GREGG DISTRIBUTORS LTD. DISTRIBUTORS LTD. NEW PRODUCT SUPPLEMENT CATALOGUE 3 2017 In this issue:...

GREGG DISTRIBUTORS LTD.

NEW PRODUCTSUPPLEMENTCATALOGUE

32017

In this issue:

Thank Youfor shopping at Gregg’s!

Gregg Distributors is proud to be 100% Canadian.

When you buy from Gregg Distributors,

together we are reinvesting in Canada!

ARDENT Office Chairs .................................................................. SP03-09BOB DALE GLOVES Gloves ......................................................... SP03-17BRASS FITTINGS Brass Hose Barb Fittings ................................ SP03-21CAR-FRESHNER® Automobile Air Freshener Products — “Little Trees” ............................................................................. SP03-20CAT® Men’s Industrial Footwear .................................................... SP03-17CRUSHPROOF Tailpipe & Stack Adapters ................................... SP03-18DIXON Valves ................................................................................ SP03-23EATON AEROQUIP Assembly Equipment .................................... SP03-22EATON AEROQUIP Medium Pressure - Hose .............................. SP03-21ESAB® Mild Steel Wires .................................................................SP03-11ESAB® Stainless Steel Rods ..........................................................SP03-11FIRESTONE RED Label™ Air Springs .......................................... SP03-19FPPF® Stabilizer ............................................................................ SP03-13G.D.L.™ Steel Strapping, Tools, & Accessories ............................ SP03-08HELLY HANSEN Clothing & Bags ................................................. SP03-16IGLOO COOLERS Cooler ............................................................. SP03-13KEURIG® K-Cup® Brewing System................................................ SP03-12LINCOLN Coupler ......................................................................... SP03-08LUFKIN® Pocket Tapes .................................................................. SP03-02LUCAS OIL Automotive Chemicals ............................ SP03-14 to SP03-15MARKAL® Paintstiks® .................................................................... SP03-12MASTER LOCK Lockout Devices ................................................. SP03-05MASTER LOCK Locks .................................................................. SP03-05MILLER® Fall Protection ................................................................ SP03-18NORTH Canadian Hard Hats ........................................................ SP03-18NORTH Respirator Fit Testing ....................................................... SP03-18NOVAFLEX® Ducting Hose............................................................ SP03-22O’KEEFFE’S Foot & Hand Cream ................................................. SP03-12OTC® Hand Tools .......................................................................... SP03-02PERFORMANCE TOOL® Air Tools ................................................ SP03-03PHILIPS/SYLVANIA/GE/WAGNER Miniature Bulbs ...................... SP03-20PREMIER HITCH Air Operated Couplings .................................... SP03-19PT COUPLING COMPANY Coupling Adapters ............................. SP03-23“MR. HEATER” Heaters .............................................. SP03-06 to SP03-07RECOCHEM Diesel Exhaust Fluid (DEF) ..................................... SP03-13RUST-OLEUM Primer ................................................................... SP03-12SHIPPING PRODUCTS Packing Tape .......................................... SP03-08SHOWA GLOVES Nitrile Gloves ................................................... SP03-18SIGMA STRETCH FILM Stretch Film ............................................ SP03-09STORAGE CRATES/TOTES ......................................................... SP03-09SYMTECH CORPORATION Headlamp Alignment Systems ........ SP03-06TEMRO Silicone Pad Heaters ....................................................... SP03-19TRYGG Tire Chains ....................................................................... SP03-20WALTER Abrasives ....................................................................... SP03-10WALTER Chemical ........................................................................ SP03-13WALTER Power Tools ................................................................... SP03-02WALTER Tooling ............................................................................ SP03-04

SP03-2 GREGG DISTRIBUTORS LTD.

OTC®

Hand Tools

OTC/3027NEW

Hole PuncH kit •Easy, smooth operation •Will pierce up to 14 gauge steel •Includes punches and dies in sizes: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4” and 9/32”Part No. 4383.

AAA/3015

eXecutiVe® DiAMeteR Pocket tAPeS•Designed for measuring diameters of pipe, cable, tire, etc. •Polished chrome case •Zero falls in the same place on each side of the blade •Conversion from diameter to circumference, simply turn the blade •Easy-to-read bold graduations on yellow background •Spring action returns blade to case

NEWLUFKIN®

Pocket Tapes

Part No. Blade Width

Blade Length

Blade Style Blade Shows

W606P 1/4” 6 ft. A18 Diameter inches to 1/64thsW606PD 1/4” 6 ft. A19 Diameter inches to 1/100thsW606PM 6 mm 2 m A20 Diameter inches to millimeters

NEWWALTERPower Tools

WAL/3676

ulti-MAte™ FiniSHinG GRinDeR kit•Variable speed fillet weld grinder and finishing tool •Designed to work in tight corners that other tools have difficult time reaching •You can go from a rough weld to a mirror finish in just minutes •Kit includes: (2) Blendex U™ Turbo, (1) Blendex U™ Wheels, (1) FX™ Stainless, (1) Enduro-flex 2-in-1 Turbo, (1) Enduro-Flex 2-in-1™ Part No. 30A287.

RAil-MAte™ FiniSHinG kit •Removes welds and finish pipes, tubes and railings faster •Features: •Soft-Start technology to avoid kickback when starting the tool •Dialspeed™ variable speed control •Dynamax™ RPM Monitoring to maintain consistent speed under load •Kit includes: (2 each of) Coolcut XX Rail-Mate™ 60 grit, 80 grit, 120 grit belts, (1 each of) Blendex belts fine, medium and coarse Part No. 30A289.

icecut MAGnetic DRillinG unitThe ultimate core cutting system.Features: •Centered Control Panel - Centered positioning of the electronics for easy control from any position. Whether it’s a personal preference, or if the operation requires drilling from a specific side, the central control panel allows for efficient and easy operating. •Mandrel Support - Absorbs vibrations for added stability and perfect centering. This ball bearing support ensures the motor and chuck are perfectly aligned. It also provides smooth and precise cutting operations, and reduces chipping or breakage of the cutter. •Full Body Integrated Wiring - For convenience and greatest durability. No electrical wires will get in the way while drilling or moving your unit. Moreover, this prevents common failures due to mishandling (like carrying the unit by the wire, or the wire catching on an object). •Steel Sliding Guard - Easily accessible, and extra safe. Slide guard upwards, position unit, slide guard down and start drilling safely and without having chips and lubricant all over! •Direct Access - Direct access to carbon brushes makes maintenance simple. The powerful motor will always operate at maximum efficiency, and when it comes time to change its carbon brushes, their location and the smart design make maintenance very convenient! •Ergonomic Handle - Ergonomic handle with smooth grip - sturdy and lightweight - makes moving easy. Its design further reduces overall weight, and the smooth grip guarantees easy carrying and positioning of the unit. •Quick Release Reversible Handle - allows for positioning in confined or restricted spaces, or simply for convenience. •Material and Thickness Detector - Unit will not start when the magnetic holding power is insufficient to secure the unit to the workpiece and operate safely •120V A.C.Includes: Drilling unit, carrying case, lubrication system, 1/2” keyed chuck, chuck adapter, M6 T-handle hexagonal key, Allen key, safety strap, safety glasses, reversible press button, and triple handle.

Part No. RPM no-load Watts Amps

Capacities Max. drilling depth

Max. drill point pressure

WeightTwist drill Annular cutter

39-D100 600 850 8.0 1/2” Stub Max 1-3/8” 1-1/2” 1,875 lbs. 22 lbs.39-D200 300/600 1200 10.0 1/2” Jobbers Max 2” 2” 1,875 lbs. 27 lbs.39-D300 180/500 1800 18.0 1-1/4” 3” 3” 4,160 lbs. 52 lbs.39-D400 129/700 2000 20.0 1-1/4” 4” 4” 4,950 lbs. 54.5 lbs.

NEW

Blade Style A18

Blade Style A19

Blade Style A20

39-D300

Disc dia. RPM Spindle

Thread Motor Watts6” 2,500 -8,750 5/8”-11 120V A.C. only 1550

RPM Spindle Thread Motor Watts

1,600 -3,200 5/8”-11 120V A.C. only 1200

SP03-3www.greggdistributors.ca

NEW PERFORMANCE TOOL®

Air Tools

WIL/4025

SpecificationsPad Diameter 5”Free Speed 10,000 RPMAverage CFM 6

Specifications

Torque 50-200 ft-lbs. working230 ft-lbs. max

Free Speed 7,800 RPMAverage CFM 7

tiRe inFlAtoR WitH DiAl GAuGe•10 to 170 PSI gauge with rubber ring •Push button air release valve •14” hose with clip on chuck •1/4” male NPT air inlet Part No. M521.

5” RAnDoM oRBitAl SAnDeR•Rotary and orbital action produces swirl-free finishes •Hardened steel cylinders extend the life of the tool •Built-in air regulator for precise speed control •Specially balanced design for less vibration •Compact design allows maximum control •Hook and loop backing pad •Use for sanding, feather edging, scuffing, finishing and blending metals, plastics, fiberglass and body filler Part No. M548.Part No. M689. Replacement pad.

PoRtABle ABRASiVe BlASteR kit•Remove rust, paint, graffiti, corrosion and scale •Heavy-duty 50 lb. capacity hopper, aluminum blast gun and 15’ material hose •Compatible with any abrasive: silica, sand, glass beads, and pecan shells •Operating pressure: 90 PSI •Minimum air requirement 3.5 CFM at 50 PSI Part No. M549.

1/2” DRiVe coMPoSite iMPAct WRencH•Powerful twin hammer clutch delivers over 1,000 beats per minute •Comfortable composite housing is compact and lightweight •Variable speed with two forward speeds, one reverse •Balanced design for low vibration Part No. M624.

Specifications

Torque 200-1,200 ft-lbs. working1,623 ft-lbs. max

Free Speed 3,900 RPMAverage CFM 12

1” DRiVe HD iMPAct WRencH WitH 6” AnVil•Pin-less hammer clutch produces up to 1,623 ft-lbs. of torque •Teasing Throttle allows controlled start-up and run-down •Removable side handle provides excellent control •6” extended anvil works in hard to reach areas •Built-in air regulator for precise speed control •Pin lock hole for oversized sockets •Ring socket retainer allows for rapid socket changes •Heavy duty blow molded case for carrying and storage Part No. M634.

1.2 MM GeneRAl PuRPoSe SPRAY Gun•All-purpose spray gun with an external air cap for heavy materials such as primers, fillers, sealers and protective coats •1.2 mm needle and nozzle set with aluminum 800 cc bleeder type siphon feed cup •Fully adjustable spray pattern of 6.5” •Average air consumption: 2 CFM at 40 PSI •Fluid regulator adjusts the volume of paint sprayed Part No. M701.

32 oZ. non-AeRoSol RecHARGeABle liQuiD SPRAYeR•80-150 PSI operating pressure •Eco friendly uses no aerosol propellants •Reusable and refillable •Pressurize with your air compressor and your ready to spray •Not for use with flammable liquids, or paint Part No. M715.


NEWWALTERTooling

WAL/3677

cARBiDe coRe cut AnnulAR cutteRS, uniVeRSAl SHAnk•Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys or composite materials •Allow for higher speed and feed rates while requiring less effort to cut through some of the industry’s toughest metals •Aggressiveness and efficiency during the lifetime •Ideal for drilling hard or uneven materials •Extra hard carbide inserts

icecut™ AnnulAR coRe cutteRS uniVeRSAl SHAnk •Annular cutters are coated with an exclusive mixture of chromium and aluminum (AICrN) and are designed to be used where lubricants are not permitted or problematic to apply •Outperforms any Titanium or Titanium-Aluminum coating cutters •Can withstand at least 200°C higher temperatures and produce less heat than a conventional TiAIN cutter •More resistant to higher stress under load and instant impact •Fully ground extra large flutes •Modern tooth design and cutter geometry

SSt™ coRe cut, uniVeRSAl SHAnk •Super Speed Tip (SST) Core Cutters are made with state-of-the-art surface treatment technology that removes porosity during the fabrication process •Creates a perfectly smooth finish which allows for a better evacuation of material while drilling •Improves product life and reduces drilling time as it decreases friction with the work surface, which in turn reduces the amount of heat generated •Fully ground extra large flutes •Modern tooth design and cutter geometry •Special bronze SST surface treatment

Multi-SteP™ DRill BitS •2 wide flutes eliminate chip build-up and chatter •Last many times longer •Point is self-centering •Special titanium coating increases wear resistance

SSt+ StuB lenGtH DRill Bit Set •SST Quick Shank high performance jobbers •Drill bit sizes marked on inside panel •Sturdy metal index container •1/16” to 1/2” by 64thsPart No. 01-E239.

VP™ counteRSinkS WelDon SHAnk •Made of M2 HSS •82° point angle is ideal for countersinking and they can also be used for deburring and chamfering •Special surface treatment •Special tip geometry •Variable pitch design

1/4” SHAnk cARBiDe BuRRS•High performance •Made from highest grade tungsten carbide •Manufactured with highest degree of accuracy for perfect concentricity and balance •Fast material removal and longest life

DouBle cut

AluMinuM & SoFt MetAlS

Part No. Diameter Overall Length

Shank Diameter

01-U400 1-1/2” 1-3/4” 3/4”01-U408 2” 2” 3/4”01-U500 3” 2-1/4” 3/4”

Part No. Type Dia. Length Shank Dia.

Cylindrical (SB)01-V056 SB-1 1/4” 5/8” 1/4”01-V057 SB-3 3/8” 3/4” 1/4”01-V059 SB-5 1/2” 1” 1/4”Cylindrical (SA)01-V055 SA-6 5/8” 1” 1/4”Cylindrical Round Nose (SC)01-V062 SC-6 5/8” 1” 1/4”Tree (SF)01-V066 SF-6 5/8” 1” 1/4”Cone 90° (SK)01-V067 SK-3 3/8” 1/5” 1/4”01-V068 SK-5 1/2” 1/4” 1/4”Inverted Cone (SN)01-V070 SN-1 1/4” 1/2” 1/4”01-V071 SN-2 1/4” 3/4” 1/4”01-V072 SN-4 1/4” 1” 1/4”

Part No. Type Dia. Length Shank Dia.

Cylindrical (SB)01-V058 SB-3 3/8” 3/4” 1/4”Cylindrical (SA)01-V054 SA-5 1/2” 1” 1/4”Cylindrical Round Nose (SC)01-V060 SC-1 1/4” 5/8” 1/4”01-V061 SC-3 3/8” 3/4” 1/4”Ball (SD)01-V063 SD-5 1/2” 1/2” 1/4”Tree (SF)01-V065 SF-3 3/8” 3/4” 1/4”Cone (SL)01-V069 SL-4 1-1/2” 1-1/8” 1/4”Egg (SE)01-V064 SE-5 1/2” 7/8” 1/4”

Part No. Description Shank Size (with 3 flats)

Spiral Fluting01-W029 10 steps from 1/4” to 1” 3/8”

Part No. Dia. Length05-E007 7/16”

1”

05-E008 1/2”05-E009 9/16”05-E010 5/8”05-E011 11/16”05-E012 3/4”05-E013 13/16”05-E014 7/8”05-E015 15/16”05-E100 1”05-E101 1-1/16”05-E102 1-1/8”05-E103 1-3/16”05-E104 1-1/4”05-E105 1-5/16”05-E106 1-3/8”05-E107 1-7/16”05-E108 1-1/2”

Part No. Dia. Length05-H008 1/2”

1”

05-H009 9/16”05-H010 5/8”05-H011 11/16”05-H012 3/4”05-H013 13/16”05-H014 7/8”05-H015 15/16”05-H100 1”05-H101 1-1/16”05-H102 1-1/8”05-H103 1-3/16”05-H104 1-1/4”05-H105 1-5/16”05-H106 1-3/8”05-H107 1-7/16”05-H108 1-1/2”

Part No. Dia. Length05-F007 7/16”

1”

05-F008 1/2”05-F009 9/16”05-F010 5/8”05-F011 11/16”05-F012 3/4”05-F013 13/16”05-F014 7/8”05-F015 15/16”05-F100 1”05-F101 1-1/16”05-F102 1-1/8”05-F103 1-3/16”05-F104 1-1/4”05-F105 1-5/16”05-F106 1-3/8”05-F107 1-7/16”05-F108 1-1/2”

Part No. Dia. Length05-E307 7/16”

2”

05-E308 1/2”05-E309 9/16”05-E310 5/8”05-E311 11/16”05-E312 3/4”05-E313 13/1605-E314 7/8”05-E315 15/16”05-E400 1”05-E401 1-1/16”05-E402 1-1/8”05-E403 1-3/16”05-E404 1-1/4”05-E405 1-5/16”05-E406 1-3/8”05-E407 1-7/16”05-E408 1-1/2”05-E409 1-9/16

Part No. Dia. Length05-F307 7/16”

2”

05-F308 1/2”05-F309 9/16”05-F310 5/8”05-F311 11/16”05-F312 3/4”05-F313 13/16”05-F314 7/8”05-F315 15/16”05-F400 1”05-F401 1-1/16”05-F402 1-1/8”05-F403 1-3/16”05-F404 1-1/4”05-F405 1-5/16”05-F406 1-3/8”05-F407 1-7/16”05-F408 1-1/2”

Part No. Dia. Length05-H308 1/2”

2”

05-H309 9/16”05-H310 5/8”05-H311 11/16”05-H312 3/4”05-H313 13/16”05-H314 7/8”05-H315 15/16”05-H400 1”05-H401 1-1/16”05-H402 1-1/8”05-H403 1-3/16”05-H404 1-1/4”05-H405 1-5/16”05-H406 1-3/8”05-H407 1-7/16”05-H408 1-1/2”

SB


NEW MASTER LOCKLocks

MAS/2755

2-7/8” WiDe coMBinAtion liGHt uP DiAl lock BoXeS•Provides secure storage of keys or access cards •Large easy-to-read light-up, set-your-own combination dials for better visibility, especially in low light conditions •Dials light up automatically each time the weather cover is opened •Durable metal construction •Large open lever for more comfortable use •Weather cover prevents freezing and jamming •Easy to replace battery with CR2032

1-3/4” WiDe coMMeRciAl MAGnuM lAMinAteD Steel PADlockS•Features a 1-3/4” wide laminated steel body encased in a stainless steel body cover for maximum strength and weatherability •Shackle is made of chrome-plated boron carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing •The 4-pin cylinder prevents picking and the dual locking ball bearing provide maximum resistance against prying and hammering

2” WiDe coMMeRciAl MAGnuM lAMinAteD Steel PADlockS•Features a 2” wide laminated steel body encased in a stainless steel body cover for maximum strength and weatherability •Shackle is made of chrome-plated boron carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing •The 4-pin cylinder prevents picking and the dual locking ball bearing provide maximum resistance against prying and hammering

Part No. Description

5424D

Portable lock box, vinyl coated shackle and molded bumper prevents scratches to your door

5425D Wall mount lock box

Part No. Description Vertical Shackle Clearance “B”

Shackle Dimensions: A: 3/8”, C: 15/16”M5STS Keyed Different 1”M5LFSTS Keyed Different 1-1/2”M5LJSTS Keyed Different 2-1/2”M5KASTS-A Keyed Alike – Series A

1”

M5KASTS-B Keyed Alike – Series BM5KASTS-C Keyed Alike – Series CM5KASTS-D Keyed Alike – Series DM5KASTS-E Keyed Alike – Series EM5KASTS-F Keyed Alike – Series FM5KASTS-G Keyed Alike – Series GM5KASTS-H Keyed Alike – Series HM5KALFSTS-A Keyed Alike – Series A 1-1/2”M5KALFSTS-B Keyed Alike – Series BM5KALJSTS-A Keyed Alike – Series A 2-1/2”M5KALJSTS-B Keyed Alike – Series B

5424D 5425D

Part No. Description Vertical Shackle Clearance “B”

Shackle Dimensions: A: 5/16”, C: 13/16”M1STS Keyed Different 1”M1LFSTS Keyed Different 1-1/2”M1LJSTS Keyed Different 2-1/2”M1KASTS-A Keyed Alike – Series A

1”

M1KASTS-B Keyed Alike – Series BM1KASTS-C Keyed Alike – Series CM1KASTS-D Keyed Alike – Series DM1KASTS-E Keyed Alike – Series EM1KASTS-F Keyed Alike – Series FM1KASTS-G Keyed Alike – Series GM1KASTS-H Keyed Alike – Series HM1KASTS-I Keyed Alike – Series IM1KASTS-J Keyed Alike – Series JM1KASTS-K Keyed Alike – Series KM1KASTS-L Keyed Alike – Series LM1KASTS-M Keyed Alike – Series MM1KASTS-N Keyed Alike – Series NM1KASTS-O Keyed Alike – Series OM1KASTS-P Keyed Alike – Series PM1KASTS-Q Keyed Alike – Series QM1KASTS-R Keyed Alike – Series RM1KASTS-S Keyed Alike – Series SM1KASTS-T Keyed Alike – Series TM1KALFSTS-A Keyed Alike – Series A 1-1/2”M1KALFSTS-B Keyed Alike – Series BM1KALJSTS-A Keyed Alike – Series A

2-1/2”M1KALJSTS-B Keyed Alike – Series BM1KALJSTS-S Keyed Alike – Series S

Lockout DevicesBlinD FlAnGe lockout DeVice•Device fully conceals flange bolts, preventing access to the blind until all work has been completed •Adjustable device provides a tight fit, adapting to multiple flanged pipe applications •Four lockout holes allow for multiple workers to lockout device at one time •Durable aluminum and hardened steel construction withstands conditions indoors and out.

PoRtABle GRouP lock BoX•430-grade stainless steel construction maximizes corrosion resistance •Clear, impact-resistant window provides visibility to secured keys •Side window to view unused locks •18 numbered lockout holes for easy identification •Latch with lock hole on front for operations lock •Flanged design on sides offers easy applications of locks •Gasketed key slot to drop keys into removable cup •Drain holes on bottom to limit liquids from accumulating inside •Stackable design facilitates storage and simplifies transporting multiple boxes

Part No. Size Recommended For Use With Nut Diameter

S3922 Small 3/4” to 1-1/8”S3923 Medium 1-5/16” to 1-7/8”S3924 Large 2” to 2-3/4”

Part No. DescriptionS601 Small, features a side window, offering

visibility to unused locksS602 Large, includes a rewritable tag for specific

procedure or machine information

S3922 S3923 S3924

A: 3/8” B: 1-11/16”C: 1-13/32”Width: 2-7/8”

Height: 4-3/16”Width: 2-7/8”


NEW

cAMeRA BASeD HeADlAMP AliGnMent SYSteM •Aligns all lamp patterns: SAE, VOR, VOL, Euro •Aligns all lamp types: Halogen, Xenon, HID, LED •LCD colour touch screen •Multi-language: English, French and Spanish •Line laser vehicle alignment •Laser centering on headlamp •Laser floor slope measurement •Multi-bay usage and floor slope recording •Rechargeable battery operated •RS232, Ethernet, WI-FI, Bluetooth capable •Optional printer available

Part No. DescriptionDVA-6 Electronic Headlamp AimerDVA-6P Electronic Headlamp Aimer

with Printer

MH9BX MH11EB MH18BHeat settings 4,000/9,000 Btu/hr. 6,000/11,000 Btu/hr. 4,000/9,000/18,000 Btu/hr.Heat up to: 225 Sq. Ft. 275 Sq. Ft. 450 Sq. Ft.Run time on (1) 20 lb. tank 108 Hrs. low / 48 Hrs. high 72 Hrs. low / 39 Hrs. high 108 Hrs. low / 48 Hrs. med / 24 Hrs. highFan included No Yes YesOptional AccessoriesF273704 10 ft. Buddy hose and filter

MH35CLP MH60CLPHeat settings 35,000 Btu/hr. 30-60,000 Btu/hr.Heat up to: 875 Sq. Ft. 1500 Sq. Ft.Run time on (1) 20 lb. tank 12 Hrs. low 14 Hrs. lowOptional AccessoriesF227964 Replacement Battery

SYMTECH CORPORATIONHeadlamp Alignment Systems

SYM/3708

NEWMR. HEATER HEATERSHeaters

EEE/1690/1750

PRoPAne tAnk toP HeAteR •Unique rotating burner features both directional and multi-directional heat •Burner head pivots to direct heat •540 degrees of heat •3 heat settings: 30,000, 36,000 and 45,000 BTU’s •No electricity needed •Instant, efficient outdoor heat •Quiet, easy to use •Accidental tip-over •Safety shut-off •Outdoor use onlyPart No. MH540T.

eBuDDY PRoPAne HeAteR •2 heat settings (6,000 and 11,000 BTU/hr.) •Swivel regulator and single control •Thermal-electric generator •Charge portable electronic devices (phone, tablet, GPS and camera) •Integrated On/Off LED thermal-electric lighting in fold down handle •450mA, 2W power output USB plug-in •Low oxygen safety shut-off system (ODS) and tip-over safety shut-off •Heats up to 275 sq. ft. •Runs off a 1 lb. cylinder, connects to a 20 lb. tank with optional hose and filter •Runs approximately 3.5 hours on 1 lb. cylinder on low settingPart No. MH11EB.

PoRtABle BuDDY PRoPAne HeAteR •2 heat settings (4,000 and 9,000 BTU/hr.) •Swivel regular and single control •Fold down handle •Low oxygen safety shut-off system (ODS) •Tip-over safety shut-off •Heats up to 225 sq. ft. •Runs off a 1 lb. cylinder, connects to a 20 lb. tank with optional hose and filterPart No. MH9BX.

BiG BuDDY PRoPAne HeAteR •3 heat settings (4,000, 9,000 and 18,000 BTU/hr.) •Swivel regular and single control •Low oxygen safety shut-off system (ODS) •Tip-over safety shut-off •Heats up to 450 sq. ft. •Connects to two 1 lb. cylinders or to a 20 lb. tank with optional hose •Runs approximately 11 hours on two 1 lb. cylinders on low setting or 216 hours with two 20 lb. propane tanks •Fan – not required for use (operates on 4 D batteries or A/C adapter – both sold separately)Part No. MH18B.

PoRtABle FoRceD AiR electRic HeAteR •1.5 Kw •5,118 BTU/hr. •Heats up to 136 sq. ft. •Thermostatically controlled quiet operation •Adjustable heat angle with fan only option •6’ cord and plug included •120V, 15 ampPart No. MH165FAET.

HeRo coRDleSS FoRceD AiR PRoPAne HeAteR •Forced air propane for either indoor (with adequate ventilation)or outdoor use •Patented cordless technology •Operates while charging – recharges 1 battery in 3 hours •One-touch gas valve with Piezo igniter •Push button electronic control •QBT – 50% quieter than a standard propane heater •Compact design •Ergonomic carry handle •10 ft. hose with regulator included Part No. MH35CLP, Includes 1 internal battery, Runs up to 8 hrs. on internal rechargeable battery.Part No. MH60CLP, Includes 1 internal battery, runs up to 4 hrs. on single rechargeable battery, second battery can be added to extend runtime additional 4 hours (8 hours total)


BiG MAXX unit/utilitY HeAteRS Consumers across the country are turning their garages and barns into heated work spaces that can be used comfortably 12 months per year. Unit heaters use a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115 volt AC power and can be vented vertically or horizontally. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. •Unit heaters are 82% efficient•Ships as Natural Gas, includes NG to LP conversion kit •Aluminized steel tubular heat exchanger for maximum efficiency and longer life •Low Profile Design - Can be installed in low-ceiling buildings•Minimum 8 ft clearance from floor to base of heater required•1/2 inch gas connection•Spark ignition features self-diagnostic control module•Heater can be controlled with any standard 24V thermostat (sold separately) •Includes angle brackets (2) for ceiling mount •Designed for left or right venting (sold separately) •Category 1 vertical; category 3 horizontal venting

RADiAnt WoRkSHoP HeAteRS •Heats up to 625 sq. ft. (2-1/2 car garage) •For use in low profile buildings with 7-12 ft. ceilings or higher •No electricity required – heats during power outages •Includes thermostat and mounting brackets

Part No. DescriptionMH25LP 22,000 BTU/hr. (Propane)MH25NG 25,000 BTU/hr. (Natural Gas)AccessoriesF200293 Fuel conversion kit – NG to LPF200294 Fuel conversion kit – LP to NG

Part No. Description BTU/hr. Heats Up ToMHU50 3” flue size for vertical vent

– 4” flue for horizontal 50,000 1,250 sq. ft.MHU80 4” flue size 80,000 2,000 sq. ft.MHU125NG 4” flue size 125,000 3,125 sq. ft.

unit/utilitY HeAteR AcceSSoRieS

RADiAnt keRoSene HeAteR •70,000 BTU/hr. •Heats approximately 1,750 sq. ft. •Runs up to 5 hours on full tank •2.75 gallon fuel tank •Featuring Quiet Burner Technology •Thermostatically controlled •LED readout for set temperature and room temperature •Fuel level indicator •Replaceable external fuel filter •Includes onboard digital thermostatPart No. MH70KFR.

Part No. Description IncludesIndirect Fired Unit Heater Vent Kits

F102848 Vent Kit – Vertical, 4”(1) 3” to 4” adapter, (1) 4” x 36” B-vent pipe, (2) 4” x 24” vent pipe, (1) 4” 90° elbow, wall fire stop, roof flashing, storm collar, vent cap

F102860 Vent Kit – Horizontal, 4”(1) 3” x 4” adapter – used on 50K only, (1) 4” adapter, (1) 45° elbow, (1) 4” x 12” length, (1) 4” adjustable length (6”-19”), (1) wall thimble, (1) 4” screened termination tee, (1) hi-temp 2.8 oz. silicone, (1) SS screw kit

AccessoriesF210359 Thermostat: low voltage reed switch, UL listed

F271239 Universal hook up kit

22” stainless steel flex gas connector, brass shut-off valve (1/2” female pipe thread x 1/2” male flare), 1/2” male flare x 1/2” male pipe, 1/2” male flare x 3/8” male pipe, 1/2” male flare x 3/8” female pipe, special gas seal tape for connections

NEW MR. HEATER HEATERSHeaters & Accessories

EEE/1690/1750

Part No. DescriptionF261210 In-line thermostatF273719 Propane high pressure regulator with P.O.L.F273759 90° propane low pressure regulator with P.O.L.F273763 Propane vertical two stage regulatorF273766 Propane auto-changeover two stage regulatorF273767 Propane low pressure LP regulatorF273768 Propane grill regulator with Acme nutF273769 Propane portable table top regulatorF273863 Propane horizontal two stage regulator with P.O.L.F273868 Propane horizontal two stage regulatorF276127 6V/800mA power adapterF276136 Propane low pressure regulatorF276171 Propane “steak saver” adapterF276342 Propane gas gauge

HeAteR AcceSSoRieS

F273719 F273759 F273763F273766

F273863

F273769

F273768

F273767

F273868 F276127

F276136 F276171 F276342

MHU125NG

MHU50

F261210

F102848

F102860

F210359

F210359


G.D.L.™Steel Strapping, Tools, & Accessories

GDL/3467NEW

GD-971

GD-975

GD-979

Part No. Fits Strap WidthGD-971 3/8” to 3/4” strapGD-972 1-1/4” strap

Part No. Fits Strap WidthGD-979 3/8” to 3/4” strapGD-980 1-1/4” strap

Part No. Fits Strap WidthGD-975 1/2” strapGD-976 5/8” strapGD-977 3/4” strapGD-978 1-1/4” strap

Part No. Fits Strap Width Box Quantity

GD-981 1/2” strap 2,000GD-982 5/8” strap 2,000GD-983 3/4” strap 2,000GD-984 1-1/4” strap 1,000

Part No. Strap Width Thickness

Strength (Working

Load)Length/Weight

of RollMill WoundGD-987 1/2” 0.020” 1,220 lbs. 2,850 ft. roll/40 kgGD-988 5/8” 0.020” 1,500 lbs. 2,295 ft. roll/43 kgGD-989 3/4” 0.020” 1,810 lbs. 1,905 ft. roll/45 kgRibbon WoundGD-990 1-1/4” 0.031” 5,500 lbs. 820 ft. roll/48 kg

Highlighted items are new.

NEW

PReMiuM colouReD iDentiFicAtion BoPP BoX SeAlinG tAPe •Backing: Biaxially oriented polypropylene •Adhesive: synthetic rubber •Application temperature: above 13°C (55°F) •Benefits: Strength, instant adhesion, easily applied, portable, resistant to oxidation and controlled unwind •Application: Colour coding, inventory, product identification and single strip closure of RSC cartons •2” x 110 yards

Part No. ColourBST-2-BLK BlackBST-2-BLU BlueBST-2-GRN GreenBST-2-ORG OrangeBST-2-RED RedBST-2-TAN TanBST-2-WHT WhiteBST-2-YLW Yellow

SHIPPING PRODUCTSPacking Tape

FFF/2679

NEWLINCOLNCoupler

PoWeRlock couPleR Developed to optimize lubricant delivery, this coupler is suitable for agriculture, construction and general industry, as well as vehicle service applications. The easy-to-use PowerLock coupler is lever activated for quick attachment and release. Its reverse-jaw design holds the fitting securely to the seat for less grease bypass and lower lubricant costs while enabling single-handed operation. The coupler’s durable, all-steel construction provides long service life.Features: •Lever activated for quick attachment and release from fitting •Comfortable, ergonomic design with protective grip •Easy-to-use •Optimizes lubricant delivery •Secure attachment enables single-handed use of grease gun •Less grease bypass •Lowers lubricant cost Part No. 5900.

LIN/2640

Steel StRAPPinGSold by the roll (16” core x 3” face)•Mill Wound Strapping has a larger coil than ribbon wound. The strapping is oscillated uniformly and tightly across the width of the core•Ribbon Wound Strapping has each layer wound directly over the one below so that the width of the strapping is the width of the coil.

FeeDWHeel tenSioneRS•For general use on flat surfaces, feedwheel tensioners feature fast and easy operation with unlimited take-up, the strapping is pulled through the tool until the desired tension is obtained

Steel StRAP cutteRS•For general use on flat surfaces, feedwheel tensioners feature fast and easy operation with unlimited take-up, the strapping is pulled through the tool until the desired tension is obtained

oPen Steel StRAP SeAlS•Fast and easy to use, open seals can be placed over the strap before or after tensioning •Sold by the box

StAnDARD DutY SeAleRS•Double notch creates a strong interlocking joint •They are usually used with feedwheel type tensioners •For use with open seals


STORAGE CRATES/TOTES

24 Qt. StoRAGe tote•Made of high-density polyethylene •Designed for increased strength and durability •Stackable with all other crates of the same size •Outside dimensions: 19” L x 13” W x 10-15/16” H

16 Qt. StoRAGe cRAte•Made of high-density polyethylene •Designed for increased strength and durability •Stackable with all other crates of the same size •Outside dimensions: 13” L x 13” W x 10-11/16” H

FFF/3145

Part No. ColourBKSC BlackBLSC Sky BlueBRSC BrownGRSC GreenGYSC GreyORSC OrangeRESC RedYESC Yellow

Part No. ColourLG-BKST BlackLG-BLST Sky BlueLG-BRST BrownLG-GRST GreenLG-GYST GreyLG-ORST OrangeLG-REST RedLG-YEST Yellow

leGAcY SeRieS eRGonoMic loW BAck tASk cHAiRS•Model 8610 (Armless) •Model 8612 (With height adjustable T-arms 7.5” - 11” from seat surface)•Back Height Adjust - 16”-17.5” from seat surface•Back cushion made from CFC free moulded polyurethane foam on a 7-ply hardwood back frame with compound curve for lumbar support and comfort•Adjustable Back Tilt Angle 9° back, 3° forward•Seat of high density CFC free moulded polyurethane foam on a 8-ply hardwood seat frame, with a compound radius and waterfall front - 18” wide x 18” deep x 2.5” thick•Adjustable Seat Tilt Angle 4° back, 5° forward•Base is 5 prong, 24” diameter, reinforced nylon construction•All metal connectors to create a solid connection•Carpet, tile and braking casters•Overall width 19” Armless 24” w/ Arm•Pneumatic Height Adjust - 17”-22”

FFF/1286

Without ArmsPart No.

With ArmsPart No. Colour

8610-C-108 8612-C-108 Burgundy8610-C-308 8612-C-308 Navy8610-C-908 8612-C-908 Charcoal8610-C-9009 8612-C-9009 Black

NEW ARDENTOffice Chairs

FFF/3509

clASSic BloWn StRetcH FilM General purpose, hand applied stretch film. The stretch and toughness of blown film ensures enhanced protection for regular loads and extra protection for hard-to-hold loads..

Steel StRetcH FilM Wrap with significantly less effort than conventional films, while sustaining containment. Uses 25-50% less effort to stretch compared to competitor films. Containment meets or exceeds that of other conventional hand films.

Part No. Width Length GaugeBHF18120 18” 1,000 ft. 120 ga.BHF1880 18” 1,500 ft. 80 ga.

Part No. Width Length GaugePW70-16 16” 1,476 ft. 70 ga.PW80-16 16” 1,394 ft. 80 ga.PW90-16 16” 1,312 ft. 90 ga.

NEW SIGMA STRETCH FILMStretch Film

NEW


NEWWALTERAbrasives

WAL/3673

cRiMPeD WiRe WHeel BRuSHeS FoR AnGle GRinDeRS•Made from top quality wire that is perfectly knotted and balanced for minimal vibration and maximum user safety •Quicker surface cleaning and safer operation

lineAR cRiMPeD BRuSH tuRBo Quick-cHAnGe BAckinG PADS •Special saucer shaped backing pad with ribbed backing, ensures a continuous stream of air between pad and disc for cool operation and long disc life

MounteD BRuSH WitH cRiMPeD WiReS •For precision cleaning and deburring on die grinders •Long life •Perfectly balanced •Top quality wire

RAilcut ii •Designed for fast cutting on all types of rails without glazing •Heavily reinforced for maximum safety, smooth cutting and more cuts per wheel than ever before

Part No. Diameter Thickness Arbor Grade Max RPM11-V145 14” 5/32” 1” A-24 5,40011-V165 16” 5/32” 1” A-24 4,700

NEW

ZiP™ZIP wheels are made of highly refined ingredients which will not contaminate stainless steel and ensure top performance cutting. For notching applications, it is recommended that you use ≥1/8”, for grinding applications, ≥1/2” is recommended. •Fast, cool and free cutting allowing the operator to work with minimal pressure for best control

Highlighted Items are

Part No. Diameter Width Wire Max RPMSpherical – Use with Steel13-C215 1-1/2” 1-1/2” 0.008” 20,00013-C225 2” 2” 0.010” 20,00013-C230 3” 3” 0.0118” 15,000Spherical – Use with Stainless and Aluminum13-C265 1-1/2” 1-1/2” 0.008” 20,00013-C275 2” 2” 0.010” 20,00013-C280 3” 3” 0.0118” 15,000

Part No. Diameter Width Arbor Wire Max RPM13-J454 4-1/2”

5/8” 5/8-11” 0.0118”12,500

13-J504 5” 10,00013-J604 6” 9,000

Part No. Diameter Arbor Grit Max RPM15-T453 4-1/2”

7/8” 3613,300

15-T503 5” 12,20015-T603 6” 10,20015-T703 7” 8,600

Part No. Diameter Arbor Grit Max RPM15-W454

4-1/2” 7/8”40

13,30015-W456 6015-W458 8015-W462 12015-W504

5” 7/8”40

12,20015-W506 6015-W508 8015-W512 12015-W604

6” 7/8”40

10,20015-W606 6015-W608 8015-W612 12015-W704

7” 7/8”40

8,60015-W706 6015-W708 8015-W712 120

Part No. Diameter Arbor Grit Max RPM15-X473

4-1/2” 5/8-11”

36

13,30015-X475 5015-X476 6015-X478 8015-X482 12015-X523

5” 5/8-11”

36

12,20015-X525 5015-X526 6015-X528 8015-X532 12015-X723

7” 5/8-11”36

8,60015-X726 6015-X728 8015-X732 120

Part No. Diameter Thread Colour Max RPM15-M144 4-1/2” 5/8-11” Black 13,30015-M145 White15-M154 5” 5/8-11” Black 12,20015-M155 White15-M157 7” 5/8-11” Black 8,60015-M158 White

Part No. Diameter Width Arbor Wire Max RPMUse with Steel 13-M454 4-1/2” 2” 5/8-11” 0.010” 4,000

Use with Stainless Steel & Non-Ferrous Metals

NON-FERROUS

13-M464 4-1/2” 2” 5/8-11” 0.010” 4,000

eRGoFleX™ •Designed to maximize workplace safety and ergonomics without sacrificing productivity •Designed for extremely smooth, comfortable blending of both flat and curved surfaces •Less risk of gouging compared to traditional grinding wheels •Advanced Cyclone Technology abrasive grain blend removes material fast for improved productivity

FleXSteel™ •High performance flap disc optimized for use on low powered angle grinders •Brings quality to workers with less powerful tools •Special zirconia alumina grain blend self-sharpens with less pressure •Provides a high removal rate and decent life on steel •Trimmable backing extends disc life •The more economical choice when blending sharp corners, heavy deburring or blending in fillet welds

coolcut XX™ Quick cHAnGe WitH SPin-on™ SYSteM •Quick-Change format for easier mounting and faster disc change outs

NON-FERROUS

Part No. Dia. Thickness Arbor Grade Max.RPM

TYPE 1 11-L202 2” 1/32” 1/4” A-24 30,60011-L212 1/16”11-L203

2”

1/32”

3/8” A-60 30,60011-L213 1/16”11-L223 1/8”11-L233 1/4”11-L253 1/2”11-L211

2”1/16”

5/16” A-24 30,60011-L221 1/8”11-L231 1/4”11-L251 1/2”11-L262 2-1/2” 1/16” 1/4” A-24 30,35011-L263 1/16” 3/8”11-L302 3” 1/32” 1/4” A-60 25,47011-L316 1/16”11-L303 3” 1/32” 3/8” A-60 25,47011-L317 1/16”11-L312 3” 1/16” 1/4” A-24 25,47011-L322 1/8”11-L313

3”1/16”

3/8” A-24 25,47011-L323 1/8”11-L333 1/4”11-L353 1/2”

Part No. Dia. Thickness Arbor Grade Max.RPM

TYPE 1 11-L402

4”1/32”

1/4”A-60

19,10011-L406 1/32” A-2411-L412 1/16”11-L403

4”

1/32”

3/8”

A-60

19,10011-L417 1/16”11-L413 1/16”

A-2411-L423 1/8”11-L433 1/4”11-L453 1/2”11-L405 4” 1/32” 5/8” A-60 19,10011-L415 1/16” A-24

TYPE 27 11-L308 3” 1/32” 3/8” A-60 25,47011-L408 4” 1/32” 3/8” A-60 19,100

Type 29

Type 27


Spoolarc 65AWS A5.18: eR70S-2 H4Spoolarc 65 is a triple deoxidized (Aluminum, Titanium, Zirconium) welding wire designed for welding over rust and mill scale. The less fluid weld puddle of Spoolarc 65 makes it easy to control when used out of position. Spoolarc 65 is the preferred wire for all position welding of small diameter pipe. It is available in forms suitable for MIG and TIG welding.

Spoolarc 86AWS A5.18: eR70S-6 H4Spoolarc 86 is a copper-coated solid wire containing high levels of manganese and silicon. Spoolarc 86 is suitable for many carbon steel welding applications using the MIG process. The high levels of deoxidizers in Spoolarc 86 provide excellent tolerance of rust and mill scale. The high levels of manganese and silicon also provide excellent wetting action and a highly fluid weld puddle. Shielding gas choices for Spoolarc 86 in the GMAW mode are 100% carbon dioxide, argon/carbon dioxide mixtures, argon/oxygen mixtures, and other argon based mixed gas blends. Spoolarc 86 excels in HVAC duct work, heavy equipment fabrication, structural, and other general steel fabrication.

ok tigrod 308lWerkstoffnummer :~1.4316, SFA/AWS A5.9: eR308l, en iSo 14343-A:W 19 9 lOK Tigrod 308L has a good general corrosion resistance. It also has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. ~For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilized steels of the same type if the service temperature will not exceed 6,500°C. OK Tigrod 308L can also be used for welding of Cr-steels except in sulphur rich environments.

ok tigrod 316lWerkstoffnummer :~1.4430, SFA/AWS A5.9: eR316l, en iSo 14343-A:W 19 12 3 lBare corrosion resisting chromium-nickel-molybdenum welding rods for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-types. ~OK Tigrod 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as in shipbuilding and various types of architectural structures.

ok tigrod 309lWerkstoffnummer :~1.4332, SFA/AWS A5.9: eR309l, en iSo 14343-A:W 23 12 lBare corrosion resisting chromium-nickel welding rod for welding of similar steels of 244% Cr, 13% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using the wire for buffer layers and dissimilar joints it is necessary to control the dilution of the weld. ~OK Tigrod 309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.

NEW ESAB®

Mild Steel Wires

Stainless Steel TIG Rods

ESA/2122

Mechanical PropertiesAs Welded 100% Ar Yield Strength: 67 ksi, 460 MPa Tensile Strength: 79 ksi, 545 MPa Elongation: 26%As Welded 98% Ar - 2% O2 Yield Strength: 70 ksi, 480 MPa Tensile Strength: 82 ksi, 565 MPa Elongation: 26%

Mechanical PropertiesAs Welded 100% CO2 Yield Strength: 68 ksi, 470 MPa Tensile Strength: 82 ksi, 565 MPa Elongation: 30%As Welded 75% Ar - 25% CO2 Yield Strength: 72 ksi, 497 MPa Tensile Strength: 86 ksi, 593 MPa Elongation: 27%

Part No. Suitable For

Package Weight Diameter

1041F08TIG 22.7 kg

1/16”1041F10 3/32”1041F12 1/8”1042F05

MIG 20.0 kg0.035”

1042F07 0.045”1042F08 1/16”

Part No. Package Weight Diameter

1387E3422.7 kg

1/16”1387E30 3/32”1387E32 1/8”

Mechanical PropertiesYield Strength: 70 ksi, 480 MPaTensile Strength: 88.5 ksi, 610 MPaElongation: 36%

Mechanical PropertiesYield Strength: 68 ksi, 470 MPaTensile Strength: 87 ksi, 600 MPaElongation: 32%

Mechanical PropertiesYield Strength: 62 ksi, 430 MPaTensile Strength: 85.5 ksi, 590 MPaElongation: 40%

Part No. Package Weight Diameter Length

161016R1505.00 kg

1/16”39.4”161024R150 3/32”

161032R150 1/8”


163016R1505.00 kg

1/16”39.4”163024R150 3/32”

163032R150 1/8”163040R150 5/32”


165316R1505.00 kg

1/16”39.4”165324R150 3/32”

165332R150 1/8”


MARKAL®

Paintstiks®

III/2631

B PAintStik® SoliD PAint – AMBient SuRFAce MARkeRS•Real lead-free paint in stick form; combines long-lasting durability of paint with the ease-of-use of a crayon •Weather-resistant, UV-resistant •Ideal for layout, color coding, fabrication and identification •Marks through oil and water •Marks on smooth, rough, rusty or dirty surfaces •For use on metal, wood, plastic, concrete, rubber, glass, cardboard and paper •Marking range: -46° to 66°C •Standard Size: 11/16” x 4-3/4” •Lead-free, non-toxic •Standard package 12 per box

Part No. Colour80295 White (3/card)80296 Yellow (3/card)80220 White80221 Yellow80222 Red80223 Black80224 Orange80225 Blue80226 Green80227 Pink80229 Brown

NEW

NEWRUST-OLEUM®

Primer

RUS/3457

concRete SAVeR® HARD SuRFAce PRiMeR•Two component, water-based epoxy primer designed to improve the adhesion of paints and coatings to difficult substrates •Specially formulated as a primer for hard smooth surfaces •It can be applied to hard troweled concrete, quarry tiles, ceramic tiles and aluminum to aid the adhesion of subsequent coatings •Overcoat with most types of floor paint •Minimal prep for hard to coat surfaces •Add longevity to line striping •Topcoat window (8 hours to 7 days without sanding) •Zero VOC •Full cure time: 7 days •Flat GreyPart No. 313973.

DiRect WAteR line PluMB kit•Allows for a direct water line connection •Does not include filter, water line or fittings •This tank allows you to hook up your own water line directly to the Keurig K155 Brewer Part No. 75-95076.

KKK/2486KEURIG®

K-Cup® Brewing SystemNEW

o’keeFFe’S WoRkinG HAnDS & Feet •A concentrated hand and foot cream that heals, relieves and repairs extremely dry, cracked hands and feet •Instantly boots moisture levels •Creates a protective layer on the skin’s surface •Helps prevent further moisture loss •Guaranteed relief •Non-greasy •Unscented •Hypoallergenic •3.4 oz.

NEWO’KEEFFE’SFoot & Hand Cream

III/3799

Part No. DescriptionK1350001 Hand CreamK1320001 Foot Cream


NEW IGLOO COOLERSCooler

IGL/2531

MAXcolD 165 QuARt cooleR•Ultratherm insulation for extended ice retention performance (7 days) •Cool Riser Technology improves cooling performance by elevating away from hot surfaces •Quick access hatch provides access to cooler without opening the entire lid •280 (12 oz.) can capacity •Wide reinforced swing-up handles with tie-down loop •Dual snap fit latches •4 self-draining drink holders in lid •Threaded drain plug •Stain and odour-resistant liner •Child safety latch •Polyurethane material •White •165 quart capacityPart No. 49628.

LLL/2254

WAL/3675

SuPeR Fuel StoRAGe StABiliZeR•Highly effective formula specifically formulated to provide significant performance benefits in all diesel fuels, including ultra low sulfur diesel and bio-diesel fuel blends •It is a concentrated blend of additives that will slow or prevent the aging of diesel fuel and home heating oil •Contains metal deactivators to prevent aging, dispersants to prevent sludge formation and anti-oxidants and stabilizers •Treatment Rate: the recommended treatment rate is 1 gallon to 2,000 gallons of fuel (1 quart to 500 gallons). For best results, add product to the fuel tank before filling to assure good mixing. If added to existing stored fuel it is recommended the fuel be recirculated •NOTE: Super Fuel Storage Stabilizer is specifically recommended for fuel used in auxiliary diesel generators and stored fuel used in home heating applications

NEW

NEW

FPPF®

Fuel Stabilizer

WALTERChemical

Part No. Size Treats00602 32 oz. bottle 500 gal.00510P 5 gal. pail 10,000 gal.

non-FlAMMABle contAct cleAneR •Removes grease, oil and contaminants from sensitive electronics and electrical equipment to prevent contact failure •Fast-evaporating formula dries residue-free in seconds •Safely cleans most plastics and rubber compounds •Invert valve can be rotated 360° •Nonconductive •No Flash •VOC compliant •Strong aerosol jet •12 oz. can (340 g)Part No. 53-C712.

e-WelD PlASMA™ & SPRAYeR•Ceramic anti-spatter solution is applied to cutting tables to reduce the buildup of slag over time •By using the ergonomic arm-mounted sprayer, you can quickly coat large surface areas •Greatly reduces the amount of time required to remove slag from cutting tables •Spend less time on equipment maintenance and more time on revenue generating activities •Can also be applied to other equipment that is exposed to weld spatter or slag •Spray gun applicator dispenses a thin, even layer to help prevent wasteful over application •Helps prevent wear to slats, which can prolong the working life and prevent the creation of uneven cutting surfaces over timePart No. Description53-L125 Sprayer53-F605 Liquid – 22 lbs. (10 kg)

53-F605

53-L125

LLL/3382 RECOCHEMDiesel Exhaust Fluid (DEF)

Diesel Exhaust Fluid (DEF) is a pure, aqueous solution of urea (32.5%) and water, used in new diesel powered engines with Selective Catalytic Reduction (SCR) technology. This operating fluid is contained in a separate DEF tank and is sprayed into the exhaust to chemically reduce the engine’s nitrogen oxide (NOX) emission levels and lower the impact of vehicle emissions on the environment.Part No. SizeNV-208-DEF 208 litre drum with no EPV valve

NEW

Now available without EPV valve!


LUCAS OILAutomotive Oils

Fuel Treatments

Transmission Oils

NEW

coMPlete enGine tReAtMent•A unique formulation that cleans and lubricates multiple systems in your vehicle •When added to fuel, it cleans and lubricates all components from the fuel tank to the cylinders •It removes deposits, protects against corrosion and helps the fuel to burn more completely, which helps to lower emissions, improves fuel mileage and increases power •When added to your oil, it cleans your engine and forms a protective barrier against heat and friction, improves oil flow in cold weather and extends oil life •For all engines and oil types •473 mLPart No. 20016.

DeeP cleAn™ Fuel SYSteM cleAneR•Lubricates and cleans the entire fuel system •Reduces green house gas emissions (carbon monoxide, hydrocarbons, NOx) •Increases power and acceleration and improves MPG •This product is alcohol free and oxygen sensor safe •Deep Clean, a REAL fuel system cleaner •155 mL Part No. 10669.

Anti-Gel colD WeAtHeR DieSel tReAtMent•Designed to prevent cold filter plugging, fuel thickening and gelling in ULSD, diesel and bio-diesel fuels •Manufactured with the highest quality components to provide maximum performance •It contains REAL water dispersants to effectively remove moisture from the entire fuel system •Contains no alcohol, will not void OEM warranties and has no harmful effects on diesel particulate filters •Lowers the cold filter plugging point to -23.3°C • For temperatures below -23.3°C add a second bottle for protection down to -40°C

AutoMAtic tRAnSMiSSion FluiD conDitioneR•Designed to provide ATF’s with enhanced performance •A unique Lucas additive chemistry prolongs fluid life, reduces wear, conditions seals, reduces noise and shudder and maintains cold temperature properties even under the most adverse conditions •It is designed as a preventative measure in both new and older foreign and domestic transmissions and is compatible with both synthetic and conventional ATF’s •Not recommended for use in CVT and Ford Type F transmissions •591 mLPart No. 20441.

Part No. Size Treats20865 946 mL 150 gallons20866 1.893 L 300 gallons

LUC/2665

HiGH MileAGe Fuel tReAtMent•Created specifically to restore lost power and performance in high-mileage vehicles •Cleans and lubricates fuel system components, removes valve deposits, lessens oil contamination and stops knocking and hesitation •Works great in modern port-injected engines – maintaining maximum flow and providing lubrication to critical parts •Contains no alcohol •Oxygen-sensor safe •155 mLPart No. 20977.

DieSel DeeP cleAn™•Developed to reduce the cost and hassle of particulate filter maintenance •It is an excellent preventative maintenance product •It causes the fuel to burn much cleaner, thus eliminating a lot of particulate matter that would otherwise go into the exhaust system causing “regens” •Cleans out much of the matter already trapped in the filter •Eliminates exhaust back pressure allowing the engine to run easier and cooler as well as lowering the aggravation and down-time associated with particulate filters •473 mLPart No. 20872.

SYntHetic MotoR oilS•Formulated with the highest quality synthetic base stocks and an exclusive high performance additive system, including lubricity and anti-seize agents •Meets or exceed current API specifications •These oils have excellent cold temperature properties and are compatible with both conventional and synthetic engine oils •946 mLPart No. Description20564 Syn SAE 0W-2020211 Syn SAE 0W-40

MARine Fuel tReAtMent•Designed specifically to address the issues watercraft owners experience with their engines and fuel systems •Fights corrosion, keeps fuel lines, carburetors or fuel injectors clean and free of deposits while lubricating and protecting vital engine parts •Powerful detergents, including polyether amines, improve cleanliness in the fuel system and internal engine parts •It’s designed for gasoline and diesel engines, 4-stroke or 2-stroke •Upper cylinder lubricants ensure smooth operation and longer engine life •946 mLPart No. 10981.

SYntHetic 80W-85W tRAnSMiSSion oil•Blended with an extra additive package, over and above the normal gear oil additives •With this product, you can expect longer oil life, lower oil temperatures, longer component life, fewer seal leaks and LESS NOISE •946 mLPart No. 20778.

octAne BooSteR•A genuine performance enhancer •Tested and proven to deliver three times more boost than most other brands •It is safe for turbos, oxygen sensors and catalytic converters •Stops knocks and raises MPG in high compression engines •Safe for any gasoline engine •Not recommended in 2-stroke engines •155 mLPart No. 10930.


Lubricating Greases

Motorcycle Oils

Miscellaneous Products

NEWLUC/2665 LUCAS OILATV & 2 Cycle Oils

SeMi-SYntHetic 2-cYcle oil•Clean burning formulation is what the world has needed for years • It is smokeless because the “would be” emissions are burned, thereby increasing performance and fuel economy •Expect less filter clogging and longer engine life

SYntHetic 2-cYcle SnoWMoBile oil•Formulated with a special blend of synthetic oils and a low ash additive package to lower exhaust emissions •It also contains a special package of detergents and lubricants exclusive to this formula alone •Especially designed for snowmobile applications but can be used in all 2-cycle applications where low ash systems are required •Contains supplemental additives to provide high performance in equipment with power valves as well as excellent cold temperature properties

MARine 2-cYcle oil tc-W3® SYntHetic BlenD•Specifically formulated to address the performance requirements of water-cooled 2-cycle outboards and personal watercraft •It is fortified with a unique Lucas additive chemistry and an ashless detergent inhibitor package to minimize spark plug fouling, pre-ignition and ring sticking •Mix ratio is 50:1 and is recommended for use in pre-mix or direct injection systems •NMMA TC-W3® certified (RL-13125P)

Part No. Size20058 77 mL20059 189.8 mL

Part No. Size20835 946 mL20847 3.786 L

Part No. Size10860 946 mL10861 3.786 L

20058

20059 20835 2084710860 10861

ReD ‘n’ tAckY GReASe•Is a smooth, tacky, red lithium complex grease fortified with a high degree of extreme pressure additives that give a TRUE Timken load much higher than other greases of this type •It stays in U-joint and resists wash-out, making it the perfect truck grease •It exceeds OEM “Lube For Life” specifications •454 gramsPart No. 10574.

WHite litHiuM GReASe•Formulated with the highest quality base oils and additives to provide mild anti-wear properties •Packaged in 8 oz. squeeze tubes for ease of application •It is recommended for use in plain and anti-friction bearings operating under moderate load conditions •Recommended for use in automotive chassis, trucks, tractors and contractor equipment •Not recommended for use in wheel bearings •This product is truly a versatile grease with applications in industrial, automotive and household, including garage door openers, springs, hinges, etc. •227 gramsPart No. 10533.

PRiMARY cHAincASe oil•Blend of easy flowing base oils and a Lucas additive package designed to carry away more heat from the clutch and friction plates •This assures a longer, more trouble-free clutch life •Expect a smooth clutch action, less slippage, longer chain and sprocket life and much longer oil life •Designed for heavy-duty and high performance situations •946 mLPart No. 20790.

HiGH PeRFoRMAnce MotoRcYcle oilS•Built for endurance •These oils will lower oil temperatures, extend the life of vital components, reduce noise and leaks and increase performance •946 mL

Part No. Description10793 Syn SAE 10W-4010777 Syn SAE 10W-40 JASO MB20767 SAE 10W-40

SYntHetic SAe 75W-140 V-tWin GeAR oil•Blended with the highest quality synthetic base oils and a Lucas synthetic additive package that makes it superior to any other motorcycle gear oil •Expect a cool, quiet performance with a minimum wear and minimum drag •Stands up to high horse power and high temperature •Designed especially for V-Twins but excellent for use in any heavy-duty or high performance transmission •946 mLPart No. 20791.

cHAin luBe AeRoSolFormulated to penetrate deeply into the pins and bushings of the chains. Provides excellent rust and corrosion protection as well as outstanding water resistance. Does not sling off; resists rust. Tested by professional motorcycle riders and can be used on all chain types. Sprays in any direction, even upside down, and has a unique foam property.Part No. 20393.

PoWeR SteeRinG FluiD WitH conDitioneRS•Formulated with the highest quality synthetic base oils and unique Lucas additive chemistry to prevent power steering leaks, provide smooth operation and eliminate squealing •Compatible with both synthetic and conventional power steering fluids and provides excellent performance in both domestic and foreign vehicles including Hondas •It can be used as makeup or as a complete change out and has excellent cold temperature properties •473 mLPart No. 20442.

tool BoX BuDDY•Formulated with a unique Lucas additive chemistry that lubricates, penetrates, dissolves rust and provides indoor and outdoor rust protection against water, even salt water •It eliminates squeaks, is low odour and sprays in any direction, even upside down •It lubricates better, penetrates deeper and cuts rust faster than any other products •Excellent for locks, air tools, or anything exposed to moisture •Fits easily in any tool box •Excellent for household use •Does not contain harmful solvents •311 gramsPart No. 20392.

SuPeR coolAnt•Scientifically formulated to provide the ultimate protection in automotive and racing cooling systems •It protects the entire system from rust, corrosion and electrolysis including aluminum and has been proven to reduce coolant temperatures up to -6.67°C •Its unique formula prevents deposits that can cause overheating •Lower cylinder head temperatures mean advanced ignition time and more horsepower •473 mLPart No. 20640.

HiGH PeRFoRMAnce FoAM FilteR oil•A unique low solvent, low viscosity formula designed to penetrate the filter media and trap dust, dirt and sand while improving air flow •Because it has a slight tackiness it stays in place throughout the service life •Its waterproof formula helps block out moisture and water •Will not clog foam filters even in colder temperature applications •Its blue colour ensures coverage across the entire filter area •946 mLPart No. 20798.

MetAl PoliSH•Cleans, polishes and protects aluminum and other metals including chrome, magnesium, stainless steel, silver, brass and gold •It gives a deep shine and maximum luster with little effort •This fast acting metal polish is simple to use and is safe on all metals •It contains no acid or ammonia •473 mlPart No. 20155.

FiSHinG Reel oil•Special blend of oil and additives specifically designed to lubricate all moving parts in fresh water and salt water fishing reels •This product provides protection against rust and corrosion even under the most adverse conditions •The new leak proof one-drop applicator allows just the right amount of lubricant to be applied in hard to reach areas •Packaged in an attractive countertop display •29.6 mLPart No. 10690.


cHelSeA jAcket•Polycotton (79% cotton, 21% polyester – 295 g/m2) •YKK Vislon center front zip •Extra insulation at shoulders •No shoulder seams •Reflective elements •Brushed polyester inside collar and cuffs •Two pockets at front with zippers •Two large inner pockets with Velcro closure •Two chest pockets with flaps and push button closure •Plastic covered metal buttons •Velcro adjustment at cuffs •Push button adjustment at each side of the waist •Expansion in back for increased freedom of movement •Tail drop

cHelSeA WoRk PAnt•Polycotton (79% cotton, 21% polyester – 295 g/m2) •YKK zipper •Plastic covered metal buttons •Thigh pocket with flap for accessories/tools •Two back pockets, one with flap and Velcro closure •Ruler pocket with double bottom in Cordura® fabric •Broad center back belt loop for extra stability and strength •Gusset at crotch •Reinforcement at knee and bottom leg •Knee pad pockets in Cordura® fabric •Knee pad position can be adjusted +/- 5 cm for better fit •Fold at bottom hem with the option to extend the length by 5 cm

cHelSeA conStRuction PAnt•Polycotton (79% cotton, 21% polyester – 295 g/m2) •YKK zipper •Plastic covered metal buttons •Thigh pocket with flap for accessories/tools •Two hanging pockets in Cordura® fabric with double bottom for extra durability and nylon webbing •Ruler pocket with double bottom in Cordura® fabric •Two back pockets, one with flap and Velcro closure •Broad center back belt loop for extra stability and strength •Gusset at crotch •Loops with double Velcro on both sides for hammer holders •Reinforcement at knee and bottom leg •Knee pad position can be adjusted +/- 5 cm for better fit •Fold at bottom hem with the option to extend the length by 5 cm

cHelSeA lineD jAcket•Polycotton (79% cotton, 21% polyester – 295 g/m2) •Insulation: 100% polyester – 350 g/m2 •YKK Vislon center front zip •Extra insulation at shoulders •No shoulder seams •Reflective elements •Brushed polyester inside collar and cuffs •Two pockets at front with zippers •Two chest pockets with Velcro flaps and push button closure •One large inner pocket with Velcro closure •Plastic covered metal buttons •Velcro adjustment at cuffs •Push button adjustment at each side of the waist •Expansion in back for increased freedom of movement •Tail drop

NEWHELLY HANSENClothing & Bags

HEL/2475

Size Part No.Timber/Black

Part No.Black/Charcoal

Small 76040-779-S 76040-999-SMedium 76040-779-M 76040-999-MLarge 76040-779-L 76040-999-L

X-Large 76040-779-XL 76040-999-XL2X-Large 76040-779-2XL 76040-999-2XL3X-Large 76040-779-3XL 76040-999-3XL4X-Large 76040-779-4XL 76040-999-4XL

Size Part No.Timber/Black

Part No.Black/Charcoal

Small 76041-779-S 76041-999-SMedium 76041-779-M 76041-999-MLarge 76041-779-L 76041-999-L

X-Large 76041-779-XL 76041-999-XL2X-Large 76041-779-2XL 76041-999-2XL3X-Large 76041-779-3XL 76041-999-3XL4X-Large 76041-779-4XL 76041-999-4XL

WaistSize

Inseam 30Part No.

Inseam 32Part No.

Timber/Black30 76464-779-30/30 76464-779-30/3232 76464-779-32/30 76464-779-32/3234 76464-779-34/30 76464-779-34/3236 76464-779-36/30 76464-779-36/3238 76464-779-38/30 76464-779-38/3240 76464-779-40/30 76464-779-40/3242 76464-779-42/30 76464-779-42/3244 76464-779-44/30 76464-779-44/32

Black/Charcoal30 76464-999-30/30 76464-999-30/3232 76464-999-32/30 76464-999-32/3234 76464-999-34/30 76464-999-34/3236 76464-999-36/30 76464-999-36/3238 76464-999-38/30 76464-999-38/3240 76464-999-40/30 76464-999-40/3242 76464-999-42/30 76464-999-42/3244 76464-999-44/30 76464-999-44/32

WaistSize

Inseam 30Part No.

Inseam 32Part No.

Inseam 34Part No.

Inseam 36Part No.

Timber/Black28 76488-779-28/30 — — —30 76488-779-30/30 76488-779-30/32 76488-779-30/34 —32 76488-779-32/30 76488-779-32/32 76488-779-32/34 76488-779-32/3634 76488-779-34/30 76488-779-34/32 76488-779-34/34 76488-779-34/3636 76488-779-36/30 76488-779-36/32 76488-779-36/34 76488-779-36/3638 76488-779-38/30 76488-779-38/32 76488-779-38/34 76488-779-38/3640 76488-779-40/30 76488-779-40/32 76488-779-40/34 —42 76488-779-42/30 76488-779-42/32 — —44 76488-779-44/30 76488-779-44/32 — —

Black/Charcoal28 76488-999-28/30 — — —30 76488-999-30/30 76488-999-30/32 76488-999-30/34 —32 76488-999-32/30 76488-999-32/32 76488-999-32/34 76488-999-32/3634 76488-999-34/30 76488-999-34/32 76488-999-34/34 76488-999-34/3636 76488-999-36/30 76488-999-36/32 76488-999-36/34 76488-999-36/3638 76488-999-38/30 76488-999-38/32 76488-999-38/34 76488-999-38/3640 76488-999-40/30 76488-999-40/32 76488-999-40/34 —42 76488-999-42/30 76488-999-42/32 — —44 76488-999-44/30 76488-999-44/32 — —

90 l DuFFel BAG•Black •100% nylon fabric •Large and durable duffel bag for heavy packing •Padded straps for use as a backpack •Water repellent and wind resistant fabric •One outside pocket with zipper •Two mesh pockets insidePart No. 79565-990.

50 l tRolleY BAG•Black •Synthetic woven fabric •Perfect travel bag – approved as carry-on bag in most airlines •Water resistant fabric •Main compartment with two way zipper •One outside pocket with zipper, entry from outside and inside •One outside pocket with zipper •Extendable handle •Carry handle •Robust wheelsPart No. 79567-990.

120 l DuFFel BAG•Black •100% nylon fabric •Helly Hansen’s biggest duffel bag for those days where you want to bring everything •Durable and water resistant fabric •Padded straps for use as backpack •One outside pocket with zipper •Two mesh pockets inside •Carry handlePart No. 79568-990.


NEW CAT®

Men’s Industrial FootwearScAFFolD 8” cSA •Waterproof •Upper: full grain leather •Lining: 200G Thinsulate •Sock Liner: EASE •Midsole: Molded EVA •Outsole: T1300 •Protective Plate: Wellmax •Construction: Cement •Colour: Black

StRutS 6” cSA •Waterproof •Upper: Full Grain Leather •Lining: 200G Thinsulate •Midsole: Molded EVA •Outsole: T1300 •Protective Plate: Wellmax •Construction: Cement •Colour: Brown

tHeRMoStAtic ice+ 8” cSA •Waterproof •Upper: Full Grain Leather/Scratch Rubber •Lining: 400G Thinsulate •Sock Liner: EASE •Midsole: Molded PU •Outsole: T1340 •Protective Plate: Wellmax •Construction: Cement •Colour: Oak

CAT/4042 ©2017 CaterpillarCAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” “Caterpillar Corporate Yellow,” as well as corporate and product identity use herein, are trademarks of Caterpillar and may not be used without permission.

Size Part No.7 P-721600-7

7.5 P-721600-7.58 P-721600-8

8.5 P-721600-8.59 P-721600-9

9.5 P-721600-9.510 P-721600-10

10.5 P-721600-10.511 P-721600-1112 P-721600-1213 P-721600-13


7.5 P-721605-7.58 P-721605-8

8.5 P-721605-8.59 P-721605-9

9.5 P-721605-9.510 P-721605-10

10.5 P-721605-10.511 P-721605-1112 P-721605-1213 P-721605-13


7.5 P-721621-7.58 P-721621-8

8.5 P-721621-8.59 P-721621-9

9.5 P-721621-9.510 P-721621-10

10.5 P-721621-10.511 P-721621-1112 P-721621-1213 P-721621-13

NEW BOB DALE GLOVESGloves

cut ReSiStAnt GoAtSkin DRiVeR GloVeS•Offers heavy-duty protection, durability and strength without sacrificing comfort and fit •Grain leather goatskin provides good dexterity, wear and abrasion resistance •Kevlar® stitching •Double shirred elastic wrist •Keystone thumb

BDG/2304

Size Part No.Small 20-1-1600-S

Medium 20-1-1600-MLarge 20-1-1600-L

X-Large 20-1-1600-XL2X-Large 20-1-1600-X2LThinsulate™ Lined (C-100)

Small 20-9-1600-SMedium 20-9-1600-MLarge 20-9-1600-L

X-Large 20-9-1600-XL2X-Large 20-9-1600-X2L

EN388

ANSI

CUT LEVEL

4

LEGENDCOMPOSITE SAFETY TOE – CSA rated, are non-metallic, and undetectable in electronic security environments.

PUNCTURE RESISTANT – CAT® puncture resistant footwear meets ASTM F2413-05 PR standards with a steel mid-plate designed to prevent objects form puncturing the sole.

ERGO – Series of design principles that work together to deliver footwear that promotes foot health by integrating stability, flexibility and comfort – enhancing the natural movements of the foot.

SRX – Superior grip when you need best-in-class performance slip resistant soles.

GROUNDFLEX4™ – 1) Flexible - Engineered flex grooves and plastic shank in forefoot that move like you do 2) Comfortable - Ease cushioned footbed and molded midsole offer all day comfort 3) Waterproof - Waterproof leather with sealed seams 4) Durable - Integrated toe bumper attached to midsole, which is then stitched to the upper for ultimate durability

VIBRAM ARCTIC GRIP – Wet ice technology: •Waterproof and insulated for extra protection from the elements •Thermochromatic lug sense when temperatures drop to 0°C •Vibram arctic grip technology that grips to slippery, wet ice •Proprietary ease comfort footbed and midsole for all day, lighweight comfort •Meets CSA requirements for oil and slip resistanceTHINSULATE® INSULATION – Thinsulate® Insulation is a light, thin and highly

efficient way to keep your feet warm. Thinsulate® Insulation dries quickly and breathes efficiently.NANO SAFETY TOE – Thinner than a traditional composite toe – giving your toes more breathing room – and 40% lighter than a traditional steel toe. All this while giving you the full protection and ASTM rating of a steel or composite toe.

ELECTRICAL HAZARD – CAT® Electrical Hazard footwear is rated ATSM F2413-11 1/75 EH. Special EH construction protects the wearer against open circuits up to 14,000 volts in dry conditions.


NEWCRUSHPROOFTailpipe & Stack Adapters

CRU/1665

WiDe ADAPteR•For oval/twin tailpipes up to 2.5” x 10.5” •Designed for ultra-wide pipes on many car makes/modelsPart No. F675.

WiDe ADAPteR W/ Suction cuP•For flush mounted tailpipes •Industrial-grade suction cup will stick to any vehicle without damaging the finish and hold the adapter over the tailpipe, creating a capture shroud •Because it does not slide over the pipe, it does need to be used as part of a fan-assisted systemPart No. F675-SC.

tAilPiPe & HoSe ADAPteR•Fits 4” hose and stacks up to 7.5” O.D. •For larger applications it needs to be used with a fan-assisted systemPart No. F800-4.

NORTHHard Hats

NTH/2271; XXX/0004

cAnADA StRonG HARD HAtSShow your Canadian pride!Features: •Sleek, modern shell design is low profile •Ratchet suspension •Moisture-wicking, breathable sweatband is easily removable, washable, and replaceable •Meets ANSI Z89.1-2014 Type 1, Class E •CSA Z94.1-2015 Type 1, Class EPart No. ColourCANADA-RED RedCANADA-WHITE WhiteCANADA-BLACK Black CANADA-RED CANADA-WHITE CANADA-BLACK

Respirator Fit TestingBAnAnA oil AMPuleS •Isoamyl Acetate ampules for seal check •0.02 fl. oz. •Package of 10Part No. 7002.

iSoAMYl AcetAte/BAnAnA oil Fit teSt kit •Includes: (2) 1 oz. vials •Up to 25 testsPart No. 193140.

NEWMILLER®

Fall Protection

DAL/1743

titAn ii ReADYRooFeR® FAll PRotection lAnYARD•3 ft. polyester web lanyard with integral shock absorber and two locking snap hooksPart No. T6111-Z7/3FTAFC.

NEW

NEWSHOWA GLOVESNitrile Gloves

MMM/1395

AtlAS 772 ARX nitRile lonG SleeVe GloVe•26” gauntlet lined •Yellow •Rough FinishCharacteristics: •Fully coated, extra coating over entire hand •Extended sewn sleeve, elasticated border •Rough finish over entire surface •Antibacterial and anti-odour treatment •Anatomical shape •Cut and sewn •Eyelet for ventilation and hangingBenefits: •A flexible, robust glove offering great dexterity and with good resistance to tearing •Protects the hand from oils, hydrocarbons, grease and abrasion, with effective long lasting grip •Impermeable for working in damp or greasy environments, enabling you to grip objects securely •Sleeve stays correctly adjusted •Surface provides tactile feel and better grip •Greater hygiene •Easy hang storage •Designed for easy movement and continuous wear •Extended protection for the entire armRecommended Use: •Aerospace •Automotive •Chemical •Construction •Manufacturing •Municipal service •Oil and gas •Wet work

Size Part No.Medium 772M-08Large 772L-09

X-Large 772XL-10

EN374-3 -2003

EN374-2-2003

EN3882003


TEM/3800/3803 TEMROSilicone Pad Heaters

NEW

ADHeSiVe Silicone PAD HeAteRSSilicone pad heater that is easily installed with adhesive mounting and silicone weatherproofing for installation on smooth metal surfaces.•Reduces engine wear by improving the flow of engine fluids•Reduces pump cavitation, blown seals and burst•CSA models include thermostats

FliP cAP RecePtAcleSA bumper mount receptacle that provides a complete connection between the engine block heater and a standard 120 volt outlet. CSA Approved.Benefits: •Provides convenient access to plug in the engine block heater •Eliminate dangling power cords •Low profile flip cap receptacle •Automotive and light-duty applicationsIncludes: Receptacle with cordset and silicone connector, 16 ft. (5m) power cord, template, and receptacle installation instructions.

340-0031

340-0033 340-0034

340-0032

Part No. Watts Volts Amps Pad Size(W x L)

Power Plug

CSA Approved Oil Pan Capacity Hydraulic Fluid Application

340-0070 7 12 DC 0.6 1” x 2” — No — — Spot heating for small valves and fittings340-0071 80 12 DC 6.7 1.5” x 8” — No — 0.5 to 5.7 L —340-0031 125 120 1.0 3” Round 3-Prong Yes 2.9 to 5.7 L — Small to mid-size cars and sedans340-0074 80 12 DC 6.7 3.25” x 1.75” — No — 0.5 to 5.7 L —

340-0030 50 120 0.4 3.5” x 1.25” 3-Prong Yes 1.0 to 1.9 L N/A Transmissions, home generators, ATV, snowmobiles, gear boxes, and small engines

340-0033 250 120 2.1 3.75” x 4.25” 3-Prong Yes 4.7 to 12.3 L 10 to 30 gal. Most 6 cylinder and small block V8 engines. Marine applications340-0076 80 24 DC 3.4 4” x 1.5” — No — 0.5 to 5.7 L —340-0034 500 120 4.2 5” x 7” 3-Prong Yes 12.3 to 25.5 L 20 to 50 gal. Mid-size trucks, SUVs, and medium to heavy-duty commercial trucks340-0032 125 120 1.0 6” x 1.5” 3-Prong Yes 2.9 to 5.7 L — Ribbed oil pans and automotive transmissions340-0035 1,000 120 8.3 6” x 10.75” Yes 24.6 to 45.4 L 50 to 100 gal. Mid-size trucks, SUVs, and medium to heavy-duty commercial trucks

Part No. PlugType

ConnectorAngle

ReplacementCordsetPart No.

Application

360-0126 A Right 360-0001 —360-0129 H Right 360-0004 —360-0127 D Straight 360-0005 Aluminum and brass heaters360-0124 E Right 360-0006 Steel heaters360-0128 I Straight 360-0080 Pyroil brands only360-0125 J Straight 360-0082 GM 2006 and newer models to avoid

check engine lightPart No. 370-0002, 1.5 ft. extension.

NEW Highlighted items are new.

360-0124 360-0129360-0128 360-0125 360-0127 360-0126

PREMIER MFG. CO.Air Operated Couplings

PRM/3312 NEW

240kSA SWiVel couPlinG •This product combines the best of two technologies: Premalloy and Swivel •The 240KSA is the 240K Premalloy Coupling with a newly designed 235K swivel adapter •This product is ideal for utility companies, construction, agriculture and military applications

Part No. Description240KSA Swivel coupling235K Adapter239 Bolt kit

Features:Maximum Gross Trailer Weight: 60,000 lbs.Maximum Tongue Weight: 6,000 lbs.Ultimate Latch Capacity: 20,000 lbs.Maximum Eye X-Section: 1-13/16” (46 mm)Minimum Eye Opening: 2-3/8” (60 mm)

ReD label™ (Ride-Rite extreme Duty)•RED Label Kits utilize a pair of convoluted air springs, to raise your truck back up to manufacturer’s height while hauling or towing, when it’s loaded down. They are built to extreme specifications found in the most demanding applications. •Red Label Kits utilize high strength steel alloy brackets, grade 8 fasteners, and an enhanced coating technology protects against elemental conditions, such as corrosive de-icing agents and salt spray, helping ensure a long product life •Red Label kits can handle up to 150 PSI and level loads up to 7,500 pounds (Not to exceed vehicle’s GVWR) •The same rubber from our Airide™ product line used on Semi-trucks around the world paired with commercial grade cord gives you added durability and performance.

FRS/2201 FIRESTONERED Label™ Air Springs

NEW

flip cap receptacle


CAR-FRESHNER®

Automobile Air Freshener Products — “Little Trees”NEW

QQQ/1553

Vent WRAP•Vent wrap offers a design that is so discreet, it’s invisibly fresh. The curved clip grips the vent blade and the slim design won’t block airflow •The StediScent technology regulates the scent release for fragrance that is just right

Part No. FragrancePack of 4CTK-52225 Caribbean ColadaCTK-52226 Cherry Blossom

HoneyCTK-52231 Black IceCTK-52232 VanillaromaCTK-52233 New CarCTK-52234 Bayside Breeze

TRYGGTire Chains

TRY/2855NEW

SuPeR 2000 tiRe cHAinS – 7 MM•35% less weight than 8 mm chain •With nickel and higher oversized square studs

Single Dual TripleTire ApplicationsWithout

CamsWith Cams

Without Cams

With Cams

490053 — — — 8.5-17.5_225/85-16_225/75-17.5 7.50-16_215/85-16490062 — — — 235/75-15_235/70-16_215/75-17.5_215/80-15490063 — — — 8.25-15_235/75-17.5_235/85-16_225/70-19.5490073 — — — 235/70-19.5_245/70-17.5_245/85-16_245/70-19.5_255/85-16 265/65-17490082 — — — 245-16_245/60-19.5_31x11.50-15 10-16.5_245/85-16_265/70-15_275/60-17_245/60-19.5_32-11.50-15_10R-17.5490165 — — — 265/70-22.5_10-19.5_255/70-22.5 8.25-20_9-22.5490181 — — — 275/70-16_32x11.50-15_265/70-17_245-16_245/60-19.5_31x11.50-15 10-16.5_245/8516_265/70-15_275/60-17_10R17.5490364 — — — 9.00-20_10-22.5_285/70-22.5490374 491374* 494374 495374 10.00-20_11-22.5_11R-22.5490375 491375 494375 495375 10.00-22, 11R-24.5490384 — 494384 495384 11.00-20_12-22.5_295/80-22.5_305/75-24.5_315/75-22.5490446 — — — 435/65-22.5_445/65-22.5_395/85-20_18R-19.5490183 — — — 280/85-16490391 — — — 36X12.50-15490392 — — — 305/70-19.5490413 — — — 15-19.5*Only fits 10.00-20

NEW

MiniAtuRe BulBS

MiniAtuRe BulBS – cARDeD

LIG/3200/3207PHILIPS/SYLVANIA/GE/WAGNERMiniature Bulbs

NEW

Part No. VoltsAmps

or Watts

Average Life (hrs.) Base Application

T-6-1/2 Miniature Bulbs7444NA 12 21W 500/1000 Wedge Auto Japanese Vehicle

Part No. VoltsAmps

or Watts

Average Life (hrs.) Base Application

H-19 Miniature BulbsBPH19 12 24W n/a PG20/3 Fog Light Bulb

7444NA

BPH19


NEW BRASS FITTINGSBrass Hose Barb Fittings

BRA/3040

SWiVel couPleR HoSe BARB X FeMAle StRAiGHt PiPe

Part No. Hose I.D.

Pipe Thread

131-3A 3/16” 1/8”-27131-4A

1/4”1/8”-27

131-4B 1/4”-18131-4C 3/8”-18131-5B 5/16” 1/4”-18131-6B 3/8” 1/4”-18131-6C 3/8”-18131-8C 1/2” 3/8”-18131-8D 1/2”-14131-12E 3/4” 3/4”-14

EATON AEROQUIPMedium Pressure - Hose

AER/1040

GH194 AQP Hi-iMPulSe® MAtcHMAte Blue HoSe – MeetS SAe 100R1At type S, en853 1Sn, iSo 1436-1 type 1SnConstruction: AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover.Application: Petroleum and fire-resistant hydraulic fluids, fuel and lubricating oils, gasoline, water and other industrial fluids.Operating Temperature Range: -40°C to 150°C

Part No. Hose I.D. O.D. Max Operating Pressure Min. Burst Pressure Min. Bend Radius WeightDash inch inch mm psi bar psi bar inch mm lbs/ft kg/m

GH194-4 -4 0.25 0.53 13.4 3,250 224 13,000 896 4.00 100 0.17 0.25GH194-6 -6 0.38 0.69 17.5 3,000 207 12,000 827 5.00 125 0.25 0.37GH194-8 -8 0.50 0.81 20.6 2,500 172 10,000 689 7.00 180 0.30 0.45GH194-10 -19 0.63 0.94 23.9 2,000 138 8,000 552 8.00 205 0.36 0.54GH194-12 -12 0.75 1.09 27.7 1,800 124 7,200 496 9.50 240 0.46 0.68GH194-16 -16 1.00 1.41 35.8 1,300 89.6 5,200 359 12.0 300 0.66 0.98GH194-20 -20 1.25 1.73 43.9 900 62 3,600 248 16.5 420 0.85 1.26GH194-24 -24 1.50 2.05 52.1 725 50 2,900 200 19.7 500 1.06 1.58 NEW


Part No. DescriptionET1187-001 Bench Mount Machine, no pump, no tooling, base machine onlyET1187-002 Truck Mount Machine, no pump, no tooling, base machine onlyET1187C-0017 Bench Mount BracketET1187C-0019 Truck Mount BracketET4020TP-0002 Die Package for -4, -6, -8, -12, -16 Braided and -6, -8, -10, -12 Spiral (Includes M150, M180, M210, M240,

M280, M320, M370 Dies)

et1187 PoRtABle VARiABle cRiMP MAcHineThis economical variable crimp machine boasts a broad crimp capability with an “ease-of-use” that is sure to please hose assemblers in the field.This crimp machine has been approved to crimp:•Aeroquip TTC / Weatherhead Z series braided fittings and applicable hoses in sizes 1/4” through 1”•Aeroquip / Weatherhead TTC12/4S series spiral fittings and applicable hoses in sizes 3/8” through 5/8”•Aeroquip / Weatherhead 4S series spiral fittings and applicable hoses in sizes 3/4” through 1”Features: •Can be mounted on service vehicles or bench tops •Can be used remotely, weights only 65 lbs. •Can be powered with virtually any 10,000 psi hydraulic power source (minimum of 36 cu. inch pump reservoir capacity is required) •Utilizes existing FT1380/ET4020 diesBenefits: •Colour coded collar for core hose products makes setup fast and easy •Easily transported between job sites •Versatile power source options •Lower investment cost than other variable crimpers

AER/1070/1080EATON AEROQUIPAssembly Equipment

GH681 / H180Standard machine comes with GH681/H180 settings built in for use with TTC/Z fittings in sizes -4 through -16.

GH781 / H280Standard machine comes with GH781/H280 settings built in for use with TTC/Z fittings in sizes -4 through -16.

GH493 / H430Standard machine comes with GH493/H430 settings built in for use with TTC12/4S fittings in sizes -6 through -10, and 4S fittings in sizes -12 and -16.

Micrometer DialThe micrometer section can be used to crimp other products not captured on the 3 primary collar settings, based on crimp target settings available in PowerSource.

This machine features a patent-pending design to easily adjust to the Aeroquip and Weatherhead core products (see below). It’s as simple as turning the collar to the correct colour to match the layline on the hose, adjust the ring so that the correct size dot aligns with the correct size line on the collar and the machine is set for the correct crimp. Load the correct crimp die based on the crimp die chart attached to the machine, and the machine is ready to crimp.

SPAceR RinGS FoR et1000Part No. ColourET1000SR-M100A PurpleET1000SR-M115D YellowET1000SR-M190D Light GreenET1000SR-M265D BlackET1000SR-M280A Green /

WhiteET1000SR-M315A OrangeET1000SR-M395D SilverT-400-37 GreenT-400-38 RedT-400-112 Tan

Part No.ET1000DC-M150SET401DC-M195SET401DC-M230SET1000DC-M250SET1000DC-M295SET1000DC-M320SET1001DC-M390SET1000DC-M430SET1000DC-M475ST-420-87CPart No. ET1000AR-001, Die Ring Adapter.

colletS FoR et1000 HoSe inSeRtion GAuGeSImprove hose assembly reliability with these easy to use aluminium gauges that are designed to ensure proper fitting depth during pre-assembly. Simply bottom the hose in the appropriately marked cavity and scribe a mark on the hose flush with the top surface of the gauge. Insert the fitting until the back of the socket is aligned with scribe line. For use with all hoses that mate with 4S, 6S, TTC, TTC12 and Global Spiral TTC fittings. Part No. For Use with All Hose that Mate withFF90308-01 -4 through -16 TTC and TTC12 fittingsFF90308-02 -20 through -32 TTC and TTC 12 fittingsFF90308-03 -12, -16, -20 Spiral TTC fittingsFF90308-04 -6 through -16 4S/6S fittingsFF90308-05 -20 through -32 4S/6S fittings

NEW

NEW



NEW

ET1187-001ET1187-002

Part No. I.D.TPU-600HD 6”TPU-700HD 7”TPU-800HD 8”TPU-1000HD 10”TPU-1200HD 12”TPU-1400HD 14”TPU-1600HD 16”TPU-1800HD 18”

SF-tPuW uRetHAne DuctinG HoSeAn economical heavy duty alternative to cumbersome rubber hose. Polyurethane wall for superior abrasion resistance. UV stabilized for outdoor use. Lightweight, good flexibility and smooth interior for optimum flow. Encapsulated wire helix.Applications: •Grain vac •Leaf collection equipment •Heavy duty material handling •Plant debris collection Material: Clear urethane, encapsulated wireCompression Ratio: 2:1Temperature Range: -54°C to 93°C (-65°F to 200°F)Colour: Clear with blue helix Wall Gauge: 0.060”

NOF/2218NOVAFLEX®

Ducting Hose


NEW Highlighted items are new.

DIXONRelief Valves

RelieF VAlVeS•Designed specifically for use on trailer tanks containing dry bulk products. If a system blockage were to occur the valves are designed to vent to atmosphere once the valve pressure setting is achieved •+1/-0 set pressure tolerance (valve opens at set pressure +1 PSI) •Anodized aluminum body reduces weight •Bayloy body eliminates thread galling •Relieving capacity varies between 800 - 1700 SCFM dependent upon pressure setting •Bayloy vent cowl with aluminum upper, bronze poppet with white food grade silicone diaphragm, reduces the tendency of products that “cake” such as cement, lime and flour from sticking to the poppet •Installed cup seal deters unauthorized tampering •Quick release V clamp for easy inspection and servicing •Not for blower service

DIX/1330

Part No. Description Pressure Setting

A2182F-14.9 2” female NPT 14.9 psi relief valve 14.9A2182F-15 2” female NPT 15 psi relief valve 15A2182F-18 2” female NPT 18 psi relief valve 18A2182-M-14.9 2” male NPT 14.9 psi relief valve 14.9A2182M-15 2” male NPT 15 psi relief valve 15A2182M-18 2” male NPT 18 psi relief valve 18A2182V-14.9 2” GRUV 14.9 psi relief valve 14.9A2182V-15 2” GRUV 15 psi relief valve 15A2182V-18 2” GRUV 18 psi relief valve 18

PTC/1312 PT COUPLING COMPANYCoupling Adapters

NEW

360º SWiVel tYPe A ADAPteR X FeMAle nPt•With Viton seal

360° SWiVel tYPe D couPleR X FeMAle nPt tHReAD•With Viton seal

SWiVel RePAiR kit•Includes u-cup, bushing, bolt, and ball bearings

AluminumPart No.

Stainless SteelPart No.

Size

20A-SV-ALUM 20A-SV-SS 2”30A-SV-ALUM 30A-SV-SS 3”40A-SV-ALUM 40A-SV-SS 4”60A-SV-ALUM — 6”

AluminumPart No.

Stainless SteelPart No.

Size

20D-SV-ALUM 20D-SV-SS 2”30D-SV-ALUM 30D-SV-SS 3”40D-SV-ALUM 40D-SV-SS 4”60D-SV-ALUM — 6”

Part No. Size20SV-KITVITON 2”30SV-KITVITON 3”40SV-KITVITON 4”60SV-KITVITON 6”

A2182F-14.9

A2182M-14.9

A2182V-15


Gregg Distributors is proud to be

100% Canadian. When you buy from Gregg Distributors,

together we are reinvesting in Canada!

ALBERTA

• EDMONTON - MAIN •16215-118 Ave., T5V 1C7

Ph. (780) 4-GREGGS or 447-3447 Fax (780) 451-2528

• EDMONTON - EAST •3611 - 76 Ave., T6B 2S8

Ph. (780) 450-2233 Fax (780) 450-2266

• EDMONTON - SOUTH •3911 - 92 St., T6E 6R8

Ph. (780) 409-2000 Fax (780) 409-2100

• NISKU •1405 - 5 St., T9E 8C7

Ph. (780) 979-9988 Fax (780) 979-9989

• ACHESON •101-53016 Hwy 60, T7X 5A7

Ph. (780) 948-7111 Fax (780) 948-7222

• ATHABASCA •5006 - 52 St., T9S 1V3

Ph. (780) 675-3110 Fax (780) 675-4774

• CALGARY - MAIN •5755 - 11 St. S.E., T2H 1M7

Ph. (403) 253-6463 Fax (403) 253-5926

• CALGARY - FOOTHILLS •6130 - 51 St. S.E., T2C 4M9

Ph. (403) 203-1928 Fax (403) 236-1912

• CLAIRMONT •9802 - 84 Ave., T0H 0W0

Ph. (780) 567-2238 Fax (780) 567-2239

• DRAYTON VALLEY •6105 - 50 Ave., Box 5055, T7A 1R3

Ph. (780) 621-0056 Fax (780) 621-0057

• FAIRVIEW •9402 - 113 St., Box 2020, T0H 1L0

Ph. (780) 835-5115 Fax (780) 835-3535

• FORT MCMURRAY •325 MacAlpine Crescent, T9H 4Y4

Ph. (780) 715-4000 Fax (780) 743-8833

• GRANDE PRAIRIE •11140 - 97 Ave., T8V 3J8

Ph. (780) 513-4000 Fax (780) 513-6000

• HIGH LEVEL •10207 - 96 St., T0H 1Z0

Ph. (780) 926-2521 Fax (780) 926-3514

• LETHBRIDGE •4005 - 5 Ave. N., T1H 6Y3

Ph. (403) 328-7333 Fax (403) 328-7666

• RAINBOW LAKE •2 Rainbow Drive, Box 596, T0H 2Y0

Ph. (780) 956-2588 Fax (780) 956-2589

• RED DEER - EAST •5141 - 76A Street Close, T4P 3M2

Ph. (403) 341-3100 Fax (403) 341-3210

• RED DEER - QUEENS •191 Queens Drive, T4P 0R3

Ph: (403) 406-6044 Fax: (403) 406-6099

• SPIRIT RIVER •5202 Highway 49, Box 579, T0H 3G0

Ph. (780) 864-3333 Fax (780) 864-3330

• STRATHMORE •1020 Westridge Road, T1P 1H8

Ph. (403) 934-3710 Fax (403) 934-5453

www.greggdistributors.ca

BRITISH COLUMBIA

• FORT ST. JOHN •9404 - 111 St., V1J 7J5

Ph: (250) 785-8000 Fax: (250) 785-8022

• LANGLEY •19632 - 96 Ave., V1M 3B9

Ph: (604) 888-9588 Fax: (604) 888-4688

• NANAIMO •1935 Boxwood Road, V9S 5X9

Ph: (250) 754-1935 Fax: (250) 754-1165

SASKATCHEWAN

• SASKATOON •3066 Faithfull Ave., S7K 8H2

Ph: (306) 343-6655 Fax: (306) 343-6656

24 LOCATIONS:

Items may not be exactly as illustrated. Quantities on some items may be limited. Errors are subject to correction. ©2017 Gregg Distributors Ltd. All rights reserved.

GREGG DISTRIBUTORS LTD. DISTRIBUTORS LTD. NEW PRODUCT SUPPLEMENT CATALOGUE 3 2017 In this issue:...

Documents

Transcript of GREGG DISTRIBUTORS LTD. DISTRIBUTORS LTD. NEW PRODUCT SUPPLEMENT CATALOGUE 3 2017 In this issue:...