GREAT PARTS FOR GREAT ENGINES CLEVITE … · GREAT PARTS FOR GREAT ENGINES GEN III & EARLY IV...
Transcript of GREAT PARTS FOR GREAT ENGINES CLEVITE … · GREAT PARTS FOR GREAT ENGINES GEN III & EARLY IV...
HEAVY DUTY REPLACEMENT PARTS OFFERING AFTERMARKET
GREAT PARTS FOR GREAT ENGINESGEN III & EARLY IV SERIES 60®
CLEVITE REPLACEMENT PARTS FOR
The Detroit Diesel® Series 60® engines proved an immediate success from the start of production in 1987 – and in the 20+ years that followed, more than one million engines were produced. For 12 of those years it claimed the position as the most popular truck engine in the world. Available in 11.1L, 12.7L and 14.0L displacements, the Series 60 was the first production heavy duty diesel with fully integrated electronic controls and it offered excellent fuel optimization. It is still considered one of the best engines in the market after more than two decades.
The Series 60 transitioned successfully into off-highway markets as well. It delivered up to 825 horsepower and was available for Truck, Bus, Construction & Industrial, Gen Sets, and Marine applications.
The B50 life (the point which 50% of the engines are still running and 50% require a rebuild) of a Series 60 diesel engine is 1.2 million miles – that’s the highest in the heavy duty industry.
With this type of endurance, it makes economic sense to rebuild these engines with the right parts so you can ensure the same longevity experienced on the original build. MAHLE Clevite now offers sleeve assemblies and complete engine kits for the 12.7L Gen III and Early Gen IV engines.
Liner: Patented design for increased strength The new Clevite® liner design (patent pending) features a non-directional “High-Flow Liner Cooling Gallery” that increases stiffness and reduces liner distortion. To ensure these liners exhibit increased wear resistance and limited thermal growth in the high temperature operating environments, premium Bainatic materials are used. Using Bainatic materials instead of gray cast-iron material increases the overall cost of production, however, the benefits greatly outweigh the cost.
Piston: Crown-Forged steel crown with a phosphate coating The piston includes a manganese phosphate coating for two reasons. First, it serves as a soft coating that “wicks” oil into
the pin joint and aids lubrication of the pin bore. The coating process actually etches the base material and the phosphate, which is a soft crystal, grows on the etched surface. One small drop of oil on the phosphate coating quickly expands over a large area as the oil is absorbed. The phosphate is compressed by the pin and is retained by the micro peaks and valleys [~10 microns] of the etched surface preventing an unwanted steel to steel contact.
Second, it serves as a rust preventative until installation. This is the reason the whole piston is coated and not the just the pin bore.
Rings: Chrome-faced for long life Both compression rings are chrome-faced ductile iron to ensure long life and durability. Piston Oilers: Included for Upgrade All Clevite sleeve assemblies include a new piston oiler and bolt for engine upgrades.
Piston Pins: Two different pin designs The two pin designs available for the 11.1L and 12.7L are referred to as light and heavy. A light pin has a 1.020”/26mm center hole and the heavy pin has a .860”/22mm center hole.
Detroit Diesel® and Series 60® are registered trademarks of the Detroit Diesel Corporation. These trademarks and the Detroit Diesel part references are used only for reference to the parts they replace. These products are not made or authorized by Detroit Diesel Corporation.
GREAT PARTSFOR GREAT ENGINES!
2 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60
ENGINE KITS
Qty Part # Description 468-
1094
468-
1095
468-
1096
468-
1097
468-
1098
468-
1099
468-
1100
468-
1101
468-
5094
468-
5095
468-
5096
468-
5097
468-
5098
468-
5099
468-
5100
468-
5101
6 226-1990 Cylinder Kit [OE#23532561] 22mm Heavy Pin, 15.0:1 CR • • • •
6 226-1991 Cylinder Kit [OE#23532883] 26mm Light Pin, 15.0:1 CR, Before 9/02 • • • •
6 226-1992 Cylinder Kit [OE#23532562] 22mm Heavy Pin, 16.5:1 CR • • • •
6 226-1993 Cylinder Kit [OE#23532885] 26mm Light Pin, 16.5:1 CR, Before 9/02 • • • •
1 MS-2093P* Main Bearing Set [OE#8929680(1) + 8929670(6)] • • • • • • • • • • • • • • • •
1 TW-600S Thrust Washer Set [OE#8929085(2)] • • • • • • • • • • • • • • • •6 CB-1836P* Connecting Rod Bearing Set
[OE#23526142] • • • • • • • • • • • • • • • •1 FS54157 Set, Overhaul-Full Set
[OE#23532720] HS & CS may be substituted
• • • • • • • •1 HS54157 Set, Head [OE#23532333] • • • • • • • •1 VS50278 Set, Valve Cover [OE#23516322]
Gray, 4 Bolt • • • • • • • •1 VS50404 Set, Valve Cover [OE#23522269]
Black, 10 Bolt ○ ○ ○ ○ ○ ○ ○ ○1 OS32204 Set, Oil Pan [OE#8929102] Gray • • • • • • • • • • • • • • • •1 67744 Seal, Crankshaft Rear
[OE#23513578] Double Lip • • • •1 67745 Seal, Crankshaft Front
[OE#23518355] • • • •1 GS33539 Bolt Set, Cylinder Head
[OE#23530768(38)] • • • • • • • •6 GS33448 Injector O-Ring Set
[OE#’s 23511870(1) + 5234702(1) + 5234699(2) + 5104701(1)] • • • • • • • •
7 SH-1986 Camshaft Bearing [OE#8929690] 2 shells per package • • • • • • • •
* Undersize substitutions available○ Optional, contact Customer Service
11.1L & 12.7L “STANDARD” AND “PREMIUM” INFRAME AND OVERHAUL KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.
� Standard kits [listed in black] do not include rocker cover gaskets, injector o-rings, head bolts, cam bearings or seals – they must be purchased separately.
� Premium kits [listed in blue] include the rocker cover gaskets, injector o-rings, head bolts, cam bearings and seals.
CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 3
INFRAME ENGINE KITS
Qty Part # 468-
5104
468-
5105
468-
5106
468-
5107
468-
5108
468-
5109
468-
5110
468-
5111
468-
5112
468-
5113
468-
5114
468-
5115
468-
5116
468-
5117
468-
5118
468-
5119
468-
5120
468-
5121
468-
5122
468-
5123
468-
5124
468-
5125
468-
5126
468-
5127
6 226-2043 • • • • • •6 226-2044 • • • • • •6 226-2045 • • • • • •6 226-2046 • • • • • •1 MS-2093P* • • • • • • • •1 MS-2310P* • • • • • • • •1 MS-2313P* • • • • • • • •1
TW-600S/TW-600S-10 • • • • • • • •
1 TW-696S • • • • • • • •1 TW-700S • • • • • • • •6 CB-1902P* • • • • • • • • • • • • • • • • • • • • • • • •1 HS54157 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32382 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32204 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 VS50278 • • • • • • • • • • • •1 VS50404 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 67745 • • • • • • • • • • • •1 67744 • • • • • • • • • • • •1 GS33539 • • • • • • • • • • • •6 GS33633 • • • • • • • • • • • •7 SH-1986 • • • • • • • • • • • •
*Undersize substitutions available○ Optional, contact Customer Service
14.0L “STANDARD” AND “PREMIUM” INFRAME KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.
� Standard kits [listed in black] do not include rocker cover gaskets, injector o-rings, head bolts, cam bearings or seals – they must be purchased separately.
� Premium kits [listed in blue] include the rocker cover gaskets, injector o-rings, head bolts, cam bearings and seals.
4 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60
OVERHAUL ENGINE KITS
Qty Part # 468-
1104
468-
1105
468-
1106
468-
1107
468-
1108
468-
1109
468-
1110
468-
1111
468-
1112
468-
1113
468-
1114
468-
1115
468-
1116
468-
1117
468-
1118
468-
1119
468-
1120
468-
1121
468-
1122
468-
1123
468-
1124
468-
1125
468-
1126
468-
1127
6 226-2043 • • • • • •6 226-2044 • • • • • •6 226-2045 • • • • • •6 226-2046 • • • • • •1 MS-2093P* • • • • • • • •1 MS-2310P* • • • • • • • •1 MS-2313P* • • • • • • • •1
TW-600S/TW-600S-10 • • • • • • • •
1 TW-696S • • • • • • • •1 TW-700S • • • • • • • •6 CB-1902P* • • • • • • • • • • • • • • • • • • • • • • • •1 FS54157A • • • • • • • • • • • • • • • • • • • • • • • •1 OS32382 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32204 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 VS50278 • • • • • • • • • • • •1 VS50404 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 67745 • • • • • • • • • • • •1 67744 • • • • • • • • • • • •1 GS33539 • • • • • • • • • • • •- GS33633 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
7 SH-1986 • • • • • • • • • • • •*Undersize substitutions available○ Optional, contact Customer Service▲ Included in FS set
14.0L “STANDARD” AND “PREMIUM” OVERHAUL KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.
� Standard kits [listed in black] do not include rocker cover gaskets, injector o-rings, head bolts, cam bearings or seals – they must be purchased separately.
� Premium kits [listed in blue] include the rocker cover gaskets, injector o-rings, head bolts, cam bearings and seals.
CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 5
ENGINE KITSPART # DESCRIPTION APPLICATION NOTES
468-1082 Overhaul Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Narrow
468-1083 Overhaul Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Narrow
468-1084 Overhaul Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Wide
468-1085 Overhaul Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Wide
468-1086 Overhaul Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Narrow
468-1087 Overhaul Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Narrow
468-1088 Overhaul Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Wide
468-1089 Overhaul Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Wide
468-1094 Overhaul Kit 11.1L, 12.L, 226-1990, Premium Kit 15.0:1 CR, 22mm, Heavy Pin
468-1095 Overhaul Kit 11.1L, 12.L, 226-1990, Basic Kit 15.0:1 CR, 22mm, Heavy Pin
468-1096 Overhaul Kit 11.1L, 12.L, 226-1991, Basic Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02
468-1097 Overhaul Kit 11.1L, 12.L, 226-1992, Basic Kit 16.5:1 CR, 22mm, Heavy Pin
468-1098 Overhaul Kit 11.1L, 12.L, 226-1993, Basic Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02
468-1099 Overhaul Kit 11.1L, 12.L, 226-1991, Premium Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02
468-1100 Overhaul Kit 11.1L, 12.L, 226-1992, Premium Kit 16.5:1 CR, 22mm, Heavy Pin
468-1101 Overhaul Kit 11.1L, 12.L, 226-1993, Premium Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02
468-1104 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Early Mains
468-1105 Overhaul Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Early Mains
468-1106 Overhaul Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Early Mains
468-1107 Overhaul Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Early Mains
468-1108 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Notched
468-1109 Overhaul Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Main Notched
468-1110 Overhaul Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Main Notched
468-1111 Overhaul Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Main Notched
468-1112 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Unnotched
468-1113 Overhaul Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Main Unnotched
468-1114 Overhaul Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Main Unnotched
468-1115 Overhaul Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Main Unnotched
468-1116 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Early Mains
468-1117 Overhaul Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Early Mains
468-1118 Overhaul Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Early Mains
468-1119 Overhaul Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Early Mains
468-1120 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Notched
468-1121 Overhaul Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Main Notched
468-1122 Overhaul Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Main Notched
468-1123 Overhaul Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Main Notched
468-1124 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Unnotched
468-1125 Overhaul Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Main Unnotched
468-1126 Overhaul Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Main Unnotched
468-1127 Overhaul Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Main Unnotched
468-5082 Inframe Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Narrow
468-5083 Inframe Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Narrow
468-5084 Inframe Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Wide
468-5085 Inframe Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Wide
6 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60
ENGINE KITS CONT’DPART # DESCRIPTION APPLICATION NOTES
468-5086 Inframe Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Narrow
468-5087 Inframe Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Narrow
468-5088 Inframe Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Wide
468-5089 Inframe Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Wide
468-5094 Inframe Kit 12.7L, 226-1990, Premium Kit 15.0:1 CR, 22mm, Heavy Pin
468-5095 Inframe Kit 12.7L, 226-1990, Basic Kit 15.0:1 CR, 22mm, Heavy Pin
468-5096 Inframe Kit 12.7L, 226-1991, Basic Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02
468-5097 Inframe Kit 12.7L, 226-1992, Basic Kit 16.5:1 CR, 22mm, Heavy Pin
468-5098 Inframe Kit 12.7L, 226-1993, Basic Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02
468-5099 Inframe Kit 12.7L, 226-1991, Premium Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02
468-5100 Inframe Kit 12.7L, 226-1992, Premium Kit 16.5:1 CR, 22mm, Heavy Pin
468-5101 Inframe Kit 12.7L, 226-1993, Premium Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02
468-5104 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Early Mains
468-5105 Inframe Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Early Mains
468-5106 Inframe Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Early Mains
468-5107 Inframe Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Early Mains
468-5108 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Notched
468-5109 Inframe Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Main Notched
468-5110 Inframe Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Main Notched
468-5111 Inframe Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Main Notched
468-5112 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Unnotched
468-5113 Inframe Kit 14.0L, 226-2044, Basic Kit 16.0:1 CR, Main Unnotched
468-5114 Inframe Kit 14.0L, 226-2045, Basic Kit 16.0:1 CR, Main Unnotched
468-5115 Inframe Kit 14.0L, 226-2046, Basic Kit 15.1:1 CR, Main Unnotched
468-5116 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Early Mains
468-5117 Inframe Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Early Mains
468-5118 Inframe Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Early Mains
468-5119 Inframe Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Early Mains
468-5120 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Notched
468-5121 Inframe Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Main Notched
468-5122 Inframe Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Main Notched
468-5123 Inframe Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Main Notched
468-5124 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Unnotched
468-5125 Inframe Kit 14.0L, 226-2044, Premium Kit 16.0:1 CR, Main Unnotched
468-5126 Inframe Kit 14.0L, 226-2045, Premium Kit 16.0:1 CR, Main Unnotched
468-5127 Inframe Kit 14.0L, 226-2046, Premium Kit 15.1:1 CR, Main Unnotched
See pages 3,4 &5 for more detailed kit information.
CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 7
CYLINDER COMPONENTSPART # DESCRIPTION NOTES OE REFERENCE
224-3305 Piston Skirt 11.1L, 12.7L + 50 Series 8.5L; Gen 1,2, For Cross Head Pistons, Ductile Iron 23516681
224-3581 Piston Crown 11.1L, 12.7L + 50 Series 8.5L; Ferrotherm 23530599
224-3582 Piston Crown 11.1L, 12.7L + 50 Series 8.5L; Ferrotherm 23530601
224-3583 Skirt 11.1L, 12.7L + 50 Series 8.5L; Gen 3, Aluminum, Used with Forged Crown 23521802
224-3627 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 22mm, Heavy Pin, 15.0:1 CR, Crown Marked 23530599
23530666
224-3628 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 26mm, Light Pin, 15.0:1 CR, Before 9/02, Crown Marked 23530599
23532882
224-3629 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 22mm, Heavy Pin, 16.5:1 CR, Crown Marked 23530601/23530727
23530668
224-3630 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 26mm, Light Pin, 16.5:1 CR, Before 9/02, Crown Marked 23530601/23530727
23532884
224-3738 Piston Assembly 14.0L; 15.0:1 CR, Bushingless 23530660, 23530596
224-3738X Piston Crown 14.0L; 15.0:1 CR, Bushingless 23530595
224-3739 Piston Assembly 14.0L; 16.0:1 CR, Oval, Bushingless 23530662, 23530598
224-3739X Piston Crown 14.0L; 16.0:1 CR, Oval, Bushingless 23530597
224-3740 Piston Assembly 14.0L; 16.0:1 CR, Cut Back 23530664, 23527775
224-3740X Piston Crown 14.0L; 16.0:1 CR, Cut Back 23527774
224-3741 Piston Assembly 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23533453. 23530767
224-3741X Piston Crown 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23530766
224-3743X Skirt 14.0L 23529997
226-1937 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 2.5mm TLC; Crownless 23532557/23532555
226-1938 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 2.5mm Non-TLC; Crownless 23519625
226-1940 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 3.5mm TLC; Crownless 23523952/23532556
226-1941 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 3.5mm Non-TLC; Crownless 23519637/23532591
226-1990 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.0:1 CR, 22mm, Heavy Pin 23532561
226-1991 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.0:1 CR, 26mm, Light Pin, Before 9/02 23532883
226-1992 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.5:1 CR, 22mm, Heavy Pin, 23532562
226-1993 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 16.5:1 CR, 26mm, Light Pin, Before 9/02 23537594
226-2043 Cylinder Kit 14.0L; 15.0:1 CR , 99-01, Bushingless, Non-EGR 23530661
226-2044 Cylinder Kit 14.0L; 16.0:1 CR, Oval, 99-06 Non-EGR-US Engine 23530663
226-2045 Cylinder Kit 14.0L; 16.0:1 CR, Cut back, 02 to 04 EGR, US Engine 23530665
226-2046 Cylinder Kit 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23533452
226-4558 Cylinder Liner 11.1L, 12.7L + 50 Series 8.5L; Non-TLC 23532361/23532468
226-4573 Cylinder Liner 11.1L, 12.7L + 50 Series 8.5L; Clevite Patent Pending TLC design 23531502/23531249
226-4583 Cylinder Liner 14.0L; Clevite Patent Pending TLC design 23531504
247-5069 Crankshaft 11.1L; 12 Hole 8929238/23515597
247-5070 Crankshaft 12.7L; 12 Hole, 47mm Rod Bearings 8929239/23515599
247-5223 Crankshaft 12.7L; Std. Mains, .010 Rods, Wide Rod Journal, 6 Hole 23515598
247-5224 Crankshaft 14.0L 23527225
S41891 Cylinder Ring Set 11.1L, 12.7L + 50 Series 8.5L; 2.5mm Top Ring 23503747
S41892 Cylinder Ring Set 11.1L, 12.7L + 50 Series 8.5L; 3.5mm Top Ring 23505729
S42132 Cylinder Ring Set 14.0L; 3mm Top Ring 23533510
S42133 Cylinder Ring Set 14.0L 23531252
8 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60
CYLINDER COMPONENTS BEARINGSPART # DESCRIPTION NOTES OE REFERENCE
CB-1662P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 43.29mm Wide, Early Narrow Style, 50mm Oil Hole
8929710/Up 8929556(1) + lwr 8929557(1)
CB-1662P-10 Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 43.29mm Wide, Early Narrow Style, 50mm Oil Hole
8929711/Up 8929714(1) + lwr 8929715(1)
CB-1792P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style
23515581
CB-1792P-.25mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style
23515582
CB-1792P-.50mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style
23515583
CB-1836P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod
23535745(2)
CB-1836P-.25mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod
23535746(2)
CB-1836P-.50mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod
23527063(2)
CB-1902P Con. Rod Set 14.0L; Drilled Upper & Lower 23535741(2)
CB-1902P-.25mm Con. Rod Set 14.0L; Drilled Upper & Lower 23535742(2)
CB-1902P-.50mm Con. Rod Set 14.0L; Drilled Upper & Lower 23532254(2)
MS-2092P Main Set 50 Series 8.5L 8929670(4) + 8929680(1)
MS-2092P-10 Main Set 50 Series 8.5L 8929671(4) + 8929681(1)
MS-2092P-20 Main Set 50 Series 8.5L 8929672(4) + 8929682(1)
MS-2093P Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929680(1) + 8929670(6)/23533252(7) + 23533252(6) - 23533263(1)
MS-2093P-10 Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929681(1) + 8929671(6)
MS-2093P-20 Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929682(1) + 8929672(6)
MS-2310P Main Set 14.0L; w/Machined Notches, Uses TW-696S 23533252(7) + 23533259(7)
MS-2310P-10 Main Set 14.0L; w/Machined Notches, Uses TW-696S
MS-2310P-20 Main Set 14.0L; w/Machined Notches, Uses TW-696S
MS-2313P Main Set 14.0L; Without Machined Notches, Uses TW-700S
23533252(6) + 23533259(6) + 23532926(1) + 23533263(1)
MS-2313P-10 Main Set 14.0L; Without Machined Notches, Uses TW-700S
MS-2313P-20 Main Set 14.0L; Without Machined Notches, Uses TW-700S
SH-1986 Camshaft, Individual 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929690
TW-600S Thrust Washer Sets 11.1L, 12.7L, 14.0L; Set of 2, for MS-2093P 8929085(2)
TW-600S+10 Thrust Washer Sets 11.1L, 12.7L, 14.0L; Set of 2, for MS-2093P 8929085(.010)(2)
TW-696S Thrust Washer Sets 14.0L; W/Machined Notches, for MS-2310P 23530554(2) + 23530555(2)
TW-700S Thrust Washer Sets 14.0L; Without Machined Notches, for MS-2313P
8929085(4)
CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 9
GASKETSPART # DESCRIPTION NOTES OE REFERENCE
54157 Set, Cylinder Head 11.1L, 12.7L, 14.0L; 8 Steam Hole 23530421
67744 Seal, Crankshaft Rear 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Double Lip, Wet
23513578
67745 Seal, Crankshaft Front 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Includes Repair Sleeve
23518355
B45895 Valve Stem Seal 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23516483
B45914 Valve Stem Seal 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23523930
CS54157A Set, Lower 11.1L, 12.7L, 14.0L + 50 Series 8.5L N/A
FS54157 Set, Overhaul-Full Set 11.1L, 12.7L; Consolidate Set 23532720/23532332/23512691
FS54157A Set, Overhaul-Full Set 14.0L; For EGR 23536443
GS33448 Injector O Ring Set 11.1L, 12.7L + 50 Series 8.5L; 1 Required Per Cylinder
23511870(1) +5234702(1) +5234699(2) +5104701(1)
GS33539 Bolt Set, Cylinder Head 11.1L, 12.7L, 14.0L; 38 Per Set 23530768(38)
GS33633 Injector O Ring Set 14.0L; For One Injector 23537111
HS54157 Set, Cylinder Head Set 11.1L, 12.7L, 14.0L ; Consolidate Set 23532333/ 23536442
MS19666 Set, Exhaust Manifold 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23533983(3)
OS32204 Set, Oil Pan 11.1L, 12.7L, 14.0L ; Gray 8929102
OS32204-1 Set, Oil Pan 11.1L, 12.7L, 14.0L; Gray, Pan Gasket Only 8929102(1) +8929344(2) +8929347(2)
OS32382 Set, Oil Pan 11.1L, 12.7L, 14.0L; Black, 23522279(1) +23514465(1) + 23505992(1) +8929344(2) +8929347(1)
VS50278 Set, Valve Cover 11.1L, 12.7L, 14.0L; Gray, 4 Bolt 23516322
VS50404 Set, Valve Cover 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Black, 10 Bolt
23522269
Victor Reinz and the Victor Reinz trademark are property of Dana Limited and used under license to MAHLE Clevite Inc.
ANCILLARY CONT’D
PART # DESCRIPTION NOTES OE REFERENCE
211-3313 Valve, Exhaust 11.1L, 12.7L, 14.0L + 50 Series 8.5L; 1.5760" Head Dia., .3421" Stem, 8.498" Lth. 30 Degree Seat, for Valves Marked H or U on Head, Valve Only, Order Locks Separately, (2)216-5001 Keepers
8929590/23501577
211-3345 Valve, Intake 11.1L, 12.7L, 14.0L + 50 Series 8.5L; 1.7320" Head Dia., .3421" Stem, 8.498" Lth., 30 Degree Seat, Valve Only, Order Locks Separate, Add (2)216-5001 Keepers
8929589/23501576
212-1462 Spring, Valve 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Yellow Stripe, Intake & Exhaust, 14L from 2003
8929415
216-5001 Valve Locks 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929573
217-4076 Valve Guide 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23518571
218-8002 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6285" OD,1.357" ID, 0.249" Lth.
8929126
218-8002.010 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6385" OD,1.357" ID, 0.249" Lth.
8929628
218-8002.020 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6485" OD,1.357" ID, 0.249" Lth.
8929629
TURBOCHARGERS
ANCILLARY
10 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60
PART # NOTES OE REFERENCE
098TC21003000 12.7L, 14.0L; With EGR 23534775
098TC21003100 12.7L, 14.0L; With EGR, Reman 23534775
098TC24130000 12.7L, 14.0L; Non-Wastegated 95-04 8929507, 8929797, 8929903, 23504967, 23504966
098TC24131000 12.7L, 14.0L; Non-Wastegated 95-04 8929435, 8929796, 8929902, 23503732
098TC24132000 12.7L, 14.0L; Non-Wastegated 95-04 23508410, 23508411
098TC24133000 12.7L, 14.0L; Non-Wastegated 95-04 23508405,23515894, 23518695, 23508406. 23528029, 23521167
098TC24136000 12.7L, 14.0L; Non-Wastegated 95-04 23516431, 23515635, 23515636
098TC24137000 12.7L, 14.0L; Non-Wastegated 95-04 23518588, 23518597, 23523197
098TC25592000 12.7L, 14.0L; Wastegated 95-04 23522188, 23522189, 23522190, 23522306, 23522312, 23522781, 23523040, 23523478, 23525462, 23525463, 23526016, 23526017, 23526271, 23526272, 23526679, 23526680, 23526681, 23526682, 23526683, 23526684, 23526685, 23526692, 23528052, 23528053, 23528054, 23528055, 23528058, 23528060, 23528062, 23528064, 23528066, 23528067, 23528069
098TC25606000 12.7L, 14.0L; Wastegated 95-04 23515635. 23518588, 23518597, 23528059
ANCILLARY CONT’D
TURBOCHARGERS
PART # DESCRIPTION NOTES OE REFERENCE
218-8002.030 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6585" OD,1.357" ID, 0.249" Lth.
8929630
218-8003 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8195" OD, 1.571" ID, 0.283" Lth
8929127
218-8003.010 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8295" OD, 1.571" ID, 0.283" Lth
8929625
218-8003.020 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8395" OD, 1.571" ID, 0.283" Lth
8929626
218-8003.030 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8495" OD, 1.571" ID, 0.283" Lth
8929627
223-1845 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; For Crosshead 8929087
223-1850 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; 1.023"/26mm ID, Light, Lth. 4.170"/106mm
23521649
223-1851 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; 0.866"/22mm ID, Heavy, Lth. 4.170"/106mm
23525168
223-1933 Piston Pin 14.0L; 4.319"/109.70mm Lth. 23539049
223-4000 Piston Oiler 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23528493
223-5512 Piston Bolts 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929337
223-7207 O-Ring Kit 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929013(1 ) + 8929176(2)
CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 11
ww
w.m
ahle-aftermarket.com
HD
-4-712
MAHLE Clevite Inc.
23030 MAHLE Drive
Farmington Hills, MI 48335
United States
Phone +1 (800) 338-8786
MAHLE Clevite Canada, ULC
3365 Mainway, Unit #2
Burlington, ON L7M 1A6
Canada
Phone +1 (800) 531-4847
Fax +1 (905) 335-5388
MAHLE Aftermarket S de RL de CV
Km. 53.750 Carretera México-Toluca
Zn Ind. Dona Rosa ,Letra E, Interior 1A
Col. Parque Industrial Lerma, 52000, Lerma, Mexico
Teléfono: +52 722 2624530,
Fax: +52 722 2624550