Greenhouse Accessories Benches Greenhouse … · Shading Options Greenhouse Accessories Greenhouse...

16
© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 Greenhouse Accessories Fixed Features: • Aluminum framework • Any custom size: 12' maximum length 36" standard depth • Metal mesh bench tops • Custom specified leg height; lower heights available for children and the elderly Options: Bench tops: Cedar, Teak, Mahogany, and recycled content black polyethylene bench top options • Custom shapes; octagonal, etc. • Additional under bench supports for heavy plants • Casters available Tiered Features: Aluminum framework Any custom size: 12' maximum length 48" bottom bench depth 24" second tier depth 12" third tier depth Custom specified leg height Metal mes bench tops Maximum of three stacked tiers recommended Options: Bench tops: Cedar, Teak, Mahogany, and recycled content black polyethylene bench top options Multiple heights to accommodate varying plants needs and requirements Casters available Gravel Features: Designed to provide orchids and tropical plants a direct source of humidity Aluminum frame Any custom size: 12' maximum length 36" standard depth Solid bench top insert to hold water and materials Drain plug to release excess/unwanted water Custom specified leg height; lower heights available for children and the elderly Options: Various bench top depths designed for specific plant needs Casters available Benches SI9401

Transcript of Greenhouse Accessories Benches Greenhouse … · Shading Options Greenhouse Accessories Greenhouse...

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories

FixedFeatures: • Aluminum framework • Any custom size: 12' maximum length • 36" standard depth

• Metal mesh bench tops • Custom specified leg height; lower heights available for children and the elderly

Options: • Bench tops: Cedar, Teak, Mahogany, and recycled content black polyethylene bench top options • Custom shapes; octagonal, etc. • Additional under bench supports for heavy plants • Casters available

TieredFeatures:

• Aluminum framework• Any custom size: 12' maximum length

• 48" bottom bench depth • 24" second tier depth • 12" third tier depth • Custom specified leg height • Metal mes bench tops • Maximum of three stacked tiers recommended

Options: • Bench tops: Cedar, Teak, Mahogany, and recycled content black polyethylene bench top options • Multiple heights to accommodate varying plants needs and requirements • Casters available

GravelFeatures: • Designed to provide orchids and tropical plants a direct source of humidity

• Aluminum frame • Any custom size: 12' maximum length • 36" standard depth • Solid bench top insert to hold water and materials

• Drain plug to release excess/unwanted water • Custom specified leg height; lower heights available for children and the elderly

Options: • Various bench top depths designed for specific plant needs • Casters available

BenchesSI9401

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories

SeedlingFeatures: • Solid aluminum frame • Any custom size: 12' maximum length • 36" standard width x 6" deep

• Designed to grow plants directly in unit • Solid recess to house soil for plant growth

• Removable housing for soil/plant rotation

Options: • Custom specified leg heights; lower heights available for children and the elderly • Various bench top depths designed for specific plant needs • Built in trellises for climbing/vining plants • Casters available

PottingFeatures: • Aluminum framework • Custom sizes with 12' maximum length • 36" standard depth • Metal mesh bench top • Potting soil bins • Under counter storage shelves

Options: • Bench tops: Cedar, Teak, and Mahogany • Rolling, under-counter shelves • Electrical allowances • Tool hanging area • Sink and faucet • Upper bench shelving and attached back • Casters available

RollingFeatures:

• Aluminum framework • Custom sizes with 12' maximum length • 36" standard depth

• Metal mesh bench top• Non-ferrous component hardware

Options:• Under bench heating and cooling options

• Bench tops: Cedar, Teak, Mahogany, and recycled content black polyethylene bench top options • Standard and custom configurations

• Stainless steel fasteners• 2-sided rolling operation; 18" roll each direction• Casters available

Benches SI9401

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories Benches SI9401

Shelving

Wood Top

Wood top benches are available as inserts to a metal frame or can be free floating on shelf supports (as shown at left). The slats are constructed of Mahogany wood which resists expansion and rotting.

Metal or Plastic Top

Fixed shelves can also have a metal mesh or recycled-content, black polyethylene top. These materials are open and allow water to flow. All shelves are contained in an aluminum frame.

Glass Top

Glass shelves are commonly used in garden windows or a space that is not a greenhouse. The shelves are custom designed to your dimensions. When stacked, light can travel through the shelves to lower plants.

Supports

• Decorative corners: A cast aluminum element with a decorative style.

• Flat metal support: can be designed to support the shelf from above or underneath the unit.

SI9404

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Plant Hangers

Aluminum Tube Hanger

A fixed aluminum tube runs the length of the greenhouse at eave height. The tube is attached at each bay with a clip and can be painted to match the frame for an additional charge.

Sliding Plant Hanger

A unique system that consists of a metal bar with individual carriers inside the bar. Each carrier has wheels which allow the gardener to slide hanging baskets left and right.

Decorative Corner

Cast aluminum plant hangers with a historically inspired, ornate design. This plant hanger is meant to be noticed and is painted to match the structure’s frame. Each corner typically holds one hanging basket.

Aluminum Truss

This structural support truss is specially designed into the greenhouse frame and can be used as a plant hanger, as they are able to hold heavy plants. Multiple trusses can be designed into greenhouses for large collections of hanging baskets.

Ring and Collar

Ring and collars are a historical accessory often used for decorative and/or structural purposes. They are often accented with an applique, painted to match the frame finish, and can span the width of the greenhouse.

Single Pant Hanger

Individual o-hooks are inserted into the rafter screw track. Each hook holds one hanging basket and does not penetrate or create holes in the frame.

The purpose of a plant hanger is to accommodate hanging baskets and additional growing space.

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories Plant Hangers Grow Lights

Metal Halide

• Promotes plant growth• Blue/White spectrum• 10,000 hour average life-span• Used as a primary light source• Closest look to natural sunlight

High Pressure Sodium

• More fruit and blooms with plants• Red/Orange spectrum• Average of 2400 hour life-span• Used as a light supplement

Switchable

• Can use high pressure sodium or metal halide bulb

• Grow light bulb can be switched to accomodate different plants and growing schedules

• Common wattage: 150, 250, and 400

Grow Lights

• Aide in seed starting• Aide in propagating new plants• Supplement natural light during the

winter months• Increase fruit/bloom productions

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories

Pleated Gravity Fed Shades

These shades can be used on both the roof and walls. When positioned in a roof, the shades will use a Roman fold style. If placed in the wall, the shades can be flat mounted on a roller or Roman fold. This system is typically used on sloped roofs. The shades are mounted to the interior of the glass roof, and a manual pull or motor moves them up and down. Shades are individually sized to fit between each rafter section. Numerous colors and openness are available.

Wide Span Horizontal Shade

This option spans horizontally across the eave of a greenhouse. Shades are mounted directly to the eave. The blinds are designed in a Roman fold style. When extended, they allow heat to be held above the system in the ridge, while the growing space remains cooler. On cool winter days, the shades can be retracted to allow sunlight and heat into the structure. Varying fabrics, types, colors, and openess are available with manual or motorized operations.

Shading Options

Greenhouse Shades

All shades for a greenhouse are built for high moisture areas and are water resistant. The shade materials are also bacteria and fungal resistant. Each type of shade system is suitable for residential and commercial greenhouses. As a rule of thumb, a greenhouse shade should be around 25% open. Lower openesses are suitable for low light plants and orchids.

SI9403

Additional shading options available.

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories Shading Options

Solar Innovations, Inc. in-system skylights are capable of being installed on any structure, including greenhouses, sunrooms, pool enclosures, and conservatories. This type of ventilation is also available on traditionally constructed roofs consisting of shingles or standing seam. Function is similar to a ridge vent, but the skylight has a higher profile. Ridge vents are for structures with pitches not used below 3/12, and the operable skylight can be used on lower pitches. As hot air rises, it becomes trapped in the ridge line. The skylight will open, and release the stagnant air. This system is ideal for shallow pitched roof lines. Skylights can be manually operated or feature a motor. Multiple bays can be synchronized to open at the same time.

• Custom sizes• One to four bays• Durable aluminum frame• Various glass types available• Standard finishes: AAMA 2603

• Duracron: Hartford Green, Bronze, Black, Natural Clay, White and Sandstone

• Custom Finishes• Class I Anodized: Dark Bronze, Clear• Powder coat finish: AAMA 2604-05• Fluorpolymer (50% or 70%): AAMA

2604-2605• Veneer & cladding options• Dual color or dual finish options

Venting Options

For more info, see Section 9.

In-System Skylights

Venting Features:

SI9404

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories

Glass structures need ventilation, be it a greenhouse, conservatory, or pool enclosure. Without proper aeration, the structure will overheat in warm weather. The space essentially becomes a unbearably hot, large glass box, if proper ventilation is not supplied. Both ridge vents and eave vents can be set to automatically open when a specified temperature is reached.

Solar Innovations, Inc. offers two options: ridge and eave vents. As hot air rises, it becomes trapped in the structure’s peak and needs to escape. The ridge vent will open, either manually or motorized and release the air. Ridge vents can be a single bay or feature multiple bays that are all connected.

The eave vents (or sashes) are located on the structure’s walls and will also open. This will allow cool, fresh air to be brought into the structure. The air will circulate through the room and lower the temperature. This will make the room far more comfortable and help to reduce the spread of diseases in greenhouse plants.

Venting Features

• Temperature based operation• Water resistant motors• Units close vents when rain or snow is

detected• Timed and grouped operation of multiple vents

Venting Options

Please see section 9 for additional details.

Ridge and Eave Vents

SI6301 & SI6302

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories

Available Models

• SFT-1200-1 12" (760 C.F.M.) with MIT-1600 16" Motorized Intake

• SFT-1600-1 16" (1250 C.F.M.) with MIT-2000 20" Motorized Intake

• SFT-2000-1 20" (3122 C.F.M.) with MIT-2200 22" Motorized Intake

Available in white vinyl only. Painted finish available for an additional charge.

• Hot air becomes trapped at ridge• Exhaust fans pull hot air outside• Triggered by temperature• Best suited for monolithic glazed

greehouses• PVC shell with aluminum blades• Motorized operation• Lower intakes pull cool air into the

greenhouse• Helps maintain even temperature• Assists in air circulation• Placed opposite exhaust fan• Shutter must be 6” larger than the

fan

Motorized Intakes and Exhaust Fans

** Motorized Intakes and Exhaust Fans require the combination of both units.

Exhaust Fans

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Circulation Fans

Circulation fans are needed in a greenhouse to grow healthy plants. Stagnant air breeds diseases; the use of circulation fans cuts down on the spread of fungi and pests. After watering the leaves of plants, they become moist and combine with warm temperatures, diseases will grow. Circulation fans help to dry plants quicker and reduces pests. A greenhouse can have hot and cold pockets of air that circulation fans help to eliminate by combining all the air inside the space.

Two fans are typically used in a greenhouse and placed in opposite corners (see diagrams below). Various sizes are available depending on greenhouse dimensions.

Features

• Totally enclosed motors• Hanging mount• Framework built for greenhouses and high

moisture enviroments• Optional variable speed controllers• White frame

Available Models Patented Vera-Kool® Air Circulation FanMODEL DIAMETER PERFORMANCE

VK8 8" 448 ccfmVK12 12" 1554 ccfmVK20 20" 4000-4800 CFMVK24 24" 5000-6000 CFM

Typical Fan Pattern

Over 60 feet

36 feetor less

Over 60 feet or less

36 feetor less

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories

Riser Misting System

A riser misting system is designed for flexibility. The system is mobile; if you change your greenhouse configuration often, this system may be your best choice. Risers can be placed in any given location on the benches. A mist is sprayed over the top of the riser and can be relocated to a different area at any time.

Drip Misting System

The drip misting system is used for slow water release. This system is great for gardeners who travel frequently or have busy schedules. A plastic hose runs the length of your bench, drip tubes are attached to the hose and supply individual plants with slow and steady drips of water. Holes can be filled and the tubes rearranged if necessary.

Polyrail Misting System

A polyrail misting system is well suited for large expanses in a greenhouse. Rolling benches are often designed to use the system. There are vertical stakes in each rail that run the length of the benches. The water supply is located within these rails. Nozzles are inserted into the water supply, and a fine mist is brought over the plants.

Suspended Misting System

The suspended misting system is elevated above benches to provide maximum bench space suspended from the rafters. The system runs the length of the benches, suspended from a jack chain. Nozzles are again inserted directly into the water supply. This system can be positioned at virtually any desired height.

Jet Fog Misters

Jet fog misters are used for both watering and humidity. This system is typically mounted at the eave line and sprays a fine mist. Greenhouses with delicate plants, like orchids, operate efficiently with the fine mists. Timing and frequency can be automated.

Irrigation Systems

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories

Humidifiers

Humidifiers are used in greenhouses to bring moisture into the air. Many plants require high levels of humidity; for example, orchids need 60-80% humidity, depending upon the variety. Many tropical or ornamental plants also require humidity levels in the range of 50-60%. Solar Innovations, Inc. offers a line of humidifiers that will be sized to fit your greenhouse; from a small hobby house, to a large research facility. All humidifiers are mounted to the roof and atomize water into a very fine mist.

Hydro XE 500 & XE 1000

• Used on mid-sized greenhouses. Models available for larger greenhouses

• XE 500 propels water up to 25'• XE 1000 propels water up to 30'• Quiet and Nozel free Operation• Withstands salt, lime, and acid exposure• Withstands 100% relative humidity• No filters or special pumps required

Hydro SS 700

• Used on smaller greenhouses• Direct feed hanging units recieve liquid

through a visual flowmeter control panel• Equipped with a 5 GPH flowmeter panel

and 12' condensation drainage line• Propels water up to 20'• No filters or special pumps required• All hardware is Stainless Steel

Humidifiers

Available Models

• 3000SD with 3000 CFM• N30S with 2077 CFM• N40/45S with 4000-4800 CFM • N55/65 with 5000-6000 CFM

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories

Evaporative Coolers

A greenhouse has the potential to overheat in summer, even with ventilation. In order to preserve the plants, cooling needs to be incorporated. Solar Innovations, Inc. recommends an evaporative cooler which reduces temperature and adds humidity to the greenhouse.

The evaporative cooler draws air over a wet pad, by way of a fan. As the water passes over the pads, it evaporates and takes heat with it. The air then passes into the greenhouse and can be up to 30°cooler.

Evaporative coolers consume ¼ less energy than traditional air conditioners, which translates to lower utility bills.

Evaporative coolers exchange air; rather thanre-circulating stagnant air; a benefit for greenhouses which need fresh air to combat pests and disease.

Each unit is vented to the outside, with the physical unit also being located outdoors. The unit’s exterior is a neutral tan, blending easily with the building’s facades.

Evaporative Coolers

Available Models

• 3000SD with 3000 CFM • N30S with 2077 CFM• N40/45S with 4000-4800 CFM• N55/65 with 5000-6000 CFM

Available in white vinyl only. Painted finish available for an additional charge.

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories

Manufacturer Model BTU output Entering Airflow (CFM) Heat Throw (ft) at Max HeightModine HD30 24,000 505 25Modine HD45 36,000 720 27Modine HD60 48,000 990 36Modine HD75 60,000 1160 38Modine HD100 80,000 1490 42Effinity 93 PTC135 125,550 2160 51Effinity 93 PTC155 144,150 2510 59Effinity 93 PTC180 167,400 3020 53Effinity 93 PTC215 199,950 2865 60Effinity 93 PTC260 241,800 4585 70Effinity 93 PTC310 288,300 5400 67

Hot Dawg

• Small greenhouses• Waterproof casing• Quiet operation• Lightweight, easy to install• Natural gas or propane• Side wall or roof venting• Made in the U.S.A.

Effinity

• Specifically designed for greenhouses• High efficiency• Uniform temperature and consistent

air circulation• Vented to the outside• Natural gas or propane• Side Wall or Roof Venting• Lowers CO2 output• Made in the U.S.A.

Heaters

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500 © Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Greenhouse Accessories Control Systems

Enviromental Control System

The purpose of an enviromental control system is to automatically operate all of the greenhouse accessories. When all of the accessories are integrated into the system, the gardener is free to focus more time on the plants.

Compatible Accessories

• Heating• Cooling• Humidity• Ventilation• Watering Systems• Grow Lights• Shading• Multiple Growing Zones

Features

• Temperature triggered operations• Humidity triggered operations• Rain and wind sensor options• Alarms• Computer tracking and recording• Daily or weekly monitoring - dependent upon

selection • Touch screen operation or switch control• Cell phone updates

© Copyright 2014 Solar Innovations, Inc. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 800-618-0669 or 570-915-1500

Greenhouse Accessories Cold Frames

Cold Frames

Cold frames are used to extend the growing season. Plants can be grown in the frames during early spring and late fall. The framing is made of aluminum which will not rot or swell like traditional wooden cold frames. The protection of the insulated glass captures heat for young seedlings. During summer, the lids can be lifted and plants grown directly in the soil. Plants like figs and caladiums, when wrapped in insulation, can often be overwintered in a cold frame.