Technical caTaloguegranules

Founded in 1896, with an experience of over 30 years in the field of plastics processing, Teraplast is the largest Pvc processor in Romania.

The company’s products portfolio is structured on four business segments:• Pvc Tubes and Paneling Systems• Pvc joinery profile systems• Granules • PVC thermo-insulating joinery

Since 2008, Teraplast is listed on Bucharest Stock Exchange.

Teraplast is the largest PVC granules producer on the domestic market.

Technical caTalog

PVc granules pg.2/3

Since 1896

The Research and Development programs are funded by both companies’ own resources and national and European founds.In 2012, the R&D Center conducted research activities in order to improve the performances of the products but also to develop new ones. Teraplast’s strategy requires enhancing the R&D activity so that we can continuously provide various professional solutions in order to meet the needs of our clients.

In the past five years the company has invested over 26 million euros relocating the production plant from Bistriţa to the new Teraplast industrial park, located in unincorporated municipality.

Teraplast currently holds production facilities near Sărăţel, which cover over 13,000 square meters, divided into PVC products factory (PVC pipe and profiles branches, granules) and Polyolefin plant (polyethylene tanks, PVC, PP and PE fittings and PP pipe section).

The development of the production facilities was correlated with investments in research and development programs. The annual funds allocated to this department represent an important percentage of the company’s turnover.Moreover, Teraplast is part of the National Research and Development System and is registered in the Register of Potential Contractors due to the Research Center the company owns.

Electric use GranulesTeraplast’s granules comply with RoHS Directive restricting the use of heavy metals Pb, Hg, Cd, Cr +6 and PBB and PBDE compounds in electrical and electronic equipment. The formulations used for the production of these granules are developed according to our clients requests.Our range of products is customized using different types of plasticizers: DEHP (compound found in the REACH list as potentially dangerous) DINP, DOTP, or DIDP, etc. (substances not included in REACH regulation).

PlaSTiCizEd GRaNUlES

Field of application Type of granule Trade name Code FeaturesDensity g/cmc Hardness

SH

Sheath for flexible cords• Voltage - max.1 kV• Temperature - max 70 °C

ST1/ST2 - according to SR CEI 60502YM2 - according to VDE 0207 andTM2 - according to SR EN 50363

F ALB GPLF901002 1,3 75

GYM2 SH.85 GPLGYM2901103 1,49 85

GYM2 WHITE 148 GPLGYM2901008 1,48 80

GYM2 GPLGYM2901002 1,44 77

GTM2 GPLTM2700101 1,54 86

GTM2 WHITE GPLGTM2901601 1,5 83

GTM2 CLEAR GPLGTM2000001 1,49 83

TM2 GPLTM2704501 1,42 80

TM2 GPLTM2700101 1,36 80

Plugs injection on flexible cords• Voltage - max.1 kV• Temperature - max.70 °C

GYM2 INJECTION GPLGYM2901006

General use insulation• Voltage - max.1 kV• Temperature - max 70 °C

YI1/YI2/- according to VDE 0207TI1/TI2 - according to SR EN 50363Tip A - according to SR CEI 60502

I88 GPLI88000002 1,35 87

GYI1.2 (on extrusion rates 500m/minute) GPLGYI1200000 1,45 88

GYI1 GPLGYI1000005 1,45 85

GYI1 GPLI88000003 1,48 88

GYI1 GPLGYI1000011 1,50 91

GY801 GPLGY801000008 1,54 91

GY801 GPLGY801000001 1,57 91

GRANULE GY802 GPLP91704501 1,58 93

Sheath for cables of general use• Voltage - max.1 kV• Temperature - max 70 °C

YM1 - according to VDE 0207TM1- according to SR EN 50363ST1/ST2 - according to SR CEI 60502( ST2 with reduced volatility plasticiz-er)

M2 BLACK GPLM2901101 1,4 85

GYM1 BLACK GPLGYM1901102 1,48 88

GY801 BLACK GPLGY801000008 1,54 91

GY801 BLACK GPLGY801900403 1,56 90

GY801 BLACK GPLM2901102 1,57 91

GY801 (ST2) BLACK GPLGY801900404 1,57 91

Sheath for cables of general use• Fireproof• Temperature - max. 70 °C

YM1- according to VDE 0207TM1- according to SR EN 50363ST1/ST2 - according to SR CEI 60502( ST2 with reduced volatility plasticiz-er)

MF GPLMF704501 1,33 85

GMF 147 GPLGMF900401 1,47 87

GMF 154 GPLMF000001 1,53 88

GRANULE GMF157 GPLGMF704503 1,54 89

GMFA- fireproofing A cls. GPLGMFA000001 1,49 85

Sheath for cables of general use• Fireproof• UV resistance• Temperature - max. 70 °C

YM1- according to VDE 0207TM1- according to SR EN 50363ST1/ST2 - according to SR CEI 60502( ST2 with reduced volatility plasticizer)

GMF 154 UV GPLGMF704502 1,54 88

Field of application Type of granule Trade name Code FeaturesDensity g/cmc Hardness

SH

Sheath for cables• Low emission of halogenated gases from combustion - max. 22%• Temperature - max. 70 °C

CEI 20-11

RZ GPLI889011023 1,52 90

RZA– fireproofing A cls. GPLRZA900401 1,52 90

Cable insulation• Low emission of halogenated gases from combustion - max. 22%• Temperature - max. 70 °C

R2 GPLF602401 1,5 93

R2A GPLR2A000001 1,5 92

Sheath for cables• Temperature - max 90 °C

TM3 - according to SR EN 50363 TM3 GPLTM3000001 1,33 86

Cable insulation• Temperature - max. 90 °C

TI3 - according to SR EN 50363 TI3 GPLTI3000001 1,41 92

Sheath with increased resistance to low temperatures • Temperature - max. 70 °C

(-40 °C) TM4 - according to SR EN 50363

M40 GPLM40901102 1,3 74

GM40 GPLGYM2901601 1,45 80

(-50 °C) TM4 - according to SR EN 50363

M50 GPLM50901101 1,3 74

Cable insulation• Temperature - max. 70 °C DIV4 - according to HD 603 S1

DIV4 GPLDIV4000002 1,47 89

DIV 4- Fireproof GPLDIV4000001 1,5 90

Sheath for cables• Temperature -max 70 °C

DMV5 - according to HD 603 S1 DMV 5 GPLDMV5000001 1,45 88

DMV6 - according to HD 603 S1 DMV6 GPLDMV6900501 1,48 88

I2 Insulation -Insulation for power cables used for voltages up to 6kV

I2 CLEAR GPLI2000001 1,45 92

I2 CLEAR DINP GPLI2000002 1,45 92

I2F – fireproofing C class GPLI2F000001 1,45 92

Insulation for telephone cables used for voltages up to 1kV

I6 GPLI6000001 1,45 90

I3 Insulation-Insulation for power cables used for voltages up to 10kV

I3 GPLI3000002 1,52 94

Filler - used between the sheath and insulation SDR GPLSDR000001 1,63 -

SDR GPLSDR000006 1,85 -

Fireproofing SDRF GPLF302001 1,85 -

For temperatures of 90 °C SDR GPLSDR90000001 1,87 -

Cable insulation for automotive industry used for voltages up to 1kV• Temperature - max. 105 °C

I105 GPLI105000002 1,3 89

ISO 6722 I Auto B class GPLIAUB000001 1,36 92

Oil resistant sheath for cables• Voltage - up to 1 kV• Temperature - max. 70 °C

TM5 - according to SR EN 50363

GTM5 GPLGTM5901001 1,41 80

caTalog Tehnic

PVc granules pg.4/5

Electric use Granules

Technical caTalog

Plasticized Granules

for shoes sole(colored or transparent)

Transparent plasticized

granules for hose

Sole granules

Granulesfor hose

Type of Granules

Density (g/cm3)

Hardness Shore (Sh A)

Tensile strength (N/mm2)

Elongation at break

YT with NBR 1,15÷1,3 61 ÷ 65 8 300 %

YT0 1,15÷1,25 51 ÷ 55 8 300 %

YT1 1,15÷1,25 56 ÷ 60 8 300 %

YT2 1,15÷1,3 61 ÷ 65 9 280 %

YT3 1,2÷1,3 66 ÷ 70 10 260 %

YT4 1,2÷1,3 71 ÷ 75 12 250 %

YT5 1,25÷1,35 76 ÷ 80 12 250 %

Trade name

Code Hardness Shore (Sh A)

Tensile strength (N/mm2)

Elongation at break

YT2 CLEAR GRANULES

GPLF901001 61 ÷ 65 9 250 %

YT3 CLEAR GRANULES

GPLYT5TRAN06 66 ÷ 70 10 250 %

YT5 CLEAR GRANULES

GPLYT5900401 76 ÷ 80 12 250 %

• Extrusion of protection tubes for electrical cables, according to SR EN 61386-21/CEI 61386-21;• Extrusion of plastic ducts for electrical cables, according to SR EN 50085;

• Extrusion of paneling systems according to SR EN 13245 (used for interiors / exteriors - white);• Injection of accessories used for PVC joinery production;• Any other extrusion and injection applications.

Technical specification

Applications

RIGID GRANULES

PVC granules pg.6/7

Type of Granules Color Density (g/cm3)

Thermo stability at 200°C (minutes)

Vicat

Extrusion of protective tubes for electric cables

White, RAL 7035 1,4 ÷ 1,65 ≥ 30 ≥ 78

Extrusion of plastic ducts for electrical cables RAL 9001, RAL 9010

1,5 ÷ 1,6 ≥ 30 ≥ 78

Fittings injection RAL 8023, RAL 7037

1,42÷ 1,48 ≥ 30 ≥ 78

Extrusion of paneling systems White, Brown, etc. 1,48 ÷ 1,65 ≥ 30 ≥ 78

Injection of accessories used for PVC joinery production

White 1,42÷ 1,48 ≥ 30 ≥ 78

TECHNICAL CATALOG

caTalog Tehnic

Headquarters:

TERAPLAST - Industrial Park

DN15A (Reghin-Bistriţa) Km 45+500

Bistriţa Năsăud, 427298, Romania

Tel: +40263-342201 / FAX: +40263-342202

E-Mail: granule@teraplast.ro