Greentree Eng - MASKING & PROTECTION SOLUTIONS · 2018. 6. 12. · Greentree has the ability and...
Transcript of Greentree Eng - MASKING & PROTECTION SOLUTIONS · 2018. 6. 12. · Greentree has the ability and...
MASKING & PROTECTION SOLUTIONS
OVER
65FO
R
For over 65 years Greentree has been Designing, Manufacturing and Supplying Masking and Protection products to the world’s Surface Finishing Industry.
Products manufactured in our own dedicated facilities
Facilities approved to International Standards
Approved supplier to all sections of Industry including
Heavy Industry, Air-frame and Aero-engine manufacturers worldwide
Extensive stocks of products readily available for next day delivery
Custom engineered solutions from your drawing
Approved distributor of Caplugs, 3M and other
leading manufacturers
Where Greentree leads, others follow
Greentree
Verton House
Alexandra Way
Tewkesbury
Glos GL20 8NB UK
Tel: +44(0)1684 533800
Fax: +44(0)1684 297005
www.greentree-eng.co.uk
WELCOME
Te l :+44 (0 )1684 533800INTRODUCTION
A11329
SAMPLES AVAILABLE
CONTENTS 1www.green t ree-eng .co .uk
MASKING CAPS
High Temperature Caps 4 / 5Flexible Vinyl Round Caps 6-9Tapered Silicone Cap/Plug 10Silicone Flange Caps 10Washer Caps 11Venting Cap-Plugs 11Spade Terminal Caps 12Flexible Tear-Tab Caps 12High Temperature Ribbed Caps 12
MASKING PLUGS
Plug Selector Guide / Sizing Guide 13 / Back CoverHigh Temperature Plugs 14 / 15Mouse Tail Plugs 16Hollow Cone Plugs 16Neoprene Tapered Plugs 17 MASKING SPECIALITY PLUGS
Thread Mask Plugs 18Flexible Tapered Plugs 18Flangeless Plugs 19Nitrile Flangeless Plugs 19E.P.D.M. Pull Plugs 20Silicone Pull Plugs 21Hollow Flanged Pull Plugs 22Dual Flanged Pull Plugs 22Pipe Thread Mask Plugs 22 Washer Pull Plugs 23Multi-Flanged Plugs 23Dual Purpose Washer Plugs 24Tapered Vinyl Plugs 24 Flanged Plugs 25Hollow Washer Plugs 25Hardy Plugs 26Step Plugs 26Nylon Self Threading Plugs 27Double Washer Plugs 27
CUSTOM DESIGN RUBBER 28 / 29
MISCELLANEOUS MASKING
Rubber Sheeting 30Rubber Cord 30Star Tubing 30Multi-Diameter Tubing 30Silicone Tubing 31Rubber Cut Sleeves 31
TAPES
Tape Selector Guide 32 / 33PC30 Yellow Tape 34 / 35PC21 Green Tape 34 / 35PC90 Blue Tape 34 / 35PC11 Red Tape 34 / 35#22 Polyimide Tape 34 / 35Glass Cloth Tape 36Silicone Rubber Tape 36Lead Foil Tape 37Aluminium Foil Tapes 37Paper Tapes 40 / 41
MASKING DIE-CUTS
Masking Donuts 38Masking Squares 38Masking Rectangles 38
CUSTOM DIE-CUTS 38 / 39
DISCS
PC21 Green Discs 42PC90 Blue Discs 43PC11 Red Discs 43#22 Polyimide Discs 43Kwiky-Dot™ Discs 44Glass Cloth Discs 45
HOOKS
Hooks 47Hook Load Chart 48V-Hooks, S-Hooks, C-Hooks & CV-Hooks 49Spin Hooks 50Smart Bar™ 50Tube Spring Hooks 51Mini Hooks 51
STANDARDS, QUALITY AND SERVICE 52
PLUG & CAPS SELECTION CHARTS BACKFOR THREADED HOLES & STUDS COVER
CONTENTS
A resilient reusable silicone material
recommended for temperatures to 315˚C
An economical vinyl material ideal for one-time
use recommended for temperatures to 260˚C
2 SERVING INDUSTRY WORLDWIDE
EXTENSIVE IN-HOUSE FACILITIESWith its own dedicated in house design,
development and manufacturing facilities
in Europe, North America and the Far East,
Greentree has become a leading supplier
to the finishing and engineering industry
worldwide.
Industries from Aerospace to Automotive,
Off-Shore to Electronics all benefit from the
knowledge and expertise of over 65 years
experience together with our investment in
facilities to provide our customers with a
service second to none.
Our facilities include:
Product and materials design and development
Compression moulding
Transfer moulding
Injection moulding
Vinyl dip moulding
Die-cutting
Wire bending
Rapid prototyping
Kitting and packing
Extrusion
ISO 9001 approved
Kanban supplied products
For more information call us on
+44(0) 1684 533800 or e-mail us
Te l :+44 (0 )1684 533800
OVER
65FO
R
SAMPLES AVAILABLE
www.green t ree-eng .co .uk SERVING INDUSTRY WORLDWIDE 3
SERVING INDUSTRY WORLDWIDEIn addition to the standard product lines shown in this catalogue,
Greentree has the ability and the resources to manufacture
non-standard parts in a variety of materials to meet your needs.
Please call us on +44 (0)1684 533 800 to discuss.
Recommended for powder coating, e-coating, plating, anodising & spray painting
Ultrabake™ reusable caps
Designed to mask plain, threaded studs and tube ends
Push-on pull-off design
Can also be used as a plug using a dowel or protrusion
Temperatures up to 315ºC
The cap is flexible to fit over a number of diameters and shapes
4 MASKING CAPS
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C
SC37-0500 CLEAR 0.94 2.54 12.70 1000
SC62 DARK BLUE 1.58 4.75 25.40 1000
SC70 CLEAR M2 2-56 1.78 4.32 25.40 1000
SC93 PINK M2.5 x .045 3-48 2.36 4.95 19.05 1000
SC93-0500 DARK GREY 3-48 2.36 4.95 12.70 1000
SC93-1000 WHITE 3-48 2.36 4.95 25.40 1000
SC100-0500 DARK BLUE M3 4-40 2.54 5.08 12.70 1000
SC100 LIGHT GREEN M3 4-40 2.54 5.08 25.40 1000
SC109-0500 YELLOW 5-40 2.77 5.46 12.70 1000
SC109 GREY 5-40 2.77 5.46 19.05 1000
SC109-1000 WHITE 5-40 2.77 5.46 25.40 1000
SC125-0500 LIGHT BLUE 6-32 3.18 6.35 12.70 1000
SC125 BLACK 6-32 3.18 6.35 25.40 1000
SC140-0500 CLEAR 3.56 6.73 12.70 1000
SC140 WHITE 3.56 6.73 25.40 1000
SC148-0500 DARK BLUE M4 3.76 6.10 12.70 1000
SC148-0750 DARK GREY M4 3.76 6.10 19.05 1000
SC148 PINK M4 3.76 6.10 25.40 1000
SC156-0500 LIGHT GREEN 8-32 3.96 7.11 12.70 1000
SC156 YELLOW 8-32 3.96 7.11 25.40 1000
SC156-1250 CLEAR 8-32 3.96 7.11 31.75 1000
SC164-1000 BLACK 4.17 7.42 25.40 1000
SC172-0500 GREY 10-24 4.38 7.62 12.70 1000
SC172 LIGHT BLUE 10-24 4.38 7.62 25.40 1000
SC172-1500 CLEAR 10-24 4.38 7.62 38.10 1000
SC180 BLACK M5 4.57 7.11 25.40 1000
SC187-0500 WHITE 12-24 4.75 8.00 12.70 1000
SC187-0750 LIGHT BLUE 12-24 4.75 8.00 19.05 1000
SC187 CLEAR 12-24 4.75 8.00 25.40 1000
SC218 YELLOW 5.54 8.59 25.40 500
SC223-0500 DARK BLUE M6 5.66 8.76 12.70 500
SC223-1000 BLACK M6 5.66 8.76 25.40 500
SC223 PINK M6 5.66 8.76 38.10 500
SC234-0500 WHITE 1/4-20 5.94 9.14 12.70 500
SC234 LIGHT GREEN 1/4-20 5.94 9.14 25.40 500
SC234-1500 YELLOW 1/4-20 5.94 9.14 38.10 500
SC250-0500 CLEAR 6.35 9.65 12.70 500
SC250 GREY 6.35 9.65 25.40 500
SC281-0500 YELLOW 5/16-18 7.14 10.16 12.70 500
SC281 LIGHT BLUE 5/16-18 7.14 10.16 25.40 500
SC295-0500 BLACK M8 7.49 10.67 12.70 500
SC295-1000 LIGHT GREEN M8 7.49 10.67 25.40 500
SC295 CLEAR M8 7.49 10.67 38.10 500
SC312 WHITE 7.92 11.18 25.40 500
SC312-1500 PINK 7.92 11.18 38.10 500
Te l :+44 (0 )1684 533800
CAPS 315°C
Material: Silicone Colour: See chart for colour coding
SAMPLES AVAILABLE
CAPS 315°C
Colour coded for ease of identification & sorting
Custom designs available
Manufactured from Ultrabake™ Silicone rubber to give long life
Can be used as a parallel plug to mask through holes
See pages 6-9 for lower temperature caps and silicone-free alternatives
Full technical information and MSDS available
MASKING CAPS 5
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C
SC340 BLACK 8.64 11.18 25.40 500
SC355 LIGHT GREEN 3/8-16 9.02 12.32 38.10 500
SC375-0500 PINK M10 9.53 12.83 12.70 500
SC375-0750 DARK BLUE M10 9.53 12.83 19.05 500
SC375 YELLOW M10 9.53 12.83 25.40 500
SC375-1500 GREY M10 9.53 12.83 38.10 500
SC406 LIGHT BLUE 7/16-14 10.31 13.49 25.40 500
SC437 BLACK 11.10 14.35 25.40 500
SC456-1000 PINK M12 11.58 14.76 25.40 500
SC456 CLEAR M12 11.58 14.76 38.10 500
SC456-2953 RUSTY RED M12 11.58 14.76 75.00 250
SC468 WHITE 11.89 15.06 25.40 500
SC480-1000 LIGHT GREY 1/2-13 12.19 15.37 25.40 500
SC480 PINK 1/2-13 12.19 15.37 38.10 500
SC500 LIGHT GREEN 12.70 15.88 38.10 500
SC535 YELLOW M14 13.59 16.13 38.10 250
SC535-3000 GREY M14 13.59 16.13 76.20 250
SC562 LIGHT BLUE M15 14.28 17.42 38.10 250
SC600 BLACK M16 5/8-11 15.24 18.39 38.10 250
SC625 CLEAR M17 15.88 19.05 38.10 250
SC625-2500 WHITE 15.88 19.05 63.50 250
SC687 PINK M18 17.45 20.63 38.10 250
SC730 LIGHT GREEN M19 18.54 21.72 38.10 250
SC750 YELLOW M20 19.05 22.23 38.10 250
SC750-3500 GREY M20 19.05 22.23 88.90 250
SC780 LIGHT BLUE 19.81 22.99 38.10 250
SC812 BLACK M22 20.63 23.80 38.10 250
SC875 CLEAR M24 22.23 25.40 38.10 250
SC937 WHITE 23.80 26.98 38.10 250
SC970 PINK M25 24.64 27.81 38.10 250
SC1000 LIGHT GREEN M27 25.40 28.58 38.10 250
SC1000-2000 YELLOW 25.40 28.58 50.80 250
SC1062 GREY 26.98 30.15 50.80 100
SC1125 LIGHT BLUE M30 28.58 31.75 38.10 100
SC1187 BLACK 30.15 33.33 38.10 100
SC1250 CLEAR 31.75 35.10 38.10 100
SC1350 WHITE 34.29 37.69 44.45 100
SC1390 CLEAR 35.31 38.51 50.80 100
SC1500 PINK 38.10 41.28 25.40 100
SC1500-1750 LIGHT GREEN 38.10 41.28 44.45 100
SC1750 YELLOW 44.45 47.63 50.80 100
SC1875 GREY 47.63 50.80 50.80 100
SC2000 LIGHT BLUE 50.80 53.98 50.80 100
www.green t ree-eng .co .uk
6 MASKING CAPS Te l :+44 (0 )1684 533800
FLEXIBLE VINYL ROUNDCAPS 260°C/177°C
Part NumberM
Size
Dimensions (mm) Packaging
High Temp260ºC
Low Temp177ºC A B REF C Carton
QuantityMini PackQuantity
HVC-054-10 VC-054-10 1.37 2.29 15.88 5000 n/aHVC-062-10 VC-062-10 1.57 3.05 15.88 5000 1000HVC-072-10 VC-072-10 M2 1.83 3.35 15.88 5000 n/aHVC-080-10 VC-080-10 2.03 3.56 15.88 5000 1000HVC-093-12 VC-093-12 M2.5 2.36 3.81 19.05 5000 1000
HVC-109-12 VC-109-12 M3 2.77 4.57 19.05 5000 1000HVC-125-8 VC-125-8 3.18 5.08 12.70 5000 n/aHVC-125-16 VC-125-16 3.18 5.08 25.40 5000 1000HVC-140-8 VC-140-8 3.56 5.33 12.70 5000 n/aHVC-140-16 VC-140-16 3.56 5.33 25.40 5000 1000
HVC-148-8 VC-148-8 M4 3.76 6.30 12.70 5000 n/aHVC-148-16 VC-148-16 M4 3.76 6.30 25.40 5000 n/aHVC-156-8 VC-156-8 3.96 6.10 12.70 5000 n/aHVC-156-16 VC-156-16 3.96 6.10 25.40 5000 1000HVC-172-8 VC-172-8 4.37 6.35 12.70 5000 n/a
HVC-172-16 VC-172-16 4.37 6.35 25.40 5000 1000HVC-180-8 VC-180-8 4.57 6.60 12.70 5000 n/aHVC-180-16 VC-180-16 4.57 6.60 25.40 5000 n/aHVC-187-8 VC-187-8 4.75 6.86 12.70 5000 n/aHVC-187-16 VC-187-16 M5 4.75 6.86 25.40 5000 1000
HVC-187-24 VC-187-24 4.75 6.86 38.10 4000 n/aHVC-203-8 VC-203-8 5.16 7.37 12.70 5000 n/aHVC-203-16 VC-203-16 5.16 7.37 25.40 5000 1000HVC-218-8 VC-218-8 5.54 7.87 12.70 5000 n/aHVC-218-16 VC-218-16 M6 5.54 7.87 25.40 5000 1000
HVC-224-8 VC-224-8 5.69 7.87 12.70 5000 n/aHVC-224-16 VC-224-16 5.69 7.87 25.40 4000 n/aHVC-234-8 VC-234-8 5.94 8.13 12.70 5000 n/aHVC-234-16 VC-234-16 5.94 8.13 25.40 5000 1000HVC-250-8 VC-250-8 6.35 8.89 12.70 5000 n/a
HVC-250-16 VC-250-16 6.35 8.89 25.40 5000 1000HVC-281-8 VC-281-8 7.14 9.65 12.70 5000 n/aHVC-281-16 VC-281-16 7.14 9.65 25.40 5000 1000HVC-290-8 VC-290-8 M8 7.37 10.16 12.70 5000 n/aHVC-290-16 VC-290-16 M8 7.37 10.16 25.40 5000 n/a
HVC-304-8 VC-304-8 7.72 10.41 12.70 5000 n/aHVC-304-16 VC-304-16 7.72 10.41 25.40 5000 n/aHVC-312-8 VC-312-8 7.93 10.67 12.70 5000 n/aHVC-312-16 VC-312-16 7.93 10.67 25.40 5000 1000HVC-312-24 VC-312-24 7.93 10.92 38.10 2500 n/a
HVC-343-8 VC-343-8 8.71 11.43 12.70 5000 n/aHVC-343-16 VC-343-16 8.71 11.43 25.40 2500 500HVC-375-8 VC-375-8 9.53 12.70 12.70 5000 n/aHVC-375-16 VC-375-16 M10 9.53 12.70 25.40 2500 500HVC-406-8 VC-406-8 10.31 13.46 12.70 5000 n/a
HVC-406-16 VC-406-16 10.31 13.46 25.40 2500 500HVC-437-8 VC-437-8 11.10 14.22 12.70 5000 n/aHVC-437-16 VC-437-16 M12 11.10 14.22 25.40 2500 500HVC-460-8 VC-460-8 11.68 14.73 12.70 5000 n/aHVC-460-16 VC-460-16 11.68 14.73 25.40 2500 n/a
Note: “B” dimension provided for reference only. measured approximately 6.35mm from open end of part.
Custom lengths available
Available with corrosion inhibitor, please call for details
Material: Flex500® or standard vinyl Colour: BlackOptional Colours Available
SAMPLES AVAILABLE
MASKING CAPS 7www.green t ree-eng .co .uk
FLEXIBLE VINYL ROUNDCAPS 260°C/177°C
Part Number M Size
Dimensions (mm) PackagingHigh Temp
260ºCLow Temp
177ºC A B REF C CartonQuantity
Mini PackQuantity
HVC-467-8 VC-467-8 11.86 14.73 12.70 5000 n/aHVC-467-16 VC-467-16 11.86 14.73 25.40 2500 n/aHVC-490-8 VC-490-8 12.45 15.49 12.70 5000 n/aHVC-490-16 VC-490-16 12.45 15.49 25.40 3000 n/aHVC-500-8 VC-500-8 12.70 15.75 12.70 5000 n/a
HVC-500-16 VC-500-16 12.70 15.75 25.40 2500 500HVC-531-8 VC-531-8 13.49 16.51 12.70 5000 n/aHVC-531-16 VC-531-16 M14 13.49 16.51 25.40 2500 n/aHVC-562-8 VC-562-8 14.28 17.53 12.70 2500 n/aHVC-562-16 VC-562-16 M15 14.28 17.53 25.40 2000 n/a
HVC-600-8 VC-600-8 M16 15.24 18.54 12.70 3000 n/aHVC-600-16 VC-600-16 M16 15.24 18.54 25.40 2000 n/aHVC-625-8 VC-625-8 15.88 19.30 12.70 2500 n/aHVC-625-16 VC-625-16 15.88 19.30 25.40 2000 400HVC-625-24 VC-625-24 15.88 19.56 38.10 1500 n/a
HVC-640-8 VC-640-8 16.26 19.56 12.70 4000 n/aHVC-640-16 VC-640-16 M17 16.26 19.56 25.40 2000 n/aHVC-665-8 VC-665-8 16.89 20.32 12.70 4000 n/aHVC-665-16 VC-665-16 16.89 20.32 25.40 2000 n/aHVC-687-8 VC-687-8 17.45 20.57 12.70 2500 n/a
HVC-687-16 VC-687-16 M18 17.45 20.57 25.40 1000 n/aHVC-690-8 VC-690-8 17.53 20.83 12.70 2500 n/aHVC-690-16 VC-690-16 17.53 20.83 25.40 1000 n/aHVC-725-8 VC-725-8 18.42 21.84 12.70 2500 n/aHVC-725-16 VC-725-16 18.42 21.84 25.40 1000 n/a
HVC-750-8 VC-750-8 M20 19.05 22.35 12.70 2500 n/aHVC-750-16 VC-750-16 M20 19.05 22.35 25.40 1000 200HVC-812-8 VC-812-8 20.63 23.88 12.70 2500 n/aHVC-812-16 VC-812-16 20.63 23.88 25.40 1000 n/aHVC-812-24 VC-812-24 20.63 24.13 38.10 1000 n/a
HVC-843-8 VC-843-8 21.41 24.89 12.70 2500 n/aHVC-843-16 VC-843-16 M22 21.41 24.89 25.40 1000 n/aHVC-870-8 VC-870-8 22.10 25.65 12.70 1000 n/aHVC-870-16 VC-870-16 22.10 25.65 25.40 1000 n/aHVC-875-8 VC-875-8 22.23 25.91 12.70 2500 n/a
HVC-875-16 VC-875-16 22.23 25.91 25.40 1000 200HVC-875-24 VC-875-24 22.23 25.91 38.10 1000 n/aHVC-937-8 VC-937-8 23.80 27.43 12.70 2000 n/aHVC-937-16 VC-937-16 M24/M25 23.80 27.43 25.40 1000 n/aHVC-985-8 VC-985-8 25.02 28.70 12.70 2000 n/a
HVC-985-16 VC-985-16 25.02 28.70 25.40 1000 n/aHVC-1000-8 VC-1000-8 25.40 28.96 12.70 1000 n/aHVC-1000-16 VC-1000-16 25.40 28.96 25.40 1000 200HVC-1000-24 VC-1000-24 25.40 28.96 38.10 1000 n/aHVC-1062-16 VC-1062-16 26.97 30.48 25.40 1200 n/a
HVC-1090-16 VC-1090-16 27.69 30.99 25.40 1200 n/aHVC-1125-16 VC-1125-16 28.57 32.26 25.40 500 n/aHVC-1187-16 VC-1187-16 30.14 33.78 25.40 500 n/aHVC-1250-16 VC-1250-16 31.75 35.31 25.40 500 n/aHVC-1250-24 VC-1250-24 31.75 35.31 38.10 500 n/a
Extremely flexible and durable
High and low temperature versions available
Material Flex 500® or standard vinyl
Ideal as thread protectors, dust and moisture seal and masking during surface coating operations
Custom lengths available
HVC - 260°C for short periods VC - 177°C for short periods
High temperature alternative to silicone
Continued
8 MASKING CAPS Te l :+44 (0 )1684 533800
FLEXIBLE VINYL ROUNDCAPS 260°C/177°C (CONTINUED)
Part Number Dimensions (mm) Packaging
High Temp260ºC
Low Temp177ºC A B REF C Carton
QuantityMini PackQuantity
HVC-1312-16 VC-1312-16 33.32 36.83 25.40 1000 n/aHVC-1312-24 VC-1312-24 33.32 36.83 38.10 600 n/aHVC-1375-16 VC-1375-16 34.92 38.61 25.40 500 n/aHVC-1375-24 VC-1375-24 34.92 38.61 38.10 400 n/aHVC-1437-16 VC-1437-16 36.50 40.06 25.40 750 n/a
HVC-1500-16 VC-1500-16 38.10 41.66 25.40 500 n/aHVC-1500-24 VC-1500-24 38.10 41.66 38.10 300 n/aHVC-1593-16 VC-1593-16 40.46 43.76 25.40 500 n/aHVC-1625-16 VC-1625-16 41.27 44.96 25.40 500 n/aHVC-1687-16 VC-1687-16 42.84 46.48 25.40 500 n/a
HVC-1750-16 VC-1750-16 44.45 48.01 25.40 500 n/aHVC-1812-16 VC-1812-16 46.02 49.58 25.40 1000 n/aHVC-1875-16 VC-1875-16 47.62 51.31 25.40 250 n/aHVC-1937-16 VC-1937-16 49.20 52.76 25.40 600 n/aHVC-2000-16 VC-2000-16 50.80 54.36 25.40 250 n/a
HVC-2000-24 VC-2000-24 50.80 54.36 38.10 300 n/aHVC-2125-16 VC-2125-16 53.98 57.79 25.40 500 n/aHVC-2156-16 VC-2156-16 54.76 58.57 25.40 500 n/aHVC-2250-16 VC-2250-16 57.15 60.96 25.40 500 n/aHVC-2250-24 VC-2250-24 57.15 60.96 38.10 300 n/a
HVC-2375-16 VC-2375-16 59.56 64.14 25.40 200 n/aHVC-2375-24 VC-2375-24 59.56 64.14 38.10 250 n/aHVC-2460-16 VC-2460-16 62.48 66.29 25.40 250 n/aHVC-2500-16 VC-2500-16 63.50 67.31 25.40 400 n/aHVC-2500-24 VC-2500-24 63.50 67.31 38.10 250 n/a
HVC-2625-16 VC-2625-16 66.67 70.49 25.40 400 n/aHVC-2625-24 VC-2625-24 66.67 70.49 38.10 200 n/aHVC-2687-16 VC-2687-16 68.25 72.31 25.40 400 n/aHVC-2750-16 VC-2750-16 69.85 73.91 25.40 300 n/aHVC-2750-24 VC-2750-24 69.85 73.91 38.10 200 n/a
HVC-2875-16 VC-2875-16 73.03 77.09 25.40 250 n/aHVC-3000-16 VC-3000-16 76.20 80.26 25.40 250 n/aHVC-3000-24 VC-3000-24 76.20 80.26 38.10 250 n/aHVC-3125-16 VC-3125-16 79.37 83.44 25.40 250 n/aHVC-3125-24 VC-3125-24 79.37 83.44 38.10 300 n/a
HVC-3250-18 VC-3250-18 82.55 86.61 28.58 200 n/aHVC-3375-18 VC-3375-18 85.73 89.79 28.58 250 n/aHVC-3500-18 VC-3500-18 88.90 92.96 28.58 225 n/aHVC-3500-24 VC-3500-24 88.90 92.96 38.10 200 n/aHVC-3625-18 VC-3625-18 92.08 96.14 28.58 200 n/a
HVC-3750-18 VC-3750-18 92.25 99.31 28.58 200 n/aHVC-3875-18 VC-3875-18 98.43 102.49 28.58 200 n/aHVC-4000-20 VC-4000-20 101.60 105.66 31.75 100 n/aHVC-4125-20 VC-4125-20 104.78 108.84 31.75 150 n/aHVC-4187-20 VC-4187-20 106.35 110.41 31.75 100 n/a
HVC-4250-20 VC-4250-20 107.95 112.01 31.75 150 n/aHVC-4375-20 VC-4375-20 111.13 115.19 31.75 150 n/aHVC-4500-20 VC-4500-20 114.30 118.36 31.75 150 n/aHVC-4750-20 VC-4750-20 120.65 124.71 31.75 100 n/aHVC-5000-22 VC-5000-22 127.00 131.57 34.93 125 n/a
Note: “B” dimension provided for reference only. measured approximately 6.35mm from open end of part.
Custom lengths available
Available with corrosion inhibitor, please call for details
SAMPLES AVAILABLE
MASKING CAPS 9www.green t ree-eng .co .uk
Part Number Dimensions (mm) PackagingHigh Temp
260ºCLow Temp
177ºC A B REF C CartonQuantity
Mini PackQuantity
HVC-5187-22 VC-5187-22 131.75 136.32 34.93 125 n/aHVC-5375-22 VC-5375-22 136.53 141.10 34.93 100 n/aHVC-5500-22 VC-5500-22 139.70 144.27 34.93 100 n/aHVC-5750-22 VC-5750-22 146.05 150.62 34.93 50 n/aHVC-6000-24 VC-6000-24 152.40 156.97 38.10 90 n/a
HVC-6250-24 VC-6250-24 158.75 163.32 38.10 90 n/aHVC-6500-24 VC-6500-24 165.10 169.67 38.10 80 n/aHVC-6750-24 VC-6750-24 171.45 176.02 38.10 70 n/aHVC-7000-24 VC-7000-24 177.80 182.37 38.10 50 n/aHVC-7250-24 VC-7250-24 184.15 188.72 38.10 70 n/a
HVC-7500-24 VC-7500-24 190.50 195.07 38.10 50 n/aHVC-7750-28 VC-7750-28 196.85 201.42 44.45 50 n/aHVC-8000-28 VC-8000-28 203.20 207.77 44.45 50 n/aHVC-8500-28 VC-8500-28 215.90 220.47 44.45 50 n/aHVC-8750-28 VC-8750-28 222.25 226.82 44.45 50 n/a
HVC-9000-28 VC-9000-28 228.60 233.68 44.45 40 n/aHVC-9250-28 VC-9250-28 234.95 240.03 44.45 40 n/aHVC-9375-28 VC-9375-28 238.13 243.21 44.45 40 n/aHVC-9500-28 VC-9500-28 241.30 246.38 44.45 40 n/aHVC-9625-28 VC-9625-28 244.48 249.56 44.45 40 n/a
HVC-9875-28 VC-9875-28 250.83 255.91 44.45 40 n/aHVC-10000-32 VC-10000-32 254.00 259.08 50.80 35 n/aHVC-10312-32 VC-10312-32 261.92 267.00 50.80 25 n/aHVC-10750-32 VC-10750-32 273.05 278.13 50.80 25 n/aHVC-11000-32 VC-11000-32 279.40 284.48 50.80 25 n/a
HVC-11375-32 VC-11375-32 288.93 294.01 50.80 25 n/aHVC-11750-32 VC-11750-32 298.45 303.53 50.80 25 n/aHVC-12000-32 VC-12000-32 304.80 309.88 50.80 25 n/aHVC-12250-32 VC-12250-32 311.15 316.23 50.80 25 n/aHVC-12500-32 VC-12500-32 317.50 322.58 50.80 25 n/a
HVC-12625-32 VC-12625-32 320.68 325.76 50.80 25 n/aHVC-12875-32 VC-12875-32 327.03 332.11 50.80 25 n/aHVC-13250-32 VC-13250-32 336.55 342.14 50.80 25 n/aHVC-13500-32 VC-13500-32 342.90 348.49 50.80 25 n/aHVC-13600-32 VC-13600-32 345.44 351.03 50.80 25 n/a
HVC-14000-32 VC-14000-32 355.60 361.19 50.80 18 n/aHVC-14250-32 VC-14250-32 361.95 367.54 50.80 25 n/aHVC-14500-32 VC-14500-32 368.30 373.89 50.80 25 n/aHVC-15000-32 VC-15000-32 381.00 386.59 50.80 25 n/aHVC-15625-32 VC-15625-32 396.88 402.46 50.80 25 n/a
HVC-15875-32 VC-15875-32 403.23 409.32 50.80 25 n/aHVC-16000-32 VC-16000-32 406.40 412.50 50.80 25 n/aHVC-16500-32 VC-16500-32 419.10 425.20 50.80 20 n/aHVC-17375-40 VC-17375-40 441.33 447.42 63.50 20 n/aHVC-18000-40 VC-18000-40 457.20 463.30 63.50 15 n/a
HVC-19000-40 VC-19000-40 482.60 488.70 63.50 15 n/aHVC-20000-40 VC-20000-40 508.00 514.10 63.50 15 n/aHVC-21000-40 VC-21000-40 533.40 539.50 63.50 15 n/aHVC-24000-48 VC-24000-48 609.60 615.70 76.20 15 n/a
FLEXIBLE VINYL ROUNDCAPS 260°C/177°C
Extremely flexible and durable
High and low temperature versions available
Material Flex 500® or standard vinyl
Ideal as thread protectors, dust and moisture seal and masking during surface coating operations
Custom lengths available
HVC - 260°C for short periods VC - 177°C for short periods
High temperature alternative to silicone
10 MASKING CAPS Te l :+44 (0 )1684 533800
Part Number
Dimensions (mm) Packaging
A B C D E F CartonQuantity
Mini PackQuantity
TS-00 2.95 4.62 1.35 3.05 9.65 8.38 5000 1000TS-0 4.39 6.1 2.82 4.5 9.65 10.16 5000 1000TS-1 6.1 7.49 4.42 6.1 9.65 11.68 5000 1000TS-2 7.59 9.27 5.97 7.67 9.65 13.21 5000 1000TS-3 9.17 10.62 7.57 9.27 9.65 14.73 5000 1000
TS-4 10.64 12.32 9.04 10.72 9.65 16.51 5000 1000TS-5 11.96 13.61 10.39 12.32 11.18 18.03 5000 1000TS-6 13.51 15.44 11.89 13.84 11.18 19.56 5000 1000TS-7 14.73 16.94 13.16 15.37 12.7 21.08 5000 1000TS-8 16.26 18.47 14.68 16.87 12.7 22.86 5000 1000
TS-9 17.53 20.02 15.95 18.44 14.22 24.38 5000 1000TS-10 19.05 21.54 17.45 19.94 14.22 25.91 5000 1000TS-11 20.37 23.14 18.8 21.56 16 27.43 5000 1000TS-12 22 24.77 20.4 23.16 16 29.21 5000 1000TS-13 24.49 27.69 22.89 26.09 19.05 32.26 2500 500
TS-14 27.79 30.86 26.19 29.26 19.05 36.32 2500 500TS-15 31.09 34.42 29.49 32.82 19.05 38.61 2500 500TS-16 33.32 37.21 31.72 35.61 22.35 41.91 1000 200TS-17 36.75 40.64 35.15 39.04 22.35 44.96 1000 200TS-18 39.62 42.72 38.05 41.15 19.05 48.26 1000 200
TS-19 44.45 47.75 42.88 46.18 25.4 51.31 1000 200TS-20 45.21 49.53 43.64 47.96 25.4 54.61 1000 200TS-21 48.26 52.73 46.66 51.13 25.4 57.66 1000 200TS-23 51.69 56.13 50.19 54.69 25.4 59.94 1000 200TS-24 57.28 61.72 55.78 60.27 25.4 65.53 1000 200
TS-42 64.14 68.58 62.64 67.13 25.4 72.39 1000 200TS-46 70.23 74.68 68.73 73.23 25.4 78.49 1000 200
TAPERED SILICONE CAP/PLUG 315°C
Flexible and durable material Easy to install and remove Reusable Ideal for applications requiring
temperature and corrosion resistance
Colours: Red - 70° shore Natural - 45° shore
Suitable for powder coating Vented versions available Can be used as both a cap and plug Recommended for powder coating,
e-coating, plating, anodising & spray painting
SILICONE FLANGE CAP 315°C
Part NumberDimensions (mm) Packaging
A B CartonQuantity
Mini PackQuantity
SFC-157-19 3.99 29.97 500 100SFC-187-22 4.75 34.98 500 100SFC-234-32 5.94 50.80 500 100SFC-294-21 7.47 33.78 500 100SFC-315-16 8.00 24.74 250 50SFC-375-23 9.53 36.09 100 20SFC-438-15 11.13 24.13 100 20SFC-608-19 15.44 29.97 100 20
Simplifies application and removal Internal lip on the open end
provides a positive seal to prevent paint or other contaminants seeping onto the part
Material: Silicone Colour: Red and Natural
Material: Silicone Colour: Natural
SAMPLES AVAILABLE
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C D
WC125-0500 CLEAR 6-32 12.70 3.18 6.60 25.40 500
WC156-0500 CLEAR 8-32 12.70 3.96 8.13 25.40 500
WC172-0500 CLEAR 10-24 12.70 4.37 9.78 25.40 500
WC027-012 LIGHT GREEN M3 4-40 11.99 2.69 6.20 25.40 500
WC037-012 PINK M4 11.99 3.71 6.71 25.40 500
WC046-015 CLEAR M5 15.01 4.60 8.20 25.40 500
WC056-015 RED M6 1/4-20 15.01 5.59 8.71 25.40 500
WC075-018 BLACK M8 5/16-18 18.01 7.49 10.69 25.40 250
WC095-018 YELLOW M10 7/16-14 20.83 9.50 12.70 38.1 250
WC115-025 CLEAR M12 1/2-13 24.99 11.51 16.69 38.1 250
WC155-031 PURPLE M16 5/8-11 30.99 15.49 20.70 38.1 250
WC195-038 GREY M20 38.00 19.51 24.69 38.1 250
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
UVCP234 YELLOW 5.94 11.43 25.40 250
UVCP355 GREEN 9.02 14.35 38.10 250
UVCP500 BLUE 12.70 19.05 38.10 100
UVCP1000 RUSTY RED 25.40 31.75 38.10 50
Recommended for powder coating, e-coating, plating and anodising
Provides a concentric mask around a stud or hole paint free earthing area
May be used as a cap or plug
Material: Silicone Colour: See chart for colour coding
MASKING CAPS 11
Fits over studs and tube ends
Unique vented design eliminates blow off through expansion
Oversize flanged head aids masking and removal
www.green t ree-eng .co .uk
WASHER CAPS 315°C
VENTING CAP-PLUGS 315°C
Can also be used as a cap or plug
Allows for venting by puncturing, slitting or removing the nipple on the top of the cap
Material: Silicone Colour: See chart for colour coding
Special rectangular cap used for powder coating, e-coating, plating and anodising
Ideal for masking earthing tabs
Chamfered leading edge to eliminate paint build up
12 MASKING CAPS
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
SRC-1 CLEAR 6.30 10.01 0.76 1000SRC-2 RUSTY RED 6.30 11.58 0.76 1000SRC-3 CLEAR 11.94 9.58 1.02 1000SRC-4 YELLOW 11.68 7.11 0.89 1000SRC-5 PINK 12.45 17.45 1.19 1000
SPADE TERMINAL CAPS 315°C
Te l :+44 (0 )1684 533800
FLEXIBLE TEAR-TAB CAPS 260°C
Part NumberDimensions (mm) Packaging
A B C CartonQuantity
Mini PackQuantity
HJS-582L 14.15 15.34 33.78 3000 600HJS-625L 15.47 15.27 31.50 4000 800
Ergonomically friendly with a soft, flexible feel and a finger grip Caps maintain their flexibility after masking processes giving you the
option of removing after processing, or leaving on as shipping protection Ideal for masking applications during painting plating and powder
coating operationsMaterial: Flex500® Colour: Black
HIGH TEMPERATURE RIBBED CAPS 260°C
Part NumberDimensions (mm) Packaging
A B C CartonQuantity
Mini PackQuantity
HCR-320-20 7.04 8.13 32.51 5000 1000HCR-450-32 10.46 11.43 51.56 2000 400HCR-580-32 13.72 14.73 52.32 1000 200HCR-510-18 11.94 12.95 31.24 2000 400HCR-700-32 16.76 17.78 54.10 1000 200HCR-375-8 10.26 13.21 12.70 5000 1000HCR-375-14 10.26 13.21 21.84 5000 1000HCR-820-32 19.81 20.83 54.10 500 100HCR-1060-44 25.78 26.92 71.37 300 60HCR-1330-44 32.64 33.78 69.85 300 60HCR-1510-44 37.69 38.35 69.85 300 60HCR-1630-48 39.63 41.40 77.72 300 60
Exterior ribs to aid removal and installation
A slightly flared open- end allows them to be easily pushed onto the application
Material: Silicone Colour: See chart for colour coding
Material: Flex500® Colour: Black
SAMPLES AVAILABLE
PLUGS 13
PLUG SELECTOR GUIDE
www.green t ree-eng .co .uk
Description Fits Hole Size (mm) Page
From To
Tapered Plugsover 50 different sizes
0.79 127.00 14/15 & 17
Tapered Plugs with HandleHandle provides extra grip during installation and removal
0.79 55.96 15
Hollow Cone PlugsIdeal for slotted and oval holes
3.74 19.99 16
Mouse Tail PlugsFor very small holes
0.64 2.03 16
Thread Mask PlugsMasks the first thread of a threaded hole
2.72 22.76 18
Flexible Tapered plugsProvides a snug but flexible fit when pushed into open ports
4.95 32.39 18
Flangeless PlugsProtects the thread of a blind hole
3.99 31.90 19
Pull PlugsMasks the length of a through hole
1.57 35.05 20/21
Pipe Thread Mask PlugMasks internally threaded ends of tubing
18.31 83.66 22
Hollow Flanged Pull PlugsProtects the chamfer of threaded through holes
5.00 17.15 22
Dual Flanged Pull PlugsIdeal for weld nuts
5.00 16.99 22
Multi Flanged PlugsOne size fits a multitude of holes
4.00 18.00 23
Washer Pull PlugsProvides a paint free area around holes
2.67 11.66 23
Tapered Vinyl PlugsTapered design for plugging small holes
1.78 8.64 24
Dual Purpose Washer PlugsDouble use, provides paint free area around a hole
2.44 12.70 24
Hollow Washer PlugsFor masking the earthing area around the hole
6.30 22.00 25
Flanged PlugsMasks a hole and first thread
7.39 13.69 25
Step PlugsProvides paint free area around a hole
3.00 8.23 26
Hardy PlugsMasks a thread and counterbore
5.60 11.00 26
Double Washer PlugsFor masking simultaneously entry/exit threads on weld nuts/press nuts etc
M4 M16 27
Self Threading PlugsSelf tapping leak proof seal
1.52 11.34 27
Custom PlugsMaterial temperatures up to 315ºC and designs to suit your application
28/29
Please also see inside back cover for ‘Plugs for Threaded Holes’ sizing chart.
Recommended for powder coating, e-coating, plating and anodising
Plugs threaded or non-threaded through and blind holes
Colour coding increases visibility and eases the job of sorting the plugs after use
Reusable
Extra long MPP range can be used to mask a range of sizes
14 PLUGS
Colour Solid PlugPart No.
Hollow PlugPart No.
Plug with HandlePart No.
Quantity Per Bag
CLEAR UP99-04 UP99-H 1000
BLUE M27860-01 500
DARK GREEN MSP101L 1000
LIGHT GREEN UP100-04 UP100-H 1000
PINK UP101-04 UP101-H 1000
BLACK UP102-04 UP102-H 1000
YELLOW MSP102L 1000
CLEAR MPP-UB 500
CLEAR MPP-SP 500
CLEAR MSP103L 1000
DARK RED UP103-04 UP103-H 1000
WHITE UP105-04 UP105-H 100
YELLOW UP104-04 UP104-H 100
RED MSP104L 1000
WHITE MSP105L 500
CLEAR UP000-04 100
PURPLE UP00-04 UP00-H 100
PINK MSP106L 500
LIGHT GREEN UP108-04 UP108-H 100
PINK UP0-04 UP0-H 100
CLEAR MSP107L 250
BLACK UP1-04 100
RED UP2-04 UP2-H 100
CLEAR MSP108L 250
YELLOW UP3-04 UP3-H 100
CLEAR MSP109L 250
CLEAR UP4-04 UP4-H 100
LIGHT GREEN UP5-04 HUP5-04 HUP5-H 100
PINK HUP5.5-04 100
DARK GREEN UP6-04 HUP6-04 HUP6-H 100
YELLOW HUP6.5-04 100
LIGHT BLUE UP7-04 (50) HUP7-04† HUP7-H† (50) 50/100
WHITE HUP7.5-04 (100) 100
CLEAR UP8-04 (25) HUP8-04* (100) 25/100
PINK HUP 8.5-04 100
RED UP9-04 (25) HUP9-04 (100) 25/100
DARK GREEN HUP9.5-04 50
CLEAR UP10-04 (25) HUP10-04 (50) HUP10-H (25) 25/50
YELLOW HUP10.5-04 50
DARK BLUE UP11-04 (25) HUP11-04 (50) HUP11-H (25) 25/50
DARK GREEN HUP11.5-04 50
RED UP12-04 (25) HUP12-04 (50) 25/50
LIGHT BLUE HUP13-04 50
PURPLE HUP13.5-04 50
LIGHT GREEN HUP13.7-04 10
WHITE HUP14-04 10
RUSTY RED HUP15-04 10
CLEAR HUP16-04 5
† Dark Blue*Light Blue
SOLID TAPERED PLUGS
HIGH TEMPERATURE ULTRABAKE PLUGS
Te l :+44 (0 )1684 533800
HIGH TEMPERATURE PLUGS 315°C
Material: Silicone Colour: See chart for colour coding
SAMPLES AVAILABLE
PLUGS 15
Dimensions (mm)Top A
Bottom B
Length C D E
Handle Length F
0.79 3.18 15.88 9.52
1.50 7.00 57.00
1.58 4.75 19.05
1.60 3.18 15.88 9.52
1.60 4.78 15.88 12.82
3.18 6.35 19.05 12.70
3.18 6.35 25.40
3.18 9.53 31.75
3.18 12.70 50.80
4.75 8.71 25.40
4.78 8.74 15.88 12.82
6.35 9.53 12.70 12.70
6.35 9.53 19.05 12.70
6.35 11.10 25.40
8.03 14.15 25.40
8.74 12.70 20.65
10.31 15.09 25.40 19.05
11.10 17.45 25.40
11.13 15.88 22.23 19.05
12.70 16.66 25.40 19.05
14.28 19.05 25.40
14.30 19.05 25.40
15.88 19.84 25.40 19.05
15.88 20.32 25.40
18.26 23.83 25.40 19.05
19.05 23.50 25.40
19.05 25.40 25.40 19.05
23.01 27.00 25.40 10.31 19.05 19.05
24.36 28.17 25.40 11.94 17.78
26.19 31.75 25.40 13.49 19.05 19.05
28.58 34.14 25.40 15.24 19.05
30.18 36.53 25.40 13.49 19.05 19.05
30.15 38.10 25.40 17.27 19.05
33.35 41.28 25.40 20.65 19.05
35.71 42.88 25.40 22.86 19.05
37.31 44.45 25.40 24.61 19.05
38.10 46.05 25.40 25.40 19.05
41.28 50.01 25.40 28.58 19.05 19.05
44.45 52.83 25.40 30.48 19.05
47.63 55.96 25.40 34.93 19.05 19.05
50.80 62.71 25.40 31.75 15.88
54.00 63.50 25.40 34.93 15.88
57.94 68.25 25.40 38.89 15.88
61.90 75.00 34.93 42.85 25.40
68.00 81.99 38.10 42.60 25.40
76.20 88.90 38.10 50.80 25.40
82.50 101.00 38.10 57.15 25.40
88.90 127.00 50.80 63.50 38.10
More flexible than solid plugs and therefore easier to insert
Conformable
Significant savings over traditional tapered plugs
TAPERED PLUG WITH HANDLE
HOLLOW TAPERED PLUG
Excellent sealing power and rugged durability ensure quality results over repeated usage
Handle gives better grip during installation and removal
HIGH TEMPERATURE PLUGS 315°C
www.green t ree-eng .co .uk
16 PLUGS
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
UHCP-1 RUSTY RED 14.73 3.74 48.26 250
UHCP-2 BLUE 19.99 10.01 73.66 100
Recommended for powder coating, e-coating, anodising and plating
Ideal for slotted and oval holes
Hollow configuration and tapered design makes this plug highly versatile for irregular holes
Reusable
Material: Silicone Colour: See chart for colour coding
Part Number
Dimensions (mm) Material Quantity Per Bag
A B C D
SMT100 50.80 2.03 12.70 0.64 Ultrabake™ (315º) 500
MT100 50.80 2.03 12.70 0.64 EPDM (177º) 500
Recommended for powder coating, e-coating, anodising and plating
Ideal for small hard to reach holes
Stretches to provide leakproof seal
Reusable
Choice of materials
Great resistance to chemicals
Te l :+44 (0 )1684 533800
MOUSE TAIL PLUGS315°C/177°C
HOLLOW CONE PLUGS 315°C
Material: Silicone or EPDMColour: Clear
SAMPLES AVAILABLE
Recommended for painting, plating, anodising and shot blasting
Available in black and green (carbon free) neoprene
Reusable
They offer thermal stability, good physical strength, good rigidity, excellent abrasion resistance, high resilience with low compression set and resistance to UV radiation.
Custom designs available
See pages 14 -15 for higher temperature plugs.
PLUGS 17
Part Number
Part Number
Dimensions (mm) Quantity Per Bag
A B C
GN99 BN99 0.79 3.18 15.88 1000
GN100 BN100 1.59 3.18 15.88 1000
GN101 BN101 1.59 4.76 15.88 1000
M27860-01 1.50 7.00 57.00 500
GN102 BN102 3.18 6.35 19.05 1000
MPP-GN 3.18 12.70 50.80 500
GN103 BN103 4.76 8.73 15.88 1000
GN104 BN104 6.35 9.53 19.05 1000
GN105 BN105 6.35 9.53 12.70 100
GN106 BN106 8.73 11.11 17.46 100
GN000 BN000 8.73 12.70 20.64 100
GN107 BN107 8.13 14.29 25.40 100
GN00 BN00 10.32 15.08 25.40 100
GN108 BN108 11.11 15.88 20.64 100
GN109 BN109 12.70 16.67 25.40 100
GN110 BN110 14.29 19.05 25.40 100
GN111 BN111 15.88 19.84 25.40 100
GN112 BN112 18.26 23.81 25.40 100
GN114 BN114 19.05 25.40 25.40 100
GN116 BN116 23.02 26.99 25.40 100
GN118 BN118 26.19 31.75 25.40 100
GN120 BN120 30.16 36.51 25.40 100
GN122 BN122 33.34 41.28 25.40 50
GN124 BN124 37.31 44.45 25.40 50
GN126 BN126 41.28 50.01 25.40 50
GN128 BN128 47.63 55.96 25.40 25
GN129 BN129 50.80 62.71 25.40 25
GN130 BN130 53.98 63.50 25.40 25
GN132 BN132 57.94 68.26 25.40 25
GN133 BN133 61.91 75.01 37.31 1
GN134 BN134 76.20 88.90 38.10 1
GN136 BN136 82.55 101.60 38.10 1
GN138 BN138 88.90 127.00 50.80 1
NEOPRENE TAPERED PLUGS177°C
www.green t ree-eng .co .uk
18 MASKING SPECIALITY PLUGS
THREAD MASK PLUGS 315°C
Te l :+44 (0 )1684 533800
Recommended for powder coating, e-coating, plating and anodising
Designed to mask the first thread of a threaded hole
Sizes for metric and UNC threads Hollow design to improve fit
Part Number
Colour Dimensions (mm) Quantity Per BagA B C D
UTM-M3*0.5LS RED 2.72 5.33 20.83 3.51 1000
UTM-M4*0.7LS PINK 3.58 5.84 21.84 4.09 1000
UTM-M5*0.8LS PURPLE 4.52 5.59 20.83 5.26 500
UTM-M6*1 CLEAR 5.28 5.00 14.00 6.30 500
UTM-M6*1LS CLEAR 5.28 7.49 24.49 6.30 500
UTM-1/4-20 YELLOW 5.54 5.08 11.43 6.60 500
UTM-1/4-20LS YELLOW 5.54 7.09 23.42 6.60 500
UTM-1/4-36LS DARK BLUE 5.89 6.86 23.42 6.60 500
UTM-5/16-18 LIGHT GREEN 7.06 5.08 12.70 8.13 500
UTM-5/16-18LS LIGHT GREEN 7.06 7.09 22.71 8.13 500
UTM-M8*1.25 DARK BLUE 7.19 5.00 12.24 8.41 500
UTM-M8*1.25LS DARK BLUE 7.19 7.49 22.76 8.41 500
UTM-5/16-40LS RUSTY RED 7.52 7.09 22.71 8.13 250
UTM-3/8-16 WHITE 8.53 6.35 15.24 9.78 500
UTM-3/8-16LS WHITE 8.53 8.36 25.25 9.78 250
UTM-3/8-36LS YELLOW 9.07 8.36 25.25 9.78 250
UTM-M10*1.5 PINK 9.09 7.01 16.00 10.39 250
UTM-M10*1.5LS PINK 9.09 7.01 24.00 10.39 250
UTM-7/16-14 PINK 9.96 8.89 19.05 11.18 250
UTM-M12*1.75 RUSTY RED 10.82 8.79 20.12 12.42 250
UTM-1/2-13 CLEAR 11.46 8.89 19.05 12.95 250
UTM-M16*2 LIGHT GREEN 14.81 11.00 23.01 16.61 100
UTM-M20*2.5 YELLOW 18.39 13.00 28.50 20.60 100
UTM-M24*2LS GREY 22.76 16.00 37.85 24.05 50
LS (Long Series) have longer handles for harder to reach areas
Longer sealing area Reusable Ideal for shallowblind holes, weld nuts Tapered to ease insertion
FLEXIBLE TAPERED PLUGS
Part Number Dimensions (mm) CartonQuantity
Mini Pack
QuantityHigh Temp 260°C 177°C A B C
HVTP-05 VTP-05 4.95 3.18 7.62 5000 100
HVTP-1 VTP-05 7.37 5.33 10.31 5000 100
HVTP-2 VTP-05 10.06 7.37 11.10 5000 100
HVTP-25 VTP-25 11.30 8.64 12.70 5000 100
HVTP-3 VTP-3 13.46 9.27 14.10 5000 100
HVTP-35 VTP-35 14.48 11.30 15.88 2500 50
HVTP-4 VTP-4 16.26 13.21 19.05 2500 50
HVTP-5 VTP-5 20.32 17.32 23.80 2500 50
HVTP-55 VTP-55 22.10 18.59 25.40 1000 25
HVTP-6 VTP-6 28.04 22.63 30.18 1000 25
HVTP-7 VTP-7 32.39 29.13 36.91 1000 25
Provides a snug fit when pushed into open ports, ensuring a tight closure
A simple tug on the flanged lip of an installed tapered plug breaks the seal for easy removalMaterial: Flex500® or standard vinyl Colour: Black (HVTP), Red (VTP)
Material: Silicone Colour: See chart for colour coding
SAMPLES AVAILABLE
MASKING SPECIALITY PLUGS 19
Recommended for powder coating, e-coating, plating and anodising
Designed to protect threaded holes without masking the surrounding area
The shallow tapered design and hollow core allows a single plug to be used for different sized holes
Colour coding increases visibility and eases the job of sorting the plugs after use
Material: Silicone Colour: See chart for colour coding
Part Number
Colour Dimensions (mm) Quantity Per BagA B C
UFP00250 CLEAR 3.99 5.84 25.40 250
UFP00312 BLACK 5.61 8.00 25.40 250
UFP00406 YELLOW 8.00 9.65 25.40 250
UFP00468 CLEAR 9.65 11.94 25.40 250
UFP00562 LIGHT BLUE 12.19 14.61 25.40 250
UFP00625 PURPLE 13.61 16.00 25.40 250
UFP00718 RUSTY RED 16.00 18.01 25.40 250
UFP00787 LIGHT GREEN 18.01 19.99 25.40 100
UFP00866 GREY 19.99 22.00 25.40 100
UFP00945 CLEAR 22.00 24.00 25.40 100
UFP01024 BLACK 24.00 26.01 25.40 100
UFP01102 DARK GREEN 26.01 27.99 25.40 100
UFP01134 PURPLE 27.00 29.13 25.40 50
UFP01178 LIGHT BLUE 27.99 30.00 25.40 50
UFP01216 RUSTY RED 29.01 30.99 25.40 50
UFP01234 YELLOW 30.00 31.90 25.40 50
Part Number
Dimensions (mm) Quantity Per Bag
A B CFP00250 3.99 5.84 25.40 250
FP00312 5.61 8.00 25.40 250
FP00406 8.00 9.65 25.40 250
FP00468 9.65 11.94 25.40 250
FP00562 12.19 14.61 25.40 250
FP00625 13.61 16.00 25.40 250
FP00718 16.00 18.01 25.40 250
FP00787 18.01 19.99 25.40 100
FP00866 19.99 22.00 25.40 100
FP00945 22.00 24.00 25.40 100
FP01024 24.00 26.01 25.40 100
FP01102 26.00 27.99 25.40 100
Recommended for plating, anodising and spray-painting
Tapered shallow design and hollow core allows multiple applications
Protect plain or threaded holes without masking the surrounding area
Chemical resistance - suitable for use with oil and lubricants
Excellent sealing characteristics eliminate ingress
For A,B & C reference, please see diagram above.
FLANGELESS PLUGS 315°C
NITRILE FLANGELESS PLUGS121°C
www.green t ree-eng .co .uk
Material: Nitrile-Butadiene Rubber Colour: Black
20 MASKING SPECIALITY PLUGS
Recommended for painting, plating, anodising and shot blasting
Plug threaded or non-threaded parallel through holes
Reusable
Colour black
Custom designs available
Long handles aiding insertion and removal
Oversized to eliminate ingress
Material: E.P.D.MColour: Black
EPDM PULL PLUGS 177ºCPart Number
Dimensions (mm)
A B C D
PP06 1.57 1.17 8.56 9.53
PP07 1.70 1.19 15.49 15.88
PP08 1.85 1.17 14.99 15.55
PP09 2.31 1.32 15.88 15.88
PP10 2.36 1.27 17.78 17.78
PP11 2.64 1.58 15.88 13.34
PP11A 3.18 1.58 15.88 15.88
PP14 3.30 2.36 25.40 25.40
PP15 3.30 2.36 17.78 16.51
PP17 3.61 2.16 14.17 15.88
PP18 3.91 2.11 15.88 16.05
PP20 3.96 1.58 19.05 15.88
PP22 4.12 2.44 14.76 15.88
PP23 4.95 2.79 15.88 15.88
PP30 5.54 3.30 25.40 25.40
PP33 5.72 3.18 25.40 25.40
PP37 6.53 3.30 25.40 25.40
PP40 6.99 3.18 23.37 23.80
PP40LS 6.99 3.71 50.80 50.80
PP42 8.03 3.86 23.11 25.40
PP42A 8.46 6.38 27.94 19.23
PP43 8.51 3.89 25.40 25.40
PP50 8.89 4.90 23.50 22.38
PP55 9.75 3.91 25.40 25.40
PP55LS 9.75 5.18 50.80 50.80
PP60 10.36 4.85 25.40 25.60
PP66 11.28 6.48 25.15 25.40
PP67 11.30 6.48 25.40 25.40
PP70 11.99 6.17 25.40 25.40
PP73 12.60 6.35 25.40 25.40
PP73LS 12.60 6.68 50.80 50.80
PP77 12.95 6.50 24.28 25.40
PP80 13.46 6.35 25.40 25.40
PP85 14.50 7.70 25.43 25.40
PP89 15.55 6.35 25.40 25.40
PP89LS 15.55 8.26 50.80 50.80
PP90 16.26 9.53 25.40 25.40
PP95 17.96 9.53 33.68 31.75
PP95LS 17.96 9.53 50.80 50.80
PP97 18.49 9.53 27.94 28.58
PP100 19.56 9.53 23.55 25.40
PP100LS 19.56 10.36 50.80 50.80
PP105 20.50 10.87 31.75 31.75
PP110 22.56 9.45 25.40 25.40
PP120 25.91 9.53 24.64 25.40
PP140 35.05 18.59 38.10 38.10
E.P.D.M. PULL PLUGS 177°C
Te l :+44 (0 )1684 533800SAMPLES AVAILABLE
MASKING SPECIALITY PLUGS 21
315ºCHole Fit Thread Quantity
Per Bag
1/20 500
1/16 500
1/16 M2 500
5/64 500
5/64 500
3/32 M3 500
7/64 500
1/8 500
1/8 500
1/8 M4 500
9/64 500
9/64 500
5/32 500
11/64 M5 500
3/16 M6 500
7/32 500
1/4 500
17/64 M8 500
17/64 M8 500
19/64 500
5/16 500
5/16 500
11/32 500
3/8 M10 250/500
3/8 M10 250/500
13/32 250/500
7/16 M12 250/500
7/16 250/500
29/64 250/500
15/32 250/500
15/32 500
1/2 250/500
33/64 M14 250/500
37/64 M15 250/500
19/32 M16 250/500
19/32 250
5/8 M17 100
13/16 M18 100
13/16 100
23/32 100
3/4 M20 100
3/4 M20 100
25/32 M24 100
7/8 100
1 M27 100
1-3/8 50
Part Number
Colour
SPP06 CLEAR
SPP07 PINK
SPP08 LIGHT GREEN
SPP09 YELLOW
SPP10 GREY
SPP11 LIGHT BLUE
SPP11A WHITE
SPP14 CLEAR
SPP15 PINK
SPP17 LIGHT GREEN
SPP18 YELLOW
SPP20 GREY
SPP22 LIGHT BLUE
SPP23 WHITE
SPP30 CLEAR
SPP33 PINK
SPP37 LIGHT GREEN
SPP40 YELLOW
SPP40LS WHITE
SPP42 GREY
SPP42A LIGHT BLUE
SPP43 WHITE
SPP50 CLEAR
SPP55 PINK
SPP55LS DARK BLUE
SPP60 LIGHT GREEN
SPP66 YELLOW
SPP67 GREY
SPP70 LIGHT BLUE
SPP73 WHITE
SPP73LS LIGHT GREEN
SPP77 CLEAR
SPP80 PINK
SPP85 LIGHT GREEN
SPP89 YELLOW
SPP89LS CLEAR
SPP90 GREY
SPP95 LIGHT BLUE
SPP95LS DARK GREEN
SPP97 WHITE
SPP100 CLEAR
SPP100LS YELLOW
SPP105 PINK
SPP110 LIGHT GREEN
SPP120 YELLOW
SPP140 GREY
Recommended for painting, powder coating, e-coating, plating and anodising
Plug threaded or non-threaded through holes
Ultrabake™ Pull Plugs are colour coded to increase visibility and to ease selection
High Temperature
Reusable
Custom designs available
Material: Silicone Colour: See chart for colour coding
PULL PLUGS
www.green t ree-eng .co .uk
PULL PLUGS 315°C
22 MASKING SPECIALITY PLUGS
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D EHFPP-M6 BLUE 23.62 6.78 5.00 4.45 52.10 1000
HFPP-M8 YELLOW 23.67 8.79 7.70 4.72 61.19 500
HFPP-M10 RUSTY RED 25.40 11.18 8.51 7.11 63.09 500
HFPP-M12 GREEN 28.58 13.00 10.59 8.38 76.61 250
HFPP-M14 BLUE 29.85 14.61 13.21 7.73 76.61 250
HFPP-M16 LIGHT GREY 30.50 17.90 15.40 8.00 83.00 250
HFPP-M20 YELLOW 31.75 20.32 17.15 12.95 85.60 250
Part Number
Colour Thread Size
Dimensions (mm) Quantity Per Bag
A B C D
DFPP-M6 DARK GREEN M6 5.00 7.80 6.81 32.99 1000
DFPP-M8 RUSTY RED M8 6.71 9.50 7.90 34.01 1000
DFPP-M10 DARK GREEN M10 8.51 11.30 8.99 35.00 500
DFPP-M12 PURPLE M12 10.31 13.00 11.61 45.01 250
DFPP-M16 WHITE M16 13.49 16.99 14.00 50.01 250
DFPP-M20 DARK BLUE M20 16.99 21.01 18.01 57.99 100
Recommended for painting, plating, e-coating, powder coating and anodising Masks off chamfer, first thread and last thread Recommended for weld nuts Designed to pull through in same direction as applied
Material: Silicone Colour: See chart for colour coding
Recommended for painting, plating, e-coating, powder coating and anodising Masks off the lead-in chamfer of threaded through holes and weld nuts Hollow design to aid heat transfer Designed to pull through in same direction as applied Custom designs available
Material: Silicone Colour: See chart for colour coding
Te l :+44 (0 )1684 533800
HOLLOW FLANGED PULL PLUGS 315°C
DUAL FLANGED PULL PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E
PTM-½ PINK 18.31 22.50 15.24 16.51 13.97 100
PTM-¾ YELLOW 23.92 27.81 15.24 16.51 15.87 100
PTM-1 CLEAR 29.59 35.12 17.78 16.51 19.05 50
PTM-1¼ DARK GREEN 38.53 43.25 19.05 16.51 19.05 50
PTM-1½ WHITE 44.47 50.06 18.41 16.51 19.05 50
PTM-2 DARK BLUE 56.48 61.97 18.41 16.51 19.05 25
PTM-3 DARK RED 83.66 89.15 18.41 16.51 31.75 25
PIPE THREAD MASK PLUG 315°C
Tear-away venting nipple allows for a pressure release during the curing process
Stays water-tight if nipple not removed
Outer rib for extra hold against threading on inside pipe Ergonomic handle design Recommended temperatures up to 315°C
Material: Silicone Colour: See chart for colour coding
SAMPLES AVAILABLE
Recommended for powder coating, e-coating, plating and anodising
Ideal for threaded or non-threaded holes
Dual purpose plug: to mask hole and earthing area
Standard and longer length available
Material: Silicone Colour: See chart for colour coding
MASKING SPECIALITY PLUGS 23
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E FUMFP-4-10 BLUE 4.00 6.00 8.00 10.00 N/A 13.70 250
UMFP-8-16 RUSTY RED 8.00 10.00 12.00 14.00 16.00 23.00 100
UMFP-10-18 GREEN 10.00 12.00 14.00 16.00 18.00 22.70 100
One plug fits numerous hole sizes Handle for easy removal Ideal for powder coating and wet paint Designed in conjunction with an
engineer from a leading manufacturer
Part Number
Colour ThreadSize
Dimensions (mm) Quantity Per Bag
A B C D E FUWPP-M3 DARK BLUE M3 10.01 2.67 2.72 9.91 1.52 2.29 250
UWPP-M4 DARK GREEN M4 10.01 3.56 2.72 9.91 2.03 3.05 250
UWPP-M4LS BLUE M4 10.01 3.56 2.72 22.23 2.03 4.83 250
UWPP-M5 CLEAR M5 10.01 4.47 2.72 9.91 2.54 3.81 250
UWPP-M6 WHITE M6 15.01 5.36 4.19 9.91 3.05 4.57 250
UWPP-M6LS RUSTY RED M6 15.01 5.36 4.19 38.10 3.05 6.35 250
UWPP-M8 GREY M8 15.01 7.19 4.19 9.91 4.09 6.10 250
UWPP-M10 YELLOW M10 19.99 9.53 5.33 9.91 5.44 8.13 100
UWPP-M12 PINK M12 19.99 10.87 5.33 9.91 6.20 9.14 100
UWPP-500 PINK 10-24 12.70 4.24 2.72 9.91 2.41 3.56 250
UWPP-500LS GREEN 10-24 12.70 4.24 2.72 28.58 2.41 5.72 250
UWPP-562 YELLOW 12-24 14.28 4.90 2.72 9.91 2.79 4.06 250
UWPP-562LS BLACK 12-24 14.28 4.90 2.72 38.10 2.79 5.72 250
UWPP-625 GREEN 1/4-20 15.88 5.72 2.72 9.91 3.25 4.83 250
UWPP-688 CLEAR 5/16-18 17.48 7.21 4.19 9.91 4.12 6.10 250
UWPP-812 GREY 3/8-16 20.62 8.69 4.19 9.91 4.95 7.37 100
UWPP-922 WHITE 7/16-14 23.42 10.16 5.33 9.91 5.79 8.64 100
UWPP-1060 DARK BLUE 1/2-13 26.92 11.66 5.33 9.91 6.66 9.91 100
WASHER PULL PLUGS 315°C
MULTI-FLANGED PLUGS 315°C
www.green t ree-eng .co .uk
Material: SiliconeColour: See chart for colour coding
Recommended for powder coating, e-coating, anodising and plating
For masking the earthing areas around blind and through holes
Single plug can be used for 2 hole sizes
Reusable
Tapered design aids insertion
Material: SiliconeColour: See chart for colour coding
24 MASKING SPECIALITY PLUGS
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E FUW-380 YELLOW 6.35 2.44 3.25 8.84 5.00 12.80 1000
UW-M3 DARK GREEN 7.01 2.79 3.71 5.59 5.00 7.39 1000
UW-405 CLEAR 8.10 3.15 6.40 9.78 5.51 12.98 1000
UW-415 LIGHT GREEN 12.75 3.23 4.72 9.68 5.13 12.62 500
UW-440 YELLOW 15.88 3.23 6.50 9.09 4.85 12.85 500
UW-400 BLACK 7.93 3.40 3.99 12.45 4.90 12.75 1000
UW-410 PINK 9.65 3.48 4.06 11.53 4.98 12.88 1000
UW-M4 PINK 8.99 3.61 4.70 7.19 5.00 9.40 1000
UW-M5 CLEAR 10.00 4.50 5.69 8.99 5.00 11.41 1000
UW-412 RED 9.53 5.03 6.96 12.50 5.03 12.70 500
UW-M6 RED 12.50 5.31 6.71 10.59 5.00 13.41 500
UW-420 DARK BLUE 12.83 6.20 6.53 12.93 4.91 13.11 500
UW-M8 BLACK 16.99 7.11 8.71 14.20 5.00 17.40 500
UW-M10 YELLOW 21.01 9.60 10.69 19.20 5.00 21.41 250
UW-M12 CLEAR 24.00 10.90 12.70 21.79 5.00 25.40 250
DUAL PURPOSE WASHER PLUGS 315°C
Te l :+44 (0 )1684 533800
TAPERED VINYL PLUGS 260°C/177°C
Part Number Dimensions (mm) CartonQuantity
Mini PackQuantity
High Temp 260°C
Colour 177°C Colour A B C
HTP-4 BLACK TP-4 RED 3.81 1.78 15.88 1000 50
HTP-6 BLACK TP-6 BLUE 5.08 2.54 12.07 1000 50
HTP-8 BLACK TP-8 GREEN 6.35 3.56 19.05 1000 50
HTP-9 BLACK TP-9 BROWN 7.62 3.56 25.40 1000 50
HTP-10 BLACK TP-10 ORANGE 7.87 4.06 19.05 1000 50
HTP-11 BLACK TP-11 GREY 7.87 4.83 25.40 1000 50
HTP-12 BLACK TP-12 RED 8.64 4.83 19.05 1000 50
Designed with a distinct tapered configuration ideal for plugging small holes
Ideal for masking applications during painting, plating and powder coating operations
Easy installation and removal
Flexible
Material: Flex500® or standard vinyl Colour: Black or optional yellow (HTP), See chart for colour coding (TP).
SAMPLES AVAILABLE
MASKING SPECIALITY PLUGS 25
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E
SFP-M8 YELLOW 7.39 11.99 4.50 42.01 11.99 250
SFP-M10 PINK 8.71 14.71 7.01 46.99 13.01 250
SFP-M12 CLEAR 10.69 15.80 8.00 51.00 14.00 250
SFP-M14 GREY 13.69 18.01 10.59 64.01 15.01 250
Recommended for powder coating, e-coating, anodising and plating
Provides a concentric mask around a hole
Ideal for masking the earthing area around threaded and through holes
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D
HWP-0330 CLEAR 12.50 6.30 23.01 3.30 200
HWP-0450 BLACK 16.00 8.51 24.99 4.50 200
HWP-0500 YELLOW 16.51 10.01 27.99 5.00 200
HWP-0800 DARK BLUE 19.00 14.00 35.99 8.00 200
HWP-1150 PURPLE 24.99 17.50 38.00 11.51 200
HWP-1350 RUSTY RED 27.99 19.51 51.00 13.49 100
HWP-1480 GREY 25.40 20.80 49.00 14.81 100
HWP-1600 CLEAR 30.99 22.00 53.01 16.00 100
www.green t ree-eng .co .uk
FLANGED PLUGS 315°C
HOLLOW WASHER PLUGS 315°C
Reusable
Can be pulled into sheet metal holes
Conforms to irregular shapes
Can be used as a plug or cap
Material: SiliconeColour: See chart for colour coding
Ideal for powder coating and wet paint
Used in conjunction with insertion tool/dowel
Specifically designed to mask off through holes plus counter sink
Suitable for countersink
Other materials available
Material: Silicone Colour: See chart for colour coding
26 MASKING SPECIALITY PLUGS
Part Number
Colour Thread Dimensions (mm) QuantityPer Bag
A B C D E F G
M20061-01 PINK M6 5.60 9.00 3.00 1.50 6.50 9.50 13.00 100
M20062-01 RED M8 7.50 11.00 3.70 2.00 7.90 10.10 15.00 100
M20063-01 BLUE M10 9.30 13.50 5.50 3.00 10.00 10.00 16.80 100
M20064-01 YELLOW M11 10.00 12.40 5.50 3.00 9.00 10.00 16.80 100
M20065-01 GREEN M12 11.00 13.70 6.00 4.00 12.90 12.10 21.80 100 Suitable for powder coating, e-coating, anodising and plating
Specially designed for weld nut and blind hole applications
Stepped plug masks off the first thread
Material: SiliconeColour: See chart for colour coding
Te l :+44 (0 )1684 533800
HARDY PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E
SP-3 LIGHT BLUE 7.01 3.00 2.36 7.01 13.01 500
SP-4 LIGHT GREEN 8.00 5.00 2.85 8.00 14.00 500
SP-5 PURPLE 8.99 5.99 3.94 8.99 16.03 500
SP-6 BLACK 10.16 6.43 4.78 10.16 17.63 250
SP-8 WHITE 12.42 8.23 5.95 9.75 17.32 250
Recommended for powder coating, e-coating, anodising and plating
Provides a clean area around diameter of hole for earthing purposes
Eliminates 2-step masking
STEP PLUGS 315°C
Plugs threaded or non-threaded blind holes
Reusable
Handle aides insertion & removal
Material: SiliconeColour: See chart for colour coding
SAMPLES AVAILABLE
MASKING SPECIALITY PLUGS 27
Recommended for plating, anodising and spray painting
Used for tapped/blind holes
Cuts own thread for liquid tight seal
Part Number
Thread Sizes Dimensions (mm)QuantityPer BoxUNC UNF A B
STP-2 2-56 2-64 1.52 2.06 500
STP-3 3-48 3-56 1.93 2.31 500
STP-4 4-40 4-48 2.03 2.66 500
STP-6 6-32 6-40 2.70 3.14 500
STP-8 8-32 8-36 3.39 4.01 500
STP-10 10-24 10-32 3.68 4.56 500
STP-12 12-24 12-28 4.21 4.97 100
STP-1/4 1/4-20 1/4-28 4.82 5.97 100
STP-5/16 5/16-18 5/16-24 6.06 7.12 100
STP-3/8 3/8-16 3/8-24 7.68 8.45 100
STP-1/2 1/2-13 1/2-20 9.99 11.34 100
www.green t ree-eng .co .uk
NYLON SELF-THREADING PLUGS 82°C
For masking simultaneously entry and exit threads on welding nuts, press nuts etc
The washer shape grips against the entrance on both sides
Part Number
Colour Thread Dimensions (mm) Quantity Per Bag
A B C
DWP-M4 YELLOW M4 3.68 4.41 3.17 1000
DWP-M5 PURPLE M5 5.35 5.25 3.55 1000
DWP-M6 CLEAR M6 6.17 6.47 4.47 1000
DWP-M8 DARK BLUE M8 8.25 8.20 6.14 1000
DWP-M10 PINK M10 10.46 10.41 8.22 500
DWP-M12 RED M12 13.51 12.77 9.52 500
DWP-M16 GREEN M16 16.78 16.71 12.77 250
DOUBLE WASHER PLUGS 315°C
Can be installed by both pushing and pulling
Excellent positive seal at both ends
Resusable
Excellent chemical resistance
Oversized design to eliminate ingress (leaks)
Custom designs available
Material: Low-Density PolyethyleneColour: White
Material: SiliconeColour: See chart for colour coding
Improve productivity
Increase production line speeds
Create better finish quality
Reject/rework fewer parts
Eliminate manual steps from the finishing process
Reusable
Lowering cost
Satisfying ‘green’ objectives
CUSTOM RUBBER SHAPES & MOULDINGS for masking & protection
28 CUSTOM DESIGN RUBBER Te l :+44 (0 )1684 533800SAMPLES AVAILABLE
CUSTOM DESIGN RUBBER 29
Recent advances in custom moulded
rubber masks have revolutionised the
masking industry. Manufactured from
the latest high-tech materials, they can
protect even the most unusual surfaces
and parts against hostile finishing and
manufacturing processes.
Easy to install and remove, custom
moulded masks are reusable, durable
and can mask almost any two or three
dimensional part or aperture. Whilst
tooling costs can be higher when
compared with other masking methods
they can eliminate multiple manual
finishing steps or dramatically speed
masking installation and removal
providing a return on investment very
quickly.
With its own in-house compounding
facility Greentree offers an extensive
range of materials both organic and
inorganic, including conductive rubber
and rubber to metal bondings to solve
the most demanding of applications.
Whether it be one-offs or a large
production run we can engineer a
solution to your masking problem.
CUSTOM RUBBER SHAPES & MOULDINGS for masking & protection
www.green t ree-eng .co .uk
Call our Sales Team now on +44 (0)1684 533 800
or e-mail us at [email protected] for
more information or to arrange a visit.
30 MISC MASKING
Part Number
Size (mm)
Length/Width Thickness
US031-36 914 x 914 0.79
US062-36 914 x 914 1.58
US093-36 914 x 914 2.36
US125-36 914 x 914 3.18
US187-36 914 x 914 4.75
US250-36 914 x 914 6.35
US375-36 914 x 914 9.53
US500-36 914 x 914 12.70
Can be supplied in sheet form or custom shape
Recommended for powder coating, e-coating, plating and anodising
Sheeting can be used for gaskets, pads, strips, washers and seals
Reusable Other materials available
Material: Silicone Colour: Rusty Red
Te l :+44 (0 )1684 533800
RUBBER SHEETING 315°C
Part Number
Diameter (mm)
Coil Length(mtrs)
UC0070 1.78 30
UC0093 2.36 30
UC0103 2.62 30
UC0125 3.18 30
UC0139 3.53 30
UC0156 3.96 30
UC0187 4.75 30
UC0210 5.33 30
Part Number
Diameter (mm)
Coil Length(mtrs)
UC0250 6.35 30
UC0275 6.99 30
UC0312 7.93 30
UC0375 9.53 15
UC0437 11.10 15
UC0500 12.70 15
UC0562 14.28 15
Recommended for powder coating, e-coating, plating and anodising
Ideal for slots and through holes Flexible and reusable Other sizes available
Material: Silicone Colour: Clear
RUBBER CORD 315°C
Protects threads, one size fits several diameters
Less surface tension to aid removalMaterial: SiliconeColour: See chart for colour coding
Part Number
Colour Min/Max dia (mm) Coil Length(mtrs)
UST-0500 RUSTY RED 12.70 - 15.88 30
UST-0750 GREEN 19.05 - 22.23 15
UST-1000 GREEN 25.40 - 30.48 15
UST-1500 RUSTY RED 38.10 - 44.45 15
STAR TUBING 315°C
SAMPLES AVAILABLE
MULTI-DIAMETER TUBING 315°CPart Number
Min/Max dia (mm) Coil Length(mtrs)
MDTO350 -0650 8.89-16.50 30
MDTO350 -0650 16.50-38.10 15
Flexible to fit a wide range of diameters Cut to length
Material: SiliconeColour: Rusty Red
MISC MASKING 31
Part Number
Colour Thread Size I.D. (mm) O.D. (mm) Coil Length (mtrs)
ST0040 CLEAR 1.02 4.19 30ST0062 CLEAR 1.58 4.75 30ST0080 CLEAR 2.03 5.21 30ST0093 CLEAR M3 2.36 5.54 30ST0109 CLEAR 2.77 5.94 30SRR-M3 BLUE M3 2.87 5.32 30ST0125 CLEAR 6-32 3.18 6.35 30ST0140 CLEAR 3.56 6.73 30SRR-M4 GREEN M4 3.87 6.34 30ST0156 CLEAR M4 3.96 7.14 30ST0172 CLEAR 10-24 4.37 7.54 30ST0187 CLEAR M5 4.75 7.93 30SRR-M5 MAUVE M5 4.87 7.10 30ST0203 CLEAR 5.16 8.33 30ST0218 CLEAR 5.54 8.71 30SRR-M6 BLACK M6 5.87 8.70 30ST0234 CLEAR M6 5.94 9.12 30ST0250 CLEAR 6.35 9.53 30ST0281 CLEAR 5/16-18 7.14 10.31 30SRR-M8 WHITE M8 7.49 10.35 30ST0312 CLEAR M8 7.93 11.10 30ST0343 CLEAR 8.71 11.89 30ST0375 CLEAR M10 9.53 12.70 30SRR-M10 BROWN M10 9.87 12.75 30ST0406 CLEAR 7/16-14 10.31 13.49 30ST0437 CLEAR M12 11.10 14.28 30ST0500 CLEAR 12.70 15.88 30ST0625 RUSTY RED M17 15.88 19.05 15ST0750 RUSTY RED 19.05 22.23 15ST0875 RUSTY RED 22.23 25.40 15ST0937 RUSTY RED 23.80 26.98 15ST1000 RUSTY RED 25.40 28.58 15ST1125 RUSTY RED 28.58 31.75 15ST1250 RUSTY RED 31.75 34.93 15ST1375 RUSTY RED 34.93 38.10 15ST1500 RUSTY RED 38.10 41.28 15ST1625 RUSTY RED 41.28 44.45 15ST1750 RUSTY RED 44.45 47.63 15ST1875 RUSTY RED 47.63 50.80 15ST2000 RUSTY RED 50.80 53.98 15
For powder coating, e-coating, plating and anodising
1.59mm wall thickness Ideal for long studs,
pins and tubing Flexible and reusable Can be cut to
length Larger diameters
available Available in lower
temperatures
Material: SiliconeColour: See chart for colour coding
Metric Sizes Colour coded Economical order quantities Also available: silicone
sleeves for large diameter bores masking
Part Number Colour Thread Size I.D. (mm) Length (mm) Quantity per Bag
SRS-M3 BLUE M3 2.87 40 100SRS-M4 GREEN M4 3.87 40 100SRS-M5 MAUVE M5 4.87 40 100SRS-M6 BLACK M6 5.87 50 100SRS-M8 WHITE M8 7.49 50 100SRS-M9 YELLOW M9 8.87 50 100SRS-M10 BROWN M10 9.87 50 100
SILICONE RUBBER TUBING 315°C
CUT / SILICONE SLEEVES 260°C
www.green t ree-eng .co .uk
Material: Silicone Colour: See chart for colour coding
32 TAPES
Product Code
Backing Material
Colour Temp(°C)
Adhesive Roll Length
(Metres)
AerospaceApproved
Available In Page Description
Discs Custom Die-Cuts
Standard Roll
Widths
Custom Roll
Widths
SRT Silicone Various 315 None 11 36 Tough, resilient self-fusing/sealing tape. High temperature applications. Ideally suited for plating, anodising and powder coating.
PC198 Glass Cloth Cream 260 Silicone 33 36 High temperature, Thermal Spray, Shot blasting, Electrical insulation, Flame resistant, High tensile strength and edge tear resistant.
170-10 Fibreglass Green 260 Silicone 33 For plasma spray / high abrasion applications. Produces cleaner coating lines. May be used with fewer layers (and less quantity) than standard tapes.
22 Polyimide Amber 260 Silicone 33 34/35 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
PC11 Polyester Red 230 Silicone 66 34/35 Offers all the benefits of PC21, with a higher temp. Good for covering large areas that retain heat after bake cycle. Removes cleanly.
PC90 Polyester Blue 220 Silicone 66 34/35 Offers all the benefits of PC21, with a reduced thickness, making it ideal for curved surfaces. Removes cleanly.
PC25 Polyester Green 220 Silicone 66 34/35 Double thickness version of PC21 for improved rigidity.
PC21 Polyester Green 220 Silicone 66 34/35 A high temperature tape for powder coating and anodising. Removes cleanly without leaving adhesive residue.
PC30 Polyester Yellow 205 Silicone 66 34/35 A good performance polyester tape with a slightly lower temperature rating to PC21. Higher backed adhesive.
2595 Paper Buff 200 Silicone 66 40/41 Unique high temperature, hand tearable paper tape, non-flaking upon removal.
SAT Paper Buff 180 Rubber 66 40/41 Economical, high-temperature paper tape, which can be used as a lower temperature alternative to Polyester.
9266 Polyester Light Green 180 Rubber 66 For demanding temperature and pressure conditions of autoclave and composite bonding applications.
501E Paper Buff 160 Rubber 50 40/41 For industrial paint applications up to 160°C. Excellent strength, flexibility and adhesion. Provides a straight edge. Anti-flaking and leaves no residue on removal.
GTE4330 Paper Buff 160 Rubber 50 40/41 Flexible wet resistant tape, tolerates drying, gives a well-defined masking line and removes cleanly.
KD11 Paper Buff 150 Rubber 55 40/41 Similar properties to GTE4330 but offering a wider range of sizes. Provides good conformability and will strip hot.
425 Aluminium Silver 150 Acrylic 55 37 Aluminium tape, flame resistant, heat reflective. Widely used during aircraft paint stripping.
427 Aluminium (liner) Silver 150 Acrylic 55 37 Aluminium tape, linered version of the above (425). Ideal for diecutting.
431 Aluminium Silver 150 Acrylic 55 37 Aluminium tape, flame resistant, thermally conductive, moisture and chemical resistant. Thinner version of 425 tape.
1104 Paper Buff 135 Rubber 50 40/41 For applications where a less aggressive adhesive is important. Can be used for most painting applications. Removes cleanly at baking temperatures of 120°C for 45 mins.
250 Paper Buff 120 Rubber 55 40/41 Paint adhesion test tape.
420 Lead Foil (liner) Silver 105 Rubber 33 37 Conformal lead tape on a liner, good thermal properties, ideal for plating and cutting, reduces build-up.
GSN Vinyl Yellow 100 None 150 A non adhesive variant of GSA with extreme conformability. Self adhering capabilities gives a leak proof seal.
GSA Vinyl Yellow 100 Hycar-Nitrile 20 Designed specifically for plating, electroless nickel, anodising and abrasive blasting. Highly flexible/conformable.
201E Paper Buff 80 Rubber 50 40/41 For general industrial low temperature paint masking. Also suitable for low temperature bake ovens.
484 Vinyl Yellow / Brown 77 Rubber 33 Conformable and abrasion resistant vinyl tape for masking during electroplating and anodising.
470 Vinyl Tan 77 Rubber 33 Good chemical resistance during plating. Conformable, resistant to electroplating and blasting.
471 Vinyl Various 75 Rubber 33 Ideal for masking during nickel, gold and copper plating.
101E Paper Buff 30 Rubber 50 40/41 For a wide variety of industrial uses including masking, bundling, labelling, decorating or sealing up to 30°C. Good solvent resistance, good consistent unwind.
2835 Coex LDPE Clear/Blue Acrylic 100 A protection film primarily for glass and plastic application.
9830 Paper Salmon 80 Rubber 25 Protection and masking during sandblasting and shotblasting offering protection against abrasion for materials such as glass, granite, marble, metal etc.
AT7 PVC Various 70 Rubber 33 A PVC tape offering clean peel and used for applications including colour coding electrical cables, masking and coil wrapping.
BT100 Rubber White N/A Acrylic 9.14 Protective masking tape for plastic media blast (PMB), or other shotpeen processes. Excellent product protection. White crepe release coated paper liner allows it to tear easily by hand.
TAPE SELECTOR GUIDE
Te l :+44 (0 )1684 533800SAMPLES AVAILABLE
TAPES 33
Product Code
Backing Material
Colour Temp(°C)
Adhesive Roll Length
(Metres)
AerospaceApproved
Available In Page Description
Discs Custom Die-Cuts
Standard Roll
Widths
Custom Roll
Widths
SRT Silicone Various 315 None 11 36 Tough, resilient self-fusing/sealing tape. High temperature applications. Ideally suited for plating, anodising and powder coating.
PC198 Glass Cloth Cream 260 Silicone 33 36 High temperature, Thermal Spray, Shot blasting, Electrical insulation, Flame resistant, High tensile strength and edge tear resistant.
170-10 Fibreglass Green 260 Silicone 33 For plasma spray / high abrasion applications. Produces cleaner coating lines. May be used with fewer layers (and less quantity) than standard tapes.
22 Polyimide Amber 260 Silicone 33 34/35 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
PC11 Polyester Red 230 Silicone 66 34/35 Offers all the benefits of PC21, with a higher temp. Good for covering large areas that retain heat after bake cycle. Removes cleanly.
PC90 Polyester Blue 220 Silicone 66 34/35 Offers all the benefits of PC21, with a reduced thickness, making it ideal for curved surfaces. Removes cleanly.
PC25 Polyester Green 220 Silicone 66 34/35 Double thickness version of PC21 for improved rigidity.
PC21 Polyester Green 220 Silicone 66 34/35 A high temperature tape for powder coating and anodising. Removes cleanly without leaving adhesive residue.
PC30 Polyester Yellow 205 Silicone 66 34/35 A good performance polyester tape with a slightly lower temperature rating to PC21. Higher backed adhesive.
2595 Paper Buff 200 Silicone 66 40/41 Unique high temperature, hand tearable paper tape, non-flaking upon removal.
SAT Paper Buff 180 Rubber 66 40/41 Economical, high-temperature paper tape, which can be used as a lower temperature alternative to Polyester.
9266 Polyester Light Green 180 Rubber 66 For demanding temperature and pressure conditions of autoclave and composite bonding applications.
501E Paper Buff 160 Rubber 50 40/41 For industrial paint applications up to 160°C. Excellent strength, flexibility and adhesion. Provides a straight edge. Anti-flaking and leaves no residue on removal.
GTE4330 Paper Buff 160 Rubber 50 40/41 Flexible wet resistant tape, tolerates drying, gives a well-defined masking line and removes cleanly.
KD11 Paper Buff 150 Rubber 55 40/41 Similar properties to GTE4330 but offering a wider range of sizes. Provides good conformability and will strip hot.
425 Aluminium Silver 150 Acrylic 55 37 Aluminium tape, flame resistant, heat reflective. Widely used during aircraft paint stripping.
427 Aluminium (liner) Silver 150 Acrylic 55 37 Aluminium tape, linered version of the above (425). Ideal for diecutting.
431 Aluminium Silver 150 Acrylic 55 37 Aluminium tape, flame resistant, thermally conductive, moisture and chemical resistant. Thinner version of 425 tape.
1104 Paper Buff 135 Rubber 50 40/41 For applications where a less aggressive adhesive is important. Can be used for most painting applications. Removes cleanly at baking temperatures of 120°C for 45 mins.
250 Paper Buff 120 Rubber 55 40/41 Paint adhesion test tape.
420 Lead Foil (liner) Silver 105 Rubber 33 37 Conformal lead tape on a liner, good thermal properties, ideal for plating and cutting, reduces build-up.
GSN Vinyl Yellow 100 None 150 A non adhesive variant of GSA with extreme conformability. Self adhering capabilities gives a leak proof seal.
GSA Vinyl Yellow 100 Hycar-Nitrile 20 Designed specifically for plating, electroless nickel, anodising and abrasive blasting. Highly flexible/conformable.
201E Paper Buff 80 Rubber 50 40/41 For general industrial low temperature paint masking. Also suitable for low temperature bake ovens.
484 Vinyl Yellow / Brown 77 Rubber 33 Conformable and abrasion resistant vinyl tape for masking during electroplating and anodising.
470 Vinyl Tan 77 Rubber 33 Good chemical resistance during plating. Conformable, resistant to electroplating and blasting.
471 Vinyl Various 75 Rubber 33 Ideal for masking during nickel, gold and copper plating.
101E Paper Buff 30 Rubber 50 40/41 For a wide variety of industrial uses including masking, bundling, labelling, decorating or sealing up to 30°C. Good solvent resistance, good consistent unwind.
2835 Coex LDPE Clear/Blue Acrylic 100 A protection film primarily for glass and plastic application.
9830 Paper Salmon 80 Rubber 25 Protection and masking during sandblasting and shotblasting offering protection against abrasion for materials such as glass, granite, marble, metal etc.
AT7 PVC Various 70 Rubber 33 A PVC tape offering clean peel and used for applications including colour coding electrical cables, masking and coil wrapping.
BT100 Rubber White N/A Acrylic 9.14 Protective masking tape for plastic media blast (PMB), or other shotpeen processes. Excellent product protection. White crepe release coated paper liner allows it to tear easily by hand.
Other approved specialist tapes available, please contact us for details
TAPE SELECTOR GUIDE
www.green t ree-eng .co .uk
34 TAPES
Size Roll Length (M)
PC30Part No.
PC21Part No.Metric (mm) Imperial
3.18 1/8” 66 PC30-0125 PC21-0125
5.00 66 PC30-5MM PC21-5MM
6.35 1/4” 66 PC30-0250 PC21-0250
7.93 66 PC30-0312 PC21-0312
9.53 66 PC30-0375 PC21-0375
10.00 66 PC30-10MM PC21-10MM
11.10 66 PC30-0437 PC21-0437
12.70 1/2” 66 PC30-0500 PC21-0500
15.00 66 PC30-15MM PC21-15MM
15.88 66 PC30-0625 PC21-0625
19.05 3/4” 66 PC30-0750 PC21-0750
20.00 66 PC30-20MM PC21-20MM
22.23 66 PC30-0875 PC21-0875
25.00 66 PC30-25MM PC21-25MM
25.40 1” 66 PC30-1000 PC21-1000
30.00 66 PC30-30MM PC21-30MM
31.75 1 1/4” 66 PC30-1250 PC21-1250
35.00 66 PC30-35MM PC21-35MM
38.10 1 1/2” 66 PC30-1500 PC21-1500
40.00 66 PC30-40MM PC21-40MM
45.00 66 PC30-45MM PC21-45MM
50.00 66 PC30-50MM PC21-50MM
50.80 2” 66 PC30-2000 PC21-2000
63.50 2 1/2” 66 PC30-2500 PC21-2500
76.20 3” 66 PC30-3000 PC21-3000
80.00 66 PC30-80MM PC21-80MM
88.90 3 1/2” 66 PC30-3500 PC21-3500
100.00 66 PC30-100MM PC21-100MM
101.60 4” 66 PC30-4000 PC21-4000
114.30 4 1/2” 66 PC30-4500 PC21-4500
127.00 5” 66 PC30-5000 PC21-5000
139.70 5 1/2” 66 PC30-5500 PC21-5500
150.00 66 PC30-150MM PC21-150MM
152.40 6” 66 PC30-6000 PC21-6000
177.80 7” 66 PC30-7000 PC21-7000
203.20 8” 66 PC30-8000 PC21-8000
205ºC 220ºC
Greentree supply a broad range of masking and associated tapes for varied applications. The tapes come in a variety of widths and many can be supplied in standard shapes such as discs or squares
APPLICATIONTapes should be applied to clean surfaces, firmly pressing into place to ensure good overall adhesion. Removal should be as soon as possible to leave a residue free surface.
PC30 - YELLOW - 205ºC For lower temperatures
and short oven time
Recommended for powder coating, e-coating and anodising.
Material Polyester
Adhesive Silicone
Specialist widths available
Die cuts available
Aerospace approved
See pages 40/41 for paper tapes
Te l :+44 (0 )1684 533800
HIGH TEMPERATURE TAPES
SAMPLES AVAILABLE
TAPES 35
Size Roll Length (M)
PC30Part No.
PC21Part No.Metric (mm) Imperial
3.18 1/8” 66 PC30-0125 PC21-0125
5.00 66 PC30-5MM PC21-5MM
6.35 1/4” 66 PC30-0250 PC21-0250
7.93 66 PC30-0312 PC21-0312
9.53 66 PC30-0375 PC21-0375
10.00 66 PC30-10MM PC21-10MM
11.10 66 PC30-0437 PC21-0437
12.70 1/2” 66 PC30-0500 PC21-0500
15.00 66 PC30-15MM PC21-15MM
15.88 66 PC30-0625 PC21-0625
19.05 3/4” 66 PC30-0750 PC21-0750
20.00 66 PC30-20MM PC21-20MM
22.23 66 PC30-0875 PC21-0875
25.00 66 PC30-25MM PC21-25MM
25.40 1” 66 PC30-1000 PC21-1000
30.00 66 PC30-30MM PC21-30MM
31.75 1 1/4” 66 PC30-1250 PC21-1250
35.00 66 PC30-35MM PC21-35MM
38.10 1 1/2” 66 PC30-1500 PC21-1500
40.00 66 PC30-40MM PC21-40MM
45.00 66 PC30-45MM PC21-45MM
50.00 66 PC30-50MM PC21-50MM
50.80 2” 66 PC30-2000 PC21-2000
63.50 2 1/2” 66 PC30-2500 PC21-2500
76.20 3” 66 PC30-3000 PC21-3000
80.00 66 PC30-80MM PC21-80MM
88.90 3 1/2” 66 PC30-3500 PC21-3500
100.00 66 PC30-100MM PC21-100MM
101.60 4” 66 PC30-4000 PC21-4000
114.30 4 1/2” 66 PC30-4500 PC21-4500
127.00 5” 66 PC30-5000 PC21-5000
139.70 5 1/2” 66 PC30-5500 PC21-5500
150.00 66 PC30-150MM PC21-150MM
152.40 6” 66 PC30-6000 PC21-6000
177.80 7” 66 PC30-7000 PC21-7000
203.20 8” 66 PC30-8000 PC21-8000
PC90Part No.
PC11Part No.
PC90-0125 PC11-0125
PC90-5MM PC11-5MM
PC90-0250 PC11-0250
PC90-0312 PC11-0312
PC90-0375 PC11-0375
PC90-10MM PC11-10MM
PC90-0437 PC11-0437
PC90-0500 PC11-0500
PC90-15MM PC11-15MM
PC90-0625 PC11-0625
PC90-0750 PC11- 0750
PC90-20MM PC11-20MM
PC90-0875 PC11-0875
PC90-25MM PC11-25MM
PC90-1000 PC11-1000
PC90-30MM PC11-30MM
PC90-1250 PC11-1250
PC90-35MM PC11-35MM
PC90-1500 PC11-1500
PC90-40MM PC11-40MM
PC90-45MM PC11-45MM
PC90-50MM PC11-50MM
PC90-2000 PC11-2000
PC90-2500 PC11-2500
PC90-3000 PC11-3000
PC90-80MM PC11-80MM
PC90-3500 PC11-3500
PC90-100MM PC11-100MM
PC90-4000 PC11-4000
PC90-4500 PC11-4500
PC90-5000 PC11-5000
PC90-5500 PC11-5500
PC90-150MM PC11-150MM
PC90-6000 PC11-6000
PC90-7000 PC11-7000
PC90-8000 PC11-8000
Roll Length (M)
# 22Part No.
33 22-0125
33 22-5MM
33 22-0250
33 22-0312
33 22-0375
33 22-10MM
33 22-0437
33 22-0500
33 22-15MM
33 22-0625
33 22-0750
33 22-20MM
33 22-0875
33 22-25MM
33 22-1000
33 22-30MM
33 22-1250
33 22-35MM
33 22-1500
33 22-40MM
33 22-45MM
33 22-50MM
33 22-2000
33 22-2500
33 22-3000
33 22-80MM
33 22-3500
33 22-100MM
33 22-4000
33 22-4500
33 22-5000
33 22-5500
33 22-150MM
33 22-6000
33 22-7000
33 22-8000
220ºC 230ºC 260ºCPC21 - GREEN - 220ºC Our most popular brand
used throughout the industry.
Now available in double thicknesses (PC25) for applications requiring a thicker coating allowing for greater ease of tape removal.
Recommended for powder coating, e-coating and anodising
Material Polyester
Adhesive Silicone Aerospace approved
PC90 - BLUE - 220ºC A tape similar to PC21 but half the
thickness making it ideal for curved and conformed surfaces and profiles.
Recommended for powder coating, e-coating and anodising.
Material Polyester
Adhesive Silicone
Aerospace approved
PC11 - RED - 230ºC A higher temperature tape
where longer curing times are required.
Recommended for powder coating, e-coating and anodising.
Material Polyester
Adhesive Silicone
Aerospace approved
#22 - AMBER - 260ºC A very high temperature tape
offering excellent electrical and thermal insulation for applications requiring long cure times.
Recommended for electrical insulation, wave soldering and masking of circuit boards.
Material Polyimide
Adhesive Silicone
Aerospace approved
www.green t ree-eng .co .uk
HIGH TEMPERATURE TAPES
Recommended for thermal spray, high-temp powder coating and shot blasting
Good resistance to solvents and abrasion
Flame retardant silicone adhesive
High tensile strength
See page 45 for Discs
No minimum order quantity
36 TAPES
Part Number
Width(mm)
Imperial Size
Rolls Length(mtrs)
PC198-0125 3.18 1/8” 33
PC198-0250 6.35 1/4” 33
PC198-0375 9.53 3/8” 33
PC198-0500 12.70 1/2” 33
PC198-0625 15.88 5/8” 33
PC198-0750 19.05 3/4” 33
PC198-1000 25.40 1” 33
PC198-1250 31.75 1 1/4” 33
PC198-1500 38.10 1 1/2” 33
PC198-2000 50.80 2” 33
PC198-2500 63.50 2 1/2” 33
PC198-3000 76.20 3” 33
PC198-4000 101.60 4” 33
PC198-6000 152.40 6” 33
Part Number
Colour Width(mm)
Thickness(mm)
Length(mtrs)
SRT0750-20 BLACK 19.05 0.51 11
SRT1000-20 GREY 25.40 0.51 11
SRT1000-30 ORANGE 25.40 0.76 11
SRT1500-20 RED 38.10 0.51 11
SRT1500-30 BLUE 38.10 0.76 11
SRT1750-20 GREEN 44.45 0.51 11
SRT2000-20 YELLOW 50.80 0.51 11
SRT2000-30 WHITE 50.80 0.76 11
SRT0753-10R RED 19.05 0.25 16.5
SRT0753-20R BLUE 19.05 0.51 11
Other sizes available on request including metric widths.
For more specialist thermal, VOF and plasma applications we offer a range of high
performance tapes in different widths and as custom die-cuts.
A tough, resilient, self fusing and adhering tape
For covering irregular shaped objects
Provides a void free insulation
Recommended for powder coating, e-coating, plating and anodising
Range of sizes, thicknesses and colours
No adhesive
Waterproof
Aerospace approved
GLASS CLOTH TAPE260°C
SILICONE RUBBER TAPE315°C
Te l :+44 (0 )1684 533800
AVAILABLE IN CUSTOM WIDTHS OR AS DIE-CUTS
SAMPLES AVAILABLE
TAPES 37
Excellent adhesion Recommended as a mask during
electroplating and anodising Provides moisture and radiation
barrier in certain applications Good conformability having
electrically and thermally conductive properties.
Available in disc or die-cut form Solvent resistant Aerospace approved Available in two thicknesses
Part Number Size Total Tape Thickness
(mm)
Roll Length (mtrs)Metric (mm) Imperial
431-12MM 12 0.08 55
431-25MM 25 0.08 55
425-1000 25.40 1” 0.12 55
431-50MM 50 0.08 55
425-50MM 50 2” 0.12 55
Part Number Size Roll Length (mtrs)Metric (mm) Imperial
9GRE003454 2.00 x 500 100 pcs
9GRE003457 3.00 33
420-0125 3.17 1/8” 33
420-4MM 4.00 33
420-0250 6.35 1/4” 33
420-0312 7.93 5/16” 33
9GRE003456 9.00 33
420-0375 9.53 3/8” 33
420-0500 12.70 1/2” 33
420-1000 25.40 1” 33
420-1250 31.75 1 1/4” 33
420-1500 38.10 1 1/2” 33
420-2000 50.80 2” 33
420-2500 63.50 2 1/2” 33
420-3000 76.20 3” 33
420-3500 88.90 3 1/2” 33
420-4000 101.60 4” 33
420-4500 114.30 4 1/2” 33
420-5000 127.00 5” 33
420-5500 139.70 5 1/2” 33
420-6000 152.40 6” 33
Superior bond (acrylic adhesive) High thermal conductivity to maximise efficiency of heating or cooling Moisture and solvent resistant Flame resistant Available on a liner (427) Available as discs or die-cut Aerospace approved Available in two thicknesses
LEAD FOIL TAPE105°C
ALUMINIUM FOIL TAPES 149°C
www.green t ree-eng .co .uk
38 CUSTOM DIE CUTS Te l :+44 (0 )1684 533800
Extensive choice of materials, including rubber, cardboard, corrugated plastic sheeting etc
Temperatures up to 360°C
With or without Adhesive
Sizes from 3mm to 3000mm
Next Day Delivery
One off or volume production
No set up tooling charges
Free samples
Protecting a surface couldn’t be easier with CUSTOM DIE CUTS.
Give us the area you wish to protect and we will provide the mask
Any shape, any size.
CUSTOM DIE-CUTS
SAMPLES AVAILABLE
CUSTOM DIE-CUTS 39
Greentree custom die-cuts are extremely effective when
masking a flat or curved surface. They are easy to apply
and remove leaving a clean surface with no residue.
Custom shapes can be produced to meet your application
in a wide range of materials including polyester, crepe
paper, lead and aluminium foil, glass fibre, magnetic
strip, and rubber sheeting offering temperatures up to
260°C.
They can be supplied with tabs to aid removal, in kit form
or individually on a transfer liner. And should you require
only one shape to a large production run that
is no problem.
Die cut shapes can speed up the masking operation
eliminating the need and potential dangers of sharp
knives on the production line whist product quality is
improved with a shape that gives constant accuracy time
after time.
With no tooling costs Greentree will provide you with
samples within 24 hours and once approved, full
production run within a few days.
Call our Sales Team now on +44 (0)1684 533 800
or e-mail us at [email protected] for
more information or a visit.
Improve productivity
Effective masking on
a flat or curved surface
Wide range of materials
Consistent
product finish
Effective product
quality check
No tooling costs
No minimum order quantity
www.green t ree-eng .co .uk
CUSTOM DIE-CUTS
Aerospace approved materials
40 TAPES
Width (mm)
Width (Imperial)
101EPart No.
201EPart No.
250Part No.
1104Part No.
KD11Part No.
4330Part No.
501EPart No.
SATPart No.
2595Part No.
5.00 KD11-5MM
6.35 1/4" KD11-0250
6.00 2595-6MM-H
9.53 3/8" KD11-0375
10.00 KD11-10MM GTE4330-10MM
12.00 GTE4330-12MM 501E-12MM 2595-12MM-H
12.70 1/2" KD11-0500 SAT-0500
15.00 KD11-15MM
18.00 101E-18MM
19.05 3/4" KD11-0750 SAT-0750
20.00 KD11-20MM
24.00 101E-24MM 1104-24MM 501E-24MM
25.00 201E-25MM KD11-25MM GTE4330-25MM 2595-25MM-H
25.40 1" 250-1000 KD11-1000 SAT-1000
30.00 KD11-30MM
36.00 101E-36MM 201E-36MM 501E-36MM
38.00
38.10 1 1/2" KD11-1500
40.00 KD11-40MM
45.00 KD11-45MM
48.00 101E-48MM 1104-48MM 501E-48MM
50.00 201E-50MM KD11-50MM GTE4330-50MM 2595-50MM-H
50.80 2" KD11-2000 SAT-2000
72.00 101E-72MM 1104-72MM
75.00
76.20 3" KD11-3000
80.00 KD11-80MM
100.00 KD11-100MM
101.60 4" KD11-4000
150.00 KD11-150MM
152.40 6" KD11-6000
60ºC 80ºC 120ºC 135ºC
Greentree supply a broad range of masking and associated tapes for varied applications.
These tapes are available in a variety of standard and custom widths and many can be supplied in standard die-cut shapes such as discs or squares.
APPLICATIONTapes should be applied to clean surfaces, firmly pressing into place to ensure good overall adhesion. Removal should be as soon as possible to leave a residue free surface.
STORAGEAlways rotate stock.
Do not crush. Storage temperature 13°C - 30°C
Full technical information and MSDS available. REACH compliant.
101E - 60°C
General purpose paper masking tape for holding, bundling, sealing and non-critical masking
Rubber resin adhesive
Aerospace approved
201E - 80°C
General purpose paper masking tape for short term paint masking, paper aproning and fixing, bundling, holding and sealing
Rubber resin adhesive
Te l :+44 (0 )1684 533800
PAPER TAPES
SAMPLES AVAILABLE
TAPES 41
Width (mm)
Width (Imperial)
101EPart No.
201EPart No.
250Part No.
1104Part No.
KD11Part No.
4330Part No.
501EPart No.
SATPart No.
2595Part No.
5.00 KD11-5MM
6.35 1/4" KD11-0250
6.00 2595-6MM-H
9.53 3/8" KD11-0375
10.00 KD11-10MM GTE4330-10MM
12.00 GTE4330-12MM 501E-12MM 2595-12MM-H
12.70 1/2" KD11-0500 SAT-0500
15.00 KD11-15MM
18.00 101E-18MM
19.05 3/4" KD11-0750 SAT-0750
20.00 KD11-20MM
24.00 101E-24MM 1104-24MM 501E-24MM
25.00 201E-25MM KD11-25MM GTE4330-25MM 2595-25MM-H
25.40 1" 250-1000 KD11-1000 SAT-1000
30.00 KD11-30MM
36.00 101E-36MM 201E-36MM 501E-36MM
38.00
38.10 1 1/2" KD11-1500
40.00 KD11-40MM
45.00 KD11-45MM
48.00 101E-48MM 1104-48MM 501E-48MM
50.00 201E-50MM KD11-50MM GTE4330-50MM 2595-50MM-H
50.80 2" KD11-2000 SAT-2000
72.00 101E-72MM 1104-72MM
75.00
76.20 3" KD11-3000
80.00 KD11-80MM
100.00 KD11-100MM
101.60 4" KD11-4000
150.00 KD11-150MM
152.40 6" KD11-6000
150ºC 160ºC 160ºC 180ºC 200ºC
www.green t ree-eng .co .uk
PAPER TAPES
250 - 120°C
Paint test adhesion tape
Rubber adhesive
Aerospace approved
1104 - 135°C
Paper tape for applications on sensitive materials which require a low tack tape
Rubber resin adhesive
KD11 - 150°C
A high temperature, pressure sensitive paper masking tape designed for clean removal.
Acrylic adhesive
Aerospace approved
Die-cuts available
Available in custom widths
4330 - 160°C
A finely creped, flexible, wet resistant masking tape with a high tensile strength
Natural rubber adhesive
Aerospace approved
501E - 160°C
A high temperature paper tape designed to withstand single or repeat bake cycles at temperatures up to 170°C
Rubber resin adhesive
Aerospace approved
SAT - 180°C
A high temperature paper tape with a pressure-sensitive adhesive
Natural rubber adhesive
2595 - 200°C
A high temperature semi crepe paper tape ideal for use in paint stoving cycles
Silicone adhesive
Die-cuts available
Recommended for powder coating, e-coating and anodising
Clean removal with no adhesive residue
Imperial and metric sizes available
Any size cut to your requirement
No tooling charges
No minimum order quantity
Also available as roll tape (Page 34/35)
Available with tab to aid removal; perforations for alignment; printing for operator positioning
Resistant to chemicals
Thickness for PC21, PC90, PC11 - 2mm polyester. #22 1.5mm thickness - silicone
42 DISCS
Size Discs Per Roll PC21Part No.Metric (mm)
3.00 2000 1-PC21-DSC-3
4.00 2000 1-PC21-DSC-4
5.00 2000 1-PC21-DSC-5
6.00 2000 PC006MM-P*
7.00 2000 PC007MM-P*
8.00 2000 PC008MM-P*
9.00 2000 1-PC21-DSC-9
10.00 2000 1-PC21-DSC-10
11.00 2000 1-PC21-DSC-11
12.00 2000 PC012MM-P*
13.00 2000 1-PC21-DSC-13
14.00 2000 PC014MM-P*
15.00 2000 PC015MM-P*
16.00 2000 PC016MM-P*
17.00 1000 1-PC21-DSC-17
18.00 1000 PC018MM-P*
19.00 1000 PC019MM-P*
20.00 1000 PC020MM-P*
21.00 1000 1-PC21-DSC-21
22.00 500 PC022MM-P*
23.00 500 PC023MM-P*
24.00 500 1-PC21-DSC-24
25.00 500 PC025MM-P*
30.00 500 PC030MM-P*
32.00 250 PC032MM-P*
35.00 250 1-PC21-DSC-35
36.00 250 PC036MM-P*
38.10 250 PC01500-P*
40.00 250 1-PC21-DSC-40
45.00 250 1-PC21-DSC-45
50.00 250 PC050MM-P*
55.00 250 1-PC21-DSC-55
57.15 250 PC02250-P*
60.00 250 1-PC21-DSC-60
63.50 250 PC02500-P*
65.00 250 1-PC21-DSC-65
70.00 250 1-PC21-DSC-70
75.00 100 1-PC21-DSC-75
80.00 100 1-PC21-DSC-80
85.00 100 1-PC21-DSC-85
90.00 100 1-PC21-DSC-90
95.00 100 1-PC21-DSC-95
100.00 100 1-PC21-DSC-100
110.00 100 1-PC21-DSC-110
120.00 100 1-PC21-DSC-120
130.00 100 1-PC21-DSC-130
140.00 100 1-PC21-DSC-140
150.00 100 1-PC21-DSC-150
220ºC
HIGH TEMPERATURE DISCS
Te l :+44 (0 )1684 533800
* Alignment rings (P) aid accurate centering over hole.
These sizes are also available without Alignment Rings.
CUSTOM SIZES AVAILABLECALL FOR PRICING
SAMPLES AVAILABLE
DISCS 43
Size Discs Per Roll PC21Part No.Metric (mm)
3.00 2000 1-PC21-DSC-3
4.00 2000 1-PC21-DSC-4
5.00 2000 1-PC21-DSC-5
6.00 2000 PC006MM-P*
7.00 2000 PC007MM-P*
8.00 2000 PC008MM-P*
9.00 2000 1-PC21-DSC-9
10.00 2000 1-PC21-DSC-10
11.00 2000 1-PC21-DSC-11
12.00 2000 PC012MM-P*
13.00 2000 1-PC21-DSC-13
14.00 2000 PC014MM-P*
15.00 2000 PC015MM-P*
16.00 2000 PC016MM-P*
17.00 1000 1-PC21-DSC-17
18.00 1000 PC018MM-P*
19.00 1000 PC019MM-P*
20.00 1000 PC020MM-P*
21.00 1000 1-PC21-DSC-21
22.00 500 PC022MM-P*
23.00 500 PC023MM-P*
24.00 500 1-PC21-DSC-24
25.00 500 PC025MM-P*
30.00 500 PC030MM-P*
32.00 250 PC032MM-P*
35.00 250 1-PC21-DSC-35
36.00 250 PC036MM-P*
38.10 250 PC01500-P*
40.00 250 1-PC21-DSC-40
45.00 250 1-PC21-DSC-45
50.00 250 PC050MM-P*
55.00 250 1-PC21-DSC-55
57.15 250 PC02250-P*
60.00 250 1-PC21-DSC-60
63.50 250 PC02500-P*
65.00 250 1-PC21-DSC-65
70.00 250 1-PC21-DSC-70
75.00 100 1-PC21-DSC-75
80.00 100 1-PC21-DSC-80
85.00 100 1-PC21-DSC-85
90.00 100 1-PC21-DSC-90
95.00 100 1-PC21-DSC-95
100.00 100 1-PC21-DSC-100
110.00 100 1-PC21-DSC-110
120.00 100 1-PC21-DSC-120
130.00 100 1-PC21-DSC-130
140.00 100 1-PC21-DSC-140
150.00 100 1-PC21-DSC-150
PC90Part No.
PC11Part No.
Polyimide Part No.
1-PC90-DSC-3 1-PC11-DSC-3 1-22-DSC-3
1-PC90-DSC-4 1-PC11-DSC-4 1-22-DSC-4
1-PC90-DSC-5 1-PC11-DSC-5 1-22-DSC-5
1-PC90-DSC-6 1-PC11-DSC-6 1-22-DSC-6
1-PC90-DSC-7 1-PC11-DSC-7 1-22-DSC-7
1-PC90-DSC-8 1-PC11-DSC-8 1-22-DSC-8
1-PC90-DSC-9 1-PC11-DSC-9 1-22-DSC-9
1-PC90-DSC-10 1-PC11-DSC-10 1-22-DSC-10
1-PC90-DSC-11 1-PC11-DSC-11 1-22-DSC-11
1-PC90-DSC-12 1-PC11-DSC-12 1-22-DSC-12
1-PC90-DSC-13 1-PC11-DSC-13 1-22-DSC-13
1-PC90-DSC-14 1-PC11-DSC-14 1-22-DSC-14
1-PC90-DSC-15 1-PC11-DSC-15 1-22-DSC-15
1-PC90-DSC-16 1-PC11-DSC-16 1-22-DSC-16
1-PC90-DSC-17 1-PC11-DSC-17 1-22-DSC-17
1-PC90-DSC-18 1-PC11-DSC-18 1-22-DSC-18
1-PC90-DSC-19 1-PC11-DSC-19 1-22-DSC-19
1-PC90-DSC-20 1-PC11-DSC-20 1-22-DSC-20
1-PC90-DSC-21 1-PC11-DSC-21 1-22-DSC-21
1-PC90-DSC-22 1-PC11-DSC-22 1-22-DSC-22
1-PC90-DSC-23 1-PC11-DSC-23 1-22-DSC-23
1-PC90-DSC-24 1-PC11-DSC-24 1-22-DSC-24
1-PC90-DSC-25 1-PC11-DSC-25 1-22-DSC-25
1-PC90-DSC-30 1-PC11-DSC-30 1-22-DSC-30
1-PC90-DSC-32 1-PC11-DSC-32 1-22-DSC-32
1-PC90-DSC-35 1-PC11-DSC-35 1-22-DSC-35
1-PC90-DSC-36 1-PC11-DSC-36 1-22-DSC-36
1-PC90-DSC-38.1 1-PC11-DSC-38.1 1-22-DSC-38.1
1-PC90-DSC-40 1-PC11-DSC-40 1-22-DSC-40
1-PC90-DSC-45 1-PC11-DSC-45 1-22-DSC-45
1-PC90-DSC-50 1-PC11-DSC-50 1-22-DSC-50
1-PC90-DSC-55 1-PC11-DSC-55 1-22-DSC-55
1-PC90-DSC-57.15 1-PC11-DSC-57.15 1-22-DSC-57.15
1-PC90-DSC-60 1-PC11-DSC-60 1-22-DSC-60
1-PC90-DSC-63.5 1-PC11-DSC-63.5 1-22-DSC-63.15
1-PC90-DSC-65 1-PC11-DSC-65 1-22-DSC-65
1-PC90-DSC-70 1-PC11-DSC-70 1-22-DSC-70
1-PC90-DSC-75 1-PC11-DSC-75 1-22-DSC-75
1-PC90-DSC-80 1-PC11-DSC-80 1-22-DSC-80
1-PC90-DSC-85 1-PC11-DSC-85 1-22-DSC-85
1-PC90-DSC-90 1-PC11-DSC-90 1-22-DSC-90
1-PC90-DSC-95 1-PC11-DSC-95 1-22-DSC-95
1-PC90-DSC-100 1-PC11-DSC-100 1-22-DSC-100
1-PC90-DSC-110 1-PC11-DSC-110 1-22-DSC-110
1-PC90-DSC-120 1-PC11-DSC-120 1-22-DSC-120
1-PC90-DSC-130 1-PC11-DSC-130 1-22-DSC-130
1-PC90-DSC-140 1-PC11-DSC-140 1-22-DSC-140
1-PC90-DSC-150 1-PC11-DSC-150 1-22-DSC-150
220ºC 230ºC 260ºC
This is just a small selection of the sizes of standard discs available from stock. We can cut any diameter you require with no tooling costs.
Custom design to your requirement
Aerospace approved materials
HIGH TEMPERATURE DISCS
www.green t ree-eng .co .uk
High quality, high heat resistance
Wide variety of applications
Pressure sensitive paper with acrylic adhesive designed for clean removal.
Metric and imperial sizes available
Aerospace approved
Also available as roll tape (Page 40/41)
Available as custom die-cut shapes
44 DISCS
Part Number Size(mm)
QuantityPer Roll
1-KD11-DSC-3 3.0 5000
1-KD11-DSC-4 4.0 5000
1-KD11-DSC-5 5.0 5000
1-KD11-DSC-6 6.0 5000
1-KD11-DSC-7 7.0 5000
1-KD11-DSC-8 8.0 5000
1-KD11-DSC-9 9.0 5000
1-KD11-DSC-10 10.0 5000
1-KD11-DSC-11 11.0 5000
1-KD11-DSC-12 12.0 5000
1-KD11-DSC-13 13.0 5000
1-KD11-DSC-14 14.0 5000
1-KD11-DSC-15 15.0 5000
1-KD11-DSC-16 16.0 5000
1-KD11-DSC-17 17.0 5000
1-KD11-DSC-18 18.0 5000
1-KD11-DSC-19 19.0 5000
1-KD11-DSC-20 20.0 5000
1-KD11-DSC-21 21.0 5000
1-KD11-DSC-22 22.0 2000
1-KD11-DSC-23 23.0 2000
1-KD11-DSC-24 24.0 2000
1-KD11-DSC-25 25.0 2000
1-KD11-DSC-30 30.0 2000
1-KD11-DSC-35 35.0 2000
1-KD11-DSC-40 40.0 2000
1-KD11-DSC-45 45.0 2000
1-KD11-DSC-50 50.0 500
1-KD11-DSC-55 55.0 500
1-KD11-DSC-60 60.0 500
1-KD11-DSC-65 65.0 500
1-KD11-DSC-70 70.0 500
1-KD11-DSC-75 75.0 500
1-KD11-DSC-80 80.0 500
1-KD11-DSC-85 85.0 500
1-KD11-DSC-90 90.0 500
1-KD11-DSC-95 95.0 500
1-KD11-DSC-100 100.0 250
1-KD11-DSC-110 110.0 250
1-KD11-DSC-120 120.0 250
1-KD11-DSC-130 130.0 250
1-KD11-DSC-140 140.0 250
1-KD11-DSC-150 150.0 250
KWIKY DOT™DISCS 150°C
Te l :+44 (0 )1684 533800
CUSTOM SIZESAVAILABLE
SAMPLES AVAILABLE
DISCS 45
Recommended for thermal spray, high-temp powder coating and shot blasting
Resistant to high-pressure blasting
Excellent resistance to solvents and abrasion
Flame retardant silicone adhesive
High tensile strength
Metric and imperial sizes available
Also available as roll tape (page 36)
Available as custom die-cut shapes
Part Number Size(mm)
QuantityPer Roll
1-PC198-DSC-3 3.0 2000
1-PC198-DSC-4 4.0 2000
1-PC198-DSC-5 5.0 2000
1-PC198-DSC-6 6.0 2000
1-PC198-DSC-7 7.0 2000
1-PC198-DSC-8 8.0 2000
1-PC198-DSC-9 9.0 2000
1-PC198-DSC-10 10.0 2000
1-PC198-DSC-11 11.0 2000
1-PC198-DSC-12 12.0 2000
1-PC198-DSC-13 13.0 2000
1-PC198-DSC-14 14.0 2000
1-PC198-DSC-15 15.0 2000
1-PC198-DSC-16 16.0 2000
1-PC198-DSC-17 17.0 1000
1-PC198-DSC-18 18.0 1000
1-PC198-DSC-19 19.0 1000
1-PC198-DSC-20 20.0 1000
1-PC198-DSC-21 21.0 1000
1-PC198-DSC-22 22.0 500
1-PC198-DSC-23 23.0 500
1-PC198-DSC-24 24.0 500
1-PC198-DSC-25 25.0 500
1-PC198-DSC-30 30.0 500
1-PC198-DSC-35 35.0 250
1-PC198-DSC-40 40.0 250
1-PC198-DSC-45 45.0 250
1-PC198-DSC-50 50.0 250
For more specialist thermal and plasma applications we offer a range of
high performance tapes in different formats.
Aerospace approved, they are available in different widths and as custom die cuts.
GLASS CLOTH DISCS260°C
www.green t ree-eng .co .uk
CUSTOM SIZESAVAILABLE
46 Te l :+44 (0 )1684 533800
Netting
Slitting Converting
Die-cut Shapes
StarterKits
Kwiky-Mask
SheetingCustomDesign
Rubber CompressionMoulding
Tapes
VinylDip-Moulding
GREENTREE… INNOVATION
SAMPLES AVAILABLE
Injection Moulding
HOOKS 47
Greentree manufacture an extensive range of standard off-the-shelf hooks for next day delivery.
If you have a particular application requiring a special design call our sales engineering team on 01684 533800 or e-mail: [email protected]
Copper coated mild steel
Also available in sprung steel
Weight tested and certification available
V-HOOK
C-HOOK
CV-HOOK
S-HOOK
SPIN HOOKS
MINI HOOK
SPRING HOOKS
www.green t ree-eng .co .uk
HOOKS
See page 49 See page 49
See page 49 See page 49
See page 51
See page 51
See page 50
48 HOOKS
This load data was compiled under static load conditions in a laboratory and is given for reference only.
The actual dynamic load capacity will vary. It is the Customer’s responsibility to determine whether the actual dynamic load capacity is suitable for their purpose.
6.0
4.0
3.0
2.0
1.5
1.2
Wire
Dia
met
er (m
m)
75kg
50kg
19kg
6.3kg
4.4kg
1.8kg
HOOK LOAD CHART: V-HOOKS
6.0
4.0
3.0
2.0
1.5
1.2
Wire
Dia
met
er (m
m)
HOOK LOAD CHART: C-,S-,CV HOOKS
65.8kg
26.7kg
12.7kg
7.3kg
3.1kg
0.5kg
HOOK LOAD CHART
Te l :+44 (0 )1684 533800SAMPLES AVAILABLE
STANDARD HOOKS
Length(mm)
Wire Diameter(mm)
QuantityPer Box
50 All are Available as:
1.2
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10.0
1000
75 1000
100 1000
150 1000
200 1000
250 1000
300 1000
350 1000
400 1000
450 1000
500 1000
550 1000
600 500
700 500
800 500
900 500
1000 500
HOOKS 49
Manufactured from copper coated wire, mild, or sprung steel
Plain, 90º, or S Hook
Custom designs available
Manufactured in the UK
Large stocks available for immediate delivery
V-HOOKS, S-HOOKS, C-HOOKS AND CV-HOOKS
www.green t ree-eng .co .uk
Low cost solution to increase powder-coating capacity
Rotate part/rack
Ball bearing construction
Durable
Load capacity 90kg
Part NumberUWC-1
Part NumberUWV-1
50 HOOKS
Part NumberLength Height
inches mm inches mm
SB-24 24 609.60 1.26 32.00
SB-36 36 914.40 1.26 32.00
SB-48 48 1219.20 1.26 32.00
Can be used with a Modular Rack or with your existing paintline
Perfect contact every time
Hooks lock into position
Can be used with standard C-Hooks
SMART BAR™
SPIN HOOKS
Te l :+44 (0 )1684 533800SAMPLES AVAILABLE
HOOKS 51
Product Code
Length(mm)
Wire Diameter(mm)
Quantity per box
C5-1.5-55-00-M 55 1.5 5000
C5-1.5-75-00-M 75 1.5 5000
C5-1.5-135-00-M 135 1.5 5000
Manufactured from high quality spring steel wire to BS5216
For use when coating tubes or similar items where there is limited hanging purchase
Leaves no mark on the surface to be coated
Reusable, maintaining their spring integrity for many cycles, whilst giving a good firm grip on the component
Manufactured from copper coated wire 12mm internal diameter ends Reusable
PartNumber
Wire Diameter(mm)
Length A(mm)
Width B(mm) +/- 5mm
Quantity per box
HOOK-SH1 1.00 60.00 34.00 500
HOOK-SH2 2.00 105.00 120.00 200
HOOK-SH3 3.00 110.00 125.00 200
TUBE SPRING HOOKS
www.green t ree-eng .co .uk
MINI HOOKS
Te l :+44 (0 )1684 533800
MATERIALS, QUALITY AND STANDARDSGreentree can supply tapes and die-cut shapes from an extensive range of materials produced by some of the world’s leading manufacturers (including Caplugs, 3M, Tesa). Together with our own in-house manufacturing and rubber compounding facilities we offer an extensive range of solutions to masking and protection problems. These can come in a variety of forms such as tubing, sheeting, edging strips, foils, foams, ‘O’ rings, seals and extrusions, often providing an ‘off the shelf’ alternative solution to masking or protecting problems.
ENGINEERING SOLUTIONS TEAMThey’re not just the Engineering Solutions Team. They’re your Engineering Solutions Team. A hand-picked, experienced group of mechanical, industrial and chemical engineers, who have created innovative, cost-effective solutions to problems for almost every imaginable industry.
CUSTOM MOULD PROCESSOur custom mould process ensures you will receive a quality engineered solution.
ConceptCustom moulded masks require custom tooling - but not until our design engineers have evaluated the problem and presented a clear, creative solution for your evaluation.
Rapid PrototypeAt the concept stage, we can supply a rapid prototype so you can evaluate the proposed solution. These rapid prototypes can be generated in days.
Drawing ApprovalOnce you are happy with the custom mould design, we will provide an Engineering drawing before we manufacture any tooling. The drawing will detail the standards and tolerances we will be working to for your custom mould.
First ArticlesThe next step is for us to provide you with first article pieces of your custom mould. These can be tested right on your production line.
ProductionWhen you approve the first articles, we move into production. In our state-of-the-art facility, we custom-mix every mask compound from our extensive recipe database, and mould masks to the highest quality standards in the industry.
Greentree custom moulds save time and money!
STANDARDS, QUALITY AND SERVICE
52 STANDARDS, QUALITY AND SERVICE SAMPLES AVAILABLE
THREAD SIZE
315°C (Silicone)260°C (Flex 500)
177°C (EPDM/N
eoprene)121°C (NBR)
177°C (Vinyl)
DFPPHFPP
UTMST
HTPHETV
HVTPPP
BNGN
FPTP
VTPETV
STPS
M2x.04
PP
08B
N99
GN
99
M2.5x.045
HTP
-4P
P10
BN
99G
N99
TP-4
2-56 UNCP
P10
BN
99G
N99
STPS-2
2-64 UNFP
P10
BN
99G
N99
TP-4
STPS-2
M3x.05
ST0093H
TP-4
PP
11B
N100
GN
100TP
-4
3-48 UNCST0093
HTP
-4P
P11
BN
100G
N100
TP-4
STPS-3
3-56 UNFH
TP-4
PP
11B
N100
GN
100TP
-4STP
S-3
4-40 UNCH
TP-4
PP
11AB
N101
GN
101TP
-4STP
S-4
4-48 UNFH
TP-4
PP
11AB
N101
GN
101TP
-4STP
S-4
5-40 UNCH
TP-4
PP
11AB
N101
GN
101TP
-4
5-44 UNFH
TP-4
PP
11AB
N101
GN
101TP
-4
6-32 UNCST0125
HTP
-4P
P14
BN
101G
N101
TP-4
STPS-6
6-40 UNFST0125
HTP
-4P
P14
BN
101G
N101
TP-4
STPS-6
M4x.07
HTP
-4P
P17
BN
101G
N101
TP-4
8-32 UNCST0156
HTP
-4P
P20
BN
102G
N102
TP-4
STPS-8
8-36 UNFST0156
HTP
-4P
P20
BN
102G
N102
TP-4
STPS-8
10-24 UNCST0172
HTP
-6P
P22
BN
102G
N102
FP00250
TP-6
STPS-10
10-32 UNFST0172
HTP
-6P
P22
BN
102G
N102
FP00250
TP-6
STPS-10
M5
HTP
-8P
P23
BN
102G
N102
FP00250
TP-6
12-24 UNCH
FPP
-M6
ST0187H
TP-9
PP
23B
N102
GN
102FP
00250TP
-6STP
S-12
12-28 UNFH
FPP
-M6
ST0187H
TP-10
PP
23B
N102
GN
102FP
00250TP
-6STP
S-12
M6x1
DFP
P-M
6H
FPP
-M6
UTM
-M6*1
HTP
-11H
VTP-05
PP
30B
N103
GN
103FP
00250TP
-8VTP
-05
1/4-20 UNCU
TM-1/4-20
ST0234H
TP-12
HVTP
-05P
P33
BN
103G
N103
FP00250
TP-8
VTP-05
STPS-1/4
1/4-28 UNFST0234
HVTP
-05P
P33
BN
103G
N103
FP00250
TP-8
VTP-05
STPS-1/4
5/16-18 UNCD
FPP
-M8
UTM
-5/16-18ST0281
HVTP
-1P
P40
BN
104G
N104
FP00312
TP-11
VTP-1
STPS-5/16
5/16-20 UND
FPP
-M8
UTM
-5/16-18ST0281
HVTP
-1P
P40
BN
104G
N104
FP00312
TP-11
VTP-1
STPS-5/16
5/16-24 UNFST0281
HVTP
-1P
P42
BN
104G
N104
FP00312
TP-11
VTP-1
STPS-5/16
5/16-28 UNST0281
HVTP
-1P
P42
BN
104G
N104
FP00312
TP-11
VTP-1
STPS-5/16
M8x1.25
DFP
P-M
8U
TM-M
8*1.25H
VTP-1
PP
40B
N104
GN
104FP
00312TP
-11VTP
-1
3/8-16 UNCH
FPP
-M10
UTM
-3/8-16H
VTP-2
PP
43B
N104
GN
104FP
00406TP
-12VTP
-2STP
S-3/8
3/8-20 UND
FPP
-M10
HFP
P-M
10U
TM-M
10*1.5H
VTP-2
PP
43B
N104
GN
104FP
00406TP
-12VTP
-2STP
S-3/8
3/8-24 UNFD
FPP
-M10
HFP
P-M
10U
TM-7/16-14
HVTP
-2P
P50
BN
104G
N104
FP00406
TP-12
VTP-2
STPS-3/8
3/8-28 UND
FPP
-M10
UTM
-7/16-14H
VTP-2
PP
50B
N104
GN
104FP
00406VTP
-2STP
S-3/8
M10x1.25
DFP
P-M
10U
TM-M
10*1.5ST0375
HVTP
-2P
P55
BN
104G
N104
FP00406
VTP-2
7/16-14 UNCU
TM-7/16-14
ST0406H
VTP-25
PP
60B
N000
GN
000FP
00406VTP
-25
7/16-16 UNU
TM-7/16-14
ST0406H
VTP-25
PP
60B
N000
GN
000FP
00406VTP
-25
7/16-20 UNFH
FPP
-M12
UTM
-M12*1.75
ST0406H
VTP-25
PP
60B
N000
GN
000FP
00468VTP
-25
7/16-32 UND
FPP
-M12
HFP
P-M
12U
TM-M
12*1.75ST0406
HETV-4
HVTP
-25P
P66
BN
000G
N000
FP00468
VTP-25
ETV-4
1/2-13 UNCD
FPP
-M12
UTM
-1/2-13H
ETV-4H
VTP-3
PP
67B
N000
GN
000FP
00468VTP
-3ETV-4
STPS-1/2
1/2-16 UNU
TM-1/2-13
HETV-5
HVTP
-3P
P67
BN
000G
N000
FP00468
VTP-3
ETV-5STP
S-1/2
1/2-20 UNFH
ETV-5H
VTP-3
PP
70B
N000
GN
000FP
00468VTP
-3ETV-5
STPS-1/2
1/2-32 UNH
ETV-5H
VTP-3
PP
70B
N000
GN
000FP
00562VTP
-3ETV-5
STPS-1/2
M12x1.25
DFP
P-M
12U
TM-M
12*1.75H
ETV-4H
VTP-3
PP
66B
N000
GN
000FP
00468VTP
-3ETV-4
M14x1.5
HETV-5
HVTP
-3P
P73
BN
108G
N108
FP00562
VTP-3
ETV-5
M15
DFP
P-M
16U
TM-M
16*2H
ETV-6H
VTP-35
PP
85B
N109
GN
109FP
00562VTP
-35ETV-6
5/8-11 UNCD
FPP
-M16
UTM
-M16*2
HETV-6
HVTP
-35P
P85
BN
109G
N109
FP00625
VTP-4
ETV-6
M16x1.5
DFP
P-M
16U
TM-M
16*2P
P89
BN
109G
N109
FP00625
M17x1
HFP
P-M
20ST0625
HVTP
-4P
P90
BN
110G
N110
FP00718
VTP-4
M18x1.5
DFP
P-M
20H
FPP
-M20
UTM
-M20*2.5
PP
95B
N110
GN
110FP
00718
M20
DFP
P-M
20H
ETV-8H
VTP-4
PP
100B
N111
GN
111FP
00787ETV-8
M22
P110
BN
112G
N112
FP00866
M24
HETV-10
HVTP
-55P
P110
BN
114G
N114
FP00945
VTP-55
ETV-10
M25
BN
114G
N114
FP00945
M27
HETV-12
PP
120B
N116
GN
116FP
01024ETV-12
M30
BN
118G
N118
FP01102
PLUGS FOR TH
READED HOLES (CON
TINU
ED)
THREAD SIZE
315°C (Silicone)
SCTS
UPUPH
MSP
UHCPSPP
UFPUW
UWPP
UWPPLS
SFCSFP
WC
HWP
M2x.04
SC70UP99-04
UP99-HM
SP101LSPP08
M2.5x.045
SC93UP99-04
UP99-HM
SP101LSPP10
UWPP-M
3
2-56 UNCSC70
UP99-04UP99-H
MSP101L
SPP10
2-64 UNFSC70
UP99-04UP99-H
MSP101L
SPP10
M3x.05
SC109UP100-04
UP100-HM
SP101LSPP11
UW-M
3UW
PP-M4LS
3-48 UNCSC93
UP100-04UP100-H
MSP101L
SPP11UW
PP-M3
3-56 UNFSC93
UP100-04UP100-H
MSP101L
SPP11UW
PP-M3
4-40 UNCSC100
UP101-04UP101-H
MSP101L
SPP11AUW
380UW
PP-M3
4-48 UNFSC100
UP101-04UP101-H
MSP101L
SPP11A
5-40 UNCSC109
UP101-04UP101-H
MSP101L
SPP11AUW
380UW
PP-M4LS
HWP-0330
5-44 UNFSC109
UP101-04UP101-H
MSP101L
SPP11AUW
380UW
PP-M4LS
HWP-0330
6-32 UNCSC125
UP101-04UP101-H
MSP101L
SPP14UW
405UW
PP-M4
UWPP-M
4LSHW
P-0330
6-40 UNFSC125
UP101-04UP101-H
MSP101L
SPP14UW
405UW
PP-M4
UWPP-M
4LSHW
P-0330
M4x.07
SC125TS-00
UP101-04UP101-H
MSP101L
SPP17UW
-M4
UWPP-500
UWPP-M
4LSHW
P-0330
8-32 UNCSC156
TS-00UP102-04
UP102-HM
SP102LSPP20
UW400
UWPP-500
UWPP-500LS
SFC-157-19HW
P-0330
8-36 UNFSC156
TS-00UP102-04
UP102-HM
SP102LSPP20
UW400
UWPP-M
5UW
PP-500LSSFC-157-19
HWP-0330
10-24 UNCSC172
TS-00UP102-04
UP102-HM
SP102LSPP22
UFP00250UW
-M5
UWPP-M
5UW
PP-500LSHW
P-0330
10-32 UNFSC172
TS-00UP102-04
UP102-HM
SP102LSPP22
UFP00250UW
-M5
UWPP-562
UWPP-562LS
HWP-0330
M5
SC180TS-00
UP102-04UP102-H
MSP102L
SPP23UFP00250
UW-M
5UW
PP-562UW
PP-562LSHW
P-0330
12-24 UNCSC187
TS-00UP102-04
UP102-HM
SP102LSPP23
UFP00250UW
-M6
UWPP-M
6UW
PP-562LSSFC-187-22
HWP-0330
12-28 UNFSC187
TS-0UP102-04
UP102-HM
SP102LSPP23
UFP00250UW
-M6
UWPP-M
6UW
PP-562LSSFC-187-22
HWP-0330
M6x1
SC223TS-0
UP103-04UP103-H
MSP103L
SPP30UFP00250
UW-M
6UW
PP-625UW
PP-M6LS
WC027-012
HWP-0330
1/4-20 UNCSC234
TS-0UP103-04
UP103-HM
SP103LUHCP-1
SPP33UFP00250
UW420
UWPP-625
UWPP-M
6LSSFC-234-32
WC027-012
HWP-0330
1/4-28 UNFSC234
TS-0UP103-04
UP103-HM
SP103LUHCP-1
SPP33UFP00250
UW420
UWPP-M
8SFC-234-32
WC125-0500
HWP-0330
5/16-18 UNCSC281
TS-1UP104-04
UP104-HM
SP104LUHCP-1
SPP40UFP00312
UW-M
8UW
PP-M8
WC125-0500
HWP-0450
5/16-20 UNSC281
TS-1UP104-04
UP104-HM
SP104LUHCP-1
SPP40UFP00312
UW-M
8UW
PP-688SFP-M
8W
C046-015HW
P-0450
5/16-24 UNFSC281
TS-1UP104-04
UP104-HM
SP104LUHCP-1
SPP42UFP00312
UW-M
8UW
PP-688SFP-M
8W
C046-015HW
P-0450
5/16-28 UNSC281
TS-1UP104-04
UP104-HM
SP104LUHCP-1
SPP42UFP00312
UW-M
8SFP-M
8W
C046-015HW
P-0450
M8x1.25
SC295TS-1
UP104-04UP104-H
MSP104L
UHCP-1SPP40
UFP00312UW
-M8
UWPP-688
SFC-294-21SFP-M
8W
C046-015HW
P-0450
3/8-16 UNCSC355
TS-2UP104-04
UP104-HM
SP104LUHCP-1
SPP43UFP00406
UW-M
8UW
PP-M10
SFP-M10
WC046-015
HWP-0500
3/8-20 UNSC355
TS-2UP104-04
UP104-HM
SP104LUHCP-1
SPP43UFP00406
UW-M
8UW
PP-922SFP-M
10W
C056-015HW
P-0500
3/8-24 UNFSC355
TS-2UP104-04
UP104-HM
SP104LUHCP-1
SPP50UFP00406
UW-M
8UW
PP-922SFP-M
10W
C056-015HW
P-0500
3/8-28 UNSC355
TS-2UP104-04
UP104-HM
SP104LUHCP-1
SPP50UFP00406
UW-M
8UW
PP-922SFP-M
10W
C075-018HW
P-0500
M10x1.25
SC375TS-2
UP104-04UP104-H
MSP104L
UHCP-1SPP55
UFP00406UW
-M10
UWPP-M
12SFC-375-23
SFP-M10
WC075-018
HWP-0500
7/16-14 UNCSC406
TS-3UP000-04
UP104-HM
SP105LUHCP-1
SPP60UFP00406
UW-M
10UW
PP-M12
SFP-M12
WC075-018
HWP-0500
7/16-16 UNSC406
TS-3UP000-04
MSP105L
UHCP-1SPP60
UFP00406UW
-M10
UWPP-1060
SFP-M12
WC075-018
HWP-0500
7/16-20 UNFSC406
TS-3UP000-04
MSP105L
UHCP-1SPP60
UFP00468UW
-M10
UWPP-1060
SFP-M12
WC075-018
HWP-0500
7/16-32 UNSC437
TS-3UP000-04
UP00-HM
SP105LUHCP-1
SPP66UFP00468
UW-M
10UW
PP-1060SFP-M
14W
C075-018HW
P-0800
1/2-13 UNCSC480
TS-4UP000-04
UP00-HM
SP105LUHCP-1
SPP67UFP00468
UW-M
12SFP-M
14W
C095-018HW
P-0800
1/2-16 UNSC480
TS-4UP000-04
UP00-HM
SP105LUHCP-1
SPP67UFP00468
UW-M
12SFP-M
14W
C095-018HW
P-0800
1/2-20 UNFSC480
TS-4UP000-04
UP00-HM
SP105LUHCP-1
SPP70UFP00562
UW-M
12SFP-M
14W
C095-018HW
P-0800
1/2-32 UNSC480
TS-4UP000-04
UP00-HM
SP105LUHCP-1
SPP70UFP00562
UW-M
12SFP-M
14W
C095-018HW
P-0800
M12x1.25
SC456TS-4
UP000-04UP00-H
MSP105L
UHCP-1SPP67
UFP00468UW
-M12
SFP-M14
WC095-018
HWP-0800
M14x1.5
SC535TS-5
UP108-04UP00-H
MSP105L
UHCP-1SPP73
UFP00562SFP-M
14W
C095-018HW
P-0800
M15
SC562TS-6
UP108-04UP0-H
MSP106L
UHCP-1SPP85
UFP00562HW
P-1150
5/8-11 UNCSC600
TS-6UP108-04
UP0-HM
SP106LUHCP-1
SPP85UFP00562
HWP-0800
M16x1.5
SC600TS-6
UP108-04UP0-H
MSP106L
UHCP-2SPP89
UFP00625HW
P-1150
M17x1
SC687TS-7
UP1-04UP0-H
MSP107L
UHCP-2SPP90
UFP00718W
C115-025HW
P-1150
M18x1.5
SC687TS-7
UP1-04UP2-H
MSP107L
UHCP-2SPP95
UFP00718W
C115-025HW
P-1150
M20
SC750TS-9
UP2-04UP2-H
MSP107L
UHCP-2SPP100
UFP00787HW
P-1350
M22
SC812TS-10
UP4-04UP3-H
MSP109L
SPP110UFP00866
WC155-031
HWP-1480
M24
SC875TS-11
UP4-04UP3-H
MSP109L
SPP105UFP00945
HWP-1600
M25
SC970TS-12
UP5-04UP4-H
MSP109L
UFP00945W
C195-038
M27
SC1000TS-13
UP5-04UP4-H
SPP120UFP01024
M30
SC1125TS-14
UP6-04UFP01134
PLUGS FOR TH
READED HOLES
THREAD SIZE
315°C (Silicone)260°C (Flex 500
®)177°C (Vinyl)
SC-SHTS
SFCSFP
WC-SH
STHVC
HEZHFC
VCVFC
M2x.04
SC070TS-00
HVC-72-12VC-72-12
M2.5x.045
SC093TS-00
ST0093HVC-93-12
VC-93-12
2-56 UNCSC070
TS-00ST080
HVC-80-12VC-80-12
2-64 UNFSC070
TS-00ST080
HVC-80-12VC-80-12
M3x.05
SC100TS-00
WC027-012
ST0093HVC-109-12
VC-109-12
3-48 UNCSC093
TS-00ST0093
HVC-93-12VC-93-12
3-56 UNFSC093
TS-00ST0093
HVC-93-12VC-93-12
4-40 UNCSC100
TS-00W
C027-012STO109
HVC-93-12VC-93-12
4-48 UNFSC100
TS-00W
C027-012STO109
HVC-93-12VC-93-12
5-40 UNCSC109
TS-00W
C027-012STO109
HVC-125-16VC-125-16
5-44 UNFSC109
TS-00W
C027-012STO109
HVC-125-16VC-125-16
6-32 UNCSC125
TS-0W
C125-0500ST0125
HVC-125-16VC-125-16
6-40 UNFSC125
TS-0W
C125-0500ST0125
HVC-125-16VC-125-16
M4x.07
SC148TS-0
SFC-157-19W
C037-012STO140
HVC-148-12HFC-140-16
VC-148-12VFC-140-16
8-32 UNCSC156
TS-0SFC-157-19
WC156-0500
ST0156HVC-156-16
HFC-140-16VC-156-16
VFC-140-16
8-36 UNFSC156
TS-0SFC-157-19
WC156-0500
ST0156HVC-156-16
HFC-140-16VC-156-16
VFC-140-16
10-24 UNCSC172
TS-1SFC-157-19
SFP-M8
WC172-0500
ST0172HVC-172-16
HFC-180-16VC-172-16
VFC-180-16
10-32 UNFSC172
TS-1SFC-157-19
SFP-M8
WC172-0500
ST0172HVC-172-16
HFC-180-16VC-172-16
VFC-180-16
M5
SC180TS-1
SFC-187-22SFP-M
8W
C046-015ST0187
HVC-187-16HEZ-187-12
HFC-180-16VC-187-16
VFC-180-16
12-24 UNCSC187
TS-1SFC-187-22
SFP-M8
WC046-015
ST0187HVC-203-16
HEZ-187-12HFC-207-16
VC-203-16VFC-207-16
12-28 UNFSC187
TS-1SFC-187-22
SFP-M8
WC046-015
ST0187HVC-203-16
HEZ-187-12HFC-207-16
VC-203-16VFC-207-16
M6x1
SC223TS-1
SFC-187-22W
C056-015ST0218
HVC-218-16HEZ-215-12
HFC-207-16VC-218-16
VFC-207-16
1/4-20 UNCSC234
TS-1SFC-234-32
WC056-015
ST0234HVC-234-16
HEZ-240-12HFC-240-16
VC-234-16VFC-240-16
1/4-28 UNFSC234
TS-1SFC-234-32
WC056-015
ST0234HVC-234-16
HEZ-240-12HFC-240-16
VC-234-16VFC-240-16
5/16-18 UNCSC281
TS-2SFC-294-21
SFP-M10
WC075-018
ST0281HVC-290-12
HEZ-303-12HFC-302-16
VC-290-12VFC-302-16
5/16-20 UNSC281
TS-2SFC-294-21
SFP-M10
WC075-018
ST0281HVC-290-12
HEZ-303-12HFC-302-16
VC-290-12VFC-302-16
5/16-24 UNFSC281
TS-2SFC-294-21
SFP-M10
WC075-018
ST0281HVC-290-12
HEZ-303-12HFC-302-16
VC-290-12VFC-302-16
5/16-28 UNSC281
TS-2SFC-294-21
SFP-M10
WC075-018
ST0281HVC-290-12
HEZ-303-12HFC-302-16
VC-290-12VFC-302-16
M8x1.25
SC295TS-2
SFC-294-21SFP-M
10W
C075-018ST0281
HVC-290-12HEZ-303-12
HFC-302-16VC-290-12
VFC-302-16
3/8-16 UNCSC355
TS-3SFC-315-16
SFP-M12
ST0343HVC-343-16
HEZ-365-12HFC-365-16
VC-343-16VFC-365-16
3/8-20 UNSC355
TS-3SFC-315-16
SFP-M12
ST0343HVC-343-16
HEZ-365-12HFC-365-16
VC-343-16VFC-365-16
3/8-24 UNFSC355
TS-3SFC-315-16
SFP-M12
ST0343HVC-343-16
HEZ-365-12HFC-365-16
VC-343-16VFC-365-16
3/8-28 UNSC355
TS-3SFC-315-16
SFP-M12
ST0343HVC-343-16
HEZ-365-12HFC-365-16
VC-343-16VFC-365-16
M10x1.25
SC375TS-4
SFC-375-23SFP-M
12W
C095-018ST0375
HVC-375-16HEZ-365-12
HFC-365-16VC-375-16
VFC-365-16
7/16-14 UNCSC406
TS-5SFC-375-23
SFP-M14
ST0406HVC-406-16
HEZ-427-12HFC-427-16
VC-406-16VFC-427-16
7/16-16 UNSC406
TS-5SFC-375-23
SFP-M14
ST0406HVC-406-16
HEZ-427-12HFC-427-16
VC-406-16VFC-427-16
7/16-20 UNFSC406
TS-5SFC-375-23
SFP-M14
ST0406HVC-406-16
HEZ-427-12HFC-427-16
VC-406-16VFC-427-16
7/16-32 UNSC406
TS-5SFC-375-23
SFP-M14
ST0406HVC-406-16
HEZ-427-12HFC-427-16
VC-406-16VFC-427-16
1/2-13 UNCSC480
TS-6SFC-438-15
WC115-025
HVC-460-16HEZ-490-12
HFC-490-16VC-460-16
VFC-490-16
1/2-16 UNSC480
TS-6SFC-438-15
WC115-025
HVC-460-16HEZ-490-12
HFC-490-16VC-460-16
VFC-490-16
1/2-20 UNFSC480
TS-6SFC-438-15
WC115-025
HVC-460-16HEZ-490-12
HFC-490-16VC-460-16
VFC-490-16
1/2-32 UNSC480
TS-6SFC-438-15
WC115-025
HVC-460-16HEZ-490-12
HFC-490-16VC-460-16
VFC-490-16
M12x1.25
SC456TS-5
SFC-438-15W
C115-025ST0437
HVC-437-16HEZ-460-12
HFC-427-16VC-437-16
VFC-427-16
M14x1.5
SC535TS-7
HVC-531-16HEZ-521-12
HFC-521-16VC-531-16
VFC-521-16
M15
SC562TS-7
HVC-562-16HEZ-552-12
HFC-552-16VC-562-16
VFC-552-16
5/8-11 UNCSC600
TS-8SFC-608-19
WC155-031
HVC-600-12HEZ-600-12
HFC-615-16VC-600-12
VFC-615-16
M16x1.5
SC600TS-8
SFC-608-19W
C155-031ST0625
HVC-600-12HEZ-615-12
HFC-615-16VC-600-12
VFC-615-16
M17x1
SC625TS-8
SFC-608-19W
C155-031ST0625
HVC-640-12HEZ-655-12
VC-640-16
M18x1.5
SC687TS-9
SFC-608-19HVC-687-16
HEZ-695-12HFC-677-16
VC-687-16VFC-677-16
M20
SC750TS-11
SFC-608-19W
C195-038ST0750
HVC-750-12HEZ-760-12
VC-750-12
M22
SC812TS-12
HVC-937-16HEZ-835-12
VC-843-16
M24
SC875TS-13
ST0937HVC-937-16
HEZ-922-12VC-937-16
M25
SC970TS-13
ST0937HVC-937-16
VC-937-16
M27
SC1000TS-14
ST01000HEZ-1048-12
M30
SC1125TS-15
ST01125HEZ-1175-12
CAPS FOR THREADED STU
DS
Greentree
Verton House, Alexandra Way,
Tewkesbury, Glos GL20 8NB UK
Telephone: +44 (0)1684 533800
Fax: +44 (0)1684 297005
www.greentree-eng.co.uk
Greentree is the Registered Trademark of Verton Limited
Verton Limited Registered in England: 3106156
Registered Office: Verton House, Alexandra Way, Tewkesbury, Glos GL20 8NB UK
Design & Artwork by Qwertyop.co.uk
With thanks to Tom Rawlinson for photography & proof reading
© Copyright of Verton Ltd
ORDER POLICIESFulfilment / Order Processing Procedures.Upon receipt, we will promptly acknowledge your order via e-mail. It will show which products you purchased, your total cost and shipping details. If you don’t receive your confirmation, you may enquire by e-mail at [email protected]
PAYMENT TERMS Visa / Mastercard Net 28th day of month following invoice date Bacs
RETURN / REFUND POLICY
1. You may return defective products for replacement. A credit will be issued after our Quality Control approves the return.
2. All orders must be returned within 30 days from the date of the invoice.
3. NO ORDERS will be accepted without written agreement from Greentree.
4. A 10% restocking fee may apply for items returned that are not defective. The fee also applies if you order the wrong parts. All items must be in original packaging and show no signs of use.
All product descriptions and illustrations contained in this brochure are for
guidance only and it is recommended that buyers should evaluate the products to
ensure they meet their needs before purchase. If in doubt please ask for technical
assistance. Ultrabake, Flex 500, are Trade Marks of Caplugs Inc.