Gramercy - Amazon S3 · 03 04 16 01 13 17 16 16 11 05 20 24 23 18 19 12 09 08 07 06 10 25 Page 02...
Transcript of Gramercy - Amazon S3 · 03 04 16 01 13 17 16 16 11 05 20 24 23 18 19 12 09 08 07 06 10 25 Page 02...
Included in the package
01 - Base Panel = 01 piece (box 3/4)
02 - Left Side Panel = 01 piece (box 2/4)
03 - Left Partition Panel = 01 piece (box 2/4)
04 - Right Partition Panel = 01 piece (box 2/4)
05 - Right Side Panel = 01 piece (box 2/4)
06 - Front of the Drawer = 02 pieces (box 3/4)
07 - Left Side Panel of the Drawer = 02 pieces (box 4/4)
08 - Right Side Panel of the Drawer = 02 pieces (box 4/4)
09 - Rear Panel of the Drawer = 02 pieces (box 4/4)
10 - Base of the Drawer = 02 pieces (box 4/4)
11 - Top Panel = 01 piece (box 3/4)
12 - Smaller Crossbar = 02 pieces (box 4/4)
13 - Larger Crossbar = 02 pieces (box 3/4)
14 - Smaller Partition = 01 piece
15 - Smaller Shelf = 01 piece (box 3/4)
16 - Larger Shelves = 03 pieces (box 4/4)
17 - Medium Shelf = 01 piece (box 3/4)
18 - Left Support of the Drawer’s Slide = 01 piece (box 4/4)
19 - Right Support of the Drawer’s Slide = 01 piece (box 4/4)
20 - Doors = 06 pieces (box 1/4)
21 - Smaller Back Panel= 01 piece (box 3/4)
22 - Larger Back Panel = 02 pieces (box 3/4)
23 - Smaller Aluminum Hanger Bar = 01 piece (box 3/4)
24 - Larger Aluminum Hanger Bar = 03 pieces (box 3/4)
25 - Handle = 06 pieces (box 3/4)
(box 3/4)
02
22
2115
14
03
04
16
01
13
17
16
1611
0520
24
23
18
19
12
0908
07 0610
25
Page
02Gramercy
Wardrobe
Included in the package
Tools needed
(not included) Screw driver
E = 08xA = 108x D = 12xB = 46x C = 44x F = 28x
Front view
Rear view
J = 08xG = 28x H = 08x I = 74x K = 08x L = 08x
11 lb
11 lb
11 lb
11 lb
11 lb
11 lb
11 lb
15.4 lb
All the hanger
bars 15.4 lb.
Hardware (box 4/4)
O = 28x
M = 22x
N = 08x P = 18x R = 02xQ = 02x S = 02x
Page
03Gramercy
Wardrobe
Phillips screw driver
Try square
Step 02
Step 01
02
05
04
14
H
H H
HC
C
CC CC
C C
C
C
C
CC
CC
C
N NN
N
NC
C
Fix the hardware (H) onto the parts (02)
and (05) with the hardware (C ). Fix the
hardware (N) onto the parts
(02), (05), (04) and (14)
with the hardware (C).
CC
CC
CC
CC
H
H
H
13
13
Connect the part (12) onto the part (13)
with the hardwares (F + G).
Fix the hardware (H) onto the
part (13) with the
hardware (C).
Attention!
The wardrobe must be assembled in the vertical position.
H
12
12
13
13
FG
F
G
GG
F
F
F
F
F
F
GG
GG
12F
G
F
G
*Observe the position of the
part 12, the indicated drill must
be to the up side!
Page
04
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Gramercy
Wardrobe
Step 04
Step 03
12
12
01
B
B
B
BConnect the part (01) onto the part (12)
with the hardware (B).
Fix the hardware (N) onto the parts
(03) and (04) with the hardware (C).
Connect the part (16) onto the parts
(03) and (04) with the hardware (B).
Connect the parts (03) and (04) onto the
part (01) with the hardware (F + G).
Observe the
shoes position.
03
04
16
01
F
F
F
F
G
G
G
Page
05
Drill
Drill
Drill
Drill
C
C
N
NC
C
03
04
16
B
B
B
B
Rear Side
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Rear Side
Gramercy
Wardrobe
Step 06
Step 05B
B
B
B
B B
B
B
B
B
B
L
L
05
04 16
16
17
01
13
Connect the part (05) onto the parts (01)
and (13) with the hardware (B + L).
After, connect the part (17) and (16)
onto the parts (04) and (05)
with the hardware (B).
04
19 J
J
JJ
Using the hardware (J) and the hardware
(E) connect the part (18) onto the
part (03) and the part (19)
onto the part (04).
Fix the hardware (N) onto
the parts (03) with
the hardware (C ).
*Observe the right position of
the parts (18) and (19).
E
E
E
E
03
18J
J
JJ
E
E
E
E
C
CN
*How to use the hardware B + L.
First, put the hardware L into the drill.
(pay attention to the position
of the hardware L)
Page
06
Rear Side
Rear Side
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Gramercy
Wardrobe
Step 03Step 08
Step 07
L
BB
B
B
BB
02
13
01
Connect the part (02) onto the parts (01)
and (13) with the hardware (B + L).
15
14
14
01
01
14
15
B
B
F
F
FF
G
G
G
G
02
Connect the part (14) onto the part (01)
with the hardware (F + G).
Connect the part (15) onto the part (14)
with the hardware (F + G).
Connect the part (15) onto the
part (02) with the hardware (B).
Page
07
Re
ar
Sid
e
Re
ar
Sid
e
Rear Side
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Re
ar
Sid
e
Gramercy
Wardrobe
Step 03Step 10
Step 09
GF
B+L
B+L
B+L
B+L
L
02
05
1111
03 04
First, apply the hardware F into the part 11.
Connect the part (11) onto the
parts (03) and (04) with
the hardware (F + G).
Connect the part (11) into the parts (02)
and (05) with the hardware (B + L).
02
04
05
03
24
24
24
23
Connect the parts (23) and (24)
into the hardware (N).
03
04
Page
08
Rear Side
Gramercy
Wardrobe
F
F
F
F
11
After installed the hardware (F), turn the
part (11) upside down to proceed.
Re
ar
Sid
e
Step 03Step 12
Step 11
I
22
21
22
Before starting the process, use a try square to
align the parts (22), (11), (05) or (02), after
08
07
09
B
B
B
B
10
Connect the parts (07), (08) and (09) with the hardware (B).
Apply the part (10)
in the groove of the
parts (07) and (08)
until the groove
of the part (09).
M+I
22
21
22
Connect the parts (21) and (22)
with the hardware (M) and (I).
M
II
Page
09Gramercy
Wardrobe
05
11
connect the parts (22) with the hardware (I)
keeping the alignment, and
repeat the process on the
part (21).
02
Re
ar
Sid
e
Rear Side
Rear Side
Use the hardware (C) with the
hardware (K) as shown
on detail.
C
C C
CK
K K
K0906
Step 13
Step 03Step 14
06
08
07
F
F
GF
F
G
G
O
GO
OO
Connect the parts (07), (08) and (06)
using the hardware (F + G).
Observe that the hardware K + C
are applied in the parts 06 and 09.
Page
10
Rear of th
e drawer
Front of th
e drawer
Gramercy
Wardrobe
Step 15
Install the drawer fitting it into
the slides fixed on the side
of parts (03) and (04).
03
04
Page
11
Apply the Stickers, hardware (O) onto the
hardware (G) and the hardware (L), all of them.
O
G OL
Gramercy
Wardrobe
Attention!
Before installing the tip-over system, it is mandatory
that the wardrobe be in the right place in the room.
C = 04x S = 02xQ = 02x R= 02x
Attention! Tip-over System
11
First approach the wardrobe
as close as possible to the wall.
Page
12Gramercy
Wardrobe
Wa
ll
Q
Using a pencil, mark where you should
drill the wall with a 3/8" drill bit
to put in the hardware (R).
Page
13Gramercy
WardrobeAttention! Tip-over System
Hardware (R), plugged in the wall.
Pass the hardware (S) through the
hardware (Q) until the hardware (R)
plugged in the wall.
R
Q
S
*press the hardware wings (R) to put in the
hole that you drilled in the wall.
R
wings
wings
Q
C11
Wa
ll
Be sure that the wardrobe is on the final position!
Then fix the hardware (Q) onto the part (11)
with the hardware (C).
C
Q
A
A
P
20
A
A
P
A
A
A
A
P
P
Page
14
Watch the video!
You must align the hardware (P)
parallel with the edge
of the door (20).
Fix the hardware (P) onto
the part (20) with
the hardware (A).A
A
P
ali
gn
pa
rall
el
ed
ge
Gramercy
Wardrobe
Door assembly andadjustment
Attention!
Is the wardrobe in the right place?
If yes go ahead installing the doors.
Repeat the procedure on all the doors!
Page
15
P
A
A
Connect the part (20) onto
the parts (05), (04),
(03) and (02) with
the hardware (A).
Attention:
Fix the hardware (A)
in the indicated hinge hole.
20
02
03
04
05
20
D
D
25
Connect the part (25) onto
the part (20) with
the hardware (D).
Repeat the procedure to
install all the doors!
Repeat the procedure to
install all the handles!
Use the screw (D) until it
pass through
the door from
inside to outside.
D
D
20
20
Gramercy
Wardrobe
Page
16Gramercy
Wardrobe
Doors adjustment process
To adjust the alignment of the doors loosen
the indicated screw and adjust the 3 hinges
up or down on each door, and after aligned
retighten all the screws.
Page
17Gramercy
Wardrobe
Step 01
Start aligning all the doors using as reference the Top Panel (11).
aligned
Correct adjustment!
disaligned
Page
18Gramercy
Wardrobe
Step 02
Adjusting the distance between the doors.
To adjust the distance between the doors
turn the indicated screw to the clockwise
or counterclockwise.
Page
19Gramercy
Wardrobe
Step 03
To adjust the nearby of the doors to the wardrobe
loosen the indicated screw and adjust the hinge
forward or backward, then retighten the screw.
Top view of the wardrobe
disaligned doors
Adjusting the distance between the doors of the wardrobe
Top view of the wardrobe
aligned doors
It is necessary to check all the hinges!
Page
20Gramercy
Wardrobe
Congratulations!
Attention!
To finish the assemblage, and after all the doors adjusted,
fix the hardware (A) in the indicated hinge holes.
Repeat the process for
all the hinges.