GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO
-
Upload
sulma-mahardiani -
Category
Engineering
-
view
52 -
download
0
Transcript of GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO
GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO
GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO
• HELMI NUR M.Z.S (NIM 151611012)• RADEN LUQMANNULHAKIM (NIM 151611022)• SULMA MAHARDIANI (NIM 151611028)
D3-TEKNIK PENDINGIN DAN TATA UDARAREFRIGERATION AND AIR CONDITIONING
ENGINEERINGPOLITEKNIK NEGERI BANDUNG
DEFINITIONGREEN HOUSE is a building, room, or area, usually chiefly of glass, in which the temperature is maintained within a desired range, used for cultivating
tender plants or growing plants out of season.
DEFINITION
MONITORING is the regular observation and recording of activities taking place in a project or program. It is a process of
routinely gathering information on all aspects of the project.
DEFINITIONGREEN HOUSE MONITORING SYSTEM is a system which is oversee the aspect of a green house, such
as a temperature, humidity, gasses and the light intensity to keep the green house in the ideal
condition
FEATURES
• Detect temperatures• Detect humidity levels• Detect sunlight and artificial light• Detect carbon dioxide
BENEFIT
• Define specific greenhouse conditions • Control environmental conditions within
greenhouse• Eliminates risk of greenhouse not being
maintained at specific environmental conditions due to human error
Green House Standard ASHRAE
Temperature : 25°C
Humidity : 60-70%
CO2 : 300 ppm
light intensity : 32.000 lux
Arduino LCD DHT11 LDR MQ135
PCB LED BUZZER WIRE HP Keypad
TOOLS
MIND MAPPING
DHT11Temperature&humidity sensor
MQ135C02 SENSOR
LDRLIGHT SENSOR
LCD
DAQ PLX
PROCEDURE1. Prepare the components
2. Arrange the components into PCB by using the wire, corresponding wiring with the pictures that guide to connect into arduino
3. Connect Arduino into PC which have arduino application
4. Compile sketch, make sure that sketch don’t have any error
5. upload sketch to the arduino
6. See the value of measurand on the serial monitor, or on the LCD
DESIGN
RESULT