Graver Catalog 2012.pdf

7/26/2019 Graver Catalog 2012.pdf

1/76

Corporate Headquarters

200 Lake DriveGlasgow, Delaware 19702 U.S.A.Telephone: 302-731-1700Fax: 302-731-1707E-Mail: [email protected]: www.gravertech.com

Customer ServiceToll-free (in U.S.): 888-353-0303Outside US: 302-731-3568

2010 Graver Technologies LLC.

Superior Products & Global ReachWhether your business is around the corner or around the world,Graver Technologies can support you with superior products and

services. Our ion exchange, adsorbent, filtration, and membraneproducts deliver exceptional performance in some of the harshestprocess environments in North America, Europe, Asia, the PacificRim, South America, and Africa.

Graver Technologies is a member of The Marmon Group (aBerkshire Hathaway Company), an international group with morethan $7 billion in annual sales. Around the corner or around theworld, Graver Technologies is a fast growing company with thetechnical resources and financial strength that make us the perfectpartner for your business.


2/76


3/76

GRAVER TECHNOLOGIES


4/76

Company Profile

Graver Technologies offers a broad selection of liquid process filters, high performance specialty ion exchange resinsand services, and proprietary adsorbents for the most demanding application environments. We also supply filtrationproducts to manufacturers of pumps, turbines, compressors, medical devices, and consumer and industrialvacuums.Because of the breadth of our technologies and the depth of our scientific and analytical resources, we areoften called upon to solve our customers most challenging problems.

Graver Technologies serves industries that include: Process Water Power Generation Food & Beverage Drinking Water Pharmaceutical Chemical

Liquid Process Filter GroupThe products found in this catalog are offered by Gravers Liquid Process Filter Group. Graver Technologies offers anextensive line of filter cartridges and housings to provide high performance and cost effective solutions for liquid processapplications. With filters suitable for common industrial, high purity water and other critical process streams, GraverTechnologies liquid process filters service a wide array of applications in the beverage, chemical, microelectronics, andbiopharmaceutical markets. Our membrane filters are constructed in a state-of-the-art manufacturing facility that includesan ISO Class 7 clean room to meet the most demanding customer requirements. Graver Technologies liquid process fil-ters are also available in a wide range of media types, cartridge designs, micron ratings, and configurations to optimize

filtration efficiency while providing dependable performance and long service life.

Global PresenceExporting on average more than 35% of our products, Graver Technologies is recognized worldwide. Our global pres-ence extends from North and South America, across Europe and into Asia including the Pacific Rim, Japan, andAustralia. We are headquartered in Glasgow, Delaware, with additional manufacturing and marketing facilities inNewark, New Jersey and Honeoye Falls, New York.

Our Parent CompanyGraver Technologies is a member of The Marmon Group (a Berkshire Hathaway company), an international corporationwith more than $5 billion in annual sales. Around the corner or around the world, Graver Technologies is a fast-growingcompany with the technical resources and financial strength that make us the perfect partner for your business

www.gravertech.com


5/76www.gravertech.com

Fi l tration | Separation | Puri f ication

Quality System

Graver Technologies is an ISO 9001 registered firm under BSI Management Systems.

Quality at Graver means:

Every employee is responsible for quality

Continuous improvements in products and processes

Doing the job right the first time

Continually monitoring key processes

Preventing nonconformance

Producing to established specifications

Providing consistent and reliable products

Monitoring and improving customer satisfaction levels

On time delivery

Working with capable vendors

Understanding our customers needs

Delighting our customers

At Graver our people and our products reflect our commitment to provide the best value to our customers, to createproducts that reflect the most advanced technology, and to adhere to manufacturing practices that deliver consistent,high performance products and service each and every time.


6/76

Customer Service: 888-353-0303 International Customer Service: 302-731-1700 | 1 |

Table of Contents

Membrane FiltersZTEC-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ZTEC WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ZTEC-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

ZTEC-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

WaterTEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

TefTEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Pleated FiltersQMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

QMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20QCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

PMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

PMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

QXL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

GFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

GFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

High Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Depth FiltersStratum A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Stratum C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

COAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42MBF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

SpecialtyTPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Steris Replacement Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

RTEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

GCAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

CarbTEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

HousingsSCB & SCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

MC-304 & 316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

IHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

SHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70


7/76|2 | www.gravertech.com



8/76

Graver Product Media Hardware Retention Ratings (um) Efficiency

ZTEC G Polyethersulfone Polypropylene 0.1, 0.2, 0.45, 0.65 Absolute

ZTEC WB Polyethersulfone Polypropylene 0.45, 0.65 Absolute

ZTEC B Polyethersulfone Polypropylene 0.2, 0.45, 0.65 Absolute

ZTEC E Polyethersulfone Polypropylene 0.03, 0.1, 0.2, 0.45 Absolute

WaterTec Polyethersulfone Polypropylene 0.05, 0.1, 0.2, 0.45, 0.65 Absolute

TefTec ePTFE Polypropylene 0.05, 0.1, 0.2, 0.45, 1.0 Absolute


Membrane Filters


9/76| 4 | www.gravertech.com


ZTEC G Polyethersulfone Membrane Filter Series

Absolute Rated Polyethersulfone MembranePleated Filter CartridgesThis pleated, disposable filter element is constructed ofabsolute rated, hydrophilic, asymmetric polyethersulfonemembrane with extended filter area to allow for a highsystem flow rate.

Filter FeaturesBenefits 7.0 ft2 (0.65 m2) of membrane surface area per10" element

High throughput Longer on-line service reduces costly maintenance time

Absolute rated membrane from 0.1 to 0.65 m

Manufactured in an ISO Class 7 cleanroom environment

100% flushed with 18 M -cm DI water and gross

integrity tested Meets USP Class VI biological test for plastics

Fixed pore construction eliminates dirt unloadingas differential pressure increases

Low extractables

Filter Specifications

Media: Asymmetric Polyethersulfonemembrane

Inner core, end caps, cage: Polypropylene

Support layers: Spunbonded Polypropylene

Gaskets/O-Rings: Buna-N, EPR, Silicone, Viton, Teflon

Encapsulated Viton O-RingsMicron ratings: 0.1, 0.2, 0.45, 0.65 m

Dimensions and Operating Parameters

Nominal lengths: 9.75 10, 20, 30, 40(24.7, 25.4, 50.8, 76.2, 101.6 cm)

Outside diameter: 2.7 (6.9 cm)

Inside diameter: 1.0 (2.54 cm)

Surface area: 7 ft 2. (0.65m2) per10 inch element

Maximum sustainedoperating temperature: 180F (82C) at 20 psid (1.38 bar)

Maximum 60 psid @ 80F (4.14bar @ 27C)

differential pressure: 30 psid @ 160F (2.07 bar @ 71C)15 psid @ 200F (1.03 bar @ 93.3C)

Maximum reversedifferential pressure: 40 psid @ 70F (2.8 bar @ 21C)

Recommended change-out pressure: 35 psid (2.4 bar)

Performance SpecificationsHot DI WaterFilter cartridge will withstand temperatures of 185F (85C) forup to 30 consecutive minutes.

Chemical CompatibilityFilter cartridge resists most acids and bases, pH 114 andmost oxidizing agents.

Sanitizing AgentsFilter cartridge may be sanitized in place with commonoxidizing agents.

Steam/AutoclaveCartridges may be steamed or autoclaved for at least 50thirty minute cycles @ 275F (135C).

Applications

Food & Beverage Fil tration of acids and bases

Cosmetics Ink

Chemicals Ultra pure water

Aqueous solutions

FDA listed materialsAll polypropylene material used in manufacturing complieswith the regulations of the Food and Drug Administration(FDA) title 21 of the Code of Federal Regulations Sections174.5, as applicable for food and beverage contact.


10/76


Membrane Fi l ters

0 2 4 6 8 USGPM

0 7.6 15.1 22.7 30.3 LPM

4

3

2

1

0

.28

.21

.14

.07

.0

DifferentialPre

ssure

B ar P SI

0.2m

0.45m0.65m

Typical Flow Rate @ 70F (21C) (per 10''cartridge)

0.1m

ZTEC G Nomenclature Information

ZTEC G 0.1 -10 P7 SGasket or O-Ring

S SiliconeB Buna-NE EPDM

V VitonT Teflon encap.

Viton (O-Rings only)

Retention Rating (microns)

0.10.20.450.65

Nominal Length (inches)

-5-9.75-10-20-30-40

Filter Type

ZTEC-G Series Filters

Example: ZTEC G 0.1-10P7S = ZTEC G filter, 0.1 micron, 10 inches, 226/Fin, Silicone O-rings

End Configuration

P Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open End

P7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-RingNPCDouble open end, internal O-Ring




Pleated Polyethersulfone (PES) Membrane forCritical Filtration in Wine and Beer

ZTEC WB cartridge filters utilize a special polyethersulfone mem-brane to provide consistent removal of spoilage organisms andinorganic particulate. The product offers excellent retention effi-ciency and extended on-stream life making it an ideal filter forthe clarification of beer and wine. The PES membrane, avail-able with either 0.65 or 0.45 m pore sizes, is designed tomeet and surpass the filtration criteria necessary to maintainproduct quality and characteristics. Produced in an ISO Class 7cleanroom, the cartridges are integrity tested during productionto assure performance and consistency.

Filter FeaturesBenefits

Manufactured in an ISO Class 7 Cleanroom Environment 100% flushed with 18 M -cm DI water and integrity tested Low adsorption of protein, color and flavor components All materials are FDA listed for food and beverage contact Steamable/sanitizable for cleaning and reuse High log reduction values for spoilage organisms PES membrane provides high capacity contaminant loading

Typical Applications White Wine Red Wine Beer Sparkling Wine Wine/Malt Coolers Champagne Distilled Spirits


Media: Asymmetric Polyethersulfone membrane



Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton O-Rings

Micron ratings: 0.45 m, 0.65 m





Surface area: 7.6 ft 2

. (0.7m2

) per 10 inch elementMaximum sustainedoperating temperature: 180F (82C) at 20 psid (1.38 bar)

Maximum 80 psid @ 70F (5.5 bar @ 21C)differential pressure: 40 psid @ 176F (2.8 bar @ 80C)



Performance Specifications

Hot DI Water

Filter cartridge will withstand temperatures of 185F (85C)for up to 30 consecutive minutes.

Cleaning/Sanitization

Compatible with most common chemical cleaning, sanitizingand sterilizing agents and with pH range from 114.Consult factory for specific compatibility information.


Typical Bacterial Retention Performance

0.45m: LRV for Lactobacillus brevis 7.60.45m: LRV for Oenococcus oeni 10.00.45m: LRV for S. cerevisiae 110.65m: LRV for S. cerevisiae 8.7

Integrity Test Specifications

Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC WB filters wetwith water:

Pore Size Bubble Point Diffusive Air Flow

0.45 m: 20psig (1.4 bar) 35cc/min @ 16psig (1.1 bar)


FDA Listed Materials

All materials comply with FDA title 21 of the Code of FederalRegulations Sections 174.5, as applicable for food andbeverage contact.

ZTECWB Polyethersulfone Membrane Cartridge Filters


12/76


Membrane Fi l ters

0 7.6 15.1 22.7 30.3 37.8 LPM

0 2 4 6 8 10 USGPM

4

3

2

1

0

0.65m0.45m

.28

.21

.14

.07

.0

Different

ialPressure

Ba r PS I

Typica F ow Rate @ 70F (21C) (per 10''cartridge)

ZTEC WB Nomenclature Information

ZTEC WB 0.45 -20 P2 E

End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open End

P7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-Ring

Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon encap.


Retention Rating (microns)0.450.65

Nominal Length (inches)-5-9.75-10-20-30-40

Filter TypeZTEC WB Series Filters

Example: ZTEC WB 0.45-20P2E = ZTEC WB filter, .45 micron, 20 inches, 226/Flat, EPDM O-ring




Pleated Polyethersulfone (PES) Membrane forBioburden Reduction in Beverages and

BiopharmaceuticalsZTEC B Bioburden Reduction grade membrane cartridgesprovide consistent performance for bioburden reduction andparticle removal across a wide range of beverage, pharma-ceutical and biological fluids. The naturally hydrophilic PESmembrane filters provide exceptional flow rates, long on-streamlife, broad chemical compatibility and have no addedsurfactants to contribute to extractables. The cartridges areintegrity testable and steamable to assure reliable service incritical applications.

Filter FeaturesBenefits Manufactured in an ISO Class 7 Cleanroom Environment

100% flushed with 18 M -cm DI water and integrity tested Meets USP Class VI Biological Test for Plastics All materials are FDA listed for food and beverage contact Repeatably Steamable/Sanitizable High retentions up to 107/cm2 challenged for bacteria and

yeast Pore size, lot and serial number are stamped on each filter

element for identification and traceability

Typical Applications Bottled Water Opthalmic Solutions Culture Media Reagent Chemicals LVPs Buffers Juices


Media: Asymmetric Polyethersulfone membrane



Gaskets/O-Rings: Buna-N, EPDM, Sil icone, Viton, TeflonEncapsulated Viton O-Rings

Micron ratings: 0.2 m, 0.45 m, 0.65 m





Surface area: 7.6 ft 2. (0.7m2) per 10 inch element

Maximum sustainedoperating temperature: 180F (82C) at 20 psid (1.38 bar)

Maximum 60 psid @ 80F (4.14bar @ 27C)differential pressure: 30 psid @ 160F (2.07 bar @ 71C)

15 psid @ 200F (1.03 bar @ 93.3C)




Hot DI Water



Compatible with most common chemical cleaning, sanitizingand sterilizing agents and with pH range from 114.Consult factory for specific compatibility information.


Typical Bacterial Retention Performance

0.2m: LRV for B. diminuta 7.80.45m: LRV for S. marcescens 8.50.65m: LRV for S. cerevisiae 11 LRV for L. brevis 7.6

Integrity Test Specifications

Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC-B filters wetwith water:

Pore Size Bubble Point Diffusive Air Flow


0.45 m: 25psig (1.7 bar) 35cc/min @ 20psig (1.4 bar)0.65 m: 18psig (1.2 bar) 35cc/min @ 15psig (1.0 bar)


All materials comply with FDA title 21 of the Code ofFederal Regulations Sections 174.5, as applicable for foodand beverage contact.

ZTECB Polyethersulfone Membrane Cartridge Filters


14/76


Membrane Fi l ters

0 2 4 6 8 USGPM

0 7.6 15.1 22.7 30.3 LPM

4

3

2

1

0

.28

.21

.14

.07

.0

Differentia

lPressure

Ba r PS I

0.2m

0.45m0.65m

Typica F ow Rate @ 70F (21C) (per 10''cartridge)

ZTEC B Nomenclature Information

ZTEC B 0.2 -20 P2 E

End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open End

P8 222/Fin Single Open EndAM Single open end, internal O-Ring




0.20.450.65


Filter TypeZTEC B Series Filters

Example: ZTEC B 0.2-20P2E = ZTEC B filter, 0.2 micron, 20 inches, 226/Flat, EPDM O-ring

NPCDouble open end, internal O-Ring




Pleated Polyethersulfone (PES) Membrane forFinal Filtration of Ultrapure WaterZTEC E microelectronics grade cartridges represent Graverslatest development in ultrapure water filtration technology.The filters are inherently hydrophilic and contain no addedsurfactants or wetting agents that could contaminate pureand ultrapure water streams. The PES membrane offerssuperior flow characteristics, high contaminant capacity andconsistent removal of sub-micron particles. The cartridgesexhibit rapid rinse-up to 18 M-cm resistivity and single digitppb levels of TOC.

Filter FeaturesBenefits Manufactured, flushed, tested and packaged, in an ISO

Class 7 Cleanroom Environment.

Filters are100% flushed with 18 M-cm DI water andintegrity tested.

Resistivity rinse-up to 18 M-cm and single digit ppb TOClevels with minimal throughput.

Available in a variety of end cap/adapter configurationsto fit all industry-standard housings.

Pore size, lot and serial number are stamped on each filterelement for identification and traceability.


Media: Asymmetric Polyethersulfonemembrane



Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton O-Rings

Micron ratings: 0.03 m, 0.1 m, 0.2 m, 0.45 m





Surface area: 7.6 ft.2 (0.7 m2) per 10-inch element


15 psid @ 203F (1.03 bar @ 95C)




Hot DI Water



Compatible with most common chemical cleaning, sanitizingand sterilizing agents and with pH range from 1-14.Consult factory for specific compatibility information.

Rinse-Up Volumes

Resistivity rinse-up to 18 M-cm:


16/76


Membrane Fi l ters

0 2 4 6 8 10 USGPM

0 7.6 15.1 22.7 30.3 37.9 LPM

6

4.5

3

1.5

0

.42

.30

.21

.10

.0

DifferentialP

ressure

B ar PS I0.03m

0.1m0.2m

0.45m

F ow Rate* @ 70F (21C) (per 10''cartridge)

End Configuration



ZTEC E Nomenclature Information

ZTEC E 0.45 -30 P8 T




0.030.1

0.20.45


Filter TypeZTEC E Series Filters

Example: ZTEC E 0.45-30P8T = ZTEC E filter, 0.45 micron, 30 inches, 222/Fin, Teflon encap. Viton O-rings




Absolute Rated Polyethersulfone MembraneFilter CartridgesThe WaterTEC filter series is constructed of absolute rated,hydrophilic, asymmetric polyethersulfone membrane andpolypropylene components. The filter is designed for overallfiltration economy and provides excellent flow rates andthroughputs.

Filter FeaturesBenefits Low pressure drop reduces energy costs

High dirt holding capacity minimizes change-outs anddown time

All thermal bonded construction with no adhesives

Available in all common configurations to allow use of

existing filter housings Cost effective absolute filtration

All materials are FDA listed for food and beverage contact(U.S. CFR, Title 21)

Meets USP, Class VI for plastics


Media: Asymmetric polyethersulfone

Inner core, end caps,cage: Polypropylene


Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton (O-Rings only)

Micron ratings: 0.05, 0.1, 0.2, 0.45, 0.65 m

Compatibility: Compatible with most common chemical cleaning, sani-tizing and sterilizing agents and with pH range from 114. Consultfactory for specific compatibility information

Cleanliness: Non-fiber releasing, no wetting agents


Typical nominal lengths: 9.75, 10, 20, 30, 40(24.7, 25.4, 50.8, 76.2, 101.6cm)



Surface area: 6 ft 2

. (0.56m2

) per 10 inch elementMaximum sustainedoperating temperature: 180F (82C) at 20 psid (1.38 bar)


15 psid @ 200F (1.03 bar @ 93.3C)


Typical Applications General water filtration

DI water prefilter

DI water post filter

Aqueous based chemical processing

WaterTECTM Filter Series

0 1 2 3 4 5 6 7 8 GPM

0 4 8 11 15 19 23 27 30 LPM

4.0

3.0

2.0

1.0

0

.28

.21

.14

.07

0

DifferentialPressure

WaterTEC Clean Water Flow Rates

(per 10-inch cartridge)Bar PSI

Flow Rate

0.1 m0.05 m

0.2 m

0.45 m0.65 m


18/76


Pleated Fi l ters

WaterTEC Nomenclature Information

WaterTEC 0.2 -10 P2 E - R

Gasket or O-Ring



Viton (O-Rings only)T Teflon gasket


0.050.10.20.450.65


-5-9.75-10-20-30-40

Filter Type

WaterTECSeries Filters

Pre-Rinse Option

-R Factory Pre-Rinse

Example: WaterTEC 0.2-10P2E-R = WaterTEC filter, 0.2 micron, 10 inches, 226/Flat, EPDM O-Rings, filter gets rinsed

End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open End

AM Single open end, internal O-RingNPCDouble open end, internal O-Ring




Absolute Rated PTFE Membrane FilterCartridges

TefTEC cartridge filters are constructed with naturallyhydrophobic PTFE membrane and polypropylene supportlayers and components. The HIMA retentive PTFE membraneoffers superior hydrophobicity and water intrusion resistancecompared to PVDF and polypropylene membranes, and thecartridge construction offers a cost-effective alternative to all-fluorocarbon filters. TefTEC filters are ideal for gas/ventapplications and the filtration of aggressive chemicals andsolvents.

TefTEC Filter FeaturesBenefits High surface area, single-layer construction provides

superior flow rates and minimizes filtration system size

100% Flushed with 18 M -cm DI water and integritytested

Meets applicable CFR criteria and USP Class VI BiologicalTest for Plastics

Filters are manufactured, flushed, tested and packaged inan ISO Class 7 Cleanroom Environment.

Manufactured using current Good Manufacturing Practices

Each filter element stamped with pore size, lot and serialnumber for identification and traceability.


Media: Gore-Tex expanded PTFE membrane

Inner core,end caps, cage: Polypropylene

Support layers: Polypropylene

O-Rings: Buna-N, EPDM, Silicone, Viton,Teflon Encapsulated Viton

Micron ratings: 0.05 m, 0.1 m, 0.2 m, 0.45 m, 1.0 m


Typical Nominal lengths: 9.75, 10, 20, 30, 4024.8, 25.4, 50.8, 76.2 101.6cm)



Surface area: 8.5 ft2. (0.79m2) 10 inch element

Maximum operatingtemperature: 203F (95C)

Maximum operating 75 psid @ 70F (5.2 bar @ 21C)pressure: 40 psid @ 176F (2.8 bar @ 80C)

15 psid @ 203F (1.03 bar @ 95C)



Steam/Autoclave

Cartridges will withstand at least 100 steam/autoclave30 minute cycles @ 275F (135C)

Integrity Test Values

Air Diffusion per 10 inch cartridge wet with 60/40

IPA/water. Contact Graver Technologies for specific method.Pore Size Specification

0.05 m: 50 cc/min @ 22 psig (1.5 bar)0.1 m: 50 cc/min @ 18 psig (1.2 bar)0.2 m: 20 cc/min @ 12 psig (0.8 bar)0.45 m: 15 cc/min @ 5 psig (0.34 bar)1.0 m: 15 cc/min @ 3 psig (0.2 bar)

Applications Aggressive chemicals Tank Vents

Strong acids/bases Compressed gases

Solvents Photoresists

Pharmaceutical Intermediates Hot DI water

Fermentation air

TefTEC PTFE Membrane Filter Series


20/76


Pleated Fi l ters

-5-9.75-10-20-30-40

TefTEC Nomenclature Information

TefTEC 0.1 -20 P2 SGasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon encap.



0.050.1

0.20.451

Nominal Length (inches)Filter TypeTefTEC Series Filters

Example: TefTEC 0.1-20P2E = TefTEC filter, 0.1 micron, 20 inches, 226/Flat, Silicone O-ring

End Configuration



0.90.80.7

0.60.50.40.30.20.1

PSI

0.05/0.1m

0.2m

0.45m1.0m

Air Flow Rate* (per 10''cartridge)

M3/HR

SCFM

Air Flow Rate *

.062

.048

.034

.021

.007

DifferentialPre

ssure

Bar

5 10 15 20 25 30 35 40 45 50

0 17 34 51 68 85

*Test conditions: System pressure at


22/76


Graver ProductType Media Hardware Retention Ratings (um) Efficiency

QMA Polypropylene Polypropylene 0.2, 0.45, 1, 2.5, 5, 10, 20 AbsolutePleated Melt Blown Sheet Beta 5000

QMC Polypropylene Polypropylene 0.1, 0.2, 0.4, 0.6, 1, 3, 5, 10 NominalPleated Melt Blown Sheet Beta 20

QCR Polypropylene Polypropylene 1 AbsolutePleated Melt Blown Sheet NSF/ANSI 53

PMA Polypropylene Polypropylene 0.2, 0.45, 1, 2.5, 5, 10, AbsolutePleated Melt Blown Sheet 25, 50, 100 Beta 5000

PMC Polypropylene Polypropylene 0.2, 0.25, 0.45, 0.5, NominalPleated Melt Blown Sheet 1, 2, 5, 10, 25, 50 Beta 10

QXL Polypropylene Polypropylene 0.45, 0.5, 1, 3, 5, 10, 20, 40 AbsolutePleated Melt Blown Sheet Beta 1000

GFC Micro fiberglass Polypropylene 0.2, 0.45, 1, 3, 10, 30 NominalPleated Fiberglass Beta 10

GFP Micro fiberglass Polyester 0.2, 0.45, 1, 3, 10, 30 NominalPleated Fiberglass Beta 10

High Flow Polypropylene Polypropylene 1, 3, 5, 10, 20, 40, 60, 100 AbsolutePleated Melt Blown Sheet Beta 1000

Pleated Filters




Absolute Rated High Performance PleatedPolypropylene Filter CartridgeThis filter is constructed with a high surface area melt blownpolypropylene media for low initial pressure drop, high dirtholding capacity, and high efficiency performance.

Filter Features Benefits Micron ratings from 0.2 to 20m Broad application

range

Meets current USP Class VI biological test for plastics

Absolute Efficiency Rated at 99.98% (Beta 5000)

High surface area High flow rate, and long service life Minimize maintenance cost

Fixed Pore construction Resists dirt unloading at

maximum differential pressure Polypropylene Construction Inert to many process fluids

Various Gasket/O-ring materials Compatible with manyfluids

Heavy duty molded cage High structural strength

Highly consistent melt blown media for consistent perform-ance


Construction material: Polypropylene

Gaskets/O-Rings: Buna-N, EPR, Silicone, Viton, Teflon

Encapsulated Viton (O-Rings only)Micron rat ings: 0.2, 0.45, 1.0, 2.5, 5.0, 10, 20m





Surface area: up to 7.0 ft2


Maximum differential 75 psid @ 70F (5.2 bar @ 21C)

pressure: 40 psid @ 176F (2.8 bar @ 80C)

FDA & USP complianceAll polypropylene material used in manufacturing complieswith the regulations of the Food and Drug Administration(FDA) title 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.1630, as applicable for foodand beverage contact.

Filter Removal EfficiencyBeta Ratio Beta 5000 Beta 100 Beta 50 Efficiency 99.98% 99% 98%

0.2 micron 0.20 0.10 0.05

0.45 micron 0.45 0.30 0.20

1.0 micron 1.0 0.60 0.30

2.5 microns 2.5 2.0 1.5

5.0 microns 5.0 4.0 3.0

10.0 microns 10.0 8.0 7.0

20.0 microns 20.0 17.0 15.0

Beta Ratio =Upstream particle counts

Downstream particle counts

The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guide forselecting cartridges and estimating their performance. Under actual fieldconditions, results may vary somewhat from the values shown due to thevariability of f iltration parameters.Testing was conducted using the single-pass test method, water at2.5 gpm/10'' cartridge. Contaminants included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual laser sourceparticle counters.

Applications

Food & beverage Aqueous solutions Chemicals

Bottled water Pharmaceutical Cosmetics

Process water RO Prefilters Ink

QMA Polypropylene Filter Series


24/76


Pleated Fi l ters

-5-9.75-10-20-30-40

QMA Nomenclature Information

QMA 1 -20 P3 V -R -I

End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreAM Single open end, internal O-RingNPC Double open end, internal O-Ring

Gasket or O-RingS Silicone

B Buna-NE EPDMV VitonT Teflon encap.

Viton (O-Rings only)T Teflon (Gasket only)

Retention Rating (microns)0.20.4512.551020

Nominal Length (inches)Filter TypeQMA Series Filters

Pre-Rinse Option-R Factory

Pre-Rinse

Insert-I End cap insert

for steaming

Example: QMA 1-20P3V-R-I = QMA filter, 1 micron, 20 inches, 222/Flat, Viton O-Rings, pre-rinsed, End cap insert

0 2 4 6 8 10 USGPM

0 7.6 15.1 22.7 30.3 37.9 LPM

.14

.07

0


Bar PSI

* For liquids other than water, multiply pressure drop byfluid viscosity in centipoise

0.2 m0.45 m

1m

10 m

5m

Flow Rate* Polypropylene Filter @ 70F (21C)(per 10''cartridge)

2.5 m

2

1

0

20 m

QMA FLOW RATE

Performance SpecificationsSanitization

Hot water at 176F (80C) at 5 psid (0.35 bar) for 30 min.

In-line steam at 257F (125C) at 1psid (0.07 bar) for 30 min.

Autoclavable at 257F (125C) for 30 min.




High Efficiency Polypropylene Filter CartridgeAn innovative product manufactured with multiple layers ofmelt blown polypropylene media. This unique structure allowshigh flow rates while maintaining low differential pressureand ideal depth filtration characteristics.

Filter Features Benefits Micron ratings from 0.1 to 10 m Broad application

range


FDA listed materials of construction

High Filtration Efficiency 95%

Graded pore structure Multilayer, media for high dirtholding capacity

Fixed pore construction Resists dirt unloading atmaximum differential pressure

Polypropylene construction Inert to many process fluids

Various Gasket/O-ring materials Compatible with manyfluids


Construction material: Polypropylene

Gasket/O-Rings: Buna-N, EPDM, Sil icone, Viton, TeflonEncapsulated Viton (O-Rings only)

Micron ratings: 0.1, 0.2, 0.4, 0.6, 1.0, 3.0, 5.0, 10.0m


Nominal lengths: 9.75, 10, 20, 30, 40(24.8, 25.4, 50.8, 76.2, 101.6 cm)



Maximum operatingtemperature: 176 F (80C)

Maximum 80 psid @ 70F (5.5 bar @ 21C) differential pressure: 40 psid @ 176F (2.8 bar @ 80C)


Recommended changeoutpressure: 35 psid (2.4 bar)

Applications

Food & beverage RO Prefilters DE trap

Aqueous solutions Chemicals Photoresists

Pharmaceuticals Cosmetics

Ultrapure water Ink

Filter Removal EfficiencyBeta Ratio Beta 100 Beta 20 Efficiency 99% 95%

0.1 micron 0.8 0.1

0.2 micron 1.0 0.2

0.4 micron 2.0 0.4

0.6 micron 3.0 0.6

1.0 micron 6.0 1.0

3.0 micron 14 3.0

5.0 microns 17 5.0

10.0 microns 25 10.0



In-line steam at 257F (125C) at 1psid (0.07 bar) for 30 min.

Autoclavable at 257F (125C) for 30 min.


All materials comply with FDA title 21 of the Code ofFederal Regulations as applicable for food and beveragecontact.

QMC Polypropylene Filter Series


26/76


Pleated Fi l ters

-5-9.75-10-20-30-40

QMC Nomenclature Information

QMC 1 -20 P3 V

End Configuration

P Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreAM Single open end, internal O-RingNPCDouble open end, internal O-Ring


Viton (O-Rings only)Retention Rating (microns)

0.10.20.40.613510

Nominal Length (inches)Filter TypeQMC Series Filters

Example: QMC 1-20P3V = QMC filter, 1 micron, 20 inches, 222/Flat, Viton O-Rings

T Teflon (Gasket)

0 1 2 3 4 5 6 7 8 9 10 GPM

0 7.6 15.1 22.7 30.3 37.9 LPM

2.1

1.8

1.5

1.2

0.9

0.6

0.3

0

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0


Water at Ambient Temperature(per 10''cartridge)Bar PSI

Flow Rate

0.1 m

0.2 m

0.4 m

0.6 m

1.0 m

3.0 and

5.0 m

10.0 m

QMC WATER FLO W RATES




Health Dangers of CryptosporidiumIn recent years, significant outbreaks of water borne diseasehave been traced to Cryptosporidium and Giardia parasites.These naturally occurring organisms are present in manysurface water sources and are highly resistant to inactivationby conventional water treatment processes such as chlori-nation. Healthy individuals typically recover from thecommon gastrointestinal effects within a few weeks, howeverfor individuals with weakened or undeveloped immunesystems, it can be life threatening.

In order to ensure the safety of the water supply, standardshave been established that define the minimum performancerequirements for materials and components of water treatmentsystems. The QCR Cyst Reduction filter contains an absolute1 micron filter media designed to exceed the ANSI/NSF

Standard 53 of 99.95% for the removal of cysts based uponthe polystyrene challenge in water*.

Filter FeaturesBenefits Constructed entirely of polypropylene

Compatible with most solutions

7.7 ft2 (0.72 m2) of effective filter areaHigh flow rates at low pressure dropHigh dirt capacity

Meets/exceeds NSF Standard 53 for cyst reduction*

Various O-Ring materials and configurationsEasily retrofits most systems

High surface areaHigh flow rates and long on-line service

Meets USP Class VI Biological Test for plastics

FDA Listed MaterialsAll polypropylene material used in manufacturing complieswith the regulations of the Food and Drug Administration(FDA) Title 21 of the Code of Federal regulations 174.5,177.1520 and 177.1630, as applicable for food andbeverage contact.

* Performance tested and verified by Independent Laboratory Testing


Materials

Media: Polypropylene

Core/cage: Polypropylene

End caps: Polypropylene

O-Rings: Silicone O-Ring(other materials optional)

Filter Connections

P2 (226/flat), P3 (222/flat), P7 (226/fin), P8 (222/fin)

Dimensions

Nominal lengths: 9.75, 10, 20, 30, 4025.4, 50.8, 76.2, 101.6 cm)




Maximum differential 75 psid @ 70F (5.2 bar @ 21C)pressure: 40 psid @ 176F (2.8 bar @ 80C)

15 psid @ 190F (1.03 bar @ 88C)

Recommended 35 psid (2.4 bar)change-out:

QCR Cyst Reduction Filter Series


28/76


Pleated Fi l ters

-5-9.75-10-20-30-40

QCR Nomenclature Information

QCR 1 -30 P7 S

End ConfigurationP2 226/Flat Single Open EndP3 222/Flat Single Open End

P7 226/Fin Single Open EndP8 222/Fin Single Open End


Viton (O-Rings only)Retention Rating (microns)

1

Nominal Length (inches)Filter TypeQCR Series Filters

Example: QCR 1-30P7S = QCR filter, 1 micron, 30 inches, 226/Fin, Silicone O-Ring

0 2 4 6 8 10 USGPM

0 7.6 15.1 22.7 30.3 37.9 LPM

2

1

0

.14

.07

0


Bar PSI


1mm

Flow Rate* Polypropylene Filter @ 70F (21C)(per 10''cartridge)

QCR FLOW RATE

Note: DOE style filters not offered in the QCR product. Cyst reduction claim not valid for DOE style filters per NSF standard 53, forbottled water facilities.




Absolute Rated Pleated Filter CartridgesThis all polypropylene filter retains particles with absolute effi-ciency. Available in a broad range of pore sizes, it is suit-able for a wide range of applications. The pleated construc-tion provides a high surface area to offer outstanding overallfiltration economy.

Filter FeaturesBenefits Micron ratings from 0.2 to 100 m Broad application

range

Meets current USP Class VI biological test for plastics Acceptable for food & beverage contact

Absolute Efficiency Rated at 99.98% (Beta 5000)

Competitive surface area High flow rates, and long on-line service Minimize maintenance cost

Fixed pore structure Eliminates dirt unloading atmaximum differential pressure

Polypropylene Construction Inert to many process fluids

Various Gasket/O-Ring materials Compatible with a vari-ety of fluids

Manufactured in continuous lengths up to 40 inches



Inner core: Polypropylene


Cage: Polypropylene

Gaskets/O-Rings: Buna-N, EPDM, Sil icone, Viton, TeflonEncapsulated Viton (O-Rings only)

Polypropylene micron 0.2, 0.45, 1.0, 2.5, 5.0, 10, 25,ratings: 50, 100m





Maximum operating 176 F (80 C)temperature:

Maximum 75 psid @ 70 F (5.2 bar @ 21C)differential pressure: 40 psid @ 176 F (2.8 bar @ 80C)

Recommended change-out pressure for disposal: 35 psid (2.4 bar)


0.2 micron 0.20 0.10 0.05

0.45 micron 0.45 0.30 0.20

1.0 micron 1.0 0.60 0.30

2.5 microns 2.5 2.0 1.5

5.0 microns 5.0 4.0 3.0

10.0 microns 10.0 8.0 7.0

25.0 microns 25.0 19.0 15.0

50.0 microns 45.0 35.0 28.0

100.0 microns 100.0 85.0



The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guide forselecting cartridges and estimating their performance. Under actual fieldconditions, results may vary somewhat from the values shown due to thevariability of f iltration parameters.Testing was conducted using the single-pass test method, water at3 gpm/10'' cartridge. Contaminants included latex beads, coarse and fine

test dust. Removal efficiencies were determined using dual laser sourceparticle counters.

FDA ComplianceAll polypropylene material used in manufacturing complieswith the regulations of the Food and Drug Administration(FDA) title 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.1630, as applicable for foodand beverage contact.

PMA Polypropylene Filter Series


30/76


Pleated Fi l ters

-5-9.75-10-20-30-40

PMA Nomenclature Information

PMA 2.5 -10 P V


Viton (O-Rings only)T Teflon gasket

Retention Rating (microns)0.20.4512.55102550100

Nominal Length (inches)-

Filter TypePMA Series Filters

Example: PMA 2.5-10PV = PMA filter, 2.5 micron, 10 inches, Double Open End, Viton Gasket



0 2 4 6 8 10 12 GPM

0 7.6 15.1 22.7 30.3 37.9 45.4 LPM

4

3

2

1

0

.28

.21

.14

.07

0


F ow Rate Po ypropy ene Fi ter @ 70F (21C)(per 10''cartridge)Bar PSI

0.2 m

0.45 m

1 m2.5 m

10, 25, 50100 m

5 m

PMA FLOW RATE




Economically Efficient Pleated Filter CartridgesThis cost effective, disposable filter element can be used fora wide range of applications. The filter is constructed ofpleated polypropylene filter media with high surface areathat allows for greater system flow rate.


range

High Filtration Efficiency 90% (Beta 10) rated



Fixed pore structures Resists unloading of captured con-taminant

Polypropylene Construction Inert to many process fluids Various Gasket/O-Ring materials Compatible with a vari-

ety of fluids

Economically efficient filtration

Manufactured in continuous lengths up to 40 inches





Cage: Polypropylene

Gaskets/O-Rings options: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton (O-Rings only)

Micron ratings: 0.2, 0.25, 0.45, 0.5, 1.0, 2.0, 5.0,10, 25, 50m

*Other micron rated media available upon request





Maximum operating 176 F (80C)temperature:

Differential pressure: 75 psid @ 70F (5.2 bar @ 21C)40 psid @ 176F (2.8 bar @ 80C)

Recommended change-out pressure for disposal: 35 psid (2.4 bar)

Filter Removal EfficiencyBeta Ratio Beta 50 Beta 10 Efficiency 98% 90%

0.2 micron 0.28 0.20

0.25 micron 0.35 0.25

0.45 micron 0.6 0.45

0.5 micron 0.7 0.5

1.0 micron 1.5 1.0

2.0 microns 2.7 2.0

5.0 microns 7.0 5.0 10.0 microns 12.0 10.0

25.0 microns 32.0 25.0

50.0 microns 70.0 50.0



The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guide forselecting cartridges and estimating their performance. Under actual fieldconditions, results may vary somewhat from the values shown due to thevariability of f iltration parameters.

Testing was conducted using the single-pass test method, water at

3 gpm/10'' cartridge. Contaminants included latex beads, coarse and finetest dust. Removal efficiencies were determined using dual laser sourceparticle counters.

FDA complianceAll polypropylene material used in manufacturing complieswith the regulations of the FDA title 21 of the Code ofFederal Regulations Sections 174.5, 177.1520, and177.1630, as applicable for food and beverage contact.

PMC Polypropylene Filter Series


32/76


Pleated Fi l ters

-5-9.75-10-20-30-40

PMC Nomenclature Information

PMC 2 -20 P8 V

End Configuration

P Double Open EndP2 226/Flat Single Open End

P3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-RingNPCDouble open end, internal O-Ring


Viton (O-Rings only)T Teflon (Gasket only)


0.20.250.450.5125102550

Nominal Length (inches)Filter TypePMC Series Filters

Example: PMC 2-20P8V = PMC filter, 2 micron, 20 inches, 222/Fin, Viton O-Ring

0 2 4 6 8 10 12 GPM

0 7.6 15.1 22.7 30.3 37.9 45.4 LPM

4

3

2

1

0

.28

.21

.14

.07

0


Flow Rate Polypropylene Filter @ 70F (21C)(per 10''cartridge)Bar PSI

0.25 m0.45 m0.5 m

25 m50 m

5 m

10 m

1 m2 m

0.2 m

PMC FLOW RATE




QXL Polypropylene Filter Series

Absolute Rated Filtration for Inks, Slurriesand CoatingsWith its extra-loft, extra-life depth filter configuration, the QXL isdesigned for the filtration of industrial solutions containingagglomerated particles and gels or with high viscosity.Consistent absolute retention performance is achieved through-out the pleated, serialized microfiber matrix. The state-of-the-artoptimized structure provides significantly higher flow rates andthroughputs than cylindrical melt blown filters.

Filter FeaturesBenefits Hybrid pleated depth construction combines graded pore

structure with high surface area.

Constructed entirely of polypropylene Compatible with a

broad range of solutions and chemicals Optimized pleat configuration Provides the ideal combi-nation of retention, flow rate and throughput

Excellent gel and agglomerated particle retention reduces defects

Available in common end cap configurations Retrofitseasily into most filter housings


Meets USP Class VI Biological test for plastics


Materials


Core,Cage, End Caps: Polypropylene

Gaskets/O-Rings: Silicone, Viton, EPDM, Buna, Teflonencapsulated Viton (O-Rings only)

Micron Ratings: 0.45, 0.5, 1, 3, 5, 10, 20, 40 m


Typical nominal lengths: 9.75", 10", 20", 30", 40"24.8, 25.4, 50.8, 76.2, 101.6 cm

Outside Diameter: 2.7" (6.86 cm)

Inside Diameter: 1.1" (2.79 cm)

Maximum OperatingTemperature: 176F (80C)

Maximum 75 psid @ 70F (5.2 bar @ 21C)Differential Pressure: 40 psid @ 176F (2.8 bar @ 80C)

Maximum ReverseDifferential Pressure: 35 psid @ 80F (2.4 bar @ 27C)

RecommendedChange-out pressure: 35 psid (2.43 bar)

Sterilization: Cartridges may be autoclaved for 30 minutes at 250F (121C) under no end load conditions. May be in-linesanitized with 185F (85C) hot water do not exceed 3 psid.

Conventional pleated polypropylene filter media such asQMA, PMA and PMC

QXL filter media

Applications Inks CMP P-O-U and bulk slurries Adhesives

Paints Beverages Coatings


0.45 micron 0.45 0.3 0.2

0.5 micron 0.65 0.45 0.3

1 micron 1.5 0.8 0.6 3 microns 3 2 1

5 microns 5 4 3

10 microns 10 8 7

20 microns 20 19 17

40 microns 40 35 25


34/76


Pleated Fi l ters

0 2 4 6 8 10 USGPM

0 7.6 15.1 22.7 30.3 37.9 LPM

2

1.8

1.6

1.4

1.2

1

0.8

0.6

0.4

0.2

0

.14

.12

.10

.08

.06

.04

.02


Bar PSI

3m

1 m

0.5 m0.45 m

5 m

10 m

20 m

40 m

F ow Rate Po ypropy ene Fi ter @ 70F (21C)(per 10''cartridge)

QXL FLOW RATE

QXL Nomenclature Information

QXL 5 -10 P8 S


P7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-Ring


Viton (O-Rings only)Retention Rating (microns)0.45*0.5**135

102040


-5-9.75-10-20-30-40

Filter TypeQXL Series Filters

* Special CMP slurry formulation.** Special ink formulation.

Example: QXL 5-10P8S = QXL filter, 5 micron, 10 inches, 222/Fin, Silicone O-Rings




Glass Fiber Cartridges (GFC)This high efficiency, disposable filter element is suited for awide range of applications. The filter is constructed of pleat-ed Borosilicate Microfiberglass filter media with greatersurface area for high system flow rate.


range

Uniform pore size High removal efficiency

High surface area High flow capability and dirt holdingcapacity

Long service life Minimizes maintenance costs

Fixed pore construction Eliminates dirt unloading at

maximum differential pressure

Filter SpecificationsMedia: Borosilicate Microfiberglass with

Acrylic Binder


Support layers: Polyester


Cage: Polypropylene

Gasket/O-Rings : Buna-N, EPDM, Silicone, TeflonEncapsulated Viton O-Rings

Micron rat ings: 0.2, 0.45, 1.0, 3.0, 10, 30 mDimensions and Operating Parameters

Nominal lengths: 9,75 10, 20, 30, 40(24.7, 25.4, 50.8, 76.2, 101.6 cm)



Maximum operatingtemperature: 176 F (80C)

Maximum differential 80 psid @ 70 F (5.5 bar @ 21C)pressure: 40 psid @ 150 F (2.8 bar @ 65C)

Filter Removal EfficiencyBeta Ratio Beta 10 Beta 20 Beta 100 Beta 1000 Beta 5000Efficiency 90% 95% 99% 99.9% 99.98%

0.2 micron 0.2 0.3 0.6 0.8 1.0

0.45 micron 0.45 0.6 0.8 1.8 2.0

1.0 micron 1.0 1.3 2.0 3.5 4.0

3.0 microns 3.0 4.0 5.5 9.0 10.0

10.0 microns 10.0 12.0 15.0 17.0 18.0

30.0 microns 30.0 35.0 38.0 42.0 45.0



The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guide forselecting cartridges and estimating their performance. Under actual fieldconditions, results may vary somewhat from the values shown due to thevariability of f iltration parameters.Testing was conducted using the single-pass test method, water at2.5 gpm/10'' cartridge. Contaminants included latex beads, coarse and

fine test dust. Removal efficiencies were determined using dual laser sourceparticle counters.

Applications

Wine prefiltration Chemicals

Blowdown post filter Inks

Magnetic tape coatings Oil & Gas

GFC Microfiberglass Filter Series


36/76


Pleated Fi l ters

-5-9.75-10-20-30-40

GFC Nomenclature Information

GFC 3 -10 P7 B -I

End Configuration

P Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-Ring



Retention Rating (microns)0.20.45131030

Nominal Length (inches)-

Filter TypeGFC Series Filters

Insert-I End cap insert

for steaming

Example: GFC 3-10P7B-I = GFC filter, 3 micron, 10 inches, 226/Fin, Buna-N O-Rings, end cap insert for steaming

0 2 4 6 8 10 USGPM

0 7.6 15.1 22.7 30.3 37.9 LPM

3.0

2.5

2.0

1.5

1.0

0.5

0

.21

.17

.14

.10

.07

.03

0


Bar PSI


0.2 m

0.45 m

1 m3 m10 m30 m

F ow Rate* @ 70F (21C)(per 10''cartridge)

GFC FLOW RATE




High TemperatureGlass Fiber Cartridges (GFP)This high efficiency, disposable filter element is suited for awide range of applications. The filter is constructed of pleat-ed Borosilicate Microfiberglass filter media with greatersurface area for high system flow rate.

Filter FeaturesBenefits Polyester hardware extends application range beyond the

limits of polypropylene.

Higher temperature capability of 230F (110C)

Micron ratings from 0.2 to 30 m Broad applicationrange

Uniform pore size High removal efficiency

High surface area High flow capability and dirt holdingcapacity

Long service life Minimizes maintenance costs

Fixed pore construction Eliminates dirt unloading atmaximum differential pressure

Filter SpecificationsMedia: Borosilicate Microfiberglass with

Acrylic Binder

Inner core: Polyester

Support layers: Polyester

End caps: Polyester Cage: Polyester

Gasket/O-Rings : Buna-N, EPDM, Silicone, TeflonEncapsulated Viton O-Rings

Micron rat ings: 0.2, 0.45, 1.0, 3.0, 10, 30 m





Maximum operating

temperature: 230 F (110C)Maximum 75 psid @ 70F (5.2 bar @ 21C)differential pressure: 60 psid @ 200F (4.1 bar @ 93C)

50 psid @ 230F (3.4 bar @ 110C)

Recommended change-outpressure for disposal: 35 psid (2.4 bar)

Filter Removal EfficiencyBeta Ratio Beta 10 Beta 20 Beta 100 Beta 1000 Beta 5000 Efficiency 90% 95% 99% 99.9% 99.98%

0.2 micron 0.2 0.3 0.6 0.8 1.0

0.45 micron 0.45 0.6 0.8 1.8 2.0

1.0 micron 1.0 1.3 2.0 3.5 4.0

3.0 microns 3.0 4.0 5.5 9.0 10.0

10.0 microns 10.0 12.0 15.0 17.0 18.0

30.0 microns 30.0 35.0 38.0 42.0 45.0



The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guide forselecting cartridges and estimating their performance. Under actual fieldconditions, results may vary somewhat from the values shown due to thevariability of f iltration parameters.Testing was conducted using the single-pass test method, water at2.5 gpm/10'' cartridge. Contaminants included latex beads, coarse and

fine test dust. Removal efficiencies were determined using dual laser sourceparticle counters.

Applications

Petrochemicals Chemicals

Solvents Inks

Boiler Water Oil & Gas

Lube Oil

GFP Microfiberglass Filter Series


38/76


Pleated Fi l ters

-5-9.75-10-20-30-40

GFP Nomenclature Information

GFP 3 -10 P3 B

End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open End


0.20.45131030

Nominal Length (inches)Filter TypeGFP Series Filters


Viton (O-rings only)

Example: GFP 3-10P3B = GFP filter, 3 micron, 10 inches, 222/Flat, Buna-N O-Rings, endcap

GFP FLOW RATE




Large Geometry Pleated Filters for High FlowGraver High Flow Series filters feature a larger geometry tohandle higher flows with fewer filter elements. The result ismuch faster, easier filter changeouts. In addition, the insideto outside flow allows for excellent dirt holding capacity,extending the time between filter changeouts. Filter housingsare also available and because of the filters high flow anddirt holding capacity, smaller systems are possible, reducingupfront capital costs.

High Flow Series Features - Benefits 6 diameter, large geometry for high flows

Absolute retention ratings from 1 to 100 microns

Capable of flow rates up to 500 GPM in a single 60element


Inside-out flow retains contaminant even during changeout

Multi layer pleated construction with optimized surface area

Outer cage prevents media extrusion problem experiencedwith some competitive offerings

Unique Quad Seal gasket provides maximum seal integrity

Retrofits competitive high flow filter housings

Thermally bonded construction


Media/Support/Cage: PolypropyleneEnd caps: Polypropylene

Gaskets/O-rings: EPDM, Sil icone, Buna N, Viton

Micron ratings: 1, 3, 5, 10, 20, 40, 60, 100

Dimensions

Nominal lengths: 20, 40, 60 inches(50.8, 101.6, 152.4 cm)

Outside diameter: 6.0 in (15.2 cm)

Operating Conditions

Maximum operating 180F@ 20psid (82C @1.4 bar)temperature: 160F@ 30psid (71C @2.1 bar)

77F @ 50psid (25C @ 3.4 bar)

Recommended changeoutdifferential pressure: 35psid (2.4 bar)

Maximum flow rates: 60 element up to 500 GPM (1892 lpm)40 element up to 350 GPM (1325 lpm)20 element up to 175 GPM (662 lpm)

Applications

Water Systems Chemicals Food and Beverage

Filter Removal EfficiencyMicron Rating 99.9% 99% 90% Beta Ratio Beta 1000 Beta 100 Beta 10

1 micron 1 0.6 0.2

3 micron 3 2 1.5

5 micron 5 4 3

10 micron 10 8.5 6.5

20 micron 22 19 14

40 micron 38 18 15

60 micron 60 35 20

100 micron 100 75 45

High Flow Series Filter Cartridges


40/76


Pleated Fi l ters

Note: For chemical compatibility, flow rates, and temperature requirments please consult the factory or your localGraver distributor.

5

Retention Rating(microns)

13510204060100

-60

Length (inches)

204060

High Flow

Product Series

HF-High FlowSeries

High Flow Series Nomenclature Information

E

Gasket or O-Ring

E EPDMS SiliconeB Buna N

V Viton

Example: HF 5-60E = High Flow filter, 5 micron, 60 inches, EPDM

High Flow Series Element Pressure Drop

20" 40" 60" 20" 40" 60"

1 0.0200 0.0097 0.0065 6.0845 2.9395 1.9820

3 0.0167 0.0081 0.0054 5.0705 2.4495 1.6516

5 0.0076 0.0037 0.0025 2.3179 1.1198 0.7550

10 0.0046 0.0022 0.0015 1.3908 0.6719 0.4530

20 0.0021 0.0010 0.0007 0.6374 0.3079 0.2076

40 0.0017 0.0008 0.0006 0.5215 0.2520 0.1699

60 0.0015 0.0007 0.0005 0.4552 0.2199 0.1483

100 0.0010 0.0005 0.0003 0.3035 0.1466 0.0989

Element Pressure Drop psid/gpm Element Pressure Drop Mbar/M3/Hr


42/76



Stratum A Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 20, AbsoluteMelt blown 30, 50, 70 Beta 1000

Stratum C Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 20, NominalMelt blown 50, 75 Beta 10

COAX Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 25, NominalBicomponent/Melt Blown Polyethylene 50, 100, 150

MBF Polypropylene Polypropylene 1, 3, 5, 10, 20, 30, 50, 75 NominalMelt blown

Depth Filters




Absolute Rated Melt Blown FiltersStratum A Series melt blown depth filters deliver 99.9% effi-

ciency at the stated micron for the most demanding applica-tions. By utilizing ultra fine fibers and controlled thermalbonding, the Stratum A series retains captured contaminanteven at higher differential pressures.

Stratum Series Features - Benefits Absolute retention ratings from 0.5 to 70 microns

Multi-zone melt blown depth filter with a graded porestructure for maximum dirt holding capacity

Thermally bonded fibers for high void volume and long on-stream life

Lot traceable filters come with certificate of conformance.

100% polypropylene FDA listed materials of construction All components meet USP Class VI criteria and are safe for

use in pharmaceutical applications

Molded center core for higher temperature and pressurecapability

Free of surfactants, binders and adhesives



End caps/center core: Polypropylene

Gaskets/O-rings: Silicone, EPDM, Buna N, Santoprene,Viton and Teflon encapsulated Viton

(o-rings only)Micron ratings: 0.5, 1, 3, 5, 10, 20, 30, 50, 70

Dimensions

Nominal lengths: 4, 5, 9.75, 10, 19.5, 20, 29.25, 30,39, 40 inches (10.2, 12.7, 24.8, 25.4,

49.5, 50.8, 74.3, 76.2, 99.1, 101.6 cm)

Outside diameter: 2.5 in ( 6.35 cm)

Inside diameter: 1 in (2.54 cm)

Operating Conditions

Maximum differential 150 psid @ 68F (10.3 bar @ 20C)pressure: 90 psid @ 150F (6.2 bar @ 66C)

35 psid @ 176F (2.4 bar @ 80C)


Steam Sterilization: Stratum single open end style filters maybe autoclaved under no end load condi-tions for 30 minutes at 121C. Filtersshould be cooled to normal operatingtemperatures prior to use.

Applications

Chemicals Paint/Ink Water Plating Pharmaceuticals

Food and beverages Microelectronics Cosmetics

Filter Removal EfficiencyMicron Rating 99.9% 99% 90% Beta Ratio Beta 1000 Beta 100 Beta 10

0.5 micron 0.6 0.5 0.4

1 micron 1.0 .8 .5

3 micron 3 2.3 1.4

5 micron 5 4.0 2.7 10 micron 10 7 4

20 micron 20 15 12

30 micron 30 20 14

50 micron 50 34 25

70 micron 70 50 39

StratumA Series Melt Blown Filter Cartridges


44/76


Depth Fi l ters

0.5 m

0 1 2 3 4 5 GPM

0 3.79 7.57 11.36 15.14 18.93 LPM

4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

.28

.21

.14

.07

.00

er

enta

ressure

Bar PSI 1 m

3 m

5 m

10 m

20 m30, 50, 70 m

Flow Rate* @ 70F (21C)(per 10'' cartridge)

Note: For chemical compatibility, flow rates, and tem-perature requirments please consult the factory or yourlocal Graver distributor.

-30

Length(inches)

45

9.7510

19.520

29.253039

40

STA

Product Series

STA - Stratum ASeries

Stratum A Series Nomenclature Information

N

Gasket or O-Ring



Viton (O-Rings only)N None

N

End Configuration

P Double Open End (hard endcaps)P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBGDirect Bond Santoprene Gaskets

AM Single Open End, Internal O-Ring

0.5

RetentionRating

(microns)

0.51351020305070

Example: STA 0.5-30NN = Stratum A filter, 0.5 micron, 30 inches, cut ends, No gasket or o-ring




High Performance FiltersFor critical customer applications requiring precise and

repeatable depth filtration, the Graver Stratum C series meltblown filters deliver exceptional performance. With a multi-zoned construction, true clarifying filtration is achieved withno unloading of captured contaminant.

Stratum Series Features - Benefits Multi-zone melt blown depth filter with a true graded pore

structure

Thermally bonded fibers for high void volume and long on-stream life

Available in precise 90% removal efficiencies from 0.5 to75 microns

100% polypropylene FDA listed materials of construction All components meet USP Class VI criteria and are safe foruse in pharmaceutical applications

Molded center core for higher temperature and pressurecapability

Free of surfactants, binders and adhesives



End caps/center core: Polypropylene

Gaskets/O-rings: Silicone, EPDM, Buna N, Santoprene,

Viton and Teflon encapsulated Viton(o-rings only)

Micron ratings: 0.5, 1, 3, 5, 10, 20, 50, 75

Dimensions

Nominal lengths: 4, 5, 9.75, 10, 19.5, 20, 29.25, 30,39, 40 inches (10.2, 12.7, 24.8, 25.4,

49.5, 50.8, 74.3, 76.2, 99.1, 101.6 cm)

Outside diameter: 2.5 in ( 6.35 cm)

Inside diameter: 1 in (2.54 cm)

Operating ConditionsMaximum differential 150 psid @ 68F (10.3 bar @ 20C)pressure: 90 psid @ 150F (6.2 bar @ 66C)

35 psid @ 176F (2.4 bar @ 80C)


Steam Sterilization: Stratum single open end style filters maybe autoclaved under no end load condi-tions for 30 minutes at 121C. Filtersshould be cooled to normal operatingtemperatures prior to use.

Applications

Chemicals Paint/Ink Water Plating Pharmaceuticals Food and beverages Microelectronics Cosmetics

Stratum C Series Melt Blown Filter Cartridges


46/76


Depth Fi l ters

0 1 2 3 4 5 GPM

0 3.79 7.57 11.36 15.14 18.93 LPM

4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

.28

.21

.14

.07

.00

Differe

ntialPressure

Bar PSI

1 m

3 m

5 m

10 m

20, 50, 75 m

F ow Rate* @ 70F (21C)(per 10'' cartridge)

0.5 m

Note: For chemical compatibility, flow rates, and tem-perature requirments please consult the factory or yourlocal Graver distributor.

-10

Length(inches)

45

9.7510

19.520

29.253039

40

STC

Product Series

STC - Stratum CSeries

Stratum C Series Nomenclature Information

V

Gasket or O-Ring




P3

End Configuration

P Double Open End (hard endcaps)P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBGDirect Bond Santoprene Gaskets

AM Single Open End, Internal O-Ring

5

RetentionRating

(microns)0.513510205075

Example: STC 5-10P3V = Stratum C filter, 5 micron, 10 inches, 222/Flat Single Open End, Viton




Two Stage Depth Filter CartridgeThe COAX Depth Filter cartridge is an integral two stagedepth filter. The first stage is made of nonwoven melt blownpolypropylene to trap coarser particles. The second stageinner core is composed of a bicomponent polypropyleneand polyethylene fiber to provide fine particle retention. Thisunique design provides a true graded density that offers amarked increase in useful life and dirt capacity. In addition,the rigid nature means there is no flexing of the cartridge andgreatly reducing media migration and particle unloading.

Filter FeaturesBenefits Two stage graded density melt blown depth filter

Maximizes dirt holding and useful life

Inert pure polyolefin construction, non-shedding media Broad chemical compatibility

Low extractables

Meets USP Class VI standards Acceptable for use infood, beverage and pharmaceutical applications

Extensive range of lengths and configurations


Applications

Paint Perfumes Cutting Oils

CMP Slurries Magnetic Slurries Corn Syrup

Plating Solutions Pre R.O. Coatings

COAX Filter Specifications

Media: Thermally bonded Polypropylene/polyethylene fiber

End caps: Polypropylene (when used)

Gaskets/O-Rings: Silicone, Viton, EPDM, Buna-N

Micron ratings: 0.5, 1, 3, 5, 10, 25, 50, 100, 150m


Nominal lengths: 9.75", 10, 20, 30, 40(24.8, 25.4, 50.8, 76.2, 101.6 cm)




Maximum operating 100 psid @ 70F (7 bar @ 21C)pressure: 2 psid @ 176F (0.14 bar @ 80C)

Filter Removal EfficiencyBeta Ratio Beta 100 Beta 20 Beta 10 Efficiency 99% 95% 90%

0.5 micron 4.0 2.0 0.5

1.0 micron 8.0 3.0 1.0

3.0 micron 12.0 5.0 3.0

5.0 micron 20.0 8.0 5.0

10.0 micron 30.0 13.0 10.0

25.0 micron 50.0 30.0 25.0

50.0 micron 100.0 60.0 50.0

100.0 micron 200.0 125.0 100.0

150.0 micron 250.0 200.0 150.0



Autoclavable at 257F (125C) for 30 min. (Basic DOEconfiguration)

COAX Melt Blown Filter Series


48/76


Depth Fi l ters

0 5 10 15 GPM

0 19 38 56 LPM

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

0.24

0.21

0.17

0.14

0.10

0.07

0.03

0


Water at Ambient Temperature (per 10'' cartridge)bar psi

1.0 m

3.0 m

5.0 m

10.0 m

25.0 m

50.0 m

100.0 m150.0 m

0.5 m

COAX FLOW RATE

-5-10-20-30-40

COAX Nomenclature Information

COAX 25 -40 RL P3 B

End Configuration

P Double Open End (hard end caps)P2 226/Flat Single Open EndP3 222/Flat Single Open End

P6 Self- Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndN NonePX Extended CoreAM Single open end, internal O-Ring


Viton (O-Rings only)N NoneRetention Rating

(microns)

0.5135

10255075100

NominalLength(inches)

Filter TypeCOAX Series Filters

Length OptionBlankStandard lengthRL Reduced length

Example: COAX 25-40RLP3B = COAX filter, 25 micron, 40 inches, Reduced Length, 222/Flat, Buna-N O-rings

DBGDirect Bond Gaskets




Melt Blown FiltersAn economical, disposable, filter element that can be usedin a wide range of applications. The MBF depth filter is con-structed of 100% polypropylene media for chemical compati-bility with a variety of process fluids.

Filter FeaturesBenefits Available in nominal ratings from 1 to 75 microns

Graded pore construction for long on- stream life

Melt blown media resists dirt unloading as differential pres-sure increases

Non-shedding, fibrous center core

High dirt holding capacity

FDA listed polypropylene media

Economical depth filtration

Thermal bonded endcaps optional

Free of binders, adhesives and surfactants

Applications

Food & beverage Aqueous solutions Chemicals

Blowdown post filter Wastewater Rad waste

Magnetic tape coatings RO Prefilters Ink



End caps: PolypropyleneGaskets/O-Rings: Silicone, Viton, EPDM, Buna-N

Micron ratings: 1, 3, 5, 10, 20, 30, 50, 75m


Typical nominal lengths: 9.75", 10, 20, 30, 40(24.8, 25.4, 50.8, 76.2, 101.6 cm)Other lengths available

Outside diameter: 2.5 (6.35 cm), 2.75 (6.99 cm) Endcapped


Maximum differential 50 psid @ 70 F (3.45 bar @ 21C)pressure: 25 psid @ 140 F (1.72 bar @ 60C)

Recommended change-out pressure for disposal:35 psid (2.4 bar)

FDA listed materialsAll polypropylene material used in manufacturing complieswith the regulations of the Food and Drug Administration(FDA) title 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.1630, as applicable for foodand beverage contact.

MBF Melt Blown Filter Series

0 1 2 3 4 5 6 7 8 9 10 GPM

0 7.6 15.1 22.7 30.3 37.9 LPM

.45

.4

.35

.3

.25

.2

.15

.1

.05

0

0.031

0.028

0.024

0.021

0.017

0.013

0.010

0.007

0.003

0

CleanPressureDrop

PSIDBAR

Flow Rate, Water at 68F (20C)bar psi

30 m

50 m

75 m

1 3 5 10 20 m

MBF FLOW RATE VS PRESSURE D IFFERENT IAL


50/76


Depth Fi l ters

-5-9.75-10-19.5-20-29.25-30-39-40

MBF Nomenclature Information

MBF 10 -20 N N

End Configuration

P Double Open End (hard endcaps)P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self- Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut ends)DBGDirect Bond Gaskets



Retention Rating (microns)13510203050

75

Nominal Length (inches)Filter TypeMBF Series Filters

Example: MBF 10-20NN = MBF filter, 10 micron, 20 inches, No End Caps, No Gaskets or O-rings


52/76



TPM Titanium Titanium 0.5, 2, 5, 10, 15, 35 NominalSintered Powder Metal Beta 200

Steris Repl Filters PES membrane or Polypropylene 0.2 Nominal orPleated polypropylene sheet Absolute

RTEC Acrylic/Phenolic Polyester 5, 10, 25, 50, 75, 100 NominalResin bonded available

GCAP Any Polypropylene Any Per filterEncapsulation selected

CarbTEC Powder carbon, Polypropylene 0.5, 2, 5 NominalCarbon block LDPE

Specialty Filters




Titanium Porous Metal TechnologyTPM series filters are porous titanium filters designed forapplications involving heat, gases, aggressive chemicals,cryogenics or polymers. Made from titanium powder, that issintered to form a rugged, fixed pore structure, TPM filtersare made to withstand temperature extremes, high pressuresand repeated cleaning/backwash cycles. There are no lon-gitudinal seams, for improved mechanical strength and corro-sion resistance. TPM filters are produced in a range of con-figurations and micron ratings to perform in a variety of liq-uid and gas applications.

Filter Features Benefits Constructed entirely of sintered titanium powder

Offers high corrosion resistance

Cleanable/Backwashable Allows for re-use Maximum economy

High Temperature Sintering No media migration

Various gasket/O-Ring materials and configurations Easily retrofits most systems


Media: Titanium

End caps: Titanium

Gasket/O-Rings EPR, Buna -N, Viton, TeflonEncapsulated Viton (O-Rings only)


P (DOE), P2 (226/flat), P3 (222/flat), M1 (3/4 male NPT),M2 (1 male NPT)

Nominal lengths: 10, 20, 30,(25.4, 50.8, 76.2cm)

Outside diameter: 2.75 (70 mm) or 2.36 (60 mm)

Maximum operatingtemperature: 700F (371C)*

Maximum differential 250 psid (17.4 bar) forwardpressure: 50 psid (3.5 bar) reverse

* Max temperature applicable to NPT style filters only (No O-Rings orgaskets). Consult Graver Technologies for guidance on specific chemi-cal/temperature compatibility.


0.5 micron 0.5 micron 0.3 micron 0.1 micron

2 microns 2 micron 0.8 micron 0.4 microns

5 microns 5 micron 3 microns 1 microns

10 microns 10 microns 8 microns 5 microns





Applications

Corrosive liquids and gases Cryogenic fluids

High viscosity solutions Process steam

Graver Catalog 2012.pdf

Documents

Transcript of Graver Catalog 2012.pdf