Grinder Catalogue
-
Upload
al-jarnas-general-trading -
Category
Documents
-
view
250 -
download
8
description
Transcript of Grinder Catalogue
Angle GrinderCatalogue
Index
2
Super joint System (SJS)
N9500N
9520B / 9521NB / 9552NB 03
03
049553HN / 9554HN / 9555HN / 9556HN / 9557HN / 9558HN
05GA4030 / GA4530 / GA5030
GA4034 / GA4534 / GA5034 06
079556HP / 9557HP / 9558HP
089015B / 9016B
GA5010 / GA6010 / GA5011 09
10
9563HZ / 9564HZ / 9565HZ 11
9561CR / 9562CR
129564PZ / 9565PZ
9563C / 9564C / 9564CV / 9565C / 9565CVL
13
14
GA7001
15
9067HB / 9069HB
GA7050 / GA7050R / GA9050 / GA9050R
16
16
GA7020 / GA7030 / GA7040S / GA9020 / GA9030 / GA9040S
Abrasive disc
Accessories
17
18
19
Cutting wheels and Grinding wheels
Thin cutting wheels
21
Aluminium wheel
Long life metal cutting wheel
22
Wire cup brush
Wire cup brush (T-series)
22
Flap disc chart
22
23
Flap disc
24
Abrasive disc and related accessories
25
Dust collceting wheel guard
Wheel cover
26
Safety cutting flanges
27
27
Super flange
Dust cover attachment
Lock nut wrench
Grip
Diamond Wheels Chart
28
28
28
28
28
Offset diamond wheel / Diamond cup wheel
Electro deposited diamond wheel
Ring
Daimond Wheels (Segmented / Segmented dry / Corugated / Corrugated rim) 30
31
31
31
29
20
Contents Page
9564PC / 9565PC
N9500N100mm (4”)
Popular and classic Angle Grinder
Operation switch is located on tail
Can be used with grinding wheel oroptional diamond wheel
Continuous rating inputDepressed center wheel : Abrasive disc : Cut-off wheel: Wire cup brush : No load speedOverall lengthNet weightPower supply cord
570W100mm (4")100mm (4")110mm (4-3/8")75mm (3")12,000rpm245mm (9-5/8")1.8kg (3.9lbs)2.5m (8.2ft)Standard Equipments:
Depressed Centre Wheel, Lock Nut Wrench.
9520B / 9521NB / 9522NB100mm (4”) 115mm (4 -1/2”) 125mm (5”)
Incredibly light, yet powerful one-hand grinder with slender barrelgrip and reduced noise.
Powerful grinding from an amazingly slim and trim angle grinder.
Available in 127V, 220V, 240V(for 9522NB:127V, 220V only)
Carbon Brush Size
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Grip.
Angel GrindersMakita Develops different types of angle grinders to suit the proffesional needs
670WATTS
Continuous rating inputDepressed center wheel Abrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
670 W100 mm (4”)100 mm (4”)110 mm (4-3/8”)75 mm (3”)12,000 rpm259 mm (10-3/16”)1.3 kg (2.9 lbs)2.5 m (8.2 ft)
670 W115 mm (4 – 1/2”)115 mm (4 – 1/2”)115 mm (4 – 1/2”)90 mm (3-1/2”)12,000 rpm262 mm (10 – 3/8”)1.3 kg (2.8 lbs)2.5 m (8.2 ft)
670 W125 mm (5”)125 mm (5”)125 mm (5”)90 mm (3-1/2”)9,500 rpm262 mm (10-3/8”)1.3 kg (2.9 lbs)2.5 m (8.2 ft)
411
570WATTS
Available in 127V, 220V, 240VCarbon Brush Size 411
9520B 9521NB 9522NB
Double Insullation
3
325
9553HN / 9554HN / 9555HN 9556HN / 9557HN / 9558HN
100mm (4”) 115mm (4 -1/2”) 125mm (5”)Available in 127V, 220V, 240V
Carbon Brush Size
840WATTS
710WATTS
710/840W Power Anti-Dust Motor
Generates more wattage and torque which helpsreduce the possibility of overload.
Armature coated with protective zigzag varnish and Fieldcoated with powder varnish protects the motor from dustand wire breakage, ensuring more durability for any heavyapplication.
Powder varnishProtects all ball bearings from dust and debrisLabyrinth construction
O Rings for Protection from Grease-Leakage
At the Lock Nut Pin Close to the bearing
Can be positioned at every 90°.Dust-Proof Ball BearingRotatable gear housing
Zig-Zag varnish
The “O” rings around the gear housing have been specially placed to prevent grease leakage, thisultimately increases the life of the gears
Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
710W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm258mm (10-1/8")1.8kg (3.9lbs)2.5m (8.2ft)
710W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)10,000rpm258mm (10-1/8")1.8kg (4.1lbs)2.5m (8.2ft)
710W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)10,000rpm258mm (10-1/8")1.9kg (4.2lbs)2.5m (8.2ft)
840W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm271mm (10-5/8")1.9kg (4.2lbs)2.5m (8.2ft)
840W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm271mm (10-3/4")2.0kg (4.5lbs)2.5m (8.2ft)
840W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm271mm (10-5/8")2.1kg (4.5lbs)2.5m (8.2ft)
9553HN 9554HN 9555HN 9556HN 9557HN 9558HN
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
4
GA4030 / GA4530 / GA5030100mm (4”) 115mm (4 -1/2”) 125mm (5”)
Slim motor housing with a small circumference of 179mm- Motor housing and rear cover ergonomically and uniquely ribbed for sure and comfortable gripping.- Rear cover ergonomically tapered for easy gripping.- Ergonomic 20º side grip angle.
Extra-high reliability and durabilityHigh quality motor with excellent heat-resistance
Very comfortable in any gripping way
459Available in 127V, 220V, 240V
Carbon Brush Size
720WATTS
Reliable machined bevel gears
- Dust-proof ball bearings- Motor-field coated with protective powder varnish- Two labyrinth rings seal the ball bearings and entirely protect the gears and the motor from dust and dirt.
Protection against dust
GA4030 GA4530 GA5030Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
720W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm266mm (10-1/2")1.7kg (3.7lbs)2.5m (8.2ft)
720W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm266mm (10-1/2")1.8kg (4.0lbs)2.5m (8.2ft)
720W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm266mm (10-1/2")1.8kg (4.0lbs)2.5m (8.2ft)
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
5
GA4034 / GA4534 / GA5034100mm (4”) 115mm (4 -1/2”) 125mm (5”)
Slim motor housing with a small circumference of 186mm
Paddle Switch
- Motor housing and rear cover ergonomically and uniquely ribbed for sure and comfortable gripping.- Rear cover ergonomically tapered for easy gripping.- Ergonomic 20º side grip angle.
Extra-high reliability and durabilityHigh quality motor with excellent heat-resistance
Very comfortable in any gripping way
459
Available in 220V, 240V
Carbon Brush Size
720WATTS
Reliable machined bevel gears
- Dust-proof ball bearings- Motor-field coated with protective powder varnish- Two labyrinth rings seal the ball bearings and entirely protect the gears and the motor from dust and dirt.
Protection against dust
GA4034 GA4534 GA5034Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
720W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm265mm (10-3/8")1.8kg (4.0lbs)2.5m (8.2ft)
720W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm265mm (10-3/8")1.9kg (4.2lbs)2.5m (8.2ft)
720W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm265mm (10-3/8")1.9kg (4.2lbs)2.5m (8.2ft)
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
Ergonomically designed to provide easy on/off switching by the hand gripping motor housing, allowing for comfortable, continue operation equipped a lock-off button to prevent accidental start.
Double Insullation
6
Paddle SwitchDead man Switch
325
9556HP / 9557HP / 9558HP100mm (4”) 115mm (4 -1/2”) 125mm (5”)
Available in 127V, 220V, 240V (for 9556HP / 9557P)Available in 127V, 220V (for 95568HP)
Carbon Brush Size
840WATTS
High Power Anti-Dust Motor
Generates more wattage and torque which helps reduce thepossibility of overload.Armature coated with protective zigzag varnish and Fieldcoated with powder varnish protects the motor from dustand wire breakage, ensuring more durability for any heavyapplication.
Powder varnish
Protects all ball bearings from dust and debrisLabyrinth construction
O Rings for Protection from Grease-Leakage
At the Lock Nut Pin Close to the bearing
Can be positioned at every 90°.
Dust-Proof Ball Bearing
Rotatable gear housing
Zig-Zag varnish
The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases thelife of the gears
Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
840W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm273mm (10-3/4")2.0kg (4.3lbs)2.5m (8.2ft)
840W115mm (5")115mm (5")115mm (5")90mm (3-12”)11,000rpm273mm (10-3/4")2.1kg (4.5lbs)2.5m (8.2ft)
840W125mm (5")125mm (5")125mm (5")90mm (3-12”)11,000rpm273mm (10-3/4")2.1kg (4.5lbs)2.5m (8.2ft)
9556HP 9557HP 9558HP
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
Double Insullation
Easy-to-operate paddle type on/off switch
- With non-slip pattern on the surface of paddle lever for easy on-off control - The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.
Paddle switch
Lock-off button
7
Paddle SwitchDead man Switch
9015B / 9016B125mm (5”) 150mm (6”)
303Available in 127V, 220V, 240V
Carbon Brush Size
1050WATTS
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
High power & Heavy-Duty motor More Durable Gears and Bearings
RotationGear housing can be screwed into the housing at any direction by 90 especially for cutting operation
Large spindle lockcan be easily preseed
Large and comfortable trigger switch
More efficient cooling system for motor.
• Gears are lubricated by securely sealed grease in gear room• Bearings are protected from dust/dirt by
Labyrinth construction
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
1,050W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)10,000rpm381mm (15")2.4kg (5.3lbs)2.5m (8.2ft)
1,050W150mm (6")150mm (6")150mm (6")90mm (3-1/2”)9,000rpm381mm (15")2.4kg (5.3lbs)2.5m (8.2ft)
9016B9015B
More comfortable and easier operation with larger triggerswitch and spindle lock button
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip. It will be discontinued once the current stock is over
8
GA5010 / GA6010GA5011
125mm (5”)
150mm (6”) 303Available in 127V, 220V, 240V (for GA5011 / GA6010)
Available in 220V (for GA5011)
Carbon Brush Size
1050WATTS
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
High power & Heavy-Duty motor
Motor housing features circumference (253mm)
Slim and Compact Motor Housing
Small gear housing for Increased Maneuverability
Large shaft lock button for easy press
Ergonomically designed rubberized gripprovides more control and comfort.
B
More Durable Gears and Bearings • Gears are lubricated by securely sealed grease in gear room• Bearings are protected from dust/dirt by
Labyrinth construction
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Two Trigger Types Available
Single-finger trigger(for GA5010, GA6010)
Large type trigger
(for GA5011)
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
1,050W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm356mm (14")2.6kg (5.8lbs)2.5m (8.2ft)
1,050W150mm (6")150mm (6")150mm (6")90mm (3-1/2”)10,000rpm356mm (14")2.7kg (5.9lbs)2.5m (8.2ft)
GA5011 GA60101,050W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm384mm (15-1/8")2.6kg (5.8lbs)2.5m (8.2ft)
GA5010
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
9
With the rotation of the armature the coil spring is extended, its
tightening force increases the grasp of the coil on the armature
spindle and shaft. At this point the gear and spindle start to rotate
simultaneously
9563HZ , 9564HZ,9565HZ
The Makita Super Joint System is in place for the wellbeing of both the user and their tools. The Super Joint System will instantly disengage
a tools motor at the sign of any sudden, overbearing force or pressure that may be caused by a snag on the blade.
This means that of all the unexpected things that could occur while you're on the work site, your machine running off from you and causing
harm won't be one of them.
Of course, the other benefit of the Super Joint System is the longevity it affords your equipment. By removing the strain that can be put on
a motor at times, by disengaging it's unlikely for any parts to grind or overload and so prevent any needed repairs or even replacements.
SJS is an advanced drive system based on a coil spring which wraps around the internal drive spindle.
- The Super Joint System (SJS) delivers the optimum power and torque to the grinder disc, so you get the top performance.
- SJS means greater durability. The way SJS engages means the motor and gears are protected from shock at start-up or if the grinder grabs.
- The SJS drive system is based on a coil spring which engages more gradually at start-up and instantly disengages if the grinder grabs
SJS - Super Joint System
Tightens
Grinders with Super Joint System
Against the shock of accidental spindle lock or overload, which
surpasses the limited torque designed for the tool, the coil
spring will override the armature shaft preventing damage to
the armature and internal components.
Loosens
10
Spiral bevel gear
Armature shaft
Coil-spring
Page no 11
9564PZ, 9565PZ(Paddle switch)
Page no 12
9564PC, 9565PC(Paddle switch)
Page no 15
9561CR, 9562CR(Anti Restart function)
9563C, 9564C, 9564CV,9565CV, 9565CVL
Page no 13 Page no 14
9563HZ / 9564HZ / 9565HZ100mm (4”) 115mm (4 -1/2”) 125mm (5”) 325
Available in 127V, 220V, 240VCarbon Brush Size
1100WATTS
Standard Equipments: Lock Nut Wrench, Side Grip (Tool does not come with depressed centre wheel)
9563HZ 9564HZ 9565HZContinuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
1,100W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm299mm (11-3/4")2.1kg (4.6lbs)2.5m (8.2ft)
1,100W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm299mm (11-3/4")2.3kg (5.1lbs)2.5m (8.2ft)
1,100W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm299mm (11-3/4")2.3kg (5.1lbs)2.5m (8.2ft)
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
More Durable Gears and Bearings• Gears are lubricated by securely sealed grease in gear room
• Bearings are protected from dust/dirt by Labyrinth construction • New Field with superior wiring technology leads to higher wattage without motor-size expansion. • The successors inherit slim body, zigzag varnishment on armature and powder varnishment on field from the predecessors
Easy-to-Grip Shape
Internal brush holders enable the machine circumstance to be flatwithout protrusions.
High power & Heavy-Duty motor
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Double Insullation
11
9564PZ / 9565PZ115mm (4 -1/2”) 125mm (5”)
318Available in 127V, 220V, 240V
Carbon Brush Size
1,100WATTS
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
More Durable Gears and Bearings• Gears are lubricated by securely sealed grease in gear room
• Bearings are protected from dust/dirt by Labyrinth construction
Easy-to-operate paddle type on/off switch
• With non-slip pattern on the surface of paddle lever for easy on-off control • The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.
Paddle switch
Lock-off button
Easy-to-Grip Shape
Internal brush holders enable the machine circumstance to be flatwithout protrusions.
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Cup wire brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
1,100W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)
9565PZ1,100W125mm (5")125mm (5")125mm (5")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)
9564PZ
Standard Equipments: Lock Nut Wrench, Side Grip. (Tool does not comes with depressed centre wheel)
12
Paddle SwitchDead man Switch
9561CR / 9562CR115mm (4 -1/2”) 125mm (5”) 318
Available in 127V, 220V, 240VCarbon Brush Size
1200WATTS
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
More Durable Gears and Bearings - Gears are lubricated by securely sealed grease in gear room- Bearings are protected from dust/dirt by Labyrinth construction
Anti-Restart Functionprevents accidental startup
Even if plugged in with the switch “ON”, the tool does not start with a blinking red light for visualwarning.
Easy-to-Grip Shape
Internal brush holders enable the machine circumstance to be flatwithout protrusions.
Electronic Limiter & Electronic Controller• Stops the current to protect the motor from burning when there is accidental overload on the machine.• Restarts the motor automatically when the machine is freed from the load again.• The constant speed control keeps minimizing the speed loss under loaded conditions and enables highly efficient operation.• The soft starter suppresses the rotation speed for seconds at startups to reduce the starting shock.
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
Double Insullation
Soft Start
Constant Speed
9561CRContinuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
1,200W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm289mm (11-3/8")2.2kg (4.9lbs)2.5m (8.2ft)
9562CR1,200W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm289mm (11-3/8")2.2kg (4.9lbs)2.5m (8.2ft)
13
9563C 9564C 9565CV9564CV 9565CVL100mm (4”)
115mm (4 -1/2”) 125mm (5”)
318Available in 127V, 220V, 240V
Carbon Brush Size
1400WATTS
9563C 9564C 9564CVContinuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
1,400W100mm (4")100mm (4")100mm (4")75mm (3”)12,000rpm299mm (11-3/4")2.1kg (4.6lbs)2.5m (8.2ft)
1,400W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)12,000rpm299mm (11-3/4")2.4kg (5.2lbs)2.5m (8.2ft)
1,400W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)2,800 - 12,000rpm299mm (11-3/4")2.4kg (5.2lbs)2.5m (8.2ft)
9565CV1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)2,800 - 12,000rpm299mm (11-3/4")2.4kg (5.2lbs)2.5m (8.2ft)
9565CVL
9565CVL
1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)2,000 - 7,800rpm311mm (12-1/4")2.1kg (4.6lbs)2.5m (8.2ft)
High power & anti-dust motor In small sircumference barrel grip body.
Armature coated with protective zigzag varnish and Field coated with powder varnish protects the motor from dust and wire breakage, ensuring more durability for anyheavy application.
Powdervarnishment
Zigzagvarnishment
Easy-to-Grip Shape Internal brush holders enable the machine circumstance to be flatwithout protrusions
More Durable Gears and Bearings
Equiped with Electronic Control Electronic limiter Speed control dial
Gears are lubricated by securelysealed grease in gear room Bearings are protected from dust/dirt by Labyrinth construction
For keeping constant rotation speed evenunder loaded condition, and for soft start.
Stops the electric current when accidental overload on the machine, and protects motor from burning. And when themachine will be freed from the load, restart the motor automatically.
For getting optimum rotatingspeed to suit various workpiece.
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
Plastic Head Cover
Hook-and-loop systemabrasive paperEasy and quick changeof abrasive paper
Making it easy to grip gear housing,is required for stonework.
Ideal for sanding applications in low speed
9556CVLlow speed version of Model 9564CV and 9565CV
Only for Model 9564CV / 9565CV / CVL
Double Insullation
Variable Speed
Soft Start
- -
Constant Speed
14
9565PC115mm (4 -1/2”) 125mm (5”)
9564PC /318
Available in 127V, 220V
Carbon Brush Size
1,400WATTS
Protective powder Vanish-coating on
field
Zigzag varnishing on
Armature
More Durable Gears and Bearings• Gears are lubricated by securely sealed grease in gear room
• Bearings are protected from dust/dirt by Labyrinth construction
Easy-to-operate paddle type on/off switch
• With non-slip pattern on the surface of paddle lever for easy on-off control • The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.
Paddle switch
Lock-off button
Easy-to-Grip Shape
Internal brush holders enable the machine circumstance to be flatwithout protrusions.
Grease sealing O-ringLabyrinth construction
Dust proof washerDust proof bearing
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Cup wire brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
9565PC
Soft Start
Constant Speed
9564PC1,400W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2)11,500rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)
1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)
• The constant speed control keeps minimizing the speed loss under loaded conditions and enables highly efficient operation.
• The soft starter suppresses the rotation speed for seconds at startups to reduce the starting shock.
• Stops the current to protect the motor from burning when there is accidental overload on the machine. • Restarts the motor automatically when the machine is freed from the load again.
Electronic ControllerElectronic Limiter
Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.
15
Paddle SwitchDead man Switch
16
GA7001180mm (7”)
153Available in 220V
Carbon Brush Size153Carbon Brush Size
2000WATTS
1650WATTS
Extra heavy duty motor for high production
Durable aluminium body
Unique design
Rugged Metal Housing for Long Tool Life
Plastic handle protect the operators from electric shock
Mouting angle of handle can be changed at every 90° in order tobe employed for cutting
Standard Equipments: Depressed Center Wheels x 2, Lock Nut Wrench, Grip.
Continuous rating input
Depressed center wheel Cut-off wheelAbrasive disc Wire cup brush No load speedOverall lengthSpindle threadNet weightPower supply cord
115V : 1,650 W220 - 240V : 2,000 W180 mm (7”)180 mm (7”)180 mm (7”)110 mm (4-3/8”)8,000 rpm411.5 mm (16-1/4”)DIN type5.7 kg (12.6 lbs)2.5 m (8.2 ft)
Available in 127V
9607HB / 9609HB180mm (7”) 230mm (9”)
153Available in 220V, 240VCarbon Brush Size
2000WATTS
Standard Equipments: Lock Nut Wrench, Grip (Tool does not come with depressed center wheel).
It will be discontinued once the current stock is over
A tough contender, very rugged and powerful with double insulation.
Precision gearing plus all ball bearing construction.
Shaft lock up front for easy wheel/attachment changes.
Three-way tool rest on top.
Reversible side grip.
Continuous rating inputDepressed center wheel Abrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord
2,000 W180 mm (7”)180 mm (7”)180 mm (7”)110 mm (4-3/8”)8,000 rpm413 mm (19-1/16”)5 kg (11 lbs)2.5 m (8.2 ft)
9607HB2,000 W230 mm (9”)230 mm (9”)230 mm (9”)110 mm (4-3/8”)6,200 rpm413 mm (19-1/16”)5.3 kg (11.6 lbs)2.5 m (8.2 ft)
9609HB
Double Insullation
Superior Anti-Dust StructureProtective zigzag varnish on armature coil.Protective powder vanish-coating on field coil.Bearing-protective labyrinth construction.Vent slots designed to minimize dust entrance.
Zigzag varnish
powder vanish-coating
GA7050R / GA9050RGA7050 / GA9050
230mm (9”)180mm (7”)
204Available in 127V, 220V, 240V
Carbon Brush Size
2,000WATTS
Excellent Heat Resistance Grinders
Large Trigger Switch Large trigger switch with lock-on featurefor continuous operation.
Most Compact Lightweight and Compact body,Reducing operator fatigue incontinuous use
Anti-restart function (GA9050R / GA7050R)Prevents accidental start-up for safetyeven if the tool is plugged to power source with the lock-on switch on.
Solid Green indicates thatcurrent can be applied to thecircuit.
Blinking Red warns thatAnti-restart function is activated
Vibration Absorbing Side Grip (option)
Rotatable gear housing Can be positioned at every 90 degrees (left and right ) to suit most cutting and grindingoperations.
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Cup wire brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
Anti Restart Function
2,000W180mm (7")180mm (7")180mm (7")110mm (4-3/8”)8,500rpm455mm (17-7/8")4.6kg (10.1lbs)2.5m (8.2ft)
2,000W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm432mm (17")4.7kg (10.4lbs)2.5m (8.2ft)
2,000W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm455mm (17-7/8)4.8kg (10.6lbs)2.5m (8.2ft)
GA7050R GA9050 GA9050R
Soft Start -
2,000W180mm (7")180mm (7")180mm (7")110mm (4-3/8”)8,500rpm432mm (17")4.5kg (9.9lbs)2.5m (8.2ft)
GA7050
-
-
-
The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases the life of the gears and the felt ring prevents thegrease from entering into the motor section
“O“ Rings and Felt Rings for Protectionfrom Grease Leakage
Small gear housingMakes maximum cutting depth larger
Standard Equipments: Lock Nut Wrench 35, Side Grip (Tool does not comes with depressed centre wheel).
17
Superior Anti-Dust StructureProtective zigzag varnish on armature coil.Protective powder vanish-coating on field coil.Bearing-protective labyrinth construction.Vent slots designed to minimize dust entrance.
Zigzag varnish
powder vanish-coating
GA7030 / GA9030GA7020 / GA9020
GA7040S / GA9040S230mm (9”)180mm (7”)
204Available in 127V, 220V, 240V
Carbon Brush Size
2,600WATTS
2,400WATTS
2,200WATTS
Machined Bevel GearHaving durability higher than sintered gear.
Push the Button...
Excellent Heat Resistance Grinders
Low Vibration Rear Handlewith Soft grip for more comfortand control.
Large Trigger Switch Large trigger switch with lock-on featurefor continuous operation.
Vibration Absorbing Side Grip (option)
Electronic Limiter
Vibration Absorbingrubber
Rotatable rear Handle (Only for GA70430/40S andGA9030/40S) Can be positioned to suit soft grip for morecomfort and control
and rotate 90 degrees
Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Cup wire brushNo load speedOverall lengthNet weightPower supply cord
Double Insullation
2,400W180mm (7")180mm (7")180mm (7")110mm (4-3/8”)8,500rpm511mm (20-1/8")6.0kg (13.3lbs)2.5m (8.2ft)
2,600W180mm (7")180mm (7")180mm (7")110mm (4-3/8”)8,500rpm511mm (20-1/8")6.4kg (14.2lbs)2.5m (8.2ft)
2,400W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm503mm (19-3/4")6.3kg (13.9lbs)2.5m (8.2ft)
2,600W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm503mm (19-3/4")6.7kg (14.8lbs)2.5m (8.2ft)
GA7030 GA7040S GA9030 GA9040S
Soft Start
Electronic Limiter
-
-
2,200W180mm (7")180mm (7")180mm (7")110mm (4-3/8”)8,500rpm473mm (18-5/8")5.5kg (12.2lbs)2.5m (8.2ft)
GA7020
- -
2,200W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm473mm (18-5/8")5.8kg (12.8lbs)2.5m (8.2ft)
GA9020
-
-
Stops the electric current when accidental overload on the machine, and protects motor from burning and when the machine will be freed from the load, restart the motor automatically.
The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases the life of the gears and the felt ring prevents thegrease from entering into the motor section
“O“ Rings and Felt Rings for Protectionfrom Grease Leakage
(Only for GA7030/40S GA9030/40S)
(Only for GA7040S and GA9040S)
Standard Equipments: Lock Nut Wrench 35, Side Grip (Tool does not comes with depressed center wheel).
18
Abrasive DiscAccessories
How to read the spec. Aluminum Oxide Group
Grit Size
Hardness of grinding wheel
Type of Bond
EN Standard
Pictograms for safety use
Application
Color code
Spec
Validity
OSA mark(Organization Safety Abrasives)
Max operating speed
SizePart number
Brown Fused Aluminum :
Closer to A, softer grinding wheel is Closer to Z, harder grinding wheel is
Main component is phenol resinMechanically strong, but weak against moisture and high heat
Resin Bonded = Resinoid(BF)
Soft grinding wheel Hard work piece
A
White Aluminum Oxide :
Black Silicon Carbide :
Alumina Zirconium :
Coarse Fine
WA
C
Z
24 36 60 80 120
Hard grinding wheel Soft work piece
Very Soft Soft Middle Hard Very Hard
A - G H - K L-O P - S T - Z
Blue: Matale
Gold: INOX
Green: Masonry
Silver: Aluminum
19
Thin Cutting WheelB-series - Flat Center
Thin Cutting Wheel
Thin Cutting Wheel
(for stainless steel)
(for stainless steel)
D-series - Flat Center
• Fast Cutting.• No Burn Mark and Bur.• Can Cut Steel, Stainless Steel, Aluminium & Copper.
1mmmm1thickness
**
*** 1.6mm thickness for 150/180mm wheel* 1.9mm thickness for 230mm wheel
100x1.0x16mm115x1.0x22.23mm
125x1.0x22.23mm
150x1.6x22.23mm
Inox A60TInox A60T
Inox A60T
Inox A60T
B-12201
B-12217
B-12239
B-12251
15,300
13,300
12,250
10,200
10pcs Shrink Wrapped
10pcs Shrink Wrapped
10pcs Shrink Wrapped
10pcs Shrink Wrapped
10pcs Shrink Wrapped 10pcs Shrink Wrapped
4sets = 40pcs per box
5sets = 50pcs per box
5sets = 50pcs per box
4sets = 40pcs per box180x1.6x22.23mm Inox A60T B-12267 8,3004sets = 40pcs per box
230x1.9x22.23mm Inox A60T B-12273 6,6504sets = 40pcs per box
Size (mm) Grit Part No. Max. RPMPackage DetailsPackage Details
• Higher cutting speeds, up to 2-3 times faster.• Reduced wastage of work materials.• No discolouration (rust) around stainless steel cutting edge.
Size (mm) Grit Part No. Max. RPM
100 x 1.0 x 16115 x 1.2 x 22.23125 x 1.2 x 22.23
180 x 2.0 x 22.23230 x 2.0 x 22.23
D-18758
D-18764D-18770
D-18786
WA60TWA60TWA60T
WA36RD-18792
15,28013,29012,200
8,6006,600WA36R
D-series - Depressed center D-18817
• Higher cutting speeds, upto 2-3 times faster.• Reduced wastage of work materials.• No discolouration (rust) around stainless steel cutting edge.
• It will be discontinued once the current stock is over
6,600
Size (mm) Grit Part No. Max. RPM
125 x 1.2 x 22.23
180 x 2.0 x 22.23
12,200
8,600
• D-18823
• D-18839
WA46S
WA36R230 x 2 x 22.23 • D-18845WA36R
20
D-series - Depressed center
A-series - Depressed center
A30S : For Metal C30S : For Masonry, Stone
100 x 3.0 x 16.00
115 x 3.0 x 22.23
125 x 3.0 x 22.23
180 x 3.0 x 22.23
230 x 3.0 x 22.23
100 x 3.0 x 16.00
115 x 3.0 x 22.23
125 x 3.0 x 22.23
D-18552
D-18568
D-18574
D-18580
D-18596
D-18605
D-18611
D-18627
180 x 3.0 x 22.23
230 x 3.0 x 22.23
D-18633
D-18649
15,28013,290
12,200
8,600
6,600
15,280
13,290
12,200
8,600
6,600
C30S
C30S
C30S
C30S
C30S
Size (mm) Part No. Max. RPM Cutting wheel
Cutting wheel• For fast, clean cuts, notching and slotting
A-83587
A-86745
A-83593
A-85254
A-83602
A-85260
A-83618
A-85276
A-83624
A-85282
13,690
13,690
13,290
13,290
12,250
12,250
B-05050 10,1908,500
8,500
6,650
6,650
100 x 3.0 x 16
115 x 3.0 x 22125 x 3.0 x 22
100 x 3.0 x 16
115 x 3.0 x 22125 x 3.0 x 22
150 x 3.0 x 22.23180 x 3.0 x 22.23230 x 3.0 x 22.23
180 x 3.0 x 22.23230 x 3.0 x 22.23
A30T : For Metal C30 : For Stone
Size (mm) Part No. Max. RPMGrit
C30TC30T
C30T
C30T
C30TC30T
A30T
A30TA30T
A30TA30T
A30S
A30S
A30S
A30S
A30S
Grit
A24R: For Metal
Grinding WheelD-series - Depressed Center
Size (mm) Part No. Max. RPM
100 x 6.0 x 16.00
115 x 6.0 x 22.23
125 x 6.0 x 22.23180 x 6.0 x 22.23
230 x 6.0 x 22.23
D-18443
D-18459
D-18465
D-18471
D-18487
15,280
13,290
12,2008,600
6,600
A24R
A24R
A24R
A24R
A24R
Grit
• For metal polishing and general flat grinding
A36P - For metalWA36N / WA36O - For stainless steel
100 x 6.0 x 16
125 x 6.0 x 22.23180 x 6.0 x 22.23230 x 6.0 x 22.23
A-80852A-80868A-80874A-80880
WA36N
WA36NWA36O
A-80896
13,690
115 x 6.0 x 22.23 WA36N 13,29012,2208,5006,600WA36N
Size (mm) Part No. Max. RPMGritGrinding wheel100 x 6.0 x 16115 x 6.0 x 22.23125 x 6.0 x 22.23150 x 6.0 x 22.23180 x 6.0 x 22.23180 x 6.0 x 22.23230 x 6.0 x 22.23
A24R
A36PA36P
A36P
A36PA36PA36P A-80911
A-80927A-80933A-84981
• A-88886A-80949A-80955
13,69013,29012,29010,1908,5008,5006,600
• It will be discontinued once the current stock is over
A-series - Depressed Center
21
A36N-BF - for Aluminium
115 x 6 x 22.23 B-14560A36N-BF 13,300
Size (mm) Part No. Max. RPMGrit
Aluminium Wheel
A36T-BF - for metal
115 x 3 x 22.23 B-21200A36T-BF 13,300
Size (mm) Part No. Max. RPMGrit
Long life Metal Cutting Wheel
Wire Cup Brush(Crimped cup)
• The crimped wire cup brush is a multipurpose brush suitable for wood, paint, rust removal and many other applications.
• The big innovation of the brushes is the Multithread bore M14-5/8 just one product suitable on angle grinders with bore M14 and 5/8.
22
Outer Diameter (mm) Part No.Spindle Thread Suitable for Max. RPM
T-02010
T-02026
120
T-01993
T-02004
M14 -5/8”-11
M14 -5/8”-11
60
100
14,000
90
M14 -5/8”-11
M14 -5/8”-11
115mm, 125mm grinder
115mm, 125mm grinder
180mm, 230mm grinder
180mm grinder
14,000
8,000
8,000
23
Wire Cup Brush(Crimped cup)
• Ideal for flat surfaces, edges, light rust removal.
For Model: M10: 100mm M14: 115mm or higher.• 100mm• 115mm, 125mm, 150mm, 180mm• 180mm, 230mm
Outer Diameter (mm) Part No.Spindle Thread Max. RPM
794160-5
794162-1
794371-2
794324-1
12,500
12,500
D-24066
D-24072
12,500
12,500
D-24088
D-24094
12,500
12,500
11,000
11,000
M10 x 1.25
M10 x 1.5
M14 x 2
M10 x 1.5
M14 x 2
M10 x 1.5
M14 x 2
M16 x 2
•75
•75
•90
•60
•60
•75
•75
•90
794372-0
794325-9
9,000
9,000
M14 x 2
M16 x 2
•110
•110
Wire Brush Twisted(Knot Cup)
For Model: M10: 100mm M14: 115mm or higher.
Outer Diameter (mm) Part No.Spindle Thread Max. RPM
Outer Diameter (mm) Part No.Spindle Thread Max. RPMKnot Cup2
Knot Cup
D-24125
D-24131
M10 x 1.5
M14 x 2
75
75
12,500
12,500
D-24103
D-24119
M10 x 1.5
M14 x 2
60
60
12,500
12,500
D-24147
D-24153
M10 x 1.5
M14 x 2
60
60
12,500
12,500
• Can be used for heavy duty cleaning of large metal surfaces, rust and paint removal, removal of weld scale and corrosion, surface preparation for painting and welding, auto body finish and repair.
Knot Cup2Knot Cup
For Model: 100mm• Best for cleaning sides
Wire bevel Cup794163-9 12,500
12,500
M10 x 1.25
M10 x 1.5
85
85
Outer Diameter (mm) Part No.Spindle Thread Max. RPM
794165-5•
It will be discontinued once the current stock is over•
Flap Disc
EN Standard
Pictograms for safety use
Application
Large pictogram indicates recommended application
Grain type/ Grit size
Max operating speed
Size
Part number
Backing Type
Fiber glass backingStandard backing type
Nylon backingFor heavy duty
Shape Type
Flat Angled
Material chart
Aluminum oxide
Best for metal Best for INOX and metal Best for Masonry
Zirconia alumina Silicon carbide
Recommended Acceptable
Wood
Description of Grit material
Description of label color
Masonry
INOX
No ferrous
Metal
Plastic
24
Flap Disc
Material - Zirconia Aluminum: For sanding and grinding metals and stainless steel. Sands flat, contoured or curved surfaces like a sanding disc.
– D-27523Z 36
Part No.P-Series
Part No.D-SeriesDia (mm)
Dia (mm)
Grit
P-39104
P-39110P-39126P-39132P-39148P-39154P-39160
P-39176
P-39182
P-39198
P-39207
D-27436
D-27442
D-27458D-27464
D-27486D-27492D-27501D-27517
–
––
–
D-27539
D-27545
D-27551
D-27567
Z 40
Z 60Z 80Z 120
Z 40
Z 60Z 80Z 120Z 40Z 60Z 80
Z 120
Z 40
Z 60
Z 80
Z 120
D-27420Z 36
–
–
––
–
–
D-27470Z 36
P-39263
P-39279P-39285
P-39291
–––
–
Z 40
Z 60Z 80
Z 120
BEST OPTIONALFor Applications
•
•
•
•
•
•
•
•
•
•
•
–
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)115 (4-1/2”)
125 (5”)
125 (5”)
125 (5”)125 (5”)
125 (5”)
150 (6”)
150 (6”)
150 (6”)
150 (6”)
180 (7”)
180 (7”)
180 (7”)
180 (7”)
180 (7”)170
170170
170
• It will be discontinued, once current stock is over
D-28117C 120
D-28070
D-28086
D-28092
D-28101
C 36
C 40
C 60
C 80
P-39350
D-28064
C 80
C 120
C 120
C 36
C 40
D-28058
D-28020
D-28036
D-28042C 60
D-28123
D-28139D-28145
D-28151
C 36
C 40C 60
C 80
D-28167C 120
Material-Silicon Carbide: Effective for sanding brick, stone & concrete.
BESTFor Applications
Part NoGrit
•
Material-Aluminum Oxide: For sanding metal, plastic, wood & steel.
BEST OPTIONAL
For Applications
D-27121A 36
D-27034
D-27040
D-27056D-27062
D-27084D-27090
D-27109
D-27115
D-27137
D-27143
D-27159
D-27165
A 40
A 60
A 80A 120
A 40A 60
A 80
A 120
A 40
A 60
A 80
A 120
D-27028A 36
D-27078A 36
Dia (mm) Part NoGrit
180 (7”)
180 (7”)
180 (7”)
180 (7”)
180 (7”)
125 (5”)
125 (5”)
125 (5”)125 (5”)
125 (5”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)
115 (4-1/2”)115 (4-1/2”)
125 (5”)
125 (5”)
125 (5”)
125 (5”)
125 (5”)
170
180 (7”)
180 (7”)
180 (7”)
180 (7”)
180 (7”)
25
Abrasive DiscMost versatile wheel for light metal grinding and sanding
Outer Diameter(mm) Grit Part No.
Pc Per Pkg
Pc Per Pkg
Part No.P-Series
Max. RPM
24
30
50
80
100
120
794065-9
794066-7
794067-5
794068-3
794227-9
794069-1
13,700
13,700
13,700
13,700
13,700
13,700
24
30
50
80
120
794104-5
794105-3
794106-1
794107-9
794108-7
11,950
11,950
11,950
11,950
11,950
24
30
50
80
120
794096-8
794097-6
794098-4
794099-2
794100-3
11,000
11,000
11,000
11,000
11,000
100
100
100
100
100
100
115
115
115
115
115
125
125
125
125
125
24
30
50
80
100
794070-6
794071-4
794072-2
794073-0
794219-8
9,200
9,200
9,200
9,200
9,200
794094-2 P-01068
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7,600
P-01080
16
20
24
30
50
80
100
120
794091-8
794092-6 P-01074
794093-4
794218-0
794095-0
794220-3
794221-1
7,600
7,600
7,600
7,600
7,600
7,600
7,600
150
150
150
150
150
180
180
180
180
180
180
180
180
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10 5
5
5
10
10
10
10
10
10
-
-
-
Rubber Pad for Abrasive DiscFor Abrasive Disc.
• With Lock Nut.• For spindle thread M14 x 2. (DIN)• For spindle thread M16 x 2, 5/8”
Outer Diameter (mm) Part No. Part No.
100mm 76 • A-81125 743009-6
115mm 100 • 794187-5 •743036-3
150mm
125mm 115 743015-1
180mm
125 743016-9
170 743012-7
For Grinder size
Spindle ThreadOuter Diameter(mm) Part No.For Grinder size
M10 x 1.25 30 224501-6
125 / 150 / 180 230mm
M10 x 1.5 30 224502-4
M14 x 2 DIN 48 224515-5
100mm
100mm
Abrasive Disc (Hook & Loop Type)
Sanding Lock Nut
For wood, iron and steel.
For ModelDia.(mm) Grit Part No.
9564CVL
9564CVL
115
115
125125
• It will be discontinued once the current stock is over
•794594-280
240 •794597-6
•794598-440240 •794603-7
9565CVL9565CVL
Pad for Abrasive Disc(Hook & Loop Type)
Dia(mm) Part No.
9564CVL 115 743062-2
125 743061-4
For Model
9565CVL
26
For Abrasive Disk
• Used with Grinders
Wheel Cover
N9500N 154755-0165171-1
125266-2
135109-0Tool Less
--
-
-
-
-
-
• 135238-9 122885-5
9520B
9553HN, 9556HN, 9556HPGA4030, GA4034GA4030, GA40349563C, 9563HZ
For ModelSize Part No.Type
100mm
100mm100mm
100mm
100mm100mm
165362-4
135107-4
125267-0
122894-4
125097-9
125268-8122887-1
135242-8
Tool Less
Tool Less
Tool Less
Tool Less
122886-3135245-2
9521NB, 9564HZ, 9561C, 9564C, 9564CV9521NB, 9564HZ, 9561C, 9564C, 9564CV9521NB, 9564HZ, 9561C, 9564C, 9564CV
9554HN, 9557HN, 9557HP, BGA452Z / RFE
GA4530
GA4530
9564PC
9522NB, 9015B
9555HN, 9558HN, 9558HP, 9565HZ, 9562CR, 9565CV/CVL
GA5030, GA5034, GA5031, GA5011GA5030, GA5034, GA5031, GA5011
115mm
115mm
115mm
115mm115mm115mm
115mm
125mm
125mm
125mm
125mm
134961-3
135192-7
9016B
GA6010 150mm
150mm
180mm
180mm
180mm
230mm
230mm
230mm
164825-7
122889-7
135279-5
9607HB, GA7001
GA7050, GA7050R
GA7020, GA7030, GA7040S
164814-2
122891-0
154672-4
9609HB
GA9050, GA9050R
GA9020, GA9030, GA9040S
-
-
-
-
-
-
-
-
-
-
-
165053-7
192212-0
192475-8
N9500N
9553NB, 9556NB/PB, 9563/C/CV,GA4030
For cup type diamond wheel
GA9020, GA9030/S, GA9040S 194044-1
195250-1
For 100mm GrindersFor 100mm Grinders
193794-5B
B
C
A
A
For 115mm , 125mm Grinders -
For 115mm , 125mm Grinders
For 230mm Grinders
• Used with Grinders for dust collection
A B C
Dust collecting wheel guard
For ModelSize Part No.Type
27
9560/C,9561/C/CV, 9562/C/CV, 9563H/C/CV, 9564H/C/CV, 9564CVL, 9565H/C/CV/CVL, 9566C/CV
GA7010C,GA9010C
GA7020, GA7021,GA9020, GA7030/S, GA7040S,GA9030/S, GA9040S
193903-6
193956-5
194289-1
For Grinders
For Grinders
Part No.Suitable forDust Cover Attachment
A A
B
C
B C
3pcs/set
2pcs /set 2pcs/set
Type
Part No.Suitable for
125mm, 150mm, 180mm Grinders 152492-0
100mm, 115mm, 125mm Grinders 153489-2
180mm, 230mm Grinders 152539-0
GA5010, GA6010
9005B
153504-2
273503-9
151776-3
153504-2
• 194543-3
180mm, 230mm Grinders
180mm, 230mm Grinders (AVT grip)
180mm, 230mm Grinders (AVT grip)
GA5010, GA5011, GA6010, GA6011
• 162264-5
Grip
• AVT Grip
Grip
20100mm Grinders
100mm Grinders
115 / 125mm Grinders
180 / 230mm Grinders
DIN / OLD Type
20
28
782420-7
782401-1
35
28
782407-9
782412-6
782423-1
• Used with Grinders / Concrete Planers, Wall Chaser
Part No.For ModelLock Nut Wrench Size
Super FlangeSpindle Thread Part No.Outer Diameter (mm)
Outer Diameter (mm)
For Grinder size: 180mm, 230mm
47 192227-7
Safety Cutting FlangesFor Cut - Off Wheel, Extra large diameter.
Spindle Thread
N.B. Part No. 224257-1 for same size inner flange.
* Use with Lock nut 224543-0
For Grinder size: 180mm, 230mm
M14 X 2 (DIN)
M14 X 2 (DIN)
78 *224256-3 224257-1
Outer Flange Part No.
Inner Flange Part No.
For Depressed Center Wheel & Diamond WheelUse of the Super Flange makes it easy to remove the Grinding Wheel etc. after grinding operations. The lock nut can be removed with only about one third of the force required to remove a conventional inner flange. The method of installation and use are the same as for the usual inner flange.
28
Diamond WheelsSegmented Type:
Segmented Wave Type:This wheel has slits like the segmented wheel. Each segment has many notches (Wave). These notches ensure:• Fast cutting with less resistance.• Smooth debris removal.• Less loading on wheel.
Corrugated Type:This wheel has notches around the Rim. Has a characteristic between Continuous Rim and Segmented Type. Has faster cutting like Segmented Type. At the same time, can attain cleaner surface like continuous rim without broken edges.
Continuous Rim Type:Has layer of diamond with uniform thickness around the entire rim. Can maintain clean surface even on crusty, brittle materials. Cuts with accuracy but not as fast as segment type wheel.
Most commonly used. Blade has slits and alayer of diamond is sintered on the edges. Cuts faster than continuous rim type and maintainsaverage cutting surface.
The Makita Diamond Wheel Series offers Three types of wheel grades to meet user needs.
Electro Deposited Type:Diamonds are electro deposited and have more exposure than bonded type. Cuts faster and more efficient.
Features in terms of Shape
Material No. 5 Material No. 6
Hard concrete Granite Gneiss SmoothableEngineering
Brick Aggregate Block French Tile Asphalt Tile
Material No. 3
Cemented Tile Marble Unglazed Tile
Material No. 1
Material No. 2
Material No. 4
Sidewalk SlateEngineering BlockEngineering Block
Class 2
Concrete Block U-shaped Groove Sidewalk Block
Carbonaceous Shale
For Material
: Specially suitable, O: Suitable
Premium Range:This yields the highest performancein both cutting speed and durability
Medium Range:This achieves an optimum balancebetween performance and price.
Standard Range:This has the attraction of a reasonableprice tag.
29
125 1.9 7 22.23 20 Blue 125mm125mm100mm
A-01236
125 2 7 22.23 20 Blue 125mm • A-02808
230 2.2 7.5 22.23 - Gold 230mm • A-86826SegmentedSegmentedSegmentedSegmented Wave
Segmented Wave
Segmented WaveSegmented Wave
Segmented
Segmented
SegmentedSegmented
Segmented
SegmentedSegmentedSegmented
SegmentedSegmentedSegmentedSegmented
SegmentedSegmented
Segmented Dry
Dry
Dry
DryDryDry
DryDryDry
Dry
DryDryDry
Dry
DryDryDryDry
DryDry
DryDry
Segmented Wave
Segmented Wave
Segmented WaveCorrugatedCorrugated
Corrugated
Corrugated
CorrugatedCorrugated
CorrugatedCorrugatedCorrugatedCorrugated
CorrugatedCorrugatedCorrugatedCorrugatedCorrugated
Corrugated
CorrugatedCorrugatedCorrugatedCorrugatedCorrugated
Continuous RimContinuous Rim
Dry
DryDryDry
DryDry
Dry
Dry
DryDryDryDry
DryDry
DryDry
DryDryDry
DryDryDryDryDry
WetDry
105 2 7 20 16 Gold 100mm D-05197 Standard
Standard
StandardStandardStandard
Standard
StandardStandard
StandardStandardStandard
Standard
Standard
Standard
Standard
StandardStandard
Standard
Standard
StandardStandardStandardStandard
Standard
StandardStandard
StandardStandardStandard
Standard
StandardStandard
Standard
Premium
Standard
StandardStandard
Standard
Standard
MediumMedium
MediumMedium
Premium
Premium
PremiumPremium
-
125 2 7 22.23 20 Gold 125mm A-88901
180 2 7 25.4 22.23 Gold 180mm A-87909
115 1.9 7 22.23 -
-
-
-
-----
- -
--
-
---
----
--
-
--
- ---
- --
---
--
--
--
-
- - -
---
-
--
--
-
-
-
-
--
-
-------
-- --- -
- --
-- ---- -
-- -
-- ---
-
-
-
-
--
-
-
-
-
-
Gold 115m A-84109125 1.9 7 22.23 20 Gold 125mm A-84115150 2.1 7 22.23 - Gold 150mm B-06432180 2.3 7 25.4 22.23 Gold 180mm A-84121
230 2.5 7 22.23 - Gold 230mm A-84137105 1.7 7 20 16 Silver 100mm A-84090115 1.8 7 22.23 - Silver 115mm A-84006125 2 7 22.23 20 Silver 125mm A-84012180 2 6 25.4 22.23 Silver 180mm A-84028
230 2.2 6.5 22.23 - Silver 230mm A-84408
22.23 - Gold
22.23 - Gold
105 1.8 7.5 20 16 Gold 100mm B-03028
115 2 7.5 22.23 - Blue 115mm A-80422
125 2 7.5 22.23 - Blue 125mm A-80438180 2.2 7 22.23 - Blue 180mm A-83842230 2.5 7.5 22.23 - Blue 230mm A-80173125 2 7.5 125mm • B-02054
230 2.5 7.5 230mm B-02004
D T X H d 1 2 3 4 5 6Color For Model Part No Type
• It will be discontinued once the curtrent stock is over
125 2 7 22.23 20 Blue 125mm • A-02761
125 2 7 22.23 --
Blue 125mm • A-80690180 2 7 22.23 Blue 180mm • A-80709
105 2 7 20 16 Gold 100mm D-05206115 2 7 22.23 - Gold
O O
O O
O O
O O
O O
O O
O O
O
O
O
115mm A-84143
125 2.1 7 22.23 20 Gold 125mm A-84159
180 2.3 7 25.4 22.23 Gold 180mm A-84165
230 2.6 7 22.23 - Gold 230mm A-84171
105 2 7 20 16 Silver 100mm A-84040115 2 7 22.23 - Silver 115mm A-84056125 2.1 7 22.23 20 Silver 125mm A-84062180 2.3 7 25.4 22.23 Silver 180mm A-84078
230 2.6 7 22.23 - Silver 230mm A-84084115 2 7 22.23 - Silver O 115mm B-02967
125 2 7 22.23 20 Silver O 125mm B-02973
230 2.3 7 22.23 -
-
-Silver O 230mm B-01806
• A-88939
• A-88945• A-88951
A-86804
• A-88967
115 2.0 7
77
7
7
22.33 Gold 115mm
125 2.0 22.33 20 Gold 125mm180 2.0 25.4
25.4
22.3 Gold 180mm
22.23 Gold180 2.0 180mm
230 2.3 22.23 Gold 230mm
•••
•
••
-115 1.6 5.0 22.23 Gold 115mm A-89028
A-89012105 1.6 5 20 16 Gold 100mm
125105
2 7.5 22.23 20 Black1.8 7.5 20 16 Gold
• A-02200A-87149
x
D
d
HT
Diamond Wheels
30
Offset Diamond Wheel (Dry) / Diamond Cup Wheel
DApplication T X H d 1 2 3 4 5 6Color For Model Part No.
O OFor coarse grinding work 105 4 8 22.23 - -Silver 115mm, 125mm B-14629O O
X HD Part No.T d ColorMarble, sand stone and limestone115 - - Silver- 22.23 115mm D-25024Marble, sand stone and limestone180 - - Silver- 22.23 180mm D-25030
Electro Deposited Diamond Wheel / Standard Range
Ring
Segemented Type
Segemented Type
For Material For Grinders
• The protruding grit volume allows for easier cutting of marble, sand stone and limestone.• There is no heat generated therefore the cutting of material is quicker and easier.• Have a high grit density which gives a higher accuracy when cutting.
Best in cutting softer materials such as Resin board, Fiberglass, pipe etc
(H)Outer DiaType (D)Hole Dia Part No.Ring 20 22.23mm 20mm
Pakage10pc/set A-85248
d
H
31
x
D
d
HT
x
D
d
HT
• For rough cutting (coarse grinding work)• Fast material removal• Light weight• Long life
ONLINE VERSION V.13
Makita Gulf FZEP.O.Box , Jebel Ali Free Zone, Dubai - UAE.Tel. (971) 4 8860804 Fax. (971) 4 8860805
email:[email protected]