Grass Harvesting Contents Grass Harvestingmchc.ie/uploads/catalogues/Machinery_Grass_2013.pdfGrass...
Transcript of Grass Harvesting Contents Grass Harvestingmchc.ie/uploads/catalogues/Machinery_Grass_2013.pdfGrass...
Grass Harvesting Contents
3www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
Grass HarvestingMowers, Tedders, Swathers, Harvesters, Balers, Silage Wagons
Bellon 4
Claas 4 - 8
Farendlose 9
Fella 10 - 11
Fort 11
Fortschritt 11
Galfre 12
Garnier 12
Grasshopper 12
JF-Stoll 13 - 14
John Deere 15 - 20
Kemper 21
Kidd 21
Krone 22 - 25
Kuhn 26 - 32
Kverneland: 33 - 61
Deutz-Fahr 33 - 39
PZ 40 - 50
Taarup 51 - 56
Vicon 57 - 61
Lely 62 - 67
Malone 68
Marangon 68
Massey Ferguson 68
McHale 69 - 70
New Holland 70 - 71
Niemeyer 72
Pottinger 73 - 75
Strautmann 76
Grass Harvesting Bellon / Claas
4www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Bellon Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 21Length: 108Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120108
D4L, D5L, D6L to 1997
LH Shown
Hole Size: 16.25Length: 93Width: 40
Thickness: 3
LH Twisted blade(Box Qty 25) - 56151200
RH Twisted blade(Box Qty 25) - 56151300
Parts to suit Claas Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
DISCO 210, 250, 260, 290, 300, 340, 3000, 3050, 8500
RH Shown
Hole Size: 19Length: 115Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 952043
RH Twisted blade(Box Qty 25) - 952042
Thread: M12Length: 24Width: 32
Collar: 17.5
Blade holder - 952346
Hole Size: 10.5Main Hole: 70Length: 400Width: 250
Cutting discfor bolt on blade
holder- 951510
Skid for bolt on blade holder - 935463
Hole Size: 10.5Main Hole: 70Length: 385Width: 116
Quick fi t blade holder - 938597
Hole Size: 10.5Main Hole: 70Length: 400Width: 250
Cutting discfor quick fi t blade
holder- 952340
Skid for quick fi tblade holder - 933376
Skid protectionplate (suits both types of skids)
- 938966
These models of Claas Grass Mowers use the PW480 series of PTO shafts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
CORTO 165, 210, 250, 290,310
LH Shown
Hole Size: 19Length: 105Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - 9041786
RH Twisted blade(Box Qty 25) - 9041776
Hole Size: 18.5Hole Distance: 55
Length: 160Width: 95
Blade holder 947.427.2 9474271
Grass Harvesting Claas
5www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Claas Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
VOLTO 52
Length: 370Width: 135Curl ID: 46
Thickness: 9.5
Tine - 956815
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
VOLTO 770
Length: 370Width: 135Curl ID: 46
Thickness: 9.5
Tine - 956815
Length: 370Width: 140Curl ID: 44
Thickness: 10
Heavy duty tine - 956907
Parts to suit Claas Grass SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
LINER 880, 2800, 2900
Length: 592Width: 86Curl ID: 49
Thickness: 9
Tine - 9554830
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
LINER TWIN ROTOR880L, 1500, 1550, 3000
Length: 635Width: 95Curl ID: 40
Thickness: 9.5
Tine - 9557100
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Parts to suit Claas Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
WM20 / 24 / 26 / 31F
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Hole Size: 18.5Hole Distance: 55
Length: 158Width: 95
Blade holder 921.065.1 9210650
Grass Harvesting Claas
6www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Claas HarvesterTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
JAGUAR 800 / 600
Length: 190Width: 76Curl ID: 28
Thickness: 6
Tine - 986290
Length: 950mmWidth: 45
Holes distance:50 / 75
Band - 918445
ID: 35OD: 72
Height: 38.9
Regreasablebearing GRAE35NPPB
Length: 380Width: 90
Thickness: 8.5
LH Knife - 984670
RH Knife - 984671
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Length: 23018 Spline - 1 3/8"
Splined shaftto suit header
pick up- 677501A
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Claas
7www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Filters to suit Claas Self Propelled Harvesters
TO SUIT MODELS AIRINNER
AIROUTER
FUEL FUEL /WATER
SEP.
OIL HYD. CAB AIR
820, 840 AF4523 AF1802 FF5054(x2)
- LF3327
HF35345(pump)
HF35200(tank top)LF4014(spin on)
AF27859
830, 850 AF25230 AF25062 FF5405
FS19532(sensor port)
FS19932(no sensor)FS20403
(fi nal fi lter)
LF3327 HF35345 AF27859
860, 880 AF25230 AF25062 FF5054(x2)
- LF3327
HF35345(pump)
HF35200(tank top)LF4014(spin on)
AF27859
870, 890 AF25230 AF25062 FF5405
FS19532(sensor port)
FS19932(no sensor)FS20403
(fi nal fi lter)
LF3327(870 only)LF3829
(890 only)
HF35345 AF27859
900 AF25230 AF25062 FF5405
FS19532(sensor port)
FS19932(no sensor)FS20403
(fi nal fi lter)
LF3829 HF35345 AF27859
Grass Harvesting Claas
8www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Claas BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
ROLLANT 45, 46, 46RC, 66
Length: 190Width: 74Curl ID: 30
Thickness: 5
Tine 86035108214211 8214211
Length: 355Width: 190
Thickness: 5 Knife - 8234221
ID: 11.5OD: 35
Height: 15.5Cam bearing - 393480
ROLLANT 34, 44, 62, 85
ROLLANT 374RF/RC, 375RC, 454RC, 455RC
VARIANT 360, 365, 380, 385
Length: 206Width: 75Curl ID: 30
Thickness: 5
Tine 8072972 8072972
ID: 11.5OD: 35
Height: 15.5Cam bearing - 393480
ROLLANT 250, 260K/P, 280K, 330K/P/S, 440K/P/S
ROLLANT 255, 354
Length: 195Width: 69Curl ID: 29
Thickness: 5.5
Tine 9182380 918238
Length: 191Width: 70Curl ID: 29
Thickness: 5.5
Outer tine 848.381.0 848381
- Knife - 8510220
ID: 11.5OD: 35
Height: 15.5Cam bearing - 393480
ROLLANT 250, 254, 255
Length: 195Width: 69Curl ID: 29
Thickness: 5.5
Tine 9182380 918238
Length: 191Width: 70Curl ID: 29
Thickness: 5.5
Outer tine 848.381.0 848381
- Knife 8377790
ID: 11.5OD: 35
Height: 15.5Cam bearing - 393480
All above models 16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Grass Harvesting Claas
8awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Push switch to suit Claas BalerTO SUIT MODELS OEM NUMBER PART NUMBER- - 1716000018
Grass Harvesting Farendlose
9www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Farendlose Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 19Length: 99Width: 40
Thickness: 3
Straight blade(Box Qty 25) - 99
Parts to suit Farendlose Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Side Delivery Rake
Length: 280Width: 61Curl ID: 44
Thickness: 6
Tine 66221000 5034
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Fella
10www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Fella Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
KM165
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Hole Size: 19Length: 96Width: 40
Thickness: 3
Cranked blade(Box Qty 25) - 96C
Thread: M10Length: 30Width: 18.5Collar: 15
Blade holder 101004478.415 174841501
- V Belt - SPA3000(4 per mower)
KM166, KM167, KM187, KM191, KM192, KM255, KM230, KM250, KM251, KM260, KM270, KM280, KM286, KM300, KM310SM215
LH Shown
Hole Size: 19Length: 98Width: 48
Thickness: 4
LH Blade(Box Qty 25) - 121712
RH Blade(Box Qty 25) - 121713
Thread: M10Length: 30Width: 18.5Collar: 15
Blade holder 101004478.415 174841501
-
V Belt
KM166 SPA3082- KM191, KM192 SPA3350- KM250 540RPM SPB2800- KM250 1000RPM SPB2500
SM165, SM167, SM168, SM206, SM207, SM208, SM240, SM247, SM248, SM288
LH Shown
Hole Size: 19Length: 106Width: 48
Thickness: 4
LH Blade(Box Qty 25) - 122329
RH Blade(Box Qty 25) - 122330
Thread: M12x1.25Length: 26Width: 30Collar: 18
Blade holder 426.887426.053 122181126287
SM260F, SM310, SM311, SM313, SM400, SM401, SM900, SM1100
LH Shown
Hole Size: 19Length: 118Width: 48
Thickness: 4
LH Blade(Box Qty 25) - 133074
RH Blade(Box Qty 25) - 133075
Thread: M12x1.25Length: 26Width: 30Collar: 18
Blade holder 426.887426.053 122181126287
FKM2, FKM2H, FKM180
Thread: M10Length: 26Width: 30
Collar: 16.5
Blade holder 477.263477.274 477263274
Grass Harvesting Fella / Fort / Fortschritt
11www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Fella Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBERTH401H, TH410H, TH430H, TH450H, TH800H, TH520D, TH601D, TH700D, TH440DH, TH450DH,TH520DH, TH540DH, TH620DH, TH660DH, TH680DH, TH800DH, TH900DH, TH530, TH790, TH1100, TH1300, TH800Trans, TH900Trans, TH901Trans,TH1100Trans,TH1101Trans,
Length: 390Width: 96Curl ID: 53
Thickness: 9.5
Tine 150862 487922
Parts to suit Fort Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
- LH Shown
Hole Size: 16.5Length: 98Width: 45
Thickness: 3.5
LH Blade(Box Qty 25) - 98SX
RH Blade(Box Qty 25) - 98DX
Thread: M10Length: 28Width: 30Collar: 16
Originalblade holder 56210100 56210100
Economyblade holder - 56210100E
-
LH Shown
Hole Size: 16.5Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) - 014760
RH Blade(Box Qty 25) - 014768
-
LH Shown
Hole Size: 21Length: 129.5
Width: 47Thickness: 4
LH Blade(Box Qty 25) - 129MEL
RH Blade(Box Qty 25) - 129MER
Parts to suit Fortschritt Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
LH Shown
Hole Size: 19Length: 98Width: 48
Thickness: 4
LH Blade(Box Qty 25) - 121712
RH Blade(Box Qty 25) - 121713
Grass Harvesting Galfre / Garnier / Grasshopper
12www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Galfre Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 21Length: 108Width: 47
Thickness: 3
Flat blade(Box Qty 25) - 495806
Hole Size: 21Length: 108Width: 47
Thickness: 2.8
Cranked blade(Box Qty 25) - 495807
CM170
LH Shown
Hole Size: 21Length: 108Width: 47
Thickness: 4
LH Blade(Box Qty 25) - 3428107005
RH Blade(Box Qty 25) - 3428107006
Parts to suit Garnier Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 18.25Length: 117Width: 41
Thickness: 4.3
Flat blade(Box Qty 25) FR152.327 FR152327
Parts to suit Grasshopper Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole: 21 x 18.25Length: 129Width: 44
Thickness: 5
Flat blade(Box Qty 25) - AEL
Grass Harvesting JF-Stoll
13www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit JF-Stoll Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 20.5Length: 90Width: 42
Thickness: 4
Flat blade(Box Qty 25) - 2220101A
2000
LH Shown
Hole Size: 19Length: 110Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 13800031
RH Twisted blade(Box Qty 25) - 13800032
CMT245
Hole: 20.5x24.3Length: 94Width: 50
Thickness: 4
Flat blade(Box Qty 25) 13800001 2222291
LH Shown
Hole: 20.5x24.3Length: 92.5
Width: 48Thickness: 4
LH Twisted blade(Box Qty 25) 13800021 2222317X
RH Twisted blade(Box Qty 25) 13800022 2222318X
- V-Belt - D351
- V-Belt Conditioner belt for OLD mower
B63(4 per mower)
- V-Belt Conditioner belt for NEW mower
C61(2 per mower)
Rotary MowersCM170, CM190, CM225, CM1900, CM2250,CMT2800
Hole Size: 19Length: 97Width: 50
Thickness: 4
Flat blade(Box Qty 25) - 13800025
LH Shown
Hole Size: 19Length: 97Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 13800023
RH Twisted blade(Box Qty 25) - 13800024
- V-Beltto suit CM1900 - SPB3150
Disc MowersGD2400, GD2800, GD3200, GMS2800, GMS3200, GX2400S, SB2400, SB2800
Hole: 20.5x23Length: 132Width: 50
Thickness: 4
Flat blade - 13800013
LH Shown
Hole Size: 19Length: 97Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 13800023
RH Twisted blade(Box Qty 25) - 13800024
Grass Harvesting JF-Stoll
14www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit JF-Stoll Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Z585, Z685, Z765
Length: 397Width: 108Curl ID: 52
Thickness: 10
LH Rotation - 0673743
RH Rotation - 0673744
Z450D, Z550D,Z450 / Z550 / Z660 HYDRO, SPEED 580 / 680 / 900 HYDRO,Z-PRO from 1998
Length: 380Width: 105Curl ID: 52
Thickness: 9.5
Tine - 0673740
- Tine holder 0673700
- Tine holder 0673720
- Clamp bar 0673730
R 231 / 281 / 282 / 311 / 311DV / 331D / R 285DS / 315DS / 335DS / 385DS / 415DS / 655DS / 655 AS R 780Hydro / 370 / 420 / 460 / 1400 / 1405 / 1425
Length: 520Width: 90Curl ID: 41
Thickness: 9
Tine - 0699780
Hayfl ash
Length: 264Width: 61Curl ID: 52
Thickness: 6.5
Tine 929202
Parts to suit JF-Stoll HarvesterTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
FCT850 / 900 / 1050 /1100 / 1350ES3500 / 3600
Length: 150Width: 74Curl ID: 24
Thickness: 5
Pick up tine 14350027 14330506
Length: 150Width: 74Curl ID: 24
Thickness: 5
Outer pick up tine - 14350026
Grass Harvesting John Deere
15www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit John Deere Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
1320, 1326, 1327LH Shown
Hole Size: 16.25Length: 95Width: 45
Thickness: 3.5
LH Blade(Box Qty 25) - 56151210
RH Blade(Box Qty 25) - 56151310
Thread: M10Length: 28Width: 30Collar: 16
Originalblade holder 56210100 56210100
Economyblade holder - 56210100E
1350, 1360, 1365
RH Shown
Hole Size: 18.25Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) 55903210 55903210
RH Blade(Box Qty 25) 55903310 55903310
Thread: M12Length: 33Width: 30Collar: 18
Originalblade holder to suit mower with
Kuhn Bed
56115800
Economyblade holder 56115800E
-Blade bolt only
to suit mower withJohn Deere Bed
E92221
Blade nut only E80242
Disc to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 DC26705 55911100
Knife Bed Gear to suit John DeereTO FIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 DC23355 55900110
Stone Guard (Outer) to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 DC34130 DC34130
Stone Guard (Middle) to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 DC23289 559012001350, 1360, 1460, 1470 Economy Type 55901200E
Stone Guard (Middle) to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1365 DC50000 DC50000
Grass Harvesting John Deere
16www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bearing to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 DC23368 81103573
Skid to suit John Deere Grass MowerTO SUIT MODELS OEM NUMBER PART NUMBER1365 CC50001 CC50001
Skid (Square Hole) to suit John Deere Grass Mower TO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 CC26700 55911400
Canvas Belt to suit John DeereTO SUIT MODELS OEM NUMBER PART NUMBER1360, 1365 DC33867 DC33867
Elastic Coupling to suit John DeereTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 CC20334 83030002
Conditioning Finger c/w Bush to suit John DeereTO SUIT MODELS OEM NUMBER PART NUMBER1340, 1350, 1360 DC35660 DC35660
Spring Steel Bush to suit John DeereTO SUIT MODELS SIZE OEM NUMBER PART NUMBER1350, 1360 16 x 22 x 16 CC26358 CC26358
Weld-On Rotor Clip to suit John DeereTO SUIT MODELS OEM NUMBER PART NUMBER1350, 1360, 1460, 1470 CC19240 CC19240
Fitting Pin, Bolt & Nut to suit John DeereTO SUIT MODELS TYPE OEM NUMBER PART NUMBER1340, 1350, 1360
Old models Pin CC19048 CC19048
New modelsBolt CC118811 CC118811Nut A31869 A31869
Grass Harvesting John Deere
17www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Genuine Walterscheid PTO parts to suit John Deere MowersTYPE DESCRIPTION OEM NUMBER PART NUMBER
W2500 Cross (36x89) (A5) AW24688 360000
W2500 Yoke Q.S. - 1 3/8" 6 spline DC28998 368300
W2500 Yoke inner type (S4) (A6) W38281 3613100
W2500 Yoke outer type (S5) (A6) W37527 3614100
W2500 Yoke 1 3/8" 21 spline M12 pinch bolt DC31592 361006
W2500 Yoke 1 3/8" 21 spline M14 pinch bolt - 3610111
W2500 Yoke 1 3/8" 6 spline M12 pinch bolt - 361008
W2500 Yoke hex DC39151 3618135
Genuine Walterscheid PTO Shafts to suit John Deere MowersNo. SERIES ENDS TO SUIT MODELS APPLICATION PART NUMBER
1 W25001 3/8" 6 spline Yoke /
free wheel on tubing and fl ange for clutch mower drive
1365 Mower Main gearbox drive shaft WWE25801260
2 W2500 1 3/8" 6 spline Yoke QR /21 spline 1 3/8" M14 Bolt 1360 / 1365 Mower Tractor to mower with
drawbar connection W2510103610111
3 W2500 1 3/8" 6 spline Yoke QR /hex end (3618135) 1365 Mower Tractor to mower with
linkage connection W2510103618135
4 - Over run joint for hook upF5 freewheel c/w S4 tube 1350 - 1365 - 5611742
- Replacement guard to suit tractor to mower shafts SD251000
1
2
3
4
Grass Harvesting John Deere
18www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit John Deere Self Propelled HarvesterTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
6000 Series
Length: 170Width: 73Curl ID: 28
Thickness: 5
Pick up tine - CC25176
Length: 160 / 172Width: 86
Thickness: 7Knife - Z69500
- Sharpening stone - AZ53757
7000
Length: 170Width: 73Curl ID: 28
Thickness: 5
Pick up tine - CC25176
- Knife - Z81123
- Sharpening stone - AZ56626
7500
Length: 170Width: 73Curl ID: 28
Thickness: 5
Pick up tine - CC25176
Length: 160 / 172Width: 86
Thickness: 7Knife - Z69500
- Sharpening stone - AZ56626
Grass Harvesting John Deere
19www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Filters to suit John Deere Self Propelled Harvesters
TO SUIT MODELS
AIRINNER
AIROUTER
FUEL FUEL /WATER
SEP.
OIL HYDRA-ULIC
HYDRO-STATIC
TRANS-MISSION
6850 - 6950 AF25229M(AZ45867)
AF25228M(AZ45868)
FF5506(RE506428)
FS19574(RE502203)
LF9010(RE58935)
HF6338(AT120444)
HF6557(AH128449) -
6810 - 6910 AF820M(U44956)
AF4583M(AZ39761)
FS1212(RE42050) -
LF3363(RE21058)
HF6338(AT120444)
HF6557(AH128449) -
Cummins Engine LF3000
(RE44647)Engine bypassLF777
(RE42051)
7000 Series
7200-7300 AF25229M(AZ45867)
7200-7300 AF25228M(AZ45868)
7200FF5768
(R502778)7200
FS19688(RE522372)
7200LF16043
(RE509672)
HF28813(AZ64238)
HF6557(AH128449)
HF30747(AL112936)7400, 7800
AF25230(AZ61134)
7400, 7800AF25062(AZ61133)
7300-7700FF5716
(RE507284)
7300-7700LF9010
(RE58935)7800
FS1007(PMFS1007)
7800LF9070
(PMLF9000)
Parts to suit John Deere Round BalersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
568, 575, 578, 580, 582, 590, 592
Length: 170Width: 73Curl ID: 28
Thickness: 5
Pick up tine - CC25176
Length: 388Width: 195
Thickness: 5Knife - CC45488
575, 580, 590
Length: 170Width: 73Curl ID: 28
Thickness: 5
Pick up tine - CC25176
Length: 360Width: 200
Thickness: 5Hole size: 21
Knife - CC45141
Length: 365Width: 202
Thickness: 5Hole size: 23
Knife - CC52821
Grass Harvesting John Deere
20www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Genuine Walterscheid PTO parts to suit John Deere BalersTYPE DESCRIPTION OEM NUMBER PART NUMBER
WWE2480 Cross (32x27x76x94) AW23612 350600
W2400 Cross (32x76) AW23611 350000
W2400 Inner tube yoke AW24191 351310
W2400 Outer tube yoke E75143 351410
W2400 Yoke QR 1 3/8" 6 spline DC34615 358310
Genuine Walterscheid PTO Shaft to suit John Deere BalersDESCRIPTION PART NUMBERWWE2480 complete wide angle PTO shaft WWE24801560K64/22RWWE2480 wide angle PTO half shaft WWE24801474HALF
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Kemper / Kidd
21www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Kemper Silage WagonTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Cargo 8200L
Length: 180Width: 58Curl ID: 27
Thickness: 5
Pick up tine - FH2035333
Length: 440Width: 300
Thickness: 5Hole size: 18.5
Knife - 60810
Parts to suit Kidd Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 18Length: 140Width: 43
Thickness: 5
Flat blade(Box Qty 25) - 0590279
-
Hole Size: 18Length: 140Width: 43
Thickness: 5
LH blade(Box Qty 25) - 0591152
Grass Harvesting Krone
22www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Krone Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
AM 201 / 166 / 241
LH Shown
Hole Size: 19Length: 94Width: 40
Thickness: 3
LH Twisted blade(Box Qty 25) - 1474192
RH Twisted blade(Box Qty 25) - 1473021
Thread: M12Length: 30Width: 32Collar: 18
Blade holder137.726.6141.053.4909.602.1
1377266
- V Belt - SPB2840(3 per mower)
5000, AMT 283 / 323, AFL 243 / 283, AM 203 / 243/ 283 / 323, AFA 243 / 283 / 323, EASYCUT 27 / 28 / 32 / 270 / 280 / 320 / 360 / 400 / 2700 / 2800 / 3200 / 3210 / 4013 / 5310 / 6210
LH Shown
Hole Size: 19Length: 116Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 1398880
RH Twisted blade(Box Qty 25) - 1398890
W2300 PTO Shaft1010mm length
with 1 3/8”6 spline ends
- W300E1010
These models of Krone Grass Mowers use the W2300 series of PTO shafts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
AMT 4000 / 5000, AMT 283 / 323, AFL 243 / 283, AM 203 / 243 / 283 / 323, AFA 243 / 283 / 323
Hole Size: 19Length: 116Width: 48
Thickness: 4
Formed blade(Box Qty 25) - 1398000
AFL 242 / 243 / 283, AM 203 / 243 / 283 / 323, AFA 243 / 283 / 323
LH Shown
Hole Size: 19Length: 96Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25)
-1466900
RH Twisted blade(Box Qty 25) 1466910
Parts to suit Krone Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
KW 4.40 / 4.60 / 4.65 / 5.35 / 5.50 / 5.52 / 6.05 / 6.40 / 6.70 / 6.72 / 7.70 / 7.82 / 7.85 / 8.50 / 8.80 / 8.82 / 9.02 / 11.02 / 13.02 / 15.02, KWT 5.50 / 7.70 / 8.80 / 10.50
RH shown
Length: 388Width: 134Curl ID: 45
Thickness: 9.5
LH Rotationtine (White) 153.015.1 1530151
RH Rotationtine (Green) 153.014.1 1530141
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Krone
23www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Krone Grass SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
KS 6.21-20 DuoKS 6.51-20 DuoKS 6.21-6.81 DuoKS 6.81-7.61 Duo12.5 Swadro 421 to 1500
Length: 630Width: 99Curl ID: 45
Thickness: 10
LH Rotationouter tine(Yellow)
- 2650120
Length: 630Width: 99Curl ID: 45
Thickness: 10
RH Rotationouter tine(Yellow)
- 2650100
Length: 625Width: 99Curl ID: 45
Thickness: 10
LH Rotationinner tine(Yellow)
- 2650130
Length: 625Width: 99Curl ID: 45
Thickness: 10
RH Rotationinner tine(Yellow)
- 2650110
- Fixing plate153.014.1 / 015.1265.010.0 / 011.0265.012.0 / 013.0
001530210N
M12 x 9010.9 strength
M12 Bolt to suit fi xing plate - M1290931109
M12 M12 Lock nut to suit fi xing plate - M12DIN985
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Swadro 800 & 900
Length: 640Width: 70
Thickness: 9.5Tine - 2684050
- Fixing plate153.014.1 / 015.1265.010.0 / 011.0265.012.0 / 013.0
001530210N
M12 x 100 M12 Bolt to suit fi xing plate - M12100DIN931
M12 M12 Lock nut to suit fi xing plate - M12DIN985
M12 M12 Flat washer to suit fi xing plate - M12DIN125A
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Swadro 900Type: K33B
Hub: 1 3/8" 6 spl.Torque: 90 daNm
Wide angle radial pin clutch - 556630390
Grass Harvesting Krone
24www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Krone Harvester & WagonTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Titan 640GL,Titan 4/25LTitan 4/32L
Length: 145Width: 62Curl ID: 22
Thickness: 5
Pick up tine 93814809381481 9381480
Length: 500Width: 246
Thickness: 6Hole size: 10
Knife 332.970.0 3329700
Turbo 6/40
Length: 145Width: 62Curl ID: 22
Thickness: 5
Pick up tine 93814809381481 9381480
Length: 373Width: 185
Thickness: 5 Knife - 3472167
XL, XXL
Length: 423Width: 267
Thickness: 6Hole size: 10
Knife 334.899.0333.786.0 3348990
(35 per machine)
HSD, HSL, TS (Turbo) Micro Chop
Length: 145Width: 75Curl ID: 27
Thickness: 5.5
Pick up tine 9381580212300500 9381580
Length: 364Width: 120
Thickness: 3.5Hole size: 29.5
Knife 3451442 9379633
HSD, HSL, TS (Turbo)
Length: 145Width: 75Curl ID: 27
Thickness: 5.5
Pick up tine 9381580212300500 9381580
Length: 400Width: 120
Thickness: 3.5 Hole size: 30 & 6
Knife 233.917.60 23391760
TITAN 4/25L, TITAN 4/32L
Length: 145Width: 62Curl ID: 22
Thickness: 5
Pick up tine 93814809381481 9381480
Length: 380Width: 260
Thickness: 6 Hole size: 10
Knife 332.960.0 3329600
Grass Harvesting Krone
25www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Krone BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
KR130 / 150 / 160 / 180
Length: 145Width: 75Curl ID: 28
Thickness: 5Pick up tine
(Black)212300500 212200500
Length: 145Width: 75Curl ID: 27
Thickness: 5.5 Pick up tine
(Yellow)9381580 9381580
KR130B, KR160B (90-),BP (-445800)
Length: 160Width: 74Curl ID: 28
Thickness: 5.5
Pick up tine - 9380403
KR130 Chopper
Length: 155Width: 59Curl ID: 22
Thickness: 5
GalvanisedPick up tine - 9382750G
Painted (Yellow) Pick up tine 9382750 212827500
Length: 300Width: 168
Thickness: 5Knife - 2759951
290Length: 290Width: 200
Thickness: 5Knife 2777610 2793490
300Length: 300Width: 168
Thickness: 5Knife - 2759951
Roundpack 1250
Length: 145Width: 62Curl ID: 22
Thickness: 5
Pick up tine 93814809381481 9381480
Length: 155Width: 59Curl ID: 22
Thickness: 5
GalvanisedPick up tine - 9382750G
Painted (Yellow) Pick up tine 9382750 212827500
Length: 290Width: 200
Thickness: 5Knife 2777610 2793490
15 x 600 x 6 4 PLY Tyrec/w tube - 15X600X6X4
Width: 99Height: 93Depth: 50
4 Function lamp - 21093021
These models of Krone Grass Mowers use the W2480 series of PTO shafts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Roundpack 1250 MCComprima 125 XCComprima 155 XC
Length: 145Width: 62Curl ID: 22
Thickness: 5
Pick up tine 93814809381481 9381480
Length: 155Width: 59Curl ID: 22
Thickness: 5
GalvanisedPick up tine - 9382750G
Painted (Yellow) Pick up tine 9382750 212827500
Grass Harvesting Kuhn
26www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Kuhn Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
GMD 400, GMD 500GMD 600 / 700 / 800 GII
RH Shown
Hole Size: 18.25Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) 55903210 55903210
RH Blade(Box Qty 25) 55903310 55903310
Thread: M12Length: 33Width: 30Collar: 18
Originalblade holder - 56115800
Economyblade holder - 56115800E
-
V Belt GMD 400GMD 500 SPB2500
V BeltGMD 600GMD 700GMD 800
SPBX2900
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
FC 240P, FC 280P,FC 240F, FC 280FGMD 801GMD 602 / 702 / 802 FAlterna 400 / 500 / 500R
RH Shown
Hole Size: 18.25Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) 55903210 55903210
RH Blade(Box Qty 25) 55903310 55903310
Thread: M12Length: 33Width: 30Collar: 18
Originalblade holder - 56115800
Economyblade holder - 56115800E
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
FC 250, FC 250G,FC 250GT, FC 300FC 300G, FC 300GT
RH Shown
Hole Size: 18.25Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) 55903210 55903210
RH Blade(Box Qty 25) 55903310 55903310
Thread: M12Length: 33Width: 30Collar: 18
Originalblade holder - 56115800
Economyblade holder - 56115800E
- V Belt Early Models SPB1500(3 per mower)
- Raw edge cogged V-Belt Later Models SPBX1600
(4 per mower)These models of Kuhn Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Grass Harvesting Kuhn
27www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Kuhn Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
GMD 44 / 55 / 66 / 77 HD
LH Shown
Hole Size: 16.25Length: 93Width: 40
Thickness: 3
LH Twisted blade(Box Qty 25) - 56151200
RH Twisted blade(Box Qty 25) - 56151300
LH Shown
Hole Size: 16.25Length: 95Width: 45
Thickness: 3.5
LH Blade(Box Qty 25) - 56151210
RH Blade(Box Qty 25) - 56151310
LH Shown
Hole Size: 18.25Length: 123Width: 45
Thickness: 4
LH Twisted blade(Box Qty 25) 56451200
RH Twisted blade(Box Qty 25) 56451300
Thread: M10Length: 28Width: 30Collar: 16
Originalblade holder 56210100 56210100
Economyblade holder - 56210100E
- V Belt - SPB2500(4 per mower)
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Split Disc to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTAlterna 400 / 500 / 500RFC200 to 1988, FC202 from 1989
- 55913700
Disc to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTAlterna 400 / 500 / 500RFC200 to 1988, FC202 from 1989
- 55911100
Grass Harvesting Kuhn
28www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Stone Guard (Disc 1) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HDfrom Model No. 760501with square leading edge
5619060056205800 56205800
Stone Guard (Disc 1) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HDto M. No. 760500with tapered leading edge
- 56190500E
Disc to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56200700E
Disc (Outer) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56200800
Disc Nut to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 80201847
Outer Guard to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 300 up to 1998 - 55911300
Grass Harvesting Kuhn
28awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Shoe to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56192300
Grass Harvesting Kuhn
29www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Stone Guard to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTAlterna 400 / 500 / 500RFC200 to 1988, FC202 from 1989
- 55901200
Economy type - 55901200E
Stone Guard (Outside) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 300 - 55910400
Stone Guard Weld-On Wear Plate to suit Kuhn MowersDESCRIPTION OEM NUMBER PART NUMBERWeld-On Wear Plate to suit 55901200 - 05901200
Skid to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GT - 55911400
Skid (55903902) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTFC200 to 1988, FC202 from 1989 - 55903900
Bearing to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F - 56131500
Disc Bearing Housing to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F 99462792 56480410
Bearing to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTAlterna 400 / 500 / 500RFC200 to 1988, FC202 from 1989
- 81103573
Rib Plate to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBERFC 202 (from 1989) - 55911500
Grass Harvesting Kuhn
30www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Dust Seal to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBERGMD 44 / 55 / 66 - 56206200
Bed Sump Plug to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBERGMD 44 / 55 / 66 / 77 - 56207000
Plastic Cover to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBERGMD 44 / 55 / 66 / 77 - 83040052
Gasket to suit Kuhn Mowers TO SUIT MODELS OEM NUMBER PART NUMBERGMD 44 / 55 / 66 - 56144900
Knife Bed Gear (Old) to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 to Model No. 790000GMD66 to Model No. 760884
- 56142810
Knife Bed Gear to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56202410
Knife Bed Gear to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56202510
Knife Bed Gear to suit Kuhn MowersTO FIT MODELS OEM NUMBER PART NUMBERFC250 / 250G / 250GT / 300 / 300G / 300GTAlterna 400 / 500 / 500RFC200 to 1988, FC202 from 1989
-55900110
Grass Harvesting Kuhn
31www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Nylon Bush (56223600) to suit Kuhn MowersApplication: 3 Point lifting frame
TO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56123500
Bush to suit Kuhn MowersApplication: Disc drive
TO SUIT MODELS OEM NUMBER PART NUMBERGMD44 / 55 / 66 / 77 / HD - 56145900
Elastic Coupling to suit Kuhn MowersApplication: Main drive
TO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 300 - 83030002
Lock Nut to suit Kuhn Bed BoltSIZE DESCRIPTION PART NUMBERM10 Lock Nut to suit Kuhn bed bolt 80201051
Bed Bolts to suit KuhnSIZE DESCRIPTION PART NUMBER
M10 x 16 Bed bolt to suit Kuhn 80131016M10 x 25 Bed bolt to suit Kuhn 80131025M10 x 30 Bed bolt to suit Kuhn 80131030M10 x 35 Bed bolt to suit Kuhn 80131035M10 x 45 Bed bolt to suit Kuhn 80131045
Knife Bed Gasket to suit Kuhn MowersTO SUIT MODELS OEM NUMBER PART NUMBERFC250 / 300 - 55900800
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Kuhn
32www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Kuhn Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
GF5001TH, GF5801MH GF5801MHO, GF6401TGF6401MHO, GF6401MHGF7501MH, GF7601MHGF7601MHO, GF8501MHGF8501T, GF8501TOGF10601TO
LH Shown
Length: 387Width: 110Curl ID: 51
Thickness: 9.5
LH Rotationtine - 58740600
RH Rotationtine - 58740700
M14 x 50 M14 Bolt forfi tting tine - M1450DIN931
M14 M14 Lock nutfor fi tting tine - M14DIN985
15 x 600 x 6 4 PLY Tyrec/w tube - 15X600X6X4
GRS24, GF3701, GF4000GF4201, GF5000, GF5001, GF6000, GF6001, GF6301,GF7000, GF7001
Length: 386Width: 111Curl ID: 51
Thickness: 9.5
Tine - 57609000
M14 x 50 M14 Boltfor fi tting tine - M1450DIN931
M14 M14 Lock nutfor fi tting tine - M14DIN985
15 x 600 x 6 4 PLY Tyrec/w tube - 15X600X6X4
GA300GT, GA3200GT,GA3501S,GA381GM-GT,GA4101GM-GT, GA682, GA732, GA7301, GA7302GL
Length: 500Width: 92Curl ID: 51
Thickness: 9.5
Tine 57720200
M12 x 75 M12 Boltfor fi tting tine M1275DIN931
M12 M12 HD Washer for fi tting tine M12DIN7349
15 x 600 x 6 4 PLY Tyrec/w tube - 15X600X6X4
GA200, GA230, GA250, GA300
Length: 490Width: 99Curl ID: 44
Thickness: 8.5
Tine 57502000
Fixing set 57502100KN
400 x 8 4 PLY Tyrec/w tube 400X8X4T510
GIRO GRS 20 / 21GF 5000H
Length: 405Width: 111Curl ID: 46
Thickness: 9.4
Tine 57601100
15 x 600 x 6 4 PLY Tyrec/w tube - 15X600X6X4
Grass Harvesting Deutz-Fahr - Kverneland
33www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Deutz-Fahr - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 19Length: 90Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 90
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Cranked blade(Box Qty 25) - 96C
-
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
KM20, KM22
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Hole Size: 10Hole Distance: 55
Length: 140Width: 84
Blade holderPre 1970
VF0658.001706580017
Hole Size: 10Hole Distance: 47
Length: 225Width: 85
Blade holderLater KM20
VF0658.010906580109
Hole Size: 19Hole Distance: 55
Length: 205Width: 95
Blade holderLater KM22
VF0656.351406563514
M12 x 25 Countersunkscrew - M1225DIN7991
- V-Belt KM20 toserial no. 5100
SPA2782(3 per mower)
- V-Belt KM20 fromserial no. 5101
SPA2832(3 per mower)
- V-Belt KM22 to serial no. 21569
SPA2882(4 per mower)
- V-Belt KM22 from serial no. 21570
SPA2932(4 per mower)
Grass Harvesting Deutz-Fahr - Kverneland
34www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Deutz-Fahr - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
KM2.17, KM2.19, KM2.23, KM2.33
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Hole Size: 12Hole Distance: 55
Length: 214Width: 95
Blade holder VF1650.0771 16500771
Thread Size: M12Thread Length: 25
Bolt to suitblade holder - M1225DIN7991
KM2027 (Drum)SM 40 / 45 / 50 / 50F / 55F (Disc)
LH Shown
Hole Size: 19Length: 96Width: 40
Thickness: 3
LH Blade 16502727 06561547
RH Blade 16502726 06561546
Hole Size: 12.5Hole Distance: 55
Length: 150Width: 90
Blade holder Drum mower 16501922
Thread: M10Length: 12Width: 30Collar: 18
Blade holder SM Disc mower 06561225
KM3.33, KM4.33, KM5.26, KM5.29, KM5.30, KM5.30FZ, KM5.90,SM2.17, SM4.24, SM5.26F, SM5.30FHPC, SM5.30TC, SM5.32
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
KMA4.30, KM4.30, KM4.30FS,KM4.30FS-HPC,SM4.21, SM5.28 LH Shown
Hole Size: 18.5Length: 107Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 90261559
RH Twisted blade(Box Qty 25) - 90261560
KM3.18, KM3.19S, KM3.23FS, KM3.23S, KM3.23STC, KM3.27, KM3.27FS, KM3.29, KM3.29FS, KM3.90, KM4.27, KM4.29, KM4.90
LH Shown
Hole Size: 19Length: 93Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - TF71
RH Twisted blade(Box Qty 25) - TF70
Grass Harvesting Deutz-Fahr - Kverneland
35www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Drum to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR - 06563516
Drum to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT061E
Saucer to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT062E
Saucer to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM22 / 22CR from Model No. 18070 - 06567882
Saucer to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM25 - 06580818
Hub to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT60E
Screw to suit Deutz-Fahr - KvernelandApplication: Saucer
TO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT71
Grass Harvesting Deutz-Fahr - Kverneland
36www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Support Plate to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR - 06228357
Drum Cover to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR - 06563480
Drum Cover to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM25 - 06580801
Cap to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT246
Cap to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22, KM24 - 06228352
Shaft to suit Deutz-Fahr - Kverneland (30mm)Application: Main drive
TO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT98
Shaft to suit Deutz-Fahr - KvernelandApplication: Drum drive
TO SUIT MODELS OEM NUMBER PART NUMBERKM3.16 - GT256E
Shaft to suit Deutz-Fahr - KvernelandApplication: Drum drive
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR - 06580765
Shaft to suit Deutz-Fahr - KvernelandApplication: Input Shaft
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 - 06568455
Grass Harvesting Deutz-Fahr - Kverneland
37www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bush to suit Deutz-Fahr - KvernelandApplication: Cutting disc
TO SUIT MODELS OEM NUMBER PART NUMBERKM22 / 22CR, KM24 / 24CR, KM25 - 06228349
Bush to suit Deutz-Fahr - KvernelandApplication: Main drive
TO SUIT MODELS OEM NUMBER PART NUMBERSM45 / 45CR, KM2.17, KM2.19 / 2.19S, KM22 / 22CR, KM24 / 24CR - 06567746
Bush to suit Deutz-Fahr - KvernelandApplication: 3 Point lifting frame
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR - 06228389
Inner Ring to suit Deutz-Fahr - KvernelandSize: 25 x 30 x 26.5
TO SUIT MODELS OEM NUMBER PART NUMBER- - 06215125
Torsion Spring to suit Deutz-Fahr - KvernelandTO SUIT MODELS SIDE OEM NUMBER PART NUMBERKU25 Left hand VF 0621.5644 06215644KU25 Right hand VF 0621.5645 06215645
Bolt to suit Deutz-Fahr - KvernelandApplication: Cutting disc
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR - M1225DIN7991
Gear to suit Deutz-Fahr - KvernelandApplication: Main shaft & Drum drive
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 to 1970, KM22 / 22CR - 06228344
Distance Ring to suit Deutz-Fahr - KvernelandApplication: Drum shaft
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 - 06228340
Grass Harvesting Deutz-Fahr - Kverneland
38www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Ring to suit Deutz-Fahr - KvernelandApplication: Main pivot
TO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR, SM45 / 45CR, KM25 - 06228342
Bracket to suit Deutz-Fahr - KvernelandApplication: 3 Point lifting frame
TO SUIT MODELS OEM NUMBER PART NUMBERSM45 / 45CR, KM2.17, KM2.19 / 2.19S, KM22 / 22CR, KM24 / 24CR - 06563635
Bush to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 / 22CR, KM24 / 24CR, SM45 / 45CR, KM25 - 06567029
Bush to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM20, KM22 - 06228402
Circlip to suit Deutz-Fahr - KvernelandTO SUIT MODELS OEM NUMBER PART NUMBERKM24 / 24CR - 01133010
Grass Harvesting Deutz-Fahr - Kverneland
39www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Deutz-Fahr - Kverneland Grass Tedder & SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Apollo
LH Shown
Length: 390Width: 105Curl ID: 41
Thickness: 8.9
LH Tine VF1650.2741VF0658.0647 106403012900
RH Tine VF1650.2742VF0658.0648 106403013000
CentipedeLH Shown
Length: 370Width: 105Curl ID: 35
Thickness: 9
LH Tine VF0622.9776 104000150010
RH Tine VF0622.9777 104000150110
KH 3.55, 3.64, 3.76
Length: 375Width: 104Curl ID: 51
Thickness: 10
Tedder tine - 16502744
KS 1.50, 1.70, 237, 2.42(DN), 2.60
Length: 630Width: 93Curl ID: 40
Thickness: 9
Swather tine - 16504331
5321, 6821, 7621
Length: 375Width: 110Curl ID: 60
Thickness: 10
Tine - 1660756486
Parts to suit Deutz-Fahr - Kverneland Grass BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
MP130
Length: 168Width: 64
Curl ID: 27.5Thickness: 5.5
Pick up tine - 16618933
-
Length: 170Width: 62Curl ID: 28
Thickness: 5.5
Pick up tine - 06296285
-
Length: 390Width: 200
Thickness: 5Hole size: 22
Knife - 16613168
-
Length: 385Width: 180
Thickness: 5Hole size: 22
Knife - 16518393
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting PZ - Kverneland
40www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit PZ - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
CM135CM165
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
Hole Size: 12Hole Distance: 80
Length: 575Width: 126
Blade holderto suit CM135 - PZ87
Hole Size: 18Hole Distance: 75
Length: 275Width: 125
Blade holderto suit CM165 - PZ116
- V-Beltto suit CM135 - SPA2482
(4 per mower)
- V-Belt o suit CM165 - SPA2847
(4 per mower)
- V-Beltto suit CM165 - SPB2840
(3 per mower)
CM260CM260HCM300H
LH Shown
Hole Size: 18.5Length: 107Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 90261559
RH Twisted blade(Box Qty 25) - 90261560
- V-Belt - SPB3150(5 per mower)
- V-Belt - SPB3350(5 per mower)
-
Hole Size: 19Length: 90Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 90
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Cranked blade(Box Qty 25) - 96C
-
Hole Size: 21Length: 105Width: 47
Thickness: 3
Flat blade(Box Qty 25) - CM15
-
LH Shown
Hole Size: 16.25Length: 98Width: 42
Thickness: 4
LH Twisted blade(Box Qty 25) - DM303
RH Twisted blade(Box Qty 25) DM304
CM185, CM186, CM185HCM230, CM230F CM265A, CM270A CM265F, CM270F CM268, CM298 LH Shown
Hole Size: 19Length: 93Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - TF71
RH Twisted blade(Box Qty 25) - TF70
-
LH Shown
Hole Size: 21Length: 105Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - CM137
RH Twisted blade(Box Qty 25) - CM138
Grass Harvesting PZ - Kverneland
40awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit PZ - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
CM185, CM190
LH Shown
Hole Size: 19Length: 93Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - TF71
RH Twisted blade(Box Qty 25) - TF70
Hole Size: 14Hole Distance: 75
Length: 180Width: 125
Blade holderto suit CM185,
CM190- PZ0250
CM210
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
Hole Size: 14Hole Distance: 75
Length: 210Width: 125
Blade holderto suit CM210 - PZ0243
Grass Harvesting PZ - Kverneland
41www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hub to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT60E
Saucer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT062E
Saucer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM135 - CM060E
Screw to suit PZ - Kverneland MowersApplication: Saucer
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT71
Cap to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBERS PART NUMBERCM135 / 165 / 166 / 170 / 215 / 215F - GT246
Drum to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT061EPARTS TO SUIT OEM NUMBER PART NUMBER
Drum bladeto suit GT061E - MT71
Blade Fitting Tool to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - CM059
Grass Harvesting PZ - Kverneland
42www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Collar to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - GT65
Shaft to suit PZ - Kverneland MowersApplication: Drum drive
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT256EPARTS TO SUIT OEM NUMBER PART NUMBER
Circlipto suit GT256E - ND8072V
Bolt to suit PZ - Kverneland MowersApplication: Blade holder fi xing
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 - GT57CM186 / 186 / 189 / 190 / 210 / 211 / 212 / 230 - ET177
GT57 ET177
Gear to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - GT64
Gear to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - TC94
Gear to suit PZ - Kverneland MowersTO SUIT MODELS TEETH OEM NUMBER PART NUMBERCM185 / 186 14 - ST44
Gear to suit PZ - Kverneland MowersTO SUIT MODELS TEETH OEM NUMBER PART NUMBERCM185 / 186 29 - ST45PZ
Grass Harvesting PZ - Kverneland
43www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Tab Washer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - CH114
Tab Washer to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERTK190 - MT34
Tab Washer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM135 / 165 / 166 / 168 - MT301
Nut to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM190 - MT174
Nut to suit PZ - Kverneland Mowers TO SUIT MODELS THREAD OEM NUMBER PART NUMBERCM135 Left hand - MT179LHCM135 Right hand - MT179RH
Nut to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM168 - CH180
Spacing Tube to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - CH17
Shaft to suit PZ - Kverneland (30mm)Application: New type mower
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 170 - GT98
Shaft to suit PZ - Kverneland (25mm)Application: Old type mower
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - GT17E
Spacer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT84
Grass Harvesting PZ - Kverneland
44www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bolt to suit PZ - Kverneland Mowers DESCRIPTION OEM NUMBER PART NUMBERM10 x 20 Flanged bolt - 30268120
Nut to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERM10 Flanged nut - 30583100
Allen Screw to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM135 - MT36
Allen Screw to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - GT72
Circlip to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM4 / 135 / 210 - PZ58CM185 / 186 / 189 - PZ72
Shim Sets to suit PZ - Kverneland Mowers TO SUIT MODELS APPLICATION OEM NUMBER PART NUMBERCM190 Main drive - TH0079CM190 Drum drive - TH0078
Shim Sets to suit PZ - Kverneland Mowers / HaybobsID OD SHIMS IN SET OEM NUMBER PART NUMBER
25.2 33 8 - MT006230 37 8 - MT0031050 61.8 8 - MT006360 72 5 - TH00145
Ring to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER- - 31425007
Bearing (NU207C4) to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERCM144 VN40130207 40130207
Grass Harvesting PZ - Kverneland
45www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Spacer to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM4 / 215 - MT357
Nylon Bush to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - RT120
Dust Shield to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 - MT365
Bush to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERTK210A / 210D - TH9
Plastic Cone to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM135 / 211 / 212 / 215 - MT374
Headstock Spring to suit PZ - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 166 / 185 / 186 / 189 / 211 / 212 / 215 - PZ51
Bush to suit PZ - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBERCM165 - 17870664
Gasket (Rubber Joint) to suit PZ - Kverneland MowersWidth: 20mmDepth: 3mmSold per metre
TO SUIT MODELS OEM NUMBER PART NUMBERCM135 / 165 / 166 / 185 / 186 / 189 / 211 / 212 / 215 / 230 - ND9905
Grass Harvesting PZ - Kverneland
46www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit PZ - Kverneland HaybobsTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Andex 301, 341, 381
Length: 293Width: 64Curl ID: 35
Thickness: 6
Spring tine VG PZ9 PZ9
- Fixing set - HK60
Haybob, Haybob 300
Short length: 605Long length: 840
Width: 57Curl ID: 43
Thickness: 7
Swather tine VG PZ114 PZ114
Haybob
LH Shown
Length: 375Width: 113Curl ID: 42
Thickness: 9
RH Haybobnarrow rotary tine PZ106 PZ106
LH Haybobnarrow rotary tine PZ107 PZ107
LH Shown
Length: 375Width: 113Curl ID: 42
Thickness: 9
RH Haybob wide rotary tine PZ111 PZ111
LH Haybob wide rotary tine PZ110 PZ110
LH Shown
Length: 54Curl ID: 17.5
Thickness: 2.5
LH Haybob spring - PZ99
RH Haybob spring - PZ100
- Fixing set - TH200
Parts to suit PZ - Kverneland Grass Tedder & SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Fanex 400LH Shown
Length: 405Width: 111Curl ID: 42
Thickness: 9
LH Tine - PZ340
RH Tine - PZ339
- Tine clamp - GZ280
Spring to suit PZ - Kverneland Haybob TO SUIT MODELS OEM NUMBER PART NUMBERHS360 - PZ171
Grass Harvesting PZ - Kverneland
47www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Cap for Bracket to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela - TH107
Bush to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERStrela Haybob, Strela Haybob 300,Super Strela DS5000
- TH93
Stop Ring to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERStrela Haybob, Strela Haybob 300, HS360,Super Strela DS 5000
- TH42
Tine Holders to suit PZ - Kverneland HaybobsTO SUIT MODELS SIDE PART NUMBERStrela Haybob, Strela Haybob 300 Left hand TH0109Strela Haybob, Strela Haybob 300 Right hand TH0108TH0108 Shown
Bevel Gear c/w Bearing to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERJumbo 420, Strela Haybob,Strela Haybob 300, HS360, - TH00137
Bevel Pinion to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERJumbo 420, Strela Haybob,Strela Haybob 300, HS360, - TH2
Pin to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela - TH062
1 1/2" LH Adjuster to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela - TH141
Bush to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela - TH33
Grass Harvesting PZ - Kverneland
48www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Tailgate Support Bar to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERJumbo 420, Strela Haybob, Strela Haybob 300, HS 360, Super Strela DS 5000 - PZ115
Defl ectors to suit PZ - Kverneland HaybobsSupplied fully assembled
TO SUIT MODELS SIDE PART NUMBERStrela Haybob Left hand TH00117LHStrela Haybob Right hand TH00118RHPARTS TO SUIT OEM NUMBER PART NUMBERReplacement tine to suit VG PZ114 PZ114
Defl ectors to suit PZ - Kverneland HaybobsSupplied fully assembled
TO SUIT MODELS SIDE PART NUMBERStrela Haybob 300 Left hand TH00209Strela Haybob 300 Right hand TH00208PARTS TO SUIT OEM NUMBER PART NUMBERReplacement tine to suit VG PZ114 PZ114
Nylon Block to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERJumbo 420, Strela 300 Haybob - JH66
Defl ector to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERStrela Haybob, Strela Haybob 300 - TH125
Defl ector Compression Spring to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela 300 Haybob - PZ300
Swath Defl ector Circlip to suit PZ - Kverneland Haybobs TO SUIT MODELS PART NUMBERStrela 300 Haybob PZ301
Tine Strip to suit PZ - Kverneland HaybobsTO SUIT MODELS SIDE PART NUMBER
Strela Haybob, Strela Haybob 300Left hand TH115
Right hand TH116
Left Hand Shown
Tine to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERStrela Haybob, Strela Haybob 300 VG PZ114 PZ114
Grass Harvesting PZ - Kverneland
49www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Nylon Plug to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERStrela - TH94
Spring to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERHaybob - PZ108
Ring to suit PZ - Kverneland HaybobsTO SUIT MODELS OEM NUMBER PART NUMBERHaybob - GT103
Right Hand Nut to suit PZ - Kverneland Haybobs TO SUIT MODELS OEM NUMBER PART NUMBERFlevo 480 - GT37
Swather Spring to suit PZ - Kverneland HaybobTO SUIT MODELS OEM NUMBER PART NUMBERHaybob - PZ281V
Circlip to suit PZ - Kverneland HaybobTO SUIT MODELS OEM NUMBER PART NUMBERHaybob - PZ48HS360 VG PZ117V PZ117
Grease to suit PZ - Kverneland Grass EquipmentDESCRIPTION OEM NUMBER PART NUMBER5 Kg bucket of grease - ND9091
Grass Harvesting PZ - Kverneland
50www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Genuine Walterscheid PTO Shafts to suit PZ - Kverneland Grass EquipmentNo. SERIES ENDS TO SUIT MODELS APPLICATION PART NUMBER
1 W2300 1 3/8" 6 spline Yoke /1 3/8" 6 spline F5 freewheel CM135, CM165 etc Drum mower PTO shaft W300E610F5
2 W22001 3/8" 6 spline Yoke /
1 3/8" 6 spline K33 clutch(clutch rating 600 dnm)
Haybob - W221110K33
- Haybob guard to suit PZ - Kverneland SD151000WA- Haybob guard cone to suit PZ - Kverneland 8515101
1
2
Tyres to suit PZ - Kverneland Hay Equipment Supplied complete with tube
DIMENSIONS PROFILE PLY PART NUMBER350 x 8 R3B 4 350X8X4
15 x 600 x 6 Line 4 15X600X6X4
Wheel Rim to suit PZ - Kverneland HaybobTO SUIT MODELS OEM NUMBER PART NUMBERHaybob, HS360 - ND9827PARTS TO SUIT OEM NUMBER PART NUMBER
Wheel cap to suit ND9827 rim - ND9620
Spacing tube to suit ND9827 rim - TH66
Wheel Rim to suit PZ - Kverneland Hay EquipmentSupplied c/w bearings
TO SUIT MODELS OEM NUMBER PART NUMBERJumbo 420, Strela Haybob,Super Strela DS5000 - TH00114
PARTS TO SUIT OEM NUMBER PART NUMBER
Wheel cap to suit TH00114 rim - HK0105A
Grass Harvesting Taarup - Kverneland
51www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Taarup - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
1116, 1210
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
1118, 1185C, 1230, 1265F, 1295
LH Shown
Hole Size: 19Length: 93Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - TF71
RH Twisted blade(Box Qty 25) - TF70
204, 225, 226, 227, 235, 236, 237, 238, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F, 325, 336R, 337R, 338B, 338C, 338R, 345, 346, 347, 348, 2016, 2020, 2024, 2028, 2124, 2128, 2132, 2420, 2424, 2428, 2432, 2524, 2528, 2532, 3024, 3028, 3124, 3128, 3132, 3532F, 4024R, 4028C, 4032C, 4032R, 4032CR, 4036C, 4036R, 4036CR, 4040C, 4062C, 4228LT, 4228LTD, 4232CT, 4232LR, 4232LRE, 4236LT, 4236LTB, 4236LR, 5090
RH Shown
Hole: 20.8 x 23Length: 126Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 56110900
RH Twisted blade(Box Qty 25) - 56110400
TA 204, 205, 206, 224, 225, 226, 227 , 235, 236, 237, 238, 316, 317F, 325, 327F, 328F, 336, 336R, 337, 337C, 338, 338B, 338C, 338R, 339, 339C, 339CR, 339R, 345, 346, 347, 348, 2016, 2020, 2024, 2028, 2124, 2128, 2132, 2420, 2424, 2428, 2432, 2524, 2528, 253, 4032C, 4032R, 4032CR
Hole: 20.5 x 23Length: 127Width: 47
Thickness: 4
Reversible blade - 56110500
204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F, 336R, 337R, 338B, 338C, 338R, 345, 346
Hole: 20.8 x 23Length: 127Width: 50
Thickness: 4
Formed Blade(Box Qty 25) - 56110300
1650
Hole: 20.8 x 23Length: 163Width: 60
Thickness: 3
Formed blade - 56110200
All above models
Thread: M12Length: 35Width: 30Collar: 20
Blade holder KT56.40.3000 5640300
These models of Taarup Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Grass Harvesting Taarup - Kverneland
52www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Stoneguard to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER336, 337, 338 - 55656000
Stoneguard to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 315, 316B, 316F, 317F, 336, 337, 338 - 56130400
Pinion Gear to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F 99462706 56202510
Disc to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B,315, 316B, 316F, 317F - 56104500
Skid (3") to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER306, 306B, 307, 307B - 39677000
Skid to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER306, 306B, 307, 307B - 39678000
Bolt & Nut to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER306, 307 - 45429000
Belts to suit Taarup - Kverneland Mowers TO SUIT MODELS QTY PER MOWER OEM NUMBER PART NUMBER2428 4 - SPB30704232 3 - SPB18004336CR - - SPB1900
Grass Harvesting Taarup - Kverneland
53www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bush to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F 99462624 56145900
Bearing to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F 99462643 56131500
Disc Bearing Housing to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 304, 305, 306, 306B, 307, 307B, 315, 316B, 316F, 317F 99462792 56480410
Fingers to suit Taarup - Kverneland MowersTO SUIT MODELS SIDE PART NUMBER304, 305, 306, 306B, 307, 307B, 336, 337, 338, 338B
Left Hand 39113000Right Hand 39113900
Left Hand Shown
Bolt & Nut to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER336, 337, 338, 338B - 68405100
Shock Absorber to suit Taarup - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBER304, 305, 306, 306B, 307, 307B, 336, 337, 338, 338B
- 39111000
Plate to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER304, 305, 306, 306B, 307, 307B, - 39112000336, 337, 338, 338B - 68268000
Plate to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER304, 305, 306, 306B, 307, 307B, 336, 337, 338, 338B - 39115000
www.mchc.ie
Grass Harvesting Taarup - Kverneland
54C O M P O N E NO M P O N E N T SC O M P O N E N T S
Genuine Walterscheid PTO parts to suit Taarup - Kverneland Grass MowersTYPE DESCRIPTION OEM NUMBER PART NUMBER
W2400 Cross (32x76)with 1 Cap grease nipple - 3500141
Parts to suit Taarup - Kverneland Grass Tedder & SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
8055, 8068, 8076
Length: 375Width: 110Curl ID: 60
Thickness: 10
Tine - 1660756486
Plug to suit Taarup - Kverneland Mowers TO SUIT MODELS OEM NUMBER PART NUMBER204, 205, 206, 336, 337, 338 - 99462633
Parts to suit Taarup - Kverneland Grass HarvesterTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
105B / 106B / 108 / 404 / 405 / 406 / 480 / 602B / 605 / 605B / 622 & Ten X
Length: 152Width: 69Curl ID: 26
Thickness: 5
Pick up tine 59406000 59406000
- Spring washer - 59427000
1030, KV465
Length: 210Width: 70Curl ID: 28
Thickness: 6
Pick up tine KT 63.153.000 6315300094
Linak-Motor to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBER105B, 106B, 108, 480, 602B, 605, 605B, 622, DM1100, DM1350, DM1500, TEN-X - 99472320
Linak-Motor Complete to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBER480, 602B, 605, 605B, 622,DC1500, DM1100, DM1350, DM1500 - 47652000
Ram Assembly to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBER480, 602B, 605, 605B, 622, DC1500, DM1100, DM1350, DM1500 - 99472304
www.mchc.ie
Grass Harvesting Taarup - Kverneland
55C O M P O N E NO M P O N E N T SC O M P O N E N T S
Switch to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBER108, 602B, 605B, DC1500, DM1100, DM1350, DM1500, Silage Wagon - Type 1030 - 99473392
Upper Counter Knife to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDC1500 - 45244100
Flail to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDM1100, DM1350, DM1500, S1100, S1350, S1500, SK1200 - 40882300
PARTS TO SUIT OEM NUMBER PART NUMBER
Bush to suit40882300 fl ail - 40881100
Spring to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDM1100, DM1350, DM1500, S1100, S1350, S1500, SK1200 - 42166000
Bushing to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBER105B, 106B, 108, 404, 405, 406, 480, 602B, 605, 605B, 622, TEN-X - 59422000
Flail Bar (1467mm) to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDM1500, S1500 - 49103100
Grass Harvesting Taarup - Kverneland
56www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Carrying Fork to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDC1500 - 45288000
Block to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERAuger DC1500 - 40684000
Bolt to suit Taarup - Kverneland HarvesterApplication: Knife drum
TO SUIT MODELS OEM NUMBER PART NUMBERDC1500 - 45384000
Bolt to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERDM1500 - 45430000
Guard to suit Taarup - Kverneland HarvesterApplication: Gearbox
TO SUIT MODELS OEM NUMBER PART NUMBERDM1500 - 47589000
Bearing to suit Taarup - Kverneland HarvesterTO SUIT MODELS OEM NUMBER PART NUMBERAuger DM1500 (GYE35KRRB) - 99137314
Chute Control Cableto suit Taarup - Kverneland HarvesterLength: 3514mm
TO SUIT MODELS OEM NUMBER PART NUMBERDM1500 - 99452757
Grass Harvesting Vicon - Kverneland
57www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Vicon - Kverneland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
CM338, CM339, CMP2601, CMP2901, CMP3001F, CMP3001A, CMP9001, CM165, CM240, CM2400, DMP2401TC, DMP3001TC, DMP2400, DMP3200, DM2201F, DM2401F, DM2601F, DM3001F, FMT3000, OM241
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
Thread: M10Length: 32Width: 30Collar: 18
Blade holder - 81160K
Thread: M12Length: 36Width: 31Collar: 18
Blade holder - B1374593
CM260, CM260H, CM300A, CM300F, CM-300FH-HPC, CM300H, CM144, CM216, CM2200, DMP2800, FMV2400, FMV2800, AMS2400, AMS2800, AM2400 HPC, OM216
LH Shown
Hole Size: 18.5Length: 107Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 90261559
RH Twisted blade(Box Qty 25) - 90261560
CM185, CM185H, CM186, CM188, CM189, CM190, CM230, CM230F, CM265A, CM265F, CM268, CM269, CM270A, CM270F, CM295F, CM296F, CM298, CM299, CM908, CM909
LH Shown
Hole Size: 19Length: 93Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - TF71
RH Twisted blade(Box Qty 25) - TF70
EXTRA 828Trailed Mower
LH Shown
Hole: 23 x 20.5Length: 105Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) KT5514100001 5514100001
RH Twisted blade(Box Qty 25) KT5514200001 5514200001
832 SeriesTrailed Mowers
RH Shown
Hole: 20.8 x 23Length: 126Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 56110900
RH Twisted blade(Box Qty 25) - 56110400
Grass Harvesting Vicon - Kverneland
57awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Top Hat Section to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM 165 / 240 - 14941
Top Hat (VNB2358394) to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM 165 / 167 / 217 / 240 / 247CM 1700 / 2200 / 2400 - B2372094
Mower Disc to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM 165 / 167 / 217 / 240 / 247 - B1019894
Grass Harvesting Vicon - Kverneland
58www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Slide to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM 165 / 240 / 241, OM 241 - 14935
Mower Slide to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 240 - 66591
Stone Guard to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 240 - 15923
Disc Mower Gear to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 / 240 / 241 - 95860
Bed Bolts to suit Vicon - Kverneland MowersTO SUIT MODELS SIZE OEM NUMBER PART NUMBER
CM165M10 x 20 - 81616M10 x 25 - 81617M10 x 30 - 81618
Gearbox Bottom O' Ring to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - 81822
Ring to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBER- - 70490
Belt to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - B93
Grass Harvesting Vicon - Kverneland
59www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
F5 Overrunning Clutch to suit Vicon - Kverneland MowersSize: W2400Connection: 1 3/8" - 6 Spline, quick release lockType: F5/1 R
TO SUIT MODELS OEM NUMBER PART NUMBER- 1171535 5614440
Spacer to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - 70359
Spacer to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM165 - 70360
Breather Plug to suit Vicon - Kverneland MowersApplication: Gearbox
TO SUIT MODELS OEM NUMBER PART NUMBERCM165 - 81425
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Vicon - Kverneland
60www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Saucer to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT062E
Hub to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT60E
Screw to suit Vicon - Kverneland MowersApplication: Saucer
TO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT71
Drum to suit Vicon - Kverneland MowersTO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT061EPARTS TO SUIT OEM NUMBER PART NUMBER
Drum bladeto suit GT061E - MT71
Shaft to suit Vicon - Kverneland MowersApplication: Drum drive
TO SUIT MODELS OEM NUMBER PART NUMBERCM168 - GT256EPARTS TO SUIT OEM NUMBER PART NUMBER
Circlipto suit GT256E - ND8072V
Grass Harvesting Vicon - Kverneland
61www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Vicon - Kverneland Grass Tedder & SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
533 Tedder
Length: 375Width: 110Curl ID: 60
Thickness: 10
Tine - 1660756486
Acrobat-HKXSprinter
Short length: 300Long length: 450Thickness: 6.5
Swather tine VN90092611 2611
- Hub plate - 92671
- Bracket - 92672
- Bearing - 91649
Fanex 532, 562, 772
Length: 375Width: 104Curl ID: 51
Thickness: 10
Tine - 16502744
- 16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Parts to suit Vicon - Kverneland Grass BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Length: 168Width: 64.5Curl ID: 27.5
Thickness: 5.5
Pick up tine - 16618933
-
Length: 170Width: 62Curl ID: 28
Thickness: 5.5
Pick up tine - 06296285
CH300 -
LH Tensionspring VN90036182 90036182
RH Tensionspring VN90036183 90036183
-
Length: 390Width: 200
Thickness: 5Hole size: 22
Knife - 16613168
Grass Harvesting Lely
62www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Lely Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Splendimo 320F / 320FC / 320L / 320M / 320MC / 320PC / 320TSplendimo 360M & 360TSplendimo 900MCClassico 280 & 320
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
- Blade holder - 4120101420
Thread: M10Length: 32Width: 28
Nips width: 16
Blade holder bolt - 4120101410
Splendimo281PC & 321PC
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
- Blade holder - 4120101420
Thread: M10Length: 32Width: 28
Nips width: 16
Blade holder bolt - 4120101410
- V-Belt - SPB1950
Optimo C
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
- Blade holder - 4120101420
Thread: M10Length: 32Width: 28
Nips width: 16
Blade holder bolt - 4120101410
- V-Belt - SPB2650
Optimo EM
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
- Blade holder - 4120101420
Thread: M10Length: 32Width: 28
Nips width: 16
Blade holder bolt - 4120101410
- V-Belt - SPB2360
Grass Harvesting Lely
63www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Saucer to suit Lely Grass MowersTO SUIT MODELS OEM NUMBER PART NUMBERSplendimo SZ, Optimo EM (H/2) - 4120114690
Plate to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERSplendimo SZ, Optimo EM (H/2) - 4120114680
Square Shaft to suit LelyTO SUIT MODELS LENGTH OEM NUMBER PART NUMBEROptimo EM (H/2) 2317mm - 4120301490
Conditioner Belt to suit Lely Grass MowersTO SUIT MODELS OEM NUMBER PART NUMBERLely Conditioner - SPB1550
Finger to suit Lely TO SUIT MODELS OEM NUMBER PART NUMBEROptimo C with Conditioner Rotor & Flat FingersSplendimo SF(C) with Conditioner Rotor & Flat Fingers, Splendimo T(C) with Conditioner
- 4120702280
Stone Guard to suit Lely Grass MowersNo. TO SUIT MODELS OEM NUMBER PART NUMBER2 Optimo EM (H/2) - 41201041003 Optimo EM (H/2) - 4120104200
Skid (6mm) to suit Lely Grass MowersNo. TO SUIT MODELS OEM NUMBER PART NUMBER1 Optimo EM (H/2) - 4120120070
1 2 3
Gear to suit Lely Grass MowersTO SUIT MODELS OEM NUMBER PART NUMBEROptimo - 4120103170
Grass Harvesting Lely
64www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Lely Grass Tedder & SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Cock Pheasant
Length: 283Width: 77.5Curl ID: 32
Thickness: 6.5
Tine - 20115
- Defl ector - 4101502170
Lotus (New) LH Shown
Length: 380Width: 98Curl ID: 37
Thickness: 9
LH Tine - 4101601490
RH Tine - 4101601590
- Defl ector - 4101502170
Lely Lotus Stabilo 600 LH Shown
Length: 360Width: 110Curl ID: 38
Thickness: 9
LH Tine - 4104311680
RH Tine - 4104311750
15 x 600 x 6 Complete wheelassembly - 4101620300
15 x 600 x 6 x 4 Tyre c/w tube to suit 4101620300 - 15X600X6X4
Gemini
LH Shown
Length: 370Width: 102Curl ID: 36
Thickness: 9
LH Tine - 41003208LH
RH Tine - 41003208RH
- Fixing set - 4100201490
- Spring - 4100302240
- Lever - 4101100540
Haymax
LH Shown
Length: 375Width: 111Curl ID: 42
Thickness: 9
LH Tine - 73130
RH Tine - 73135
Rotonde
LH Shown
Length: 368Width: 93Curl ID: 42
Thickness: 8
LH Tine 4102314860 4102304370
RH Tine 4102314970 4102304570
N.L.A
Grass Harvesting Lely
65www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Disc to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300 - 4101501430
Tine Holder to suit LelyTO SUIT MODELS SIDE PART NUMBERLotus Combi 300, Lotus 600 Stabilo Left hand 4101601480Lotus Combi 300, Lotus 600 Stabilo Right hand 4101601580
Lotus Hinge to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Lotus 460 / 520 / 600 / 640 / 675 / 725 / 770 Stabilo - 4101500560
Lotus Adjusting Block to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Lotus 460 / 520 / 600 / 640 / 675 / 725 / 770 Stabilo - 4101500570
Lotus Pin to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Lotus 460 / 520 / 600 / 640 / 675 / 725 / 770 Stabilo - 9111501010
Lotus Spring to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Lotus 460 / 520 / 600 / 640 / 675 / 725 / 770 Stabilo - 4101500540
Bush to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Lotus 460 / 520 / 600 / 640 / 675 / 725 / 770 Stabilo - 4101500550
Tine Head to suit LelyTO SUIT MODELS REPLACES PART NUMBER
Gemini 4.1011.0056.04.1011.0057.0 4101122200
Nut to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus, Gemini - 9103600043
Grass Harvesting Lely
66www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hinge Pin to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300 - 4101501910
PTO Cone Cover to suit LelyTO SUIT MODELS OEM NUMBER PART NUMBERLotus Combi 300, Superzip SZ - 4101500380
Parts to suit Lely / Welger Baler & WrapperTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
RP200
Length: 190Width: 70Curl ID: 30
Thickness: 5
Tine 0343.51.00.000940.52.25.00 0940522500
Length: 187Width: 70Curl ID: 30
Thickness: 5
Tine for models with wide pick up 0940.52.29.00 0940522900
Length: 365Width: 202
Thickness: 5Hole size: 22
Knife 0982.21.01.00 0982210100Z
ID: 11.9OD: 35
Height: 15Cam bearing - 572113B
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
RP202, RP220
Length: 190Width: 70Curl ID: 30
Thickness: 5
Tine 0343.51.00.000940.52.25.00 0940522500
Length: 190Width: 74Curl ID: 30
Thickness: 5.5
HD Tine 0940.52.67.00 0940526700
Length: 346Width: 220
Thickness: 5Hole size: 12
Knife 0982.21.04.00 0982210400Z
ID: 11.9OD: 35
Height: 15Cam bearing - 572113B
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Grass Harvesting Lely
67www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Lely / Welger BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
RP235
Length: 190Width: 70Curl ID: 30
Thickness: 5
Tine 0343.51.00.000940.52.25.00 0940522500
Length: 190Width: 74Curl ID: 30
Thickness: 5.5
HD Tine 0940.52.67.00 0940526700
Length: 360Width: 230
Thickness: 5Hole size: 12
Knife 0982.21.09.00 0982210900
ID: 11.9OD: 35
Height: 15Cam bearing - 572113B
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
RP245(Camless pick up)
Length: 205Width: 70Curl ID: 30
Thickness: 5.5
Middle tine - 0940527000
- Outer tine - 0940527100
Bearings to suit Lely / Welger BalerDIMENSIONS (mm) OEM NUMBER NON-GREASEABLE
PART NUMBERGREASEABLEPART NUMBERID OD DEPTH
30 62 16 0922129100 17262062RS G206NPPB35 72 17 0922128700 17262072RS G207NPPB40 80 18 0922128800 17262082RS G208NPPB50 90 20 0922129500 17262102RS G210NPPB
Simplex Chain to suit Lely / Welger Baler• BS Standard• Sold in 5 metre lengths
PITCH ROLL LENGTH ISO NUMBER PART NUMBER1" x 17.02mm 5 metres 16B-1 BS80
Grass Harvesting Malone / Marangon / Massey Ferguson
68www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Malone Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Disc MowerLH Shown
Hole Size: 21Length: 105Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 41966
RH Twisted blade(Box Qty 25) - 41967
Thread: M12Length: 29Width: 30Collar: 20
Blade holder - 4715200
Parts to suit Marangon Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
Hole Size: 21Length: 108Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120108
-
LH Shown
Hole Size: 21Length: 129.5
Width: 47Thickness: 4
LH Blade(Box Qty 25) - 129MEL
RH Blade(Box Qty 25) - 129MER
Parts to suit Massey Ferguson Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Rotary Mower
Hole Size: 21Length: 100Width: 45
Thickness: 4
Flat blade(Box Qty 25) - 878104M2
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
Hole Size: 23Length: 98Width: 46
Thickness: 4
Flat blade(Box Qty 25) - 1717782M1
Finger Bar Mower
Hole Size: 5.2Length: 80.2
Width: 76Thickness: 2
Smooth section(Box Qty 25) - D1140
Parts to suit Massey Ferguson BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Small Square Baler120, 124, 128
Length: 200Width: 82Curl ID: 32
Thickness: 5
Pick up tine 585136M1 585136M1N
Grass Harvesting McHale
69www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit McHale Balers & WrappersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
FUSION
Length: 191Width: 71Curl ID: 30
Thickness: 5.7
Pick up tine - CTN00008
- Fixing Set(Pack of 10) - KS00058
ID: 15OD: 40
Height: 15.9Cam bearing - LR52022RS
- Knife - BN40020
- Belt for Netting Drive & Tensioner - A66
F5000 Series
Length: 191Width: 71Curl ID: 30
Thickness: 5.7
Pick up tine - CTN00008
- Fixing set(Pack of 10) - KS00058
ID: 15OD: 40
Height: 15.9Cam bearing - LR52022RS
- Knife - BN40020
1" Duplex Chain to suitChopper Drive BS80DLX
1 1/4" Heavy Chain to suitMain Drive ASA100H
1 1/4" Standard Chain to suitRoller Drive BS100
-Belt for Netting
Drive & Tensioner
- SPB1410
- - A44
FUSION 2 - Belt for Netting Drive & Tensioner - A66
All Models 16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Grass Harvesting McHale / New Holland
70www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit New Holland Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
-
LH Shown
Hole Size: 16.25Length: 93Width: 40
Thickness: 3
LH Twisted blade(Box Qty 25) - 56151200
RH Twisted blade(Box Qty 25) - 56151300
-
LH Shown
Hole Size: 16.25Length: 95Width: 45
Thickness: 3.5
LH Blade(Box Qty 25) - 56151210
RH Blade(Box Qty 25) - 56151310
-
RH Shown
Hole Size: 18.25Length: 107Width: 45
Thickness: 4
LH Blade(Box Qty 25) 55903210 55903210
RH Blade(Box Qty 25) 55903310 55903310
-
LH Shown
Hole Size: 18.25Length: 123Width: 45
Thickness: 4
LH Twisted blade(Box Qty 25) - 56451200
RH Twisted blade(Box Qty 25) - 56451300
-
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) - 58699
RH Twisted blade(Box Qty 25) - 58700
-
Hole Size: 17.5Length: 129Width: 45
Thickness: 5
Stepped blade(Box Qty 25) - 534744
Genuine Walterscheid PTO parts to suit McHale Balers & WrappersTYPE DESCRIPTION OEM NUMBER PART NUMBER
WWE2480 Cross (32x27x76x94)with 1 Cap grease nipple - 3506141
Genuine Walterscheid PTO Shaft to suit McHale Balers & WrappersTO SUIT MODELS DESCRIPTION PART NUMBERF5000 Series WWE2480 complete wide angle PTO shaft WWE24801560K64/22R
WWE2480 half wide angle PTO shaft WWE24801474HALFFusion 2 PWE580 Power drive complete PTO shaft PWE5801610K64/22
Genuine Koyo Bearings to suit Rear Wheel of McHale BalerTO SUIT MODELS ID OD DEPTH PART NUMBER
F55050 90 24.75 3221065 120 24.75 30213
Grass Harvesting New Holland
71www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit New Holland BalerTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Square BalerHAYLINER 67 / 68 / 69 / 268 / 278
Length: 190Width: 112Curl ID: 29
Thickness: 5
Pick up tine - 127566
268 / 276 / 286 / 370 / 376 / 377
Length: 189Width: 70Curl ID: 32
Thickness: 5
Pick up tine 80131673 131673
370 / 376 / 377 / 378 / 920 / 930 / 935 / 940 / 945
- Needle - 535624
- Fixed fi nger - 536220
-Thread: M10Length: 45.2Width: 31.75
Bearing 535922 SRS304
-Thread: 3/4"UNF
Length: 2 1/4"Width: 2 1/2"
Bearing 444457688282 444457
-Thread: M20Length: 2 1/4”Width: 2 1/2”
Bearing 535664450310 535664
Flywheel65E / 68 / S68 / 78 / S78 / S268 / 274 / 276 / 278 / 286
5/16" x 2"Shear bolt
397165162UNC931
Lock nut to suit 516UNC985
Knotter370 / 376 / 377 / 378 / 386 / 387 / 940 / 945
6 x 40mmShear bolt
536886M640DIN931
Lock nut to suit M6DIN985
Flywheel376 10 x 60mm
Shear bolt544502
M1060DIN931
Lock nut to suit M10DIN985
Flywheel370 / 386 / 387(later type)
8 x 55mmShear bolt
554935M855DIN931
Lock nut to suit M8DIN985
We have a full range of paint colours available from stock. Contact a member of our Sales Staff with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
T R A C T O L Paint
Grass Harvesting Niemeyer
72www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Niemeyer Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
RO 166 / 167 / 170 / 187 / 190 / 211 / 212 / 230 / 270 / 271 275 / 301
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) - 96
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Hole Size: 16.5Hole Distance: 60
Length: 173Width: 124
Blade holder 570.425 570425
These models of Niemeyer Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
SM 260 / 310 / 750 / EURODISC
LH Shown
Hole Size: 19Length: 105Width: 48
Thickness: 3
LH Twisted blade(Box Qty 25) - 9041786
RH Twisted blade(Box Qty 25) - 9041776
Thread: M12Length: 28Width: 30Collar: 18
Blade holder011.064018.824503.175
11064
These models of Niemeyer Grass Mowers use the W2400 series of PTO parts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Parts to suit Niemeyer Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBERHR 301 / 361 / 362 / 401 / 441 / 460 II / 462 / 501 / 521 / 531 / 562 / 621 / 641 / 702 / 751 LH Shown
Length: 370Width: 120Curl ID: 38
Thickness: 9.5
LH Tine(yellow) - 600011
RH Tine(red) - 600012
HR 451 / 551 / 671 / 675 / 785 / 821 / 771 / 801 / 905GH / 1055GH / 1101GH
LH Shown
Length: 380Width: 127Curl ID: 50
Thickness: 9.4
LH Tine(yellow) - 600061
RH Tine(red) - 600062
16 x 650 x 8 Tyre c/w tube - 16X650X8X6
Parts to suit Niemeyer Grass SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
RS 425DA, 465DH, RS 700A, 730VA, RS 820V, 840VS
Length: 611Width: 92Curl ID: 38
Thickness: 9.5
Tine - 600040
Grass Harvesting Pottinger
73www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Pottinger Grass MowersTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Nova 260T, 310T
LH Shown
Hole Size: 18.5Length: 120Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) 434.988 58699
RH Twisted blade(Box Qty 25) 434.989 58700
Thread: M10Length: 32Width: 30Collar: 18
Blade holder - 81160K
- Drive belt - SPA3000(4 per mower)
- Conditioner belt - B71(4 per mower)
Nova 225, 265, 305, 350, 266, 400, 700, 930, 306, 8600
LH Shown
Hole Size: 21Length: 112Width: 49
Thickness: 4
LH Twisted blade(Box Qty 25)
434.969434.973 434969
RH Twisted blade(Box Qty 25)
434.970434.974 434970
Thread: M12Length: 28Width: 30Collar: 18
Blade holder011.064018.824503.175
11064
- Drive belt - SPB3000
Cat Nova, 260T, 310T, 360T, 3100T
LH Shown
Hole Size: 21Length: 120Width: 47
Thickness: 4
LH Twisted blade(Box Qty 25) 434.975 434975
RH Twisted blade(Box Qty 25) 434.976 434976
Cat 170D, 215 Nova,215 Alpine, 250, 260, 290, 310 Nova, Cat Disc 17 / 21 / 25 / 29 / 33
LH Shown
Hole Size: 18.5Length: 107Width: 48
Thickness: 4
LH Twisted blade(Box Qty 25) 434.985 90261559
RH Twisted blade(Box Qty 25) 434.986 90261560
Cat 165 ECO, 170 ECO
Hole Size: 21Length: 120Width: 50
Thickness: 4
Cranked blade(Box Qty 25) 434.122 434122
-
Hole Size: 21Length: 105Width: 47
Thickness: 3
Cranked blade(Box Qty 25) - CM120Z
Cat 165, 185, 210F, 245F, 186, 185, 190/CR,230/CR, 230 Plus F,190 Eco
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat blade(Box Qty 25) 434.991 96
-
Hole Size: 19Length: 96Width: 40
Thickness: 3
Flat bladeSuper Radura(Box Qty 25)
- 96SR
Grass Harvesting Pottinger
74www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Pottinger Grass TedderTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
EUROHIT 54, 61N, 61NZ, 69AZ, 69NZ, 80AZ, 80NZ, 81N, 81NZ, 91AZ, 91NZ, 95A, 105A, 130A
LH Shown
Length: 405Width: 105Curl ID: 53
Thickness: 10
LH Tine 436.150 436150
RH Tine 436.149 436149
- Fixing set - 405560
HIT 30, 40, 47, 54, 58, 69, 69AZ, 69NZ, 80AZ, 80NZ, 90, 90AZ, 90NZ
Length: 380Width: 105Curl ID: 53
Thickness: 10
Tine 436.148 436148
Parts to suit Pottinger Grass SwatherTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBERTOP / EUROTOP 42N, 420N, 460N, 770A, 421A, 421N, 461N, 601A, 691M, 771A, 851M, 881A
Length: 585Width: 85Curl ID: 48
Thickness: 9
Tine 436.031 436031
TOP 700A, 701A TOP / EUROTOP 280 / 280U / 340 / 340U / 340N / 380N / 680N (new), 620A, 650M, 651M, 800, 801 (to series 1185) / 1251
Length: 545Width: 98Curl ID: 46
Thickness: 9
Wide tine - 436032
Length: 550Width: 83Curl ID: 48
Thickness: 9
Narrow tine - 436033
Parts to suit Pottinger HarvesterTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
MEX 6
Length: 158Width: 65Curl ID: 25
Thickness: 5.5
Pick up tine 436.144 436144
Grass Harvesting Pottinger
75www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Pottinger Self Loading Forage WagonTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBERLW 512 - 514 “Boss”, Ernteplus, Ernteprofi ,Primo, Jumbo 6000, 6600, 7200, 8000Ladeplus, Pony, TOPI-V
Length: 158Width: 65Curl ID: 25
Thickness: 5.5
Pick up tine 436.144 436144
Euroboss 330
Length: 185Width: 68
Thickness: 5.5Pick up tine 436.151 436151
Length: 400Width: 203
Thickness: 5Hole size: 11
Knife 434.100 434100
Hole size: 50Bolt holes: 20
Bolt holedistance: 120
Swivel towing hitch - 8000348
Shaft: 1"Splines: 6 Hydraulic motor - OMP1251510333
Primo 400, 450, 500Faro 3500, 4000, 4500
Length: 185Width: 68
Thickness: 5.5Pick up tine 436.151 436151
Length: 400Width: 203
Thickness: 5Hole size: 11
Knife 434.100 434100
Hole size: 50Bolt holes: 20
Bolt holedistance: 120
Swivel towing hitch - 8000348
Europrofi 4000, 4500Torro 4500, 5100, 5700Jumbo 6010, 6610, 7210, 8010, 10000Jumbo 6010, 6610Combiline
Length: 185Width: 68
Thickness: 5.5Pick up tine 436.151 436151
Length: 430Width: 215
Thickness: 5
Knife to suit TorroPre 2009 and all
other models.434.126 434126
Length: 400Width: 270
Thickness: 5
Knife to suit TorroFrom 2009 434.135 434135
Hole size: 50Bolt holes: 20
Bolt holedistance: 120
Swivel towing hitch - 8000348
1 3/8" - 21 spline WWE2480End yoke - 358312
32x27x76x94 WWE2480Wide angle cross - 350600
These models of Pottinger Forage Wagons use the WWE2480 series of PTO shafts.See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Grass Harvesting Strautmann / Zero Grazing Systems
76www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Parts to suit Strautmann Silage WagonTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Mega Vitesse II / III / IVGiga Vitesse II / III / IVDO II / III / IV
Length: 161Width: 62Curl ID: 22
Thickness: 5
Pick up tine - 87010630
Length: 305Width: 230
Thickness: 5Hole size: 10.5
Knife 504.36.501504.36.507 50436501
Length: 1090Width: 40
Hole distance:110 / 60
Band - 87005743
Super Vitesse I / II
Length: 161Width: 62Curl ID: 22
Thickness: 5
Pick up tine - 87010630
Length: 475Width: 355
Thickness: 5Hole size: 14
Knife - 41018501
Length: 1090Width: 40
Hole distance:110 / 60
Band - 87005743
Vitesse 160E, 185E, 230E, 260E, 400E, 185, 185DO, 230, 230DO, 260, 260DO, 320
Length: 161Width: 62Curl ID: 22
Thickness: 5
Pick up tine - 87010630
Length: 407Width: 270
Thickness: 5Hole size: 14
Knife(main blade) - 41517500
Length: 407Width: 237
Thickness: 5Hole size: 14
Knife(end blade) - 41517501
Parts to suit Zero Grazing SystemsTO SUIT MODELS TYPE DIMENSIONS DESCRIPTION OEM NUMBER PART NUMBER
Zero Grazer
Hole Size: 21Length: 108Width: 47
Thickness: 3
Flat blade(Box Qty 25) - 495806
Grass Harvesting Universal
76awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
TubesVALVE TO SUIT TYRE PART NUMBER
TR1313X500X6T53913X500X6X413X650X6X4
13X500X6ST
TR13 15X600X6X4 15X600STTR13 16X650X8ST50 16X650X8TR13 18X650X8ST50 18X650X8TTR13 18X950X8ST50 18X850X8T
TR13
20X800X10TMT20X800X10ST5020X1000X8ST5020X1000X8TMT
20X800X10T
TR87 = Tube with bent valve TR13 = Tube with straight
VALVE TO SUIT TYRE PART NUMBERTR13 25X8.50-14 25X850X14TR87 300X4X4 300X4BTR87 350X6X4 350X6BTR13 350X6STTR87 400X4X4 400X4BTR87 400X6X4 400X8B
TR13
350X8X4400X8X4
400X8X4T510400X8X6
400X8ST
TR13 500X8X4 500X8ST
Tyres• All tyres are supplied complete with tube (with the exception of the tubeless ones)• Valve types: TR87 = Tube with bent valve TR13 = Tube with straight valve TL = Tubeless tyre
MEASUREMENTS PROFILE VALVE PLY TUBE TO SUIT PART NUMBER300 x 4 T-513 TR87 4 300X4B 300X4X4300 x 6 T-513 TR87 4 300X6B 350X6X4350 x 8 T-513 TR13 4 400X8ST 350X8X4400 x 4 T-513 TR87 4 400X4B 400X4X4400 x 6 T-510 TR13 4 400X8ST 400X6X4400 x 8 T-513 TR13 4 400X8ST 400X8X4400 x 8 T-510 TR13 4 400X8ST 400X8X4T510400 x 8 T-991 TR13 6 400X8ST 400X8X6500 x 8 T-522 TR13 4 500X8ST 500X8X4
13 x 500-6 ST-52 TR13 4 13X500X6ST 13X500X6X413 x 650-6 ST-52 TR13 4 13X500X6ST 13X650X6X415 x 600-6 T-510 TR13 4 15X600ST 15X600X6X416 x 650-8 T-510 TR13 6 16X650X8 16X650X8X618 x 7.50-8 Trelleborg T-539 TL 4 18X750X8T 18X750X8T539
20 x 10.00-8 Titan Multi Trac TL 4 20X800X10T 20X1000X8TMT
Tyre Profi les
T-510 T-513 T-522 T-539 T-991 ST-52 Titan Multi Trac
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
Grass Handling & FeedingLoaders, Shear Grabs, Diet Feeders
Loader Tines 78 - 80
to suit Redrock 89
Loader Tine Bushes 80
Pre-Bushed Tine Tubes 80
Euro Brackets 81
Euro Tool Frame 81
Shear Grab Blades 82
to suit Redrock 88
Diet Feeder Knives 83 - 90
Abbey 83
Anderson 83
Belmac 83
BVL 84
Condell Feedall 84
Conor 84
DTech 84
Faresin 85
Fleming 85
GH Engineering 85
Keenan 86
Kverneland 86
Mayer 87
Mixtec 87
Peecon 87
Redrock 88
Strautmann 89
Triolet-Mullos 89
Unifeed 90
Tub Feeder PTO Shafts 90
Load Cells 91 - 117
to suit Keenan 86
Grass Handling & Feeding Contents
77www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Grass Handling & Feeding Tines / Nuts
78www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
If it doesn’t havethe SHW stamp
it isn’t SHW.
SCHMIEDETECHNIK®
SHW Loader tines are the No.1 fi tted tine by all Irish & European manufacturers. A full range of SHW loader tines are available from stock at McHugh Components.
SquareProfi le
'H'Profi le
RoundProfi le
SCHMIEDETECHNIK®
SHW Standard Straight TinesTHREAD LENGTH PROFILE END MAX NUT
TORQUEBUSH PART NUMBER
Inch mmM20 x 1.5 26" 680 Square Point 450 Nm TB1 221193SHWM22 x 1.5 26" 680 H Point 500 Nm TB1 TB26M20 x 1.5 32" 800 Square Point 450 Nm TB1 221151SHWM22 x 1.5 32" 800 H Point 500 Nm TB1 TB32M24 x 1.5 32" 800 Square Point 550 Nm TB1 221189SHWM20 x 1.5 40" 1010 Square Point 450 Nm TB1 221155SHWM20 x 1.5 43" 1100 Square Point 450 Nm TB1 221152SHWM20 x 1.5 43" 1100 Square Spoon 450 Nm TB1 221156SHWM20 x 1.5 48" 1250 Square Point 450 Nm TB1 221153SHWM20 x 1.5 48" 1250 Square Spoon 450 Nm TB1 221157SHWM20 x 1.5 55" 1400 Square Point 450 Nm TB1 221154SHWM20 x 1.5 55" 1400 Square Spoon 450 Nm TB1 221158SHWM22 x 1.5 55" 1400 Round / H Point 500 Nm TB1 TBR55
SHW Stonefork Straight TinesTHREAD LENGTH PROFILE END MAX NUT
TORQUEBUSH PART NUMBER
Inch mmM28 x 1.5 32" 810 Square Point 700 Nm SB1 241160SHWM28 x 1.5 32" 810 Round Point 700 Nm - TBS32RM28 x 1.5 35" 890 Square Point 700 Nm SB1 TBS35M28 x 1.5 35" 890 Round Point 700 Nm SB1 TBS35RM28 x 1.5 39" 980 Square Point 700 Nm SB1 241161SHWM28 x 1.5 43" 1100 Square Point 700 Nm SB1 241166SHWM28 x 1.5 43" 1100 Square Spoon 700 Nm SB1 241165SHWM28 x 1.5 48" 1250 Square Point 700 Nm SB1 241162SHWM28 x 1.5 55" 1400 Square Point 700 Nm SB1 241163SHWM28 x 1.5 55" 1400 Square Spoon 700 Nm SB1 241167SHW
79www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Grass Handling & Feeding Tines / Nuts
Replacement Nuts to suit SHW TinesTHREAD DESCRIPTION PART NUMBERM20 x 1.5 M20 Eccentric Nut to suit SHW Tines 221202SHWM22 x 1.5 M22 Standard Nut to suit SHW Tines TBN221M22 x 1.5 M22 Eccentric Nut to suit SHW Tines TBN222M24 x 1.5 M24 Standard Nut to suit SHW Tines 016047SHWM28 x 1.5 M28 Standard Nut to suit SHW Tines 01013
SCHMIEDETECHNIK®
SHW Curved TinesTHREAD LENGTH PROFILE END MAX NUT
TORQUEBUSH PART NUMBER
Inch mmM20 26" 680 Square Point 450 Nm TB1 221194SHWM22 26" 680 H Point 500 Nm TB1 2226M20 32" 810 Square Point 450 Nm TB1 221192SHWM22 32" 800 H Point 500 Nm TB1 2232
SHW Round Tines - Pin AttachedDIAMETER
ØLENGTH PROFILE END HOLE SIZE PART NUMBER
Inch mm50mm 41" 1050 Round Flat nose point 14mm 401050SHW50mm 47" 1200 Round Flat nose point 14mm 401200SHW50mm 61" 1550 Round Flat nose point 14mm 401550SHW
SHW Cranked TinesTHREAD LENGTH PROFILE END MAX NUT
TORQUEBUSH PART NUMBER
Inch mmM20 x 1.5 32" 815 H Point 450 Nm TB1 TBC32M20 x 1.5 32" 815 Square Point 450 Nm TB1 221175SHWM20 x 1.5 36" 920 Square Point 450 Nm TB1 221177SHWM22 x 1.5 32" 815 H Point 500 Nm TB1 TBC3222M24 x 1.5 32" 815 Square Point 550 Nm TB1 221195SHW
Grass Handling & Feeding Economy Tines / Bushes / Pre-Bushed Tine Tubes
80www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Economy Straight TineTHREAD LENGTH PROFILE END BUSH PART NUMBER
Inch mmM22 x 1.5 32" 800 H Point TB1 FT1
Tapered Tine BushesOD LENGTH DESCRIPTION PART NUMBERmm mm41 110 Tine bush for standard tine TB150 110 Tine bush HD for standard tine TB00251 110 Tine bush for stonefork tine SB157 120 Tine bush HD for stonefork tine SB002
Pre-Bushed Tine Tubes - Conus 1LENGTH HOLES PART NUMBER820mm 5 FT0825990mm 6 FT0996
1200mm 7 FT12071400mm 8 FT14081600mm 9 FT16091700mm 9 FT1709
Grass Handling & Feeding Euro Bracket / Euro Tool Frame
81www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Euro Bracket AssemblyDESCRIPTION PART NUMBEREuro bracket pre-jigged assembly 10373
Euro Bracket SetDESCRIPTION PART NUMBEREuro bracket set LH & RH assembly 10372
Euro Bracket HookDESCRIPTION PART NUMBEREuro bracket hook 10370
Euro Bracket EyeDESCRIPTION PART NUMBEREuro bracket eye 10371
Euro Type Quick Attach Tool FrameApplication: Front loaderSpeci cation: Central locking mechanismTechnical Information: Euro standardWidth: 1110mm
DESCRIPTION PART NUMBEREuro type quick attach tool frame FT2060
Grass Handling & Feeding Shear Grab Blades
82www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bucket Edge StripsA range of bucket edge strips and knives are available to order. Contact a member of our Sales Staff with your enquiry.
Side Knife Rail Profi le
Available to order in lengthsof 1600 - 6400mm
Bucket Edge Strip
Available to order in lengthsof 2000 - 6000mm
Bucket Edge Strip1/2 Arrow Profi le
Available to order in lengthsof 2000 - 6000mm
Wearing Strips
Available to order in lengthsof 3000mm
Shear Grab Blade (Full Section)Available in Standard or HardoxHardox: Hardened metal with precision fi nished blade
THICKNESS LENGTH TYPE STANDARDPART NUMBER
HARDOXPART NUMBER
8 200 Full section 8200 8200HX
Shear Grab Blade (Half Section)Available in Standard or HardoxHardox: Hardened metal with precision fi nished blade 8150L - Left Hand Shown 8150LHX - Left Hand Shown
THICKNESS LENGTH TYPE STANDARDPART NUMBER
HARDOXPART NUMBER
8 150 LH section 8150L 8150LHX8 150 RH section 8150R 8150RHX
Standard
Straight Shear Grab BladeAvailable in Standard or HardoxHardox: Hardened metal with precision fi nished blade
THICKNESS LENGTH DESCRIPTION STANDARDPART NUMBER
HARDOXPART NUMBER
10 780 Straight Shear Grab Blade 10780 10780HX
Hardox
Grass Handling & Feeding Abbey / Anderson / Belmac
83www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Diet Feeder Knife to suit AndersonTo suit models: Tub Feeder
DESCRIPTION PART NUMBERVertical knife to suit Anderson diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit AndersonTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit Anderson diet feeder 382597RH knife to suit Anderson diet feeder 382598
89
194
97 27x1220x12
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit BelmacTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Belmac diet feeder FM01999
Diet Feeder Knife to suit AbbeyTo suit models: Tub Feeder
DESCRIPTION PART NUMBERVertical knife to suit Abbey diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit AbbeyTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit Abbey diet feeder 382597RH knife to suit Abbey diet feeder 382598
89
194
97 27x1220x12
Grass Handling & Feeding BVL / Condell Feedall / Conor / DTech
84www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit BVLTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit BVL diet feeder FM01999
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit Condell FeedallTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Condell Feedall diet feeder FM01999
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit ConorTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Conor diet feeder FM01999
Diet Feeder Knife to suit DTechTo suit models: Tub Feeder
DESCRIPTION PART NUMBERVertical knife to suit DTech diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit DTechTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit DTech diet feeder 382597RH knife to suit DTech diet feeder 382598
89
194
97 27x1220x12
Grass Handling & Feeding Faresin / Fleming / GH Engineering
85www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Diet Feeder Knife to suit FaresinTo suit models: Paddle Type Diet Feeder
DESCRIPTION PART NUMBERVertical knife to suit Faresin diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit FaresinTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit Faresin diet feeder 382597RH knife to suit Faresin diet feeder 382598
89
194
97 27x1220x12
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit FlemingTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Fleming diet feeder FM01999
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit GH EngineeringTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit GH Engineering diet feeder FM01999
Grass Handling & Feeding Keenan / Kverneland
86www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Body Blade to suit Keenan Diet FeederDESCRIPTION THICKNESS SIDE PART NUMBERBody blade to suit Keenan 5mm LH 90043LBody blade to suit Keenan 5mm RH 90043RBody blade to suit Keenan 6mm LH 90066LBody blade to suit Keenan 6mm RH 90066RBolt to suit body blade (8.8 Strength) M1030DIN60388Spring washer to suit body blade M10DIN127BNut to suit body blade M10DIN934
Left Hand
Right Hand
Edge Knife to suit Keenan Diet FeederDESCRIPTION THICKNESS LENGTH PART NUMBEREdge knife to suit Keenan 10mm 991mm 80025
25mm Pitch
290mm
Diet Feeder Knife to suit KvernelandDESCRIPTION PART NUMBERKnife to suit Kverneland KD612 / KD614 1560635KDBolt to suit M1025DIN60388
10.896
Diet Feeder Knife to suit KvernelandDESCRIPTION PART NUMBERParabolic knife to suit Kverneland diet feeder 1560177KD
Bolt to suit M1025DIN60388M1030DIN60388
Diet Feeder Knife to suit KvernelandTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Kverneland diet feeder 1050254
535
215
Ø20
Ø12
104
Load Cells to suit Keenan Diet FeederSupplied with cable and 5 pin plug
CAPACITY OVERALLLENGTH
DIAMETER CABLELENGTH
PART NUMBER
4100 Kg 395 45 / 54 9 metres FUS34WTK1CC15000 Kg 445 64 5 metres FUS50TBHK011
FUS34WTK1CC1 FUS50TBHK011
Grass Handling & Feeding
87www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Mayer / Mixtec / Peecon
Diet Feeder Knife to suit MayerTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Mayer diet feeder 1050254
535
215
Ø20
Ø12
104
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit MixtecTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Mixtec diet feeder FM01999
Diet Feeder Knife to suit PeeconTo suit models: Tub Feeder
DESCRIPTION PART NUMBERVertical knife to suit Peecon diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit PeeconTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit Peecon diet feeder 382597RH knife to suit Peecon diet feeder 382598
89
194
97 27x1220x12
Grass Handling & Feeding Redrock
88www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Diet Feeder Knife to suit RedrockTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Redrock diet feeder 31841
348
230
160120
Ø10
Ø17
Shear Grab Blade (Full Section) to suit RedrockSIDE LENGTH THICKNESS WIDTH HOLE
SIZEOEM
NUMBERPART NUMBER
mm mm mm- 210 8 220 12.5 100.085 100085
Bolt to suit - M1220DIN7991
Shear Grab Blade (3 Hole) to suit RedrockSIDE LENGTH THICKNESS WIDTH HOLE SIZE OEM
NUMBERPART NUMBER
mm mm mm mmLH 280 8 125 12.5 109.083L 109083LRH 280 8 125 12.5 109.083R 109083R
Bolt to suit - M1220DIN7991Right Hand Shown
Shear Grab Blade to suit RedrockSIDE LENGTH THICKNESS WIDTH HOLE SIZE OEM
NUMBERPART NUMBER
mm mm mm mmLH 830 8 125 12.5 100.083L 100083LRH 830 8 125 12.5 100.083R 100083R
Bolt to suit - M1220DIN7991
Right Hand Shown
Shear Grab Blade (Half Section) to suit RedrockSIDE LENGTH THICKNESS WIDTH HOLE SIZE OEM
NUMBERPART NUMBER
mm mm mm mmLH 160 8 220 12.5 100.086L 100086LRH 160 8 220 12.5 100.086R 100086R
Bolt to suit - M1220DIN7991Right Hand Shown
Grass Handling & Feeding Redrock / Strautmann / Triolet-Mullos
89www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SHW Stonefork Straight Tines to suit RedrockTHREAD LENGTH PROFILE END BUSH PART NUMBER
Inch mmM28 x 1.5 32" 810 Round Point - TBS32RM28 x 1.5 35" 890 Square Point SB1 TBS35M28 x 1.5 35" 890 Round Point SB1 TBS35R
Round Profi le
Square Profi le
Diet Feeder Knife to suit StrautmannDESCRIPTION PART NUMBERKnife to suit Strautmann diet feeder 60903500Bolt to suit M1650DIN7991Nut to suit M16DIN985
455
245
220
18
8080
11
Diet Feeder Knife to suit Triolet-MullosTo suit models: Solomax 1 Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Triolet-Mullos diet feeder 31841
348
230
160120
Ø10
Ø17
Grass Handling & Feeding Unifeed / PTO Shafts
90www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Diet Feeder Knife to suit UnifeedTo suit models: Tub Feeder
DESCRIPTION PART NUMBERVertical knife to suit Unifeed diet feeder FM01134
Bolt to suit M1660DIN7991M1670DIN7991
525
245
80
80
226
M20
Diet Feeder Knife to suit UnifeedTo suit models: Tub Feeder
DESCRIPTION PART NUMBERLH knife to suit Unifeed diet feeder 382597RH knife to suit Unifeed diet feeder 382598
89
194
97 27x1220x12
525
245
80
80
205
M18
M12
Diet Feeder Knife to suit UnifeedTo suit models: Tub Feeder
DESCRIPTION PART NUMBERKnife to suit Unifeed diet feeder FM01999
Note: Wider range of feed wagon / tub feeder knives available from our suppliers.If you require knives for a machine not listed in this section please contact our offi ce.
Genuine Walterscheid PTO Shaft to suit Tub FeedersMACHINE TO SUIT APPLICATION / DESCRIPTION PART NUMBER
Tub Feeder
- W2400 1010mm c/w 1 3/4" 20 spline on one end W400E1010351802SD25
- W2480 W/A 1010mm c/w KB61/20 M10 shearbolt WWE24801010SB
- W2480 W/A 1210mm c/w KB61/20 M8 shearbolt WWE24801210SB
Grass Handling & Feeding Load Cells
91www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
PTM Srl.PTM Srl is a market leader in weighing technologies and systems. They have been designing and producing innovative systems for over thirty years and McHugh Components Ltd are proud to bring these products to the Irish market.
The programme of Electronic Weight Indicators, Load Cells and Accessories on offer is extensive and boasts the following features:
• Higher quality, stronger load cells. All load cells are manufactured using tempered stainless and alloy steel to allow greater strength and exibility.
• By using a unique manufacturing process which heats the components and adhesives before assembly, PTM load cells have a stronger resistance, higher signal quality and longer working life than other products on the market. (Many manufacturers glue electronic components into cells, which reduces the life of the cell.)
• PTM systems have gold contacts as standard which facilitates a superior transmission of signal.
• PTM systems use military metal connectors as standard.
• Monitors have an additional third connecting port as standard which allows for the addition of a remote display unit or portable printer as needed by the operator.
• PTM have developed a high quality quick connect junction box which is the Market leader in regard to installation and ease of use.
• PTM test 100% of the products that they produce. They also carry out rigorous vibration tests on the range of monitors they supply.
Grass Handling & Feeding Load Cells
92www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL10 & HL15
Weighing indicators specifi cally developed for systems with minimal overall dimensions.Highly suited to and practical to install on Tractors.
Speci cally developed to carry out weighing operations on systems where the space available to install a scale is limited, the HL10 and HL15 weighing indicators have very compact overall dimensions and are very easy to use.
Standard features include:
• A high luminescence, high visibility 6 digit LED display.• A highly practical 16 function keypad control.• Connectors with Golden contacts.• Protection against power supply inversions or overcharge by means of an auto reset fuse.
Both models allow the operator to control the function of the partial and total weights of any components to be loaded or unloaded.
In addition, the HL15 model allows the operator to set out up to 15 recipes and 20 components according to animal or total weight, with the possibility of changing the name of the recipe itself. It also has an alarm that signals the end of the loading operation, which can be integrated with the weighing computer directly or given by way of an external alarm.
Both models are supplied with a multi language system, warranty control and with the capacity to record and store data relating to any possible overloads.
HL20, HL25, HL30 & HL50
Weighing computers for loading and unloading operations.
The weighing indicators in this range have been speci cally developed to allow the automation of the loading and unloading operations making them both quicker and easier than before.
The series ranges from the basic HL20 model to the complete HL50 model and standard features include:
• A unique double display system. A backlit LCD display to visualise information from different functions and a high luminescence, high visibility 5 digit LED display which visualises any weights.• Aluminium Casing.• Connectors with Gold contacts.• Additional port for optional devices.• Protection against power supply inversion or overcharge by means of an auto reset fuse.
All of the models in the series control the function of Total weight, Partial weight and weight block with the HL30 and HL50 models also allowing the operator to programme recipes according to the number of animals, total weight or percentages. It is possible to change the name of the recipe and components, to carry out percentage variations in the total amount to load, to save the accumulations of the loaded quantities and recalculate the quantities of the components to load.
All models can be connected to different types of remote displays, remote controls, printers and other optional devices and come supplied with a multi language system, warranty control and capacity to record and store data from any possible overloads that may occur with the system.
Grass Handling & Feeding Load Cells
93www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL10 - Weighing System with Partial and Total Weight Functions
Equipped with a large bright 6 digit LED display and a comprehensive 16-function keypad, this weighing indicator controls the partial and total weight of any components to be loaded or unloaded.
Main Features:• Partial weight and total weight• 5 Languages• Zero settings and calibration set up from keyboard
DESCRIPTION PART NUMBERWeighing system with partial and total weight functions HL10
Technical Specifi cations:• High sensitivity membrane keyboard• ABS Casing• Protection class: IP65 with plug-in connectors• Size L 180 x H 95 x W 60 mm• Weight: 530g• Display: 6 red LED digits 13 x 9 mm• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -30 to +70ºC• Relative humidity: 95%
• Power supply: 12V dc• Absorbing power: 5 VA max• Load cells in parallel connection: Max 10 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -9999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Direct control of working tension• Consumption: 500 mA
Optional Devices:• Metallic plate for covering• Protection steel fender• Serial output RS232• AV20/5• Big display• Alarm
Grass Handling & Feeding Load Cells
94www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL15 - Weighing System for the Management of 15 Recipes and 20 Components
Equipped with a large bright 6 digit LED display and a comprehensive 16-function keypad, this weighing indicator controls the partial and total weight of any components to be loaded or unloaded. It also allows the operator to set 15 different recipes from 20 different components and is tted with an internal alarm that signals the end of the loading operation.
Main Features:• 15 recipes and 20 components• Programmed functions of loading and unloading• Partial weight and total weight• Possibility to operate per "Total" or per "Number of Animals"• Accumulations• 5 Languages• Alarm on board
DESCRIPTION PART NUMBERWeighing system for the management of 15 recipes and 20 components HL15
Technical Specifi cations:• High sensitivity membrane keyboard• ABS Casing• Protection class: IP65 with plug-in connectors• Size L 180 x H 95 x W 60 mm• Weight: 530g• Display: 6 red LED digits 13 x 9 mm• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -30 to +70ºC• Relative humidity: 95%
• Power supply: 12V dc• Absorbing power: 5 VA max• Load cells in parallel connection: Max 10 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -9999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Direct control of working tension• Consumption: 500 mA
Optional Devices:• Metallic plate for covering• Protection steel fender• Serial output RS232• AV20/5• Big display• Alarm
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
ComponentNames
Programming Recipes
Weight Recalculation
Yes 20 15 15 40 Yes Animal total weight No
Grass Handling & Feeding Load Cells
95www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL20 - Weighing System with Partial and Total Weight Functions
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL20 records and holds information from the last 5 overloads that have occurred highlighting the maximum overload and the length of time it lasted. There is also an additional port on the unit, which allows for a printer or remote portable device to be added.
Main Features:• Big numbers• Double display• Partial weight• Total weight• Possibility to print• Zeroing and calibration settleable from software
DESCRIPTION PART NUMBERWeight indicator control panel with LED display for up to 12 load cells HL20
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1800 g• Display: 5 red LED digits 45 x 28 mm Backlit LCD (2 Lines, 16 characters per line)• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 6 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 800 mA
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
ComponentNames
Programming Recipes
Weight Recalculation
Yes 0 0 0 0 No No No
Optional Devices:• Remote display AV20/5• Remote display AV40/5• RF Remote display AV50• Remote display AV80
• Big display• Alarm• Printer• Remote control RF7
Grass Handling & Feeding Load Cells
96www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL25 - Weighing System for the Management of 1 Upload or 1 Unload
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL25 records and holds information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or bypreprogramming 1 upload and 1 discharge process via the automatic mode.
Main Features:• Big numbers• Double display• Managing of 1 load / Managing of 1 unload• Pre alarm at 85%• Alarm lasting time when load is complete • Weight blocking during handling• Data print options available
DESCRIPTION PART NUMBERWeighing system for the management of 1 upload or 1 unload HL25
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1800 g• Display: 5 red LED digits 45 x 28 mm Backlit LCD (2 Lines, 16 characters per line)• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 6 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 800 mA
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
ComponentNames
Programming Recipes
Weight Recalculation
Yes 1 1 0 0 No No No
Optional Devices:• Remote display AV20/5• Remote display AV40/5• RF Remote display AV50• Remote display AV80
• Big display• Alarm• Printer• Remote control RF7
Grass Handling & Feeding Load Cells
97www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL30 - Weighing System for the Management of 15 Recipes and 15 Components
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL30 records and holds information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or bypreprogramming up to 15 recipes from 15 different components.
DESCRIPTION PART NUMBERWeighing system for the management of 15 recipes and 15 components HL30
Main Features:• 15 recipes / 15 components in loading and in unloading• Pre alarm at 85%• Alarm lasting time when load is complete • Administration of the name of the components and recipes• Final mixing time• Accumulations and block for movements• Data print option available
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1800 g• Display: 5 red LED digits 45 x 28 mm Backlit LCD (2 Lines, 16 characters per line)• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 6 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 800 mA
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
RecipeNames
Programming Recipes
Weight Recalculation
Yes 15 15 15 40 Yes Animals, Totals, Percentages Yes
Optional Devices:• Remote display AV20/5• Remote display AV40/5• RF Remote display AV50• Remote display AV80
• Big display• Alarm• Printer• Remote control RF7
Grass Handling & Feeding Load Cells
98www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
HL50 - Weighing System for the Management of 50 Recipes and 30 Components
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL50 records and holds information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or bypreprogramming up to 50 recipes from 30 different components.
DESCRIPTION PART NUMBERWeighing system for the management of 50 recipes and 30 components HL50
Main Features:• 50 recipes / 30 components in loading and in unloading• Pre alarm at 85%• Alarm lasting time when load is complete • Administration of the name of the components and recipes• Final mixing time• Accumulations and block for movements• Data print option available
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1800 g• Display: 5 red LED digits 45 x 28 mm Backlit LCD (2 Lines, 16 characters per line)• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 6 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 800 mA
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
RecipeNames
Programming Recipes
Weight Recalculation
Yes 30 50 50 40 Yes Animals, Totals, Percentages Yes
Optional Devices:• Remote display AV20/5• Remote display AV40/5• RF Remote display AV50• Remote display AV80
• Big display• Alarm• Printer• Remote control RF7
Grass Handling & Feeding Load Cells
99www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
GRAPHIC A USB - Weighing SystemWeighing system for the automation of loading and unloading operations ofUnifeed Mixer Feeder Wagons, and data transmission to a PC via USB Memory
Weighing control unit engineered for quicker and smoother automation of the Unifeed Mixer Feeder Wagons loading and unloading operations. With its high-luminescence high-visibility graphic display, it enables setting of up to 80 recipes and 20 components and relevant recipe dosing per individual animal and per total number of animals, of single ingredient speci cation options (e.g. hay, silo feed, maize, etc.), of recipe speci cation options (e.g. milk, fattening, dry feed, etc.), it is equipped with multilingual graphic interface system, innovative warranty control system via the built-in hour meter, an intelligent mixer feeder wagon overcharge monitoring and control system, data storage of time and number of overcharge event occurrences, accumu-lation control system, mixer time interval setting options, required data printing options. Possibility of importing/exporting recipes and data to and from PC through USB Pen Drive to be processed via Data-Mix-Card program. Backup data storage on the scale and possibility of data transfer to a PC, useful function if USB Pen Drive should be damaged. If required the Topcut function is available and it allows the management of blades that could be installed to hash the material inside the mixer wagon.
DESCRIPTION PART NUMBERGRAPHIC A USB weighing system HL80A
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1900 g• Display: Graphic, 240 x 128 pixel• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 5 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 1000 mA
Main Features:• 80 recipes• 20 components• Loading and unloading data backup management• Multilingual• Calculation of ration per animal• Working mode for individual animal or for groups• Accumulations• Data print options.• TopCut management possibility• Computer connection• Dedicated software packs (Data Mix Card 3.50)
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
UploadGroups
USBMemory
PCConnection
Yes 20 20 80 40 No Yes Data Mix Card3.50.XX
Optional Devices:• Remote display AV20/5• Remote display AV30/5• RF Remote display AV50• RF Remote display AV80• Remote display D.G.
• Big Display• Printer• Remote control RF7• Alarm
Grass Handling & Feeding Load Cells
100www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Data Mix Card 3.50Software for data transfer from the weighing computer Graphic Memory A and to PC and vice versa, through Pen Drive USB or Memory Card
The Data Mix Card software is based on the PTM’s long experience in the eld of animals feeding and its management. Thanks to this software there is the great opportunity to get, without any waste of time, a clear and reliable picture of the feeding of our animals. Furthermore, obtained information can be usefully taken into consideration when calculating each recipe.
DESCRIPTION PART NUMBERData mix card 3.50 - software to work in conjunction with GRAPHIC A DMC350
Data Mix Card software, together with Graphic Memory A and Graphic A USB scales, offers the following possibilities:
• Simple programming of the recipes, with suitable name, up to 80 different recipes, with 20 components each.• Possibility to quickly modify the ration in comparison with the percentage of adjustment of each single component and recipe.• Graphic representation of the percentage related to the distribution of each component.• Data transfer to a PC through the memory card and a USB reader or pen drive.• Loading and unloading data back up while working, through USB pen drive.• Possibility of managing more scales simultaneously.• Setting a components list with the opportunity to input the cost per kilo.• Warehouse management and easy representation of available quantities.• Alarm working as per xed minimum limit duly set.• Management of one customer archive for companies that work on behalf of third parties.• Multilingual system.• Possibility to transfer the data directly to Excel.• Compatible with all Windows systems.• Possibility to input the milk produced data and the relevant sales price per litre (or Kg) to calculate automatically proceeds and the proceeds / costs ratio.• Comprehensive data archive function.
Archive Functions
• Easy and quick representation of the performed operations in relation to: (i) Recipe. (ii) Time. (iii) Customers. (iv) Working trend. (v) Cards.
• Report generation: (i) Complete print = detailed representation of affected operations. (ii) Small print = representation of effective operations with main data. (iii) Consumption report. (iv) Print of costs = representation of labour costing per recipe.
Grass Handling & Feeding Load Cells
101www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
GRAPHIC SUPER USB - Weighing SystemWeighing system for the automation of loading and unloading operations ofUnifeed Mixer Feeder Wagons, and data transmission to a PC via USB Memory
Weighing control unit developed for quicker and smoother automation of loading and unloading operations of Unifeed Mixer Feeder Wagons. Supplied with high-luminescence high-visibility graphic display, it allows to set out up to 150 recipes, each with 30 ingredients in load and 50 unloads, as well as their relative dosing per single animal and per total number of animals. It is possible to give a name to single ingredients (e.g. hay, silo feed, maize, etc.), to recipes (e.g. milk, fattening, dry feed, etc.), and to unloading operations. The loading of ingredients with to-the-gram accuracy is also possible. Instant atmospheric temperature display function provided. It features: an interactive graphic interface system in 15 languages - freely selectable via code entry -, an innovative warranty control system via built-in hour counter, an intelligent system of monitoring and control of mixer feeder wagon overcharge - with data storage of time and number of overcharge events -, accumulation control system, possibility of setting the mixing time interval and printing required data. The TOPCUT function is available. The possibility of importing/export-ing recipes and operational data via USB-PenDrive memory to and from PC for processing through Super-Data-Mix 5 software is also provided, as well as the possibility to save backup data on the weighing computer and transfer them to PC (useful in case the USB-Pendrive is damaged).
DESCRIPTION PART NUMBERGRAPHIC SUPER USB weighing system HL150A
Technical Specifi cations:• High sensitivity membrane keyboard• Casting aluminium casing• Protection class: IP68 with plug-in connectors• Size L 230 x H 180 x W 65 mm• Weight: 1900 g• Display: Graphic, 240 x 128 pixel• Display visible in full sunlight• Memory: Eeprom, non-volatile• Available weight divisions: 1 - 2 - 5 - 10 Kg• Time / Calendar• Resolution: - 135000 dd• Operating conditions: -20 to +70ºC• Relative humidity: 95%
• Power supply: da 11 a 28V dc• Absorbing power: 5 VA max• Load cells in parallel connection: Max 12 (350 )• Load cell power supply: 5 Vcc• Margin of reading error: ± 1 Kg out of 10,000 Kg• Display data field: ± 99999 to -99999• Measuring range: ± 2 mV to ± 20 mV• Conversion speed per second: 10 / sec.• Serial outputs: 1 fixed, 2 optional• Protection against radio frequency interferences• Elimination of power supply interferences• Signalling of low tension• Consumption: 1000 mA
Scale Features:Total / Partial
WeightProgramming Component
Loading
Programming Unload Number
Number ofRecipes
Number of Component
Names
UploadGroups
USBMemory
PCConnection
Yes 30 50 150 99 99 Yes Super DataMix 5.XX
Optional Devices:• Remote display AV20/5• Remote display AV30/5• RF Remote display AV50• RF Remote display AV80• Remote display D.G.• Big Display
• Printer• Remote control RF7• Temperature probe• CAN-Bus• ZigBee• Alarm
Main Features• 150 recipes • 30 ingredient in load • 50 unloads per recipe• Programming per animals or totals• Possibility of programming components, recipes, groups and wagons from PC• Possibility of modifying and creating recipes on the weighing computer thanks to the data transferred from PC• Atmospheric temperature display• Data print possible • Multi language • Built-in hour counter• Control system of overcharges• Possibility of selecting the weight division• Possibility of calibrating the weighing computer in grams• Computer connection through USB-Pendrive• Data backup management• Dedicated software (Super Data Mix 5)
Grass Handling & Feeding Load Cells
102www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Super Data Mix 5XXSoftware for data transfer from the weighing computer Graphic Super Memory and Graphic Super USB to PC and vice versa through Memory Card or USB Pendrive
Thanks to experience gained with the softwares Data-Mix-Card and Super Data Mix 4, PTM is now able to offer even more in the eld of animals feeding and management, by proposing the software Super Data Mix 5. Interfaced with the weighing computers Graphic Super Memory and Graphic Super USB, it allows to handle and programme several functions: from the pos-sibility to manage single unload groups to the detailed re-elaboration of the costs of recipes and single components, from the opportunity to personalize the component stock to the detection of instantaneous atmospheric temperature during the working operations, from the calculation of the nutritive value of each single recipe and of the quantity of dried substance to load to the possibility to set out the loading operation according to weight or dried substance. Thanks to this software there is the chance to get a clear and reliable picture of the feeding of your animals without any waste of time. The information obtained regarding the productivity of animals can also be usefully taken into consideration when calculating each recipe.
DESCRIPTION PART NUMBERSuper data mix card 5XX - software to work in conjunction with GRAPHIC SUPER DMC5XX
The Super Data Mix Software, used with the weighing computers Graphic Super Memory and Graphic Super USB, offers the following possibilities:
• Programming of up to 99 cards• Data transfer to the weighing computer through USB key or Memory Card• Use of more cards at the same time• Management of alarm percentages for loading and unloading operations• When working with USB key, it is possible to activate the function of data backup, in order to avoid losing information in case the USB key is broken or damaged• Compatible with Windows XP, Windows Vista and Windows 7 32 and 64 bit• Data export to Excel or Text le• Simple programming of recipes with suitable name, up to 150 different recipes• Possibility to programme up to 30 components per recipe• Possibility to modify the quantity to be loaded by varying the quantity to load of each single component or of the whole recipe according to a percentage• Graphic representation of the distribution percentage of each single component during recipe programming• Management of the percentage of dried substance for each component, with its nutritive value and cost (pro Kg)• Processing of recipe costs• Processing of the costs of each single operation;• Management of labour cost• Management of milk price• Calculation of recipe proceeds and bene ts• Graphic representation of cost trend• Management of a customer database• Possibility to register the deliveries with quantity and arrival date of the material• Management of a common stock and of the single stocks of the different customers, each with its alarm quantity• Management of data regarding external atmospheric temperature• Management of a loading archive, with possibility of searching a speci c operation and displaying the details of this operation
Continued on the next page . . .
Grass Handling & Feeding Load Cells
103www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
• Possibility to print reports for one or more operations in the loading archive; it is possible to print: - Complete report - Minimum report - Consumption report - Operation list - Report on working time of each operation; - List of the loaded recipe components; - List of the loaded recipe components with corresponding values of dried substance (All these reports can be exported to Excel or Text le.)
• Management of an unloading archive, with possibility of searching a speci c operation and registering the amount of produced milk• Possibility to print reports for one or more operations in the unloading archive; it is possible to print: - Complete report - Minimum report - Operation list - Report on working time of each operation - Report on milk production (All these reports can be exported to Excel or Text le.)
• Display of partial amounts to load for each wagon;• Possibility to send the database to the PTM technical department to nd a solution to the problems;• Possibility to replace, compress and make a backup copy of the database;• Possibility to ask for a wireless device to transfer data from the PC to the weighing computer (through ZigBee technology).
Grass Handling & Feeding Load Cells
104www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
AV50
This innovative and highly functional hand held device facilitates the complete remote control of the HL weighing system. It is connected via a radio frequency transmitter and has a high quality dual display with a large 6 digit LED and keyboard function with the exact functions of the HL system allowing a simple and practical crossover.
Main Features:• Repeater display featuring an RF signal transmission system• AV50 is provided with a keyboard, which has the keys with the same functions of the scales already mentioned• Fixing support for tractor available on request
Technical Characteristics:• High sensibility membrane keyboard• Container in ABS• Protection: IP 65• Dimensions: Length: 110mm Height: 210mm Depth: 40mm• Weight: 450g• First Display: Alphanumerical, backlit LCD (2 lines, 16 characters per line)• Second Display: 6 alphanumerical, red LED digits• Memory: Non volatile• Batteries: 2 lithium-ion rechargeable• Operating conditions: -20 to + 60º C• Relative humidity: 95%• Power supply: from 11 to 28 Vdc• Absorbed power: 5 VA consumption during charging• Transceiver: A868 MHz in Fm• Internal RF Antenna• Signal of low battery tension• Range of use: Up to 50 metres• 4 Transmission channels available for the connection of relevant devices simultaneously
DESCRIPTION PART NUMBERHigh function hand held remote to use in conjunction with HL20, 25, 30 & 50 weighing system AV50
Radio Frequency Transmitter for use with AV50 / AV80Radio frequency transmitter to suit AV50 and AV80 remote portable dispaly units.
DESCRIPTION PART NUMBERRadio transmitter to suit AV50 and AV80 AV5080RFT
Tractor Mounted Battery Charger to suit AV50Stainless steel tractor mounted charger (12/24V) to suit AV50.
DESCRIPTION PART NUMBERTractor mounted battery charger to suit AV50 AV50BC2
Table Battery Charger to suit AV50Table battery charger (220V) to suit AV50 remote portable display unit.
DESCRIPTION PART NUMBERTable battery charger to suit AV50 AV50BC1
Replacement Battery to suit AV50DESCRIPTION PART NUMBERReplacement battery to suit AV50 FGKITBATAV01
Grass Handling & Feeding Load Cells
105www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
AV80
This innovative and highly functional portable device facilitates the complete remote control of the main functions of the HL weighing system. It is connected via a radio frequency transmitter and has a high quality display with a multi functional touch keypad which allows complete integration with the HL weighing system.
Main Features:• Repeater display featuring an RF signal transmission system• Equipped with some keys in order to join similar menus of scales• Weight repeater display, to be also put on the arm with an elastic strap
Technical Characteristics:• High sensibility mechanical keyboard• Container in ABS• Protection: IP 54• Dimensions: Length: 150mm Height: 100mm Depth: 45mm• Weight: 330g• Display: Alphanumerical, backlit LCD (2 lines, 14 characters per line)• Memory: Non volatile• Batteries: 1 lithium-ion rechargeable• Operating conditions: -20 to + 60º C• Relative humidity: 95%• Power supply: from 11 to 28 Vdc• Absorbed power: 4 VA consumption during charging• Transceiver: A868 MHz in Fm• Internal RF Antenna• Signal of low battery tension• Range of use: Up to 50 metres• 4 Transmission channels available for the connection of relevant devices simultaneously
DESCRIPTION PART NUMBERHigh function hand held remote to use in conjunction with HL20, 25, 30 & 50 weighing system AV80
Radio Frequency Transmitter for use with AV50 / AV80Radio frequency transmitter to suit AV50 and AV80 remote portable display units.
DESCRIPTION PART NUMBERRadio transmitter to suit AV50 and AV80 AV5080RFT
12V Plug Power Supply to suit AV8012V plug in power supply to suit AV80 remote portable display unit.
DESCRIPTION PART NUMBER12V plug in power supply to suit AV80 AV80BC1
Table Battery Charger to suit AV80Table battery charger (220V) to suit AV80 remote portable display unit.
DESCRIPTION PART NUMBERTable battery charger to suit AV80 AV80BC2
Vehicle Mount Bracket for use with AV80DESCRIPTION PART NUMBERVehicle mount bracket to suit AV80 AV80VMB
Grass Handling & Feeding Load Cells
106www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Power Cable for Control BoxDESCRIPTION LENGTH PART NUMBER2 Pin power supply cable to suit control box 7.6 metre SC762
Junction Box - 7 ConnectionsDESCRIPTION PART NUMBERJunction box with 7 connections JB7IN
Junction Box - 5 ConnectionsDESCRIPTION PART NUMBERJunction box with cable presses and clamps JBL1
Quick Attach Junction Box for attaching 4 Load CellsDESCRIPTION PART NUMBERLoad cell quick attach junction box - 4 connections JB4IN-8
Quick Attach Junction Box for attaching 6 Load CellsDESCRIPTION PART NUMBERLoad cell quick attach junction box - 6 connections JB6IN
Square Load Cell Connection CableDESCRIPTION LENGTH PART NUMBERConnection cable to suit square load cells 6 metres JCSS6
Mixer Wagon Load Cell Connection CableDESCRIPTION LENGTH PART NUMBERConnection cable to suit square load cells 7 metres JCMW7
Grass Handling & Feeding Load Cells
107www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SB1 Stainless Steel - Shear Load Cells 250 to 2000 Kg
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications such as platforms, silos, tanks, dosing systems, etc.
Technical Specifi cations:• Accuracy class (to OIML IR60) C3• Nominal full scale load (Ln): 250, 500, 1000, 2000Kg• Nominal sensitivity FSO: 3 mV/V• Tolerance on sensitivity at Ln: <±0.35%F.S.• Combined errors - Non-linearity: <±0.03%F.S. Hysteresis: <±0.03%F.S. Repeatability: <±0.02%F.S.• Creep (after 30 min at Ln) <±0.02%F.S.• Zero balance: <±1.00%F.S.• Thermal drift in compensated range - Zero calibration: <±0.02%F.S. Sensitivity: <±0.02%F.S.• Normal input impedance: 350 ±5• Normal output impedance: 350 ±3• Isolation resistance: >5000 M• Nominal power supply voltage: 10 Vdc• Maximum power supply voltage: 15 Vdc• Compensated temperature range: -10 to +40ºC• Maximum temperature range: -20 to +50ºC• Storage temperature range: -10 to +60ºC• Maximum load: 120% Ln• Breaking load: 150% Ln• Protection class (DIN 40050) IP67, IP68
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.03%• Non-sensitive to shear loads• Protection class IP67, IP68
LOAD CAPACITY A B C D E F G H FIXING DISTANCE PART NUMBER250 Kg 29.8 31.75 15.75 25.4 76.2 12.65 130 9 57 SB1-K2C5500 Kg 31.75 31.75 15.75 25.4 76.2 12.65 130 9 57 SB1-K5C
1000 Kg 31.75 31.75 15.75 25.4 76.2 12.65 130 9 57 SB1-K1M2000 Kg 31.75 31.75 15.75 25.4 76.2 12.65 130 9 57 SB1-K2M
max 18
H
A
B
C D E F
M12
Ø13.4 (3 holes)
Fixing distance
G
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
108www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SB1 Stainless Steel - Shear Load Cells 3000 to 7500 Kg
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications such as platforms, silos, tanks, dosing systems, etc.
Technical Specifi cations:• Accuracy class (to OIML IR60) C3• Nominal full scale load (Ln): 3000, 5000, 7500• Nominal sensitivity FSO: 3 mV/V• Tolerance on sensitivity at Ln: <±0.35%F.S.• Combined errors - Non-linearity: <±0.03%F.S. Hysteresis: <±0.03%F.S. Repeatability: <±0.02%F.S.• Creep (after 30 min at Ln) <±0.02%F.S.• Zero balance: <±1.00%F.S.• Thermal drift in compensated range - Zero calibration: <±0.02%F.S. Sensitivity: <±0.02%F.S.• Normal input impedance: 350 ±5• Normal output impedance: 350 ±3• Isolation resistance: >5000 M• Nominal power supply voltage: 10 Vdc• Maximum power supply voltage: 15 Vdc• Compensated temperature range: -10 to +40ºC• Maximum temperature range: -20 to +50ºC• Storage temperature range: -10 to +60ºC• Maximum load: 120% Ln• Breaking load: 150% Ln• Protection class (DIN 40050) IP67, IP68
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.03%• Non-sensitive to shear loads• Protection class IP67, IP68
LOAD CAPACITY A B C D E F G H J FIXING DISTANCE PART NUMBER3000 Kg 40.6 38 19.1 38.1 95.3 19 171.5 12 13 80 SB1-K3M5000 Kg 40.6 38 19.1 38.1 95.3 19 171.5 12 13 80 SB1-K5M7500 Kg 40.6 38 19.1 38.1 95.3 19 171.5 12 15 80 SB1-K7M5
max 18
H
A
B
C D E F
J
Ø20.5 (2 holes)
Fixing distance
G
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
109www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SB1 Stainless Steel - Shear Load Cells 10000 Kg
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications such as platforms, silos, tanks, dosing systems, etc.
Technical Specifi cations:• Accuracy class (to OIML IR60) C3• Nominal full scale load (Ln): 10000Kg• Nominal sensitivity FSO: 2 mV/V• Tolerance on sensitivity at Ln: <±0.35%F.S.• Combined errors - Non-linearity: <±0.02%F.S. Hysteresis: <±0.02%F.S. Repeatability: <±0.01%F.S.• Creep (after 30 min at Ln) <±0.02%F.S.• Zero balance: <±1.00%F.S.• Thermal drift in compensated range - Zero calibration: <±0.02%F.S. Sensitivity: <±0.02%F.S.• Normal input impedance: 350 ±5• Normal output impedance: 350 ±3• Isolation resistance: >5000 M• Nominal power supply voltage: 10 Vdc• Maximum power supply voltage: 20 Vdc• Compensated temperature range: -10 to +50ºC• Maximum temperature range: -20 to +60ºC• Storage temperature range: -10 to +60ºC• Maximum load: 100% Ln• Breaking load: 200% Ln• Protection class (DIN 40050) IP67, IP68
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.03%• Non-sensitive to lateral loads• Protection class IP67, IP68
LOAD CAPACITY A B C D E F G H J FIXING DISTANCE PART NUMBER10000 Kg 42 38 19.1 38.1 95.3 18.8 171.3 40 41 80 SB1-K10M
max 18
H
A
B
C D E F
J
Ø20.5
Fixing distance
GØ15
Ø16
1x45
º
1x45
º
R 20
20
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
110www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Round Load Cells 3400 to 5000 Kg
The Unifeed series weighing sensors are extremely tough and have been developed for application in Mixer Feeder Wagons. These weighing load sensor cells are principally suitable for operations in humid environments. In fact it is thanks to their special protection that they are non-sensitive to a range of speci c factors. This product line aptly showcases PTM’s thirty year long experience in the mobile application load cell construction sectors.
Parallel Electrical Connection of Multiple Load CellsExecute the parallel connection of multiple load cells by connecting the same coloured wires up together. For systems implementing multiple parallel-connected load cells, the nominal load is given by the total sum of the single load cell capacities. System sensitivity though, is given by the average value of each single cell sensitivity values. It is important to ensure that load is distributed equally to the single cells. No single cell must be stressed beyond its maximum rating under any load condition.
Electrical ConnectionThe screen is isolated from the cell body. Screen connection to device grounding is recommended.
Cable Length and Connector OptionsThe sensor cells can be ordered with special cable lengths, customized to customer requirements. The cable lengths speci ed on the catalogue constitute the standard product cable lengths. Upon customer request, the sensor cells can also be tted with a connector.
Red = Excitation+
Green = Signal+
Black = Excitation-
White = Signal-
Shield = Screen
LOAD CAPACITY PART NUMBER3400 Kg RB134QC
Supplied with 5 pin quick connection
Ø44
.5
Ø10
Ø70
Ø54
87 125
10 242 145
397
LOAD CAPACITY PART NUMBER4500 Kg RB145
Ø54
2570 105
25
18.5
Ø70
253.5303.5
LOAD CAPACITY PART NUMBER5000 Kg RB150
Ø54
Ø70
18.5
122.5 105 122.5350
Grass Handling & Feeding Load Cells
111www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
CM1 Stainless Steel - Compression Load Cells 500 to 10000 Kg
The CM Series of load cells have been engineered for compression measuring in limited spaces. Use of parallel connected multiple cell arrangements make them very suitable for a number of industrial weighing applications. A special sealing feature makes them particularly suitable for humid and dusty environments.
Technical Specifi cations:• Nominal full scale load (Ln): 500, 1000, 2500, 5000, 7500, 10000Kg• Rated output: mV/V -2• Output tolerance: 0.1% F.S.• Nominal sensitivity FSO: 2 mV/V+/-0.1%• Tolerance on sensitivity at Ln: <±0.35%F.S.• Combined errors - Non-linearity: <±0.03%FSO Hysteresis: <±0.03%FSO Repeatability: <±0.03%FSO• Creep (after 30 min at Ln) <±0.01%FSO• Creep at normal load after 4 hrs. 0.03%• Zero balance: +/-1.00%• Thermal zero drift: 0.003%F.S./ºC• Thermal drift on F.S.: 0.002%F.S./ºC• Input impedance: 700-710 • Output impedance: 700-702 • Isolation resistance: 10000 M• Maximum power supply voltage: 15 Volt• Temperature effect on zero: 0.005%/ºC• Temperature effect on FSO span: 0.003%/ºC• Operating temperature range: -20 to +70ºC• Temperature compensation: -10 to +40ºC• Maximum static load: 150%• Breaking load: 300% F.S.• De ection at nominal load: 0.4mm• Protection class (DIN 40050) IP67 - IP68
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.03%• Reduced dimensions• Corrosion-resistant
LOAD CAPACITY A B C D E F PART NUMBER500 Kg 82 44 32 22 14 12 CM-K5C1000 Kg 82 44 32 22 14 12 CM1-K1M2500 Kg 82 44 32 22 14 12 CM1-K2M5C5000 Kg 82 44 32 22 14 12 CM1-K5M7500 Kg 82 44 32 22 14 12 CM1-K7M5C10000 Kg 82 44 32 22 14 12 CM1-K10M
ØD
CE
F
B
ØA
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
112www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
CM1 Stainless Steel - Compression Load Cells 15,000 to 50,000 Kg
The CM Series of load cells have been engineered for compression measuring in limited spaces. Use of parallel connected multiple cell arrangements make them very suitable for a number of industrial weighing applications. A special sealing feature makes them particularly suitable for humid and dusty environments.
Technical Specifi cations:• Nominal full scale load (Ln): 15000, 20000, 25000, 30000, 35000, 50000Kg• Rated output: mV/V -2• Output tolerance: 0.1% F.S.• Zero tolerance: 1% F.S.• Nominal sensitivity FSO: 2 mV/V+/-0.1%• Combined errors - Non-linearity: <±0.03%FSO Hysteresis: <±0.03%FSO Repeatability: <±0.03%FSO• Creep (after 30 min at Ln) <±0.01%FSO• Creep at normal load after 4 hrs. 0.03%• Zero balance: +/-1.00%• Thermal zero drift: 0.003%F.S./ºC• Thermal drift on F.S.: 0.002%F.S./ºC• Input impedance: 700-710 • Output impedance: 700-702 • Isolation resistance: 10000 M• Maximum power supply voltage: 15 Volt• Temperature effect on zero: 0.005%/ºC• Temperature effect on FSO span: 0.003%/ºC• Operating temperature range: -20 to +70ºC• Temperature compensation: -10 to +40ºC• Maximum static load: 150%• Breaking load: 300% F.S.• De ection at nominal load: 0.4mm• Protection class (DIN 40050) IP67 - IP68
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.03%• Reduced dimensions• Corrosion-resistant
LOAD CAPACITY A B C D E F PART NUMBER15,000 Kg 100 48 35 28 - 20 CM1-K15M20,000 Kg 100 48 35 28 - 20 CM1-K20M25,000 Kg 126 54 40 35 - 20 CM1-K25M30,000 Kg 126 54 40 35 - 20 CM1-K30M35,000 Kg 126 54 40 35 - 20 CM1-K35M50,000 Kg 165 80 60 60 - 20 CM1-K50M
ØD
ØA
BC
E int.F
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
113www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SB2 Stainless Steel - Shear Load Cells 6000 Kg
The SB2 cells belong to the “shear” load cell series. They are therefore extremely rigid towards measured load and lateral or transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications such as platforms, silos, tanks, dosing systems, etc.
Technical Specifi cations:• Accuracy: 0.04%• Nominal full scale load (Ln): 6000 Kg• Nominal sensitivity FSO: 2 mV/V• Tolerance on sensitivity at Ln: <±0.2%FSO• Combined errors - Non-linearity: <±0.04%FSO Hysteresis: <±0.04%FSO Repeatability: <±0.04%FSO• Creep (after 30 min at Ln) <±0.05%F.S.• Zero balance: <±0.50%F.S.• Thermal drift in compensated range - Zero calibration: <±0.10%FSO/10K Sensitivity: <±0.05%FSO/10K• Normal input impedance: 350 ±5• Normal output impedance: 350 ±3• Isolation resistance: >10 GOhm• Nominal power supply voltage: 10 Vdc• Maximum power supply voltage: 15 Vdc• Compensated temperature range: -10 to +40ºC• Maximum temperature range: -20 to +50ºC• Storage temperature range: -10 to +60ºC• Maximum application load: 150% Ln• Breaking load: 300% Ln• Maximum static side load: 100% Ln• Maximum dynamic load (DIN 50100): 70% Ln• Maximum deformation at Ln: <0.5mm• Protection class (DIN 40050) IP66
The overall combined error and thermal shift data comply with the casing shell limits as de ned by OIML regulation IR60.
Main Features:• Stainless steel composition• Combined errors: 0.035%• Non-sensitive to shear loads• Protection class IP67 - IP68
LOAD CAPACITY DESCRIPTION PART NUMBER6000 Kg SB2 Stainless steel shear load cell - without connection SB2K6M-16000 Kg SB2 Stainless steel shear load cell - with connection SB2K6M-2
23 62 94.5 20.5
110 90
39
Ø24 Ø24 Ø21
18
18 max200
Ø57
.5
45
Red = Out+
White = In+
Yellow = Out-
Green = In-
Shield = Screen
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
114www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
SB8 Stainless Steel - Shear Load Cells 10000 Kg
The SB8 load cells have a double shear beam structure made of high quality alloy steel. Low pro le, simple to install, easy to use. Working for both dynamic and static loading. Different connecting method according to different using environment. Widely used for forestry, agriculture, garbage transport and axle load weighing, etc.
Technical Specifi cations:• Rated output: <±0.5mV/V• Nominal full scale load (Ln): 10000 Kg • Combined errors - Non-linearity: <±0.05%FSO Hysteresis: <±0.05%FSO Repeatability: <±0.01%FSO• Creep (after 30 min at Ln) <±0.02%F.S.• Zero balance: <±1.00%F.S.• Temperature effect - On zero: <±0.02%FS/10º On output: <±0.02%FS/10º• Normal input impedance: 385 ±10• Normal output impedance: 350 ±5• Isolation resistance: >5000 MOhms• Nominal power supply voltage: 10V (dc/ac)• Maximum power supply voltage: 20V (dc/ac)• Compensated temperature range: -10 to +50ºC• Maximum temperature range: -20 to +60ºC• Safe overload: 120% FS• Protection class: IP67
Main Features:• Alloy steel• Combined errors: 0.05%• Protection class IP67
LOAD CAPACITY DESCRIPTION PART NUMBER10000 Kg SB8 Stainless steel shear load cell SB8K10M-1
2834
117 R6
45
28
38
6078 38
M20 x 4 Ø21.5 x 4
76162292330
10
10
Load Cell Connection and Cable LengthLoad cells can be supplied with the required cable length to suit your application. They can also be supplied with a 5 pin quick connection which can be used in conjunction with quick connection junction boxes (listed on page 106) which allow easy installation / replacement.
Grass Handling & Feeding Load Cells
115www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Information about the Correct Installation of Electric Weighing Systems
Connection for Load Cells on Mixer WagonsConnect always all white wires of the load cells with the white wire of the scale cable. Repeat said operation for the Red, Green and Black wires.
Optional
-12V dc
+12V dc
5 Pins connector back-side
AEB
DC
Connection for Stainless Steel Load CellsConnect always all yellow wires of the load cells with the yellow wire of the scale cable. Repeat said operation for the Green, White and Red wires.
Optional
-12V dc
+12V dc
5 Pins connector back-side
AEB
DC
Grass Handling & Feeding Load Cells
116www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
TELE-RF Device Functions:• Working either via cable or radio frequency• Complete programming of the keys available• Up to 28 available outputs for each remote control• Up to 3 actionable outputs from each key• 4 different types of function available on the keys• Choice among 4 different types of outputs• Programming customized functions possible• Management of up to 10A for each single output• Management of up to 30A for more outputs activated at the same time• Unlimited function combinations available• Extreme versatility for several applications (straw cutter, mixer wagon, tun wagon, cranes, platforms, etc..)• 6 available inputs from proximity sensors, external buttons or micro switches to block / release the user• Display supplied with radio frequency signal communication• Working reach up to 50m via radio frequency (in free eld)• Integrated antenna, or external antenna mounted outside the box on board, according to the user’s requirements• Terminal to control and visualize the functions• Possibility to control 2 hydraulic ow adjustment motors• Equipped with xing support• Emergency key and button to immediately stop the operations and switch the device off• Valve protection against short circuits• Complete protection fuses• Resistant to strong mechanical stress
DESCRIPTION PART NUMBERWireless / wired remote control for use with control boxes TELERF
The TELERF remote terminal has been developed to satisfy the requirements of remote control and automation via wireless or cable transmission. It is possible to control any system: electric, electro hydraulic, etc. and this device allows to directly control the operations carried out by the machine (e.g. straw-cutting machines, mixer wagons, tun wagons, cranes, platforms, etc,) and directly manage the contacts (electro valves or relays) associated to a speci c operation; it is also possible to activate more than one function at the same time.
In addition to that, for greater clarity of the operations in progress, all the active controls are visualized on the alphanumeric LCD display. This remote control operates by means of a Power board installed on board of the machine, where the connections to the devices to control are made (such as electro valves, micro inputs, etc.)
Thanks to the integrated software, it is possible to adapt and set out the system according to one’s requirements, just by setting out the wished parameters of the remote control. This device is prepared to manage up to 28 electro valves, 4 of which of proportional type, and 4 relays; that allows to use both on/off devices and adjustable devices. In addition to that, 6 outputs can be activated both through the remote control and by means of 6 external inputs, such as proximity sensors, micro switches or buttons. Two further analogical inputs 0-5V or 0-10V are also available.
As far as the safety of operator and machine is concerned, it is possible to carry out the following operations: set out a time lag before starting the driving control of a user, interblock two opposing controls, signal the activation of an output through led (in order to increase the visual check of the operator), and immediately stop all operations thanks to an emergency button, without switching the device off. In order to make the system even safer, two emergency buttons are available: one is placed on the remote control, while the second one is mounted on the box on board of the machine, which is connected to the valves; by pressing one of these two keys, any operation in progress is immediately stopped.
Some models allow to manage the TopCut function both automatically and manually. Thanks to the unlimited number of combinations and con gurations available, the device is perfectly suitable for various applications. The wireless version of this remote control has four different channels which allows up to four separate systems to be used without the possibility of any interference, and is characterized by a reach of more than 50 mt; on the other hand, the cable version gives a higher level of safety for the operator, in case potentially dangerous moving mechanical parts are present.
All valve outputs are protected against short circuits and electrical problems; a protection fuse is also available against power supply inversions and overcharge. The device can work without problems, even when it undergoes strong vibrations and mechanical stress; in addition to that, the boxes are shockproof. In conclusion, assembling and disassembling the board on the machine for service or maintenance operations is easy and quick, because all the connections to the valves are made by means of removable terminal boxes.
Grass Handling & Feeding Load Cells
117www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Power Board Technical Features:• Plastic casing• Protection: IP55• Size: L254 xH180 xW111 (+ 6mm in depth for the xing support)• Weight: 3,000 g MAX• Memory: Eeprom Non-volatile• Operating condition: -20ºC to + 50ºC• Relative Humidity: 95 %• Power supply: From 11 to 28 Vdc• Absorbed power: 5 VA during the charge of battery• Transreceiver: A868 MHz in FM• Protection against radiofrequencv interferences• Elimination of power supply interferences and signalling of low tension• Plug to connect the device to the machine battery• Consumption: 250 mA (with electrovalves not active) Max 25 A (with active electrovalves)
Remote Control Technical Features:• Mechanical keyboard• ABS Housing• Protection: IP65• Size: L110 xH210 xW40 (+6 mm in depth for the fixing support)• Weight of the remote control: 330 g• Display: Backlit LCD (2 lines, 16 characters per line)• Display visible in full sunlight• Memory: Eeprom Non-volatile• Batteries: 2 rechargeable Lithium batteries (RF version)• Battery autonomy: 10h• Battery charge time: 5h• Operating condition: -20ºC to +60ºC• Relative Humidity: 95 %• Power supply: From 11 to 28 Vdc• Absorbed power: 5 VA during the charge of battery• Transreceiver: A868 MHz in FM• Protection against radiofrequency interferences• Elimination of power supply interferences and signalling of law tension• In the cable version, the Power board directly provides the system with the power supply• Consumption: 250 mA (with electrovalves not active)
Tractor Mounted Battery Charger to suit TELE-RFStainless steel tractor mounted charger (12/24V) to suit TELE-RF.
DESCRIPTION PART NUMBERTractor mounted battery charger to suit TELE-RF AV50BC2
Table Battery Charger to suit TELE-RFTable battery charger (220V) to suit TELE-RF remote portable display unit.
DESCRIPTION PART NUMBERTable battery charger to suit TELE-RF AV50BC1
Accessories for Wireless TELE-RF:
Accessories for Cable Controlled TELE-RF:
Mounting Plate to suit TELE-RFDESCRIPTION PART NUMBERMounting plate to suit TELE-RF TELERFP1
Cable to suit TELE-RFDESCRIPTION PART NUMBERCable to suit TELE-RF TELERF1
Grass Handling & Feeding Electronic Counter
118www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
FLEX COUNTER - Electronic CounterThe Flex Counter can be used for multiple purpose within the agricultural sector. The Flex Counter can measure the following:Speed Indicator, Area Counter, Unit Counter, Revolution Counter, Working Hours and Wrap Counter
DESCRIPTION PART NUMBERElectronic counter system including control box, sensor fi ttings and batteries FLX001
Technical Specifi cations:• Display: 4 digits• Power supply: 2 x 1.5V (AA Batteries)• Temperature limits: The Flex Counter is fully operational within -10ºC to 70ºC. This does not necessarily apply for all type of batteries please check with your local battery dealer.• Pulse from the sensor: Max. 167 pulse signals per second. Min. pulse- time: 0.6 ms - the magnet must activate the sensor for 1/10 of the time at 9999 rpm.• Area counter: Max. 0.100 Ha. per second = 360 Ha. per hour• Unit counter: Max: 0.167 additions per second = 10,000 pcs./10 m3 per minute, and 600,000 pcs./600 m3 per hour• Clock: +/- 0.5%. Has influence on the accuracy of the following functions: speed (km/h), rpm and working hours.
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
Grassland & HedgeToppers, Hedge Cutters, Aerators, Grass Harrows
Belmac 120
Bomford 120
Bridgeway 121
Conor 122
Einbock 122
McConnel 123 - 124
Nugent 124
Grassland & Hedge Contents
119www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Grassland & Hedge Belmac / Bomford
120www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Topper Flail to suit BelmacDESCRIPTION BUSH TO SUIT PART NUMBERTopper blade to suit Belmac UTB002 T0001B
75mm
320mm
Thickness = 7mm
Ø 26mm
Bush to suit Belmac Topper Flail DESCRIPTION HEIGHT ID OD PART NUMBERTopper fl ail bush 14.3 16.05 25 / 38 UTB002
Booty Flail to suit Bomford Hedge CutterDESCRIPTION LENGTH WIDTH PART NUMBERBooty fl ail to suit Bomford 84 40 / 68 CK2900
Shackle to suit Bomford Hedge CutterDESCRIPTION LENGTH WIDTH PART NUMBERShackle to suit Bomford 60 28 0589501N
Spacer to suit Bomford Hedge CutterDESCRIPTION LENGTH ID OD PART NUMBERSpacer to suit Bomford 26.6 16.7 25.3 0280701
Collar to suit Bomford Hedge CutterDESCRIPTION LENGTH ID OD PART NUMBERSpacer to suit Bomford 26 10.5 15 / 19 0280101
Bolt & Nut Assembly to suit Bomford Hedge CutterDESCRIPTION LENGTH WIDTH PART NUMBERBolt & nut assembly to suit Bomford 86 - 0367525
Complete Replacement Flail Kit to suit Bomford Hedge CutterKit Includes:• Flail• Shackle• Spacer• Collar (x2)• Bolt & Nut
DESCRIPTION PART NUMBERComplete replacement fl ail kit to suit Bomford hedge cutter HFK002
Grassland & Hedge Bridgeway
121www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Aerator Blade to suit BridgewayApplication: Mounted trailed (3 metre model)
DESCRIPTION LENGTH PART NUMBERAerator blade to suit Bridgeway 200 08014
Bush to suit Bridgeway Topper Flail DESCRIPTION HEIGHT ID OD PART NUMBERTopper ail bush 14.3 16.05 25 / 38 UTB002
Topper Flail to suit BridgewayDESCRIPTION BUSH TO SUIT PART NUMBERRH Topper blade to suit Bridgeway UTB002 T0001ALH Topper blade to suit Bridgeway UTB002 T0001B
75mm
320mm
Thickness = 7mm
Ø 26mm
Left Hand Shown
Grassland & Hedge Conor / Einbock
122www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bush to suit Conor Topper Flail DESCRIPTION HEIGHT ID OD PART NUMBERTopper fl ail bush 14.3 16.05 25 / 38 UTB002
Topper Flail to suit ConorTo suit models: Early models (26mm hole on blade)
DESCRIPTION BUSH TO SUIT PART NUMBERRH Topper blade to suit Conor UTB002 T0001ALH Topper blade to suit Conor UTB002 T0001B
75mm
320mm
Thickness = 7mm
Ø 26mm
Left Hand Shown
Bush to suit Conor Topper Flail DESCRIPTION HEIGHT ID OD PART NUMBERTopper fl ail bush 32 20.25 29.95 CTB001
Topper Flail to suit ConorTo suit models: Later models (30mm hole on blade)
DESCRIPTION BUSH TO SUIT PART NUMBERRH Topper blade to suit Conor CTB001 T0008ALH Topper blade to suit Conor CTB001 T0008B
75mm
320mm
Thickness = 7mm
Ø 30mm
Left Hand Shown
Spring Tine to suit Einbock Grass HarrowTo suit models: 6 metres
Length: 510Width: 38Curl ID: 40
DESCRIPTION PART NUMBER7mm Spring tine to suit Einbock grass harrow 9990018mm Spring tine to suit Einbock grass harrow 999001EV
Tine Holder to suit 7mm TineDESCRIPTION PART NUMBERTine holder to suit 7mm tine 999003
Grassland & Hedge Major
122awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Left Hand ShownTopper Flail to suit Major
DESCRIPTION BUSH TO SUIT PART NUMBERRH Topper blade to suit Major - T0005ALH Topper blade to suit Major - T0005B
75mm
270mm
Thickness = 8mm
Ø 30mm
Grassland & Hedge McConnel
123www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Rotor Bearing to suit McConnel F10H Hedge CutterDESCRIPTION PART NUMBERDeep groove bearing to suit McConnel F10H hedge cutter 63112RSC3
Hydraulic Filter to suit McConnel F10H Hedge CutterDESCRIPTION PART NUMBERHydraulic fi lter to suit McConnel F10H hedge cutter HF6177
Hedge Cutter Flail to suit McConnel F10HNB: Cast & Forged Flails cannot be mixed on same rotor
TYPE DESCRIPTION LENGTH BORE PART NUMBERmm mm
Cast Heavy duty fl ail 150 25 1840093Forged Long Life Heavy duty fl ail 150 25 031840093
Note: 1 metre machine has 20 fl ails, 1.2 metre has 24 fl ails
Hedge Cutter Flail Bush to suit McConnel F10HTo suit 1840093 / 031840093 Flail
DESCRIPTION O.D. LENGTH BORE PART NUMBERmm mm mm
Flail bush 25 39 16.5 184106
Hedge Cutter Flail Bolt & Nut to suit McConnel F10HDESCRIPTION PART NUMBERHedge cutter fl ail bolt to suit McConnel F10H 77513747Hedge cutter fl ail bolt nut to suit McConnel F10H M1615DIN985
Complete Replacement Flail Kit to suit McConnel F10HKit Includes:• Heavy duty cast fl ail• Flail bush• Bolt & Nut
DESCRIPTION PART NUMBERComplete replacement fl ail (cast HD) kit to suit McConnel F10H HFK001
Grassland & Hedge McConnel / Nugent
124www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hedge Cutter Flail to suit McConnel F12HTYPE DESCRIPTION LENGTH BORE PART NUMBER
mm mmCast Flail to suit McConnel 120 20.5 7114312N
Hedge Cutter Flail Bush to suit McConnel F12HTo suit 7114312N
DESCRIPTION O.D. LENGTH BORE PART NUMBERmm mm mm
Flail bush to suit F12H 20 44 12.5 7114108N
Bolt & Nut Assembly to suit McConnel F12HDESCRIPTION PART NUMBERBolt & Nut set to suit McConnel F12H 7114082N
Topper Flail to suit McConnelTo suit models: Rhino
Length: 515Width: 100Hole size: 38Thickness: 12
DESCRIPTION BUSH TO SUIT PART NUMBERLH Topper blade to suit McConnel - CK6160LRH Topper blade to suit McConnel - CK6160R
Right HandShown
75mm
320mm
Thickness = 7mm
Ø 32mm
Topper Flail to suit NugentDESCRIPTION BUSH TO SUIT PART NUMBERTopper blade to suit Nugent - T0009A