Grundfos Dosing Pumps & Accessories Price List October ... · PDF file1 SMART Digital Breaking...
Transcript of Grundfos Dosing Pumps & Accessories Price List October ... · PDF file1 SMART Digital Breaking...
1
SMART DigitalBreaking the barriers of dosing
Grundfos Dosing Pumps & AccessoriesPrice List October 2016
Category 5
PLEASE NOTE THE FOLLOWING FROM OUR TERMS AND CONDITIONS OF SALE: A copy of our full terms and conditions are available at the back of this price list
All prices are delivered at place (DAP) and subject to VAT at the standard rate. MINIMUM ORDER VALUE Our minimum order value is £55.00 NET. Orders between the minimum order value and the low order threshold of £335.00 NET for pumps or £130.00 NET for Category 4 items will be subject to a £37.00 NET handling fee.
EXPRESS OPTIONS ‐ DELIVERY CHARGES Grundfos offers choices for next day delivery. The following options are available: INTERSPEED (PER ITEM) (above 250 Kgs – subject to transport availability and an additional cost) • CR(I)(E), CRN(E) Vertical Multistage • Non‐stock SP/SPA models (with or without drop cable cut in 5 metre increments. Please note; Resin cable joint will take 24hrs to set) • Order must be received by 10.45am – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £69.00 NET (PER ITEM) BOXSPEED (PER ITEM) ‐ UK Stocked Items (above 250 Kgs – subject to transport availability and an additional cost) • ALPHA, UPS, UPN, UPS2 Circulators • Magna (D) Glandless Circulators • UP/UPS/Magna Replacement Heads/Terminal boxes (not stocked in the UK) • TPE(D), NB(E) Glanded • CM, CME Horizontal Multistage • JP, MQ, KP, CC and Tanks/Vessels (up to 500 Litre) • CMB(E), Boosters • AP, SL1, SLV, Unilift Waste Water Products • SQ, SQE, SB(A), SP2A, 3A & 5A >1.5kW (without drop cable) • Motors • Flanges & Unions • Pump Components •Chamber Stacks (not stocked in the UK) •Order must be received before 14.00pm – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £48.00 NET (PER ITEM) SPARESPEED (PER ITEM) •Only applies to spares kits •Order must be received before 14.00pm – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £36.00 NET (PER ITEM) *Deliveries to the Highlands and offshore UK may take 2 days. NOTE – Grundfos cannot accept any cancellations or amendments once the orders are received. All services are dependent on component or product availability. Grundfos can guarantee despatch or availability for collection same day but cannot guarantee delivery. Deliveries quoted are applicable for most areas in normal circumstance. SPARES STANDARD DELIVERY CHARGE •A £20.00 NET handling fee will be applied, per order, to all orders for spares, pump components, spares kits. •This charge does not apply if SPARESPEED, express service or our online ordering system (EDI), and/or Extranet are used for order placement. PRODUCT RETURNS FEE •On receipt of written agreement from Grundfos, items can be returned and will be subject to a minimum 35% restocking fee. Goods must be returned in their original packaging and within 6 months of date of despatch. All returns will be subject to inspection, to ascertain age, condition and product type and can incur an increased restocking charge. Please contact [email protected] with the original purchase order, to arrange collection. •Do not send items to Grundfos as they will be refused delivery, collection will be arranged. •Exclusions to Product Returns apply:‐ • Items with a NET value of £125.00 (per item) or less.
• Pump Repair Kits, Power Cable, Engineered to Order, 3rd party sourced and obsolete product cannot be returned for credit.
STORAGE CHARGE •There will be a 2% storage charge of the item invoice value, payable per month, commencing one month from the date the goods were available for delivery from Grundfos. WARRANTY PERIOD •Grundfos pumps are warranted for 24 months from installation or 30 months from manufacture; whichever is the sooner. • A Five Year Warranty covers manufacturing or material defects on domestic heating circulators (UPS2 and ALPHA2 series) purchased from 1st January 2014 (PC 1401). SERVICE AND COMMISSIONING Grundfos Service offers a full range of service, repair and commissioning. Please contact Grundfos Service directly on 01942 263628.
Contents
SMART Digital Dosing Pumps Dosing Pump Accessories2. Overview of functions 38. Hose
3. DDA‐AR analogue/pulse input, standard valves 39. Foot valves
4. DDA‐AR analogue/pulse input, spring loaded valves Rigid suction lances
5. DDA‐FC analogue/pulse input, standard valves 40.
6. DDA‐FC with flow control, spring loaded valves 41. Level control units
7. DDA‐FCM with flow control, standard valves Tank adaptors for suction lances and footvalves
8. DDA‐FCM with flow measurement, spring loaded valves Emission protection kits
9. Pressure valve for FC/FCM version pumps M‐12 plug adaptor
10. PROFIBUS E‐Box 150
MODBUS E‐Box 200 Injection fittingsPROFINET TCP communications and controllers 42. Injection units
11. Description Data points, Profibus, Modbus, Profinet Injection units for larger pumps
12. DDC‐AR analogue/pulse input, standard valves 43. Injection units for sodium hypochlorite
13. DDC‐AR analogue/pulse input, spring loaded valves Injection units with ball valve
14. DDC‐A pulse control, standard valves Withdrawable injection units
15. DDC‐A pulse control, spring loaded valves Hot‐injection units with ball valve
16. DDE‐PR pulse/relay control, standard valves
DDE‐PR pulse/relay control, spring loaded valves Multi‐function, pressure relief and loading valves17. DDE‐P pulse control, standard valves 44. Multi‐function valves (5/8" only)
DDE‐P pulse control, spring loaded valves Pressure relief valves
18. DDE‐B manual control, standard valves 45. Pressure relief valves for larger pumps
DDE‐B manual control, spring loaded valves Pressure loading valves
19. Installation kits for SMART dosing pumps Pressure loading valves for larger pumps
20. Cables and plugs 46. Pump connection kits
DME 60‐940 Digital Dosing Pumps 47. Inlay kit
21. Overview of functions 48. Threaded adaptors
22. DME‐AR analogue/pulse input, standard valves Union nut kits
23. DME‐AP PROFIBUS, standard valves 49. Union nut adaptors
24. DME‐B manual adjustment, standard valves Hose‐to‐hose and hose‐to‐pipe adaptors
25. Cables and plugs T‐pieces
Diaphragm leakage sensor 50. Suction side pulsation damper
Dosing monitor Manual vacuum pump as suction aid
DDI 60‐150 Digital Dosing Pumps Aeration and drain valves
26. Overview of functions 51. Discharge side pulsation dampers with diaphragm
27. DDI‐AR analogue/pulse input, standard valves Cross pieces
DDI‐AF flow monitor analogue/pulse input, standard valves 52. Accessories for pulsation dampers
28. DDI‐AP PROFIBUS, standard valves Water meter
DDI‐APF PROFIBUS, digital controls, standard valves
29. Cables and plugs Dosing Tanks and accessoriesDMX Mechanical Diaphragm Dosing Pumps 53. Dosing stations/tanksets and Dosing tanks
30. Technical Data and Options 54. Square tank, 100 litre
DMX 221 manual adjustment, 3 phase motor Catchment tray (bund)
31. DMX 221 manual adjustment, 1 phase motor Accessories for dosing tanks
DMX 221 with PTC thermistors suitable for inverter control Hand mixer
32. Technical Data and Options 55. Electric mixers, single phase motor
DMX 226 manual adjustment, 3 phase motor 56. Electric mixers, 3 phase motor
33. DMX 226 manual adjustment, 1 phase motor
DMX 226 with PTC thermistors suitable for inverter control
34. DMX 226 duplex head, manual adjustment, 3 phase motor
DMX 226 duplex head, manual adj, 3 PH with thermistors For further technical information please refer to the 35. DMX 227 standard, simplex and duplex versions relevant data booklet or technical information book for each item
DMH Piston Hydraulic Diaphragm Dosing Pumps36. Technical Data and Options The list of pumps is not exhaustive. We have further ranges of
DMH manual adjustment, 3 phase motor dosing pumps with the additional options37. continued ‐ larger capacities up to 8000 l/hours
‐ pressures up to 200 bar‐ different materials including Hastelloy and special coatings for very aggressive applications‐ many different motor variants‐ ATEX certified and API certified options
Other options are available, please contact your local sales office
Functions 2
Overview of functions SMART Digital Dosing Pumps DDA, DDC, DDE
Control variant: FCM FC AR AR A PR P B
General
Digital dosing: Internal stroke speed and frequency control
Mounting plate (basic / wall mounting)
Control Panel
Control cube mountable in three positions, front left, right
Control panel position: front‐fitted
Transparent protective cover for control elements
Capacity settings in millilitres, litres or US‐gallons
Plain‐text menu in different languages
Turn and push knob (click wheel) for easy navigation
Capacity adjustment knob (0.1‐100%)
Start / stop key
100% key (deaeration)
Operation mode switch (manual / pulse)
Operation modes
Manual speed control
Pulse control in ml/pulse
Pulse control (1:n)
Analogue control 0/4‐20 mA
Batch control (pulse‐based)
Dosing timer control
Dosing timer week
Fieldbus control
Functions
Auto deaeration also during pump standby
Flow control system with selective fault diagnosis
Pressure monitoring (min/max)
Flow measurement
Auto flow adapt
Slow mode (anti cavitation)
Calibration mode
Scaling of analogue input
Service information display
Relay setting: alarm, warning, stroke signal, pump dosing, pulse input*
Relay setting (in addition): timer cycle, timer week
Inputs/outputs
Inputs for external stop
Input for pulse control
Input for analogue 0/4‐20 mA control
Input for low‐level signal
Input for empty tank signal
Output relay (2 relays)
output analogue 0/4‐20 mA
Input / Output for GeniBus
Input / Output for E‐box (Profibus DP or additional alarm relays)
* DDE‐PR: relay 1: alarm; relay 2: low level signal, stroke signal, pulse input
Graphical display with background light in four colours for status
indication: white, green, yellow, red
DDA, standard range 3Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: AR versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 AR‐PP/E/C‐F‐31U2U2FG 97721938 1,271
yes DDA 7.5‐16 AR‐PP/E/C‐F‐31I001FG 97721939 1,351
no DDA 7.5‐16 AR‐PP/V/C‐F‐31U2U2FG 97721942 1,271
yes DDA 7.5‐16 AR‐PP/V/C‐F‐31I001FG 97721943 1,351
no DDA 7.5‐16 AR‐PVC/E/C‐F‐31U2U2FG 97721946 1,297
yes DDA 7.5‐16 AR‐PVC/E/C‐F‐31I001FG 97721947 1,377
no DDA 7.5‐16 AR‐PVC/V/C‐F‐31U2U2FG 97721950 1,297
yes DDA 7.5‐16 AR‐PVC/V/C‐F‐31I001FG 97721951 1,377
no DDA 7.5‐16 AR‐PV/T/C‐F‐31U2U2FG 97721966 1,478
yes DDA 7.5‐16 AR‐PV/T/C‐F‐31I001FG 97721967 1,557
SS PTFE SS 1.4401 no DDA 7.5‐16 AR‐SS/T/SS‐F‐31AAFG 97721970 1,993
no DDA 12‐10 AR‐PP/E/C‐F‐31U2U2FG 97722040 1,440
yes DDA 12‐10 AR‐PP/E/C‐F‐31I002FG 97722041 1,538
no DDA 12‐10 AR‐PP/V/C‐F‐31U2U2FG 97722044 1,440
yes DDA 12‐10 AR‐PP/V/C‐F‐31I002FG 97722045 1,538
no DDA 12‐10 AR‐PVC/E/C‐F‐31U2U2FG 97722048 1,467
yes DDA 12‐10 AR‐PVC/E/C‐F‐31I002FG 97722049 1,564
no DDA 12‐10 AR‐PVC/V/C‐F‐31U2U2FG 97722052 1,467
yes DDA 12‐10 AR‐PVC/V/C‐F‐31I002FG 97722053 1,564
no DDA 12‐10 AR‐PV/T/C‐F‐31U2U2FG 97722068 1,646
yes DDA 12‐10 AR‐PV/T/C‐F‐31I002FG 97722069 1,744
SS PTFE SS 1.4401 no DDA 12‐10 AR‐SS/T/SS‐F‐31AAFG 97722072 2,162
no DDA 17‐7 AR‐PP/E/C‐F‐31U2U2FG 97722142 1,440
yes DDA 17‐7 AR‐PP/E/C‐F‐31I002FG 97722143 1,538
no DDA 17‐7 AR‐PP/V/C‐F‐31U2U2FG 97722146 1,440
yes DDA 17‐7 AR‐PP/V/C‐F‐31I002FG 97722147 1,538
no DDA 17‐7 AR‐PVC/E/C‐F‐31U2U2FG 97722150 1,467
yes DDA 17‐7 AR‐PVC/E/C‐F‐31I002FG 97722151 1,564
no DDA 17‐7 AR‐PVC/V/C‐F‐31U2U2FG 97722154 1,467
yes DDA 17‐7 AR‐PVC/V/C‐F‐31I002FG 97722155 1,564
no DDA 17‐7 AR‐PV/T/C‐F‐31U2U2FG 97722170 1,646
yes DDA 17‐7 AR‐PV/T/C‐F‐31I002FG 97722171 1,744
SS PTFE SS 1.4401 no DDA 17‐7 AR‐SS/T/SS‐F‐31AAFG 97722174 2,162
no DDA 30‐4 AR‐PP/E/C‐F‐31U2U2FG 97722244 1,582
yes DDA 30‐4 AR‐PP/E/C‐F‐31I002FG 97722245 1,680
no DDA 30‐4 AR‐PP/V/C‐F‐31U2U2FG 97722248 1,582
yes DDA 30‐4 AR‐PP/V/C‐F‐31I002FG 97722249 1,680
no DDA 30‐4 AR‐PVC/E/C‐F‐31U2U2FG 97722252 1,609
yes DDA 30‐4 AR‐PVC/E/C‐F‐31I002FG 97722253 1,706
no DDA 30‐4 AR‐PVC/V/C‐F‐31U2U2FG 97722256 1,609
yes DDA 30‐4 AR‐PVC/V/C‐F‐31I002FG 97722257 1,706
Ceramic no DDA 30‐4 AR‐PV/T/C‐F‐31U2U2FG 97722272 1,789
yes DDA 30‐4 AR‐PV/T/C‐F‐31I002FG 97722273 1,886
SS PTFE SS 1.4401 no DDA 30‐4 AR‐SS/T/SS‐F‐31AAFG 97722276 2,304
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
PP
PVC*** (10
bar max)
7.5 16
PVDF
EPDM Ceramic
EPDM Ceramic
PP
EPDM
FKM
PVC
CeramicPTFEPVDF
10
CeramicFKM
EPDM Ceramic
EPDM Ceramic
PVDF
FKM Ceramic
12PVC
PP
CeramicFKM
FKM Ceramic
PTFE Ceramic
30 4
PP
PVC
PVDF
EPDM
FKM
Ceramic
Ceramic
EPDM
FKM
Ceramic
Ceramic
EPDM
FKM
PTFE
Ceramic
Ceramic
Ceramic
Ceramic
CeramicPTFE
17 7
DDA, standard range 4Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Spring loadedControls: AR versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 AR‐PP/E/C‐F‐32U2U2FG 97721940 1,289
yes DDA 7.5‐16 AR‐PP/E/C‐F‐32I001FG 97721941 1,368
no DDA 7.5‐16 AR‐PP/V/C‐F‐32U2U2FG 97721944 1,289
yes DDA 7.5‐16 AR‐PP/V/C‐F‐32I001FG 97721945 1,368
no DDA 7.5‐16 AR‐PVC/E/C‐F‐32U2U2FG 97721948 1,316
yes DDA 7.5‐16 AR‐PVC/E/C‐F‐32I001FG 97721949 1,396
no DDA 7.5‐16 AR‐PVC/V/C‐F‐32U2U2FG 97721952 1,316
yes DDA 7.5‐16 AR‐PVC/V/C‐F‐32I001FG 97721953 1,396
no DDA 7.5‐16 AR‐PV/T/C‐F‐32U2U2FG 97721968 1,495
yes DDA 7.5‐16 AR‐PV/T/C‐F‐32I001FG 97721969 1,575
SS PTFE SS 1.4401 no DDA 7.5‐16 AR‐SS/T/SS‐F‐32AAFG 97721971 2,011
no DDA 12‐10 AR‐PP/E/C‐F‐32U2U2FG 97722042 1,458
yes DDA 12‐10 AR‐PP/E/C‐F‐32I002FG 97722043 1,555
no DDA 12‐10 AR‐PP/V/C‐F‐32U2U2FG 97722046 1,458
yes DDA 12‐10 AR‐PP/V/C‐F‐32I002FG 97722047 1,555
no DDA 12‐10 AR‐PVC/E/C‐F‐32U2U2FG 97722050 1,484
yes DDA 12‐10 AR‐PVC/E/C‐F‐32I002FG 97722051 1,582
no DDA 12‐10 AR‐PVC/V/C‐F‐32U2U2FG 97722054 1,484
yes DDA 12‐10 AR‐PVC/V/C‐F‐32I002FG 97722055 1,582
no DDA 12‐10 AR‐PV/T/C‐F‐32U2U2FG 97722070 1,664
yes DDA 12‐10 AR‐PV/T/C‐F‐32I002FG 97722071 1,762
SS PTFE SS 1.4401 no DDA 12‐10 AR‐SS/T/SS‐F‐32AAFG 97722073 2,179
no DDA 17‐7 AR‐PP/E/C‐F‐32U2U2FG 97722144 1,458
yes DDA 17‐7 AR‐PP/E/C‐F‐32I002FG 97722145 1,555
no DDA 17‐7 AR‐PP/V/C‐F‐32U2U2FG 97722148 1,458
yes DDA 17‐7 AR‐PP/V/C‐F‐32I002FG 97722149 1,555
no DDA 17‐7 AR‐PVC/E/C‐F‐32U2U2FG 97722152 1,484
yes DDA 17‐7 AR‐PVC/E/C‐F‐32I002FG 97722153 1,582
no DDA 17‐7 AR‐PVC/V/C‐F‐32U2U2FG 97722156 1,484
yes DDA 17‐7 AR‐PVC/V/C‐F‐32I002FG 97722157 1,582
no DDA 17‐7 AR‐PV/T/C‐F‐32U2U2FG 97722172 1,664
yes DDA 17‐7 AR‐PV/T/C‐F‐32I002FG 97722173 1,762
SS PTFE SS 1.4401 no DDA 17‐7 AR‐SS/T/SS‐F‐32AAFG 97722175 2,179
no DDA 30‐4 AR‐PP/E/C‐F‐32U2U2FG 97722246 1,600
yes DDA 30‐4 AR‐PP/E/C‐F‐32I002FG 97722247 1,697
no DDA 30‐4 AR‐PP/V/C‐F‐32U2U2FG 97722250 1,600
yes DDA 30‐4 AR‐PP/V/C‐F‐32I002FG 97722251 1,697
no DDA 30‐4 AR‐PVC/E/C‐F‐32U2U2FG 97722254 1,626
yes DDA 30‐4 AR‐PVC/E/C‐F‐32I002FG 97722255 1,724
no DDA 30‐4 AR‐PVC/V/C‐F‐32U2U2FG 97722258 1,626
yes DDA 30‐4 AR‐PVC/V/C‐F‐32I002FG 97722259 1,724
Ceramic no DDA 30‐4 AR‐PV/T/C‐F‐32U2U2FG 97722274 1,807
yes DDA 30‐4 AR‐PV/T/C‐F‐32I002FG 97722275 1,904
SS PTFE SS 1.4401 no DDA 30‐4 AR‐SS/T/SS‐F‐32AAFG 97722277 2,322
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
FKM Ceramic
PVDF PTFE Ceramic
FKM Ceramic
PVDF PTFE
10
PP
EPDM Ceramic
7.5 16
PP
EPDM Ceramic
FKM Ceramic
PVC*** (10
bar max)
EPDM Ceramic
CeramicPTFE
17 7
PP
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF
12
30 4
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
DDA, standard range 5Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: FC versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 FC‐PP/E/C‐F‐31U2U2FG 97721972 1,585
yes DDA 7.5‐16 FC‐PP/E/C‐F‐31I001FG 97721973 1,664
no DDA 7.5‐16 FC‐PP/V/C‐F‐31U2U2FG 97721976 1,585
yes DDA 7.5‐16 FC‐PP/V/C‐F‐31I001FG 97721977 1,664
no DDA 7.5‐16 FC‐PVC/E/C‐F‐31U2U2FG 97721980 1,611
yes DDA 7.5‐16 FC‐PVC/E/C‐F‐31I001FG 97721981 1,691
no DDA 7.5‐16 FC‐PVC/V/C‐F‐31U2U2FG 97721984 1,611
yes DDA 7.5‐16 FC‐PVC/V/C‐F‐31I001FG 97721985 1,691
no DDA 7.5‐16 FC‐PV/T/C‐F‐31U2U2FG 97722000 1,791
yes DDA 7.5‐16 FC‐PV/T/C‐F‐31I001FG 97722001 1,871
SS PTFE SS 1.4401 no DDA 7.5‐16 FC‐SS/T/SS‐F‐31AAFG 97722004 2,306
no DDA 12‐10 FC‐PP/E/C‐F‐31U2U2FG 97722074 1,753
yes DDA 12‐10 FC‐PP/E/C‐F‐31I002FG 97722075 1,850
no DDA 12‐10 FC‐PP/V/C‐F‐31U2U2FG 97722078 1,753
yes DDA 12‐10 FC‐PP/V/C‐F‐31I002FG 97722079 1,850
no DDA 12‐10 FC‐PVC/E/C‐F‐31U2U2FG 97722082 1,779
yes DDA 12‐10 FC‐PVC/E/C‐F‐31I002FG 97722083 1,878
no DDA 12‐10 FC‐PVC/V/C‐F‐31U2U2FG 97722086 1,779
yes DDA 12‐10 FC‐PVC/V/C‐F‐31I002FG 97722087 1,878
no DDA 12‐10 FC‐PV/T/C‐F‐31U2U2FG 97722102 1,960
yes DDA 12‐10 FC‐PV/T/C‐F‐31I002FG 97722103 2,058
SS PTFE SS 1.4401 no DDA 12‐10 FC‐SS/T/SS‐F‐31AAFG 97722106 2,475
no DDA 17‐7 FC‐PP/E/C‐F‐31U2U2FG 97722176 1,753
yes DDA 17‐7 FC‐PP/E/C‐F‐31I002FG 97722177 1,850
no DDA 17‐7 FC‐PP/V/C‐F‐31U2U2FG 97722180 1,753
yes DDA 17‐7 FC‐PP/V/C‐F‐31I002FG 97722181 1,850
no DDA 17‐7 FC‐PVC/E/C‐F‐31U2U2FG 97722184 1,779
yes DDA 17‐7 FC‐PVC/E/C‐F‐31I002FG 97722185 1,878
no DDA 17‐7 FC‐PVC/V/C‐F‐31U2U2FG 97722188 1,779
yes DDA 17‐7 FC‐PVC/V/C‐F‐31I002FG 97722189 1,878
no DDA 17‐7 FC‐PV/T/C‐F‐31U2U2FG 97722204 1,960
yes DDA 17‐7 FC‐PV/T/C‐F‐31I002FG 97722205 2,058
SS PTFE SS 1.4401 no DDA 17‐7 FC‐SS/T/SS‐F‐31AAFG 97722208 2,475
no DDA 30‐4 FC‐PP/E/C‐F‐31U2U2FG 97722278 1,895
yes DDA 30‐4 FC‐PP/E/C‐F‐31I002FG 97722279 1,993
no DDA 30‐4 FC‐PP/V/C‐F‐31U2U2FG 97722282 1,895
yes DDA 30‐4 FC‐PP/V/C‐F‐31I002FG 97722283 1,993
no DDA 30‐4 FC‐PVC/E/C‐F‐31U2U2FG 97722286 1,922
yes DDA 30‐4 FC‐PVC/E/C‐F‐31I002FG 97722288 2,020
no DDA 30‐4 FC‐PVC/V/C‐F‐31U2U2FG 97722291 1,922
yes DDA 30‐4 FC‐PVC/V/C‐F‐31I002FG 97722292 2,020
Ceramic no DDA 30‐4 FC‐PV/T/C‐F‐31U2U2FG 97722307 2,102
yes DDA 30‐4 FC‐PV/T/C‐F‐31I002FG 97722308 2,200
SS PTFE SS 1.4401 no DDA 30‐4 FC‐SS/T/SS‐F‐31AAFG 97722311 2,618
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
7.5 16
PP
EPDM Ceramic
FKM
12 10
PP
EPDM Ceramic
FKM Ceramic
Ceramic
PVC*** (10
bar max)
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE Ceramic
30 4
PP
EPDM Ceramic
17 7
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE
DDA, standard range 6Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Spring loadedControls: FC versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 FC‐PP/E/C‐F‐32U2U2FG 97721974 1,602
yes DDA 7.5‐16 FC‐PP/E/C‐F‐32I001FG 97721975 1,682
no DDA 7.5‐16 FC‐PP/V/C‐F‐32U2U2FG 97721978 1,602
yes DDA 7.5‐16 FC‐PP/V/C‐F‐32I001FG 97721979 1,682
no DDA 7.5‐16 FC‐PVC/E/C‐F‐32U2U2FG 97721982 1,629
yes DDA 7.5‐16 FC‐PVC/E/C‐F‐32I001FG 97721983 1,708
no DDA 7.5‐16 FC‐PVC/V/C‐F‐32U2U2FG 97721986 1,629
yes DDA 7.5‐16 FC‐PVC/V/C‐F‐32I001FG 97721987 1,708
no DDA 7.5‐16 FC‐PV/T/C‐F‐32U2U2FG 97722002 1,809
yes DDA 7.5‐16 FC‐PV/T/C‐F‐32I001FG 97722003 1,889
SS PTFE SS 1.4401 no DDA 7.5‐16 FC‐SS/T/SS‐F‐32AAFG 97722005 2,324
no DDA 12‐10 FC‐PP/E/C‐F‐32U2U2FG 97722076 1,771
yes DDA 12‐10 FC‐PP/E/C‐F‐32I002FG 97722077 1,869
no DDA 12‐10 FC‐PP/V/C‐F‐32U2U2FG 97722080 1,771
yes DDA 12‐10 FC‐PP/V/C‐F‐32I002FG 97722081 1,869
no DDA 12‐10 FC‐PVC/E/C‐F‐32U2U2FG 97722084 1,798
yes DDA 12‐10 FC‐PVC/E/C‐F‐32I002FG 97722085 1,895
no DDA 12‐10 FC‐PVC/V/C‐F‐32U2U2FG 97722088 1,798
yes DDA 12‐10 FC‐PVC/V/C‐F‐32I002FG 97722089 1,895
no DDA 12‐10 FC‐PV/T/C‐F‐32U2U2FG 97722104 1,977
yes DDA 12‐10 FC‐PV/T/C‐F‐32I002FG 97722105 2,075
SS PTFE SS 1.4401 no DDA 12‐10 FC‐SS/T/SS‐F‐32AAFG 97722107 2,493
no DDA 17‐7 FC‐PP/E/C‐F‐32U2U2FG 97722178 1,771
yes DDA 17‐7 FC‐PP/E/C‐F‐32I002FG 97722179 1,869
no DDA 17‐7 FC‐PP/V/C‐F‐32U2U2FG 97722182 1,771
yes DDA 17‐7 FC‐PP/V/C‐F‐32I002FG 97722183 1,869
no DDA 17‐7 FC‐PVC/E/C‐F‐32U2U2FG 97722186 1,798
yes DDA 17‐7 FC‐PVC/E/C‐F‐32I002FG 97722187 1,895
no DDA 17‐7 FC‐PVC/V/C‐F‐32U2U2FG 97722190 1,798
yes DDA 17‐7 FC‐PVC/V/C‐F‐32I002FG 97722191 1,895
no DDA 17‐7 FC‐PV/T/C‐F‐32U2U2FG 97722206 1,977
yes DDA 17‐7 FC‐PV/T/C‐F‐32I002FG 97722207 2,075
SS PTFE SS 1.4401 no DDA 17‐7 FC‐SS/T/SS‐F‐32AAFG 97722209 2,493
no DDA 30‐4 FC‐PP/E/C‐F‐32U2U2FG 97722280 1,913
yes DDA 30‐4 FC‐PP/E/C‐F‐32I002FG 97722281 2,011
no DDA 30‐4 FC‐PP/V/C‐F‐32U2U2FG 97722284 1,913
yes DDA 30‐4 FC‐PP/V/C‐F‐32I002FG 97722285 2,011
no DDA 30‐4 FC‐PVC/E/C‐F‐32U2U2FG 97722289 1,940
yes DDA 30‐4 FC‐PVC/E/C‐F‐32I002FG 97722290 2,037
no DDA 30‐4 FC‐PVC/V/C‐F‐32U2U2FG 97722293 1,940
yes DDA 30‐4 FC‐PVC/V/C‐F‐32I002FG 97722294 2,037
Ceramic no DDA 30‐4 FC‐PV/T/C‐F‐32U2U2FG 97722309 2,119
yes DDA 30‐4 FC‐PV/T/C‐F‐32I002FG 97722310 2,218
SS PTFE SS 1.4401 no DDA 30‐4 FC‐SS/T/SS‐F‐32AAFG 97722312 2,635
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
Ceramic
FKM Ceramic
PVC*** (10
bar max)
EPDM Ceramic
FKM Ceramic
PP
EPDM
Ceramic
FKM Ceramic
PVDF PTFE Ceramic
Ceramic
12 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM
7.5 16
PVDF PTFE
30 4
PP
EPDM Ceramic
17 7
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE
DDA, standard range 7Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: FCM versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 FCM‐PP/E/C‐F‐31U2U2FG 97722006 1,858
yes DDA 7.5‐16 FCM‐PP/E/C‐F‐31I001FG 97722007 1,938
no DDA 7.5‐16 FCM‐PP/V/C‐F‐31U2U2FG 97722010 1,858
yes DDA 7.5‐16 FCM‐PP/V/C‐F‐31I001FG 97722011 1,938
no DDA 7.5‐16 FCM‐PVC/E/C‐F‐31U2U2FG 97722014 1,884
yes DDA 7.5‐16 FCM‐PVC/E/C‐F‐31I001FG 97722015 1,964
no DDA 7.5‐16 FCM‐PVC/V/C‐F‐31U2U2FG 97722018 1,884
yes DDA 7.5‐16 FCM‐PVC/V/C‐F‐31I001FG 97722019 1,964
no DDA 7.5‐16 FCM‐PV/T/C‐F‐31U2U2FG 97722034 2,064
yes DDA 7.5‐16 FCM‐PV/T/C‐F‐31I001FG 97722035 2,144
SS PTFE SS 1.4401 no DDA 7.5‐16 FCM‐SS/T/SS‐F‐31AAFG 97722038 2,579
no DDA 12‐10 FCM‐PP/E/C‐F‐31U2U2FG 97722108 2,026
yes DDA 12‐10 FCM‐PP/E/C‐F‐31I002FG 97722109 2,124
no DDA 12‐10 FCM‐PP/V/C‐F‐31U2U2FG 97722112 2,026
yes DDA 12‐10 FCM‐PP/V/C‐F‐31I002FG 97722113 2,124
no DDA 12‐10 FCM‐PVC/E/C‐F‐31U2U2FG 97722116 2,053
yes DDA 12‐10 FCM‐PVC/E/C‐F‐31I002FG 97722117 2,151
no DDA 12‐10 FCM‐PVC/V/C‐F‐31U2U2FG 97722120 2,053
yes DDA 12‐10 FCM‐PVC/V/C‐F‐31I002FG 97722121 2,151
no DDA 12‐10 FCM‐PV/T/C‐F‐31U2U2FG 97722136 2,233
yes DDA 12‐10 FCM‐PV/T/C‐F‐31I002FG 97722137 2,331
SS PTFE SS 1.4401 no DDA 12‐10 FCM‐SS/T/SS‐F‐31AAFG 97722140 2,749
no DDA 17‐7 FCM‐PP/E/C‐F‐31U2U2FG 97722210 2,026
yes DDA 17‐7 FCM‐PP/E/C‐F‐31I002FG 97722211 2,124
no DDA 17‐7 FCM‐PP/V/C‐F‐31U2U2FG 97722214 2,026
yes DDA 17‐7 FCM‐PP/V/C‐F‐31I002FG 97722215 2,124
no DDA 17‐7 FCM‐PVC/E/C‐F‐31U2U2FG 97722218 2,053
yes DDA 17‐7 FCM‐PVC/E/C‐F‐31I002FG 97722219 2,151
no DDA 17‐7 FCM‐PVC/V/C‐F‐31U2U2FG 97722222 2,053
yes DDA 17‐7 FCM‐PVC/V/C‐F‐31I002FG 97722223 2,151
no DDA 17‐7 FCM‐PV/T/C‐F‐31U2U2FG 97722238 2,233
yes DDA 17‐7 FCM‐PV/T/C‐F‐31I002FG 97722239 2,331
SS PTFE SS 1.4401 no DDA 17‐7 FCM‐SS/T/SS‐F‐31AAFG 97722242 2,749
no DDA 30‐4 FCM‐PP/E/C‐F‐31U2U2FG 97722313 2,168
yes DDA 30‐4 FCM‐PP/E/C‐F‐31I002FG 97722314 2,267
no DDA 30‐4 FCM‐PP/V/C‐F‐31U2U2FG 97722317 2,168
yes DDA 30‐4 FCM‐PP/V/C‐F‐31I002FG 97722318 2,267
no DDA 30‐4 FCM‐PVC/E/C‐F‐31U2U2FG 97722331 2,196
yes DDA 30‐4 FCM‐PVC/E/C‐F‐31I002FG 97722332 2,293
no DDA 30‐4 FCM‐PVC/V/C‐F‐31U2U2FG 97722335 2,196
yes DDA 30‐4 FCM‐PVC/V/C‐F‐31I002FG 97722336 2,293
Ceramic no DDA 30‐4 FCM‐PV/T/C‐F‐31U2U2FG 97722351 2,375
yes DDA 30‐4 FCM‐PV/T/C‐F‐31I002FG 97722352 2,473
SS PTFE SS 1.4401 no DDA 30‐4 FCM‐SS/T/SS‐F‐31AAFG 97722355 2,891
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
Ceramic
FKM Ceramic
PVC*** (10
bar max)
EPDM Ceramic
FKM Ceramic
PP
EPDM
Ceramic
FKM Ceramic
PVDF PTFE Ceramic
Ceramic
12 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM
7.5 16
PVDF PTFE
FKM Ceramic
PVDF PTFE Ceramic
PP
EPDM Ceramic
17 7
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE
30 4
DDA, standard range 8Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Spring loadedControls: FCM versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDA 7.5‐16 FCM‐PP/E/C‐F‐32U2U2FG 97722008 1,875
yes DDA 7.5‐16 FCM‐PP/E/C‐F‐32I001FG 97722009 1,955
no DDA 7.5‐16 FCM‐PP/V/C‐F‐32U2U2FG 97722012 1,875
yes DDA 7.5‐16 FCM‐PP/V/C‐F‐32I001FG 97722013 1,955
no DDA 7.5‐16 FCM‐PVC/E/C‐F‐32U2U2FG 97722016 1,902
yes DDA 7.5‐16 FCM‐PVC/E/C‐F‐32I001FG 97722017 1,982
no DDA 7.5‐16 FCM‐PVC/V/C‐F‐32U2U2FG 97722020 1,902
yes DDA 7.5‐16 FCM‐PVC/V/C‐F‐32I001FG 97722021 1,982
no DDA 7.5‐16 FCM‐PV/T/C‐F‐32U2U2FG 97722036 2,082
yes DDA 7.5‐16 FCM‐PV/T/C‐F‐32I001FG 97722037 2,162
SS PTFE SS 1.4401 no DDA 7.5‐16 FCM‐SS/T/SS‐F‐32AAFG 97722039 2,598
no DDA 12‐10 FCM‐PP/E/C‐F‐32U2U2FG 97722110 2,044
yes DDA 12‐10 FCM‐PP/E/C‐F‐32I002FG 97722111 2,142
no DDA 12‐10 FCM‐PP/V/C‐F‐32U2U2FG 97722114 2,044
yes DDA 12‐10 FCM‐PP/V/C‐F‐32I002FG 97722115 2,142
no DDA 12‐10 FCM‐PVC/E/C‐F‐32U2U2FG 97722118 2,071
yes DDA 12‐10 FCM‐PVC/E/C‐F‐32I002FG 97722119 2,168
no DDA 12‐10 FCM‐PVC/V/C‐F‐32U2U2FG 97722122 2,071
yes DDA 12‐10 FCM‐PVC/V/C‐F‐32I002FG 97722123 2,168
no DDA 12‐10 FCM‐PV/T/C‐F‐32U2U2FG 97722138 2,250
yes DDA 12‐10 FCM‐PV/T/C‐F‐32I002FG 97722139 2,349
SS PTFE SS 1.4401 no DDA 12‐10 FCM‐SS/T/SS‐F‐32AAFG 97722141 2,766
no DDA 17‐7 FCM‐PP/E/C‐F‐32U2U2FG 97722212 2,044
yes DDA 17‐7 FCM‐PP/E/C‐F‐32I002FG 97722213 2,142
no DDA 17‐7 FCM‐PP/V/C‐F‐32U2U2FG 97722216 2,044
yes DDA 17‐7 FCM‐PP/V/C‐F‐32I002FG 97722217 2,142
no DDA 17‐7 FCM‐PVC/E/C‐F‐32U2U2FG 97722220 2,071
yes DDA 17‐7 FCM‐PVC/E/C‐F‐32I002FG 97722221 2,168
no DDA 17‐7 FCM‐PVC/V/C‐F‐32U2U2FG 97722224 2,071
yes DDA 17‐7 FCM‐PVC/V/C‐F‐32I002FG 97722225 2,168
no DDA 17‐7 FCM‐PV/T/C‐F‐32U2U2FG 97722240 2,250
yes DDA 17‐7 FCM‐PV/T/C‐F‐32I002FG 97722241 2,349
SS PTFE SS 1.4401 no DDA 17‐7 FCM‐SS/T/SS‐F‐32AAFG 97722243 2,766
no DDA 30‐4 FCM‐PP/E/C‐F‐32U2U2FG 97722315 2,186
yes DDA 30‐4 FCM‐PP/E/C‐F‐32I002FG 97722316 2,284
no DDA 30‐4 FCM‐PP/V/C‐F‐32U2U2FG 97722319 2,186
yes DDA 30‐4 FCM‐PP/V/C‐F‐32I002FG 97722320 2,284
no DDA 30‐4 FCM‐PVC/E/C‐F‐32U2U2FG 97722333 2,213
yes DDA 30‐4 FCM‐PVC/E/C‐F‐32I002FG 97722334 2,311
no DDA 30‐4 FCM‐PVC/V/C‐F‐32U2U2FG 97722337 2,213
yes DDA 30‐4 FCM‐PVC/V/C‐F‐32I002FG 97722338 2,311
Ceramic no DDA 30‐4 FCM‐PV/T/C‐F‐32U2U2FG 97722353 2,393
yes DDA 30‐4 FCM‐PV/T/C‐F‐32I002FG 97722354 2,491
SS PTFE SS 1.4401 no DDA 30‐4 FCM‐SS/T/SS‐F‐32AAFG 97722356 2,908
*** PVC dosing heads only up to 10 bar
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
Ceramic
Ceramic
Ceramic
Ceramic
EPDM Ceramic
FKM Ceramic
7.5 16
PP
EPDM
FKM
PVC*** (10
bar max)
EPDM
FKM
PVDF PTFE Ceramic
PVDF PTFE Ceramic
17 7
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
12 10
PP
EPDM Ceramic
FKM Ceramic
PVC
Ceramic
PVC
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PP
EPDM Ceramic
FKM
30 4
PVDF PTFE
Pressure valves 9
Material
FKM 95730325 68
EPDM 95730326 68
FKM 95730327 68
EPDM 95730328 68
PTFE 95730329 94
FKM 95730330 105
EPDM 95730331 105
PTFE 95730332 131
PTFE 95730333 209
Price
60Ceramic
PP
PVC
PVDF
Stainless steel Stainless steel
Pressure valves provide a constant back pressure of 3 bar. They are particularly required for SMART DDA‐FC or DDA‐FCM
pumps at very small flow rates. Pressure valves are installed either directly on the pump discharge side, or on the
pressure relief valve. Loading pressure 3 bar, not adjustable. Maximum system pressure 16 bar. Spring material: Alloy C‐4
(NiMo16CrTi, material number 2.4610). No connections included.
Max.
flow rate
[l/h]
Ball Housing materialProduct
number
E‐boxes and CIU controllers 10
The CIU control modules and E‐boxes can be connected (added on or retrofitted) to the DDA dosing pump after installation (version 2.5)
Suitable for harsh environments due to IP65 enclosures and cable inputs
Supported dosing pumps: SMART Digital DDA with control variants FCM, FC or AR
Advantages:
Remote monitoring and setup of SMART Digital DDA dosing pumps
Better input signal = higher accurate dosing flow adjustment
Plain text error messages using the Flow Control System (FC and FCM version)
Compact design through clickable E‐Box, retrofittable
The CIU communication modules can also be retrofitted
Technical Data:
Profibus communications (E‐Box 150)Protocol Profibus DP E‐Box (between pump and click plate)
Implementation class DP‐V0
Transmission rate 9600 bit/sec to 12 Mbit/sec
Profibus slave address 1‐126, set up at the DDA display
Modbus RTU communication (E‐Box 200)Protocol Modbus RTU
Transceiver RS‐485
Transmission rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 kbits/sec
Slave address 1‐247, setup at the DDA display
PROFINET or Modbus TCP communications (CIU 500)Protocol PROFINET IO
Modbus TCP (selectable rotary switch) External CIU Box
Transmission rate 10/100 Mbits/s
Ports 2 x RJ45
PROFINET Conformance class B
Description Product Price
numberE‐box 150 Profibus‐DP 97513994 379
External controller, CIU150 96753081 373
E‐box 200 Modbus RTU, Modbus TCP / Profinet IO 98563350 379
External controller, CIU200 Modbus RTU 96753082 331
External controller, CIU500 Modbus TCP / Profinet IO 96753894 528
External controller, CIU271 Grundfos Remote Management 96898819 663
Connection Cable Genibus connection cable, 3 m M12 straight connector 98589048 52
PC‐tool link Service tool (need also Genibus connection cable) 98589048 52
See next page for data pointsFurther information: http:/www.grundfos.com/products/find‐product/grm.html
Data points, Profibus, Modbus, Profinet 11
FCM FC AR
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X
X X
Control Mode Status
Alarm/warning/dosing (running) Status
Actual Manual Flow Setpoint
Actual Pulse Volume Setting
Actual Batch Dosing Volume Setting
Actual Batch Dosing Time Setting
Control
X X
Measured Data
Operating Mode (Start, Stop, Service, Calibrating)
Functions (Slow mode, Viscosity selection), Deaerating mode
Function Enable/Disable (AutoDearating, FlowMonitor
Profibus Watchdog, AutoFlow, PulseMemory
Pulse signal from bus
Reset Fault and Volume Counter
Control Mode (Manual, Pulse, Analogue, Timer, Batch)
Set Manual Flow Setpoint
Set Pulse Volume
Set Batch Volume
Set Batch Dosing Time
Set Flow Monitor Pressure Alarm Limit
Relay Control of Relay 1 and 2
Set Analog Output
Set Date & Time
StatusOperating Mode Status
Digital Inputs
Analog Input Signal
Pulse Input Frequency
Measured Dosing Capacity
Measured Dosing Pressure
X
Total Dosed Volume
Volume Trip Counter
Actual Analog Output Signal
Digital Outputs
Number Of Starts
Run Time
Total On Time
Stroke Counter
Time To Next Dosing
Actual Flow Monitor Pressure Alarm Limit Setting
Control Source ( HMI, External, Bus)
Fault & Warning Code
Warning Status Bits
Actual Date & Time
Max Dosing Pressure
Max Dosing Capacity
Resulting Dosing Capacity Setpoint
Remaining Dosing Volume
DDC, standard range 12Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: AR versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDC 6‐10 AR‐PP/E/C‐F‐31U2U2FG 97721358 982
yes DDC 6‐10 AR‐PP/E/C‐F‐31I001FG 97721359 1,069
no DDC 6‐10 AR‐PP/V/C‐F‐31U2U2FG 97721362 982
yes DDC 6‐10 AR‐PP/V/C‐F‐31I001FG 97721363 1,069
no DDC 6‐10 AR‐PVC/E/C‐F‐31U2U2FG 97721366 1,010
yes DDC 6‐10 AR‐PVC/E/C‐F‐31I001FG 97721367 1,098
no DDC 6‐10 AR‐PVC/V/C‐F‐31U2U2FG 97721370 1,010
yes DDC 6‐10 AR‐PVC/V/C‐F‐31I001FG 97721371 1,098
no DDC 6‐10 AR‐PV/T/C‐F‐31U2U2FG 97721387 1,207
yes DDC 6‐10 AR‐PV/T/C‐F‐31I001FG 97721388 1,294
SS PTFE SS 1.4401 no DDC 6‐10 AR‐SS/T/SS‐F‐31AAFG 97721391 1,769
no DDC 9‐7 AR‐PP/E/C‐F‐31U2U2FG 97721427 982
yes DDC 9‐7 AR‐PP/E/C‐F‐31I002FG 97721428 1,088
no DDC 9‐7 AR‐PP/V/C‐F‐31U2U2FG 97721431 982
yes DDC 9‐7 AR‐PP/V/C‐F‐31I002FG 97721432 1,088
no DDC 9‐7 AR‐PVC/E/C‐F‐31U2U2FG 97721435 1,010
yes DDC 9‐7 AR‐PVC/E/C‐F‐31I002FG 97721436 1,117
no DDC 9‐7 AR‐PVC/V/C‐F‐31U2U2FG 97721439 1,010
yes DDC 9‐7 AR‐PVC/V/C‐F‐31I002FG 97721440 1,117
no DDC 9‐7 AR‐PV/T/C‐F‐31U2U2FG 97721455 1,207
yes DDC 9‐7 AR‐PV/T/C‐F‐31I002FG 97721456 1,314
SS PTFE SS 1.4401 no DDC 9‐7 AR‐SS/T/SS‐F‐31AAFG 97721459 1,769
no DDC 15‐4 AR‐PP/E/C‐F‐31U2U2FG 97721495 1,151
yes DDC 15‐4 AR‐PP/E/C‐F‐31I002FG 97721496 1,258
no DDC 15‐4 AR‐PP/V/C‐F‐31U2U2FG 97721499 1,151
yes DDC 15‐4 AR‐PP/V/C‐F‐31I002FG 97721500 1,258
no DDC 15‐4 AR‐PVC/E/C‐F‐31U2U2FG 97721503 1,180
yes DDC 15‐4 AR‐PVC/E/C‐F‐31I002FG 97721504 1,287
no DDC 15‐4 AR‐PVC/V/C‐F‐31U2U2FG 97721507 1,180
yes DDC 15‐4 AR‐PVC/V/C‐F‐31I002FG 97721508 1,287
no DDC 15‐4 AR‐PV/T/C‐F‐31U2U2FG 97721523 1,377
yes DDC 15‐4 AR‐PV/T/C‐F‐31I002FG 97721524 1,483
SS PTFE SS 1.4401 no DDC 15‐4 AR‐SS/T/SS‐F‐31AAFG 97721527 1,938
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
6 10
PP
PVC
PVDF
EPDM
FKM
EPDM
FKM
PTFE
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
15 4
PP
PVC
PVDF
9 7
PP
PVC
PVDF
EPDM
FKM
EPDM
FKM
PTFE
EPDM
FKM
EPDM
FKM
PTFE
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
DDC, standard range 13Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Spring loadedControls: AR versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDC 6‐10 AR‐PP/E/C‐F‐32U2U2FG 97721360 1,001
yes DDC 6‐10 AR‐PP/E/C‐F‐32I001FG 97721361 1,088
no DDC 6‐10 AR‐PP/V/C‐F‐32U2U2FG 97721364 1,001
yes DDC 6‐10 AR‐PP/V/C‐F‐32I001FG 97721365 1,088
no DDC 6‐10 AR‐PVC/E/C‐F‐32U2U2FG 97721368 1,030
yes DDC 6‐10 AR‐PVC/E/C‐F‐32I001FG 97721369 1,117
no DDC 6‐10 AR‐PVC/V/C‐F‐32U2U2FG 97721372 1,030
yes DDC 6‐10 AR‐PVC/V/C‐F‐32I001FG 97721373 1,117
no DDC 6‐10 AR‐PV/T/C‐F‐32U2U2FG 97721389 1,226
yes DDC 6‐10 AR‐PV/T/C‐F‐32I001FG 97721390 1,314
SS PTFE SS 1.4401 no DDC 6‐10 AR‐SS/T/SS‐F‐32AAFG 97721392 1,788
no DDC 9‐7 AR‐PP/E/C‐F‐32U2U2FG 97721429 1,001
yes DDC 9‐7 AR‐PP/E/C‐F‐32I002FG 97721430 1,108
no DDC 9‐7 AR‐PP/V/C‐F‐32U2U2FG 97721433 1,001
yes DDC 9‐7 AR‐PP/V/C‐F‐32I002FG 97721434 1,108
no DDC 9‐7 AR‐PVC/E/C‐F‐32U2U2FG 97721437 1,030
yes DDC 9‐7 AR‐PVC/E/C‐F‐32I002FG 97721438 1,136
no DDC 9‐7 AR‐PVC/V/C‐F‐32U2U2FG 97721441 1,030
yes DDC 9‐7 AR‐PVC/V/C‐F‐32I002FG 97721442 1,136
no DDC 9‐7 AR‐PV/T/C‐F‐32U2U2FG 97721457 1,226
yes DDC 9‐7 AR‐PV/T/C‐F‐32I002FG 97721458 1,333
SS PTFE SS 1.4401 no DDC 9‐7 AR‐SS/T/SS‐F‐32AAFG 97721460 1,788
no DDC 15‐4 AR‐PP/E/C‐F‐32U2U2FG 97721497 1,171
yes DDC 15‐4 AR‐PP/E/C‐F‐32I002FG 97721498 1,277
no DDC 15‐4 AR‐PP/V/C‐F‐32U2U2FG 97721501 1,171
yes DDC 15‐4 AR‐PP/V/C‐F‐32I002FG 97721502 1,277
no DDC 15‐4 AR‐PVC/E/C‐F‐32U2U2FG 97721505 1,199
yes DDC 15‐4 AR‐PVC/E/C‐F‐32I002FG 97721506 1,306
no DDC 15‐4 AR‐PVC/V/C‐F‐32U2U2FG 97721509 1,199
yes DDC 15‐4 AR‐PVC/V/C‐F‐32I002FG 97721510 1,306
no DDC 15‐4 AR‐PV/T/C‐F‐32U2U2FG 97721525 1,396
yes DDC 15‐4 AR‐PV/T/C‐F‐32I002FG 97721526 1,503
SS PTFE SS 1.4401 no DDC 15‐4 AR‐SS/T/SS‐F‐32AAFG 97721528 1,958
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
FKM Ceramic
PVDF PTFE Ceramic
9 7
PP
EPDM Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
Ceramic
15 4
PP
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE
DDC, standard range 14Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: A versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDC 6‐10 A‐PP/E/C‐F‐31U2U2FG 97721324 763
yes DDC 6‐10 A‐PP/E/C‐F‐31I001FG 97721325 851
no DDC 6‐10 A‐PP/V/C‐F‐31U2U2FG 97721328 763
yes DDC 6‐10 A‐PP/V/C‐F‐31I001FG 97721329 851
no DDC 6‐10 A‐PVC/E/C‐F‐31U2U2FG 97721332 793
yes DDC 6‐10 A‐PVC/E/C‐F‐31I001FG 97721333 880
no DDC 6‐10 A‐PVC/V/C‐F‐31U2U2FG 97721336 793
yes DDC 6‐10 A‐PVC/V/C‐F‐31I001FG 97721337 880
no DDC 6‐10 A‐PV/T/C‐F‐31U2U2FG 97721352 989
yes DDC 6‐10 A‐PV/T/C‐F‐31I001FG 97721353 1,076
SS PTFE SS 1.4401 no DDC 6‐10 A‐SS/T/SS‐F‐31AAFG 97721356 1,551
no DDC 9‐7 A‐PP/E/C‐F‐31U2U2FG 97721393 763
yes DDC 9‐7 A‐PP/E/C‐F‐31I002FG 97721394 870
no DDC 9‐7 A‐PP/V/C‐F‐31U2U2FG 97721397 763
yes DDC 9‐7 A‐PP/V/C‐F‐31I002FG 97721398 870
no DDC 9‐7 A‐PVC/E/C‐F‐31U2U2FG 97721401 793
yes DDC 9‐7 A‐PVC/E/C‐F‐31I002FG 97721402 899
no DDC 9‐7 A‐PVC/V/C‐F‐31U2U2FG 97721405 793
yes DDC 9‐7 A‐PVC/V/C‐F‐31I002FG 97721406 899
no DDC 9‐7 A‐PV/T/C‐F‐31U2U2FG 97721421 989
yes DDC 9‐7 A‐PV/T/C‐F‐31I002FG 97721422 1,095
SS PTFE SS 1.4401 no DDC 9‐7 A‐SS/T/SS‐F‐31AAFG 97721425 1,551
no DDC 15‐4 A‐PP/E/C‐F‐31U2U2FG 97721461 933
yes DDC 15‐4 A‐PP/E/C‐F‐31I002FG 97721462 1,040
no DDC 15‐4 A‐PP/V/C‐F‐31U2U2FG 97721465 933
yes DDC 15‐4 A‐PP/V/C‐F‐31I002FG 97721466 1,040
no DDC 15‐4 A‐PVC/E/C‐F‐31U2U2FG 97721469 962
yes DDC 15‐4 A‐PVC/E/C‐F‐31I002FG 97721470 1,069
no DDC 15‐4 A‐PVC/V/C‐F‐31U2U2FG 97721473 962
yes DDC 15‐4 A‐PVC/V/C‐F‐31I002FG 97721474 1,069
no DDC 15‐4 A‐PV/T/C‐F‐31U2U2FG 97721489 1,158
yes DDC 15‐4 A‐PV/T/C‐F‐31I002FG 97721490 1,265
SS PTFE SS 1.4401 no DDC 15‐4 A‐SS/T/SS‐F‐31AAFG 97721493 1,721
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
FKM Ceramic
PVDF PTFE Ceramic
9 7
PP
EPDM Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
Ceramic
15 4
PP
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE
DDC, standard range 15Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Spring loadedControls: A versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDC 6‐10 A‐PP/E/C‐F‐32U2U2FG 97721326 782
yes DDC 6‐10 A‐PP/E/C‐F‐32I001FG 97721327 870
no DDC 6‐10 A‐PP/V/C‐F‐32U2U2FG 97721330 782
yes DDC 6‐10 A‐PP/V/C‐F‐32I001FG 97721331 870
no DDC 6‐10 A‐PVC/E/C‐F‐32U2U2FG 97721334 812
yes DDC 6‐10 A‐PVC/E/C‐F‐32I001FG 97721335 899
no DDC 6‐10 A‐PVC/V/C‐F‐32U2U2FG 97721338 812
yes DDC 6‐10 A‐PVC/V/C‐F‐32I001FG 97721339 899
no DDC 6‐10 A‐PV/T/C‐F‐32U2U2FG 97721354 1,008
yes DDC 6‐10 A‐PV/T/C‐F‐32I001FG 97721355 1,095
SS PTFE SS 1.4401 no DDC 6‐10 A‐SS/T/SS‐F‐32AAFG 97721357 1,571
no DDC 9‐7 A‐PP/E/C‐F‐32U2U2FG 97721395 782
yes DDC 9‐7 A‐PP/E/C‐F‐32I002FG 97721396 889
no DDC 9‐7 A‐PP/V/C‐F‐32U2U2FG 97721399 782
yes DDC 9‐7 A‐PP/V/C‐F‐32I002FG 97721400 889
no DDC 9‐7 A‐PVC/E/C‐F‐32U2U2FG 97721403 812
yes DDC 9‐7 A‐PVC/E/C‐F‐32I002FG 97721404 919
no DDC 9‐7 A‐PVC/V/C‐F‐32U2U2FG 97721407 812
yes DDC 9‐7 A‐PVC/V/C‐F‐32I002FG 97721408 919
no DDC 9‐7 A‐PV/T/C‐F‐32U2U2FG 97721423 1,008
yes DDC 9‐7 A‐PV/T/C‐F‐32I002FG 97721424 1,115
SS PTFE SS 1.4401 no DDC 9‐7 A‐SS/T/SS‐F‐32AAFG 97721426 1,571
no DDC 15‐4 A‐PP/E/C‐F‐32U2U2FG 97721463 952
yes DDC 15‐4 A‐PP/E/C‐F‐32I002FG 97721464 1,059
no DDC 15‐4 A‐PP/V/C‐F‐32U2U2FG 97721467 952
yes DDC 15‐4 A‐PP/V/C‐F‐32I002FG 97721468 1,059
no DDC 15‐4 A‐PVC/E/C‐F‐32U2U2FG 97721471 982
yes DDC 15‐4 A‐PVC/E/C‐F‐32I002FG 97721472 1,088
no DDC 15‐4 A‐PVC/V/C‐F‐32U2U2FG 97721475 982
yes DDC 15‐4 A‐PVC/V/C‐F‐32I002FG 97721476 1,088
no DDC 15‐4 A‐PV/T/C‐F‐32U2U2FG 97721491 1,178
yes DDC 15‐4 A‐PV/T/C‐F‐32I002FG 97721492 1,284
SS PTFE SS 1.4401 no DDC 15‐4 A‐SS/T/SS‐F‐32AAFG 97721494 1,740
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
FKM Ceramic
PVDF PTFE Ceramic
9 7
PP
EPDM Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
Ceramic
15 4
PP
EPDM Ceramic
FKM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
PVDF PTFE
DDE, standard range 16Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: PR versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDE 6‐10 PR‐PP/E/C‐X‐31U2U2FG 98147240 533
yes DDE 6‐10 PR‐PP/E/C‐X‐31I001FG 98147261 612
no DDE 6‐10 PR‐PP/V/C‐X‐31U2U2FG 98147264 533
yes DDE 6‐10 PR‐PP/V/C‐X‐31I001FG 98147265 612
no DDE 6‐10 PR‐PVC/E/C‐X‐31U2U2FG 98147268 559
yes DDE 6‐10 PR‐PVC/E/C‐X‐31I001FG 98147269 638
no DDE 6‐10 PR‐PVC/V/C‐X‐31U2U2FG 98147272 559
yes DDE 6‐10 PR‐PVC/V/C‐X‐31I001FG 98147273 638
no DDE 6‐10 PR‐PV/T/C‐X‐31U2U2FG 98147288 737
yes DDE 6‐10 PR‐PV/T/C‐X‐31I001FG 98147289 816
SS PTFE SS 1.4401 no DDE 6‐10 PR‐SS/T/SS‐X‐31AAFG 98147292 1,246
no DDE 15‐4 PR‐PP/E/C‐X‐31U2U2FG 98147294 684
yes DDE 15‐4 PR‐PP/E/C‐X‐31I002FG 98147295 781
no DDE 15‐4 PR‐PP/V/C‐X‐31U2U2FG 98147298 684
yes DDE 15‐4 PR‐PP/V/C‐X‐31I002FG 98147299 781
no DDE 15‐4 PR‐PVC/E/C‐X‐31U2U2FG 98147302 711
yes DDE 15‐4 PR‐PVC/E/C‐X‐31I002FG 98147303 807
no DDE 15‐4 PR‐PVC/V/C‐X‐31U2U2FG 98147306 711
yes DDE 15‐4 PR‐PVC/V/C‐X‐31I002FG 98147307 807
no DDE 15‐4 PR‐PV/T/C‐X‐31U2U2FG 98147322 889
yes DDE 15‐4 PR‐PV/T/C‐X‐31I002FG 98147323 985
SS PTFE SS 1.4401 no DDE 15‐4 PR‐SS/T/SS‐X‐31AAFG 98147326 1,397
Valves: Spring loaded
no DDE 6‐10 PR‐PP/E/C‐X‐32U2U2FG 98147262 551
yes DDE 6‐10 PR‐PP/E/C‐X‐32I001FG 98147263 629
no DDE 6‐10 PR‐PP/V/C‐X‐32U2U2FG 98147266 551
yes DDE 6‐10 PR‐PP/V/C‐X‐32I001FG 98147267 629
no DDE 6‐10 PR‐PVC/E/C‐X‐32U2U2FG 98147270 577
yes DDE 6‐10 PR‐PVC/E/C‐X‐32I001FG 98147271 656
no DDE 6‐10 PR‐PVC/V/C‐X‐32U2U2FG 98147274 577
yes DDE 6‐10 PR‐PVC/V/C‐X‐32I001FG 98147275 656
no DDE 6‐10 PR‐PV/T/C‐X‐32U2U2FG 98147290 755
yes DDE 6‐10 PR‐PV/T/C‐X‐32I001FG 98147291 834
SS PTFE SS 1.4401 no DDE 6‐10 PR‐SS/T/SS‐X‐32AAFG 98147293 1,264
no DDE 15‐4 PR‐PP/E/C‐X‐32U2U2FG 98147296 702
yes DDE 15‐4 PR‐PP/E/C‐X‐32I002FG 98147297 799
no DDE 15‐4 PR‐PP/V/C‐X‐32U2U2FG 98147300 702
yes DDE 15‐4 PR‐PP/V/C‐X‐32I002FG 98147301 799
no DDE 15‐4 PR‐PVC/E/C‐X‐32U2U2FG 98147304 728
yes DDE 15‐4 PR‐PVC/E/C‐X‐32I002FG 98147305 825
no DDE 15‐4 PR‐PVC/V/C‐X‐32U2U2FG 98147308 728
yes DDE 15‐4 PR‐PVC/V/C‐X‐32I002FG 98147309 825
no DDE 15‐4 PR‐PV/T/C‐X‐32U2U2FG 98147324 906
yes DDE 15‐4 PR‐PV/T/C‐X‐32I002FG 98147325 1,002
SS PTFE SS 1.4401 no DDE 15‐4 PR‐SS/T/SS‐X‐32AAFG 98147327 1,415
IMPORTANT: If external stop signal is needed as N/C please order 95725190 bridging plug, see page 19
(The plug is installed in the level input socket and then the socket is closed with supplied cap)
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
15 4
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
15 4
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
DDE, standard range 17Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: P versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Price
flow pressure dosing gaskets valve set designation number
l/hr bar head balls included*
no DDE 6‐10 P‐PP/E/C‐X‐31U2U2FG 97720949 474
yes DDE 6‐10 P‐PP/E/C‐X‐31I001FG 97720950 552
no DDE 6‐10 P‐PP/V/C‐X‐31U2U2FG 97720953 474
yes DDE 6‐10 P‐PP/V/C‐X‐31I001FG 97720954 552
no DDE 6‐10 P‐PVC/E/C‐X‐31U2U2FG 97720957 500
yes DDE 6‐10 P‐PVC/E/C‐X‐31I001FG 97720958 579
no DDE 6‐10 P‐PVC/V/C‐X‐31U2U2FG 97720961 500
yes DDE 6‐10 P‐PVC/V/C‐X‐31I001FG 97720962 579
no DDE 6‐10 P‐PV/T/C‐X‐31U2U2FG 97720977 678
yes DDE 6‐10 P‐PV/T/C‐X‐31I001FG 97720978 757
SS PTFE SS 1.4401 no DDE 6‐10 P‐SS/T/SS‐X‐31AAFG 97720981 1,187
no DDE 15‐4 P‐PP/E/C‐X‐31U2U2FG 97721017 625
yes DDE 15‐4 P‐PP/E/C‐X‐31I002FG 97721018 722
no DDE 15‐4 P‐PP/V/C‐X‐31U2U2FG 97721021 625
yes DDE 15‐4 P‐PP/V/C‐X‐31I002FG 97721022 722
no DDE 15‐4 P‐PVC/E/C‐X‐31U2U2FG 97721025 651
yes DDE 15‐4 P‐PVC/E/C‐X‐31I002FG 97721026 748
no DDE 15‐4 P‐PVC/V/C‐X‐31U2U2FG 97721029 651
yes DDE 15‐4 P‐PVC/V/C‐X‐31I002FG 97721030 748
no DDE 15‐4 P‐PV/T/C‐X‐31U2U2FG 97721045 829
yes DDE 15‐4 P‐PV/T/C‐X‐31I002FG 97721046 925
SS PTFE SS 1.4401 no DDE 15‐4 P‐SS/T/SS‐X‐31AAFG 97721049 1,338
Valves: Spring loaded
no DDE 6‐10 P‐PP/E/C‐X‐32U2U2FG 97720951 492
yes DDE 6‐10 P‐PP/E/C‐X‐32I001FG 97720952 570
no DDE 6‐10 P‐PP/V/C‐X‐32U2U2FG 97720955 492
yes DDE 6‐10 P‐PP/V/C‐X‐32I001FG 97720956 570
no DDE 6‐10 P‐PVC/E/C‐X‐32U2U2FG 97720959 518
yes DDE 6‐10 P‐PVC/E/C‐X‐32I001FG 97720960 596
no DDE 6‐10 P‐PVC/V/C‐X‐32U2U2FG 97720963 518
yes DDE 6‐10 P‐PVC/V/C‐X‐32I001FG 97720964 596
no DDE 6‐10 P‐PV/T/C‐X‐32U2U2FG 97720979 695
yes DDE 6‐10 P‐PV/T/C‐X‐32I001FG 97720980 774
SS PTFE SS 1.4401 no DDE 6‐10 P‐SS/T/SS‐X‐32AAFG 97720982 1,204
no DDE 15‐4 P‐PP/E/C‐X‐32U2U2FG 97721019 642
yes DDE 15‐4 P‐PP/E/C‐X‐32I002FG 97721020 739
no DDE 15‐4 P‐PP/V/C‐X‐32U2U2FG 97721023 642
yes DDE 15‐4 P‐PP/V/C‐X‐32I002FG 97721024 739
no DDE 15‐4 P‐PVC/E/C‐X‐32U2U2FG 97721027 669
yes DDE 15‐4 P‐PVC/E/C‐X‐32I002FG 97721028 766
no DDE 15‐4 P‐PVC/V/C‐X‐32U2U2FG 97721031 669
yes DDE 15‐4 P‐PVC/V/C‐X‐32I002FG 97721032 766
no DDE 15‐4 P‐PV/T/C‐X‐32U2U2FG 97721047 847
yes DDE 15‐4 P‐PV/T/C‐X‐32I002FG 97721048 943
SS PTFE SS 1.4401 no DDE 15‐4 P‐SS/T/SS‐X‐32AAFG 97721050 1,355
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
6 10
PP
PVC
PVDF
EPDM
FKM
EPDM
FKM
PTFE
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
PP
EPDM Ceramic
FKM Ceramic
15
6 10
PP
EPDM
PVDF PTFE
PVC
EPDM
FKM
PVDF PTFE
Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
4Ceramic
Ceramic
Ceramic
Ceramic
FKM Ceramic
PVDF PTFE Ceramic
Ceramic
15 4
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM
DDE, standard range 18Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Valves: Standard (without springs)Controls: B versionConnection set: Hose, 4/6 mm, 6/12 mm, 9/12 mm (PVC, PP, PVDF)
Threaded, Rp 1/4", female (SS)
Max. Max. Materials Installation Type Product Priceflow pressure dosing gaskets valve set designation numberl/hr bar head balls included*
no DDE 6‐10 B‐PP/E/C‐X‐31U2U2FG 97720905 384
yes DDE 6‐10 B‐PP/E/C‐X‐31I001FG 97720906 463
no DDE 6‐10 B‐PP/V/C‐X‐31U2U2FG 97720909 384
yes DDE 6‐10 B‐PP/V/C‐X‐31I001FG 97720910 463
no DDE 6‐10 B‐PVC/E/C‐X‐31U2U2FG 97720923 410
yes DDE 6‐10 B‐PVC/E/C‐X‐31I001FG 97720924 489
no DDE 6‐10 B‐PVC/V/C‐X‐31U2U2FG 97720927 410
yes DDE 6‐10 B‐PVC/V/C‐X‐31I001FG 97720928 489
no DDE 6‐10 B‐PV/T/C‐X‐31U2U2FG 97720943 588
yes DDE 6‐10 B‐PV/T/C‐X‐31I001FG 97720944 667
SS PTFE SS 1.4401 no DDE 6‐10 B‐SS/T/SS‐X‐31AAFG 97720947 1,097
no DDE 15‐4 B‐PP/E/C‐X‐31U2U2FG 97720983 536
yes DDE 15‐4 B‐PP/E/C‐X‐31I002FG 97720984 631
no DDE 15‐4 B‐PP/V/C‐X‐31U2U2FG 97720987 536
yes DDE 15‐4 B‐PP/V/C‐X‐31I002FG 97720988 631
no DDE 15‐4 B‐PVC/E/C‐X‐31U2U2FG 97720991 561
yes DDE 15‐4 B‐PVC/E/C‐X‐31I002FG 97720992 658
no DDE 15‐4 B‐PVC/V/C‐X‐31U2U2FG 97720995 561
yes DDE 15‐4 B‐PVC/V/C‐X‐31I002FG 97720996 658
no DDE 15‐4 B‐PV/T/C‐X‐31U2U2FG 97721011 739
yes DDE 15‐4 B‐PV/T/C‐X‐31I002FG 97721012 836
SS PTFE SS 1.4401 no DDE 15‐4 B‐SS/T/SS‐X‐31AAFG 97721015 1,248
Valves: Spring loaded
no DDE 6‐10 B‐PP/E/C‐X‐32U2U2FG 97720907 401
yes DDE 6‐10 B‐PP/E/C‐X‐32I001FG 97720908 481
no DDE 6‐10 B‐PP/V/C‐X‐32U2U2FG 97720921 401
yes DDE 6‐10 B‐PP/V/C‐X‐32I001FG 97720922 481
no DDE 6‐10 B‐PVC/E/C‐X‐32U2U2FG 97720925 428
yes DDE 6‐10 B‐PVC/E/C‐X‐32I001FG 97720926 507
no DDE 6‐10 B‐PVC/V/C‐X‐32U2U2FG 97720929 428
yes DDE 6‐10 B‐PVC/V/C‐X‐32I001FG 97720930 507
no DDE 6‐10 B‐PV/T/C‐X‐32U2U2FG 97720945 605
yes DDE 6‐10 B‐PV/T/C‐X‐32I001FG 97720946 684
SS PTFE SS 1.4401 no DDE 6‐10 B‐SS/T/SS‐X‐32AAFG 97720948 1,114
no DDE 15‐4 B‐PP/E/C‐X‐32U2U2FG 97720985 553
yes DDE 15‐4 B‐PP/E/C‐X‐32I002FG 97720986 649
no DDE 15‐4 B‐PP/V/C‐X‐32U2U2FG 97720989 553
yes DDE 15‐4 B‐PP/V/C‐X‐32I002FG 97720990 649
no DDE 15‐4 B‐PVC/E/C‐X‐32U2U2FG 97720993 579
yes DDE 15‐4 B‐PVC/E/C‐X‐32I002FG 97720994 675
no DDE 15‐4 B‐PVC/V/C‐X‐32U2U2FG 97720997 579
yes DDE 15‐4 B‐PVC/V/C‐X‐32I002FG 97720998 675
no DDE 15‐4 B‐PV/T/C‐X‐32U2U2FG 97721013 757
yes DDE 15‐4 B‐PV/T/C‐X‐32I002FG 97721014 853
SS PTFE SS 1.4401 no DDE 15‐4 B‐SS/T/SS‐X‐32AAFG 97721016 1,266
FKM Ceramic
PVDF PTFE Ceramic
15 4
PP
EPDM Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVC
EPDM Ceramic
FKM Ceramic
PVDF PTFE
Ceramic
PVC
EPDM Ceramic
6 10
PP
EPDM Ceramic
FKM Ceramic
PVDF PTFE Ceramic
Ceramic
*Installation set includes: 2 pump connections, foot valve, injection unit, 6 m PE discharge tube, 2 m PVC suction tube, 2 m PVC vent
tube (4/6 mm) ‐ without level switches
15 4
PP
EPDM Ceramic
FKM
FKM Ceramic
PVDF PTFE
Installation kits for dosing pumps 19No level switch:
Suct./
disch.
hose
FKM Ceramic Inst.kit I001 PP/V/C‐4/6mm‐NL 95730440 67
EPDM Ceramic Inst.kit I001 PP/E/C‐4/6mm‐NL 95730441 67
FKM Ceramic Inst.kit I001 PVC/V/C‐4/6mm‐NL 95730442 67
EPDM Ceramic Inst.kit I001 PVC/E/C‐4/6mm‐NL 95730443 67
PVC PTFE Ceramic Inst.kit I001 PVC/T/C‐4/6mm‐NL 95730444 79
FKM Ceramic Inst.kit I001 PV/V/C‐4/6mm‐NL 95730445 88
EPDM Ceramic Inst.kit I001 PV/E/C‐4/6mm‐NL 95730446 88
PTFE Ceramic Inst.kit I001 PV/T/C‐4/6mm‐NL 95730447 98
FKM Ceramic Inst.kit I005 PP/V/C‐6/9mm‐NL 95730448 75
EPDM Ceramic Inst.kit I005 PP/E/C‐6/9mm‐NL 95730449 75
FKM Ceramic Inst.kit I005 PVC/V/C‐6/9mm‐NL 95730450 75
EPDM Ceramic Inst.kit I005 PVC/E/C‐6/9mm‐NL 95730451 75
PVC PTFE Ceramic Inst.kit I005 PVC/T/C‐6/9mm‐NL 95730452 90
FKM Ceramic Inst.kit I005 PV/V/C‐6/9mm‐NL 95730453 96
EPDM Ceramic Inst.kit I005 PV/E/C‐6/9mm‐NL 95730454 96
PTFE Ceramic Inst.kit I005 PV/T/C‐6/9mm‐NL 95730455 108
FKM Ceramic Inst.kit I002 PP/V/C‐9/12mm‐NL 95730456 81
EPDM Ceramic Inst.kit I002 PP/E/C‐9/12mm‐NL 95730457 81
FKM Ceramic Inst.kit I002 PVC/V/C‐9/12mm‐NL 95730458 81
EPDM Ceramic Inst.kit I002 PVC/E/C‐9/12mm‐NL 95730459 81
PVC PTFE Ceramic Inst.kit I002 PVC/T/C‐9/12mm‐NL 95730460 89
FKM Ceramic Inst.kit I002 PV/V/C‐9/12mm‐NL 95730461 98
EPDM Ceramic Inst.kit I002 PV/E/C‐9/12mm‐NL 95730462 98
PTFE Ceramic Inst.kit I002 PV/T/C‐9/12mm‐NL 95730463 111
With dual level switch:
Suct./
disch.
hose
FKM Ceramic Inst.kit I011 PP/V/C‐4/6mm‐2L 95730464 125
EPDM Ceramic Inst.kit I011 PP/E/C‐4/6mm‐2L 95730465 125
FKM Ceramic Inst.kit I011 PVC/V/C‐4/6mm‐2L 95730466 125
EPDM Ceramic Inst.kit I011 PVC/E/C‐4/6mm‐2L 95730467 125
PTFE Ceramic Inst.kit I011 PVC/T/C‐4/6mm‐2L 95730468 136
FKM Ceramic Inst.kit I011 PV/V/C‐4/6mm‐2L 95730469 153
EPDM Ceramic Inst.kit I011 PV/E/C‐4/6mm‐2L 95730470 153
PTFE Ceramic Inst.kit I011 PV/T/C‐4/6mm‐2L 95730471 170
FKM Ceramic Inst.kit I015 PP/V/C‐6/9mm‐2L 95730472 134
EPDM Ceramic Inst.kit I015 PP/E/C‐6/9mm‐2L 95730473 134
FKM Ceramic Inst.kit I015 PVC/V/C‐6/9mm‐2L 95730474 134
EPDM Ceramic Inst.kit I015 PVC/E/C‐6/9mm‐2L 95730475 134
PTFE Ceramic Inst.kit I015 PVC/T/C‐6/9mm‐2L 95730476 153
FKM Ceramic Inst.kit I015 PV/V/C‐6/9mm‐2L 95730477 163
EPDM Ceramic Inst.kit I015 PV/E/C‐6/9mm‐2L 95730478 163
PTFE Ceramic Inst.kit I015 PV/T/C‐6/9mm‐2L 95730479 180
FKM Ceramic Inst.kit I012 PP/V/C‐9/12mm‐2L 95730480 138
EPDM Ceramic Inst.kit I012 PP/E/C‐9/12mm‐2L 95730481 138
FKM Ceramic Inst.kit I012 PVC/V/C‐9/12mm‐2L 95730482 138
EPDM Ceramic Inst.kit I012 PVC/E/C‐9/12mm‐2L 95730483 138
PTFE Ceramic Inst.kit I012 PVC/T/C‐9/12mm‐2L 95730484 151
FKM Ceramic Inst.kit I012 PV/V/C‐9/12mm‐2L 95730485 166
EPDM Ceramic Inst.kit I012 PV/E/C‐9/12mm‐2L 95730486 166
PTFE Ceramic Inst.kit I012 PV/T/C‐9/12mm‐2L 95730487 182
PP
Max.
pressure
[bar]
Product
numberPrice
7.5 13 4/6 mm
PP
PVC
PVDF
30 12 6/9 mm
PP
PVC
PVDF
PVC
PVDF
Housing Gasket Ball
4/6 mm
PP
PVC
PVDF
60 9 9/12 mm
PP
PVC
PVDF
7.5 13
Installation kit includes: foot valve with strainer, injection unit with spring loaded non return valve, 6 m PE discharge tube, 2 m PVC
suction tube, 2 m PVC vent tube (4/6 mm). With dual level switch.
Max.
flow
[l/h]
DescriptionProduct
numberPrice
Max.
flow
[l/h]
Max.
pressure
[bar]
30 12 6/9 mm
60 9 9/12 mm
PP
PVC
PVDF
Ball DescriptionHousing Gasket
Installation kit includes: foot valve with strainer, injection unit with spring loaded non return valve, 6 m PE discharge tube, 2 m PVC
suction tube, 2 m PVC vent tube (4/6 mm). No level switch.
Cables and plugs 20
2 96609014 27
5 96609016 32
No cable 96698715 23
Angled 2 96693246 40
96698715 23
2 96632921 27
5 96632922 32
No cable 96609031 23
Angled 2 96699697 40
2 96609017 27
5 96609019 32
No cable 96696198 23
Angled 2 96698716 40
95725190 27Input
Cable 2: Level Input
DDE‐PR bridging plug for
N/C external stop
4 Straight with cap No cable
Straight
Cable 2: Level Input
Low level
Empty tank
4
Output
Cable 4: Relay output
Relay 1
Relay 2
4
Output
Cable 3: GENIbus, analogue
output
Analogue
Genibus
5Straight
Plug typeCable length
[m]
Product
number
controllers, flow meters, level control units, etc. Cable material: PVC, 0.34 mm2, plug type: M 12
Straight
Price
Input
Cable 1: Signal Input
Analogue
Pulse
External stop
4Straight
No cableInput
Socket Application Pins
Cables and plugs are used for the connection of the dosing pump to external control devices, such as process
Functions 21
Overview of functions DME 60‐940 Digital Dosing Pumps
Variant Variant AR AP
Capacity control
Internal stroke‐frequency control
Internal stroke‐speed control
Control panel
Capacity setting in litres, ml or US gals
Display with background light & soft touch buttons
Easy set‐up menu with language options
On/off button
Maximum capacity button (priming)
Green indicator light for operating indication
Red indicator light for fault indication
Control panel lock
Side‐fitted as an option
Operating modes
Manual control
Pulse control
Analogue 0/4‐20 mA control
Timer‐based batch control
Pulse‐based batch control
PROFIBUS enabled
Functions
Dosing monitoring
Dual‐level control
Calibration of pump to actual installation
Anti‐cavitation (reduced suction speed)
Capacity limitation
Counters for strokes, operating hours and power on/off
Fieldbus communication
Overload protection
Error message in display
Leakage sensor
Dosing signal output
Power supply
Switch‐mode power supply
Inputs/outputs
Input for pulse control
Input for analogue 0/4‐20 mA control
Input for dual‐level control
Input for external start/stop
Alarm relay output
Dosing output
Input for external on/off switch
BVariant
DME, standard range 22Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: AR versionConnection set:
Control
Dosing
headGaskets Valve balls
panel
position
19/27 DME 60‐10 AR‐PP/E/C‐F‐31QQF Front‐fitted 96524874 2,124
25/34 DME 60‐10 AR‐PP/E/C‐S‐31QQF Side‐fitted 96524879 2,155
19/27 DME 60‐10 AR‐PP/V/C‐F‐31QQF Front‐fitted 96524910 2,124
25/34 DME 60‐10 AR‐PP/V/C‐S‐31QQF Side‐fitted 96524911 2,155
19/27 DME 60‐10 AR‐PV/V/C‐F‐31QQF Front‐fitted 96524912 2,294
25/34 DME 60‐10 AR‐PV/V/C‐S‐31QQF Side‐fitted 96524913 2,324
DME 60‐10 AR‐SS/T/SS‐F‐31A1A1F Front‐fitted 97503509 2,758
DME 60‐10 AR‐SS/T/SS‐S‐31A1A1F Side‐fitted 97503521 2,790
19/27 DME 150‐4 AR‐PP/E/C‐F‐31QQF Front‐fitted 96524925 2,360
25/34 DME 150‐4 AR‐PP/E/C‐S‐31QQF Side‐fitted 96524926 2,392
19/27 DME 150‐4 AR‐PP/V/C‐F‐31QQF Front‐fitted 96524927 2,360
25/34 DME 150‐4 AR‐PP/V/C‐S‐31QQF Side‐fitted 96524928 2,392
19/27 DME 150‐4 AR‐PV/V/C‐F‐31QQF Front‐fitted 96524929 2,547
25/34 DME 150‐4 AR‐PV/V/C‐S‐31QQF Side‐fitted 96524930 2,579
DME 150‐4 AR‐SS/T/SS‐F‐31A1A1F Front‐fitted 96987376 3,054
DME 150‐4 AR‐SS/T/SS‐S‐31A1A1F Side‐fitted 97503525 3,086
DME 375‐10 AR‐PP/V/G‐F‐31A2A2F Front‐fitted 96524943 4,018
DME 375‐10 AR‐PP/V/G‐S‐31A2A2F Side‐fitted 96524944 4,070
DME 375‐10 AR‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905007 4,081
DME 375‐10 AR‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905009 4,134
DME 375‐10 AR‐PV/T/C‐F‐31A2A2F Front‐fitted 95905047 5,080
DME 375‐10 AR‐PV/T/C‐S‐31A2A2F Side‐fitted 95905049 5,132
DME 375‐10 AR‐SS/T/SS‐F‐31A2A2F Front‐fitted 96987377 4,976
DME 375‐10 AR‐SS/T/SS‐S‐31A2A2F Side‐fitted 97503530 5,028
DME940‐4 AR‐PP/V/G‐F‐31A2A2F Front‐fitted 96524960 4,773
DME 940‐4 AR‐PP/V/G‐S‐31A2A2F Side‐fitted 96524961 4,825
DME 940‐4 AR‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905195 4,836
DME 940‐4 AR‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905197 4,889
DME 940‐4 AR‐PV/T/C‐F‐31A2A2F Front‐fitted 95905235 5,946
DME 940‐4 AR‐PV/T/C‐S‐31A2A2F Side‐fitted 95905237 5,998
DME 940‐4 AR‐SS/T/SS‐F‐31A2A2F Front‐fitted 97503533 5,917
DME 940‐4 AR‐SS/T/SS‐S‐31A2A2F Side‐fitted 97503534 5,970
PVDF
SS PTFE
FKM
Rp 1 1/4
SS 1.4401
Ceramic
GlassPP FKM
EPDM
FKM
375 10
PTFE
PP
FKM
4
PTFE
PP
PP
940
150
4
PVDF
Ceramic
Ceramic
Rp 1 1/4
Rp 1 1/4
Ceramic
Max.
flow
[l/h]
Max.
pressure
[bar]
Materials
CeramicFKM
60 10
SS 1.4401
PP
PP
PVDF
Ceramic
Ceramic
EPDM
FKM
SS PTFE Rp 3/4
SS 1.4401
SS 1.4401 Rp 1 1/4
Rp 1 1/4
Rp 1 1/4
Rp 3/4SS 1.4401
Glass
PP
EPDM
SS PTFE
PP EPDM
PTFE
Type designation
* 19/27, 25/34, 32/41 and 38/48 are inner/outer tubing diameters in mm for hose
clamp connectors. Rp 3/4 and Rp 1 1/4 connections have internal thread for pipe
Connection*
SS 1.4401 Rp 1 1/4
PVDF
SS
Ceramic
Rp 1 1/4
Product
numberPrice
DME, standard range 23Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: AP version ‐ PROFIBUS These DME pumps are supplied with an IP 65 RS‐485 M12 connectorConnection set:
Control
Dosing
headGaskets Valve balls
panel
position
19/27 DME 60‐10 AP‐PP/E/C‐F‐31QQF Front‐fitted 96563689 2,779
25/34 DME 60‐10 AP‐PP/E/C‐S‐31QQF Side‐fitted 96549506 2,585
19/27 DME 60‐10 AP‐PP/V/C‐F‐31QQF Front‐fitted 96603660 2,779
25/34 DME 60‐10 AP‐PP/V/C‐S‐31QQF Side‐fitted 96573453 2,809
19/27 DME 60‐10 AP‐PV/V/C‐F‐31QQF Front‐fitted 96584415 2,948
25/34 DME 60‐10 AP‐PV/V/C‐S‐31QQF Side‐fitted 96608711 2,979
DME 60‐10 AP‐SS/V/SS‐F‐31A1A1F Front‐fitted 96565201 3,311
DME 60‐10 AP‐SS/V/SS‐S‐31A1A1F Side‐fitted 96625314 3,342
19/27 DME 150‐4 AP‐PP/E/C‐F‐31QQF Front‐fitted 96572713 3,031
25/34 DME 150‐4 AP‐PP/E/C‐S‐31QQF Side‐fitted 96564838 3,063
19/27 DME 150‐4 AP‐PP/V/C‐F‐31QQF Front‐fitted 96566206 3,031
25/34 DME 150‐4 AP‐PP/V/C‐S‐31QQF Side‐fitted 96538491 3,007
19/27 DME 150‐4 AP‐PV/V/C‐F‐31QQF Front‐fitted 96538654 3,218
25/34 DME 150‐4 AP‐PV/V/C‐S‐31QQF Side‐fitted 96622214 3,250
DME 150‐4 AP‐SS/V/SS‐F‐31A1A1F Front‐fitted 96584368 3,620
DME 150‐4 AP‐SS/V/SS‐S‐31A1A1F Side‐fitted 96746934 3,626
DME 375‐10 AP‐PP/V/G‐F‐31A2A2F Front‐fitted 95905133 4,783
DME 375‐10 AP‐PP/V/G‐S‐31A2A2F Side‐fitted 95905135 4,836
DME 375‐10 AP‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905129 4,846
DME 375‐10 AP‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905131 4,899
DME 375‐10 AP‐PV/T/C‐F‐31A2A2F Front‐fitted 95905173 5,845
DME 375‐10 AP‐PV/T/C‐S‐31A2A2F Side‐fitted 95905175 5,897
DME 375‐10 AP‐SS/E/SS‐F‐31A2A2F Front‐fitted 95905181 5,598
DME 375‐10 AP‐SS/E/SS‐S‐31A2A2F Side‐fitted 95905183 5,651
DME 940‐4 AP‐PP/V/G‐F‐31A2A2F Front‐fitted 95905321 5,538
DME 940‐4 AP‐PP/V/G‐S‐31A2A2F Side‐fitted 95905323 5,591
DME 940‐4 AP‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905317 5,602
DME 940‐4 AP‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905319 5,654
DME 940‐4 AP‐PV/T/C‐F‐31A2A2F Front‐fitted 95905361 6,710
DME 940‐4 AP‐PV/T/C‐S‐31A2A2F Side‐fitted 95905363 6,762
DME 940‐4 AP‐SS/V/SS‐F‐31A2A2F Front‐fitted 95905373 6,554
DME 940‐4 AP‐SS/V/SS‐S‐31A2A2F Side‐fitted 95905375 6,606
Ceramic
Glass
Rp 3/4
Rp 3/4
Ceramic
Ceramic
SS 1.4401
Rp 1 1/4
Rp 1 1/4
Rp 1 1/4
Connection*
FKM
PP
10
PVDF
940
60 10
375
150 4
SS
PVDF
4
PP
PP
PVDF
SS
PP
PVDF
Rp 1 1/4
PP
SS
FKM
EPDM
EPDM
Rp 1 1/4
SS 1.4401
FKM
PTFE
PP EPDM
PP
SS FKM SS 1.4401
FKM
PP
Glass
PTFE
SS 1.4401EPDM
FKM
Rp 1 1/4
Rp 1 1/4
Rp 1 1/4
Ceramic
Max.
flow
[l/h]
Max.
pressure
[bar]
* 19/27, 25/34, 32/41 and 38/48 are inner/outer tubing diameters in mm for hose
clamp connectors. Rp 3/4 and Rp 1 1/4 connections have internal thread for pipe
Type designation
SS 1.4401
Materials
SS 1.4401
Ceramic
Ceramic
FKM Ceramic
PTFE
Product
numberPrice
PTFE
Ceramic
FKM
DME, standard range 24Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: B version (manual adjustment only)Connection set:
Control
Dosing
headGaskets Valve balls
panel
position
19/27 DME 60‐10 B‐PP/E/C‐F‐31QQF Front‐fitted 96524916 1,594
25/34 DME 60‐10 B‐PP/E/C‐S‐31QQF Side‐fitted 96524917 1,626
19/27 DME 60‐10 B‐PP/V/C‐F‐31QQF Front‐fitted 96524918 1,594
25/34 DME 60‐10 B‐PP/V/C‐S‐31QQF Side‐fitted 96524919 1,626
19/27 DME 60‐10 B‐PV/V/C‐F‐31QQF Front‐fitted 96524920 1,764
25/34 DME 60‐10 B‐PV/V/C‐S‐31QQF Side‐fitted 96524921 1,795
DME 60‐10 B‐SS/T/SS‐F‐31A1A1F Front‐fitted 97503522 2,229
DME 60‐10 B‐SS/T/SS‐S‐31A1A1F Side‐fitted 97503523 2,259
19/27 DME 150‐4 B‐PP/E/C‐F‐31QQF Front‐fitted 96524933 1,815
25/34 DME 150‐4 B‐PP/E/C‐S‐31QQF Side‐fitted 96524934 1,846
19/27 DME 150‐4 B‐PP/V/C‐F‐31QQF Front‐fitted 96524935 1,815
25/34 DME 150‐4 B‐PP/V/C‐S‐31QQF Side‐fitted 96524936 1,846
19/27 DME 150‐4 B‐PV/V/C‐F‐31QQF Front‐fitted 96524937 2,001
25/34 DME 150‐4 B‐PV/V/C‐S‐31QQF Side‐fitted 96524938 2,034
DME 150‐4 B‐SS/T/SS‐F‐31A1A1F Front‐fitted 97503526 2,509
DME 150‐4 B‐SS/T/SS‐S‐31A1A1F Side‐fitted 97503529 2,541
DME 375‐10 B‐PP/E/G‐F‐31A2A2F Front‐fitted 96524949 3,354
DME 375‐10 B‐PP/E/G‐S‐31A2A2F Side‐fitted 96524950 3,407
DME 375‐10 B‐PP/V/G‐F‐31A2A2F Front‐fitted 96524951 3,368
DME 375‐10 B‐PP/V/G‐S‐31A2A2F Side‐fitted 96524952 3,420
DME 375‐10 B‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905067 3,431
DME 375‐10 B‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905069 3,483
DME 375‐10 B‐PV/V/G‐F‐31A2A2F Front‐fitted 96524953 3,850
DME 375‐10 B‐PV/V/G‐S‐31A2A2F Side‐fitted 96524954 3,902
DME 375‐10 B‐SS/T/SS‐F‐31A2A2F Front‐fitted 97503531 4,325
DME 375‐10 B‐SS/T/SS‐S‐31A2A2F Side‐fitted 97503532 4,378
DME 940‐4 B‐PP/E/G‐F‐31A2A2F Front‐fitted 96524966 4,113
DME 940‐4 B‐PP/E/G‐S‐31A2A2F Side‐fitted 96524967 4,165
DME 940‐4 B‐PP/V/G‐F‐31A2A2F Front‐fitted 96524968 4,126
DME 940‐4 B‐PP/V/G‐S‐31A2A2F Side‐fitted 96524969 4,178
DME 940‐4 B‐PP/E/SS‐F‐31A2A2F Front‐fitted 95905255 4,189
DME 940‐4 B‐PP/E/SS‐S‐31A2A2F Side‐fitted 95905257 4,242
DME 940‐4 B‐PV/V/G‐F‐31A2A2F Front‐fitted 96524980 4,719
DME 940‐4 B‐PV/V/G‐S‐31A2A2F Side‐fitted 96524981 4,771
DME 940‐4 B‐SS/T/SS‐F‐31A2A2F Front‐fitted 97503537 5,269
DME 940‐4 B‐SS/T/SS‐S‐31A2A2F Side‐fitted 97503538 5,322
EPDM
CeramicFKM
FKM
Ceramic
Connection*
Rp 1 1/4
Ceramic
Rp 3/4
Ceramic
Rp 3/4PTFE
EPDM
SS 1.4401 Rp 1 1/4
Glass Rp 1 1/4
EPDM SS 1.4401 Rp 1 1/4
PTFE
SS 1.4401
SS 1.4401
Ceramic
Rp 1 1/4
SS PTFE SS 1.4401 Rp 1 1/4
FKM Glass
PP
EPDM
FKM
Glass
Rp 1 1/4Glass
Rp 1 1/4
Rp 1 1/4940 PP
PVDF
PP
4
60 10
PP
PP
SS
375
PP
10 PP
4
PP
150
PP
FKM
Max.
flow
[l/h]
Max.
pressure
[bar]
* 19/27, 25/34, 32/41 and 38/48 are inner/outer tubing diameters in mm for hose
clamp connectors. Rp 3/4 and Rp 1 1/4 connections have internal thread for pipe
Type designationProduct
numberPrice
Materials
SS
PTFE
PVDF
EPDM
FKM
SS
PVDF
Rp 1 1/4Glass
Glass
PP
PVDF Ceramic
FKM
EPDM
FKM
SS 1.4401
DME cables and plugs 25
2 96440447 29
5 96440448 34
2 96534214 45
5 96534215 56
2 96527109 29
5 96527111 34
2 96440450 29
5 96440451 32
96440449 21
4 ‐ 96440452 22
96606401 21
Diaphragm leakage sensor
DME (60‐940) M12 Leakage sensor, M12 0.5 m 96534443 300
Dosing monitor
96655230 456
96655231 456
96655232 601
96655233 601
PLUG ONLY: Input for analogue signal, pulse signal and diaphragm
leakage.5 ‐
DescriptionNumber of
poles/wires
CABLE 4: Dual level input (empty tank and low level).
Cable and moulded plug
CABLE 3: Input for dosing stop and dosing monitor or dosing
output (pump run). Cable and moulded plug
CABLE 1: Input for analogue signal, pulse signal and diaphragm
leakage. Cable and moulded plug
4
5
Product
numberPriceType
Product
numberPrice
Cable length
Pump type Material
Size
DME 60 and 150
DME 375 and 940
PP/EPDM
PP/FKM
PP/EPDM
PP/FKM
5
3CABLE 2: Alarm relay output.
Cable and moulded plug
Product
numberPrice
5
PLUG ONLY: Dual level input (empty tank and low level)
Cable length (m)
Pump type
‐PLUG ONLY: Input for dosing stop and dosing monitor or dosing
output (pump run)
Functions 26
Overview of functions DDI 60‐150 Digital Dosing Pumps
Variant Variant Variant Variant AR AF AP APF
Capacity control
Internal stroke‐frequency control
Internal stroke‐speed control
Control panel
Capacity setting in litres, ml or US gals
Display with background light & soft touch buttons
Easy set‐up menu with language options
On/off button
Maximum capacity button (priming)
Green indicator light for operating indication
Red indicator light for fault indication
Control panel lock
Side‐fitted as an option
Operating modes
Manual control
Pulse control
Analogue 0/4‐20 mA control
Timer‐based batch control
Pulse‐based batch control
PROFIBUS enabled
Functions
Flow monitoring
Dual‐level control
Calibration of pump to actual installation
Anti‐cavitation (reduced suction speed)
Capacity limitation
Counters for strokes, operating hours and power on/off
Fieldbus communication
Overload protection
Error message in display
Leakage sensor
Dosing signal output
Power supply
Switch‐mode power supply
Inputs/outputs
Input for pulse control
Input for analogue 0/4‐20 mA control
Input for dual‐level control
Input for external start/stop
Alarm relay output
Dosing output
Input for external on/off switch
DDI, standard range 27Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU (Schuko) Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: AR version
Control
Dosing
headGaskets Valve balls
panel
position
DDI 60‐10 AR‐PP/E/C‐F‐3166F Front‐fitted 95703643 2,324
DDI 60‐10 AR‐PP/E/C‐S‐3166F Side‐fitted 96717438 2,113
DDI 60‐10 AR‐PVC/V/G‐F‐31B16FX Front‐fitted 96684758 2,277
DDI 60‐10 AR‐PVC/V/G‐S‐31B16FX Side‐fitted 96684739 2,065
DDI 60‐10 AR‐PVC/E/SS‐F‐31B16F Front‐fitted 96717328 2,230
DDI 60‐10 AR‐PVC/E/SS‐S‐31B16F Side‐fitted 96693916 2,018
DDI 60‐10 AR‐PV/T/T‐F‐31B3B3F Front‐fitted 96717336 2,504
DDI 60‐10 AR‐PV/T/T‐S‐31B3B3F Side‐fitted 96684743 2,293
DDI 60‐10 AR‐SS/T/SS‐F‐31AAFX Front‐fitted 95703644 2,814
DDI 60‐10 AR‐SS/T/SS‐S‐31AAFX Side‐fitted 96684801 2,602
DDI 150‐4 AR‐PP/E/C‐F‐31B4B4F Front‐fitted 95714557 2,673
DDI 150‐4 AR‐PP/E/C‐S‐31B4B4F Side‐fitted 95714556 2,461
DDI 150‐4 AR‐PVC/V/G‐F‐31B2B2FX Front‐fitted 96717309 2,538
DDI 150‐4 AR‐PVC/V/G‐S‐31B2B2FX Side‐fitted 96684629 2,327
DDI 150‐4 AR‐PVC/E/SS‐F‐31B2B2FX Front‐fitted 95726205 2,553
DDI 150‐4 AR‐PVC/E/SS‐S‐31B2B2FX Side‐fitted 95721376 2,314
DDI 150‐4 AR‐PV/T/T‐F‐31B4B4F Front‐fitted 96717230 3,218
DDI 150‐4 AR‐PV/T/T‐S‐31B4B4F Side‐fitted 96690314 3,007
DDI 150‐4 AR‐SS/T/SS‐F‐31A1A1FX Front‐fitted 95703646 3,691
DDI 150‐4 AR‐SS/T/SS‐S‐31A1A1FX Side‐fitted 95700356 3,480
Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU (Schuko) Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: AF version ‐ flow monitor
Control
Dosing
headGaskets Valve balls
panel
position
DDI 60‐10 AF‐PP/E/C‐F‐3166F Front‐fitted 95703647 3,021
DDI 60‐10 AF‐PP/E/C‐S‐3166F Side‐fitted 96694396 2,809
DDI 60‐10 AF‐PVC/V/G‐F‐31B16FX Front‐fitted 95703648 2,974
DDI 60‐10 AF‐PVC/V/G‐S‐31B16FX Side‐fitted 96684850 2,762
DDI 60‐10 AF‐PVC/T/C‐F‐31B16F Front‐fitted 96684869 3,059
DDI 60‐10 AF‐PVC/T/C‐S‐31B16F Side‐fitted 96684839 2,847
DDI 60‐10 AF‐PV/T/C‐F‐31B3B3F Front‐fitted 95720629 3,278
DDI 60‐10 AF‐PV/T/C‐S‐31B3B3F Side‐fitted 96684804 3,043
DDI 60‐10 AF‐SS/T/SS‐F‐31AAFX Front‐fitted 95703649 3,511
DDI 60‐10 AF‐SS/T/SS‐S‐31AAFX Side‐fitted 95700355 3,299
DDI 150‐4 AF‐PP/E/SS‐F‐31B4B4F Front‐fitted 95703650 3,280
DDI 150‐4 AF‐PP/E/SS‐S‐31B4B4F Side‐fitted 96684682 3,069
DDI 150‐4 AF‐PVC/V/G‐F‐31B2B2FX Front‐fitted 95703642 3,235
DDI 150‐4 AF‐PVC/V/G‐S‐31B2B2FX Side‐fitted 96684687 3,023
DDI 150‐4 AF‐PVC/E/C‐F‐31B2B2F Front‐fitted 95735923 3,297
DDI 150‐4 AF‐PVC/E/C‐S‐31B2B2F Side‐fitted 95731069 3,086
DDI 150‐4 AF‐PV/T/C‐F‐31B4B4F Front‐fitted 95707304 4,037
DDI 150‐4 AF‐PV/T/C‐S‐31B4B4F Side‐fitted 96684680 3,825
DDI 150‐4 AF‐SS/T/SS‐F‐31A1A1FX Front‐fitted 95703651 4,387
DDI 150‐4 AF‐SS/T/SS‐S‐31A1A1FX Side‐fitted 95700357 4,176
60 10
Max.
flow
[l/h]
Max.
pressure
[bar]
Product
number
FKM
PVDF PTFE
9/12 suction
6/12 discharge
PP
PVC
Materials
SS
CeramicEPDM
PVC PTFE Ceramic
PVC
PVDF16 mm fusion
weldPTFE
Ceramic
60 10
PTFE
Glass
EPDM
FKM
9/12
9/12 suction
6/12 discharge
PVC EPDM SS 1.44019/12 suction
6/12 discharge
Connection*
Ceramic
Rp 1/4
SS 1.4401
PTFE SS 1.4401
16 mm fusion
weld
PP
Glass
SS 1.4401SS
Price
PVDF PTFE Ceramic 25 mm fusion
13/20,
25 mm cement
PP EPDM
Ceramic
9/12 suction
6/12 discharge
9/12
FKM Glass
Rp 3/4
Glass
25 mm fusion
13/20,
25 mm cement
13/20,
25 mm cement
Price
SS 1.4401
EPDM
FKMPVC
PVC
150
25 mm fusionPTFE
25 mm fusion
PVC
Product
number
150 4
PVDF PTFE
SS PTFE
EPDM
Ceramic
SS 1.4401
Max.
flow
[l/h]
Max.
pressure
[bar]
Materials
PTFE
PP
Type designation
Rp 1/4
Connection* Type designation
4
SS PTFE
13/20,
25 mm cementPVC EPDM
SS 1.4401 Rp 3/4
DDI, standard range 28Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU (Schuko) Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: AP version ‐ PROFIBUS
Control
Dosing
headGaskets Valve balls
panel
position
DDI 60‐10 AP‐PP/E/C‐F‐3166F Front‐fitted 95722511 3,094
DDI 60‐10 AP‐PP/E/C‐S‐3166F Side‐fitted 95726120 2,889
DDI 60‐10 AP‐PVC/V/G‐F‐31B16F Front‐fitted 96684773 2,976
DDI 60‐10 AP‐PVC/V/G‐S‐31B16F Side‐fitted 96684714 2,771
DDI 60‐10 AP‐PVC/T/C‐F‐31B16F Front‐fitted 95713075 3,108
DDI 60‐10 AP‐PVC/T/C‐S‐31B16F Side‐fitted 95702862 2,902
Front‐fitted
DDI 60‐10 AP‐PV/T/T‐S‐31B3B3F Side‐fitted 95706967 3,099
DDI 60‐10 AP‐SS/T/SS‐F‐31AAF Front‐fitted 95727330 3,538
DDI 60‐10 AP‐SS/T/SS‐S‐31AAF Side‐fitted 96684780 3,308
Front‐fitted
DDI 150‐4 AP‐PP/E/C‐S‐31B4B4F Side‐fitted 95726469 3,238
DDI 150‐4 AP‐PVC/T/C‐F‐31B2B2F Front‐fitted 95712818 3,444
DDI 150‐4 AP‐PVC/T/C‐S‐31B2B2F Side‐fitted 95710039 3,239
Front‐fitted
DDI 150‐4 AP‐PV/T/T‐S‐31B4B4F Side‐fitted 96684620 3,759
Front‐fitted
DDI 150‐4 AP‐SS/T/SS‐S‐31A1A1F Side‐fitted 96684640 4,186
Power supply: 1 x 100‐240 V, 50/60 Hz (switch mode)Mains plug: EU (Schuko) Materials: other material variations available on requestValves: Standard (spring loaded valves on request)Controls: APF version ‐ AR version with flow monitor and PROFIBUS
Control
Dosing
headGaskets Valve balls
panel
position
Front‐fitted
DDI 60‐10 APF‐PP/E/C‐S‐3166F Side‐fitted 95705503 3,562
DDI 60‐10 APF‐PVC/V/G‐F‐31B16F Front‐fitted 95735830 3,697
DDI 60‐10 APF‐PVC/V/G‐S‐31B16F Side‐fitted 96717439 3,468
Front‐fitted
DDI 60‐10 APF‐PVC/T/C‐S‐31B16F Side‐fitted 95701954 3,599
DDI 60‐10 APF‐PV/T/C‐F‐31B3B3F Front‐fitted 95735121 4,025
DDI 60‐10 APF‐PV/T/C‐S‐31B3B3F Side‐fitted 96684870 3,795
Front‐fitted
DDI 60‐10 APF‐SS/T/SS‐S‐31AAF Side‐fitted 95710966 4,005
Front‐fitted
DDI 150‐4 APF‐PP/E/SS‐S‐31B4B4FX Side‐fitted 95731384 3,891
Front‐fitted
DDI 150‐4 APF‐PVC/V/G‐S‐31B2B2FX Side‐fitted 95729237 3,771
DDI 150‐4 APF‐PVC/E/SS‐F‐31B2B2F Front‐fitted 95733347 3,949
DDI 150‐4 APF‐PVC/E/SS‐S‐31B2B2F Side‐fitted 96684696 3,721
Front‐fitted
DDI 150‐4 APF‐PV/T/C‐S‐31B4B4F Side‐fitted 95704772 4,577
Front‐fitted
DDI 150‐4 APF‐SS/T/SS‐S‐31A1A1F Side‐fitted 95713090 4,882Rp 3/4
SS 1.440113/20,
25 mm cement
Ceramic 25 mm fusion
SS 1.4401 25 mm fusion
Glass13/20,
25 mm cement
SS 1.4401
150 4
PP EPDM
PVC FKM
PVC EPDM
PVDF PTFE
SS PTFE
60 10
PP EPDM
PVC Ceramic
SS PTFE SS 1.4401
PTFE
FKMPVC
Ceramic 9/12 mm
Glass
PTFE 25 mm fusion
Rp 1/4
PVDF PTFE Ceramic16 mm fusion
weld
9/12 suction
6/12 discharge
9/12 suction
6/12 discharge
SS 1.4401
PVDF PTFE
Type designationProduct
numberPrice
150 4
PP EPDM
Max.
flow
[l/h]
PTFE Ceramic13/20,
25 mm cement
SS 1.4401 Rp 3/4SS PTFE
Ceramic
FKM Glass9/12 suction
6/12 discharge
Ceramic 9/12
60 10
PP
PTFE
Max.
pressure
[bar]
Max.
flow
[l/h]
Max.
pressure
[bar]
Type designationProduct
number
9/12 suction
6/12 discharge
Price
PTFE
SS PTFE SS 1.4401 Rp 1/4
Materials
Connection*
PVDF PTFE
25 mm fusion
PVC
EPDM
PVC
PVC
16 mm fusion
weld
Materials
Connection*
DDI cables and plugs 29
2 96609014 27
5 96609016 32
plug only 96698715 23
Angled 2 96693246 40
2 96609017 27
5 96609019 32
plug only 96696198 23
Angled 2 96698716 40
2 96632921 27
5 96632922 32
plug only 96609031 23
Angled 2 96699697 40
96645265 226
96698715 23
96679388 15
96630345 23
96635010 65
Profibus ‐ 96693735 295
Profibus ‐ 96693737 44
96698717 15
Input
OutputEmpty relay (stroke or
pre‐empty relay)
Plug
connector
Product
numberApplication Type Coding
Straight/
AngledPrice
Cable
length
Number of
pins
‐
3
‐
‐
Square type
A Straight
Output
Pre‐
assembled
plug
connector
with 2 m of
analogue out
cable
Input
Input (pre‐) emptyFlat plug
connector
Input Empty
Plug
connector
Flat plug
connector2 Square type Straight (cable soldered)
Adaptor
flat‐round(pre‐) empty
Straight (cable soldered)
StraightAnalogue
Plug
connector5
A
A
4 AStraight
4 BStraight
Plug
connector
Analogue/pulse and
remote switching
Flow monitor
signal in
Analogue feedback
out
3 DIN 43650 Angled
Terminating resistor
Solenoid
valve
connector
Mains 110‐240 VAC
Y connector
(pre‐) empty 4 Straight
Combined 5 A Straight 2
‐
‐
Plug
connector4
DMX, Technical Data and Options 30
Dosing flow < + 1.5%. Linearity < + 4%
Dosing flow adjustment Manual by stroke length adjustment between 10‐100%
(options on request)
Option: motor frequency control (inverter by others)
According to size of dosing head up to 3 m water column
Dosing diaphragm PTFE coated
Dosing head and valves
Heating/cooling flange, only for st. steel headed versions, 80 Degs C, 1 bar pressure max.
Special valves for abrasive chemicals (such as lime slurry)
Integrated sensor for diaphragm leakage indication
Integrated pressure relief valve (PVC/PVDF)
110‐115V, single phase
II 2G EEx e II T3 (capacities marked*)
II 2GD EEx de II CT4 (capacities marked*)
11 2GD EEx de II CT4, PTC (capacities marked*)
NEMA 56C
IEC B5, frame size 63 (pump size dependant)
IEC B5, frame size 71 (pump size dependant)
Enclosure with built in inductive stroke sensor
DMX, standard range
Power supply: 380‐415 V, 3PH, 50 Hz,
Materials
Dosing Gaskets Valve balls
PP E T 6/12 DMX 4‐10 B‐PP/E/T‐X‐E1C6C6 95703666981
PVC V G 6/12 DMX 4‐10 B‐PVC/V/G‐X‐E1B1B1 96684148 977
SS T SS Rp 1/4 DMX 4‐10 B‐SS/T/SS‐X‐E1AA 96716307 1,456
PP E T 6/12 DMX 7,2‐16 B‐PP/E/T‐X‐E1C6C6 95703667 1,038
PVC V G 6/12 DMX 7,2‐16 B‐PVC/V/G‐X‐E1B1B1 96684394 1,029
SS T SS Rp 1/4 DMX 7,2‐16 B‐SS/T/SS‐X‐E1AA 96716775 1,494
PP E T 6/12 DMX 8‐10 B‐PP/E/T‐X‐E1C6C6 95700361 977
PVC V G 6/12 DMX 8‐10 B‐PVC/V/G‐X‐E1B1B1 96684528 972
SS T SS Rp 1/4 DMX 8‐10 B‐SS/T/SS‐X‐E1AA 96717092 1,452
PP E T 6/12 DMX 13,7‐16 B‐PP/E/T‐X‐E1C6C6 95703668 1,004
PVC V G 6/12 DMX 13,7‐16 B‐PVC/V/G‐X‐E1B1B1 96683618 994
SS T SS Rp 1/4 DMX 13,7‐16 B‐SS/T/SS‐X‐E1AA 96683629 1,460
PP E T 6/12 DMX 16‐10 B‐PP/E/T‐X‐E1C6C6 95700363 942
PVC V G 6/12 DMX 16‐10 B‐PVC/V/G‐X‐E1B1B1 96611960 938
SS T SS Rp 1/4 DMX 16‐10 B‐SS/T/SS‐X‐E1AA 96683744 1,418
PP E T 6/12 DMX 27‐10 B‐PP/E/T‐X‐E1C6C6 95700364 947
PVC V G 6/12 DMX 27‐10 B‐PVC/V/G‐X‐E1B1B1 96648142 943
SS T SS Rp 1/4 DMX 27‐10 B‐SS/T/SS‐X‐E1AA 96715842 1,423
PP E T 6/12 DMX 35‐10 B‐PP/E/T‐X‐E1B3B3 96716065 1,072
PVC V G 6/12 DMX 35‐10 B‐PVC/V/G‐X‐E1B1B1 96650928 1,012
SS T SS Rp 1/4 DMX 35‐10 B‐SS/T/SS‐X‐E1AA 96684076 1,491
PP E T 6/12 DMX 50‐10 B‐PP/E/T‐X‐E1C6C6 96716371 1,064
PVC V G 6/12 DMX 50‐10 B‐PVC/V/G‐X‐E1B1B1 96611961 1,060
SS T SS Rp 1/4 DMX 50‐10 B‐SS/T/SS‐X‐E1AA 96684272 1,539
PP E T 19/27 DMX 75‐4 B‐PP/E/T‐X‐E1B9B9 96293595 1,377
PVC V G 13/20 DMX 75‐4 B‐PVC/V/G‐X‐E1B2B2 96652050 1,319
SS T SS Rp 3/4 DMX 75‐4 B‐SS/T/SS‐X‐E1A1A1 96684507 2,136
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐E1B9B9 96293597 1,527
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐E1B2B2 96611663 1,469
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐E1A1A1 96683528 2,309
Power supply: 230 V, 1PH, 50 Hz 31
35 10
Accuracy
Suction height
Parts in contact with chemicals
Head and valve options
(on request)
Motor options
(on request)
Stroke sensor (on request)
16
4 10
7.2
Max.
flow
Max.
pressure
27 10
10
13.7
8
16 10
50
115
75
Option:
3
10
4
electronic stroke frequency control from 4‐20 mA on request (Etron Profi)
contact input with multiplier and divider, with memory function
two‐step tank empty signal, remote on/off
Type
designation
Product
number
16
PriceConnections
Materials
Dosing Gaskets Valve balls
PP E T 6/12 DMX 7,2‐16 B‐PP/E/T‐X‐G1C6C6X 957036931,179
PVC V G 6/12 DMX 7,2‐16 B‐PVC/V/G‐X‐G1B1B1X 96716760 1,170
SS T SS Rp 1/4 DMX 7,2‐16 B‐SS/T/SS‐X‐G1AAX 95703694 1,636
PP E T 6/12 DMX 8‐10 B‐PP/E/T‐X‐G1C6C6X 95703695 1,118
PVC V G 6/12 DMX 8‐10 B‐PVC/V/G‐X‐G1B1B1X 96717057 1,114
SS T SS Rp 1/4 DMX 8‐10 B‐SS/T/SS‐X‐G1AAX 96717100 1,593
PP E T 6/12 DMX 13,7‐16 B‐PP/E/T‐X‐G1C6C6X 95703696 1,146
PVC V G 6/12 DMX 13,7‐16 B‐PVC/V/G‐X‐G1B1B1X 96683624 1,135
SS T SS Rp 1/4 DMX 13,7‐16 B‐SS/T/SS‐X‐G1AAX 95703697 1,601
PP E T 6/12 DMX 16‐10 B‐PP/E/T‐X‐G1C6C6X 95703698 1,083
PVC V G 6/12 DMX 16‐10 B‐PVC/V/G‐X‐G1B1B1X 96683711 1,079
SS T SS Rp 1/4 DMX 16‐10 B‐SS/T/SS‐X‐G1AAX 95703699 1,559
PP E T 6/12 DMX 27‐10 B‐PP/E/T‐X‐G1C6C6X 95703700 1,089
PVC V G 6/12 DMX 27‐10 B‐PVC/V/G‐X‐G1B1B1X 96683925 1,084
SS T SS Rp 1/4 DMX 27‐10 B‐SS/T/SS‐X‐G1AAX 95703701 1,564
PP E T 6/12 DMX 35‐10 B‐PP/E/T‐X‐G1C6C6X 95703702 1,157
PVC V G 6/12 DMX 35‐10 B‐PVC/V/G‐X‐G1B1B1X 96684047 1,153
SS T SS Rp 1/4 DMX 35‐10 B‐SS/T/SS‐X‐G1AAX 95703703 1,633
PP E T 6/12 DMX 50‐10 B‐PP/E/T‐X‐G1C6C6X 95703704 1,206
PVC V G 6/12 DMX 50‐10 B‐PVC/V/G‐X‐G1B1B1X 96684204 1,201
SS T SS Rp 1/4 DMX 50‐10 B‐SS/T/SS‐X‐G1AAX 95703705 1,681
PP E T 19/27 DMX 75‐4 B‐PP/E/T‐X‐G1B9B9X 95703706 1,519
PVC V G 13/20 DMX 75‐4 B‐PVC/V/G‐X‐G1B2B2X 96684457 1,461
SS T SS Rp 3/4 DMX 75‐4 B‐SS/T/SS‐X‐G1A1A1X 96716998 2,278
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐G1B9B9X 95703707 1,669
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐G1B2B2X 96683483 1,610
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐G1A1A1X 95703708 2,450
Power supply: 230/380‐415 V, 3 PH, 50 Hz, fitted with PTC thermistors suitable for AC inverter controlMaterials
Dosing Gaskets Valve balls
PP E T 6/12 DMX 7,2‐16 B‐PP/E/T‐X‐E1C6C6E0 957037131,171
PVC V G 6/12 DMX 7,2‐16 B‐PVC/V/G‐X‐E1B1B1E0 95703714 1,161
SS T SS Rp 1/4 DMX 7,2‐16 B‐SS/T/SS‐X‐E1AAE0 95703529 1,627
PP E T 6/12 DMX 8‐10 B‐PP/E/T‐X‐E1C6C6E0 95703715 1,109
PVC V G 6/12 DMX 8‐10 B‐PVC/V/G‐X‐E1B1B1E0 96684529 1,105
SS T SS Rp 1/4 DMX 8‐10 B‐SS/T/SS‐X‐E1AAE0 95703716 1,585
PP E T 6/12 DMX 13,7‐16 B‐PP/E/T‐X‐E1C6C6E0 95703717 1,137
PVC V G 6/12 DMX 13,7‐16 B‐PVC/V/G‐X‐E1B1B1E0 96683627 1,127
SS T SS Rp 1/4 DMX 13,7‐16 B‐SS/T/SS‐X‐E1AAE0 95703530 1,593
PP E T 6/12 DMX 16‐10 B‐PP/E/T‐X‐E1C6C6E0 95703718 1,075
PVC V G 6/12 DMX 16‐10 B‐PVC/V/G‐X‐E1B1B1E0 96683707 1,070
SS T SS Rp 1/4 DMX 16‐10 B‐SS/T/SS‐X‐E1AA 95701447 1,550
PP E T 6/12 DMX 27‐10 B‐PP/E/T‐X‐E1C6C6E0 95703719 1,080
PVC V G 6/12 DMX 27‐10 B‐PVC/V/G‐X‐E1B1B1E0 96636328 1,075
SS T SS Rp 1/4 DMX 27‐10 B‐SS/T/SS‐X‐E1AAE0 95703720 1,555
PP E T 6/12 DMX 35‐10 B‐PP/E/T‐X‐E1C6C6E0 95703721 1,149
PVC V G 6/12 DMX 35‐10 B‐PVC/V/G‐X‐E1B1B1E0 96684061 1,144
SS T SS Rp 1/4 DMX 35‐10 B‐SS/T/SS‐X‐E1AAE0 95703722 1,624
PP E T 6/12 DMX 50‐10 B‐PP/E/T‐X‐E1C6C6E0 95703723 1,337
PVC V G 6/12 DMX 50‐10 B‐PVC/V/G‐X‐E1B1B1E0 96684214 1,333
PP E T 19/27 DMX 75‐4 B‐PP/E/T‐X‐E1B9B9E0 95703724 1,651
PVC V G 13/20 DMX 75‐4 B‐PVC/V/G‐X‐E1B2B2E0 96684495 1,592
SS T SS Rp 3/4 DMX 75‐4 B‐SS/T/SS‐X‐E1A1A1E0 96716995 2,409
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐E1B9B9E0 95701494 1,800
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐E1B2B2E0 96683503 1,741
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐E1A1A1E0 95703725 2,582
35
50
8
13.7
16
27
7.2
Max.
flow
[l/h]
Product
numberPrice
4
8
ConnectionsType
designation
16
Product
numberPrice
Type
designation
Max.
flow
75
115
Max.
pressure
[bar]
16
16
115 3
75 4
35 10
50 10
27 10
10
13.7 16
10
10
10
7.2
10
ConnectionsMax.
pressure
16
3
10
10
DMX, Technical Data and Options 32
Dosing flow < + 1.5%. Linearity < + 4%
Manual by stroke length adjustment between 10‐100%
Option: automatic stroke length adjustment via servomotor (capacities marked*)
Option: motor frequency control (inverter by others)
According to size of dosing head up to 3 m water column
Dosing diaphragm PTFE coated
Dosing head and valves
Heating/cooling flange, only for st. steel headed versions, 80 Degs C, 1 bar pressure max.
Special valves for abrasive chemicals (such as lime slurry)
Integrated sensor for diaphragm leakage indication
Integrated pressure relief valve (PVC/PVDF)
110‐115V, single phase
II 2G EEx e II T3 (capacities marked*)
II 2GD EEx de II CT4 (capacities marked*)
11 2GD EEx de II CT4, PTC (capacities marked*)
NEMA motor specification or motor flange
IEC standard motor flanges
Enclosure with built in inductive stroke sensor
With 1000 Ohm feedback potentiometer
With 4‐20 mA input, with switch for manual adjustment ON/OFF
Different voltages and version for flameproof applications
Power supply: 380‐415 V, 3PH, 50 Hz,
Dosing
headGaskets Valve balls
PP T T 19/27 DMX 67‐10 ‐PP/T/T‐X‐E144 95706799 2,293
PVC V G 13/20 DMX 67‐10 ‐PVC/V/G‐X‐E122 96686029 2,117
SS T SS Rp 3/4 DMX 67‐10 ‐SS/T/SS‐X‐E1A1A1 96720407 2,964
PVC V G 13/20 DMX 100‐8 ‐PVC/V/G‐X‐E122 96717563 1,837
SS T SS Rp 3/4 DMX 100‐8 ‐SS/T/SS‐X‐E1A1A1 96684911 2,681
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐E1B9B9 96293597 1,527
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐E1B2B2 96611663 1,469
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐E1A1A1 96683528 2,309
PP T T 19/27 DMX 132‐10 ‐PP/T/T‐X‐E144 95702294 2,276
PVC V G 13/20 DMX 132‐10 ‐PVC/V/G‐X‐E122 96653457 2,100
SS T SS Rp 3/4 DMX 132‐10 ‐SS/T/SS‐X‐E1A1A1 96690320 2,946
PVC V G 13/20 DMX 160‐5 ‐PVC/V/G‐X‐E122 96633150 1,867
SS T SS Rp 3/4 DMX 160‐5 ‐SS/T/SS‐X‐E1A1A1 96685170 2,755
PP T T 19/27 DMX 321‐6 ‐PP/T/T‐X‐E144 96719413 2,385
PVC V G 19/27 DMX 321‐6 ‐PVC/V/G‐X‐E199 96607455 2,166
SS T SS Rp 3/4 DMX 321‐6 ‐SS/T/SS‐X‐E1A1A1 96685646 3,165
PP E T 2" DMX 525‐3 ‐PP/E/T‐X‐E1XX 95700371 2,517
PVC V G 1 1/4" DMX 525‐3 ‐PVC/V/G‐X‐E1XX 95700372 2,434
SS T SS Rp 1 1/4" DMX 525‐3 ‐SS/T/SS‐X‐E1A2A2 96685949 3,953
PP E T 2" DMX 765‐3 ‐PP/E/T‐X‐E1XX 95700373 2,517
PVC V G 1 1/4" DMX 765‐3 ‐PVC/V/G‐X‐E1XX 95700374 2,434
SS T SS Rp 1 1/4" DMX 765‐3 ‐SS/T/SS‐X‐E1A2A2 96720561 3,953
3
67 10
100* 8
115 3
132 10
765 3
Accuracy
Dosing flow adjustment
(options on request)
Option: electronic stroke frequency control from 4‐20 mA on request (Etron Profi)
contact input with multiplier and divider, with memory function
two‐step tank empty signal, remote on/off
Suction height
Parts in contact with chemicals
ConnectionsType
designation
Product
numberPrice
Head and valve options
(on request)
Motor options
(on request)
Stroke sensor (on request)
Servomotor (on request)
Materials
160 5
321 6
525
Power supply: 230 V, 1PH, 50 Hz33
Dosing
headGaskets Valve balls
PP E T 19/27 DMX 67‐8 B‐PP/E/T‐X‐G1B9B9X 95703743 2,291
PVC V G 13/20 DMX 67‐8 B‐PVC/V/G‐X‐G1B2B2X 96720410 2,253
SS T SS Rp 3/4 DMX 67‐8 B‐SS/T/SS‐X‐G1A1A1X 95703744 3,100
PP E T 19/27 DMX 100‐8 B‐PP/E/T‐X‐G1B9B9X 95703745 2,078
PVC V G 13/20 DMX 100‐8 B‐PVC/V/G‐X‐G1B2B2X 96717533 2,029
SS T SS Rp 3/4 DMX 100‐8 B‐SS/T/SS‐X‐G1A1A1X 95703746 2,872
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐G1B9B9X 95703707 1,669
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐G1B2B2X 96683483 1,610
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐G1A1A1X 95703708 2,450
PP E T 19/27 DMX 132‐8 B‐PP/E/T‐X‐G1B9B9X 95703747 2,273
PVC V G 13/20 DMX 132‐8 B‐PVC/V/G‐X‐G1B2B2X 96684994 2,236
SS T SS Rp 3/4 DMX 132‐8 B‐SS/T/SS‐X‐G1A1A1X 95703748 3,082
PP E T 19/27 DMX 160‐5 B‐PP/E/T‐X‐G1B9B9X 95703749 2,108
PVC V G 13/20 DMX 160‐5 B‐PVC/V/G‐X‐G1B2B2X 96685152 2,059
SS T SS Rp 3/4 DMX 160‐5 B‐SS/T/SS‐X‐G1A1A1X 95703750 2,946
PP E T 19/27 DMX 321‐4 B‐PP/E/T‐X‐G1B9B9X 95703751 2,382
PVC V G 19/27 DMX 321‐4 B‐PVC/V/G‐X‐G1B9B9X 96685627 2,302
SS T SS Rp 3/4 DMX 321‐4 B‐SS/T/SS‐X‐G1A1A1X 95703752 3,302
PP E T 2" DMX 525‐3 B‐PP/E/T‐X‐G1XXX 95703753 2,653
PVC V G 1 1/4" DMX 525‐3 B‐PVC/V/G‐X‐G1XXX 95703754 2,571
SS T SS Rp 1 1/4" DMX 525‐3 B‐SS/T/SS‐X‐G1A2A2X 95703755 4,089
Power supply: 230/380‐415 V, 3 PH, 50 Hz, fitted with PTC thermistors suitable for AC inverter control
Dosing
headGaskets Valve balls
PP E T 19/27 DMX 67‐10 B‐PP/E/T‐X‐E1B9B9E0 95703727 2,296
PVC V G 13/20 DMX 67‐10 B‐PVC/V/G‐X‐E1B2B2E0 96686040 2,259
SS T SS Rp 3/4 DMX 67‐10 B‐SS/T/SS‐X‐E1A1A1E0 95703731 3,105
PP E T 19/27 DMX 100‐8 B‐PP/E/T‐X‐E1B9B9E0 96620285 2,099
PVC V G 13/20 DMX 100‐8 B‐PVC/V/G‐X‐E1B2B2E0 96684886 2,049
SS T SS Rp 3/4 DMX 100‐8 B‐SS/T/SS‐X‐E1A1A1E0 96659301 2,893
PP E T 19/27 DMX 115‐3 B‐PP/E/T‐X‐E1B9B9E0 95701494 1,800
PVC V G 13/20 DMX 115‐3 B‐PVC/V/G‐X‐E1B2B2E0 96683503 1,741
SS T SS Rp 3/4 DMX 115‐3 B‐SS/T/SS‐X‐E1A1A1E0 95703725 2,582
PP E T 19/27 DMX 132‐10 B‐PP/E/T‐X‐E1B9B9E0 95703732 2,278
PVC V G 13/20 DMX 132‐10 B‐PVC/V/G‐X‐E1B2B2E0 96685002 2,241
SS T SS Rp 3/4 DMX 132‐10 B‐SS/T/SS‐X‐E1A1A1E0 95703733 3,087
PP E T 19/27 DMX 160‐5 B‐PP/E/T‐X‐E1B9B9E0 96718348 2,128
PVC V G 13/20 DMX 160‐5 B‐PVC/V/G‐X‐E1B2B2E0 96685166 2,079
SS T SS Rp 3/4 DMX 160‐5 B‐SS/T/SS‐X‐E1A1A1E0 95703734 2,968
PP E T 19/27 DMX 321‐6 B‐PP/E/T‐X‐E1B9B9E0 96635074 2,387
PVC V G 19/27 DMX 321‐6 B‐PVC/V/G‐X‐E1B9B9E0 96685626 2,306
SS T SS Rp 3/4 DMX 321‐6 B‐SS/T/SS‐X‐E1A1A1E0 96685647 3,306
PP E T 32 mm DMX 525‐3 B‐PP/E/T‐X‐E1XXE0 95703735 2,658
PVC V G 1 1/4" DMX 525‐3 B‐PVC/V/G‐X‐E1XXE0 95703736 2,575
SS T SS Rp 1/4" DMX 525‐3 B‐SS/T/SS‐X‐E1A2A2E0 95703737 4,094
PP E T 32 mm DMX 765‐3 B‐PP/E/T‐X‐E1XXE0 95703738 2,658
PVC V G 1 1/4" DMX 765‐3 B‐PVC/V/G‐X‐E1XXE0 95703739 2,575
SS T SS Rp 1/4" DMX 765‐3 B‐SS/T/SS‐X‐E1A2A2E0 95703740 4,094
765* 3
160* 5
100* 8
Materials
ConnectionsType
designation
160* 5
321* 6
525* 3
67 10
100* 8
115 3
132* 10
Product
numberPrice
321* 4
525* 3
Max.
flow
[l/h]
Max.
pressure
[bar]
Type
designation
Product
numberPrice
67 8
115 3
132* 8
Max.
flow
[l/h]
Max.
pressure
[bar]
Materials
Connections
DMX, Duplex headed 34
Power supply: 230/380‐415 V, 3 PH, 50 Hz
Dosing
headGaskets Valve balls
PP E T 19/27 DMX 67‐10/2 B‐PP/E/T‐X‐E1B9B9 95703756 3,108
PVC V G 13/20 DMX 67‐10/2 B‐PVC/V/G‐X‐E1B2B2 96686023 3,032
SS V SS Rp 3/4" DMX 67‐10/2 B‐SS/V/SS‐X‐E1A1A1 96720357 4,423
PP E T 19/27 DMX 100‐8/2 B‐PP/E/T‐X‐E1B9B9 96737198 2,686
PVC V G 13/20 DMX 100‐8/2 B‐PVC/V/G‐X‐E1B2B2 96684881 2,587
SS V SS Rp 3/4" DMX 100‐8/2 B‐SS/V/SS‐X‐E1A1A1 96717480 3,952
PP E T 19/27 DMX 132‐10/2 B‐PP/E/T‐X‐E1B9B9 95703757 3,090
PVC V G 13/20 DMX 132‐10/2 B‐PVC/V/G‐X‐E1B2B2 96684982 3,015
SS V SS Rp 3/4" DMX 132‐10/2 B‐SS/V/SS‐X‐E1A1A1 96717783 4,405
PP E T 19/27 DMX 160‐5/2 B‐PP/E/T‐X‐E1B9B9 95703760 2,746
PVC V G 13/20 DMX 160‐5/2 B‐PVC/V/G‐X‐E1B2B2 96685132 2,647
SS V SS Rp 3/4" DMX 160‐5/2 B‐SS/V/SS‐X‐E1A1A1 96718236 4,101
PP E T 19/27 DMX 321‐6/2 B‐PP/E/T‐X‐E1B9B9 96719398 3,308
PVC V G 19/27 DMX 321‐6/2 B‐PVC/V/G‐X‐E1B9B9 96685603 3,146
SS V SS Rp 3/4" DMX 321‐6/2 B‐SS/V/SS‐X‐E1A1A1 96719391 4,844
PP E T 2" DMX 525‐3/2 B‐PP/E/T‐X‐E1XX 95703758 3,849
PVC V G 1 1/4" DMX 525‐3/2 B‐PVC/V/G‐X‐E1KK 96690338 3,757
SS V SS Rp 1 1/4" DMX 525‐3/2 B‐SS/V/SS‐X‐E1A2A2 96611637 6,360
PP E T 2" DMX 765‐3/2 B‐PP/E/T‐X‐E1XX 95703759 3,849
PVC V G 1 1/4" DMX 765‐3/2 B‐PVC/V/G‐X‐E1KK 96686073 3,757
SS V SS Rp 1 1/4" DMX 765‐3/2 B‐SS/V/SS‐X‐E1A2A2 96720497 6,360
DMX, Duplex headed
Power supply: 230/380‐415 V, 3 PH, 50 Hz, fitted with PTC thermistors suitable for AC inverter control
Dosing
headGaskets Valve balls
PP E T 19/27 DMX 67‐10/2 B‐PP/E/T‐X‐E1B9B9 95703762 3,248
PVC V G 13/20 DMX 67‐10/2 B‐PVC/V/G‐X‐E1B2B2 96720354 3,173
SS V SS Rp 3/4" DMX 67‐10/2 B‐SS/V/SS‐X‐E1A1A1 95703763 4,564
PP E T 19/27 DMX 100‐8/2 B‐PP/E/T‐X‐E1B9B9 95703764 2,899
PVC V G 13/20 DMX 100‐8/2 B‐PVC/V/G‐X‐E1B2B2 95703765 2,800
SS V SS Rp 3/4" DMX 100‐8/2 B‐SS/V/SS‐X‐E1A1A1 95703766 4,165
PP E T 19/27 DMX 132‐10/2 B‐PP/E/T‐X‐E1B9B9 95703767 3,231
PVC V G 13/20 DMX 132‐10/2 B‐PVC/V/G‐X‐E1B2B2 96717739 3,155
SS V SS Rp 3/4" DMX 132‐10/2 B‐SS/V/SS‐X‐E1A1A1 95703768 4,546
PP E T 19/27 DMX 160‐5/2 B‐PP/E/T‐X‐E1B9B9 95703769 2,958
PVC V G 13/20 DMX 160‐5/2 B‐PVC/V/G‐X‐E1B2B2 95703770 2,859
SS V SS Rp 3/4" DMX 160‐5/2 B‐SS/V/SS‐X‐E1A1A1 95703771 4,313
PP E T 19/27 DMX 321‐6/2 B‐PP/E/T‐X‐E1B9B9 95703772 3,449
PVC V G 19/27 DMX 321‐6/2 B‐PVC/V/G‐X‐E1B9B9 96719380 3,286
SS V SS Rp 3/4" DMX 321‐6/2 B‐SS/V/SS‐X‐E1A1A1 96685610 4,985
PP E T 2" DMX 525‐3/2 B‐PP/E/T‐X‐E1XX 95703773 3,990
PVC V G 1 1/4" DMX 525‐3/2 B‐PVC/V/G‐X‐E1KK 96685893 3,898
SS V SS Rp 1 1/4" DMX 525‐3/2 B‐SS/V/SS‐X‐E1A2A2 95703761 6,501
PP E T 2" DMX 765‐3/2 B‐PP/E/T‐X‐E1XX 95703774 3,990
PVC V G 1 1/4" DMX 765‐3/2 B‐PVC/V/G‐X‐E1KK 96720486 3,898
SS V SS Rp 1 1/4" DMX 765‐3/2 B‐SS/V/SS‐X‐E1A2A2 95703775 6,501
2 x 321* 6
2 x 525* 3
2 x 765* 3
2 x 100* 8
2 x 132* 10
2 x 160* 5
Materials
ConnectionsType
designation
Product
numberPrice
2 x 67* 10
2 x 525* 3
2 x 765* 3
Max.
flow
[l/h]
Max.
pressure
[bar]
2 x 132* 10
2 x 160* 5
2 x 321* 6
Type
designation
Product
numberPrice
2 x 67* 10
2 x 100* 8
Max.
flow
[l/h]
Max.
pressure
[bar]
Materials
Connections
DMX, standard range 35
Power supply: 380‐415 V, 3PH, 50 Hz,Simplex headed
Head Size Motor
kW
430 at 50 Hz 5 1 1.5
860 at 50 Hz 5 1 1.5
1120 at 50 Hz 5 1 1.5
770 at 50 Hz 3 2 1.5
1520 at 50 Hz 3 2 1.5
2000 at 50 Hz 3 2 1.5
860 at 100 Hz 5 1 1.5 POA
1120 at 100 Hz 5 1 1.5
2240 at 100 Hz 5 1 1.5
1520 at 100 Hz 3 2 1.5
3040 at 100 Hz 3 2 1.5
4000 at 100 Hz 3 2 1.5
380‐415 V, 3PH, 50 Hz,
Head Size Motor
kW
2 x 430 at 50 Hz 5 1 2.2
2 x 860 at 50 Hz 5 1 2.2
2 x 1120 at 50 Hz 5 1 2.2
2 x 770 at 50 Hz 3 2 2.2
2 x 1520 at 50 Hz 3 2 2.2
2 x 2000 at 50 Hz 3 2 2.2
2 x 860 at 100 Hz 5 1 2.2 POA
2 x 1120 at 100 Hz 5 1 2.2
2 x 2240 at 100 Hz 5 1 2.2
2 x 1520 at 100 Hz 3 2 2.2
2 x 3040 at 100 Hz 3 2 2.2
2 x 4000 at 100 Hz 3 2 2.2
Max.
flow
[l/h]
MaterialsProduct
number
Product
numberPrice
Max.
pressure
[bar]
See material options above
See material options above
Price
Max.
flow
[l/h]
Max.
pressure
[bar]
Materials
DMH, Technical Data and Options 36
Dosing flow < + 1.5%. Linearity < + 2%
Manual by stroke length adjustment between 10‐100%
Option: automatic stroke length adjustment via servomotor (electric or pneGrundfos Dosing
Option: motor frequency control (inverter by others)
Max. 1 m water column, flooded suction for pumps with stroke number (n/min) of > 75
Enclosure: aluminium, dosing diaphragm: PTFE
for dosing head and valves please see the respective table
Available in DUPLEX twin headed version
Dosing head with electrical heating, only for stainless steel version
Heating/cooling flange, only for stainless steel version, 80 degs C max, 1 bar
Integrated sensor for diaphragm leakage indication
Integrated sensor for diaphragm leakage indication
3 AC, 220‐240/380‐440 V, 50/60 Hz, 440‐480 V, 60 Hz, IP65/F, PTC thermistor
Flameproof motors for simplex and duplex pumps, with ATEX 94/9/EC certificate
Motor kits NEMA and IEC sizes
Enclosure with built in inductive stroke sensor
With 1000 Ohm feedback potentiometer
With 4‐20 mA input, with switch for manual adjustment ON/OFF
Different voltages and version for flameproof applications
DMH, standard range380‐415 V. 3PH. 50 Hz.
Dosing
headGaskets Valve balls
PP EPDM Ceramic tube 6/9 DMH 5.0‐10 B‐PP/E/T‐X‐E144 96293623 1,817
PVC Viton Glass tube 6/12 DMH 5.0‐10 B‐PVC/V/G‐X‐E1B1B1 96722524 1,733
SS PTFE SS 1/4" BSPf DMH 5.0‐10 B‐SS/T/SS‐X‐E1AA 96701570 2,288
PP EPDM PTFE tube 6/9 DMH 13‐10 B‐PP/E/T‐X‐E144 96293625 1,815
PVC Viton Glass tube 6/12 DMH 13‐10 B‐PVC/V/G‐X‐E1B1B1 96686294 1,731
SS PTFE SS 1/4" BSPf DMH 13‐10 B‐SS/T/SS‐X‐E1AA 96721326 2,286
PP EPDM PTFE tube 6/9 DMH 24‐10 B‐PP/E/T‐X‐E144 96293627 1,815
PVC Viton Glass tube 6/12 DMH 24‐10 B‐PVC/V/G‐X‐E1B1B1 96722194 1,731
SS PTFE SS 1/4" BSPf DMH 24‐10 B‐SS/T/SS‐X‐E1AA 96686502 2,286
PP EPDM PTFE tube 6/9 DMH 37‐10 B‐PP/E/T‐X‐E144 95701187 1,880
PVC Viton Glass tube 6/12 DMH 37‐10 B‐PVC/V/G‐X‐E1B1B1 96639979 1,796
SS PTFE SS 1/4" BSPf DMH 37‐10 B‐SS/T/SS‐X‐E1AA 96723184 2,350
PP EPDM PTFE tube 6/9 DMH 46‐10 B‐PP/E/T‐X‐E144 96293631 1,848
PVC Viton Glass tube 6/12 DMH 46‐10 B‐PVC/V/G‐X‐E1B1B1 96686730 1,764
SS PTFE SS 1/4" BSPf DMH 46‐10 B‐SS/T/SS‐X‐E1AA 96723338 2,319
PP EPDM PTFE Tube 19/27 DMH 67‐10 B‐PP/E/T‐X‐E1B9B9 96723853 2,187
PVC Viton Glass Tube 13/20 DMH 67‐10 B‐PVC/V/G‐X‐E1B2B2 96686861 2,130
SS PTFE SS 3/4" BSPf DMH 67‐10 B‐SS/T/SS‐X‐E1A1A1 96703518 3,061
PP EPDM PTFE Tube 19/27 DMH 100‐10 B‐PP/E/T‐X‐E1B9B9 96293635 2,209
PVC Viton Glass Tube 13/20 DMH 100‐10 B‐PVC/V/G‐X‐E1B2B2 96723492 2,152
SS PTFE SS 3/4" BSPf DMH 100‐10 B‐SS/T/SS‐X‐E1A1A1 96686766 3,083
PVC Viton Glass Tube 13/20 DMH 102‐10 B‐PVC/V/G‐X‐E1B2B2E0 96724047 5,293
SS PTFE SS 3/4" BSPf DMH 102‐10 B‐SS/T/SS‐X‐E1A1A1E0 96686932 6,290
PP EPDM PTFE Tube 19/27 DMH 143‐10 B‐PP/E/T‐X‐E1B9B9 96293637 5,187
PVC Viton Glass Tube 13/20 DMH 143‐10 B‐PVC/V/G‐X‐E1B2B2 96686958 5,130
SS PTFE SS 3/4" BSPf DMH 143‐10 B‐SS/T/SS‐X‐E1A1A1 96724146 6,127
PVC Viton Glass Tube 13/20 DMH 194‐10 B‐PVC/V/G‐X‐E1B2B2E0 96687101 5,908
SS PTFE SS 3/4" BSPf DMH 194‐10 B‐SS/T/SS‐X‐E1A1A1 96687105 7,659
PP EPDM PTFE Tube 19/27 DMH 213‐10 B‐PP/E/T‐X‐E1B9B9 96293639 5,123
PVC Viton Glass Tube 13/20 DMH 213‐10 B‐PVC/V/G‐X‐E1B2B2 96687022 5,066
SS PTFE SS 3/4" BSPf DMH 213‐10 B‐SS/T/SS‐X‐E1A1A1 96687054 6,063
PP EPDM PTFE 25mm weld DMH 291‐10 B‐PP/E/T‐X‐E1B4B4 96626490 5,379
PVC Viton Glass Tube 13/20 DMH 291‐10 B‐PVC/V/G‐X‐E1B2B2 96693506 5,085
PP EPDM PTFE Tube 19/27 DMH 332‐10 B‐PP/E/T‐X‐E1B9B9 96293643 5,505
PVC Viton Glass Tube 13/20 DMH 332‐10 B‐PVC/V/G‐X‐E1B2B2 96687150 5,448
SS PTFE SS 3/4" BSPf DMH 332‐10 B‐SS/T/SS‐X‐E1A1A1 96687155 7,113
5 29
Accuracy
Dosing flow adjustment
(options on request)
Suction height
Materials
Motor options
(on request)
Head and valve options
(on request)
Stroke sensor (on request)
Servomotor (on request)
Price
Max.
flow
[l/h]
Stroke
speed
[n/min]
Materials
ConnectionsType
designation
Product
number
46 120
54
112
102 54
143 75
92
96
291
144
332
194
213
153
13 63
37 96
24
100
67
120
Maximum pressure 10 bars 37
Dosing
headGaskets Valve balls
PVC Viton Glass 40mm flange DMH 440‐10 B‐PVC/V/G‐X‐E1B8B8E0 96687362 8,091
SS PTFE SS 40mm flange DMH 440‐10 B‐SS/T/SS‐X‐E1C1C1E0 96652052 10,192
PP EPDM Glass DMH 575‐10 B‐PP/E/G‐X‐E1B5B5E0 96617642 8,200
PVC Viton Glass 40mm flange DMH 575‐10 B‐PVC/V/G‐X‐E1B8B8E0 96687402 7,979
SS PTFE SS 40mm flange DMH 575‐10 B‐SS/T/SS‐X‐E1C1C1E0 96687425 10,079
PP EPDM Glass DMH 770‐10 B‐PP/E/G‐X‐E1B5B5 96293647 7,800
PVC Viton Glass 40mm flange DMH 770‐10 B‐PVC/V/G‐X‐E1B8B8E0 96687461 8,011
SS Viton SS 40mm flange DMH 770‐10 B‐SS/V/SS‐X‐E1C1C1E0 96647626 9,958
PP EPDM Glass DMH 880‐10 B‐PP/E/G‐X‐E1B5B5 96636496 7,793
PVC Viton Glass 40mm flange DMH 880‐10 B‐PVC/V/G‐X‐E1B8B8 95732687 7,584
SS PTFE SS 40mm flange DMH 880‐10 B‐SS/T/SS‐X‐E1C1C1 96687519 9,672
PP EPDM Glass DMH 1150‐10 B‐PP/E/G‐X‐E1B5B5 96619853 7,805
PVC Viton Glass 40mm flange DMH 1150‐10 B‐PVC/V/G‐X‐E1B8B8 95734638 7,597
SS Viton SS 40mm flange DMH 1150‐10 B‐SS/V/SS‐X‐E1C1C1 96293650 9,531
Maximum pressure 16 and 25 bar options for DMH 251, DMH280 50‐200 bar
Details and prices on request
1461150
98
112
575
770
880
56
Product
numberPrice
Type
designationConnections
Materials
440
73
Max.
flow
[l/h]
Stroke
speed
[n/min]
Hoses 38
3 91835676 10
10 91836504 14
50 91835680 56
3 96701733 10
10 96702133 14
50 96727418 56
3 95730337 29
10 95730338 92
50 95730339 462
3 95730888 10
10 96727393 19
50 95730889 95
3 96727409 10
10 96727412 20
50 96727415 100
3 95730334 10
10 95730335 20
50 95730336 100
3 95730340 54
10 95730341 176
50 95730342 880
1.5 96699786 10
3 96693751 11
5 91835683 19
10 96653571 37
15 96693067 62
25 91835685 98
50 91835686 191
100 91835686 191
3 96727395 10
10 96705657 22
50 96727398 103
3 96727434 10
10 95730890 22
50 95724702 108
3 95730343 81
10 95730344 264
50 95730345 1,320
10 96727420 61
50 96692592 293
1.5 96727427 23
3 96727426 35
5 96699991 53
10 96696200 99
15 96727429 151
25 96634866 248
50 96695788 468
5 96535070 40
10 96441201 83
5 96535077 61
10 96535079 122
23
13
9/12
PVC6/12
PVC
9PE
13ETFE
0.5PVC
13/20
25/34
32/41
10
PVC 10
PVC
reinforced9
13
19/27
Price
PE 12
PVC 0.5
PE
PVC
ETFE
20
4/6
Hoses are available in various materials, sizes and lengths. *Viscosity similar to water
MaterialMax. pressure at 20 degs. C
[bar]Length [m]
Product
numberInternal/outside tube diameters [mm]
ETFE
13
6/9
5/8
0.5
20
PE
Foot valves 39Foot valves include:‐‐ weight‐ strainer (mesh size approx. 0.8 mm)‐ non return valve‐ hose connection set: 4/6 mm, 6/9 mm, 6/12 mm and 9/12 mm‐ pipe connection set: threaded Rp 1.4", female (stainless steel)Foot valves exclude:‐ Hose or pipe! Order additionally without level indication:
FKM, EPDM Ceramic 98070951 34
PTFE Ceramic 98070952 46
60 FKM, EPDM Ceramic 98070953 54
PTFE Ceramic 98070954 66
SS PTFE SS 98070963 145
As above, additionally with low‐level and empty‐tank indication also with:‐‐ reed switch unit with two floaters‐ 5 metres of cable with PE jacket‐ M 12 plug to connect DDA, DDC, DDE and DDI dosing pump‐ PE cap, 58 mm dia, for assembly in Grundfos cylindrical tanks, or for use with tank adaptors
Electrical data of the level indication:‐‐ max. voltage 48 V, max. current 0.5A, max. load 10 VA with level indication:
FKM, EPDM Ceramic 98070966 100
PTFE Ceramic 98070967 112
60 FKM, EPDM Ceramic 98070968 143
PTFE Ceramic 98070969 155
SS PTFE SS
Rigid suction lances‐ hose connection set: 4/6 mm, 6/9 mm, 6/12 mm, 9/12 mm
Suction lances include: ‐ adjustable tank connection with holes for e.g. relief line‐ strainer (mesh size approx. 0.8 mm) Also order connecting hose between suction lance and pump‐ non return valve without level indication:
FKM, EPDM Ceramic 98070978 83PTFE Ceramic 98070979 95
FKM, EPDM Ceramic 98070980 207PTFE Ceramic 98070981 218
FKM, EPDM Ceramic 98070990 83PTFE Ceramic 98070991 95
FKM, EPDM Ceramic 98070992 207PTFE Ceramic 98070993 218
FKM, EPDM Ceramic 98071002 83PTFE Ceramic 98071003 95
FKM, EPDM Ceramic 98071004 207PTFE Ceramic 98071005 218
FKM, EPDM Ceramic 98071014 83PTFE Ceramic 98071015 95
FKM, EPDM Ceramic 98071016 207PTFE Ceramic 98071017 218
FKM, EPDM Ceramic 98071026 83PTFE Ceramic 98071027 95
FKM, EPDM Ceramic 98071028 222PTFE Ceramic 98071029 234
FKM, EPDM Ceramic 98071038 83PTFE Ceramic 98071039 95
FKM, EPDM Ceramic 98071040 222PTFE Ceramic 98071041 234
FKM, EPDM Ceramic 98071050 83PTFE Ceramic 98071051 95
FKM, EPDM Ceramic 98071052 237PTFE Ceramic 98071053 249
FKM, EPDM Ceramic 98071062 83PTFE Ceramic 98071063 95
FKM, EPDM Ceramic 98071064 237PTFE Ceramic 98071065 249
100 l & 200
l
500 l &
1000 l
60 l
PE
PVDF
60
300 l
1200
suitable for IBC
690
PE
1100
PE
PVDF
570
PE
PVDF
500
PE
PVDF
40 l
PE
PVDF
820
PE
PVDF
980
PVDF
PVDF
400
PE
Pricedepth* [mm]
Material of
valve gasketBall
Grundfos
tank
PVDF
Price
PE
PVDF
The switch mode of the low level and empty tank indication is factory set
Max. flow [l/h] Housing
Product
number
Suction lances are made from rigid pipe
Max. immersionHousingMax. flow [l/h]
PE
Material of
valve gasketBall
Product
numberPrice
Foot valves are installed at the lower end of the suction hose. They are
Max. flow [l/h] HousingMaterial of
valve gasketBall
Product
number
Rigid suction lances 40As above, additionally including low level and empty tank indication also with:‐‐ reed switch unit with 2 floaters Also order connecting hose between suction lance and pump‐ 5 metres of cable with PE jacket Electrical data of the level indication:‐‐ M12 plug to connection DDA, DDC, DDE or DDI dosing pump ‐ max. voltage 48 V
‐ max. current 0.5 A‐ max. load: 10 VA
with level indication:
FKM, EPDM Ceramic 98071074 137PTFE Ceramic 98071075 149
FKM, EPDM Ceramic 98071076 273PTFE Ceramic 98071077 284
FKM, EPDM Ceramic 98071086 137PTFE Ceramic 98071087 149
FKM, EPDM Ceramic 98071088 273PTFE Ceramic 98071089 284
FKM, EPDM Ceramic 98071098 137PTFE Ceramic 98071099 149
FKM, EPDM Ceramic 98071100 273PTFE Ceramic 98071101 284
FKM, EPDM Ceramic 98071110 137PTFE Ceramic 98071111 149
FKM, EPDM Ceramic 98071112 273PTFE Ceramic 98071113 284
FKM, EPDM Ceramic 98071122 137PTFE Ceramic 98071123 149
FKM, EPDM Ceramic 98071124 288PTFE Ceramic 98071125 300
FKM, EPDM Ceramic 98071134 137PTFE Ceramic 98071135 149
FKM, EPDM Ceramic 98071136 288PTFE Ceramic 98071137 300
FKM, EPDM Ceramic 98071146 137PTFE Ceramic 98071147 149
FKM, EPDM Ceramic 98071148 303PTFE Ceramic 98071149 315
FKM, EPDM Ceramic 98071158 137PTFE Ceramic 98071159 149
FKM, EPDM Ceramic 98071160 303PTFE Ceramic 98071161 315
See tank adaptors on next page for installing in any chemical containers. Immersion lengths are adjustable when used with the adaptor!
500 l &
1000 l
Grundfos
tank
40 l
60 l
100 l & 200
l
300 l
Max. flow [l/h]
820
PE
PVDF
980
PE
1100
PE
PVDF
1200
suitable for IBC
PE
PVDF
Material of
valve gasketBall
Product
numberPrice
depth* [mm]
400
PE
500
PVDF
570
PE
PVDF
The switch mode of the low level and empty tank indication is
Max. immersionHousing
PVDF
PE
PVDF
PVDF
factory set to N/O. The switch mode can be set to N/C by turning the turning the floaters upside down.
690
PE
60
Level control units 41
Description98306210 10698375695 103
Adaptors for any chemical containers or tanks
98071170 12
98156690 39
98071171 24
PE, orange 98071172 24
Jerri cans with small opening (approx. 36 dia) PE, green 98071173 24
Jerri cans with medium sized opening (approx. 45 dia) PE, yellow 98071174 15
Jerri cans with large opening (approx. 57 dia) PE, brown 98071175 24
98071176 24
98071177 33
Two variants are available:‐emission protection kit with snifting valve: no gas can escape from the container, but air can be drawn in.‐ emission protection kit for use with filter: gas can escape from the container and air can be drawn in. The kit can be connected to a filter by means of a 4/6 mm hose.They include:‐ gasket for the tank adaptor‐ snifting valve or hose nipple 4/6 mm (hose is not included)‐ gasket for the cable outlet
Emission protection kit with snifting valve Can be retrofitted 98071178 97
Emission protection kit for use with a filter Can be retrofitted 98071179 67
M 12 plug‐to‐flat plug adaptor 96635010 65
PE, blue
drums with S 56 x 4 coarse thread (TriSure®)
US container with bung hole of 63 mm (ASTM International)
Price
M 12 plug‐to‐flat plug adaptor
Description
Product
numberPrice
The adaptor allows to connect suction lances or foot valves with level indication to pumps with a level input designed for flat plugs
(e.g. DMX and DMH with AR control unit).
Product
numberPrice
counter nut for tanks without threaded opening e.g. 100‐litre square tank or
1000 litre cylindrical tankPVC, grey
containers with 2" NPT threaded opening PVC, grey
PE, white
Tank adaptors for fitting suction lances and foot valves
(with level indication)
IBC with opening of 150 mm dia, S 160 x 7 PE, black
Product
number
These adaptors allow the installation of standard suction lances
(G 2 thread) and foot valves with level indication (PE cap) on
different types of containers and tanks
Adaptor type for container type
drums with S 70 x 6 coarse thread (MAUSER 2")
Emission protection kits
Variant
Remark
Level control units are suitable for dosing pumps with input for
level control. The switch mode of the reed switch unit is factory
set to N/O. The switch mode can be set to N/C by turning the
floater(s).
Level control unit for agitator protection up to 60 l/hr. Clip to suction lance. Material PEFlexible control unit with 2 float switches, 5 m cable, and weight, 60 l/hr max.
Product
numberPrice
Gas emitted by liquid in a container can cause bad odour and corrosion. Emission protection kits help avoid such problems. Suction
Injection units 42
FKM Ceramic 95730904 42
EPDM Ceramic 95730908 42
FKM Ceramic 95730912 37
EPDM Ceramic 95730916 37
PTFE Ceramic 95730920 64
FKM Ceramic 95730924 64
EPDM Ceramic 95730928 64
PTFE Ceramic 95730932 90
St.steel PTFE St stl 95730936 223
FKM Ceramic 95730940 68
EPDM Ceramic 95730944 68
PTFE Ceramic 95730948 95
Injection units for larger pumps
Housing Gasket Ball
Threaded connection 3/4" BSP mPP EPDM Ceramic injection valve DN10,19/27+25/34 PP/E/C 96527119 201
PP Viton Ceramic injection valve DN10,19/27+25/34 PP/V/C 96527120 201
PVDF Viton Ceramic injection valve DN10,19/27+25/34 PV/V/C 96527121 232
3/4" f 100 SS Viton SS injection valve RP3/4" SS/V/SS 96534457 410
Threaded connection 3/4" NPT mPP EPDM Ceramic injection valve NPT 3/4" PP/E/C 96566142 201
PP Viton Ceramic injection valve NPT 3/4" PP/V/C 96566143 201
PV Viton Ceramic injection valve NPT 3/4" PV/V/C 96566144 276
3/4" NPT 100 SS Viton SS injection valve NPT 3/4" SS/V/SS 96537923 410
Threaded connection 1" BSP m PP Viton Glass IV 0300‐10 PP/V/G 4B4‐30/60.00 96688312 149
PP EPDM PTFE IV 0300‐10 PP/E/T 4B4‐30/60.00 96688317 155
19/27 mm 10 PP Viton Glass IV 0300‐10 PP/V/G 4B9‐30/60.00 96688316 151
PVC PTFE Ceramic IV 0300‐10 PVC/T/C 4B2‐30/60.00 95703433 239
PVC Viton Glass IV 0300‐10 PVC/V/G 4B2‐30/60.00 96688308 105
PVC Viton Glass IV 0300‐10 PVC/V/G 4B2‐30/200,00 96688310 119
PVC EPDM PTFE IV 0300‐10 PVC/E/T 4B2‐30/60.00 96688311 103
PVC EPDM SS IV 0300‐10 PVC/E/SS 4B9‐30/60.00 95702658 108
PVC Viton Glass IV 0300‐10 PVC/V/G 4B9‐30/60.00 96688309 111
PVC Viton Glass IV 0300‐10 PVC/V/G 4B9‐30/200.00 96688315 126
25 mm 10 PVDF PTFE PTFE IV 0300‐10 PV/T/T 4B4‐30/60.00 96688314 374
3/4" f 100 SS Viton SS IV 0300‐100 SS/V/SS 4A1‐30/120.00 95703117 518
Threaded connection 1" NPT m3/4" NPTm SS Viton SS IV 0300‐100 SS/V/SS 4A3‐31/120.00 96727298 533
PVC Viton Glass IV 0300‐10 PVC/V/G 4A7‐31/120.00 96727299 224
PVC EPDM PTFE IV 0300‐10 PVC/E/T 4A7‐31/120.00 96727300 222
PV PTFE PTFE IV 0300‐10 PV/T/T 4A7‐31/120.00 96727301 599
Threaded connection 1" BSP m 1 1/4" f PP EPDM Glass Kit, injec.valve DN20, RP 1 1/4" PP/E/G 96527122 371
1 1/4" f PP Viton Glass Kit, injec.valve DN20, RP 1 1/4" PP/V/G 96527123 378
1 1/4" f PVDF Viton Glass Kit, injec.valve DN20, RP 1 1/4" PV/V/G 96527124 689
Threaded connection 1" NPT m1 1/4" NPT PP EPDM Glass Kit, injection valve NPT 1 1/4" PP/E/G 96566148 371
1 1/4" NPT PP Viton Glass Kit, injection valve NPT 1 1/4" PP/V/G 96566149 378
1 1/4" NPT PVDF Viton Glass Kit, injection valve NPT 1 1/4" PV/V/G 96566152 689
1 1/4" NPT SS Viton SS Kit, injection valve RP1 1/4" SS/V/SS 96534459 901
1 1/4" NPT SS Viton SS Kit, injection valve NPT 1 1/4" SS/V/SS 96537971 901
Threaded connection 2"1500 2" f 10 PVC Viton Glass IV 0406‐10 PVC/V/GX‐40/200.00 96688318 453
1150
400
19/27 +
25/34 mm
3.4" NPT
20/25 mm
pipe10
13/20 mm
hose
20/25 mm
pipe
Price
Product
numberPriceBall
PP
PVC
Material
10
Type description
100
16
19/27 mm
hose
3/4" NPT
Product
number
Max.
flow rate
[l/h]
Conn.
100
10
10
Max
pressure
[bar]
PVC
10
100
10
10
Injection units connect the dosing line with the process line. They ensure a minimum backpressure of 0.7 bar, and
avoid backflow of the dosing liquid. In general they include: injection pipe (PP, PVC and PVDF versions can be
shortened), spring loaded non‐return valve with spring, hose connection set: 4/6 mm, 6/9 mm, 6/12 mm and 9/12
mm and for stainless steel Rp 1/4" female threaded connection. See next page for sodium hypochlorite injectors
Max.
flow rate
[l/h]
16
60PVDF
HousingMaterial
gasket
Max.
pressure
[bar]
Injection units for sodium hypochlorite 43
PVC FKM Ceramic 95730964 68
Injection units with ball valve
FKM Ceramic 95738319 212
EPDM Ceramic 95730956 162
St.steel PTFE Stainless steel 95730960 308
Withdrawable injection units
FKM Ceramic 95730968 327
EPDM Ceramic 95730972 327
Hot‐injection units with ball valve
10 PVDF PTFE Ceramic 95730976 245
16 St.steel PTFE Stainless steel 95730980 399
24
6016
Max.
pressure
[bar]
60
Product
number
Price
PriceProduct
number
Price
Price
Hot injection units with ball valve can be used for direct injection of dosing liquid into processes with a temperature
of up to 120 degs C. In addition, they also include: injection pipe in stainless steel, ball valve installed between the
injection pipe and the cooling pipe in stainless steel, bendable cooling pipe, st. steel, length 1 m
Max.
flow rate
[l/h]
Material
gasket
Max.
flow rate
[l/h]
Product
number
Max.
pressure
[bar]
Injection units with lip valve are typically used to add sodium hypochlorite solution to water with a high carbonate
content. The FKM lip prevents crystallisation and blocking caused by alkali carbonate reactions at the point of
injection.
Injection units with ball valve are used for applications where the injection point has to be closable. The ball valve is
placed between the injection pipe and the spring loaded non return valve. Thus, the dosing line can be completely
disconnected from the process. The non return valve can be disassembled and cleaned without stopping the process
and emptying the process line.
These injection units are used when regular cleaning of the injection pipe is required. Their construction allows to
withdraw the injection unit from the process line and to clean it, without stopping the water flow. The injection point
can be closed with the integrated ball valve. The immersion depth of the injection pipe can be adjusted.
BallProduct
numberHousing
60 16
Housing Ball
PVC
PVC
Housing
Ball
Max.
pressure
[bar]
60 10
Max.
pressure
[bar]
Material
gasketBall
Max.
flow rate
[l/h]
Max.
flow rate
[l/h]
Material
gasket
Material
gasketHousing
Multi‐function valves, pressure relief valves, 44and pressure loading valves
Multi‐function valves (5/8" only)
FKM PTFE 95704585 158
EPDM PTFE 95704591 158
FKM PTFE 95730807 158
EPDM PTFE 95730808 158
PTFE PTFE 95730809 200
FKM PTFE 95730810 164
EPDM PTFE 95730811 163
PTFE PTFE 95730812 206
FKM PTFE 95730821 157
EPDM PTFE 95730822 156
FKM PTFE 95730823 157
EPDM PTFE 95730824 156
PTFE PTFE 95730825 198
FKM PTFE 95730826 163
EPDM PTFE 95730827 162
PTFE PTFE 95730828 204
Pressure relief valves
FKM/EPDM PTFE 95730757 103
FKM/EPDM PTFE 95730758 102
PTFE PTFE 95730759 142
FKM/EPDM PTFE 95730760 148
PTFE PTFE 95730761 188
No gaskets PTFE 95730771 244
FKM/EPDM PTFE 95730773 103
FKM/EPDM PTFE 95730774 103
PTFE PTFE 95730775 142
FKM/EPDM PTFE 95730776 148
PTFE PTFE 95730777 188
No gaskets PTFE 95730783 244
PriceRelief pressure
[bar]
PP
relief pressure
10 bar
Stainless steel
PriceDiaphragm
PVDF
relief pressure
16 bar
PP
Max.
flow rate
[l/h]
10 bar
16 bar
Stainless steel
Relief pressure
[bar]
Housing and connection
material
60
PVC
PVDF
Product
number
Pressure relief valves, or safety valves, protect the pump and the discharge installations against excessive pressures.
All pressurised dosing installations should include a pressure relief valve.
Multi‐function valves combine the functions of pressure relief valves and pressure loading valves. In addition, they
allow deaeration of the pump and emptying of the discharge line for maintenance.
Max.
flow rate
[l/h]
Housing
Product
number
60
Connection
material
Material
gasketDiaphragm
Pressure loading valves maintain a certain back pressure for the pump. They are used in applications with too low
back pressure or no back pressure at all. Pressure loading valves are also used to prevent syphoning, when the
admission pressure is higher that the back pressure. They provide a constant back pressure for the dosing pump
when the system pressure is fluctuating.
A multi‐function valve is mounted directly on the pump discharge side (5/8" fitting only). The top connection is for the
discharge line, the side connection leads the relief liquid back into the tank. Loading pressure adjustable from 1 to 4
bar, factory set to 3 bar. Relief pressure adjustable from 7 to 16 bar, factory set at 10 bar or 16 bar. Maximum system
pressure 16 bar. Hose connection set: 4/6 mm, 6/9 mm, 6/12 mm and 9/12 mm
Pressure relief valves are installed in the discharge line near the pump, using the 2 in‐line connections. The side
connection leads the relief liquid back into the tank. Relief pressure adjustable from 5 to 10 bar, factory set at 10 bar
or relief pressure adjustable from 7 to 16 bar, factory set at 16 bar. Maximum system pressure 16 bar. Hose
connections: 4/6 mm, 6/9 mm, 6/12 mm and 9/12 mm. Stainless steel: threaded Rp 1/4", female
PP
PVC
PVDF
PVDF
PP
PVC
Material
gasket
PVC
PVDF
Pressure relief valves for larger pumps 45
PP EPDM PTFE 96295888 419
PP FKM PTFE 96295889 423
PVC EPDM PTFE 96295890 335
PVC FKM PTFE 96295891 338
PVDF PTFEPTFE
25 mm fusion96699704
769
SS No gaskets PTFE 3/4" BSP f 96295892 1,056
PP EPDM PTFE 96295893 709
PP FKM PTFE 96295894 700
PVC EPDM PTFE 96295895 602
PVC FKM PTFE 96295896 594
PVDF PTFE PTFE32 mm
flange/40 mm96692233 1,598
st.stl. ‐ PTFE 1 1/4" BSP f 96295897 1,981
Pressure loading valves
FKM/EPDM PTFE 95730741 89
FKM/EPDM PTFE 95730742 89
PTFE PTFE 95730743 116
FKM/EPDM PTFE 95730744 127
PTFE PTFE 95730745 168
No gaskets PTFE 95730751 231
Pressure loading valves for larger pumps
PP EPDM PTFE 96295903 387
PP FKM PTFE 96295904 388
PVC EPDM PTFE 96295905 314
PVC FKM PTFE 96295906 316
PVDF PTFE PTFE 25 mm fusion96618727
687
st.stl. ‐ PTFE 3/4" BSPf 96295907 631
PP EPDM PTFE 96295908 634
PP FKM PTFE 96295909 629
PVC EPDM PTFE 96295910 645
PVC FKM PTFE 96295911 647
PVDF PTFE PTFE32 mm
flange/40 mm96692234 1,299
st.stl. ‐ PTFE 1 1/4" BSP 96295912 1,777
PriceDiaphragmProduct
number
1‐5 adjustable
Diaphragm ConnectionProduct
numberPrice
1150
400
Material
gasket
13/20 mm
hose, 25 mm
Max.
flow rate
[l/h]
Relief pressure
[bar]Material
PVC
1‐4 adjustable
1‐4 adjustable
Gasket
19/27 mm
hose
PVDF
Connection
PP
Hose 19/27
mm + 25/34
Pressure loading valves are installed in the discharge line after the pressure relief valve, and after the pulsation
damper, if fitted. Loading pressure: factory set at 3 bar, adjustable from 1 to 5 bar. Maximum system pressure 16 bar.
Hose connection set: 4/6 mm, 6/9 mm, 6/12 mm and 9/12 mm. Stainless steel threaded, Rp 1/4", female
60
32/40 mm
pipe
4‐11 adjustable
4‐11 adjustable
DiaphragmMaterial Gasket
Max.
flow rate
[l/h]
Housing and connection
material
Maximum load
pressure [bar]
400
1150
Relief pressure
[bar]
Product
numberPrice
Hose 13/20
mm + 25 mm
32/40 mm pipe
Max.
flow rate
[l/h]
Stainless steel
Pump connection kits 46
PP 97691902 11
PVC 97691903 11
PVDF 97691904 18
PP 97691905 11
PVC 97691906 11
PVDF 97691907 18
PP 97702474 10
PVC 97702485 10
PVDF 97702495 14
PP 97702475 10
PVC 97702486 10
PVDF 97702496 14
PP 97702476 10
PVC 97702487 10
PVDF 97702497 15
PP 97702477 10
PVC 97702488 10
PVDF 97702498 14
PP 97702478 10
PVC 97702489 10
PVDF 97702499 14
PP 97702479 10
PVC 97702490 10
PVDF 97702500 14
PP 97702482 10
PVC 97702492 10
PVDF 97702503 14
PP 97702483 10
PVC 97702493 10
PVDF 97702504 14
PP 97702481 21
PVDF 97702502 22
PP 97702480 10
PVDF 97702501 16
Internal diameter 12 mm PVC 97702491 10
PP 97702484 18
PVC 97702494 18
PVDF 97702505 43
SS 97702508 33
Rp 1/4" SS 97702472 31
1/4" NPT SS 97702473 31
4/6 mm SS 97702506 65
8/10 mm SS 97702507 68
PP 96535096 28
PVDF 96535102 45
PP 96535103 64
PVDF 96535104 130
PP 91835696 21PVC 96704663 21
19/27 mm PVC 96679391 48
PP 96727574 42
PVC 96699969 29
PVDF 96727612 91
12/16 mm PTFE hose PVDF 96727620 179
PP 91835697 40
PVDF 91835698 98
PVC 96688366 10
PVC 91835723 21
PVDF 91835726 103
19/22 mm SS 96727555 271
3/4" SS 96700184 81
3/4" NPT SS 91835724 89
DME 375
DME 940
1 1/4" threaded,
male
Hose connection
Pipe, threaded, male
2" threaded,
male
20/25 mm
Price
Hose connection
Connection type MaterialProduct
number
4/6 mm, 6/9 mm, 6/12 mm,
9/12 mm
0.17" x 1/4", 1/4" x 3/8",
3/8" x 1/2"
SMART
DDI60
DMX 4‐50
DMH 5‐46
5/8"
threaded,
male
19‐27 mm and
25/34 mm
Pipe (solvent cement)
Pipe, threaded, female
Pipe (cutting ring type)
Pipe (solvent cement)
1/2" NPT
19‐27 mm and
25/34 mm
Pipe, threaded, female
Hose clamp32/41 mm and
38/48 mm
Pipe (fusion weld)
DDI 150
DMX 67‐321
DMH 100‐332
Hose connection
6/8 mm
SMART
DDI60
DMX 4‐50
DMH 5‐46
5/8"
threaded,
male
6/12 mm
3/4" NPT
13/20 mm
Hose (cutting ring type)
Retrofit pump connection kits and inlay kits for the integration of standard Grundfos dosing pumps into installations
with various sizes of hoses or pipes. A pump connection kit includes: 1 set of inlays, 1 union nut.
DME 60
DME 150
SMART
DDI60
DMX 4‐50
DMH 5‐46
5/8"
threaded,
male
4/6 mm, or
0.17" x 1/4"
5/8 mm
9/12 mm
1/4" x 3/8"
1 1/4" threaded,
male
6/9 mm
Pipe, threaded, male
Pipe (fusion weld) External diameter 16 mm
Pump
Type
Pump
connection
size
One union nut and
insert(s) for hose/pipe
sizes:
3/8" x 1/2"
1/8" x 1/4"
Pump connection kits continued 47
PVC 96727598 53
PP 96727596 45
PVDF 96727597 190
PVC 96700091 24
PP/PVC 96727610 67
PVDF 96727541 586
PVC 91835730 64
PP/PVC 96727586 103
PP 96727589 76
PVC 91835728 73
PVDF 96727588 111
SS 91835727 141
1 1/4" SS 96727595 140
1 1/4" NPT SS 91835729 158
Stainless steel grade 1.4401. Fit stainless steel fittings only to stainless steel pumps!
Inlay kitAn inlay kit includes: 2 sets of inlays (inlay = internals)
PP 95730984 10
PVC 95730720 10
PVDF 95730729 16
PP 95730711 10
PVC 95730721 10
PVDF 95730730 19
PP 95730712 10
PVC 95730722 10
PVDF 95730731 16
PP 95730713 10
PVC 95730723 10
PVDF 95730732 16
PP 95730714 10
PVC 95730724 10
PVDF 95730733 16
PP 95730715 10
PVC 95730725 10
PVDF 95730734 16
PP 95730718 10
PVC 95730727 10
PVDF 95730737 16
PP 95730719 10
PVC 95730728 10
PVDF 95730738 16
PP 95730717 34
PVDF 95730736 33
PP 95730716 12
PVDF 95730735 23
PVC 95730726 10
SS 95730739 37
SS 95730740 371/4" NPT
Price
Hose (cone and ring)
4/6 mm, or 0.17" x 1/4"
5/8 mm
6/8 mm
Pipe cementing Internal diameter 12 mm
Pipe, threaded, female
Hose (cutting ring type)
Pipe welding External diameter 16 mm
Pipe, threaded female
Rp 1/4"
1/8" x 1/4"
6/9 mm
6/12 mm
9/12 mm
Hose clamp
Connection typePump
Type
Pump
connection
size
One union nut and
insert(s) for hose/pipe
sizes:
MaterialProduct
numberConnection type Size
PriceProduct
number
1 1/4" NPT
Material
Pipe (solvent cement)
32/42 mm
DMX 440‐765
DMH 440‐
1500
Flange (ex counter flange) 40 mm 1 1/4"
2" threaded,
male
1/4" x 3/8"
3/8" x 1/2"
Pipe (fusion weld)
Pipe, threaded, female
Adaptors 48Threaded adaptors
Female Male
PP FKM/EPDM 95730407 23
FKM/EPDM 95730408 23
PTFE 95730409 36
FKM/EPDM 95730410 43
PTFE 95730411 56
PP FKM/EPDM 95730412 23
FKM/EPDM 95730413 23
PTFE 95730414 36
FKM/EPDM 95730415 43
PTFE 95730416 56
PP FKM/EPDM 95730417 23
FKM/EPDM 95730418 23
PTFE 95730419 36
FKM/EPDM 95730420 43
PTFE 95730421 56
PP FKM/EPDM 95730422 43
FKM/EPDM 95730423 43
PTFE 95730424 60
FKM/EPDM 95730425 64
PTFE 95730426 81
PP FKM/EPDM 95730427 23
FKM/EPDM 95730428 23
PTFE 95730429 36
FKM/EPDM 95730430 43
PTFE 95730431 56
PP FKM/EPDM 95730432 43
FKM/EPDM 95730433 43
PTFE 95730434 56
FKM/EPDM 95730435 64
PTFE 95730436 56
Union nut kits
96633937 10
96633938 24
96731917 66
96731916 34
96731915 84
96731914 138
1 1/4" 5/8"
PVDF
2"
Threaded connection size
SS
Pump Type
PP
PVDFDME 375 and 940
1 1/4"
Material
PP
Product
number
5/8" M20 x 1.5
PVDF
PVC
PVDF
PVC
PVDF
PVDF
5/8" 3/4"PVC
PVDF
5/8" 1 1/4"PVC
Price
DME 60 to 150
Threaded adaptors are used to convert between different threaded connection sizes. A threaded adaptor kit includes:
1 adaptor and 1 O‐ring
5/8" 3/8"
Price
3/8" 5/8"PVC
PVDF
Type
Threaded connection sizeMaterial
gaskets
Product
number
PVC
SS
Two union nuts in each kit
Housing material
Union nut adaptors 49
Housing material
Female Male
PVC 9573043820
PP 9573043720
PVDF 9573043932
Hose‐to‐hose and hose‐to‐pipe adaptors
Side 1 Side 2
PP FKM/EPDM 95730367 32
FKM/EPDM 95730368 29
PTFE 95730369 53
FKM/EPDM 95730370 64
PTFE 95730371 89
PP FKM/EPDM 95730356 22
FKM/EPDM 95730357 18
PTFE 95730358 43
FKM/EPDM 95730359 47
PTFE 95730360 73
Without Thrd Rp 1/4" Stainless steel PTFE 95730361 146
FKM/EPDM 9573037818
PTFE 9573037926
FKM/EPDM 9573036512
PTFE 9573036620
PP FKM/EPDM 95730377 31
FKM/EPDM 95730380 47
PTFE 95730381 60
PP FKM/EPDM 95730362 24
FKM/EPDM 95730363 37
PTFE 95730364 49
T‐pieces
PP FKM/EPDM 95730387 92
FKM/EPDM 95730388 47
PTFE 95730389 85
FKM/EPDM 95730390 179
PTFE 95730391 217
PP FKM/EPDM 95730346 77
FKM/EPDM 95730347 32
PTFE 95730348 70
FKM/EPDM 95730349 156
PTFE 95730350 194
For hoses
4/6, 6/9,
6/12, 9/12
mm
WithoutExternal 16 mm
dia. PVDF
PVC
Without
PVDF
Pipe welding
end on one
side, male
thread G
5/8" on the
other side
Product
number
PVDF
External 16 mm
dia.
5/8" 5/8"
TypeThreaded connection size
Union nut adaptors consist of a rigid pipe with union nuts on both ends. They have neither gaskets nor glued or
welded connections
PriceBottom Top Side
Housing &
connections materials
Material
gaskets
PVC
Connections
3 male
threads
G 5/8"
For hoses 4/6, 6/9, 6/12, 9/12
mm
PVDF
Type Description
Internal 12 mm
dia.
Product
number
PVC
PVC
PVDF
Valve
housing with
2 male
threads
G 5/8"
For hoses 4/6 mm, 6/9 mm,
6/12 mm, 9/12 mm
PVC
PVDF
Without
Pipe
cementing
end on one
side, male
thread G
5/8" on the
other side
For hoses
4/6, 6/9,
6/12, 9/12
mm
WithoutInternal 12 mm
dia.PVC
Type Description
Connections
Housing &
connections materials
PriceMaterial
gaskets
PriceProduct
number
T‐pieces continued 50PP FKM/EPDM 95730397 83
FKM/EPDM 95730398 39
PTFE 95730399 64
FKM/EPDM 95730400 158
PTFE 95730401 184
PP FKM/EPDM 95730351 77
FKM/EPDM 95730352 32
PTFE 95730353 58
FKM/EPDM 95730354 148
PTFE 95730355 173
Pulsation dampersSuction side pulsation damper
Materials Pressure Connections
Body Seals [bar] [process]
PVC FKM 91835549 579
EPDM 96688101 579
PVDF PTFE 6 3/4" 96690350 1,356
SS ‐ 40 1/4" 96688107 2,266
PVC FKM 96688102 734
EPDM 96654767 734
PVDF PTFE 6 3/4" 96688100 1,363
SS ‐ 40 3/4" 96688108 2,683
5 PVC FKM 96688103 834
EPDM 96653755 834
SS ‐ 40 3/4" 96688109 3,066
Manual vacuum pump as suction aid
suction aid (manual pump with tube and 3‐way ball valve 96653775 708
Aeration and drain valves
96638467 268
96693605 223
96727337 371
96727338 323
96704688 691
Description
ConnectionsBody / Gaskets
PVC
PVDF
PVC
Materials
PVDF
1
2
Description
Union
nut G
5/8"
For hoses
4/6, 6/9,
6/12, 9/12
mm
Without
3
2 male
threads
G 5/8", 1
female conn.
with union
nut
Aeration and drain valves DN10
1 1/2"
PriceVolume
[l]
2 1"
DMX 96, 100, 152, 165, 193, 200, 321,
330, 385, 400, 510, 630, 720
DMH 332, 550
DME 375 and 940
DMH 440, 575, 440, 880, 1150, 1500
PriceProduct
number
Pump type (guide only)
Price
2 2 1/4"
Product
number
PVDF / FKM
Product
number
SMART
DMX 4‐75 versions, DMX 80, 95, 105, 120, 123, 130,
160, 199, 210, 240, 250
DMH up to 276 l/hr
DME and DDI 60 and 150
PVC / FKM
PVC / EPDM
PP / FKM
PVC / EPDM
Without
Discharge side pulsation dampers with separating diaphragm (bladder style) 51
Other options (available on request)Basic type without connections and mounting materialDifferent connections availableDifferent pre‐charge pressures, please advise at time of orderWithout pressure guage (available on request)
Pressure Size
BodyDia. &
seals[bar]
FKM 10 5/8" POA
EPDM 10 5/8" POA
FKM 200 5/8" POA
EPDM 200 5/8" POA
FKM 10 5/8" POA
EPDM 10 5/8" POA
FKM 10 5/8" POA
EPDM 10 5/8" POA
FKM 180 5/8" POA
EPDM 180 5/8" POA
FKM 10 5/8" POA
EPDM 10 5/8" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
FKM 130 1 1/4" POA
EPDM 130 1 1/4" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
FKM 50 1 1/4" POA
EPDM 50 1 1/4" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
FKM 40 1 1/4" POA
EPDM 40 1 1/4" POA
FKM 10 1 1/4" POA
EPDM 10 1 1/4" POA
Cross pieces
POA
POA
POA
POA
POA
POA
POA
POA
POA
PP POA
PVC
SS
PP
0.15
PVC
SS
PP
Volume
[l]
Materials
PVC
SS
PP
Product
numberPricePump type (guide only)
Flange DN 32
DN 10 ‐ 3/4"
DN 20 ‐ 1 1/4"
Flange DN 32 Flange DN 32
DN 8 ‐ 5/8"
DN 20 ‐ 1 1/4"
Process connections
SMART
DMX 4, 7, 8, 9, 14, 16, 18, 27, 35
DMX 12, 26, 50 up to 3 bar
DMH 4.5, 4.9, 5, 11, 13, 17, 21, 24, 24, 37, 45, 46, 54
DDI 60 and 150
DME 60 and 150
DMX 17, 25, 39, 60, 75, 115, 40, 67, 80, 123, 160
DMH 67 and 100
DN 4 ‐ 5/8" DN 4 ‐ 5/8"
0.07
PP
PVDF
PVC
DN 4 ‐ 5/8"
DN 10 ‐ 3/4"
DN 20 ‐ 1 1/4"
DN 20 ‐ 1 1/4"
Flange DN 32
Flange DN 32
DN 20 ‐ 1 1/4"
Flange DN 32
PVC
10
0.35
DME 375
DMX 321, 525, 765
DMH 143, 202, 213, 276
DMH 332 and 550 up to 5 bar
DN 8 ‐ 5/8"
0.65 SS
PP
PVC
Pulsation damper sidePrice
1.4
PVC
DME 940
DMH 332 and 550 above 5 bar
DMH 575, 440, 880, 1150, 1500
SS
PP
Product
numberPump outlet
Connections
Accessories for pulsation dampers 52
POA
POA
POA
POA
POA
POA
Water meterThe in‐line contacting head water meter with potential free pulse signal is suitable for use in flow proportional dosing applications.
Maximum pressure 16 bar.
Size BSPm K‐factor Weight Price
max. nom. min.pulse min. (K=litres per pulse) kg
m3/hr m3/hr l/hr l/hr
DN15 K=1 98681811 211
DN15 K=10 98681812 211
DN20 K=1 98681813 228
DN20 K=10 98681814 228
DN25 K=1 98681815 291
DN25 K=10 98681816 291
DN32 K=1 98681817 313
DN32 K=10 98681818 313
DN40 K=1 98681819 525
DN40 K=10 98681820 525
DN50 K=1 98681821 615
DN50 K=10 98681822 615
Main body of brass construction (cast iron for 2"). WRAS approved.
The chamber is made of self cleaning synthetic resin approved to BS 6920. Can be installed horizontally and vertically.
PriceDescriptionProduct
number
Filling device for stainless steel pulsation dampers, with pressure gauge, up to 160 bar, compressed air filled via a 3/4" connection.
Filling device for stainless steel pulsation dampers, with pressure gauge, up to 60 bar, compressed air filled via 1/4" connection
Adaptor for filling valve (bicycle pump type) for pulsation dampers up to 8 bar, for use in conjunction with compressed air filling device
or pressure gauge.
Compressed air filling device for plastic pulsation dampers, for an existing compressed air plant, control lever, pressure gauge and tube
with filling valve, for use in conjunction with adapter
Filling device for plastic or stainless steel pulsation dampers, with pressure gauge, up to 25 bar, compressed air filled via 1/4"
connection
20 mm
25 mm
30 mm
40 mm
50 mm*
1/2”
3/4”
1”
1.1/4”
1.1/2”
Filling device for stainless steel pulsation dampers, with pressure gauge, up to 250 bar, compressed air filled via a 1/4" connection.
An inferential multi‐jet type water meter for cold water installations with a direct reading register.
Flowrate Product
number
15 mm
2”
3
5
7
12
20
30
1.5
2.5
3.5
6
10
15
1.4
1.7
2.6
3.1
5.2
8.5
120
200
280
400
800
3000
30
50
70
100
200
450
Dosing stations and pump accessories 53Fast and easy to assemble with very few tools
Direct mounting of dosing pump and suction line without needing
to drill holes
Riser support plate for electric mixer
All screws and brackets available to order
Strong, high wall thickness polyethylene
What you will need to build a tankset:Page:
1. Dosing tank, select size and colour see below
2. Set of mounting screws for dosing pump 56
3. Bund (optional) 56
4. Dosing pump SMART dosing pumps
5. Dosing pump input/output cables (if necessary) 19
6. Installation kit or 18
‐ Rigid suction lance 42
‐ Injection fitting 44
‐ Hose 40
7. Multifunction valve (optional) 46
8. Floor mounting brackets (optional) 56
9. Electrix mixer (optional) 57
10. Hand mixer (optional) 56
10. Vent valve (optional) 56
11. Drain valve (optional) 56
Cylindrical tanks are available in transparent or black.They have a litre scale and a black screw cap, which can be locked‐ tank material : LLDPE, UV stabilised‐ liquid temperature: ‐20 to +45 degrees C
All cylindrical tanks are prepared for G 3/4 opening for a drain valve, and have a screw plug (PE/EPDM)The cylindrical tanks with volumes of 60, 100, 200, 300 and 500 litres additionally include:‐‐ threaded M6 inserts for the assembly of a SMART Digital, a DDI, or a DMX model 221 dosing pump‐ A G 2 opening for a suction lance or a foot valve, closed with a screw plug‐ A flange for an electric mixer with threaded inserts‐ Threaded M6 inserts at the bottom part for floor mounting with a set of floor mounting brackets
Diameter Max. height Max. immersion depth Product
mm mm mm number
‐ 420 420 350 3.4 96688081 204
‐ 460 590 545 5.5 98148805 161
yes " " " 5.5 98150038 251
‐ 460 840 795 7.5 98149057 212
yes " " " 7.5 98150051 321
‐ 670 810 770 11.5 98149215 307
yes " " " 11.5 98150053 453
‐ 670 1080 1040 13 98149245 375
yes " " " 13 98150055 557
‐ 790 1235 1175 28 98149266 719
yes " " " 28 98150057 1,004
‐ 1080 1260 1150 40 96688086 1,954
yes " " " 48 98173675 2,659
‐ 420 420 350 3.4 95701166 213
‐ 460 590 545 5.5 98149053 186
yes " " " 5.5 98150040 284
‐ 460 840 795 7.5 98149082 242
yes " " " 7.5 98150052 366
‐ 670 810 770 11.5 98149224 350
yes " " " 11.5 98150054 517
‐ 670 1080 1040 13 98149252 428
yes " " " 13 98150056 636
‐ 790 1235 1175 28 98149269 822
yes " " " 28 98150058 1,147
‐ 1080 1260 1150 40 95706305 2,247
yes " " " 48 98173752 2,826
Weight
black
40
60
100
200
300
Dosing tanks
Colour Tank volume
500
1000
300
500
1000
Suitable
for
agitator
100
200
Price
tran
sparent
40
60
54The closed, square tank has a screw cap and a mounting platform for one pump or two pumps in parallel.Pump mounting platform is higher than the screw cap to protect pumps and connections when filling chemicals.‐ Tank material|: MDPE‐ Weight: 15 kg‐ Wall thickness: 4 mm‐ Liquid temperature: ‐20 degs C to +45 degs C
SMART Digital pumps can be fitted directly on mounting platform by means of brass inserts moulded into the platform.The square tank is prepared for a G 3/4 drain valve. When using a rigid suction line in the tank, choose the counter nut for fixing (see Accessories for suction lances)
Product
number
96489271 188
Bund
500 x 545 96726831 228
500 x 700 96726832 282
770 x 595 98150059 438
770 x 960 96726834 705
860 x 980 95701272 1,029
1150 x 1080 96726836 1,774
Accessories for dosing tanks
Tank connection G 3/4"PVC 96689132 95
Ventilation valve Spring loaded, operating pressure 0.05 bar PVC/FKM/glass 96694401 19
96726979 946
Hand mixer for mixing chemicals in a tankPE 98133793 72
Set of floor mounting brackets98149921 30
for pump types DDA, DDC, DDE, DDI, DMX model 221Stainless steel 98159495 14
for pump types DDA, DDC, DDEStainless steel 95730862 14
for pump types DDA, DDC, DDE, DDI, DMX model 221PP 95730864 14
300 litre
Set of screw for mounting a SMART digital pump
on a 60 to 500 litre cylindrical tank
100
Price
Drain valve for installation in the threaded sleeve
of the dosing tank
Material
Price
75 litre 80 litre
For tank size VolumeProduct
number
400 litre
500 litre 500 litre
Specification
100 litre
Product
number
1000 litre 1000 litre
Description
Set of screws for mounting a pump on a 40 litre or
a 10000 litre tank
4 floor mounting brackets with fixing screws
120 litre
200 litre 210 litre
The catchment tray is available in several sizes to suit the respective tank size. It collect chemicals that might leak out
of the tank, and protects the environment. Material: PE. Colour: transparent
Dimensions (diameter x
height) [mm]
Price
Square tank, 100 litres
Tank volume
Set of screws for mounting a SMART digital pump
on a 100 litre square tank
Dissolving hopper for washing powders into the
dosing tank
With DN40 through‐bolt for connection at the dosing tank,
connection thread with DN20 adhesive coupling on the side for
connection at 25 x 1.9 mm PVC pipe for water
Shaft length 1200 mm, can be adapted to the tank, with DN15
through bolt for connecting to tank
Dosing tank electric agitators 55
Electric mixers from Grundfos are intended for the Min./Max. ambient temperature: 0 °C to +40 °C
mixing and dissolving of liquid, non‐abrasive, non flammable • Min./Max. liquid temperature: ‐10 °C to +45 °C
and non‐explosive chemicals – Dosing medium must be in the liquid phase.
• Max. relative humidity (non‐condensing):
consisently. 70 % at 40 °C, 90 % at 35 °C
The mixers run at 1500 rpm with a net frequency of 50 Hz, and are • Max. altitude above sea level: 1000 m
• Max. viscosity: 100 mPas with 90 W, 250 mPas with 250 W, 550 W
Single phase motors, 230 V, IP65, F Single phase
Tank
volumeColour
Tank
Part No.Materials kW
white 96688081 black 95701166white 98150038 0.09 98164569 713black 98150040white 98150051 0.09 98164606 731black 98150052white 98150053 0.25 98164987 750black 98150054white 98150055 0.25 98165172 806black 98150056white 98150057 0.25 98165253 862black 98150058white 98173675 0.55 98165287 956black 98173752white 96688081 black 95701166white 98150038 0.09 98164573 788black 98150040white 98150051 0.09 98164607 806black 98150052white 98150053 0.25 98164990 825black 98150054white 98150055 0.25 98165175 881black 98150056white 98150057 0.25 98165258 938black 98150058white 98173675 0.55 98165290 1,031black 98173752white 96688081 black 95701166white 98150038 0.09 98164575 1,106black 98150040white 98150051 0.09 98164609 1,125black 98150052white 98150053 0.25 98165152 1,144black 98150054white 98150055 0.25 98165177 1,200black 98150056white 98150057 0.25 98165259 1,256black 98150058white 98173675 0.55 98165304 1,350black 98173752
1000 lwith reinforced beam, for
direct mixer assembly
An electric mixer ensures that the liquid in the dosing tank is mixed
suitable for liquids with low to medium viscosity.
The following versions are available:
• 3 propeller sizes• Single‐phase or 3‐phase motors in 3 power sizes• Stainless‐steel shaft with PP propeller as a • PP‐coated stainless‐steel shaft with PP propeller• PP‐coated stainless‐steel shaft with PP motor
• 6 shaft lengths suitable for cylindrical Grundfos PE tanks with volumes between 60 l and 1000 l
40 ldo not use
electric mixer
PP shaft and impellor
with PP sealing flange
60 l
tank prepared, for
direct mixer
assembly300 l
500 l
500 l
100 l
200 l
300 l
500 l
1000 l
Stainless steel shaft
and impellor
Tank Description (see Dosing Tanks
above)
do not use
electric mixer
tank prepared, for
direct mixer
assembly
with reinforced beam, for
direct mixer assembly
40 ldo not use
electric mixer
PP shaft and impellor
60 l
tank prepared, for
direct mixer
assembly
100 l
200 l
300 l
40 l
60 l
100 l
200 l
1000 lwith reinforced beam, for
direct mixer assembly
Product
numberPrice
Dosing tank electric mixers 56
Three phase motors, 380‐415 V, IP65, F 3 phase
Tank
volumeColour
Tank
Part No.Materials kW
white 96688081
black 95701166
white 98150038 0.09 98165309 628
black 98150040
white 98150051 0.09 98165355 647
black 98150052
white 98150053 0.25 98165385 722
black 98150054
white 98150055 0.25 98165393 778
black 98150056
white 98150057 0.25 98165435 834
black 98150058
white 98173675 0.55 98165439 938
black 98173752
white 96688081
black 95701166
white 98150038 0.09 98165310 703
black 98150040
white 98150051 0.09 98165357 722
black 98150052
white 98150053 0.25 98165386 797
black 98150054
white 98150055 0.25 98165432 853
black 98150056
white 98150057 0.25 98165436 909
black 98150058
white 98173675 0.55 98165440 1,012
black 98173752
white 96688081
black 95701166
white 98150038 0.09 98165318 1,022
black 98150040
white 98150051 0.09 98165382 1,040
black 98150052
white 98150053 0.25 98165391 1,116
black 98150054
white 98150055 0.25 98165433 1,172
black 98150056
white 98150057 0.25 98165437 1,228
black 98150058
white 98173675 0.55 98165451 1,331
black 98173752
60 l
tank prepared, for
direct mixer
assembly
100 l
200 l
500 l
60 l
tank prepared, for
direct mixer
assembly
1000 lwith reinforced beam, for
direct mixer assembly
300 l
with reinforced beam, for
direct mixer assembly
40 ldo not use
electric mixer
PP shaft and impellor
40 ldo not use
electric mixer
PP shaft and impellor
with PP sealing flange
100 l
200 l
with reinforced beam, for
direct mixer assembly
300 l
500 l
1000 l
Price
40 ldo not use
electric mixer
Stainless steel shaft
and impellor
60 l
tank prepared, for
direct mixer
assembly
100 l
200 l
300 l
500 l
1000 l
Tank Description (see Dosing Tanks
above)Product
number
CONDITIONS OF SALE 1. INTERPRETATION 1.1 All references herein to ‘the Company’ shall be deemed to mean Grundfos Pumps
Limited. 1.2 All references herein to 'The Purchaser’ shall be deemed to mean anyone whether a
person or body corporate who places a purchase order with the Company for a Product.
1.3 The titles to the Conditions herein are for information only and shall not affect the construction or interpretation of these Conditions or any part thereof.
1.4 Reference herein to ‘Products’ shall be deemed to include reference to a product or part or parts thereof. ‘Products’ shall mean all goods or, where the context so admits, all services which the Company supplies to the Purchaser.
1.5 All references to 'Agreement' shall be deemed to mean these Conditions of Sale together with any schedules and attachments hereto specified by the Company to form part of the Agreement.
1.6 Restocking fees are a percentage of the original purchase price of the Product. 2. GENERAL 2.1 All Products are sold subject to the terms and conditions contained in the Agreement. The
Purchaser acknowledges that it has not relied on any representation not repeated in this Agreement.
2.2 No addition or variation may be made to the Agreement without the express written agreement of an authorised officer of the Company.
2.3 In the event of any conflict or inconsistency between these Conditions and the terms or conditions of any order or acceptance, these Conditions shall prevail.
2.4 The giving of any delivery instructions, the acceptance of, or payment for, any Products or any conduct in confirmation by the Purchaser of the transaction hereby contemplated shall constitute unqualified acceptance by the Purchaser of these Conditions.
2.5 Any special terms granted in respect of any one order are not applicable to any subsequent order without the express consent in writing of an authorised officer of the Company.
2.6 Neither party shall be liable to the other party for any delay or failure to meet its obligations (other than a payment obligation) under the Agreement due to any cause beyond its reasonable control. Without prejudice to the generality of the foregoing the following shall be regarded as causes beyond a party's reasonable control: 2.6.1 Act of God, explosion, flood, fire or accident; 2.6.2 War or threat of war, sabotage, civil disturbance or requisition, 2.6.3 Acts, restrictions, regulations, bye‐laws, prohibitions, or measures of any
kind on the part of any government, parliamentary or local authority; 2.6.4 Import or export regulations or embargoes; 2.6.5 Strikes, lock outs or other industrial actions or trade disputes; 2.6.6 Difficulties in obtaining raw materials, labour, fuel, parts or machinery; and 2.6.7 Power failure or breakdown in machinery.
3. ILLUSTRATIONS 3.1 All illustrations or descriptive material of any sort including drawings, specifications of
weight, capacity, dimensions, output and consumption are for information only and shall not form part of the Agreement. They are approximate only and no warranty or guarantee is given for their accuracy.
4. ORDERS AND SPECIFICATIONS 4.1 No purchase order submitted by the Purchaser will be deemed to be accepted by
the Company unless and until confirmed in writing by the Company's authorised representatives.
4.2 The Purchaser will be responsible to the Company for ensuring the accuracy of the terms of any purchase order (including any applicable specifications) submitted by the Purchaser and for giving the Company any necessary information relating to the Purchaser within a sufficient time to enable the Company to perform its obligations in accordance with the Agreement.
4.3 The Purchaser will be responsible to ensure that the Products, are suitable for their particular purpose and the Company will have no liability to the Purchaser if the Products are not suitable for their particular purpose for any reason.
4.4 The Company reserves the right at anytime to make such changes to the design, construction, or composition of the Products or the materials or equipment used in the Products, as it shall think fit without notifying the Purchaser.
5. CANCELLATION BY PURCHASER 5.1 No purchase order which has been accepted by the Company may be cancelled by the
Purchaser except with the agreement in writing of the Company and on terms that the Purchaser will indemnify the Company in full against all loss (including loss of profit) costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Company as a result of cancellation.
6. SAMPLES 6.1 Samples of Products are available for inspection at the Company's offices. The samples are
ex‐stock at the time of viewing and are without guarantee as to colour or dimensions at the time of delivery. The viewing of a sample does not create a sale by sample.
7. PRICE AND PAYMENT 7.1 The price of the Products will be the Company's quoted price or, where no price has
been quoted (or a quoted price is no longer valid), the price listed in the Company’s published price list current at the date of acceptance of the purchase order. Unless otherwise stated all prices quoted are valid for 30 days only or until earlier acceptance by the Purchaser after which time they maybe altered by the Company without giving prior notice to the Purchaser.
7.2 Unless a fixed price has been agreed in writing between the Company and the Purchaser, the Company reserves the right by giving notice to the Purchaser at any time before delivery to increase the price of the Products to reflect any increase in the cost to the Company which is due to any factors beyond the control of the Company (such as, without limitation, any foreign exchange fluctuation, currency regulations, alteration of duties, significant increase in the cost of labour, materials or other costs of manufacture) any change in delivery dates, quantities or specifications for the Products which is requested by the Purchaser or any delay caused by any instructions of the Purchaser or failure of the Purchaser to give the Company adequate information or instructions.
7.3 Except as otherwise stated under the terms of any quotation or in any price list of the Company, and unless otherwise agreed in writing between the Purchaser and the Company, all prices are given by the Company on delivered at place (DAP) basis.
7.4 The price is exclusive of any applicable value added tax which the Purchaser will be additionally liable to pay to the Company, at the rate prevailing at the date of invoicing.
7.5 Subject to any special terms agreed in writing between the Purchaser and the Company, the Company will be entitled to invoice the Purchaser for the price of the Products on or at any time after delivery of the Products unless the Products are to be collected by the Purchaser or the Purchaser wrongfully fails to take delivery of the Products in which event the Company will be entitled to invoice the Purchaser for the price at any time after the Company has notified the Purchaser that the Products are ready for collection or (as the case may be) the Company has tendered delivery of the Products.
7.6 Unless otherwise agreed, the Purchaser will pay the price of the Products (less any discount to which the Purchaser is entitled but without any other deduction) to be received by the Company not later than the last working day of the calendar month next following the date of the Company‘s invoice and the Company shall be entitled to recover the price notwithstanding that delivery may not have taken place and no property in the Products has not passed to the Purchaser. The time of payment of the price shall be of the essence of the Agreement.
7.7 If the Purchaser fails to make any payment on the due date then, without prejudice to any other right or remedy available to the Company, the Company shall be entitled to: 7.7.1 cancel the Agreement or suspend any further deliveries to the
Purchaser; 7.7.2 appropriate any payment made by the Purchaser to such of the Products (or
the goods supplied under any other contract between the Purchaser and the Company) as the Company may think fit (notwithstanding any purported appropriation by the Purchaser); and
7.7.3 charge the Purchaser interest (both before and after any judgment) on the amount unpaid at the rate of four percent per annum above Barclays Bank Plc base rate from time to time until payment in full is made.
7.8 The Company shall have a lien on all the Purchasers property in the Company's possession for all sums due at any time from the Purchaser to the Company subject to the Company giving to the Purchaser one month's notice in writing. The Company shall be entitled to use, sell and dispose of such property as agent for and at the expense of the Purchaser and apply the proceeds in and towards the payment of monies due and outstanding from the Purchaser to the Company. Thereafter the Company shall be discharged of any liability in respect of the Purchaser's property.
8. DELIVERY 8.1 Delivery of the Products will be made by the Company delivering the Products
to the named place of destination. 8.2 Any dates quoted for delivery of the Products are approximate only and the Company
will not be liable for any additional costs to the Purchaser arising out of any delay in delivery of the Products however caused. Time for delivery shall not be of the essence of the Agreement unless previously agreed by the Company in writing. The Products may be delivered by the Company in advance of the quoted delivery date upon giving reasonable notice to the Purchaser.
8.3 If the Purchaser fails to take delivery of the Products or fails to give the Company adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Purchasers reasonable control or by reason of the Company's fault) then, without prejudice to any other right or remedy available to the Company. The Company may: 8.3.1 store the Products until actual delivery and charge the Purchaser
for the reasonable costs (including insurance) of storage. There will be a 2% storage charge of the item value, payable per month, commencing one month after the goods have become available for delivery from Grundfos ; and
8.3.2 sell the Products at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Purchaser for the excess over the price under the Agreement or charge the Purchaser for any shortfall below the price under the Agreement.
8.4 If the Products have not been received by the Purchaser within 7 days of notification of dispatch by the Company, or if they have been received but are in a damaged condition or if the quantity received differs from the quantity advised by the Company as dispatched, the Purchaser shall immediately give notice in writing to the Company of the relevant facts. If such notice is not received within 10 days from notification of dispatch by the Company the Company will not be liable to the Purchaser in respect of any loss or damage suffered and the Purchaser shall accept liability as if all the Products had been received and shall not claim against the Company in respect of non or short delivery or damage in transit.
8.5 Where Products are offered for delivery to site the obligation of the Company is to deliver only as near to the site as a safe hard road permits. The Purchaser is to provide to the Company, free of charge, reasonable assistance in unloading.
8.6 If a proof of delivery is required a £10.00 net handling fee will apply. 8.7 A £20.00 net handling fee will be applied, per order, to all orders for spares,
pump components, spares kits, and ancillary items such as flanges, unions etc 9. TRANSFER OF PROPERTY 9.1 All Products shall remain the property of the Company as legal and equitable
owner and no property or title to the Products shall pass to the Purchaser until the full price has been paid to the Company together with the full price of any goods the subject of any other contract with the Company. Until payment in full, the Purchaser shall hold the Products as the Company's fiduciary agent and bailee and shall store the Products in such a way as to enable them to be identified as the property of the Company and shall not encumber the Products in any way. Failure to pay the price for the Products and that of such other goods referred to above when due shall, without prejudice to any other remedies the Company may have, entitle the Company to repossess the Products or so much thereof as the Company may determine from any promises where they may be. For the purpose of repossessing the Products or any part thereof the Purchaser hereby grants an irrevocable Licence to the Company, its employees or agents to enter upon such premises and the Purchaser shall pay to the Company the cost of removal and transfer of the Products or any part thereof.
9.2 The Purchaser may incorporate the Products in or with any other goods provided that any new goods manufactured or containing the Products shall become the sole and exclusive property of the Company and shall be separately stored and marked so as to be identifiable as being manufactured or as containing the Products which are the property of the Company.
9.3 The Purchaser may in the ordinary course of its business sell and deliver the Products or any goods produced with the Products in which the property remains with the Company to any third party as the Company's agent (but as principal vis‐a‐vis any third party), in a fiduciary capacity and for the account of the Company provided that the entire proceeds of sale are held in trust for the Company, are not mingled with any other monies and are at all times identifiable as the Company's monies the Purchaser shall upon request assign to the Company the legal title of any right against any third party arising out of such sale the beneficial interest of which is the Company's. The Purchaser shall be entitled to receive from the Company by way of commission the
excess of the proceeds of sale over the amounts due to the Company from the Purchaser.
9.4 If following the sale to a sub‐purchaser of any Product or any goods produced with any Product in which properly remains with the Company in accordance with Clause 9.3 hereof the Purchaser shall have a receiver or administrative receiver appointed and at the date thereof the Purchaser shall not have received the proceeds of sale of such Product or goods, the Purchaser or the receiver or administrative receiver as agent for the Purchaser, shall assign to the Company within 7 days all rights against the person or persons to whom the Product or goods have been sold.
9.5 The Purchaser shall not take any steps to apply for the appointment of an administrator without giving fourteen days written notice to the Company. From the date of the said notice, the Purchaser shall not be entitled to remain in possession of any of the Products.
9.6 Notwithstanding anything else contained in these Conditions risk in the Products shall pass to the Purchaser on delivery of the Products to the Purchaser's (or Purchasers agent's) vehicles or premises or otherwise in accordance with his purchase order.
10. WARRANTIES AND LIABILITY 10.1 Subject to clause 10.2 the Company warrants that the Products will be free from
defects in materials and workmanship throughout the Warranty Period. 10.2 The above warranty is given by the Company subject to the following conditions:
10.2.1 the Company will be under no liability in respect of any defect in the Products arising from any drawing, design or specification supplied by the Purchaser,
10.2.2 the Company will be under no liability in respect of any defect in the Products arising from:‐ (a) fair wear and tear; (b) accidental or willful damage or misuse; (c) incorrect installation; (d) failure to follow the Company's instructions (whether oral or in writing); (e) the use with the Products of water containing sand, salt or harmful chemicals; (f) inadequate motor projection; (g) the use of faulty ancillary equipment in conjunction with the Product; (h) lightening or other circumstances beyond the Company's control; and
10.2.3 under no circumstances should the Product be dismantled prior to return to the Company and any failure by the Purchaser to comply with this provision will render the warranty in clause 10.1 void.
10.2.4 As of 1st January 2010 all products are subject to a 24 month warranty period from the date of installation or 30 months from the date of manufacture unless otherwise stated.
10.2.5 Warranty repairs will only be carried out between the hours of 9am to 4pm Monday to Friday on dates agreed with the Purchaser.
10.2.6 It is the Purchaser's responsibility to ensure that there is available suitable lifting equipment and other reasonable facilities as required by the Company for maintenance and repairs to the equipment, otherwise the Purchaser will be liable for any additional costs incurred.
10.3 The Purchaser will notify the Company as soon as reasonably practicable and in any event within 14 days after becoming aware of any defect in the Products and will provide authority for the Company's employees or agents to inspect the Products.
10.4 Where any valid claim is made by the Purchaser that the Products are defective then the Company will at its discretion and at its cost either repair or replace the Products (or the part in question), free of charge on an exchange basis. The Purchaser will if required by the Company but at the cost of the Purchaser remove the Product and return it to the Company for repair or replacement. The Purchaser will be responsible for the costs of returning the repaired or replacement Product to the Purchaser and the costs of refitting the Product.
10.5 Subject to clause 10.11 the Company will have no other or further liability to the Purchaser and whether for breach of the Agreement, negligence or otherwise in respect of any direct loss or damage suffered by the Purchaser arising from or in connection with any defect in the Product.
10.6 Subject to clause 10.11 the Company will have no other or further liability to the Purchaser and whether for breach of the Agreement, negligence or otherwise in respect of any consequential loss or damage suffered by the Purchaser arising from or in connection with any defect in the Product.
10.7 The Company's liability for any direct loss or damage sustained by the Purchaser as a result of any error in any weight, dimension, capacity performance or other description or information which has formed a representation or is part of the Agreement will not exceed the price of the Products in respect of which the description or information is incorrect.
10.8 Except for the terms implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of The Supply of Goods and Services Act 1982, all conditions warranties and other terms express or implied, statutory or otherwise are expressly excluded except insofar as they are contained in these Conditions or otherwise expressly agreed by the Company in writing. If any legislation makes it unlawful to exclude or purport to exclude any term from the Agreement. This clause will not apply to such term.
10.9 Subject to clause 10.11 the Company will not be liable to the Purchaser in respect of any direct loss or damage suffered by the Purchaser arising from the negligence of the Company or the negligence or wilful default of the Company's employees or agents in connection with the supply of the Products or the design or manufacture hereof.
10.10 Subject to clause 10.11 the Company will not be liable to the Purchaser in respect of any consequential loss or damage suffered by the Purchaser arising from the negligence of the Company or the negligence or willful default of the Company's employees or agents in connection with the supply of the Products or the design or manufacture hereof.
10.11 The terms of clause 10.5, 10.6, 10.9 and 10.10 will not exclude any liability of the Company: 10.11.1 for death or personal injury resulting from the negligence of the Company
or the negligence or willful default of the Company's employees or agents; or
10.11.2 for damage to property resulting from no negligence of the Company or the negligence or willful default of the Companies employees or agents except that such liability will be limited to £900,000 per occurrence.
10.12 Except in respect of liability for death or personal injury resulting from negligence, the Company will not be liable to the Purchaser under any circumstances (and whether arising from breach of the Agreement or the negligence of the Company or its employees or agents or otherwise) for any indirect special or consequential loss or damage including without limitation loss of Production, loss of profits, loss of contracts or goodwill suffered by the Purchaser which arise out of or in
connection with the supply of the Products or their use or resale by the Purchaser even if such loss was reasonably foreseeable or the Company had been advised of the possibility of the Purchaser incurring the same.
10.13 The Company will not be liable to the Purchaser in respect of any claims pursuant to the Consumer Protection Act 1987 which may be brought against the Purchaser by third parties in respect or defects in the Products and the Purchaser will fully indemnify the Company against all damages, penalties, costs and expenses incurred by the Company arising from any such claims which may be brought against the Company by third parties except in either case insofar as the defects in the Products have arisen as a result of the negligence of the Company or the negligence or willful default of the Company's employees or agents.
11. RETURN OF PRODUCTS 11.1 Products may not be returned to the Company except by prior written
permission of an authorised officer of the Company and such return shall be at the risk of the Purchaser and subject to payment by the Purchaser of handling and restocking fees, transport and all other costs incurred by the Company. All items requested to be returned to Grundfos will be subject to a minimum 35% restocking fee (subject to inspection). Goods must be returned in their original packaging and within 6 months of date of dispatch. All returns will be subject to inspection, to ascertain age, condition and product type and can incur an increased restocking fee. Contact [email protected] with the original purchase order number, to arrange collection. Should products be returned to the Company without prior consent they will be refused delivery. Items with a net value of £125.00 (per item) or less cannot be returned for credit. Pump Repair Kits, Power Cable, Engineered to Order, 3rd party sourced and Obsolete product cannot be returned for credit.
11.2 Sololifts are excluded from product returns. In the event of a warranty liability the Purchaser should contact the service organisation.
11.3 If any Product has been in contact with hazardous liquids then the Company requires the Purchaser to complete a COSHH certification prior to return of the goods.
11.4 For avoidance of doubt under no circumstances will bespoke products be accepted for returns
12. INSOLVENCY OF THE PURCHASER 12.1 This clause applies if:
12.1.1 the Purchaser is in breach of any of its obligations under the Agreement and fails to remedy the breach within 7 days of receipt of notice from the Company specifying the breach and requiring its remedy; or
12.1.2 the Purchaser makes any voluntary arrangement with its creditors or (being an individual or firm) petitions for bankruptcy or becomes bankrupt or (being a company) passes a resolution or proposal to go into administration or liquidation or becomes subject to an administration order or goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or
12.1.3 an encumbrancer takes possession or a receiver is appointed of any of the property or assets of the Purchaser; or
12.1.4 the Purchaser ceases or threatens to cease to carry on business; or 12.1.5 the Company reasonably apprehends any of the events mentioned above is
about to occur in relation to the Purchaser and notifies the Purchaser accordingly.
12.2 If this clause applies then, without prejudice to any other right or remedy available to the Company, the Company will be entitled to cancel the Agreement or suspend any further deliveries under the Agreement without any liability to the Purchaser and if the Products have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.
13. SERVICE
13.1 If the Agreement includes an obligation for the Company to undertake servicing of the Products/provide services/carry out repairs to the Purchasers goods the Purchaser shall pay the price stipulated in the Agreement for such service upon collection or the purchaser's goods or 28 days following the date of issue of notification by the Company to the Purchaser that the service has been completed whichever shall be the earlier.
13.2 If payment of the price referred to in clause 13.1above is not made on or before the due date the Company shall be entitled to charge interest in accordance with the provisions of clause 7.7.3 above.
14. MINIMUM ORDER VALUE
14.1 Our minimum order value is £55.00 NET. Orders between the minimum order value and the low order threshold of £335.00 NET for pumps or £130.00 NET for Category 4 items will be subject to a £37 net handling fee.
15. JURISDICTION
15.1 The Agreement is subject solely to English law and any dispute arising here from shall be settled in accordance therewith.
GRUNDFOS PUMPS LTD.Grovebury Road Leighton Buzzard Beds LU7 4TL
Tel: 01525 850000Email: [email protected]
www.grundfos.co.uk
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
GB/
PRIC
ELIS
T-CA
T5/0
5-10
-201
6