GRACO OIL & GREASE PUMPS

2

Graco oil PumPs

air operated Piston Pumps for oil• Noncorrosiveairmotordesignforlongerlife• Nometaltometalcontactmeanslongerpumplifeandensurespumpwillwithstandharshenvironments• Doubleactingpumpprovidesreliablefluidflow• Fewmovingpartstranslatesintolowmaintenanceandlowcosttoowner• Openexhaustportprovidescontinuousoperationwithouticing• Mediumtolowvolumeandpressurelubricanttransfer-handlespetroleumandsyntheticbasedoils

series K10:1RatioFire-Ball425Pump

3

specificationsMaximumworkingpressure 1800psi(124bar)Fluidpressureratio 10:1Airoperatingrange 40to180psi(2.8to12.4bar)Airconsumption approx13ft3/minpergallonpumped

(6m3/hourperlitrepumped)at100psi(6.9bar)

Pumpcyclespergallon(litre) 20(5.3)Maximumrecommendedcontinuouspumpspeed 60cycles/min;

3gpm(11.4litre/min)Recommendedspeedforoptimumpumplife 15to25cyclesperminSounddata 78.0dBAsoundpower

at100psiair40cyclesperminute

Pistonseals polyurethanewithnitrilespreaderRodseals polyurethanewithnitrilespreaderWettedparts aluminium,steel,polyurethane,nitrileWeight(model205626,universalpump) 28.7lb(13.0kg)

Graco oil PumPs

1/2-in.npt airinlet

3/4-in.nptmufflerport

Model20562625.8 in.

(655 mm)

3/4-in.npt fluidoutlet

18.4 in.(467 mm)

7.4 in.(188 mm)

Model22206532.3 in.

(820 mm)

Model22209536.6 in.

(929 mm)

Note: Forsealed tankmounting usegasket192658.

10:1 Fire-Ball® 425 Pumpmodels 205626, 222065, & 222095

1/2-in.npt airinlet

8.0 in.(203 mm)

3/4-in.nptmufflerport

26.4 in.(670 mm)

3/4-in.npt fluidoutlet

Note: For sealedtank mounting,use gasket192658.

specificationsMaximumworkingpressure 1800psi(76bar,7.6MPa)Fluidpressureratio 6:1Airoperatingrange 40to180psi

(3to12bar,0.3to1.2MPa)Airconsumption 7ft3/minpergallonpumped,

(0.051m3/hourperlitrepumped)at100psi(7bar,0.7MPa)

Pumpcyclespergallon(litre) 14.5(3.8)Maximumrecommendedcontinuouspumpspeed 78cycles/min;

6gpm(23litre/min)Recommendedspeedforoptimumpumplife 15to25cyclesperminPistonseals polyurethanewithnitrilespreaderRodseals polyurethanewithnitrilespreaderWettedparts aluminium,steel,polyurethane,nitrileWeight(model205626,universalpump) 35lb(21kg)*Soundpressurelevel 79.5dB(A)*Sound pressure measured at 30 cycles per minute at 100 psi (7 bar, 0.7 MPa) air inlet pressure per ISO Standard 3744.

6:1 Fire-Ball® 425 Pumpmodel 238108

4

Graco oil PumPs

3:1 Fire-Ball® 425 Pumpmodel 237526

specificationsMaximumworkingpressure 540psi(37bar,3.7MPa)Fluidpressureratio 3:1Airoperatingrange 40to180psi

(2.8to12bar,0.28to1.2MPa)Airconsumption 3ft3/minpergallonpumped,

(0.022m3/hourperlitrepumped)up to 8 ft3/min (0.058 m3/min) with pump

operating within recommended rangePumpcyclespergallon(litre) 6(1.6)Maximumrecommendedcontinuouspumpspeed 66cycles/min;

12gpm(45litre/min)Recommendedspeedforoptimumpumplife 15to25cyclesperminPistonseals polyurethaneRodseals polyurethaneWettedparts nitrileWeight(model205626,universalpump) 46lb(21kg)*Soundpressurelevel 82dB(A)*Sound pressure reading taken with pump operating at 60 cycles per minute at 100 psi (7 bar, 0.7 MPa). Sound pressure measured per CAGI-PNEUROP, 1971.

specificationsMaximumworkingpressure 180psi(12.4bar,1.2MPa)Fluidpressureratio 1:1Airoperatingrange 40to180psi

(2.8to12.4bar,0.28to1.2MPa)Airconsumption approximately1.5cfm

(0.042m3/min)at1gpm(3.8lpm)at100psi(0.7MPa,7bar)airpressure

Sounddata*Soundpressurelevel 74.9dB(A)Soundpowerlevel 83.5dB(A)Effectivepistonarea 1.48sqin.(9.55sqcm)Pistonroddiameter 1.375in.(34.9mm)Strokelength 4in.(101mm)Wettedparts carbonsteel,aluminium,

urethane,UHMWPEApproximateweight(model222051) 8lb(3.6kg)Maximumtemperature 180°F(82˚C)*Sound measurements were taken at 100 psi air (7 bar, 0.7 MPa) inlet pressure at 40 cycles per minute per ISO Standard 3744.

1:1 Fast-Ball™ Pumpsmodel 222051

11.0 in.(279 mm)

groundingscrew

3/4-in. npt(f)muffler port

1/2-in. npt(f)air inlet

29.4 in.(747 mm)

3/4-in. npt(f)fluid outlet

1 1/2-in. npt(f)fluid intake

Note: For sealedtank mounting, usegasket 192658.

15.7 in.(400 mm)

7.4 in. (187 mm)

1/4npt(f)

3/4 npt(f)

1 1/2 npt(f) 46.6 in.(1183 mm)

Model 222104

grounding screw

extension tube

stand-off

5

Graco oil PumPs

3/8 in.npt(f) airinlet

Overall Length: 20.7 in. (526 mm)

8.9 in.(226 mm)

groundingscrew

1/2 in. npt(f)fluid outlet

3/8 in.npt(f) airinlet grounding

screw

Model 20425438.1 in. (968 mm)

Model 22208748.1 in. (1222 mm)

1/2 in.npt(f)fluidoutlet

5:1 Fire-Ball® 300 Pumpmodels 203876, 222087 & 204254

specificationsMaximumworkingpressure 900psi(62bar,6.2MPa)Fluidpressureratio 5:1Airoperatingrange 40to180psi(2.8to12bar,0.28to1.2MPa)Airconsumption 13ft3/minforfirstgpmpumped

(0.096m3/minforfirstlpmpumped)at100psi(7bar,0.7MPa)

up to 8 additional ft3/min for each additional gpm(0.096 m3/min for each additional lpm)

with pump operated within recommended rangePumpcyclespergallon(litre) 30(7.9)Maximumrecommendedcontinuouspumpspeed 130cycles/min

5gpm(19litre/min)Recommendedspeedforoptimumpumplife 70cyclesperminWettedparts steel,urethane,aluminium,buna-NApproximateweight(model203876) 17lb(7.7kg)Soundpressurelevel(measuredat1metrefromunit) 79.5dB(A)SoundSoundpowerlevel(testedinaccordancewithISO9614-2) 85.6dB(A)

model 222087 & 204254, series N model 203876, series N

6

Graco Grease PumPs

air operated Piston Pumps for Grease• Noncorrosiveairmotordesignforlonglife• Doubleactingpumpensuressmoothfluidflow• Robustgreaseinletcagewithstandsthemostabusivehandling• Mediumtohighpressure,lowtomediumvolumegreasedispense–handlesgreaseuptoNLGI#2

series aRatio10:1

7

Graco Grease PumPs

specificationsFluidpressureratio 50:1Airpressureoperatingrange 40to150psi(3to10bar,0.3to1.0MPa)Maximumworkingpressure 7500psi(517bar,51.7MPa)Maximumdelivery 0.5gpm(1.9lpm)Cyclespergallon(perlitre) 110(28)Max.recommendedpumpspeed 60cyclesperminuteAirmotoreffectivediameter 4.25in.(108mm)Strokelength 4in.(102mm)Airconsumption approx19cfm(0.53m3/min)

at1gpm(3.8lpm)at70psi(0.48MPa,4.8bar)airpressureWettedparts steel,brass,aluminium,leatherWeight model205394;34lb(15kg)

model205395;37lb(17kg)Sounddata*Soundpressurelevelmeasuredat1mfromunit 80.85dB(A)SoundpowerleveltestedinaccordancewithISO9614-2 94.62dB(A)*Sound data measured with input air pressures at 15 cycles per minute at 100 psi (7 bar, 0.7 MPa).

Priming Piston

6–1/2” (165.1 mm)Diameter

3/8 npt FluidOutlet

41–1/4”

26–11/16”

(1048 mm)

(678 mm)

14–9/16”(369.9 mm)

1/2 npt(f)Air Inlet

50:1 Fire-Ball® 425 Pumpsmodels 205394 & 205395

model 205394, series e model 205395, series N

Priming Piston

6–1/2” (165.1 mm)Diameter

3/8 npt FluidOutlet

48–3/16”

33–5/8”

(1224 mm)

(854.1 mm)

14–9/16”(369.9 mm)

1/2 npt(f)Air Inlet

8

Graco Grease PumPs

model 239729, series B model 239730, series B

75:1 Fire-Ball® 425 Pumpsmodels 239729 & 239730

specificationsFluidpressureratio 75:1Airpressureoperatingrange 40to100psi

(0.3to0.7MPa,2.8to7bar)Maximumworkingpressure 7500psi(517bar,52MPa)Maximumdelivery 0.33gpm(1.3lpm)Cyclespergallon(litre) 165(42)Maxrecommendedpumpspeed 60cycles/minAirmotoreffectivediameter 4.25in.(108mm)Stroke 4in.(102mm)Airconsumption approx26cfm(0.72m3/min)

at1gpm(3.8lpm)at70psi(0.5MPa,4.8bar)Wettedparts steel,brass,aluminium,leatherWeight

Model239729 34lb(15kg)Model239730 37lb(17kg)

Sounddata*Soundpressurelevelmeasuredat1mfromunit 80.85dB(A)SoundpowerleveltestedinaccordancewithISO9614-2 94.62dB(A)*Sound data measured with input air pressures at 15 cycles per minute at 100 psi (7 bar, 0.7 MPa).

6.5” (165.1 mm)diameter

3/8 npt fluidoutlet

41.25”1048 mm

26–11/16”678 mm

14–9/16”(369.9 mm)

1/2 npt(f)air inlet

6.5” (165.1 mm)diameter

3/8 npt fluidoutlet

48–3/16”(1224 mm)

33–5/8”855 mm

14–9/16”(369.9 mm)

1/2 npt(f)air inlet

9

Graco Grease PumPs

specificationsFluidpressureratio 10:1Airpressureoperatingrange 40-180psi(3-12.4bar,0.3-1.2MPa)Maximumworkingpressure 1800psi(124bar,12.4MPa)Maximumdelivery 5.2gpm(19.7lpm)Cyclespergallon(perlitre) 20(6)Maxrecommendedpumpspeed 60cyclesperminuteAirmotoreffectivediameter 4.25in.(108mm)Stroke 4in.(102mm)Airconsumption approx.13cfmpergallon(6m3/hr/litre)offluidat100psi(0.7MPa,7bar)Wettedparts steel,brass,aluminium,leather,buna-NWeight 38lb(17kg)

10:1 Fire-Ball® 425 Pumpsmodels 965124 & 965129

10

Graco Grease PumPs

specificationsMaximumworkingpressure 8400psi(580bar,58MPa)Fluidpressureratio 50:1Airoperatingrange 30to140psi

(3to9.7bar,0.3to0.97MPa)Airconsumption 22.8cfm(0.638m3/min)

at0.25gpm(0.95litre/min)at100psi(0.7MPa,7bar)

Gallons(litres)perpumpcycle 0.003(0.0109)Maxrecommendedpumpspeed 76cyclesperminute

at0.22gpm(0.82litre/min)Wettedparts steel,brass,aluminium,acetal,

nitrilerubber,polyurethaneSoundpressurelevelmeasuredat1mfromunit 77.8dB(A)SoundpowerleveltestedinaccordancewithISO9614-2 85.6dB(A)Approxweight 22lb(10kg)

50:1 Fire-Ball® 300 Pumpsmodels 239877, 239887 & 239888

model 239887, series D120lbdrumsize

model 239877, series Dpaillength

model 239888, series D400lbdrumsize

Model 239888400 lb drum size

Model 239887120 lb drum size

Model 239877pail length

Overall length:45.4 in. (1153 mm)

Overall length:38.4 in. (975 mm)

Overall length: 31 in. (788 mm)

33.6 in.(853 mm)

26.7 in.(678 mm)

17.5 in.(445 mm)

grounding screw

1/4 npt(f)fluid outlet

grounding screwgrounding screw

1/4 npt(f)fluid outlet

1/4 npt(f)fluid outlet

3/8 npt(f)air inlet

3/8 npt(f)air inlet 3/8 npt(f)

air inlet

9039B

11

Graco Grease PumPs

Graco NXT Technology – Discover the Next Generation of Power and Performance• NewNXTtestedtooutperformotherpumpsonthemarket,providesmaterialtracking,system

diagnosticsandrunawaycontrolwithDataTrak–themarketsFirstintegratedlocalmonitoringsystem.

• Offerspositivedisplacement,2-balland4-ballpistondesignforuniformandeasilycontrolleddelivery.

• Designedforimprovedserviceabilitywithfewerparts,fasterrepairsandlowercostofownership.

• NewNXTairmotorproventolast10timeslongerthenitspredecessors–Bulldog/Senator/King.

• Builttolastthetoughestfinishingapplications,de-icingfeature,easyaccesstocontrolsandreducesnoise.

Built by cooper Fluid systems

optionalNeW DataTrak™ control• Runawayprotection• Pumpdiagnostics• Materialusage

NeW NXT air motor• Modulardesignforeasiermaintenance• Ruggedbodyarmourwon’trustordent• Highesttechnologyairmotoronthemarket• Threeexhauststylesavailable-Lownoise-Remote-De-icing

optionalNeW integrated air controls• Lockableeasy-turnregulator• Front-mountedforconvenientaccess

• Compactandmodular• Built-infiltration

NeW NXT air motor• Modulardesignforeasiermaintenance• Ruggedbodyarmourwon’trustordent• Highesttechnologyairmotoronthemarket• Threeexhauststylesavailable

optionalNeW DataTrak™ control

-Lownoise-Remote-De-icing

• Pumpdiagnostics• Materialusage

optionalNeW integrated air controls

NeW modular air Valve• De-icingcontrolsstandard• Upto50%quieterthanpreviousmodels

• Eliminatesstalling• Easytorepair

PERTH OFFICEPO Box 231, Cloverdale WA 698525 Redcliffe Road, Redcliffe WA 6104Telephone (08) 6272 5333Facsimile (08) 6272 5350Email cfsperth@cfs.cgl.com.au

KALGOORLIE OFFICEUnit 2, 35 Great Eastern Hwy, Kalgoorlie WA 6430Telephone (08) 9021 4000Facsimile (08) 9021 3999Email cfskalgoorlie@cfs.cgl.com.au

ADELAIDE OFFICE19 Richard Street, Hindmarsh SA 5007Telephone (08) 8346 2705Facsimile (08) 8346 7443Email cfsadelaide@cfs.cgl.com.au

BRISBANE OFFICEPO Box 257, Carole Park QLD 4300152 Cobalt Street, Carole Park QLD 4300Telephone (07) 3258 7222Facsimile (07) 3258 7200Email cfsbrisbane@cfs.cgl.com.au

TOOWOOMBA OFFICELot 13 Tews Court, Toowoomba QLD 4350Mobile 0417 930 591

MACKAY OFFICEPO Box 691, Mackay QLD 47408 Michelmore Street, Paget QLD 4740Telephone (07) 4952 4844Facsimile (07) 4952 4011Email cfsmackay@cfs.cgl.com.au

GLADSTONE OFFICEUnit 7A 2 Dennis Street, Boyne IslandMobile Workshop 0400 203 400Mobile Sales 0410 220 919

TOWNSVILLE OFFICEPO Box 8020 GBC, Garbutt QLD 481438 Toll Street, Bohle QLD 4818Telephone (07) 4774 3455Facsimile (07) 4774 4902Email cfstownsville@cfs.cgl.com.au

www.cooperfl uidsystems.com.au

P h 1 3 0 0 0 2 6 6 7 3for your nearest location

AUSTRALIA’SHYDRAULICANDLUBRICATIONSPECIALISTSADivisionofCoventryGroupLtdABN37008670102