Grundfos NB 32-125.1/140 pump : NB32-125.1/140 A-F2-A-BAQE ... · 2000 2200 2400 2600 2800 P1 [kW]...
Transcript of Grundfos NB 32-125.1/140 pump : NB32-125.1/140 A-F2-A-BAQE ... · 2000 2200 2400 2600 2800 P1 [kW]...
GRUNDFOS DATA BOOKLET
NB32-125.1/140 A-F2-A-BAQE Grundfos pump 97839212
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/NB000/97839212/NB-32-125-1-140-A-F2-A-E-BAQE.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 NB 32-125.1/140 A-F2-A-E-BAQE
Product No.: On request
Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 withdimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensionsaccording to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft anda back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbingthe pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.The pump is close-coupled to a fan-cooled asynchronous motor.
Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
The back pull-out design means that the pump can be serviced by a single person without disturbingthe pump housing or pipe work.
Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.CED is a high-quality dip-painting process where an electrical field around the products ensuresdeposition of paint particles as a thin, well-controlled layer on the surface. An integral part of theprocess is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.
PumpThe pump housing has both a priming and a drain hole closed by plugs.The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller isstatically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate foraxial thrust.Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.
Motor stool and pump cover are made of cast iron (EN-GJL-250). Coupling guards are fitted to themotor stool. The pump cover is provided with a manual air vent screw for venting of the pump housingand the shaft seal chamber.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: carbon graphite, metal-impregnated• Stationary seat material: silicon carbide (SiC)
This material pairing has a very good corrosion resistance and is especially suitable for water up to 120°C. However, seal life will be reduced at temperatures above 90 °C. The material pairing is notrecommended for liquids containing particles as this will result in heavy wear on the SiC face.
1/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionSecondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 23.3 m³/hRated head: 22.4 mActual impeller diameter: 140 mmImpeller nom: 125.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-GJL-250ASTM A48-40 B
Impeller: Cast ironEN-GJL-200ASTM A48-30 B
Shaft: Stainless steel1.4301304
Rubber: EPDMWear ring mat.: High alloy brass(CuZn34Mn3AI2
Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16
Electrical data:Motor type: 90LCIE Efficiency class: IE3Rated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 7.70/4.45 AStarting current: 850-950 %Cos phi - power factor: 0.89-0.87Rated speed: 2890-2910 rpm
2/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionEfficiency: IE3 85,9%Motor efficiency at full load: 85.9 %Motor efficiency at 3/4 load: 86.8 %Motor efficiency at 1/2 load: 86.0 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FLubricant type: Grease
Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 46 kgGross weight: 56 kgShipping volume: 0.178 m³
3/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-125.1/140 A-F2-A-E-BAQE 50 HzH
[m]
0
5
10
15
20
25
30
Q [m³/h]0 2 4 6 8 10 12 14 16 18 20 22 24
eta[%]
0
20
40
60
80
100
NB 32-125.1/140, 3*400 V, 50Hz
140 mm
P[kW]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
NPSH[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
P1
P2
4/12
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0
5
10
15
20
25
30
Q [m³/h]0 5 10 15 20
eta[%]
0
20
40
60
80
100
NB 32-125.1/140, 3*400 V, 50Hz
140 mm
P[kW]
0.0
0.5
1.0
1.5
2.0
2.5
NPSH[m]
0.0
0.5
1.0
1.5
2.0
2.5P1
P2
4 x 19
4 x 19
50
80
226 321 100
110
32
140
112
5012
140
70
200
162
103
117 117
100 190
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Description ValueGeneral information:
Product name: NB 32-125.1/140A-F2-A-E-BAQE
Product No: On requestEAN number: On requestTechnical:Rated flow: 23.3 m³/hRated head: 22.4 mActual impeller diameter: 140 mmImpeller nom: 125.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONEShaft diameter: 24 mmCurve tolerance: ISO9906:2012 3BPump version: AMaterials:Pump housing: Cast iron
EN-GJL-250ASTM A48-40 B
Impeller: Cast ironEN-GJL-200ASTM A48-30 B
Shaft: Stainless steel1.4301304
Material code: ARubber: EPDMCode for rubber: E
Wear ring mat.: High alloybrass(CuZn34Mn3AI2
Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16Wear ring(s): neckring(s)Connect code: F2Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 90LCIE Efficiency class: IE3Rated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 7.70/4.45 AStarting current: 850-950 %Cos phi - power factor: 0.89-0.87Rated speed: 2890-2910 rpmEfficiency: IE3 85,9%Motor efficiency at full load: 85.9 %Motor efficiency at 3/4 load: 86.8 %Motor efficiency at 1/2 load: 86.0 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 87220292Mount. design. acc. IEC 34-7: IM V1/B5
4 x 19
4 x 19
8022632110032
5012
70
103
117117100190
5/12
Printed from Grundfos Product Centre [2018.06.003]
Description ValueLubricant type: GreaseOthers:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 46 kgGross weight: 56 kgShipping volume: 0.178 m³
6/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-125.1/140 A-F2-A-E-BAQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
I[A]
0
2
4
6
8
NB32-125.1/140 + 90LC 2.2 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
2000
2200
2400
2600
2800
P1[kW]
0.0
1.0
2.0
3.0
4.0
n
P1
7/12
Printed from Grundfos Product Centre [2018.06.003]
On request NB 32-125.1/140 A-F2-A-E-BAQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
4 x
19
4 x
1950
80
226
321
100
110
32
140 112
5012
140
70
200
162
103
117
117
100
190
8/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
9/12
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
10/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
11/12
Printed from Grundfos Product Centre [2018.06.003]
Parts list NB 32-125.1/140, Product No. On requestValid from 1.3.2011 (1109)
Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Nut 1 pcs
66 Washer 166a Spring lock washer 167 Nut Thread: M14 1
- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 29 Hex socket head cap screw Length (mm): 30 4
Thread: M1077a Pan head screw 4
- Pump housing cpl. 1 pcs6 Pump housing 136 Nut Thread: M10 6
- Stub shaft 1 pcs9 Socket set screw Length (mm): 6 2
Thread: M811 Parallel key Dimension: 6X6X35 151 Pump shaft 117 Air vent screw 1 pcs
- 20 Plug 1 pcs19 Pipe plug Thread: R 3/8 249 Impeller Outer diameter: 125 1 pcs72a O-ring Diameter: 177,39 1 pcs
Material type: EPDMThickness: 3,53
105 Shaft seal Material type: BAQE 1 pcs
12/12
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289