# Veneer Door Kit for 168 or 180”W Table (includes 10 doors) $3873LPTD12V# Veneer Door Kit for 192 or 204”W Table (includes 12 doors) $4648LPTD14V# Veneer Door Kit for 216 or 228”W Table (includes 14 doors) $5422LPTD16V# Veneer Door Kit for 240”W Table (includes 16 doors) $6198

Aluminum Door Kits for Foundation Tables with Trough LPTD2AL Aluminum Door Kit for 72”W Table (includes 2 doors) $376LPTD4AL Aluminum Door Kit for 84, 96, or 108”W Table (includes 4 doors) $756LPTD6AL Aluminum Door Kit for 120 or 132”W Table (includes 6 doors) $1131LPTD8AL Aluminum Door Kit for 144 or 156”W Table (includes 8 doors) $1510LPTD10AL Aluminum Door Kit for 168 or 180”W Table (includes 10 doors) $1886LPTD12AL Aluminum Door Kit for 192 or 204”W Table (includes 12 doors) $2264LPTD14AL Aluminum Door Kit for 216 or 228”W Table (includes 14 doors) $2642LPTD16AL Aluminum Door Kit for 240”W Table (includes 16 doors) $3019

Foundation Trough Top-Access Door Kits (SIN 711-11)

107


Laminate Door Kits for Foundation Tables with Trough LPTD2L# Laminate Door Kit for 72”W Table (includes 2 doors) $376LPTD4L# Laminate Door Kit for 84, 96, or 108”W Table (includes 4 doors) $756LPTD6L# Laminate Door Kit for 120 or 132”W Table (includes 6 doors) $1131LPTD8L# Laminate Door Kit for 144 or 156”W Table (includes 8 doors) $1510LPTD10L# Laminate Door Kit for 168 or 180”W Table (includes 10 doors) $1886LPTD12L# Laminate Door Kit for 192 or 204”W Table (includes 12 doors) $2264LPTD14L# Laminate Door Kit for 216 or 228”W Table (includes 14 doors) $2642LPTD16L# Laminate Door Kit for 240”W Table (includes 16 doors) $3019 Veneer Door Kits for Foundation Tables with Trough LPTD2V# Veneer Door Kit for 72”W Table (includes 2 doors) $774LPTD4V# Veneer Door Kit for 84, 96, or 108”W Table (includes 4 doors) $1548LPTD6V# Veneer Door Kit for 120 or 132”W Table (includes 6 doors) $2323LPTD8V# Veneer Door Kit for 144 or 156”W Table (includes 8 doors) $3097LPTD10V# Veneer Door Kit for 168 or 180”W Table (includes 10 doors) $3873LPTD12V# Veneer Door Kit for 192 or 204”W Table (includes 12 doors) $4648LPTD14V# Veneer Door Kit for 216 or 228”W Table (includes 14 doors) $5422LPTD16V# Veneer Door Kit for 240”W Table (includes 16 doors) $6198

Aluminum Door Kits for Foundation Tables with Trough LPTD2AL Aluminum Door Kit for 72”W Table (includes 2 doors) $376LPTD4AL Aluminum Door Kit for 84, 96, or 108”W Table (includes 4 doors) $756LPTD6AL Aluminum Door Kit for 120 or 132”W Table (includes 6 doors) $1131LPTD8AL Aluminum Door Kit for 144 or 156”W Table (includes 8 doors) $1510LPTD10AL Aluminum Door Kit for 168 or 180”W Table (includes 10 doors) $1886LPTD12AL Aluminum Door Kit for 192 or 204”W Table (includes 12 doors) $2264LPTD14AL Aluminum Door Kit for 216 or 228”W Table (includes 14 doors) $2642LPTD16AL Aluminum Door Kit for 240”W Table (includes 16 doors) $3019


Power Kits for Foundation Tables with TroughLPTD2PWR Power Kit for 72” table (includes 3 receptacles and 1 telecom plate opening) $655LPTD3PWR Power Kit for 84” table (includes 6 receptacles and 2 telecom plate openings) $1256LPTD4PWR Power Kit for 96” table (includes 6 receptacles and 3 telecom plate openings) $1256LPTD5PWR Power Kit for 108” table (includes 6 receptacles and 2 telecom plate openings) $1911LPTD6PWR Power Kit for 120” or 132” table (includes 12 receptacles and 4 telecom plate openings) $1911LPTD8PWR Power Kit for 144” or 156” table (includes 12 receptacles and 6 telecom plate openings) $2646LPTD10PWR Power Kit for 168” or 180” table (includes 18 receptacles and 6 telecom plate openings) $3300LPTD12PWR Power Kit for 192” table (includes 24 receptacles and 8 telecom plate openings) $4036LPTD14PWR Power Kit for 204” table (includes 18 receptacles and 9 telecom plate openings) $4689LPTD16PWR Power Kit for 216”, 228” or 240” table (includes 27 receptacles and 9 telecom plate openings) $5424 Tip: Half of Power Kit is circuit 1 and half is circuit 2. Jumpers included. Tip: Power kit is 2.5”H x 5”W. Tip: Infeed ordered separately, below. Tip: Telecom plates ordered separately. See page 174.

Base Power-Ins LPTD72 Infeed for Foundation Trough Power Kit, 72”, hardwired $195LPTD120 Infeed for Foundation Trough Power Kit, 120”, hardwired $270 Tip: Includes 3-way splitter and extra jumper. Used when power infeed comes in through center base location.

Foundation Trough Power Kits

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

108

Foundation Panel and Drum Individual BasesProduct Specifications:> Base height is 27.75”> Bases include Levelers.

Ordering Information: > Top and bottom of base are open for cable management. Panel Bases have a cable management cutout on both sides at the top.> Boat Tables require smaller (less deep) bases on ends than middle. See page 26 for recommendations.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1 W1 Part Number List Price (US$)

Laminate Foundation Conference Table Panel Bases18 6 LPB618# Lam. Base, 18” x 6”, for 36/42”D table $51818 10 LPB1018# Lam. Base, 18” x 10”, for 36/42”D table $56224 6 LPB624# Lam. Base, 24” x 6”, for 48”/54”D table $54624 10 LPB1024# Lam. Base, 24” x 10”, for 48”/54”D table $58630 6 LPB630# Lam. Base, 30” x 6”, for 60”/66”D table $73930 10 LPB1030# Lam. Base, 30” x 10”, for 60”/66”D table $76336 6 LPB636# Lam. Base, 36” x 6”, for 72”D table $79536 10 LPB1036# Lam. Base, 36” x 10”, for 72”D table $828

Laminate Foundation Conference Table Panel Bases with Access Door18 6 LPBD618# Lam. Base w/ Access Door, 18” x 6”, for 36/42”D table $68118 10 LPBD1018# Lam. Base w/ Access Door, 18” x 10”, for 36/42”D table $83224 6 LPBD624# Lam. Base w/ Access Door, 24” x 6”, for 48”/54”D table $70224 10 LPBD1024# Lam. Base w/ Access Door, 24” x 10”, for 48”/54”D table $85230 6 LPBD630# Lam. Base w/ Access Door, 30” x 6”, for 60”/66”D table $95630 10 LPBD1030# Lam. Base w/ Access Door, 30” x 10”, for 60”/66”D table $101236 6 LPBD636# Lam. Base w/ Access Door, 36” x 6”, for 72”D table $97836 10 LPBD1036# Lam. Base w/ Access Door, 36” x 10”, for 72”D table $1036

Laminate Foundation Conference Table Panel Bases with Aluminum Trim18 6 LPBA618# Lam. Base w/ Alum. Trim, 18” x 6”, for 36/42”D table $70018 10 LPBA1018# Lam. Base w/ Alum. Trim, 18” x 10”, for 36/42”D table $73824 6 LPBA624# Lam. Base w/ Alum. Trim, 24” x 6”, for 48”/54”D table $70824 10 LPBA1024# Lam. Base w/ Alum. Trim, 24” x 10”, for 48”/54”D table $76530 6 LPBA630# Lam. Base w/ Alum. Trim, 30” x 6”, for 60”/66”D table $94430 10 LPBA1030# Lam. Base w/ Alum. Trim, 30” x 10”, for 60”/66”D table $95736 6 LPBA636# Lam. Base w/ Alum. Trim, 36” x 6”, for 72”D table $96336 10 LPBA1036# Lam. Base w/ Alum. Trim, 36” x 10”, for 72”D table $978

Laminate Foundation Conference Table Panel Bases with Aluminum Trim and Access Door18 6 LPBAD618# Lam. Base w/ Al. Trim, Access Door, 18” x 6”, for 36/42”D table $79318 10 LPBAD1018# Lam. Base w/ Al. Trim, Access Door, 18” x 10”, for 36/42”D table $87624 6 LPBAD624# Lam. Base w/ Al. Trim, Access Door, 24” x 6”, for 48”/54”D table $82024 10 LPBAD1024# Lam. Base w/ Al. Trim, Access Door, 24” x 10”, for 48”/54”D table $90230 6 LPBAD630# Lam. Base w/ Al. Trim, Access Door, 30” x 6”, for 60”/66”D table $99530 10 LPBAD1030# Lam. Base w/ Al. Trim, Access Door, 30” x 10”, for 60”/66”D table $110136 6 LPBAD636# Lam. Base w/ Al. Trim, Access Door, 36” x 6”, for 72”D table $106836 10 LPBAD1036# Lam. Base w/ Al. Trim, Access Door, 36” x 10”, for 72”D table $1152

Tip: Boat Tables require smaller (less deep) bases on ends than middle. See page 26 for recommendations. Laminate Foundation Conference Table Drum Base20 - LLDR20# Lam. Base, 20” diameter, for 48”D table $146624 - LLDR24# Lam. Base, 24” diameter, for 60”D table $1697 Tip: Ballast weight included. Tip: Top and bottom (not sides) of bases are open for cable management. Laminate Foundation Conference Table Drum Base with Access Door20 - LLDR20B# Lam. Base w/ Access Door, 20” diameter, for 48”D table $229024 - LLDR24B# Lam. Base w/ Access Door, 24” diameter, for 60”D table $2354

Tip: Ballast weight included.

D1

D1

D1

D1

W1

W1

W1

W1

(SIN 711-11)

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX *Wilsonart Non-Premium laminates (-38, -60) +35%Y *Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium,

Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.




Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

STEP 1

109


Laminate Foundation Conference Table Panel Bases18 6 LPB618# Lam. Base, 18” x 6”, for 36/42”D table $51818 10 LPB1018# Lam. Base, 18” x 10”, for 36/42”D table $56224 6 LPB624# Lam. Base, 24” x 6”, for 48”/54”D table $54624 10 LPB1024# Lam. Base, 24” x 10”, for 48”/54”D table $58630 6 LPB630# Lam. Base, 30” x 6”, for 60”/66”D table $73930 10 LPB1030# Lam. Base, 30” x 10”, for 60”/66”D table $76336 6 LPB636# Lam. Base, 36” x 6”, for 72”D table $79536 10 LPB1036# Lam. Base, 36” x 10”, for 72”D table $828

Laminate Foundation Conference Table Panel Bases with Access Door18 6 LPBD618# Lam. Base w/ Access Door, 18” x 6”, for 36/42”D table $68118 10 LPBD1018# Lam. Base w/ Access Door, 18” x 10”, for 36/42”D table $83224 6 LPBD624# Lam. Base w/ Access Door, 24” x 6”, for 48”/54”D table $70224 10 LPBD1024# Lam. Base w/ Access Door, 24” x 10”, for 48”/54”D table $85230 6 LPBD630# Lam. Base w/ Access Door, 30” x 6”, for 60”/66”D table $95630 10 LPBD1030# Lam. Base w/ Access Door, 30” x 10”, for 60”/66”D table $101236 6 LPBD636# Lam. Base w/ Access Door, 36” x 6”, for 72”D table $97836 10 LPBD1036# Lam. Base w/ Access Door, 36” x 10”, for 72”D table $1036

Laminate Foundation Conference Table Panel Bases with Aluminum Trim18 6 LPBA618# Lam. Base w/ Alum. Trim, 18” x 6”, for 36/42”D table $70018 10 LPBA1018# Lam. Base w/ Alum. Trim, 18” x 10”, for 36/42”D table $73824 6 LPBA624# Lam. Base w/ Alum. Trim, 24” x 6”, for 48”/54”D table $70824 10 LPBA1024# Lam. Base w/ Alum. Trim, 24” x 10”, for 48”/54”D table $76530 6 LPBA630# Lam. Base w/ Alum. Trim, 30” x 6”, for 60”/66”D table $94430 10 LPBA1030# Lam. Base w/ Alum. Trim, 30” x 10”, for 60”/66”D table $95736 6 LPBA636# Lam. Base w/ Alum. Trim, 36” x 6”, for 72”D table $96336 10 LPBA1036# Lam. Base w/ Alum. Trim, 36” x 10”, for 72”D table $978

Laminate Foundation Conference Table Panel Bases with Aluminum Trim and Access Door18 6 LPBAD618# Lam. Base w/ Al. Trim, Access Door, 18” x 6”, for 36/42”D table $79318 10 LPBAD1018# Lam. Base w/ Al. Trim, Access Door, 18” x 10”, for 36/42”D table $87624 6 LPBAD624# Lam. Base w/ Al. Trim, Access Door, 24” x 6”, for 48”/54”D table $82024 10 LPBAD1024# Lam. Base w/ Al. Trim, Access Door, 24” x 10”, for 48”/54”D table $90230 6 LPBAD630# Lam. Base w/ Al. Trim, Access Door, 30” x 6”, for 60”/66”D table $99530 10 LPBAD1030# Lam. Base w/ Al. Trim, Access Door, 30” x 10”, for 60”/66”D table $110136 6 LPBAD636# Lam. Base w/ Al. Trim, Access Door, 36” x 6”, for 72”D table $106836 10 LPBAD1036# Lam. Base w/ Al. Trim, Access Door, 36” x 10”, for 72”D table $1152

Tip: Boat Tables require smaller (less deep) bases on ends than middle. See page 26 for recommendations. Laminate Foundation Conference Table Drum Base20 - LLDR20# Lam. Base, 20” diameter, for 48”D table $146624 - LLDR24# Lam. Base, 24” diameter, for 60”D table $1697 Tip: Ballast weight included. Tip: Top and bottom (not sides) of bases are open for cable management. Laminate Foundation Conference Table Drum Base with Access Door20 - LLDR20B# Lam. Base w/ Access Door, 20” diameter, for 48”D table $229024 - LLDR24B# Lam. Base w/ Access Door, 24” diameter, for 60”D table $2354



Veneer Foundation Conference Table Panel Bases 18 6 LVPB618# Veneer Base, 18” x 6”, for 36/42”D table $120918 10 LVPB1018# Veneer Base, 18” x 10”, for 36/42”D table $126624 6 LVPB624# Veneer Base, 24” x 6”, for 48”D table $141424 10 LVPB1024# Veneer Base, 24” x 10”, for 48”D table $156730 6 LVPB630# Veneer Base, 30” x 6”, for 60”/66”D table $161830 10 LVPB1030# Veneer Base, 30” x 10”, for 60”/66”D table $177736 6 LVPB636# Veneer Base, 36” x 6”, for 72”D table $182336 10 LVPB1036# Veneer Base, 36” x 10”, for 72”D table $1986

Veneer Foundation Conference Table Panel Bases with Access Door 18 6 LVPBD618# Veneer Base w/ Access Door, 18” x 6”, for 36/42”D table $143818 10 LVPBD1018# Veneer Base w/ Access Door, 18” x 10”, for 36/42”D table $151924 6 LVPBD624# Veneer Base w/ Access Door, 24” x 6”, for 48”/54”D table $161424 10 LVPBD1024# Veneer Base w/ Access Door, 24” x 10”, for 48”/54”D table $176630 6 LVPBD630# Veneer Base w/ Access Door, 30” x 6”, for 60”/66”D table $184830 10 LVPBD1030# Veneer Base w/ Access Door, 30” x 10”, for 60”/66”D table $200736 6 LVPBD636# Veneer Base w/ Access Door, 36” x 6”, for 72”D table $208536 10 LVPBD1036# Veneer Base w/ Access Door, 36” x 10”, for 72”D table $2247

Veneer Foundation Conference Table Panel Bases with Aluminum Trim 18 6 LVPBA618# Veneer Base w/ Alum. Trim, 18” x 6”, for 36/42”D table $135918 10 LVPBA1018# Veneer Base w/ Alum. Trim, 18” x 10”, for 36/42”D table $145024 6 LVPBA624# Veneer Base w/ Alum. Trim, 24” x 6”, for 48”/54”D table $156324 10 LVPBA1024# Veneer Base w/ Alum. Trim, 24” x 10”, for 48”/54”D table $171630 6 LVPBA630# Veneer Base w/ Alum. Trim, 30” x 6”, for 60”/66” D table $176830 10 LVPBA1030# Veneer Base w/ Alum. Trim, 30” x 10”, for 60”/66” D table $192636 6 LVPBA636# Veneer Base w/ Alum. Trim, 36” x 6”, for 72” D table $193836 10 LVPBA1036# Veneer Base w/ Alum. Trim, 36” x 10”, for 72” D table $2136

Veneer Foundation Conference Table Panel Bases with Aluminum Trim and Access Door 18 6 LVPBAD618# Veneer Base w/ Alum. Trim, Access Door, 18” x 6”, for 36/42”D table $156218 10 LVPBAD1018# Veneer Base w/ Alum. Trim, Access Door, 18” x 10”, for 36/42”D table $164324 6 LVPBAD624# Veneer Base w/ Alum. Trim, Access Door, 24” x 6”, for 48”/54”D table $173824 10 LVPBAD1024# Veneer Base w/ Alum. Trim, Access Door, 24” x 10”, for 48”/54”D table $189030 6 LVPBAD630# Veneer Base w/ Alum. Trim, Access Door, 30” x 6”, for 60”/66”D table $197230 10 LVPBAD1030# Veneer Base w/ Alum. Trim, Access Door, 30” x 10”, for 60”/66”D table $213036 6 LVPBAD636# Veneer Base w/ Alum. Trim, Access Door, 36” x 6”, for 72”D table $220836 10 LVPBAD1036# Veneer Base w/ Alum. Trim, Access Door, 36” x 10”, for 72”D table $2370

Tip: Boat Tables require smaller (less deep) bases on ends than middle. See page 26 for recommendations. Veneer Foundation Conference Table Drum Base 20 LLVDR20# Veneer Base, 20” diameter, for 48”D table $241224 LLVDR24# Veneer Base, 24” diameter, for 60”D table $2643 Tip: Ballast weight included. Tip: Top and bottom (not sides) of bases are open for cable management. Veneer Foundation Conference Table Drum Base with Access Door 20 LLVDR20B# Veneer Base w/ Access Door, 20” diameter, for 48”D table $273724 LLVDR24B# Veneer Base w/ Access Door, 24” diameter, for 60”D table $2905


D1

D1

D1

D1

W1

W1

W1

W1



SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

FO

UN

DAT

ION

(SIN 711-11)

110

Notes

111

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2

Notes

112

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller, put “XX” in front and add $68 list. Maximum worksurface height is 42"> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other


STEP 3 Part No. Description List Price (US$)

Impression T-Legs with Levelers, package of twoLTP182?^ T-Legs, levelers, for 18”D table (16” spread) $558LTP242?^ T-Legs, levelers, for 24”D table (22” spread) $567LTP302?^ T-Legs, levelers, for 30-36”D table (26” spread) $606

Impression T-Legs on Casters, package of twoLTPC182?@^ T-Legs, casters, for 18”D table (16”spread) $634LTPC242?@^ T-Legs, casters, for 24”D table (22” spread) $662LTPC302?@^ T-Legs, casters, for 30-36”D table (26” spread) $689

Impression T-Leg Folding with Levelers, package of two LTPF182^ T-Legs Folding, levelers, for 18”D table (16” spread) $958LTPF242^ T-Legs Folding, levelers, for 24”D table (22” spread) $967LTPF302^ T-Legs Folding, levelers, for 30-36”D table (26” spread) $973

Tip: Designed for tables 60” wide and wider. Email [email protected] for other options.

Impression T-Leg Folding with Casters, package of two LTPFC182^@ T-Legs Folding, casters, for 18”D table (16” spread) $980LTPFC242^@ T-Legs Folding, casters, for 24”D table (22” spread) $986LTPFC302^@ T-Legs Folding, casters, for 30-36”D table (26” spread) $993


Leg Cable Management CoversLPCM^ Cable Management Cover for Leg with Leveler $44LPCMC^ Cable Management Cover for Leg with Caster $44LPCMA^ Cable Management Cover for Flip Table with Casters $44

Tip: Not applicable to Set Screw Adjustable legs.

(@) Caster Color Suffix List:B Black no chargeG Grey +$40

STEP 2 - Legs w/ Casters Only

Impression™ T-Legs

STEP 1(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62Z Routing holes in two legs +$124

(SIN 711-11)

113


STEP 3

(?) Routing Hole Suffix List:N No routing hole in one leg no chargeY Routing hole in one leg +$64Z Routing hole in two legs +$128

STEP 2



(*) Cable Management Suffix List:N No Cable Management no chargeG Grommet (one, center rear) +$19U Power/Data cut-out +$37 (one, center rear) X Other TBD

STEP 4

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium +$36 laminates (-38, -60). Orders of 100+

units have no upcharge.Y Formica Non-Premium Standard +$50 (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28,

-52, -78) laminates. Z Pionite Non-Premium, Nevamar +$72

Non-Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminates.


STEP 5

Product Specifications: > Angled leg tables nest in-line. Straight leg tables nest off-set. Nested, both leg styles have 7-1/2” between front

of one table to front of the next table. > Angled foot depth is approximately 16” for 18”D tables, 21.75” for 24”D tables, and 25.5” for 30”D tables.

Straight foot depth is approximately 16” for 18”D tables, 22” for 24”D tables, and 26” for 30”D tables. > As of May 2018, the Impression flip mechanism has changed.

Ordering Information:> Products on this page have been updated. If trying to match Impression T-Leg Flip bases ordered between 2008 and 2015, contact [email protected].> Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Impression T-Leg Flip Tables (Complete Table)


3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 18”D LFRS1848A^?@*# 18”D Impression Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1558LFRS1860A^?@*# 18”D Impression Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1707LFRS1872A^?@*# 18”D Impression Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1792LFRS1896A^?@*# 18”D Impression Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2142 3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 24”D LFRS2448A^?@*# 24”D Impression Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1603LFRS2460A^?@*# 24”D Impression Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1748LFRS2472A^?@*# 24”D Impression Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1834LFRS2496A^?@*# 24”D Impression Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2186 3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 30”D LFRS3048A^?@*# 30”D Impression Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1721LFRS3060A^?@*# 30”D Impression Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1855LFRS3072A^?@*# 30”D Impression Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1964LFRS3096A^?@*# 30”D Impression Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2361 3mm Edge Laminate worksurface on Impression T-Leg (angled) Flip Base on Casters LFRA2460A^?@*# 24”D Impression Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1808LFRA2472A^?@*# 24”D Impression Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $1894 LFRA3060A^?@*# 30”D Impression Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1915LFRA3072A^?@*# 30”D Impression Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $2023

Knife Edge (user side) Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 18”D LFRS1848K^?@*# 18”D Impression Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1651LFRS1860K^?@*# 18”D Impression Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1839LFRS1872K^?@*# 18”D Impression Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1938LFRS1896K^?@*# 18”D Impression Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2333 Knife Edge (user side)Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 24”D LFRS2448K^?@*# 24”D Impression Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1698LFRS2460K^?@*# 24”D Impression Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1881LFRS2472K^?@*# 24”D Impression Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1982LFRS2496K^?@*# 24”D Impression Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2378 Knife Edge (user side) Laminate worksurface on Impression T-Leg (straight) Flip Base on Casters, 30”D LFRS3048K^?@*# 30”D Impression Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1836LFRS3060K^?@*# 30”D Impression Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $2009LFRS3072K^?@*# 30”D Impression Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2136LFRS3096K^?@*# 30”D Impression Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2578 Knife Edge (user side) Laminate worksurface on Impression T-Leg (angled) Flip Base on Casters LFRA2460K^?@*# 24”D Impression Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1942LFRA2472K^?@*# 24”D Impression Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2042 LFRA3060K^?@*# 30”D Impression Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $2068LFRA3072K^?@*# 30”D Impression Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2194

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

(SIN 711-11)

STEP 1

114



STEP 2

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +$60Y Formica Non-Premium (includes 58, 43, +$90

MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.



Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10%

Stain Match fee)

STEP 3 - TT-Leg Filler Only

STEP 1(?) Routing Holes Suffix ListN No routing holes in column no chargeY Routing hole in one column +$64Z Routing holes in two columns +$128

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller, put “XX” in front and add $68 list.

Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".

> Installation hardware is included.> For number of bases required per table size and recommended base locations, see page

24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Impression TT-Leg with Levelers, package of one LTP48?^ TT-Leg, levelers for 42”D and 48”D table (34” spread) $694LTP60?^ TT-Leg, levelers for 60”D table (40" spread) $730

Tip: The 48” leg top plates are 4” apart and therefore cannot receive power/data units between them.

Impression TT-Leg with Levelers and Laminate Filler, package of one LTPL48?^# TT-Leg, levelers, laminate filler, for 42”D and 48”D table (34" spread) $805LTPL60?^# TT-Leg, levelers, laminate filler, for 60”D table (40" spread) $845

Tip: A center power/data location on a 2-piece table is not possible due to interference with the laminate filler panel on the leg (a leg is typically shared at the seam of the 2 pieces). Tip: TT-Leg with filler cannot accept the cable management cover.

Impression TT-Leg with Levelers and Veneer Filler, package of one LTPV48?^# TT-Leg, levelers, veneer filler, for 42”D and 48”D table (34" spread) $997LTPV60?^# TT-Leg, levelers, veneer filler, for 60”D table (40" spread) $1039

Tip: A center power/data location on a 2-piece table is not possible due to interference with the veneer filler panel on the leg (a leg is typically shared at the seam of the 2 pieces). Tip: TT-Leg with filler cannot accept the cable management cover.


for coordinating Impression furniture.

Impression TT-Legs - Conference (SIN 711-11)

115


Impression TT-Leg with Levelers, package of one LTP48?^ TT-Leg, levelers for 42”D and 48”D table (34” spread) $694LTP60?^ TT-Leg, levelers for 60”D table (40" spread) $730

Tip: The 48” leg top plates are 4” apart and therefore cannot receive power/data units between them.

Impression TT-Leg with Levelers and Laminate Filler, package of one LTPL48?^# TT-Leg, levelers, laminate filler, for 42”D and 48”D table (34" spread) $805LTPL60?^# TT-Leg, levelers, laminate filler, for 60”D table (40" spread) $845


Impression TT-Leg with Levelers and Veneer Filler, package of one LTPV48?^# TT-Leg, levelers, veneer filler, for 42”D and 48”D table (34" spread) $997LTPV60?^# TT-Leg, levelers, veneer filler, for 60”D table (40" spread) $1039

Tip: A center power/data location on a 2-piece table is not possible due to interference with the veneer filler panel on the leg (a leg is typically shared at the seam of the 2 pieces). Tip: TT-Leg with filler cannot accept the cable management cover.

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

116

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller,

put “XX” in front and add $68 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".

> Installation hardware is included.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.



STEP 1


STEP 2 - Legs w/ Casters OnlyPart Number Description List Price (US$)

Impression C-Leg with Levelers, package of two LCP182?^ C-Leg, levelers, for 18”D table (16” spread) $558LCP242?^ C-Leg, levelers, for 24”D table (22” spread) $567LCP302?^ C-Leg, levelers, for 30”D table (26” spread) $606

Impression C-Leg with Casters, package of two LCPC182?@^ C-Leg, casters, for 18”D table (16” spread) $634LCPC242?@^ C-Leg, casters, for 24”D table (22” spread) $662LCPC302?@^ C-Leg, casters, for 30”D table (26” spread) $689

Impression C-Legs

STEP 3

(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62Z Routing holes in two legs +$124

(SIN 711-11)

117


Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for 18"D tables LACP1848?^ Set-Screw C-Leg base with Beam, levelers, for 18”D x 48”W top $950LACP1860?^ Set-Screw C-Leg base with Beam, levelers, for 18”D x 60”W top $950LACP1872?^ Set-Screw C-Leg base with Beam, levelers, for 18”D x 72”W top $950 Tip: Height range is 29”-43” with 1.5” increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for 24"D tables LACP2448?^ Set-Screw C-Leg base with Beam, levelers, for 24”D x 48”W top $978LACP2460?^ Set-Screw C-Leg base with Beam, levelers, for 24”D x 60”W top $978LACP2472?^ Set-Screw C-Leg base with Beam, levelers, for 24”D x 72”W top $978 Tip: Height range is 29”-43” with 1.5” increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for 30"D tablesLACP3048?^ Set-Screw C-Leg base with Beam, levelers, for 30”D x 48”W top $1008LACP3060?^ Set-Screw C-Leg base with Beam, levelers, for 30”D x 60”W top $1008LACP3072?^ Set-Screw C-Leg base with Beam, levelers, for 30”D x 72”W top $1008 Tip: Height range is 29”-43” with 1.5” increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for 18"D tablesLACPC1848?^@ Set-Screw C-Leg base with Beam, casters, for 18” x 48” top $1008LACPC1860?^@ Set-Screw C-Leg base with Beam, casters, for 18” x 60” top $1008LACPC1872?^@ Set-Screw C-Leg base with Beam, casters, for 18” x 72” top $1008

Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for 24"D tables LACPC2448?^@ Set-Screw C-Leg base with Beam, casters, for 24” x 48” top $1033LACPC2460?^@ Set-Screw C-Leg base with Beam, casters, for 24” x 60” top $1033LACPC2472?^@ Set-Screw C-Leg base with Beam, casters, for 24” x 72” top $1033 Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for 30"D tables LACPC3048?^@ Set-Screw C-Leg base with Beam, casters, for 30” x 48” top $1062LACPC3060?^@ Set-Screw C-Leg base with Beam, casters, for 30” x 60” top $1062LACPC3072?^@ Set-Screw C-Leg base with Beam, casters, for 30” x 72” top $1062

Tip: Height range is 29”-43” with 1.5” increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

(SIN 711-11)

118

Product Specifications: > Powerlex Modesty includes 4-wire power system, 2 duplex receptacles, 4 data openings and jumpers. > See page 21 for Powerlex Grommet option, which can be specified in table top.

Ordering Information:> For a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a “Z” in front of the part number.> Installation hardware is included.> Base Power-In must be specified with base.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.



STEP 1

Impression C-Legs with Powerlex Modesty


Impression C-Leg Base Assembly with Powerlex Modesty and Levelers, for 24"D tables LCP24481^ C-Leg base with Powerlex Modesty, levelers, for 24” x 48” top, Circuit 1 $1204LCP24601^ C-Leg base with Powerlex Modesty, levelers, for 24” x 60” top, Circuit 1 $1353LCP24721^ C-Leg base with Powerlex Modesty, levelers, for 24” x 72” top, Circuit 1 $1502 LCP24482^ C-Leg base with Powerlex Modesty, levelers, for 24” x 48” top, Circuit 2 $1204LCP24602^ C-Leg base with Powerlex Modesty, levelers, for 24” x 60” top, Circuit 2 $1353LCP24722^ C-Leg base with Powerlex Modesty, levelers, for 24” x 72” top, Circuit 2 $1502 Tip: Powerlex Modesty includes 4-wire power system, 2 duplex receptacles, 4 data openings and jumpers. Tip: See page 21 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a “Z” in front of the part number. Tip: Specify Base Power-In (see below). Impression C-Leg Base Assembly with Powerlex Modesty and Levelers, for 30"D tables LCP30481^ C-Leg base with Powerlex Modesty, levelers, for 30” x 48” top, Circuit 1 $1230LCP30601^ C-Leg base with Powerlex Modesty, levelers, for 30” x 60” top, Circuit 1 $1380LCP30721^ C-Leg base with Powerlex Modesty, levelers, for 30” x 72” top, Circuit 1 $1530 LCP30482^ C-Leg base with Powerlex Modesty, levelers, for 30” x 48” top, Circuit 2 $1230LCP30602^ C-Leg base with Powerlex Modesty, levelers, for 30” x 60” top, Circuit 2 $1380LCP30722^ C-Leg base with Powerlex Modesty, levelers, for 30” x 72” top, Circuit 2 $1530 Tip: Powerlex Modesty includes 4-wire power system, 2 duplex receptacles, 4 data openings and jumpers. Tip: See page 21 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a “Z” in front of the part number. Tip: Specify Base Power-In (see below).

Base Power-Ins A8BP72 Base Power-In for Hardwire, 72” $161A8BP120 Base Power-In for Hardwire, 120” $203A1BP72 Base Power-In for RA Plug Circuit 1 (only), 72” $235

Tip: Use hardwire in feeds if UL listed (not recognized) is required. Tip: Infeeds have a 20 amp plug end which requires a 20 amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek 30129 15-Amp to 20-Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses.

Routing Hole Covers WCVRB Routing Hole Cover, Black $46WCVRS Routing Hole Cover, Silver $46WCVRT Routing Hole Cover, Medium Tone $46

Tip: Powerlex tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.

(SIN 711-9)

15 amp Receptacle 20 amp Receptacle

(SIN 711-9)

(SIN 711-11)

(SIN 711-9)

(SIN LISTED BELOW)

119

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

120

(SIN 711-11)

Product Specifications: > Straight legs are 3”x1.5”. Installation hardware is included.> Rectangular aluminum legs have two passageways 5/8" x 1-5/16" per leg. For steel legs there is a single

passageway 1-5/16" x 2-3/4".

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller

steel legs, put “XX” in front and add $68 list. Taller height anodized aluminum legs not available. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".

> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for avail-ability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 3 - Steel Legs Only




Impression Straight Legs with LevelersLPP?^ Straight Leg, Levelers, painted steel $193LPP2?^ Straight Leg, Levelers, painted steel, package of two $387LPPAL Straight Leg, Levelers, clear anodized aluminum $177LPPAL2 Straight Leg, Levelers, clear anodized aluminum, package of two $353

Impression Straight Legs with Levelers - Bar Height (42")LPPBH?^ Straight Leg, bar height, painted steel $261LPPBH2?^ Straight Leg, bar height, painted steel, package of two $523

Impression Straight Legs with CastersLPPC?@^ Straight Leg, Casters, painted steel $212LPPC2?@^ Straight Leg, Casters, painted steel, package of two $433LPPALC@ Straight Leg, Casters, clear anodized aluminum $200LPPALC2@ Straight Leg, Casters, clear anodized aluminum, package of two $400

Impression Set-Screw Adjustable Straight Legs with LevelersLPPA^ Set-Screw Straight Leg, levelers, painted steel $310LPPA2^ Set-Screw Straight Leg, levelers, painted steel, package of two $622

Tip: Height range is 29”-43” with 1 1/2” inch increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

Impression Set-Screw Adjustable Straight Legs with castersLPPAC@^ Set-Screw Straight Leg, casters, painted steel $383LPPAC2@^ Set-Screw Straight Leg, casters, painted steel, package of two $766

Tip: Height range is 29”-43” with 1.5” inch increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

Impression Straight Legs and Conference O-Bases

STEP 1 (?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62

(SIN LISTED BELOW)

(SIN 711-11)

(SIN 711-1)

(SIN 711-11)

(SIN 711-1)

(SIN 711-11)

121


Impression Conference O-Legs with Levelers, package of one LSQCONF18^ Conference O-Leg 36/42”D top $292LSQCONF24^ Conference O-Leg for 48”D top $299LSQCONF30^ Conference O-Leg for 54”D top $320LSQCONF36^ Conference O-Leg for 60”D top $344

Tip: For cable manager use the LPCMC cover below. Tip: For O-Legs for worksurfaces, see page 310.

Impression Cable Management CoversLPCM^ Cable Management Cover for Leg with Leveler $44LPCMC^ Cable Management Cover for Leg with Caster $44LPCMA^ Cable Management Cover for Flip Table with Casters $44 Tip: Does not fit LPPSQAL and LPPSQ square legs. Creates a 3/8" gap for cable routing.



SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

(SIN LISTED BELOW)

(SIN 711-11)

(SIN 711-9)

122


Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for avail-ability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 2 - Steel Legs Only



(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +$60Y Formica Non-Premium (includes 58, 43, +$90 MC, SP, and NT finishes), Formica Premium

(WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90

Brite White whiteboard laminate.


STEP 1 - Infill Only

STEP 1 - 4-Post X-Base Only(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$64

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list ($108 for a 4-post

x-base). For taller steel legs, put “XX” in front and add $68 list ($136 for a 4-post x-base). Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".



Impression X-Bases with Levelers LXPA^ X-base, levelers, for 24” round top (spread 22”x 22”) $653LXPB^ X-base, levelers, for 30-36” round or 24”-30” sq top (26” x 26” spread) $668LXPC^ X-base, levelers for 42” round or 36” sq top (32” x 32” spread) $681LXPD^ X-base, levelers for 48” round or 42” sq top (38” x 38” spread) $695

Impression 4-Post X-Base with Levelers LXPE?^ 4-Post X-base, levelers, for 54”-84” round top (spread 48” x 48”) $1676LXPEF# Laminate Infill (no door) for LXPE $1043LXPENFD# Laminate Infill (with door) for LXPE $1217

Impression X-Bases with Levelers - Bar HeightLXPBBA^ X-base, bar height, levelers, for 24” round top (22” x 22” spread) $708LXPBBB^ X-base, bar height, levelers, for 30-36” round or 24” - 30” sq top $700 (26” x 26” spread) LXPBBC^ X-base, bar height, levelers, for 42” round or 36” sq top $735 (32” x 32” spread) LXPBBD^ X-base, bar height, levelers, for 48” round or 42” sq top $749 (38” x 38” spread)

Impression 4-Post X-Base with Levelers - Bar HeightLXPBE?^ 4-Post X-base, bar height, levelers, for 54”-72” round top $1775 (48” x 48” spread) LXPBEF# Laminate Infill (no door) for LXPBE (bar height) $1313LXPBENFD# Laminate Infill (with door) for LXPBE (bar height) $1530

Impression X-Bases on CastersLXPAC^@ X-base, casters, for 24” round top (22” x 22” spread) $763LXPBC^@ X-base, casters, for 30-36” round or 24”-30” sq top (26” x 26” spread) $778LXPCC^@ X-base, casters, for 42” round or 36” sq top (32” x 32” spread) $791LXPDC^@ X-base, casters, for 48” round or 42” sq top (38” x 38” spread) $806

Impression 4-Post X-Base with Casters LXPEC?^@ 4-Post X-base, casters, for 54”-84” round top (48” x 48” spread) $1667

Impression X-Bases (SIN 711-11)

123


Impression X-Bases with Power/Data Top Plate and LevelersLX3PA^ X-base w/ P/D Top Plate, levelers, for 24” round top (22” x 22” spread) $761LX3PB^ X-base w/ P/D Top Plate, levelers, for 30-36” round or 24-30” sq top (26” x 26” spread) $776LX3PC^ X-base w/ P/D Top Plate, levelers, for 42” round or 36” sq top (32” x 32” spread) $790LX3PD^ X-base w/ P/D Top Plate, levelers, for 48” round or 42” sq top (38” x 38” spread) $801

Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units.

Impression X-Bases with Power/Data Top Plate and Levelers - Bar HeightLX3PBBA^ X-base w/ P/D Top Plate, bar height, levelers, for 24” round top (22” x 22” spread) $817LX3PBBB^ X-base w/ P/D Top Plate, bar height, levelers, for 30-36” round or 24”-30” sq top (26” x 26” spread) $840LX3PBBC^ X-base w/ P/D Top Plate, bar height, levelers, for 42” round or 36” sq top (32” x 32” spread) $845LX3PBBD^ X-base w/ P/D Top Plate, bar height, levelers, for 48” round or 42” sq top (38” x 38” spread) $856


Impression X-Bases with Power/Data Top Plate and CastersLX3PAC^@ X-base w/ P/D Top Plate, casters, for 24” round top (22” x 22” spread) $869LX3PBC^@ X-base w/ P/D Top Plate, casters, for 30-36” round or 24-30” sq top (26” x 26” spread) $885LX3PCC^@ X-base w/ P/D Top Plate, casters, for 42” round or 36” sq top (32” x 32” spread) $897LX3PDC^@ X-base w/ P/D Top Plate, casters, for 48” round or 42” sq top (38” x 38” spread) $910


Impression Flip X-Bases on CastersLXPAAC^@ Flip X-base, casters, for 24” round top (22” x 22” spread) $1094LXPABC^@ Flip X-base, casters, for 30-36” round or 24-30” sq top (26” x 26” spread) $1108LXPACC^@ Flip X-base, casters, for 42” round or 36” sq top (32” x 32” spread) $1122LXPADC^@ Flip X-base, casters, for 48” round or 42” sq top (38” x 38” spread) $1124



SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

(SIN 711-11)

124

Notes

125

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

126

Notes

127

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2

Notes

128



(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, +$40 -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +$55 MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +$79



STEP 2

STEP 1 Product Specifications: > Inner and outer back panels are steel> Monitor lifts accept monitors that adhere to the VESA Mounting Standard> Contains storage for keyboards and mouse with monitor. Monitor storage is released by pushing down on top.> Includes a cable trough in the bottom for plug strips or hardwire power.> Includes cable management kit.

Ordering Information:> Worksurface included.> Ships assembled.> See maximum monitor sizes (diagonal measurement) below. For larger sizes email [email protected]. > Powerlex Modesty includes 4-wire power system and 2 duplex receptacles. In a Classroom Table, the receptacles are

concealed within the modesty (not user accessible). For user access, specify a cut-out in Step 1. Use Villa, Axil-X, or Cove. For other power/data solutions, contact [email protected]. Power/data units are ordered separately.

> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Impression Classroom Tables with Monitor Lift(s) and LevelersL2CM3030^# Classroom Table with Single Monitor Lift, 30”D x 30”W $3221

Tip: Works with most flat screens, 23” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. L2CM3036^# Classroom Table with Single Monitor Lift, 30”D x 36”W $3357

Tip: Works with most flat screens, 25” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately) L2CM3060^# Classroom Table with Double Monitor Lift, 30”D x 60”W $5777

Tip: Works with most flat screens, 23” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. L2CM3072^# Classroom Table with Double Monitor Lift, 30”D x 72”W $5935

Tip: Works with most flat screens, 25” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately)

Impression Classroom Tables (Complete Tables) & Power Kits(SIN 711-9)

129


for coordinating CommandCenters and Lecterns.


Classroom Table Power Kits (Optional)L2CMP130 Kit for 30”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 1 $261L2CMP136 Kit for 36”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 1 $265L2CMP160 Kit for 60”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 1 $287L2CMP172 Kit for 72”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 1 $302 L2CMP230 Kit for 30”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 2 $261L2CMP236 Kit for 36”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 2 $265L2CMP260 Kit for 60”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 2 $287L2CMP272 Kit for 72”W Classroom Table, 2 duplex receptacles, no data, two jumpers, Circuit 2 $302

Base Power InfeedsA8BP72 Base Power Infeed for Hardwire, 72 $161A8BP120 Base Power Infeed for Hardwire, 120 $203A1BP72 Base Power Infeed for RA Plug Circuit 1 (only), 72” $235

Tip: Use hardwire infeeds if UL listed (not recognized) is required. Tip: Infeeds have a 20 amp plug end which requires a 20 amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek 30129 15-Amp to 20-Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses.

Routing Hole CoverWCVRB Routing Hole Cover, Black $46WCVRS Routing Hole Cover, Silver $46WCVRT Routing Hole Cover, Medium Tone $46

Tip: Classroom tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.


SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

IMP

RESS

ION

(SIN LISTED BELOW)

(SIN 711-9)

(SIN 711-11)

(SIN 711-9)

130

(#) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$18K One Power/Data Cut-out, Centered +$36C Two Power/Data Cut-outs +$72X Other TBD

STEP 1 Product Specifications: > Double support panels (12"H) run the entire length of the top to hide power data units and cables.

Ordering Information:> Part number includes entire table (ie. top, sides, and structure). > Tables 108" and longer have a center panel.> Assembly required.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(@) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have

no upcharge. Y Formica Non-Premium (includes +$308





STEP 2Part Number Description List Price (US$)

Laminate Landing Team Tables - 29" Seated HeightNEL293672#@ Team Table, seated, 36”D x 72”W $1162NEL293684#@ Team Table, seated, 36”D x 84”W $1386NEL293696#@ Team Table, seated, 36”D x 96”W $1386 NEL294272#@ Team Table, seated, 42”D x 72”W $1386NEL294284#@ Team Table, seated, 42”D x 84”W $1640NEL294296#@ Team Table, seated, 42”D x 96”W $1640 NEL294872#@ Team Table, seated, 48”D x 72”W $1386NEL294884#@ Team Table, seated, 48”D x 84”W $1640NEL294896#@ Team Table, seated, 48”D x 96”W $1640 NEL296096#@ Team Table, seated, 60”D x 96”W $2136 NEL2948108#@ Team Table, seated, 48”D x 108”W (2 piece top) $2829NEL2948120#@ Team Table, seated, 48”D x 120”W (2 piece top) $2829NEL2948132#@ Team Table, seated, 48”D x 132”W (2 piece top) $2992NEL2948144#@ Team Table, seated, 48”D x 144”W (2 piece top) $2992 NEL2960108#@ Team Table, seated, 60”D x 108”W (2 piece top) $2992NEL2960120#@ Team Table, seated, 60”D x 120”W (2 piece top) $2992NEL2960132#@ Team Table, seated, 60”D x 132”W (2 piece top) $3280NEL2960144#@ Team Table, seated, 60”D x 144”W (2 piece top) $3280

Laminate Wire Chases for 29"H Seated Height Landing Team Tables, Package of two (one for each end)NELPM29@ Laminate Wire Chases for Landing Team Table, seated $492

Landing™ Team Tables (Complete Tables) (SIN 711-11)

131


Laminate Landing Team Tables - 42" Standing HeightNEL423672#@ Team Table, standing, 36”D x 72”W $1499NEL423684#@ Team Table, standing, 36”D x 84”W $1725NEL423696#@ Team Table, standing, 36”D x 96”W $1725 NEL424272#@ Team Table, standing, 42”D x 72”W $1640NEL424284#@ Team Table, standing, 42”D x 84”W $1893NEL424296#@ Team Table, standing, 42”D x 96”W $1893 NEL424872#@ Team Table, standing, 48”D x 72”W $1640NEL424884#@ Team Table, standing, 48”D x 84”W $1893NEL424896#@ Team Table, standing, 48”D x 96”W $1893 NEL426096#@ Team Table, standing, 60”D x 96”W $2351 NEL4248108#@ Team Table, standing, 48”D x 108”W (2 piece top) $2914NEL4248120#@ Team Table, standing, 48”D x 120”W (2 piece top) $2914NEL4248132#@ Team Table, standing, 48”D x 132”W (2 piece top) $3083NEL4248144#@ Team Table, standing, 48”D x 144”W (2 piece top) $3083 NEL4260108#@ Team Table, standing, 60”D x 108”W (2 piece top) $3301NEL4260120#@ Team Table, standing, 60”D x 120”W (2 piece top) $3301NEL4260132#@ Team Table, standing, 60”D x 132”W (2 piece top) $3590NEL4260144#@ Team Table, standing, 60”D x 144”W (2 piece top) $3590

Laminate Wire Chases for 42"H Standing Height Landing Team Tables, Package of two (one for each end)NELPM42@ Laminate Wire Chases for Landing Team Table, standing $540

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

LA

ND

ING

132

(^) Paint Suffix ListS Silver (textured) no chargeG Storm (textured) no chargeR Black (textured) no chargeT Medium Tone (textured) no chargeW Arctic White (textured) no chargeZ Other (textured) +$TBD


STEP 2


MC, SP, and NT finishes), and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates.

Z Pionite Non-Premium, Nevamar Non- +$900 Premium, Formica Premium (WR, 42, 77,

46, RD finishes), and Formica 459-90 Brite White whiteboard laminates.


STEP 1 Product Specifications: > Post-form laminate base cabinet> 11 and 14 gauge steel mitered top structure to support extended top oversails> 11 and 14 gauge steel mitered, tapered plinth> Internal wire and cable routing passage> Each base includes one removable access door for positioning technology and routing cables

Ordering Information:> Tapered plinth and top structure painted to match> Power Data assemblies can be positioned directly over the center of bases. For other P/D positions, contact [email protected].> Only Alexander, Ellora (excluding PDE8), Flip-n-Go, Cove, and Villa power data assemblies fit over Lugano bases. For other P/D assemblies, contact [email protected].> Bases on this page can be used with Conference Rectangle, Boat and Capsule tops.> Tops are ordered separately.> Lugano bases shipped assembled. Bases are heavy and bulky, which may require disassembly in the field during

installation.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Lugano Square Conference Base, Seated Height (30")LU1S2942A#^ Square, Seated Base for 42”-48” top $6616LU1S2954B#^ Square, Seated Base for 54” top $6792LU1S2960C#^ Square, Seated Base for 60” top $7207 Lugano Rectangle Conference Base, Seated Height (30") LU12942A#^ Rectangle, Seated Base for 42”-48”D x 72”-84”W top $6868LU12942B#^ Rectangle, Seated Base for 42”-48”D x 96”-108”W top $8226LU12942C#^ Rectangle, Seated Base for 42”-48”D x 120”-132”W top $9700LU12942D#^ Rectangle, Seated Base for 42”-48”D x 144”W top $10,896 LU12954A#^ Rectangle, Seated Base for 54”D x 72”-84”W top $7123LU12954B#^ Rectangle, Seated Base for 54”D x 96”-108”W top $8631LU12954C#^ Rectangle, Seated Base for 54”D x 120”-132”W top $10,062LU12954D#^ Rectangle, Seated Base for 54”D x 144”W top $11,222 LU12960A#^ Rectangle, Seated Base for 60”D x 72”-84”W top $7999LU12960B#^ Rectangle, Seated Base for 60”D x 96”-108”W top $9358LU12960C#^ Rectangle, Seated Base for 60”D x 120”-132”W top $10,649LU12960D#^ Rectangle, Seated Base for 60”D x 144”W top $11,917

Lugano™ Fixed Height & Height-Adjustable Conference Bases(SIN 711-11)

133

Product Specifications: > Post-form laminate base cabinet> 11 and 14 gauge steel mitered top structure to support extended top oversails> 11 and 14 gauge steel mitered, tapered plinth> Internal wire and cable routing passage> Each base includes one removable access door for positioning technology and routing cables> Electric height-adjustable base adjustment range 30” – 49.5” > Electric height-adjustable base supports 200 lbs. load> Adjusts up to .75 inch/second. Adjustment speed may be slower with Back-painted Glass, Luminesse, and KrystalCast® tops.> Lugano bases on this page can be used with Laminate, Veneer, Back-painted Glass, KrystalCast®, Statement and Luminesse tops. Cambria

Quartz and Solid Surface tops cannot be paired with a Lugano height-adjustable base, specify a fixed-height Lugano base instead.

Ordering Information:> Tapered plinth and top structure painted to match> Power Data assemblies can be positioned directly over the center of bases. For other P/D positions, contact [email protected].> Only Alexander, Ellora (excluding PDE8), Flip-n-Go, Cove, and Villa power data assemblies fit over Lugano bases. For other

P/D assemblies, contact [email protected].> Bases on this page can be used with Conference Rectangle, Boat and Capsule tops.> Tops are ordered separately.> Lugano bases shipped assembled. Bases are heavy and bulky, which may require disassembly in the field during installation.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Lugano Rectangle Conference Base, Electric Height-Adjustable Tables LU1HA42A#^ Rectangle Base, Electric HA, for 42-48”D x 72”-84”W top $12,431LU1HA42B#^ Rectangle Base, Electric HA, for 42-48”D x 96”-108”W top $14,251LU1HA42C#^ Rectangle Base, Electric HA, for 42-48”D x 120”-132”W top $16,532 Tip: Back-painted glass tops not available. LU1HA54A#^ Rectangle Base, Electric HA, for 54”D x 72”-84”W top $12,714LU1HA54B#^ Rectangle Base, Electric HA, for 54”D x 96”-108”W top $14,667LU1HA54C#^ Rectangle Base, Electric HA, for 54”D x 120”-132”W top $16,973 Tip: Back-painted glass tops not available. Tip: Back-painted glass tops not available. LU1HA60A#^ Rectangle Base, Electric HA, for 60”D x 72”-84”W top $13,445LU1HA60B#^ Rectangle Base, Electric HA, for 60”D x 96”-108”W top $15,398LU1HA60C#^ Rectangle Base, Electric HA, for 60”D x 120”-132”W top $17,130 Tip: Back-painted glass tops not available. LU1HA60D#^ Rectangle Base, Electric HA, for 60”D x 144”W top $19,001 Tip: Back-painted glass tops not available.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

LUG

AN

O

(SIN 711-11)

134

STEP 3(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$40 (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard +$55 (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28,




STEP 2(?) Cable Management Suffix ListN No Cable Management no chargeG Grommet (one, center rear) +$19U Power/Data Cut-out (one, center rear) +$37X Other TBD

STEP 1(^) Paint Suffix ListG Storm +$100R Black +$100S Silver no chargeT Medium Tone +$100W Arctic White no chargeM Metallic Bronze +$100Z Other TBD

* Paint upcharges do not apply to Vertical Cable Managers or Cable Troughs.


**

*

*

Ritz Table (complete table) Product Specifications:> Tables nest in-line. Nested, each table is 7-1/2” between front of one table to front of next table.> Overall height is 29”H (special heights not available). > Foot is 23.5” deep, utilized on both 24” and 30”D tables. Ritz is not available with 18” or 36”D tops. > The dimension between legs (knee space) is: 39.5” for 48”W tops, 51.5” for 60”W tops, 63.5” for 72”W tops, 75.5” For

84”W tops, and 87.5” for 96”W tops. > Top is rectangular. Other top shapes and edge options are available, contact [email protected].> Underside of worksurface is black HPL. > Knife edge is on user side only, all other sides are 3mm. Undercut of knife edge is clear-coated MDF.

3mm edge tops have 3mm edge on all sides> Mechanism is black and is fully assembled. > Table legs and top are connected to the mechanism in the field.> Top locks in both the flat and flipped up positions for safety.

Ordering Information:> Pivoting modesty panels available on page 225. Undersizing the modesty panel by 12” is

required to allow modesty to fold properly. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


3mm PVC Edge worksurface on Ritz Flip Base with Black Casters, 24”D RZ2448A^?# 24”D Flip Table, 48”W Top with 3mm Edge $1395RZ2460A^?# 24”D Flip Table, 60”W Top with 3mm Edge $1529RZ2472A^?# 24”D Flip Table, 72”W Top with 3mm Edge $1580RZ2484A^?# 24”D Flip Table, 84”W Top with 3mm Edge $1720RZ2496A^?# 24”D Flip Table, 96”W Top with 3mm Edge $1734 3mm PVC Edge worksurface on Ritz Flip Base with Black Casters, 30”D RZ3048A^?# 30”D Flip Table, 48”W Top with 3mm Edge $1467RZ3060A^?# 30”D Flip Table, 60”W Top with 3mm Edge $1601RZ3072A^?# 30”D Flip Table, 72”W Top with 3mm Edge $1662RZ3084A^?# 30”D Flip Table, 84”W Top with 3mm Edge $1790RZ3096A^?# 30”D Flip Table, 96”W Top with 3mm Edge $1820 Knife Edge (user side) worksurface on Ritz Flip Base with Black Casters, 24”D RZ2448K^?# 24”D Flip Table, 48”W Top with Knife Edge User Side $1495RZ2460K^?# 24”D Flip Table, 60”W Top with Knife Edge User Side $1669RZ2472K^?# 24”D Flip Table, 72”W Top with Knife Edge User Side $1734RZ2484K^?# 24”D Flip Table, 84”W Top with Knife Edge User Side $1917RZ2496K^?# 24”D Flip Table, 96”W Top with Knife Edge User Side $1935 Knife Edge (user side) worksurface on Ritz Flip Base with Black Casters, 30”D RZ3048K^?# 30”D Flip Table, 48”W Top with Knife Edge User Side $1588RZ3060K^?# 30”D Flip Table, 60”W Top with Knife Edge User Side $1761RZ3072K^?# 30”D Flip Table, 72”W Top with Knife Edge User Side $1841RZ3084K^?# 30”D Flip Table, 84”W Top with Knife Edge User Side $2007RZ3096K^?# 30”D Flip Table, 96”W Top with Knife Edge User Side $2047

Vertical Cable Manager, Steel RZCAM^ Vertical Cable Manager, Steel $59

Cable Trough, SteelRZTR48^ Steel Cable Trough for 48”W Top $133RZTR60^ Steel Cable Trough for 60”W Top $141RZTR72^ Steel Cable Trough for 72”W Top $149

(SIN 711-11)

135

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - R

ITZ

136

(^) Paint Suffix List:G StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other


STEP 2

Product Specifications:> Standard height is 27.75”> Square tubes are 1.5” x 1.5”. Rectangle tubes are 1.5” x 3”.

Ordering Information:> Installation hardware included> Cable routing holes available on conference table bases. No cable routing hole in training table legs. > For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Sawhorse Training Table Legs (square tube) with Levelers, package of twoLQT182^ Training Table Legs, levelers, for 18”D Table $505LQT242^ Training Table Legs, levelers, for 24”D Table $537LQT302^ Training Table Legs, levelers, for 30”/36”D Table $553 Tip: Each package of 2 legs supports a complete training table.

Sawhorse Training Table Legs (square tube) with Black Casters, package of twoLQT182C^ Training Table Legs, casters, for 18”D Table $520LQT242C^ Training Table Legs, casters, for 24”D Table $551LQT302C^ Training Table Legs, casters, for 30”/36”D Table $568

Tip: Each package of 2 legs supports a complete training table.

Sawhorse Conference Table Base (rectangle tube) with levelers, package of two individual legsLQTCT?^ Conference Table Legs for 36”-60”D Table $430 Tip: Bases are designed to be inset 20-24” from conference table ends for tables greater than 96”W. Tip: Each package of 2 individual legs supports one side of a conference table.

Sawhorse Table Legs & Bases

STEP 1 - Conference Bases Only(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62Z Routing holes in two legs +$124

(SIN 711-9)

137

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SAW

HO

RSE

138

(^) Paint Suffix List:G StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other

Tip: Polished aluminum feet (not columns) are available at no charge. This creates a two-tone color scheme. Free form “Polished Feet” on your order and put a “Z” in front of the part number.


STEP 3

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $118 list. For taller, put XX” in front

and add $118 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum feet with painted steel vertical columns are available. See Step 3.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Sensation T-Legs with Levelers, package of twoLMT182?^ T-Leg, levelers, for 18”D table (14” spread) $542LMT242?^ T-Leg, levelers, for 24”D table (20” spread) $547LMT302?^ T-Leg, levelers, for 30-36”D table (26” spread) $573 Sensation T-Legs with Casters, package of twoLMTC182?@^ T-Leg, casters, for 18”D table (14” spread) $596LMTC242?@^ T-Leg, casters, for 24”D table (20” spread) $629LMTC302?@^ T-Leg, casters, for 30-36”D table (26” spread) $651

Sensation Folding T-Leg Base Assembly with Levelers, package of two LMTF182^ Folding T-Leg, levelers, for 18”D table (14” spread) $982LMTF242^ Folding T-Leg, levelers, for 24”D table (20” spread) $1044LMTF302^ Folding T-Leg, levelers, for 30-36”D table (26” spread) $1058

Tip: Folding T-Legs can be mounted on tables as short as 60’’W

Sensation Folding T-Leg Base Assembly with Casters, package of two LMTFC182@^ Folding T-Leg, casters, for 18”D table (14” spread) $1043LMTFC242@^ Folding T-Leg, casters, for 24”D table (20” spread) $1106LMTFC302@^ Folding T-Leg, casters, for 30-36”D table (26” spread) $1119

Tip: Folding T-Legs can be mounted on tables as short as 60’’W

Sensation TT-Leg with Levelers, package of one LMT48?^ TT-Leg, levelers for 42”D and 48”D table (39” spread) $543LMT60?^ TT-Leg, levelers for 60”D table (46” spread) $596 Tip: Split-Y Leg is another option, see page 136.

(@) Caster Color Suffix List:B Black no chargeG White with Grey Trim +$40

STEP 2 - Legs with Casters Only

Sensation™ T-Legs


(SIN 711-11)

139

(@) Caster Color Suffix List:B Black no chargeG White w/ Grey Trim +$40

STEP 3


STEP 2




STEP 4






STEP 5


3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 18”D LMRS1848A^?@*# 18”D Sensation Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1511LMRS1860A^?@*# 18”D Sensation Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1664LMRS1872A^?@*# 18”D Sensation Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1720LMRS1896A^?@*# 18”D Sensation Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $1892 3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 24”D LMRS2448A^?@*# 24”D Sensation Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1534LMRS2460A^?@*# 24”D Sensation Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1682LMRS2472A^?@*# 24”D Sensation Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1739LMRS2496A^?@*# 24”D Sensation Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $1910 3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 30”D LMRS3048A^?@*# 30”D Sensation Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1630LMRS3060A^?@*# 30”D Sensation Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1778LMRS3072A^?@*# 30”D Sensation Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1847LMRS3096A^?@*# 30”D Sensation Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2022 3mm Edge Laminate worksurface on Sensation T-Leg (angled) Flip Base on Casters LMRA2460A^?@*# 24”D Sensation Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1753LMRA2472A^?@*# 24”D Sensation Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $1810 LMRA3060A^?@*# 30”D Sensation Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1849LMRA3072A^?@*# 30”D Sensation Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $1918

Knife Edge (user side) Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 18”D LMRS1848K^?@*# 18”D Sensation Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1619LMRS1860K^?@*# 18”D Sensation Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1818LMRS1872K^?@*# 18”D Sensation Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1890LMRS1896K^?@*# 18”D Sensation Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2114 Knife Edge (user side)Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 24”D LMRS2448K^?@*# 24”D Sensation Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1644LMRS2460K^?@*# 24”D Sensation Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1837LMRS2472K^?@*# 24”D Sensation Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1910LMRS2496K^?@*# 24”D Sensation Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2134 Knife Edge (user side) Laminate worksurface on Sensation T-Leg (straight) Flip Base on Casters, 30”D LMRS3048K^?@*# 30”D Sensation Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1764LMRS3060K^?@*# 30”D Sensation Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1957LMRS3072K^?@*# 30”D Sensation Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2046LMRS3096K^?@*# 30”D Sensation Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2274 Knife Edge (user side) Laminate worksurface on Sensation T-Leg (angled) Flip Base on Casters LMRA2460K^?@*# 24”D Sensation Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1908LMRA2472K^?@*# 24”D Sensation Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1981 LMRA3060K^?@*# 30”D Sensation Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $2028LMRA3072K^?@*# 30”D Sensation Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2117

COORDINATING FURNITURE See page 208

for coordinating Sensation furniture.

Sensation T-Leg Flip Tables (Complete Table)Product Specifications: > Angled leg flip tables nest in-line. Straight leg flip tables nest off-set. Nested, both leg styles have 7-1/2” between front of one table to front of the next table. > Angled foot depth is approximately 13” for 18”D flip tables, 19” for 24”D flip tables, and 24.5” for 30”D flip tables. Straight foot depth is approximately 13.5” for 18”D flip tables, 19.5” for 24”D flip tables, and 25.5” for 30”D flip tables. > As of May 2018, the Sensation flip mechanism has changed.

Ordering Information:> Installation hardware is included.> A special 7”H hinged modesty panel, or a narrower width, are recommended for use with 30”D Sensation flip bases to

avoid potential paint scratches on the feet. Contact [email protected] for more details.> Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SEN

SATI

ON

(SIN 711-11)

STEP 1

140




STEP 3

Product Specifications: > Straight leg flip tables nest off-set. Nested, tables have 7-1/2” between front of one table to front of the next table. > Straight foot depth is approximately 13.5” for 18”D flip tables, 19.5” for 24”D flip tables, and 25.5” for 30”D flip tables.

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $118 list. For taller, put “XX” in front and add $118

list. Double for 4-Post “X” Base. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum feet with painted steel vertical columns are available. See Step 3.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.




Sensation Straight Legs (2.3" diameter) with levelersLMA?^ Straight Leg, leveler $153LMA2?^ Straight Leg, leveler, package of two $306

Sensation Straight Legs with locking casters LMAC?@^ Straight Leg, caster $169LMAC2?@^ Straight Leg, caster, package of two $341

Sensation X-Bases with Levelers LMXA?^ X-Base, levelers, for 24” round table (22” x 22” spread) $594LMXB?^ X-Base, levelers, for 30-36” round or 24-30” square table (26” x 26” spread) $618LMXC?^ X-Base, levelers, for 42” round or 36” square table (32” x 32” spread) $630 Tip: 48” Round and 42" Square tops use two Y-legs (LMY302^@)

Sensation X-Bases with levelers - Bar HeightLMXBBA?^ X-Base, bar height, levelers, for 24” round table (22” x 22” spread) $648LMXBBB?^ X-Base, bar height, levelers, for 30-36” round or 24-30” square table (26” x 26” spread) $671LMXBBC?^ X-Base, bar height, levelers, for 42” round or 36” square table (32” x 32” spread) $683

Sensation X-Bases on Casters LMXAC?@^ X-Base, casters, for 24” round table (22” x 22” spread) $633LMXBC?@^ X-Base, casters, for 30-36” round or 24-30” square table (26” x 26” spread) $653LMXCC?@^ X-Base, casters, for 42” round or 36” square table (32” x 32” spread) $667

Sensation Flip X-Bases on Casters LMXAAC@^ Flip X-Base, casters for 24” round table (22” x 22” spread) $913LMXABC@^ Flip X-Base, casters for 30-36” round table (26” x 26” spread) $929

Sensation 4-Post X-Bases with Levelers LMXE?^ 4-Post X-Base, levelers, for 60” round or 48” square table (38” x 38” spread) $1055LMXF?^ 4-Post X-Base, levelers, for 72”-84” 2-piece round table (46” x 46” spread) $1201

Sensation Straight Legs, X-Bases, & C-Legs


(SIN 711-11)

141


Sensation C-Legs with Levelers, package of two LMC182?^ C-Leg, leveler, for 18”D table (17” spread) $542LMC242?^ C-Leg, leveler, for 24”D table (20” spread) $547LMC302?^ C-Leg, leveler, for 30”D table (27” spread) $573 Sensation C-Legs with Casters, package of two LMCC182?@^ C-Leg, caster, for 18”D table (17” spread) $596LMCC242?@^ C-Leg, caster, for 24”D table (20” spread) $629LMCC302?@^ C-Leg, caster, for 30”D table (27” spread) $651

COORDINATING FURNITURE See pages 188-189


SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SEN

SATI

ON

(SIN 711-11)

142



Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability ofspecific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 3

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $118 list. For taller, put “XX” in

front and add $118 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum feet with painted steel vertical columns are available. See Step 3.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.




Sensation Y-Legs with Levelers, package of two LMY182?^ Y-Leg, levelers, for 18”D table (15” spread) $561LMY242?^ Y-Leg, levelers, for 24”D table (21” spread) $564LMY302?^ Y-Leg, levelers, for 30”D table (25” spread) $586

Sensation Y-Legs with Casters, package of two LMYC182?@^ Y-Leg, casters, for 18”D table (15” spread) $608LMYC242?@^ Y-Leg, casters, for 24”D table (21” spread) $641LMYC302?@^ Y-Leg, casters, for 30”D table (25” spread) $663

Sensation Straight Y-Legs


143

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SEN

SATI

ON

Notes

144


Tip: Polished aluminum feet (not columns or footer bar) are available at no charge. This creates a two-tone color scheme. Free form “Polished Feet” on your order and put a “Z” in front of the part number.


STEP 2

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part

number and add $118 list. For taller, put “XX” in front and add $118 list. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum feet with painted steel vertical columns and painted

steel footer bars are available. See Step 2.> Routing holes are positioned in the center base. For routing holes in an end base, contact

[email protected].> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Part Number Description List Price (US$) Sensation Y-leg base with Footer Bar and Levelers, for 36"D tables - base spread 20.75" LMYB3672?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 72” top $1054LMYB3684?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 84” top $1083LMYB3696?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 96” top $1116 Sensation Y-leg base with Footer Bar and Levelers, for 42"D tables - base spread 26" LMYB4272?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 72” top $1093LMYB4284?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 84” top $1124LMYB4296?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 96” top $1154

Sensation Y-leg base with Footer Bar and Levelers, for 48"D tables - base spread 26" LMYB4872?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 72” top $1093LMYB4884?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 84” top $1124LMYB4896?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 96” top $1154

Sensation Split Y-Leg Bases with Rectangle Footer Bar and Levelers 48-60"D Tables LMYD108?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 108”W top $2801LMYD120?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 120”W top $2801LMYD132?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 132”W top $2895LMYD144?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 144”W top $2965LMYD156?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 156”W top $3093LMYD168?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 168”W top $3093 LMYD180?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 180”W top $4035LMYD192?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 192”W top $4139LMYD204?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 204”W top $4139LMYD216?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 216”W top $4267LMYD228?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 228”W top $4331LMYD240?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 240”W top $4331

Sensation Split Y-Leg Bases, package of two LMYE482?^ Split Y-Leg for 48”D table $1222LMYE602?^ Split Y-Leg for 60”D table $1284

Tip: Two and three-piece tables also require a double T-Leg at the seams.

COORDINATING FURNITURE See pages 188-189


Sensation Conference Y-Bases

STEP 1(?) Routing Holes Suffix ListN No routing holes in base no chargeY Routing hole in one column +$62Z Routing holes in two columns +$124

(SIN 711-11)

145

Part Number Description List Price (US$) Sensation Y-leg base with Footer Bar and Levelers, for 36"D tables - base spread 20.75" LMYB3672?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 72” top $1054LMYB3684?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 84” top $1083LMYB3696?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 96” top $1116 Sensation Y-leg base with Footer Bar and Levelers, for 42"D tables - base spread 26" LMYB4272?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 72” top $1093LMYB4284?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 84” top $1124LMYB4296?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 96” top $1154

Sensation Y-leg base with Footer Bar and Levelers, for 48"D tables - base spread 26" LMYB4872?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 72” top $1093LMYB4884?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 84” top $1124LMYB4896?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 96” top $1154

Sensation Split Y-Leg Bases with Rectangle Footer Bar and Levelers 48-60"D Tables LMYD108?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 108”W top $2801LMYD120?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 120”W top $2801LMYD132?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 132”W top $2895LMYD144?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 144”W top $2965LMYD156?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 156”W top $3093LMYD168?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 168”W top $3093 LMYD180?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 180”W top $4035LMYD192?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 192”W top $4139LMYD204?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 204”W top $4139LMYD216?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 216”W top $4267LMYD228?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 228”W top $4331LMYD240?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 48”-60”D x 240”W top $4331

Sensation Split Y-Leg Bases, package of two LMYE482?^ Split Y-Leg for 48”D table $1222LMYE602?^ Split Y-Leg for 60”D table $1284


Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SEN

SSAT

ION

146


Solano T-Legs with Levelers, package of two LCATP182?^ T-Leg, levelers for 18”D table (16” spread) $558LCATP242?^ T-Leg, levelers for 24”D table (22” spread) $567LCATP302?^ T-Leg, levelers for 30-36”D table (26” spread) $606

Solano T-Legs on Casters, package of two LCATPC182?@^ T-Leg, casters for 18”D table (16” spread) $634LCATPC242?@^ T-Leg, casters for 24”D table (22” spread) $662LCATPC302?@^ T-Leg, casters for 30-36”D table (26” spread) $689

Solano T-Leg Folding with Levelers, package of two LCATPF182^ T-Leg Folding, levelers, for 18"D table $972LCATPF242^ T-Leg Folding, levelers, for 24"D table $981LCATPF302^ T-Leg Folding, levelers, for 30"D table $987


Solano T-Leg Folding with Casters, package of two LCATPFC182@^ T-Leg Folding, casters, for 18"D table $994LCATPFC242@^ T-Leg Folding, casters, for 24"D table $1001LCATPFC302@^ T-Leg Folding, casters, for 30"D table $1008


Leg Cable Management CoversLPCM^ Cable Management Cover for Leg with Leveler $44LPCMC^ Cable Management Cover for Leg with Caster $44LPCMA^ Cable Management Cover for Flip Table with Casters $44




Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller, put “XX” in front and add $68 list. Maximum worksurface height is 42"> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Solano™ T-Legs (formerly Captiva)

STEP 3(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other


(SIN 711-11)

147


STEP 3


STEP 2




STEP 4






STEP 5


3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base on Casters, 18”D LCRS1848A^?@*# 18”D Solano Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1558LCRS1860A^?@*# 18”D Solano Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1707LCRS1872A^?@*# 18”D Solano Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1792LCRS1896A^?@*# 18”D Solano Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2024 3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base, 24”D LCRS2448A^?@*# 24”D Solano Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1603LCRS2460A^?@*# 24”D Solano Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1748LCRS2472A^?@*# 24”D Solano Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1834LCRS2496A^?@*# 24”D Solano Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2065 3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base, 30”D LCRS3048A^?@*# 30”D Solano Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1721LCRS3060A^?@*# 30”D Solano Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1855LCRS3072A^?@*# 30”D Solano Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1964LCRS3096A^?@*# 30”D Solano Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $2233 3mm Edge Laminate worksurface on Solano T-Leg (angled) Flip Base LCRA2460A^?@*# 24”D Solano Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1808LCRA2472A^?@*# 24”D Solano Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $1894 LCRA3060A^?@*# 30”D Solano Angled T-Leg Flip Table 60”W Top w/ 3mm Edge $1915LCRA3072A^?@*# 30”D Solano Angled T-Leg Flip Table 72”W Top w/ 3mm Edge $2023

Knife Edge (user side) Laminate worksurface on Solano T-Leg (straight) Flip Base on Casters, 18”D LCRS1848K^?@*# 18”D Solano Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1651LCRS1860K^?@*# 18”D Solano Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1839LCRS1872K^?@*# 18”D Solano Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1938LCRS1896K^?@*# 18”D Solano Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2215 Knife Edge (user side) Laminate worksurface on Solano T-Leg (straight) Flip Base, 24”D LCRS2448K^?@*# 24”D Solano Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1698LCRS2460K^?@*# 24”D Solano Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1881LCRS2472K^?@*# 24”D Solano Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1982LCRS2496K^?@*# 24”D Solano Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2257 Knife Edge (user side) Laminate worksurface on Solano T-Leg (straight) Flip Base, 30”D LCRS3048K^?@*# 30”D Solano Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1836LCRS3060K^?@*# 30”D Solano Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $2009LCRS3072K^?@*# 30”D Solano Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2136LCRS3096K^?@*# 30”D Solano Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $2449 Knife Edge (user side) Laminate worksurface on Solano T-Leg (angled) Flip Base LCRA2460K^?@*# 24”D Solano Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1942LCRA2472K^?@*# 24”D Solano Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2042 LCRA3060K^?@*# 30”D Solano Angled T-Leg Flip Table 60”W Top w/ Knife Edge User Side $2068LCRA3072K^?@*# 30”D Solano Angled T-Leg Flip Table 72”W Top w/ Knife Edge User Side $2194

Solano T-Leg Flip Tables (Complete Tables)Product Specifications: > Angled leg tables nest in-line. Straight leg tables nest off-set. Nested, both leg styles have 7-1/2” between front of one

table to front of the next table. > Angled foot depth is approximately 16” for 18”D tables, 21.75” for 24”D tables, and 25.5” for 30”D tables. Straight foot

depth is approximately 16” for 18”D tables, 22” for 24”D tables, and 26” for 30”D tables. > As of May 2018, the Solano flip mechanism has changed.

Ordering Information:> Includes Top with 3mm edge or knife edge on user side. > Angled legs nest in-line. Straight legs nest off-set.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SOLA

NO

(SIN 711-11)

STEP 3

STEP 1

STEP 4

STEP 5

148


MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and

Formica 459-90 Brite White whiteboard laminate.



Maple laminate)T Walnut (stained similar to Ebony Recon laminate) 2 Walnut (stained similar to Pinnacle

Walnut laminate)6 Rift Cut Oak (clear coat) 7 Walnut (clear coat)9 Cherry (stained similar to Select Cherry laminate)X Stain Match (add a one-time $700 list +10% Stain Match fee)

STEP 3 - TT-Leg Filler Only



STEP 1(?) Routing Holes Suffix ListN No routing holes in column no chargeY Routing hole in one column +$64Z Routing holes in two columns +$128


Solano TT-Leg with Levelers, package of oneLCATP48?^ TT-Leg, levelers for 42”D or 48”D table (34” spread) $694LCATP60?^ TT-Leg, levelers for 60”D table (40” spread) $730

Tip: The 48” leg top plates are 4” apart and therefore cannot receive power/data units between them. Solano TT-Leg with Levelers and Laminate Filler, package of one LCATPL48?^# TT-Leg, levelers, laminate filler for 42”D or 48”D table (34” spread) $828LCATPL60?^# TT-Leg, levelers, laminate filler for 60”D table (40” spread) $870


Solano TT-Leg with Levelers and Veneer Filler, package of one LCATPV48?^# TT-Leg, levelers, veneer filler for 42”D or 48”D table (34” spread) $1026LCATPV60?^# TT-Leg, levelers, veneer filler for 60”D table (40” spread) $1069


Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list.

For taller, put “XX” in front and add $68 list. Maximum worksurface height is 42".> Installation hardware is included.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Solano TT-Legs - Conference (formerly Captiva) (SIN 711-9)

149

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SO

LAN

O

150


Solano C-Leg with Levelers, package of two LCACP182?^ C-Leg, levelers, for 18”D table (16” spread) $558LCACP242?^ C-Leg, levelers, for 24”D table (22” spread) $567LCACP302?^ C-Leg, levelers, for 30”D table (26” spread) $606

Solano C-Leg with Casters, package of two LCACPC182?@^ C-Leg, casters, for 18”D table (16” spread) $634LCACPC242?@^ C-Leg, casters, for 24”D table (22” spread) $662LCACPC302?@^ C-Leg, casters, for 30”D table (26” spread) $689

Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for 18"D Tables (16" spread) LCAACP1848?^ Set-Screw C-Leg base assembly, levelers, for 18”D x 48”W top $950LCAACP1860?^ Set-Screw C-Leg base assembly, levelers, for 18”D x 60”W top $950LCAACP1872?^ Set-Screw C-Leg base assembly, levelers, for 18”D x 72”W top $950

Tip: Height range is 29"-43" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for 24"D Tables (22" spread) LCAACP2448?^ Set-Screw C-Leg base assembly, levelers, for 24”D x 48”W top $978LCAACP2460?^ Set-Screw C-Leg base assembly, levelers, for 24”D x 60”W top $978LCAACP2472?^ Set-Screw C-Leg base assembly, levelers, for 24”D x 72”W top $978

Tip: Height range is 29"-43" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for 30"D Tables (26" spread) LCAACP3048?^ Set-Screw C-Leg base assembly, levelers, for 30”D x 48”W top $1008LCAACP3060?^ Set-Screw C-Leg base assembly, levelers, for 30”D x 60”W top $1008LCAACP3072?^ Set-Screw C-Leg base assembly, levelers, for 30”D x 72”W top $1008

Tip: Height range is 29"-43" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.





Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller, put “XX” in front

and add $68 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".> Installation hardware is included.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Solano C-Legs (formerly Captiva)

STEP 1 (?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62Z Routing holes in two legs +$124

(SIN 711-9)

151


Solano C-Leg Base Assembly with Powerlex Modesty and Levelers, for 24"D tables (22" spread) LCACP24481^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 48”W top, Circuit 1 $1204LCACP24601^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 60”W top, Circuit 1 $1353LCACP24721^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 72”W top, Circuit 1 $1502 LCACP24482^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 48”W top, Circuit 2 $1204LCACP24602^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 60”W top, Circuit 2 $1353LCACP24722^ C-Leg Base with Powerlex Modesty, Levelers for 24”D x 72”W top, Circuit 2 $1502

Tip: Powerlex Modesty includes 4-wire power system, 2 duplex receptacles, 4 data openings and jumpers. Tip: See page 21 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a “Z” in front of the part number. Tip: Specify Base Power-In (see below). Solano C-Leg Base Assembly with Powerlex Modesty and Levelers, for 30"D tables LCACP30481^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 48”W top, Circuit 1 $1230LCACP30601^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 60”W top, Circuit 1 $1380LCACP30721^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 72”W top, Circuit 1 $1530 LCACP30482^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 48”W top, Circuit 2 $1230LCACP30602^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 60”W top, Circuit 2 $1380LCACP30722^ C-Leg Base with Powerlex Modesty, Levelers for 30”D x 72”W top, Circuit 2 $1530

Tip: Powerlex Modesty includes 4-wire power system, 2 duplex receptacles, 4 data openings and jumpers. Tip: See page 21 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a “Z” in front of the part number. Tip: Specify Base Power-In (see below).




Tip: Powerlex tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.


SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SO

LAN

O

(SIN 711-9)

(SIN 711-11)

(SIN 711-9)

(SIN 711-9)

(SIN LISTED BELOW)

152



STEP 2



(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +$60Y Formica Non-Premium (includes 58, 43, +$90 MC, SP, and NT finishes), Formica Premium




STEP 1 - Infill Only

STEP 1 - 4-Post X-Base Only(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$64Z Routing holes in two legs +$128


Solano X-Bases with Levelers LCAXPA^ X-base, levelers, for 24” round top (22”x 22” spread) $660LCAXPB^ X-base, levelers, for 30-36” round or 24”-30” sq top (26”x 26” spread) $674LCAXPC^ X-base, levelers, for 42” round or 36” sq top (32”x 32” spread) $688LCAXPD^ X-base, levelers, for 48” round or 42” sq top (38”x 38” spread) $702 Solano 4-Post X-Base with LevelersLCAXPE?^ 4-Post X-Base, levelers, for 54”-84” Round Top $1693LXPEF# Laminate Infill (no door) for LCAXPE $1043LXPENFD# Laminate Infill (with door) for LCAXPE $1217

Solano X-Bases with Levelers - Bar HeightLCAXPBBA^ X-base, bar height, levelers, for 24” round top (22” x 22” spread) $715LCAXPBBB^ X-base, bar height, levelers, for 30-36” round or 24” - 30” sq top $707 (26” x 26” spread) LCAXPBBC^ X-base, bar height, levelers, for 42” round or 36” sq top $742 (32” x 32” spread) LCAXPBBD^ X-base, bar height, levelers, for 48” round or 42” sq top $757 (38” x 38” spread)

Solano 4-Post X-Base with Levelers - Bar HeightLCAXPBE?^ 4-Post X-base, bar height, levelers, for 54”-72” round top $1793 (48” x 48” spread) LCAXPBEF# Laminate Infill (no door) for LCAXPBE (bar height) $1313LCAXPBENFD# Laminate Infill (with door) for LCAXPBE (bar height) $1530

Solano X-Bases with Casters LCAXPAC^@ X-base, casters, for 24” round top (22”x 22” spread) $771LCAXPBC^@ X-base, casters, for 30-36” round or 24”-30” sq top (26”x 26” spread) $785LCAXPCC^@ X-base, casters, for 42” round or 36” sq top (32”x 32” spread) $799LCAXPDC^@ X-base, casters, for 48” round or 42” sq top (38”x 38” spread) $814

Solano 4-Post X-Base with CastersLCAXPEC?^@ 4-Post X-Base, casters, for 54”-84” Round Top $1684

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list ($108 for a 4-post

x-base). For taller steel legs, put “XX” in front and add $68 list ($136 for a 4-post x-base). Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".


Solano X-Bases (formerly Captiva)

(SIN 711-11)

(SIN 711-9)

(SIN 711-9)

(SIN LISTED BELOW)

153


Solano X-Bases with Levelers LCAXPA^ X-base, levelers, for 24” round top (22”x 22” spread) $660LCAXPB^ X-base, levelers, for 30-36” round or 24”-30” sq top (26”x 26” spread) $674LCAXPC^ X-base, levelers, for 42” round or 36” sq top (32”x 32” spread) $688LCAXPD^ X-base, levelers, for 48” round or 42” sq top (38”x 38” spread) $702 Solano 4-Post X-Base with LevelersLCAXPE?^ 4-Post X-Base, levelers, for 54”-84” Round Top $1693LXPEF# Laminate Infill (no door) for LCAXPE $1043LXPENFD# Laminate Infill (with door) for LCAXPE $1217

Solano X-Bases with Levelers - Bar HeightLCAXPBBA^ X-base, bar height, levelers, for 24” round top (22” x 22” spread) $715LCAXPBBB^ X-base, bar height, levelers, for 30-36” round or 24” - 30” sq top $707 (26” x 26” spread) LCAXPBBC^ X-base, bar height, levelers, for 42” round or 36” sq top $742 (32” x 32” spread) LCAXPBBD^ X-base, bar height, levelers, for 48” round or 42” sq top $757 (38” x 38” spread)

Solano 4-Post X-Base with Levelers - Bar HeightLCAXPBE?^ 4-Post X-base, bar height, levelers, for 54”-72” round top $1793 (48” x 48” spread) LCAXPBEF# Laminate Infill (no door) for LCAXPBE (bar height) $1313LCAXPBENFD# Laminate Infill (with door) for LCAXPBE (bar height) $1530

Solano X-Bases with Casters LCAXPAC^@ X-base, casters, for 24” round top (22”x 22” spread) $771LCAXPBC^@ X-base, casters, for 30-36” round or 24”-30” sq top (26”x 26” spread) $785LCAXPCC^@ X-base, casters, for 42” round or 36” sq top (32”x 32” spread) $799LCAXPDC^@ X-base, casters, for 48” round or 42” sq top (38”x 38” spread) $814

Solano 4-Post X-Base with CastersLCAXPEC?^@ 4-Post X-Base, casters, for 54”-84” Round Top $1684


Solano X-Bases with Power/Data Top Plate and Levelers LCAX3PA^ X-Base w/ P/D Top Plate, Levelers, for 24” round top (22”x 22” spread) $769LCAX3PB^ X-Base w/ P/D Top Plate, Levelers, for 30”-36” round or 24”-30” sq top (26”x 26” spread) $783LCAX3PC^ X-Base w/ P/D Top Plate, Levelers, for 42” round or 36” sq top (32”x 32” spread) $798LCAX3PD^ X-Base w/ P/D Top Plate, Levelers, for 48” round or 42” sq top (38”x 38” spread) $809


Solano X-Bases with Power/Data Top Plate and Levelers - Bar Height LCAX3PBBA^ X-base w/ P/D Top Plate, bar height, levelers, for 24” round top (22”x 22” spread) $825LCAX3PBBB^ X-base w/ P/D Top Plate, bar height, levelers, for 30”-36” round or 24”-30” sq top (26”x 26” spread) $848LCAX3PBBC^ X-base w/ P/D Top Plate, bar height, levelers, for 42” round or 36” sq top (32”x 32” spread) $853LCAX3PBBD^ X-base w/ P/D Top Plate, bar height, levelers, for 48” round or 42” sq top (38” x 38” spread) $865


Solano X-Bases with Power/Data Top Plate and Casters LCAX3PAC^@ X-Base with P/D Top Plate, casters, for 24” round top (22”x 22” spread) $877LCAX3PBC^@ X-Base with P/D Top Plate, casters, for 30”-36” round or 24”-30” sq top (26”x 26” spread) $894LCAX3PCC^@ X-Base with P/D Top Plate, casters, for 42” round or 36” sq top (32”x 32” spread) $906LCAX3PDC^@ X-Base with P/D Top Plate, casters, for 48” round or 42” sq top (38”x 38”spread) $919


SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SOLA

NO

(SIN 711-9)

154

Notes

155

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SO

LAN

O

Notes

156

Notes

157

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SO

LAN

O

Notes

158

Notes

159

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SO

LAN

O

Notes

160

STEP 1

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium Laminates +$40 (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium (includes 58, +$55

43, MC, SP, and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates.




STEP 3




Solano Classroom Tables with Monitor Lift(s) and LevelersLCA2CM3030^# Classroom Table with Single Monitor Lift, 30"D x 30"W $3221 Tip: Works with most flat screens, 23” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace.

LCA2CM3036^# Classroom Table with Single Monitor Lift, 30"D x 36"W $3357 Tip: Works with most flat screens, 25” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately)

LCA2CM3060^# Classroom Table with Double Monitor Lift, 30"D x 60"W $5777 Tip: Works with most flat screens, 23” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace.

LCA2CM3072^# Classroom Table with Double Monitor Lift, 30"D x 72"W $5935 Tip: Works with most flat screens, 25” diagonal monitor or smaller. Maximum monitor weight is 20 lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately)

Monitor Lift Classroom Table Power Kits (Optional)L2CMP130 Kit for 30”W Classroom Table, 2 duplex receptacles, no data, $261 two jumpers, circuit 1L2CMP136 Kit for 36”W Classroom Table, 2 duplex receptacles, no data, $265 two jumpers, circuit 1L2CMP160 Kit for 60”W Classroom Table, 2 duplex receptacles, no data, $287 two jumpers, circuit 1L2CMP172 Kit for 72”W Classroom Table, 2 duplex receptacles, no data, $302 two jumpers, circuit 1 L2CMP230 Kit for 30”W Classroom Table, 2 duplex receptacles, no data, $261 two jumpers, circuit 2L2CMP236 Kit for 36”W Classroom Table, 2 duplex receptacles, no data, $265 two jumpers, circuit 2L2CMP260 Kit for 60”W Classroom Table, 2 duplex receptacles, no data, $287 two jumpers, circuit 2L2CMP272 Kit for 72”W Classroom Table, 2 duplex receptacles, no data, $302 two jumpers, circuit 2

Product Specifications: > Inner and outer back panels are steel> Tops are Laminate with a 3mm edge> Monitor lifts accept monitors that adhere to the VESA Mounting Standard> Contains storage for keyboards and mouse with monitor. Monitor storage is released by pushing down on top.> Includes a cable trough in the bottom for plug strips or hardwire power.> Includes cable management kit.

Ordering Information:> Worksurface included.> Ships assembled.> See maximum monitor sizes (diagonal measurement) below. For larger sizes email [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Solano Classroom Tables (Complete Tables) & Power Kits(formerly Captiva)

(SIN LISTED BELOW)

(SIN 711-9)

161(formerly Captiva)


Solano Classroom Tables with Single Laptop Storage and Powerlex ModestyLCALAP301^# Classroom Table w/ Powerlex, Single Laptop Storage, for 24”D x 30”W Tables, Circuit 1 $2663LCALAP302^# Classroom Table w/ Powerlex, Single Laptop Storage, for 24”D x 30”W Tables, Circuit 2 $2663

Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a "Z" in front of the part number.

Solano Classroom Tables with Double Laptop Storage and Powerlex ModestyLCALAP721^# Classroom Table w/ Powerlex, Double Laptop Storage, for 24”D x 72”W Tables, Circuit 1 $3716LCALAP722^# Classroom Table w/ Powerlex, Double Laptop Storage, for 24”D x 72”W Tables, Circuit 2 $3716

Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $300 from the list price and put a "Z" in front of the part number.




Tip: Classroom tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.


SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

SOLA

NO

(SIN 711-11)

(SIN 711-9)

(SIN LISTED BELOW)

(SIN 711-9)

162

(@) Filler Suffix List:A Open (No Filler) No ChargeB Acrylic Filler +$310C Glass Filler, acid-etched w/ pattern +$720

STEP 1

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, +$40 -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +$55 43, MC, SP and NT finishes) and Wilsonart

Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +$79






STEP 2

Product Specifications:> Thickness of Birch ply on base is 2.75”.

Ordering Information:> Bases include steel tube interior structure for cable management within the base.> Statement tops ordered separately. See pages 40-49.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1 W1 Part Number Description List Price (US$)

Laminate Statement Conference Table Bases with Exposed Plied Core and levelers (package of one)18 6 LK18LP@# 18” Base, Exposed Plied Core, for use on 36”/42”D table $159424 6 LK24LP@# 24” Base, Exposed Plied Core, for use on 48”D table $165430 6 LK30LP@# 30” Base, Exposed Plied Core, for use on 54”D table $171536 6 LK36LP@# 36” Base, Exposed Plied Core, for use on 60”D table $1775 Laminate (all sides) Statement Conference Table Bases with levelers (package of one) 18 6 LK18LA@# 18” Base, Laminate all sides, for use on 36”/42”D table $161224 6 LK24LA@# 24” Base, Laminate all sides, for use on 48”D table $167630 6 LK30LA@# 30” Base, Laminate all sides, for use on 54”D table $174136 6 LK36LA@# 36” Base, Laminate all sides, for use on 60”D table $1807

Veneer Statement Conference Table Bases with Exposed Plied Core and levelers (package of one)18 6 LK18VP@# 18” Base, Veneer w/ Exposed Plied Core, for use on 36”/42”D table $219124 6 LK24VP@# 24” Base, Veneer w/ Exposed Plied Core, for use on 48”D table $228030 6 LK30VP@# 30” Base, Veneer w/ Exposed Plied Core, for use on 54”D table $236936 6 LK36VP@# 36” Base, Veneer w/ Exposed Plied Core, for use on 60”D table $2457 Veneer (all sides) Statement Conference Table Bases with levelers (package of one) 18 6 LK18VA@# 18” Base, Veneer all sides, for use on 36”/42”D table $232324 6 LK24VA@# 24” Base, Veneer all sides, for use on 48”D table $242230 6 LK30VA@# 30” Base, Veneer all sides, for use on 54”D table $252036 6 LK36VA@# 36” Base, Veneer all sides, for use on 60”D table $2620

Statement™ Table Bases (SIN 711-11)

163

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

STA

TEM

ENT

164

(@) Filler List:A Flat Filler - Standard LaminateB Flat Filler - Standard Veneer

Tip: Fillers are aesthetic treatments on the front and back of panel bases.

STEP 1

STEP 2 (#) Laminate Suffix List: (Filler A Only) A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard (58, +$308 43, MC, SP and NT finishes) and Wilsonart

Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar +$332

Non-Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90



(#) Veneer Suffix List: (Filler B Only)D Maple (stained similar to Kensington



FLAT FILLER FLAT FILLER STANDARD STANDARD LAMINATE VENEER

Part Number Description Suffix A Suffix B

Stealth Base and Beam Assemblies for 36”/42”D Tables - Seated Height (29"H) LY36AA@# Seated Base Assembly for 36/42”D x 72” - 84”W table $4347 $5872LY36BA@# Seated Base Assembly for 36/42”D x 96”-108”W table $4617 $6142LY36CA@# Seated Base Assembly for 36/42”D x 120”W table $5321 $7429LY36DA@# Seated Base Assembly for 36/42”D x 132”W table $5321 $7429LY36EA@# Seated Base Assembly for 36/42”D x 144”W table $5321 $7429LY36FA@# Seated Base Assembly for 36/42”D x 156”W table $5321 $7429 LY36GA@# Seated Base Assembly for 36/42”D x 168/180/192”W table $8038 $10,527LY36HA@# Seated Base Assembly for 36/42”D x 204”-216”W table $8531 $11,016LY36IA@# Seated Base Assembly for 36/42”D x 228”-240”W table $8531 $11,016 Stealth Base and Beam Assemblies for 48”D Tables - Seated Height (29"H)LY48AA@# Seated Base Assembly for 48”D x 72”-84”W table $4617 $6796LY48BA@# Seated Base Assembly for 48”D x 96-108”W table $4781 $6961LY48CA@# Seated Base Assembly for 48”D x 120”W table $5321 $7429LY48DA@# Seated Base Assembly for 48”D x 132”W table $5321 $7429LY48EA@# Seated Base Assembly for 48”D x 144”W table $5321 $7429LY48FA@# Seated Base Assembly for 48”D x 156”W table $5321 $7429 LY48GA@# Seated Base Assembly for 48”D x 168/180/192”W $8038 $10,527LY48HA@# Seated Base Assembly for 48”D x 204-216”W table $8531 $11,016LY48IA@# Seated Base Assembly for 48”D x 228-240”W table $8531 $11,016

Stealth Base and Beam Assemblies for 54”D Tables - Seated Height (29"H) LY54AA@# Seated Base Assembly for 54”D x 72”-84”W table $5876 $7980LY54BA@# Seated Base Assembly for 54”D x 96-108”W table $6036 $8138LY54CA@# Seated Base Assembly for 54”D x 120”W table $6577 $8674LY54DA@# Seated Base Assembly for 54”D x 132”W table $6577 $8674LY54EA@# Seated Base Assembly for 54”D x 144”W table $6577 $8674LY54FA@# Seated Base Assembly for 54”D x 156”W table $6577 $8674 LY54GA@# Seated Base Assembly for 54”D x 168/180/192”W table $9884 $12,542LY54HA@# Seated Base Assembly for 54”D x 204-216”W table $10,298 $12,951LY54IA@# Seated Base Assembly for 54”D x 228-240”W table $10,298 $12,951

Stealth Base and Beam Assemblies for 60”D Tables - Seated Height (29"H) LY60AA@# Seated Base Assembly for 60”D x 72”-84”W table $5876 $7980LY60BA@# Seated Base Assembly for 60”D x 96-108”W table $6036 $8138LY60CA@# Seated Base Assembly for 60”D x 120”W table $6577 $8674LY60DA@# Seated Base Assembly for 60”D x 132”W table $6577 $8674LY60EA@# Seated Base Assembly for 60”D x 144”W table $6577 $8674LY60FA@# Seated Base Assembly for 60”D x 156”W table $6577 $8674 LY60GA@# Seated Base Assembly for 60”D x 168/180/192”W table $9884 $12,542LY60HA@# Seated Base Assembly for 60”D x 204-216”W table $10,298 $12,951LY60IA@# Seated Base Assembly for 60”D x 228-240”W table $10,298 $12,951

Stealth™ Conference Base & Beam Assemblies (SIN 711-11)

Product Specifications:> Trim is clear anodized aluminum.> Panel Bases are 5-3/16”W

Ordering Information:> Product is base and beam kit only. Table top specified separately.> Bases include cable management and cable grippers. > Trough covers are available to conceal equipment and hide wiring & cabling.

See chart on page 166. > Kit includes aluminum mitered structural cross beams.> Base and Beam kits ship partially assembled. > For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

COORDINATING FURNITURE See page 190 for

coordinating Stealth Credenzas.

165

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

STE

ALT

H

Notes

166

(@) Filler List:A Flat Filler - Standard Laminate B Flat Filler - Standard Veneer Tip: Fillers are aesthetic treatments on the front and back of panel bases.

STEP 1

STEP 2 (#) Laminate Suffix List: (Step 1: Filler A Only) A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +$308 43, MC, SP and NT finishes) and Wilsonart








COORDINATING FURNITURE See page 190 for coordinating

Stealth Credenzas.

*Stealth Sliding Trough covers for concealing

Power/Data under Stealth conference tables:

(Trough covers are 24"W)

^ Covers will overlap to completely cover gaps.

Max # of Trough Covers

1 or 2^

2 2 or 3^

2 or 3^

3 4 4 5^

5 6^

6 6 or 7^

7^

7^

8^

Top Width

728496

108120132144156168180192204216228240

FLAT FILLER FLAT FILLER STANDARD STANDARD LAMINATE VENEER

Part Number Description Suffix A Suffix B

Stealth Base and Beam Assemblies for 48”D Tables - Standing Height (42"H) LY48AB@# Standing Base Assembly for 48”D x 72”-84”W table $5316 $7640LY48BB@# Standing Base Assembly for 48”D x 96-108”W table $5481 $7803LY48CB@# Standing Base Assembly for 48”D x 120”W table $6020 $8338LY48DB@# Standing Base Assembly for 48”D x 132”W table $6020 $8338LY48EB@# Standing Base Assembly for 48”D x 144”W table $6020 $8338 Stealth Base and Beam Assemblies for 60”D Tables - Standing Height (42"H) LY60AB@# Standing Base Assembly for 60”D x 72”-84”W table $6576 $8889LY60BB@# Standing Base Assembly for 60”D x 96-108”W table $6736 $8961LY60CB@# Standing Base Assembly for 60”D x 120”W table $7208 $9492LY60DB@# Standing Base Assembly for 60”D x 132”W table $7208 $9492LY60EB@# Standing Base Assembly for 60”D x 144”W table $7208 $9492

Product Specifications:> Trim is clear anodized aluminum.> Panel Bases are 5 3/16”W

Ordering Information:> Product is base and Beam kit only. Table top specified separately.> Bases include cable management – inner panel that slides up/down and cable grippers. > Kit includes aluminum mitered structural cross beams.> Base and Beam kits ship partially assembled. > For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Stealth Conference Base & Beam Assemblies (SIN 711-11)

167

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

STEA

LTH

168

STEP 1 - Tables on This Page Only

(#) Laminate Suffix List: A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +$308 43, MC, SP and NT finishes) and Wilsonart








(@) Cable Management Suffix List:N No Cable Management No chargeG Grommet (one, center) +$19K One Power/Data Cut-out, Centered +$37C Two Power/Data Cut-outs +$74X Other TBD

STEP 2

Product Specifications:> Trim is clear anodized aluminum.> Acrylic dividers are 11”H.

Ordering Information:> Product numbers include entire table (e.g.: top, sides, structure). > Table Ships assembled. Power data unit and acrylic screens field installed. > Whiteboard laminate is not available on Stealth Team Tables. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Laminate Stealth Team Tables - 29" Seated HeightLYTL3672A@# Laminate Team Table, seated, 36”D x 72”W $5448LYTL3684A@# Laminate Team Table, seated, 36”D x 84”W $5779LYTL3696A@# Laminate Team Table, seated, 36”D x 96”W $5779 LYTL4272A@# Laminate Team Table, seated, 42”D x 72”W $6111LYTL4284A@# Laminate Team Table, seated, 42”D x 84”W $6441LYTL4296A@# Laminate Team Table, seated, 42”D x 96”W $6441 LYTL4872A@# Laminate Team Table, seated, 48”D x 72”W $6111LYTL4884A@# Laminate Team Table, seated, 48”D x 84”W $6441LYTL4896A@# Laminate Team Table, seated, 48”D x 96”W $6441

Veneer Stealth Team Tables - 29" Seated HeightLYTV3672A@# Veneer Team Table, seated, 36”D x 72”W $9217LYTV3684A@# Veneer Team Table, seated, 36”D x 84”W $9667LYTV3696A@# Veneer Team Table, seated, 36”D x 96”W $9667 LYTV4272A@# Veneer Team Table, seated, 42”D x 72”W $10,118LYTV4284A@# Veneer Team Table, seated, 42”D x 84”W $10,792LYTV4296A@# Veneer Team Table, seated, 42”D x 96”W $10,792 LYTV4872A@# Veneer Team Table, seated, 48”D x 72”W $10,118LYTV4884A@# Veneer Team Table, seated, 48”D x 84”W $10,792LYTV4896A@# Veneer Team Table, seated, 48”D x 96”W $10,792

Laminate Stealth Team Tables - 42" Standing Height LYTL3672B@# Laminate Team Table, standing, 36”D x 72”W $5999LYTL3684B@# Laminate Team Table, standing, 36”D x 84”W $6331LYTL3696B@# Laminate Team Table, standing, 36”D x 96”W $6331 LYTL4272B@# Laminate Team Table, standing, 42”D x 72”W $6662LYTL4284B@# Laminate Team Table, standing, 42”D x 84”W $6994LYTL4296B@# Laminate Team Table, standing, 42”D x 96”W $6994 LYTL4872B@# Laminate Team Table, standing, 48”D x 72”W $6662LYTL4884B@# Laminate Team Table, standing, 48”D x 84”W $6994LYTL4896B@# Laminate Team Table, standing, 48”D x 96”W $6994

Veneer Stealth Team Tables - 42" Standing Height LYTV3672B@# Veneer Team Table, standing, 36”D x 72”W $9780LYTV3684B@# Veneer Team Table, standing, 36”D x 84”W $10,231LYTV3696B@# Veneer Team Table, standing, 36”D x 96”W $10,231 LYTV4272B@# Veneer Team Table, standing, 42”D x 72”W $10,680LYTV4284B@# Veneer Team Table, standing, 42”D x 84”W $11,356LYTV4296B@# Veneer Team Table, standing, 42”D x 96”W $11,356 LYTV4872B@# Veneer Team Table, standing, 48”D x 72”W $10,680LYTV4884B@# Veneer Team Table, standing, 48”D x 84”W $11,356LYTV4896B@# Veneer Team Table, standing, 48”D x 96”W $11,356

Stealth Team Tables (Complete Tables) (SIN 711-11)

169


Laminate Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 29" Seated Height LYTL4872AP# Laminate Team Table, seated, 48”D x 72”W, with 4 power/4 data and Dividers $7674LYTL4884AP# Laminate Team Table, seated 48”D x 84”W, with 4 power/4 data and Dividers $8005LYTL4896AP# Laminate Team Table, seated 48”D x 96”W, with 4 power/4 data and Dividers $8005 Veneer Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 29" Seated Height LYTV4872AP# Veneer Team Table, seated, 48”D x 72”W, with 4 power/4 data and Dividers $11,711LYTV4884AP# Veneer Team Table, seated 48”D x 84”W, with 4 power/4 data and Dividers $12,387LYTV4896AP# Veneer Team Table, seated 48”D x 96”W, with 4 power/4 data and Dividers $12,387

Tip: Ellora is Clear Aluminum with Black Interior. For additional details, see page 169.

Laminate Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 42" Standing Height LYTL4872BP# Laminate Team Table, standing, 48”D x 72”W, with 4 power/4 data and Dividers $8226LYTL4884BP# Laminate Team Table, standing 48”D x 84”W, with 4 power/4 data and Dividers $8558LYTL4896BP# Laminate Team Table, standing 48”D x 96”W, with 4 power/4 data and Dividers $8558 Veneer Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 42" Standing Height LYTV4872BP# Veneer Team Table, standing, 48”D x 72”W, with 4 power/4 data and Dividers $12,274LYTV4884BP# Veneer Team Table, standing 48”D x 84”W, with 4 power/4 data and Dividers $12,951LYTV4896BP# Veneer Team Table, standing 48”D x 96”W, with 4 power/4 data and Dividers $12,951

Tip: Ellora is Clear Aluminum with Black Interior. For additional details, see page 169.

COORDINATING FURNITURE See page 190 for coordinating

Stealth Credenzas.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

STE

ALT

H

(SIN 711-11)

170

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller, put “XX”

in front and add $68 list. Double for 4-Post “X” Base. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is 42".

> Installation hardware included> All Value Legs are available in chrome except H Legs. See Step 1.> All value legs with casters use 2" casters. > For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STEP 1(^) Paint Suffix ListG Storm no chargeR Black no chargeS Silver no chargeT Medium Tone no chargeU Chrome (not available on H-legs) +$198W Arctic White no chargeZ Other



Value T-Legs with Levelers, package of two LTS182^ T-Leg, levelers, for 18”D table (16” spread) $484LTS242^ T-Leg, levelers, for 24”D table (22” spread) $490LTS302^ T-Leg, levelers, for 30”D or 36”D table (26” spread) $510 Value T-Legs on Casters, package of two LTSC182^ T-Leg, casters, for 18”D table (16” spread) $549LTSC242^ T-Leg, casters, for 24”D table (22” spread) $556LTSC302^ T-Leg, casters, for 30”D or 36”D table (26” spread) $574

Value Folding T-Leg Base Assembly with Levelers, package of two LTSF182^ Folding T-Leg, levelers, for 18”D table (16” spread) $843LTSF242^ Folding T-Leg, levelers, for 24”D table (22” spread) $904LTSF302^ Folding T-Leg, levelers, for 30”D or 36”D table (26” spread) $917

Tip: Folding T-Legs can be mounted on tables as short as 60” W.

Value Folding T-Leg Base Assembly with Casters, package of two LTSFC182^ Folding T-Leg, casters, for 18”D table (16” spread) $903LTSFC242^ Folding T-Leg, casters, for 24”D table (22” spread) $966LTSFC302^ Folding T-Leg, casters, for 30”D or 36”D table (26” spread) $979

Tip: Folding T-Legs can be mounted on tables as short as 60” W.

Value C-Legs with Levelers, package of two LCV182^ C-Leg, levelers, for 18”D table $492LCV242^ C-Leg, levelers, for 24”D table $498LCV302^ C-Leg, levelers, for 30”D table $509 Value C-Legs with Casters, package of two LCVC182^ C-Leg, casters, for 18”D table $558LCVC242^ C-Leg, casters, for 24”D table $565LCVC302^ C-Leg, casters, for 30”D table $576

Value TT-Legs with Levelers, package of one LTSD^ TT-Leg, levelers, for table up to 60”D (36” spread) $436

Value H-Legs, package of one LHA^ H-leg (14” spread) for 18-24”D table with 2” dia. Columns $282LHB^ H-Leg (20” spread) for 30-36”D table with 3” dia. Columns $303LHC^ H-Leg (24” spread) for 42-48”D table with 3” dia. Columns $412LHD^ H-Leg (30” spread) for 54-60”D table with 4” dia. Columns $833

Value Legs (SIN 711-11)

171


Value Column Legs for Peninsula, D-Top, Spanner and Jetty Worksurfaces - 3” diameter, package of one LCLMP^ Column Leg $148 Value Straight Legs - 2” diameter LPLE^ Straight Leg, leveler $118LPLE2^ Straight Leg, leveler, package of two $212 LPLEC^ Straight Leg, caster $129LPLEC2^ Straight Leg, caster, package of two $232

Value Folding Straight Legs, package of two LPLEF2^ Folding Straight Leg, leveler $448LPLECF2^ Folding Straight Leg, caster $464

Tip: For use on maximum table size of 30”x60” or 48”x48”. For larger tables specify heavy duty mechanism. Put “X” in front of the part number and add $300 to list price (package of 2).

Value Pin Adjustable Straight Legs LAPL̂ Pin Adjustable Straight Leg, leveler $308LAPL2^ Pin Adjustable Straight Leg, leveler, package of two $585 LAPLC^ Pin Adjustable Straight Leg, caster $320LAPLC2^ Pin Adjustable Straight Leg, caster, package of two $598

Tip: Adjusts 26”- 35” with one inch increments (including top). Value X-Bases with Levelers LXBA^ X-Base, levelers, for 24” round or 24” square table $432LXBB^ X-Base, levelers, for 30”-36” round or 30” square table $445LXBC^ X-Base, levelers, for 42” round or 36” square table $528LXBD^ X-Base, levelers, for 48” round or 42’’ square table $585

Value X-Bases with Casters LXBCA^ X-Base, casters, for 24” round or 24” square table $435LXBCB^ X-Base, casters, for 30”-36” round or 30” square table $446LXBCC^ X-Base, casters, for 42” round or 36” square table $553LXBCD^ X-Base, casters, for 48” round or 42” square table $581

Value Flip X-Bases on Casters LXFAC^ Flip X-Base, casters, for 24” round table $802LXFBC^ Flip X-Base, casters, for 30”-36” round or 24”-30” square table $818LXFCC^ Flip X-Base, casters, for 42” round or 36” square table $912LXFDC^ Flip X-Base, casters, for 48” round or 42” square table $948

Value 4-Post X-Base with Levelers LXBE^ 4-Post X-Base, levelers, for 54”-60” round or 48” square table $1072LXBF^ 4-Post X-Base, levelers, for 66’’-84’’ round table $1145

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TAB

LES

STEP

2 -

VA

LUE

(SIN 711-11)

(SIN 711-9)

(SIN LISTED BELOW)

172

(^) Paint Suffix List:G StormR BlackS SilverT Medium ToneW Arctic WhiteZ OtherTip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 4

(@) Accent Foot Trim Suffix List:N Standard Foot no chargeY Polished Aluminum Accent Trim +$150

STEP 2

STEP 1 (excludes folding legs)(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$64Z Routing holes in two legs +$128

(&) Caster Color Suffix List:B Black no chargeW White with Grey Trim no charge


Zori™ T-Legs


Zori T-Legs with Levelers, package of twoCYTSL182?@^ T-Leg, Levelers, for 18”D Table (18” spread) $515CYTSL242?@^ T-Leg, Levelers, for 24”D Table (22” spread) $520CYTSL302?@^ T-Leg, Levelers, for 30”D Table (28” spread) $544CYTSL362?@^ T-Leg, Levelers, for 36”D Table (34” spread) $574 Zori T-Legs with Casters, package of twoCYTSC182?@&^ T-Leg, Casters, for 18”D Table (18” spread) $566CYTSC242?@&^ T-Leg, Casters, for 24”D Table (22” spread) $597CYTSC302?@&^ T-Leg, Casters, for 30”D Table (28” spread) $618CYTSC362?@&^ T-Leg, Casters, for 36”D Table (34” spread) $648

Zori Folding T-Leg Base Assembly with Levelers, package of two CYTFSL182@^ Folding T-Leg, Levelers, for 18”D Table (18” spread) $982CYTFSL242@^ Folding T-Leg, Levelers, for 24”D Table (22” spread) $1044CYTFSL302@^ Folding T-Leg, Levelers, for 30-36”D Table (28” spread) $1058

Tip: Folding T-Legs can be mounted on tables as short as 60’’W Tip: Routing holes not available.

Zori Folding T-Leg Base Assembly with Casters, package of two CYTFSC182@&^ Folding T-Legs, Casters, for 18”D Table (18” spread) $1043CYTFSC242@&^ Folding T-Leg, Casters, for 24”D Table (22” spread) $1106CYTFSC302@&^ Folding T-Leg, Casters, for 30-36”D Table (28” spread) $1119

Tip: Folding T-Legs can be mounted on tables as short as 60’’W Tip: Routing holes not available.

Zori TT-Leg with Levelers, package of one CYTTSL42?@^ TT-Leg, Leveler, for 42-54”D table (36” spread) $543CYTTSL60?@^ TT-Leg, Leveler, for 60”D table (45” spread) $596 Tip: Split-Y Leg is another option, see page 185.

COORDINATING FURNITURE See page 213-220 for

coordinating Zori furniture.

(SIN 711-11)

Ordering Information:> Standard height is 27.75”. For shorter height T-Legs (only) put “X” in front of

the part number and add $118 list. For taller, put XX” in front and add $118 list. Maximum worksurface height is 42".

> Installation hardware is included.> Polished aluminum accent foot trim available. See Step 2.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

173

SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - Z

ORI


Zori 24”H T-Legs with Levelers, package of twoCYT24L182?@^ 24”H T-Leg, Levelers, for 18”D Table (18” spread) $515CYT24L242?@^ 24”H T-Leg, Levelers, for 24”D Table (22” spread) $520CYT24L302?@^ 24”H T-Leg, Levelers, for 30”D Table (28” spread) $544CYT24L362?@^ 24”H T-Leg, Levelers, for 36”D Table (34” spread) $574

Tip: Leg height includes 1.25” top. Zori 24”H T-Legs with Casters, package of twoCYT24C182?@^ 24”H T-Leg, Casters, for 18”D Table (18” spread) $566CYT24C242?@^ 24”H T-Leg, Casters, for 24”D Table (22” spread) $597CYT24C302?@^ 24”H T-Leg, Casters, for 30”D Table (28” spread) $618CYT24C362?@^ 24”H T-Leg, Casters, for 36”D Table (34” spread) $648

Tip: Leg height includes 1.25” top.

Zori 27”H T-Legs with Levelers, package of twoCYT27L182?@^ 27”H T-Leg, Levelers, for 18”D Table (18” spread) $515CYT27L242?@^ 27”H T-Leg, Levelers, for 24”D Table (22” spread) $520CYT27L302?@^ 27”H T-Leg, Levelers, for 30”D Table (28” spread) $544CYT27L362?@^ 27”H T-Leg, Levelers, for 36”D Table (34” spread) $574


Zori 27”H T-Legs with Casters, package of twoCYT27C182?@^ 27”H T-Leg, Casters, for 18”D Table (18” spread) $566CYT27C242?@^ 27”H T-Leg, Casters, for 24”D Table (22” spread) $597CYT27C302?@^ 27”H T-Leg, Casters, for 30”D Table (28” spread) $618CYT27C362?@^ 27”H T-Leg, Casters, for 36”D Table (34” spread) $648


Zori™ T-Legs for K-12 Education (SIN 711-11)

174

(&) Caster Color Suffix List:B Black no chargeW White w/ Grey Trim no charge

STEP 3


STEP 2

STEP 1(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ OtherTip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].


STEP 5






STEP 6


STEP 4

Zori Straight T-Leg Flip Tables (Complete Table)


3mm Edge Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 18”D CYRS1848A^?&@*# 18”D Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1196CYRS1860A^?&@*# 18”D Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1317CYRS1872A^?&@*# 18”D Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1361CYRS1884A^?&@*# 18”D Straight T-Leg Flip Table 84”W Top w/ 3mm Edge $1498CYRS1896A^?&@*# 18”D Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $1498 3mm Edge Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 24”D CYRS2448A^?&@*# 24”D Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1214CYRS2460A^?&@*# 24”D Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1332CYRS2472A^?&@*# 24”D Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1377CYRS2484A^?&@*# 24”D Straight T-Leg Flip Table 84”W Top w/ 3mm Edge $1512CYRS2496A^?&@*# 24”D Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $1512

3mm Edge Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 30”D CYRS3048A^?&@*# 30”D Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1290CYRS3060A^?&@*# 30”D Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1408CYRS3072A^?&@*# 30”D Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1462CYRS3084A^?&@*# 30”D Straight T-Leg Flip Table 84”W Top w/ 3mm Edge $1601CYRS3096A^?&@*# 30”D Straight T-Leg Flip Table 96”W Top w/ 3mm Edge $1601 3mm Edge Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 36”D CYRS3648A^?&@*# 36”D Straight T-Leg Flip Table 48”W Top w/ 3mm Edge $1390CYRS3660A^?&@*# 36”D Straight T-Leg Flip Table 60”W Top w/ 3mm Edge $1508CYRS3672A^?&@*# 36”D Straight T-Leg Flip Table 72”W Top w/ 3mm Edge $1562

Knife Edge (user side) Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 18”D CYRS1848K^?&@*# 18”D Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1281CYRS1860K^?&@*# 18”D Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1439CYRS1872K^?&@*# 18”D Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1496CYRS1884K^?&@*# 18”D Straight T-Leg Flip Table 84”W Top w/ Knife Edge User Side $1674CYRS1896K^?&@*# 18”D Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $1674 Knife Edge (user side)Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 24”D CYRS2448K^?&@*# 24”D Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1302CYRS2460K^?&@*# 24”D Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1454CYRS2472K^?&@*# 24”D Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1512CYRS2484K^?&@*# 24”D Straight T-Leg Flip Table 84”W Top w/ Knife Edge User Side $1689CYRS2496K^?&@*# 24”D Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $1689

Knife Edge (user side) Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 30”D CYRS3048K^?&@*# 30”D Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1397CYRS3060K^?&@*# 30”D Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1550CYRS3072K^?&@*# 30”D Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1620CYRS3084K^?&@*# 30”D Straight T-Leg Flip Table 84”W Top w/ Knife Edge User Side $1800CYRS3096K^?&@*# 30”D Straight T-Leg Flip Table 96”W Top w/ Knife Edge User Side $1800

Knife Edge (user side) Laminate worksurface on Zori T-Leg (straight) Flip Base on Casters, 36”D CYRS3648K^?&@*# 36”D Straight T-Leg Flip Table 48”W Top w/ Knife Edge User Side $1697CYRS3660K^?&@*# 36”D Straight T-Leg Flip Table 60”W Top w/ Knife Edge User Side $1850CYRS3672K^?&@*# 36”D Straight T-Leg Flip Table 72”W Top w/ Knife Edge User Side $1920

(SIN 711-11)

Product Specifications: > Angled leg flip tables nest in-line. Straight leg flip tables nest off-set. Nested, both leg styles have 7-1/2” between front of one table to front of the next table. > Straight foot depth is approximately 18” for 18”D flip tables, 22” for 24”D flip tables, and 28” for 30”D flip tables. > Table height is 29”H. Shorter height flip tables as low as 21”H are available upon request.

Ordering Information:> Installation hardware is included.> A special 7”H hinged modesty panel, or a narrower width, are recommended for use with 30” and 36”D Zori flip bases to


175


3mm Edge Laminate worksurface on Zori T-Leg (angled) Flip Base on CastersCYRA2460A^?&@*# T-Leg Flip Base, Angled Legs, 24”D x 60”W Lam Top w/ 3mm Edge $1388CYRA2472A^?&@*# T-Leg Flip Base, Angled Legs, 24”D x 72”W Lam Top w/ 3mm Edge $1433 CYRA3060A^?&@*# T-Leg Flip Base, Angled Legs, 30”D x 60”W Lam Top w/ 3mm Edge $1464CYRA3072A^?&@*# T-Leg Flip Base, Angled Legs, 30”D x 72”W Lam Top w/ 3mm Edge $1518

Knife Edge (user side) Laminate worksurface on Zori T-Leg (angled) Flip Base on CastersCYRA2460K^?&@*# T-Leg Flip Base, Angled Legs, 24”D x 60”W Lam Top w/ Knife Edge User Side $1511CYRA2472K^?&@*# T-Leg Flip Base, Angled Legs, 24”D x 72”W Lam Top w/ Knife Edge User Side $1568 CYRA3060K^?&@*# T-Leg Flip Base, Angled Legs, 30”D x 60”W Lam Top w/ Knife Edge User Side $1606CYRA3072K^?&@*# T-Leg Flip Base, Angled Legs, 30”D x 72”W Lam Top w/ Knife Edge User Side $1676

Zori Angled T-Leg Flip Tables (Complete Table)

SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - Z

ORI

(SIN 711-11)

Product Specifications: > Angled leg flip tables nest in-line. Straight leg flip tables nest off-set. Nested, both leg styles have

7-1/2” between front of one table to front of the next table. > Angled foot depth is approximately 17” for 18”D flip tables, 21” for 24”D flip tables, and 27” for 30”D flip tables. > Table height is 29”H. Shorter height flip tables as low as 21”H are available upon request.

Ordering Information:> Installation hardware is included.> A special 7”H hinged modesty panel, or a narrower width, are recommended for use with 30”D Zori flip bases to


176

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ OtherTip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 4



Zori Straight Legs, X-Bases, & C-Legs Patent Pending

(@) Accent Foot Trim Suffix List:N Standard Foot no chargeY Polished Aluminum +$**

Accent TrimTip: Accent trim can be painted. Contact [email protected] for a quote.** Pricing not available at time of printing. Please consult latest electronic version on www.enwork.com or consult your CAP electronic catalog.

STEP 3

STEP 1 - C-Legs, 4- and 6-Post X, and Straight Legs Only(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$64Z Routing hole in two legs +$128



(SIN 711-11)

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and

add $118 list. For taller, put “XX” in front and add $118 list. See below for 4-Post “X” Base and 6-Post Hex Base. Excludes straight leg package of 1 and package of 4. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum accent foot trim is available. See Step 3.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Zori X-Bases with Levelers CYXSLF@^ X-Base, levelers, for 24” round table (17” x 17” spread) $544CYXSLG@^ X-Base, levelers, for 30-36” round or 24-30” square table (21” x 21” spread) $567CYXSLH@^ X-Base, levelers, for 42” round or 36” square table (27” x 27” spread) $579CYXSLJ@^ X-Base, levelers, for 48” round or 42” square table (33” x 33” spread) $595

Zori X-Bases with Levelers and Power/Data Top Plate CYXSLA@^ X-Base, levelers, for 24” round table (17” x 17” spread) $564CYXSLB@^ X-Base, levelers, for 30-36” round or 24-30” square table (21” x 21” spread) $587CYXSLC@^ X-Base, levelers, for 42” round or 36” square table (27” x 27” spread) $599CYXSLD@^ X-Base, levelers, for 48” round or 42” square table (33” x 33” spread) $615 Tip: Includes top plate that accepts power/data unit.

Zori X-Bases with Casters CYXSCA&@^ X-Base, casters, for 24” round table (17” x 17” spread) $601CYXSCB&@^ X-Base, casters, for 30-36” round or 24-30” square table (21” x 21” spread) $620CYXSCC&@^ X-Base, casters, for 42” round or 36” square table (27” x 27” spread) $634CYXSCD&@^ X-Base, casters, for 48” round or 42” square table (33” x 33” spread) $650

Zori X-Bases with levelers - Bar HeightCYXBLA@ ̂ X-Base, bar height, levelers, for 24” round table (17” x 17” spread) $615CYXBLB@ ̂ X-Base, bar height, levelers, for 30-36” round or 24”-30” square table (21” x 21” spread) $637CYXBLC@ ̂ X-Base, bar height, levelers, for 42” round or 36” square table (27” x 27” spread) $649CYXBLD@ ̂ X-Base, bar height, levelers, for 48” round or 42” square table (33” x 33” spread) $666

Zori X-Bases with Levelers and Power/Data Top Plate - Bar HeightCYXPDBLA@ ̂ X-Base, bar height, levelers, for 24” round table (17” x 17” spread) $665CYXPDBLB@ ̂ X-Base, bar height, levelers, for 30-36” round or 24”-30” square table (21” x 21” spread) $687CYXPDBLC@ ̂ X-Base, bar height, levelers, for 42” round or 36” square table (27” x 27” spread) $699CYXPDBLD@ ̂ X-Base, bar height, levelers, for 48” round or 42” square table (33” x 33” spread) $716

Zori Flip X-Bases on Casters CYFXSCA@&^ Flip X-Base, casters, for 24” round table (17” x 17” spread) $867CYFXSCB@&^ Flip X-Base, casters, for 30-36” round table (21” x 21” spread) $882

Zori 4-Post X-Bases on Levelers CY4XSLA?@^ 4-Post X-Base, levelers, for 60” round/hexagon or 48” square table (39” x 39” spread) $998CY4XSLB?@^ 4-Post X-Base, levelers, for 72”-84” 2-piece round table (47” x 47” spread) $1140 Tip: For shorter heights put “X” in front of the part number and add $236 list. For taller, put “XX” in front and add $236 list.

Zori 6-Post Hex-Bases on Levelers CY6XSLA?@^ 6-Post Hex-Base, levelers, for 96”-108” round table (74” x 87” spread) $1497CY6XSLB?@^ 6-Post Hex-Base, levelers, for 120” round and hexagon table (87” x 103” spread) $1710

Tip: For shorter heights put “X” in front of the part number and add $354 list. For taller, put “XX” in front and add $354 list.

177

SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - Z

ORI

(SIN 711-11)Part Number Description List Price (US$)

Zori C-Legs with Levelers, package of two CYCSL242?@^ C-Leg, levelers, for 24”D table (23” spread) $520CYCSL302?@^ C-Leg, levelers, for 30”D table (26” spread) $544

Zori C-Legs with Casters, package of two CYCSC242?&@^ C-Leg, caster, for 24”D table (23” spread) $597CYCSC302?&@^ C-Leg, caster, for 30”D table (26” spread) $618

Zori 24”H C-Legs with Levelers, package of two CYC24L242?@^ 24”H C-Leg, levelers, for 24”D table (23” spread) $520CYC24L302?@^ 24”H C-Leg, levelers, for 30”D table (26” spread) $544

Tip: Leg height includes 1.25” top. Zori 24”H C-Legs with Casters, package of two CYC24C242?&@^ 24”H C-Leg, caster, for 24”D table (23” spread) $597CYC24C302?&@^ 24”H C-Leg, caster, for 30”D table (26” spread) $618


Zori 27”H C-Legs with Levelers, package of two CYC27L242?@^ 27”H C-Leg, levelers, for 24”D table (23” spread) $520CYC27L302?@^ 27”H C-Leg, levelers, for 30”D table (26” spread) $544

Tip: Leg height includes 1.25” top. Zori 27”H C-Legs with Casters, package of two CYC27C242?&@^ 27”H C-Leg, caster, for 24”D table (23” spread) $597CYC27C302?&@^ 27”H C-Leg, caster, for 30”D table (26” spread) $618


Zori Straight Legs with levelersCYSSL?@^ Straight Leg, leveler $118CYSSL2?@^ Straight Leg, leveler, package of two $219CYSSL4?@^ Straight Leg, leveler, package of four $424

Zori Straight Legs with locking casters CYSSC?&@^ Straight Leg, caster $131CYSSC2?&@^ Straight Leg, caster, package of two $244CYSSC4?&@^ Straight Leg, caster, package of four $472

Zori 24”H Straight Legs with levelersCYS24L?@^ 24”H Straight Leg, leveler $118CYS24L2?@^ 24”H Straight Leg, leveler, package of two $219CYS24L4?@^ 24”H Straight Leg, leveler, package of four $424


Zori 24”H Straight Legs with locking casters CYS24C?&@^ 24”H Straight Leg, caster $131CYS24C2?&@^ 24”H Straight Leg, caster, package of two $244CYS24C4?&@^ 24”H Straight Leg, caster, package of four $472


Zori 27”H Straight Legs with levelersCYS27L?@^ 27”H Straight Leg, leveler $118CYS27L2?@^ 27”H Straight Leg, leveler, package of two $219CYS27L4?@^ 27”H Straight Leg, leveler, package of four $424


Zori 27”H Straight Legs with locking casters CYS27C?&@^ 27”H Straight Leg, caster $131CYS27C2?&@^ 27”H Straight Leg, caster, package of two $244CYS27C4?&@^ 27”H Straight Leg, caster, package of four $472


Straight Leg Cross SectionDescription: 3 flats at 120-degree angles with three rounded sides at 120 dgrees.

178

(&) Accent Foot Trim Suffix List:N Standard Foot no chargeY Polished Aluminum +$150

Accent Trim

STEP 3

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ OtherTip: Polished aluminum feet (not columns) are available at no charge. This creates a two-tone color scheme. Free form “Polished Feet” on your order and put a “Z” in front of the part number.Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 4

(@) Caster Color Suffix List:B Black no chargeW White with Grey Trim no charge




Zori Y-Legs with Levelers, package of two CYYSL182?@^ Y-Leg, levelers, for 18”D table (15” spread) $532CYYSL242?@^ Y-Leg, levelers, for 24”D table (19” spread) $546CYYSL302?@^ Y-Leg, levelers, for 30”D table (24” spread) $557

Zori Y-Legs with Casters, package of two CYYSC182?@&^ Y-Leg, casters, for 18”D table (15” spread) $578CYYSC242?@&^ Y-Leg, casters, for 24”D table (19” spread) $608CYYSC302?@&^ Y-Leg, casters, for 30”D table (24” spread) $630

Zori Y-Legs Patent Pending (SIN 711-11)

Ordering Information:> Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $118 list. For taller, put “XX” in

front and add $118 list. Maximum worksurface height is 42".> Installation hardware is included.> Polished aluminum accent foot trim is available. See Step 3.> For number of bases required per table size and recommended base locations, see page 24-25.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

179

(&) Caster Color Suffix List:B Black no chargeW White w/ Grey Trim no charge

STEP 3

(?) Routing Hole Suffix List:N No routing hole in leg no chargeY Routing hole in one leg +$64Z Routing hole in two legs +$128

STEP 2



STEP 5






STEP 6


STEP 4


3mm Edge Laminate worksurface on Zori Y-Leg Flip Base on Casters, 18”D CYRY1860A^?&@*# 18”D Zori Y-Leg Flip Table 60”W Top w/ 3mm Edge $1387CYRY1872A^?&@*# 18”D Zori Y-Leg Flip Table 72”W Top w/ 3mm Edge $1433



Knife Edge (user side) Laminate worksurface on Zori Y-Leg Flip Base on Casters, 18”D CYRY1860K^?&@*# 18”D Zori Y-Leg Flip Table 60”W Top w/ Knife Edge User Side $1515CYRY1872K^?&@*# 18”D Zori Y-Leg Flip Table 72”W Top w/ Knife Edge User Side $1575



Zori Y-Leg Flip Tables (Complete Tables) Patent Pending

STEP 1 SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - Z

ORI

(SIN 711-11)

Product Specifications: > Y-Leg Flip Tables do not nest in-line.> Table height is 29”H. Shorter height flip tables as low as 21”H available upon request.

Ordering Information:> Installation hardware is included.> A special 7”H hinged modesty panel, or a narrower width, are recommended for use with 30”D Zori flip bases

to avoid potential paint scratches on the feet. Contact [email protected] for more details.> Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

180


STEP 3

STEP 1(?) Routing Holes Suffix ListN No routing holes in column no chargeR Routing hole in one column +$64

(center of table) T Routing hole in one column +$64

(end of table) U Routing hole in two columns +$128

(end of table)


Accent Trim

STEP 2


Zori Y-Leg Base with Footer Bar and Levelers, for 36"D Tables - base spread 22" CYYBSL3672?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 72” top $1054CYYBSL3684?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 84” top $1083CYYBSL3696?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 36” x 96” top $1116

Zori Y/T/Y-Leg Base with Footer Bar and Levelers, for 36”D Tables CYYBSL36108?&^ Y/T/Y-Leg w/ Footer Bar, levelers, for 36” x 108” top $1491CYYBSL36120?&^ Y/T/Y-Leg w/ Footer Bar, levelers, for 36” x 120” top $1521CYYBSL36132?&^ Y/T/Y-Leg w/ Footer Bar, levelers, for 36” x 132” top $1551CYYBSL36144?&^ Y/T/Y-Leg w/ Footer Bar, levelers, for 36” x 144” top $1581

Zori Y-Leg Base with Footer Bar and Levelers, for 42"D Tables - base spread 27.5" CYYBSL4272?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 72” top $1093CYYBSL4284?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 84” top $1124CYYBSL4296?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 42” x 96” top $1154

Zori Y/T/Y-Leg Base with Footer Bar and Levelers, for 42”D Tables CYYBSL42108?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 42” x 108 top $1550CYYBSL42120?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 42” x 120 top $1580CYYBSL42132?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 42” x 132 top $1610CYYBSL42144?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 42” x 144 top $1640

Zori Y-Leg Base with Footer Bar and Levelers, for 48"D Tables - base spread 27.5" CYYBSL4872?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 72” top $1093CYYBSL4884?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 84” top $1124CYYBSL4896?&^ Y-Legs (includes two) w/ Footer Bar, levelers, for 48” x 96” top $1154

Zori Y/T/Y-Leg Base with Footer Bar and Levelers, for 48”D Tables CYYBSL48108?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 48” x 108 top $1550CYYBSL48120?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 48” x 120 top $1580CYYBSL48132?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 48” x 132 top $1610CYYBSL48144?&^ Y/T/Y-Leg w/ Rect. Footer Bar, levelers, for 48” x 144 top $1640

Zori Conference Y-Bases Patent Pending

Y-Leg Base w/ Footer Bar

Y/T/Y-Leg Base w/ Footer Bar



(SIN 711-11)

Ordering Information:> Standard height is 27.75”. > Ships partially assembled. > Installation hardware is included.> Polished aluminum accent foot trim is available. See Step 2.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

181


STEP 3

(?) Routing Holes Suffix ListN No routing holes in column no chargeR Routing hole in one column +$64

(center of table) S Routing hole in two columns +$128 (center of table) T Routing hole in one column +$64

(end of table)


Accent Trim

STEP 2 Part Number Description List Price (US$)

Zori Split Y-Leg Base with Levelers, package of two CYYESL482?&^ Split Y-Leg for 48”D table, levelers, pkg of two $1161CYYESL602?&^ Split Y-Leg for 60”D table, levelers, pkg of two $1220


Zori Split Y-Leg Base with Rectangular Footer Bar and Levelers, for 48”-60”D Tables CYYDSL72?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 72”W top $2200CYYDSL84?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 84”W top $2250CYYDSL96?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 96”W top $2289

CYYDSL108?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 108”W top $2801CYYDSL120?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 120”W top $2801CYYDSL132?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 132”W top $2895CYYDSL144?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 144”W top $2965CYYDSL156?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 156”W top $3093CYYDSL168?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 168”W top $3093CYYDSL180?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 180”W top $4035CYYDSL192?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 192”W top $4139

CYYDSL204?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 204”W top $4139CYYDSL216?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 216”W top $4267CYYDSL228?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 228”W top $4331CYYDSL240?&^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 240”W top $4331

STEP 1

STEP 2

SUPPORT FURNITURE

ACCESSORIES

TOPS

POWER DATA

BASES

TABL

ES S

TEP

2 - Z

ORI

Split Y-Leg Base w/ TT-Leg and Rectangular Footer Bar

(for 1-, 2-, and 3-piece top as shown from left to right)

Split Y-Leg Base w/ Levelers

(SIN 711-11)

Ordering Information:> Installation hardware is included.> Polished aluminum accent foot trim is available. See Step 2.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

182

Step 1 – Determine the number of power outlets needed. Based on the size of the table and type of space, determine how many users might need power.

Tip: If the table will be used continuously for long periods of time, users will need to plug in their laptops. If so, a higher number of outlets may be needed.

Step 2 – Determine the number and type of datacom connections needed.Which systems require physical connections? If the room or facility has a wireless network, fewer will be needed.

Step 3 – Determine which Power/Data unit best fits your requirements. Use the Conference and Training/Teaming charts as well as the detailed assembly descriptions in this Price List to compare capabilities and features. Be sure to review the datacom options available for each assembly.

Data Options - Each unit is marked with an or to identify the category of datacom options available. Both types can meet most needs, but if you have diverse or unusual needs, assemblies with a have a wider variety of options available.

: Power/Data units in this category come standard with data openings and a Voice/Data Adapter kit. Adapters from the kit are used to install jacks or couplers (ordered separately from Enwork or supplied by the customer) into the data openings of the power/data unit. Voice/data options are punch down. Audio/video options are inline.

: Power/Data units in this category come standard with datacom plate openings. Datacom plates must be ordered from Enwork or openings can be left empty. Datacom plates can be configured to include multiple voice, data, audio and video solutions. Voice/data options are punch down. Audio/video options are inline.

Tip: Two or more smaller units can provide better user access on longer conference tables. When using multiple units, it is often easier and more convenient if power cords can be combined. Some assemblies can be daisy-chained together under the table. In other cases a UL listed power strip under the top or hidden in a base becomes the consolidation point, reducing the number of cords that need to be routed to the floor.

Tip: Some units are one-sided, others are two-sided. For the same number of outlets, a single two-sided unit will be lower cost than two one-sided units.

Tip: Be sure you understand how power and cabling will be routed from the building into the space and to the table(s).

Tip: To select an appropriate in-feed, determine if power will be coming from an outlet or hard-wired to the building. Hardwiring also allows the possibility of multi-circuit power within a table or series of interconnected tables. Note that only some units can be hardwired.

Tip: If power needs to run from one table to the next, look for units that can be daisy-chained. If connected tables will be re-configured into alternate set-ups, then units with non-sequential daisy-chaining are often the best solution.

We make it easy to choose the right Power/Data assembly, assuring you have a highly functional yet cost effective solution. With a little bit of planning, empowering a table or a large training room can be simple – usually without the added complexity and expense of a technology integrator. Listed below are planning tips to help assure an impressive, productive installation.

Choosing Power, Data, & Telecom Solutions

183

Step 4 – Determine the location and orientation of the Power/Data units in the table top. The position of units in a table is important because it affects both access from different seating positions as well as the ease with which power and data can be routed from the building into the table.

Tip: For smaller tables, a single unit in the center is the most common solution. For tables longer than 96”, multiple and/or two-sided units provide more convenient user access.

Tip: One-sided units typically open towards the end of a table. Two-sided units typically open towards the long sides of a table.

Tip: Multiple units are often spaced equally along the length of the table or positioned near the ends of the table, typically 20-24” in from the edge.

Tip: Positioning one or more units just next to legs or bases usually makes it easier to keep everything hidden. Placing assemblies directly over legs or bases requires special attention to assure there is no physical interference - contact [email protected].

Tip: Refer to the Conference Table Power/Data Standard Cut-outs page in this Price List to see different positioning options.

Step 5 – Don’t forget to order accessories Cable Grippers, Cable Managers, and other accessories help keep all the wires and cables organized and out of sight. See page 176 for available options.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

184

Choosing Power, Data, & Telecom Solutions

Product* Door/Case # Power Daisy-Chaining Hardwire # Datacom Datacom USB Charging Key Features Material Outlets Available Option Ports Options Available and Descriptions

Clamp-on Axil X Aluminum 2 N Special 1 or 2 Y Clamp on convenience and flexible 6’ power cord, longer

NEW Cove Aluminum 2 Y Special 0 NA Y Surface mounted power and charging USB perfect for retrofit projects. cords available.

Ellora, Aluminum 2 Special Special 2 Y Great aesthetics. Flush fit door with Single-Sided cable drop space. Available with pre-wired dual charging USBs in one or more Datacom ports.

Best Seller Flip-n-Go Steel 2 Y Special 1 Multi-option N Popular choice for multiple mobile Plate table applications. Flush-fit doors with cable drop space. Convenience Outlet on bottom. 6' or 9' power cord. Includes 15A 125V circuit breaker for overload protection.

NEW Node Die-Cast Zinc 1 or 2 N N 0 Y Clean, flush mount design. Fits 1.25”- (Specials Only) 1.5” tops. 2 amp stacked USB charging available. 6’ 15 amp power cord.

Specialty Powerlex Impression 4 Y Y 4 N Power integration below the Modesty Panel work surface. Non-sequential Daisy Chaining.

New Satellite Steel 1 or 2 Y 1 or 2 Y Ideal for day 2 updates to existing Undersurface tables. Available with angled or Mount rounded aesthetic.

Best Seller Villa, Corded Steel 2 Y Special 0 or 2 RJ-45 CAT6 Y Popular low cost choice for multiple mobile table applications. Convenience Outlet on bottom. Only data option is two RJ-45 CAT6 only punch-downs.

Specialty CHI, NYC, SF, See Price List or contact [email protected]

* Go to www.enwork.com for additional information

Training, Teaming, and Workstation Applications

185

Product* Door/Case # Power Daisy-Chaining Hardwire # Datacom Datacom USB Charging Key Features Material Outlets Available Option Ports Options Available and Descriptions

Alexander Linear, Aluminum 4, 6 or 8 N Special 4 or 6 Special Modern long rectangular shape Double-Sided aesthetics with pop-up doors. Two 10' cords.

Best Seller Ellora, Aluminum 4, 6 or 8 Y Special 4 or 6 Y Aesthetics. Flush fit door with Double-Sided cable drop space. Available with pre-wired dual charging USBs in one or more Datacom ports. Sequential Daisy-Chaining is optional.

Flip-n-Go Steel 2 Y Y 1 Multi-option N Popular choice for multiple mobile Plate table applications. Flush-fit doors with cable drop space. Convenience Outlet on bottom. 6’ or 9’ power cord. Includes 15A 125V circuit breaker for overload protection.

Specialty Foundation Veneer, 3-27 Y Y 1-9 Multi-option N Doors lay flat when open. Power Trough Kit Laminate or Plate @ Data varies by table size. Aluminum

New PowerEdge Steel 4-16* NA Y 0-8* Y Complete top with integrated power data recessed 2” from edge. Choices include power, stacked *Depending on table size and option choices USB charging, and data.

Oasis 30" Steel 12 Y Y 4 Multi-option Special The most substantial solution Plates for conference applications. Retracting doors.

Best Seller Oasis 15" Steel 6 Y Y 2 Multi-option Y Great flexibility. Retracting doors Plates flush with surface. 9' power cord.

New Satellite Steel 1 or 2 Y 1 or 2 Y Ideal for day 2 updates to existing Undersurface tables. Available with angled or Mount rounded aesthetic.

Specialty CHI, NYC, SF, See Price List or contact [email protected]

Conference Applications SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

186

Ordering Information:> For product features and capability comparison, see page 166-167. > For details and pricing of features listed under the “Additional Specials” section of a product, email designteam@

enwork.com.> Data options for and can be found on page 174-175. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Power & Data

Part Number Cut-Out Size List Price (US$)

Alexander™ Data Options: Cord/Hardwire: 10' power cord Features: 15 amp capability, modern aesthetic Additional Specials: Hardwired power, Longer cords, additional openings Material: Anodized aluminum

Alexander Linear Double-Sided Power/Data Assembly with two 10' power cords PDL22A Alexander Linear, 4 power/4 data openings, Clear Anodized Aluminum 4.0” x 16.19” $1236PDL22R Alexander Linear, 4 power/4 data openings, Black Anodized Aluminum 4.0” x 16.19” $1608 PDL33A Alexander Linear, 6 power/6 data openings, Clear Anodized Aluminum 4.0” x 22.19” $1353PDL33R Alexander Linear, 6 power/6 data openings, Black Anodized Aluminum 4.0” x 22.19” $2276 PDL44A Alexander Linear, 8 power/2 circuit breakers/6 data openings, Clear Anodized Aluminum 4.0” x 28.19” $1675PDL44R Alexander Linear, 8 power/2 circuit breakers/6 data openings, Black Anodized Aluminum 4.0” x 28.19” $2167

Axil-X™ Data Options: Cord/Hardwire: 6' power cord Features: Clamps to any worksurface, 15amp Additional Specials: Longer cords, different number of openings Material: Anodized aluminum

Axil-X Clamp-On Power/Data Assembly with 6' power cordPDAX22R Axil-X Clamp-on, 2 power/2 data openings, Black $479PDAX22S Axil-X Clamp-on, 2 power/2 data openings, Silver $365PDAX22W Axil-X Clamp-on, 2 power/2 data openings, White $365 PDAX21UR Axil-X Clamp-on, 2 power/1 data opening/2 charging USB (stacked), Black $604PDAX21US Axil-X Clamp-on, 2 power/1 data opening/2 charging USB (stacked), Silver $489PDAX21UW Axil-X Clamp-on, 2 power/1 data opening/2 charging USB (stacked), White $489

(SIN 711-2)

187

Part Number Cut-Out Size List Price

Ellora™ Data Options: Cord: 6' (Single), 10' (Double) Features: Flush fit doors with cable drop space Additional Specials: Pre-installed voice/data, different configurations Material: Anodized aluminum

Ellora Single-Sided Power/Data Assemblies with 6' power cordPDE22AW Ellora Single, 2 pwr/2 data openings, Clear Aluminum w/ White Interior 5.0” x 8.0” $636PDE22AR Ellora Single, 2 pwr/2 data openings, Clear Aluminum w/ Black Interior 5.0” x 8.0” $636PDE22RR Ellora Single, 2 pwr/2 data openings, Black Aluminum w/ Black Interior 5.0” x 8.0” $827 PDE212AW Ellora Single, 2 pwr/1 data opening/2 charging USB, Clear Aluminum w/ White Interior 5.0” x 8.0” $768PDE212AR Ellora Single, 2 pwr/1 data opening/2 charging USB, Clear Aluminum w/ Black Interior 5.0” x 8.0” $768PDE212RR Ellora Single, 2 pwr/1 data opening/2 charging USB, Black Aluminum w/ Black Interior 5.0” x 8.0” $959

Ellora Double-Sided Power/Data Assemblies with two 10' power cordsPDE44AW Ellora Double, 4 pwr/4 data openings, Clear Aluminum w/ White Interior 9.81” x 8.0” $1140PDE44AR Ellora Double, 4 pwr/4 data openings, Clear Aluminum w/ Black Interior 9.81” x 8.0” $1140PDE44RR Ellora Double, 4 pwr/4 data openings, Black Aluminum w/ Black Interior 9.81” x 8.0” $1473 PDE424AW Ellora Double, 4 pwr/2 data openings/4 charging USB, Clear Aluminum w/ White Interior 9.81” x 8.0” $1406PDE424AR Ellora Double, 4 pwr/2 data openings/4 charging USB, Clear Aluminum w/ Black Interior 9.81” x 8.0” $1406PDE424RR Ellora Double, 4 pwr/2 data openings/4 charging USB, Black Aluminum w/ Black Interior 9.81” x 8.0” $1615 PDE66AW Ellora Double, 6 pwr/6 data openings, Clear Aluminum w/ White Interior 9.81” x 11.0” $1271PDE66AR Ellora Double, 6 pwr/6 data openings, Clear Aluminum w/ Black Interior 9.81” x 11.0” $1271PDE66RR Ellora Double, 6 pwr/6 data openings, Black Aluminum w/ Black Interior 9.81” x 11.0” $1643 PDE644AW Ellora Double, 6 pwr/4 data openings/4 charging USB, Clear Aluminum w/ White Interior 9.81” x 11.0” $1519PDE644AR Ellora Double, 6 pwr/4 data openings/4 charging USB, Clear Aluminum w/ Black Interior 9.81” x 11.0” $1519PDE644RR Ellora Double, 6 pwr/4 data openings/4 charging USB, Black Aluminum w/ Black Interior 9.81” x 11.0” $2276 PDE88AW Ellora Double, 8 pwr/2 circuit breakers/6 data openings, Clear Aluminum w/ White Interior 9.81” x 14.0” $1588PDE88AR Ellora Double, 8 pwr/2 circuit breakers/6 data openings, Clear Aluminum w/ Black Interior 9.81” x 14.0” $1588PDE88RR Ellora Double, 8 pwr/2 circuit breakers/6 data openings, Black Aluminum w/ Black Interior 9.81” x 14.0” $2052 PDE834AW Ellora Double, 8 pwr/2 circuit breakers/4 data openings/4 charging USB, Clear Aluminum w/ White Interior 9.81” x 14.0” $1850PDE834AR Ellora Double, 8 pwr/2 circuit breakers/4 data openings/4 charging USB, Clear Aluminum w/ Black Interior 9.81” x 14.0” $1850PDE834RR Ellora Double, 8 pwr/2 circuit breakers/4 data openings/4 charging USB, Black Aluminum w/ Black Interior 9.81” x 14.0” $2284

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

(SIN 711-2) (SIN 711-2)

188

Power & DataOrdering Information:> For product features and capability comparison, see page 166-167. > For details and pricing of features listed under the “Additional Specials” section of a product, email designteam@

enwork.com.> Data options for and can be found on page 174-175. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Part Number Cut-Out Size List Price (US$)

Ellora™ Data Options: Cord: n/a (jumpers and infeeds ordered separately, below) Features: Flush fit doors with cable drop space Additional Specials: Pre-installed voice/data, different configurations Material: Anodized aluminum

Ellora Daisy Chain Double-sided Power/Data Assemblies with two 12" Harnesses and "H" Block, Clear Aluminum w/ Black InteriorCircuit 1PDE44ARDC1 Ellora Daisy Chain, Circuit 1, 4 power/4 data openings 9.81” x 8.0” $1201PDE424ARDC1 Ellora Daisy Chain, Circuit 1, 4 power/2 data openings/4 charging USB 9.81” x 8.0” $1465PDE66ARDC1 Ellora Daisy Chain, Circuit 1, 6 power/6 data openings 9.81” x 11.0” $1332PDE644ARDC1 Ellora Daisy Chain, Circuit 1, 6 power/4 data openings/4 charging USB 9.81” x 11.0” $1597

Circuit 2PDE44ARDC2 Ellora Daisy Chain, Circuit 2, 4 power/4 data openings 9.81” x 8.0” $1201PDE424ARDC2 Ellora Daisy Chain, Circuit 2, 4 power/2 data openings/4 charging USB 9.81” x 8.0” $1465PDE66ARDC2 Ellora Daisy Chain, Circuit 2, 6 power/6 data openings 9.81” x 11.0” $1332PDE644ARDC2 Ellora Daisy Chain, Circuit 2, 6 power/4 data openings/4 charging USB 9.81” x 11.0” $1597

InfeedsA8BP72 Base Power-In for Hardwire, 72” $161A8BP120 Base Power-In for Hardwire, 120” $203A1BP72 Base Power-In for RA Plug Circuit 1 (only), 72” $235 Tip: Use hardwire infeeds if UL listed (not recognized) is required. Tip: Infeeds have a 20 amp plug end which requires a 20 amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek 30129 15-Amp to 20-Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses.

Flip-n-Go™ Data Options: Cord/Hardwire: 6' or 9' power cord Features: Convenience outlet, flush fit doors with cable Additional Specials: Hardwired power drop space, 15A 125V circuit breaker Material: Painted steel

Flip-n-Go Power/Data Assemblies, 9"x5.5", with additional convenience power outlet on bottomPDNSS Flip-n-Go Grommet, 2 power/1 telecom plate cutout, 6’ power cord, Silver 4.75” x 8.38” $505PDNSR Flip-n-Go Grommet, 2 power/1 telecom plate cutout, 6’ power cord, Black 4.75” x 8.38” $505 PDNS9S Flip-n-Go Grommet, 2 power/1 telecom plate cutout, 9’ power cord, Silver 4.75” x 8.38” $533PDNS9R Flip-n-Go Grommet, 2 power/1 telecom plate cutout, 9’ power cord, Black 4.75” x 8.38” $533


(SIN 711-11)

(SIN 711-2)

(SIN 711-2)

189


Node™ Data Options: (Specials Only) Cord/Hardwire: 6' Power Cord Features: Simple flush mount design, 15 amp, 2 amp Additional Specials: Longer cords, Data openings Material: Painted die-cast Zinc charging USB duplex available

PDF20S Node Power Unit, 2 Outlets, Silver 3” Diameter $256PDF20R Node Power Unit, 2 Outlets, Black 3” Diameter $256PDF20W Node Power Unit, 2 Outlets, Parchment White 3” Diameter $256 PDF12S Node Power Unit, 1 Outlet/2 charging USB, Silver 3” Diameter $367PDF12R Node Power Unit, 1 Outlet/2 charging USB, Black 3” Diameter $367PDF12W Node Power Unit, 1 Outlet/2 charging USB, Parchment White 3” Diameter $367

Oasis™ Power/Data Assemblies, 15 amp power cords Data Options: Cord/Hardwire: 9’cords or Daisy Chaining hardwire Features: Flush with worksurface, Integral lid, Flexibility Material: Painted steel

Oasis Power/Data Assemblies, Plug-InPDOASIS15S Oasis, 6 power/2 telecom plate cutouts, two 108” power cords, 9”x15”, Silver 8.25” x 14.25” $2422PDOASIS15R Oasis, 6 power/2 telecom plate cutouts, two 108” power cords, 9”x15”, Black 8.25” x 14.25” $2422

PDOASIS30S Oasis, 12 power/4 telecom plate cutouts, four 108” power cords, 9”x30”, Silver 8.25” x 29.25” $4167PDOASIS30R Oasis, 12 power/4 telecom plate cutouts, four 108” power cords, 9”x30”, Black 8.25” x 29.25” $4167

Tip: Telecom plates ordered separately.

Oasis Daisy Chain Power/Data Assemblies, hardwire interface, 20 Amp, Circuit 1PDOASIS15D1S Oasis Daisy Chain, Circuit 1, 6 power/2 telecom plate cutouts, 9”x15”, Silver 8.25” x 14.25” $2493PDOASIS15D1R Oasis Daisy Chain, Circuit 1, 6 power/2 telecom plate cutouts, 9”x15”, Black 8.25” x 14.25” $2493 PDOAUU15D1S Oasis Daisy Chain, Circuit 1, 6 power/1 telecom plate cutout/2 charging USB, 9”x15”, Silver 8.25” x 14.25” $2792PDOAUU15D1R Oasis Daisy Chain, Circuit 1, 6 power/1 telecom plate cutout/2 charging USB, 9”x15”, Black 8.25” x 14.25” $2792 PDOASIS30D1S Oasis Daisy Chain, Circuit 1, 12 power/4 telecom plate cutouts, 9”x30”, Silver 8.25” x 29.25” $4288PDOASIS30D1R Oasis Daisy Chain, Circuit 1, 12 power/4 telecom plate cutouts, 9”x30”, Black 8.25” x 29.25” $4288 Oasis Daisy Chain Power/Data Assemblies, hardwire interface, 20 Amp, Circuit 2PDOASIS15D2S Oasis Daisy Chain, Circuit 2, 6 power/2 telecom plate cutouts, 9” x 15”, Silver 8.25” x 14.25” $2493PDOASIS15D2R Oasis Daisy Chain, Circuit 2, 6 power/2 telecom plate cutouts, 9” x 15”, Black 8.25” x 14.25” $2493 PDOAUU15D2S Oasis Daisy Chain, Circuit 2, 6 power/1 telecom plate cutout/2 charging USB, 9”x15”, Silver 8.25” x 14.25” $2792PDOAUU15D2R Oasis Daisy Chain, Circuit 2, 6 power/1 telecom plate cutout/2 charging USB, 9”x15”, Black 8.25” x 14.25” $2792 PDOASIS30D2S Oasis Daisy Chain, Circuit 2, 12 power/4 telecom plate cutouts, 9” x 30”, Silver 8.25” x 29.25” $4288PDOASIS30D2R Oasis Daisy Chain, Circuit 2, 12 power/4 telecom plate cutouts, 9” x 30”, Black 8.25” x 29.25” $4288

Oasis Power-In and Jumpers PDVP72 Hardwire Power-In, 72” $180PDVP144 Hardwire Power-In, 144” $229PDV72AP Base Power-In, 72” (for Plug Circuit 1 only) $279PDJUMPXX Jumper for connecting 2 Oasis Daisy Chain Units, package of two $404

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

(SIN 711-2)

190

Power & DataOrdering Information:> For product features and capability comparison, see page 166-167. > For details and pricing of features listed under the “Additional Specials” section of a product, email [email protected].> Data options for and can be found on page 174-175. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Angled Undermount Satellite Power/Data Units, 2 Power PDPAAPW Angled Power Data Unit w/ 10’ cord, 2 Power, White w/ White $290PDPAAPS Angled Power Data Unit w/ 10’ cord, 2 Power, Silver w/ Grey $290PDPAAPR Angled Power Data Unit w/ 10’ cord, 2 Power, Black w/ Black $290 Angled Undermount Satellite Power/Data Units, 1 Power/2 Stacked USB PDPAAUW Angled Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, White w/ White $435PDPAAUS Angled Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, Silver w/ Grey $435PDPAAUR Angled Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, Black w/ Black $435 Angled Undermount Satellite Power/Data Units, 1 Power/1 Data Opening PDPAADW Angled Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, White w/ White $356PDPAADS Angled Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, Silver w/ Grey $356PDPAADR Angled Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, Black w/ Black $356 Tip: Data knockout adapter tree included. Tip: Will not accommodate VGA connections. Tip: Order a plug strip to consolidate multiple Satellite units under a single top.

Rounded Undermount Satellite Power/Data Units, 2 Power PDP88PW Rounded Power Data Unit w/ 10’ cord, 2 Power, White w/ White $290PDP88PS Rounded Power Data Unit w/ 10’ cord, 2 Power, Silver w/ Grey $290PDP88PR Rounded Power Data Unit w/ 10’ cord, 2 Power, Black w/ Black $290 Rounded Undermount Satellite Power/Data Units, 1 Power/2 Stacked USB PDP88UW Rounded Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, White w/ White $435PDP88US Rounded Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, Silver w/ Grey $435PDP88UR Rounded Power Data Unit w/ 10’ cord, 1 Power/2 Stacked USB, Black w/ Black $435 Rounded Undermount Satellite Power/Data Units, 1 Power/1 Data Opening PDP88DW Rounded Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, White w/ White $356PDP88DS Rounded Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, Silver w/ Grey $356PDP88DR Rounded Power Data Unit w/ 10’ cord, 1 Power/1 Data Opening, Black w/ Black $356 Tip: Data knockout adapter tree included. Tip: Will not accommodate VGA connections. Tip: Order a plug strip to consolidate multiple Satellite units under a single top.

Satellite™ Data Options: Features: Only 1.625”H, mounts under worksurface, Cord/Hardwire: 10’ Power Cord with 15 amp plug 15 amp capability, strain relief on cord Additional Specials: Hardwire Material: Painted steel with matching plastic outlets

(SIN 711-2)

191

(SIN 711-2)


Villa™ Data Options: N/A Cord/Hardwire: 6' or 9' power cord Features: Convenience outlet, Circuit breaker, Additional Specials: Hardwire ([email protected]) Low cost solution Material: Painted steel Villa Power/Data Assemblies, 3.5"x5.5", with additional convenience power outlet on bottomPDVCS Villa, 2 power/2 data openings, 6’ power cord, Silver 3.06” x 5.31” $451PDVCR Villa, 2 power/2 data openings, 6’ power cord, Black 3.06” x 5.31” $451

PDVC9S Villa, 2 power/2 data openings, 9’ power cord, Silver 3.06” x 5.31” $451PDVC9R Villa, 2 power/2 data openings, 9’ power cord, Black 3.06” x 5.31” $451

PDVD2S Villa, 2 power/2 RJ-45 CAT6 jacks, 6’ power cord, Silver 3.06” x 5.31” $633PDVD2R Villa, 2 power/2 RJ-45 CAT6 jacks, 6’ power cord, Black 3.06” x 5.31” $633 PDVD29S Villa, 2 power/2 RJ-45 CAT6 jacks, 9’ power cord, Silver 3.06” x 5.31” $633PDVD29R Villa, 2 power/2 RJ-45 CAT6 jacks, 9’ power cord, Black 3.06” x 5.31” $633

Plug Strip with Surge Protection, Flat Rotating PlugCPPSI 6-outlet plug strip, 10-foot power cord, black $118

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

(SIN 711-2)

(SIN 711-11)

(SIN LISTED BELOW)

192

Ordering Information:> Items on this page work with Power Data units marked with a circle .> See Tables Power and Data section of the Enwork website to see detailed pictures of standard Telecom plates. > Other combinations available, contact [email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Part Number List Price (US$)

Telecom Plates (for Flip-N-Go, Oasis and Foundation Trough Kits)

A-BL Blank cover to fill Hole in Power/Data unit $19

A-BL-73-73 RJ45 category 5 Data Inline (Qty. 2) $199

A-BL-B RJ45 category 6 Data (Qty. 1) $103

A-BL-B-B RJ45 category 6 Data (Qty. 2) $199

A-BL-A-B-B RJ11 category 3 Phone (Qty. 1) and RJ45 category 6 Data (Qty. 2) $245

A-BL-B-B-B-B RJ45 category 6 Data (Qty. 4) $376

A-BL-B-B-C51 RJ45 category 6 Data (Qty. 2) and 15 pin HDVGA (Qty. 1) $382

A-BL-L-C51 Mini-stereo (Qty. 1) and 15 pin HDVGA (Qty 1) $228

A-BL-B-B-L-C51 RJ45 category 6 Data (Qty. 2), Mini-stereo (Qty. 1) and 15 pin HDVGA $415

A-BL-13-13 3 pin XLR Female (Qty. 2) $383

A-BL-CRDMINDER Cordminder Plate (Qty. 1) $64

A-BL-102-C51 15 pin HDVGA (Qty. 1) and USB (Qty. 1) $257

A-BL-A-102-C51 RJ11 category 3 Phone (Qty. 1), 15 pin HDVGA (Qty. 1) and USB (Qty. 1) $308

A-BL-C51-77-78-79 15 pin HDVGA (Qty. 1), and RCA Red, White and Yellow (Qty. 1) $286

A-BL-Z DVI (Qty. 1) $312

A-BL-C45-L-C51 HDMI (Qty. 1), Mini-stereo (Qty. 1), and 15 pin HDVGA $458

A-BL-C45-B-B HDMI (Qty. 1) and RJ45 category 6 Data (Qty. 2) $374

A-BL-C45 HDMI (Qty. 1) $205

A-BL-C45-C51 HDMI (Qty. 1) and 15 pin HDVGA $350

A-BL-C45-C51-B-B HDMI (Qty. 1), 15 pin HDVGA (Qty. 1), and RJ45 category 6 Data (Qty. 2) $518

A-BL-C45-A-A HDMI (Qty. 1) and RJ11 category 3 Phone (Qty. 2) $417

A-BL-L-C51-Z Mini-stereo (Qty. 1), 15 pin HDVGA (Qty. 1), and DVI (Qty.1) $485

A-BL-102-102 USB (Qty. 2) $169

A-BL-102-C45 HDMI (Qty. 1) and USB (Qty. 1) $286

Power & Data

DATACOM KEY

73 Cat 5E Data Inline13 XLR Female102 USB, Type A/A with 72” patch cord77/78/79 RCA InlineA (suffix) Cat 3 Phone (punch down) B Cat 6 Data (punch down)C45 HDMI with 36” patch cordC51 15 pin HDVGA with 72” patch cord L Mini-stereo InlineZ DV1 Inline

Tip:> Phone/Data jacks are punch-down unless otherwise indicated (e.g. “Inline”)> Video RCA, mini-stereo, and DVI are Inline (Inline allows connection to the back of the connector without any wiring)> XLR connector is solder> VGA includes 72” ultra thin patch cord> HDMI includes 36” ultra thin patch cord> USB is type A/A, 72” patch cord

(SIN 711-11)

193


PDBHDR HDMI Corded Coupler, 18" Length, Black $109PDBHDW HDMI Corded Coupler, 18" Length, White $109

PDBVGA VGA 15-pin Cord, M/F, 10' Length $137

PDBCAT6 RJ45 CAT 6 Data Cord, Siemen, M/F, 10' Length $117

PDBCAT5EA RJ45 Cat 5E Data Cord, Amp, M/F, 9' Length $71PDBCAT5EB RJ45 Cat 5E Data Cord, Panduit, M/F, 9' Length $97

PDBCAT5EC RJ45 Cat 5E/6 Data Jack, Punch Down $34

PDBMINIR Mini-Stereo, M/F, 10' length, Black $28PDBMINIW Mini-Stereo, M/F, 10' length, White $28

PDUSBAR USB-A Data Transfer (not charging), 6' length, Black $68PDUSBAW USB-A Data Transfer (not charging), 6' length, White $68

URDATA Data Adapter Tree, Grey $20PDDTR Data Adapter Tree, Black $20PDDTW Data Adapter Tree, White $20

Tip: Service part. Comes standard with power data units. Order for reconfiguration.

Ordering Information:> Items on this page work with Power Data units marked with a triangle . > These Power Data units come with an Adapter Kit that allows the solutions below

to be snapped into the unit's data openings.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

(SIN 711-1)

(SIN 711-11)

(SIN 711-2)

(SIN 711-11)

(SIN LISTED BELOW)

194

Power & Data - Cable Management



STEP 1 - Monitor Risers Only



Monitor Riser, Steel, 11”D URISER28^ Monitor Riser for Single Monitor, 28”W $339URISER39^ Monitor Riser for Double Monitors, 39”W $427

Vertical Cable Managers with weighted basePDVCMR Vertical Cable Manager, flexible spine, 30”, worksurface attached, Black $198PDVCMS Vertical Cable Manager, flexible spine, 30”, worksurface attached, Silver $198 ULCM Vertical Cable Manager, flexible spine, 1.5” diameter, Black $163

Cable Managers and Grippers PDGR Universal Cable Gripper, 5 openings, Black $23

PDUCMR Universal Cable Manager, extruded plastic, double-sided tape, 22”, Black $58PDUCMS Universal Cable Manager, extruded plastic, double-sided tape, 22”, Silver $58 Tip: Can be mounted vertically to legs or horizontally under a worksurface PDJTR24 Universal Cable Manager extruded black plastic J-channel, 24” (22” actual) $40PDJTR30 Universal Cable Manager extruded black plastic J-channel, 30” (28” actual) $43PDJTR36 Universal Cable Manager extruded black plastic J-channel, 36” (34” actual) $43PDJTR42 Universal Cable Manager extruded black plastic J-channel, 42” (40” actual) $51PDJTR48 Universal Cable Manager extruded black plastic J-channel, 48” (46” actual) $51PDJTR54 Universal Cable Manager extruded black plastic J-channel, 54” (52” actual) $60PDJTR60 Universal Cable Manager extruded black plastic J-channel, 60” (58” actual) $60PDJTR66 Universal Cable Manager extruded black plastic J-channel, 66” (64” actual) $60PDJTR72 Universal Cable Manager extruded black plastic J-channel, 72” (70” actual) $60

Tip: If installing between legs, order next smallest size. Tip: Channel is 1”H x 1.5”W

Steel Cable TroughsPDK48 Steel Cable Trough for Tables, Black 48’’W $121

(SIN 711-1)

(SIN 711-2)

(SIN 711-1)

(SIN 711-2)

195

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

3 -

POW

ER /

DATA

196

(*) Credenza Top Suffix ListA Standard Credenza topB Specialty Top, ordered separately (includes quartz, ply,

solid surface or KyrstalCast®) on pages 70-71.

Tip: Top options not available on credenzas w/ aluminum trim.

Tip: For back-painted glass top, choose suffix A.

(&) Credenza Case Options Suffix ListA Standard no chargeB Includes 4 Vents (rear) +$370C Includes oversized opening (far right) with +$637

Rear Access Door (includes 2 vents and brush strip for cable management). Oversized opening can be used for AV Rack or Refrigerator (ordered separately).

Remaining doors have adustable shelf behind them. This option available on 24" deep only credenzas. Height changes to 39" on buffet credenza, 4-door is unchanged.

D Includes pull-out Waste Receptacle +$1111 (far left door). Remaining doors have an adjustable

shelf behind them. E Includes pull-out Waste Receptacle +$1740

(far left door) and oversized opening (far right) with Rear Access Door (includes 2 vents and brush strip for

cable management). Oversized opening can be used for AV Rack or Refrigerator (ordered separately). Remaining doors have an adjustable shelf behind them. This option available on 24" deep only credenzas. Height changes

to 39" on buffet credenza, 4-door is unchanged.

Tip: Case options not available on credenzas w/ aluminum trim.

Tip: When Waste Receptacle is ordered, door handle will be mounted horizontally in center of door.

Tip: Oversized opening for refrigerator and AV Rack is 20"W x 29"H (Buffet Credenzas) and 20”W x 26.6”H (Credenzas).

STEP 1

STEP 4(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium Laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar

Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.


** See product specifications at top of page.



Stain Match fee)

STEP 2

STEP 3(@) Pull Suffix List:

(B) Bar (A) Arc (S) Sleek

Product Specifications:> 110-degree hinges> 20”D credenzas have an interior depth of 18.25”D.

24”D credenzas have an interior depth of 22.5”D. > Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.

Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

Ordering Information:> Includes locks and levelers> Ships assembled> Includes adjustable shelf> To add a back-painted glass top, choose suffix A in Step 2. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1 W1 H1 Part Number Description List Price (US$)

Laminate Foundation Credenzas, 31"H20 36 31 TDL2036&*@# Laminate Credenza, 2 doors, 20 x 36 $230720 48 31 TDL2048&*@# Laminate Credenza, 4 doors, 20 x 48 $278920 60 31 TDL2060&*@# Laminate Credenza, 4 doors, 20 x 60 $330520 72 31 TDL2072&*@# Laminate Credenza, 4 doors, 20 x 72 $3821 24 60 31 TDL2460&*@# Laminate Credenza, 4 doors, 24 x 60 $373924 72 31 TDL2472&*@# Laminate Credenza, 4 doors, 24 x 72 $428024 84 31 TDL2484&*@# Laminate Credenza, 4 doors, 24 x 84 $568024 96 31 TDL2496&*@# Laminate Credenza, 6 doors, 24 x 96 $5680 Laminate Foundation Buffet Credenzas, 36"H24 60 36 TDLB2460&*@# Laminate Buffet Credenza, 4 doors/4 drawers, 24 x 60 $425524 72 36 TDLB2472&*@# Laminate Buffet Credenza, 4 doors/4 drawers, 24 x 72 $497324 84 36 TDLB2484&*@# Laminate Buffet Credenza, 4 doors/4 drawers, 24 x 84 $653424 96 36 TDLB2496&*@# Laminate Buffet Credenza, 6 doors/6 drawers, 24 x 96 $6534 Veneer Foundation Credenzas, 31"H 20 36 31 TDV2036&*@# Veneer Credenza, 2 doors, 20 x 36 $535420 48 31 TDV2048&*@# Veneer Credenza, 4 doors, 20 x 48 $733720 60 31 TDV2060&*@# Veneer Credenza, 4 doors, 20 x 60 $828020 72 31 TDV2072&*@# Veneer Credenza, 4 doors, 20 x 72 $9182 24 60 31 TDV2460&*@# Veneer Credenza, 4 doors, 24 x 60 $892424 72 31 TDV2472&*@# Veneer Credenza, 4 doors, 24 x 72 $9971 Veneer Foundation Buffet Credenzas, 36"H 24 60 36 TDVB2460&*@# Veneer Buffet Credenza, 4 doors/4 drawers, 24 x 60 $12,43424 72 36 TDVB2472&*@# Veneer Buffet Credenza, 4 doors/4 drawers, 24 x 72 $13,835

AV Rack

CPAVR1624 Freestanding AV Rack (18”D x 19.25”W x 25.5”H), $1239 Middle Atlantic CFR-14-18

W1

Credenza

H1

D1Buffet

Credenza

W1

H1

D1

Foundation Credenzas

(SIN 711-3)

(SIN 711-11)

197

COORDINATING FURNITURESee pages 86-103 for

Foundation Conference Tables.

W1

Credenza

H1

D1Buffet

Credenza

W1

H1

D1


Laminate Foundation Credenzas with Aluminum Trim, 31"H20 36 31 TEL2036@# Laminate Credenza, 2 doors, Aluminum Trim, 20 x 36 $241920 48 31 TEL2048@# Laminate Credenza, 4 doors, Aluminum Trim, 20 x 48 $297520 60 31 TEL2060@# Laminate Credenza, 4 doors, Aluminum Trim, 20 x 60 $349220 72 31 TEL2072@# Laminate Credenza, 4 doors, Aluminum Trim, 20 x 72 $4008 24 60 31 TEL2460@# Laminate Credenza, 4 doors, Aluminum Trim, 24 x 60 $392624 72 31 TEL2472@# Laminate Credenza, 4 doors, Aluminum Trim, 24 x 72 $4466

Laminate Buffet Foundation Credenzas with Aluminum Trim, 36"H24 60 36 TELB2460@# Laminate Buffet Credenza, 4 doors/4 drawers, Aluminum Trim, 24 x 60 $444124 72 36 TELB2472@# Laminate Buffet Credenza, 4 doors/4 drawers, Aluminum Trim, 24 x 72 $5160 Veneer Foundation Credenzas with Aluminum Trim, 31"H20 36 31 TEV2036@# Veneer Credenza, 2 doors, Aluminum Trim, 20 x 36 $557320 48 31 TEV2048@# Veneer Credenza, 4 doors, Aluminum Trim, 20 x 48 $762420 60 31 TEV2060@# Veneer Credenza, 4 doors, Aluminum Trim, 20 x 60 $850520 72 31 TEV2072@# Veneer Credenza, 4 doors, Aluminum Trim, 20 x 72 $9565 24 60 31 TEV2460@# Veneer Credenza, 4 doors, Aluminum Trim, 24 x 60 $915524 72 31 TEV2472@# Veneer Credenza, 4 doors, Aluminum Trim, 24 x 72 $10,300

Veneer Buffet Foundation Credenzas with Aluminum Trim, 36"H24 60 36 TEVB2460@# Veneer Buffet Credenza, 4 doors/4 drawers, Aluminum Trim, 24 x 60 $12,94824 72 36 TEVB2472@# Veneer Buffet Credenza, 4 doors/4 drawers, Aluminum Trim, 24 x 72 $14,392

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN 711-3)

198

STEP 2(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90

Brite White whiteboard laminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].




Stain Match fee)


(B) Bar (A) Arc (S) Sleek

Product Specifications:> 110-degree hinges> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey

Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops

and melamine cases.

Ordering Information:> Ships assembled> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1 W1 H1 Part Number Description List Price (US$) Laminate Foundation Lecterns with 2 door, Non-Locking Cabinet24 27 49 LPWLECTA@# Laminate Lectern, levelers $246524 27 49 LPWLECTAC@# Laminate Lectern, casters $2485 Veneer Foundation Lecterns with 2 door, Non-Locking Cabinet 24 27 49 LPWLECTV@# Veneer Lectern, levelers $667524 27 49 LPWLECTVC@# Veneer Lectern, casters $6675

COORDINATING FURNITURESee pages 86-103 for

Foundation Conference Tables.

Foundation Lecterns (SIN 711-9)

199

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

200

STEP 2

STEP 1 - Rectangle Credenzas Only(@) Pull Suffix List:

(B) Bar (A) Arc

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90



Rectangle Credenzas Only(#) Veneer Suffix List:D Maple (stained similar to Kensington


Stain Match fee)

(S) Sleek

STEP 1 - Tapered Credenza Only(%) Locking Suffix List:N No locks no chargeL Locking +$100

Product Specifications:> Includes locks> 4” Impression Foot> 110-degree hinges> Includes adjustable shelf> Two standard laminates (Wilsonart Field Elm 7999K-12 and

Grey Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

Ordering Information:> Ships assembled (except for feet)> A freight fee of $100 net is assessed on orders less

than $1000 net. See page 13.


Laminate Impression Credenzas, 31"H20 36 31 TCL2036@# Laminate Impression Credenza, 2 doors, 20 x 36 $189220 48 31 TCL2048@# Laminate Impression Credenza, 4 doors, 20 x 48 $253520 60 31 TCL2060@# Laminate Impression Credenza, 4 doors, 20 x 60 $300720 72 31 TCL2072@# Laminate Impression Credenza, 4 doors, 20 x 72 $3478 24 60 31 TCL2460@# Laminate Impression Credenza, 4 doors, 24 x 60 $340024 72 31 TCL2472@# Laminate Impression Credenza, 4 doors, 24 x 72 $3935 Laminate Impression Buffet Credenzas, 36"H24 60 36 TCLB2460@# Laminate Impression Buffet Credenza, 4 doors/4 drawers, 24 x 60 $411224 72 36 TCLB2472@# Laminate Impression Buffet Credenza, 4 doors/4 drawers, 24 x 72 $4811

Veneer Impression Credenzas, 31"H20 36 31 TCV2036@# Veneer Impression Credenza, 2 doors, 20 x 36 $566220 48 31 TCV2048@# Veneer Impression Credenza, 4 doors, 20 x 48 $782020 60 31 TCV2060@# Veneer Impression Credenza, 4 doors, 20 x 60 $872820 72 31 TCV2072@# Veneer Impression Credenza, 4 doors, 20 x 72 $9724 24 60 31 TCV2460@# Veneer Impression Credenza, 4 doors, 24 x 60 $948024 72 31 TCV2472@# Veneer Impression Credenza, 4 doors, 24 x 72 $10,578 Veneer Impression Buffet Credenzas, 36"H24 60 36 TCVB2460@# Veneer Impression Buffet Credenza, 4 doors/4 drawers, 24 x 60 $12,15624 72 36 TCVB2472@# Veneer Impression Buffet Credenza, 4 doors/4 drawers, 24 x 72 $13,486

W1

Credenza

H1

D1

BuffetCredenza

W1

H1

D1

COORDINATING FURNITURESee page 108 for Impression

Conference Tables.

Impression Credenzas (SIN 711-9)

201

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

202

Product Specifications:> Fixed units are 42”H. > Cabinet on fixed height unit is 20”W x 36”H x 20”D. Includes one non-locking door and one drawer.> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.


Ordering Information:> Ships assembled.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STEP 2(^) Paint Suffix ListG Storm with black castersR Black with black castersS Silver with white castersT Medium Tone with black castersW Arctic White with white castersZ Other



Traditional Impression Lectern, 49"HLMLECTB@# Lectern, double doors, 4”H Anodized Aluminum feet, 24”D x 27”W $2528

Tip: Fixed Top.

STEP 3 - if applicable(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90



Rectangle Credenzas Only(#) Veneer Suffix List:D Maple (stained similar to Kensington


Stain Match fee)

STEP 1 - if Applicable(@) Pull Suffix List:

(B) Bar (A) Arc

Impression Lecterns (SIN 711-9)

203


Traditional Impression Lectern, 49"HLMLECTB@# Lectern, double doors, 4”H Anodized Aluminum feet, 24”D x 27”W $2528

Tip: Fixed Top.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

Notes

204

Notes

205

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

Notes

206

STEP 2(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium






Stain Match fee)


Tip: Polished aluminum feet are available at no charge. Free form “Polished Feet” on your order and put a “Z” in front of the part number.


STEP 3 - Credenza w/ Base Only


(B) Bar (A) Arc

Product Specifications:> Includes locks> Base Credenzas include Sensation aluminum die-cast feet.> 110-degree hinges> Includes adjustable shelf> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.


Ordering Information:> Ships assembled (except for feet/base)> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Sensation Credenzas

Notes

207


Laminate Sensation Credenzas with Base, 31"H20 36 31 TGL2036@#^ Laminate Sensation Base Credenza, 2 doors, 20 x 36 $334820 48 31 TGL2048@#^ Laminate Sensation Base Credenza, 4 doors, 20 x 48 $366520 60 31 TGL2060@#^ Laminate Sensation Base Credenza, 4 doors, 20 x 60 $417120 72 31 TGL2072@#^ Laminate Sensation Base Credenza, 4 doors, 20 x 72 $4675 24 60 31 TGL2460@#^ Laminate Sensation Base Credenza, 4 doors, 24 x 60 $433424 72 31 TGL2472@#^ Laminate Sensation Base Credenza, 4 doors, 24 x 72 $4853

Laminate Sensation Buffet Credenzas with Base, 36"H24 60 36 TGLB2460@#^ Laminate Sensation Base Buffet Credenza, $4957 4 doors/4 drawers, 24 x 60 24 72 36 TGLB2472@#^ Laminate Sensation Base Buffet Credenza, $5478 4 doors/4 drawers, 24 x 72

Veneer Sensation Credenzas with Base, 31"H20 36 31 TGV2036@#^ Veneer Sensation Base Credenza, 2 doors, 20 x 36 $688520 48 31 TGV2048@#^ Veneer Sensation Base Credenza, 4 doors, 20 x 48 $843620 60 31 TGV2060@#^ Veneer Sensation Base Credenza, 4 doors, 20 x 60 $948020 72 31 TGV2072@#^ Veneer Sensation Base Credenza, 4 doors, 20 x 72 $10,526 24 60 31 TGV2460@#^ Veneer Sensation Base Credenza, 4 doors, 24 x 60 $10,24324 72 31 TGV2472@#^ Veneer Sensation Base Credenza, 4 doors, 24 x 72 $11,397

Veneer Sensation Buffet Credenzas with Base, 36"H24 60 36 TGVB2460@#^ Veneer Sensation Base Buffet Credenza, $12,666 4 doors/4 drawers, 24 x 60 24 72 36 TGVB2472@#^ Veneer Sensation Base Buffet Credenza, $12,930 4 doors/4 drawers, 24 x 72

Laminate Sensation Base Lectern with Levelers, 49"H24 27 49 LMLECTA@#^ Sensation Lectern, 24D x 27W, Laminate $2869 Tip: Includes adjustable shelf.

W1

Credenza

H1

D1Buffet

Credenza

W1

H1

D1

COORDINATING FURNITURESee pages 130 & 136 for

coordinating Sensation Tables.

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN 711-3)

(SIN 711-11)

(SIN LISTED BELOW)

208

STEP 2(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium






Stain Match fee)


(B) Bar (A) Arc


Laminate Stealth Credenzas, 4 doors, 29"HLYCL2460@# Laminate Stealth Credenza, 24”D x 60”W $5700LYCL2472@# Laminate Stealth Credenza, 24”D x 72”W $6221 Laminate Stealth Buffet Credenzas, 4 doors/4 drawers, 36"HLYCLB2460@# Laminate Stealth Buffet Credenza, 24”D x 60”W $6708LYCLB2472@# Laminate Stealth Buffet Credenza, 24”D x 72”W $7428

Veneer Stealth Credenzas, 4 doors, 29"HLYCV2460@# Veneer Stealth Credenza, 24”D x 60”W $11,030LYCV2472@# Veneer Stealth Credenza, 24”D x 72”W $11,936

Veneer Stealth Buffet Credenzas, 4 doors/4 drawers, 36"HLYCVB2460@# Veneer Stealth Buffet Credenza, 24”D x 60”W $15,212LYCVB2472@# Veneer Stealth Buffet Credenza, 24”D x 72”W $16,642

Product Specifications:> Actual case is 22.9”D 27.9"H x 56.9/68.9"W.> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.


Ordering Information:> Credenzas are designed to have back against a wall. Case depth must

be altered if used in middle of a space. Email [email protected].> Aluminum Trim compliments Stealth Conference Bases> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Stealth Credenzas (SIN 711-11)

209

Notes

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

210

Notes

211

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium






Stain Match fee)



STEP 3

STEP 2

STEP 1(&) Accent Foot Trim Suffix List:N Standard Foot no chargeY Polished Aluminum +$**

Accent Trim

Tip: Accent trim can be painted. Contact [email protected] for a quote.** Pricing not available at time of printing. Please consult latest electronic version on www.enwork.com or consult your CAP electronic catalog.


Laminate Zori Credenzas with Base, 31"H20 48 31 CYZL2048&#^ Laminate Zori Base Credenza, 4 Doors, 20”D x 48”W $376520 60 31 CYZL2060&#^ Laminate Zori Base Credenza, 4 Doors, 20”D x 60”W $427120 72 31 CYZL2072&#^ Laminate Zori Base Credenza, 4 Doors, 20”D x 72”W $4775

Laminate Zori Buffet Credenzas with Base, 36"H24 60 36 CYZLB2460&#^ Laminate Zori Base Buffet Credenza, $5057 4 Doors/4 Drawers, 24”D x 60”W 24 72 36 CYZLB2472&#^ Laminate Zori Base Buffet Credenza, $5578 4 Doors/4 Drawers, 24”D x 72”W

Veneer Zori Credenzas with Base, 31"H20 48 31 CYZV2048&#^ Veneer Zori Base Credenza, 4 doors, 20 x 48 $853620 60 31 CYZV2060&#^ Veneer Zori Base Credenza, 4 doors, 20 x 60 $958020 72 31 CYZV2072&#^ Veneer Zori Base Credenza, 4 doors, 20 x 72 $10,626

Veneer Zori Buffet Credenzas with Base, 36"H24 60 36 CYZVB2460&#^ Veneer Zori Base Buffet Credenza, $12,777 4 doors/4 drawers, 24 x 60 24 72 36 CYZVB2472&#^ Veneer Zori Base Buffet Credenza, $13,030 4 doors/4 drawers, 24 x 72

ACCESSORIES

TOPS

BASES

POWER DATA

SUPPORT FURNITURE

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

COORDINATING FURNITURESee pages 176 & 184-185 for

coordinating Zori Tables.

Zori Credenzas

W1

Credenza

H1

D1Buffet

Credenza

W1

H1

D1

(SIN 711-2)

Product Specifications:> Includes locks> Credenzas include Zori aluminum die-cast feet.> 110-degree hinges> Includes adjustable shelf> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm

8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

Ordering Information:> Ships assembled (except for feet/base)> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

212

STEP 1(^) Paint Suffix ListG Storm (not available on pneumatics)R BlackS SilverT Medium Tone (not available on pneumatics)W Arctic White (not available on pneumatics)Z Other


STEP 4(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, +$264 -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +$308 MC, SP and NT finishes) and Wilsonart

Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +$332

Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite

White whiteboard laminate.




STEP 2 - Traditional and Non-Cabinet Lecterns Only


STEP 3

Zori Lecterns Patent Pending (SIN 711-2)

Product Specifications:> Fixed units are 42”H to the front edge of top. CYL1PC adjustable unit is 30.5”- 48.5”H.

CYL3PC adjustable unit is 37”- 55”H.> Basic cabinet is 24”D x 20”W and includes adjustable shelf and locking front door.> Cabinets contain sleek pulls (only). > Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.




Lecterns with Basic Cabinet, with CastersCYL1FC^&# Lectern, Basic Cabinet, 26”D x 28”W, Fixed Height $2980

Tip: Cabinet is 30”H.

CYL1PC^&# Lectern, Basic Cabinet, 26”D x 28”W, Pneumatic Adjustable $3935

Tip: Cabinet is 24”H.

Lectern with Back Panel (no cabinet), with CastersCYL3FC^@&# Lectern, 26”D x 28”W, fixed height $2219

CYL3PC^@&# Lectern, 26”D x 28”W, Pneumatic Adjustable $3164

CYL3MOD^ Modesty for CYL3PC $696

Tip: Modesty is powder coated steel.

Traditional Zori Fixed Height Lectern, 49"HCYLECTA^@# Lectern, non-locking double doors, Zori Aluminum feet, $3050 24”D x 27”W

213

Zori 34"W Command Centers Patent Pending

ACCESSORIES

TOPS

BASES

POWER DATA

SUPPORT FURNITURE

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN 711-2) (SIN 711-2)

Product Specifications:> Fixed units are 42”H. Adjustable units are 31.5”- 48.5”H.> Cabinet on fixed height unit is 26”W x 29”H x 24”D. > Cabinet on adjustable height unit is 26”W x 24”H x 24”D. > Top is flat. > Includes powder coated steel modesty panel.> Basic cabinet includes adjustable shelf.> Tech cabinet includes rack rails (12 RU on adjustable, 14 RU on fixed), rear locking access door, and extra vent holes.> Cabinets contain sleek pulls (only). > Front door is locking. Back door on tech cabinet is locking with common cores for all tech cabinets on order.> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains.




34” Command Center with Basic Cabinet, with CastersCYL4FC^&# Command Center with Basic Cabinet, 28”D x 34”W, Fixed Height $3549 CYL4PC^&# Command Center with Basic Cabinet, 28”D x 34”W, Pneumatic Adjustable $4392 Tip: Pneumatic adjustable first ship Spring 2019.

34” Command Center with Tech Cabinet, with CastersCYL5FC^&# Command Center with Tech Cabinet, 28”D x 34”W, Fixed Height $3699

CYL5PC^&# Command Center with Tech Cabinet, 28”D x 34”W, Pneumatic Adjustable $4542

Tip: Pneumatic adjustable first ship Spring 2019.

Fan for Tech Cabinets in Zori Command Centers and Teacher DeskCYFAN Fan for Zori Command Centers and Teacher Desk Tech Cabinets $851

214

Zori 66"W Command Centers Patent Pending (SIN 711-2)

Product Specifications:> Fixed units are 42”H. Adjustable units with casters are 32”- 50”H. Adjustable units with levelers are 30” - 48”H.> Cabinet on fixed height unit is 30”H x 28”D. > Cabinet on adjustable height unit is 24”H x 28”D. > Top is flat. Includes grommet over cabinet. > Includes powder coated steel modesty panel.> Basic cabinet includes adjustable shelf.> Tech cabinet includes rack rails (12 RU on adjustable, 18 RU on fixed), rear locking access door, and extra vent holes.> Cabinets contain sleek pulls (only). > Front door is locking. Back door on tech cabinet is locking with common cores for all tech cabinets on order.> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

Ordering Information:> Ships assembled.> Fan for tech cabinet and battery pack for electric height-adjustable units are available. See page 217. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

STEP 1(^) Paint Suffix ListG Storm (not available on pneumatic and electric)R BlackS SilverT Medium Tone (not available on pneumatic and electric)W Arctic White (not available on pneumatic and electric)Z OtherTip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

STEP 3(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +$500Y Formica Non-Premium (includes 58, 43, +$650 MC, SP, and NT finishes), Formica Premium

(WR, 42, 77, 46, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart

Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].** See product specifications at top of page.


STEP 2


66” Command Center with One 20”W Basic Cabinet (LH) and One 10”W (RH) Storage Cabinet, w/ CastersCYL6FC^&# 30”D x 66”W, Fixed Height $5182 CYL6PC^&# 30”D x 66”W, Pneumatic Adjustable $7363 CYL6EC^&# 30”D x 66”W, Electric Adjustable $6992

66” Command Center with One 20”W Tech Cabinet (LH) and One 10”W Storage Cabinet (RH), w/ CastersCYL8FC^&# 30”D x 66”W, Fixed Height $5282 CYL8PC^&# 30”D x 66”W, Pneumatic Adjustable $7463 CYL8EC^&# 30”D x 66”W, Electric Adjustable $7092

215

ACCESSORIES

TOPS

BASES

POWER DATA

SUPPORT FURNITURE

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN 711-2) (SIN 711-2)


66” Command Center with One 20”W Basic Cabinet (LH) and One 10”W (RH) Storage Cabinet, w/ LevelersCYLAAFC^# 30”D x 66”W, Fixed Height $5082 CYLAAPC^# 30”D x 66”W, Pneumatic Adjustable $7263 CYLAAEC^&# 30”D x 66”W, Electric Adjustable $6892

66” Command Center with One 20”W Tech Cabinet (LH) and One 10”W Storage Cabinet (RH), w/ LevelersCYLCCFC^# 30”D x 66”W, Fixed Height $5182 CYLCCPC^# 30”D x 66”W, Pneumatic Adjustable $7363 CYLCCEC^&# 30”D x 66”W, Electric Adjustable $6992

AccessoriesCYFAN Fan for Zori Command Centers and Teacher Desk Tech Cabinets $851CYBATT Battery Pack for Electric Command Centers $515

216

Zori Teacher Desks Patent Pending (SIN 711-2)

(?) Caster Color Suffix List:B Black no chargeW White with Grey Trim no charge

STEP 4


STEP 3

Product Specifications:> Desks are laminate case, with laminate worksurface and three-quarter height steel back panels.> Lock cores are LL Series. > Height is 29"> Box/File peds and Bi-Level basic cabinets are 16”W, Bi-Level tech cabinets are 20.75”W> Desks have sleek pulls > Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.

Ordering Information:> Ships unassembled.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(&) Cable Management Suffix ListN No cable management no chargeL Grommet (over pedestal) +$19M Power/Data Cutout (over pedestal) +$37Tip: Product includes wire chase in back of pedestal. Grommet and cutouts are not recommended in the center of the desk due to inset modesty panel.

STEP 1

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$264 (-38, -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard +$308 (58, 43, MC, SP and NT finishes) and

Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates.


42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].

STEP 5


STEP 2


Zori Teacher Desk with RH Box/File PedCYTDRH54&^@# Teacher Desk with RH Box/File Ped, 24” x 54”W on levelers $2640CYTDRH60&^@# Teacher Desk with RH Box/File Ped, 24” x 60”W on levelers $2740CYTDRH72&^@# Teacher Desk with RH Box/File Ped, 24” x 72”W on levelers $2840 CYTDRH54C&^@?# Teacher Desk with RH Box/File Ped, 24” x 54”W on casters $2783CYTDRH60C&^@?# Teacher Desk with RH Box/File Ped, 24” x 60”W on casters $2883CYTDRH72C&^@?# Teacher Desk with RH Box/File Ped, 24” x 72”W on casters $2983

Zori Teacher Desk with LH Box/File PedCYTDLL54&^@# Teacher Desk with LH Box/File Ped, 24” x 54”W on levelers $2640CYTDLL60&^@# Teacher Desk with LH Box/File Ped, 24” x 60”W on levelers $2740CYTDLL72&^@# Teacher Desk with LH Box/File Ped, 24” x 72”W on levelers $2840

CYTDLL54C&^@?# Teacher Desk with LH Box/File Ped, 24” x 54”W on casters $2783CYTDLL60C&^@?# Teacher Desk with LH Box/File Ped, 24” x 60”W on casters $2883CYTDLL72C&^@?# Teacher Desk with LH Box/File Ped, 24” x 72”W on casters $2983

217

ACCESSORIES

TOPS

BASES

POWER DATA

SUPPORT FURNITURE

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN 711-2) (SIN 711-2)


Zori Bi-Level Teacher Desk with Basic Cabinet - RH CY2BRR54&^@# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 60”W, on levelers $2670CY2BRR60&^@# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 66”W, on levelers $2770CY2BRR72&^@# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 78”W, on levelers $2870

CY2BRR54C&^@?# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 60”W, on casters $2813CY2BRR60C&^@?# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 66”W, on casters $2913CY2BRR72C&^@?# Bi-Level Teacher Desk with RH Basic Cabinet, 24” x 78”W, on casters $3013

Tip: Overall width includes a 6-1/8” overhang of the cabinet top.

Zori Bi-Level Teacher Desk with Basic Cabinet - LH CY2BLL54&^@# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 60”W, on levelers $2670CY2BLL60&^@# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 66”W, on levelers $2770CY2BLL72&^@# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 78”W, on levelers $2870

CY2BLL54C&^@?# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 60”W, on casters $2813CY2BLL60C&^@?# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 66”W, on casters $2913CY2BLL72C&^@?# Bi-Level Teacher Desk with LH Basic Cabinet, 24” x 78”W, on casters $3013

Tip: Overall width includes a 6-1/8” overhang of the cabinet top.

Zori Bi-Level Teacher Desk with Tech Cabinet - RH CY2TRR54&^@# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 62”W, on levelers $2781CY2TRR60&^@# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 68”W, on levelers $2881CY2TRR72&^@# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 80”W, on levelers $2981

CY2TRR54C&^@?# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 62”W, on casters $2923CY2TRR60C&^@?# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 68”W, on casters $3023CY2TRR72C&^@?# Bi-Level Teacher Desk with RH Tech Cabinet, 24” x 80”W, on casters $3123

Tip: Tech cabinets include A/V rack rails (10 positions) and locking access door on front of desk for acess to back of A/V rack. Tip: Overall width includes a 3-5/8” overhang of the cabinet top.

Zori Bi-Level Teacher Desk with Tech Cabinet - LH CY2TLL54&^@# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 62”W, on levelers $2781CY2TLL60&^@# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 68”W, on levelers $2881CY2TLL72&^@# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 80”W, on levelers $2981

CY2TLL54C&^@?# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 62”W, on casters $2923CY2TLL60C&^@?# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 68”W, on casters $3023CY2TLL72C&^@?# Bi-Level Teacher Desk with LH Tech Cabinet, 24” x 80”W, on casters $3123

Tip: Tech cabinets include A/V rack rails (10 positions) and locking access door on front of desk for acess to back of A/V rack. Tip: Overall width includes a 3-5/8” overhang of the cabinet top.

218

(^) Base Finishes List:A Clear Anodized Alum. (Impression only)G StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other

Tip: Some alternative paint finishes are available. A $350 list set-up fee is charged on orders less than 20 units.

STEP 1

STEP 2(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, -60). +$40 Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +$55 MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +$79





Stain Match fee)


STEP 2 - Zori Tables Only

Ordering Information:> Occasional Tables include base, top and hardware. Assembled in field.> Table edges are 3mm. Additional edge choices available by contacting [email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Laminate Impression TablesLPLSC36^# Impression Lam Square Coffee Table, 36’’D x 36’’W x 16’’H $1148LPLRC2460^# Impression Laminate Rectangle Coffee Table, 24’’D x 60’’W x 16’’H $1148LPLRC3060^# Impression Laminate Rectangle Coffee Table, 30’’D x 60’’W x 16’’H $1215LPLDE2424^# Impression Laminate Square End Table, 24’’D x 24’’W x 20’’H $1015 Tip: Tables include Impression straight legs. Veneer Impression Tables LPVSC36^# Impression Veneer Square Coffee Table, 36’’D x 36’’W x 16’’H $1787LPVRC2460^# Impression Veneer Rectangle Coffee Table, 24’’D x 60’’W x 16’’H $2114LPVRC3060^# Impression Veneer Rectangle Coffee Table, 30’’D x 60’’W x 16’’H $2150LPVDE2424^# Impression Veneer Square End Table, 24’’D x 24’’W x 20’’H $1340

Tip: Tables include Impression straight legs.

Laminate Zori Tables CYLAC36^@# Zori Laminate Round Coffee Table, 36” Diameter. 16”H $895CYLBC3060^@# Zori Laminate Elliptical Coffee Table, 30”D x 60”W x 16”H $1417CYLDE24^@# Zori Laminate Round End Table, 24” diameter, 20”H $757CYLEE2418^@# Zori Laminate Elliptical End Table, 24”D x 18”W x 20”H $757

Tip: End Tables and Round Coffee Table include X-bases. Elliptical Coffee Table includes Y-base with foot bar. Veneer Zori TablesCYVAC36^@# Zori Veneer Round Coffee Table, 36” Diameter. 16”H $1516CYVBC3060^@# Zori Veneer Elliptical Coffee Table, 30”D x 60”W x 16”H $2354CYVDE24^@# Zori Veneer Round End Table, 24” diameter, 20”H $1025CYVEE2418^@# Zori Veneer Elliptical End Table, 24”D x 18”W x 20”H $1025

Tip: End Tables and Round Coffee Table include X-bases. Elliptical Coffee Table includes Y-base with foot bar.

Occasional Tables (Complete Tables) (SIN 711-11)

219

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12)** no chargeJ Wilsonart Grey Elm (8201K-12)** no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium






Stain Match fee)

(^) Fabric Suffix List:> Free form fabric selection. Choose from

Camira Era, L2, Chicago, Manhattan, or Lucia fabrics.

Tip: To view fabric colors or to order samples go to www.camirafabrics.com/us. Tip: For COM yardage see page 16.

STEP 3 - Presentation Cabinet Only

Product Specifications:> Two standard laminates (Wilsonart Field Elm 7999K-12 and Grey Elm 8201K-12) have embossed wood grains. Their matching melamines do not. Casegoods (e.g. credenzas) have HPL tops and melamine cases.



Universal Triangle Corner Cabinets with Adjustable Shelf, 29"HTDAL318@# Laminate Triangle Corner Cabinet, 18”D x 18”W $1463TDAL324@# Laminate Triangle Corner Cabinet, 24”D x 24”W $1632 TDAV318@# Veneer Triangle Corner Cabinet, 18”D x 18”W $3658TDAV324@# Veneer Triangle Corner Cabinet, 24”D x 24”W $4081

Tip: Corner Cabinet is freestanding.

Universal Beverage Carts on Casters, 24"D x 30"W x 38"HLPWCARTA@# Laminate Universal Beverage Cart $1840LPWCARTV@# Veneer Universal Beverage Cart $4739

Presentation Cabinets, 48" x 48" with WhiteboardPCL4848@#^ Laminate Presentation Cabinet $2884PCV4848@#^ Veneer Presentation Cabinet $5633 Tip: Presentation Cabinet Includes: Porcelain Magnetic Whiteboard, Tackboards on doors, flip chart hooks. Mounted by screwing to wall. Attachment hardware not provided.

STEP 2

STEP 1 - if applicable(@) Pull Suffix List:

(B) Bar (A) Arc

Universal Support Furniture

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

4 - S

UP

PO

RT

FURN

ITU

RE

(SIN LISTED BELOW)

(SIN 711-3)

(SIN 711-9)

(SIN 711-11)

220

STEP 1 - Laminate Pac-Man, All-in-One Privacy/Modesty, and Clamp Screen Only

Privacy Screens/Modesty PanelsProduct Specifications> Clamp Privacy Screens and Modesty Panels 48”W and smaller include two clamps, 54”W and

wider include three clamps.

Ordering Information: > Clamp privacy screens 36”-72”W and Modesty Panels are screwed to the underside of the worksurface. > Clamp screens 24”-30”W are designed for side-to-side privacy and screw to the underside of the worksurface

front edge (only). Knob attachment is available, email [email protected]> For COM yardage, see page 16.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Pac-Man Universal Privacy Screens, Brackets included, 19"H x 30"DUPM# Laminate Pac-Man Privacy Screen $374UPM2 Frosted Acrylic Pac-Man Privacy Screen $384

Tip: 30”D Divider covers 22” of worksurface and hangs 8” off. 13” of screen is above worksurface, 4.75” below worksurface. Tip: Fits all 1.125" - 1.25" thick worksurfaces

(SIN 711-1)

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium



(?) Fabric Suffix List: Free form fabric selection. Choose from


Tip: To view fabric colors or to order samples go to www.camirafabrics.com/us.Tip: For COM yardage, see page 16.

STEP 1 - Tackable Fabrics

221


Universal Privacy Screens – 2-Sided Tackable Fabric, 17” H x 1” thickAAF24? Privacy Screen, Tackable Fabric, 24”W $328AAF30? Privacy Screen, Tackable Fabric, 30”W $380AAF36? Privacy Screen, Tackable Fabric, 36”W $391AAF42? Privacy Screen, Tackable Fabric, 42”W $422AAF48? Privacy Screen, Tackable Fabric, 48”W $435AAF54? Privacy Screen, Tackable Fabric, 54”W $562AAF60? Privacy Screen, Tackable Fabric, 60”W $574AAF66? Privacy Screen, Tackable Fabric, 66”W $587AAF72? Privacy Screen, Tackable Fabric, 72”W $598

Tip: Includes L-brackets, hardware and tackable screen (tackable fabric on both sides). Tip: Must be used in application where L-brackets can attach to the underside of worksurface. Tip: 13’’H version available in Grid section of Price List.

All-In-One Privacy/Modesty Screen, Double-Sided Laminate, .75" thickUG48# Desk Mounted Privacy/Modesty Screen, 48”W $371UG60# Desk Mounted Privacy/Modesty Screen, 60”W $456UG72# Desk Mounted Privacy/Modesty Screen, 72”W $533

Tip: Screen attaches to bottom of worksurface and sits behind surface. Screen is 13” above surface and 16” below surface.

Tackboards for Laminate All-in-One Privacy/Modesty Screens UG48T? Tackboard for use with UG48 Screen $199UG60T? Tackboard for use with UG60 Screen $233UG72T? Tackboard for use with UG72 Screen $277

Tip: Sits above worksurface and faces user. Tip: Tackboard is .75" thick. Tip: Not intended for use on Frosted Acrylic All-in-One Privacy/Modesty Screen.

All-in-One Privacy/Modesty Screen, Frosted AcrylicUGAC48 Frosted Acrylic Desk Mounted Privacy/Modesty 48”W $584UGAC60 Frosted Acrylic Desk Mounted Privacy/Modesty 60”W $669UGAC72 Frosted Acrylic Desk Mounted Privacy/Modesty 72”W $754

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

5 -

ACC

ESSO

RIES

(SIN 711-1)

222


STEP 1 - Steel Modesty

STEP 1 - Laminate Modesty(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +15% (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard (58, +20% 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +25%


Wilsonart virtual design library Y series laminates are

not included in the above upcharges. For pricing, contact [email protected].




STEP 1 - Tackable Fabrics

Ordering Information: > Replacement casters are sold 1 per package.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Fixed Modesty Panels - Perforated Metal with Trough, 9.5” HAMPT30^ Perforated Modesty Panel, 30” W $235AMPT36^ Perforated Modesty Panel, 36” W $238AMPT42^ Perforated Modesty Panel, 42” W $253AMPT48^ Perforated Modesty Panel, 48” W $257AMPT54^ Perforated Modesty Panel, 54” W $282AMPT60^ Perforated Modesty Panel, 60” W $289AMPT66^ Perforated Modesty Panel, 66” W $295AMPT72^ Perforated Modesty Panel, 72” W $304

Tip: Dimensions are actual. If installing between two legs, then purchase a 12” smaller size. If installing behind two legs, then purchase size to match worksurface. Tip: Freestanding Straights have radiused (2.5”) corners. Plan accordingly. Universal Pivoting Modesty Panel - Mesh, with Wire Management Pocket, 10” H, blackAMPM36 Mesh Modesty Panel, 36”W $276AMPM48 Mesh Modesty Panel, 48”W $292AMPM60 Mesh Modesty Panel, 60”W $303AMPM66 Mesh Modesty Panel, 66”W $333 AMPM72 Mesh Modesty Panel, 72”W $333

Tip: For use on Flip or Fixed tables.

Universal Pivoting Modesty Panels – Frosted Acrylic, 9.5"HLGBMB48 Acrylic Modesty Panel, 48”W $403LGBMB60 Acrylic Modesty Panel, 60”W $417LGBMB66 Acrylic Modesty Panel, 66”W $427LGBMB72 Acrylic Modesty Panel, 72”W $427


Universal Pivoting Modesty Panels – Perforated Steel, 9.5"HLGBMC48^ Perforated Modesty Panel, 48”W $347LGBMC60^ Perforated Modesty Panel, 60”W $358LGBMC66^ Perforated Modesty Panel, 66”W $370LGBMC72^ Perforated Modesty Panel, 72”W $370


Universal Pivoting Modesty Panels – Laminate, 9.5"HAMPL48# Laminate Modesty Panel, 48”W $273AMPL60# Laminate Modesty Panel, 60”W $288AMPL66# Laminate Modesty Panel, 66”W $299AMPL72# Laminate Modesty Panel, 72”W $329


Modesty Panels and Accessories (SIN 711-11)

223


Carts CART60 Cart for 60” Round Tables, 61”W x 31.25” D x 42.5 H $1613CART Cart for Rectangle Tables, 49”W x 31.25”D x 32.25”H $1613

Tip: Carts hold 5 Enwork folding tables. Includes 4” heavy duty casters and frame. Portions of the steel frame are covered by Neoprone rubber to help protect tables.

Tie Plates UTE 1/2” x 2.5” Tie plates - package of 5 $32

Support Plates USPT 2” x 7.5” Support plate - package of 1 $23

Grommets, 2.36" Diameter with Covers, Package of five GRMB Grommets, Black $61GRMG Grommets, Grey $61GRMW Grommets, White $61

Edging GREDG1 1mm Edging, price per foot $6GREDG3 3mm Edging, price per foot $8

Tip: Freeform color selection. Standard Enwork edge colors only. Ganging Bracket PackagesGBT2 Ganging brackets for tables with 3mm edge – package of 2, black only $50 Tip: GBT2 Ganging Package includes 2 ganging mechanisms (4 ganging parts). Use both ganging mechanisms (one package) to connect two 24-36”D tables. Tables 18” deep only require one ganging mechanism (1/2 package) per pair. Tip: Will not work on tables that have knife edge on all 4 sides.

Extended Leveler, Package of one UZGLIDE3 Extended 2” Leveler for Ambition Legs, Grid Legs, Concurrence, Sawhorse, $4 Solano (excluding height-adjustable), and Stealth basesUZGLIDE4 Extended 2” Leveler for Sensation and Zori Legs $4 Tip: Each package contains one leveler. Most bases require two levelers. Some exceptions include straight legs (one leveler) and drum bases (four levelers).

Replacement Casters for Legs and Bases, Package of one CSTSW 3" White twin wheel locking Caster for Sensation $19CSTSB 3" Black twin wheel locking Caster for Sensation $19CSTZB 3” Black twin wheel locking Caster for Zori $21

CSTMG 2-1/2" Grey locking Caster for Impression (except Command Centers and Lecterns) $19 and SawhorseCSTMB 2-1/2" Black locking Caster for Impression (except Command Centers and Lecterns) $19 and Sawhorse CSTVB 2" Black twin wheel locking Caster for Value legs (except Value Flip) $19CSTVFB 2-1/2" Black twin wheel locking Caster for Value Flip $19

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

5 -

ACC

ESSO

RIES

(SIN 711-11)

(SIN 711-1)

(SIN 711-11)

(SIN LISTED BELOW)

(SIN 711-2)

(SIN 711-11)

224

Product Specifications: > Wall-Mounted Glass Whiteboards are 3/16" tempered, low iron glass back-painted Super White.

Ordering Information: > Note on PO if wall-mount glass whiteboards are for use in side-by-side application. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Perimeter Wall-Mounted Rectangle Glass Whiteboards, 48"HDYD4848 Glass Whiteboard for Walls, 48”W $2172DYD4860 Glass Whiteboard for Walls, 60”W $2699DYD4872 Glass Whiteboard for Walls, 72”W $3258DYD4896 Glass Whiteboard for Walls, 96”W $4345 Tip: Note on PO if ordering for use in side-by-side application.

Perimeter Wall-Mounted Rectangle Glass Whiteboards with 15" Marker Tray, 48"HDYG4848 Glass Whiteboard for Walls, 15” Marker Tray, 48”W $2299DYG4860 Glass Whiteboard for Walls, 15” Marker Tray, 60”W $2827DYG4872 Glass Whiteboard for Walls, 15” Marker Tray, 72”W $3386DYG4896 Glass Whiteboard for Walls, 15” Marker Tray, 96”W $4472

Tip: Includes mounting cleat and hardware. No standoffs. Tip: Two-sided tape included to attach tray to whiteboard. Tip: Note on PO if ordering for use in side-by-side application.

Perimeter Wall-Mounted Rectangle Glass Magnetic Whiteboards, 48"HDYE4848 Glass Magnetic Whiteboard for Walls, 48”W $2884DYE4860 Glass Magnetic Whiteboard for Walls, 60”W $3589DYE4872 Glass Magnetic Whiteboard for Walls, 72”W $4326DYE4896 Glass Magnetic Whiteboard for Walls, 96”W $5769

Tip: Note on PO if ordering for use in side-by-side application.

Perimeter Wall-Mounted Rectangle Glass Magnetic Whiteboards with 15" Marker Tray, 48"HDYH4848 Glass Magnetic Whiteboard for Walls, 15” Marker Tray, 48”W $3011DYH4860 Glass Magnetic Whiteboard for Walls, 15” Marker Tray, 60”W $3716DYH4872 Glass Magnetic Whiteboard for Walls, 15” Marker Tray, 72”W $4453DYH4896 Glass Magnetic Whiteboard for Walls, 15” Marker Tray, 96”W $5895

Tip: Includes mounting cleat and hardware. No standoffs. Tip: Requires rare earth magnets. Tip: Two-sided tape included to attach tray to whiteboard. Tip: Note on PO if ordering for use in side-by-side application.

Rare Earth Magnets, Package of FiveDYMAGB Rare Earth Magnets, Black $154DYMAGR Rare Earth Magnets, Red $154DYMAGW Rare Earth Magnets, White $154

Perimeter Wall-Mounted Porcelain Magnetic Whiteboards with Aluminum Frame and Full Width Marker Tray, 48"HDYF4848 Porcelain Whiteboard with Frame for Walls, Marker Tray, 48”W $987DYF4860 Porcelain Whiteboard with Frame for Walls, Marker Tray, 60”W $1125DYF4872 Porcelain Whiteboard with Frame for Walls, Marker Tray, 72”W $1268DYF4896 Porcelain Whiteboard with Frame for Walls, Marker Tray, 96”W $1496

Tip: Includes mounting hardware.

Perimeter™ Porcelain & Glass Wall-Mount Whiteboards(SIN 711-9)

225

SUPPORT FURNITURE

ACCESSORIES

TOPS

BASES

POWER DATA

TABL

ES S

TEP

5 -

ACC

ESSO

RIES

Notes

Apex™

228

Notes

229

AP

EX S

TEEL

FU

RNIT

URE

Verticals and Pedestals have the following characteristics:> 18 gauge – front reinforcements, back reinforcements, bottom panels> 20gauge–top,drawerheads,frontfilleronped,caseback/sidesonmobileped> 22gauge–caseback/sidesonfixedpeds/verticals,rearslidemounts> 22gauge–doublewalldrawerbody(excludinghead)> Lock included> Levelersincluded(3/4”adjustment)> Verticalfilescomewithcounterweights> Mobile peds have counterweight included> Fullextensiondrawerslidesonfiledrawersandboxdrawers> Interlock rated at 100 pounds distributed load> Pedestals and Verticals have removable drawer fronts> Verticals have 16 gauge interlock channels> Mobile peds have 2 locking and 2 non-locking casters> Pedestalsaccommodateletterfilingfronttoback.Additionalbarsmustbeorderedtoaccommodatelegalfiling.

Laterals and Combination Cabinets have the following characteristics:> 18 gauge – top, bottom shelves, door supports> 20 gauge – back, sides, doors, and drawers> Lock included> Levelersincluded(1”adjustment)> LateralsandCombinationCabinetsmustbegangedtogetherorboltedtothewallorfloor.Counterweightsareavailableasanoption(fieldinstalled)

> Heavydutyfullextensiondrawerslideswithinterlockratedat175poundsof distributedload.

> Lateralscomewithside-to-sidehangingbarsforlegalandletterside-to-sidefiling

Double Door Cabinets and Heavy Duty Bookcases have the following characteristics:>18”deepforDoubleDoorCabinets>14"deepforHeavyDutyBookcases> 18 gauge – top, bottom, shelves, door supports> 20 gauge – back, sides, and doors> Lock included> Levelersincluded(1”adjustment)> Lockrodmaterial:steelfor4-hiand5-hi–16gaugesteellockcamon2-hiand3-hi> 11.75”clearancebetweenshelves–morespaceavailableattopandbottom> Shelvesadjustable1.5”up/down(in1/2”increments)> Shelfcapacityapproximately140lbs> Doorshaveself-closehinges> CabinetsandHeavyDutyBookcasestallerthan50”mustbegangedorboltedto thewall/floor.

Apex steel desk products have the following characteristics:> 18gaugedoublesidedconstructionendpanelswithlevelers(3/4”adjustment)> 7gaugereinforcingcornerbrackets> 18 gauge back panels> Highpressurelaminateworksurfacewithbackerandparticleboardcore(1-3/16”thick)> MDFcoreisavailableasaspecial> Center drawers are locking with 22 gauge drawers and 18 gauge brackets> Center drawers and peds are keyed alike within a single desk

Apex™ Specifications

230

Product Specifications: > See page 203 for detailed product characteristics> CombinationCabinetshaveafinishedmetaltop.FileCentersdonot.

Ordering Information: > DefaultKeyingisrandom.Seepage17forKeyed-alike(nocharge).> LockcoresareLLSeries.UMSerieslockcoresareavailableuponrequest.> Iforderinganadditionallaminatetopfortheseproducts,[email protected].> Laterals and Combination Cabinets must be ganged together or bolted to the wall or floor. Counterweights are available as an alternative. See next page for part numbers. Vertical Files come with required counterweights.> Designmodificationshavebeenmadeonthisproduct.Ifaddingontoapreviousorder,contactcustomer servicewithoriginalorderinformation.Enworkcannotguaranteethattheoriginalproductcanbematched.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneWArcticWhiteZ Other

Tip: Some Steelcase, Herman Miller, Knoll,Haworth,andAllsteelpaintsareavailablefor$350listfeeperorder.Call/emailforavailabilityofspecificcolors.Additionalcustompaints (e.g.TigerDryLac)[email protected].

STEP 1

STEP 2(#) Pull Suffix Style List:

(A) Arc (I) Integral


Combination Cabinets 18 36 51.5 A2CC183651^# ComboCabinet,51.5”H $256318 36 68 A2CC183667^# ComboCabinet,67.4”H $2940

File Centers Without Top for Under Worksurface Applications18 30 28 A2FC1830^# FileCenter,30”Wwithouttop $1378

Tip: Metaltopscanbeadded(asshown)[email protected]. Vertical Files – Letter 28 15 27.5 A2VF2^# VerticalFile,2Drawer $73128 15 39.5 A2VF3^# VerticalFile,3Drawer $104128 15 51.5 A2VF4^# VerticalFile,4Drawer $123728 15 63.5 A2VF5^# VerticalFile,5Drawer $1464 Tip: VerticalFilescomestandardwithfront-to-backfilebars.

Apex Steel Storage - Combo Cabinets, File Centers, Vertical Files(SIN 711-3)

231


Lateral Files – 2 High 18 30 27.5 A2Z230^# LateralFile,2Drawer,30”W $109618 36 27.5 A2Z236^# LateralFile,2Drawer,36”W $116818 42 27.5 A2Z242^# LateralFile,2Drawer,42”W $1286



Lateral Files – 5 High (4 Drawers and Fixed Shelf with Door) 18 30 67.4 A2Z530^# LateralFile,5high,30”W $228718 36 67.4 A2Z536^# LateralFile,5high,36”W $243818 42 67.4 A2Z542^# LateralFile,5high,42”W $2681 Tip: Topopeningisafixedshelf. Tip:Dooropensovercabinet. Counterweights for Lateral Files and Combination Cabinets A2ZCW23 Counterweightfor2High/3HighCabinet $211 A2ZCW45 Counterweightfor4High/5HighCabinet $159 File Bar Kits for Lateral Files A2ZBF Front-to-BackFileBarsforONEdrawer $35

Apex Steel Storage - Lateral Files

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-3)

232

Product Specifications: > BookcasesandHeavyDutyBookcaseshavelevelers.> HeavyDutyBookcaseshavereinforcedcorners.> Bookcasesonthispagehavebackpanelswithexposedweldsandbrackets.> Seepage203fordetailedproductcharacteristics.

Ordering Information:> Allbookcasesover50”Hmustbegangedorboltedtothefloor/wall.> Designmodificationshavebeenmadeonthisproduct.Ifaddingontoapreviousorder,contactcustomerservice withoriginalorderinformation.Enworkcannotguaranteethattheoriginalproductcanbematched.> Iforderinganadditionallaminatetopfortheseproducts,[email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Tip: Some Steelcase, Herman Miller, Knoll,Haworth,andAllsteelpaintsareavailablefor$350listfeeperorder.Call/emailforavailabilityofspecificcolors.Additionalcustompaints(e.g.TigerDryLac)[email protected].

STEP 1

Apex Steel Storage - Bookcases (SIN 711-3)

Notes

233


Heavy Duty Bookcases - 2 High, 14”D14 30 27.5 A2BHD230^ HeavyDutyBookcase,2high,30”W $78814 36 27.5 A2BHD236^ HeavyDutyBookcase,2high,36”W $82914 42 27.5 A2BHD242^ HeavyDutyBookcase,2high,42”W $868

Heavy Duty Bookcases - 3 High, 14”D 14 30 39.5 A2BHD330^ HeavyDutyBookcase,3high,30”W $88114 36 39.5 A2BHD336^ HeavyDutyBookcase,3high,36”W $92014 42 39.5 A2BHD342^ HeavyDutyBookcase,3high,42”W $960

Heavy Duty Bookcases - 4 High, 14”D 14 30 51.5 A2BHD430^ HeavyDutyBookcase,4high,30”W $98014 36 51.5 A2BHD436^ HeavyDutyBookcase,4high,36”W $102014 42 51.5 A2BHD442^ HeavyDutyBookcase,4high,42”W $1059

Heavy Duty Bookcases - 5 High, 14”D 14 30 68 A2BHD530^ HeavyDutyBookcase,5high,30”W $108514 36 68 A2BHD536^ HeavyDutyBookcase,5high,36”W $112414 42 68 A2BHD542^ HeavyDutyBookcase,5high,42”W $1163

Extra Shelves for Heavy Duty Bookcases 14 30 A2SH30^ Shelf,30”W $10114 36 A2SH36^ Shelf,36”W $10114 42 A2SH42^ Shelf,42”W $101

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-3) (SIN 711-3)

234

Ordering Information:> DefaultKeyingisrandom.Seepage17forKeyed-alike(nocharge).> LockcoresareLLSeries.UMSerieslockcoresareavailableuponrequest.> Allcabinetsover50”Hmustbegangedorboltedtothefloor/wall.> Seepage203fordetailedproductcharacteristics.> Designmodificationshavebeenmadeonthisproduct.Ifaddingontoapreviousorder,contactcustomerservicewith

originalorderinformation.Enworkcannotguaranteethattheoriginalproductcanbematched.> Iforderinganadditionallaminatetopfortheseproducts,[email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.



STEP 1


Double Door Cabinets - 2 High with One Adjustable Shelf18 30 27.5 A2SC230^# DoubleDoorCabinet,2highw/1adjustableshelf,30”W $118318 36 27.5 A2SC236^# DoubleDoorCabinet,2highw/1adjustableshelf,36”W $120318 42 27.5 A2SC242^# DoubleDoorCabinet,2highw/1adjustableshelf,42”W $1324

Double Door Cabinets - 3 High with Two Adjustable Shelves 18 30 39.5 A2SC330^# DoubleDoorCabinet,3highw/2adjustableshelves,30”W $137618 36 39.5 A2SC336^# DoubleDoorCabinet,3highw/2adjustableshelves,36”W $142418 42 39.5 A2SC342^# DoubleDoorCabinet,3highw/2adjustableshelves,42”W $1526

Double Door Cabinets - 4 High with Three Adjustable Shelves 18 30 51.5 A2SC430^# DoubleDoorCabinet,4highw/3adjustableshelves,30”W $166318 36 51.5 A2SC436^# DoubleDoorCabinet,4highw/3adjustableshelves,36”W $171518 42 51.5 A2SC442^# DoubleDoorCabinet,4highw/3adjustableshelves,42”W $1845

Double Door Cabinets - 5 High with Four Adjustable Shelves 18 30 67.4 A2SC530^# DoubleDoorCabinet,5highw/4adjustableshelves,30”W $194418 36 67.4 A2SC536^# DoubleDoorCabinet,5highw/4adjustableshelves,36”W $216318 42 67.4 A2SC542^# DoubleDoorCabinet,5highw/4adjustableshelves,42”W $2163

STEP 2(#) Pull Suffix Style List:

(A) Arc (I) Integral

Apex Steel Storage - Double Door Cabinets (SIN 711-3)

235

Notes AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-3)

236


Side-Access Storage Towers, 51"H24 15 51.5 A2NWT51L̂ # Side-AccessTower,F/F,LH $157124 15 51.5 A2NWT51R^# Side-AccessTower,F/F,RH $157124 15 51.5 A2NWD51L̂ # Side-AccessTower,B/B/F,LH $162524 15 51.5 A2NWD51R^# Side-AccessTower,B/B/F,RH $1625

Tip:Storageunitincludesoneadjustableshelf. Tip: Tower has 1 lock

Side-Access Storage Towers with Wardrobe, 51"H24 24 51.5 A2BT51L̂ # Side-AccessTower,Wardrobe,F/F,LH $237824 24 51.5 A2BT51R^# Side-AccessTower,Wardrobe,F/F,RH $237824 24 51.5 A2BTB51L̂ # Side-AccessTower,Wardrobe,B/B/F,LH $246324 24 51.5 A2BTB51R^# Side-AccessTower,Wardrobe,B/B/F,RH $2463 Tip:Displayunitincludesoneadjustableshelf. Tip: WardrobeandPedestalsarelocking. Tip: Tower has 2 locks

RH LH

RH LH

Product Specifications: > Boxdrawersandfiledrawershavefullextensionslides.

Ordering Information:> DefaultKeyingisrandom.Seepage17forKeyed-alike(nocharge).> LockcoresareLLSeries.UMSerieslockcoresareavailableuponrequest.> Designmodificationshavebeenmadeonthisproduct.Ifaddingontoapreviousorder,contactcustomerservice

withoriginalorderinformation.Enworkcannotguaranteethattheoriginalproductcanbematched.> Iforderinganadditionallaminatetopfortheseproducts,[email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


STEP 1

(#) Pull Suffix List:

STEP 2 - Towers and Open Top Peds Only

(#) Pull Suffix List:A Arc,Aluminum nochargeJ Arc,Aluminumw/add.Arcpullonlockcover+$36K Arc,Aluminumw/Totepull +$180B Bar nochargeL Barw/additionalBarpullonlockcover +$36M Barw/Totepull +$180R Rod no chargeP Rodw/additionalRodpullonlockcover +$36Q Rodw/Totepull +$180I Integral no chargeT Integralw/additionalArcpullonlockcover +$36U Integralw/Totepull +$180

STEP 2 - for Mobile Peds, Steel Top Only

(I) Integral(B) Bar (R) Rod

(A) Arc

Apex Steel Storage - Towers (SIN 711-3)

237

Apex Steel Storage - Pedestals

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-3) (SIN 711-3)


Pedestals - Open Top18 15 27.5 A2P18FF^#@ 18”DF/FPed-fullext.files $59118 15 27.5 A2P18BBFE^#@ 18”DB/B/FPed-fullext.boxes,fullext.file $61222 15 27.5 A2P24FF^#@ 24”DF/FPed-fullext.slide $56022 15 27.5 A2P24BBFE^#@ 24”DB/B/FPed-fullext.boxes,fullext.file $58128 15 27.5 A2P30FF^#@ 30”DF/FPed-fullext.slide $74728 15 27.5 A2P30BBFE^#@ 30”DB/B/FPed-fullext.boxes,fullext.file $809 Tip:Boxdrawersdonotincludedividers. Tip:IntegralpullnotavailableonLaminatefrontpedestals. Tip: 18”Dpedsdonotsupportlegalfiling. Tip:AsofMarch2015,24”Dpedestalsfitunder24”Apexshells.30”Dpedestalsfitunder30”Apexshells.

Mobile Pedestals - Steel Top18 15 22.3 A2MP18BFE^#@ 18”DB/FMobilePed-fullext.box,fullext.file $59018 15 27.2 A2MP18BBFE^#@ 18”DB/B/FMobilePed-fullext.box,fullext.file $70818 15 27.2 A2MP18FF^#@ 18”DF/FMobilePed-fullext.slide $65222 15 22.3 A2MP24BFE^#@ 24”DB/FMobilePed-fullext.box,fullext.file $60122 15 27.2 A2MP24BBFE^#@24”DB/B/FMobilePed-fullext.box,fullext.file $73222 15 27.2 A2MP24FF^#@ 24”DF/FMobilePed-fullext.slide $673

Tip: Castersrequirefieldinstallation.Counterweightincluded. Tip: Boxdrawersdonotincludedividers. Tip: IntegralpullnotavailableonLaminatefrontpedestals. Tip:BoxBoxFileandFileFilewillhitNWBRACEifNWBRACEissupportingtop. Tip: Additionallockbarpullortotepullavailableonmobilepeds.SeeStep2.

Seat Cushions for Apex Pedestals, Magnet Installation - 2"x15"x18" A2CUSH18 ApexPedCushion,18”,CamiraEraortheMillCollectionFabrics, $200 Specify Pattern & Color A2CUSHCOM18 ApexPedCushion,18”,COMFabric $200

Seat Cushions for Apex Pedestals, Magnet Installation - 2"x15"x22" A2CUSH24 ApexPedCushion,22”,CamiraEraortheMillCollectionFabrics, $222 Specify Pattern & Color A2CUSHCOM24 ApexPedCushion,22”,COMFabric $222

Tip: ToviewCamirafabricsortoordersamples,gotowww.camirafabrics.com/us. Tip: ForCOMyardage,seepage16.

Tote Pull

Pulling Options

Pull on Lock Bar

238

Product Specifications: > Heightis37”> Doorsrecedeintocabinet.> LockcoresareLLSeries.

Ordering Information:> DefaultKeyingisrandom.Seepage17forKeyed-alike(nocharge).> ForCOMyardageseepage16.> Designmodificationshavebeenmadeonthisproduct.Ifaddingontoapreviousorder,contactcustomerservice

withoriginalorderinformation.Enworkcannotguaranteethattheoriginalproductcanbematched.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Desk Mount Hutches - Single Door with Tackboard- 36 - A2CT36^# Hutch,36” $1646- 42 - A2CT42^# Hutch,42” $1696- 48 - A2CT48^# Hutch,48” $1729

Desk Mount Hutches - Double Door with Tackboard- 60 - A2CT60^# Hutch,60” $1970- 66 - A2CT66^# Hutch,66” $2002- 72 - A2CT72^# Hutch,72” $2065

Apex Steel Storage - Desk Mount Hutch & Lighting (SIN 711-2)



STEP 1

STEP 2 - If Applicable(#) Fabric Suffix List:Freeformfabricselection.ChoosefromCamiraEra,L2,Chicago,Manhattan,orLuciafabrics.

Tip: To view fabric colors or to order samples go to www.camirafabrics.com/us.Tip: ForCOMyardage,seepage16.

239

(*) Mounting Suffix List:A EnworkWallTracksB WallMount

STEP 1


Tip: SomeSteelcase,HermanMiller,Knoll,Haworth,andAllsteelpaintsareavailablefor$350listfeeperorder.Call/emailforavailabilityofspecificcolors.Additionalcustompaints(e.g.TigerDryLac)[email protected].

STEP 2 - Overhead Storage Cabinets Only

STEP 2 - Tackboards Only(#) Fabric Suffix List:Freeformfabricselection.ChoosefromCamiraEra,L2,Chicago,Manhattan,orLuciafabrics.

Tip: To view fabric colors or to order samplesgotowww.camirafabrics.com/us.Tip: ForCOMyardage,seepage16.


Overhead Storage Cabinet – Flat Door14 24 16.5 SBBMA24*^ OverheadStorageCabinet,24” $62814 30 16.5 SBBMA30*^ OverheadStorageCabinet,30” $63014 36 16.5 SBBMA36*^ OverheadStorageCabinet,36” $65414 42 16.5 SBBMA42*^ OverheadStorageCabinet,42” $68514 48 16.5 SBBMA48*^ OverheadStorageCabinet,48” $72314 60 16.5 SBBMA60*^ OverheadStorageCabinet,60” $907

Tip: Dooropensovercabinet.

Tackboards for Enwork Wall Tracks or Wall Mount Cabinets, 19"H- 24 19 WTKB1924*# Tackboard,24” $255- 30 19 WTKB1930*# Tackboard,30” $261- 36 19 WTKB1936*# Tackboard,36” $278- 42 19 WTKB1942*# Tackboard,42” $286- 48 19 WTKB1948*# Tackboard,48” $290- 60 19 WTKB1960*# Tackboard,60” $322

Tip: Pick from Camira Mill L2, Mill Chicago, or Lucia fabrics and freeformcolor. Tip:Productwillcomewithbracketsifwalltracksarespecified, velcroifwallmountisspecified. Tip:ForCOMyardageseepage16.

Wall Tracks for Enwork Tackboards, Package of Two, Black- - 35 WTR352 WallTrack,35” $67- - 60 WTR602 WallTrack,60” $112

Tip: AttachmenthardwareisNOTincluded.3/8”togglebolts arerecommended.

Ordering Information:> ProductshipsKD.> Defaultkeyingoptionisrandom.Seepage17fororderingkeyed-alike(nocharge).> LockcoresareLL(nickelonly).> Installationhardwareisincluded.> TackboardInstallationhardwareincluded.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Apex Steel Storage - Overhead Storage, Tackboards, & Wall Tracks

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-2)

(SIN LISTED BELOW)

(SIN 711-11)

(SIN 711-9)

(SIN 711-9)

240

STEP 1

(@) Pull Suffix List:STEP 2 - If Applicable



STEP 3

(*) Cable Management Option List:N None nochargeC Grommet(center,rear) +$19L Grommet(left,rear) +$19R Grommet(right,rear) +$19D Grommets(leftandright,rear) +$38

Tip: Agrommetcannotbespecifiedoverapedestal.

(#) Laminate Suffix List:A WilsonartKensingtonMaple(10776-60)D WilsonartPinnacleWalnut(7992-38)E WilsonartFashionGrey(D381-60)H WilsonartFieldElm(7999K-12)J WilsonartGreyElm(8201K-12)K WilsonartEbonyRecon(7997-38)M WilsonartFrostyWhite(1573-60)O WilsonartCrispLinen(4942-38)P WilsonartSlateGrey(D91-60)Q WilsonartPorticoTeak(8210K-28)R WilsonartBlack(1595-60)V WilsonartRiverCherry(7937-38)WWilsonartDesignerWhite(D354-60)3 FormicaNeutralTwill(8826-58)4 FormicaBleachedLegno(8845-58)7 FormicaSelectCherry(7759-43)X WilsonartNon-Premiumlaminates +$40 (-38,-60).Ordersof100+unitshave

noupcharge.Y FormicaNon-PremiumStandard +$55 (58,43,MC,SPandNTfinishes)and WilsonartPremium(-07,-12,-18,-28,

-52,-78)laminates.Z PioniteNon-Premium,Nevamar +$79

Non-Premium,FormicaPremium(WR, 42,77,46,RDFinishes),andFormica 459-90BriteWhitewhiteboardlaminate.


STEP 4

(I)Integral(A)Arc

D1

W1

D1

W1

D1 W1 O Part Number Description List Price (US$)

Single Pedestal Desks - Ped Supported, B/B/F, with Center Drawer, LH24 72 LH A2PL2472&*@^# SinglePedDesk,LH,24”x72” $215130 48 LH A2PL3048&*@^# SinglePedDesk,LH,30”x48” $210730 60 LH A2PL3060&*@^# SinglePedDesk,LH,30”x60” $225730 66 LH A2PL3066&*@^# SinglePedDesk,LH,30”x66” $229330 72 LH A2PL3072&*@^# SinglePedDesk,LH,30”x72” $231836 72 LH A2PL3672&*@^# SinglePedDesk,LH,with6’’ $2378 overhang,36"x72"

Single Pedestal Desks - Ped Supported, B/B/F, with Center Drawer, RH 24 72 RH A2PR2472&*@^# SinglePedDesk,RH,24”x72” $215130 48 RH A2PR3048&*@^# SinglePedDesk,RH,30”x48” $210730 60 RH A2PR3060&*@^# SinglePedDesk,RH,30”x60” $225730 66 RH A2PR3066&*@^# SinglePedDesk,RH,30”x66” $229330 72 RH A2PR3072&*@^# SinglePedDesk,RH,30”x72” $231836 72 RH A2PR3672&*@^# SinglePedDesk,RH,with6’’ $2378 overhang,36”x72”

Double Pedestal Desks - Ped Supported, B/B/F and F/F, with Center Drawer 30 60 - A2PD3060&*@^# DoublePedDesk,30”x60” $253130 66 - A2PD3066&*@^# DoublePedDesk,30”x66” $256830 72 - A2PD3072&*@^# DoublePedDesk,30”x72” $259436 72 - A2PD3672&*@^# DoublePedDesk,with6’’ $2731 overhang,36”x72”

Apex Ped Supported Desks (SIN 711-2)

Product Specifications:> Desksaresteelwithlaminateworksurfaceandfull-heightbackpanels.> LockcoresareLLSeries.> Heightis29”.

Ordering Information:> 1/2heightbackpanelsareavailable(nocharge).Add"Y”infrontofpartnumber.3/4height backpanelsarealsoavailable(nocharge).Add“Z”infrontofpartnumber.>Agrommetcannotbespecifiedoverapedestal.> PedsandCenterDrawersareKeyedalike.> Shipsassembled.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

241

W1D1

D1W1

W1D1


Single Pedestal Returns - Ped Supported, F/F, 24"D, LH24 36 LH A2FL2436&*@^# SinglePedReturns,LH,36” $139724 42 LH A2FL2442&*@^# SinglePedReturns,LH,42” $139724 48 LH A2FL2448&*@^# SinglePedReturns,LH,48” $1429 Single Pedestal Returns - Ped Supported, F/F, 24"D, RH 24 36 RH A2FR2436&*@^# SinglePedReturns,RH,36” $139724 42 RH A2FR2442&*@^# SinglePedReturns,RH,42” $139724 48 RH A2FR2448&*@^# SinglePedReturns,RH,48” $1429

Tip: Returnsareintendedtobeusedwith66”and72”desks.Centerdrawerswillbe partiallycoveredbyreturnworksurfaceon60”andsmallerdeskwidths. Tip:AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges,andD-tops havechanged.Previousversionswillnotmix.

Return Shells, 24"D 24 36 LH A2HL2436&*^# ReturnShells,LH,36” $91224 42 LH A2HL2442&*^# ReturnShells,LH,42” $91224 48 LH A2HL2448&*^# ReturnShells,LH,48” $939 24 36 RH A2HR2436&*^# ReturnShells,RH,36” $91224 42 RH A2HR2442&*^# ReturnShells,RH,42” $91224 48 RH A2HR2448&*^# ReturnShells,RH,48” $939

Tip:Returnsareintendedtobeusedwith66”and72”desks.Centerdrawerswillbe partiallycoveredbyreturnworksurfaceon60”andsmallerdeskwidths. Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges,andD-tops havechanged.Previousversionswillnotmix.

Bridges, 24"D 24 42 - A2BR2442&*^# Bridge,42” $73424 48 - A2BR2448&*^# Bridge,48” $780

Tip:Bridgecannotconnecttoped,onlyendpanel. Tip:AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges,andD-tops havechanged.Previousversionswillnotmix.

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-2)

242

STEP 1




STEP 3


Tip: Agrommetcannotbespecified overapedestal.

(#) Laminate Suffix List:A WilsonartKensingtonMaple(10776-60)D WilsonartPinnacleWalnut(7992-38)E WilsonartFashionGrey(D381-60)H WilsonartFieldElm(7999K-12)J WilsonartGreyElm(8201K-12)K WilsonartEbonyRecon(7997-38)MWilsonartFrostyWhite(1573-60)O WilsonartCrispLinen(4942-38)P WilsonartSlateGrey(D91-60)Q WilsonartPorticoTeak(8210K-28)R WilsonartBlack(1595-60)V WilsonartRiverCherry(7937-38)WWilsonartDesignerWhite(D354-60)3 FormicaNeutralTwill(8826-58)4 FormicaBleachedLegno(8845-58)7 FormicaSelectCherry(7759-43)X WilsonartNon-Premiumlaminates +$40 (-38,-60).Ordersof100+unitshave





STEP 4

(I)Integral(A)Arc

D1

W1

D1

W1


Single Pedestal Credenzas - Ped Supported, F/F, 24"D, LH24 60 LH A2ML2460&*@^# Credenza,Singleped,LH,60” $161424 66 LH A2ML2466&*@^# Credenza,Singleped,LH,66” $173824 72 LH A2ML2472&*@^# Credenza,Singleped,LH,72” $1806 Single Pedestal Credenzas - Ped Supported, F/F, 24"D, RH 24 60 RH A2MR2460&*@^# Credenza,Singleped,RH,60” $161424 66 RH A2MR2466&*@^# Credenza,Singleped,RH,66” $173824 72 RH A2MR2472&*@^# Credenza,Singleped,RH,72” $1806

Double Pedestal Credenzas - Ped Supported, B/B/F and F/F, 24"D 24 60 - A2MD2460&*@^# Credenza,Doubleped,60” $185324 66 - A2MD2466&*@^# Credenza,Doubleped,66” $189824 72 - A2MD2472&*@^# Credenza,Doubleped,72” $2026

Apex Ped Supported Credenzas (SIN 711-2)

Product Specifications:> Desksaresteelwithlaminateworksurfaceandfull-heightbackpanels.> LockcoresareLLSeries.> Heightis29"

Ordering Information:> 1/2heightbackpanelsareavailable(nocharge).Add"Y”infrontofpartnumber.3/4height backpanelsarealsoavailable(nocharge).Add“Z”infrontofpartnumber.> Agrommetcannotbespecifiedoverapedestal.> PedsandCenterDrawersareKeyedalike.> Ships assembled> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

243


Metal Center Drawer, locking, 19.2”W x 17.2”D17.2 19.2 A2MCD^ MetalCenterDrawer $265

Drawer Accessories - - A2PHFB Side-to-SideFileBarsforONEFiledrawer(qty.2bars) $66- - CTRAY-CA CoinTray $18- - A2PBXD BoxDrawerDivider,Black $19

(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneWArcticWhiteZ OtherTip: Some Steelcase, Herman Miller, Knoll,Haworth,andAllsteelpaints areavailablefor$350listfeeperorder.Call/emailforavailabilityofspe-cificcolors.Additionalcustompaints(e.g.TigerDryLac)[email protected].

STEP 1

Apex Center Drawer & Accessories

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-3)

(SIN 711-3)(SIN 711-2)(SIN 711-3)

(SIN LISTED BELOW)


244

STEP 1




STEP 3








STEP 4

(I)Integral(A)Arc


Ordering Information:> PedsandCenterDrawersareKeyedalike.> Pedscanhaveeithersteelorlaminatefronts.SeeStep1.> Shipsassembled.> DeskShellsalwayshaveendpanels.Theyalsohaveonepiecebackpanels.1/2and3/4heightarealso

availableatnocharge.Put“Y”infrontofpartnumberfor1/2heightand"Z"for3/4height.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1

W1


Desk Shell with B/B/F Pedestal and Center Drawer, LH24 72 LH A2DL2472&*@^# DeskShell,18”Dped,LH,24”x72” $225630 48 LH A2DL3048&*@^# DeskShell,24”Dped,LH,30”x48” $206030 60 LH A2DL3060&*@^# DeskShell,24”Dped,LH,30”x60” $221030 66 LH A2DL3066&*@^# DeskShell,24”Dped,LH,30”x66” $224830 72 LH A2DL3072&*@^# DeskShell,24”Dped,LH,30”x72” $230636 72 LH A2DL3672&*@^# DeskShellwith6’’overhang, $2386 24”Dped,LH,36”x72” Desk Shell with B/B/F Pedestal and Center Drawer, RH24 72 RH A2DR2472&*@^# DeskShell,18”Dped,RH,24”x72” $225630 48 RH A2DR3048&*@^# DeskShell,24”Dped,RH,30”x48” $206030 60 RH A2DR3060&*@^# DeskShell,24”Dped,RH,30”x60” $221030 66 RH A2DR3066&*@^# DeskShell,24”Dped,RH,30”x66” $224830 72 RH A2DR3072&*@^# DeskShell,24”Dped,RH,30”x72” $230636 72 RH A2DR3672&*@^# DeskShellwith6’’overhang, $2386 24”Dped,RH,36”x72”

Tip: Thedesksonthispagehaveendpanelsandfullwidthbackpanels. Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells, Bridges,andD-topshavechanged.Previousversionswillnotmix. Tip: If you want full depth peds, shells and peds must be orderedseparately.

Apex Desk Shells (SIN 711-2)

245

D1

W1

D1

W1


Desk Shell with 24"D B/B/F Pedestal, 24"D F/F Pedestal, and Center Drawer30 60 - A2E3060&*@^# DeskShell,DoublePed,30”x60” $273330 66 - A2E3066&*@^# DeskShell,DoublePed,30”x66” $277030 72 - A2E3072&*@^# DeskShell,DoublePed,30”x72” $283236 72 - A2E3672&*@^# DeskShellwith6’’overhang,DoublePed,36”x72” $2910

Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges, andD-topshavechanged.Previousversionswillnotmix. Tip: Ifyouwantfulldepthpeds,shellsandpedsmustbeorderedseparately.

Desk Shell (no drawer), 24”D and 30”D24 48 - A2T2448&*^# DeskShell,24”x48” $107224 60 - A2T2460&*^# DeskShell,24”x60” $117524 66 - A2T2466&*^# DeskShell,24”x66” $123424 72 - A2T2472&*^# DeskShell,24”x72” $1323 30 48 - A2T3048&*^# DeskShell,30”x48” $115730 60 - A2T3060&*^# DeskShell,30”x60” $130630 66 - A2T3066&*^# DeskShell,30”x66” $134130 72 - A2T3072&*^# DeskShell,30”x72” $1401 36 72 - A2T3672&*^# DeskShellwith6’’overhang,36”x72” $1481

Tip:LowerpricedPedSupportedDesksarefoundearlierinthissection. Tip:Thedesksonthispagehaveendpanelsandfullwidthbackpanels. Tip:AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges, andD-topshavechanged.Previousversionswillnotmix.

AP

EX S

TEEL

FU

RNIT

URE

(SIN 711-2)

246


Ordering Information:> 1/2heightbackpanelsareavailable(nocharge).Add"Y”infrontofpartnumber.3/4height backpanelsarealsoavailable(nocharge).Add“Z”infrontofpartnumber.> Pedscanhaveeithersteelorlaminatefronts.SeeStep1.> PedsandCenterDrawersareKeyedalike.> Shipsassembled.> Whenorderingpedsforshellsdropdownasize(e.g.put18”Dpedsinto24”Dshells).> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1W1

D1

W1

W1

D1


Return Shells, 24"D24 36 LH A2HL2436&*^# ReturnShellLH,36” $91224 42 LH A2HL2442&*^# ReturnShellLH,42” $91224 48 LH A2HL2448&*^# ReturnShellLH,48” $93924 36 RH A2HR2436&*^# ReturnShell,RH,36” $91224 42 RH A2HR2442&*^# ReturnShell,RH,42” $91224 48 RH A2HR2448&*^# ReturnShell,RH,48” $939

Tip:Returnsareintendedtobeusedwith66”and72”desks.Center drawerswillbepartiallycoveredbyreturnworksurfaceon60”and smallerdeskwidths. Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells, Bridges,andD-topshavechanged.Previousversionswillnotmix.

Return Shells, 24"D with 18"D F/F Pedestal24 36 LH A2KL2436&*@^# ReturnShellwithped,LH,36” $143824 42 LH A2KL2442&*@^# ReturnShellwithped,LH,42” $143824 48 LH A2KL2448&*@^# ReturnShellwithped,LH,48” $146524 36 RH A2KR2436&*@^# ReturnShellwithped,RH,36” $143824 42 RH A2KR2442&*@^# ReturnShellwithped,RH,42” $143824 48 RH A2KR2448&*@^# ReturnShellwithped,RH,48” $1465 Tip:Returnsareintendedtobeusedwith66”and72”desks.Center drawerswillbepartiallycoveredbyreturnworksurfaceon60”and smallerdeskwidths. Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells, Bridges,andD-topshavechanged.Previousversionswillnotmix. Tip: Ifyouwantfulldepthpeds,shellsandpedsmustbeorderedseparately.

Bridges, 24"D24 42 - A2BR2442&*^# Bridge,42” $73424 48 - A2BR2448&*^# Bridge,48” $780

Tip:GrommetspecifiedinStep2. Tip: Bridgecannotconnecttoped,onlyendpanel. Tip:AsofMarch2015,dimensionsoftheDeskShells,ReturnShells, Bridges,andD-topshavechanged.Previousversionswillnotmix.

Apex Desk Shells (SIN 711-2)

STEP 1



Tip:SomeSteelcase,HermanMiller,Knoll,Haworth,andAllsteelpaintsareavailablefor$350listfeeperorder.Call/emailforavailabilityofspecificcolors.Additionalcustompaints(e.g.TigerDryLac)[email protected].

STEP 3


Tip:Agrommetcannotbespecified overapedestal.






STEP 4

(I)Integral(A)Arc

247

D1

W1

D1

W1


D-Top Desks, 30"D 30 48 - A2L3048&*^# D-TopDesk,48” $124130 60 - A2L3060&*^# D-TopDesk,60” $131430 66 - A2L3066&*^# D-TopDesk,66” $136630 72 - A2L3072&*^# D-TopDesk,72” $1476

Tip: Attachestoreturnorbridgetoforma“U”station Tip: AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges, andD-topshavechanged.Previousversionswillnotmix.

D-Top Desks with ¾ Modesty, 30"D 30 48 - A2JR3048&*^# D-TopDeskwith3/4modesty,RH,48” $131930 60 - A2JR3060&*^# D-TopDeskwith3/4modesty,RH,60” $140530 66 - A2JR3066&*^# D-TopDeskwith3/4modesty,RH,66” $147430 72 - A2JR3072&*^# D-TopDeskwith3/4modesty,RH,72” $159930 48 - A2JL3048&*^# D-TopDeskwith3/4modesty,LH,48” $131930 60 - A2JL3060&*^# D-TopDeskwith3/4modesty,LH,60” $140530 66 - A2JL3066&*^# D-TopDeskwith3/4modesty,LH,66” $147430 72 - A2JL3072&*^# D-TopDeskwith3/4modesty,LH,72” $1599 Tip:Attachestoreturnorbridgetoforma“U”station Tip:CanbereconfiguredbetweenLHandRHinfield. Tip:AsofMarch2015,dimensionsoftheDeskShells,ReturnShells,Bridges, andD-topshavechanged.Previousversionswillnotmix.

Full-Height Back Panels (Component Part) - 60 - A2ZBP260^ BackPanelforuseon2PedDesks,60”W $161- 66 - A2ZBP266^ BackPanelforuseon2PedDesks,66”W $189- 72 - A2ZBP272^ BackPanelforuseon2PedDesks,72”W $210 - 60 - A2ZBP160^ BackPanelforuseon1PedDesk,60”W $223- 66 - A2ZBP166^ BackPanelforuseon1PedDesk,66”W $250- 72 - A2ZBP172^ BackPanelforuseon1PedDesk,72”W $277 - 36 - A2ZRBP136^ BackPanelforuseon1PedReturn,36”W $142- 42 - A2ZRBP142^ BackPanelforuseon1PedReturn,42”W $161- 48 - A2ZRBP148^ BackPanelforuseon1PedReturn,48”W $182 Tip: 1/2heightbackpanelsareavailable(nocharge).Add“Y”infrontofpartnumber. 3/4heightbackpanelsarealsoavailable(nocharge).Add“Z”infrontofpartnumber.

End Panel (Component Part)24 - - A2ZEP24^ ApexEndPanel,24”D $18430 - - A2ZEP30^ ApexEndPanel,30”D $216

RHLH

D-Top Left-Handed Application D-Top Right-Handed Application

AP

EX S

TEEL

FU

RNIT

URE

(SIN LISTED BELOW)

(SIN 711-2)

(SIN 711-2)

(SIN 711-3)

(SIN 711-3)

249

Affinity™

250

Reception Shells

Return Shells

Corner ShellsCurved Corner

Rectangle

ExtendedCurvedCorner

VisitorRectangular Bow

Full Desks

Straight Base Desk ShellBridgeShellA BridgeShellB

Conference ShellsJetty “D-Top”Angled"P"

Other SupportsL Panel T Panel

Other Hutch ComponentsWall Mount

Designer Series HutchesAluminumwithFrosted Glass

RectangularDoors Cubby Hutch

Affinity™ Overview

251

Laterals

PedestalsBox-Box-FileFile-File Mobile-Box-File

Double Door Cabinets

Corner Cabinets Bookcases2-High 3-High 4-High 5-High 6-High

Combination Cabinets TowersWardrobe Tower withStorageDoor

Wardrobe Tower withSide-Access

Product Specifications: • Corners and bridge shells come standard with oval-shaped grommets.Additionalgrommetscanberequestedfora chargeof$36listpergrommet.

• Hutches offer cable management between the hutch back panelandtheworksurface.

• Fulldepth,fullextensionballbearingsides• Highqualitycamlockanddowelconstruction• 110 degree hinges included on overhead storage• Adjustabledoorhinges• Keyedalike• 3mmedge/1mmonsomeparts

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

252

(&) Back Panel Suffix List:F FullHeightBackPanelT Three-QuarterHeightBackPanelE ShortBackPanel(foroutletaccess)

STEP 1

STEP 3

(@) Casegood (Shell) Laminate Suffix List: A WilsonartKensingtonMaple(10776-60) nochargeD WilsonartPinnacleWalnut(7992-38) nochargeE WilsonartFashionGrey(D381-60) nochargeH WilsonartFieldElm(7999K-12)** nochargeJ WilsonartGreyElm(8201K-12)** nochargeK WilsonartEbonyRecon(7997-38) nochargeM WilsonartFrostyWhite(1573-60) nochargeP WilsonartSlateGrey(D91-60) nochargeQ WilsonartPorticoTeak(8210K-28) nochargeR WilsonartBlack(1595-60) nochargeV WilsonartRiverCherry(7937-38) nochargeW WilsonartDesignerWhite(D354-60) nocharge3 FormicaNeutralTwill(8826-58) nocharge4 FormicaBleachedLegno(8845-58) nocharge7 FormicaSelectCherry(7759-43) nochargeX WilsonartNon-Premiumlaminates(-38, +$264 -60).Ordersof100+unitshavenoupcharge.Y FormicaNon-PremiumStandard(58,43, +$308 MC,SPandNTfinishes)andWilsonart Premium(-07,-12,-18,-28,-52,-78)laminates.Z PioniteNon-Premium,NevamarNon- +$332 Premium,FormicaPremium(WR,42,77, 46,RDFinishes),andFormica459-90Brite Whitewhiteboardlaminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].**Seeproductspecificationsattopofpage.

STEP 4

(#) Worksurface Laminate Suffix List: A WilsonartKensingtonMaple(10776-60)D WilsonartPinnacleWalnut(7992-38)E WilsonartFashionGrey(D381-60)H WilsonartFieldElm(7999K-12)**J WilsonartGreyElm(8201K-12)**K WilsonartEbonyRecon(7997-38)M WilsonartFrostyWhite(1573-60)O WilsonartCrispLinen(4942-38)P WilsonartSlateGrey(D91-60)Q WilsonartPorticoTeak(8210K-28)R WilsonartBlack(1595-60)V WilsonartRiverCherry(7937-38)W WilsonartDesignerWhite(D354-60)3 FormicaNeutralTwill(8826-58)4 FormicaBleachedLegno(8845-58)7 FormicaSelectCherry(7759-43)X WilsonartNon-Premiumlaminates(-38, +$40 -60).Ordersof100+unitshavenoupcharge.Y FormicaNon-PremiumStandard(58,43, +$55 MC,SPandNTfinishes)andWilsonart Premium(-07,-12,-18,-28,-52,-78)laminates.Z PioniteNon-Premium,NevamarNon- +$79 Premium,FormicaPremium(WR,42,77,46, RDFinishes),andFormica459-90BriteWhite whiteboardlaminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].**Seeproductspecificationsattopofpage.

STEP 2 (*) Cable Management Option List:N None nochargeC Grommet(center,rear) +$19L Grommet(left,rear) +$19R Grommet(right,rear) +$19


Product Specifications: > 3mmEdge> Heightis29”> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.

Theirmatchingmelaminesdonot.Casegoods(e.g.credenzas)haveHPLtopsandmelaminecases.

Ordering Information: > ShipsKD> A freight fee of $100 is assessed on orders less than $1000 net. See page 13.

D1

W1

Rectangular

D2

Bow

D1

W1

D2

D1 D2 W1 Part Number Description List Price (US$)

Rectangle Desk Shells, 24"D24 24 48 DAA2448&*#@ RectangleDeskShell,24”x48” $95724 24 60 DAA2460&*#@ RectangleDeskShell,24”x60” $103324 24 66 DAA2466&*#@ RectangleDeskShell,24”x66” $111324 24 72 DAA2472&*#@ RectangleDeskShell,24”x72” $111324 24 84 DAA2484&*#@ RectangleDeskShell,24”x84” $144324 24 96 DAA2496&*#@ RectangleDeskShell,24”x96” $1443

Rectangle Desk Shells, 30"D 30 30 48 DAA3048&*#@ RectangleDeskShell,30”x48” $106430 30 60 DAA3060&*#@ RectangleDeskShell,30”x60” $115430 30 66 DAA3066&*#@ RectangleDeskShell,30”x66” $124430 30 72 DAA3072&*#@ RectangleDeskShell,30”x72” $124430 30 84 DAA3084&*#@ RectangleDeskShell,30”x84” $148830 30 96 DAA3096&*#@ RectangleDeskShell,30”x96” $1488 Rectangle Desk Shells, 36"D 30 36 48 DAA3648&*#@ RectangleDeskShell,30”x48”shellw/6”overhang,36”x48” $120030 36 60 DAA3660&*#@ RectangleDeskShell,30”x60”shellw/6”overhang,36”x60” $129730 36 66 DAA3666&*#@ RectangleDeskShell,30”x66”shellw/6”overhang,36”x66” $140030 36 72 DAA3672&*#@ RectangleDeskShell,30”x72”shellw/6”overhang,36”x72” $1400 Bow Front Desk Shells, 24"D 24 30 48 DAB2448&*#@ BowFrontDeskShell,24”x48”shellw/6”overhang,30”x48” $114624 30 60 DAB2460&*#@ BowFrontDeskShell,24”x60”shellw/6”overhang,30”x60” $124824 30 72 DAB2472&*#@ BowFrontDeskShell,24”x72”shellw/6”overhang,30”x72” $1356 Bow Front Desk Shells, 30"D 30 36 48 DAB3048&*#@ BowFrontDeskShell,30”x48”shellw/6”overhang,36”x48” $126230 36 60 DAB3060&*#@ BowFrontDeskShell,30”x60”shellw/6”overhang,36”x60” $142330 36 72 DAB3072&*#@ BowFrontDeskShell,30”x72”shellw/6”overhang,36”x72” $1535

Affinity Modular Desk Shells (SIN 711-8)

253


STEP 1

STEP 2

(@) Casegood (Shell) Laminate Suffix List: A WilsonartKensingtonMaple(10776-60)nochargeD WilsonartPinnacleWalnut(7992-38) nochargeE WilsonartFashionGrey(D381-60) nochargeH WilsonartFieldElm(7999K-12)** nochargeJ WilsonartGreyElm(8201K-12)** nochargeK WilsonartEbonyRecon(7997-38) nochargeM WilsonartFrostyWhite(1573-60) nochargeP WilsonartSlateGrey(D91-60) nochargeQ WilsonartPorticoTeak(8210K-28) nochargeR WilsonartBlack(1595-60) nochargeV WilsonartRiverCherry(7937-38) nochargeW WilsonartDesignerWhite(D354-60) nocharge3 FormicaNeutralTwill(8826-58) nocharge4 FormicaBleachedLegno(8845-58) nocharge7 FormicaSelectCherry(7759-43) nochargeX WilsonartNon-Premiumlaminates(-38, +$264 -60).Ordersof100+unitshavenoupcharge.Y FormicaNon-PremiumStandard(58,43, +$308 MC,SPandNTfinishes)andWilsonart Premium(-07,-12,-18,-28,-52,-78)laminates.Z PioniteNon-Premium,NevamarNon- +$332 Premium,FormicaPremium(WR,42,77, 46,RDFinishes),andFormica459-90Brite Whitewhiteboardlaminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].**Seeproductspecificationsattopofpage.

STEP 3


STEP 4(*) Cable Management Option List:N None nochargeC Grommet(center,rear) +$19L Grommet(left,rear) +$19R Grommet(right,rear) +$19


D1W1

Rectangle

D1 D2 W1 O Part Number Description List Price (US$)

Rectangle Return Shells, 24"D, RH24 - 30 RH DCAR2430&#@* RectangleReturnShell,RH,24”x30” $72224 - 36 RH DCAR2436&#@* RectangleReturnShell,RH,24”x36” $76524 - 42 RH DCAR2442&#@* RectangleReturnShell,RH,24”x42” $82424 - 48 RH DCAR2448&#@* RectangleReturnShell,RH,24”x48” $85924 - 60 RH DCAR2460&#@* RectangleReturnShell,RH,24”x60” $944

Rectangle Return Shells, 30"D, RH 30 - 30 RH DCAR3030&#@* RectangleReturnShell,RH,30”x30” $79530 - 36 RH DCAR3036&#@* RectangleReturnShell,RH,30”x36” $82930 - 42 RH DCAR3042&#@* RectangleReturnShell,RH,30”x42” $89630 - 48 RH DCAR3048&#@* RectangleReturnShell,RH,30”x48” $93830 - 60 RH DCAR3060&#@* RectangleReturnShell,RH,30”x60” $1029 Rectangle Return Shells, 24"D, LH 24 - 30 LH DCAL2430&#@* RectangleReturnShell,LH,24”x30” $72224 - 36 LH DCAL2436&#@* RectangleReturnShell,LH,24”x36” $76524 - 42 LH DCAL2442&#@* RectangleReturnShell,LH,24”x42” $82424 - 48 LH DCAL2448&#@* RectangleReturnShell,LH,24”x48” $85924 - 60 LH DCAL2460&#@* RectangleReturnShell,LH,24”x60” $944 Rectangle Return Shells, 30"D, LH 30 - 30 LH DCAL3030&#@* RectangleReturnShell,LH,30”x30” $79530 - 36 LH DCAL3036&#@* RectangleReturnShell,LH,30”x36” $82930 - 42 LH DCAL3042&#@* RectangleReturnShell,LH,30”x42” $89630 - 48 LH DCAL3048&#@* RectangleReturnShell,LH,30”x48” $93830 - 60 LH DCAL3060&#@* RectangleReturnShell,LH,30”x60” $1029

Affinity Return Shells



Ordering Information: > SelectgrommetsforRectangleShellsinStep4.> Standardgraindirectionrunslefttoright.Tospecifyfronttoback(matching)graindirectionon

[email protected].> A freight fee of $100 is assessed on orders less than $1000 net. See page 13.

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

254



Ordering Information: > ShipsKD> A freight fee of $100 is assessed on orders less than $1000 net. See page 13.

LH

W2

D1

W1

D2

RH

W2

D2

W1

D1

D1 D2 W1 W2 O Part Number Description List Price (US$)

Extended Curved Corner Desk Shells, 36"x 60", RH24 24 36 60 RH DDA223660&#@ Ext.CurvedCornerShell,RH,24”x24”x36”x60” $130424 30 36 60 RH DDA233660&#@ Ext.CurvedCornerShell,RH,24”x30”x36”x60” $133930 24 36 60 RH DDA323660&#@ Ext.CurvedCornerShell,RH,30”x24”x36”x60” $130430 30 36 60 RH DDA333660&#@ Ext.CurvedCornerShell,RH,30”x30”x36”x60” $1339 Extended Curved Corner Desk Shells, 36"x 72", RH 24 24 36 72 RH DDA223672&#@ Ext.CurvedCornerShell,RH,24”x24”x36”x72” $141124 30 36 72 RH DDA233672&#@ Ext.CurvedCornerShell,RH,24”x30”x36”x72” $144130 24 36 72 RH DDA323672&#@ Ext.CurvedCornerShell,RH,30”x24”x36”x72” $141130 30 36 72 RH DDA333672&#@ Ext.CurvedCornerShell,RH,30”x30”x36”x72” $1441 Extended Curved Corner Desk Shells, 48"x 60", RH 24 24 48 60 RH DDA224860&#@ Ext.CurvedCornerShell,RH,24”x24”x48”x60” $145324 30 48 60 RH DDA234860&#@ Ext.CurvedCornerShell,RH,24”x30”x48”x60” $148830 24 48 60 RH DDA324860&#@ Ext.CurvedCornerShell,RH,30”x24”x48”x60” $145330 30 48 60 RH DDA334860&#@ Ext.CurvedCornerShell,RH,30”x30”x48”x60” $1488 Extended Curved Corner Desk Shells, 48"x 72", RH 24 24 48 72 RH DDA224872&#@ Ext.CurvedCornerShell,RH,24”x24”x48”x72” $157924 30 48 72 RH DDA234872&#@ Ext.CurvedCornerShell,RH,24”x30”x48”x72” $161530 24 48 72 RH DDA324872&#@ Ext.CurvedCornerShell,RH,30”x24”x48”x72” $157930 30 48 72 RH DDA334872&#@ Ext.CurvedCornerShell,RH,30”x30”x48”x72” $1615 Extended Curved Corner Desk Shells, 60"x36", LH 24 24 60 36 LH DDA226036&#@ Ext.CurvedCornerShell,LH,24”x24”x60”x36” $130424 30 60 36 LH DDA236036&#@ Ext.CurvedCornerShell,LH,24”x30”x60”x36” $133930 24 60 36 LH DDA326036&#@ Ext.CurvedCornerShell,LH,30”x24”x60”x36” $130430 30 60 36 LH DDA336036&#@ Ext.CurvedCornerShell,LH,30”x30”x60”x36” $1339 Extended Curved Corner Desk Shells, 72"x36", LH 24 24 72 36 LH DDA227236&#@ Ext.CurvedCornerShell,LH,24”x24”x72”x36” $141124 30 72 36 LH DDA237236&#@ Ext.CurvedCornerShell,LH,24”x30”x72”x36” $144130 24 72 36 LH DDA327236&#@ Ext.CurvedCornerShell,LH,30”x24”x72”x36” $141130 30 72 36 LH DDA337236&#@ Ext.CurvedCornerShell,LH,30”x30”x72”x36” $1441 Extended Curved Corner Desk Shells, 60"x48", LH 24 24 60 48 LH DDA226048&#@ Ext.CurvedCornerShell,LH,24”x24”x60”x48” $145324 30 60 48 LH DDA236048&#@ Ext.CurvedCornerShell,LH,24”x30”x60”x48” $148830 24 60 48 LH DDA326048&#@ Ext.CurvedCornerShell,LH,30”x24”x60”x48” $145330 30 60 48 LH DDA336048&#@ Ext.CurvedCornerShell,LH,30”x30”x60”x48” $1488 Extended Curved Corner Desk Shells, 72"x48", LH 24 24 72 48 LH DDA227248&#@ Ext.CurvedCornerShell,LH,24”x24”x72”x48” $157924 30 72 48 LH DDA237248&#@ Ext.CurvedCornerShell,LH,24”x30”x72”x48” $161530 24 72 48 LH DDA327248&#@ Ext.CurvedCornerShell,LH,30”x24”x72”x48” $157930 30 72 48 LH DDA337248&#@ Ext.CurvedCornerShell,LH,30”x30”x72”x48” $1615

Affinity Modular Desk Shells (SIN 711-8)


STEP 1

STEP 2


STEP 3


(^) Leg Finish Suffix List: G StormR BlackS SilverT Medium ToneW ArcticWhiteZ Other


STEP 4 - Jetty Only

255

D1

W1

D2

W2

Curved

D1 D2 W1 W2 O Part Number Description List Price (US$)

Curved Corner Desk Shells24 24 36 36 - DBA223636&#@ CurvedCornerDeskShell,24”x24”x36”x36” $102924 30 36 36 - DBA233636&#@ CurvedCornerDeskShell,24”x30”x36”x36” $102930 24 36 36 - DBA323636&#@ CurvedCornerDeskShell,30”x24”x36”x36” $1029 24 24 42 42 - DBA224242&#@ CurvedCornerDeskShell,24”x24”x42”x42” $112424 30 42 42 - DBA234242&#@ CurvedCornerDeskShell,24”x30”x42”x42” $112430 24 42 42 - DBA324242&#@ CurvedCornerDeskShell,30”x24”x42”x42” $112430 30 42 42 - DBA334242&#@ CurvedCornerDeskShell,30”x30”x42”x42” $1124 24 24 48 48 - DBA224848&#@ CurvedCornerDeskShell,24”x24”x48”x48” $123724 30 48 48 - DBA234848&#@ CurvedCornerDeskShell,24”x30”x48”x48” $123730 24 48 48 - DBA324848&#@ CurvedCornerDeskShell,30”x24”x48”x48” $123730 30 48 48 - DBA334848&#@ CurvedCornerDeskShell,30”x30”x48”x48” $1237

Jetty Conference Shells

24 30 48 72 RH DEA234872&#@^ JettyConferenceShell,RH24”x30”x48”x72” $127930 30 48 72 RH DEA334872&#@^ JettyConferenceShell,RH30”x30”x48”x72” $1352 24 30 72 48 LH DEA327248&#@^ JettyConferenceShell,LH30”x24”x72”x48” $127930 30 72 48 LH DEA337248&#@^ JettyConferenceShell,LH30”x30”x72”x48” $1352

120 Visitor Shell 24 - 24 - - DJB2424&#@ 120VisitorShell,24”x24” $442

Jetty LH(RH opposite)

D2

W2 D1

W1

D1

W1

Visitor

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN711-8)

256

(&) Back Panel Suffix List:F *FullHeightBackPanelT Three-QuarterHeightBackPanelE ShortBackPanel(foroutletaccess)

*D-ToponlyavailablewithFullHeightBackPanel.

STEP 1

STEP 2


STEP 3

(^) Leg Finish Suffix List: G StormR BlackS SilverT Medium ToneW ArcticWhiteZ Other


STEP 4




Ordering Information: > NoGrommet> Includes Support Leg> ShipsKD> ModestyScreenspecifiedseparately.Seepages195-196.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

“D-Top"

W1

D1


“D-Top” with T-Support and Column, 30"30 - 48 - D5D3048#@^ AffinityD-Top,30”x48” $84330 - 60 - D5D3060#@^ AffinityD-Top,30”x60” $89730 - 66 - D5D3066#@^ AffinityD-Top,30”x66” $97230 - 72 - D5D3072#@^ AffinityD-Top,30”x72” $97230 - 84 - D5D3084#@^ AffinityD-Top,30”x84” $108230 - 96 - D5D3096#@^ AffinityD-Top,30”x96” $1082

Tip:Onlyavailablewithafullheightbackpanel(seeStep1).

Affinity Modular Conference Shells (SIN 711-8)

257

“P” RH

D1

W1

“P” LH

D1

W1

Angled RH(LH opposite)

D2

D1

W1


“P” Conference Shells, RH24 - 72 RH DKD2472&#@^ “P”ConferenceShell,RH,24”x72” $98030 - 72 RH DKD3072&#@^ “P”ConferenceShell,RH,30”x72” $1090 “P” Conference Shells, LH 24 - 72 LH DKK2472&#@^ “P”ConferenceShell,LH,24”x72” $98030 - 72 LH DKK3072&#@^ “P”ConferenceShell,LH,30”x72” $1090

Angled Conference Shells, RH 24 36 72 RH DKFR243672&#@^ AngledConferenceShell,RH,24”x36”x72” $107330 42 72 RH DKFR304272&#@^ AngledConferenceShell,RH,30”x42”x72” $1212 Angled Conference Shells, LH 24 36 72 LH DKFL243672&#@^ AngledConferenceShell,LH,24”x36”x72” $107330 42 72 LH DKFL304272&#@^ AngledConferenceShell,LH,30”x42”x72” $1212

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

258


Tip: Three-QuarterHeightandShortBackPanelsareavailableonBridgeShellAonly.

STEP 1

STEP 2


STEP 3




Ordering Information: > Includes Grommet> ShipsKD> Hardware included> Standardgraindirectionrunslefttoright.Tospecifyfronttoback(matching)graindirection

onreturnorbridgeshells,[email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Bridge Shell A works with all conference shells except D-Top. Bridge Shell B spans two full desk shells or a desk shell and a D-Top to make a “U.”

D1 W1

Bridge Shell A

D1 W1

Bridge Shell B


Bridge Shell A, 24"D24 24 DLA2424&#@ RectangularBridgeShellA,24”x24” $65024 30 DLA2430&#@ RectangularBridgeShellA,24”x30” $69524 36 DLA2436&#@ RectangularBridgeShellA,24”x36” $73024 42 DLA2442&#@ RectangularBridgeShellA,24”x42” $79524 48 DLA2448&#@ RectangularBridgeShellA,24”x48” $829

Bridge Shell A, 30"D 30 30 DLA3030&#@ RectangularBridgeShellA,30”x30” $73530 36 DLA3036&#@ RectangularBridgeShellA,30”x36” $76530 42 DLA3042&#@ RectangularBridgeShellA,30”x42” $82930 48 DLA3048&#@ RectangularBridgeShellA,30”x48” $874

Bridge Shell B, 24"D 24 24 DLB2424&#@ RectangularBridgeShellB,24”x24” $38224 30 DLB2430&#@ RectangularBridgeShellB,24”x30” $42424 36 DLB2436&#@ RectangularBridgeShellB,24”x36” $46624 42 DLB2442&#@ RectangularBridgeShellB,24”x42” $52524 48 DLB2448&#@ RectangularBridgeShellB,24”x48” $567 Bridge Shell B, 30"D 30 30 DLB3030&#@ RectangularBridgeShellB,30”x30” $46630 36 DLB3036&#@ RectangularBridgeShellB,30”x36” $49530 42 DLB3042&#@ RectangularBridgeShellB,30”x42” $56230 48 DLB3048&#@ RectangularBridgeShellB,30”x48” $610

Affinity Modular Bridge Shells (SIN 711-8)

259


STEP 1

L Support

D2 D1

T Support

D2

D1

D1 D2 Part Number Description List Price (US$)

L Supports

9 9 LEND9@ LEND9”x9” $2759 24 LEND24@ LEND9”x24” $3799 30 LEND30@ LEND9”x30” $440 T Supports

9 24 TEND24@ TEND9”x24” $3909 30 TEND30@ TEND9”x30” $440

Product Specifications: > Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information: > ShipsKD> Attachmenthardwareincluded> Tie plate included> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Affinity Miscellaneous Supports

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

260

STEP 1


STEP 2


Product Specifications: > 3mmEdge/1mmEdge> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information:> Storage sold separately> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

“U” Reception Shell

D

D

W2 W1

“L” Reception ShellLH Return

(RH Opposite)

W1D1

Rectangle Reception Shell

D1

D1 D2 W1 W2 H Part Number Description List Price (US$)

Rectangle Reception Shells30 30 72 - 42 DRSI3072#@ RectangleReceptionShell,30”x72” $2180

“L” Reception Shells - RH Return24 24 60 60 42 DRSLR6060#@“L”ReceptionShell,RHReturn,60”x60” $265724 24 72 72 42 DRSLR7272#@“L”ReceptionShell,RHReturn,72”x72” $372024 24 84 84 42 DRSLR8484#@“L”ReceptionShell,RHReturn,84”x84” $558924 24 96 96 42 DRSLR9696#@“L”ReceptionShell,RHReturn,96”x96” $6830 “L” Reception Shells - LH Return 24 24 60 60 42 DRSLL6060#@“L”ReceptionShell,LHReturn,60”x60” $265724 24 72 72 42 DRSLL7272#@ “L”ReceptionShell,LHReturn,72”x72” $372024 24 84 84 42 DRSLL8484#@“L”ReceptionShell,LHReturn,84”x84” $558924 24 96 96 42 DRSLL9696#@ “L”ReceptionShell,LHReturn,96”x96” $6830

“U” Reception Shells 24 24 72 $96 42 DRSU7296#@ “U”ReceptionShell,24”x24”x72”x96” $621024 24 96 96 42 DRSU9696#@ “U”ReceptionShell,24”x24”x96”x96” $7450

Affinity Reception Desk Shells (SIN 711-8)

261

Notes

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

262

W1 H1 Part Number Description List Price (US$)

Hutch Assemblies - 66”H installed36 36.5 DHTV36&@# HutchAssembly,2doors,36” $138342 36.5 DHTV42&@# HutchAssembly,2doors,42” $147348 36.5 DHTV48&@# HutchAssembly,4doors,48” $156160 36.5 DHTV60&@# HutchAssembly,4doors,60” $178666 36.5 DHTV66&@# HutchAssembly,4doors,66” $196772 36.5 DHTV72&@# HutchAssembly,4doors,72” $190784 36.5 DHTV84&@# HutchAssembly,4doors,84” $233396 36.5 DHTV96&@# HutchAssembly,6doors,96” $2464 Hutch Assemblies - 78”H installed36 49.1 DHT36&@# HutchAssembly,2doors,36” $190742 49.1 DHT42&@# HutchAssembly,2doors,42” $199848 49.1 DHT48&@# HutchAssembly,4doors,48” $211760 49.1 DHT60&@# HutchAssembly,4doors,60” $221766 49.1 DHT66&@# HutchAssembly,4doors,66” $234772 49.1 DHT72&@# HutchAssembly,4doors,72” $234784 49.1 DHT84&@# HutchAssembly,4doors,84” $314796 49.1 DHT96&@# HutchAssembly,6doors,96” $3279 Cubby Hutch Assemblies - 78”H installed36 49.1 DH236&@# CubbyHutchAssembly,2doors,36” $225142 49.1 DH242&@# CubbyHutchAssembly,2doors,42” $234748 49.1 DH248&@# CubbyHutchAssembly,4doors,48” $234760 49.1 DH260&@# CubbyHutchAssembly,4doors,60” $244766 49.1 DH266&@# CubbyHutchAssembly,4doors,66” $257872 49.1 DH272&@# CubbyHutchAssembly,4doors,72” $2578

Affinity Above Worksurface Storage (SIN 711-8)


STEP 1

STEP 2(#) Door Laminate Suffix List: (Matches Shell Laminate) A StandardDoorFront nochargeB HPLDoorUpgrade +$50

Product Specifications: > Non-locking> 2”Valancetohidelighting> 13”Depth> AdjustableLaminateshelves> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information: > Ships assembled> Nopullsrequired> Wiremanagementforlightsbehindtackboards.> Cablemanagement1.5“Gaponbottomofhutchforcords.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Hutch

W1

H1

Cubby Hutch

W1

H1

263

Tackboard

W1H1

W1 H1 Part Number Description List Price (US$)

Tackboards for 36.5’’H Hutch 34.25 19.8 VTKB36? Tackboard,for36”WHutch $23540.25 19.8 VTKB42? Tackboard,for42”WHutch $31046.25 19.8 VTKB48? Tackboard,for48”WHutch $31058.25 19.8 VTKB60? Tackboard,for60”WHutch $32664.25 19.8 VTKB66? Tackboard,for66”WHutch $38170.25 19.8 VTKB72? Tackboard,for72”WHutch $381 Tackboards for 49.1’’H Hutch34.25 21 DTKB36? Tackboard,for36”WHutch $23540.25 21 DTKB42? Tackboard,for42”WHutch $31046.25 21 DTKB48? Tackboard,for48”WHutch $31058.25 21 DTKB60? Tackboard,for60”WHutch $32664.25 21 DTKB66? Tackboard,for66”WHutch $38170.25 21 DTKB72? Tackboard,for72”WHutch $381 Tackboards for 49.1’’H Cubby Hutch 34.25 18 DTKC36? Tackboard,for36”WCubbyHutch $23540.25 18 DTKC42? Tackboard,for42”WCubbyHutch $31046.25 18 DTKC48? Tackboard,for48”WCubbyHutch $31058.25 18 DTKC60? Tackboard,for60”WCubbyHutch $32664.25 18 DTKC66? Tackboard,for66”WCubbyHutch $38170.25 18 DTKC72? Tackboard,for72”WCubbyHutch $381

STEP 1 - Tackboards Only(?) Fabric Suffix List: Freeformfabricselection.Choosefrom CamiraEra,MillL2,MillChicago,orLuciafabrics.

Tip: To view fabric colors or to order samples gotowww.camirafabrics.com/us.Tip:ForCOMyardage,seepage16.

Affinity Tackboards

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

Ordering Information: > Tackboardsarevelcroinstalledandinclude“V”channelstoroutelightingcables.> Forfullwidthtackboardstousewithwallmountcabinets,seepage243.> ForCOMyardageseepage16.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

264

W1D1

Wall Mount

H1


Wall Mount Overhead Cabinets - 66”H installed13 36 16.8 DH136&@# WallMountCabinet,2doors,36” $132313 42 16.8 DH142&@# WallMountCabinet,2doors,42” $146713 48 16.8 DH148&@# WallMountCabinet,4doors,48” $151713 60 16.8 DH160&@# WallMountCabinet,4doors,60” $165113 66 16.8 DH166&@# WallMountCabinet,4doors,66” $172013 72 16.8 DH172&@# WallMountCabinet,4doors,72” $1839 Tip: Forfullwidthtackboardstousewithwallmountcabinets,seepage213.

Wall Mount Overhead Cabinets - 78” installed 13 36 28 DHW36&@# WallMountCabinet,2doors,36” $154913 42 28 DHW42&@# WallMountCabinet,2doors,42” $176113 48 28 DHW48&@# WallMountCabinet,4doors,48” $191313 60 28 DHW60&@# WallMountCabinet,4doors,60” $197613 66 28 DHW66&@# WallMountCabinet,4doors,66” $207113 72 28 DHW72&@# WallMountCabinet,4doors,72” $2224 Tip: Forfullwidthtackboardstousewithwallmountcabinets,seepage213.

Bookcases for Placement on Credenzas - 30 37 D6A30@ BookcaseforCredenza,30”W,37”H $744- 36 37 D6A36@ BookcaseforCredenza,36”W,37”H $763- 30 49 D6B30@ BookcaseforCredenza,30”W,49”H $832- 36 49 D6B36@ BookcaseforCredenza,36”W,49”H $863

Affinity Above Worksurface Storage

Bookcase (on credenza)

W1D1

(SIN 711-8)


STEP 1

STEP 2 - If Applicable(#) Door Laminate Suffix List: (Matches Shell Laminate)A StandardDoorFront nochargeB HPLDoorUpgrade +$50

Product Specifications: > Non-locking> Nopulls> 2”Valancetohidelighting.> 13”depth> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information:> Ships assembled> WallMountCabinetscomewithmountingcleatsandhardwaretomountcleattocabinet.

Hardwaretomountcleattowallistobesuppliedbydealer.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

265

(*) Storage Pull Suffix List:STEP 1

(B)Bar(A)Arc

STEP 2(@) Casegood (Shell) Laminate Suffix List: A WilsonartKensingtonMaple(10776-60) nochargeD WilsonartPinnacleWalnut(7992-38) nochargeE WilsonartFashionGrey(D381-60) nochargeH WilsonartFieldElm(7999K-12)** nochargeJ WilsonartGreyElm(8201K-12)** nochargeK WilsonartEbonyRecon(7997-38) nochargeM WilsonartFrostyWhite(1573-60) nochargeP WilsonartSlateGrey(D91-60) nochargeQ WilsonartPorticoTeak(8210K-28) nochargeR WilsonartBlack(1595-60) nochargeV WilsonartRiverCherry(7937-38) nochargeW WilsonartDesignerWhite(D354-60) nocharge3 FormicaNeutralTwill(8826-58) nocharge4 FormicaBleachedLegno(8845-58) nocharge7 FormicaSelectCherry(7759-43) nochargeX WilsonartNon-Premiumlaminates(-38, +$264 -60).Ordersof100+unitshavenoupcharge.Y FormicaNon-PremiumStandard(58,43, +$308 MC,SPandNTfinishes)andWilsonart Premium(-07,-12,-18,-28,-52,-78)laminates.Z PioniteNon-Premium,NevamarNon- +$332 Premium,FormicaPremium(WR,42,77, 46,RDFinishes),andFormica459-90Brite Whitewhiteboardlaminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].**Seeproductspecificationsattopofpage.

STEP 3(^) Storage Drawer Front Laminate Suffix List: (Matches Shell Laminate) A StandardDoor/DrawerFront nochargeB HPLDoorUpgrade +$50

W1D1

Lateral

W1D1

Double Door

W1D1

Combo Storage Bookcase

W1D1

W1D1W1D1

Fixed Pedestals Mobile Pedestals


Fixed Pedestals, B/B/F, Laminate20 16 DSA20BBF*@^ Ped,B/B/F,20” $115224 16 DSA24BBF*@^ Ped,B/B/F,24” $1281 Fixed Pedestals, F/F, Laminate 20 16 DSC20FF*@^ Ped,F/F,20” $105324 16 DSC24FF*@^ Ped,F/F,24” $1193 Mobile Pedestals, B/F, Laminate 20 16 DSD20BF*@^ MobilePed,B/F,20” $113424 16 DSD24BF*@^ MobilePed,B/F,24” $1242

Tip:Castersarefieldinstalled. Laterals, 2 High, Laminate 20 30 DSH3028*@^ Lateral,20”x30”x28” $163120 36 DSH3628*@^ Lateral,20”x36”x28” $1674 Double Door Cabinets, 2 High with One Adjustable Shelf, Laminate 20 30 DSJ203028*@^ DoubleDoorCabinet,20”x30”x28” $95220 36 DSJ203628*@^ DoubleDoorCabinet,20”x36”x28” $108424 30 DSJ243028*@^ DoubleDoorCabinet,24”x30”x28” $99124 36 DSJ243628*@^ DoubleDoorCabinet,24”x36”x28 $1180 Combo Storage, B/B/F/Lat, Laminate 20 32 DSZ2032*@^ ComboB/B/F/Lat,20”x32” $189324 32 DSZ2432*@^ ComboB/B/F/Lat,24”x32” $1987 Bookcase, Laminate 13 30 DSL1330@ Bookcase,13”x30” $57613 36 DSL1336@ Bookcase,13”x36” $717

Affinity Below Worksurface Storage

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

Product Specifications: > Heightis27.75”> Locking> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information: > Storageonthispagegoesunderadeskshell.> 24"Dstoragewillnotworkin24"DeskShells.Use20"D.> Use24"Dstoragewith30"Ddeskshells.> 20"Dpedestalsdonotsupportlegalfiling.Use24"D.> Shipsassembled.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

266


Laterals, 2 High with Worksurface20 30 29 DSM203029*@^ Lateral,2-highwithworksurface,20”x30”x29” $179120 36 29 DSM203629*@^ Lateral,2-highwithworksurface,20”x36”x29” $1833

Laterals, 3 High 20 30 41 DSM203041*@^ Lateral,3high,Lam.20”x30”x41” $233720 36 41 DSM203641*@^ Lateral,3high,Lam.20”x36”x41” $2450 Laterals, 4 High 20 30 53 DSM203053*@^ Lateral,4high,Lam.20”x30”x53” $290620 36 53 DSM203653*@^ Lateral,4high,Lam.20”x36”x53” $3362 Double Door Cabinets, 2 High with Worksurface 20 30 29 DSJ203029*@^ DoubleDoorCabinet,2highw/worksurface,20”x30”x29” $109820 36 29 DSJ203629*@^ DoubleDoorCabinet,2highw/worksurface,20”x36”x29” $122720 42 29 DSJ204229*@^ DoubleDoorCabinet,2highw/worksurface,20”x42”x29” $1712 Double Door Cabinets, 3 High 20 30 41 DSJ203041*@^ DoubleDoorCabinet,3high,20”x30”x41” $120920 36 41 DSJ203641*@^ DoubleDoorCabinet,3high,20”x36”x41” $138020 42 41 DSJ204241*@^ DoubleDoorCabinet,3high,20”x42”x41” $1985 Double Door Cabinets, 4 High 20 30 53 DSJ203053*@^ DoubleDoorCabinet,4high,20”x30”x53” $150320 36 53 DSJ203653*@^ DoubleDoorCabinet,4high,20”x36”x53” $162720 42 53 DSJ204253*@^ DoubleDoorCabinet,4high,20”x42”x53” $2223 Double Door Cabinets, 5 High 20 30 66 DSJ203066*@^ DoubleDoorCabinet,5high,20”x30”x66” $176420 36 66 DSJ203666*@^ DoubleDoorCabinet,5high,20”x36”x66” $191720 42 66 DSJ204266*@^ DoubleDoorCabinet,5high,20”x42”x66” $2792 Double Door Cabinets, 6 High 20 30 78 DSJ203078*@^ DoubleDoorCabinet,6high,20”x30”x78” $202720 36 78 DSJ203678*@^ DoubleDoorCabinet,6high,20”x36”x78” $220520 42 78 DSJ204278*@^ DoubleDoorCabinet,6high,20”x42”x78” $3222

W1D1

H1

Laterals Double Door Cabinets

W1D1

H1

Affinity Freestanding Storage (SIN 711-8)


STEP 2

STEP 3(^) Storage Drawer Laminate Suffix List: (Matches Shell Laminate)A StandardDoorFront nochargeB HPLDoorUpgrade +$50


(B)Bar(A)Arc

Product Specifications: > Includes lock> FronttoBackfilebarsincludedwithLaterals.> DoubleDoorCabinetshaveadjustableshelves.> Forbelow-worksurfaceLateralsand2-HighDoubleDoorCabinets,seepage269.> Twostandardlaminates(WilsonartFieldElm7999K-12andGreyElm8201K-12)haveembossedwoodgrains.


Ordering Information: > Ships assembled> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

267

Notes

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

268

Product Specifications: > Includes lock on wardrobe and drawers> Adjustableshelves

Ordering Information: > Ships assembled> MultipleStoragedooraestheticoptionsexisttomatchHutches> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Wardrobe Tower with Storage Door and File-File-Ped (other combinations available)

D1 W1

H1

Left-Hand Shown

D1 W1 H1 O Part Number Description List Price (US$)

Wardrobe Towers with Storage Door, File/File, 24", LH24 24 53 LH DSTA*&@^ WardrobeTower,F/F,LH,24”x24”x53” $275424 24 66 LH DSTB*&@^ WardrobeTower,F/F,LH,24”x24”x66” $299624 24 78 LH DSTC*&@^ WardrobeTower,F/F,LH,24”x24”x78” $3265

Wardrobe Towers with Storage Door, File/File, 24", RH24 24 53 RH DSTK*&@^ WardrobeTower,F/F,RH,24”x24”x53” $275424 24 66 RH DSTL*&@^ WardrobeTower,F/F,RH,24”x24”x66” $299624 24 78 RH DSTM*&@^ WardrobeTower,F/F,RH,24”x24”x78” $3265



STEP 2

STEP 3(^) Storage Drawer Door Laminate Suffix List: (Matches Shell Laminate)A StandardDoor/DrawerFront nochargeB HPLDoorUpgrade +$50


(B)Bar(A)Arc

269


STEP 2

STEP 3(^) Storage Drawer Door Laminate Suffix List: (Matches Shell Laminate) A StandardDoorFront nochargeB HPLDoorUpgrade +$50


(B)Bar(A)Arc

Product Specifications: > Includes lock on wardrobe and drawers> Adjustableshelves

Ordering Information: > Ships assembled> MultipleStoragedooraestheticoptionsexisttomatchHutches> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Wardrobe Tower with Side-Access and File-File-Ped (other combinations available)

D1 W1

H1

Left-Hand Shown


Wardrobe Towers with Side-Access, File/File, 24", LH24 24 53 LH DSTU*@^ WardrobeTower,Side-Access,F/F,LH,24”x24”x53” $262024 24 66 LH DSTV*@^ WardrobeTower,Side-Access,F/F,LH,24”x24”x66” $287124 24 78 LH DSTW*@^ WardrobeTower,Side-Access,F/F,LH,24”x24”x78” $3121

Wardrobe Towers with Side-Access, File/File, 24", RH 24 24 53 RH DST2*@^ WardrobeTower,Side-Access,F/F,RH,24”x24”x53” $262024 24 66 RH DST3*@^ WardrobeTower,Side-Access,F/F,RH,24”x24”x66” $287124 24 78 RH DST4*@^ WardrobeTower,Side-Access,F/F,RH,24”x24”x78” $3121

Affinity Freestanding Storage

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

270


STEP 2

STEP 3(^) Storage Drawer Door Front Laminate Suffix List: (Matches Shell Laminate)A StandardDoorFront nochargeB HPLDoorUpgrade +$50


(B)Bar(A)Arc

Product Specifications: > Includes lock > Adjustableshelves

Ordering Information: > Shipsassembled.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1 W1

Combination Cabinet

H1


Combination Cabinets, 20"D20 30 53 - DSRA*&@^ CombinationCabinet,20”x30”x53” $260220 36 53 - DSRB*&@^ CombinationCabinet,20”x36”x53” $274520 30 66 - DSRC*&@^ CombinationCabinet,20”x30”x66” $286420 36 66 - DSRD*&@^ CombinationCabinet,20”x36”x66” $303320 30 78 - DSRE*&@^ CombinationCabinet,20”x30”x78” $314120 36 78 - DSRF*&@^ CombinationCabinet,20”x36”x78” $3337


271


STEP 1Product Specifications: > Adjustableshelvesonbookcases

Ordering Information: > Shipsassembled.> StabilityRequirements:78”Bookcasemustbeboltedtoawall.> Forbelow-worksurfacestorageseepage239.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1

Bookcases

H1

Open Corner Cabinet

H1


Open Corner Cabinets, 5 High 20 20 66 DSP2066@ OpenCornerCabinet,5high,20”x20”x66” $154324 24 66 DSP2466@ OpenCornerCabinet,5high,24”x24”x66” $182930 30 66 DSP3066@ OpenCornerCabinet,5high,30”x30”x66” $2256 Open Corner Cabinets, 6 High 20 20 78 DSP2078@ OpenCornerCabinet,6high,20”x20”x78” $183824 24 78 DSP2478@ OpenCornerCabinet,6high,24”x24”x78” $218230 30 78 DSP3078@ OpenCornerCabinet,6high,30”x30”x78” $2697

Bookcases, 2 High with Worksurface 13 30 29 DSQ3029@ Bookcase,2highwithworksurface,30”x29” $74913 36 29 DSQ3629@ Bookcase,2highwithworksurface,36”x29” $91213 42 29 DSQ4229@ Bookcase,2highwithworksurface,42”x29” $1209 Bookcases, 3 High 13 30 41 DSQ3041@ Bookcase,3high,30”x41” $69413 36 41 DSQ3641@ Bookcase,3high,36”x41” $83513 42 41 DSQ4241@ Bookcase,3high,42”x41” $1212 Bookcases, 4 High 13 30 53 DSQ3053@ Bookcase,4high,30”x53” $83513 36 53 DSQ3653@ Bookcase,4high,36”x53” $96913 42 53 DSQ4253@ Bookcase,4high,42”x53” $1415 Bookcases, 5 High 13 30 66 DSQ3066@ Bookcase,5high,30”x66” $96913 36 66 DSQ3666@ Bookcase,5high,36”x66” $111113 42 66 DSQ4266@ Bookcase,5high,42”x66” $1627 Bookcases, 6 High 13 30 78 DSQ3078@ Bookcase,6high,30”x78” $112413 36 78 DSQ3678@ Bookcase,6high,36”x78” $126113 42 78 DSQ4278@ Bookcase,6high,42”x78” $1850

Affinity Freestanding Storage

AFF

INIT

Y L

AM

INAT

E FU

RNIT

URE

(SIN 711-8)

273

Benching

274

Ambition™ Overview - Beams

24”H Beam

36”Hw/ Optional12” Topper

24”HBeam

16.1”HLeg

45”Hw/ Optional12” Topper

33”HBeam

25.1”HLeg

Beam Heights

33”H Beam

Beam Applications

For 48”W Workstations



1”Hw/ Optional

Modesty

1”Hw/ Optional

Modesty

72”W

60”W

48”W

275

Ambition™ Overview - Beams

Power and Data

8-Trac - 4 Circuit Separate Neutral, 8 Wires (3+1)


Overview• Includes 2 duplex receptacle openings and one data

cover (2 openings) per user. In single-sided applications, one side of the beam has beltways with no openings.

• Internal power components are included as part of Beam and are preinstalled. (Excluding receptacles and infeeds, which are specified separately.)

• Beams offer lay-in installation of power and data across multiple sections.

• Utilizes the Byrne Phase 3, 5-wire, three 15 amp circuit double-sided power system as standard. Phase 3 contains 3 hot wires, common neutral and common ground.

• Phase 3 is UL 1286 Listed.• In situations requiring dedicated circuits the Byrne 8-Trac

System (4 circuits) is also available.

Series 9000 Specification Guide 405

Wirin

g &

Ca

blin

g

Circuit SpecificationsCircuit SpecificationsDetailed Information for the Electrical Engineer

...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................

All the components inan electrical distribu-tion network must usethe same wiring schematic.The components (powerpoles, base power-ins, pow-erways, and receptacles)snap together and arekeyed to make it impossibleto connect mismatchedparts. Color-coded andlabeled components make iteasy for installers to identifywhich wiring schematiceach component is dedi-cated to.Color coding• 3 circuits shared = Black• 3 circuits separate = White• 4 circuits 3+D = Black• 4 circuit 3I+1 = Tan• 4 circuit 2+2 = Grey

Overview

3 Circuit Shared Neutral, 5 Wires

Hot 1Hot 2Hot 3

Oversized NeutralSystem Ground

Three-circuit electricalcomponents withshared neutrals are stan-dard with 5 wires to providethree circuits that share oneoversized neutral and oneground. This is the traditional3-circuit power alternativethat is specified by addingthe suffix P3 to the panelstyle number.

Three-circuit with sepa-rate neutrals have 8 wiresproviding three circuits, eachwith its own separate neu-tral. The first two circuitsshare an isolated ground;the third uses the systemground.

Four-circuit 3+D are stan-dard with 8 wires to providefour circuits. Three of thesecircuits share an oversizedneutral and a system groundwhile the remaining circuithas its own neutral and iso-lated ground. This is the tra-ditional 4-circuit power, alsoknown as 3+D, that is speci-fied by adding the suffix P4to the panel style number.

Four-circuit, 3I+1 againhave 8 wires but with threecircuits that share an over-sized neutral and isolatedground. The fourth circuithas its own neutral and isattached to the systemground. This electrical sys-tem is like the standard 3+D, but the grounds areswitched, providing threeisolated circuits and onegeneral purpose circuit ascompared to one isolatedcircuit and three general purpose circuits.

Four-circuit 2+2 alsohave 8 wires but provide twocircuits that share an over-sized neutral and a systemground and an additional twocircuits with a second over-sized neutral and an isolatedground.

3 Circuit Separate Neutral, 8 Wires

Hot 1Neutral 1Hot 2Neutral 2Isolated Ground

Hot 3Neutral 3System Ground

4 Circuit 3+D, 8 Wires

Hot 1Hot 2Hot 3Oversized NeutralSystem Ground

Hot 4NeutralIsolated Ground

4 Circuit 3I+1, 8 Wires

Hot 1Hot 2Hot 3Oversized Neutral

Isolated Ground

Hot 4NeutralSystem Ground

4 Circuit 2+2, 8 Wires

Hot 1Hot 2


Hot 3Hot 4

Oversized NeutralIsolated Ground

Wirin

g &

Ca

blin

g

January 2010


Wirin

g &

Ca

blin

g


...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................


Overview


Hot 1Hot 2Hot 3















Isolated Ground



Hot 1Hot 2


Hot 3Hot 4


Wirin

g &

Ca

blin

g

January 2010

Hot 1 (Black)Hot 2 (Red)Hot 3 (Blue)Oversized Neutral 1 (White)System Ground (Green)Hot 4 (Pink)Neutral 2 (Grey)Isolated Ground (Green/Yellow)

Hot 1 (Black) Hot 2 (Red) Neutral 1 (White)Ground 1 (Green)Hot 3 (Blue)Hot 4 (Pink)Neutral 2 (Grey)Ground (Green/Yellow)

Phase 3 - 3 Circuit Shared Neutral, 5 Wires


Wirin

g &

Ca

blin

g


...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................


Overview


Hot 1Hot 2Hot 3















Isolated Ground



Hot 1Hot 2


Hot 3Hot 4


Wirin

g &

Ca

blin

g

January 2010

Hot 1 (Black)Hot 2 (Red)Hot 3 (Blue)Oversized Neutral (White)System Ground (Green or Bare)

New York City PowerNew York City electrical code requires metallic conduit on all modular wiring. All of the modular wiring harnesses for Ambition Beams come standard with metallic conduit (5-wire, 3-circuit). Ambition Base Power Infeeds UPHASE5NY or UPHASE8NY must be used. Modular wiring components must be field installed. To order the Ambition Beams with this option, for circuit choice (#) select “Field Installed” power option.

8 Wire Power with Dedicated CircuitIf an 8-wire power system with a Dedicated Circuit (3+1 or 2+2) is required, select the “4-circuit Powerway” option. Receptacles for the 4-circuit system must be specified separately.

Note: All 8-wire modular wiring comes standard with metallic conduit.

San Francisco Power or Municipalities with Metallic Conduit RequirementsFor San Francisco and any other municipalities whose electrical code requires metallic conduit on all modular wiring, the Ambition Base Power Infeeds must be specified in the metallic option for the 5-wire system. 8-Trac is fully San Francisco compliant. Note: All of the modular wiring harnesses for Ambition Beams come standard with metallic conduit (5-wire, 3-circuit).

Chicago PowerFor Circuit Choice (#), Select "With empty j-boxes for Chicago Power” option.

Power/Data Routing Planning Tips• Base power infeed and data cables are routed from the

floor through the interior of the leg or credenza and into the Beam.

• An optional additional straight leg can be used for extra infeed capacity. This can be field installed in flexible locations along the beam.

• U-channels at Beam seams provide lay-in installation of power and data across multiple sections.

• Beams hold 24 Cat5 cables with the power system in the upper chamber of the beam. An additional Data Cable Basket Kit (specified separately) is required to utilize data below the beam. This holds an additional 28 Cat5 cables.

• Power Poles (10', 12', 15') are available.• Infeed legs hold 12 Cat5 cables.

Ambition Beam Power Data

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

276

Supports for Beams

Low Profile T-, Solano T-, Sawhorse, or Bolt-Down Legs• Low Profile T-, Solano T-, Sawhorse, and Bolt-Down

Legs are available. • Legs are painted steel and available in 5 standard

powdercoat colors. • Legs have a routing hole for power infeed. • A straight (non-structural) infeed leg cable chase

can be ordered and installed along the beam.• Supports beam heights of 24” or 33”.

Credenzas• Recycle Credenza - laminate case. White painted MDF

doors with cutouts, or laminate doors with pulls.• Buffet Credenza - laminate case with six open

compartments. Acoustic bin inserts available (shown right) in three standard colors.

• Provides power infeed routing hidden in back of credenza.

• Supports beam height of 24”.

End Panels• Available in laminate or acoustic material. • Supports beam height of 24”.

Ambition Beam Supports

277

Ambition Planning - Configurations

End Mounting Leg Locations• Beam spans range from 4 to 24 feet on two end supports• With an additional mid-beam support, Beam can span to 36 feet• Offered in easy-to-order kits

Inset Mounting Leg Locations• With inset supports, Beam ends can be cantilevered. Available on Beams up to 36 feet on two supports. • Inset supports must be installed one workstation width from ends of beam (ie. 60” from each end for 60”W workstations). • Offered in easy-to-order kits

4-Pack6-Pack (48”W tops)

6-Pack(60”W & 72”W tops)

8-Pack

10-Pack

12-Pack

2-Pack X X

X X

X X

X X

X X X

X X X

4-Pack n/a

6-Pack n/a

8-Pack

10-Pack

12-Pack

2-Pack n/a

X X

X X

X X

End Panel or Credenza Support on One or Both Ends• Beam spans range from 4 to 12 feet on two supports• With an additional mid-beam support, Beam can span to 36 feet• Individual legs, end panels, and credenzas ordered separately• End Panels and Credenzas add 3-8” of depth to the workstation pack

8-Pack

10-Pack

12-Pack

2-Pack X X

X X

X X

X X

X X X

X X X

X

X

X = Leg/Support Mounting Location

4-Pack6-Pack (48”W tops)

6-Pack(60”W & 72”W tops)

Tip: Beam sections can be up to 144”W. Site conditions must be considered prior to placing order.

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

278

Ambition Planning & Power/Data Access

Planning Around Poles & ObstaclesOccasionally space planning requires special odd-numbered packs. The freestandingnature of Ambition Beams makes planning for obstacles simple and easy.

= Data

= Power = Power

Power/Data Access (8-Pack shown, all other similar)

279

Ambition Planning - Options to Complete your Application

Ambition Planning - Privacy

Beam Topper Screens• 48”, 60”, or 72”W. Actual width is 2” less than

workstation nominal dimension. • 11.3”H above Beam• Styles: Tackable Fabric, Non-Tackable Fabric, Frosted Acrylic, and

Frosted Glass.

2- and 3-sided Acoustic Corner Screens • 48”, 60”, 72”W mitered acoustic material, 1/2” thick with three

optional styles: laser cut organic pattern, laser cut geometric pattern, or solid (no pattern)

• Extends 16”H above worksurface, and 7” below worksurface.• 3-Sided Screens are 12”D. 2-Sided Screens are 20”D.• Additional types of Privacy Screens are available for workstation

privacy.

Modesty Panel Kits • Modesty panels can be specified for below Beam privacy. • Steel construction.

Tip: Modesty panels are available for beams with Low Profile T-Leg, Solano T-Leg, and Bolt-Down.

3-sided Painted Screens• 48”, 60”, 72”W MDF wood core, 3/8” thick with perforated corners• Extends 16”H above worksurface, and 7” below worksurface.• Screens are 12”D. • Corners are radiused 3” and require a similar shaped top (specified

separately)• Additional types of Privacy Screens are available for workstation

privacy.

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

280

Universal Mobile Peds & Apex Metal Storage• Universal Mobile peds, including Skinny (12” mobile

peds) with side drawer pulls are found on page 386.• Universal Apex Steel Mobile Peds, Fixed Peds,

Laterals, Cabinets, etc. are found on pages 234-241. • Cushions available

Planning - Storage

Universal Landscape Storage• 4-types available: Steel Box/Files, Bookcases, and Personal Towers • Include Laminate Tops• 20”H x 18”D• Cushions available• Available on page 292.

Planning - Freestanding Tables

Universal Steel Storage • Box Laterals and Bookcases• 21.5”H x 18”D• Available on page 293.

Leg placement of freestanding tables may vary to accommodate Ambition Beam supports where necessary.

Alternatively, low-profile T-Leg Beam supports can be used, allowing freestanding tables to be positioned on top of the low profile foot with the levelers adjusted accordingly.

Height-Adjustable Options• Solano: Set-Screw, Fast Crank,

Electric VT-Series and VT2 bases

Fixed Height Options • Impression: T-, C-, Straight , O-Legs• Sawhorse• Sensation: T-, C-, Straight, Y-Legs• Solano: T-, C-Legs• Value: T-, C-, Straight Legs

Center Support or inset legs:

End Supports:

Ambition Planning - Options to Complete your Application

281

Ambition Specifying Workstations

Specifying Ambition Workstations

Step 1 – Pick your Beam Size & Power/Data • 2- to 12-Pack workstations, single- or double-sided • Standard 5-Wire 3-Circuit, Optional 8-Wire, or Hardwired • Receptacles and infeeds specified separately.

Step 2 – Choose your Application • Linear workstations • 90-degree workstations

Step 3 – Specify Beam Support Packages • Low Profile T-, Solano T-, Sawhorse, or Bolt-Down Legs, End or Inset Position, and 24” or 33”H available. • Buffet or Recycling Credenza for supporting a Beam height of 24”. • Acoustic or Laminate End Panel for supporting a Beam height of 24”.

Step 4 – Choose Receptacles and Determine Power-Ins • Needed for every workstation pack • All leg supports include a routing hole at the top and bottom. An optional (non-structural) straight leg wire chase is available for additional capacity. • Credenza has hidden infeed routing chase.

Step 5 – Choose Privacy and Modesty Components • 11.3”H beam-mounted Topper Screen • Steel Modesty Panel • Ambition worksurface-mounted 2- or 3-sided Acoustic, or 3-sided Painted Privacy Screens • Additional screen options are available for freestanding tables including Pacman, all-in-one privacy/modesty, and more. See pages 288-290.

Step 6 – Select Freestanding Enwork Tables • Height-Adjustable: Set-Screw, Fast Crank, or Electric • Fixed Height: Sawhorse, T-, C-, Straight, O-, and Y-Legs

Step 7 – Add optional Storage Components • Universal Mobile, Landscape, Steel, and Laminate storage available.

Step 8 – Complete your Application with Enwork Chairs • See pages 377-401 to select the right chair model for your needs.

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

282

Product Specifications:> Beams include two finished ends. > Beams 15’ and longer come in 2 or 3 sections with hidden structural connectors.> A maximum of 24 Cat5 cables (UTP Solid 24AWG/4PRS) fit within a Beam.

The optional Data Cable Basket holds an additional 28. > Ambition Beams are for use with freestanding tables and cannot be used with tethered worksurfaces.

Ordering Information:> Beam sections can be up to 144”W. Site conditions must be considered prior to installation.> Beam receptacles and infeeds are ordered separately.> Beam supports are ordered separately.> For more specific information on power systems in Step 2, see page 300.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(%) Sided Power Suffix List:1 Single-sided Power2 Double-sided Power

STEP 2

Ambition Beams

STEP 3(^) Beam Finish Suffix List:E Clear Anodized Aluminum w/ Silver Beltway no chargeG Storm +$330R Black +$330S Silver +$330T Medium Tone +$330W Arctic White +$330Z Other +$TBD


List Price (US$) CIRCUIT CIRCUIT # CHOICE CHOICE RequiredPart Number Description A, B, E C, D Supports*

Power/Data Beam for use with 48”W Worksurfaces AMB4802#%D^ 4’ Beam, 2-Sided Power, 2-Pack or 1-Sided Power, 1-Pack $1270 $1345 2AMB4804#%D^ 8’ Beam, 2-Sided Power, 4-Pack or 1-Sided Power, 2-Pack $1980 $2120 2 AMB4806#%D^ 12’ Beam, 2-Sided Power, 6-Pack or 1-Sided Power, 3-Pack $2820 $3100 2/3AMB4808#%D^ 16’ Beam, 2-Sided Power, 8-Pack or 1-Sided Power, 4-Pack $4400 $4820 2/3AMB4810#%D^ 20’ Beam, 2-Sided Power, 10-Pack or 1-Sided Power, 5-Pack $5720 $6280 2/3AMB4812#%D^ 24’ Beam, 2-Sided Power, 12-Pack or 1-Sided Power, 6-Pack $6500 $7200 2/3

Tip: Not recommended for 90-degree worksurface applications. Power/Data Beam for use with 60”W Worksurfaces AMB6002#%D^ 5’ Beam, 2-Sided Power, 2-Pack or 1-Sided Power, 1-Pack $1300 $1375 2AMB6004#%D^ 10’ Beam, 2-Sided Power, 4-Pack or 1-Sided Power, 2-Pack $2050 $2190 2 AMB6006#%D^ 15’ Beam, 2-Sided Power, 6-Pack or 1-Sided Power, 3-Pack $3500 $3780 2/3AMB6008#%D^ 20’ Beam, 2-Sided Power, 8-Pack or 1-Sided Power, 4-Pack $4507 $4927 2/3AMB6010#%D^ 25’ Beam, 2-Sided Power, 10-Pack or 1-Sided Power, 5-Pack $5850 $6410 2/3AMB6012#%D^ 30’ Beam, 2-Sided Power, 12-Pack or 1-Sided Power, 6-Pack $6775 $7475 2/3 Power/Data Beam for use with 72”W Worksurfaces AMB7202#%D^ 6’ Beam, 2-Sided Power, 2-Pack or 1-Sided Power, 1-Pack $1335 $1410 2AMB7204#%D^ 12’ Beam, 2-Sided Power, 4-Pack or 1-Sided Power, 2-Pack $2168 $2308 2 AMB7206#%D^ 18’ Beam, 2-Sided Power, 6-Pack or 1-Sided Power, 3-Pack $3612 $3892 2/3AMB7208#%D^ 24’ Beam, 2-Sided Power, 8-Pack or 1-Sided Power, 4-Pack $4640 $5060 2/3AMB7210#%D^ 30’ Beam, 2-Sided Power, 10-Pack or 1-Sided Power, 5-Pack $5990 $6550 2/3AMB7212#%D^ 36’ Beam, 2-Sided Power, 12-Pack or 1-Sided Power, 6-Pack $7005 $7705 2/3

*See page 299 for support locations and quantities.

(#) Circuit Choice Suffix List:A 3-circuit powerway, RECEPTACLES

SPECIFIED SEPARATELY B FIELD INSTALLED 3-circuit powerway, RECEPTACLES

SPECIFIED SEPARATELY C 4-circuit powerway, RECEPTACLES (3+1 or 2+2)

SPECIFIED SEPARATELY D FIELD INSTALLED 4-circuit powerway, for NYC code

RECEPTACLES (3+1 OR 2+2) SPECIFIED SEPARATELY E Used with empty j-boxes for Chicago code

STEP 1 (See pricing in chart below, right)

(SIN 711-2)

283

Ambition Beam Leg Kits (For use when no End Panels or Credenzas are present)

Product Specifications:> Supports on this page are intended for use with Ambition Beams only. > All leg supports include infeed routing hole.

Ordering Information:> If mounting legs inset, a UYCONN infeed splitter must be ordered to support 5-Wire power

(not required for 8-Wire applications). See page 308.> For more information about Beam configurations and leg mounting locations, see page 299. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Part Numbers Description List Price (US$)

Leg Kits for use w/ 2-Pack, 4-Pack, 6-Pack, and 8-Pack for End Mounting Location anduse w/ 8-Pack, 10-Pack, and 12-Pack for Inset Mounting Location, Package of 2AMLL24H2^ Solano T-Leg for 24”H Beam, Infeed Hole, pkg of 2 $555AMLL33H2^ Solano T-Leg for 33”H Beam, Infeed Hole, pkg of 2 $555 AMLR24H2^ Sawhorse Leg for 24”H Beam, Infeed Hole, pkg of 2 $871AMLR33H2^ Sawhorse Leg for 33”H Beam, Infeed Hole, pkg of 2 $871 AMLF24H2^ Low Profile T-Leg for 24”H Beam, Infeed Hole, pkg of 2 $834AMLF33H2^ Low Profile T-Leg for 33”H Beam, Infeed Hole, pkg of 2 $834 AMLS24H2^ Bolt-Down Leg for 24”H Beam, Infeed Hole, pkg of 2 $811AMLS33H2^ Bolt-Down Leg for 33”H Beam, Infeed Hole, pkg of 2 $811 Tip: Leg must be bolted to cement floor. Hardware Provided.

Leg Kits for use w/ 10-Pack, 12-Pack for End Mounting Location, Package of 3 AMLL24H3^ Solano T-Leg for 24”H Beam, Infeed Hole, pkg of 3 $833AMLL33H3^ Solano T-Leg for 33”H Beam, Infeed Hole, pkg of 3 $833 AMLR24H3^ Sawhorse Leg for 24”H Beam, Infeed Hole, pkg of 3 $1306AMLR33H3^ Sawhorse Leg for 33”H Beam, Infeed Hole, pkg of 3 $1306 AMLF24H3^ Low Profile T-Leg for 24”H Beam, Infeed Hole, pkg of 3 $1250AMLF33H3^ Low Profile T-Leg for 33”H Beam, Infeed Hole, pkg of 3 $1250 AMLS24H3^ Bolt-Down Leg for 24”H Beam, Infeed Hole, pkg of 3 $1216AMLS33H3^ Bolt-Down Leg for 33”H Beam, Infeed Hole, pkg of 3 $1216 Tip: Leg must be bolted to cement floor. Hardware Provided.

Optional Additional Straight Leg for use as Wire Chase (non-structural)AMLH24H^ Ambition Straight Leg for 24”H Beam, Infeed Hole $215AMLH33H^ Ambition Straight Leg for 33”H Beam, Infeed Hole $215

Tip: Standard Leg Packages have infeed/data holes. This leg is optional and provides additional cable management capacity. Tip: Straight leg location is flexible and can be installed a number of places along the Beam. Tip: Not intended for use as a structural support.

(^) Paint Suffix ListG Storm no chargeR Black no chargeS Silver no chargeT Medium Tone no chargeW Arctic White no chargeZ Other +$TBD


STEP 1 - Steel Supports

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

284

STEP 1 - Beam Attachment Bracket and Leg supports

Ambition Beam Supports in End Panel and Credenza ApplicationsProduct Specifications:> 2-Packs, 4-Packs, or 48”W workstation 6-Packs require 2 supports

> 6-, 8-, 10-, or 12-Packs require 3 supports

> Center support in 6-, 8-, 10-, 12-Packs must be a steel support. End supports can be credenzas, end panels or steel supports.> Credenzas and end panels available in 24”H beam application only. > Print/Recycle Credenza printer openings are 15.125”H x 14.75”D (+4” if false back - which covers the Ambition

beam connection - is removed).

Ordering Information: > For more information about Beam configurations and leg mounting locations, see page 299. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Laminate End Panels, 29”H (1.25” Thick)AMEL242^# Laminate End Panel for Double-Sided 24”D Tops (actual 51”W) $792AMERR242^# Oversized Laminate End Panel for Double-Sided 24”D Tops (actual 56”W) $792 AMEL302^# Laminate End Panel for Double-Sided 30”D Tops (actual 63”W) $823AMERR302^# Oversized Laminate End Panel for Double-Sided 30”D Tops (actual 68”W) $823

Tip: Available with 24”H Beam only. Tip: If pairing with freestanding height-adjustable tables that have screens extending below the worksurface, choose the oversized end panel.

Acoustic End Panels, 29”H (3” Thick) AMEA242^@ Acoustic End Panel for Double-Sided 24”D Tops (actual 51”W) $2576AMERT242^@ Oversized Acoustic End Panel for Double-Sided 24”D Tops (actual 56”W) $2576 AMEA302^@ Acoustic End Panel for Double-Sided 30”D Tops (actual 63”W) $2849AMERT302^@ Oversized Acoustic End Panel for Double-Sided 30”D Tops (actual 68”W) $2849

Tip: Available with 24”H Beam only. Tip: If pairing with freestanding height-adjustable tables that have screens extending below the worksurface, choose the wider end panel.

Leg Supports for use with End Panels/Credenzas, Package of 1AMLL24H^ Solano T-Leg for 24”H Beam, Infeed Hole $278 AMLR24H^ Sawhorse Leg for 24”H Beam, Infeed Hole $435 AMLF24H^ Low Profile T-Leg for 24”H Beam, Infeed Hole $417 AMLS24H^ Bolt-Down Leg for 24”H Beam, Infeed Hole $405

(@) Acoustic Material Color Suffix ListL Light Grey no chargeM Medium Grey no chargeC Charcoal no chargeZ Other +$TBD

Tip: Additional colors are available at extended lead times for an upcharge. Contact [email protected] for more information.

STEP 2 - Acoustic End Panel

STEP 2 - Laminate End Panel (#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$40 (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard +$55 (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28,




X X

X XX

(^) Paint Suffix ListE Clear Anodized Aluminum no chargeG Storm no chargeR Black no chargeS Silver no chargeT Medium Tone no chargeW Arctic White no chargeZ Other +$TBD

Clear Anodized Aluminum not available on Leg Supports. Tip: Color of beam attachment bracket should match beam color, not end panel color.


*

*

(SIN 711-2)

285

(^) Paint Suffix ListE Clear Anodized Aluminum no chargeG Storm no chargeR Black no chargeS Silver no chargeT Medium Tone no chargeW Arctic White no chargeZ Other +$TBD Tip: Color of beam attachment bracket should match beam color, not credenza color.


(*) Door Finish Suffix ListL Laminate no chargeP Painted White MDF no charge

STEP 1 - Print/Recycle Credenza

(&) Door Pull Suffix List

STEP 4 - Print/Recycle Credenza (if Laminate Door Front)

(B) Bar(A) Arc


Print/Recycle Credenzas with End of Beam Attachments, Laminate, 29”H AMDLB2048*^#& Print Recycle Credenza, 2 Bins/1 Drawer, 21”D x 48”W (actual 51”) $4290 (17.5”W Printer Opening)AMDRR2048*^#& Oversized Print Recycle Credenza, 2 Bins/1 Drawer, 21”D x 48”W (actual 56”) $4290 (22.5”W Printer Opening)AMDLB2060*^#& Print Recycle Credenza, 2 Bins/1 Drawer, 21”D x 60”W (actual 63”) $4971 (29.5”W Printer Opening)AMDRR2060*^#& Oversized Print Recycle Credenza, 2 Bins/1 Drawer, 21”D x 60”W (actual 68”) $4971 (34.5”W Printer Opening) Tip: Acoustic boxes sold separately. Tip: Printer openings are 15.125”H x 14.75”D (+4 if false back - which covers the Ambition beam connection - is removed). Tip: If pairing with freestanding height-adjustable tables that have screens extending below the worksurface, choose the oversized credenza.

Buffet Credenzas with End of Beam Attachments, Laminate, 35”H AMDLA2048^# Buffet Credenza, 6 Openings, 21”D x 48”W (actual 51”) $2796AMDRT2048^# Oversized Buffet Credenza, 6 Openings, 21”D x 48”W (actual 56”) $2796 AMDLA2060^# Buffet Credenza, 6 Openings, 21”D x 60”W (actual 63”) $3121AMDRT2060^# Oversized Buffet Credenza, 6 Openings, 21”D x 60”W (actual 68”) $3121 Tip: Acoustic boxes sold separately. Tip: If pairing with freestanding height-adjustable tables that have screens extending below the worksurface, choose the oversized credenza.

Acoustic Boxes for Credenza Openings AMBOXA1@ Acoustic Box for top openings of AMDLA2048, 18.5”D x 15.5”W x 4”H $330AMBOXA5@ Acoustic Box for top openings of AMDRT2048, 18.5”D x 17”W x 4”H $330 AMBOXA3@ Acoustic Box for top openings of AMDLA2060, 18.5”D x 19.5”W x 4”H $466AMBOXA6@ Acoustic Box for top openings of AMDRT2060, 18.5”D x 21”W x 4”H $466 AMBOXA2@ Acoustic Box for bottom openings of AMDLA2048, 15.5”D x 15.5”W x 18.5”H $590AMBOXA7@ Acoustic Box for bottom openings of AMDRT2048, 15.5”D x 17”W x 18.5”H $590 AMBOXA4@ Acoustic Box for bottom openings of AMDLA2060, 15.5”D x 19.5”W x 18.5”H $593AMBOXA8@ Acoustic Box for bottom openings of AMDRT2060, 15.5”D x 21”W x 18.5”H $593 AMBOXB1@ Acoustic Box for AMDLB2048, 13.5”D x 17”W x 12”H $465AMBOXB3@ Acoustic Box for AMDRR2048, 13.5”D x 22”W x 12”H $465 AMBOXB2@ Acoustic Box for AMDLB2060, 13.5”D x 29”W x 12”H $477AMBOXB4@ Acoustic Box for AMDRR2060, 13.5”D x 34”W x 12”H $477

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium Laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium

(WR, 42, 77, 46, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.


STEP 3

Print/Recycle Credenza

w/ Painted MDF Doors

Print/Recycle Credenza

w/ Laminate Doors

Buffet Credenza (w/ Optional Acoustic Boxes)

(@) Acoustic Material Color Suffix ListL Light Grey no chargeM Medium Grey no chargeC Charcoal no chargeZ Other +$TBD

Tip: Additional colors are available at extended lead times for an upcharge. Contact [email protected] for more information.

STEP 1 - Acoustic Boxes

STEP 2 - Beam Attachment Bracket

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

286

Ambition Beam Receptacles & Electrical Components


5-Wire, 3-Circuit Receptacles - 15 amp AR5151^ Circuit 1 Receptacle, 15 amp $39AR5152^ Circuit 2 Receptacle, 15 amp $39AR5153^ Circuit 3 Receptacle, 15 amp $39

5-Wire Base Power Infeed, 3-Circuit (standard) Powerways, Black UPHASE72 5-Wire Power Infeed, Black, for Hardwire, 72’’ $153UPHASE120 5-Wire Power Infeed, Black, for Hardwire, 120’’ $231UPHASE240 5-Wire Power Infeed, Black, for Hardwire, 240’’ (Power Poles) $380

Tip: If Base Power-In is coming into the middle of a spine wall application then a splitter is required. Tip: Not required in 8-wire applications.

5-Wire Base Power Infeed, 3-Circuit (standard) Powerways, Metallic UPHASE72M 5-Wire Power Infeed, Metallic, for Hardwire, 72’’ $199UPHASE120M 5-Wire Power Infeed, Metallic, for Hardwire, 120’’ $293UPHASE240M 5-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $442 Tip: If Base Power-In is coming into the middle of a spine wall application then a UYCONN Splitter must be ordered (see below).

UYCONN 3-Way Base Power Infeed Splitter for 5-Wire Power System $26

Tip: If Base Power-In is coming into the middle of a Beam application then a splitter is required. Tip: Not required in 8-wire applications.

URBL Blank Cover for unused Power/Data cutouts on Beltway, Grey $21 Tip: For black or white, contact [email protected]

Power Poles, Two Chamber, Clear Anodized Aluminum, 2.3”W x 2.3”D UPHPP10 Power Pole, 10’H $1328UPHPP12 Power Pole, 12’H $1511UPHPP15 Power Pole, 15’H $1764 Tip: Power Pole has a cable routing hole on side of pole at the bottom. Infeed passes through the hole, across the floor, and into hole at the bottom of the infeed leg. Additional hole(s) can be field cut to allow routing directly into the power system. Tip: Includes mounting hardware and ceiling trim plate. Tip: Power infeed not included. Order 240’’ Base Power Infeed separately.

(^) Receptacle Color Suffix List:G GreyR BlackW White

STEP 1 Ordering Information:> For more specific information on power systems, see page 297.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(SIN 711-2)

287

15 amp

20 amp

Ambition Beam 8-Wire Receptacles & Electrical Components


Receptacles for Ambition 8-Wire, 4-Circuit Powerway 15-Amp Receptacles AR815311^ 15-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 1 $37AR815312^ 15-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 2 $37AR815313^ 15-amp Receptacle for 4-circuit (3+1 only) Powerway, Circuit 3 $37AR815223^ 15-amp Receptacle for 4-circuit (2+2 only) Powerway, Circuit 3 (Dedicated) $37AR815314^ 15-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 4 (Dedicated) $37 20-Amp Receptacles AR820311^ 20-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 1 $42AR820312^ 20-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 2 $42AR820313^ 20-amp Receptacle for 4-circuit (3+1 only) Powerway, Circuit 3 $42AR820223^ 20-amp Receptacle for 4-circuit (2+2 only) Powerway, Circuit 3 (Dedicated) $42AR820314^ 20-amp Receptacle for 4-circuit (3+1 or 2+2) Powerway, Circuit 4 (Dedicated) $42

Tip: To add “controlled” stamp for California Title 24, add “C” to the end of the part number and add $2 list.

8-Wire Base Power Infeed, 4-Circuit (optional) Powerways, Metallic UPHASE728W 8-Wire Power Infeed, Metallic, for Hardwire, 72’’ $193UPHASE1208W 8-Wire Power Infeed, Metallic, for Hardwire, 120’’ $256UPHASE2408W 8-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $450

Ordering Information:> For more specific information on power systems, see page 297.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

288

Ambition Cable Management


Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints(e.g. Tiger Dry Lac) must be quoted through [email protected].

Ordering Information: > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


High Capacity Cable Trough for Ambition Beams, Trough 2.75”H x 3”D AMHCP48^ High Capacity Cable Trough for 48” Workstation $88AMHCP60^ High Capacity Cable Trough for 60” Workstation $121AMHCP72^ High Capacity Cable Trough for 72” Workstation $144

Tip: Order one trough per user. Tip: If desk mounted privacy/modesty screens are used, desk must sit 3” away from the beam to clear trough.

Cable Manager for Trough ApplicationsAMCMTRG Wire Manager for Trough Applications, Grey $185AMCMTRR Wire Manager for Trough Applications, Black $185AMCMTRW Wire Manager for Trough Applications, White $185

Tip: Use with High Capacity Cable Trough.

Optional Data Cable Basket Kits for below Frame ApplicationsAMS4802^ Data Cable Basket Kit for AMB4802 $186AMS4804^ Data Cable Basket Kit for AMB4804 $371AMS4806^ Data Cable Basket Kit for AMB4806 $557AMS4808^ Data Cable Basket Kit for AMB4808 $743AMS4810^ Data Cable Basket Kit for AMB4810 $928AMS4812^ Data Cable Basket Kit for AMB4812 $1114 AMS6002^ Data Cable Basket Kit for AMB6002 $206AMS6004^ Data Cable Basket Kit for AMB6004 $413AMS6006^ Data Cable Basket Kit for AMB6006 $619AMS6008^ Data Cable Basket Kit for AMB6008 $825AMS6010^ Data Cable Basket Kit for AMB6010 $1032AMS6012^ Data Cable Basket Kit for AMB6012 $1238 AMS7202^ Data Cable Basket Kit for AMB7202 $227AMS7204^ Data Cable Basket Kit for AMB7204 $454AMS7206^ Data Cable Basket Kit for AMB7206 $681AMS7208^ Data Cable Basket Kit for AMB7208 $908AMS7210^ Data Cable Basket Kit for AMB7210 $1135AMS7212^ Data Cable Basket Kit for AMB7212 $1362

Tip: This basket is optional. The beam holds 24 Cat5 cables. However, this basket provides room for an additional 28 Cat5 cables nestled in the bottom of the beam.

(SIN 711-2)

289

STEP 1(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ OtherTip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

Ambition Modesty Panel Kits


Modesty Panel Kits for 24”H Beams on Steel Legs (no end panels, credenzas), SteelAMMA4802^ Modesty Panel Kit for 24”H AMB4802 $948AMMA4804^ Modesty Panel Kit for 24”H AMB4804 $2328AMMA4806^ Modesty Panel Kit for 24”H AMB4806 $3579AMMA4808^ Modesty Panel Kit for 24”H AMB4808 $4850AMMA4810^ Modesty Panel Kit for 24”H AMB4810 $6121AMMA4812^ Modesty Panel Kit for 24”H AMB4812 $7392 AMMA6002^ Modesty Panel Kit for 24”H AMB6002 $1089AMMA6004^ Modesty Panel Kit for 24”H AMB6004 $2413AMMA6006^ Modesty Panel Kit for 24”H AMB6006 $3737AMMA6008^ Modesty Panel Kit for 24”H AMB6008 $5060AMMA6010^ Modesty Panel Kit for 24”H AMB6010 $6384AMMA6012^ Modesty Panel Kit for 24”H AMB6012 $7708 AMMA7202^ Modesty Panel Kit for 24”H AMB7202 $1153AMMA7204^ Modesty Panel Kit for 24”H AMB7204 $2542AMMA7206^ Modesty Panel Kit for 24”H AMB7206 $3931AMMA7208^ Modesty Panel Kit for 24”H AMB7208 $5319AMMA7210^ Modesty Panel Kit for 24”H AMB7210 $6708AMMA7212^ Modesty Panel Kit for 24”H AMB7212 $8096

Modesty Panel Kits for 33”H Beams on Steel Legs (no end panels, credenzas), SteelAMMB4802^ Modesty Panel Kit for 33”H AMB4802 $1176AMMB4804^ Modesty Panel Kit for 33”H AMB4804 $2610AMMB4806^ Modesty Panel Kit for 33”H AMB4806 $4045AMMB4808^ Modesty Panel Kit for 33”H AMB4808 $5479AMMB4810^ Modesty Panel Kit for 33”H AMB4810 $6913AMMB4812^ Modesty Panel Kit for 33”H AMB4812 $8348 AMMB6002^ Modesty Panel Kit for 33”H AMB6002 $1236AMMB6004^ Modesty Panel Kit for 33”H AMB6004 $2730AMMB6006^ Modesty Panel Kit for 33”H AMB6006 $4225AMMB6008^ Modesty Panel Kit for 33”H AMB6008 $5718AMMB6010^ Modesty Panel Kit for 33”H AMB6010 $7212AMMB6012^ Modesty Panel Kit for 33”H AMB6012 $8707 AMMB7202^ Modesty Panel Kit for 33”H AMB7202 $1236AMMB7204^ Modesty Panel Kit for 33”H AMB7204 $2877AMMB7206^ Modesty Panel Kit for 33”H AMB7206 $4445AMMB7208^ Modesty Panel Kit for 33”H AMB7208 $6014AMMB7210^ Modesty Panel Kit for 33”H AMB7210 $7582AMMB7212^ Modesty Panel Kit for 33”H AMB7212 $9149

Product Specifications:> Modesty panel kits are steel, hang from the beam and are attached/removed with magnets.> Kits include additional straight legs for support, which can also be used for wire management. > Modesty panels are mounted 1”H above the floor. > For a less expensive alternative, slotted modesty panels will fit Ambition Beams. See page 363.

Ordering Information: > Modesty panels are available for beams with Low Profile T-Leg, Solano T-Leg, and Bolt-Down supports only. > For use on beams with end mounted leg applications only. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

290

(?) Fabric Suffix List: Free form fabric selection.

Choose from Camira Era, L2, Chicago, Manhattan, or Lucia fabrics.


STEP 1 - Fabric Screens

Ambition Beam ToppersProduct Specifications: > Acoustic topper screen width is true to worstation size. Non-acoustic topper screens are undersized by 2.25”.

Ordering Information: > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Non-Tackable Fabric Beam Topper ScreensAMTTPN4802? Non-Tackable Fabric Topper Screen Kit for AMB4802 $449AMTTPN4804? Non-Tackable Fabric Topper Screen Kit for AMB4804 $898AMTTPN4806? Non-Tackable Fabric Topper Screen Kit for AMB4806 $1346AMTTPN4808? Non-Tackable Fabric Topper Screen Kit for AMB4808 $1795AMTTPN4810? Non-Tackable Fabric Topper Screen Kit for AMB4810 $2244AMTTPN4812? Non-Tackable Fabric Topper Screen Kit for AMB4812 $2693 AMTTPN6002? Non-Tackable Fabric Topper Screen Kit for AMB6002 $546AMTTPN6004? Non-Tackable Fabric Topper Screen Kit for AMB6004 $1091AMTTPN6006? Non-Tackable Fabric Topper Screen Kit for AMB6006 $1637AMTTPN6008? Non-Tackable Fabric Topper Screen Kit for AMB6008 $2183AMTTPN6010? Non-Tackable Fabric Topper Screen Kit for AMB6010 $2729AMTTPN6012? Non-Tackable Fabric Topper Screen Kit for AMB6012 $3274 AMTTPN7202? Non-Tackable Fabric Topper Screen Kit for AMB7202 $680AMTTPN7204? Non-Tackable Fabric Topper Screen Kit for AMB7204 $1360AMTTPN7206? Non-Tackable Fabric Topper Screen Kit for AMB7206 $2040AMTTPN7208? Non-Tackable Fabric Topper Screen Kit for AMB7208 $2719AMTTPN7210? Non-Tackable Fabric Topper Screen Kit for AMB7210 $3399AMTTPN7212? Non-Tackable Fabric Topper Screen Kit for AMB7212 $4079

Tackable Fabric Beam Topper ScreensAMTTPF4802? Tackable Fabric Topper Screen Kit for AMB4802 $503AMTTPF4804? Tackable Fabric Topper Screen Kit for AMB4804 $1007AMTTPF4806? Tackable Fabric Topper Screen Kit for AMB4806 $1510AMTTPF4808? Tackable Fabric Topper Screen Kit for AMB4808 $2014AMTTPF4810? Tackable Fabric Topper Screen Kit for AMB4810 $2517AMTTPF4812? Tackable Fabric Topper Screen Kit for AMB4812 $3021 AMTTPF6002? Tackable Fabric Topper Screen Kit for AMB6002 $655AMTTPF6004? Tackable Fabric Topper Screen Kit for AMB6004 $1310AMTTPF6006? Tackable Fabric Topper Screen Kit for AMB6006 $1965AMTTPF6008? Tackable Fabric Topper Screen Kit for AMB6008 $2620AMTTPF6010? Tackable Fabric Topper Screen Kit for AMB6010 $3276AMTTPF6012? Tackable Fabric Topper Screen Kit for AMB6012 $3931 AMTTPF7202? Tackable Fabric Topper Screen Kit for AMB7202 $736AMTTPF7204? Tackable Fabric Topper Screen Kit for AMB7204 $1471AMTTPF7206? Tackable Fabric Topper Screen Kit for AMB7206 $2207AMTTPF7208? Tackable Fabric Topper Screen Kit for AMB7208 $2942AMTTPF7210? Tackable Fabric Topper Screen Kit for AMB7210 $3678AMTTPF7212? Tackable Fabric Topper Screen Kit for AMB7212 $4413 Acoustic Topper Screens AMTPA4802& Acoustic Topper Screen Kit for AMB4802 $666AMTPA4804& Acoustic Topper Screen Kit for AMB4804 $1333AMTPA4806& Acoustic Topper Screen Kit for AMB4806 $1999AMTPA4808& Acoustic Topper Screen Kit for AMB4808 $2666AMTPA4810& Acoustic Topper Screen Kit for AMB4810 $3332AMTPA4812& Acoustic Topper Screen Kit for AMB4812 $3999 AMTPA6002& Acoustic Topper Screen Kit for AMB6002 $1087AMTPA6004& Acoustic Topper Screen Kit for AMB6004 $2175AMTPA6006& Acoustic Topper Screen Kit for AMB6006 $3262AMTPA6008& Acoustic Topper Screen Kit for AMB6008 $4349AMTPA6010& Acoustic Topper Screen Kit for AMB6010 $5437AMTPA6012& Acoustic Topper Screen Kit for AMB6012 $6524 Tip: Other sizes available for large projects, contact [email protected].

(&) Acoustic Color Suffix List:L Light Grey no chargeM Medium Grey no chargeC Charcoal no chargeZ Other +$TBD

STEP 1 - Acoustic Screens

(SIN 711-2)

291


Acrylic Beam Topper ScreensAMTTP4802 Acrylic Topper Screen Kit for AMB4802 $178AMTTP4804 Acrylic Topper Screen Kit for AMB4804 $357AMTTP4806 Acrylic Topper Screen Kit for AMB4806 $535AMTTP4808 Acrylic Topper Screen Kit for AMB4808 $714AMTTP4810 Acrylic Topper Screen Kit for AMB4810 $892AMTTP4812 Acrylic Topper Screen Kit for AMB4812 $1071 AMTTP6002 Acrylic Topper Screen Kit for AMB6002 $208AMTTP6004 Acrylic Topper Screen Kit for AMB6004 $416AMTTP6006 Acrylic Topper Screen Kit for AMB6006 $624AMTTP6008 Acrylic Topper Screen Kit for AMB6008 $832AMTTP6010 Acrylic Topper Screen Kit for AMB6010 $1040AMTTP6012 Acrylic Topper Screen Kit for AMB6012 $1247 AMTTP7202 Acrylic Topper Screen Kit for AMB7202 $277AMTTP7204 Acrylic Topper Screen Kit for AMB7204 $554AMTTP7206 Acrylic Topper Screen Kit for AMB7206 $831AMTTP7208 Acrylic Topper Screen Kit for AMB7208 $1107AMTTP7210 Acrylic Topper Screen Kit for AMB7210 $1384AMTTP7212 Acrylic Topper Screen Kit for AMB7212 $1661

Frosted Glass Beam Topper ScreensAMTTPY4802 Frosted Glass Topper Screen Kit for AMB4802 $543AMTTPY4804 Frosted Glass Topper Screen Kit for AMB4804 $1085AMTTPY4806 Frosted Glass Topper Screen Kit for AMB4806 $1628AMTTPY4808 Frosted Glass Topper Screen Kit for AMB4808 $2171AMTTPY4810 Frosted Glass Topper Screen Kit for AMB4810 $2713AMTTPY4812 Frosted Glass Topper Screen Kit for AMB4812 $3256 AMTTPY6002 Frosted Glass Topper Screen Kit for AMB6002 $686AMTTPY6004 Frosted Glass Topper Screen Kit for AMB6004 $1372AMTTPY6006 Frosted Glass Topper Screen Kit for AMB6006 $2058AMTTPY6008 Frosted Glass Topper Screen Kit for AMB6008 $2744AMTTPY6010 Frosted Glass Topper Screen Kit for AMB6010 $3430AMTTPY6012 Frosted Glass Topper Screen Kit for AMB6012 $4116 AMTTPY7202 Frosted Glass Topper Screen Kit for AMB7202 $830AMTTPY7204 Frosted Glass Topper Screen Kit for AMB7204 $1661AMTTPY7206 Frosted Glass Topper Screen Kit for AMB7206 $2491AMTTPY7208 Frosted Glass Topper Screen Kit for AMB7208 $3322AMTTPY7210 Frosted Glass Topper Screen Kit for AMB7210 $4152AMTTPY7212 Frosted Glass Topper Screen Kit for AMB7212 $4983

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

292

Product Specifications:> Acoustic material is 1/2” thick. Tackable, though depending on the size of pin used, the hole may be visible

upon removal. Acoustic privacy screens fit rectangle tops.> 23”H screen is 16” above worksurface and 7” below worksurface. > Painted material is 3/8” thick MDF. Fits tops with matching curved radius (specified separately on next page).> Painted Screen is perforated in curved areas.> Screens are sized for freestanding height-adjustable tables.

Ordering Information:> Acoustic and painted screens are compatible on worksurfaces with standard scallops; they are not compatible

on worksurfaces with a full scallop. > For use with sliding tops, put “S” at the end of the part number. > For additional privacy screen and modesty options, see pages 288-290. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Acoustic 2-Sided Mitered Corner Privacy Screen, 23”H (16”H Above Worksurface)AMA224R@# Acoustic 2-Sided Screen, Right Handed 20”D x 23”W $436AMA230R@# Acoustic 2-Sided Screen, Right Handed 20”D x 29”W $451AMA236R@# Acoustic 2-Sided Screen, Right Handed 20”D x 35”W $639 AMA224L@# Acoustic 2-Sided Screen, Left Handed 20”D x 23”W $436AMA230L@# Acoustic 2-Sided Screen, Left Handed 20”D x 29”W $451AMA236L@# Acoustic 2-Sided Screen, Left Handed 20”D x 35”W $639

Tip: Sized for freestanding height-adjustable tables. Tip: For use with sliding tops, put “S” at the end of the part number.

Acoustic 3-Sided Mitered Corner Privacy Screen, 23”H (16”H Above Worksurface)AMA348J@# Acoustic 3-Sided Screen, 12”D x 48”W $776AMA360J@# Acoustic 3-Sided Screen, 12”D x 60”W $796AMA372J@# Acoustic 3-Sided Screen, 12”D x 72”W $817

Tip: Sized for freestanding height-adjustable tables. Use with worksurface application suffix J. Tip: For use with sliding tops, put “S” at the end of the part number.

Painted 3-Sided Curved Corner Privacy Screen, 23”H (16”H Above Worksurface)AMYP48J^ Painted 3-Sided Curved Privacy Screen, 12”D x 48”W $1025AMYP60J^ Painted 3-Sided Curved Privacy Screen, 12”D x 60”W $1041AMYP72J^ Painted 3-Sided Curved Privacy Screen, 12”D x 72”W $1056

Tip: Must use with tops on pages 315 and 316. Tip: For use with sliding tops, put “S” at the end of the part number.

Ambition Privacy Screens

(#) Acoustic Material Color Suffix List:L Light Grey no chargeM Medium Grey no chargeC Charcoal no chargeZ Other TBD

Tip: Additional colors are available at extended lead times for an upcharge. contact [email protected] for more information.


(@) Pattern Option Suffix List:N No Pattern no charge

G Geometric Pattern (3.5”H) +$147

P Organic Pattern (2.5”H) +$147


Optional organic pattern shown

(^) Paint Option Suffix List:G Storm no chargeR Black no chargeL Light Grey no chargeT Medium Tone no chargeW White no chargeZ Other TBD

Tip: Other paint colors are available for $150 list fee per order. Call/email for availability of specific colors. Custom paints must be quoted through [email protected].

STEP 1 - Painted Screen

Optional geometric pattern shown

Corner perforation detail

(SIN 711-2)

293

STEP 2

Ambition Worksurfaces for 3-Sided Painted Curved Corner Privacy Screens

Product Specifications:> Used with Ambition 3-sided painted curved corner privacy screens. > Back corners are radiused 2.5”.> Actual top depth and width are 1-1/8” and 1-1/2” less than nominal,

respectively (Consistent with application suffix J).

Ordering Information: > For additional worksurface options, see pages 278-279. > A freight fee of $100 net is assessed on orders less than

$1000 net. See page 13.


Rounded Rear Corners Rectangle Worksurfaces, 3mm edge SA2448AJ@# 24”D x 48”W, Laminate, 3mm edge (all sides) $287SA2460AJ@# 24”D x 60”W, Laminate, 3mm edge (all sides) $362SA2472AJ@# 24”D x 72”W, Laminate, 3mm edge (all sides) $411 SA3048AJ@# 30”D x 48”W, Laminate, 3mm edge (all sides) $369SA3060AJ@# 30”D x 60”W, Laminate, 3mm edge (all sides) $427SA3072AJ@# 30”D x 72”W, Laminate, 3mm edge (all sides) $489

Rounded Rear Corners Rectangle Worksurfaces, PVC Edge w/ Ply Look edge SA2448LJ@# 24”D x 48”W, Laminate, PVC Edge with Ply Look (all sides) $329SA2460LJ@# 24”D x 60”W, Laminate, PVC Edge with Ply Look (all sides) $416SA2472LJ@# 24”D x 72”W, Laminate, PVC Edge with Ply Look (all sides) $471 SA3048LJ@# 30”D x 48”W, Laminate, PVC Edge with Ply Look (all sides) $424SA3060LJ@# 30”D x 60”W, Laminate, PVC Edge with Ply Look (all sides) $491SA3072LJ@# 30”D x 72”W, Laminate, PVC Edge with Ply Look (all sides) $562

Rounded Rear Corners Rectangle Worksurfaces, Knife edge (user side only) SA2448KJ@# 24”D x 48”W, Laminate, Knife edge user side, 3mm other sides $372SA2460KJ@# 24”D x 60”W, Laminate, Knife edge user side, 3mm other sides $470SA2472KJ@# 24”D x 72”W, Laminate, Knife edge user side, 3mm other sides $533 SA3048KJ@# 30”D x 48”W, Laminate, Knife edge user side, 3mm other sides $480SA3060KJ@# 30”D x 60”W, Laminate, Knife edge user side, 3mm other sides $555SA3072KJ@# 30”D x 72”W, Laminate, Knife edge user side, 3mm other sides $636

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +15% (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard +20% (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28,

-52, -78) laminates. Z Pionite Non-Premium, Nevamar +25%



(@) Cable Management Suffix List:N No Cable Management no chargeG Grommet (one, center rear) +$19U Power/Data Cut-out (one, center rear) +$37X Other TBD

STEP 1

D

W

BEN

CH

ING

EN

VIR

ON

MEN

TSA

MB

ITIO

N

(SIN 711-2)

294

(^) Base Paint Suffix ListS SilverR BlackW Arctic White

Tip: Other colors available with longer lead times. Contact [email protected] for details.

STEP 1 Product Specifications:> Tops slide forward 5-1/2” for full access to cable trough. Trough is 7”D and 4”H. > Rectangular worksurface with 3mm edge. Optional rear rounded corners are radiused

2.5” to fit Ambition 3-sided curved privacy screens. > Actual top depth and width are 1-1/2” and 1-1/8” less than nominal, respectively (Consistent with application suffix J).> 220 lbs load capacity for 2-legged base. (Load capacity includes weight of worksurface.)> Bosch® electric motor present in each leg. > Adjusts 1.4 inch/second.> Includes programmable handset with 3 preset buttons and Logic Data controller with range limiting capability.> Height adjustment range of 24”- 49.5” high (with top). > Passes ANSI/BIFMA testing. > Plug strip ordered separately.

Ordering Information:> Installation hardware is included.> Ships unassembled.> For additional worksurface options, see pages 278-279. > Silver, black, and arctic white bases typically ship in 48 hours. Additional colors available in 7-8 weeks. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Sliding Tops on VT-Series Electric Bases, Rectangle w/ 3mm Edge, 30”D AMVT48S^# Sliding Top w/ Power Trough and 3mm edge on VT-Series Base, 48”W $3245AMVT60S^# Sliding Top w/ Power Trough and 3mm edge on VT-Series Base, 60”W $3364AMVT72S^# Sliding Top w/ Power Trough and 3mm edge on VT-Series Base, 72”W $3480 Sliding Tops on VT-Series Electric Bases, Rounded Rear Corner Rectangle w/ 3mm Edge, 30”D AMVT48R^# Sliding Top w/ Power Trough, Rounded Rear Corner, and 3mm edge on VT-Series Base, 48”W $3245AMVT60R^# Sliding Top w/ Power Trough, Rounded Rear Corner, and 3mm edge on VT-Series Base, 60”W $3364AMVT72R^# Sliding Top w/ Power Trough, Rounded Rear Corner, and 3mm edge on VT-Series Base, 72”W $3480

Plug Strip with Surge Protection, Flat Rotating Plug CPPSI 6-outlet plug strip, 10-foot power cord, black $118

Ambition Sliding Tops on Solano VT-Series Electric Bases

STEP 2(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$40 (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard +$55 (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18,




Trough Dimensions (end view)

7”

5-1/2”

4”

W

5-1/2”

30”

W

5-1/2”

30”

(SIN 711-2)

(SIN 711-11)

295

BEN

CH

ING

EN

VIR

ON

MEN

TSB

ENC

HIN

G E

NV

IRO

NM

ENTS

AM

BIT

ION

Notes

BENCHING ENVIRONMENT UNIVERSAL PRODUCTSSee pages 278-295 for additional benching products, including:

WorksurfacesStorage

Screens & Modesty Panels

296

Notes

297

BEN

CH

ING

EN

VIR

ON

MEN

TS

Notes

298

32’’H

43.4’’H

Low Beltway

Standard Frame - Workstations

Side View

1.5’’ Leg

Optional Steel Modesty

2.5’’ Frame

.25’’ OptionalTopper

Beltway (Power/Data) Above Worksurface

53.3”OptionalTopper

42’’ Standard

Frame

13.7’’OptionalModesty

Upper Tile

Beltway (Power/Data) Below Worksurface

48.5” OptionalTopper

37.2” StandardFrame


Upper Tile

Grid™ Overview - Frames & Workstations

Rail Profile (original design) Thin Top Profile (no top rail)

Frame Profiles

Frame Sizes

Mini 7.9"H - no tile

Standard 15.9"H - tile

Mega 20.6"H - tall tile

9

9

6

299

24’’H

35.4’’H

Side View

Mini Frame - Workstations

45.25’’OptionalTopper

33.9’’ Mini Frame


40.5’’OptionalTopper

29.1’’ Mini Frame


Mini Frame with Beltway (Power/Data) Above Worksurface

Mini Frame with Beltway (Power/Data) Below Worksurface

Beltway (Power/Data) Above Worksurface Beltway (Power/Data) Below Worksurface

Mega Frame - Workstations

58.1”Optional Topper

46.75’’ Frame

1.5’’ Leg


2.5’’ Frame


53.25” Optional Topper

42”Frame

2.5’’ Frame


1.5’’ Leg


7"

Grid Overview - Workstations

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Low Beltway

20.7”58.1” Optional Topper

46.75” Frame

53.25” Optional Topper

42” Frame

300

Notes

301

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

302

End of Run Frame• One end of Frame is closed and

the opposite end is open for lay-in power/data cable routing and Frame-to-Frame attachment.

• Frame, Receptacles, Jumpers and Beltway are included and ship assembled. Tiles and Legs ship separately.

• Not handed.

Mid Frame• Both ends of Frame are open for

lay-in power/data cable routing and Frame-to-Frame attachment.

• Frame, Receptacles, Jumpers, and Beltway are included and ship assembled. Tiles and Legs ship separately.

Freestanding Frame• Both ends of Frame are closed.• Intended for single Frame

applications or end of Spines (see diagram). No openings exist for Frame-to-Frame attachment on end of Frame.

• Frame, Receptacles, Jumpers and Beltway are included and ship assembled. Tiles and Legs ship separately.

Tip: Spine Wall with no tethering requires T-Legs

Tip: All Frames are clear anodized aluminum

Frame Type by Position

End of Run Frame

Mid Frame

End of Run Frame

Tip: Spine Wall with tethering can use T-Leg or Straight Leg

End of Run Frame

End of Run Frame

End of Run Frame

End of Run Frame

Mid Frame

Freestanding Frame

Mid Frames

Grid Frame Type by Position

303

Frame Functionality

Top Rail Top Slot• Utilized for optional Topper Screen.

Top Rail Side Slot (1 each side) Rail Profile (original design) only• Utilized for work tools.• Utilized for Frame-to-Frame 90 degree connections.• Not included with Thin Profile Frames

Bottom Rail Side Slots (2 each side)• Utilized for optional worksurface tether brackets

(connects worksurfaces to Frames).• Utilized for leg attachment.• Utilized for 90 and 120 degree attachment.• Utilized for optional Cable Tray.

Bottom Rail Bottom Slots (1 each side)• Utilized for modesty panels.

Top Rail Top Slot

Top Rail Side Slot

Bottom Rail Side Slots (2)

Bottom Rail Bottom

Slots

Power and Data



Overview• Power is typically ordered as part of Frame and comes

installed.• Grid frames offer lay-in installation of power and data

across multiple frames.• Utilizes the Byrne Phase 3, 5-wire, three 15 amp circuit

double (or single) sided power system. Phase 3 contains 3 hot wires, common neutral and common ground.

• Phase 3 is UL 1286 Listed.• In situations requiring dedicated circuits the Byrne 8-Trac

System (4 circuits) may be seamlessly substituted for an upcharge.

• Receptacles are part of the Frame Power option for 5-wire. When 8-Trac is specified, receptacles must be specified separately.


Wirin

g &

Ca

blin

g


...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................


Overview


Hot 1Hot 2Hot 3















Isolated Ground



Hot 1Hot 2


Hot 3Hot 4


Wirin

g &

Ca

blin

g

January 2010


Wirin

g &

Ca

blin

g


...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................


Overview


Hot 1Hot 2Hot 3















Isolated Ground



Hot 1Hot 2


Hot 3Hot 4


Wirin

g &

Ca

blin

g

January 2010

Hot 1 (Black)Hot 2 (Red)Hot 3 (Blue)Oversized Neutral 1 (White)System Ground (Green)Hot 4 (Pink)Neutral 2 (Grey)Isolated Ground (Green/Yellow)

Hot 1 (Black) Hot 2 (Red) Neutral 1 (White)Ground 1 (Green)Hot 3 (Blue)Hot 4 (Pink)Neutral 2 (Grey)Ground 2 (Green/Yellow)

Phase 3 - 3 Circuit Shared Neutral, 5 Wires


Wirin

g &

Ca

blin

g


...............................................................................................................................................

...............................................................................................................................................

...............................................................................................................................................


Overview


Hot 1Hot 2Hot 3















Isolated Ground



Hot 1Hot 2


Hot 3Hot 4


Wirin

g &

Ca

blin

g

January 2010

Hot 1 (Black)Hot 2 (Red)Hot 3 (Blue)Oversized Neutral (White)System Ground (Green or Bare)

Grid Frame Functionality & Power Data

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

304

New York City PowerNew York City electrical code requires metallic conduit on all modular wiring. All of the modular wiring harnesses for Grid Frames come standard with metallic conduit (5-wire, 3-circuit). Grid Base Power Infeeds UPHASE5NY or UPHASE8NY must be used. Modular wiring components must be field installed. To order the Grid Frames with this option, for circuit choice (#) select “Field Installed” power option.

8 Wire Power with Dedicated CircuitIf an 8-wire power system with a Dedicated Circuit (3+1 or 2+2) is required, select the “4-circuit Powerway” option. Unlike the standard 5-wiring system, receptacles for the 4-circuit system must be specified separately.

Note: All 8-wire modular wiring comes standard with metallic conduit.Note: Splitter (UYCONN) not needed.

San Francisco Power or Municipalities with Metallic Conduit RequirementsFor San Francisco and any other municipalities whose electrical code requires metallic conduit on all modular wiring, the Grid Base Power Ins must be specified in the metallic option for the 5-wire system. 8-Trac is fully San Francisco compliant. Note: All of the modular wiring harness for Grid Frames come standard with metallic conduit (5-wire, 3-circuit).

Chicago PowerFor Circuit Choice (#), Select "9 - With empty j-boxes for Chicago Power”.

Non-Powered Frames• Includes no power or data.• If Beltways are desired to maintain aesthetic continuity with Powered

Frames they are ordered separately.• Power and Data may be added at a later date.

1-Sided Power Frames• Includes two 15 amp duplex receptacles on ONE side of Frame. Choose

from Circuit 1, 2 or 3 for the ENTIRE Frame.• Includes 1 data cover (with 2 data openings) on ONE side of Frame

(Exception: 30”W frames have no data cover).• Includes a jumper to connect the 2 duplex receptacles within the Frame.• Includes a jumper to connect the Frame to the next Frame in line.

NOTE: this jumper will be discarded in the field if the next Frame is a pass-thru Frame or if this Frame is the last in line.

• Includes 1 Beltway cover (with 3 cutouts). Left and Right cutouts are for duplex receptacles. Middle cutout is for the data plate.

• Non-powered side of panel does not include a beltway.

2-Sided Power Frames• Includes two 15 amp duplex receptacles on EACH side of Frame.

Choose from Circuit 1, 2 or 3 for the ENTIRE Frame.• Includes 1 data cover (with 2 data openings) on EACH side of Frame

(Exception: 30”W frames have no data cover).• Includes a jumper to connect the 2 duplex receptacles in the Frame.• Includes a jumper to connect the Frame to the next Frame in line.

NOTE: this jumper will be discarded in the field if the next Frame is a pass-thru Frame or if this Frame is the last in line.

• Includes 2 Beltway covers (with 3 cutouts each). Left and Right cutouts are for duplex receptacles. Middle cutout is for data plate.

Power/Data Routing Planning Tips• Power/Data is routed from the floor through

the interior of the leg and into the Frame via base in-feeds.

• U-channel on open Frame ends provides lay-in installation of power and data across multiple frames.

• Separate power and data chambers exist within the Frame to keep wires somewhat separated if desired.

• 90 and 120-degree power connections require the purchase of a 90 or 120-degree Power Kit.

• Power Poles (10', 12', 15') are available.• T-Legs and Straight Legs hold 12 CAT6 cables.

Grid Power Data

305

Full Tile Tips> Used where power is not present.> Specified and shipped separately

from Frames. Requires 2 per frame.> Field Assembled> Thin and Rail (original design)

profiles require different tile sizes

Upper Tile Tips> Requires presence of a beltway.> Specified and shipped separately

from Frames. Requires 2 per frame.> Field Assembled.> Thin and Rail (original design)

profiles require different tile sizes

Beltway Tips> Can be specified with Frames

or separately. If specified with Frames comes installed.

> Beltways with cutouts have 3 openings – one for dataplate in center (2 openings) and two for power (2 duplex receptacles on the left and right, inset 12” from sides of frame).

Tile Types

Full Tile Options• Tackable Fabric• Non-tackable Frabric• Acrylic, Frosted• Laminate• Veneer• Whiteboard• Magnetic Whiteboard

Upper Tile Options• Tackable Fabric• Non-tackable Fabric• Acrylic, Frosted• Laminate• Veneer• Whiteboard• Magnetic Whiteboard

Beltway Options• Beltway with power and data

cutouts• Beltway with no power and

data cutouts

Upper Tile Upper Tile

Beltway withPower/Datacut-outs

Beltway with no Power/Datacut-outs

Full Tile

Leg Types for Workstations

Grid Straight Legs - Rectangular or Square• Used in applications where 90 degree connections

and/or tethered worksurface can supply stability.• Legs are ordered separate from Frames.• Legs are clear anodized alum or painted steel.• Rectangular for Grid Frame and worksurface support• Square only for worksurface support

Grid T-Legs• Used in straight line “Spine Wall” applications where

the spine is not attached to the worksurface and there are no 90 degree connections.

• Legs are ordered separate from Frames.• Legs are painted steel (only).• Used where overheads are present if there is no

Double-Sided 90 degree connection.

Grid Tile Types & Workstation Leg Types

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

306

Notes

307

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

308

Frame Connections – Understanding Spine-Based Planning for Workstations

90 Degree Connections• Requires Rail Profile Frames• Connections are off modular and can

be at any location on the Spine.• A 90 Degree Connector package is

specified separately from Frames.• No Junctions (L,T,X) are utilized with Grid.

Connections are always off the spine and thus will affect worksurface specification requirements.

Tip: A 90 degree connection cannot span an in line connection on Rail Profile (original design) Frames

Step 1• Always identify and specify the “Spine”

first. The Spine is the dominant panel run that others are based on.

• Spines consist of 2 end of Run Frames and an unknown number of Mid Frames.

In-Line Connections• The top of the Frames are connected via bolt on the inside top of the Frame.

The bottom of the Frames are connected via shared legs.• In-Line connection hardware is included with every Frame.• No dimensional creep occurs at in-line connections.

120 Degree Connections• Three Frame and Two Frame 120 degree

connections are allowed (Exception: There are no 2-frame connections for Mega Frames).

• 120 connector package is specified separately from Frames.

“Spine” “Spine” “Spine”

Top View

Note: Off modular connection

“Spine”

“Spine”

120 Degree Connector

120 Degree 2-Way Junction

120 Degree Connector

Planning - Grid Workstations

309

Frame Stability for Workstations

Overview• Spine wall applications with no 90 degree connections and no worksurface tethering must utilize T-Legs.• If utilizing T-Legs the panels are stable for indefinite lengths. (See local codes for fire/ADA requirements.)• If utilizing straight legs, no more than 2 Frames may be connected without either a 90 degree Frame connection,

worksurface tether brackets or T-legs for stability.

Tip: Spine wall with no tethering requires T-Legs Tip: Spine Wall with tethering can use T-Legs or Straight Legs

End of Run Frame

Mid Frame

End of Run Frame

End of Run Frame

End of Run Frame

Mid Frame

End of Run Frame

End of Run Frame

Leg Planning for Frames in Workstations

Planning• Legs are ordered separately from Frames.• Always start leg planning with the Spine

first.• A T-, C-, or rectangle leg is required at the

end of each run. Legs at this location are inset from the end of the Frame by 6”.

• A T-, C- or rectangle leg is shared when there is an In-line Frame-to-Frame connection.

• A T-, C- or rectangle leg is required at the start of any 90 degree connection point.

• If there are NO 90 degree connections or worksurface tether applications then “T” legs must be used. This is typically a single Frame or a Spine Wall application.

Top View

Spine

SharedLeg

SharedLeg

Leg

Leg

Leg

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

310

UMTB

Worksurface Planning in Workstations

Freestanding vs. Tether Brackets• Freestanding worksurfaces give optimum

reconfigurability and mobility.• Tether brackets eliminate legs and lower cost.

Tether Bracket Rules• Tether brackets connect the back of the

worksurface to the Frame. The front of the worksurface must be held up by a leg. A tether bracket is NOT THE SAME AS A CANTILEVER.

• As a general rule, two tether brackets are required to hold up the back of a rectangle surface. See diagram T1. Four tether brackets are required on a corner worksurface (two on each side).

• Braces are required on 60”wide and wider rectangle worksurfaces. Spans longer than 72" require additional mid-run floor support such as a leg or storage unit. (Braces are ordered separately.)

• If two worksurfaces are adjoining tether brackets may be shared. In this case surfaces 48’’ and less require one tether bracket plus a shared. Surfaces 54’’+ require two tether brackets plus a shared. See diagram T2 and T3.

• A support plate and brace are required for 90 degree application. See diagram T4 and T5.

T-, C-, Rectangle, and Square Legs Grid Tether Brackets

UMTD

T1 (brace req if 60”wide and wider)

T3 (54’’+ wide, bracerequired on 60”wide+)

T2 (48’’ wide and less)

T4

T5

Worksurface Sizing Tips• For Spine Wall only applications worksurface

dimensions are true. • In 90 degree applications worksurfaces are

designed to be “loose fitting”. The worksurface dimension depends on the number of 90 degree connections and WHERE THEY ARE LOCATED. Remember, Frame thickness is 2.5”.

• Rule: available space for worksurface equals Frame length less 2.5’’ per 90 degree attachment.

Cable Management• Worksurface may be specified with either no

gap, 1/2’’ gap or 1’’ gap to Frame.• Grommets and Full Scallops are recommended

in no gap situations.• Scallops are recommended in 1/2” gap

situations.• Full Scallops or 1” gap recommended for

monitor arms• Grid cable troughs are also available.

Top View(All Frames are 60’’ wide x 2.5’’ thick in this example)

60’’ actualuse 60’’ worksurface



60’’60’’ 60’’

60’’

60’’

60’’

60’’

60’’

86.25’’ actual 86.25’’ actual

“Spine” “Spine” “Spine”60

’’60

’’

Planning - Grid Workstations

311

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

312

Notes

313

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

314

Planning - Privacy

Frame Topper Screen• May be placed into any Frame top slot at any time.• 11.3”H above Frame.• Actual width is 2” less than Frame nominal dimension.• Styles: Frosted Acrylic, Designer Acid-Etched Large

Knots Pattern Frosted Glass, Back Painted Glass Two-sided Markerboards, Acoustic material. 3Form options are available, contact [email protected] for more information.

Modesty Panel• Steel construction.• Attached utilizing the Bottom Rail Bottom Slot.

There are modesty slots on both sides of the Frame. Two modesty’s on each Frame are possible but not necessary (see Grid Dimensional Overviews for more information).

• The modesty slides into Frame on the end and thus is labor intensive to install after furniture is already assembled. Requires disassembly to add-on.

• 12”H.• Actual width is 1” less than Frame nominal dimension.• Legs sit on inside of modesty.

Worktools• Attaches utilizing the slot on the side of the Top Rail on Rail

Profile (original design) Frames.

CPU Holder• Width adjustment 5-1/2" to 9-1/4”, height adjustment is 13.4"

to 20-1/2”• Very small CPUs may not fit.

Cable Managment Options• Numerous vertebrae and cable grippers available.

See page 176.

Planning - Accessories

Planning - Options to Complete your Applications

315

High-Capacity Cable Trough • Trough is 4"H x 2.5"D.

Planning - Storage

Landscape Storage• 4-types available: Steel Box/Files, Bookcases, Personal Cabinets on

levelers or casters, and Personal Towers • Comes with Laminate Tops• 20”H x 18”D• Cushions available• Plinth available for worksurface support• Page 335

Planning - Accessories

Mobile Peds & Apex Metal Storage• Apex Steel Mobile Peds, Fixed Peds, Laterals,

Cabinets, etc. are found on pages 204-211. • eBench Mobile peds, including Skinny (12” mobile

peds) with side drawer pulls are found on page 270.

Affinity Laminate Storage & Mobile Peds• Laminate Mobile Peds, Fixed Peds, Laterals,

Cabinets, etc. are found on pages 239-245.

Grid Steel Storage • Box Laterals and Bookcases• 21.5”H x 18”D• Page 336

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

316

Specifying Grid Workstations

Step 1 – Pick your Frame size and Power • Mini, Standard or Mega Frame • Rail (original) or Thin Profile • 30”, 48”, 60”, 72”, or 84”W • Standard 5 Wire 3 circuit, Optional 8 Wire, or Hard wired

Step 2 – Specify Frame Supports and Connectors • Supports determine power/data access above or below worksurface

Step 3 – Choose Tiles for Frames • Tile size depends on the chosen Frame size, profile, and power/data access. • Fabric, acrylic, laminate, veneer, or whiteboards

Step 4 – Select Worksurfaces • Gaps, scallops, and a full scallop available for power/data access • Rectangular, Corners and Extended Corners, Spanner, …. • Multiple edge options • Worksurface width typically matches Frame width

Step 5 – Specify Worksurface Supports • Rectangular and square straight Legs, O-legs, Tether Brackets, Plinths • Fixed peds and Landscape storage • Worksurface braces required for tops 60"W and wider. Must be ordered separately.

Step 6 – Add Base Power-Ins and Power Infeed Legs • Needed for every workstation pack • Tip: Don’t forget to order a UYCONN splitter if your 5-Wire infeed is not at the end of the typical.

Step 7 – Incorporate Privacy components • Topper Screens, Privacy Screens, Modesty Panels, and End Panels • Numerous attachment and material options including acrylic, whiteboard, magnetic whiteboard, fabric.

Step 8 – Add Cable Management Accessories and Work Tools • Enwork offers fully articulating single Monitor Arms • Cable Troughs, Cable Managers, and CPU holders

Step 9 – Finish with Storage Components • Mobile Peds, Fixed Peds, Laterals, Bookcases, and Towers.

Specifying Grid Workstations

317

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

318

(@) Frame and Top Cap Choice:T Thin Profile R Rail Profile (original design)

STEP 1 Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> End of Run Frame includes one finished end and one end with open “U” channel for lay-in power and cabling.> Mid Frame has an open "U" channel at both ends for lay-in power and cabling. > See page 283 for product details.

Ordering Information:> Frame, Jumpers and Beltway are included and ship assembled.> Legs and Tiles are specified and ship separately.> Order Full Tiles for sides without Beltways. Order Upper Tiles for sides with Beltways. > 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(#) Circuit Choice:1 3-circuit powerway w/ Circuit 1 +$0 grey receptacles2 3-circuit powerway w/ Circuit 2 +$0 grey receptacles3 3-circuit powerway w/ Circuit 3 +$0 grey receptacles4 FIELD INSTALLED 3-circuit +$0 powerway w/ Circuit 1 grey receptacles5 FIELD INSTALLED 3-circuit +$0 powerway w/ Circuit 2 grey receptacles6 FIELD INSTALLED 3-circuit +$0 powerway w/ Circuit 3 grey receptacles7 4-circuit powerway, RECEPTACLES +$150 (3+1 or 2+2) SPECIFIED SEPARATELY8 FIELD INSTALLED 4-circuit powerway, +$150

SPECIFIED SEPARATELY (See page 314). RECEPTACLES (3+1 or 2+2) 9 With empty j-boxes for Chicago Power +$0

Tip: Contact [email protected] if using heavier duty Category 6 cables, which require the 2-sided data openings to be offset from each other via a special beltway.

STEP 2 - If Applicable

D W H Part Number Description List Price (US$)

Standard Frames, End of Run 2.5 30 16 U30E0@0 Standard Frame, End, 30”W, No Power, No Beltway $6452.5 30 16 U30E1@# Standard Frame, End, 30”W, 1 Sided Power with 1 Beltway $9502.5 30 16 U30E2@# Standard Frame, End, 30”W, 2 Sided Power with 2 Beltways $1051 Tip: Data openings are omitted on 30” frames due to space constraints. 2.5 48 16 U48E0@0 Standard Frame, End, 48”W, No Power, No Beltway $6822.5 48 16 U48E1@# Standard Frame, End, 48”W, 1 Sided Power with 1 Beltway $9882.5 48 16 U48E2@# Standard Frame, End, 48”W, 2 Sided Power with 2 Beltways $1088 2.5 60 16 U60E0@0 Standard Frame, End, 60”W, No Power, No Beltway $7592.5 60 16 U60E1@# Standard Frame, End, 60”W, 1 Sided Power with 1 Beltway $11442.5 60 16 U60E2@# Standard Frame, End, 60”W, 2 Sided Power with 2 Beltways $1252 2.5 72 16 U72E0@0 Standard Frame, End, 72”W, No Power, No Beltway $8082.5 72 16 U72E1@# Standard Frame, End, 72”W, 1 Sided Power with 1 Beltway $12132.5 72 16 U72E2@# Standard Frame, End, 72”W, 2 Sided Power with 2 Beltways $1329 2.5 84 16 U84E0@0 Standard Frame, End, 84”W, No Power, No Beltway $9562.5 84 16 U84E1@# Standard Frame, End, 84”W, 1 Sided Power with 1 Beltway $13632.5 84 16 U84E2@# Standard Frame, End, 84”W, 2 Sided Power with 2 Beltways $1476

Grid Standard Frames - End of Run & Mid (SIN 711-1)

319


Standard Frames, Middle of Run2.5 30 16 U30M0@0 Standard Frame, Mid, 30”W, No Power, No Beltway $6192.5 30 16 U30M1@# Standard Frame, Mid, 30”W, 1 Sided Power with 1 Beltway $9242.5 30 16 U30M2@# Standard Frame, Mid, 30”W, 2 Sided Power with 2 Beltways $1024

Tip: Data openings are omitted on 30” frames due to space constraints.

2.5 48 16 U48M0@0 Standard Frame, Mid, 48”W, No Power, No Beltway $6562.5 48 16 U48M1@# Standard Frame, Mid, 48”W, 1 Sided Power with 1 Beltway $9602.5 48 16 U48M2@# Standard Frame, Mid, 48”W, 2 Sided Power with 2 Beltways $1059 2.5 60 16 U60M0@0 Standard Frame, Mid, 60”W, No Power, No Beltway $7312.5 60 16 U60M1@# Standard Frame, Mid, 60”W, 1 Sided Power with 1 Beltway $11162.5 60 16 U60M2@# Standard Frame, Mid, 60”W, 2 Sided Power with 2 Beltways $1227 2.5 72 16 U72M0@0 Standard Frame, Mid, 72”W, No Power, No Beltway $7812.5 72 16 U72M1@# Standard Frame, Mid, 72”W, 1 Sided Power with 1 Beltway $11862.5 72 16 U72M2@# Standard Frame, Mid, 72”W, 2 Sided Power with 2 Beltways $1296 2.5 84 16 U84M0@0 Standard Frame, Mid, 84”W, No Power, No Beltway $9152.5 84 16 U84M1@# Standard Frame, Mid, 84”W, 1 Sided Power with 1 Beltway $13292.5 84 16 U84M2@# Standard Frame, Mid, 84”W, 2 Sided Power with 2 Beltways $1442


Standard Frames, End of Run 2.5 30 16 U30E0@0 Standard Frame, End, 30”W, No Power, No Beltway $6452.5 30 16 U30E1@# Standard Frame, End, 30”W, 1 Sided Power with 1 Beltway $9502.5 30 16 U30E2@# Standard Frame, End, 30”W, 2 Sided Power with 2 Beltways $1051 Tip: Data openings are omitted on 30” frames due to space constraints. 2.5 48 16 U48E0@0 Standard Frame, End, 48”W, No Power, No Beltway $6822.5 48 16 U48E1@# Standard Frame, End, 48”W, 1 Sided Power with 1 Beltway $9882.5 48 16 U48E2@# Standard Frame, End, 48”W, 2 Sided Power with 2 Beltways $1088 2.5 60 16 U60E0@0 Standard Frame, End, 60”W, No Power, No Beltway $7592.5 60 16 U60E1@# Standard Frame, End, 60”W, 1 Sided Power with 1 Beltway $11442.5 60 16 U60E2@# Standard Frame, End, 60”W, 2 Sided Power with 2 Beltways $1252 2.5 72 16 U72E0@0 Standard Frame, End, 72”W, No Power, No Beltway $8082.5 72 16 U72E1@# Standard Frame, End, 72”W, 1 Sided Power with 1 Beltway $12132.5 72 16 U72E2@# Standard Frame, End, 72”W, 2 Sided Power with 2 Beltways $1329 2.5 84 16 U84E0@0 Standard Frame, End, 84”W, No Power, No Beltway $9562.5 84 16 U84E1@# Standard Frame, End, 84”W, 1 Sided Power with 1 Beltway $13632.5 84 16 U84E2@# Standard Frame, End, 84”W, 2 Sided Power with 2 Beltways $1476

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

320

Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> Includes two finished ends.> See page 283 for product details.

Ordering Information: > Frame, Receptacles, Jumpers and Beltway are included and ship assembled.> Legs and Tiles are specified and ship separately.> Order Full Tiles for sides without Beltways. Order Upper Tiles for sides with Beltways. > 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.






Standard Frame, Freestanding2.5 30 16 U30F0@0 Standard Frame, Freestanding, 30”W, No Power, No Beltway $6722.5 30 16 U30F1@# Standard Frame, Freestanding, 30”W, 1 Sided Power, 1 Beltway $9782.5 30 16 U30F2@# Standard Frame, Freestanding, 30”W, 2 Sided Power with 2 Beltways $1076


2.5 48 16 U48F0@0 Standard Frame, Freestanding, 48”W, No Power, No Beltway $7082.5 48 16 U48F1@# Standard Frame, Freestanding, 48”W, 1 Sided Power, 1 Beltway $10142.5 48 16 U48F2@# Standard Frame, Freestanding, 48”W, 2 Sided Power with 2 Beltways $1112 2.5 60 16 U60F0@0 Standard Frame, Freestanding, 60”W, No Power, No Beltway $7852.5 60 16 U60F1@# Standard Frame, Freestanding, 60”W, 1 Sided Power, 1 Beltway $11712.5 60 16 U60F2@# Standard Frame, Freestanding, 60”W, 2 Sided Power with 2 Beltways $1278 2.5 72 16 U72F0@0 Standard Frame, Freestanding, 72”W, No Power, No Beltway $8352.5 72 16 U72F1@# Standard Frame, Freestanding, 72”W, 1 Sided Power, 1 Beltway $12392.5 72 16 U72F2@# Standard Frame, Freestanding, 72”W, 2 Sided Power with 2 Beltways $1301 2.5 84 16 U84F0@0 Standard Frame, Freestanding, 84”W, No Power, No Beltway $9772.5 84 16 U84F1@# Standard Frame, Freestanding, 84”W, 1 Sided Power, 1 Beltway $13822.5 84 16 U84F2@# Standard Frame, Freestanding, 84”W, 2 Sided Power with 2 Beltways $1443

(@) Frame and Top Cap Choice:T Thin Profile R Rail Profile (original design)

STEP 1

Grid Standard Frames - Freestanding (SIN 711-1)

321

NotesD W H Part Number Description List Price (US$)

Standard Frame, Freestanding2.5 30 16 U30F0@0 Standard Frame, Freestanding, 30”W, No Power, No Beltway $6722.5 30 16 U30F1@# Standard Frame, Freestanding, 30”W, 1 Sided Power, 1 Beltway $9782.5 30 16 U30F2@# Standard Frame, Freestanding, 30”W, 2 Sided Power with 2 Beltways $1076


2.5 48 16 U48F0@0 Standard Frame, Freestanding, 48”W, No Power, No Beltway $7082.5 48 16 U48F1@# Standard Frame, Freestanding, 48”W, 1 Sided Power, 1 Beltway $10142.5 48 16 U48F2@# Standard Frame, Freestanding, 48”W, 2 Sided Power with 2 Beltways $1112 2.5 60 16 U60F0@0 Standard Frame, Freestanding, 60”W, No Power, No Beltway $7852.5 60 16 U60F1@# Standard Frame, Freestanding, 60”W, 1 Sided Power, 1 Beltway $11712.5 60 16 U60F2@# Standard Frame, Freestanding, 60”W, 2 Sided Power with 2 Beltways $1278 2.5 72 16 U72F0@0 Standard Frame, Freestanding, 72”W, No Power, No Beltway $8352.5 72 16 U72F1@# Standard Frame, Freestanding, 72”W, 1 Sided Power, 1 Beltway $12392.5 72 16 U72F2@# Standard Frame, Freestanding, 72”W, 2 Sided Power with 2 Beltways $1301 2.5 84 16 U84F0@0 Standard Frame, Freestanding, 84”W, No Power, No Beltway $9772.5 84 16 U84F1@# Standard Frame, Freestanding, 84”W, 1 Sided Power, 1 Beltway $13822.5 84 16 U84F2@# Standard Frame, Freestanding, 84”W, 2 Sided Power with 2 Beltways $1443

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

322

Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> End of Run Frame includes one finished end and one end with open “U” channel for lay-in power and cabling.> Mid Frame has an open "U" channel at both ends for lay-in power and cabling. > Thin Profile not available on Mega Frames.> See page 283 for product details.

Ordering Information:> Frame, Jumpers and Beltway are included and ship assembled.> Legs and Tiles are specified and ship separately.> Order Full Tiles for sides without Beltways. Order Upper Tiles for sides with Beltways. > 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.






Mega Frame, End of Run2.5 30 20.7 U30EB0R0 Mega Frame, End, 30”W, No Power, No Beltway $6682.5 30 20.7 U30EB1R# Mega Frame, End, 30”W, 1 Sided Power, 1 Beltway $9742.5 30 20.7 U30EB2R# Mega Frame, End, 30”W, 2 Sided Power with 2 Beltways $1074


2.5 48 20.7 U48EB0R0 Mega Frame, End, 48”W, No Power, No Beltway $7052.5 48 20.7 U48EB1R# Mega Frame, End, 48”W, 1 Sided Power, 1 Beltway $10092.5 48 20.7 U48EB2R# Mega Frame, End, 48”W, 2 Sided Power with 2 Beltways $1110 2.5 60 20.7 U60EB0R0 Mega Frame, End, 60”W, No Power, No Beltway $7812.5 60 20.7 U60EB1R# Mega Frame, End, 60”W, 1 Sided Power, 1 Beltway $11672.5 60 20.7 U60EB2R# Mega Frame, End, 60”W, 2 Sided Power with 2 Beltways $1275 2.5 72 20.7 U72EB0R0 Mega Frame, End, 72”W, No Power, No Beltway $8302.5 72 20.7 U72EB1R# Mega Frame, End, 72”W, 1 Sided Power, 1 Beltway $12362.5 72 20.7 U72EB2R# Mega Frame, End, 72”W, 2 Sided Power with 2 Beltways $1349 2.5 84 20.7 U84EB0R0 Mega Frame, End, 84”W, No Power, No Beltway $9792.5 84 20.7 U84EB1R# Mega Frame, End, 84”W, 1 Sided Power, 1 Beltway $13842.5 84 20.7 U84EB2R# Mega Frame, End, 84”W, 2 Sided Power with 2 Beltways $1499

Grid Mega Frames - End of Run & Mid (SIN 711-1)

323


Mega Frame, Middle of of Run2.5 30 20.7 U30MB0R0 Mega Frame, Mid, 30”W, No Power, No Beltway $6422.5 30 20.7 U30MB1R# Mega Frame, Mid, 30”W, 1 Sided Power, 1 Beltway $9472.5 30 20.7 U30MB2R# Mega Frame, Mid, 30”W, 2 Sided Power, 2 Beltways $1046


2.5 48 20.7 U48MB0R0 Mega Frame, Mid, 48”W, No Power, No Beltway $6792.5 48 20.7 U48MB1R# Mega Frame, Mid, 48”W, 1 Sided Power, 1 Beltway $9832.5 48 20.7 U48MB2R# Mega Frame, Mid, 48”W, 2 Sided Power, 2 Beltways $1081 2.5 60 20.7 U60MB0R0 Mega Frame, Mid, 60”W, No Power, No Beltway $7552.5 60 20.7 U60MB1R# Mega Frame, Mid, 60”W, 1 Sided Power, 1 Beltway $11402.5 60 20.7 U60MB2R# Mega Frame, Mid, 60”W, 2 Sided Power, 2 Beltways $1249 2.5 72 20.7 U72MB0R0 Mega Frame, Mid, 72”W, No Power, No Beltway $8042.5 72 20.7 U72MB1R# Mega Frame, Mid, 72”W, 1 Sided Power, 1 Beltway $12102.5 72 20.7 U72MB2R# Mega Frame, Mid, 72”W, 2 Sided Power, 2 Beltways $1318 2.5 84 20.7 U84MB0R0 Mega Frame, Mid, 84”W, No Power, No Beltway $9392.5 84 20.7 U84MB1R# Mega Frame, Mid, 84”W, 1 Sided Power, 1 Beltway $13492.5 84 20.7 U84MB2R# Mega Frame, Mid, 84”W, 2 Sided Power, 2 Beltways $1465


Mega Frame, End of Run2.5 30 20.7 U30EB0R0 Mega Frame, End, 30”W, No Power, No Beltway $6682.5 30 20.7 U30EB1R# Mega Frame, End, 30”W, 1 Sided Power, 1 Beltway $9742.5 30 20.7 U30EB2R# Mega Frame, End, 30”W, 2 Sided Power with 2 Beltways $1074


2.5 48 20.7 U48EB0R0 Mega Frame, End, 48”W, No Power, No Beltway $7052.5 48 20.7 U48EB1R# Mega Frame, End, 48”W, 1 Sided Power, 1 Beltway $10092.5 48 20.7 U48EB2R# Mega Frame, End, 48”W, 2 Sided Power with 2 Beltways $1110 2.5 60 20.7 U60EB0R0 Mega Frame, End, 60”W, No Power, No Beltway $7812.5 60 20.7 U60EB1R# Mega Frame, End, 60”W, 1 Sided Power, 1 Beltway $11672.5 60 20.7 U60EB2R# Mega Frame, End, 60”W, 2 Sided Power with 2 Beltways $1275 2.5 72 20.7 U72EB0R0 Mega Frame, End, 72”W, No Power, No Beltway $8302.5 72 20.7 U72EB1R# Mega Frame, End, 72”W, 1 Sided Power, 1 Beltway $12362.5 72 20.7 U72EB2R# Mega Frame, End, 72”W, 2 Sided Power with 2 Beltways $1349 2.5 84 20.7 U84EB0R0 Mega Frame, End, 84”W, No Power, No Beltway $9792.5 84 20.7 U84EB1R# Mega Frame, End, 84”W, 1 Sided Power, 1 Beltway $13842.5 84 20.7 U84EB2R# Mega Frame, End, 84”W, 2 Sided Power with 2 Beltways $1499

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

324

Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> Includes two finished ends.> Thin Profile not available on Mega Frames.> See page 283 for product details.

Ordering Information: > Frame, Receptacles, Jumpers and Beltway are included and ship assembled.> Legs and Tiles are specified and ship separately.> Order Full Tiles for sides without Beltways. Order Upper Tiles for sides with Beltways. > 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.






Mega Frame, Freestanding2.5 30 20.7 U30FB0R0 Mega Frame, Freestanding, 30”W, No Power, No Beltway $6942.5 30 20.7 U30FB1R# Mega Frame, Freestanding, 30”W, 1 Sided Power, 1 Beltway $10012.5 30 20.7 U30FB2R# Mega Frame, Freestanding, 30”W, 2 Sided Power, 2 Beltways $1100


2.5 48 20.7 U48FB0R0 Mega Frame, Freestanding, 48”W, No Power, No Beltway $7302.5 48 20.7 U48FB1R# Mega Frame, Freestanding, 48”W, 1 Sided Power, 1 Beltway $10362.5 48 20.7 U48FB2R# Mega Frame, Freestanding, 48”W, 2 Sided Power, 2 Beltways $1136 2.5 60 20.7 U60FB0R0 Mega Frame, Freestanding, 60”W, No Power, No Beltway $8082.5 60 20.7 U60FB1R# Mega Frame, Freestanding, 60”W, 1 Sided Power, 1 Beltway $11932.5 60 20.7 U60FB2R# Mega Frame, Freestanding, 60”W, 2 Sided Power, 2 Beltways $1302 2.5 72 20.7 U72FB0R0 Mega Frame, Freestanding, 72”W, No Power, No Beltway $8562.5 72 20.7 U72FB1R# Mega Frame, Freestanding, 72”W, 1 Sided Power, 1 Beltway $12632.5 72 20.7 U72FB2R# Mega Frame, Freestanding, 72”W, 2 Sided Power, 2 Beltways $1324 2.5 84 20.7 U84FB0R0 Mega Frame, Freestanding, 84”W, No Power, No Beltway $10002.5 84 20.7 U84FB1R# Mega Frame, Freestanding, 84”W, 1 Sided Power, 1 Beltway $14062.5 84 20.7 U84FB2R# Mega Frame, Freestanding, 84”W, 2 Sided Power, 2 Beltways $1466

Grid Mega Frames - Freestanding (SIN 711-1)

325






Mini Frame, End of Run2.5 30 8 U30EM0T0 Mini Frame, End, 30”W, No Power, 2 Beltways $6212.5 30 8 U30EM1T# Mini Frame, End, 30”W, 1 Sided Power, 2 Beltways $9262.5 30 8 U30EM2T# Mini Frame, End, 30”W, 2 Sided Power, 2 Beltways $1027


2.5 48 8 U48EM0T0 Mini Frame, End, 48”W, No Power, 2 Beltways $6582.5 48 8 U48EM1T# Mini Frame, End, 48”W, 1 Sided Power, 2 Beltways $9642.5 48 8 U48EM2T# Mini Frame, End, 48”W, 2 Sided Power, 2 Beltways $1064 2.5 60 8 U60EM0T0 Mini Frame, End, 60”W, No Power, 2 Beltways $7332.5 60 8 U60EM1T# Mini Frame, End, 60”W, 1 Sided Power, 2 Beltways $11192.5 60 8 U60EM2T# Mini Frame, End, 60”W, 2 Sided Power, 2 Beltways $1229 2.5 72 8 U72EM0T0 Mini Frame, End, 72”W, No Power, 2 Beltways $7842.5 72 8 U72EM1T# Mini Frame, End, 72”W, 1 Sided Power, 2 Beltways $11892.5 72 8 U72EM2T# Mini Frame, End, 72”W, 2 Sided Power, 2 Beltways $1303 2.5 84 8 U84EM0T0 Mini Frame, End, 84”W, No Power, 2 Beltways $9262.5 84 8 U84EM1T# Mini Frame, End, 84”W, 1 Sided Power, 2 Beltways $13332.5 84 8 U84EM2T# Mini Frame, End, 84”W, 2 Sided Power, 2 Beltways $1445

Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> Includes one finished end and one end with open “U” channel for lay-in power and cabling.> A total of 44 Cat5 cables (UTP Solid 24AWG/4PRS) fit within a Mini Frame, 28 above the receptacles and 16 below. > Rail Profile not available on Mini Frames.> See page 283 for product details.

Ordering Information: > Frame, Receptacles, Jumpers and Beltway are included and ship assembled.> Legs are specified and ship separately..> Mini Frames do not allow for tiles.> 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Grid Mini Frames - End of Run

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

326

Product Specifications:> Finish is clear anodized aluminum (exception: Beltway is silver).> Mid Frame has an open "U" channel at both ends for lay-in power and cabling. > Freestanding Frame includes two finished ends. > A total of 44 Cat5 cables (UTP Solid 24AWG/4PRS) fit within a Mini Frame, 28 above the receptacles and 16 below. > Rail Profile not available on Mini Frames.> See page 283 for product details.

Ordering Information:> Frame, Receptacles, Jumpers and Beltway are included and ship assembled.> Legs are specified and ship separately..> Mini Frames do not allow for tiles.> 90 and 120-degree connector kits are on page 309.> Receptacles are included with some power systems and not included with others. See Step 2.> For more specific information on power systems in Step 2 below, see pages 277-278.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.






Mini Frame, Middle of Run2.5 30 8 U30MM0T0 Mini Frame, Mid, 30”W, No Power, 2 Beltways $5952.5 30 8 U30MM1T# Mini Frame, Mid, 30”W, 1 Sided Power, 2 Beltways $9012.5 30 8 U30MM2T# Mini Frame, Mid, 30”W, 2 Sided Power, 2 Beltways $1000


2.5 48 8 U48MM0T0 Mini Frame, Mid, 48”W, No Power, 2 Beltways $6322.5 48 8 U48MM1T# Mini Frame, Mid, 48”W, 1 Sided Power, 2 Beltways $9382.5 48 8 U48MM2T# Mini Frame, Mid, 48”W, 2 Sided Power, 2 Beltways $1035 2.5 60 8 U60MM0T0 Mini Frame, Mid, 60”W, No Power, 2 Beltways $7082.5 60 8 U60MM1T# Mini Frame, Mid, 60”W, 1 Sided Power, 2 Beltways $10942.5 60 8 U60MM2T# Mini Frame, Mid, 60”W, 2 Sided Power, 2 Beltways $1203 2.5 72 8 U72MM0T0 Mini Frame, Mid, 72”W, No Power, 2 Beltways $7582.5 72 8 U72MM1T# Mini Frame, Mid, 72”W, 1 Sided Power, 2 Beltways $11632.5 72 8 U72MM2T# Mini Frame, Mid, 72”W, 2 Sided Power, 2 Beltways $1271 2.5 84 8 U84MM0T0 Mini Frame, Mid, 84”W, No Power, 2 Beltways $9012.5 84 8 U84MM1T# Mini Frame, Mid, 84”W, 1 Sided Power, 2 Beltways $13062.5 84 8 U84MM2T# Mini Frame, Mid, 84”W, 2 Sided Power, 2 Beltways $1414

Grid Mini Frames - Mid & Freestanding (SIN 711-1)

327


Mini Frame, Freestanding2.5 30 8 U30FM0T0 Mini Frame, Freestanding, 30”W, No Power, 2 Beltways $6592.5 30 8 U30FM1T# Mini Frame, Freestanding, 30”W, 1 Sided Power, 2 Beltways $9542.5 30 8 U30FM2T# Mini Frame, Freestanding, 30”W, 2 Sided Power, 2 Beltways $1052


2.5 48 8 U48FM0T0 Mini Frame, Freestanding, 48”W, No Power, 2 Beltways $6832.5 48 8 U48FM1T# Mini Frame, Freestanding, 48”W, 1 Sided Power, 2 Beltways $9902.5 48 8 U48FM2T# Mini Frame, Freestanding, 48”W, 2 Sided Power, 2 Beltways $1089 2.5 60 8 U60FM0T0 Mini Frame, Freestanding, 60”W, No Power, 2 Beltways $7612.5 60 8 U60FM1T# Mini Frame, Freestanding, 60”W, 1 Sided Power, 2 Beltways $11462.5 60 8 U60FM2T# Mini Frame, Freestanding, 60”W, 2 Sided Power, 2 Beltways $1254 2.5 72 8 U72FM0T0 Mini Frame, Freestanding, 72”W, No Power, 2 Beltways $8102.5 72 8 U72FM1T# Mini Frame, Freestanding, 72”W, 1 Sided Power, 2 Beltways $12142.5 72 8 U72FM2T# Mini Frame, Freestanding, 72”W, 2 Sided Power, 2 Beltways $1276 2.5 84 8 U84FM0T0 Mini Frame, Freestanding, 84”W, No Power, 2 Beltways $9522.5 84 8 U84FM1T# Mini Frame, Freestanding, 84”W, 1 Sided Power, 2 Beltways $13592.5 84 8 U84FM2T# Mini Frame, Freestanding, 84”W, 2 Sided Power, 2 Beltways $1418


Mini Frame, Middle of Run2.5 30 8 U30MM0T0 Mini Frame, Mid, 30”W, No Power, 2 Beltways $5952.5 30 8 U30MM1T# Mini Frame, Mid, 30”W, 1 Sided Power, 2 Beltways $9012.5 30 8 U30MM2T# Mini Frame, Mid, 30”W, 2 Sided Power, 2 Beltways $1000


2.5 48 8 U48MM0T0 Mini Frame, Mid, 48”W, No Power, 2 Beltways $6322.5 48 8 U48MM1T# Mini Frame, Mid, 48”W, 1 Sided Power, 2 Beltways $9382.5 48 8 U48MM2T# Mini Frame, Mid, 48”W, 2 Sided Power, 2 Beltways $1035 2.5 60 8 U60MM0T0 Mini Frame, Mid, 60”W, No Power, 2 Beltways $7082.5 60 8 U60MM1T# Mini Frame, Mid, 60”W, 1 Sided Power, 2 Beltways $10942.5 60 8 U60MM2T# Mini Frame, Mid, 60”W, 2 Sided Power, 2 Beltways $1203 2.5 72 8 U72MM0T0 Mini Frame, Mid, 72”W, No Power, 2 Beltways $7582.5 72 8 U72MM1T# Mini Frame, Mid, 72”W, 1 Sided Power, 2 Beltways $11632.5 72 8 U72MM2T# Mini Frame, Mid, 72”W, 2 Sided Power, 2 Beltways $1271 2.5 84 8 U84MM0T0 Mini Frame, Mid, 84”W, No Power, 2 Beltways $9012.5 84 8 U84MM1T# Mini Frame, Mid, 84”W, 1 Sided Power, 2 Beltways $13062.5 84 8 U84MM2T# Mini Frame, Mid, 84”W, 2 Sided Power, 2 Beltways $1414

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

328

STEP 1 - If Applicable Product Specifications:> See page 279 for product details.

Ordering Information: > Each frame requires 2 tiles.> Upper Tiles must be used with a beltway. Full Tiles for Standard Frames are found on pages 304-305. > For COM yardage see page 16.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

(?) Fabric Suffix List:> Free form fabric selection. Choose from

Camira Era, Mill L2, Mill Chicago, or Lucia fabrics.


(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, +15% -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, 43, +20% MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar Non- +25%

Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White

whiteboard laminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].


Tackable Fabric Upper Tiles for Thin Profile Standard Frames - (8"H) USUFT30? Tackable Fabric Upper Tile, Thin Standard, 30”W $238USUFT48? Tackable Fabric Upper Tile, Thin Standard, 48”W $250USUFT60? Tackable Fabric Upper Tile, Thin Standard, 60”W $258USUFT72? Tackable Fabric Upper Tile, Thin Standard, 72”W $319USUFT84? Tackable Fabric Upper Tile, Thin Standard, 84”W $329 Non-tackable Fabric Upper Tiles for Thin Profile Standard Frames - (8"H)USUGT30? Non-tackable Fabric Upper Tile, Thin Standard, 30”W $161USUGT48? Non-tackable Fabric Upper Tile, Thin Standard, 48”W $166USUGT60? Non-tackable Fabric Upper Tile, Thin Standard, 60”W $200USUGT72? Non-tackable Fabric Upper Tile, Thin Standard, 72”W $219USUGT84? Non-tackable Fabric Upper Tile, Thin Standard, 84”W $236 Frosted Acrylic Upper Tiles for Thin Profile Standard Frame - (8"H) USUAT30 Frosted Acrylic Upper Tile, Thin Standard, 30”W $151USUAT48 Frosted Acrylic Upper Tile, Thin Standard, 48”W $162USUAT60 Frosted Acrylic Upper Tile, Thin Standard, 60”W $194USUAT72 Frosted Acrylic Upper Tile, Thin Standard, 72”W $225USUAT84 Frosted Acrylic Upper Tile, Thin Standard, 84”W $257 Laminate Upper Tiles for Thin Profile Standard Frame - (8"H) USULT30# Laminate Upper Tile, Thin Standard, 30”W $81USULT48# Laminate Upper Tile, Thin Standard, 48”W $86USULT60# Laminate Upper Tile, Thin Standard, 60”W $103USULT72# Laminate Upper Tile, Thin Standard, 72”W $120USULT84# Laminate Upper Tile, Thin Standard, 84”W $165 Whiteboard Upper Tiles for Thin Profile Standard Frame - (8"H)USUWT30 Whiteboard Upper Tile, Thin Standard, 30”W $113USUWT48 Whiteboard Upper Tile, Thin Standard, 48”W $121USUWT60 Whiteboard Upper Tile, Thin Standard, 60”W $227USUWT72 Whiteboard Upper Tile, Thin Standard, 72”W $262USUWT84 Whiteboard Upper Tile, Thin Standard, 84”W $313 Tip: Laminate Whiteboard construction. Magnetic Whiteboard Upper Tiles for Thin Profile Standard Frame - (8"H) USUYT30 Magnetic Whiteboard Upper Tile, Thin Standard, 30”W $257USUYT48 Magnetic Whiteboard Upper Tile, Thin Standard, 48”W $277USUYT60 Magnetic Whiteboard Upper Tile, Thin Standard, 60”W $309USUYT72 Magnetic Whiteboard Upper Tile, Thin Standard, 72”W $328USUYT84 Magnetic Whiteboard Upper Tile, Thin Standard, 84”W $373 Tip: Porcelain on steel core.

Grid Upper Tiles for Thin Profile Standard Frames (SIN 711-1)

329


Tackable Fabric Upper Tiles for Rail Profile Standard Frames - (8"H) USUF30? Tackable Fabric Upper Tile, Rail Standard, 30”W $238USUF48? Tackable Fabric Upper Tile, Rail Standard, 48”W $250USUF60? Tackable Fabric Upper Tile, Rail Standard, 60”W $295USUF72? Tackable Fabric Upper Tile, Rail Standard, 72”W $319USUF84? Tackable Fabric Upper Tile, Rail Standard, 84”W $329

Non-tackable Fabric Upper Tiles for Rail Profile Standard Frames - (8"H)USUG30? Non-tackable Fabric Upper Tile, Rail Standard, 30”W $161USUG48? Non-tackable Fabric Upper Tile, Rail Standard, 48”W $166USUG60? Non-tackable Fabric Upper Tile, Rail Standard, 60”W $200USUG72? Non-tackable Fabric Upper Tile, Rail Standard, 72”W $219USUG84? Non-tackable Fabric Upper Tile, Rail Standard, 84”W $236 Frosted Acrylic Upper Tiles for Rail Profile Standard Frame - (8"H) USUA30 Frosted Acrylic Upper Tile, Rail Standard, 30”W $151USUA48 Frosted Acrylic Upper Tile, Rail Standard, 48”W $162USUA60 Frosted Acrylic Upper Tile, Rail Standard, 60”W $194USUA72 Frosted Acrylic Upper Tile, Rail Standard, 72”W $225USUA84 Frosted Acrylic Upper Tile, Rail Standard, 84”W $257 Laminate Upper Tiles for Rail Profile Standard Frame - (8"H) USUL30# Laminate Upper Tile, Rail Standard, 30”W $81USUL48# Laminate Upper Tile, Rail Standard, 48”W $86USUL60# Laminate Upper Tile, Rail Standard, 60”W $103USUL72# Laminate Upper Tile, Rail Standard, 72”W $120USUL84# Laminate Upper Tile, Rail Standard, 84”W $165 Whiteboard Upper Tiles for Rail Profile Standard Frame - (8"H)USUW30 Whiteboard Upper Tile, Rail Standard, 30”W $113USUW48 Whiteboard Upper Tile, Rail Standard, 48”W $121USUW60 Whiteboard Upper Tile, Rail Standard, 60”W $227USUW72 Whiteboard Upper Tile, Rail Standard, 72”W $262USUW84 Whiteboard Upper Tile, Rail Standard, 84”W $313 Tip: Laminate Whiteboard construction. Magnetic Whiteboard Upper Tiles for Rail Profile Standard Frame - (8"H) USUY30 Magnetic Whiteboard Upper Tile, Rail Standard, 30”W $257USUY48 Magnetic Whiteboard Upper Tile, Rail Standard, 48”W $277USUY60 Magnetic Whiteboard Upper Tile, Rail Standard, 60”W $309USUY72 Magnetic Whiteboard Upper Tile, Rail Standard, 72”W $328USUY84 Magnetic Whiteboard Upper Tile, Rail Standard, 84”W $373 Tip: Porcelain on steel core.

Grid Upper Tiles for Rail Profile Standard Frames

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

330

Product Specifications:> See page 279 for product details

Ordering Information: > Each frame requires 2 tiles> Full Tiles are only used in non-powered instances. Upper Tiles for Standard Frames, used with a beltway,

are found on pages 302-303.> For COM yardage see page 16.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Tackable Fabric Full Tiles for Thin Profile Standard Frames - (11"H) USFFT30? Tackable Fabric Full Tile, Thin Standard, 30”W $332USFFT48? Tackable Fabric Full Tile, Thin Standard, 48”W $342USFFT60? Tackable Fabric Full Tile, Thin Standard, 60”W $357USFFT72? Tackable Fabric Full Tile, Thin Standard, 72”W $431USFFT84? Tackable Fabric Full Tile, Thin Standard, 84”W $454 Non-Tackable Fabric Full Tiles for Thin Profile Standard Frames - (11"H)USFGT30? Non-tackable Fabric Full Tile, Thin Standard, 30”W $167USFGT48? Non-tackable Fabric Full Tile, Thin Standard, 48”W $179USFGT60? Non-tackable Fabric Full Tile, Thin Standard, 60”W $206USFGT72? Non-tackable Fabric Full Tile, Thin Standard, 72”W $230USFGT84? Non-tackable Fabric Full Tile, Thin Standard, 84”W $253 Frosted Acrylic Full Tiles for Thin Profile Standard Frames - (11"H) USFAT30 Acrylic Full Tile, Thin Standard, 30"W $153USFAT48 Acrylic Full Tile, Thin Standard, 48"W $163USFAT60 Acrylic Full Tile, Thin Standard, 60"W $196USFAT72 Acrylic Full Tile, Thin Standard, 72"W $228USFAT84 Acrylic Full Tile, Thin Standard, 84"W $260 Laminate Full Tiles for Thin Profile Standard Frames - (11"H) USFLT30# Laminate Full Tile, Thin Standard, 30”W $96USFLT48# Laminate Full Tile, Thin Standard, 48”W $101USFLT60# Laminate Full Tile, Thin Standard, 60”W $120USFLT72# Laminate Full Tile, Thin Standard, 72”W $139USFLT84# Laminate Full Tile, Thin Standard, 84”W $180 Whiteboard Full Tiles for Thin Profile Standard Frames - (11"H) USFWT30 Whiteboard Full Tile, Thin Standard, 30”W $131USFWT48 Whiteboard Full Tile, Thin Standard, 48”W $139USFWT60 Whiteboard Full Tile, Thin Standard, 60”W $243USFWT72 Whiteboard Full Tile, Thin Standard, 72”W $277USFWT84 Whiteboard Full Tile, Thin Standard, 84”W $326 Tip: Laminate Whiteboard construction.

Magnetic Whiteboard Full Tiles for Thin Profile Standard Frames - (11"H) USFYT30 Magnetic Whiteboard Full Tile, Thin Standard, 30”W $291USFYT48 Magnetic Whiteboard Full Tile, Thin Standard, 48”W $316USFYT60 Magnetic Whiteboard Full Tile, Thin Standard, 60”W $339USFYT72 Magnetic Whiteboard Full Tile, Thin Standard, 72”W $382USFYT84 Magnetic Whiteboard Full Tile, Thin Standard, 84”W $440 Tip: Porcelain on steel core.

STEP 1 - If Applicable(?) Fabric Suffix List:> Free form fabric selection. Choose from






Grid Full Tiles for Thin Profile Standard Frames (SIN 711-1)

331


Tackable Fabric Full Tiles for Rail Profile Standard Frames - (11"H) USFF30? Tackable Fabric Full Tile, Rail Standard, 30”W $332USFF48? Tackable Fabric Full Tile, Rail Standard, 48”W $342USFF60? Tackable Fabric Full Tile, Rail Standard, 60”W $357USFF72? Tackable Fabric Full Tile, Rail Standard, 72”W $431USFF84? Tackable Fabric Full Tile, Rail Standard, 84”W $454 Non-Tackable Fabric Full Tiles for Rail Profile Standard Frames - (11"H) USFG30? Non-tackable Fabric Full Tile, Rail Standard, 30”W $167USFG48? Non-tackable Fabric Full Tile, Rail Standard, 48”W $179USFG60? Non-tackable Fabric Full Tile, Rail Standard, 60”W $206USFG72? Non-tackable Fabric Full Tile, Rail Standard, 72”W $230USFG84? Non-tackable Fabric Full Tile, Rail Standard, 84”W $253 Frosted Acrylic Full Tiles for Rail Profile Standard Frames - (11"H) USFA30 Acrylic Full Tile, Rail Standard, 30”W $152USFA48 Acrylic Full Tile, Rail Standard, 48”W $163USFA60 Acrylic Full Tile, Rail Standard, 60”W $195USFA72 Acrylic Full Tile, Rail Standard, 72”W $227USFA84 Acrylic Full Tile, Rail Standard, 84”W $260 Laminate Full Tiles for Rail Profile Standard Frames - (11"H) USFL30# Laminate Full Tile, Rail Standard, 30”W $96USFL48# Laminate Full Tile, Rail Standard, 48”W $101USFL60# Laminate Full Tile, Rail Standard, 60”W $120USFL72# Laminate Full Tile, Rail Standard, 72”W $139USFL84# Laminate Full Tile, Rail Standard, 84”W $180 Whiteboard Full Tiles for Rail Profile Standard Frames - (11"H) USFW30 Whiteboard Full Tile, Rail Standard, 30”W $131USFW48 Whiteboard Full Tile, Rail Standard, 48”W $139USFW60 Whiteboard Full Tile, Rail Standard, 60”W $243USFW72 Whiteboard Full Tile, Rail Standard, 72”W $277USFW84 Whiteboard Full Tile, Rail Standard, 84”W $326 Tip: Laminate Whiteboard construction. Magnetic Whiteboard Full Tiles for Rail Profile Standard Frames - (11"H) USFY30 Magnetic Whiteboard Full Tile, Rail Standard, 30”W $291USFY48 Magnetic Whiteboard Full Tile, Rail Standard, 48”W $316USFY60 Magnetic Whiteboard Full Tile, Rail Standard, 60”W $339USFY72 Magnetic Whiteboard Full Tile, Rail Standard, 72”W $382USFY84 Magnetic Whiteboard Full Tile, Rail Standard, 84”W $440 Tip: Porcelain on steel core.

Grid Full Tiles for Rail Profile Standard Frames

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

332

Product Specifications:> See page 279 for product details

Ordering Information: > Each frame requires 2 tiles> Upper Tiles must be used with a beltway. Full Tiles are only used in non-powered instances.> For COM yardage see page 16.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Tackable Fabric Upper Tiles for Rail Profile Mega Frames - (12"H) USUFB30? Tackable Fabric Upper Tile, Mega, 30”W $257USUFB48? Tackable Fabric Upper Tile, Mega, 48”W $270USUFB60? Tackable Fabric Upper Tile, Mega, 60”W $333USUFB72? Tackable Fabric Upper Tile, Mega, 72”W $360USUFB84? Tackable Fabric Upper Tile, Mega, 84”W $387 Non-Tackable Fabric Upper Tiles for Rail Profile Mega Frames - (12"H) USUGB30? Non-tackable Fabric Upper Tile, Mega, 30”W $172USUGB48? Non-tackable Fabric Upper Tile, Mega, 48”W $180USUGB60? Non-tackable Fabric Upper Tile, Mega, 60”W $238USUGB72? Non-tackable Fabric Upper Tile, Mega, 72”W $244USUGB84? Non-tackable Fabric Upper Tile, Mega, 84”W $267 Frosted Acrylic Upper Tiles for Rail Profile Mega Frames - (12"H) USUAB30 Acrylic Upper Tile, Mega, 30”W $180USUAB48 Acrylic Upper Tile, Mega, 48”W $206USUAB60 Acrylic Upper Tile, Mega, 60”W $252USUAB72 Acrylic Upper Tile, Mega, 72”W $294USUAB84 Acrylic Upper Tile, Mega, 84”W $326 Laminate Upper Tiles for Rail Profile Mega Frames - (12"H) USULB30# Laminate Upper Tile, Mega, 30”W $102USULB48# Laminate Upper Tile, Mega, 48”W $122USULB60# Laminate Upper Tile, Mega, 60”W $147USULB72# Laminate Upper Tile, Mega, 72”W $163USULB84# Laminate Upper Tile, Mega, 84”W $196 Whiteboard Upper Tiles for Rail Profile Mega Frames - (12"H) USUWB30 Whiteboard Upper Tile, Mega, 30”W $134USUWB48 Whiteboard Upper Tile, Mega, 48”W $190USUWB60 Whiteboard Upper Tile, Mega, 60”W $298USUWB72 Whiteboard Upper Tile, Mega, 72”W $346USUWB84 Whiteboard Upper Tile, Mega, 84”W $389 Tip: Laminate Whiteboard Construction. Magnetic Whiteboard Upper Tiles for Rail Profile Mega Frames - (12"H) USUYB30 Magnetic Whiteboard Upper Tile, Mega, 30”W $296USUYB48 Magnetic Whiteboard Upper Tile, Mega, 48”W $347USUYB60 Magnetic Whiteboard Upper Tile, Mega, 60”W $401USUYB72 Magnetic Whiteboard Upper Tile, Mega, 72”W $432USUYB84 Magnetic Whiteboard Upper Tile, Mega, 84”W $471 Tip: Porcelain on steel core.

STEP 1 - If Applicable(?) Fabric Suffix List:> Free form fabric selection. Choose from






Grid Upper & Full Tiles for Rail Profile Mega Frames (SIN 711-1)

333


Tackable Fabric Full Tiles for Rail Profile Mega Frames - (15"H) USFFB30? Tackable Fabric Full Tile, Mega, 30”W $355USFFB48? Tackable Fabric Full Tile, Mega, 48”W $366USFFB60? Tackable Fabric Full Tile, Mega, 60”W $395USFFB72? Tackable Fabric Full Tile, Mega, 72”W $473USFFB84? Tackable Fabric Full Tile, Mega, 84”W $490 Non-Tackable Fabric Full Tiles for Rail Profile Mega Frames - (15"H) USFGB30? Non-tackable Fabric Full Tile, Mega, 30”W $176USFGB48? Non-tackable Fabric Full Tile, Mega, 48”W $190USFGB60? Non-tackable Fabric Full Tile, Mega, 60”W $234USFGB72? Non-tackable Fabric Full Tile, Mega, 72”W $263USFGB84? Non-tackable Fabric Full Tile, Mega, 84”W $282 Frosted Acrylic Full Tiles for Rail Profile Mega Frames - (15"H) USFAB30 Acrylic Full Tile, Mega, 30”W $183USFAB48 Acrylic Full Tile, Mega, 48”W $209USFAB60 Acrylic Full Tile, Mega, 60”W $254USFAB72 Acrylic Full Tile, Mega, 72”W $296USFAB84 Acrylic Full Tile, Mega, 84”W $328 Laminate Full Tiles for Rail Profile Mega Frames - (15"H) USFLB30# Laminate Full Tile, Mega, 30”W $112USFLB48# Laminate Full Tile, Mega, 48”W $143USFLB60# Laminate Full Tile, Mega, 60”W $163USFLB72# Laminate Full Tile, Mega, 72”W $195USFLB84# Laminate Full Tile, Mega, 84”W $222 Whiteboard Full Tiles for Rail Profile Mega Frames - (15"H) USFWB30 Whiteboard Full Tile, Mega, 30”W $169USFWB48 Whiteboard Full Tile, Mega, 48”W $210USFWB60 Whiteboard Full Tile, Mega, 60”W $322USFWB72 Whiteboard Full Tile, Mega, 72”W $374USFWB84 Whiteboard Full Tile, Mega, 84”W $404 Tip: Laminate Whiteboard Construction. Magnetic Whiteboard Full Tiles for Rail Profile Mega Frames - (15"H) USFYB30 Magnetic Whiteboard Full Tile, Mega, 30”W $301USFYB48 Magnetic Whiteboard Full Tile, Mega, 48”W $360USFYB60 Magnetic Whiteboard Full Tile, Mega, 60”W $403USFYB72 Magnetic Whiteboard Full Tile, Mega, 72”W $449USFYB84 Magnetic Whiteboard Full Tile, Mega, 84”W $487 Tip: Porcelain on steel core.

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

334

STEP 1 - Steel Legs Only(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other


Ordering Information:> Frame Support aluminum legs have two passageways 5/8" x 1-5/16" per leg. For steel legs there is a single

passageway 1-5/16" x 2-3/4". > Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


T-Leg Frame Supports, Painted SteelUTLEG36^ Impression Foot Steel T-Leg for Beltway Below Worksurface $243UTLEG42^ Impression Foot Steel T-Leg for Beltway Above Worksurface $266

UCATLEG36^ Solano Foot Steel T-Leg for Beltway Below Worksurface $243UCATLEG42^ Solano Foot Steel T-Leg for Beltway Above Worksurface $266

T-Leg Frame Supports with Power Infeed Hole, Painted Steel UTLEG36H^ Impression Foot Steel T-Leg, Infeed Hole, for Beltway Below Worksurface $248UTLEG42H^ Impression Foot Steel T-leg, Infeed Hole, for Beltway Above Worksurface $272

UCATLEG36H^ Solano Foot Steel T-Leg, Infeed Hole, for Beltway Below Worksurface $248UCATLEG42H^ Solano Foot Steel T-Leg, Infeed Hole, for Beltway Above Worksurface $272

Straight Leg Frame Supports USLEGAL36 Aluminum Straight Leg for Beltway Below Worksurface $201USLEGAL42 Aluminum Straight Leg for Beltway Above Worksurface $216USLEG36^ Steel Straight Leg for Beltway Below Worksurface $238USLEG42^ Steel Straight Leg for Beltway Above Worksurface $252

Straight Leg Frame Supports with Power Infeed Hole USLEGAL36H Aluminum Straight Leg, Infeed Hole, for Beltway Below Worksurface $210USLEGAL42H Aluminum Straight Leg, Infeed Hole, for Beltway Above Worksurface $223USLEG36H^ Steel Straight Leg, Infeed Hole, for Belway Below Worksurface $244USLEG42H^ Steel Straight Leg, Infeed Hole, for Belway Above Worksurface $258

Tip: Infeed hole is 1” x 3”. UHC^ Grid Leg Infeed Hole Cover $45

Grid Frame Supports & Connectors for Workstations (SIN 711-1)

335


90 Degree Connector Packages - Rail Profile UC90 90 Degree Connector Package, for Rail Profile Frame, No Power $36

UPP90 90 Degree Connector Package, for Rail Profile Frame, with 3-circuit Power $203 Tip: Includes Brackets, Splitter and Jumper for one 90 degree Frame connection off a Spine Wall When doing an X junction with two 90 degree Frames off a Spine wall then two UPP90 packages are required.

UPP908W 90 Degree Connector Package, for Rail Profile Frame, with 4-circuit Power $203 Tip: For applications requiring 90-Degree Connectors, Rail Profile Frames are required for structural reasons.

120 Degree Connector Packages - Thin and Rail ProfilesUJ2 2-Way 120 Degree Connector Package, No Power $197 Tip: Only works on Standard Frames (not Mega Frames or Mini Frames)

UC120 3-Way 120 Degree Connector Package, No Power $101

UJP2 2-Way 120 Degree Connector Package, with 3-circuit Power $369 Tip: Only works on Standard Frames (not Mega Frames or Mini Frames) Tip: Includes Brackets, Splitter and Jumper.

UPP120 3-Way 120 Degree Connector Package, with 3-circuit Power $284 Tip: Includes Brackets, Splitter and Jumper.

UJP28W 2-Way 120 Degree Connector Package, with 4-circuit Power $369 Tip: Only works on Standard Frames (not Mega Frames or Mini Frames)

UPP1208W 3-Way 120 Degree Connector Package, with 4-circuit Power $284

Worksurface Tether Brackets, SilverUMTD Tether Brackets for power beltway below worksurface appllications, Silver $26

UMTB Tether Brackets for power beltway above worksurface appllications, Silver $19

Worksurface Tie and Support Plates UTE 1/2” x 2.5” Tie plates - package of 5 $32

USPT 2” x 7.5” Support plate $23

End Cap Conversion Kits (for reconfiguring Frames) - Rail ProfileUZSE Standard Frame Conversion Kit for Rail Profile, End of Run (no opening) $76UZME Standard Frame Conversion Kit for Rail Profile, Middle of Run (opening) $67UZSME Mini Frame Conversion Kit for Rail Profile, End of Run (no opening) $76UZMME Mini Frame Conversion Kit for Rail Profile, Middle of Run (opening) $67UZSBE Mega Frame Conversion Kit for Rail Profile, End of Run (no opening) $76UZMBE Mega Frame Conversion Kit for Rail Profile, Middle of Run (opening) $67

End Cap Conversion Kits (for reconfiguring Frames) - Thin Profile UZSTE Standard Frame Conversion Kit for Thin Profile, End of Run (no opening) $76UZMTE Standard Frame Conversion Kit for Thin Profile, Middle of Run (opening) $67UZSMTE Mini Frame Conversion Kit for Thin Profile, End of Run (no opening) $76UZMMTE Mini Frame Conversion Kit for Thin Profile, Middle of Run (opening) $67

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN LISTED BELOW)

(SIN 711-1)

(SIN 711-9)

(SIN 711-1)

(SIN 711-3)

336

STEP 2 - Legs w/ Casters(@) Caster Color Suffix List:B Black no chargeG Grey +$40 Part Number Description List Price (US$)

T-Legs, Painted Steel with Levelers, package of two LTP182?^ Impression Foot T-Leg, Levelers, for 18”D worksurface (16” spread) $558LTP242?^ Impression Foot T-Leg, Levelers, for 24”D worksurface (22” spread) $567LTP302?^ Impression Foot T-Leg, Levelers, for 30-36”D worksurface (26” spread) $606

Tip: For Solano Foot T-Leg, see page 138. C-Legs, Painted Steel with Levelers, package of two LCP182?^ Impression Foot C-Leg, Levelers, for 18”D worksurface (16” spread) $558LCP242?^ Impression Foot C-Leg, Levelers, for 24”D worksurface (22” spread) $567LCP302?^ Impression Foot C-Leg, Levelers, for 30”D worksurface (26” spread) $606

Tip: For Solano Foot C-Leg, see page 142.

Rectangle Straight Legs, with Levelers LPP?^ Straight Leg, Levelers, Painted Steel $193LPP2?^ Straight Leg, Levelers, Painted Steel, Package of Two $387LPPAL Straight Leg, Levelers, Clear Anodized Aluminum $177LPPAL2 Straight Leg, Levelers, Clear Anodized Aluminum, Package of Two $353

Square Straight Leg, 1.5" x 1.5" LPPSQ^ Square Straight Leg, Painted Steel $193LPPSQ2^ Square Straight Leg, Painted Steel, Package of Two $387LPPSQAL Square Straight Leg, Clear Anodized Aluminum $175LPPSQAL2 Square Straight Leg, Clear Anodized Aluminum, Package of Two $349

Tip: Intended for use in tethered Grid applications. Rectangle Straight Legs, with Casters LPPC?@^ Straight Leg, Caster, Painted Steel $212LPPC2?@^ Straight Leg, Caster, Painted Steel, Package of Two $433LPPALC@ Straight Leg, Caster, Clear Anodized Aluminum $200LPPALC2@ Straight Leg, Caster, Clear Anodized Aluminum, Package of Two $400

Plinth Worksurface Supports, Clear Anodized Aluminum UULP Square Plinth, 3.5"H, used between Landscape Storage and $42 underside of worksurface

Tip: Landscape Storage can be found on pages 334-335. Tip: Contact [email protected] when using Grid Steel Storage.

O-Legs for Worksurfaces, with Levelers, package of oneLSQ18^ O-Leg for 18"D worksurfaces (actual size 16”) $276LSQ24^ O-Leg for 24”D worksurfaces (actual size 22”) $283LSQ30^ O-Leg for 30”D worksurfaces (actual size 28”) $302LSQ36^ O-Leg for 36”D worksurfaces (actual size 34”) $325

Tip: For cable manager, order LPCMC. Tip: For O-Legs for conference applications, see page 115. Tip: Standard height is 27.75”. For shorter heights put “X” in front of the part number and add $54 list. For taller heights put “XX” in front and add $68 list. Maximum worksurface height is 42”.

STEP 3 - Steel Legs Only(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other

Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $350 list fee per order. `Call/email for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through [email protected].

Ordering Information:> Legs and Panels on these pages do NOT support Grid Frames, only worksurfaces. > Taller height anodized aluminum legs not available. > Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Grid Worksurface Supports for Workstations

STEP 1 - Steel Legs Only(?) Routing Holes Suffix ListN No routing holes in leg no chargeY Routing hole in one leg +$62

(SIN LISTED BELOW)

(SIN 711-11)

(SIN 711-11)

(SIN 711-11)

(SIN 711-11)

(SIN 711-11)

(SIN 711-1)

(SIN 711-3)

(SIN 711-9)

337

(*) Worksurface Application Suffix List:B Enwork Height-adjustable freestanding Tables

(actual top depth and width 1-1/8” less than nominal)

C Grid with no gap between worksurface and Frame (actual top depth matches nominal).

D Grid with 1/2" gap between worksurface and Frame (actual top depth 1/2” less than nominal).

V Grid with 1” gap between worksurface and Frame (actual top depth 1” less than nominal).

(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +15% (-38, -60). Orders of 100+ units have

no upcharge.Y Formica Non-Premium Standard +20% (58, 43, MC, SP and NT finishes) and

Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates.

Z Pionite Non-Premium, Nevamar Non- +25% Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica 459-90 Brite White whiteboard laminate.


STEP 1 - End Panels for Worksurfaces Only

STEP 2 - Mid and End Panels


End Panel for Double-Sided Grid Workstations, LaminateUEPDA24# End panel for two 24”D 3mm Tops $505UEPDA30# End panel for two 30”D 3mm Tops $546UEPDK24# End panel for two 24”D Knife Tops $443UEPDK30# End panel for two 30”D Knife Tops $505 Tip: For use with Grid frames when power is above worksurface.

End Panels for Worksurfaces, Laminate with LevelersEP1827A*# End Panel for 18"D Worksurface $254EP2427A*# End Panel for 24"D Worksurface $286EP3027A*# End Panel for 30"D Worksurface $300EP3627A*# End Panel for 36"D Worksurface $339 Tip: Intended for cosmetic purposes beside storage. If no storage is present order CABRACE below. Tip: End panel does not attach to the panel system.

Mid Worksurface Support Panel, Laminate with LevelersEP1027A# Mid panel with levelers, 10”D $214

End Panel Support Brace for Workstations CABRACE End Panel Support, Heavy Duty 11.5"D x 8"H $32

Tip: Used when end panel has no storage nearby for support. Connects end panel to worksurface. One required per end panel.

Worksurface Support Braces, BlackNWBRACE Brace for worksurfaces w/ 54” or more of unsupported $76 knee space, 52"W

Tip: Two braces are required per table for depths of 36” or greater.

End Panel Product Specifications:> Edge: 3mm> 27.75” High x 1.25” thick

Ordering Information:> End Panels include levelers, brackets, and hardware.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Grid End Panels & Worksurface Supports

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN LISTED BELOW)

(SIN 711-1)

(SIN 711-11)

338

Notes

339

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

Notes

340

Ordering Information: > 90-degree and 120 degree power connector packages are on page 309.> 5-wire, 3 circuit power systems come with receptacles. Receptacles for other power systems are listed below.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Base Power Infeed for Grid 5-Wire, 3-Circuit (standard) Powerways, Black UPHASE72 5-Wire Power Infeed, Black, for Hardwire, 72’’ $148UPHASE120 5-Wire Power Infeed, Black, for Hardwire, 120’’ $224UPHASE240 5-Wire Power Infeed, Black, for Hardwire, 240’’ (Power Poles) $368


Base Power Infeed for Grid 5-Wire, 3-Circuit (standard) Powerways, Metallic UPHASE72M 5-Wire Power Infeed, Metallic, for Hardwire, 72’’ $193UPHASE120M 5-Wire Power Infeed, Metallic, for Hardwire, 120’’ $284UPHASE240M 5-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $428 Tip: If Base Power-In is coming into the middle of a spine wall application then a Splitter must be ordered (see below). UYCONN 3-Way Base Power Infeed Splitter $25 Tip: If Base Power-In is coming into the middle of a spine wall application then a splitter is required. Tip: Not required in 8-wire applications.

Base Power Infeed for Grid 8-Wire, 4-Circuit (optional) Powerways, Metallic UPHASE728W 8-Wire Power Infeed, Metallic, for Hardwire, 72’’ $187UPHASE1208W 8-Wire Power Infeed, Metallic, for Hardwire, 120’’ $248UPHASE2408W 8-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $436

NYC Power Entry Kit, Bolt Mount, 72” Length UPHASE5NY 5-Wire Power Entry Kit, NYC, Bolt Mount, 15.59” $154UPHASE8NY 8-Wire Power Entry Kit, NYC, Bolt Mount, 15.59” $154 Power Poles, Two Chamber, Clear Anodized Aluminum, 2.3"W x 2.3"D UPHPP10 Power Pole, 10'H $1170UPHPP12 Power Pole, 12'H $1412UPHPP15 Power Pole, 15'H $1594 Tip: Power Pole has a cable routing hole on side of pole at the bottom. Infeed passes through the hole, across the floor, and into hole at the bottom of the infeed leg. Additional hole(s) can be field cut to allow routing directly into the power system. Tip: Includes mounting hardware and ceiling trim plate. Tip: Power infeed not included. Order 240’’ Base Power Infeed separately.

Grid Electrical Components

STEP 1 - Receptacles(^) Receptacle Color Suffix ListR Black no chargeS Grey no chargeW White no charge

(SIN 711-1)

341

Grid Electrical Retro-Fit ComponentsPart Number Description List Price (US$)

Beltway Tiles with Power/Data Cutouts, Silver (usually ordered with Frame)UESP30 Beltway Tile for Standard or Mega Frame, P/D cutouts, 30”W $45UESP48 Beltway Tile for Standard or Mega Frame, P/D cutouts, 48”W $49UESP60 Beltway Tile for Standard or Mega Frame, P/D cutouts, 60”W $62UESP72 Beltway Tile for Standard or Mega Frame, P/D cutouts, 72”W $68 UESPM30 Beltway Tile for Mini Frame, P/D cutouts, 30”W $45UESPM48 Beltway Tile for Mini Frame, P/D cutouts, 48”W $49UESPM60 Beltway Tile for Mini Frame, P/D cutouts, 60”W $62UESPM72 Beltway Tile for Mini Frame, P/D cutouts, 72”W $68 Beltway Tiles with No Power/Data Cutouts, Silver (usually ordered with Frame) UESN30 Beltway Tile for Standard or Mega Frame, no P/D cutouts, 30”W $49UESN48 Beltway Tile for Standard or Mega Frame, no P/D cutouts, 48”W $54UESN60 Beltway Tile for Standard or Mega Frame, no P/D cutouts, 60”W $65UESN72 Beltway Tile for Standard or Mega Frame, no P/D cutouts, 72”W $72 UESNM30 Beltway Tile for Mini Frame, no P/D cutouts, 30”W $49UESNM48 Beltway Tile for Mini Frame, no P/D cutouts, 48”W $54UESNM60 Beltway Tile for Mini Frame, no P/D cutouts, 60”W $65UESNM72 Beltway Tile for Mini Frame, no P/D cutouts, 72”W $72

5-Wire, 3-Circuit Electrical Add-on Power Kit (usually ordered with Frame)UPK301 Power Kit for 30’’ Frame, 1-sided power $250UPK481 Power Kit for 48’’ Frame, 1-sided power $263UPK601 Power Kit for 60’’ Frame, 1-sided power $336UPK721 Power Kit for 72’’ Frame, 1-sided power $350 UPK302 Power Kit for 30’’ Frame, 2-sided power $308UPK482 Power Kit for 48’’ Frame, 2-sided power $321UPK602 Power Kit for 60’’ Frame, 2-sided power $394UPK722 Power Kit for 72’’ Frame, 2-sided power $407 5-Wire, 3-Circuit Receptacles - 15 amp, Grey (usually ordered as part of Frame) UREC1 Circuit 1 Receptacle, 15 amp $38UREC2 Circuit 2 Receptacle, 15 amp $38UREC3 Circuit 3 Receptacle, 15 amp $38 URDATA Data Adapter Tree for beltway, Grey $20PDDTR Data Adapter Tree for beltway, Black $20PDDTW Data Adapter Tree for beltway, White $20 URDATA2 Data Adapter Plates, Grey $20 URBL Blank Cover for unused Power/Data cutouts on Beltway, Grey $20 Tip: For black, contact [email protected]

5-Wire, 3-Circuit Jumpers for Pass-Thru (Usually ordered as part of Frame) UZJUMP30 Jumper for 30” Frame (48” actual) $103UZJUMP48 Jumper for 48” Frame (66” actual) $139UZJUMP60 Jumper for 60” Frame (78” actual) $166UZJUMP72 Jumper for 72” Frame (90” actual) $189 8-Wire, 4-Circuit Electrical Add-on Power Kit (To Power Non-Powered Frames)UPK30-8TRAC Power Kit for 30” Frame $250UPK48-8TRAC Power Kit for 48” Frame $263UPK60-8TRAC Power Kit for 60” Frame $336UPK72-8TRAC Power Kit for 72” Frame $350UPK84-8TRAC Power Kit for 84” Frame $386


Base Power Infeed for Grid 5-Wire, 3-Circuit (standard) Powerways, Black UPHASE72 5-Wire Power Infeed, Black, for Hardwire, 72’’ $148UPHASE120 5-Wire Power Infeed, Black, for Hardwire, 120’’ $224UPHASE240 5-Wire Power Infeed, Black, for Hardwire, 240’’ (Power Poles) $368


Base Power Infeed for Grid 5-Wire, 3-Circuit (standard) Powerways, Metallic UPHASE72M 5-Wire Power Infeed, Metallic, for Hardwire, 72’’ $193UPHASE120M 5-Wire Power Infeed, Metallic, for Hardwire, 120’’ $284UPHASE240M 5-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $428 Tip: If Base Power-In is coming into the middle of a spine wall application then a Splitter must be ordered (see below). UYCONN 3-Way Base Power Infeed Splitter $25 Tip: If Base Power-In is coming into the middle of a spine wall application then a splitter is required. Tip: Not required in 8-wire applications.

Base Power Infeed for Grid 8-Wire, 4-Circuit (optional) Powerways, Metallic UPHASE728W 8-Wire Power Infeed, Metallic, for Hardwire, 72’’ $187UPHASE1208W 8-Wire Power Infeed, Metallic, for Hardwire, 120’’ $248UPHASE2408W 8-Wire Power Infeed, Metallic, for Hardwire, 240’’ (use with Power Poles) $436

NYC Power Entry Kit, Bolt Mount, 72” Length UPHASE5NY 5-Wire Power Entry Kit, NYC, Bolt Mount, 15.59” $154UPHASE8NY 8-Wire Power Entry Kit, NYC, Bolt Mount, 15.59” $154 Power Poles, Two Chamber, Clear Anodized Aluminum, 2.3"W x 2.3"D UPHPP10 Power Pole, 10'H $1170UPHPP12 Power Pole, 12'H $1412UPHPP15 Power Pole, 15'H $1594 Tip: Power Pole has a cable routing hole on side of pole at the bottom. Infeed passes through the hole, across the floor, and into hole at the bottom of the infeed leg. Additional hole(s) can be field cut to allow routing directly into the power system. Tip: Includes mounting hardware and ceiling trim plate. Tip: Power infeed not included. Order 240’’ Base Power Infeed separately.

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN LISTED BELOW)

(SIN 711-1)

(SIN 711-11)

(SIN 711-1)

(SIN 711-3)

(SIN 711-1)

342

Product Specifications:> Side and back edges are flat.

Ordering Information:> Bracing requirements are outlined on page 23. Braces are listed on page 311.> Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


3MM EDGE PVC PLY EDGE KNIFE EDGE TAPER EDGE

D1 D2 W1 W2 Part Number Suffix A Suffix L Suffix K Suffix T

18 - 24 - S1824&*@# $166 $215 $215 $23618 - 30 - S1830&*@# $175 $175 $227 $24918 - 36 - S1836&*@# $186 $186 $239 $26518 - 42 - S1842&*@# $232 $232 $299 $32918 - 48 - S1848&*@# $234 $234 $303 $33318 - 54 - S1854&*@# $287 $287 $371 $40718 - 60 - S1860&*@# $301 $301 $388 $42818 - 66 - S1866&*@# $323 $323 $418 $46018 - 72 - S1872&*@# $334 $334 $431 $47418 - 78 - S1878&*@# $398 $398 $514 $56618 - 84 - S1884&*@# $421 $421 $542 $59618 - 90 - S1890&*@# $437 $437 $564 $62118 - 96 - S1896&*@# $450 $450 $581 $639 24 - 24 - S2424&*@# $174 $174 $224 $24524 - 30 - S2430&*@# $183 $183 $237 $26024 - 36 - S2436&*@# $198 $198 $255 $28024 - 42 - S2442&*@# $234 $234 $303 $33324 - 48 - S2448&*@# $242 $242 $312 $34624 - 54 - S2454&*@# $297 $297 $382 $42124 - 60 - S2460&*@# $306 $306 $395 $43524 - 66 - S2466&*@# $328 $328 $424 $46524 - 72 - S2472&*@# $347 $347 $447 $49224 - 78 - S2478&*@# $407 $407 $526 $58024 - 84 - S2484&*@# $432 $432 $558 $61524 - 90 - S2490&*@# $447 $447 $576 $63424 - 96 - S2496&*@# $460 $460 $594 $655

Grid Straight Worksurfaces (SIN 711-11)

STEP 1(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge with Ply LookK Standard Laminate – Knife EdgeT Contour Laminate – Taper Edge

Tip: Side and back edges are flat.

STEP 2(*) Worksurface Application Suffix List:B Enwork Height-adjustable freestanding

Tables (actual top depth and width 1-1/8” less than nominal). Use on XTB4 and Freestanding Adjustable Tables.



J Worksurface for use with Ambition screens (actual top depth 1-1/8” and width 1-1/2” less than nominal).


STEP 3(@) Cable Management Suffix List:N No cable management No chargeG Grommet (one, center rear) +$19S Scallop (one, center rear) +$23T Full Scallop 1"D (one, center rear) +$23A Full Scallop 3"D (one, center rear)* +$23

* For use on crank/electric height-adjustable tops with freestanding power beams.

Tip: Grommet and edge color are pre-defined to match laminate color. See page 21.

STEP 4(#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, +15% -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +20% 43, MC, SP and NT finishes) and Wilsonart





343




30 - 24 - S3024&*@# $211 $211 $274 $53730 - 30 - S3030&*@# $238 $238 $307 $57630 - 36 - S3036&*@# $266 $266 $344 $61530 - 42 - S3042&*@# $290 $290 $375 $65030 - 48 - S3048&*@# $320 $320 $411 $69130 - 54 - S3054&*@# $361 $361 $466 $75030 - 60 - S3060&*@# $370 $370 $476 $76230 - 66 - S3066&*@# $405 $405 $523 $81330 - 72 - S3072&*@# $422 $422 $545 $83730 - 78 - S3078&*@# $485 $485 $627 $92730 - 84 - S3084&*@# $498 $498 $642 $94530 - 90 - S3090&*@# $535 $535 $691 $99730 - 96 - S3096&*@# $546 $546 $704 $1013 36 - 24 - S3624&*@# $268 $268 $347 $53936 - 30 - S3630&*@# $283 $283 $366 $57736 - 36 - S3636&*@# $314 $314 $406 $61636 - 42 - S3642&*@# $322 $322 $415 $65136 - 48 - S3648&*@# $354 $354 $457 $69236 - 54 - S3654&*@# $508 $514 $660 $81636 - 60 - S3660&*@# $508 $514 $660 $81636 - 66 - S3666&*@# $508 $514 $660 $81636 - 72 - S3672&*@# $570 $575 $741 $84236 - 78 - S3678&*@# $710 $717 $923 $101836 - 84 - S3684&*@# $710 $717 $923 $101836 - 90 - S3690&*@# $710 $717 $923 $101836 - 96 - S3696&*@# $710 $717 $923 $1018

D1

W1

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(Grain Direction)

(SIN 711-11)

Tip: Grain runs the width of the worksurface. If pairing with extended corners, grain direction will be the opposite direction. Alternate grain direction is available on small straights at no charge. Put an “X” in front of the part number and freeform “FRONT-TO-BACK GRAIN DIRECTION” on your order.

344

STEP 1(&) Finish and Edge Suffix List:A Standard Laminate – 3mm EdgeL Standard Laminate – PVC Edge with

Ply LookK Standard Laminate – Knife EdgeT Contour Laminate – Taper Edge


STEP 2(*) Worksurface Application Suffix List:C Grid with no gap between worksurface and

Frame (actual top depth matches nominal). D Grid with 1/2" gap between worksurface

and Frame (actual top depth 1/2” less than nominal).


STEP 3(@) Cable Management Suffix List:N No cable management No chargeG Grommet (one, center rear) +$19S Scallop (two, 8” from corner) +$46B Full Scallop 3"D (left)* +$23C Full Scallop 3"D (right)* +$23D Full Scallop 3"D (left and right)* +$46K Power/Data Cut-out for Node +$37 (one, center rear)

* For use on crank/electric height-adjustable tops with freestanding Grid Frames.








Ordering Information: > Rear corner supports are not included. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

D1

W1

D2

W2




18 18 36 36 CC1836&*@# $359 $359 $462 $48718 18 42 42 CC1842&*@# $418 $418 $540 $56718 18 48 48 CC1848&*@# $424 $424 $546 $572 24 24 36 36 CC2436&*@# $359 $359 $462 $48724 24 42 42 CC2442&*@# $424 $424 $546 $57224 24 48 48 CC2448&*@# $432 $432 $558 $58624 24 60 60 CC2460&*@# $582 $582 $752 n/a 30 30 42 42 CC3042&*@# $454 $454 $585 $61530 30 48 48 CC3048&*@# $477 $477 $616 $64730 30 60 60 CC3060&*@# $585 $585 $757 n/a

Grid Curved Corner Worksurfaces (SIN 711-11)

345

Notes

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

346



STEP 2(*) Worksurface Application Suffix List:B Enwork Height-adjustable freestanding Tables

(actual top depth and width 1-1/8” less than nominal). Use on XTB4 and Freestanding Adjustable Tables.



J Worksurface for use with Ambition screens (actual top depth 1-1/8” and width 1-1/2” less than nominal).


STEP 3(@) Cable Management Suffix List:N No cable management No chargeG Grommet (one, corner) +$19S Scallop (two, 8” from corner) +$46U Full Scallop 1"D (left) +$23V Full Scallop 1"D (right) +$23W Full Scallop 1"D (left and right) +$46B Full Scallop 3"D (left)* +$23C Full Scallop 3"D (right)* +$23D Full Scallop 3"D (left and right)* +$46








Product Specifications:> Side and back edges are flat

Ordering Information:> Rear corner supports are not included. > Bracing requirements are outlined on page 23. Braces are listed on page 311.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.



D1 D2 W1 W2 O Part Number Suffix A Suffix L Suffix K Suffix T

24 24 60 36 LH EC226036&*@# $495 $495 $638 $66824 24 66 36 LH EC226636&*@# $553 $553 $715 $75124 24 72 36 LH EC227236&*@# $607 $607 $785 $82324 24 60 42 LH EC226042&*@# $502 $502 $647 $67924 24 66 42 LH EC226642&*@# $553 $553 $715 $75124 24 72 42 LH EC227242&*@# $607 $607 $785 $82324 24 60 48 LH EC226048&*@# $528 $528 $680 $71524 24 66 48 LH EC226648&*@# $581 $581 $749 $78724 24 72 48 LH EC227248&*@# $634 $634 $818 $85824 24 36 60 RH EC223660&*@# $495 $495 $638 $66824 24 36 66 RH EC223666&*@# $553 $553 $715 $75124 24 36 72 RH EC223672&*@# $607 $607 $785 $82324 24 42 60 RH EC224260&*@# $502 $502 $647 $67924 24 42 66 RH EC224266&*@# $553 $553 $715 $75124 24 42 72 RH EC224272&*@# $607 $607 $785 $82324 24 48 60 RH EC224860&*@# $528 $528 $680 $71524 24 48 66 RH EC224866&*@# $581 $581 $749 $78724 24 48 72 RH EC224872&*@# $634 $634 $818 $858 30 30 60 48 LH EC336048&*@# $579 $579 $747 $78430 30 66 48 LH EC336648&*@# $630 $630 $813 $85430 30 72 48 LH EC337248&*@# $683 $683 $882 $92730 30 48 60 RH EC334860&*@# $579 $579 $747 $78430 30 48 66 RH EC334866&*@# $630 $630 $813 $85430 30 48 72 RH EC334872&*@# $683 $683 $882 $927

Grid Extended Curved Corner Worksurfaces (SIN 711-11)

347



D1 D2 W1 W2 O Part Number Suffix A Suffix L Suffix K Suffix T

24 30 60 36 LH EC236036&*@# $523 $523 $673 $70724 30 66 36 LH EC236636&*@# $581 $581 $749 $78724 30 72 36 LH EC237236&*@# $634 $634 $818 $85824 30 60 48 LH EC236048&*@# $553 $553 $715 $75124 30 66 48 LH EC236648&*@# $607 $607 $785 $82324 30 72 48 LH EC237248&*@# $660 $660 $853 $89324 30 36 60 RH EC233660&*@# $523 $523 $673 $70724 30 36 66 RH EC233666&*@# $581 $7581 $749 $78724 30 36 72 RH EC233672&*@# $634 $634 $818 $85824 30 48 60 RH EC234860&*@# $553 $553 $715 $75124 30 48 66 RH EC234866&*@# $607 $607 $785 $82324 30 48 72 RH EC234872&*@# $660 $660 $853 $893 30 24 60 36 LH EC326036&*@# $523 $523 $673 $70730 24 66 36 LH EC326636&*@# $581 $581 $749 $78730 24 72 36 LH EC327236&*@# $634 $634 $818 $85830 24 60 48 LH EC326048&*@# $553 $553 $715 $75130 24 66 48 LH EC326648&*@# $607 $607 $785 $82330 24 72 48 LH EC327248&*@# $660 $660 $853 $89330 24 36 60 RH EC323660&*@# $523 $523 $673 $70730 24 36 66 RH EC323666&*@# $581 $581 $749 $78730 24 36 72 RH EC323672&*@# $634 $634 $818 $85830 24 48 60 RH EC324860&*@# $553 $553 $715 $75130 24 48 66 RH EC324866&*@# $607 $607 $785 $82330 24 48 72 RH EC324872&*@# $660 $660 $853 $893

D1

W1

Left-hand

W2

D2

W1

D2

Right-hand

W2

D1

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(Grain Direction) (Grain Direction)

Tip: Grain runs the width of the worksurface. If adding a straight worksurface, see tip on page 317 to achieve matching grain direction.

(SIN 711-11)

348



STEP 2 (*) Worksurface Application Suffix List:B Enwork Height-adjustable freestanding Tables

(actual top depth and width 1-1/8” less than nominal). Use on XTB4 and Freestanding Adjustable Tables.









(@) Cable Management Suffix List:N No cable management No chargeG Grommet (one, center rear) +$19S Scallop (two, 8” from corner) +$46U Full Scallop 1"D (left) +$23V Full Scallop 1"D (right) +$23W Full Scallop 1"D (left and right) +$46B Full Scallop 3"D (left)* +$23C Full Scallop 3"D (right)* +$23D Full Scallop 3"D (left and right)* +$46



STEP 3


Ordering Information:> Rear corner supports are not included with 120 corner worksurfaces. > The corner dimension for TC224848 is deeper when Worksurface Application Suffix “A” is specified in Step 2. See diagram.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.




24 24 36 36 TC223636&*@# $582 $582 $752 $79624 24 42 42 TC224242&*@# $738 $738 $953 $100024 24 48 48 TC224848&*@# $738 $738 $953 $100024 24 60 60 TC226060&*@# $1096 $1096 $1421 n/a 30 30 36 36 TC333636&*@# $624 $624 $804 $85330 30 42 42 TC334242&*@# $738 $738 $953 $100030 30 48 48 TC334848&*@# $738 $738 $953 n/a

Tip: Laminate grain direction is non-standard on the 24x24x60x60 corner (runs along W2). See page 20 for defaults.

**Tip: The corner dimension for TC224848 is deeper when Worksurface Application Suffix “A” is specified in Step 2. See diagram.

D2

W1

D1

W2

120 Corner Worksurface

Grid 120 Corner Worksurfaces

TC224848 worksurface shape when "A” is selected in Step 2

(SIN 711-11)

349








3MM EDGE PVC KNIFE EDGE TAPER EDGE PLY EDGE

D1 D2 W1 W2 Part Number Suffix A Suffix L Suffix K Suffix T 27 - 51 - SP51&E# $403 $403 $520 $54533 - 63 - SP63&E# $535 $535 $691 $725

D1

W1

Spanner Worksurface

Product Specifications:> Back edge is flat.

Ordering Information:> Column support is ordered separately for spanner worksurfaces. See page 163.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

Grid Spanner Worksurfaces

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-11)

350


STEP 2 (#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates (-38, +15% -60). Orders of 100+ units have no upcharge.Y Formica Non-Premium Standard (58, +20% 43, MC, SP and NT finishes) and Wilsonart





Product Specifications:> Side edges are flat.

Ordering Information: > A freight fee of $100 net is assessed on orders less

than $1000 net. See page 13.D1

W1


3MM EDGE PVC KNIFE EDGE TAPER EDGE PLY EDGE


16 - 24 - S1624&CN# $190 $190 $221 $23116 - 30 - S1630&CN# $202 $202 $238 $25016 - 36 - S1636&CN# $215 $215 $254 $26616 - 42 - S1642&CN# $233 $233 $271 $28316 - 48 - S1648&CN# $245 $245 $297 $31016 - 54 - S1654&CN# $297 $297 $358 $37516 - 60 - S1660&CN# $306 $306 $383 $40216 - 66 - S1666&CN# $339 $339 $419 $43816 - 72 - S1672&CN# $360 $360 $444 $46616 - 78 - S1678&CN# $425 $425 $535 $56116 - 84 - S1684&CN# $439 $439 $568 $59416 - 90 - S1690&CN# $441 $441 $570 $59716 - 96 - S1696&CN# $458 $458 $591 $620

Enwork Grid Mounting Hardware for Transaction Worksurfaces S16HDW Grid mounting hardware (4 pc.), silver $170 Tip: Knife edge transaction tops must be 18”D to work with this hardware. Contact [email protected]. Tip: Use only with 42” Standard Grid Frame (positioned for power above worksurface).

Grid Transaction Worksurfaces (SIN 711-11)

351

Notes

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

352

Ordering Information: > 3Form products are available for use as Grid topper Screens. Contact [email protected] for more information. > Some products may be available for quick ship. Contact [email protected]. > A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Acrylic Topper Screens for Frames, 11.25"HUMTP30 Acrylic Topper Screen, 30”W $152UMTP48 Acrylic Topper Screen, 48”W $173UMTP60 Acrylic Topper Screen, 60”W $198UMTP72 Acrylic Topper Screen, 72”W $253UMTP84 Acrylic Topper Screen, 84”W $288

Markerboard Glass Topper Screens for Frames, 11.25"H UMTPG30 Markerboard Glass Topper Screen, 30”W $268UMTPG48 Markerboard Glass Topper Screen, 48”W $426UMTPG60 Markerboard Glass Topper Screen, 60”W $551UMTPG72 Markerboard Glass Topper Screen, 72”W $652 Tip: Product consists of two 1/8” pieces of tempered glass with white laminated sides bonded together.

Frosted Glass Topper Screens for Frames, 11.25"HUMTPY30 Frosted Glass Topper Screen, 30”W $324UMTPY48 Frosted Glass Topper Screen, 48”W $526UMTPY60 Frosted Glass Topper Screen, 60”W $665UMTPY72 Frosted Glass Topper Screen, 72”W $805

Acid-Etched (Frosted) Glass Topper Screen with Large Knots Design for Frames, 11.25"HUMTPW30 Large Knots Pattern Etched Glass Topper Screen, 30”W $359UMTPW48 Large Knots Pattern Etched Glass Topper Screen, 48”W $562UMTPW60 Large Knots Pattern Etched Glass Topper Screen, 60”W $703UMTPW72 Large Knots Pattern Etched Glass Topper Screen, 72”W $844

Tip: Product consists of one 1/4” piece of tempered glass with Large Knots design laser-etched on one side.

Grid Topper Screens





(&) Acoustic Color Suffix List:L Light Grey no chargeM Medium Grey no chargeC Charcoal no chargeZ Other +$TBD

STEP 1 - Acoustic Topper

(SIN 711-1)

353

Notes

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

354

STEP 1 - If Applicable (#) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) no chargeD Wilsonart Pinnacle Walnut (7992-38) no chargeE Wilsonart Fashion Grey (D381-60) no chargeH Wilsonart Field Elm (7999K-12) no chargeJ Wilsonart Grey Elm (8201K-12) no chargeK Wilsonart Ebony Recon (7997-38) no chargeM Wilsonart Frosty White (1573-60) no chargeP Wilsonart Slate Grey (D91-60) no chargeQ Wilsonart Portico Teak (8210K-28) no chargeR Wilsonart Black (1595-60) no chargeV Wilsonart River Cherry (7937-38) no chargeW Wilsonart Designer White (D354-60) no charge3 Formica Neutral Twill (8826-58) no charge4 Formica Bleached Legno (8845-58) no charge7 Formica Select Cherry (7759-43) no chargeX Wilsonart Non-Premium laminates (-38, -60) +35%Y Formica Non-Premium (includes 58, 43, +45% MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium

(-07,-12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.






Privacy Screens and Modesty PanelsProduct Specifications> Clamp Privacy Screens and Modesty Panels 48”W and smaller include two clamps, 54”W and

wider include three clamps.

Ordering Information:> Clamp privacy screens 36”-72”W and Modesty Panels are screwed to the underside of the worksurface. > Clamp screens 24”-30”W are designed for side-to-side privacy and screw to the underside of the worksurface

front edge (only). Knob attachment is available, email [email protected]> For COM yardage, see page 16.> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Pac-Man Universal Privacy Screens, Brackets included, 19"H x 30"DUPM# Laminate Pac-Man Privacy Screen $374UPM2 Frosted Acrylic Pac-Man Privacy Screen $384

Tip: 30”D Divider covers 22” of worksurface and hangs 8” off. 13” of screen is above worksurface, 4.75” below worksurface. Tip: Fits all 1.125" - 1.25" thick worksurfaces

(SIN 711-1)

355


Universal 2-Sided Tackable Fabric Privacy Screen - 1” Thick, 13”H AAG24? Tackable Fabric Privacy Screen, 1” Thick, 24”W $329AAG30? Tackable Fabric Privacy Screen, 1” Thick, 30”W $379AAG36? Tackable Fabric Privacy Screen, 1” Thick, 36”W $391AAG42? Tackable Fabric Privacy Screen, 1” Thick, 42”W $422AAG48? Tackable Fabric Privacy Screen, 1” Thick, 48”W $435AAG54? Tackable Fabric Privacy Screen, 1” Thick, 54”W $562AAG60? Tackable Fabric Privacy Screen, 1” Thick, 60”W $574AAG66? Tackable Fabric Privacy Screen, 1” Thick, 66”W $587AAG72? Tackable Fabric Privacy Screen, 1” Thick, 72”W $598

Tip: Includes L-brackets, hardware and tackable screen (tackable fabric on both sides). Tip: Must be used in application where L-brackets can attach to the underside of worksurface. Tip: Two panels in 90-degree orientation will not work. Requires a special width.

Universal 2-Sided Tackable Fabric Privacy Screen, Aluminum Frame - 13"HAAUH24? Tackable Fabric Privacy Screen, 24’’W $489AAUH30? Tackable Fabric Privacy Screen, 30’’W $540

Tip: Attached with industrial strength double-face tape. Optional Grid attachment bracket available, see AAUABRKT.

Universal Frosted Acrylic Privacy Screen, Aluminum Frame - 13"HAAUA24 Acrylic Privacy Screen, 24’’W $375AAUA30 Acrylic Privacy Screen, 30’’W $402

Tip: Attached with industrial strength double-face tape. Optional Grid attachment bracket available, see AAUABRKT.

AAUABRKT Bracket to attach 1 upper corner of AAUA or AAUH $38 to top of Grid Frame Tip: Works on standard Grid Frame (not Mini or Mega) with Rail Profile (original design) only. Frame must be in 42”H (power above) position.

All-In-One Privacy/Modesty Screen, Double-Sided Laminate, .75" thickUG48# Desk Mounted Privacy/Modesty Screen, 48”W $371UG60# Desk Mounted Privacy/Modesty Screen, 60”W $456UG72# Desk Mounted Privacy/Modesty Screen, 72”W $533

Tip: Screen attaches to bottom of worksurface and sits behind surface. Screen is 13” above surface and 16” below surface.

Tackboards for Laminate All-in-One Privacy/Modesty Screens UG48T? Tackboard for use with UG48 Screen $199UG60T? Tackboard for use with UG60 Screen $233UG72T? Tackboard for use with UG72 Screen $277

Tip: Sits above worksurface and faces user. Tip: Tackboard is .75" thick.

All-in-One Privacy/Modesty Screen, Frosted AcrylicUGAC48 Frosted Acrylic Desk Mounted Privacy/Modesty 48”W $584UGAC60 Frosted Acrylic Desk Mounted Privacy/Modesty 60”W $669UGAC72 Frosted Acrylic Desk Mounted Privacy/Modesty 72”W $754

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-1)

356


Slotted Modesty Panels for Frames, Painted Steel, 12"HUMP30^ Slotted Modesty Panel, 30”W $156UMP48^ Slotted Modesty Panel, 48”W $164UMP60^ Slotted Modesty Panel, 60”W $216UMP72^ Slotted Modesty Panel, 72”W $225UMP84^ Slotted Modesty Panel, 84”W $259




STEP 1 - Slotted Modesty Panels

Grid Modesty Panels (SIN 711-1)

357

Notes

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

358

Grid Accessories



STEP 1 Ordering Information:> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Monitor Riser, Steel, 11”D URISER28^ Monitor Riser for Single Monitor, 28”W $339URISER39^ Monitor Riser for Double Monitors, 39”W $427

High Capacity Cable Trough for Grid Frames, 2.25” Trough Depth, 4”H x 2.5”D UMHCP36^ 36” High Capacity Trough $76UMHCP48^ High Capacity Trough for 48” Frame $88UMHCP60^ High Capacity Trough for 60” Frame $121UMHCP72^ High Capacity Trough for 72” Frame $144

Tip: Specify worksurface suffix D or V or Full Scallops to receive gap between Frame and top for access to trough.

Vertical Cable Managers with weighted basePDVCMR Vertical Cable Manager, flexible spine, 30”, worksurface attached, Black $198PDVCMS Vertical Cable Manager, flexible spine, 30”, worksurface attached, Silver $198 ULCM Vertical Cable Manager, flexible spine, 1.5” diameter, Black $163

Center Drawers - Non-Locking, Black PlasticCDRAWER Center Drawer, Non-Locking, 13”W x 17”D x 1.75”H $126

Tip: Metal center drawer is found in Apex. CPU Holders, blackCPHF CPU Holder, Fixed $273CPHS CPU Holder, Swivel $468 Tip: Width adjustment is 5.5-9.25”, height adjustment is 13.4-20.5”, Very small CPUs may not fit.

(SIN LISTED BELOW)

(SIN 711-1)

(SIN 711-2)

(SIN 711-1)

(SIN 711-11)

(SIN 711-2)

359

Product Specifications:> Work tools attach to Top Rail side slot in Grid Rail Profile Frames.



Grid Accessories for Rail Profile Frames, Clear Plastic

TPE Pencil Holder $20

TTP Paper Tray $49

TAT Accessory Tray $36

TPH Phone Holder $40

TFT Folder Tray $59

Grid Worktools for Rail Profile Frames

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN LISTED BELOW)

(SIN 711-1)

(SIN 711-11)

(SIN 711-1)

(SIN 711-3)

(SIN 711-1)

360

RH

LH


Landscape Box-Lateral Files 18 30 24 UUBFLAT30^#@ Box-Lateral, 30”W $147818 36 24 UUBFLAT36^#@ Box-Lateral, 36”W $1545 Landscape Bookcases with Adjustable Shelf 18 18 24 UUBK18^@ Bookcase, 18”W $111418 24 24 UUBK24^@ Bookcase, 24”W $113418 30 24 UUBK30^@ Bookcase, 30”W $115218 36 24 UUBK36^@ Bookcase, 36”W $1218

Landscape Personal Towers with Single Door and Adjustable Shelves 18 12 42 UUPA42R^#@ Tower w/ RH Door, 12”W $153418 12 42 UUPA42L̂ #@ Tower w/ LH Door, 12”W $1534

Tip: Must be ganged (using provided shared feet) with another piece of Landscape storage.

18 12 42 UUPC42R^#@ Tower w/ RH Door, Coat Rod, 12”W $148418 12 42 UUPC42L̂ #@ Tower w/ LH Door, Coat Rod, 12”W $1484

Tip: Must be ganged (using provided shared feet) with another piece of Landscape storage.



STEP 3(@) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60)D Wilsonart Pinnacle Walnut (7992-38)E Wilsonart Fashion Grey (D381-60)H Wilsonart Field Elm (7999K-12)J Wilsonart Grey Elm (8201K-12)K Wilsonart Ebony Recon (7997-38)M Wilsonart Frosty White (1573-60)O Wilsonart Crisp Linen (4942-38)P Wilsonart Slate Grey (D91-60)Q Wilsonart Portico Teak (8210K-28)R Wilsonart Black (1595-60) V Wilsonart River Cherry (7937-38)W Wilsonart Designer White (D354-60)3 Formica Neutral Twill (8826-58)4 Formica Bleached Legno (8845-58)7 Formica Select Cherry (7759-43)X Wilsonart Non-Premium laminates +$40 (-38, -60). Orders of 100+ units have no

upcharge.Y Formica Non-Premium Standard +$55 (58, 43, MC, SP and NT finishes) and Wilsonart Premium (-07, -12, -18, -28, -52, -78) laminates. Z Pionite Non-Premium, Nevamar +$79

Non-Premium, Formica Premium (WR, 42, 77, 46, RD Finishes), and Formica

459-90 Brite White whiteboard laminate.Wilsonart virtual design library Y series laminates are not included in the above upcharges. For pricing, contact [email protected].

Product Specifications:> Steel Storage with laminate tops> Lock cores are LL Series. UM Series lock cores are available upon request.> Bookcase adjustable shelf has room for cord management behind shelf.> Landscape Storage feet are 3-1/8” high square clear anodized aluminum. > Four feet or four casters included with each component. Six feet included with combination units since center feet are

shared.> Tops are 3/4” thick, high pressure laminate, 3mm edge

Ordering Information: > (see page 335)

STEP 2(#) Pull Suffix List:

(A) Arc (B) Bar (R) Rod

Tip: Rod pull is 6.5” long on Personal Cabinet. Rod pull is 20.5” long on Personal Tower and Box-Lateral.

Landscape Storage (SIN 711-3)

361

Ordering Information: > All doors and drawers are locking except sliding doors on bookcases. Default Keying is random.

See page 17 for Keyed-alike (no charge).> Counterweights included on Box-Laterals.> Tops and Landscape Storage feet are field installed. Casters ship installed.> Combinations feature shared (fewer) legs and a common top. No case bolting required.> Additional Combinations are available. Contact [email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Combination Box-Lateral and Bookcase (no doors) with Common Top and Shared Feet18 48 24 UU48AR^#@ 30” Box Lateral (right) and 18” Bookcase (left), 48” top $239718 54 24 UU54AR^#@ 30” Box Lateral (right) and 24” Bookcase (left), 54” top $248118 60 24 UU60AR^#@ 30” Box Lateral (right) and 30” Bookcase (left), 60” top $250018 72 24 UU72AR^#@ 36” Box Lateral (right) and 36” Bookcase (left), 72” top $2634 18 48 24 UU48AL̂ #@ 30” Box Lateral (left) and 18” Bookcase (right), 48” top $239718 54 24 UU54AL̂ #@ 30” Box Lateral (left) and 24” Bookcase (right), 54” top $248118 60 24 UU60AL̂ #@ 30” Box Lateral (left) and 30” Bookcase (right), 60” top $250018 72 24 UU72AL̂ #@ 36” Box Lateral (left) and 36” Bookcase (right), 72” top $2634

Plinth, Clear Anodized Aluminum UULP Square Plinth, 3.5"H, used between Landscape Storage and bottom of worksurface $42

STEEL STORAGE OPTIONSFor lower cost Grid steel storage see page 336.

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-3)

362

STEP 1 - Seat Cushions for Landscape Storage(^) Fabric Suffix List:> Free form fabric selection. Choose from

Camira Era or the Mill Collection fabrics.

Tip: To view fabric colors or to order samples go to www.camirafabrics.com/us. Tip: For COM yardage, see page 16.

Ordering Information: > Grid Steel Storage has Steel top and levelers> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.


Seat Cushions for Landscape Storage 18 12 2 U9CUSH12^ Seat Cushion, 12”W $19018 18 2 U9CUSH18^ Seat Cushion, 18”W $22018 24 2 U9CUSH24^ Seat Cushion, 24”W $24618 30 2 U9CUSH30^ Seat Cushion, 30”W $27718 36 2 U9CUSH36^ Seat Cushion, 36”W $33118 42 2 U9CUSH42^ Seat Cushion, 42”W $35218 48 2 U9CUSH48^ Seat Cushion, 48”W $37918 54 2 U9CUSH54^ Seat Cushion, 54”W $46318 60 2 U9CUSH60^ Seat Cushion, 60”W $50918 66 2 U9CUSH66^ Seat Cushion, 66”W $53118 72 2 U9CUSH72^ Seat Cushion, 72”W $583 Tip: Free form your fabric selection. Choose from Camira Era or the Mill Collection fabrics. See www.camirafabrics.com/us for more information. Tip: For COM yardage, see page 16. Tip: Includes velcro installation.


Grid Steel Box-Lateral Files18 30 21.5 UABL30^@ Steel Box Lateral File, 30”W $114718 36 21.5 UABL36^@ Steel Box Lateral File, 36”W $122018 42 21.5 UABL42^@ Steel Box Lateral File, 42”W $1336

Tip: Counterweight is included in Box-Lateral Storage.

Grid Steel Bookcases with Adjustable Shelf18 18 21.5 UABK18^ Steel Bookcase, 18”W $73518 24 21.5 UABK24^ Steel Bookcase, 24”W $78818 30 21.5 UABK30^ Steel Bookcase, 30”W $81518 36 21.5 UABK36^ Steel Bookcase, 36”W $86718 42 21.5 UABK42^ Steel Bookcase, 42”W $932

Landscape Storage & Grid Steel Storage

STEP 1 - Grid Steel Storage(^) Paint Suffix ListG StormR BlackS SilverT Medium ToneW Arctic WhiteZ Other


STEP 2 - Grid Steel Storage(@) Pull Suffix List:

(A) Arc (B) Bar (R) Rod

(SIN 711-1)

(SIN 711-3)

(SIN LISTED BELOW)

363

Tote Pull

Pulling Options

Pull on Lock Bar

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID


Pedestals - Open Top18 15 27.5 A2P18FF^#@ 18”D F/F Ped - full ext. files $59118 15 27.5 A2P18BBFE^#@ 18”D B/B/F Ped - full ext. boxes, full ext. file $61222 15 27.5 A2P24FF^#@ 24”D F/F Ped - full ext. slide $56022 15 27.5 A2P24BBFE^#@ 24”D B/B/F Ped - full ext. boxes, full ext. file $58128 15 27.5 A2P30FF^#@ 30”D F/F Ped - full ext. slide $74728 15 27.5 A2P30BBFE^#@ 30”D B/B/F Ped - full ext. boxes, full ext. file $809 Tip: Box drawers do not include dividers. Tip: Laminate fronts are available as an option (lock bar is painted). Add a "Z" to the front of the part number and see Step 3 to specify laminate. Tip: 18” D peds do not support legal filing. Tip: As of March 2015, 24”D pedestals fit under 24” Apex shells. 30”D pedestals fit under 30” Apex shells.

Mobile Pedestals - Steel Top18 15 22.3 A2MP18BFE^#@ 18”D B/F Mobile Ped - full ext. box, full ext. file $59018 15 27.2 A2MP18BBFE^#@ 18”D B/B/F Mobile Ped - full ext. box, full ext. file $70818 15 27.2 A2MP18FF^#@ 18”D F/F Mobile Ped - full ext. slide $65222 15 22.3 A2MP24BFE^#@ 24”D B/F Mobile Ped - full ext. box, full ext. file $60122 15 27.2 A2MP24BBFE^#@ 24”D B/B/F Mobile Ped - full ext. box, full ext. file $73222 15 27.2 A2MP24FF^#@ 24”D F/F Mobile Ped - full ext. slide $673

Tip: Casters require field installation. Counterweight included. Tip: Box drawers do not include dividers. Tip: Laminate fronts are available as an option (lock bar is painted). Add a "Z" to the front of the part number and see Step 3 to specify laminate. Tip: Box Box File and File File will hit NWBRACE if NWBRACE is supporting top. Tip: Additional lock bar pull or tote pull available on mobile peds. See Step 2.

Seat Cushions for Apex Pedestals, Magnet Installation - 2"x15"x18" A2CUSH18 Apex Ped Cushion, 18", Camira Era or $200 the Mill Collection Fabrics, specify pattern & color A2CUSHCOM18 Apex Ped Cushion, 18", $200 COM Fabric

Seat Cushions for Apex Pedestals, Magnet Installation - 2"x15"x22" A2CUSH24 Apex Ped Cushion, 22", Camira Era or $222 the Mill Collection Fabrics, specify pattern & color A2CUSHCOM24 Apex Ped Cushion, 22", $222 COM Fabric Tip: To view Camira fabrics or to order samples, go to www.camirafabrics.com/us. Tip: For COM yardage, see page 16.

Apex Steel Storage - Pedestals


STEP 1

(#) Pull Suffix List:STEP 2 - for Open Top Peds Only

(#) Pull Suffix List:A Arc, Aluminum no chargeJ Arc, Aluminum w/ add. Arc pull on lock cover +$36K Arc, Aluminum w/ Tote pull +$180B Bar no chargeL Bar w/ additional Bar pull on lock cover +$36M Bar w/ Tote pull +$180R Rod no chargeP Rod w/ additional Rod pull on lock cover +$36Q Rod w/ Tote pull +$180I Integral no chargeT Integral w/ additional Arc pull on lock cover +$36U Integral w/ Tote pull +$180

STEP 2 - for Mobile Peds, Steel Top Only

(@) Laminate Suffix List:A Wilsonart Kensington Maple (10776-60) +$206D Wilsonart Pinnacle Walnut (7992-38) +$206E Wilsonart Fashion Grey (D381-60) +$206H Wilsonart Field Elm (7999K-12) +$206J Wilsonart Grey Elm (8201K-12) +$206K Wilsonart Ebony Recon (7997-38) +$206M Wilsonart Frosty White (1573-60) +$206P Wilsonart Slate Grey (D91-60) +$206Q Wilsonart Portico Teak (8210K-28) +$206R Wilsonart Black (1595-60) +$206V Wilsonart River Cherry (7937-38) +$206W Wilsonart Designer White (D354-60) +$2063 Formica Neutral Twill (8826-58) +$2064 Formica Bleached Legno (8845-58) +$2067 Formica Select Cherry (7759-43) +$206X Wilsonart Non-Premium laminates (-38, -60) +$225Y Formica Non-Premium (includes 58, 43, +$250 MC, SP, and NT finishes), Formica Premium (WR, 42, 77, 46, RD finishes), Pionite Non-

Premium, Nevamar Non-Premium, Wilsonart Premium (-07, -12, -18, -28, -52, -78), and Formica 459-90 Brite White whiteboard laminate.


STEP 3 - for Peds with Laminate Fronts Only

(I) Integral(B) Bar (R) Rod

(A) Arc

Ordering Information:> Default Keying is random. See page 17 for Keyed-alike (no charge).> Lock cores are LL Series. UM Series lock cores are available upon request.> If ordering an additional laminate top for these products, contact [email protected].> A freight fee of $100 net is assessed on orders less than $1000 net. See page 13.

BEN

CH

ING

EN

VIR

ON

MEN

TSG

RID

(SIN 711-3)

GSA Price List V12 - Enwork · GSA Price List V12 Effective July 2, 2018 [email protected]...

Documents

Transcript of GSA Price List V12 - Enwork · GSA Price List V12 Effective July 2, 2018 [email protected]...